UNITED STATES SECURITIES AND EXCHANGE COMMISSION 

Washington, D.C. 20549

Form 10-K





☑ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 For the fiscal year ended December 31, 2020

 or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from       to      



Commission file number 001-15751

 

eMAGIN CORPORATION 

(Exact name of registrant as specified in its charter) 





700 South Drive,  Suite 201,  Hopewell Junction,  NY 12533

(Address of principal executive offices) 

 

(845)  838-7900 

(Registrant’s telephone number, including area code) 

 

Securities registered pursuant to Section 12(b) of the Act:





Securities registered pursuant to Section 12(g) of the Act: None

 

Indicate by check mark whether the registrant is a well-known seasoned issuer as defined in Rule 405 of the Securities Act.   Yes ☐    No ☑



Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.   Yes ☐    No ☑



Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   Yes ☑    No ☐



Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).   Yes ☑    No ☐



Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company.  See definition of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.   





If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐



Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Exchange Act)   Yes  ☐    No ☑



As of June 30, 2020, the last business day of the registrant’s most recently completed second quarter, the aggregate market value of the issued and outstanding common stock held by non-affiliates of the registrant, based upon the closing price of the common stock as traded on the NYSE American of $0.79 was approximately $39.4 million. For purposes of the above statement only, all directors, executive officers, and 10% shareholders are assumed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for any other purpose.



The number of shares of common stock outstanding as of March 8, 2021 was 71,119,183.





DOCUMENTS INCORPORATED BY REFERENCE

The information required by Part III of this Report, to the extent not set forth herein, is incorporated herein by reference from the registrant’s definitive proxy statement relating to the Annual Meeting of Stockholders to be held in 2021, which definitive proxy statement shall be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year to which this Report relates.



 



---

 



Table of Contents

 



 

---

 

STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

 

This Annual Report on Form 10-K, or Report, contains forward-looking statements that are based on our management’s belief and assumptions and on information currently available to our management. Although we believe that the expectations reflected in these forward-looking statements are reasonable, these statements relate to future events or our future financial performance, and involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements.



In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “expects,” “intends,” “plans,” “anticipates,” “believes,” “estimates,” “predicts,” “potential,” “continue” or the negative of these terms or other comparable terminology. These statements are only predictions. You should not place undue reliance on forward-looking statements because they involve known and unknown risks, uncertainties and other factors, which are, in some cases, beyond our control and which could materially affect our results. Factors that may cause actual results to differ materially from current expectations include, among other things, those listed in the section entitled “Risk Factors” and elsewhere in this Report. If one or more of these risks or uncertainties occur, or if our underlying assumptions prove to be incorrect, actual events or results may vary significantly from those implied or projected by the forward-looking statements. No forward-looking statement is a guarantee of future performance. You should read this Report and the documents that we reference in this Report and have filed with the Securities and Exchange Commission, or the SEC, as exhibits to this Report, completely and with the understanding that our actual future results may be materially different from any future results expressed or implied by these forward-looking statements.



In particular, forward-looking statements in this Report include statements about:





The forward-looking statements in this Report represent our views as of the date of this Report. We anticipate that subsequent events and developments may cause our views to change. However, while we may elect to update these forward-looking statements at some point in the

---

 

future, we have no current intention of doing so except to the extent required by applicable law. Therefore, these forward-looking statements do not represent our views as of any date other than the date of this Report.



In this Report, references to “eMagin Corporation,” “eMagin,”, “we,” “us,” and “our company” refer to eMagin Corporation and our wholly owned subsidiary, Virtual Vision, Inc. References to “Consumer Night Vision Business” refers to our consumer night vision products business.



eMagin® is a registered trademark of eMagin Corporation. dPdTM is an unregistered trademark of eMagin.  All other trademarks used in this Annual Report are the property of their respective owners.



Summary of Risk Factors



We are providing the following summary of the risk factors contained in this Annual Report on Form 10-K to enhance the readability and accessibility of our risk factor disclosures. We encourage you to carefully review the full risk factors contained in this Annual Report on Form 10-K in their entirety for additional information regarding the material factors that make an investment in our securities speculative or risky. These risks and uncertainties include, but are not limited to, the following:



Risks related to our financial position, including risks relating to:





Risks related to our business and industry, including risks relating to:





Risks related to ownership of our common stock, including risks related to:





Risks related to our indebtedness, including risks relating to:



---

 



Risks related to our intellectual property, including risks related to: 





Risks related to governmental, legal or regulatory matters, including risks related to:





Risks related to Information Technology, including risks related to:





General risks, including risks relating to:



---

 

PART I

 

ITEM 1. BUSINESS



Introduction



We design, develop, manufacture and market organic light emitting diode, or OLED miniature displays, which we refer to as OLED-on-silicon microdisplays, virtual imaging products that utilize OLED microdisplays, and related products. We also perform research in the OLED field. Our virtual imaging products integrate OLED technology with silicon chips to produce high-resolution microdisplays which, when viewed through a magnifying headset, create virtual images that appear comparable in size to that of a computer monitor or a large-screen television. Our products enable our original equipment manufacturer, or OEM, customers in the military, commercial and medical markets to develop and market improved or new electronic products.



We believe that our OLED microdisplays offer a number of significant advantages over comparable liquid crystal microdisplays, including higher contrast, greater power efficiency, less weight, more compact size, and negligible image smearing. Using our active matrix OLED technology, many computer and electronic system functions can be built directly into the OLED microdisplay silicon backplane, resulting in compact, high resolution and power efficient systems. Already proven in military and commercial systems, our product portfolio of differentiated OLED microdisplays deliver high-resolution, virtual images that perform effectively even in extreme temperatures and high-vibration conditions.



Our OEM customers incorporate our OLED displays in a variety of products including, military aviation helmets, military weapons sights and targeting systems, night vision and thermal imaging devices, training and simulation, visualization for ocular surgery, mobile ultrasound, and augmented reality applications.



We believe our technology, intellectual property portfolio and position in the marketplace give us a leadership position in OLED and OLED-on-silicon microdisplay technology. We have an intellectual property portfolio that includes 41 U.S. patents and 16 pending U.S. patents, and have over 24 years of manufacturing know-how and other proprietary technologies to create our high-performance OLED microdisplays. We also have 5 issued foreign patents and 24 foreign filings. We believe that we are one of only a few companies to market and produce significant quantities of high resolution, small molecule OLED-on-silicon microdisplays.



We also believe that our direct patterning, or dPd technology, which we introduced during 2018, gives us an advantage over other OLED microdisplays because it allows us to produce microdisplays with the high brightness required for VR and AR and certain military applications. Traditional OLED microdisplays utilize white emitting OLED with color filters that lessen the intensity of emitted light by as much as 80%, significantly reducing brightness. Microdisplays manufactured by dPd process technology do not require color filters to achieve color variations and allow for the application of more efficient OLED structures which achieve higher brightness. dPd also allows for much lower power and longer life when run at the same luminance of a color filter display.



We derive the majority of our revenue from sales of our OLED microdisplay products. We also earn revenue from commercial, consumer product and government development contracts that may complement and support our internal research and development programs. In addition, we generate sales from optics and microdisplays combined with optics. And finally, as the technology leader in this space, we may see future opportunities to license technologies like dPd to OEMs and other global manufacturers.



We were formed in March 2000, through the merger of Fashion Dynamics Corporation, and FED Corporation, a developer and manufacturer of optical systems and microdisplays for use in the electronics industry. Simultaneous with this merger, we changed our name to eMagin Corporation. We are incorporated in the state of Delaware. 



Our common stock is traded on the NYSE American under the symbol EMAN.



Our Industry



A microdisplay generally has a screen size that is less than two inches in diagonal. The miniature size enables microdisplays to be used in a wide variety of applications that require a screen that takes up small space, such as head‑mounted displays or HMDs, weapon sights, and viewfinders of digital cameras. Microdisplays are used across various industries, including the military, commercial, and consumer markets in which we operate. Microdisplays provide many advantages over other displays where small size is a requirement. Benefits include compact size, high brightness and resolution, low power consumption, and high contrast.



---

 

Our Technology Platform



Our microdisplays are based upon active matrix small molecule OLED technology, which we refer to as active matrix OLED or AMOLED. Our AMOLED technology permits us to build millions of individual low‑voltage light sources on low‑cost, silicon computer chips to produce single color, white or full‑color display arrays. Our technology allows many computer and video electronic system functions to be built directly into the silicon chip, under the OLED film, resulting in a compact, integrated system with lower overall system costs relative to alternative technologies.



OLEDs are thin films of stable organic materials that emit light of various colors when a voltage is applied to them. OLEDs are emissive devices, which mean that they create their own light, as opposed to liquid crystal displays, which require a separate light source. As a result, our OLED microdisplays use less power and deliver much higher contrast and fuller color than liquid crystal microdisplays. Unlike liquid crystal displays which use crossed polarizers to generate black level, OLED displays exhibit an extremely high contrast ratio which results in very vivid images. Because the light they emit is lambertian, which means that it appears equally bright from most forward directions, a moderate movement in the eye does not change the image brightness or color as it does in other technologies.



Our technology is based on integrating a proprietary OLED device with a specially designed silicon backplane to produce efficient and high-performance AMOLED microdisplays. Our OLED displays incorporate a proprietary, top‑emitting structure for our OLED devices that enables OLED displays to be built on opaque silicon integrated circuits rather than only on glass. Our OLED microdisplays emit full visible spectrum (white) light that is isolated with color filters to create color images. Our microdisplays’ performance meets or exceeds the requirements for a typical notebook computer or cell phone and is useful for a myriad of applications. New processes and device improvements, such as our OLED‑XLS and OLED-XLE technologies, offer even better performance including brightness and efficiency.



We have developed extremely bright OLED microdisplays using our patented dPd technology and have demonstrated color high resolution 2K x 2K and widescreen ultra-extended graphics array, or WUXGA, microdisplays with brightness in excess of 7,500 nits, which we believe is the world’s highest resolution and brightness. In addition to our AMOLED technology, we have developed compact optic and lens enhancements, which when coupled with the microdisplay, help our OEM customers provide a high-quality large screen appearance.



We believe that our AMOLED technology provides significant advantages over other microdisplay technologies in our targeted markets. These key advantages include:





Our Market Opportunities



We target the military, commercial (in which we include the medical and industrial sectors), and consumer markets with many of our products catering to multiple markets. Within each of these market sectors we believe that our OLED microdisplays, when combined with compact optic lenses, can become a key component for a variety of mobile electronic products.



Military



We believe eMagin is the only U.S. manufacturer of OLED microdisplays. We believe that head‑mounted systems incorporating our high brightness OLED microdisplays increase the user’s effectiveness by allowing hands‑free operation and increased situational awareness with sufficient brightness for use in daylight, yet dimmable for nighttime light security. OLED microdisplays possess performance characteristics important to demanding military and commercial (e.g., industrial) applications, including high contrast, wide dimming range, shock and vibration resistance, and insensitivity to high G‑forces. The design features and performance characteristics of our OLED microdisplays reduce the size, weight, and power required by current and future military systems, while also providing a wide operating temperature range. The image does not flicker or have color breakup in vibrating environments and the microdisplay’s wide viewing angle allows ease of viewing for long periods. Most important, our OLED’s low power consumption reduces battery weight and, for military applications, reduces constraints on mission length due to battery life. The OLED’s wide operating temperature range is of special interest for military applications because the display can turn on instantly at temperatures far below freezing and can operate at high temperatures such as in desert conditions. We believe that our microdisplay products provide power advantages over other microdisplay technologies, particularly liquid crystal displays which require backlights and heaters and

---

 

cannot provide instant‑on capabilities at low temperatures. Incorporating OLED microdisplays into aviation helmets has been made possible in part by the high brightness, high contrast and other performance features of the OLED technology that we have developed.



Our products’ military applications primarily fall into three broad areas: (1) helmet‑mounted and handheld displays for situational awareness and data; (2) night vision/thermal imaging goggles, weapons sights, and handheld viewers; and (3) training and simulation devices. These systems are also well suited for demanding operations including; homeland defense, fire and rescue and urban security.



Situational Awareness.  Our OLED microdisplays have been incorporated into a broad range of U.S. and foreign military situational awareness programs. Situational awareness products include head‑mounted displays that are used to display images, including digital map, sensor imagery and pilot aviation information. In addition, handheld imagers provide improved situational awareness on the battlefield, as well as in training and simulation. These products can also be combined with a weapon system to give the user the capability to select targets without direct exposure. During 2020, we continued to develop and test displays under a program with Collins Aerospace to support the F-35 Lightning II helmet mounted display systems. These custom designed displays are a key component in providing superior contrast without the backlight glow that is inherent to LCD displays.  We will continue to support Collins Aerospace in 2021 as they further improve the display and take the product through qualification and deployment.



Night Vision/Thermal Imaging.  Night vision goggles allow the user to see in low light conditions. Most versions include two different technologies: infrared/thermal and image intensification. Third and fourth generation military devices generally use some combination of the two technologies. Thermal imagers detect infrared energy (heat) and convert it into an electronic signal. The resulting signal needs to be presented on a display. Heat sensed by an infrared camera can be very precisely quantified, or measured, allowing the user to not only monitor thermal performance, but also identify and evaluate the relative severity of heat‑related problems. Thermal imaging systems can be stand‑alone handheld systems or integrated as part of the aiming mechanism for a larger system. Advances in sensor technology, both in sensitivity and resolution as well as economic efficiency, have been the driving factors in the adoption of thermal technologies for military applications. We believe the power efficiency and environmental ruggedness of our products are strong competitive advantages, particularly for smaller handheld non‑cooled systems. Fielded products incorporating our OLED microdisplays include Enhanced Night Vision Goggle II, the Enhanced Night Vision Goggle III, the Enhanced Night Vision Binocular, Javelin CLU medium‑range anti‑tank missile system, Laser Targeting Locator Modules, handheld and clip on thermal imagers.



Training and Simulation.  Our OLED microdisplays are purchased by OEMs for use with their simulation and training products. Our displays have been commercialized and prototyped for situational awareness and night vision/thermal imaging applications by military systems integrators.



Commercial



We believe that a wide variety of commercial markets (in which we include the medical and industrial sectors) offer significant opportunities for our products due to increasing demand for instant data accessibility in mobile workplace environments and the benefit of mobile displays to enhance visual performance. This market includes night and thermal imaging systems for law enforcement and first responders. Examples of existing and potential microdisplay applications include enhanced visualization for ocular surgery, mobile ultrasound, mobile nondestructive testing, enhanced vision for those with visual impairments, immediate access to inventory records or maintenance and construction manuals, routine quality assurance inspection, and real‑time viewing of images and data for a variety of applications. As an example, a user wearing an HMD while operating test equipment, such as an oscilloscope, can view technical data while simultaneously probing printed circuit boards. Current commercial products equipped with our OLED microdisplays in these sectors include those produced by Alcon, Abbott Laboratories, IMV (formerly BCF), Liteye, Trijicon, FLIR Systems, Nordic NeuroLab, and VRmagic.



Consumer



We believe a major driver of the longer term near‑eye virtual imaging microdisplay market is the growing consumer demand for mobile access to larger volumes of information and entertainment in smaller and more affordable packages. This desire for mobility has resulted in the development of mobile video personal viewer products in three general categories:





When we are able to manufacture our OLED displays in higher volumes at reduced costs and capitalize on our dPd technology, we believe that our products will be increasingly well positioned to compete with other microdisplays and cell phone size displays in the rapidly growing consumer market, particularly as demand expands for sophisticated mobile personal viewers offering higher resolution and better image quality for VR and AR applications. Users of VR HMDs are demanding a fully immersive experience. We believe our dPd technology addresses the critical performance parameters for next generation VR HMDs, including higher brightness, sharper resolution, lower power consumption, elimination of motion artifacts, and longer life. Our strategy for addressing the consumer mass market includes developing partnerships with both tier-one consumer companies and high-volume production manufacturing companies.

---

 



Potential applications for these personal viewers include handheld personal computers and mobile devices, such as smartphones, whose small, direct view screens limit the amount of information that can be displayed but which are now capable of running more complex software applications. Examples encompass applications where hands‑free viewing is desired such as entertainment and gaming video headset systems; nighttime or thermal imaging devices for hunting, camping, and other outdoor activities; and maintenance applications. In addition, in late 2015, we entered into a HMD technology licensing agreement with a tier-one consumer electronics company which includes the use of our 2K × 2K displays in its consumer headsets. In first quarter 2017, we entered into an agreement with a tier-one company interested in incorporating our proprietary dPd technology into potential headset products. Also during first quarter 2017, we performed tests for a tier-one consumer electronics company demonstrating our dPd technology as a path for AR and VR. We also entered into agreements with tier-one companies to develop a new display design for Virtual Reality and scale our dPd technology. During 2018, we designed a silicon backplane for this 4K design which is anticipated to have a 100-degree field of view. In late 2018 we received the first silicon wafers based on our 4K design from a foundry, and began testing and applying OLED materials to the wafers in furtherance, of our development efforts. During 2019, we demonstrated a 4K display at a major industry conference. During 2020, we entered into an agreement with another tier-one consumer company to design a display.



Our Products



Our first commercial microdisplay, the super video graphics array, or SVGA+, OLED, was introduced in 2001. In 2008, we introduced engineering samples of our super extended graphics array, or SXGA, 120 OLED microdisplays and began selling significant quantities of the product in 2010. In late 2011, we began selling pre‑production samples of our WUXGA OLED microdisplay which is now qualified and in production. In 2014, we released our Digital SVGA, and in 2015, we released our smaller pixel pitch digital SXGA and SXGA096, as well as an upgrade to the SXGA120 and WUXGA. Our OLED display products are being designed in products to be manufactured by OEM customers for a wide variety of military, commercial, and consumer applications. We offer our products to OEMs and other buyers as both separate components, integrated bundles coupled with our own optics, or complete systems. We also offer engineering support to enable customers to integrate our products into their own product development programs and design customized displays with resolutions or features to meet specific customer requirements. In 2015, we announced the development of a prototype immersive headset that uses our prototype 2K × 2K display. During 2016, we demonstrated what we believe to be the world’s highest brightness (~4,500 cd/m2) and highest resolution (1920x1200 pixels) microdisplay using our proprietary dPd technology. During 2017, we developed prototype displays of our 2K x 2K display with an advanced backplane design and brightness exceeding 5,000 cd/m2. During 2018, we continued to make improvements in the features and brightness of our displays and achieved over 7,500 nits in our WUXGA displays. We have shipped sample high brightness displays fabricated using our dPd technology to numerous customers. During 2019, we shipped our dPd tool to the vendor for upgrading to enable better performance and yield. Following the upgrade, we received the tool back from the vendor and began fabricating dPd prototypes during the second half of 2020 and have sent samples to customers for evaluation.



SVGA+ OLED Microdisplay Series (Super Video Graphics Array of 852x600)



The SVGA+ OLED Microdisplay Series is a 0.62 inch diagonal microdisplay that has a resolution of 852x600 triad pixels (1.53 million picture elements). The display also has an internal monochrome video decoder for low power night vision systems. The SVGA+ Rev3 OLED‑XL microdisplay is a power efficient OLED display solution for near‑eye personal viewer applications which uses less than 115 mW power in monochrome for thermal imaging applications, and lower than 175 mW at 200 cd/m2 for full color video.



Digital SVGA OLED‑XL



The Digital SVGA or DSVGA OLED‑XL is an 800 × 600 display with 15 micron pixels and a 0.6 inch diagonal. It has all the benefits of our other digital displays, including lower power (100 mW monochrome and 135 mW color), high (10,000 to 1) contrast, and also features a digital composite signal interface, enabling a minimal physical interface for color applications.



SXGA096 OLED‑XL/XLS (Super eXtended Graphics Array, 1280 x 1024)



The SXGA096 display features a 9.6‑micron color pixel and was designed with the same level of feature integration as the DSVGA microdisplay, as well as a low pin‑count, high speed low voltage differential signaling, or LVDS, data interface. The compactness and high information content of the SXGA096 makes it ideal for small form factor applications such as commercial headsets and smart weapon sights. This microdisplay incorporates OLED XLS technology more than doubling the OLED XL brightness. This expands the range of optical solutions that can be used with this display to result in smaller and lighter display modules.



SXGA OLED‑XL (Super eXtended Graphics Array, 1280 x 1024)



Our SXGA OLED microdisplay with a 0.77 inch diagonal active area provides 3,932,160 sub‑pixels in an active area. The display’s pixel array comprises triads of vertical sub‑pixels stacked side by side to make up each 12 × 12mm color pixel. The SXGA OLED‑XL microdisplay offers digital signal processing, requiring less than 200mW under typical operation. The supported video formats are SXGA, 720p, DVGA (through 1280 × 960 pixel doubling), and both frame sequential and field sequential stereovision.

---

 



VGA OLED‑XL (Video Graphics Array, 640 x 480)



The VGA OLED‑XL microdisplay is our smallest (0.5 inches) and lowest powered (<60 mW monochrome/<100 mW color). The VGA OLED‑XL utilizes the same voltage pixel drive architecture and “deep black” technology as the SXGA and WUXGA designs and includes motion artifact reduction technology like the WUXGA. Also like the SXGA and WUXGA, the VGA provides a FPGA driver design for maximum flexibility and versatility. The VGA interface is 30‑bit digital RGB.



WUXGA OLED‑XL (Widescreen Ultra eXtended Graphics Array, 1920 x 1200)



Our WUXGA OLED‑XL microdisplay provides higher resolution than most high definition, or HD, flat screen televisions. With a triad sub‑pixel structure this display is built of 7,138,360 active dots at 3.2 microns each. The WUXGA OLED‑XL is built upon the voltage pixel drive approach first developed for the SXGA OLED‑XL, which provides improved uniformity, ultra‑high contrast (measured at greater than 100,000:1) and lower power. The advanced WUXGA design features our proprietary “deep black” architecture that ensures that off‑pixels are truly black, automatically optimizes contrast under all conditions, and delivers better pixel to pixel uniformity. The WUXGA OLED‑XL includes a low‑power LVDS, serial interface and the overall display power requirement is typically less than 350 mW running standard video. Also included is our proprietary motion enhancement technology which smooths video display and virtually eliminates unwanted artifacts. Like the SXGA, the WUXGA provides a FPGA driver design available on a separate, lower power driver board, or as source code for integration into end product electronics giving OEM developers maximum versatility and flexibility. On‑board circuitry ensures consistent color and brightness over a wide range of operating temperatures.



Design Reference Kits



We provide design reference kits, which include a microdisplay and associated electronics, to help OEMs evaluate our microdisplay products and to assist their efforts to build and test new products incorporating our microdisplays.



Integrated Modules



We provide near‑eye virtual imaging modules that incorporate our OLED‑on‑silicon microdisplays with our lenses and electronic interfaces for integration into OEM products. We have shipped customized modules to several customers, some of which have incorporated our products into their own commercial products.



Prism Optics



We sell a high quality, large viewing angle prism optics with a wide range for eye positioning which is essential for incorporating our displays in immersive near‑eye systems. This is an advanced molded plastic prism lens that permits our AMOLED microdisplays to provide realistic images that can be viewed for extended periods with reduced eye‑fatigue.



Drive Boards



Through an agreement with Bild Innovative Technology we offer its line of OLED microdisplay compact driver boards to eMagin customers. Under this arrangement, customers now have the option of purchasing eMagin OLED microdisplays together with compact drive boards, thereby streamlining their prototyping efforts.  The initial boards available from eMagin will be for SXGA096, SXGA120, and DSVGA resolutions, with more to be added in the future.



Government Contract Revenues and Government Awards

We derive a portion of our revenue from funding that we receive pursuant to research contracts or subcontracts funded by various agencies of the U.S. government. In addition we have applied for and received U.S. government awards for the purchase of capital equipment.



In June 2020, we announced a $5.5 million award received under the U.S. Department of Defense Industrial Base Analysis, or IBAS, Program for OLED Supply Chain Assurance. In July 2020, we announced a $33.6 million award the U.S. Department of Defense to sustain and enhance U.S. domestic capability for high resolution, high brightness OLED microdisplays that will include equipment to manufacture our dPd displays. These funds will be used to purchase capital equipment over a 33 month period that will increase capacity, improve yields, and sustain operations at our Hopewell Junction, New York headquarters.  



During 2020, we made progress towards our goals of securing new U.S. military programs, broadening our presence in foreign military applications, we continue to participate in discussions with the U.S. government on microdisplay development for future defense aviation/mounted/dismounted programs and to position our displays as a key component of the future Soldier System 2030 technology suite for enhanced soldier performance and accelerated decision-making.



---

 

We earn revenue from contracts with the U.S. government, either directly or funded through contractors that require us to conduct the research effort described in the statement of work section of the contract. These contracts may be modified or terminated at the discretion of the government and are subject to authorization, appropriation and allocation of the required funding on an annual basis.



Commercial Contract Funding



We also derive a portion of our revenue from funding we receive from customers in both the military and commercial sectors. During 2020, our efforts towards consumer AR/VR applications continued. We were also awarded several contracts to fund our efforts to improve production yields and OLED device performance.



Our Strategy



Our strategy is to strengthen our technology leadership position and our expertise in active matrix OLED technology and silicon wafer design, including our dPd technology. We believe we are the only U.S. OLED microdisplay manufacturer and can capitalize on our experience by supplying microdisplays and virtual imaging technology solutions for applications in military, commercial, and consumer markets, globally.   



We plan to continue our participation in U.S. government funded, and commercial contract research and development programs, which allow us to continue to advance our technology. We aim to provide microdisplays and complementary accessories to enable OEM customers serving a variety of markets, including military and commercial and consumer to develop and manufacture new and enhanced electronic products. The key elements of our strategy to achieve these objectives include:



 













Sales and Marketing



We primarily provide our OLED display and optics components to OEMs to incorporate into their branded products and sell through their own well‑established distribution channels. We have traditionally marketed and sold our products to customers through targeted selling, promotions, and select advertising. We identify companies with end products and applications for which we believe our products will provide a key differentiator. Marketing efforts focus on identifying prospects and communicating the product performance attributes foremost in the minds of purchasing decision‑makers. We believe that this approach positions us to achieve the highest possible return on investment for our marketing expense.



We market our products in North America, Asia, and Europe directly from our sales office located at our Hopewell Junction, NY facilities. We also utilize distributors in Asia and Korea.



An OEM design cycle typically requires between 6 and 36 months, depending on the uniqueness of the market, the complexity of the end product or, in the case of military OEM customers, government procurement schedules. Because our microdisplays are the main functional component that defines many of our customers’ end products, we work closely with customers to provide technical assistance throughout the product evaluation and integration process.



Another element of our marketing strategy is discussions with customers and presentations to existing and potential customers at military, industrial and consumer tradeshows. Trade shows we have exhibited at, or plan to exhibit at include; Shot Show, the largest event for the recreational hunting and shooting market, Defense and Commercial Sensing Exposition sponsored by the International Society for Optics and Photonics, Army Aviation Association of America, Special Operations Force Industry Conference, Defense and Security Equipment International, Association of the United States Army, Eurosatory-France, Land, Naval & Internal Homeland Security Systems Exhibition, the Society for Information Display, Solid State Devices and Materials conference, and the International Meeting on Information Display and OLED World Summit. A key element of our marketing is the expansion of our presence in in new, high potential markets. We are experiencing heightened interest and requests for quotation from a variety of international companies that are familiar with the performance of our microdisplays.



Customers



We sell our products directly to military contractors and OEM’s who use our displays in a diverse range of applications encompassing the military, and commercial (in which we include the medical and industrial market sectors). We classify revenues as either military, commercial, consumer or multiple based on our knowledge of the customer’s products and markets served by our displays. Revenues classified as multiple are for sales to customers that incorporate our displays in products that could be used for either military or commercial applications. We also perform funded R&D activities for both prime contractors, U.S. government defense related agencies, and non-military customers, which are classified as Contract revenues. Product and Contract revenues are disclosed on the Consolidated Statements of Operations. We maintain relationships with OEMs in a diverse range of industries encompassing the military, commercial, and consumer market sectors.



---

 

The following table estimates revenues by market sectors:







The following table represents the domestic and international revenues as a percentage of total net revenues:







Backlog

 

As of December 31, 2020, we had a backlog of approximately $10.9 million, a decrease of approximately $0.8 million over the backlog of $11.7 million at December 31, 2019. Backlog is comprised of scheduled delivery dates through 2021 of non-binding customer purchase orders and purchase agreements, but does not include expected revenue from research and development contracts or expected non-recurring engineering programs under development. Backlog also does not include purchase orders for which deliveries are not or have not yet been scheduled. Our backlog may vary depending upon the timing of when orders are received and shipment dates scheduled, although we are generally seeing continuing growth in our year-over-year backlog. Variations in the magnitude and duration of purchase orders and customer delivery requirements may result in substantial fluctuations in backlog from period to period. Many of our purchase orders allow for rescheduling or cancellation by the customer with no or limited penalties.



Manufacturing Facilities 



Our manufacturing facilities are located in Hopewell Junction, NY. We currently lease approximately 63,000 square feet of space, which houses our equipment for OLED microdisplay fabrication and research and development, includes a 16,300 square foot class 10 clean room space, additional lower level clean room testing space, assembly space, and administrative offices.



In November 2020, we signed a new ten year lease expanding our current footprint to approximately 63,000 square feet, including an additional 8,000 square foot of space to be used as a class 10 clean room and additional storage space.  Additionally, at the end of the lease term we have two five-year options to extend the lease.



Facilities services provided by the lessor at our expense include our clean room, pure gases, high purity de-ionized water, compressed air, chilled water systems, and waste disposal support. This infrastructure provided by our lease provides us with many of the resources of a larger corporation without the added overhead costs. It further allows us to focus our resources more efficiently on our product development and manufacturing goals.



We employ a variety of specialized equipment in our manufacturing processes, including anode organic deposition tools, various sealing equipment, dicers, wire bonding equipment, heat testing ovens, and others.

 

We believe manufacturing efficiency is an important factor for success, especially in the consumer markets. We purchased $1.1 million and $1.1 million in 2020 and 2019, respectively, of additional equipment mainly related to manufacturing operations.  During 2020, we made deposits of $1.4 million for equipment under the IBAS and Title III government award programs. The new equipment added in fiscal 2020 will help us increase capacity and yield, address critical productions points, and replace certain older equipment, which we expect will aid us in meeting expected demand for our microdisplays. 



Competition

 

The industry in which we operate is highly competitive. We face competition from legacy technologies such as transmissive liquid crystal displays from Kopin Corporation, and liquid crystal on silicon displays as well as from alternative display technologies such as virtual scanning retinal displays. There are many large and small companies that manufacture or have in development products based on these technologies.



---

 

We believe we are the only company with U.S.-based manufacturing capability for OLED microdisplays. There are other non-U.S. based manufacturers of high-resolution OLED microdisplays that produce microdisplays that compete with our microdisplay products. They are Yunnan OLiGHTEK Opto‑Electronic Technology Co., Ltd. in China and MicroOLED in France. Both are shipping OLED microdisplays into the market. Sony Mobile Display Corp., in Japan, produces OLED microdisplays for integration into Sony’s own higher‑level systems such as digital cameras and HMDs and is now selling microdisplays to some commercial customers.



In addition, Olightek and BOE funded a joint venture to build a manufacturing facility in China to produce OLED microdisplays for the consumer AR/VR marketplace that came online in 2019, and, BOE is build additional OLED manufacturing facilities in China. Kopin Corporation has entered into a supply agreement with other Chinese manufacturers.



If other new OLED‑based companies enter our markets, we will face additional competition.



In addition, we compete with liquid crystal on silicon displays (LCOS), small transmissive liquid crystal displays (LCD), and OLED microdisplays manufactured by competitors. While we believe our OLED technology is technically superior by providing higher quality images, greater environmental ruggedness, reduced electronics cost and complexity, and improved power efficiency microdisplays, there is no assurance that we will continue to compete effectively. Competition can also come from inorganic micro LEDs, a technology still in the development stage but which could become a major competitor if all the technological hurdles are overcome.



Our ability to compete successfully will depend on a number of factors, both within and outside our control. These factors to include:





In addition, our customers may be reluctant to rely on a relatively small company such as eMagin for a critical component. We cannot assure you that we will be able to compete successfully against current and future competition, and the failure to do so would have a materially adverse effect upon our business, operating results and financial condition.



Intellectual Property



We have developed an intellectual property portfolio of patents, trade secrets and manufacturing know‑how. Our intellectual property includes 41 U.S. patents and 16 pending U.S. patent applications. We also have 5 issued foreign patents and 24 foreign filings. It is important to protect our investment in technology by obtaining and enforcing intellectual property rights, including rights under patent, trademark, trade secret, and copyright laws. We seek to protect inventions we consider significant by applying for patents in the United States and other countries when appropriate. The U.S. government holds licenses to much of our technology as a result of its funding a significant portion of our research and development.



Our intellectual property covers a wide range of materials, device structures, processes, and fabrication techniques, primarily concentrated in the following areas:





We believe that, in addition to patent protection, our success is dependent upon trade secrets, technical expertise, and know‑how. To protect this information and know‑how from unauthorized use or disclosure, we use nondisclosure agreements and other measures to protect our proprietary rights, and we require all employees and, where appropriate, contractors, consultants, advisors, and collaborators, to enter into confidentiality and non‑competition agreements. In addition, we work to continually improve our IT security posture through, among other things; network monitoring, enhancements to firewalls, antivirus and malware prevention software, email spam blockers, and end user security training. We believe that our intellectual property portfolio, coupled with our strategic relationships and accumulated manufacturing know‑how in OLED, gives us a significant advantage over potential competitors.

---

 



U.S. Government Regulation



We are subject to certain export control laws, including the Export Administration Regulations, or EAR, and the International Traffic in Arms Regulations, or ITAR. Certain of our products may be deemed to be controlled for export by the U.S. Commerce Department’s Bureau of Industry and Security under the EAR or by the U.S. State Department’s Directorate of Defense Trade Controls, or DDTC, under the ITAR. Our ITAR products are custom displays developed for a specific military program or purpose. Failure to comply with these export control laws can lead to severe penalties, both civil and criminal, and can include debarment from contracting with the U.S. government.



Environmental Law Compliance



Our operations are subject to various governmental regulations related to toxic, volatile, experimental, and other hazardous chemicals used in our design and manufacturing process. While we continue to incur costs to comply with environmental regulations, we do not believe that such costs will have a material effect on our capital expenditures, earnings, or competitive position. Although we believe that we are currently in material compliance with all applicable environmental regulations, we cannot be certain that we or our suppliers have not in the past violated applicable laws or regulations, which violations could result in required remediation or other liabilities. We also cannot be certain that past use or disposal of environmentally sensitive materials in conformity with then existing environmental laws and regulations will protect us from required remediation or other liabilities under current or future environmental laws or regulations. Any failure to comply with environmental regulations could result in the imposition of fines or in the suspension or cessation of our operations.



Employees

 

As of December 31, 2020, we had a total of 104 employees, of which 102 were full time. None of our employees are represented by a labor union. We have not experienced any work stoppages and consider our relations with our employees to be good.

 

Human Capital



Oversight and Management



Our Human Resources organization is tasked with leading our organization in managing employment-related matters, including recruiting and hiring, onboarding and training, compensation planning, talent management and development. We are committed to providing team members with the training and resources necessary to continually strengthen their skills. Our executive team is responsible for periodically reviewing team member programs and initiatives, including healthcare and other benefits, as well as our management development and succession planning practices. Management periodically reports to the Board and its committee’s human capital measures and results that guide how we attract, retain and develop a workforce to enable our business strategies.



Diversity, Equity and Inclusion



We believe that a diverse workforce is critical to our success, and we continue to monitor and improve the application of our hiring, retention, compensation and advancement processes for women and underrepresented populations across our workforce, including our team members of color, veterans and LGBTQ to enhance our inclusive and diverse culture. We continue to invest in recruiting diverse talent.



We strive to have a diverse culture of employees representing different genders, ages, ethnicities, sexual orientation, gender identity and abilities.



Workplace Safety and Health



A vital part of our business is providing our workforce with a safe, healthy and sustainable working environment. Our Environmental, Health and Safety program focuses on implementing change through employee observation and feedback channels to recognize risk and continuously improve our processes, as well as conducting regular risk reviews and self-audits at our manufacturing facility to explore new opportunities to reduce potential employee exposure to occupational injuries.



Importantly during 2020, our experience and continuing focus on workplace safety have enabled us to preserve business continuity without sacrificing our commitment to keeping our colleagues and workplace visitors safe during the COVID-19 pandemic. At the onset of the pandemic we established a team to monitor new COVID-19 related developments and support our operations to respond to the ever-changing landscape.



---

 

The team consists of our Executive Management team, Human Resources, Manufacturing, IT, and Safety, and provides updates to the Board of Directors.  The team’s goals are to:





We took immediate action at the onset of the COVID-19 pandemic to enact rigorous safety protocols in our facilities by improving sanitation measures, implementing mandatory social distancing, temperature screening, use of facing coverings, reducing on-site staff through staggered shifts and schedules, remote working where possible, and restricting visitor access to our locations. These actions, in addition to generally being deemed an essential business, have enabled us to continue operating our business with minimal disruptions during the pandemic.



Available Information

 

Our website address is www.emagin.com. We make available free of charge through our website our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, our Proxy Statements and all amendments to such reports filed under the Securities Exchange Act of 1934, as amended, after we electronically file such material with, or furnish such material to, the Securities and Exchange Commission, or SEC. These reports may be accessed from our website by following the links under “Investors,” then “SEC Filings.” The information found on our website is not part of this or any other report we file with or furnish to the SEC. We assume no obligation to update or revise any forward-looking statements in this Annual Report or in other reports filed with the SEC, whether as a result of new information, future events or otherwise, unless we are required to do so by law. A copy of this Annual Report and our other reports is available without charge upon written request to Investor Relations, eMagin Corporation, 700 South Drive, Suite 201, Hopewell Junction, NY 12533.

 

We also post on our website the charters of our Audit, Compensation, Governance and Nominating committees, our Code of Ethics and any amendments of or waiver to such code of ethics, and other corporate governance materials recommended by the SEC as they occur, as well as earnings press releases and other business-related press releases.



---

 

ITEM 1A. RISK FACTORS



You should carefully consider the following risk factors and the other information included herein as well as the information included in other reports and filings made with the SEC before investing in our common stock. The following factors, as well as other factors affecting our operating results and financial condition, could cause our actual future results and financial condition to differ materially from those projected. The trading price of our common stock could decline due to any of these risks, should they materialize, and you may lose part or all of your investment.



Risks Related To Our Financial Position 

 

There is substantial doubt about our ability to continue as a going concern. If we are unable to continue as a going concern, our securities will have little or no value.



Our independent registered public accounting firm has issued a report for our financial statements at December 31, 2020 that includes an explanatory paragraph referring to our negative cash flow and recurring losses from operations, which raises substantial doubt about our ability to continue as a going concern without additional capital becoming available. As a result of our historical losses and current financial condition, there is substantial doubt about our ability to continue as a going concern through March 31, 2022.  Our ability to continue as a going concern is dependent upon our uncertain ability to generate sufficient cash flows from operations, obtain equity and/or debt financing and reduce expenditures. Specifically, we have incurred substantial net losses in the past and we may incur further losses in the future. Our net losses were $11.4 million and $4.3 million for the year ended December 31, 2020 and 2019. December 31, 2020, we had an accumulated deficit of $252.1 million. We can give no assurances that our losses will not continue in the future or that we will be profitable in the future. Our prior losses and potential continuing or future losses have had, and would continue to have, an adverse effect on our financial condition. In order for us to achieve profitability, we must, among other things, generate sufficient cash flows and/or obtain the additional financing we need in order to continue as a going concern; generate additional revenue; manufacture our products on a timely basis and at a competitive cost; continue to remediate manufacturing issues that have resulted in production delays; integrate new equipment on our manufacturing line, including equipment provided under government awards,  meet our yield improvement initiatives; and successfully reduce expenses. If we are unable to successfully take these and other necessary steps, we may never operate profitably, and, even if we do achieve profitability, we may be unable to sustain or increase our profitability in the future. As of December 31, 2020, the Company had $8.3 million of cash, $1.9 million of outstanding indebtedness and borrowing availability of $2.1 million under its ABL Facility. In addition, the Company has $1.9 million outstanding under a PPP loan, which may be forgiven if the loan is used for eligible expenses and meets PPP criteria for forgiveness.



Our cash position as of December 31, 2020 reflects the receipt of approximately $9.8 million in net proceeds from sales of our common shares under an at the market, or ATM facility, as amended which we terminated in July 2020, of which $1 million was applied to repayment of our ABL Facility. Our ongoing operations may require us to raise additional funds, and there are no assurances that such financing will be available on terms acceptable to us, or at all. Our financial statements do not include any adjustments that may result from the outcome of this uncertainty. If we are unable to reduce our expenditures or generate additional funds in the future through sales of our products, financings, government grants, loans or from other sources or transactions, we will exhaust our resources and will be unable to maintain our currently planned operations. If we cannot continue as a going concern, our stockholders would likely lose most or all of their investment in us.



Our financial condition is limited. If we are unable to generate additional revenue or secure additional external financing when required, we may have to curtail our operations or cease our development plans and operations.



Our ability to continue current operations and to execute on our plans is dependent on our ability to generate sufficient cash flows from operations, raise additional capital or refinance our indebtedness to meet our obligations. Since the maximum amount of the borrowing base under our ABL Facility is based, in part, on our eligible accounts receivables, our borrowing ability could also be negatively impacted by any decrease in our accounts receivables. As of the December 31, 2020, we had $1.9 million in borrowings outstanding, and unused borrowing availability of $2.1 million, under our ABL Facility.



We incurred net losses of $11.4 million and $4.3 million for the year ended December 31, 2020 and 2019, respectively. Net cash used in operating activities for the years ended December 31, 2020 and 2019 was $4.9 million and $5.1 million, respectively. On December 31, 2020, we had cash and cash equivalents of $8.3 million, net working capital of $12.1 million, and accounts payable of $1.2 million. This compares to $3.5 million, $8.8 million, and $1.3 million, respectively, at December 31, 2019.  As of December 31, 2020, we had an accumulated deficit of $252.1 million.



If we are unable to meet our obligations as they become due over the next twelve months, we may not be able to continue our current operations.



Our ability to continue current operations and to execute on our plans is dependent on our ability to generate sufficient cash flows from operations, maintain our relationships with vendors and customers, secure alternative financing or refinance our indebtedness to meet

---

 

our obligations. If adequate funds are not available to us on a timely basis, or at all, we may have to reduce current operations and delay capital expenditures in order to conserve cash.



Based on our current operating plan, working capital levels, financial projections, and our ability to borrow under our ABL Facility, we anticipate being able to meet our financial obligations as they become due through the fourth quarter of 2021. However, there can be no assurance that our plans will be achieved.



If we do not achieve our current financial projections we will be unable to maintain our currently planned operations after the fourth quarter of 2021, and we may violate one or more of our financial covenants under our ABL Facility. In addition, there can be no assurance that we will be able to renew or extend our ABL Facility when it matures on December 31, 2021.  Although relations with the lender are positive and the Company expects the facility to be renewed upon expiration, there is no assurance the lender will renew or extend this facility, or continue to make funds available during 2021 and beyond at present availability levels, or at all. We have no additional committed external sources of funds and additional financing may not be available when we need it or on terms that are favorable to us, if at all. In addition, we may seek additional capital, or consider strategic alternatives.



We cannot provide assurance that any actions by us to raise additional funds would be successful or, if such efforts were successful, that we would generate sufficient funds to meet our financial obligations as they become due and allow us to continue current operations or that these actions would be permitted (i) under the terms of our existing or future debt agreements or (ii) by the holders of a majority of the then outstanding series B convertible preferred stock, whose approval is required in order for us to take certain actions. If we do not have enough cash to fund our operations to profitability and if we are unable to secure additional capital, we may be required to seek strategic alternatives, including but not limited to a potential business combination, a sale of our company or our business, or a reduction and/or cessation of our operations.



We have had losses in the past and may incur losses in the future.



Our accumulated deficit is approximately $252.1 million as of December 31, 2020. We can give no assurances that we will be profitable in the future. We cannot assure you that if we become profitable that we will be able to sustain profitability or that we will not continue to incur operating losses in the future.



We may require significant additional capital funding and such capital may not be available to us.



In the event that our operating expenses or working capital levels are higher than anticipated, we may be required to implement contingency plans within our control to conserve and/or enhance our liquidity to meet operating needs. Such plans include implementing cost reductions and restricting our operations. Our cash requirements relate primarily to working capital needed to operate and grow our business, including funding operating expenses and increasing production and inventory levels. Our ability to meet future liquidity needs and capital requirements will depend upon numerous factors, including the timing and quantity of product orders and shipments, the timing and amount of our operating expenses; the ability to raise additional funding, the timing and costs of working capital needs; the extent to which our products gain market acceptance; the timing and costs of product development and introductions; the extent of our ongoing and any new research and development programs, and any potential changes in our strategy or our planned activities. If we are unable to fund our operations without additional financing and therefore cannot sustain future operations, we may be required to delay, reduce and/or cease our operations.



Alternatives we would consider for additional funding include additional equity or debt financings, or licensing of our technology. In addition to raising capital, we may also consider strategic partnerships and government programs that may be available to us. If we are unable to obtain additional capital, we may not be able to sustain our future operations and may be required to delay, reduce and/or cease our operations. We cannot assure you that any necessary additional financing will be available on terms favorable to us, or at all. Additionally, even if we raise sufficient capital through additional equity or debt financings, strategic alternatives or otherwise, there can be no assurance that the revenue or capital infusion will be sufficient to enable us to develop our business to a level where it will be profitable or generate positive cash flow. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we incur additional debt, a substantial portion of our operating cash flow may be dedicated to the payment of principal and interest on such indebtedness, thus limiting funds available for our business activities. The terms of any debt securities issued could also impose significant restrictions on our operations. Broad market and industry factors may seriously harm the market price of our common stock, regardless of our operating performance, and may adversely impact our ability to raise additional funds.

---

 

Risks Related To Our Business and Industry





Our operating results have significant fluctuations.



In addition to the variability resulting from the short‑term nature of commitments from our customers, other factors contribute to significant periodic quarterly fluctuations in results of operations. These factors include, but are not limited to, the following:





The manufacture of active matrix OLED microdisplays encompasses several complex processes resulting in irregular production schedules, including production delays and interruptions, which could adversely affect our operating results.



Our product technology and manufacturing processes are evolving which can result in production challenges and difficulties. We cannot assure you that we will be able to produce our products in sufficient quantity and quality to maintain existing customers and attract new customers. In addition, we cannot assure you that we will not experience manufacturing problems which could result in delays in delivery of orders or product introductions.



Several steps of our production processes are dependent upon certain critical machines and tools which have in the past, and could in the future, result in delivery interruptions and reduced revenues.



We currently have equipment that is critical to our manufacturing operations for which there is no redundancy. If we experience any significant disruption in the operation of our manufacturing facility or a serious failure of a critical piece of equipment, we may be unable to supply microdisplays to our customers in a timely manner. Interruptions in our manufacturing could be caused by equipment problems, the introduction of new equipment into the manufacturing process or delays in the delivery of new manufacturing equipment. Lead‑time for delivery, installation, testing, repair, and maintenance of manufacturing equipment can be extensive. We have experienced production interruptions and/or delays in the past, including in the first and second quarters of fiscal 2019, and fourth quarter of 2020 and no assurance can be given that we will not lose potential sales or be unable to meet production orders due to future production delays or interruptions in our manufacturing line.



We rely on key sole source and limited source suppliers.



We depend on a number of sole source or limited source suppliers for certain raw materials, components, and services. These include silicon wafers, circuit boards, graphic integrated circuits, passive components, materials and chemicals, and equipment support. We maintain several single‑source supplier relationships either because alternative sources are not available or because the relationship is advantageous to us due to performance, quality, support, delivery, capacity, or price considerations or a combination thereof. Even where alternative sources of supply are available, qualification of the alternative suppliers and establishment of reliable supplies could result in delays and a possible loss of sales, which could materially and adversely affect our operating results. We do not manufacture the silicon integrated circuits on which we incorporate our OLED technology. Instead, we provide the design layouts to semiconductor contract manufacturers who manufacture the integrated circuits on silicon wafers.  Our industry relies on a limited number of foundries to produce the silicon wafers and backplanes required by our manufacturing process. Should foundries be unable to provide the required amount of silicon wafers for production, because of either capacity constraints or natural disasters, our ability to manufacture microdisplays would be affected.  Our inability to obtain sufficient quantities of components and other materials or services on a timely basis could result in manufacturing delays, increased costs and ultimately in reduced or delayed sales or lost orders which could materially and adversely affect our operating results. Generally, we do not have long‑term contracts or written agreements with our source suppliers but instead operate on the basis of short-term purchase orders.



---

 

The COVID-19 pandemic has affected our business and could materially adversely affect our financial condition and results of operations and ability to continue as a going concern.



The COVID-19 pandemic has resulted in authorities imposing, and businesses and individuals implementing, numerous unprecedented measures to try to contain the virus, such as travel bans and restrictions, quarantines, shelter-in-place/stay-at-home and social distancing orders, and shutdowns. These measures have impacted and may further impact our workforce and operations, the operations of our customers, and those of our respective vendors, suppliers, and partners.



The COVID-19 pandemic has impacted our business. We experienced closures of sections of our plant that lasted between one and two weeks after two of our employees tested positive for COVID-19. During the closures, we were unable to complete certain manufacturing stages and unable to ship some of our products. We have also experienced repeated production disruptions related to the unwillingness or inability of certain of our equipment repair vendors to travel to our facility, the temporary loss of services of employees quarantined due to COVID-19 and delays in the supply of raw materials caused by disruptions due to COVID-19 at one of our vendors. Any period of interrupted access to our manufacturing facilities or our workforce, or similar limitations for our vendors and suppliers, can impact our ability to meet customer demand and could have a material adverse effect on our financial condition and results of operations, particularly if prolonged. In addition, if we are unable to continue regularly scheduled maintenance of our manufacturing equipment, our manufacturing capabilities may be negatively impacted and we may experience further unscheduled closures and/or production disruptions, which could have a material adverse effect on our financial condition and results of operations.



Due to the measures implemented to contain the COVID-19 outbreak, our suppliers, located both inside and outside of the United States, may have limited supplies of, or may be unable to produce, the components we use to manufacture our products. Any significant disruption in the supply of such components could impair our ability to satisfy customer orders, which could have a material adverse effect on our financial condition and results of operations. In addition, there has been an increase in demand, both inside and outside of the United States, for the personal protective equipment, or PPE, we use in our manufacturing facilities in order to maintain a safe working environment. If we are unable to obtain the required PPE, we may have to temporarily close certain sectors of our facilities until the needed supplies are obtained, which could have a material adverse effect on our financial condition and results of operations.



Certain of our customers have experienced, and may continue to experience, disruptions in their operations and supply chains, which can result in delayed, reduced, or canceled orders, or collection risks, and which may adversely affect our results of operations. During 2020, certain of our customers requested delays in product deliveries due to plant closures related to COVID-19. In April 2020, the U.S. Department of Defense announced a three-month slowdown in equipment procurement related to COVID-19. Due to shelter-in-place and similar measures, which restrict, and in some cases prohibit, elective medical procedures, in the future we may also experience delayed, reduced or canceled orders from our customers in the medical market sector. Any existing or future delays, reductions or cancellation of orders from our customers military, commercial or consumer market customers may adversely affect our results of operations.



Escalating trade tensions between the United States and China have led to increased tariffs, trade restrictions and buy American initiatives, and have affected customer ordering patterns. The United States has imposed restrictions on the export of U.S.-regulated products and technology to our international customers, including those located in China. As a result of the COVID-19 pandemic, we believe there is a risk that U.S. laws and regulations governing the export of goods and technology, including the EAR and ITAR, may be revised to impose even tighter restrictions, which could negatively impact our ability to successfully market and sell our non-military products to customers located in China. Existing and future restrictions could also potentially interfere with our ability to pursue manufacturing in China and our efforts to partner with consumer companies who might seek to build displays using our technology at high volume manufacturing facilities located in China.



The spread of COVID-19 has caused us to modify our business practices (including employee travel, employee work locations, cancellation of physical participation in meetings, events and conferences, and social distancing measures), and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers, partners, vendors, and suppliers. Work-from-home and other measures introduce additional operational risks, including cybersecurity risks, and have affected the way we conduct our activities, which could have an adverse effect on our operations. Due to the increase in employees working from home and accessing our network and systems remotely, we face increased risk of security breaches and other disruptions which could compromise our information technology systems, and expose to liability, theft of sensitive data or damage to our reputation. There is no certainty that such measures will be sufficient to mitigate the risks posed by the virus, and future employee virus or workforce disruptions could lead to unavailability of key personnel and harm our ability to perform critical functions. In addition, our ability to attract, recruit and retain highly skilled and qualified technical and consulting personnel or other employees may be impacted by COVID-19 travel restrictions, and other COVID-19 health concerns related to relocation on the part of potential employees and their families.



---

 

The pandemic has significantly increased economic and demand uncertainty. It is possible that the current outbreak and continued spread of COVID-19, including any vaccine resistant strains, or any resurgence will cause the economic slowdown to continue, and it is possible that it could cause a global recession. Although vaccines are becoming more widely available, there is a significant degree of uncertainty and lack of visibility as to the extent and duration of the pandemic and related slowdowns or economic trends. If either were prolonged, demand for our products will be significantly harmed. Although many jurisdictions are now open with social distancing measures implemented to curtail the spread of COVID-19, but we cannot predict the length of time that it will take for any meaningful economic recovery to take place. We also cannot predict whether vaccine resistant strains will lead to  additional surges in new cases of COVID-19, or the severity of such surges if/when they occur, such that governmental authorities decide to reimpose quarantines, lockdowns or travel restrictions, which could further materially and adversely affect our  results and financial condition. 



We have experienced occasional delays in product shipments, which may be exacerbated if there are additional surges or of quarantines, lockdowns or travel restrictions are re-imposed or heightened. There is no assurance that our operations will not be further disrupted in the future by additional impacts of the COVID-19 virus or any resurgences, on either our internal operations or those of our suppliers or customers, including the possible impact of travel restrictions on key support personnel for our critical production equipment. Any continued economic slowdown could adversely affect our business in the last quarter of 2020 and extending into 2021. Given the significant economic uncertainty and volatility created by the pandemic, it is difficult to predict the nature and extent of the impact on demand for our products. These expectations are subject to change without warning and investors are cautioned not to place undue reliance on them. Unanticipated consequences of the pandemic and resulting economic uncertainty could adversely affect our liquidity and capital resources in the future as well as our ability to continue as a going concern.



Our results of operations, financial condition and business would be harmed if we were unable to balance customer demand and capacity.



As customer demand for our products changes, and as we enter new markets which may require higher volume mass production, we must be able to ramp up or adjust our production capacity to meet demand or enter into relationships with high volume manufacturers. We are continually taking steps to address our manufacturing capacity needs for our products. If we are not able to expand our manufacturing capacity or enter into relationships with high volume manufacturers, our prospects may be limited, and our business and results of operations could be adversely impacted. If we experience delays or unforeseen costs associated with adjusting our capacity levels, we may not be able to achieve our financial targets. For some of our products, vendor lead times exceed our customers’ required delivery time, causing us to order to forecast rather than order based on actual demand. Ordering raw material, building finished goods, and scheduling contract manufacturer production for our consumer products based on forecasts exposes us to numerous risks, including potential inability to service customer demand within an acceptable timeframe, holding excess inventory or having unabsorbed manufacturing overhead.



Variations in our production yields impact our ability to reduce our costs and could cause our margins to decline and our operating results to suffer.



All of our products are manufactured using technologies and processes that are highly complex. The number of usable items, or yield, from our production processes may fluctuate as a result of many factors, including but not limited to the following:





Variations in our production yields impact our costs and cause our margins to decline and our operating results to suffer. For example, in the fourth quarter of fiscal 2018 and the first and second quarters of fiscal 2019, and the fourth quarter of 2020, we experienced low production yields and output and an adverse impact on our gross margins and operating results due to equipment failures. Although we began implementing remedial measures during the fourth quarter of 2018, there can be no assurance as to the continued effectiveness of the remedial measures we implemented or that yields and production volumes will remain at or above levels experienced during such periods.



---

 

Demand for our products is dependent on economic conditions, changes in government regulation and could be impacted by alternative display technologies.



Historically, approximately 9% of our revenue comes from sales to customers using our displays for commercial applications, including within the industrial and medical sectors. Demand by commercial customers for OLED displays could decline due to overall economic conditions and the development of alternative technologies that might offer the enhanced performance of OLED displays at a lower price. Demand for products incorporating our displays could be also affected if our OEM customers are impacted by changes in governmental, regulation or medical regulation or insurance reimbursements that influence demand for medical devices that use our products.



Our competitors have many advantages over us.



The industry in which we operate is highly competitive. We face competition from legacy technologies such as transmissive liquid crystal displays from Kopin Corporation and liquid crystal on silicon displays as well as from alternative display technologies such as virtual scanning retinal displays. There are many large and small companies that manufacture or have in development products based on these technologies. In addition, we compete with liquid crystal on silicon displays, small transmissive liquid crystal displays, and OLED microdisplays manufactured by competitors. Competition can also come from inorganic micro LEDs, a technology still in the development stage but which could become a major competitor if the technological hurdles are overcome. Certain of our competitors have operations based in China, where lower manufacturing and production costs may provide them with a competitive advantage. For example Olightek and BOE recently funded a joint venture to build a manufacturing facility that came online in 2019, BOE has plans to build additional OLED manufacturing facilities in China and Kopin Corporation has entered into a supply agreement with both BOE and other Chinese manufacturers. We cannot assure you that we will be able to compete successfully against current and any future competition, and the failure to do so would have a materially adverse effect upon our business, operating results and financial condition.



We are subject to cyclical demand.



Our business strategy is dependent on OEM manufacturers’ building and selling products that incorporate our OLED displays as components into those products. Fluctuations in demand could cause significant harm to our business. Our inventory may increase if build products to meet anticipated demand that does not develop. Alternatively, we may experience production shortages if demand increases sharply and we are unable to meet requirements to produce an increased number of displays.



Our products are subject to lengthy OEM development periods.



We sell most of our microdisplays to OEMs who will incorporate them into products they sell. OEMs determine during their product development phase whether they will incorporate our products. The time elapsed between initial sampling of our products by OEMs, the custom design of our products to meet specific OEM product requirements, and the ultimate incorporation of our products into OEM consumer products is significant, often with a duration of between one and three years. If our products fail to meet our OEM customers’ cost, performance or technical requirements or if unexpected technical challenges arise in the integration of our products into OEM consumer products, our operating results could be significantly and adversely affected. Long delays in achieving customer qualification and incorporation of our products also could adversely affect our business and our operating results.



In order to increase or maintain our profit margins we may have to continuously develop new products, product enhancements and new technologies.



In some markets, prices of established products tend to decline over time. In order to increase or maintain our profit margins over the long‑term, we believe that we will need to continuously develop new products, product enhancements and new technologies that will either slow price declines of our products or reduce the cost of producing and delivering our products. While we anticipate many opportunities to reduce production costs over time, there can be no assurance that these cost reduction plans will be successful, that we will have the resources to fund the expenditures necessary to implement certain cost‑saving measures, or that our costs can be reduced as quickly as any reduction in unit prices. We may also attempt to offset the anticipated decrease in our average selling price by introducing new products with higher selling prices that may or may not offset price declines in more mature products. If we fail to do so successfully, our results of operations could be materially and adversely affected.



Our business strategy for the consumer market will fail if we cannot continue to form strategic relationships with consumer and other companies that manufacture and use products that could incorporate our active matrix OLED technology.



Our prospects could be significantly affected by our ability to maintain and develop strategic alliances with tier-one consumer companies and high-volume manufacturers and with OEMs for incorporation of our active matrix OLED microdisplay technology into their products. While we intend to continue to establish strategic relationships with manufacturers of electronic consumer products, personal computers, chipmakers, lens makers, equipment makers, material suppliers, and/or systems assemblers; there is no assurance that we will be able to continue to establish and maintain strategic relationships on commercially acceptable terms, or that the alliances we do enter into will realize their objectives. Failure to do so would have a material and adverse effect on our business.

---

 



Our military and commercial contract revenue is variable and dependent on a small number of customers. The continuation of our consumer contract revenue and our goal of developing a licensing revenue stream using our dPd and other display technology is subject to many risks and uncertainties.



Our military and commercial contract revenue is historically comprised of a small number of customers and can vary significantly from year to year. Specifically, our military and commercial contract revenue has varied from $2.9 million in the year ended December 31, 2018, to $2.1 million in the year ended December 31, 2019, to $4.4 million in the year ended December 31, 2020.  Our prospects for commercial contract revenue are dependent on the market and technology for AR/VR systems which is in its early stages. Industry players are evaluating numerous display alternatives including OLED microdisplays, LCOS displays, smartphone screens and other display technologies. Numerous AR/VR devices are presently available in the marketplace and beginning to gain acceptance. Our 2020 commercial contract revenue primarily relates to work with a tier-one consumer customer that is presently in the development and proof of concept stages. In the event that companies with which we are not engaged launch AR/VR devices that gain widespread market acceptance, continued business with us may not serve the strategic interests of our present or future consumer customers. This consumer customer may not be satisfied with the performance of our dPd displays and terminate their development process with us, or choose to use OLED microdisplays produced by a competing company, or alternative display technologies.  In the event we were no longer engaged in OLED microdisplay development for consumer companies, if this customer were to terminate its development process with us or if we were to lose other commercial or military contract revenue, our business and operating results could be adversely affected.



The success of our AR/VR efforts is dependent upon widespread acceptance of AR/VR systems and products in the consumer and commercial marketplace.



The market for AR/VR systems and products is developing slower than originally forecast. The success of our efforts in the AR/VR market will depend on the widespread acceptance of AR/VR systems and products in the consumer, enterprise and commercial markets. At present, it is difficult to assess or predict with any assurance the potential size, timing and viability of the consumer and commercial AR/VR market, as well as our ability to partner with a foundry or other mass production partner to produce a sufficient number of displays to address this potential market.



The market segment for AR/VR systems and products may take longer to develop than we anticipate or may not develop, which may impact our ability to grow display and contract revenues.



Although we believe our displays are suitable for AR/VR systems and products that hold great potential for use in various consumer market applications, our success will depend on the acceptance of systems and products by consumers and in particular the widespread adoption of our displays and dPd technology for AR/VR hardware. We are unable to predict when or if customers will choose to incorporate out displays into their AR/VR hardware, or if consumers will accept their systems. In addition, even if consumers accept AR/VR products, manufactures may choose to manufacture systems using our competitors’ displays, or their own in-house display designs. Our success in commercializing and licensing our dPd displays suitable for AR/VR products is important in our ability to achieve positive cash flow and profitability. If we are unable to commercialize our dPd displays for AR/VR products, we may be unable to increase revenues or achieve profitability or positive cash flow.



We seek to develop widespread market acceptance of our displays for AR/VR systems and products in the consumer market which is extremely competitive and is highly susceptible to fluctuations in demand.



We seek to partner with companies to develop widespread market acceptance of our displays and related AR/VR systems and products in the consumer market. This market is extremely competitive and is highly susceptible to fluctuations in demand. The consumer products market is intensely competitive and price sensitive. Sales of consumer products have historically been dependent upon discretionary spending by consumers. Consumers may defer or alter purchasing decisions based on economic conditions or other factors, and accordingly could cause a reduction in demand for products such as AR/VR systems and products using our displays Any downturn in global economic conditions may cause a decrease in overall consumer demand and in demand for our products in the near term and possibly longer and prevent our systems and products using our displays from gaining widespread market acceptance.

---

 

Risks Related To Our Common Stock

The market price of our common stock may be volatile.

The market price of our common stock has been subject to wide fluctuations. During our four most recently completed fiscal quarters, the closing price of our stock ranged from a low of $0.20 to a high of $1.93. The market price of our common stock in the future is likely to continue to be subject to wide fluctuations in response to various factors, including, but not limited to, the following:





In addition, the public stock markets have experienced extreme price and volume fluctuations that have particularly affected the market price for many technology companies and that have often been unrelated to the operating performance of these companies. The broad market fluctuations and other factors may continue to adversely affect the market price of our common stock.



Provisions in certain of our commercial agreements and our military business may prevent or delay an acquisition of, partnership with, or investment in us, and our ability to develop OEM and mass production partnerships, which could decrease the market value of our common stock.



Provisions in certain of our commercial agreements may discourage, delay or prevent a merger, acquisition or other change in control that stockholders may consider favorable. In addition, as a contractor and subcontractor to the U.S. federal government, we are subject to and must comply with various government regulations that impact our operating costs, profit margins and the internal organization and operation of our business. As a result, these provisions and business may prevent or delay an acquisition of, partnership with, or investment in, our Company and our ability to develop OEM and mass production partnerships and could limit the price that strategic investors may be willing to pay in the future for shares of our common stock. They could also deter potential partners or acquirers of our Company, thereby reducing the likelihood that you could receive a premium for your common stock in an acquisition.



Failure to meet the maintenance criteria of the NYSE American may result in the delisting of our common stock, which could result in lower trading volumes and liquidity, lower prices of our common shares and make it more difficult for us to raise capital.



Our common stock is listed on the NYSE American, and we are subject to its continued listing requirements, including maintaining certain share prices and a minimum amount of shareholder’s equity. If we are unable to comply with the NYSE American continued listing requirements, including its trading price requirements, our common stock may be suspended from trading on and/or delisted from the NYSE American. Although we have not been notified of any delisting proceedings, there is no assurance that we will not receive such notice in the future or that we will be able to then comply with NYSE American listing standards. The delisting of our common stock from the NYSE American may materially impair our stockholders' ability to buy and sell our common stock and could have an adverse effect on the market price of, and the efficiency of the trading market for, our common stock. In addition, the delisting of our common stock could significantly impair our ability to raise capital.



Future issuances of our common stock could lower our stock price and dilute the interests of existing stockholders.



We may issue additional shares of our common stock in the future, including shares of our common stock in connection with acquisitions, strategic partnerships or joint ventures that we believe will allow us to complement our growth strategy, increase market share in our current markets and expand into adjacent markets, broaden our technology and intellectual property, and strengthen our relationships with distributors and OEMs. Any future issuances of shares of our common stock, including in connection with any future acquisition, partnership or joint venture, may result in the dilution of existing stockholders to the extent we are required to issue equity securities.



The issuance of a substantial amount of common stock could have the effect of substantially diluting the interests of our current stockholders. In addition, the sale of a substantial amount of common stock in the public market, either in the initial issuance or in a subsequent resale by investors who acquired such common stock in a private placement, could have a material adverse effect on the market price of our common stock.



In addition, we recently notified the holders of our series B convertible preferred stock, that the $0.75 conversion price was reduced to $0.3022 due to sales of our common stock in December 2019, as required by a dilution provision in the related series B preferred stock agreements. As a result, the number of shares of common stock issuable upon the conversion of the series B preferred stock was increased from 7.5 million to 18.3 million shares.  If the holders of the series B convertible preferred stock sell any or all of the common stock

---

 

issuable upon conversion of the series B convertible preferred stock, this could have a material adverse effect on the market price of our common stock.



Concentration of ownership of our stock may enable one stockholder or a small number of stockholders to significantly influence matters requiring stockholder approval.  



As of March 1, 2021, Stillwater Holdings LLC (f/k/a Stillwater LLC) owned approximately 15% of our outstanding voting stock, Flat Creek Fiduciary Management, as trustee of a trust which the sole member of Stillwater Holdings LLC has investment control, owned approximately 5% of our outstanding voting stock, Stillwater Trust LLC owned 0% of our outstanding voting stock and the sole member of Stillwater Holdings LLC is the investment manager of Rainbow Gate Corporation, which owned approximately 4% of our outstanding voting stock. Together such stockholders owned approximately 23% of our outstanding voting stock. As a result, these stockholders, if they act together, may be able to exert a significant degree of influence over matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. Further, if these stockholders act together with another stockholder, Ginola Limited, which has common directors with Mount Union Corp. and Chelsea Trust Company, as of March 1, 2021, they would collectively have represented approximately 28% of our outstanding voting stock. This concentration of ownership may facilitate or hinder a change of control and might affect the market price of our common stock. Furthermore, the interests of this concentration of ownership may not always coincide with our interests or the interests of other stockholders. In January and February 2021, the holders of the series B preferred shares have sold 3.9 million shares of our outstanding common stock.  Future sales of common stock by the holders of the series B preferred shares may negatively impact the price or our common stock.



The holders of shares of our series B convertible preferred stock have and may continue to exercise significant influence over us.



Under the terms of the certificate of designations governing our series B convertible preferred stock, the series B convertible preferred stock generally ranks, with respect to liquidation and dividends, senior to our other securities and, so long as any shares of series B convertible preferred stock remain outstanding, the approval of the holders of a majority of the series B convertible preferred stock outstanding at the time of approval is required in order for us to, among other things, (i) amend, alter or repeal our certificate of incorporation if such amendment, alteration or repeal adversely affects the powers, preferences or special rights of the series B convertible preferred stock; (ii) create any series or class of stock ranking senior as to liquidation rights or dividends with the series B convertible preferred stock (other than series A senior secured convertible preferred stock, or series A convertible preferred stock); (iii) redeem, or pay dividends on, any class or series of our capital stock (other than the series A convertible preferred stock); or (iv) so long as there are holders of at least 577 outstanding shares of series B convertible preferred stock, issue any shares of series B convertible preferred stock. The terms of the certificate of designations also provide that so long as any shares of series B convertible preferred stock are outstanding, we may not offer, sell or issue, or enter into any agreement, arrangement or understanding to offer, sell or issue, any common stock or common stock equivalent (other than offerings that are underwritten on a firm commitment basis and registered with the SEC under the Securities Act) without the approval of holders of a majority of the series B convertible preferred stock outstanding. These and other rights granted to holders of the series B convertible preferred stock enable the holders thereof to exert substantial control over our affairs and potentially exercise their control in a manner adverse to the interest of our other stockholders. The consent requirements set forth in the certificate of designations has impaired, and may in the future impair, our ability to raise capital. For example, the holders of the series B convertible preferred stock recently withheld consent to a proposed capital raise and, as a result, we were unable to proceed with the proposed offering. There can be no assurance that the holders of our outstanding series B convertible preferred stock will not withhold their consent for any future capital raise we propose. The consent requirements set forth in the certificate of designations may also delay or prevent any acquisition of our company on terms that our other stockholders may desire and may adversely affect the market price of our common stock.



We do not intend to pay cash dividends. We last paid a dividend on our capital stock in 2012 and we do not anticipate paying any dividends in the foreseeable future. Consequently, any gains from an investment in our securities will likely depend on whether the price of our common stock increases.



We have not paid dividends on any of our capital stock since 2012. We currently intend to retain our future earnings, if any, to fund the development and growth of our business. In addition, our ABL Facility prohibits us from paying cash dividends on our common stock. As a result, capital appreciation, if any, of our common stock will be your sole source of gain for the foreseeable future. Consequently, in the foreseeable future, you will likely only experience a gain from your investment in our securities if the price of our common stock increases.



If industry or financial analysts do not publish research or reports about our business, or if they issue inaccurate or unfavorable research regarding our common stock, our share price and trading volume could decline.



Due to our continued losses and lack of consistent revenue growth, there may be little or no incentive for securities analysts of brokerage and other financial firms to provide investment coverage of us or to recommend the purchase of our common stock. Any reports that industry or financial analysts publish about us or our business may influence the trading market for our common stock. We do not control these analysts, whether they provide investment coverage of us, or the content and opinions included in any of their reports. If any of the analysts who cover us issues an inaccurate or unfavorable opinion regarding our company, our stock price would likely

---

 

decline. In addition, the stock prices of many companies in the technology industry have declined significantly after those companies have failed to meet, or significantly exceed, the financial guidance publicly announced by the companies or the expectations of analysts. If our financial results fail to meet, or significantly exceed, our announced guidance or the expectations of analysts or public investors, analysts could downgrade our common stock or publish unfavorable research about us. If, after initiating coverage of us and our common stock, one or more analysts were to cease coverage of our company or fail to publish reports on us regularly, our visibility in the financial markets could decrease, which in turn could cause our stock price or trading volume to decline.



A provision in our certificate of incorporation and by‑laws may prevent or delay an acquisition of our company, which could decrease the market value of our common stock.



Provisions of Delaware law, our certificate of incorporation and our by‑laws may discourage, delay or prevent a merger, acquisition or other change in control that stockholders may consider favorable. These provisions may also prevent or delay attempts by stockholders to replace or remove our current management or members of our Board of Directors. These provisions include:





In addition, we are subject to the provisions of Section 203 of the Delaware General Corporation Law, which limits business combination transactions with stockholders of 15% or more of our outstanding voting stock that our Board of Directors has not approved. These provisions and other similar provisions make it more difficult for stockholders or potential acquirers to acquire us without negotiation. These provisions may apply even if some stockholders may consider the transaction beneficial to them. As a result, these provisions could limit the price that investors are willing to pay in the future for shares of our common stock. These provisions might also discourage a potential acquisition proposal or tender offer, even if the acquisition proposal or tender offer is at a premium over the then current market price for our common stock.



We are subject to significant corporate regulation as a public company and failure to comply with all applicable regulations could subject us to liability or negatively affect our stock price.



As a publicly traded company, we are subject to a significant body of regulation, including the Sarbanes Oxley Act of 2002. While we have developed and instituted a corporate compliance program based on what we believe are the current best practices in corporate governance, internal and disclosure controls and continue to update this program in response to newly implemented or changing regulatory requirements, we cannot provide assurance that we are or will be in compliance with all applicable regulations. If we fail to comply with any of these regulations, we could be subject to a range of regulatory actions, fines or other sanctions or litigation. As part of the review of our compliance program, we continually review and analyze our internal control over financial reporting for Sarbanes-Oxley Section 404 compliance. As part of that process we have and in the future may discover material weaknesses or significant deficiencies in our internal control as defined under standards adopted by the Public Company Accounting Oversight Board that require remediation. In connection with our year end audit, we identified a significant deficiency in our internal controls over financial reporting related to our failure to reflect an increase in potentially dilutive common stock equivalents that could be issued as a result of sales of our common stock under our at-the -market sales agreement priced below our series B preferred stock conversion rate.  This correction had no impact on any financial statement amounts or earnings per share. Any failure to maintain effective controls or timely effect any necessary improvement of our internal and disclosure controls could harm operating results or cause us to fail to meet our reporting obligations, which could affect our ability to remain listed with NYSE American. Ineffective internal and disclosure controls could also cause investors to lose confidence in our reported financial information, which would likely have a negative effect on the trading price of our securities.



Risks Related To Our Indebtedness



Our ABL Facility contains various covenants limiting the discretion of our management in operating our business, which could prevent us from capitalizing on business opportunities and taking some corporate actions.



Our ABL Facility imposes operating and financial restrictions on us. These restrictions limit or restrict, among other things, our ability to:



---

 



In addition, the ABL Facility also requires us to maintain compliance with certain financial covenants. Our ability to comply with these covenants may be affected by events beyond our control, including those described in this “Risk Factors” section. Any breach of any of the covenants contained in the ABL Facility could result in an event of default under one or more of the documents governing such obligations which would allow the lenders under the ABL Facility to prevent us from borrowing under the ABL Facility and/or declare all borrowings outstanding to be due and payable. Although relations with the lender under our ABL Facility are positive, there can be no assurance that the lender will grant a future covenant waiver or continue to lend to us at present availability levels, or at all. In the event of an acceleration of payment obligations under the ABL Facility, we may be unable to pay our outstanding indebtedness with our cash and cash equivalents then on hand. We could be required to seek alternative sources of funding, which may not be available on commercially reasonable terms, or terms as favorable as our current agreement or at all. If we are unable to provide alternative means of financing our operations, we may be required to reduce our operations or take other actions that are inconsistent with our current business practices or strategy.



Repayment of any outstanding indebtedness under our ABL Facility is dependent, and repayment of any future indebtedness we may incur, will be dependent upon our ability to generate cash from operations.



Our ability to make payments on our ABL Facility and to fund planned capital expenditures depends, and our ability to make payments on any additional future debt we may incur will depend, upon our ability to generate cash from our future operations. This, to a certain extent, is subject to financial, competitive, legislative, regulatory, and other factors that are beyond our control. In addition, if we cannot service the indebtedness under our ABL Facility, or any future indebtedness we may incur, we may have to take actions such as selling assets, raising additional capital or reducing or delaying capital expenditures, any of which could impede the implementation of our business strategy, prevent us from entering into transactions that would otherwise benefit our business and/or negatively affect our financial condition and results of operations.



Our ABL Facility matures on December 31, 2021 and there can be no assurance that we will be able to extend or renew the facility.



Our ABL Facility expires on December 31, 2021. While relations with the lender are positive, there is no assurance the lender will renew or extend this facility, or continue to make funds available during 2021 and beyond at present availability levels, or at all. We may not be able to refinance our indebtedness under our ABL Facility, or any future indebtedness we may incur, or take such other actions, if necessary, on commercially reasonable terms, or at all. Our ability to meet our obligations as they become due is dependent, in part, on our ability to borrow under our ABL Facility. If the ABL Facility is not renewed or extended it may impair our ability to continue current operations and to execute on our plans.



Our debt is variable rate debt, and increases in interest rates could adversely affect us by causing us to incur higher interest costs with respect to such variable rate debt.



The ABL Facility subjects us to interest rate risk. The rate at which we pay interest on amounts borrowed under such facility fluctuates with changes in interest rates. Accordingly, with respect to any amounts from time to time outstanding under the ABL Facility, we are and will be exposed to changes in interest rates. If we are unable to adequately manage our debt structure in response to changes in the market, our interest expense could increase, which would negatively affect our financial condition and results of operations. There were $1.9 million net outstanding borrowings under the ABL Facility as of December 31, 2020.



If Company loan is not forgiven under the Paycheck Protection Program, future payments will need to be made.



On June 8, 2020, the Company received a loan under the U.S. Small Business Administration’s, or SBA’s  Paycheck Protection Program, or PPP, from KeyBank National Association related to the COVID-19 crisis in the amount of $1.9 million.  Under the PPP loan, the loan has a fixed interest rate of 1% per annum, a maturity date two years from the date of the funding of the loan, and deferral of payments for six months. The Company used the proceeds for purposes consistent with the PPP, and filed an application for forgiveness with the SBA, in December 2020.  If forgiveness is not granted, future annual minimum loan payments as of December 31, 2020 would be $0.98 million and $0.98 million for 2021 and 2022, respectively.







Risks Related To Our Intellectual Property



We may not be successful in protecting our intellectual property and proprietary rights.



We rely on a combination of patents, trade secret protection, licensing agreements and other arrangements to establish and protect our proprietary technologies. If we fail to successfully enforce our intellectual property rights, our competitive position could suffer, which could harm our operating results. Patents may not be issued for our current patent applications; third parties may challenge, invalidate

---

 

or circumvent any patent issued to us; unauthorized parties could obtain and use information that we regard as proprietary despite our efforts to protect our proprietary rights; rights granted under patents issued to us may not afford us any competitive advantage; others may independently develop similar technology or design around our patents; and protection of our intellectual property rights may be limited in certain foreign countries. Any future infringement or other claims or prosecutions we may bring against third parties based on our intellectual property could have a material adverse effect on our business. Any such claims could be time consuming to assert, result in costly litigation, divert management’s attention and resources, or result in our entering into royalty or licensing agreements. Protection of intellectual property has historically been a large yearly expense for us. For a period prior to 2008, we were not in a financial position to properly protect all of our intellectual property, and may not be in a position to properly protect our position or stay ahead of competition in new research and the protecting of the resulting intellectual property. Some of our commercial agreements may limit our ability to enforce certain of our intellectual property rights against certain parties.



In addition to patent protection, we also rely on trade secrets and other non‑patented proprietary information relating to our product development and manufacturing activities. We try to protect this information through appropriate efforts to maintain its secrecy, including requiring employees and third parties to sign confidentiality agreements. We cannot be sure that these efforts will be successful or that the confidentiality agreements will not be breached. We also cannot be sure that we would have adequate remedies for any breach of such agreements or other misappropriation of our trade secrets or that our trade secrets and proprietary know‑how will not otherwise become known or be independently discovered by others.



We might incur intellectual property and technology risk by conducting business in certain foreign jurisdictions.



Conducting business in certain foreign jurisdictions might increase our risk of direct or indirect theft or compromise of our intellectual property. We rely on a combination of patents, trade secret protection, licensing agreements, and other arrangements to establish and protect our proprietary technologies. We cannot be sure that these efforts will be successful nor can we be sure that we have appropriate remedies for any breach.



Changes to the patent law in the United States could diminish the value of patents in general, thereby impairing our ability to protect our products.



Obtaining and enforcing our patents involves both technological and legal complexity and is therefore costly, time consuming and inherently uncertain. Patent reform legislation in the United States, including the Leahy-Smith America Invents Act, or the America Invents Act, could increase those uncertainties and costs. The America Invents Act was signed into law on September 16, 2011, and many of the substantive changes became effective on March 16, 2013. The America Invents Act reforms United States patent law in part by changing the U.S. patent system from a “first to invent” system to a “first inventor to file” system, expanding the definition of prior art, and developing a post-grant review system. This legislation changes United States patent law in a way that may weaken our ability to obtain patent protection in the United States for those applications filed after March 16, 2013.



Further, the America Invents Act created new procedures to challenge the validity of issued patents in the United States, including post-grant review and inter partes review proceedings, which some third parties have been using to cause the cancellation of selected or all claims of issued patents. For a patent with an effective filing date of March 16, 2013 or later, a petition for post-grant review can be filed by a third party in a nine-month window from issuance of the patent. A petition for inter partes review can be filed immediately following the issuance of a patent if the patent has an effective filing date prior to March 16, 2013. A petition for inter partes review can be filed after the nine-month period for filing a post-grant review petition has expired for a patent with an effective filing date of March 16, 2013 or later. Post-grant review proceedings can be brought on any ground of invalidity, whereas inter partes review proceedings can only raise an invalidity challenge based on published prior art and patents. In these adversarial actions, the U.S. Patent and Trademark Office or USPTO reviews patent claims without the presumption of validity afforded to U.S. patents in lawsuits in U.S. federal courts and uses a lower burden of proof than used in litigation in U.S. federal courts. Therefore, it is generally considered easier for a competitor or third party to have a U.S. patent invalidated in a USPTO post-grant review or inter partes review proceeding than invalidated in a litigation in a U.S. federal court. If any of our patents are challenged by a third party in such a USPTO proceeding, there is no guarantee that we will be successful in defending the patent, which could result in a loss of the challenged patent right to us.



Depending on future actions by the U.S. Congress, the U.S. courts and the USPTO, the laws and regulations governing U.S. patents could change in unpredictable ways that would weaken our ability to obtain new patents or to enforce our existing patents and patents that we might obtain in the future.



---

 

Third parties may assert claims against us which could harm our business.



We may face third party claims from competitors, non-practicing entities, and others that our business practices or products infringe adversely held intellectual property rights. We may face third party claims that our employees or contractors have misappropriated and unlawfully disclosed to us for our benefit third party trade secrets or other proprietary information. Furthermore, we have agreed to indemnify customers, licensees and partners for certain intellectual property claims brought against them. Defending any such claims, whether or not meritorious, would cause us to incur costs and may divert the attention of management and technical personnel. Resolution of any such claims by litigation or settlement may entail payment of damages, entry into license agreements, changes to our business practices or products, and changes in our relationships with our customers, employees, licensees, partners, or contractors.







Risks Related to Governmental, Legal or Regulatory Matters







Procurement of microdisplays for military systems is subject to changes in federal budget priorities and if government funding is discontinued or reduced, our ability to develop or enhance products could be limited and our business results, operations and financial conditions could be adversely affected.



Historically, a large portion of our revenue is from military contracts. Procurement of microdisplays for military systems is subject to changes in federal budget priorities. Government programs are subject to authorization, appropriation and allocation of funding on an annual basis. Additionally, funding can be shifted to other programs if the government changes budget priorities, such as in a time of war or for other reasons. Government contracts are also subject to the risk that the government may not appropriate and allocate all funding contemplated by the contract. Government contracts generally permit the contracting authority to terminate the contract for the convenience of the government and in the event of a premature termination of a contract, the full value of such contract will not be realized.



The research and development and product procurement contracts of the customers we supply may be similarly impacted by government budget decisions. If the government funding is discontinued or reduced, our ability to develop or enhance products could be limited and our business results, operations and financial conditions could be adversely affected.



In addition, we must comply with certain laws and regulations relating to the administration and performance of federal government contracts. These laws and regulations affect how we conduct business under our federal government contracts, including in our role as a subcontractor. In complying with these laws and regulations, we may incur additional costs, and non‑compliance may lead to the assessment of fines and penalties, including contractual damages or the loss of business.



If government agencies or companies discontinue or curtail their funding for our research and development programs, our business may suffer.



Changes in federal budget priorities could adversely affect our contract and display product revenue. Historically, U.S. government agencies have funded a significant part of our research and development activities. Our funding has the risk of being redirected to other programs when the government changes budget priorities, such as in time of war or for other reasons. Government contracts are also subject to the risk that the government agency may not appropriate and allocate all funding contemplated by the contract. In addition, our government contracts generally permit the contracting authority to terminate the contract for the convenience of the government. The full value of the contracts would not be realized if they were prematurely terminated. We may be unable to incur sufficient allowable costs to generate the full estimated contract values. Furthermore, the research and development and product procurement contracts of the customers we supply may be similarly impacted. If the government funding is discontinued or reduced, our ability to develop or enhance products could be limited and our business results or operations and financial conditions could be adversely affected.



We are subcontracted by certain prime contractors who obtain their military contracts through a request for proposal, or RFP, process, which is a competitive bidding process that involves unique risks that could materially reduce our revenues or profits.



Our customers include certain prime contractors who contract directly with the military and U.S. government agencies, and then subcontract certain of those contracts to us. These prime contractors customers obtain their military and government agency contracts through an RFP process, which typically involves intense competition and presents a number of risks that may not typically be present in the market, including the need to devote substantial time and attention of management and key employees to the preparation of a proposal that may not be accepted. The rules governing government purchasing typically require open bidding by possible providers against a list of requirements established under existing or specially created procedures, which results in significant pricing pressure in order to ensure a bid is competitive. This pricing pressure can lead our prime contractor customers to seek lower prices for our products and services, as a subcontractor, which could lead to lower margins than we may otherwise be able to obtain from other parties in the

---

 

market. Additional risks associated with RFPs which may impact the revenue we receive from our prime contractor customers include the ability of the U.S. government unilaterally to:





The rules governing RFPs also allow the U.S. government to terminate any of its contracts with our prime contractor customers, either for its convenience or if our customers default by failing to perform in accordance with the contract schedule and terms, and also allow our prime contractor customers to terminate their contracts with subcontractors, including our company, in the event of U.S. government terminations, or if we default by failing to perform. Termination-for-convenience provisions generally enable our customers to recover only costs incurred or committed, settlement expenses, and profit on the work completed prior to termination. Termination-for-default provisions do not permit these recoveries and would make our prime contractor customers liable for excess costs incurred by the government in procuring undelivered items from another source. These factors may reduce or eliminate our expected revenue from subcontracts with our prime contractor customers.



We may not be able to satisfy all of the conditions of the total of $39.1 million in U.S. governmental awards we received during 2020 for purchases of capital equipment over a three-year period.  The receipt of the significant amount of U.S. government awards we received during 2020 may impact the U.S. government’s decisions regarding future awards for capital equipment contracts for R&D development work we may apply for. As a result, our business and prospects may be adversely affected. Our customers and potential customers applying for government grants, incentives or loans may condition purchases of our products upon their receipt of these funds or delay purchases of our products until their receipt of these funds.



We have received a total of $39.1 million in awards under government programs designed specifically for microdisplay industry contractors and participants. We anticipate that in the future there will be new opportunities for us to apply for grants, incentives and other forms of funding from the United States government. Despite our position as the only U.S. commercial manufacturer of OLED microdisplays, there is a risk that future funding decisions, including awards of contracts for R&D development work may be influenced by political or other considerations that encompass the significant amount of awards we received during 2020. Our ability to obtain grants, incentives and other forms of funding from government sources is subject to the availability of funds under applicable government programs and approval of our applications to participate in such programs. The application process for these grants, incentives and other forms of funding is and will be highly competitive, often involving multiple levels of military and U.S. government approval before a grant or incentive can be approved and funds disbursed, each of which is subject to risk and uncertain timing.



Moreover, we may not be able to satisfy or continue to satisfy the requirements and milestones imposed by the granting authority as conditions to the receipt of the $39.1 million in awards we received during 2020. Some of these conditions include, improvements in yield, throughput and profitability, sourcing and installation of related equipment, and quarterly and annual reporting of progress and compliance with program terms.  In addition, not all of the terms and conditions associated with such funds have been finalized, and once disclosed, there may be terms and conditions with which we are unable to comply or which are commercially unacceptable to us. There is also a risk that the actual price of equipment purchased may exceed the amounts budgeted under the awards, which would require use of our resources. The U.S. government will retain title to approximately 80% of the equipment purchased under this multi-year program, until a determination of performance is made at the end of the program. The award agreements contain an obligation to prioritize U.S. Department of Defense related orders, as well as penalties if we do not continue to produce OLED microdisplays for five years past the end of the program.  Should the U.S. government retain title to our equipment at the end of the program, this could cause a disruption or limitation in our ability to operate.  In addition, conditions imposed by these government awards could limit our flexibility, or the desire of potential partners to engage in business combinations.



There is no assurance that any future applications we submit for grants, incentives or other forms of funding will ultimately be approved, and if approved, that approval and funding will occur within our desired timeframe or that we will be able to satisfy or continue to meet any ongoing requirements or milestones. If we are not successful in obtaining government grants or incentives and we are unable to find alternative sources of funding to meet our planned capital needs, our business and prospects could be materially adversely affected.



In addition, certain of our customers and potential customers that also apply for government grants, incentives or loans may condition purchases of our products and systems upon receipt of such funds or delay purchases of our products and systems until receipt of such funds, and if those customers and potential customers do not receive these funds or the receipt of these funds is significantly delayed, our results of operations could suffer.

---

 



Some of our business is subject to U.S. government procurement laws and regulations.



We must comply with certain laws and regulations relating to the formation, administration and performance of federal government contracts, including the EAR and the ITAR. These laws and regulations affect how we conduct business under our federal government contracts, including the business that we do as a subcontractor. In complying with these laws and regulations, we may incur additional costs, and non‑compliance may lead to the assessment of fines and penalties, including contractual damages, or the loss of business.



Our international sales and operations are subject to export laws and regulations.



We must comply with all applicable export control laws, including the EAR and ITAR. Certain of our products may be deemed to be controlled for export by the U.S. Commerce Department’s Bureau of Industry and Security under the EAR or by the DDTC under the ITAR. We believe certain of our products will be classified as defense articles and licenses from the DDTC will be required for exports. Failure to comply with these export control laws can lead to severe penalties, both civil and criminal, and can include debarment from contracting with the U.S. government.



We have recorded an impairment loss related to our decision to exit the consumer night vision products business, however there is a risk that additional losses may be incurred upon the final disposition or sale of this business.



We have various agreements and purchase orders in place with two contract manufacturers located in Asia for defined quantities of our consumer night vision products business that will no longer be fulfilled. In March 2019, we received a demand letter seeking payment of $0.9 million of outstanding invoices relating to purchased inventory from Suga Electronics Limited, or Suga, a contract manufacturer located in China, which manufactured product sold by our consumer night vision business. We have responded to the demand letter, and requested that Suga provide substantiation of purchased inventory. On August 1, 2019, we were notified by Suga that they intend to pursue arbitration. During September and October 2019, we held preliminary discussions with Suga to attempt to reach a settlement, however in November 2019 we received a formal request for arbitration which Suga filed with the International Chamber of Commerce or ICC. We retained local counsel in Hong Kong to represent it before the ICC and in December 2019 filed an answer to Suga’s request for arbitration including a counterclaim seeking repayment of amounts previously paid to Suga. An arbitrator has been appointed and arbitral proceedings for the consideration of the claims and counterclaims are expected to run through the second quarter of 2021. The parties are permitted to settle at any point during the arbitration proceedings.



As disclosed in the financial statements in our Annual Report on Form 10-K for the year ended December 31, 2018, we decided to exit the consumer night vision business and accrued approximately $1.0 million related to invoices received for inventory purchased by Suga in anticipation of future production. While we believe that we have adequately accrued for the losses and are in discussions to resolve related claims by the contract manufacturers, there is the risk that additional losses or litigation related expenses may be incurred above the amounts accrued for as of December 31, 2020, if we fail to resolve these claims in a timely and/or favorable manner.





Risks Related To Information Technology



We rely on our information technology systems to conduct our business. If we experience an interruption in our operation, our business and financial results could be adversely affected.



The efficient operation of our business is highly dependent on our information technology systems including our manufacturing equipment and process. If our information technology systems are damaged or an interruption is caused by a computer systems failure, viruses, fire, natural disasters, or power loss, the disruption to our normal business operations and impact on our costs, competitiveness, and financial results could be significant.



Security breaches and other disruptions could compromise our information technology systems and expose us to liability, which could cause our business and reputation to suffer.



In the ordinary course of our business, we will collect and store sensitive data on our systems and networks, including our proprietary business information and that of our customers and suppliers, and personally identifiable information of our customers and employees. The secure storage, processing, maintenance, and transmission of this information is critical to our operations. Despite the security measures we employ, our information technology systems and networks may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other disruptions. Any such breach could compromise such systems and networks and the information stored therein could be accessed, publicly disclosed and/or lost or stolen. Although we have cyber insurance coverage, any such access, disclosure or other loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information, disruption to our operations, damage to our reputation and/or loss of competitive position.







---

 

General Risks



Our success depends in large part on attracting and retaining highly skilled and qualified management, technical and consulting personnel.



We must recruit and hire highly skilled technical personnel as employees and as independent contractors in order to develop our products and to assist with servicing and upgrades to our equipment. The competition for skilled technical employees is intense and we may not be able to retain or recruit such personnel. We must compete with companies that possess greater financial and other resources than we do, and that may be more attractive to potential employees and contractors. To be competitive, we may have to increase the compensation, including salaries, bonuses, stock options and other fringe benefits, offered to employees in order to attract and retain such personnel. The costs of attracting and retaining new personnel may have a materially adverse effect on our business and our operating results.



Changes in management could have an adverse effect on our business. We are dependent upon the active participation of several key management personnel in our strategic planning and in our day-to-day business operations. We also need to recruit additional management in order to expand our business. The failure to attract and retain additional management or personnel could have a material adverse effect on our operating results and financial performance.



Due to our limited resources, if we are unable to retain our key employees, we may not be able to effectively manage our operations or timely replace qualified personnel, which may result in weaknesses in operations, further loss of employees and/or reduced productivity among remaining employees.



Economic conditions may adversely impact our business, operating results and financial condition.



Economic conditions and market instability may affect our customers and suppliers. Any adverse financial or economic impact to our customers may impact their ability to pay timely, or result in their inability to pay. It may also impact their ability to fund future purchases, or increase the sales cycles which could lead to a reduction in revenue and accounts receivable. Our suppliers may increase their prices or may be unable to supply needed raw materials on a timely basis which could result in our inability to meet customers’ demand or affect our gross margins. Our suppliers may also impose more stringent payment terms on us. The timing and nature of any recovery in the credit and financial markets remains uncertain, and there can be no assurance that market conditions will improve in the near future or that our results will not be materially and adversely affected.



Our business depends on international transactions.



We purchase materials from and subcontract manufacturing processes to companies located abroad and may be adversely affected by political and currency risk, as well as the additional costs of doing business with foreign entities. In addition, 44% of our sales were to OEMs outside the United States in fiscal 2020 and 2019, respectively. These sales expose us to currency and political risk. In addition, some of our non-U.S. customers have longer receivable periods as is customary in those countries.

 

Our business may expose us to product liability claims.



Our business may expose us to potential product liability claims. We may face liability to product users for damages resulting from the faulty design or manufacture of our products. While we maintain product liability insurance coverage, there can be no assurance that product liability claims will not exceed coverage limits, fall outside the scope of such coverage, or that such insurance will continue to be available at commercially reasonable rates, if at all.



Our reported financial results may be adversely affected by changes in accounting principles generally accepted in the United States.



GAAP are subject to interpretation by the Financial Accounting Standards Board, or FASB, the United States Securities and Exchange Commission, or the SEC, and various bodies formed to promulgate and interpret appropriate accounting principles. A change in these principles or interpretations could have a significant effect on our reported financial results for periods prior and subsequent to such change. The adoption of new standards may require enhancements or changes in our systems and will continue to require significant time and effort of our financial management team.  We cannot predict the impact of all of the future changes to accounting principles or our accounting policies on our consolidated financial statements going forward, which could have a significant effect on our reported financial results, and could affect the reporting of transactions completed before the announcement of the change. In addition, if we were to change our critical accounting estimates, including those related to inventory, contract revenue and other revenue sources, our operating results could be significantly affected.



---

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

 

Not applicable.



ITEM 2. PROPERTIES

 

Our manufacturing facility and corporate headquarters are located in Hopewell Junction, NY, where we lease approximately 63,000 square feet. The NY facility houses our equipment for OLED microdisplay fabrication, assembly operations, research and development, and product development functions. In November 2020, we entered into a new ten-year lease expanding our footprint from approximately 50,000 to 63,000 square feet, including an additional 8,000 square foot of space to be used as a class 10 clean room and additional storage space. The lease expires in 2031. Additionally, we have two five-year options to extend the lease as part of this agreement. We lease approximately 2,000 square feet of office space for design and product development in Santa Clara, CA and the lease expires in 2021.



We believe our facilities are adequate for our current and near-term needs. We believe we will be able to renew these leases or obtain alternative spaces or additional spaces as necessary under acceptable terms. See Note 10 to the Consolidated Financial Statements for more information about our lease commitments.



ITEM 3. LEGAL PROCEEDINGS



From time to time, we may become subject to various legal proceedings that are incidental to the ordinary conduct of our business. In March 2019, we received a demand letter seeking payment of $0.9 million of outstanding invoices relating to purchased inventory from Suga Electronics Limited, or Suga, a contract manufacturer located in China, which manufactured product sold by our consumer night vision business. We have responded to the demand letter, and requested that Suga provide substantiation of purchased inventory. On August 1, 2019 we were notified by Suga that they intend to pursue arbitration. During September and October 2019, we held preliminary discussions with Suga to attempt to reach a settlement, however in November 2019 we received a formal request for arbitration which Suga filed with the International Chamber of Commerce or ICC. We retained local counsel in Hong Kong to represent it before the ICC and in December 2019 filed an answer to Suga’s request for arbitration including a counterclaim seeking repayment of amounts previously paid to Suga. An arbitrator has been appointed and arbitral proceedings for the consideration of the claims and counterclaims are expected to run through the second quarter of 2021. The parties are permitted to settle at any point during the arbitration proceedings.



As disclosed in the financial statements in our Annual Report on Form 10-K for the year ended December 31, 2018, we decided to exit the consumer night vision business and accrued approximately $1.0 million related to invoices received for inventory purchased by Suga in anticipation of future production. While we believe that we have adequately accrued for the losses and are in discussions to resolve related claims by the contract manufacturers, there is the risk that additional losses or litigation related expenses may be incurred above the amounts accrued for as of December 31, 2020, if we fail to resolve these claims in a timely and/or favorable manner.



ITEM 4. MINE SAFETY DISCLOSURES

 

Not applicable.

---

 

PART II

 

ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES



Our common stock trades on the NYSE American under the symbol “EMAN”.





As of December 31, 2020, there were 140 holders of record of our common stock. This does not include persons whose stock is in nominee or “street name” accounts through brokers.



Dividends

 

There were no declared dividends in 2020 and 2019.   Our ABL Facility restricts us from paying cash dividends while any obligations are outstanding under the facility. Subject to this restriction, any future decisions to pay cash dividends will be at the discretion of our Board of Directors. It is our current intention to retain any future profits for use in the development and expansion of our business and for general corporate purposes.



Securities Authorized for Issuance under Equity Compensation Plans



Information about our equity compensation plans is incorporated herein by reference to Part IV, Note 14 of this Annual Report.



Purchases of Equity Securities by the Issuer

 

There were no repurchases of our common stock during the year ended December 31, 2020.

 

---

 

ITEM 6. SELECTED FINANCIAL DATA

 

Not applicable.



ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Introduction

 

The following discussion should be read in conjunction with our financial statements and notes thereto. Our fiscal year ends December 31. This Report contains certain forward‑looking statements including, among others, anticipated trends in our financial condition and results of operations and our business strategy. These forward‑looking statements are based largely on our current expectations and are subject to a number of risks and uncertainties. Please see “Statement Regarding Forward-Looking Statements” and Part I, Item 1A, "Risk Factors". Actual results could differ materially from these forward‑looking statements. Important factors to consider in evaluating such forward‑looking statements include changes in external factors or in our internal budgeting process which might impact trends in our results of operations; unanticipated working capital or other cash requirements; changes in our business strategy or an inability to execute our strategy due to unanticipated changes in the industries in which we operate; and various competitive market factors that may prevent us from competing successfully in the marketplace. Forward-looking statements do not represent our views as of any date other than the date of this Report.



Business



We design, develop, manufacture and market organic light emitting diode, or OLED miniature displays, which we refer to as OLED-on-silicon microdisplays, virtual imaging products that utilize OLED microdisplays, and related products. We also perform research in the OLED field. Our virtual imaging products integrate OLED technology with silicon chips to produce high-resolution microdisplays which, when viewed through a magnifying headset, create virtual images that appear comparable in size to that of a computer monitor or a large‑screen television. Our products enable our original equipment manufacturer, or OEM, customers in the military and commercial markets to develop and market improved or new electronic products.



We believe that our OLED microdisplays offer a number of significant advantages over comparable liquid crystal microdisplays, including higher contrast, greater power efficiency, less weight, more compact size, and negligible image smearing. Using our active matrix OLED technology, many computer and electronic system functions can be built directly into the OLED microdisplays silicon backplane, resulting in compact, high resolution and power efficient systems. Already proven in military and commercial systems, our product portfolio of OLED microdisplays deliver high‑resolution, virtual images that perform effectively even in extreme temperatures and high‑vibration conditions.



We have been deemed to be an essential business in the State of New York and have continued to produce and ship products during the COVID-19 pandemic. We have implemented employee health and safety measures per Centers for Disease Control and Prevention, or CDC, guidelines, including mandating use of personal protective equipment, employee temperature checking, daily location tracking and employee surveys, observing social distancing guidelines and enhanced facility cleaning. We continue to supply products to our customers as well as maintain continuity in our supply chain and expect to continue our operations throughout the duration of the pandemic and beyond. To date we have experienced disruptions in supply, had several employees test positive for the COVID-19 virus and had to close our facilities for cleaning purposes. There is no assurance that our operations will not be disrupted in the future by additional impacts of the COVID-19 virus or resurgences, on either our internal operations or those of our suppliers or customers, including the possible impact on state or international quarantine requirements on shipments or vendor support personnel. In addition, please review the various risk factors relating to the COVID-19 pandemic discussed in Part II, Item 1A of this Report.



Operating expenses for 2020, including R&D expenses, increased approximately $1.0 million compared to 2019. The majority of the increase was due to higher legal costs and investments in R&D expenses for company-funded work related to our high-brightness dPd product and XLE process development, along with resources expended on improving manufacturing processes



---

 



We are continually making improvements in production processes, however the majority of our equipment is older and malfunctions in single point of failure equipment has the potential to delay our production until repairs can be made. We experienced equipment issues in 2019, and recently experienced some equipment issues during 2020, and also had delays in getting vendor support personnel due to COVID-19 travel restrictions. Equipment to be purchased during fiscal 2021 and 2022 under our government awards programs is expected to reduce our single point of failure risk and improve manufacturing yields and throughput. We are in the process of implementing some of the processes from our yield improvement efforts and we have initiated an effort to explore an overall productivity improvement in the operations area that we believe has the potential to improve our results of operations. Our backlog at December 31, 2020 was $10.9 million compared to backlog of $11.7 million at December 31, 2019.



We believe that our U.S.-based design and manufacturing, combined with in-house advanced backplane design, and our dPd technology give us a competitive advantage. Our direct patterning equipment is operational. We have fabricated full color displays using the newly upgraded and installed dPd tool in the second quarter and shipped small quantities to customers in the second half of 2020.



We received a validation of our products and technology during fiscal 2020 from the U.S. government. In the past two quarters, we received two Department of Defense awards totaling $39.1 million.  We believe we are the only U.S. manufacturer of OLED microdisplays and our displays are used in many U.S. Military programs.



Consumer, medical, and military customers are increasingly turning to us because of our technological leadership in display brightness and resolution. This leadership in brightness is further demonstrated by our proprietary dPd capability. Unlike traditional OLEDs that produce colors by using a white source with filters that eliminate about 80% of the emitted light, with dPd, we make full color displays by directly depositing each of the primary color materials on respective sub-pixels, without the use of filters. This advanced technology gives us an increase in brightness of over 10X versus the competition and we are close to achieving 10,000 cd/m2 and expect to achieve a brightness level of over 28,000 cd/m2 ready for mass production of full color displays by 2023. We achieved the highest monochrome brightness levels in the market years ago and are continuing our leadership with color displays. Display brightness is critical for AR/VR devices because of optics inefficiency and the need to eliminate motion artifacts. This is especially important for heads up  displays  used in bright, daylight environments.

 

Liquidity and Going Concern



The accompanying consolidated financial statements have been prepared on the going concern basis, which assumes we will continue to operate as a going concern and which contemplates the realization of assets and the satisfaction of liabilities and commitments in the normal course of business. However, due to continuing losses, uncertainty regarding the COVID-19 pandemic, our financial position, and uncertainty regarding our ability to borrow under the ABL Facility, and the expiration of our at At The Market (“ATM”) facility in July 2020 when the remaining amount available under the facility was used, we may not be able to meet our financial obligations as they become due without additional financing or sources of capital.



The pandemic has significantly increased economic and demand uncertainty. It is possible that the current outbreak and continued spread of COVID-19, including any vaccine resistant strains, or any resurgence will cause the economic slowdown to continue, and it is possible that it could cause a global recession. Although vaccines are becoming more widely available, here is a significant degree of uncertainty and lack of visibility as to the extent and duration of the pandemic and related slowdowns or economic trends. If either were prolonged, demand for our products will be significantly harmed. Although many jurisdictions are now open with social distancing measures implemented to curtail the spread of COVID-19, but we cannot predict the length of time that it will take for any meaningful economic recovery to take place. We also cannot predict whether vaccine resistant strains will lead to additional surges in new cases of COVID-19, or the severity of such surges if/when they occur, such that governmental authorities decide to reimpose quarantines, lockdowns or travel restrictions, which could further materially and adversely affect our results and financial condition.



Our common stock is listed on the NYSE American, and we are subject to its continued listing requirements, including maintaining certain share prices and a minimum amount of shareholder’s equity. If we are unable to comply with the NYSE American continued listing requirements, including its trading price requirements, our common stock may be suspended from trading on and/or delisted from the NYSE American.



---

 

Results of Operations



Year Ended December 31, 2020 Compared to Year Ended December 31, 2019 (dollars in thousands)

 

Revenues





Revenues increased $2.7 million to $29.4 million for the year ended December 31, 2020 compared to 26.7 million for the year ended December 31, 2019, representing a 10% increase.  



Product revenues are comprised primarily of sales of displays as well as sales of other components. In 2020, product revenues increased $0.5 million to $25.0 million for the year ended December 31, 2020 from revenues of $24.6 million for the year ended December 31, 2019, representing a 2% increase. The increase in product revenues in 2020 was primarily due to timing of orders from large defense contractors. Revenues in 2019 were impacted by manufacturing challenges that began in the fourth quarter of 2018, which affected yields and throughput and resulted in lower than planned shipments. These challenges continued during the first six months of 2019 but were resolved in the third quarter, resulting in increased revenues during the last six months of 2019.



Contract revenues are comprised of revenues from research and development, or R&D, and non-recurring engineering or NRE contracts. In 2020, contract revenues increased $2.2 million to $4.4 million for the year ended December 31, 2020 from revenues of $2.1 million for the year ended December 31, 2019, representing a 105% increase.  Higher contract revenues of $4.4 million in 2020 primarily reflected development work for a tier-one consumer company for an advanced display design and proof of concept for a consumer AR/VR device, which work is ongoing through 2021. The work with this customer is currently in the development and proof of concept stages. If this customer were to terminate its development process with us, our business and operating results could be adversely affected. 



Cost of Revenues 

 







Total cost of revenues is comprised of costs of product revenues and contract revenues. Cost of product revenue includes materials, labor and manufacturing overhead, warranty costs and depreciation related to our products. Cost of contract revenue includes direct and allocated indirect costs associated with performance on the contracts, primarily engineering resources and materials. Total cost of revenues increased by $3.1 million to $23.1 million for the year ended December 31, 2020 from $20.0 million for the year ended December 31, 2019.



Total cost of revenues as a percentage of revenues was 78% and 75%, respectively, for the years ended December 31, 2020 and 2019.  



The following table outlines product, contract and total gross profit and related gross margins for the years ended December 31, 2020 and 2019 (dollars in thousands):







Total gross profit is a function of revenues less cost of revenues. In fiscal 2020, total gross profit decreased approximately $0.4 million 

---

 

or 5% from gross profit of $6.7 million in fiscal 2019. Total gross margin was 22% for the fiscal year ended December 31, 2020,   down from 25% for the year ended December 31, 2019.  Gross margin for 2020 was impacted by issues related to the COVID-19 pandemic, including employee absences, stricter cleaning requirements, and longer than normal repair times as a result of travel restrictions for vendor personnel. Additionally, a key organic deposition tool was offline due to a scheduled overhaul.



Contract gross margin is dependent upon the mix of internal versus external third-party costs and materials, and the proportion of military and commercial revenues. For the year ended December 31, 2020, contract revenue gross profit was $2.4 million compared to $0.9 million for the prior year period. The increase in contract revenue gross profit for the year ended December 31, 2020 was primarily due to increased, higher margin consumer contract revenues during 2020. 



Operating Expenses







Research and Development Expenses



R&D expenses are company funded and are primarily comprised of salaries and related benefits, development materials and other costs specifically allocated to the development of new microdisplay products, OLED technologies and production processes. R&D expenses for the year ended December 31, 2020 were $5.7 million as compared to $5.0 million for the year ended December 31, 2019, an increase of $0.7 million. The increase in R&D costs during 2020 reflects investments in company-funded work related to our high-brightness dPd product and XLE process development, along with resources expended on improving manufacturing processes. 

 

Selling, General and Administrative Expenses



Selling, general and administrative expenses, or SG&A expenses, consist primarily of personnel expenses, professional services fees, as well as other marketing, general corporate and administrative expenses. SG&A expenses for the year ended December 31, 2020 were $7.6 million as compared to $7.3 million for the year ended December 31, 2019, an increase of approximately $0.3 million.  The increase was primarily due to higher spending on professional services and legal fees related to negotiations with prospective consumer electronics, volume manufacturer partners and arbitration of a dispute with a former contract manufacturer, offset by lower senior management salary expenses in 2020 due to the impact of the work status reduction adopted in October 2019.



Other Income (Expense) 



Other income (expense), net primarily consists of changes in the fair value of a warrant liability as well as interest expense and interest income on cash balances. Other expense for the year ended December 31, 2020 was $4.5 million compared to other income of $1.3 million for the year ended December 31, 2019.



Expense related to the change in fair value of warrant liability was $4.6 million for the year ended December 31, 2020 as compared to income of $1.5 million for the year ended December 31, 2019. This expense in fiscal year 2020 is associated with the increase of a liability related to registered warrants issued in May 2017 and January 2018, and the income in fiscal 2019 is associated with decreases in this liability. We are required to revalue warrants classified on our balance sheet as a liability at the end of each reporting period and reflect a gain or loss from the change in fair value in the period in which the change occurred. We calculate the fair value of the warrants outstanding using the Black-Scholes model.



In addition, during 2020 we recognized other income of $0.1 million related to deferred income and capitalization of internal costs related to equipment purchased under our government awards. 



Other expense for the year December 31, 2020 reflects net interest expense of $0.1 million as compared to net interest expense of $0.2 million for the year ended December 31, 2019.  These amounts represent interest expense on our borrowing under our ABL Facility.



Income Tax Expense (Benefit)



For the years ended December 31, 2020 and 2019, we had no income tax expense. We have a full valuation allowance as we recognize 

---

 

the effect of income tax positions, which are more-likely-than-not of being sustained. We have determined that it was not likely that we will generate sufficient future taxable income to realize the deferred tax assets.



Net Loss 



As a result of the above, net loss was approximately $11.4 million and $4.3 million for the fiscal years ended December 31, 2020 and 2019, respectively.



Off-Balance Sheet Arrangements

 

We have no off-balance sheet arrangements that are expected to have a current or future effect on our financial condition, revenues, results of operations, liquidity or capital expenditures.



Liquidity and Capital Resources 

 

As of December 31, 2020, we had $8.3 million of cash, cash equivalents, working capital of $12.1 million and borrowing outstanding and borrowing availability under the ABL Facility of $1.9 million and $2.1 million, respectively. In addition, we have $1.9 million outstanding under a PPP loan, see below, which may be forgiven if the loan is used for eligible expenses and meets PPP criteria for forgiveness. This is in comparison with $3.5 million in cash, working capital $8.8 million and borrowings outstanding and borrowing availability under the ABL Facility of $ 2.9 million and $1.2 million December 31, 2019. The $4.8 million increase in cash was primarily due to cash used in operating activities of $4.9 million and investing activities of $2.5 million, offset by cash provided by financing activities of $14.3 million.



On June 11, 2020, we were granted a $5.5 million award from IBAS. We received these funds for procurement and installation of capital equipment in our NY-based manufacturing facility. This award will be managed under the Cornerstone Other Transaction Authority, or Cornerstone OTA, and fully funds Phase I of a three-phase agreement. This award was created to focus on strengthening the U.S. Manufacturing and Defense Industrial Base. The release of funds to us began in August 2020 in accordance with down payments and progress payment schedules of the various capital equipment vendors.



On July 28, 2020, we received a $33.6 million award for the purchase of capital equipment over the next 33 months from the U.S. Department of Defense to sustain and enhance U.S. domestic capability for high resolution, high brightness OLED microdisplays that will be based on the Company’s proprietary direct patterning technology (“dPd”). This investment is in addition to the $5.5 million award announced on June 11, 2020, under the IBAS Program for OLED Supply Chain Assurance and will be used to increase capacity and sustain operations at eMagin’s Hopewell Junction, New York headquarters.



During 2020, the Company used $1.4 million of funds received to make down payments on equipment.



On June 8, 2020, the Company received a PPP loan from KeyBank National Association related to the COVID-19 crisis in the amount of $1.9 million. The PPP loan has a fixed interest rate of 1% per annum, a maturity date two years from the date of the funding of the loan, and deferral of payments for first six months. Pursuant to the terms of the loan, we may apply for forgiveness for an amount equal to the sum of the following costs incurred by us during period beginning on the date of first disbursement of the loan and ending on the earlier of (a) the date that is 24 weeks after the date of funding or (b) December 31, 2020, payroll costs, any payment of interest on a covered mortgage obligation, payment on a covered rent obligation, and any covered utility payment. The amount of loan forgiveness shall be calculated in accordance with the requirements of the PPP, including the provisions of Section 1106 of the Coronavirus Aid, Relief, and Economic Security Act, or CARES Act, although no more than 40% of the amount forgiven can be attributable to non-payroll costs. We have used the proceeds for purposes consistent with the PPP and filed an application for forgiveness with the Small Business Administration in December 2020. While we believe that our use of the loan proceeds will meet the conditions for forgiveness of the loan, we cannot assure you that we will not take actions that could cause us to be ineligible for forgiveness of the loan, in whole or in part.



For the year ended December 31, 2020, cash used by operating activities were $4.9 million, which was attributable to our net loss of $11.4 million and changes in operating assets and liabilities of $(1.0) million partially offset by net non-cash expenses of $7.6 million. For the year ended December 31, 2019, cash used by operating activities were $5.1 million, which was primarily attributable to our net loss of $4.3 million and the effect of net non-cash expenses and changes in operating assets and liabilities.



For the years ended December 31, 2020 and 2019, cash used by investing activities were $2.5 million and $1.1 million, respectively, primarily due to less equipment purchases for upgrading and expanding the capacity of our production line during 2020.



For the year ended December 31, 2020, cash provided by financing activities were $14.3 million of which $9.8 million were from the net proceeds from a public offering and associated private placement of our common stock offset by the repayment of $1.0 million in borrowings under our ABL Facility. For the year ended December 31, 2019, cash provided by financing activities were $6.4 million of

---

 

which $3.5 million were from the net proceeds from a public offering and associated private placement of our common stock and $2.9 million in net borrowings under our ABL Facility.



Going Concern



The accompanying consolidated financial statements have been prepared on a going concern basis, which assumes that we will continue to operate as a going concern and which contemplates the realization of assets and the satisfaction of liabilities and commitments in the normal course of business.



The pandemic has significantly increased economic and demand uncertainty. It is possible that the current outbreak and continued spread of COVID-19, including any vaccine resistant strains, or any resurgence will cause the economic slowdown to continue, and it is possible that it could cause a global recession. Although vaccines are becoming more widely available, here is a significant degree of uncertainty and lack of visibility as to the extent and duration of the pandemic and related slowdowns or economic trends. If either were prolonged, demand for our products will be significantly harmed. Although many jurisdictions are now open with social distancing measures implemented to curtail the spread of COVID-19, but we cannot predict the length of time that it will take for any meaningful economic recovery to take place. We also cannot predict whether vaccine resistant strains will lead to additional surges in new cases of COVID-19, or the severity of such surges if/when they occur, such that governmental authorities decide to reimpose quarantines, lockdowns or travel restrictions, which could further materially and adversely affect our results and financial condition.



Due to continuing losses, the COVID-19 pandemic, uncertainty regarding our need or ability to borrow under our ABL Facility, and the expiration of the Company’s ATM facility in July 2020 when the remaining amount available under the facility was used, the Company may not be able to meet our financial obligations as they become due without additional financing or sources of capital. Therefore, in accordance with applicable accounting guidance, and based on the Company’s current financial condition and availability of funds, there is substantial doubt about the Company’s ability to continue as a going concern through twelve months from the date these financial statements were issued.



We have taken actions to increase revenues and to reduce expenses and is considering financing alternatives. In addition, during the year ended December 31, 2020, we borrowed $1.9 million under the PPP loan program and raised $9.8 million of funds under our ATM Facility. Our plans with regard to these matters include the following actions:





We are reassessing our business plan and forecasts over the next two years. Based on our known cash needs as of February 2021, and the anticipated availability of its ABL facility, we have developed plans to extend our liquidity to support its working capital requirements through the first quarter of 2022. However, there can be no assurance our plans will be achieved, or that we  will be able to continue to borrow under its ABL Facility, mitigate the impacts of COVID-19, secure additional financing, and/or pursue strategic alternatives on terms acceptable to the Company, or at all.



In addition, even if we successfully generate additional funds through the sale of additional equity securities, borrowings or alternative financing, there can be no assurances that the revenue or capital infusion will be sufficient to enable us to develop our business to a level where it will be profitable or generate positive cash flow. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we incur additional debt, a substantial portion of its operating cash flow may be dedicated to the payment of principal and interest on such indebtedness, thus limiting funds available for our operational business activities. The terms of any debt securities issued could also impose significant restrictions on our operations. In addition, broad market and industry factors may seriously harm the market price of our common stock, regardless of its operating performance, and may adversely impact its ability to raise additional funds.



Equity Raises



On November 22, 2019, we entered into an ATM offering agreement with H.C. Wainwright & Co., LLC or Wainwright relating to shares of our common stock.  On June 10, 2020, we filed a prospectus supplement to update and amend the aggregate amount of shares we could sell pursuant to the ATM agreement.



During 2020, we raised $9.8 million, net of offering expenses, through the sale of shares under the ATM facility which represented the remaining amount available under the facility. We used and intend to use the net proceeds from sales made under the ATM offering for

---

 

working capital and other general corporate purposes.



ABL Facility



On December 21, 2016, we entered into an asset based revolving credit facility with a lender that provides for up to a maximum amount of $5 million based on a borrowing base equivalent of 85% of eligible accounts receivable plus the lesser of $2 million or 50% of eligible inventory. The interest on the ABL Facility is equal to the Prime Rate plus 3% but may not be less than 6.5% with a minimum monthly interest payment of $2,000. We are obligated to pay the lender a monthly administrative fee of $1,000 and an annual facility fee equal to 1% of the maximum amount borrowable under the facility.



The ABL Facility renewed on December 31, 2020 and will automatically renew on December 31, 2021 for a one-year term unless written notice to terminate the Financing Agreement is provided by either party.

 

The ABL Facility is secured by a lien on all receivables, property and the proceeds thereof, credit insurance policies and other insurance relating to the collateral, books, records and other general intangibles, inventory and equipment, proceeds of the collateral and accounts, instruments, chattel paper, and documents. The ABL Facility contains customary representations and warranties, affirmative and negative covenants and events of default, including a provision that we maintain a minimum tangible net worth of $13 million and a minimum working capital balance of $4 million. As of December 31, 2020, there were $1.9 million net borrowings outstanding under the Financing Agreement, the interest rate was 6.5% and had unused borrowing availability of $2.1 million. We were in compliance with all financial debt covenants as of December 31, 2020.



Change in Control Agreements



The Company entered into change in control agreements with certain of its executive officers, non-executive officers and managers. The agreements specify various employment-related matters, including annual compensation, performance incentive bonuses, and severance benefits in the event of termination with or without cause.



Dividends



In the years ended December 31, 2020 and 2019, no dividends were declared or paid. It is our intention to retain any future profits for use in the development and expansion of our business and for general corporate purposes. Future decisions to pay cash dividends are at the discretion of our Board of Directors.



Critical Accounting Policies

 

The SEC defines "critical accounting policies" as those that require application of management's most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain and may change in subsequent periods. Not all of the accounting policies require management to make difficult, subjective or complex judgments or estimates. However, the following policies could be deemed to be critical within the SEC definition.



Revenue and Cost Recognition

 

All of our revenues are earned from contracts with customers and are classified as either product or contract revenues. Contracts include written agreements and purchase orders, as well as arrangements that are implied by customary practices or law.



Product revenue is generated primarily from contracts to produce, ship and deliver OLED microdisplays. Our performance obligations are satisfied, control of our products is transferred, and revenue is recognized at a single point in time when control transfers to our customer for product shipped. Our customary terms are FOB our factory and control is deemed to transfer upon shipment. Shipping and other transportation costs charged to customers are treated as fulfillment activities and are recorded in both revenue and cost of sales at the time control is transferred to the customer. As customers are invoiced at the time control transfers and the right to consideration is unconditional at that time, we do not maintain contract asset balances for product revenue. Additionally, we do not maintain contract liability balances for product revenues, as performance obligations are satisfied prior to customer payment for product. We offer generally a one-year product warranty, for replacement of product only, and do not allow returns. We offer industry standard payment terms that typically require payment from our customers from 30 to 60 days after title transfer.



We also recognize revenues under the over-time method from certain R&D activities (contract revenues) under both firm fixed-price contracts and cost-type contracts. Progress and revenues from research and development activities relating to firm fixed-price contracts and cost-type contracts are generally recognized on an input method of accounting as costs are incurred. Under the input method, revenue is recognized based on efforts expended to date (e.g., the costs of resources consumed or labor hours worked, or machine hours used) relative to total efforts intended to be expended. Contract costs include all direct material, labor and subcontractor costs and an allocation of allowable indirect costs as defined by each contract, as periodically adjusted to reflect revised agreed upon rates. These rates are subject to audit by the other party. Any changes in estimate related to contract accounting are accounted for prospectively over the

---

 

remaining life of the contract. Under the over-time method, billings may not correlate directly to the revenue recognized. Based upon the terms of the specific contract, billings may be in excess of the revenue recognized, in which case the amounts are included in deferred revenues as a liability on the consolidated balance sheets. Likewise, revenue recognized may exceed customer billings in which case the amounts are reported as unbilled receivables. Unbilled revenues are expected to be billed and collected within one year. The incidental costs related to obtaining product sales contracts are non-recoverable from customers; and accordingly, are expensed as incurred.

 

Product Warranty

 

We offer generally a one-year product replacement warranty. In general, our standard policy is to repair or replace the defective products. We accrue for estimated returns of defective products at the time revenue is recognized based on historical activity as well as for specific known product issues. The determination of these accruals requires us to make estimates of the frequency and extent of warranty activity and estimate future costs to replace the products under warranty. If the actual warranty activity and/or repair and replacement costs differ significantly from these estimates, adjustments to cost of revenue may be required in future periods.

 

Inventory Valuation



Inventories are stated on a standard cost basis adjusted to approximate the lower of cost (as determined by the first-in, first-out method) or net realizable value. Cost includes materials, labor, and manufacturing overhead related to the production of OLED displays. The standard cost for our products is subject to fluctuation from quarter to quarter, depending primarily on the number of displays produced, fluctuations in manufacturing overhead and labor hours incurred, and the yields experienced in the manufacturing process. We regularly reviews inventory quantities on hand, future purchase commitments with our suppliers, and the estimated utility of the inventory. If our review indicates a reduction in utility below carrying value, the inventory is reduced to a new cost basis.



Leases 



We account for leases in accordance with ASC Topic 842: Leases, which we adopted on January 1, 2019. As a lessee, we record a right-of-use asset and a lease liability on the Consolidated Balance Sheet for all leases with terms longer than 12 months. Leases are classified as either finance or operating, with classification affecting the pattern of expense recognition in the Consolidated Statement of Operations.



Right-of-use assets represent our right to use an underlying asset for the lease term and lease liabilities represent our obligation to make lease payments arising from the lease. Lease right-of-use assets and liabilities are recognized at commencement date based on the present value of lease payments over the lease term. As most of our leases do not provide an implicit rate, we use our incremental borrowing rate based on the information available at commencement date in determining the present value of lease payments, and use the implicit rate when readily determinable. We estimate our incremental borrowing rate based on a yield curve analysis, utilizing the interest rate derived from the fair value analysis of our credit facility and adjusting it for factors that appropriately reflect the profile of secured borrowing over the expected term of the lease.  Some of our leases include the option to extend or terminate the lease. We include these options in the recognition of our right-of-use assets and lease liabilities when it is reasonably certain that we will exercise the option. Lease expense is generally recognized on a straight-line basis over the lease term.



We enter into lease agreements for the use of office space, manufacturing facilities, and phone equipment, under both operating and finance leases. Operating leases are included in Operating lease right-of-use assets, Operating lease liability – current and, Operating lease liability – long term in our Consolidated Balance Sheet. Finance leases are included in Property, plant and equipment, net, Finance lease liability – current and Finance lease liability – long term in our Consolidated Balance Sheet.  



Fair Value of Financial Instruments 

 

Our cash, cash equivalents, accounts receivable, short-term investments, accounts payable are stated at cost which approximates fair value due to the short-term nature of these instruments. The fair value of our ABL Facility approximates our carrying value because the interest rate moves with a market-based rate plus a margin. The fair value of the liability for common stock purchase warrants is estimated using the Black Scholes option pricing model based on the market value of the underlying common stock at the measurement date, the contractual term of the warrant, risk-free interest rates, expected dividends and expected volatility of the price of the underlying common stock.



The PPP loan is presented on the balance sheet, at cost which equals fair market value due to the loan’s short-term maturity, as the current portion of long-term debt, and long-term payables based upon the schedule of repayments and excluding any possible forgiveness of the loans.



Stock-based Compensation



We account for the measurement and recognition of compensation expense for all share-based payment awards made to employees and directors by estimating the fair value of stock awards at the date of grant using the Black-Scholes option valuation model. Stock-based

---

 

compensation expense is reduced for estimated forfeitures and is amortized over the vesting period using the straight-line method. See Note 14 of the Consolidated Financial Statements- Stock Compensation for a further discussion on stock-based compensation.



Derivative Financial Instruments



We evaluate all of our financial instruments, including issued stock purchase warrants, to determine if such instruments are derivatives or contain features qualifying as embedded derivatives. For derivative financial instruments accounted for as liabilities, the derivative instrument is initially recorded at its fair value and is then re-valued at each reporting date, with changes in the fair value reported in the consolidated statement of operations. We use the Black-Scholes option-pricing model to value the derivative instruments at inception and subsequent valuation dates. The classification of derivative instruments, including whether such instruments should be recorded as liabilities or as equity, is re-assessed at the end of each reporting period. We do not use derivative instruments to hedge exposures to cash flow, market, or foreign currency risks. 



Effect of Recently Issued Accounting Pronouncements

 

See Note 2 of the Consolidated Financial Statements in Item 8 for a full description of recent accounting pronouncements, including the expected dates of adoption and estimated effects on results of operations and financial condition.

---

 

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK



Not applicable.

 

---

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA



The report of the independent registered public accounting firm and financial statements are included in Item 15 of this Annual Report on Form 10-K.

---

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

ITEM 9A. CONTROLS AND PROCEDURES

 

(a) Evaluation of Disclosure Controls and Procedures 

 

Our management, with the participation of the principal executive and principal financial officers, have evaluated the effectiveness of our disclosure controls and procedures, as defined in Rules 13a – 15(e) and 15d – 15(e) under the Securities Exchange Act of 1934, as amended, or Exchange Act, as of the end of the period covered by this Annual Report.  Our disclosure controls and procedures are designed to provide reasonable, not absolute, assurance that the objectives of our disclosure control system are met. Because of inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues, if any, within a company have been detected. Based on our evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of the period covered by this Report, our disclosure controls and procedures were effective.

 

(b) Management’s Annual Report on Internal Control Over Financial Reporting

 

Overview

 

Internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) refers to the process designed by, or under the supervision of, our principal executive officer and principal financial officer, and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America Management is responsible for establishing and maintaining adequate internal control over financial reporting for eMagin.

 

Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting also can be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, this risk.

 

Management has used the framework set forth in the report entitled “Internal Control -- Integrated Framework (2013)” published by the Committee of Sponsoring Organizations of the Treadway Commission to evaluate the effectiveness of our internal control over financial reporting. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.

 

Management’s Assessment

 

As of December 31, 2020, our management has assessed the effectiveness of our internal control over financial reporting and has determined that our internal control over financial reporting was effective.



(c) Changes in Internal Control over Financial Reporting

 

During the quarter ended December 31, 2020, there were no changes in our internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting, as communicated to the Audit Committee. Despite the impact of the COVID-19 pandemic, due to the Company’s classification as an essential business, our finance and administrative workforce worked onsite during the quarter ended December 31, 2020. We are continually monitoring and assessing the COVID-19 pandemic on our internal controls to minimize the impact on their design and operating effectiveness. 

---

 

ITEM 9B. OTHER INFORMATION



None.

---

 



PART III

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

The information required by this Item will be incorporated herein by reference from the sections captioned "Election of Directors", "Executive Officers" and "Section 16(a) Beneficial Ownership Reporting Compliance" in our proxy statement to be issued in connection with the Annual General Meeting of Shareholders to be held on June 25, 2021, which will be filed with the SEC within 120 days after the end of our fiscal year ended December 31, 2020 (the " 2021 Proxy Statement").

 

ITEM 11. EXECUTIVE COMPENSATION

 

The information required by this Item will be incorporated herein by reference from the sections captioned "Compensation of Directors", "Elements of Executive Compensation", "Summary Compensation Table", and "Outstanding Equity Awards Table" in the 2021 Proxy Statement.



ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS



The information required by this Item will be incorporated herein by reference in the 2021 Proxy Statement.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

The information required by this Item will be incorporated herein by reference from the sections captioned "Transaction with Related Persons" in the 2021 Proxy Statement.



ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES



The information required by this Item will be incorporated herein by reference from the section captioned "Audit Fees" in the 2021 Proxy Statement.

---

 

PART IV

 

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

 

(a) Financial Statements and Schedules

 

1. Financial Statements

 

The following consolidated financial statements are filed as part of this report under Item 8 of Part II “Financial Statements and Supplementary Data:

 

F-3    Consolidated Balance Sheets at December 31, 2020 and 2019.

F-4    Consolidated Statements of Operations for the Years Ended December 31, 2020 and 2019.

F-5    Consolidated Statements of Changes in Shareholders’ Equity for the Years Ended December 31, 2020 and 2019.

F-6    Consolidated Statements of Cash Flows for the Years Ended December 31, 2020 and 2019.

F-7    Notes to the Consolidated Financial Statements.



2. Financial Statement Schedules

 

Financial statement schedules not included herein have been omitted because they are either not required, not applicable, or the information is otherwise included herein.

 

3. Exhibits

 

The following exhibits are filed or incorporated by reference as part of this Annual Report on Form 10-K.





---

 







---

 



---

 

SIGNATURES

 

In accordance with Section 13 or 15(d) of the Exchange Act, the registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on this 18th day of March 2021.

 



In accordance with the Exchange Act, this report has been signed below by the following persons on March 18, 2021, on behalf of the registrant and in the capacities Indicated.