PART I

 

This Annual Report on Form 10-K includes the accounts of The Coretec Group Inc. (individually referred to as “the Group”), an Oklahoma corporation, together with its wholly owned subsidiary, Coretec Industries LLC, a North Dakota limited liability corporation (individually referred to as “Coretec”). References in this Report to “we”, “our”, “us” or the “Company” refer to The Coretec Group Inc. and its consolidated subsidiary unless context dictates otherwise.

 

FORWARD LOOKING STATEMENTS

 

Certain statements in this report, including information incorporated by reference, are “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, Section 21E of the Securities Exchange Act of 1934, as amended, and the Private Securities Litigation Reform Act of 1995, as amended. Forward-looking statements reflect current views about future events and financial performance based on certain assumptions. They include opinions, forecasts, intentions, plans, goals, projections, guidance, expectations, beliefs or other statements that are not statements of historical fact. Words such as “will,” “may,” “should,” “could,” “would,” “expects,” “plans,” “believes,” “anticipates,” “intends,” “estimates,” “approximates,” “predicts,” “forecasts,” “potential,” “continue,” or “projects,” or the negative or other variation of such words, and similar expressions may identify a statement as a forward-looking statement. Any statements that refer to projections of our future financial performance, our anticipated growth and trends in our businesses, our goals, strategies, focus and plans, and other characterizations of future events or circumstances, including statements expressing general optimism about future operating results and the development of our products, are forward-looking statements.

 

Although forward-looking statements in this Annual Report on Form 10-K reflect the good faith judgment of our management, such statements can only be based on facts and factors currently known by us. Consequently, forward-looking statements are inherently subject to risks and uncertainties and actual results and outcomes may differ materially from the results and outcomes discussed in or anticipated by the forward-looking statements. Factors that could cause or contribute to such differences in results and outcomes include, without limitation, those specifically addressed under the heading “Risk Factors” below, as well as those discussed elsewhere in this Annual Report on Form 10-K. Readers are urged not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K. We file reports with the Securities and Exchange Commission (“SEC”). The public can read and copy any materials we file with the SEC at the SEC's Public Reference Room at 100 F Street, NE, Washington, DC 20549. You can obtain additional information about the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains an Internet site (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including us.

 

We undertake no obligation to revise or update any forward-looking statements in order to reflect any event or circumstance that may arise after the date of this Annual Report on Form 10-K. Readers are urged to carefully review and consider the various disclosures made throughout the entirety of this Annual Report on Form 10-K, which attempt to advise interested parties of the risks and factors that may affect our businesses, financial condition, results of operations and prospects.

 

ITEM 1. BUSINESS

 

Organizational History 

 

On June 22, 2017, The Coretec Group Inc. (the “Group” or the “Company”) filed an Amended Certificate of Incorporation with the Secretary of State of the State of Oklahoma to change its name from “3DIcon Corporation” to “The Coretec Group Inc.”, which became effective on June 29, 2017.

  

The Group, formerly known as 3DIcon Corporation, was incorporated on August 11, 1995, under the laws of the State of Oklahoma. Prior to September 30, 2016, the Group’s primary activity had been the raising of capital in order to pursue its goal of becoming a significant participant in the development, commercialization and marketing of next generation 3D display technologies. 

 

 

On September 30, 2016 Coretec became a wholly owned subsidiary of the Group, and the Group issued an aggregate 15,870 shares of the Group’s Series B Convertible Preferred Stock. The Series B Convertible Preferred Stock was convertible into 1,914 shares, or an aggregate of 30,374,363 shares of common stock. 

 

Coretec was organized on June 2, 2015 in the state of North Dakota. It is currently developing, testing, and providing new and/or improved technologies, products, and service solutions for medical, electronic, photonic, display, and lighting markets among others. The combination of the two companies provides a significant number of opportunities to increase shareholder value by:

 

	●	Providing technological support to advance the refinement of CSpace® image material;
	●	Adding recognized expertise to the team;
	●	Creating the opportunity for near-term revenue;
	●	Adding a significant portfolio of Intellectual Property (IP); and
	●	Drug delivery

 

Overview of the Consolidated Company.

 

Coretec’s Technology. Coretec’s underlying technology is based on the production of a high value liquid silicon precursor, cyclohexasilane (“CHS”). A key advantage of CHS is that it remains in liquid form at room temperature and does not convert to a gas until heated above 400°F. This compares to materials commonly used for manufacturing silicon-based semiconductors and solar cells (monosilane or trichlorosilane) that have much lower boiling points which leads to higher cost handling and shipping. Another key advantage of CHS is that the production rate of the silicon-forming step can be increased by a factor of six relative to the currently used materials, leading to significant cost savings. We anticipate that CHS will first be used as an alternative to monosilane or trichlorosilane when adding silicon to lithium ion batteries or when used in manufacturing silicon-based semiconductors.

 

We also see longer term potential in several emerging markets where there are opportunities in the conversion of CHS into nanoparticles and nanowires for use in such emerging, high-growth markets as:

 

	●	Energy storage
	●	Solid state lighting
	●	Authentication of critical documentation
	●	Printable electronics
	●	Building-integrated solar energy

 

Enhancement of CSpace. A key challenge in the development of CSpace® is the development of the material used for the image chamber. The Company has explored a variety of glass alternatives. While progress has been made, it has been concluded that limitations remain, primarily in weight and cost.

 

A key virtue of having access to the Coretec IP portfolio of silicon-based materials is that we can now use all of the manufacturing infrastructure and knowledge that is available for optical plastics for the CSpace® image chamber. The benefit to CSpace® is that silicon-based optical plastics can be molded into a broad range of shapes and allow the image chamber to be much lighter and much lower in cost than the glass material we worked with before.

 

Near-Term Revenue Opportunities. Opportunities for near-term revenue continue to be explored in battery and microelectronic markets. Interest in the use of silicon in Li-ion batteries continues to increase driven by the growing demand for electrical vehicles and home energy storage systems for backup power. Discussions are ongoing with suppliers of Li-ion battery anode materials that are seeking next generation materials to further increase performance while improving lifetime, safety and reliability. We believe these suppliers will be well positioned to take advantage of the benefits provided by CHS when combined as a liquid with other powder-based materials. While we believe the use of CHS in Li-ion batteries will provide near term revenue, we also continue to explore revenue opportunities in microelectronics and especially those early adopter markets where advanced microelectronics are being developed in lower volumes and with less price sensitivity. 

 

 

Recent Developments. 

 

On December 27, 2019, The Coretec Group, Inc. issued 123,330,807 shares of common stock (“Common Stock”) of the Company upon the conversion of debt held by certain holders (the “Legacy Holders”), which Legacy Holders consists substantially of the Company’s Co-Chairmen, Victor Keen and Simon Calton. The total outstanding debt converted was $2,711,359 (“Legacy Debt”), which consisted of $2,017,434 in outstanding principal and $693,925 in accrued interest. The Legacy Debt was converted at a conversion price of $0.022 per share (“Conversion Price), which Conversion Price was determined by the Company’s Board of Directors (the “Board”) at a time during which the price of Common Stock was quoted significantly lower than the price quoted immediately prior to this Current Report.

 

On October 4, 2019 the Company entered into a credit agreement (the “Credit Agreement”) and related convertible promissory note with Diversified Alpha Fund of Navigator Global Fund Manager Platform SPC, a Grand Cayman entity (the “Lender”). After communications between the Company and Lender, and in preparation of the Credit Agreement, the Board agreed to and approved the conversion of the Legacy Debt into shares of the Common Stock at the Conversion Price at any time prior to December 31, 2019. In seeking the capital raise with the Lender, and in order to clean up the Company’s consolidated balance sheet, it was apparent to the Board that maintaining the Legacy Debt on the Company’s books was incompatible with the intent of the capital raise with the Lender and the continued drawdowns anticipated under the Credit Agreement. The Legacy Debt was initially arranged by the Company after a significant, yet unsuccessful, search to secure third party financing. Furthermore, since the Legacy Holders were willing to convert such Legacy Debt into shares of Common Stock, the Company, believing it to be in its best interest and a necessary component to continuing to draw down debt pursuant to the Credit Agreement, agreed with the conversion of such Legacy Debt.

 

The securities above were offered and sold pursuant to an exemption from the registration requirements under Section 4(a)(2) of the Securities Act since, among other things, the transactions did not involve a public offering.

 

Overview of Business

 

Coretec Business

 

Coretec Industries LLC, a North Dakota limited liability company, was established in 2015 to create technology-based solutions (products and services) that address energy-related market needs globally. Coretec was founded by three corporate entities: EOS Management LLC, Carlton James North Dakota, Ltd., and ChymaTek Energy Solutions, LLC. Principals supporting the business included Simon Calton, and Ronald Dombrowski. The principals have combined expertise in forming and managing technology-based startups, fundraising, sales, and marketing. They were advised by Ramez Elgammal, VP of Technology, an expert in silicon chemistry and Doug Freitag, Chairman of our Advisory Board, an expert in the application of Si materials and Federal business development.

 

Coretec’s business model is to identify and commercialize disruptive technologies in silicon and 3D visualization serving advanced technology markets in support of global grand challenges in health, environment, security and energy. Sources of disruptive technology are licensed technology created by major universities, institutes, national laboratories and other research centers. Where technology does not already exist, research is to be sponsored and jointly developed with our customers. The initial candidates for commercialization center around CHS, and a source of this technology includes silicon technologies. CHS technologies include methods to produce and process cyclohexasilane (Si6H12), “stacked” polysilane ((R2Si)n) and their alloys with various dopants into liquid silane, Si, silicon nitride, and SiC thin films, Si nanowires and Si QDs. Future technologies will include high refractive index siloxane polymers (HRISP).

  

Coretec technology will be used to form partnerships with established manufacturers and distributors in global markets of interest. Early adoption of these technologies is anticipated in markets for battery energy storage (Li-ion), solid-state lighting (LEDs), solar energy (BIPV) and printable electronics (Asset Monitoring). These respective supply chains include material suppliers, process tool suppliers, subcomponent suppliers and OEMs. We will first form strategic partnerships with specialty material suppliers with expertise in Si. Once the supply of our materials has been established, we will form partnerships with OEMs and their suppliers in the respective markets looking for a competitive advantage we believe we can provide.

 

 

Coretec Overview

 

Coretec is developing, testing, and providing new and/or improved technologies and resulting product solutions for energy-related industries including, but not limited to oil/gas, renewable energy, energy conservation, and distributed energy industries. Many of these technologies and resulting product solutions also have application to the broader markets of anti-counterfeit packaging, medical devices, electronics, photonics, and displays. The initial technologies and product solutions are based on new innovations in cyclohexasilane (Si6H12), Si QDs, “stacked” polysilane ((R2Si)n), their alloys with various dopants, and in the future, high refractive index siloxane polymers (HRISP). Early adoption of these technologies and resulting product solutions is anticipated in markets for energy storage (Li-ion batteries), solid-state lighting (LEDs), solar energy (BIPV) and printable electronics (Asset Monitoring).

 

Coretec was founded by three corporate entities:

 

●

EOS Management LLC

o

Expertise and experience in equipment and services for oil/gas industry.

 

●

Carlton James Ltd.

o

Expertise and experience in procuring and managing investments and financial services.

 

●

ChymaTek Energy Solutions LLC

o

Expertise and experience in R&D and commercialization of material and chemical technologies.

 

Business Model

 

Coretec’s business model includes monitoring the ever-growing catalogue of new technologies and valuable IP for licensing opportunities that could lead to incremental improvements and/or additional features in resulting products or lead to next generation products for use by energy-related industries and is created and held within universities and other parties that may lack financial resources and/or interest to further develop and commercialize them.

 

Additionally, where needs exist, but new technologies and resulting products are not currently available, conduct research and development (“R&D”) activities through sponsored projects performed at major universities, institutes, national laboratories and other research centers. Coretec will leverage existing, world-class expertise, experience, and laboratory facilities that reside in these non-profit, R&D entities for R&D, testing, and “proof of concept” studies up to and including at the device level that may be required to create commercialization opportunities.

 

Following these “proof of concept studies”, commercialization opportunities (e.g., manufacturing, marketing, sales) created for its technologies and IP will include, but are not limited to:

 

●

joint ventures or other business collaborations with Coretec’s joint development partners who can manufacture, market and sell new or improved products (based upon Coretec’s technologies and IP) into existing or new supply chains (that the partner company/companies already have an established, significant presence or can capture and grow market share); or

 

●

manufacturing, marketing and selling its own products; or

 

●

creating “exit strategies” such as:

o

sale of one or more technologies and IP to the private sector;

o

license and/or sublicense one or more technologies and IP to the private sector; or

o

other business transactions, e.g., merger, acquisition, spinoffs.

 

 

Research & Development

 

Coretec’s priorities for R&D and commercialization are customer/market-driven and guided by the needs and specifications of the energy-related industries served. Identified customer/market-driven opportunities include:

 

●

New and novel silicon-based materials that facilitate “greener” more eco-friendly energy production, including:

 

o

lower cost, longer life, higher capacity battery energy storage systems, e.g., Li-ion batteries (LiBs), for use in transportation and distributed power generation systems;

o

more aesthetically appealing, lower cost building integrated photovoltaics (BIPV); and

o

flexible and/or printable electronics for use in monitoring the condition of distributed or remote assets, e.g., wind power and embedded, wireless sensors to detect corrosion and other changes in pipelines.

 

●

New and novel silicon-based materials that facilitate “greener” more energy efficient products, including encapsulation of high brightness LEDs to improve light extraction and solar cells to improve full spectrum light collection;

 

●

New and novel silicon-based materials that facilitate more efficient and eco-friendly exploration and monitoring of distributed energy industries, including imaging materials for visualizing oil and gas exploration and distribution data using volumetric 3D displays; and

 

●

New and novel silicon-based materials that prevent illegal imitation or reproduction of a product or service used within energy-related industries, including trusted supply (anti-counterfeit packaging) products for supply chain assurance, currency, identity documents, lottery tickets, etc.

 

Future Revenue

 

In the future, we foresee revenue coming from one or more business transactions such as:

 

●

sale of Coretec’s novel silicon-based materials that improve or otherwise enhance performance of various products, e.g., Li-ion batteries, electronics, PV/solar cells, and displays and/or other optical-based devices;

 

●

a share of the revenue coming from the sale of jointly developed product(s) and/or from one or more joint ventures with strategic partners; and/or

 

●

sale of technology/technologies and associated IP to joint development partners or other companies.

 

Competition

 

Based on our market research and competitive analysis, we have concluded that our CHS technology is unique and provides an advantage in that it should allow 1) production at high yields at low cost using readily available raw materials, 2) storage, transport and use as a liquid at room temperature 3) processing of the liquid into fibers, particles, and films that when heated forms silicon, and 4) the simple addition of dopants to the liquid at an atomic level that when heated forms doped silicon. Competing silanes provided by numerous manufacturers exist as a gas at room temperature and are explosive resulting in greater cost during storage, handling, transportation and use. Our closest competitor is cyclopentasilane which exists as a gas at room temperature and has proven costly and difficult to manufacture. Other competitors exist in specific applications. For example, graphene and carbon nanotubes are potential competitors in printable electronics but are only now emerging and require purification that is proving costly.    

Coretec’s business and commercialization model is based in part upon establishing joint development partnerships with companies that are commercially successful and financially sound as well as deeply embedded in the supply chains for the aforementioned energy-related products. For example, Coretec is developing a strategic partnership with a domestic supplier of silicon-based materials that will facilitate further development and scale-up of Si6H12 plus chemical derivatives and other materials based on Si6H12. This strategic partnership will enable Coretec to supply large quantities of these novel silicon materials to those companies interested in producing prototype batteries, electronics, and PV/solar cells for testing and commercial evaluation. Coretec will continue to seek other such strategic partnerships within the private sector.

 

 

Company Business

 

The Company is developing a patented volumetric 3D display technology that was developed by and with the University of Oklahoma (the “University”) under a Sponsored Research Agreement (“SRA”). The development to date has resulted in multiple technologies, two working laboratory prototypes (Lab Proto 1 and Lab Proto 2), and eight provisional patents; five of the eight provisional patents have been combined and converted to five utility patents. Under the SRA, the Company has obtained the exclusive worldwide marketing rights to these 3D display technologies.

 

On May 26, 2009, the United States Patent and Trademark Office ("USPTO") approved the patent called "Volumetric Liquid Crystal Display" for rendering a three-dimensional image and converted it to U.S. patent No. 7,537,345. On December 28, 2010, USPTO approved the patent called “Light Surface Display for Rendering a Three-Dimensional Image,” and issued the United States Patent No. 7,858,913. On August 21, 2012, the USPTO approved a continuation patent called “3D Volumetric Display” and issued the US Patent No. 8,247,755. These patents describe the foundation of what is called CSpace® technology (“CSpace”).

 

Company Overview

 

Commercialization Strategy and Target Applications

 

The Company plans to commercialize the CSpace volumetric 3D technology through customer funded research and development contracts and technology licensing agreements for high value applications like air traffic control, design visualization, and medical imaging. The Company plans to develop products for contract engineering and with joint development customers. At this time the Company does not have any commercialized products and does not plan to develop its own products based on the CSpace technology due to the high value / low volume nature of the best-fit initial applications for this technology. These applications include but are not limited to the following:

 

●

Healthcare (diagnostics, surgical planning, training, telemedicine, biosurveillance);

●

Cyber security data visualization;

●

Military (operational planning, training, modeling and simulation, battlespace awareness, damage assessment, autonomous piloting);

●

Physical security (passenger, luggage & cargo screening);

●

Mining, oil & gas exploration; or

●

Meteorological and oceanographic data visualization.

 

Competition

 

Based on our market research and competitive analysis to date, we have concluded that the CSpace volumetric technology is unique and advantaged versus other 3D technologies in that it can deliver both 1) a true 360 degree viewing experience for multiple simultaneous users, and 2) high image quality, high reliability and large image size. Rear projection 3D displays such as those from Zecotek, Setred, and EuroLCDs (formerly LC Tech LightSpace) do not provide a 360-degree viewing experience and are typically limited to one or two users. Early proof of concept work done on infrared active phosphor displays by 3D Display Laboratories proved to not be scalable due to limited phosphor persistence and vector scanning limitations. While holographic and light field displays show promise, they do not deliver a true 360-degree viewing experience and cost-effective multiple user systems do not appear feasible due to current and expected pixel density, data bandwidth and compute power limitations.

 

History of 3D Technology Research and Development at the University of Oklahoma

 

Beginning in 2007 the University, under an SRA with the Company, undertook the development of high potential 3D display technologies.

 

 

It is anticipated that Coretec’s technology will play a key role in the continued development of an image space material for CSpace.

 

Intellectual Property History, Status and Rights

 

The USPTO approved the pending patent called "Volumetric Liquid Crystal Display" for rendering a three-dimensional image and converted it to US patent No. 7,537,345. On July 16, 2013, USPTO approved the pending patent called “Computer System with Digital Micromirror Device,” and issued US patent No. 8,487,865.

 

CSpace Patents are as follow: On December 28, 2010, USPTO approved the pending patent called “Light Surface Display for Rendering a Three-Dimensional Image,” and issued the US Patent No. 7,858,913. On August 21, 2012, the USPTO approved a continuation patent called “3D Volumetric Display” and issued the US Patent No. 8,247,755. On December 13, 2011, USPTO approved a continuation patent called “3D Light Surface Display,” and issued the US Patent No. 8,075,139.

 

Through an SRA with the University, we have obtained the exclusive worldwide marketing rights to certain 3D display technologies under development by the University. The development to date has resulted in the University filing eight provisional patents; five of the eight provisional patents have been combined and converted to five utility US patents, one pending European patent and one pending Japanese patent.

 

In addition, the Company owns exclusively two U.S. patents as noted below.

 

Key Patents Exclusively Licensed to the Company from the University of Oklahoma:

 

United States Patents Granted

●

“3D Volumetric Display” - 8,247,755, August 21, 2012

●

“3DLight Surface Display” - 8,075,139, December 13, 2011

●

“Light Surface Display for Rendering a Three-Dimensional Image” - 7,858,913, December 28, 2010

●

“Volumetric Liquid Crystal Display”- 7,537,345, May 26, 2009

●

“Computer System with Digital Micromirror Device” – 8,487,865, July 16, 2014

 

International Patents Granted-Japan

●

“Light Surface Display for Rendering a Three-Dimensional Image” - Japanese Patent Number 5,594,718, August 15, 2014

 

International Patents Pending-Europe

●

“Light Surface Display for Rendering a Three-Dimensional Image” - European Application Number EP07755984, filed April 25, 2007

 

Key Patents Exclusively Owned by the Company:

●

“Ultra High-Resolution Volumetric Three-Dimensional Display” - 9,423,682, August 23, 2016

●

“Hloform 3D Projection Display” - 2014/02680162A1, September 18, 2014

 

Employees

 

We had seven  employees as of March 31, 2020: Mr. Michael Kraft, Chief Executive Officer, Ramez Elgammal, PhD, Vice-President of Technology, Mr. Ronald Robinson, Chief Financial Officer, Ms. Judith Keating, Company Secretary and Director of Investor Relations, Eric Halverson, Director of Finance/Consultant, Michelle Tokarz, Business Development Consultant, and Victoria Lamb, Office Manager/Corporate Secretary Consultant. None of our employees are covered by a collective bargaining agreement. We consider relations with our employees to be good.

 

 

ITEM 1A. RISK FACTORS

 

Risks Relating to Our Businesses

 

We have a limited operating history, as well as a history of operating losses.

 

We have a limited operating history. We cannot assure you that we can achieve revenue or sustain revenue growth or profitability in the future. We have a cumulative net loss of $5,494,193 for the period from inception (June 2, 2015) to December 31, 2019. Our operations are subject to the risks and competition inherent in the establishment of a business enterprise. Unanticipated problems, expenses, and delays are frequently encountered in establishing a new business and marketing and developing products. These include, but are not limited to, competition, the need to develop customers and market expertise, market conditions, sales, marketing and governmental regulation. Our failure to meet any of these conditions would have a materially adverse effect upon us and may force us to reduce or curtail our operations. Revenues and profits, if any, will depend upon various factors. We may not achieve our business objectives and the failure to achieve such goals would have an adverse impact on our business.

 

We may be unable to successfully integrate and develop the vertical synergies anticipated by or complete all obligations under the Share Exchange Agreement.

 

We may not realize all of the anticipated benefits from the Share Exchange Agreement, such as increased earnings, cost savings and revenue enhancements, for various reasons, including difficulties integrating operations and personnel, higher than expected acquisition and operating costs, unknown liabilities, inaccurate reserve estimates and fluctuations in markets. If these benefits do not meet the expectations of financial or industry analysts, the market price of our shares may decline.

 

Our research and development efforts with respect to new technologies may not result in customer or market acceptance. Some or all of those technologies may not successfully make the transition from the research and development stage to cost-effective production as a result of technology problems, competitive cost issues, yield problems, and other factors. Even if we successfully complete a research and development effort with respect to a particular technology, our customers may decide not to introduce or may terminate products utilizing the technology for a variety of reasons, including difficulties with other suppliers of components for the products, superior technologies developed by our competitors and unfavorable comparisons of our solutions with these technologies, price considerations and lack of anticipated or actual market demand for the products.

 

Our business could be harmed if we are unable to develop and utilize new technologies that address the needs of our customers, or our competitors or customers develop and utilize new technologies more effectively or more quickly than we can. Any investments made to enhance or develop new technologies that are not successful could have an adverse effect on our net revenue and operating results.

 

Fluctuations in direct or indirect raw material costs could have an adverse impact on our business.

 

The availability and prices of raw material inputs may be influenced by supply and demand, changes in world politics, unstable governments in exporting nations and inflation. The prices of our direct and indirect raw materials have been, and we expect them to continue to be, volatile. If the cost of direct or indirect raw materials increases significantly and we are unable to offset the increased costs with higher selling prices, our profitability will decline. Additionally, we may not be able to obtain lower prices from our suppliers should our sale prices decrease. Increases in prices for our products could also hurt our ability to remain both competitive and profitable in the markets in which we compete.

 

Future raw material prices may be impacted by new laws or regulations, suppliers’ allocations to other purchasers, changes in our supplier manufacturing processes as some of our products are byproducts of these processes, interruptions in production by suppliers, natural disasters, volatility in the price of crude oil and related petrochemical products and changes in exchange rates.

 

We operate in industries that are subject to significant fluctuation in supply and demand and ultimately pricing that affects our revenue and profitability.

 

For example, the LED lighting industry is in the relatively early stages of adoption and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving standards, short product life cycles and fluctuations in product supply and demand. The LED industry has experienced significant fluctuations, often in connection with, or in anticipation of, product cycles and changes in general economic conditions. As the markets for our products mature, additional fluctuations may result from variability and consolidations within the industry’s customer base. These fluctuations have been characterized by lower product demand, production overcapacity, higher inventory levels and increased pricing pressure. These fluctuations have also been characterized by higher demand for key components and equipment used in, or in the manufacture of, our products resulting in longer lead times, supply delays and production disruptions.

 

 

We operate in a highly competitive industry.

 

The silane chemical markets are global, capital intensive and highly competitive. Our competitors may have greater financial resources, as well as other strategic advantages, to maintain, improve and possibly expand their facilities, and as a result, they may be better positioned to adapt to changes in the industry or the global economy. The advantages that our competitors have over us could have a material adverse effect on our business. In addition, new entrants may increase competition in our industry, which could have a material adverse effect on our business. An increase in the use of substitutes for certain of our products also could have a material adverse effect on our financial condition and operations.

 

Environmental, health and safety regulation—Compliance with extensive environmental, health and safety laws could require material expenditures or changes in our operations.

 

Our operations are subject to extensive environmental, health and safety laws and regulations at national, international and local levels in numerous jurisdictions. In addition, our production facilities require operating permits that are subject to renewal and, in some circumstances, revocation. The nature of the chemicals industry exposes us to risks of liability under these laws and regulations due to the production, storage, transportation, disposal and sale of chemicals and materials that can cause contamination or personal injury if released into the environment.

  

A reduction or disruption in our supplies, or an incorrect forecast, could negatively impact our business.

 

Our production capacity could be affected by manufacturing problems. Difficulties in the production process could reduce yields or interrupt production, and, as a result of such problems, we may not be able to deliver products on time or in a cost-effective, competitive manner. As the complexity of both our products and our fabrication processes has become more advanced, manufacturing tolerances have been reduced and requirements for precision have become more demanding. In the past, we have experienced delays in delivery and product quality. Our failure to adequately manage our capacity or maintain product quality could have a negative impact on net sales and harm our customer relationships.

 

Furthermore, we may suffer disruptions in our manufacturing operations, either due to production difficulties such as those described above or as a result of external factors beyond our control. We manufacture combustible materials in our manufacturing process and are therefore subject to the risk of explosions and fires, which can cause major disruptions to our operations. If operations at a manufacturing facility are interrupted, we may not be able to shift production to other facilities on a timely basis or at all. In addition, certain of our products are only capable of being produced at a single manufacturing facility due to unique manufacturing requirements and to the extent that any of these facilities fail to produce these products, this risk will be increased. Even if a transfer is possible, transitioning production of a particular can take between three to six months to accomplish, and in the interim period we would likely suffer extensive or total supply disruption and incur substantial costs. Such an event could have a material negative impact on our business, financial condition and results of operations.

 

Our ability to meet customer demands also depends on our ability to obtain timely and adequate delivery of materials, parts and components from our suppliers. From time to time, suppliers may extend lead times, limit the amounts supplied to us or increase prices due to capacity constraints or other factors. Supply disruptions may also occur due to shortages in critical resources, such as lithium aluminum hydride, other specialized chemicals or energy or other general supplier disruptions. A reduction or interruption in supplies or a significant increase in the price of one or more supplies could have a material negative impact on our business, financial condition and results of operations. 

 

 

If we do not keep pace with technological innovations, our future products may not remain competitive and our operating results may suffer.

 

We operate in rapidly changing highly competitive markets. Technological advances, the introduction of new products and new design techniques could adversely affect our business unless we are able to adapt to changing conditions. Technological advances could render our solutions less competitive or obsolete, and we may not be able to respond effectively to the technological requirements of evolving markets. Therefore, we will be required to expend substantial funds for and commit significant resources to enhancing and developing new technology which may include purchasing advanced design tools and test equipment, hiring additional highly qualified engineering and other technical personnel, and continuing and expanding research and development activities on existing and potential human interface solutions.

 

We may not be able to achieve the target specifications for the second and third generation CSpace laboratory prototypes.

 

The process of developing new highly technical products and solutions is inherently complex and uncertain. It requires accurate anticipation of customers’ changing needs and emerging technological trends. We must make long-term investments and commit significant resources before knowing whether these investments will eventually result in products that achieve customer acceptance and generate the revenues required to provide desired returns. If we fail to achieve and meet our target specifications in the development of the second and third generation CSpace laboratory prototypes, we could lose market position and customers to our competitors and that could have a material adverse effect on our results of operations and financial condition.

 

We may not be able to secure the customer funding necessary to develop the CSpace Trade Show Prototype.

 

An important part of our business strategy moving forward is the development of our Lab Proto 3.  While we believe this prototype will enable us to secure customer funded development contracts whereby our customer would provide part or all of the funding necessary to develop products for or with the customer and to secure technology licensing agreements, there can be no assurances that this will occur.  If we are unable to secure customer funded development contracts, we will likely not be able to develop our CSpace Trade Show Prototype.  Without the CSpace Trade Show Prototype we will not be able to successfully implement our business strategy for our volumetric 3D Display products, which could cause harm to our competitive position and financial condition.

  

We may not be able to successfully license the CSpace technology to customers.

 

A significant portion of our expected future revenues will be generated through licensing our CSpace technology to third parties such as Boeing, Lockheed Martin, Siemens, and General Electric.  However, there is no guarantee we will be able to successfully license our CSpace technology to such companies or to other third parties.  If we fail to successfully license our CSpace technology, it could negatively impact our revenue stream and financial condition.

 

We may not be able to compete successfully in the markets applicable to our volumetric 3D display technology.

 

Although the volumetric 3D display technology that we are attempting to develop is new, and although at present we are aware of only a limited number of companies that have publicly disclosed their attempts to develop similar technology, we anticipate a number of companies are or will attempt to develop technologies/products that compete or will compete with our technologies. Further, even if we are the first to market with a technology of this type, and even if the technology is protected by patents or otherwise, because of the vast market and communications potential of such a product, we anticipate the market will be flooded by a variety of competitors (including traditional display companies), many of which will offer a range of products in areas other than those in which we compete, which may make such competitors more attractive to prospective customers. In addition, many if not all of our competitors and potential competitors will initially be larger and have greater financial resources than we do. Some of the companies with which we may now be in competition, or with which we may compete in the future, have or may have more extensive research, marketing and manufacturing capabilities and significantly greater technical and personnel resources than we do, and may be better positioned to continue to improve their technology in order to compete in an evolving industry. Further, technology in this industry may evolve rapidly once an initially successful product is introduced, making timely product innovations and use of new technologies essential to our success in the marketplace. The introduction by our competitors of products with improved technologies or features may render any product we initially market obsolete and unmarketable. If we or our partners are not able to deliver to market products that respond to industry changes in a timely manner, or if our products do not perform well, our business and financial condition will be adversely affected.

 

 

The technologies being developed may not gain market acceptance.

 

The products that we are currently developing utilize new technologies. As with any new technologies, in order for us to be successful, these technologies must gain market acceptance. Since the technologies that we anticipate introducing to the marketplace will exploit or encroach upon markets that presently utilize or are serviced by products from competing technologies, meaningful commercial markets may not develop for our technologies.

 

In addition, the development efforts of the Company and the University on the 3D technology are subject to unanticipated delays, expenses or technical or other problems, as well as the possible insufficiency of funding to complete development. Our success will depend upon the ultimate products and technologies meeting acceptable cost and performance criteria, and upon their timely introduction into the marketplace. The proposed products and technologies may never be successfully developed, and even if developed, they may not satisfactorily perform the functions for which they are designed. Additionally, these may not meet applicable price or performance objectives. Unanticipated technical or other problems may occur which would result in increased costs or material delays in their development or commercialization.

 

If we are unable to successfully retain existing management and recruit qualified personnel having experience in our business, we may not be able to continue our operations.

 

Our success depends to a significant extent upon the continued services of our Board of Directors, management officers and other technical advisors.  Our success also depends on our ability to attract and retain other key executive officers. As of March 31, 2020, we had only seven employees. If we are unable to successfully retain existing management and recruit qualified personnel having experience in our business, we may not be able to continue our operations.

 

There is substantial doubt about our ability to continue as a going concern. If we do not continue as a going concern, investors will lose their entire investment.

 

We have a limited operating history. Since our inception, we have incurred net losses. As of December 31, 2019, we had a working capital deficiency of $507,983. We believe these conditions indicate that there is substantial doubt about our ability to continue as a going concern within the next twelve months from the date of this filing. Our auditors have expressed substantial doubt about our ability to continue as a going concern. These concerns arise from the fact that we have insufficient revenues to fund development and operating expenses. If we are unable to continue as a going concern, you could lose your entire investment in us.

 

We will need significant additional capital, which we may be unable to obtain.

 

Our capital requirements in connection with our development activities and transition to commercial operations have been and will continue to be significant. As of March 31, 2020, we require approximately $1.6 million of funds through December 2020 to continue research, development and testing of our technologies, to obtain intellectual property protection relating to our technologies when appropriate, and to improve and market our technologies. There can be no assurance that financing will be available in amounts or on terms acceptable to us, if at all.

 

 

Risks Related to Our Intellectual Property

 

If we fail to establish, maintain and enforce intellectual property rights with respect to our technology and/or licensed technology, our financial condition, results of operations and business could be negatively impacted.

 

Our ability to establish, maintain and enforce intellectual property rights with respect to our technology will be a significant factor in determining our future financial and operating performance. We seek to protect our intellectual property rights by relying on a combination of patent, trade secret and copyright laws. We also use confidentiality and other provisions in our agreements that restrict access to and disclosure of its confidential know-how and trade secrets.

 

Outside the patents and pending patent applications directly granted to us, we seek to protect our technology as trade secrets and technical know-how. However, trade secrets and technical know-how are difficult to maintain and do not provide the same legal protections provided by patents. In particular, only patents will allow us to prohibit others from using independently developed technologies that are similar. If competitors develop knowledge substantially equivalent or superior to our trade secrets and technical know-how or gain access to our knowledge through other means such as observation of our technology that embodies trade secrets at customer sites that we do not control, the value of our trade secrets and technical know-how would be diminished.

 

While we strive to maintain systems and procedures to protect the confidentiality and security of our trade secrets and technical know-how, these systems and procedures may fail to provide an adequate degree of protection. For example, although we generally enter into agreements with our employees, consultants, advisors, and strategic partners restricting the disclosure and use of trade secrets, technical know-how and confidential information, we cannot provide any assurance that these agreements will be sufficient to prevent unauthorized use or disclosure. In addition, some of the technology deployed at customer sites in the future, which we do not control, may be readily observable by third parties who are not under contractual obligations of non-disclosure, which may limit or compromise our ability to continue to protect such technology as a trade secret.

 

While we are not currently aware of any infringement or other violation of our intellectual property rights, monitoring and policing unauthorized use and disclosure of intellectual property is difficult. If we learned that a third party was in fact infringing or otherwise violating our intellectual property, we may need to enforce our intellectual property rights through litigation. Litigation relating to our intellectual property may not prove successful and might result in substantial costs and diversion of resources and management attention.

 

If our technology is licensed to customers at some point in the future, the strength of the intellectual property under which we would grant licenses can be a critical determinant of the value of such potential licenses. If we are unable to secure, protect and enforce our intellectual property now and in the future, it may become more difficult for us to attract such customers.  Any such development could have a material adverse effect on our business, prospects, financial condition and results of operations.

 

We may face claims that we are violating the intellectual property rights of others.

 

Although we are not aware of any potential violations of others’ intellectual property rights, we may face claims, including from direct competitors, other companies, scientists or research universities, asserting that our technology or the commercial use of such technology infringes or otherwise violates the intellectual property rights of others. We cannot be certain that our technologies and processes do not violate the intellectual property rights of others. If we are successful in developing technologies that allow us to earn revenues and our market profile grows, we could become increasingly subject to such claims.

 

We may also face infringement claims from the employees, consultants, agents and outside organizations we have engaged to develop our technology. While we have sought to protect ourselves against such claims through contractual means, we cannot provide any assurance that such contractual provisions are adequate, and any of these parties might claim full or partial ownership of the intellectual property in the technology that they were engaged to develop.

 

If we were found to be infringing or otherwise violating the intellectual property rights of others, we could face significant costs to implement work-around methods, and we cannot provide any assurance that any such work-around would be available or technically equivalent to our potential technology. In such cases, we might need to license a third party’s intellectual property, although any required license might not be available on acceptable terms, or at all. If we are unable to work around such infringement or obtain a license on acceptable terms, we might face substantial monetary judgments against us or an injunction against continuing to use or license such technology, which might cause us to cease operations.

 

 

In addition, even if we are not infringing or otherwise violating the intellectual property rights of others, we could nonetheless incur substantial costs in defending ourselves in suits brought against us for alleged infringement. Also, if we are to enter into a license agreement in the future and it provides that we will defend and indemnify our customer licensees for claims against them relating to any alleged infringement of the intellectual property rights of third parties in connection with such customer licensees’ use of such technologies, we may incur substantial costs defending and indemnifying any customer licensees to the extent they are subject to these types of claims. Such suits, even if without merit, would likely require our management team to dedicate substantial time to addressing the issues presented. Any party bringing claims might have greater resources than we do, which could potentially lead to us settling claims against which we might otherwise prevail on the merits.

  

Any claims brought against us or any customer licensees alleging that we have violated the intellectual property of others could have negative consequences for our financial condition, results of operations and business, each of which could be materially adversely affected as a result. 

 

At this time, we do not own all of the intellectual property in Volumetric Liquid Crystal Display or Light Surface Display for Rendering Three-Dimensional Images, and, apart from the SRA with the University and the exclusive worldwide marketing rights thereto, we have no contracts or agreements pending to acquire the intellectual property.

 

Although we have obtained exclusive worldwide marketing rights to “Volumetric Liquid Crystal Display” and “Light Surface Display for Rendering Three-Dimensional Images”, two technologies vital to our business and growth strategy, we do not own all of the intellectual property in these technologies.  Although our exclusive worldwide marketing rights to these technologies stand alone and are independent of the SRA, outside of our SRA with the University, we have no pending agreements to obtain or purchase ownership over all intellectual property in these technologies.  Should the University lose their rights in such technologies or we are otherwise unable to utilize the rights obtained in such agreements it would be difficult to successfully implement our business strategy going forward and our stock value would likely decrease.

 

Our subsidiary, Coretec, does not own any patents

 

We do not currently own any patents related to our silicon-based businesses. 

 

Risks Relating to Our Current Financing Arrangements:

 

There are a large number of shares underlying our convertible debt and warrants that may be available for future sale and the sale of these shares may depress the market price of our common stock.

 

As of  March 31, 2020, we had 202,650,642 shares of common stock issued and outstanding and convertible debt outstanding that may be converted into an estimated 25,835,866 shares of common stock. We also have outstanding warrants issued to purchase 1,020,000 shares of common stock at an exercise price of $.052. The sale of the shares underlying the convertible debt and warrants may adversely affect the market price of our common stock.

 

As of March 31, 2020, we have 1,297,349,358 unissued authorized shares available. 

 

The issuance of shares upon conversion of outstanding Series A Stock, the convertible debt or the exercise of outstanding warrants may cause immediate and substantial dilution to our existing stockholders.

 

The issuance of shares upon conversion of our outstanding Series A Convertible Preferred Stock, convertible debt and exercise of warrants would result in substantial dilution to the interests of other stockholders since the selling stockholders may ultimately convert and sell the full amount issuable on conversion.

 

 

Risks Relating to Our Common Stock:

 

The price of our common stock is volatile and fluctuations in our operating results and announcements and developments concerning our business affect our stock price, which may cause investment losses for our stockholders.

 

The market for our common stock is highly volatile and the trading price of our stock on the OTC Pink Marketplace is subject to wide fluctuations in response to, among other things, operating results, the number of stockholders desiring to sell their shares, changes in general economic conditions and the financial markets, the execution of new contracts and the completion of existing agreements and other developments affecting us. In addition, statements or changes in opinions, ratings, or earnings estimates made by brokerage firms or industry analysts relating to our market or relating to us could result in an immediate and adverse effect on the market price of our common stock. The highly volatile nature of our stock price may cause investment losses for our shareholders. In the past, securities class action litigation has often been brought against companies following periods of volatility in the market price of their securities. If securities class action litigation is brought against us, such litigation could result in substantial costs while diverting management’s attention and resources.

 

Our common stock is subject to the "Penny Stock" rules of the SEC and the trading market in our securities is limited, which makes transactions in our stock cumbersome and may reduce the value of an investment in our stock.

 

The Securities and Exchange Commission has adopted Rule 15g-9 which establishes the definition of a "penny stock," for the purposes relevant to us, as any equity security that has a market price of less than $5.00 per share or with an exercise price of less than $5.00 per share, subject to certain exceptions. For any transaction involving a penny stock, unless exempt, the rules require:

  

●

That a broker or dealer approve a person's account for transactions in penny stocks; and

 

●

The broker or dealer receives from the investor a written agreement to the transaction, setting forth the identity and quantity of the penny stock to be purchased.

 

In order to approve a person's account for transactions in penny stocks, the broker or dealer must:

 

●

Obtain financial information and investment experience objectives of the person; and

 

●

Make a reasonable determination that the transactions in penny stocks are suitable for that person and the person has sufficient knowledge and experience in financial matters to be capable of evaluating the risks of transactions in penny stocks.

 

The broker or dealer must also deliver, prior to any transaction in a penny stock, a disclosure schedule prescribed by the Commission relating to the penny stock market, which, in highlight form:

 

●

Sets forth the basis on which the broker or dealer made the suitability determination; and

 

●

That the broker or dealer received a signed, written agreement from the investor prior to the transaction.

 

Generally, brokers may be less willing to execute transactions in securities subject to the "penny stock" rules. This may make it more difficult for investors to dispose of our common stock and cause a decline in the market value of our stock.

 

Disclosure also has to be made about the risks of investing in penny stocks in both public offerings and in secondary trading and about the commissions payable to both the broker-dealer and the registered representative, current quotations for the securities and the rights and remedies available to an investor in cases of fraud in penny stock transactions. Finally, monthly statements have to be sent disclosing recent price information for the penny stock held in the account and information on the limited market in penny stocks.

 

 

Financial Industry Regulatory Authority, Inc. (“FINRA”) sales practice requirements may limit a shareholder’s ability to buy and sell our common stock.

 

In addition to the “penny stock” rules described above, FINRA has adopted rules that require that in recommending an investment to a customer, a broker-dealer must have reasonable grounds for believing that the investment is suitable for that customer. Prior to recommending speculative low-priced securities to their non-institutional customers, broker-dealers must make reasonable efforts to obtain information about the customer’s financial status, tax status, investment objectives and other information. Under interpretations of these rules, FINRA believes that there is a high probability that speculative low-priced securities will not be suitable for at least some customers. FINRA requirements make it more difficult for broker-dealers to recommend that their customers buy our common stock, which may limit your ability to buy and sell our stock and have an adverse effect on the market for our shares.

 

Our stock is thinly traded, so you may be unable to sell your shares at or near the quoted bid prices if you need to sell a significant number of your shares.

 

The shares of our common stock are thinly traded on the OTC Pink Marketplace, meaning that the number of persons interested in purchasing our common stock at or near bid prices at any given time may be relatively small or non-existent.  As a consequence, there may be periods of several days or more when trading activity in our shares is minimal or non-existent, as compared to a seasoned issuer which has a large and steady volume of trading activity that will generally support continuous sales without an adverse effect on share price. We cannot give you any assurance that a broader or more active public trading market for our common stock will develop or be sustained, or that current trading levels will be sustained. Due to these conditions, we can give you no assurance that you will be able to sell your shares at or near bid prices or at all if you need money or otherwise desire to liquidate your shares.

 

Shares eligible for future sale may adversely affect the market.

 

From time to time, certain of our stockholders may be eligible to sell all or some of their shares of common stock by means of ordinary brokerage transactions in the open market pursuant to Rule 144 promulgated under the Securities Act, subject to certain limitations. In general, pursuant to amended Rule 144, non-affiliate stockholders may sell freely after six months subject only to the current public information requirement. Affiliates may sell after six months subject to the Rule 144 volume, manner of sale (for equity securities), and current public information and notice requirements. Any substantial sales of our common stock pursuant to Rule 144 may have a material adverse effect on the market price of our common stock.

 

We could issue additional common stock, which might dilute the book value of our common stock.

 

Our Board of Directors has authority, without action or vote of our shareholders, to issue all or a part of our authorized but unissued shares. Such stock issuances could be made at a price that reflects a discount or a premium from the then-current trading price of our common stock. In addition, in order to raise capital, we may need to issue securities that are convertible into or exchangeable for a significant amount of our common stock. These issuances would dilute the percentage ownership interest, which would have the effect of reducing your influence on matters on which our shareholders vote and might dilute the book value of our common stock. You may incur additional dilution if holders of stock options, whether currently outstanding or subsequently granted, exercise their options, or if warrant holders exercise their warrants to purchase shares of our common stock.

 

Our common stock could be further diluted as a result of the issuance of convertible securities, warrants or options.

 

In the past, we have issued convertible securities (such as convertible debentures and notes), warrants and options in order to raise money or as compensation for services and incentive compensation for our employees and directors. We have shares of common stock reserved for issuance upon the exercise of certain of these securities and may increase the shares reserved for these purposes in the future. Our issuance of these convertible securities, options and warrants could affect the rights of our stockholders, could reduce the market price of our common stock or could result in adjustments to exercise prices of outstanding warrants (resulting in these securities becoming exercisable for, as the case may be, a greater number of shares of our common stock), or could obligate us to issue additional shares of common stock to certain of our stockholders.

 

 

We do not intend to pay dividends.

 

We do not anticipate paying cash dividends on our common stock in the foreseeable future. We may not have sufficient funds to legally pay dividends. Even if funds are legally available to pay dividends, we may nevertheless decide in our sole discretion not to pay dividends. The declaration, payment and amount of any future dividends will be made at the discretion of our board of directors, and will depend upon, among other things, the results of our operations, cash flows and financial condition, operating and capital requirements, and other factors our board of directors may consider relevant. There is no assurance that we will pay any dividends in the future, and, if dividends are paid, there is no assurance with respect to the amount of any such dividend.

 

If we fail to maintain effective internal controls over financial reporting, the price of our common stock may be adversely affected.

 

Our internal control over financial reporting may have weaknesses and conditions that could require correction or remediation, the disclosure of which may have an adverse impact on the price of our common stock.  We are required to establish and maintain appropriate internal controls over financial reporting.  Failure to establish those controls, or any failure of those controls once established, could adversely affect our public disclosures regarding our business, prospects, financial condition or results of operations.  In addition, management’s assessment of internal controls over financial reporting may identify weaknesses and conditions that need to be addressed in our internal controls over financial reporting or other matters that may raise concerns for investors.  Any actual or perceived weaknesses and conditions that need to be addressed in our internal control over financial reporting or disclosure of management’s assessment of our internal controls over financial reporting may have an adverse impact on the price of our common stock.

  

ITEM 1B. UNRESOLVED STAFF COMMENTS

 

Not applicable.

 

ITEM 2. PROPERTIES

 

Our executive offices are located at 6804 South Canton Avenue, Suite 150, Tulsa, Oklahoma 74136. The Company signed an Office Lease Agreement (the “Lease Agreement”) on April 24, 2008. On July 2, 2015 the Lease Agreement was amended to extend the expiration date to July 31, 2018 and operating month to month thereafter. The lease is now on a month-to-month basis and cancellable at any time. Additionally, on December 3, 2019, the Company signed a one-year office lease in Ann Arbor, Michigan commencing January 1, 2020 and expiring December 31, 2020. The remaining rent obligation on the Ann Arbor office is $15,120 ($1,260 per month). Rent expense for the Tulsa office operating lease was $23,760 and $23,298 for the years ended December 31, 2019 and 2018, respectively.

 

 

ITEM 3. LEGAL PROCEEDINGS

 

We are not a party to any pending legal proceeding, nor is our property the subject of a pending legal proceeding, that is not in the ordinary course of business or otherwise material to the financial condition of our business. None of our directors, officers or affiliates is involved in a proceeding adverse to our business or has a material interest adverse to our business.

 

ITEM 4. MINE SAFETY DISCLOSURES

 

Not applicable.

 

 

PART II

 

ITEM 5. MARKET FOR COMMON EQUITY AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Our common stock is quoted on the OTC Pink marketplace under the symbol “CRTG”.

 

For the periods indicated, the following table sets forth the high and low bid prices per share of common stock. These prices represent inter-dealer quotations without retail markup, markdown, or commission and may not necessarily represent actual transactions.

 

2019 Fiscal Year 

		High				Low
First Quarter ended March 31, 2019		$	0.09			$	0.03
Second Quarter ended June 30, 2019		$	0.09			$	0.03
Third Quarter ended September 30, 2019		$	0.17			$	0.03
Fourth Quarter ended December 31, 2019		$	0.30			$	0.02

 

2018 Fiscal Year 

		High				Low
First Quarter ended March 31, 2018		$	0.17			$	0.06
Second Quarter ended June 30, 2018		$	0.10			$	0.06
Third Quarter ended September 30, 2018		$	0.10			$	0.03
Fourth Quarter ended December 31, 2018		$	0.09			$	0.03

 

The market price of our common stock, like that of other technology companies, is highly volatile and is subject to fluctuations in response to variations in operating results, announcements of technological innovations or new products, or other events or factors. Our stock price may also be affected by broader market trends unrelated to our performance.

 

Holders

 

As of March 31, 2020, we had approximately 5,400 active holders of our common stock. The number of active holders of record was determined from the records of our transfer agent and does not include beneficial owners of common stock whose shares are held in the names of various security brokers, dealers, and registered clearing agencies. Our transfer agent is Continental Stock Transfer & Trust Company, One State Street Plaza, 30^th Floor, New York, NY 10004.

 

 

Dividend Policy

 

We have not declared any dividends to date. We have no present intention of paying any cash dividends on our common stock in the foreseeable future, as we intend to use earnings, if any, to generate growth. The payment of dividends, if any, in the future, rests within the discretion of our Board of Directors and will depend, among other things, upon our earnings, capital requirements and our financial condition, as well as other relevant factors. There are no restrictions in our Certificate of Incorporation or By-laws that restrict us from declaring dividends.

 

Equity Compensation Plan Information

 

We have the 2018 Equity Incentive Plan, referred to herein as the “Stock Plan.” As of March 31, 2020, 20,716,557 options to purchase our common stock were issued and outstanding under the Stock Plan with a weighted-average price of $0.08.

 

The following table sets forth the information indicated with respect to our compensation plans under which our common stock is authorized for issuance.

 

Number of

Number of securities

securities to be

remaining available

issued upon

for future issuance

exercise of

under equity

outstanding

Weighted average

compensation plans

options,

exercise price of

(excluding securities

warrants and

outstanding options,

reflected in

Plan category

rights

warrants and rights

column (a))

(a)

(b)

(c)

Equity compensation plans not approved by security holders:

2018 Plan

15,000,000

$

0.08

12,235,982

 

Recent Sales of Unregistered Securities

 

The Company issued an aggregate of 522,924 shares of the Company’s common stock on February 15, 2018. The Company had agreed to issue to certain consultants and service providers (collectively, “Recipients”) and the Recipients had agreed to accept shares of common stock in consideration for the satisfaction, in lieu of cash payment, of an aggregate of $71,880 owed by the Company to the Recipients. Among the Recipients were (i) Doug Freitag, the Company’s former Chief Executive Officer, who received 322,154 shares of common stock in satisfaction of $41,880 owed to him for services he provided to the Company; (ii) Concordia Financial Group, the Company’s financial consultant, who received 230,770 shares of common stock in satisfaction of $30,000 owed for services provided to the Company under the terms of the independent consulting agreement (the “Independent Consulting Agreement”). On July 2, 2018, August 6, 2018 and October 1, 2018 the Company issued an aggregate of 430,985 shares of the Company’s common stock to Concordia Financial Group in satisfaction of $22,046 owed for services provided under the Independent Consulting Agreement. On October 24, 2018, Matthews Kappers, an associate of Concordia Financial Group, was issued 63,930 shares of common stock in satisfaction of $2,960 owed to him for consulting services. During 2019, Concordia was issued an aggregate of 1,413,272 shares of the Company’s common stock under the terms of the Independent Consulting Agreement. During 2019, Matthews Kappers was issued 302,907 shares of common stock in satisfaction of $11,337 owed to him for consulting services. On December 27, 2019, the Company issued 123,330,807 shares of Common Stock of the Company upon the conversion of debt held by certain Legacy Holders, which Legacy Holders consists substantially of the Company’s Co-Chairmen, Victor Keen and Simon Calton. The total outstanding Legacy Debt converted was $2,711,359, which consisted of $2,017,435 in outstanding principal and $693,924 in accrued interest.

 

 

ITEM 6. SELECTED FINANCIAL DATA

 

Not applicable.

 

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION

 

The following discussion and analysis should be read together with our consolidated financial statements and the related notes appearing elsewhere in this Report. This discussion contains forward-looking statements reflecting our current expectations that involve risks and uncertainties. See “Forward-Looking Statements” for a discussion of the uncertainties, risks and assumptions associated with these statements. Actual results and the timing of events could differ materially from those discussed in our forward-looking statements as a result of many factors, including those set forth under “Risk Factors” and elsewhere in this Report.

 

Plan of Operation

 

Background: 

 

From June 2, 2015 (inception), our wholly owned subsidiary, Coretec Industries, LLC, aimed to create technology-based solutions (products and services) that address energy-related market needs globally. Leveraging the expertise of its management in forming and managing technology-based startups, fund raising, sales, and marketing. They were advised by Dr. Philip Boudjouk, an expert in silicon (“Si”) chemistry and Doug Freitag, an expert in the application of Si materials and Federal business development.

 

On June 22, 2017, the Group filed an Amended Certificate of Incorporation (the “Amendment”) with the Secretary of State of the State of Oklahoma, to (i) change its name from “3DIcon Corporation” to “The Coretec Group Inc.” and to (ii) effect a 1-for-300 reverse stock split. The Name Change and Reverse Split became effective with the State of Oklahoma on June 28, 2017 and with FINRA on June 29, 2017. 

 

The Group was incorporated on August 11, 1995, under the laws of the State of Oklahoma as First Keating Corporation. The articles of incorporation were amended August 1, 2003 to change the name to 3DIcon Corporation. During 2001, First Keating Corporation began to focus on the development of 360-degree holographic technology. On July 15, 2005, the Group entered into a Sponsored Research Agreement (“SRA”) with the University of Oklahoma (the “University” or “OU”), which expired on January 14, 2007, under which they conducted a research project entitled "Investigation of 3-Dimensional Display Technologies”. On February 23, 2007, they entered into an SRA with the University, which expired on March 31, 2010, under which they conducted a research project entitled "3-Dimensional Display Development". The development to date has resulted in multiple new technologies, two working laboratory prototypes (Lab Proto 1 and Lab Proto 2), and eight provisional patents; five of the eight provisional patents have been combined and converted to five utility patents. Under the SRA, the Group has obtained the exclusive worldwide marketing rights to these 3D display technologies.

 

On September 30, 2016 we closed a transaction contemplated by the Share Exchange Agreement with Coretec, pursuant to which Coretec became a wholly owned subsidiary of the Group. The combination of the two companies provides a significant number of opportunities to increase shareholder value by: 

 

	●	Providing technological support to advance the refinement of CSpace image material;
	●	Adding recognized expertise to the team;
	●	Creating the opportunity for near-term revenue; and
	●	Adding a significant portfolio of Intellectual Property.

 

 

Combined Company Plans

 

Coretec’s Technology. Coretec’s underlying technology is based on the efficient production of a high value liquid silicon precursor, cyclohexasilane. A key advantage of cyclohexasilane (“CHS”) is that it is a liquid at room temperature and does not convert to a gas until heated above 400°F. This compares to materials commonly used for manufacturing silicon-based semiconductors and solar cells (monosilane or trichlorosilane) that have much lower boiling points which leads to higher cost handling and shipping. Another key advantage of CHS is that the production rate of the silicon-forming step can be increased by a factor of six relative to the currently used materials, leading to significant cost savings. The Company anticipates that CHS will first be used as an alternative to monosilane or trichlorosilane when adding silicon to lithium ion batteries or when used in manufacturing silicon-based semiconductors.

 

The Company also sees longer term potential in several emerging markets where there are opportunities in the conversion of CHS into nanoparticles and nanowires for use in such emerging, high-growth markets as:

 

	●	Energy storage
	●	Solid state lighting
	●	Authentication of critical documentation
	●	Printable electronics
	●	Building-integrated solar energy
	●	Drug delivery

  

Enhancement of CSpace. A key challenge in the development of CSpace® is the development of the material to be used for the image chamber. The Company had been exploring a variety of glass alternatives and it has been concluded that limitations remain, primarily in weight and cost.

 

A key virtue of having access to the Coretec IP portfolio of Silicon-based materials is that the Company can use all of the manufacturing infrastructure and knowledge that’s available for optical plastics for the CSpace® image chamber. The benefit to CSpace® is that we can mold the material into a broad range of shapes that is much lighter and much lower in cost than the glass material we worked with before. While this approach is being explored, alternative approaches continue to be considered.

 

Near-Term Revenue Opportunities. Opportunities for near-term revenue continue to be explored in battery and microelectronic markets. Interest in the use of silicon in Li-ion batteries continues to increase driven by the growing demand for electrical vehicles and home energy storage systems for backup power. Discussions are ongoing with suppliers of Li-ion battery anode materials that are seeking next generation materials to further increase performance while improving lifetime, safety and reliability. We believe these suppliers will be well positioned to take advantage of the benefits provided by CHS when combined as a liquid with other powder-based materials. While we believe the use of CHS in Li-ion batteries will provide near term revenue, we also continue to explore revenue opportunities in microelectronics and especially those early adopter markets where advanced microelectronics are being developed in lower volumes and with less price sensitivity. 

 

Recent Developments

 

On December 27, 2019, the Company issued 123,330,807 shares of Common Stock of the Company upon the conversion of debt held by certain Legacy Holders, which Legacy Holders consists substantially of the Company’s Co-Chairmen, Victor Keen and Simon Calton. The total outstanding Legacy Debt converted was $2,711,359, which consisted of $2,017,434 in outstanding principal and $693,925 in accrued interest. The Legacy Debt was converted at a conversion price of $0.022 per share, which Conversion Price was determined by the Company’s Board of Directors at a time during which the price of Common Stock was quoted significantly lower than the price quoted immediately prior to this Current Report.

 

 

On October 4, 2019 the Company entered into a Credit Agreement and related convertible promissory note with Diversified Alpha Fund of Navigator Global Fund Manager Platform SPC, a Grand Cayman entity. After communications between the Company and Lender, and in preparation of the Credit Agreement, the Board agreed to and approved the conversion of the Legacy Debt into shares of the Common Stock at the Conversion Price at any time prior to December 31, 2019. In seeking the capital raise with the Lender, and in order to clean up the Company’s consolidated balance sheet, it was apparent to the Board that maintaining the Legacy Debt on the Company’s books was incompatible with the intent of the capital raise with the Lender and the continued drawdowns anticipated under the Credit Agreement. The Legacy Debt was initially arranged by the Company after a significant, yet unsuccessful, search to secure third party financing. Furthermore, since the Legacy Holders were willing to convert such Legacy Debt into shares of Common Stock, the Company, believing it to be in its best interest and a necessary component to continuing to draw down debt pursuant to the Credit Agreement, agreed with the conversion of such Legacy Debt.

 

The securities above were offered and sold pursuant to an exemption from the registration requirements under Section 4(a)(2) of the Securities Act since, among other things, the transaction did not involve a public offering.

 

 

RESULTS OF OPERATIONS FOR THE YEAR ENDED DECEMBER 31, 2019 COMPARED TO THE YEAR ENDED DECEMBER 31, 2018

 

Revenue

 

We did not have revenues for the years ended December 31, 2019 and 2018.

 

Research and Development Expenses

 

The research and development expenses were $80,229 for the year ended December 31, 2019, as compared to $85,066 for the year ended December 31, 2018. The approximately $5,000 decrease was a result of the approximately $3,000 decrease in patent fees and approximately $2,000 decrease in travel cost in 2019.

 

General and Administrative Expenses

 

Our general and administrative expenses were $1,486,849 for the year ended December 31, 2019, as compared to $751,251 for the year ended December 31, 2018. The approximately $736,000 net increase was a result of options issued to the CEO, CFO and consultants of $745,000, an increase of our CEO compensation of $18,000, an increase in cost for consulting fees of $21,000 from additional time spent on various investigations of possible merger candidates, an increase in our insurance cost of $8,000 and increase in various administrative costs of $3,000. These increases were partially offset by a decrease in marketing cost of $52,000 and a decrease in legal fees of $7,000.

 

Interest Expense

 

Interest expense was $287,307 for the year ended December 31, 2019, as compared to $394,943 for the year ended December 31, 2018. The decrease of approximately $108,000 was a net result of the decrease in the loan discount accretion on our loans and an increase of $18,000 due to the increase of the principal balance due under our loan agreements with Carlton James, Ltd. and Victor F. Keen during the year.

 

Financial Condition, Liquidity and Capital Resources

 

Management remains focused on controlling cash expenses. We recognize our limited cash resources and plan our expenses accordingly. We intend to leverage stock-for-services wherever possible. The operating budget consists of the following expenses:

 

●

Acceleration of research and development through increased research personnel as well as other research agencies.

●

General and administrative expenses: salaries, insurance, investor related expenses, rent, travel, website, etc.

●

Hiring executive officers for technology, operations and finance.

●

Professional fees for accounting and audit; legal services for securities and financing; patent research and protection.

 

We had net cash of $58,149 at December 31, 2019. We had negative working capital of $507,983 at December 31, 2019.

 

 

During the year ended December 31, 2019, we used $612,459 of cash for operating activities, a decrease of $22,702 or 4% compared to the year ended December 31, 2018. The decrease in the use of cash for operating activities was a net result of the increase in the loss from operations of $807,914, the decrease in gain on settlement of accounts payable of $184,789, the decrease in amortization of debt discount of $124,606, the increase in common stock issued for services of 14,801, the increase in the options issued for common stock of $765,631, the increase in common stock issued for interest of $225,664, the increase in the change in prepaid expenses of $50,965 and a decrease in the change in accounts payable of $184,697. 

 

During the year ended December 31, 2019, there was $666,607 of cash provided by financing activities, an increase of $498,075 or 296% compared to the year ended December 31, 2018. The increase was the net result of an increase in proceeds from notes payables of $624,649, offset by the $63,675 payment to retire the remaining balance on the Golden State 4.75% $100,000 convertible debenture, and an increase in the payments on our insurance financing agreement of $14,366.

 

We expect to fund the ongoing operations through the existing financing in place, through raising additional funds as permitted by the terms of DAF Credit Agreement as well as reducing our monthly expenses. Our ability to fund the operations of the Company is highly dependent on the underlying stock price of the Company.

 

Off Balance Sheet Arrangements

 

The Company does not engage in any off-balance sheet arrangements that are reasonably likely to have a current or future effect on our consolidated financial condition, revenues, and results of operations, liquidity or capital expenditures.

 

Significant Accounting Policies

 

Fair Value of Financial Instruments

 

The following methods and assumptions were used to estimate the fair value of each class of financial instrument held by the Company:

 

Current assets and current liabilities - The carrying value approximates fair value due to the short maturity of these items.

 

Notes payable - The fair value of the Company's notes payable has been estimated by the Company based upon the liability's characteristics, including interest rates, imbedded instruments and conversion discounts. The carrying value approximates fair value after taking into consideration the liability’s characteristics.

 

Use of Estimates

 

The preparation of consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, expenses and the disclosure of contingent assets and liabilities. Actual results could differ from the estimates and assumptions used.

 

Intangible Assets

 

Intangible assets consist primarily of acquired patents. The Company acquired $1,400,000 of intangible assets in conjunction with the 2016 business combination. Intangible assets with finite lives are amortized on a straight-line basis over their useful lives.

 

Research and Development

 

Research and development costs are expensed as incurred. Research and development costs amounted to approximately $80,000 and $85,000 for the years ended December 31, 2019 and 2018, respectively.

 

 

Recently Issued Accounting Pronouncements

 

See the Recent Accounting Pronouncements section of Note 1 to our Consolidated Financial Statements included in Part II, Item 8 of this report for further details of recent accounting pronouncements.

 

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

Not applicable.

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

All financial information required by this Item is attached hereto at the end of this report beginning on page F-1 and is hereby incorporated by reference.

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

ITEM 9A. CONTROLS AND PROCEDURES

 

Management's Report on Internal Control over Financial Reporting

 

Limitations on Effectiveness of Controls. In designing and evaluating our disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives. In addition, the design of disclosure controls and procedures must reflect the fact that there are resource constraints and that management is required to apply its judgment in evaluating the benefits of possible controls and procedures relative to their costs.

 

Evaluation of Disclosure Controls and Procedures. Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2019. The term “disclosure controls and procedures,” as defined in Rule 13a-15 under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to management, including our principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure.

 

Based on our evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2019, our disclosure controls and procedures were not effective at a reasonable assurance level as we do not have sufficient resources in our accounting function, which restricts the Company’s ability to gather, analyze and properly review information related to financial reporting in a timely manner. In addition, due to our size and nature, segregation of all conflicting duties may not always be possible and may not be economically feasible. However, to the extent possible, management will engage financial consultants and perform additional analysis and other procedures to help address this material weakness. Until remediation actions are fully implemented and the operational effectiveness of related internal controls are validated through testing, the material weaknesses described above will continue to exist. 

 

Notwithstanding the assessment that our internal control over financial reporting was not effective and that there is a material weakness as identified herein, we believe that our consolidated financial statements contained in this Annual Report fairly present our consolidated financial position, results of operations and cash flows for the periods covered thereby in all material respects.

 

Changes in Internal Control Over Financial Reporting. There has been no change in our internal control over financial reporting identified in connection with the evaluation required by Rule 13a-15(d) of the Exchange Act that occurred during the quarter ended December 31, 2019 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting. 

 

 

ITEM 9B. OTHER INFORMATION

 

None.

 

 

PART III

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS, PROMOTERS AND CONTROL PERSONS; COMPLIANCE WITH SECTION 16(A) OF THE EXCHANGE ACT

 

EXECUTIVE OFFICERS, DIRECTORS AND KEY EMPLOYEES

 

The following table sets forth the names and ages of the members of our Board of Directors and our executive officers and the positions held by each. There are no family relationships among any of our Directors and Executive Officers.

 

Name		Age		Position
Victor Keen		78		Director, Co-Chairman
Simon Calton		39		Director, Co-Chairman
Michael A. Kraft		57		Chief Executive Officer
Ronald Robinson		74		Chief Financial Officer
Ron Dombrowski		55		Director

 

 

Victor Keen – Director, Co-Chairman

 

Mr. Keen is a significant shareholder in the Company and has been a member of the Board since November 2007. Mr. Keen is a graduate of Harvard Law School and Trinity College. Until November 2010 he was the chair of the Tax Practice Group at Duane Morris LLP, an international law firm and one of the 100 largest law firms in the world. In November 2010, Mr. Keen became Of Counsel to the firm and has since devoted the majority of his time to charitable board memberships, as well as real estate investments and other ventures. For more than ten years Mr. Keen served on the board of Research Frontiers (NASDAQ: REFR), a developer of “Smart Glass” through licensees around the world. Mr. Keen has been an active investor in a number of private companies, both start up and later stage, including: Lending Tree, acquired by IAC Interactive Corp. (NASDAQ: IACI); Circle Lending, Inc., now part of Richard Branson’s Virgin Group; and Rollover Systems, Inc., a privately held company involved in the matching of individual IRA/pension accounts with appropriate managers. Mr. Keen is a co-founder and co-owner of Bantam Pharmaceutical LLC, a privately held biotechnology company founded in 2015 focusing on the discovery and development of innovative cancer therapies.

 

Simon Calton – Director, Co-Chairman

 

Simon Calton has over 13 years of experience in financing and company structuring and utilizes his experience to find opportunities in different sectors. Since 2008, Mr. Calton has structured a number of Alternative Investment Products geared around Construction and Development in the United States and United Kingdom. In 2012 he co-founded Carlton James Ltd, which specializes in funding specific projects and developments throughout the United States. In 2007 Mr. Calton co-founded Carlton James Private and Commercial, a project investment, pension administration service and global financing firm which helps to fund projects around the globe.

 

We believe Mr. Calton is qualified to serve on our board of directors because of his extensive business and management experience.

 

 

Michael A. Kraft – Chief Executive Officer

 

In addition to his role as CEO, Michael is a Mentor-in-Residence at the University of Michigan Technology Transfer Office and he is Founder/Managing Director of MKT Partners, LLC, an Executive Advisory and Interim C-Level firm focused on business development for materials science, performance materials and technology systems. Michael has served as an Executive in Residence for a large European PE Firm, CEO of Covaron Advanced Materials, Executive Officer and Vice President of Ceradyne Inc. (previously NASDAQ: CRDN), and GM at both Kulicke & Soffa and General Electric. As CEO/GM he has managed P&L’s from start-up to $300M and as a member of two executive teams grew shareholder value to >$1.4B by identifying critical business drivers, growing revenues and market share organically, building strategic partnerships, and completing accretive acquisitions. Michael completed the General Electric Crotonville Management Program with a Master of Management and Business from Penn State University. He holds a Bachelor of Science in Electrical Engineering & Systems Science from Michigan State University and recently extended his executive education by completing courses in Strategic Planning and Technology Marketing at CalTech.

 

Ron Dombrowski – Director

 

Since August 2015, Mr. Dombrowski served as a member of Coretec’s Board of Directors. Between April 2015 and November 2015, he was Director of Sales and Marketing at Lifting Solutions Automation Inc. From August 2010 to April 2015 Mr. Dombrowski served as the Vice President of Sales and Marketing at Limited Solutions Automation Inc. He is a graduate of the Southern Illinois University with degrees in Electrical Engineering and Management. Mr. Dombrowski has also attended executive education programs at University of Phoenix and Marquette University. Mr. Dombrowski has over 25 years of global sales and operations experience, growing and scaling both startups and Fortune 500 technology companies.

 

We believe that Mr. Dombrowski is qualified to serve on our board of directors because of his background in sales and operations experience. 

  

Ronald Robinson - Chief Financial Officer

 

Ronald Robinson was appointed Chief Financial Officer on January 28, 2013. He was a partner in three local CPA firms spanning forty years, the latest of which was Sutton Robinson Freeman & Co., PC, from 1999 through 2010, of which he was the managing partner and performed SEC/PCOAB audits for several clients, including the Company. He has been an SEC compliance and accounting consultant for the Company since 2010. Mr. Robinson is a graduate of East Central University, Ada, Oklahoma with a BS in Accounting.

 

Audit Committee

 

On February 25, 2008, the Board of Directors created an Audit Committee comprising of Mr. Victor Keen. We intend to continue to evaluate the composition of our Audit Committee.

 

Compensation Committee

 

On February 25, 2008, the Board of Directors created a Compensation Committee comprising of Mr. Victor Keen. We intend to continue to evaluate the composition of our Compensation Committee.

 

Nomination and Corporate Governance Committee

 

On February 25, 2008, the Board of Directors created Nominations and Corporate Governance Committee comprising of Mr. Victor Keen. We intend to continue to evaluate the composition of our Nominations and Corporate Governance Committee.

 

Director or Officer Involvement in Certain Legal Proceedings

 

Our directors and executive officers were not involved in any legal proceedings as described in Item 401(f) of Regulation S-K in the past ten years.

 

 

Board Leadership Structure and Role in Risk Oversight

 

Although we have not adopted a formal policy on whether the Chairman and Chief Executive Officer positions should be separate or combined, in the past we determined that it was in the best interests of the Company and its shareholders to combine these roles.

 

Our Board of Directors receives and reviews periodic reports from management, auditors, legal counsel, and others, as considered appropriate regarding our Company's assessment of risks. Our Board of Directors focuses on the most significant risks facing our Company and our Company's general risk management strategy and ensures that risks undertaken by us are consistent with the Board's appetite for risk. While the Board oversees our Company's risk management, management is responsible for day-to-day risk management processes. We believe this division of responsibilities is the most effective approach for addressing the risks facing our Company and that our board leadership structure and role in risk oversight is effective. 

 

Involvement in Certain Legal Proceedings

 

To our knowledge, our directors and executive officers have not been involved in any of the following events during the past ten years:

 

	1.	any bankruptcy petition filed by or against such person or any business of which such person was a general partner or executive officer either at the time of the bankruptcy or within two years prior to that time;
	2.	any conviction in a criminal proceeding or being subject to a pending criminal proceeding (excluding traffic violations and other minor offenses);
	3.	being subject to any order, judgment, or decree, not subsequently reversed, suspended or vacated, of any court of competent jurisdiction, permanently or temporarily enjoining him from or otherwise limiting his involvement in any type of business, securities or banking activities or to be associated with any person practicing in banking or securities activities;
	4.	being found by a court of competent jurisdiction in a civil action, the SEC or the Commodity Futures Trading Commission to have violated a Federal or state securities or commodities law, and the judgment has not been reversed, suspended, or vacated;
	5.	being subject of, or a party to, any Federal or state judicial or administrative order, judgment decree, or finding, not subsequently reversed, suspended or vacated, relating to an alleged violation of any Federal or state securities or commodities law or regulation, any law or regulation respecting financial institutions or insurance companies, or any law or regulation prohibiting mail or wire fraud or fraud in connection with any business entity; or
	6.	being subject of or party to any sanction or order, not subsequently reversed, suspended, or vacated, of any self-regulatory organization, any registered entity or any equivalent exchange, association, entity or organization that has disciplinary authority over its members or persons associated with a member.

 

Code of Ethics

 

We have not adopted a Code of Ethics and Business Conduct for Officers, Directors and Employees that applies to all of our officers, directors and employees.

 

 

Employment Agreements

 

The Company entered into a consulting agreement dated March 20, 2017 with Mr. Michael A. Kraft, who became the Company’s CEO. Under the terms of the agreement the Company agreed to compensate Mr. Kraft, $1,500 per day for his commitment to allocate seven days a month (subsequently amended to ten day a month) to the Company and a $25,000 bonus payable in the Company’s restricted stock upon occurrence of certain events. During the years ended December 31, 2019 and 2018, the Company recognized $144,000 and $126,000 of expense respectively, under the terms of the agreement. Additionally, Mr. Kraft was issued ten million options during August 2019 for (1) as compensation for the $25,000 bonus in the consulting agreement, (2) approximately $91,000 as payment for unpaid consulting fees and, (3) approximately $294,000 as additional compensation for his consulting services. As of December 31, 2019, Mr. Kraft is owed $95,966 in unpaid consulting fees and out of pocket expenses, which is included in accounts payable and accrued expenses.

 

On November 13, 2017, the Company hired Ramez Elgammal, as Vice President of Technology. Mr. Elgammal is leading new business development and sales initiatives for the Company’s proprietary liquid silicon precursor, CHS. The one-year consulting agreement was effective as of November 15, 2017 and continued in full force and effect through November 14, 2018 whereupon the agreement was renewed on a month to month term. The Company paid Mr. Elgammal a fee of $125 per hour. The Company paid Mr. Elgammal a fee of $22,188 and $58,063 for the years ended December 31, 2019 and 2018 respectively. Additionally, Mr. Ramez was issued 1,000,000 options to purchase common stock of the company in August 2019.

 

Director Compensation

 

Our directors have not received monetary compensation for their service on the Board of Directors. Directors may receive compensation for their services and reimbursement for their expenses as shall be determined from time to time by resolution of the Board.

 

Except as below, none of the following parties has, since our date of incorporation, had any material interest, direct or indirect, in any transaction with us or in any presently proposed transaction that has or will materially affect us:

 

	●	Any of our directors or officers;
	●	Any person proposed as a nominee for election as a director;
	●	Any person who beneficially owns, directly or indirectly, shares carrying more than 10% of the voting rights attached to our outstanding shares of common stock;
	●	Any member of the immediate family of any of the foregoing persons.

         

On December 27, 2019, The Company issued 123,330,807 shares of Common Stock of the Company upon the conversion of debt held by the Legacy Holders as discussed under Part I, Recent Developments.

 

 

Risk Management

 

The Company does not believe risks arising from its compensation policies and practices for its employees are reasonably likely to have a material adverse effect on the Company.

 

Director Independence

 

Because the Company’s Common Stock is not currently listed on a national securities exchange, the Company has used the definition of “independence” of The NASDAQ Stock Market to make this determination. NASDAQ Listing Rule 5605(a)(2) provides that an “independent director” is a person other than an officer or employee of the company or any other individual having a relationship which, in the opinion of the company’s board of directors, would interfere with the exercise of independent judgment in carrying out the responsibilities of a director. The NASDAQ listing rules provide that a director cannot be considered independent if:

 

●

the director is, or at any time during the past three years was, an employee of the company;

 

●

the director or a family member of the director accepted any compensation from the company in excess of $120,000 during any period of 12 consecutive months within the three years preceding the independence determination (subject to certain exclusions, including, among other things, compensation for board or board committee service);

 

●

a family member of the director is, or at any time during the past three years was, an executive officer of the company;

 

●

the director or a family member of the director is a partner in, controlling stockholder of, or an executive officer of an entity to which the company made, or from which the company received, payments in the current or any of the past three fiscal years that exceed 5% of the recipient’s consolidated gross revenue for that year or $200,000, whichever is greater (subject to certain exclusions);

 

●

the director or a family member of the director is employed as an executive officer of an entity where, at any time during the past three years, any of the executive officers of the company served on the compensation committee of such other entity; or

 

●

the director or a family member of the director is a current partner of the company’s outside auditor, or at any time during the past three years was a partner or employee of the company’s outside auditor, and who worked on the company’s audit.

 

Based on this review of the Company’s Board of Directors, none of the members are considered to be independent under the listing standards of the Rules of NASDAQ set forth in the NASDAQ Manual. 

 

 

  ITEM 11. EXECUTIVE COMPENSATION

 

The following table sets forth all compensation earned in respect of our Co-Chairman, Chief Executive Officers and our Chief Financial Officer for our last three completed fiscal years.

 

SUMMARY COMPENSATION TABLE

 

The following information is furnished for the years ended December 31, 2019, 2018 and 2017 for our Co-Chairman, Chief Executive Officers and our Chief Financial Officer.

  

Name and Principal Position		Year		Salary ($)				Bonus ($)				Stock Awards ($)				Option Awards ($)				Non-Equity Incentive Plan Compensation ($)				Change in Pension Value and Non- Qualified Deferred Compensation Earnings ($)				All Other Compensation ($)				Total ($)
Simon Calton Co-Chairman		2019		$	-							$	-							$	-			$	-			$	-			$	-
		2018		$	-							$	-							$	-			$	-			$	-			$	-
		2017		$	-							$	-							$	-			$	-			$	-			$	-
Victor Keen		2019		$	-			$	-			$	-			$	-			$	-			$	-			$	-			$	-
Co-Chairman		2018		$	-			$	-			$	-			$	-			$	-			$	-			$	-			$	-
		2017		$	-			$	-			$	-			$	-			$	-			$	-			$	-			$	-
Doug Freitag		2019		$	-			$	-							$	-			$	-			$	-			$	-			$	-
Former CEO *		2018		$	-			$	-			$	-			$	-			$	-			$	-			$	-			$	-
		2017		$	58,055			$	-			$	-			$	-			$	-			$	-			$	-			$	58,055
Michael A. Kraft		2019		$	144,000			$	25,000			$	-			$	294,132			$	-			$	-			$	-			$	463,132
CEO **		2018		$	126,000			$	-			$	-			$	-			$	-			$	-			$	-			$	126,000
		2017		$	102,000			$	-			$	25,000			$	50,000			$	-			$	-			$	-			$	177,500
Ronald Robinson		2019		$	72,000			$	-			$	-			$	20,500			$	-			$	-			$	-			$	92,500
CFO		2018		$	72,000			$	-			$	-			$	-			$	-			$	-			$	-			$	72,000
		2017		$	72,000			$	-			$	-			$	-			$	-			$	-			$	-			$	72,000

 

*	Doug Freitag was the Company’s Chief Executive Officer from July 2016 to March 2017.

 

**	Michael A. Kraft was appointed CEO in March 2017.

 

OUTSTANDING EQUITY AWARDS AT FISCAL YEAR END 

 

The following table sets forth with respect to grants of options to purchase our common stock to the executive officers as of December 31, 2019:

 

Name		Number of Securities Underlying Unexercised Options # Exercisable				Number of Securities Underlying Unexercised Options # Un-exercisable				Equity Incentive Plan Awards: Number of Securities Underlying Unexercised Unearned Options #				Option Exercise Price $					Option Expiration Date					Number of Shares or Units of Stock That Have Not Vested #				Market Value of Shares or Units of Stock That have not vested $				Equity Incentive Plan Awards: Number of Unearned Shares Units or Other Rights That Have Not Vested #				Equity Incentive Plan Awards Market or Payout Value of Unearned Shares Units or Other Rights That have not Vested $
Victor Keen, former CEO			3,530				-				-			$53	to	$420			2020	-	2022				-				-				-				-
Michael A. Kraft, CEO			10,208,160				-				-			$.04	to	$0.24			2024	-	2027				-				-				-				-

 

 

Director Compensation 2019

 

Name

Fees Earned or Paid in Cash ($)

Stock Awards ($)

Option Awards ($)

Non-Equity Incentive Plan Compensation ($)

Change in Pension Value and Nonqualified Deferred Compensation Earnings ($)

All Other Compensation ($)

Total ($)

Victor Keen

$

-

-

-

-

-

-

$

-

Simon Calton

$

-

-

-

-

-

-

$

-

Ron Dombrowski

$

-

-

-

-

-

-

$

-

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT 

 

The following table provides information about shares of common stock beneficially owned as of March 31, 2020 by:

 

	●	each director;
	●	each officer named in the summary compensation table;
	●	each person owning of record or known by us, based on information provided to us by the persons named below, to own beneficially at least 5% of our common stock; and
	●	all directors and executive officers as a group.

 

Name of Beneficial Owner		Common Stock Beneficial Ownership(1)				Percent of Class(2)				Series A Preferred Beneficial Ownership				Percent of Class(9)
Named Executive Officers and Directors:
Victor Keen (3)			100,739,007				49.71	%			265,000				76.81	%
Michael A. Kraft (4)			10,208,160				5.04	%			-				-
Ronald Robinson (5)			1,084,327				0.54	%			-				-
Simon Calton (6)			34,038,733				16.80	%			-				-
Ronald Dombrowski (7)			3,644,920				1.80	%			-				-
All directors and executive officers as a group (5 person)			149,711,618				73.88	%			265,000				76.81	%
Other 5% Stockholders:
Carlton James Ltd (8)			64,982,991				32.07	%			-				-

 

 

(1)

Number of Shares Beneficially Owned include the conversion of all Series B Preferred shares into common stock.

 

(2)

Percentage ownership is determined based on shares owned together with securities exercisable or convertible into shares of common stock within 60 days of the date of this report, for each stockholder. Beneficial ownership is determined in accordance with the rules of the SEC and generally includes voting or investment power with respect to securities. Furthermore, the percentages set forth in this column are based on the 202,650,642 issued and outstanding shares of common stock on March 31, 2020.

 

(3)

Represents 94,538,746 shares owned by Mr. Keen and (i) 6,108,398 shares prorated ownership of shares held by Carlton James Ltd., (ii) 3,530 shares issuable upon exercise of the options held by Mr. Keen, and (iii) 88,333 shares issuable upon the conversion of 265,000 shares of Series A preferred stock held by Mr. Keen. Victor Keen is a Co-Chairman of the Company’s Board of Directors.

 

(4)

In connection with the Company’s appointment of Mr. Kraft as CEO, the Company agreed to issue a $25,000 bonus in restricted stock upon the occurrence of certain events.  In addition, the Company agreed, upon the occurrence of such events, to issue an option to purchase up to $50,000 (208,160 shares) of the Company’s common stock at an exercise price equal to the market price as of the date the milestones are met.  Additionally, Mr. Kraft was issued 10,000,000 options in 2019. Accordingly, Mr. Kraft’s beneficial ownership reflects 10,208,160 shares beneficially owned.

 

(5)

Represents 739 shares owned by Mr. Robinson, 3 shares in Mr. Robinson’s IRA, and 583,585 shares issued upon conversion of the shares of Series B Preferred previously held and 500,000 options held by Mr. Robinson. Ronald Robinson is our Chief Financial Officer.

 

(6)

Represents 5,771,131 shares owned by Mr. Calton and Mr. Calton’s 28,267,602 shares prorated ownership of shares held by Carlton James Ltd. Simon Calton is the Co-Chairman of the Company’s Board of Directors.

 

(7)

Represents 3,644,920 owned by Mr. Dombrowski. Ronald Dombrowski is a Director on the Company’s Board of Directors.

 

(8)

Represents 7,593,591 shares owned by Carlton James Ltd. Shares held by Carlton James Ltd., are controlled by all of its members.

 

(9)

Calculated on the basis of 345,000 issued and outstanding shares of Series A Convertible Preferred Stock as of March 31, 2020.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

Related Party Transactions

 

The Company entered into a consulting agreement dated March 20, 2017 with Mr. Michael A. Kraft, who became the Company’s CEO. Under the terms of the agreement the Company agreed to compensate Mr. Kraft, $1,500 per day for his commitment to allocate seven days a month (subsequently amended to ten day a month) to the Company and a $25,000 bonus payable in the Company’s restricted stock upon occurrence of certain events. During the years ended December 31, 2019 and 2018, the Company recognized $144,000 and $126,000 of expense respectively, under the terms of the agreement. Additionally, Mr. Kraft was issued ten million options during August 2019 for (1) as compensation for the $25,000 bonus in the consulting agreement, (2) approximately $91,000 as payment for unpaid consulting fees and, (3) approximately $294,000 as additional compensation for his consulting services. As of December 31, 2019, Mr. Kraft is owed $95,966 in unpaid consulting fees and out of pocket expenses, which is included in accounts payable and accrued expenses.

 

 

At December 31, 2018 the Company had an aggregate balance of $971,500 of advances due to Mr. Victor Keen, Co-Chairman of the Board of Directors. During the year ended December 31, 2019 Mr. Keen advanced the Company an additional $135,000, such that an aggregate amount of $1,106,500 was due to Mr. Keen under the terms of certain promissory notes and convertible debentures (“the Notes”) which were included in notes payable – related party (see Note 4 of the consolidated financial statements). The Notes along with accrued interest of $342,292, were converted to common stock on December 27, 2019. Interest expense related to the Notes was $112,969 and $84,991 for the year ended December 31, 2019 and 2018 respectively.

 

At December 31, 2018, the Company had an aggregate balance of $775,934 of advances due to CJL, a company owned by Mr. Simon Calton, a director of the Company.  During the years ended December 31, 2019, CJL, advanced an additional $135,000 such that as of November 30, 2019, an aggregate amount of $910,934 was due to CJL under the terms of two loans (“Loans”), which were included in notes payable-related parties (see Note 4 of the notes to financial statements). The Loans along with accrued interest of $351,633 were converted to common stock on December 27, 2019.  Interest expense related to the Loans was $112,695 and $99,615 for the years ended December 31, 2019 and 2018 respectively.

 

On October 4, 2019, the Company entered into a Credit Agreement and related Promissory Note with DAF the Lender. DAF is managed by Carlton James, Ltd, a UK based company of which Simon Calton is the Chief Executive Officer. Mr Calton is CO-Chairman of Coretec.

 

Director Independence

 

As discussed above, none of the members are considered to be independent under the listing standards of the Rules of NASDAQ set forth in the NASDAQ Manual

 

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

 

Audit Fees

 

The aggregate fees billed by our principal accountants for the audit of our annual financial statements, review of financial statements included in the quarterly reports and other fees that are normally provided by the accountant in connection with statutory and regulatory filings or engagements for the fiscal years ended December 31, 2019 and 2018 were approximately $70,000 and $69,000, respectively.

 

Audit-Related Fees

 

The aggregate fees billed by our principal accountant for assurance and advisory services that were related to the performance of the audit or review of our financial statements for the fiscal years ended December 31, 2019 and 2018 were $0 and $0, respectively.

 

Tax Fees

 

The aggregate fees billed for professional services rendered by our principal accountant for tax compliance, tax advice and tax planning for the fiscal years ended December 31, 2019 and 2018 were $0 and $0, respectively.

 

All Other Fees

 

The aggregate fees billed for products and services provided by our principal accountant for the fiscal years ended December 31, 2019 and 2018 were $0 and $0, respectively.

 

 

Policy on Audit Committee Pre-Approval of Audit and Permissible Non-Audit Services of Independent Auditors

 

The Audit Committee's policy is to pre-approve all audit and permissible non-audit services provided by the independent auditors. These services may include audit services, audit-related services, tax services and other services. Pre-approval is generally provided for up to one year and any pre-approval is detailed as to the particular service or category of services and is generally subject to a specific budget. The independent auditors and management are required to periodically report to our Board of Directors regarding the extent of services provided by the independent auditors in accordance with this pre-approval, and the fees for the services performed to date. The Board of Directors may also pre-approve particular services on a case-by-case basis.

 

 

PART IV

 

ITEM 15. EXHIBITS

 

3.1	Certificate of Incorporation (1)
3.2	Bylaws (1)
3.3	Amended Certificate of Incorporation (1)
3.4	Amended Certificate of Incorporation (1)
3.5	Amended Certificate of Incorporation (1)
3.6	Amended Certificate of Incorporation (3)
3.7	Amended Certificate of Incorporation (6)
3.8	Amendment to the Bylaws as of April 4, 2013 (14)
3.9	Certificate of Designation of Preferences, Rights and Limitation of Series A Convertible Preferred Stock (20)
3.10	Certificate of Designation of Preferences, Rights and Limitation of Series B Convertible Preferred Stock (23)
3.11	Certificate of Amendment to the Certificate of Designation of the Series B Convertible Preferred Stock (25)
4.1	Convertible Promissory Note dated August 1, 2012 issued to JMJ Financial (7)
4.2	Form of Convertible Bridge Note (8)
4.3	Form of Convertible Debenture dated June 25, 2013 (18)
4.4	Senior Convertible Note dated October 1, 2013 (19)
4.5	Convertible Promissory Note dated March 5, 2015 (22)
4.6	Convertible Note dated March 4, 2015 (22)
10.1	Securities Purchase Agreement (1)
10.2	Amendment No. 1 to Securities Purchase Agreement and Debenture (1)
10.3	Registration Rights Agreement dated November 3, 2006(1)

 

 

10.4	$100,000 convertible debenture (1)
10.5	$1.25 million convertible debenture dated November 3, 2006 (1)
10.6	Common Stock Purchase Warrant (1)

 

10.7	Sponsored Research Agreement by and between 3DIcon Corporation and the Board of Regents of the University of Oklahoma (1)
10.8	Sponsored Research Agreement Modification No. 1 by and between 3DIcon Corporation and the Board of Regents of the University of Oklahoma (1)

 

10.9	Sponsored Research Agreement Modification No. 2 by and between 3DIcon Corporation and the Board of Regents of the University of Oklahoma (1)
10.10	Amendment No. 2 to Securities Purchase Agreement, Debentures, and Registration Rights Agreement (2)

  

10.11

Securities Purchase Agreement dated June 11, 2007 (2)

 

10.12	$700,000 Convertible Debenture (2)
10.13	$1.25 million convertible debenture dated November 21, 2007 (4)
10.14	Registration Rights Agreement dated November 21, 2007 (4)
10.15	Agreement to Convert Debt to Stock dated November 30, 2010 (5)
10.16	Agreement for At-Will Employment with Assignment of Inventions, dated June 13, 2011 (9)
10.17	Agreement for At-Will Employment with Assignment of Inventions, dated March 19, 2012 (10)
10.18	Registration Rights Agreement dated August 1, 2012 (11)
10.19	Form of Securities Purchase Agreement (8)
10.20	Amendment Agreement dated December 21, 2012 (12)
10.21	Form Amendment Agreement dated January 26, 2013 (13)
10.22	Third Amendment to Securities Purchase Agreement and Convertible Note, dated July 22, 2013 (15)
10.23	Settlement Agreement, dated July 17, 2013 (16)
10.24	Order Granting Approval of Settlement Agreement, dated July 26, 2013 (16)
10.25	Second Amendment to Securities Purchase Agreement and Convertible Note, dated July 30, 2013 (17)
10.26	Securities Purchase Agreement, dated October 1, 2013 (19)
10.27	Common Stock Purchase Warrant, dated October 1, 2013 (19)
10.28	Form of Common Stock Purchase Warrant (20)
10.29	Form of Securities Purchase Agreement (20)
10.30	Mutual Release, dated January 17, 2014 (21)

 

 

10.31	Stipulation of Dismissal with Prejudice, dated January 22, 2014 (21)
10.32	Securities Purchase Agreements dated December 11, 2015 (23)

 

10.33	Share Exchange Agreement dated May 31, 2016 (24)
10.34	Supply Agreement date December 13, 2016 (26)
10.35	Option Agreement dated November 15, 2017 (27)
10.36	Settlement Agreement and General Release dated June 29, 2018 (28)
10.37	Credit Agreement dated as of October 4, 2019 (29)
10.38	Promissory Note dated as of October 4, 2019 (29)
10.39	Warrant dated as of October 4, 2019 (29)
21.1	Subsidiaries (30)
31.1*	Certification by Chief Executive Officer, required by Rule 13a-14(a) or Rule 15d-14(a) of the Exchange Act

 

31.2*	Certification by Chief Financial Officer, required by Rule 13a-14(a) or Rule 15d-14(a) of the Exchange Act
32.1*	Certification by Chief Executive Officer, required by Rule 13a-14(b) or Rule 15d-14(b) of the Exchange Act and Section 1350 of Chapter 63 of Title 18 of the United States Code
32.2*	Certification by Chief Financial Officer, required by Rule 13a-14(b) or Rule 15d-14(b) of the Exchange Act and Section 1350 of Chapter 63 of Title 18 of the United States Code

 

101.INS	XBRL Instance
101.SCH	XBRL Taxonomy Extension Schema
101.CAL	XBRL Taxonomy Extension Calculation

  

101.DEF	XBRL Taxonomy Extension Definition
101.LAB	XBRL Taxonomy Extension Labels
101.PRE	XBRL Taxonomy Extension Presentation

 

* Filed herewith

 

(1)	Incorporated by reference to Form SB-2 as filed on December 15, 2006 (File No. 333-139420) and subsequently withdrawn on February 5, 2007
(2)	Incorporated by reference to Form SB-2 as filed on June 14, 2007 (File No. 333-143761)
(3)	Incorporated by reference to Current Report on Form 8-K as filed on December 23, 2010 (File No. 333-143761)
(4)	Incorporated by reference to Current Report on Form 8-K as filed on November 26, 2007 (File No. 333-143761)
(5)	Incorporated by reference to Current Report on Form 8-K as filed on December 7, 2010 (File No. 333-143761)
(6)	Incorporated by reference to Current Report on Form 8-K as filed on May 2, 2012 (File No. 333-143761)

 

 

(7)	Incorporated by reference to Current Report on Form 8-K as filed on August 7, 2012 (File No. 000-54697)
(8)	Incorporated by reference to Current Report on Form 8-K as filed on August 31, 2012 (File No. 000-54697)
(9)	Incorporated by reference to Current Report on Form 8-K as filed on June 14, 2011 (File No. 333-143761)

 

(10)	Incorporated by reference to Current Report on Form 8-K as filed on March 20, 2012 (File No. 333-143761)
(11)	Incorporated by reference to Current Report on Form 8-K as filed on August 7, 2012 (File No. 000-54697)
(12)	Incorporated by reference to Current Report on Form 8-K as filed on December 31, 2012 (File No. 000-54697)
(13)	Incorporated by reference to Current Report on Form 8-K as filed on January 31, 2013 (File No. 000-54697)
(14)	Incorporated by reference to Current Report on Form 8-K as filed on April 5, 2013 (File No. 000-54697)
(15)	Incorporated by reference to Current Report on Form 8-K as filed on July 26, 2013 (File No. 000-54697)
(16)	Incorporated by reference to Current Report on Form 8-K as filed on July 31, 2013 (File No. 000-54697)
(17)	Incorporated by reference to Current Report on Form 8-K as filed on August 5, 2013 (File No. 000-54697)

 

(18)	Incorporated by reference to Quarterly Report on Form 10-Q as filed on August 14, 2013 (File No. 000-54697)

 

(19)	Incorporated by reference to Current Report on Form 8-K as filed on October 7, 2013 (File No. 000-54697)
(20)	Incorporated by reference to Current Report on Form 8-K as filed on December 13, 2013 (File No. 000-54697)
(21)	Incorporated by reference to Current Report on Form 8-K as filed on January 28, 2014 (File No. 000-54697)
(22)	Incorporated by reference to Quarterly Report on Form 10-Q as filed on May 15, 2015 (File No. 000-54697)
(23)	Incorporated by reference to Current Report on Form 8-K as filed on March 24, 2016 (File No. 000-54697)

 

(24)	Incorporated by reference to Current Report on Form 8-K as filed on June 1, 2016 (File No. 000-54697)
(25)	Incorporated by reference to Current Report on Form 8-K as filed on October 6, 2016 (File No. 000-54697)
(26)	Incorporated by reference to Current Report on Form 8-K as filed on December 19, 2016 (File No. 000-54697)
(27)	Incorporated by reference to Current Report on Form 8-K as filed on December 6, 2017 (File No. 000-54697)

 

(28)	Incorporated by reference to Current Report on Form 8-K as filed on July 2, 2018 (File No. 000-54697)
(29)	Incorporated by reference to Current Report on Form 8-K as filed on October 15, 2019 (File No. 000-54697)
(30)	Incorporated by reference to Annual Report on Form 10-K as filed on April 2, 2018 (File No. 000-54697)

 

ITEM 16. FORM 10-K SUMMARY.

 

Not applicable

 

 

SIGNATURES

 

In accordance with Section 13 or 15(d) of the Exchange Act, the registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

	THE CORETEC GROUP INC.
Date: April 2, 2020	/s/ Michael A. Kraft
	Name:	Michael A. Kraft
	Title:	Chief Executive Officer
		(Principal Executive Officer)
	/s/ Ronald W. Robinson
	Name:	Ronald W. Robinson
	Title:	Chief Financial Officer
		(Principal Financial Officer)

 

In accordance with the Exchange Act, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

SIGNATURE			TITLE		DATE
By:	/s/ Victor F. Keen		Director		April 2, 2020
	Victor F. Keen
By:	/s/ Simon Calton		Director		April 2, 2020
	Simon Calton
By:	/s/ Ronald Dombrowski		Director		April 2, 2020
	Ronald Dombrowski

 

  

THE CORETEC GROUP INC.

December 31, 2019 and 2018

 

CONTENTS

 

Report of Independent Registered Public Accounting Firm	F-1
Consolidated Balance Sheets as of December 31, 2019 and 2018	F-2
Consolidated Statements of Operations for the years ended December 31, 2019 and 2018	F-3
Consolidated Statements of Changes in Stockholders' Equity (Deficiency) for years ended December 31, 2019 and 2018	F-4
Consolidated Statements of Cash Flows for the years ended December 31, 2019 and 2018	F-5
Notes to Consolidated Financial Statements	F-6

 

 

Report of Independent Registered Public Accounting Firm

 

 

To the Stockholders and the Board of Directors of The Coretec Group Inc.

 

Opinion on the Financial Statements

 

We have audited the accompanying consolidated balance sheets of The Coretec Group Inc. and its subsidiary (the Company) as of December 31, 2019 and 2018, the related consolidated statements of operations, stockholders' equity (deficiency) and cash flows for the years then ended, and the related notes to the consolidated financial statements (collectively, the financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2019 and 2018, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

 

The Company's Ability to Continue as a Going Concern

 

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the financial statements, the Company has insufficient revenue and capital commitments to fund the development of its planned products and to pay operating expenses. This raises substantial doubt about the Company's ability to continue as a going concern. Management's plans in regard to these matters also are described in Note 1. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

 

Basis for Opinion

 

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

We have served as the Company's auditor since 2016.

 

/s/ HOGANTAYLOR LLP

 

Tulsa, Oklahoma

April 2, 2020

 

 

THE CORETEC GROUP INC.

CONSOLIDATED BALANCE SHEETS

DECEMBER 31, 2019 AND 2018

 

  

See notes to consolidated financial statements

 

 

THE CORETEC GROUP INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

YEARS ENDED DECEMBER 31, 2019 AND 2018

 

 

See notes to consolidated financial statements

 

 

THE CORETEC GROUP INC.

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’  EQUITY (DEFICIENCY)

YEARS ENDED DECEMBER 31, 2019 AND 2018

 

 

See notes to consolidated financial statements

 

 

THE CORETEC GROUP INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

YEARS ENDED DECEMBER 31, 2019 AND 2018

 

 

See notes to consolidated financial statements

 

 

THE CORETEC GROUP INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS