Attached files

file filename
EX-32.1 - EXHIBIT 32.1 - ADM TRONICS UNLIMITED, INC.ex32-1.htm
EX-31.1 - EXHIBIT 31.1 - ADM TRONICS UNLIMITED, INC.ex31-1.htm
EX-21.1 - EXHIBIT 21.1 - ADM TRONICS UNLIMITED, INC.ex21-1.htm

FORM 10-K

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

 

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES

EXCHANGE ACT OF 1934

 

For the fiscal year ended March 31, 2017

 

[_] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES

EXCHANGE ACT OF 1934

 

For the transition period from __________ to __________

 

COMMISSION FILE NUMBER 0-17629

 

ADM TRONICS UNLIMITED, INC.

(Name of registrant as specified in its charter)

 

Delaware

22-1896032

(State or other jurisdiction of

(I.R.S. Employer Identification No.)

incorporation or organization)

 

 

224 Pegasus Avenue, Northvale, New Jersey 07647

(Address of Principal Executive Offices)     (Zip Code)

 

Registrant’s telephone number (201) 767-6040

 

SECURITIES REGISTERED PURSUANT TO SECTION 12(B) OF THE ACT: None

 

SECURITIES REGISTERED PURSUANT TO SECTION 12(G) OF THE ACT:

 

COMMON STOCK, $.0005 PAR VALUE

(Title of Class)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

 

Yes [ ] No [X]

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

 

Yes [ ] No [X]

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

 

Yes [X] No [ ]

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

 

Yes [X] No [ ]

 

 
 

 

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  [X]

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer

 

Accelerated filer

Non-accelerated filer

 

(Do not check if a smaller reporting company)

     

Smaller reporting company

     

Emerging growth company

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).

 

Yes [ ] No [X]

 

The aggregate market value of voting stock held by non-affiliates of the registrant as of September 30, 2015, the last business day of the registrant’s most recently completed second fiscal quarter was $9,048,074.

 

The number of shares of the Common Stock outstanding as of June 29, 2017 was 67,558,492.  Check this number, couldn’t read printout  

  

DOCUMENTS INCORPORATED BY REFERENCE

 

Not applicable. 

 

FORWARD LOOKING STATEMENTS

 

This Annual Report on Form 10-K contains various forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 and information that is based on management's beliefs as well as assumptions made by and information currently available to management. Although we believe that the expectations reflected in such forward-looking statements are reasonable, we can give no assurance that such expectations will prove to be correct. When used in this report, the words "anticipate," "believe," "estimate," "expect," "predict," "project" and similar expressions are intended to identify forward-looking statements. We cannot guarantee the accuracy of the forward-looking statements, and you should be aware that our actual results could differ materially from those contained in the forward-looking statements due to a number of factors, including the statements under "Risk Factors" set forth in "Item 1 - Description of Business" and the statements under "Critical Accounting Policies" set forth in "Item 6 - Management's Discussion and Analysis or Plan of Operation." Due to these uncertainties and risks, readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K.

 

Unless otherwise indicated in this prospectus, references to "we," "us," "our" or the "Company" refer to ADM Tronics Unlimited, Inc. and its subsidiaries.

 

 
 

 

 

PART I

 

ITEM 1. BUSINESS

 

COMPANY OVERVIEW

 

The Company is a technology-based developer and manufacturer of diversified lines of products and derives revenue from the production and sale of electronics for medical devices and other applications; environmentally safe chemical products for industrial, medical and cosmetic uses; and, research, development, regulatory and engineering services.

 

The Company is a corporation that was organized under the laws of the State of Delaware on November 24, 1969. Our operations are conducted through ADM Tronics Unlimited, Inc. ("ADM") and its subsidiary Sonotron Medical Systems, Inc. ("SMI").

  

COMPANY PRODUCTS AND SERVICES

 

ELECTRONICS FOR MEDICAL DEVICES AND OTHER APPLICATIONS

 

We develop and manufacture electronic technologies for non-invasive, electrotherapeutic and diagnostic medical devices as well as for veterinary and other applications. The products are manufactured at our Northvale facility which is an FDA-Registered Medical Device Manufacturing facility. We develop and manufacture our own proprietary products as well as on a contract basis for other companies. 

 

CONTRACT MANUFACTURING 

 

The Company derives revenues from contract manufacturing of electronic medical and other devices from non-affiliated customers. As of March 31, 2017, we had approximately $160,000 of back-log for electronic products.

 

SONOTRON TECHNOLOGY

 

SMI, a majority-owned subsidiary of ADM, has developed a technology, known as the Sonotron Technology, to treat subjects suffering from the pain of inflammatory joint conditions. Although some of the devices utilizing this technology are commercially available for the treatment of animals, none of such devices have received clearance from the U.S. Food and Drug Administration (the "FDA") for human application in the United States. Pursuant to a manufacturing agreement, the Company is the exclusive manufacturer of the Sonotron devices. The Sonotron Technology is the subject of a United States patent (the "Sonotron Patent"), which expired in April 2016.

 

ENVIRONMENTALLY SAFE CHEMICAL PRODUCTS FOR INDUSTRIAL USES

 

We develop, manufacture and sell chemical products to industrial users. Such products consist primarily of the following:

 

 

Water-based primers and adhesives;

 

Water-based coatings and resins;

 

Water-based chemical additives; and

 

Anti-static conductive paints, coating and other products.

 

Water-based primers and adhesives are chemical compounds used to bind different plastic films, metal foils and papers. Examples are the binding of polyethylene to polyester, nylon, vinyl, aluminum, polypropylene, paper and cellophane. Our water-based primers and adhesives are similar in function to solvent-based primers that are widely used to bind plastic films, papers and foils. Solvent-based systems have come under criticism since they have been found to be highly pollutant, dangerous to health and generally caustic in nature. Based upon our experience since 1969, including information furnished to us by certain of our customers, we believe that water-based systems have no known polluting effects and pose no known health hazards. There can, of course, be no assurance that any governmental restrictions will not be imposed on our water-based products or that such products will be accepted as replacements for solvent based products.

 

 

 
 

 

 

Water-based coatings and resins for the printing industry are used to impart properties to the printed substrate. Our coatings and resins can be used to coat printed material for glossy or aesthetic appeal to make such material virtually impervious to certain types of grease and to impart other characteristics required or desired for various products and specifications.

 

Certain of our water-based chemical additives are used to impart properties to inks and other chemical products used in the food packaging and printing industries. These additives are used for their ability to improve the performance of such products.

 

Through Anti-Static Industries, the assets of which were acquired in July 2009, we now develop and manufacture a full-line of anti-static products for commercial and industrial use through a division of our company that we refer to as “Antistatic Industries”. Antistatic Industries develops and distributes proprietary conductive paints, coatings and other products and accessories which can be used by electronics, computer, pharmaceutical and chemical companies to prevent, reduce or eliminate static electricity. Many industries are concerned with static electricity as it can be hazardous to personnel and damage corporate facilities, computers, electronic equipment and valuable parts. Antistatic Industries has a wide range of products including paints, hoses, garments, floor mats, rugs, strapping, tapes, hook-and-loop, adhesive products and many other specialized items, all with conductive properties. Antistatic Industries has also pioneered low volatile organic compound conductive and antistatic paint and coating formulations that can be used as replacements for paints and coatings made from hazardous solvents. Antistatic Industries seeks to continually develop new products through research and development for new and current customers to aid in their quest for maximum protection with less waste and rejects in their manufacturing processes by reducing or eliminating static electricity.

 

None of our chemical products are protected by patents, although the names of some of such products have been protected by trademarks. We do not believe that any such trademarks are material to our business. As of March 31, 2017, the dollar amount of backlog orders for our chemical products believed by us to be firm was not material. 

 

MEDICAL AND COSMETIC PRODUCTS

 

The Company has developed several medical and cosmetic topical products. The Company’s proprietary water-based, adhesive and related topical formulations are used for maxillofacial prosthetic medical applications and for professional makeup applications primarily for special makeup effects for film, TV and theatrical productions. 

 

RESEARCH, DEVELOPMENT, REGULATORY AND ENGINEERING SERVICES

 

The Company provides research, development, regulatory and engineering services to unaffiliated customers for the design, development and manufacturing of medical devices, electronics and other technologies and products (the “Engineering Services”). The Engineering Services are provided by the Company to customers both on a fee-for-services basis and on a project basis.

 

CUSTOMERS 

 

During the year ended March 31, 2017, one customer accounted for 59% of our net revenue. During the year ended March 31, 2016, one customer accounted for 45% of our net revenue. As of March 31, 2017 one customer represented 83% of our accounts receivable. As of March 31, 2016, one customer represented 43% of our accounts receivable. The loss of these major customers could have a material impact on our operations and cash flow.

 

 

 
 

 

 

MARKETING AND DISTRIBUTION

 

A majority of our product sales are distributed to customers directly from our headquarters in Northvale, NJ. Customers place purchase orders with us and products are then shipped via common carrier delivery on an "FOB shipping point" basis. A portion of the sales are accomplished through distributors who place purchase orders with us for certain quantities of our products which are shipped by common carrier to the distributor's respective warehouses. These stocking distributors then ship product to the ultimate customer via common carrier from their inventory of our products. Our contract manufacturing customers place orders with us for certain quantities of their products they desire to have us manufacture, typically providing a deposit with each order. Engineering Services are provided through written agreements with customers both on a fee-for-services basis and a project basis.

 

MANUFACTURER AND SUPPLIERS

 

MANUFACTURER

 

ADM manufactures its electronic and chemical products and SMI and other customers’ electronic products at its facilities located in Northvale, New Jersey.

  

ADM warranties the products it manufactures for SMI against defects in material and workmanship for a period of 90 days after the completion of manufacture. After such 90-day period, ADM has agreed to provide repair services for the products at its customary hourly repair rate plus the cost of any parts, components or items necessary to repair the products. 

 

Under contract manufacturing agreements, all inventions, patentable or otherwise, trade secrets, discoveries, ideas, writings, technology, know-how, improvements or other advances or findings relating to the entities' products and technologies shall be and become the exclusive proprietary and confidential information of such entity or any person to whom such entity may have assigned rights therein. ADM has no rights in any such proprietary or confidential information and is prohibited from using or disclosing any of such proprietary or confidential information for its own benefit or purposes, or for the benefit or purpose of any other person other than the entity without such entity's prior written consent. ADM has also agreed to cooperate with each entity in securing for it any patents, copyrights, trademarks or the like which it may seek to obtain in connection therewith. If ADM breaches any of the confidentiality agreements contained in the manufacturing agreement, or if these agreements are not sufficient to protect the entity's technology or are found to be unenforceable, the entity's competitors could acquire and use information that it considers to be our trade secrets and the entity may not be able to compete effectively.

 

Since ADM is the exclusive manufacturer of all of SMI's current and future products under the manufacturing agreement, if the operations of ADM are interrupted or if orders or orders of other customers of the Company exceed our manufacturing capabilities, we may not be able to deliver products on time and the entities may not be able to deliver their respective products to their respective customers on time. Under the terms of the manufacturing agreement, if ADM is unable to perform its obligations thereunder or is otherwise in breach of any provision thereof, SMI has the right, without penalty, to engage third parties to manufacture some or all of its products. In addition, if SMI elects to utilize a third-party manufacturer to supplement the manufacturing being completed by ADM, SMI has the right to require us to accept delivery of the products from these third-party manufacturers, finalize the manufacture of the products to the extent necessary to comply with FDA regulations and ensure that the design, testing, control, documentation and other quality assurance procedures during all aspects of the manufacturing process have been met.

 

As a manufacturer of medical devices, ADM is required to comply with quality requirements, which require manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all aspects of the manufacturing process. In addition, our manufacturing facility is required to be registered as a medical device manufacturing facility with the FDA and is subject to inspection by the FDA. The Company has been registered by the FDA as a Registered Medical Device Establishment since 1988 allowing it to manufacture medical devices in accordance with procedures outlined in FDA regulations, which include quality control and related activities. Such registration is renewable annually and although we do not believe that the registration will fail to be renewed by the FDA, there can be no assurance of such renewal.

 

 

 
 

 

 

SUPPLIERS 

 

We purchase the raw materials, parts, components and other items required to manufacture our products. We rely on a limited number of suppliers for such raw materials, parts, components and other items. Although there are many suppliers for each of these raw materials, parts, components and other items, we are dependent on a limited number of suppliers for many of the significant raw materials and components due to our customers’ requirements. We do not have any long-term or exclusive purchase commitments with any of our suppliers. The failure to maintain existing relationships with suppliers or to establish new relationships in the future could also negatively affect our ability to obtain raw materials and components used in the products in a timely manner. If we are unable to obtain ample supply of product from our existing suppliers or alternative sources of supply, we may be unable to satisfy orders which could reduce our revenues and adversely affect relationships with our customers.  Accordingly, in order to satisfy its customers' needs, we have maintained an inventory ranging, in dollar amounts, from 15% to 30% of sales of chemical products in the form of either raw materials or finished goods.

  

RESEARCH AND DEVELOPMENT 

 

During our fiscal years ended March 31, 2017 and 2016, research and development expenses with respect to company-sponsored research and development activities were approximately $168,812 and $91,774 respectively, which were incurred in our chemical business. During such fiscal years, we did not expend any funds on customer-sponsored research and development activities with respect thereto.

 

COMPETITION

 

Our businesses are highly competitive and substantially all of our competitors possess greater experience, financial resources, operating history and marketing capabilities than us. Although we do not believe that there are one or more dominant competitors in such industries, there can be no assurance that we will be able to effectively compete with any or all of our competitors on the basis of price, service or otherwise. Competitors may be better able to withstand a change in conditions and throughout the economy as a whole. In addition, current and anticipated future consolidation among our competitors and customers may cause us to lose market share as well as put downward pressure on pricing. Furthermore, there is a trend in industry toward relocation of manufacturing facilities to lower-cost regions such as Asia. Such relocation may permit some of our competitors to lower their costs and improve their competitive position. If we do not compete successfully, our business, operating margins, financial condition, cash flows and profitability could be adversely affected.

 

Our results of operations depend, in part, on our ability to expand our product offerings. We are committed to remaining a competitive producer and believe that our portfolio of new or re-engineered products is strong. However, we may not be able to develop new products, re-engineer existing products successfully or bring them to competitive, we may not be able to continue to attract and retain customers to which we sell our products.

 

INSURANCE

 

The Company may be exposed to potential product liability claims by those who use our products. Therefore, we maintain a general liability insurance policy, which includes aggregate product liability coverage of $3,000,000 for certain of our products. We believe that our present insurance coverage is adequate for the types of products we currently market. There can be no assurance, however, that such insurance will be sufficient to cover potential claims or that the present level of coverage will be available in the future at a reasonable cost.

 

EMPLOYEES

 

As of March 31, 2017, we had 21 full-time employees and 6 part-time employees. As of such date, we had one salaried employee in an executive or managerial position. We believe our relationship with our employees is good.

 

ITEM 1A. RISK FACTORS

 

An investment in our stock involves a high degree of risk. You should carefully consider the following information, together with other information in this annual report, before buying shares of our stock. If any of the following risks or uncertainties occur, our business, financial condition and results of operations could be materially and adversely affected, the trading price of our stock could decline and you may lose all or a part of the money you paid to buy our stock. 

 

 
 

 

 

RISKS RELATING TO OUR OPERATIONS

 

NEW ENVIRONMENTAL OR OTHER REGULATIONS COULD INCREASE THE COMPANY'S OPERATING COSTS.

 

Like other manufacturers, the Company is subject to a broad range of Federal, state and local laws and requirements, including those governing discharges in the air and water, the handling and disposal of solid and hazardous substances and wastes, the remediation of contamination associated with the release of hazardous substances, work place safety and equal employment opportunities. We have made expenditures to comply with such laws and requirements. We believe, based on information currently available to management, that we are in compliance with applicable environmental and other legal requirements and that we will not require material capital expenditures to maintain compliance with such requirements in the foreseeable future. Governmental authorities have the power to enforce compliance with such laws and regulations, and violators may be subject to penalties, injunctions or both. Third parties may also have the right to enforce compliance with such laws and regulations. As ADM develops new products, those products may become subject to additional review and approval requirements governing the sale and use of its products. Although our manufacturing processes do not currently result in the generation of hazardous wastes, this may not always be the case and material costs or liabilities may be incurred by us in the future as a result of the manufacturing operations. It is also possible that other developments, such as additional or increasingly strict requirements of laws and regulations of these types, or enforcement policies there under, could significantly increase our costs of operations.

 

BECAUSE WE USE VARIOUS MATERIALS AND SUBSTANCES IN MANUFACTURING OUR CHEMICAL PRODUCTS, OUR PRODUCTION FACILITIES ARE SUBJECT TO OPERATING HAZARDS THAT COULD CAUSE PERSONAL INJURY AND LOSS OF LIFE, SEVERE DAMAGE TO, OR DESTRUCTION OF, PROPERTY AND EQUIPMENT AND ENVIRONMENTAL CONTAMINATION.

 

We are dependent on the continued operation of our production and distribution facility. This facility is subject to hazards associated with the manufacture, handling, storage and transportation of chemical materials and products, including natural disasters, mechanical failure, unscheduled downtime, labor difficulties, transportation interruptions, and environmental hazards, such as spills, discharges or releases of toxic or hazardous substances and remediation complications. These hazards can cause personal injury and loss of life, severe damage to, or destruction of, property and equipment and environmental contamination and other environmental damage and could have a material adverse effect on our financial condition. In addition, due to the nature of our business operations, we could become subject to scrutiny from environmental action groups.

 

FAILURE TO DEVELOP NEW CHEMICAL PRODUCTS AND/OR IMPROVE OUR EXISTING PRODUCTS WILL MAKE US LESS COMPETITIVE.

 

Our results of operations depend, in part, on our ability to expand our product offerings. We are committed to remaining a competitive producer and believe that our portfolio of new or re-engineered products is strong. However, we may not be able to continue to develop new products, re-engineer our existing products successfully or bring them to market in a timely manner. While we believe that the products, pricing and services we offer customers are competitive, we may not be able to continue to attract and retain customers to whom we sell our products.

 

FAILURE TO MAKE CONTINUED IMPROVEMENTS IN OUR PRODUCTIVITY COULD HURT OUR COMPETITIVE POSITION.

 

In order to obtain and maintain a competitive position, we believe that we must continue to make improvements in our productivity. When we invest in new technologies or processes, we face risks related to cost overruns and unanticipated technical difficulties. Our inability to anticipate, respond to or utilize changing technologies could have a material adverse effect on our business and our results of operations.

 

 

 
 

 

 

CHANGES IN OUR CUSTOMERS' PRODUCTS COULD REDUCE THE DEMAND FOR OUR CHEMICAL PRODUCTS, WHICH MAY DECREASE OUR NET SALES AND OPERATING MARGINS.

 

Our chemical products are used for a broad range of applications by our customers. Changes, including technological changes, in our customers' products or processes may make our chemical products unnecessary, which would reduce the demand for those products. Other customers may find alternative materials or processes that no longer require our products. If the demand for our chemical products is reduced, our net sales and operating margins may be reduced as well.

 

WE HAVE FEW PROPRIETARY RIGHTS WITH RESPECT TO OUR CHEMICAL PRODUCTS, THE LACK OF WHICH MAY MAKE IT EASIER FOR OUR COMPETITORS TO COMPETE AGAINST US.

 

None of our chemical products are protected by patents. We do attempt to protect the names of some of our chemical products through trademarks and some of our other limited proprietary property through trade secret, nondisclosure and confidentiality measures; however, such protections may not preclude competitors from developing similar technologies.

 

CUSTOMERS OUTSOURCE THE MANUFACTURING OF THEIR PRODUCTS TO US AND IF OUR OPERATIONS ARE INTERRUPTED OR IF OUR ORDERS EXCEED OUR MANUFACTURING CAPABILITIES, THEY MAY NOT BE ABLE TO DELIVER THEIR PRODUCTS TO CUSTOMERS ON TIME.

 

We operate a single facility and have limited capacity that may be inadequate if customers place orders for unexpectedly large quantities of products, or if our other customers place large orders of products. In addition, if our operations were halted or restricted, even temporarily, or we are unable to fulfill large orders, our customers could experience business interruption, increased costs, damage to their reputations and loss of their customers. Although customers have the right to utilize other manufacturers, such manufacturers of their products need to be licensed with the FDA, and identifying and qualifying a new manufacturer to replace us as the manufacturer of their products could take several months during which time, they would likely lose customers and our revenues could be materially delayed and/or reduced. In addition, our failure to produce such products could result in claims against us.

 

WE DEPEND ON A LIMITED NUMBER OF SUPPLIERS FOR THE COMPONENTS AND RAW MATERIALS USED IN OUR PRODUCTS AND THE PRODUCTS MANUFACTURED FOR THIRD PARTIES, AND ANY INTERRUPTION IN THE AVAILABILITY OF THESE COMPONENTS AND RAW MATERIALS COULD REDUCE OUR REVENUE.

 

We rely on a limited number of suppliers for the components and raw materials used in the products that we manufacture for others. Although there are many suppliers for each of the component parts and raw materials, we are dependent on a single or limited number of suppliers for many of the significant components and raw materials due to our customers’ specifications. This reliance involves a number of significant risks, including:

 

unavailability of materials and interruptions in delivery of components and raw materials from suppliers;

manufacturing delays caused by such unavailability or interruptions in delivery; and

fluctuations in the quality and the price of components and raw materials.

 

We do not have any long-term or exclusive purchase commitments with any of our suppliers. Failure to maintain existing relationships with suppliers or to establish new relationships in the future could also negatively affect our ability to obtain components and raw materials used in these products in a timely manner. If we are unable to obtain ample supply of product from existing suppliers or alternative sources of supply, we may be unable to satisfy our customers' orders which could reduce our revenues and adversely affect our relationships with these customers.

 

 

 
 

 

   

OUR ABILITY TO EXECUTE OUR BUSINESS PLAN DEPENDS ON THE SCOPE OF OUR INTELLECTUAL PROPERTY RIGHTS AND NOT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. THE VALIDITY, ENFORCEABILITY AND COMMERCIAL VALUE OF THESE RIGHTS ARE HIGHLY UNCERTAIN.

 

Our ability to compete effectively with other companies is materially dependent upon the proprietary nature of our technologies. We rely primarily on patents and trade secrets to protect our products.

 

Third parties may seek to challenge, invalidate, circumvent or render unenforceable any patents or proprietary rights owned by us based on, among other things:

 

subsequently discovered prior act;

lack of entitlement to the priority of an earlier, related application; or

failure to comply with the written description, best mode, enablement or other applicable requirements.

 

In general, the patent position of medical device companies is highly uncertain, still evolving and involve complex legal, scientific and factual questions. We are at risk that:

 

other patents may be granted with respect to the patent applications filed by us; and

any patents issued to us may not provide commercial benefit to us or will be infringed, invalidated or circumvented by others.

 

The United States Patent and Trademark Office currently has a significant backlog of patent applications, and the approval or rejection of patents may take several years. Prior to actual issuance, the contents of United States patent applications are generally published 18 months after filing. Once issued, such a patent would constitute prior art from its filing date, which might predate the date of a patent application on which we rely. Conceivably, the issuance of such a prior art patent, or the discovery of "prior art" of which we are currently unaware, could invalidate a patent of ours or prevent commercialization of a product claimed thereby.

 

Although we generally conduct a cursory review of issued patents prior to engaging in research or development activities, we may be required to obtain a license from others to commercialize any of our new products under development. If patents that cover our existing or new products are issued to other companies, there can be no assurance that any necessary license could be obtained on favorable terms or at all.

 

There can be no assurance that we will not be required to resort to litigation to protect our patented technologies and other proprietary rights or that we will not be the subject of additional patent litigation to defend our existing and proposed products and processes against claims of patent infringement or any other intellectual property claims. Such litigation could result in substantial costs, diversion of management's attention, and diversion of our resources.

 

We also have applied for patent protection in several foreign countries. Because of the differences in patent laws and laws concerning proprietary rights between the United States and foreign countries, the extent of protection provided by patents and proprietary rights granted to us by the United States may differ from the protection provided by patents and proprietary rights granted to us by foreign countries.

 

We attempt to protect our trade secrets, including the processes, concepts, ideas and documentation associated with our technologies, through the use of confidentiality agreements and non-competition agreements with our current employees, and with other parties to whom we have divulged such trade secrets. If our employees or other parties breach our confidentiality agreements and non-competition agreements or if these agreements are not sufficient to protect our technology or are found to be unenforceable, our competitors could acquire and use information that we consider to be our trade secrets and we may not be able to compete effectively. Most of our competitors have substantially greater financial, marketing, technical and manufacturing resources than we have and we may not be profitable if our competitors are also able to take advantage of our trade secrets. 

 

We may decide for business reasons to retain certain knowledge that we consider proprietary as confidential and elect to protect such information as a trade secret, as business confidential information or as know-how. In that event, we must rely upon trade secrets, know-how, confidentiality and non-disclosure agreements and continuing technological innovation to maintain our competitive position. There can be no assurance that others will not independently develop substantially equivalent proprietary information or otherwise gain access to or disclose such information.

 

 

 
 

 

 

IF THE FDA OR OTHER STATE OR FOREIGN AGENCIES IMPOSE REGULATIONS THAT AFFECT OUR MEDICAL DEVICE PRODUCTS, OUR DEVELOPMENT, MANUFACTURING AND MARKETING COSTS WILL BE INCREASED.

 

The testing and production of medical devices are subject to regulation by the FDA as devices under the 1976 Medical Device Amendments to the Federal Food, Drug and Cosmetic Act. In the United States, medical devices must be:

 

manufactured in registered and quality approved establishments by the FDA; and

produced in accordance with the FDA Quality System Regulation ("QSR") for medical devices.

 

As a result, we, as the manufacturer of other parties' devices, are required to comply with QSR requirements and if we fail to comply with these requirements, these other third parties will need to find another company to manufacture its devices. In addition, the Company's manufacturing facility:

 

is required to be registered as a medical device manufacturing facility with the FDA; and

is subject to inspection by the FDA.

 

The FDA can impose civil and criminal enforcement actions and other penalties on us if we fail to comply with stringent FDA regulations.

 

Medical device manufacturing facilities must maintain records, which are available for FDA inspectors documenting that the appropriate manufacturing procedures were followed. The FDA has authority to conduct inspections of our facility. Labeling and promotional activities are also subject to scrutiny by the FDA and, in certain instances, by the Federal Trade Commission. Any failure by us to take satisfactory corrective action in response to an adverse inspection or to comply with applicable FDA regulations could result in enforcement action against us, including a public warning letter, a shutdown of manufacturing operations, a recall of our products, civil or criminal penalties or other sanctions. From time to time, the FDA may modify such requirements, imposing additional or different requirements which may require us to alter our business methods which could result in increased expenses.

 

RISKS RELATED TO OUR COMPANY

 

At March 31, 2016, we had an accumulated deficit of approximately $31 million. We may incur additional operating losses, as well as negative cash flows from operations, in the future.

 

We are highly dependent upon certain customers to generate our revenues. For the fiscal year ended March 31, 2017, one customers accounted for 59% of revenue. For the fiscal year ended March 31, 2016, one customers accounted for 45% of revenue. All customer purchases are made through purchase orders and we do not have any long-term contracts with customers. The complete loss of, or significant reduction in business from, or a material adverse change in the financial condition of, any of such customers will cause a material and adverse change in our revenues and operating results.

 

WE MAY BE EXPOSED TO POTENTIAL RISKS RELATING TO OUR INTERNAL CONTROL OVER FINANCIAL REPORTING AND OUR ABILITY TO HAVE THE OPERATING EFFECTIVENESS OF OUR INTERNAL CONTROLS ATTESTED TO BY OUR INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM.

 

As directed by Section 404 of the Sarbanes-Oxley Act of 2002 (“Section 404”) the Securities and Exchange Commission (“SEC”) adopted rules requiring public companies to include a report of management on the company’s internal control over financial reporting in their annual reports on Form 10-K. A report of our management is included in our Annual Report on Form 10-K. We can provide no assurance that we will be able to comply with all of the requirements imposed thereby. In the event we identify significant deficiencies or material weaknesses in our internal control over financial reporting that we cannot remediate in a timely manner, investors and others may lose confidence in the reliability of our financial statements.

 

 

 
 

 

 

WE MAY BE EXPOSED TO PRODUCT LIABILITY CLAIMS FOR WHICH OUR INSURANCE MAY BE INADEQUATE.

 

Our business exposes us to potential product liability risks, which are inherent in the testing, manufacturing and marketing of chemical products and electronic devices. Although we maintain a general liability insurance policy, which includes aggregate product liability coverage of $3,000,000 for certain of our products, there can be no assurance, that such insurance will be sufficient to cover potential claims or that the present level of coverage will be available in the future at a reasonable cost.

 

While we are not aware of side-effects resulting from the use of any of our products, there may be unknown long-term effects of their use that may result in product liability claims in the future. Further, we cannot provide any assurance that:

 

our insurance will provide adequate coverage against potential liabilities if a product causes harm or fails to perform as promised;

adequate product liability insurance will continue to be available in the future; or

our insurance can be maintained on acceptable terms.

 

The obligation to pay any product liability claim in excess of whatever insurance we are able to obtain would increase our expenses and could greatly reduce our assets. See "Item 1. Business - Insurance."

 

THE LOSS OF ANY OF OUR EXECUTIVE OFFICER OR KEY PERSONNEL MAY ADVERSELY AFFECT OUR OPERATIONS AND OUR ABILITY TO EXECUTE OUR GROWTH STRATEGY.

 

Our ability to execute our business plan depends upon the continued services of Andre' DiMino, our President and Chief Executive Officer, as well as our key technology, marketing, sales and support personnel. In January 2013, the Company entered into an employment agreement with Mr. DiMino containing non-compete, confidentiality and other provisions for the benefit of the Company. However, such agreement has provisions for early termination by the Company and/or Mr. DiMino. We do not have employment or consulting agreements containing non-compete agreements with certain of our key personnel, and we may not be able to retain these individuals. If we lost the services of Mr. DiMino or our key personnel, our business may be adversely affected and our stock price may decline. In addition, our ability to execute our business plan is dependent on our ability to attract and retain additional highly skilled personnel.

 

OUR EXECUTIVE OFFICER AND ENTITIES AFFILIATED WITH HIM HAVE SUBSTANTIAL CONTROL OVER US, WHICH COULD DELAY OR PREVENT A CHANGE IN OUR CORPORATE CONTROL FAVORED BY OUR OTHER SHAREHOLDERS.

 

Our executive officer and director, Mr. DiMino, together with members of the DiMino family, and entities affiliated with them may be deemed to beneficially own, in the aggregate, approximately 47% of our outstanding common stock. The interests of our current officer and director shareholder may differ from the interests of our other shareholders. As a result, the current officer and director would have the ability to exercise substantial control over all corporate actions requiring shareholder approval, irrespective of how our other shareholders may vote, including the following actions:

 

the election of directors;

adoption of stock option plans;

the amendment of charter documents; or

the approval of certain mergers and other significant corporate transactions, including a sale of substantially all of our assets.

 

 

 
 

 

 

PENNY STOCK REGULATIONS MAY IMPOSE CERTAIN RESTRICTIONS ON MARKETABILITY OF OUR SECURITIES.

 

Our common stock is subject to penny stock rules, which may discourage broker-dealers from effecting transactions in our common stock or affect their ability to sell our securities. As a result, purchasers and current holders of our securities could find it more difficult to sell their securities. Our stock is traded on the Over-the-Counter Bulletin Board (the “OTC Bulletin Board”). Trading volume of OTC Bulletin Board stocks have been historically lower and more volatile then stocks traded on an exchange or the Nasdaq Stock Market. In addition, we may be subject to rules of the SEC that impose additional requirements on broker-dealers when selling penny stocks to persons other than established customers and accredited investors. In general, an accredited investor is a person with assets in excess of $1,000,000 or annual income exceeding $200,000 individually, or $300,000 together with his or her spouse. The relevant SEC regulations generally define penny stocks to include any equity security not traded on an exchange or the Nasdaq Stock Market with a market price (as defined in the regulations) of less than $5 per share. Under the penny stock regulations, a broker-dealer must make a special suitability determination as to the purchaser and must have the purchaser's prior written consent to the transaction. Prior to any transaction in a penny stock covered by these rules, a broker-dealer must deliver a disclosure schedule about the penny stock market prepared by the SEC. Broker-dealers must also make disclosure concerning commissions payable to both the broker-dealer and any registered representative and provide current quotations for the securities. Finally, broker-dealers are required to send monthly statements disclosing recent price information for the penny stock held in an account and information on the limited market in penny stocks.

 

OUR STOCK PRICE, LIKE THAT OF MANY SMALL COMPANIES, HAS BEEN AND MAY CONTINUE TO BE VOLATILE.

  

We expect that the market price of our common stock will fluctuate as a result of variations in our quarterly operating results and other factors beyond our control. These fluctuations may be exaggerated if the trading volume of our common stock is low.

 

WE HAVE NOT PAID DIVIDENDS IN THE PAST AND DO NOT EXPECT TO PAY DIVIDENDS IN THE FUTURE, AND ANY RETURN ON INVESTMENT MAY BE LIMITED TO THE VALUE OF YOUR STOCK.

 

We have never paid any cash dividends on our common stock and do not anticipate paying any cash dividends on our common stock in the foreseeable future and any return on investment may be limited to the value of your stock. We plan to retain any future earnings to finance growth.

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

 

Not applicable 

 

ITEM 2. PROPERTIES

 

We are headquartered at 224 Pegasus Avenue, Northvale, New Jersey. We lease approximately 16,000 square feet of combined office and warehouse space from an unaffiliated third party with a monthly rent of $8,073 subject to annual increases. The lease expires in June 2019. The Company and its subsidiary utilize portions of the leased space.

 

We believe that our existing facilities are suitable as office, storage, laboratory and manufacturing space, and are adequate to meet our current needs. We further believe that such properties are adequately covered by insurance.

 

We do not own any real property for use in our operations or otherwise.

 

ITEM 3. LEGAL PROCEEDINGS

 

NONE

 

ITEM 4. MINE SAFETY DISCLOSURES

 

Not applicable

 

 

 
 

 

 

PART II

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

 

MARKET INFORMATION

 

The Company's common stock trades on the OTCQB Marketplace, operated by OTC Markets Group, Inc. under the symbol "ADMT."

 

The table below sets forth the high and low bid information for our common stock on the OTCQB Marketplace for the indicated periods and reflects inter-dealer prices, without retail mark-up, mark-down, or commission, and may not necessarily represent actual transactions. Where did you get these numbers? I didn’t correct because it dosen’t match anything in the workpapers

 

 

Quarter Ended

 

High Bid

   

Low Bid

 
                 

Fiscal 2017

               

31-Mar-17

  $ 0.19     $ 0.18  

31-Dec-16

  $ 0.19     $ 0.16  

30-Sep-16

  $ 0.17     $ 0.15  

30-Jun-16

  $ 0.18     $ 0.18  
                 

Fiscal 2016

               

31-Mar-16

  $ 0.17     $ 0.16  

31-Dec-15

  $ 0.17     $ 0.12  

30-Sep-15

  $ 0.22     $ 0.21  

30-Jun-15

  $ 0.17     $ 0.17  

   

HOLDERS OF RECORD

 

As of March 31, 2017, 67,298,492 shares of the Company's common stock were issued and outstanding. On March 31, 2017, there were 1,326 shareholders of record. 

 

DIVIDENDS

 

The Company has never paid any cash dividends on its common stock and has no intention of paying cash dividends in the foreseeable future. The Company intends to retain all earnings, if any, for use in the operation and expansion of its business.

 

EQUITY COMPENSATION PLAN

 

As of March 31, 2017, we did not have any compensation plans (including individual compensation arrangements) under which our equity securities were authorized for issuance.

 

ITEM 6. SELECTED FINANCIAL DATA.

 

Not Applicable

 

 

 
 

 

 

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION

 

FORWARD-LOOKING STATEMENTS

 

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the "safe harbor" provisions under section 21E of the Securities and Exchange Act of 1934 and the Private Securities Litigation Act of 1995. We use forward-looking statements in our description of our plans and objectives for future operations and assumptions underlying these plans and objectives. Forward-looking terminology includes the words "may", "expects", "believes", "anticipates", "intends", "forecasts", "projects", or similar terms, variations of such terms or the negative of such terms. These forward-looking statements are based on management's current expectations and are subject to factors and uncertainties which could cause actual results to differ materially from those described in such forward-looking statements. We expressly disclaim any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained in this Form 10-K to reflect any change in our expectations or any changes in events, conditions or circumstances on which any forward-looking statement is based. Factors which could cause such results to differ materially from those described in the forward-looking statements include those set forth under "Item. 1 Description of Business – Risk Factors" and elsewhere in, or incorporated by reference into this Annual Report on Form 10-K. 

  

CRITICAL ACCOUNTING POLICIES

 

REVENUE RECOGNITION

 

Revenues are recognized when products are shipped to end users. Shipments to distributors are recognized as sales where no right of return exists. Shipping and handling charges and costs are immaterial. We offer a limited 90-day warranty on our electronics products and a limited 5-year warranty on our electronic controllers for spas and hot tubs. We have no other post shipment obligations and sales returns have been immaterial. To date warranty expense has been less than $2,000 annually and accordingly, due to the immaterial amount, no accrual for future warranty costs were recognized at delivery of the product. 

 

USE OF ESTIMATES

 

Our discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to reserves, deferred tax assets and valuation allowance, impairment of long-lived assets, fair value of equity instruments issued to consultants for services and fair value of equity instruments issued to others. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions; however, we believe that our estimates, including those for the above described items, are reasonable.

 

RECENTLY ISSUED ACCOUNTING PRONOUNCEMENTS

 

In May 2014, the FASB issued ASU 2014-09, “Revenue from Contracts with Customers.” This standard applies to any entity that uses the guidance of Generally Accepted Accounting Principles (“GAAP”) for entering into contracts with customers to transfer goods or services or enters into contracts for the transfer of nonfinancial assets unless those contracts are within the scope of other standards. It requires that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration the entity expects to receive for the exchange of goods or services. In August 2015, the FASB issued ASU 2015-14, deferring the effective date of implementation to annual periods beginning after December 15, 2017. The Company is still evaluating the potential impact on the Company’s financial statements.

 

 

 
 

 

 

In August 2014, the FASB issued ASU 2014-15, “Presentation of Financial Statements-Going Concern. Disclosure of Uncertainties about Entity’s Ability to Continue as a Going Concern.” Currently, GAAP lacks guidance about management’s responsibility to evaluate whether there is substantial doubt about an entity’s ability to continue as a going concern. This amendment now provides guidance by providing a definition of substantial doubt, requires evaluation by management every reporting period for going concern issues, provides principles for considering any mitigating effects implemented by management, and the disclosures required for the assessment period of one year after issuance of the financial statements. This update becomes effective for interim and annual recording periods beginning after December 15, 2016, with early application permitted. The Company adopted this amendment effective April 2017. This amendment will have no material impact on the Company’s financial statements.

 

In November 2015, the FASB issued ASU 2015-17, “Income Taxes, Balance Sheet Classifications of Deferred Taxes.” This amendment simplifies the presentation of deferred taxes by requiring that all deferred tax liabilities and assets now be recorded as noncurrent. This amendment is effective for interim and annual reporting periods beginning after December 15, 2016 with early adoption permissible. The Company adopted this amendment effective March 2017.

 

In July 2015, the FASB issued ASU 2015-11, “Inventory, Simplifying the Measurement of Inventory.” This amendment only applies to entities that use the first-in, first-out (FIFO) or average cost methods of valuing inventory. Entities should now measure inventory at the lower of cost or net realizable value. This amendment aligns measurement of inventory in GAAP with the International Financial Reporting Standards (IFRS). This amendment is effective for annual periods beginning after December 15, 2016 with early adoption permitted. The Company adopted this amendment in April 2017 and is not expected to have a material impact on the Company’s financial statements.

 

In November 2015, the FASB issued ASU 2015-17, “Income Taxes, Balance Sheet Classifications of Deferred Taxes.” This amendment simplifies the presentation of deferred taxes by requiring that all deferred tax liabilities and assets now be recorded as noncurrent. This amendment is effective for interim and annual reporting periods beginning after December 15, 2016 with early adoption permissible. The Company adopted this amendment effective January 2017. This amendment will have no material impact on the Company’s financial statements.

 

In February 2016, the Financial Accounting Standards Board (FASB) issued ASU 2016-02, “Leases”, which is intended to improve financial reporting for lease transactions. This ASU will require organizations that lease assets, such as real estate and manufacturing equipment, to recognize on assets and liabilities on their balance sheet for the rights to use those assets for the lease term and obligations to make lease payments created by those leases that have terms of greater than 12 months. The recognition, measurement, and presentation of expenses and cash flows arising from a lease by a lessee primarily will depend on its classification as finance or operating lease. This ASU will also require disclosures to help investors and other financial statement users better understand the amount and timing of cash flows arising from leases. These disclosures will include qualitative and quantitative requirements, providing additional information about the amounts recorded in the financial statements. This ASU will be adopted by the Company in the first quarter of 2019. We do not believe that this ASU will have a material impact on our financial statements.

 

In June 2016, the FASB issued ASU-2016-13 “Financial Instruments – Credit Losses”. This guidance affects organizations that hold financial assets and net investments in leases that are not accounted for at fair value with changes in fair value reported in net income. The guidance requires organizations to measure all expected credit losses for financial instruments at the reporting date based on historical experience, current conditions and reasonable and supportable forecasts. It is effective for fiscal years beginning after December 15, 2019. The Company is evaluating the potential impact on the Company’s financial statements.

 

In March 2016, the FASB issued ASU 2016-09, “Improvement to Employee Share-Based Payment Accounting.” The new guidance will require entities to recognize all income tax effects of awards in the income statement when the awards vest or are settled. It also will allow an employer to repurchase more of an employee’s shares than it can today for tax withholding purposes without triggering liability accounting and to make a policy election to account for forfeitures as they occur. For public business entities, the guidance is effective for fiscal years beginning after December 15, 2016 and interim periods within those years. For all other entities, it is effective for fiscal years beginning December 15, 2017, and interim periods within fiscal years beginning after December 15, 2018. Early adoption is permitted, but all of the guidance must be adopted in the same period. The Company is still evaluating the potential impact on the Company’s financial statements.

 

 

 
 

 

 

Management does not believe that any other recently issued, but not yet effective accounting pronouncement, if adopted, would have a material effect on the accompanying consolidated financial statements.

 

 

BUSINESS OVERVIEW

 

ADM is a corporation that was organized under the laws of the State of Delaware on November 24, 1969. During the years ended March 31, 2017 and 2016, our operations were conducted through ADM itself and its subsidiary, Sonotron.

 

We are a technology-based developer and manufacturer of diversified lines of products and services in the following areas: electronics for non-invasive medical and other applications; research, development, regulatory and engineering services; and, environmentally safe chemical products for industrial, cosmetic and topical uses.

 

RESULTS OF OPERATIONS FOR THE YEAR ENDED MARCH 31, 2017 AS COMPARED TO MARCH 31, 2016.

 

For the Year Ended March 31, 2017

                               
   

Chemical

   

Electronics

   

Engineering

   

Total

 

Revenue

  $ 1,285,353     $ 1,820,490     $ 2,165,388     $ 5,271,231  

Cost of Sales

    695,435       936,265       979,793       2,611,493  

Gross Profit

    589,918       884,225       1,185,595       2,659,738  

Gross Profit Percentage

    46 %     49 %     55 %     50.5 %
                                 

Operating Expenses

    373,547       522,741       624,889       1,521,177  

Operating Income (Loss)

    216,371       361,484       560,706       1,138,561  

Other income (expenses)

    (439 )     (623 )     (739 )     (1,801 )

Income (loss) before benefit from income taxes

  $ 215,932     $ 360,861     $ 559,967     $ 1,136,760  

 

For the Year Ended March 31, 2016

                               
   

Chemical

   

Electronics

   

Engineering

   

Total

 

Revenue

  $ 1,412,179     $ 849,447     $ 2,251,444     $ 4,513,070  

Cost of Sales

    557,941       556,678       989,635       2,104,254  

Gross Profit

    854,238       292,769       1,261,809       2,408,816  

Gross Profit Percentage

    60 %     34 %     56 %     53.4 %
                                 

Operating Expenses

    730,387       250,986       1,164,460       2,145,833  

Operating Income (Loss)

    123,851       41,783       97,349       262,983  

Other income (expenses)

    (515 )     (310 )     (820 )     (1,645 )

Income (loss) before benefit from income taxes

  $ 123,336     $ 41,473     $ 96,529     $ 261,338  

 

 

 
 

 

 

Variance

                               
   

Chemical

   

Electronics

   

Engineering

   

Total

 

Revenue

  $ (126,826 )   $ 971,043     $ (86,056 )   $ 758,161  

Cost of Sales

    137,494       379,587       (9,842 )     507,239  

Gross Profit

    (264,320 )     591,456       (76,214 )     250,922  

Gross Profit Percentage

    -15 %     14 %     -1 %     -3 %
                                 

Operating Expenses

    (356,840 )     271,755       (539,571 )     (624,656 )

Operating Income (Loss)

    92,520       319,701       463,357       875,578  

Other income (expenses)

    76       (313 )     81       (156 )

Income (loss) before benefit from income taxes

  $ 92,596     $ 319,388     $ 463,438     $ 875,422  

  

REVENUES AND GROSS MARGINS 

 

Revenues increased $758,161, or 17% from the prior year, which resulted from decreases of $86,056 in the engineering segment and $126,826 in the chemical segment offset by an increase of $971,043 in the electronics segment. The increase in the electronics division resulted from an increase in sales to one customer. The decrease in engineering services was primarily the result of a reduction of several projects for one customer.

 

The decrease in gross profit in the chemical segment and increase in gross profit in the electronic segment resulted from changes in the mix of products sold.

 

The increase in gross profit in the engineering segment resulted from better utilization of labor due to the increased revenue from new projects for one customer.

   

OPERATING INCOME (LOSS)

 

Income from operations for the years ended March 31, 2017 and 2016 was $1,138,561 and $262,983 respectively, an increase of $875,578 or 333%.

 

Selling, general and administrative expenses decreased by $209,408, or 24%, from $1,451,399 to $1,241,991, mainly due to decreased royalties and commissions of $382,067 and decreased Engineering and Regulatory expenses of $82,405 offset by increased salaries, wages and payroll taxes of $62,708, increased professional fees of $33,110, increased stock based compensation for consulting services of $98,600, increased advertising and promotion expenses of $10,505, and increased Taxes, Permits and Fees of $35,956.

 

NET INCOME AND NET LOSS PER SHARE

 

Net income for the fiscal years ended March 31, 2017 and 2016 was $1,205,760 or $0.02 per share and $1,118,338 or $0.02 per share, respectively.

 

LIQUIDITY AND CAPITAL RESOURCES

 

At March 31, 2017, we had cash and cash equivalents of $1,982,276 as compared to $1,398,848 at March 31, 2016. The increase of $583,428 was primarily the result of cash provided in operations in the amount of $492,918 and cash provided by investing activities of $201,576 offset by cash used by financing activities of $111,066. We expect to have enough cash to fund operations for the next twelve months.

 

 

 
 

 

 

Future Sources of Liquidity:

 

We expect our primary source of cash during fiscal 2017 to be net cash provided by operating activities. We expect that growth in profitable revenues and continued focus on new customers will enable us to continue to generate cash flows from operating activities.

 

If we do not generate sufficient cash from operations, face unanticipated cash needs or do not otherwise have sufficient cash, we have the ability to reduce certain expenses depending on the level of business operation.

 

Based on current expectations, we believe that our existing cash of $1,982,276 as of March 31, 2017 and other potential sources of cash will be sufficient to meet our cash requirements. Our ability to meet these requirements will depend on our ability to generate cash in the future, which is subject to general economic, financial, competitive, legislative, regulatory and other factors that are beyond our control.

 

Although we expect available funds and funds generated from our operations to be sufficient to meet our anticipated needs for a minimum of 12 months, we may need to obtain additional capital to continue to operate and grow our business. Our cash requirements may vary materially from those currently anticipated due to changes in our operations, including our marketing and sales activities, product development, and the timing of our receipt of revenues. We do not have any material external sources of liquidity or unused sources of funds. Our ability to obtain additional financing in the future will depend in part upon the prevailing capital market conditions, as well as our business performance. There can be no assurance that we will be successful in our efforts to arrange additional financing on terms satisfactory to us or at all. Additionally, we will continue to reduce certain of our expenses in order to assist in meeting our capital needs.

 

OPERATING ACTIVITIES 

 

Net cash provided by operating activities was $492,918 for the fiscal year ended March 31, 2017. Cash provided during the year ended March 31, 2017 was primarily due to a net income of $1,205,760, stock based compensation of $98,600 and a decrease in operating liabilities of $16,800, depreciation and amortization of $17,538 offset by an increase in net operating assets of $785,123.

 

Net cash provided by operating activities was $935,211 for the fiscal year ended March 31, 2016. Cash provided during the year ended March 31, 2016 was primarily due to a net income of $1,118,338, stock based compensation of $598,699, deferred income taxes of $857,000 and a decrease in operating liabilities of $89,092, depreciation and amortization of $5,015 offset by a decrease in net operating assets of $18,931.

    

INVESTING ACTIVITIES

 

For the fiscal year ended March 31, 2017, net cash provided by investing activities was $201,576. The primary increase in cash was from the release of restrictions in the restricted cash account of $233,050 offset by payments in the amount of $31,474 for the purchase of equipment.

   

For the fiscal year ended March 31, 2016, net cash used by investing activities was $27,758. The primary decrease in cash was from payments in the amount of $525 for restricted cash and $27,233 for the purchase of equipment.

  

 FINANCING ACTIVITIES

 

For the fiscal year ended March 31, 2017, net cash used in financing activities was $111,066 due to the payment of $96,966 for the repayment of the secured loan and $14,100 for capital lease payments

 

For the fiscal year ended March 31, 2016, net cash provided by financing activities was $300,000 from the sale of 2,069,965 shares of ADM $.0005 par value common stock offset by cash used by financing activities of $25,000 for bank loan repayment.

 

 

 
 

 

 

Inflation

 

We believe our operations have not been and, in the foreseeable future, will not be materially and adversely affected by inflation or changing prices. 

 

Off-Balance Sheet Arrangements

 

The Company has no off-balance sheet arrangements.

 

ITEM 7A. QUANTATATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

 

Not Applicable 

  

 ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

 
 

 

 

ADM TRONICS UNLIMITED, INC. AND SUBSIDIARY

MARCH 31, 2017 AND 2016

 

I N D E X

 

 

 

Page No.

 

 

Report of Independent Registered Public Accounting Firm

F-1

   
CONSOLIDATED FINANCIAL STATEMENTS:  

 

 

Consolidated Balance Sheets as of March 31, 2017 and 2016

F-2

 

 

Consolidated Statements of Income for the Years Ended March 31, 2017 and 2016

F-3

 

 

Consolidated Statements of Changes in Stockholders’ Equity (Deficiency) For the Years Ended March 31, 2017 and 2016

F-4

 

 

Consolidated Statements of Cash Flows for the Years Ended March 31, 2017 and 2016

F-5

 

 

Notes to Consolidated Financial Statements

F-6

 

 
 

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

To the Board of Directors and

Stockholders of ADM Tronics Unlimited, Inc.

Northvale, New Jersey

 

We have audited the accompanying consolidated balance sheets of ADM Tronics Unlimited, Inc. and subsidiary as of March 31, 2017 and 2016, and the related consolidated statements of income, changes in stockholders’ equity (deficiency), and cash flows for the years then ended. These consolidated financial statements are the responsibility of ADM Tronics Unlimited, Inc.'s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. The company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of ADM Tronics Unlimited, Inc. and subsidiary as of March 31, 2017 and 2016, and the results of their operations and their cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

 

/s/ Raich Ende Malter & Co. LLP

Melville, New York

June 29, 2017  

 

 

 
F-1

 

 

PART I. FINANCIAL INFORMATION

 

ITEM 1. CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

 

ADM TRONICS UNLIMITED, INC. AND SUBSIDIARY

CONSOLIDATED BALANCE SHEETS

 

   

March 31,

   

March 31,

 
   

2017

   

2016

 

ASSETS

               
                 

Current assets:

               

Cash and cash equivalents

  $ 1,982,276     $ 1,398,848  

Accounts receivable, net of allowance for doubtful accounts of $25,000 at March 31, 2017 and 2016

    862,619       588,875  

Inventories

    369,796       216,108  

Prepaid expenses and other current assets

    35,752       18,419  

Restricted cash

    -       233,050  
                 

Total current assets

    3,250,443       2,455,300  
                 

Property and equipment, net of accumulated depreciation of $32,562 and $77,690, at March 31, 2017 and 2016, respectively

    170,998       26,859  
                 

Inventories - long-term portion

    56,611       52,657  

Intangible assets, net of accumulated amortization of $9,244 and $155,062, at March 31, 2017 and 2016, respectively

    11,690       13,086  

Other assets

    104,907       17,644  

Deferred tax asset

    926,000       857,000  

Total other assets

    1,270,206       967,246  
                 

Total assets

  $ 4,520,649     $ 3,422,546  
                 

LIABILITIES AND STOCKHOLDERS' EQUITY

               
                 

Current liabilities:

               

Note payable - bank

  $ -     $ 96,966  

Capital lease payable

    30,895       -  

Accounts payable

    269,007       276,171  

Accrued expenses and other current liabilities

    148,731       331,231  

Customer deposits

    125,142       108,342  

Due to shareholder

    195,562       246,696  

Total current liabilities

    769,337       1,059,406  
                 

Long-term liabilities

               

Capital lease payable, net of current portion

    83,812       -  
                 
                 

Total liabilities

    853,149       1,059,406  
                 

Stockholders' equity:

               

Preferred stock, $.01 par value; 5,000,000 shares authorized, no shares issued and outstanding

    -       -  

Common stock, $0.0005 par value; 150,000,000 authorized, 67,588,492 and 67,008,492 shares issued and outstanding at March 31, 2017 and March 31, 2016, respectively

    33,794       33,504  

Additional paid-in capital

    33,294,069       33,195,759  

Accumulated deficit

    (29,660,363 )     (30,866,123 )

Total stockholders' equity

    3,667,500       2,363,140  
                 

Total liabilities and stockholders' equity

  $ 4,520,649     $ 3,422,546  

  

The accompanying notes are an integral part of these

consolidated financial statements.

 

 
F-2

 

  

ADM TRONICS UNLIMITED, INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF INCOME

FOR THE YEARS ENDED MARCH 31, 2017 AND 2016

 

   

2017

   

2016

 
                 

Net revenues

  $ 5,271,231     $ 4,513,070  
                 

Cost of revenues

    2,611,493       2,104,254  
                 

Gross Profit

    2,659,738       2,408,816  
                 

Operating expenses:

               

Research and development

    168,812       91,774  

Selling, general and administrative

    1,241,991       1,451,399  

Stock based compensation

    98,600       598,699  

Depreciation and amortization

    11,774       3,961  
                 

Total operating expenses

    1,521,177       2,145,833  
                 

Income from operations

    1,138,561       262,983  
                 

Other income (expense):

               

Interest income

    3,146       4,414  

Interest expense

    (4,947 )     (6,059 )

Total other income (expense)

    (1,801 )     (1,645 )
                 

Income before benefit from income taxes

    1,136,760       261,338  
                 

Benefit from income taxes - deferred

    69,000       857,000  
                 

Net income

  $ 1,205,760     $ 1,118,338  
                 

Basic and diluted net income per common share:

  $ 0.02     $ .02  
                 

Weighted average shares of common stock outstanding - basic

    67,145,150       66,284,930  
                 

Weighted average shares of common stock outstanding - diluted

    67,145,150       66,284,930  

  

The accompanying notes are an integral part of these

consolidated financial statements.

 

 

 
F-3

 

 

ADM TRONICS UNLIMITED, INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS' EQUITY (DEFICIENCY)

FOR THE YEARS ENDED MARCH 31, 2017 AND 2016

 

   

Common Stock

   

Common Stock

   

Additional

Paid-in

   

Accumulated

         
   

Shares

   

Amount

   

Capital

   

Deficit

   

Total

 
                                         

Balance at April 1, 2015

    64,939,537     $ 32,470     $ 32,298,094     $ (31,984,461 )   $ 346,103  
                                         

Net income

            -       -       1,118,338       1,118,338  
                                         

Stock based compensation

            -       598,699       -       598,699  
                                         

Advanced Plasma Therapies stock purchase

    2,068,955       1,034       298,966       -       300,000  
                                         
                                         

Balance at March 31, 2016

    67,008,492       33,504       33,195,759       (30,866,123 )     2,363,140  
                                         

Stock based compensation

    580,000       290       98,310       -       98,600  
                                         

Net income

            -       -       1,205,760       1,205,760  
                                         
                                         

Balance at March 31, 2017

    67,588,492     $ 33,794     $ 33,294,069     $ (29,660,363 )   $ 3,667,500  

  

The accompanying notes are an integral part of these

consolidated financial statements.

 

 
F-4

 

 

ADM TRONICS UNLIMITED, INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE YEARS ENDED MARCH 31, 2017 AND 2016

 

   

2017

   

2016

 

Cash flows from operating activities:

               

Net income

  $ 1,205,760     $ 1,118,338  

Adjustments to reconcile net income to net cash provided by operating activities:

               

Stock-based compensation

    98,600       598,699  

Depreciation and amortization

    17,538       5,015  

Write-off of inventories

    8,343       66,790  

Deferred income tax

    (69,000 )     (857,000 )

Increase (decrease) in cash flows as a result of changes in net assets and liabilities balances:

               

Accounts receivable

    (273,744 )     27,195  

Inventories

    (165,985 )     (109,594 )

Prepaid expenses and other current assets

    (104,596 )     (3,324 )

Accounts payable

    (7,164 )     (53,120 )

Customer deposit

    16,800       9,240  

Accrued expenses and other current liabilities

    (182,500 )     110,125  

Due to shareholder

    (51,134 )     22,847  

Net cash provided by operating activities

    492,918       935,211  
                 

Cash flows from investing activities:

               

Purchase of equipment

    (31,474 )     (27,233 )

Cash no longer restricted

    233,050       (525 )

Net cash provided by (used in) investing activities

    201,576       (27,758 )
                 

Cash flows from financing activities:

               

Repayments of notes payable

    (96,966 )     (25,000 )

Repayments of capital lease payable

    (14,100 )     -  

Sale of common stock

    -       300,000  
                 

Net cash provided by (used in) financing activities

    (111,066 )     275,000  
                 

Net increase in cash and cash equivalents

    583,428       1,182,453  
                 

Cash and cash equivalents - beginning of year

    1,398,848       216,395  
                 

Cash and cash equivalents - end of year

  $ 1,982,276     $ 1,398,848  
                 
                 

Cash paid for:

               

Interest

  $ 4,947     $ 2,599  
Taxes   $ 31,604     $ 1,000  
                 

Noncash Investing Activities:

               

Purchase of equipment with the assumption of capital lease

  $ 128,807     $ -  

  

The accompanying notes are an integral part of these

consolidated financial statements.

 

 
F-5

 

 

ADM TRONICS UNLIMITED, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

MARCH 31, 2017 AND 2016

 

NOTE 1 – NATURE OF BUSINESS

 

ADM Tronics Unlimited, Inc. ("we", "us", "the Company" or "ADM"), was incorporated under the laws of the state of Delaware on November 24, 1969. We are a manufacturing and engineering concern whose principal lines of business are the design, manufacture and sale of electronics of our own products or on a contract manufacturing basis; the production and sale of chemical and antistatic products; and, research, development and engineering services.

 

Electronic equipment is manufactured in accordance with customer specifications on a contract basis. Our electronic device product line consists principally of proprietary devices used in diagnostics and therapeutics of humans and animals and electronic controllers for spas and hot tubs. These products are sold to customers located principally in the United States. We are registered with the FDA as a contract manufacturing facility and we manufacture medical devices for customers in accordance with their designs and specifications. Our chemical product line is principally comprised of water-based chemical products used in the food packaging and converting industries, and anti-static conductive paints, coatings and other products. These products are sold to customers located in the United States, Australia, Asia and Europe. We also provide research, development, regulatory and engineering services to customers. Our Sonotron Medical Systems, Inc. subsidiary (“Sonotron”) is involved in medical electronic therapeutic technology.

  

NOTE 2 - SIGNIFICANT ACCOUNTING POLICIES

 

PRINCIPLES OF CONSOLIDATION

 

The consolidated financial statements include the accounts of ADM Tronics Unlimited, Inc. and its subsidiary Sonotron. All significant intercompany balances and transactions have been eliminated in consolidation.

 

USE OF ESTIMATES

 

These consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America and, accordingly, require management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities. Significant estimates made by management include expected economic life and value of our deferred tax assets, valuation allowance, impairment of long lived assets, fair value of equity instruments for services, allowance for doubtful accounts, and warranty reserves. Actual amounts could differ from those estimates.

 

FAIR VALUE OF FINANCIAL INSTRUMENTS

 

For certain of our financial instruments, including accounts receivable, accounts payable, accrued expenses, and notes payable – bank, the carrying amounts approximate fair value due to their relatively short maturities.

 

CASH AND CASH EQUIVALENTS

 

Cash equivalents are comprised of certain highly liquid investments with maturities of three months or less when purchased. We maintain our cash in bank deposit accounts, which at times, may exceed federally insured limits. We have not experienced any losses to date as a result of this policy. Cash and cash equivalents held in these accounts are currently insured by the Federal Deposit Insurance Corporation (“FDIC”) up to a maximum of $250,000. At March 31, 2017, approximately 1,659,000 exceeded the FDIC limit.

 

 

 
F-6

 

 

ACCOUNTS RECEIVABLE AND ALLOWANCE FOR DOUBTFUL ACCOUNTS

 

Accounts receivable are stated at the amount management expects to collect from outstanding balances. The carrying amounts of accounts receivable is reduced by a valuation allowance that reflects management's best estimate of the amounts that will not be collected. Management individually reviews all accounts receivable balances that exceed the due date and estimates the portion, if any, of the balance that will not be collected. Management provides for probable uncollectible amounts through a charge to expenses and a credit to a valuation allowance, based on its assessment of the current status of individual accounts. Balances that are still outstanding after management has used reasonable collection efforts are written off through a charge to the valuation allowance and a credit to accounts receivable. 

 

REVENUE RECOGNITION

 

ELECTRONICS:

 

We recognize revenue from the sale of our electronic products when they are shipped to the purchaser. We offer a limited 90-day warranty on our electronics products and a limited 5-year warranty on our electronic controllers for spas and hot tubs. We have no other post shipment obligations. Based on prior experience, no amounts have been accrued for potential warranty costs and actual costs were less than $2,000, for each of the fiscal years ended March 31, 2017 and 2016. For contract manufacturing, revenues are recognized after shipment of the completed products.

 

CHEMICAL PRODUCTS:

 

Revenues are recognized when products are shipped to end users. Shipments to distributors are recognized as revenue when no right of return exists.

 

ENGINEERING SERVICES:

 

We provide certain engineering services, including research, development, quality control and quality assurance services along with regulatory compliance services. We recognize revenue from engineering services as the services are provided.

 

WARRANTY LIABILITIES

 

The Company’s provision for estimated future warranty costs is based upon historical relationship of warranty claims to sales. Based upon historical experience, the Company has concluded that no warranty liability is required as of the consolidated balance sheet dates. However, the Company periodically reviews the adequacy of its product warranties and will record an accrued warranty reserve if necessary.

 

RESTRICTED CASH

 

Restricted cash represents funds on deposit with a financial institution that secures the bank note payable. The bank note payable was paid-off in 2017 and accordingly, there is no restricted cash.

 

INVENTORIES

 

Inventories are stated at the lower of cost (first-in, first-out method) or market. Inventories that are expected to be sold within one operating cycle (1 year) are classified as a current asset. Inventories that are not expected to be sold within 1 year, based on historical trends, are classified as Inventories - long term portion.

 

PROPERTY & EQUIPMENT

 

We record our property and equipment at historical cost. We expense maintenance and repairs as incurred. Depreciation is provided for by the straight-line method over five to seven years, the estimated useful lives of the property and equipment.

 

INTANGIBLE ASSETS

 

Intangible assets are reviewed for impairment whenever changes in circumstances indicate that the carrying amount may not be recoverable. In reviewing for impairment, the Company compares the carrying value of the relevant asset to the estimated undiscounted future cash flows expected from the use of the assets and their eventual disposition. When the estimated undiscounted future cash flows are less than their carrying amount, an impairment loss is recognized equal to the difference between the assets’ fair value and its carrying value.

  

 

 
F-7

 

 

ADVERTISING COSTS 

 

Advertising costs are expensed as incurred and amounted to $46,129 and $32,124 for the fiscal years ended March 31, 2017 and 2016, respectively.

  

SHIPPING AND HANDLING COSTS 

 

Shipping and handling costs incurred for the years ended March 31, 2017 and 2016 were approximately $6,092 and $11,831, respectively. Such costs are included in selling, general, and administrative expenses in the accompanying consolidated statements of income.

 

INCOME TAXES

 

We report the results of our operations as part of a consolidated Federal tax return with our subsidiary. Deferred income taxes result primarily from temporary differences between financial and tax reporting. Deferred tax assets and liabilities are determined based on the difference between the financial statement bases and tax bases of assets and liabilities using enacted tax rates. A valuation allowance is recorded to reduce a deferred tax asset to that portion that is expected to more likely than not be realized.

 

The Company has adopted the authoritative accounting guidance with respect to accounting for uncertainty in income taxes, which clarified the accounting and disclosures for uncertain tax positions related to income taxes recognized in the consolidated financial statements and addresses the determination of whether tax benefits claimed or expected to be claimed on a tax return should be recorded in the consolidated financial statements. The Company recognizes the financial statement benefit of a tax position only after determining that the relevant tax authority would more likely than not sustain the position following an audit. For tax positions meeting the more-likely-than-not threshold, the amount recognized in the consolidated financial statements is the largest benefit that has a greater than 50 percent likelihood of being realized upon ultimate settlement with the relevant tax authority.

 

The Company files income tax returns in several jurisdictions. The Company’s tax returns remain subject to examination, by major jurisdiction, for the years ended March 31, as follows:

 

Jurisdiction

Fiscal Year

Federal

2013 and beyond

New Jersey

2012 and beyond

 

There are currently no tax years under examination by any major tax jurisdictions.

 

The Company will recognize interest and penalties accrued on any unrecognized tax benefits as a component of income tax expense. As of March 31, 2017 and 2016, the Company has no accrued interest or penalties related to uncertain tax positions.

 

NET INCOME/LOSS PER SHARE

 

We compute basic income/loss per share by dividing net income/loss by the weighted average number of common shares outstanding. Diluted income/loss per share is computed similar to basic income/loss per share, except that the denominator is increased to include the number of additional common shares that would have been outstanding if the potential shares had been issued and if the additional shares were dilutive. Common equivalent shares are excluded from the computation of net income/loss per share if their effect is anti-dilutive.

 

Per share basic and diluted net income amounted to $0.02 and $0.02 for the fiscal years ended March 31, 2017 and 2016, respectively. 

 

 

 
F-8

 

 

RECLASSIFICATION

 

Certain items in the 2016 consolidated financial statements have been reclassified to conform to the current year presentation.

  

RECENT ACCOUNTING PRONOUNCEMENTS

 

In March 2016, the FSAB issued ASU 2016-09, “Improvement to Employee Share-Based Payment Accounting.” The new guidance will require entities to recognize all income tax effects of awards in the income statement when the awards vest or are settled. It also will allow an employer to repurchase more of an employee’s shares than it can today for tax withholding purposes without triggering liability accounting and to make a policy election to account for forfeitures as they occur. For public business entities, the guidance is effective for fiscal years beginning after December 15, 2016 and interim periods within those years. For all other entities, it is effective for fiscal years beginning December 15, 2017, and interim periods within fiscal years beginning after December 15, 2018. Early adoption is permitted, but all of the guidance must be adopted in the same period. The Company is still evaluating the potential impact on the Company’s financial statements.

 

On February 25, 2016, the Financial Accounting Standards Board (FASB) issued ASU 2016-2, “Leases” (Topic 842), which is intended to improve financial reporting for lease transactions. This ASU will require organizations that lease assets, such as real estate and manufacturing equipment, to recognize on assets and liabilities on their balance sheet for the rights to use those assets for the lease term and obligations to make lease payments created by those leases that have terms of greater than 12 months. The recognition, measurement, and presentation of expenses and cash flows arising from a lease by a lessee primarily will depend on its classification as finance or operating lease. This ASU will also require disclosures to help investors and other financial statement users better understand the amount and timing of cash flows arising from leases. These disclosures will include qualitative and quantitative requirements, providing additional information about the amounts recorded in the financial statements. This ASU will be effective for public entities beginning the first quarter 2019. We do not believe that this ASU will have a material impact on our financial statements.

 

In November 2015, the FASB issued ASU 2015-17, “Income Taxes, Balance Sheet Classifications of Deferred Taxes.” This amendment simplifies the presentation of deferred taxes by requiring that all deferred tax liabilities and assets now be recorded as noncurrent. This amendment is effective for interim and annual reporting periods beginning after December 15, 2016 with early adoption permissible. The Company adopted this amendment in March of 2017, which did not have any material impact on the Company’s results of operation.

  

In July 2015, the FASB issued ASU 2015-11, “Inventory. Simplifying the Measurement of Inventory.” This amendment only applies to entities that use the first-in, first-out (FIFO) or average cost methods of valuing inventory. Entities should now measure inventory at the lower of cost and net realizable value. This amendment aligns measurement of inventory in GAAP with the International Financial Reporting Standards (IFRS). This amendment is effective for annual periods beginning after December 15, 2016 with early adoption permitted. The Company will adopt this amendment in April of 2017. The Company does not believe that this amendment will have a material impact on their results of operation.

 

On May 14, 2014, FASB issued ASU 2015-14, “Revenue from Contracts with Customers,” which supersedes nearly all U.S. GAAP guidance on revenue recognition. The core principal of the standard is that revenue recognition should depict the transfer of goods and services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods and services. The new standard is effective for the Company for the fiscal year beginning April 1, 2018 and the effects of the standard on the Company’s consolidated financial statements are not known at this time.

 

Management does not believe that any other recently issued, but not yet effective accounting pronouncement, if adopted, would have a material effect on the accompanying consolidated financial statements. 

 

 

 
F-9

 

 

NOTE 3 - INVENTORIES

 

Inventories at March 31, 2017 consisted of the following:

 

   

Current

   

Long Term

   

Total

 

Raw materials

  $ 338,443     $ 56,611     $ 395,054  

Finished Goods

    31,353       -       31,353  
    $ 369,796     $ 56,611     $ 426,407  

 

Inventories at March 31, 2016 consisted of the following:

 

   

Current

   

Long Term

   

Total

 

Raw materials

  $ 187,333     $ 51,939     $ 239,272  

Finished Goods

    28,775       718       29,493  
    $ 216,108     $ 52,657     $ 268,765  

 

The Company values its inventories at the first in, first out ("FIFO") method at the lower of cost or market.

 

NOTE 4 - PROPERTY AND EQUIPMENT

 

Property and equipment as of March 31, 2017 and 2016 consisted of the following:

 

   

2017

   

2016

 

Computer equipment

  $ -     $ 13,364  

Machinery and equipment

    199,810       87,435  

Leasehold improvements

    3,750       3,750  
      203,560       104,549  
                 

Accumulated depreciation and amortization

    (32,562 )     (77,690 )
                 

Property and equipment, net

  $ 170,998     $ 26,859  

 

Depreciation and amortization expense related to property and equipment amounted to $16,142 and $3,620 for the years ended March 31, 2017 and 2016, respectively.     

 

 
F-10

 

  

NOTE 5 - INTANGIBLE ASSETS

 

Intangible assets are being amortized using the straight-line method over periods ranging from 3-15 years with a weighted average remaining life of approximately 4.13 years.

 

   

March 31, 2017

   

March 31, 2016

 
   

Cost

   

Weighted

Average

Amortization

Period

(years)

   

Accumulated

Amortization

   

Net

Carrying

Amount

   

Cost

   

Weighted

Average

Amortization

Period

(years)

   

Accumulated

Amortization

   

Net

Carrying

Amount

 

Patents & Trademarks

  $ 20,934       15     $ (9,244 )   $ 11,690     $ 82,702       15     $ (69,616 )   $ 13,086  

Formulas

                                    25,446       15       (25,446 )     -  
                                                                 

Non-Compete Agreement

                                    50,000       7       (50,000 )     -  

Customer List

                                    10,000       3       (10,000 )     -  
    $ 20,934             $ (9,244 )   $ 11,690     $ 168,148             $ (155,062 )   $ 13,086  

  

Amortization expense was $1,395 for each of the years ended March 31, 2017 and 2016.

 

Estimated aggregate future amortization expense related to intangible assets is as follows:

 

For the fiscal years ended March 31,

       

2018

  $ 1,395  

2019

    1,395  

2020

    1,395  

2021

    1,395  

Thereafter

    6,110  
    $ 11,690  

 

 
F-11

 

 

NOTE 6 – NOTE PAYABLE, BANK

 

On August 21, 2008, the Company entered into a note payable with a commercial bank in the amount of $200,000. This note bears interest at a rate of 2% above the interest rate for the Company’s savings account at this bank. Interest rate at March 31, 2016 was 2.15%. The note was secured by cash on deposit with the institution, which was classified as restricted cash. Amounts outstanding under the note were payable on demand, and interest is payable monthly. During the year ended March 31, 2017, the Note was paid-off and the restrictions were lifted from the cash account.

  

NOTE 7 – CAPITAL LEASES

 

During September 2016 the Company leased equipment with a cost of approximately $129,000, under provisions of various long-term capital leases whereby the minimum lease payments have been capitalized. Accumulated depreciation at March 31, 2017 is approximately $2,000. The leases expire over various years through 2021. Depreciation of the leased assets is included in depreciation and amortization expense. The lease obligations are secured by the leased assets.

 

Future minimum lease payments under the above capital leases, as of March 31, 2017, are approximately as follows:

 

For the Years Ending

March 31,

       

2018

  $ 35,000  

2019

    35,000  

2020

    35,000  

2021

    18,000  
      123,000  

Less: Amount attributable to imputed interest

    8,000  
         

Present value of minimum lease payments

    115,000  

Less: Current maturities

    31,000  
         
    $ 84,000  

 

NOTE 8 – CONCENTRATIONS   

 

During the year ended March 31, 2017, one customer accounted for 59% of our net revenues. As of March 31, 2017, one customer accounted for 83% of our accounts receivable.

 

During the year ended March 31, 2016, one customers accounted for 45% of our net revenues. As of March 31, 2016, one customer accounted for 43% of our accounts receivable.

 

The Company’s customer base is comprised of foreign and domestic entities with diverse demographics. Revenues from foreign customers represented $332,693 of net revenue or 6.3% of net revenue for the year ended March 31, 2017. Revenues from foreign customers represented $374,130 of net revenue or 8.3% for the year ended March 31, 2016.

 

NOTE 9 - SEGMENT INFORMATION

 

Information about segments is as follows: 

 

   

Chemical

   

Electronics

   

Engineering

   

Total

 

Year ended March 31, 2017

                               

Revenue from external customers

  $ 1,285,353     $ 1,820,490     $ 2,165,388     $ 5,271,231  

Segment operating income

  $ 216,371     $ 361,484     $ 560,706     $ 1,138,561  
                                 

Year ended March 31, 2016

                               

Revenue from external customers

  $ 1,412,179     $ 849,447     $ 2,251,444     $ 4,513,070  

Segment operating income

  $ 123,851     $ 41,473     $ 97,349     $ 262,983  
                                 
                                 

Total assets at March 31, 2017

  $ 1,110,111     $ 1,553,484     $ 1,857,054     $ 4,520,649  
                                 

Total assets at March 31, 2016

  $ 1,070,944     $ 644,189     $ 1,707,413     $ 3,422,546  

 

NOTE 10 - INCOME TAXES

 

At March 31, 2017, the Company had federal and state net operating loss carry-forwards, (NOL’s) of approximately $2,288,000, which are due to expire through fiscal 2033. These NOLs may be used to offset future taxable income through their respective expiration dates and thereby reduce or eliminate our federal and state income taxes otherwise payable. A valuation allowance is provided when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Ultimate utilization of such NOL’s and credits is dependent upon the Company’s ability to generate taxable income in future periods and may be significantly curtailed if a significant change in ownership occurs.

 

 
F-12

 

 

Significant components of deferred tax assets are as follows as of March 31, 2017 and 2016: 

 

   

2017

   

2016

 
                 

Deferred tax assets (liabilities):

               

Net operating loss carry-forward

  $ 915,000     $ 1,407,000  

Stock based compensation

    279,000       239,000  

Other

    11,000       11,000  

Deferred tax assets

    1,205,000       1,657,000  

Valuation allowance

    (279,000 )     (800,000 )
                 

Deferred tax asset, net

  $ 926,000     $ 857,000  

  

The change in the valuation allowance for the year ended March 31, 2016 decreased by $929,000.

 

The benefit from income taxes for the years ended at March 31, 2017 and 2016 differs from that amount using the statutory federal income tax rate as follows:

 

   

2017

   

2016

 
                 

Statutory federal income tax rate

    34

%

    34

%

Change in valuation allowance

    (40

%)

    (362

%)

Effective income tax rate

    (6

%)

    (328

%)

  

NOTE 11 - COMMITMENTS AND CONTINGENCIES

 

We lease our office and manufacturing facility under a non-cancelable operating lease, which expires on June 30, 2019. The Company’s future minimum lease commitment at March 31, 2017 is as follows:

 

For the years ended March 31,

 

Year

 

Per year

 

2018

  $ 104,625  

2019

  $ 26,156  
    $ 130,781  

 

Rent and real estate tax expense for all facilities for the years ended March 31, 2017 and 2016 was approximately $127,000 and $126,000, respectively.

 

NOTE 12 – STOCK BASED COMPENSATION

 

During 2013, ADM granted an aggregate of 5,600,000 stock options to employees and consultants expiring at various dates through March 2016. During 2014, 5,000,000 of the outstanding stock options were exercised.

 

 
F-13

 

 

On September 2, 2015, ADM granted an additional 3,000,000 stock options to employees at an exercise price of $0.20 per option and with a term of three years. The options were valued at $598,699 using the Black Scholes option pricing model with the following assumptions: risk free interest rate of 2.03%, volatility of 353%, estimated useful life of 3 years and dividend rate of 0%.

 

The following table summarizes information on all common share purchase options issued by us as of March 31, 2017 and 2016. 

 

   

2017

   

2016

 
   

# of Shares

   

Weighted

Average

Exercise

Price

   

# of Shares

   

Weighted

Average

Exercise

Price

 
                                 

Outstanding, beginning of year

    3,000,000     $ 0.20       600,000     $ 0.01  
                                 

Issued

    -     $ -       3,000,000     $ 0.20  
                                 

Exercised

    -     $ -       -     $ -  
                                 

Expired

    -     $ -       (600,000 )   $ (0.01 )
                                 

Outstanding, end of year

    3,000,000     $ 0.20       3,000,000     $ 0.20  
                                 

Exercisable, end of year

    3,000,000     $ 0.20       3,000,000     $ 0.20  

 

On October 26, 2016, ADM issued 290,000 shares of common stock at par value of $.0005 to two privately held companies for consulting and public relation services. On March 15, 2017, ADM issued an additional 290,000 shares at a par value of $.0005 to the same companies for additional services. During the year ended March 31, 2017, ADM issued a total of 580,000 shares of common stock. We estimated the value of these services to be $98,600 based on the quoted market price of a share of common stock on the date of issuance.

 

NOTE 13 - LEGAL PROCEEDINGS

 

None

 

NOTE 14 – SUBSEQUENT EVENTS

 

We evaluated all subsequent events from the date of the consolidated balance sheet through the issuance date of this report and determined that there are no events or transactions occurring during the subsequent event reporting period which require recognition or disclosure in the consolidated financial statements. 

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

 

None.

 

ITEM 9A. CONTROLS AND PROCEDURES

 

EVALUATION OF DISCLOSURE CONTROLS AND PROCEDURES.

 

We maintain disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d - 15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")) that are designed to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission's rules and forms, and that such information is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. Management necessarily applies its judgment in assessing the costs and benefits of such controls and procedures, which, by their nature, can provide only reasonable assurance regarding management's control objectives.

   

 

 
F-14

 

 

As of the end of the period covered by this Annual Report on Form 10-K, we carried out an evaluation, with the participation of management, including the Chief Executive Officer and Chief Financial Officer, of the effectiveness of our disclosure controls and procedures pursuant to Exchange Act Rule 13a-15. Based on that evaluation as of March 31, 2016, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) are effective.

 

MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

 

Management is responsible for establishing and maintaining effective internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) over our company. Internal control over financial reporting is a process to provide reasonable assurance regarding the reliability of our financial reporting for external purposes in accordance with accounting principles generally accepted in the United States. Because of its inherent limitations, internal control over financial reporting is not intended to provide absolute assurance that a misstatement of our financial statements would be prevented or detected.

 

Management, including our Chief Executive Officer and Chief Financial Officer, has evaluated our internal control over financial reporting as of March 31, 2017, based on the framework in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission. Based on its assessment, management has concluded that our internal control over financial reporting was not effective as of March 31, 2017.

 

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to temporary rules of the SEC that permit us to provide only management’s report in this annual report.

  

The determination that our disclosure controls and procedures were not effective as of March 31, 2016 are a result of:

 

a. Deficiencies in Internal Control Structure Environment. The Company experienced net losses for the past several years. During the current year, the Company’s focus was on expanding their customer base to initiate revenue production.  

 

b. Inadequate staffing and supervision within the accounting operations of our company. The relatively small number of employees who are responsible for accounting functions prevents the Company from segregating duties within its internal control system. The inadequate segregation of duties is a weakness because it could lead to the untimely identification and resolution of accounting and disclosure matters or could lead to a failure to perform timely and effective reviews.  The Company’s plan is to expand its accounting operations as the business of the Company expands.

 

The Company believes that the financial statements fairly present, in all material respects, the Company’s consolidated balance sheets as of March 31, 2017 and 2016 and the related consolidated statements of income, stockholders’ equity (deficiency), and cash flows for the years ended March 31, 2017 and 2016, in conformity with generally accepted accounting principles, notwithstanding the material weaknesses we identified.

 

INTERNAL CONTROL OVER FINANCIAL REPORTING.

 

There were no changes in the Company's internal control over financial reporting that occurred during the Company's last fiscal quarter of the fiscal year to which this report relates that have materially affected, or are reasonably likely to materially affect, the Company's internal control over financial reporting. 

 

ITEM 9B. OTHER INFORMATION

 

None.

 

PART III

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

 

The following table sets forth the name, position and age of the Company's sole executive officer and director. The Company's director serves until the next annual meeting of stockholders or until no successors is elected and qualified. Officers are elected by the board of directors and their terms of offices are, except to the extent governed by employment contracts, at the discretion of the board of directors.  

 

Name

Age

Position

Andre' DiMino

61

President, Chief Executive Officer

 

 

Chief Financial Officer, Director

 

 

 
 

 

  

Andre' DiMino has served as President of the Company since December 2001 and a director and Chief Financial Officer of the Company since 1987. Prior thereto, Mr. DiMino served as Executive Vice President and Chief Operating Officer since 1991 and Secretary and Treasurer of the Company since 1978. Mr. DiMino also served as the Technical Director of ADM Tronics from 1982 to 1991. Mr. DiMino served as Vice Chairman, Executive Vice President and Chief Technology officer of ITI from August 2008 to February 2010. He also served as Vice Chairman and Co-Chief Executive Officer of ITI from October 2006 to August 2008, and as Chairman and Chief Financial Officer from January 2004 until October 2006 and served as President of ITI from 1989 to January 2004. Since February 12, 2010, Mr. DiMino has served as Vice President-Engineering, Manufacturing and Regulatory for IHS. 

  

AUDIT COMMITTEE AND AUDIT COMMITTEE FINANCIAL EXPERT

 

Although the Company is engaged in ongoing efforts to engage qualified board members, the Company does not have a separately designated audit committee or compensation committee at this time. Accordingly, the Company's Board of Directors also has determined that the Company does not have an audit committee financial expert. The Company continues to seek new board members in order to appoint a separately designated audit committee. The functions which would be performed by an audit committee are performed by the Board of Directors as a whole.

 

DIRECTOR INDEPENDENCE

 

We currently do not have any independent directors.

 

SECTION 16(A) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE

 

Section 16(a) of the Exchange Act, and the rules and regulations of the Securities and Exchange Commission promulgated there under, requires the Company's directors, executive officers and persons who own beneficially more than 10% of the Company's common stock to file reports of ownership and changes in ownership of such stock with the SEC. Based solely upon a review of such reports, the Company believes that all of its directors, executive officers and 10% stockholders complied with all applicable Section 16(a) filing requirements during the Company's last fiscal year.

  

CODE OF ETHICS

 

The Company has adopted a code of ethics that applies to its principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions. A copy of such Code of Ethics has been filed as Exhibit 14.1 to the Annual Report on Form 10-KSB for the fiscal year ended March 31, 2005.

  

ITEM 11. EXECUTIVE COMPENSATION  

 

Name and Principal Position

Year

 

Salary

   

Bonus

   

Option

   

Other

   

Total

 
                     

Awards

   

Compensation

         

Andre' DiMino, Chief Executive Officer

2017

  $ 138,972     $ 13,897       -       -     $ 152,869  
                                           
 

2016

  $ 131,328     $ 13,132       -       -     $ 144,460  

 

EMPLOYMENT AGREEMENT

 

On January 10, 2013, we entered into an employment agreement with Andre’ DiMino to secure his continued service as President, and Chief Executive Officer (the “Employment Agreement”). The Employment Agreement has a ten-year term which will be automatically extended prior to the end of the then current term for successive one-year periods until either the Company or Mr. DiMino notifies the other at least 120 days prior to the end of the term that such party does not wish to further extend it. The Employment Agreement provides for a minimum annual salary of $125,000 and a fixed annual bonus equal to 10% of such annual salary, discretionary annual cash bonuses and participation on generally applicable terms and conditions in other compensation and fringe benefit plans. Mr. DiMino's employment agreement requires Mr. DiMino to devote at least a majority of his work-time toward the Company. The Employment Agreement provides that Mr. DiMino will be entitled to severance benefits in the amount of his base salary for a period of 12 months following the date of termination if his employment is terminated without cause or if he resigns for good reason, or 18 months following the date of termination if his employment is terminated without cause or if he resigns for good reason within 12 months following a change in control, in each case subject to the execution and delivery to the Company by Mr. DiMino of a general release.

 

 

 
 

 

 

During the term of the Employment Agreement and for a period of 12 months thereafter, subject to applicable law, Mr. DiMino will be subject to restrictions on competition with the Company and restrictions on the solicitation of the Company’s customers and employees. For all periods during and after the term, Mr. DiMino will be subject to nondisclosure and confidentiality restrictions relating to the Company’s confidential information and trade secrets and is obligated to assign all developments, related to the Company’s business, research and development activities, to the Company. 

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED

 

DIRECTORS' COMPENSATION

 

The Company does not pay fees to its directors, nor does it reimburse its directors for expenses incurred. 

 

STOCKHOLDER MATTERS: 

 

The following table sets forth information regarding ownership of shares of Company’s common stock, as of March 31, 2017, by (i) each person known to ADM to be the owner of 5% or more of ADM’s common stock (ii) each director and director nominee of ADM, (iii) the Named Officer, and (iv) all directors and officers of ADM as a group. Except as otherwise indicated, each person and each group shown in the table has sole voting and investment power with respect to the shares of the Company’s common stock indicated. For purposes of the table below, in accordance with Rule 13d-3 under the Securities Exchange Act of 1934, as amended, a person is deemed to be the beneficial owner, for purposes of any shares of Common Stock over which he or she has or shares, directly or indirectly, voting or investment power; or of which he or she has the right to acquire beneficial ownership at any time within 60 days after March 31, 2017. As used herein, “voting power” is the power to vote or direct the voting of shares and “investment power” includes the power to dispose or direct the disposition of shares. Common Stock beneficially owned and percentage ownership is based on 67,008,502 shares of Common Stock outstanding as of March 31, 2017. 

 

Name and Address

 

Number of

Shares

Beneficially

Owned

           

Percentage

 
                         

Andre' DiMino

    25,880,883       (1

)

    39

%

c/o ADM Tronics Unlimited, Inc.

                       

224 Pegasus Avenue

                       

Northvale, NJ 07647

                       
                         

Eugene Stricker

    4,188,700       (2

)

    6

%

c/o Fifth Avenue Venture Capital Partners

                       

42 Barrett Road

                       

Lawrence, NY 11559

                       
                         
                         
                         
                         
                         
                         

All Executive Officers and Directors as a group

    25,880,883       (3

)

    39

%

 


(1) Includes 18,691,223 shares of the Company’s common stock directly owned by Andre’ DiMino; 960 shares owned by Jenny DiMino, the spouse of Andre’ DiMino; 4,188,700 and 3,000,000 shares of the Company’s common stock held by Eugene Stricker, of which Andre’ DiMino may be deemed to be a beneficial owner by reason of his power to vote such shares pursuant to an agreement.

(2) Andre’ DiMino may be deemed to be a beneficial owner of such shares by reason of his power to vote such shares pursuant to an agreement. Reference is also made to Footnote No. 1.

(3) Reference is made to Footnote Nos. 1 and 2. 

 

 

 
 

 

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS

 

Voting Agreement

 

Andre' DiMino has a voting agreement with respect to 3,000,000 shares of the Company's common stock held by Eugene Stricker,

 

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

 

AUDIT FEES

 

The aggregate fees billed for professional services rendered by Raich Ende Malter & Co. LLP ("Raich") for the audit of the Company's annual consolidated financial statements for the fiscal years ended March 31, 2017 and 2016, and for the reviews of the financial statements included in the Company's Quarterly Reports on Form 10-Q for the fiscal years ended March 31, 2017 and 2016, were approximately $69,000 for each year.

 

AUDIT-RELATED FEES

 

The aggregate fees billed in each of the fiscal years ended March 31, 2017 and 2016 for assurance and related services by Raich that are reasonably related to the performance of the audit or review of the Company's financial statements and not reported above under “Audit Fees” were $0 for each year. 

  

TAX FEES 

 

The aggregate fees billed in each of the fiscal years ended March 31, 2017 and 2016 for professional services rendered by Raich for tax compliance, tax advice and tax planning were $10,000 for each year.

  

ALL OTHER FEES

 

The aggregate fees billed in each of the fiscal years ended March 31, 2017 and March 31, 2016 for products and services provided by Raich other than the services reported above under “Audit Fees”, “Audit Related Fees” and “Tax Fees” were $0.

  

AUDIT COMMITTEE ADMINISTRATION OF THE ENGAGEMENT

 

The Company does not have an audit committee. 

 

PART III, ITEM 15. EXHIBITS

 

Exhibit

 

No.

Description

 

 

3.1

Certificate of Incorporation and amendments thereto filed on August 9, 1976 and May 15, 1978 is incorporated by reference to Exhibit 3(a) to the Company's Registration Statement Form 10 (File No. 0-17629) (the "Form 10").

3.2

Certificate of Amendment to Certificate of Incorporation filed December 9, 1996 is incorporated by reference to Exhibit 3(a) to the Company's Annual Report on Form 10-KSB for the fiscal year ended March 31, 1997.

3.3

By-Laws are incorporated by reference to Exhibit 3(b) to the Form 10.

10.1

Memorandum of Lease by and between the Company and Cresskill Industrial Park III dated as of August 26, 1993 is hereby incorporated by reference to Exhibit 10(a) to the Company's Annual Report on Form 10-KSB for the fiscal year March 31, 1994.

10.5

Agreement of January 17, 2003 by and between the Company and Fifth Avenue Venture Capital Partners is hereby incorporated by reference to Exhibit 10.5 to the Company's Annual Report on Form 10-KSB for the fiscal year ended March 31, 2003.

10.6

Amended and Restated Manufacturing Agreement, dated February 10, 2005, among the Company, Ivivi Technologies, Inc. and Sonotron Medical Systems, Inc. is incorporated by reference to the Company's Annual Report on Form 10-KSB for the fiscal year ended March 31, 2005.

10.7

Management Services Agreement, dated August 15, 2001, among the Company, Ivivi Technologies, Inc., Sonotron Medical Systems, Inc. and Pegasus Laboratories, Inc., as amended is incorporated by reference to the Company's Annual Report on Form 10-KSB form the fiscal year ended March 31, 2005.

10.8*

Master Services Agreement dated February 12, 2010 by and between ADM Tronics Unlimited Inc. and Ivivi Health Sciences LLC.

 

 

 
 

 

 

* Filed as an exhibit to the Company's annual report on Form 10K, as filed with the SEC on June 29, 2010, and incorporated herein by this reference. 

 

14.1

Code of Ethics is incorporated by reference to the Company's Annual Report on Form 10-KSB for the fiscal year ended March 31, 2005.

21.1

Subsidiaries of the Company.

31.1

Certification of the Chief Executive Officer and Chief Financial Officer of the Company pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1

Certification of the Chief Executive Officer and Chief Financial Officer of the Company pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

101.INS**

XBRL Instance

101.SCH**

XBRL Taxonomy Extension Schema

101.CAL**

XBRL Taxonomy Extension Calculation

101.DEF**

XBRL Taxonomy Extension Definition

101.LAB**

XBRL Taxonomy Extension Labels

101.PRE**

XBRL Taxonomy Extension Presentation

  

** XBRL information is furnished and not filed or a part of a registration statement or prospectus for purposes of sections 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of section 18 of the Securities Exchange Act of 1934, as amended, and otherwise is not subject to liability under these sections.

 

  

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized this 29th day of June, 2017.

 

 

 

ADM TRONICS UNLIMITED, INC.

 

 

 

 

 

 

By:

/s/ Andre' DiMino

 

 

 

Andre' Di Mino

 

 

 

Chief Executive Officer

 

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.  

 

 

 

 

Title

 

Date

 

 

 

 

 

 

/s/

Andre' DiMino

 

Chief Executive Officer (Principal

 

June 29, 2017

 

Andre' DiMino

 

Executive Officer, Principal

 

 

 

 

 

Financial Officer and Principal

 

 

 

 

 

Accounting Officer) and Director