UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

(Mark One)

 

☒ QUARTERLY REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended: June 30, 2018

 

OR

 

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from ______________ to ______________

 

Commission File Number 001-38213

 

ARCIMOTO, INC.

(Exact name of registrant as specified in its charter)

 

Oregon		26-1449404
(State or other jurisdiction of incorporation or organization)		(IRS Employer Identification No.)

 

2034 West 2^nd Avenue, Eugene, OR 97402

(Address of principal executive offices and zip code)

 

(541) 683-6293

(Registrant’s telephone number, including area code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to filed such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or such shorter period that the registrant was required to submit and post such files). Yes ☒ No ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act:

 

Large accelerated filer ☐	Accelerated filer   ☐
Non-accelerated filer ☐ (Do not check if smaller reporting company)	Smaller reporting company   ☒
	Emerging growth company ☒

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes ☐ No ☒

 

As of August 9, 2018, there were approximately 15,993,854 shares of the registrant’s common stock issued and outstanding.

 

 

 

Arcimoto, Inc.

FORM 10-Q

For the Quarterly Period Ended June 30, 2018

 

TABLE OF CONTENTS

 

		Page
PART I.	FINANCIAL INFORMATION
Item 1.	Financial Statements (Unaudited)	1
	Condensed Balance Sheets as of June 30, 2018 and December 31, 2017	1
	Condensed Statements of Operations for the three and six months ended June 30, 2018 and 2017	2
	Condensed Statements of Cash Flows for the six months ended June 30, 2018 and 2017	3
	Condensed Notes to Financial Statements	4
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	13
Item 3.	Quantitative and Qualitative Disclosures about Market Risk	17
Item 4.	Controls and Procedures	17
PART II.	OTHER INFORMATION
Item 1.	Legal Proceedings	18
Item 1A.	Risk Factors	18
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	18
Item 3.	Defaults Upon Senior Securities	18
Item 4.	Mine Safety Disclosures	18
Item 5.	Other Information	18
Item 6.	Exhibits	19
	SIGNATURES	20

 

 

PART I - FINANCIAL INFORMATION

 

Item 1. Financial Statements (Unaudited).

 

ARCIMOTO, INC.

CONDENSED BALANCE SHEETS

(Unaudited)

 

		June 30, 2018				December 31, 2017
ASSETS
Current assets:
Cash and cash equivalents		$	2,136,934			$	7,824,109
Certificates of deposit			5,247,523				6,246,850
Accounts receivable			341				500
Inventory			1,290,548				194,525
Other current assets			1,034,668				401,160
Total current assets			9,710,014				14,667,144
Property and equipment, net			4,555,628				2,434,026
Other long-term assets			38,844				-
Total assets		$	14,304,486			$	17,101,170
LIABILITIES AND STOCKHOLDERS’ EQUITY
Liabilities:
Current liabilities:
Accounts payable		$	29,764			$	663,773
Accrued liabilities			470,949				255,758
Customer deposits			370,824				399,967
Current portion of capital lease obligations			297,315				-
Total current liabilities			1,168,852				1,319,498
Capital lease obligations, net of current portion			1,376,478				-
Total liabilities			2,545,330				1,319,498
Commitments and contingencies (Note 9)
Stockholders’ equity:
Series A-1 preferred stock, no par value, 1,500,000 authorized, none issued and outstanding as of June 30, 2018 and December 31, 2017, respectively.			-				-
Common stock, no par value, 20,000,000 authorized, 15,919,215 and 15,872,001 issued and outstanding as of June 30, 2018 and December 31, 2017, respectively.			27,264,248				27,177,790
Additional paid-in capital			627,537				519,340
Accumulated deficit			(16,132,629	)			(11,915,458	)
Total stockholders’ equity			11,759,156				15,781,672
Total liabilities and stockholders’ equity		$	14,304,486			$	17,101,170

 

See accompanying notes to financial statements.

 

 

ARCIMOTO, INC.

CONDENSED STATEMENTS OF OPERATIONS

(Unaudited)

 

		Three Months Ended June 30								Six Months Ended June 30
		2018				2017				2018				2017
Revenue
Grant revenue		$	-			$	-			$	-			$	40,580
Product sales – related party			282				-				907				-
Product sales			85,050				-				85,082				-
Total revenues			85,332				-				85,989				40,580
Cost of goods sold			95,815				-				95,814				-
Gross profit (loss)			(10,483	)			-				(9,825	)			40,580
Operating expenses
Research and development			363,652				263,797				1,411,452				531,902
Sales and marketing			418,162				150,358				773,677				235,352
General and administrative			1,400,018				160,158				2,042,166				347,119
Total operating expenses			2,181,832				574,313				4,227,295				1,114,373
Loss from operations			(2,192,315	)			(574,313	)			(4,237,120	)			(1,073,793	)
Other income and expense
Interest expense			(16,921	)			(10,857	)			(20,522	)			(21,350	)
Other income, net			40,137				48				40,471				60
Net loss		$	(2,169,099	)		$	(585,122	)		$	(4,217,171	)		$	(1,095,083	)
Weighted-average common shares outstanding - basic and diluted			15,919,215				12,761,712				15,907,958				12,566,449
Net loss per common share - basic and diluted		$	(0.14	)		$	(0.05	)		$	(0.27	)		$	(0.09	)

 

See accompanying notes to financial statements.

 

 

ARCIMOTO, INC.

CONDENSED STATEMENTS OF CASH FLOWS

(Unaudited)

 

		Six Months Ended June 30,
		2018				2017
OPERATING ACTIVITIES
Net loss		$	(4,217,171	)		$	(1,095,083	)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation and amortization			160,255				1,337
Loss on disposal of property and equipment			24,438				-
Stock-based compensation			165,397				85,187
Changes in operating assets and liabilities:
Accounts receivable			159				(29,947	)
Inventory			(1,096,024	)			(96,836	)
Other current assets			(448,800	)			(12,234	)
Accounts payable			(663,696	)			19,940
Accrued liabilities			214,158				64,030
Customer deposits			(29,143	)			41,132
Net cash used in operating activities			(5,890,427	)			(1,022,474	)
INVESTING ACTIVITIES
Purchases of certificates of deposit			(5,250,000	)			-
Redemption of certificates of deposit			6,250,000				-
Other long-term assets			(38,844	)			-
Proceeds from sale of property and equipment			250				-
Purchases of property and equipment			(709,243	)			-
Net cash provided by investing activities			252,163				-
FINANCING ACTIVITIES
Proceeds from sale of stock			-				1,225,500
Proceeds from the exercise of stock options			29,259				-
Payment of offering costs			-				(8,552	)
Proceeds from convertible notes payable to related parties			-				100,000
Proceeds from convertible notes payable			-				100,000
Payment of capital lease obligations			(78,170	)			-
Repayment of notes payable			-				(51,207	)
Net cash provided by (used in) financing activities			(48,911	)			1,365,741
Net cash increase (decrease) for period			(5,687,175	)			343,267
Cash at beginning of period			7,824,109				414,405
Cash at end of period		$	2,136,934			$	757,672
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION:
Cash paid during the period for interest		$	16,921			$	6,476
Cash paid during the period for income taxes		$	150			$	150
SUPPLEMENTAL DISCLOSURE OF NON-CASH INVESTING AND FINANCING ACTIVITIES:
Portion of equipment acquired through capital leases		$	1,751,963			$	-
Equipment purchases in accounts payable		$	29,685			$	-

 

See accompanying notes to financial statements.

 

 

ARCIMOTO, INC.

CONDENSED NOTES TO FINANCIAL STATEMENTS

(Unaudited)

 

NOTE 1: NATURE OF OPERATIONS

 

Arcimoto, Inc. (the “Company”) was originally formed on November 21, 2007 as WTP Incorporated, an Oregon Corporation, and later changed its name to Arcimoto, Inc. The Company was founded in order to build products that catalyze the shift to a sustainable transportation system. The first step in this shift has been developing an affordable, daily utility, pure electric vehicle. Over the past ten years, the Company has developed a revolutionary new vehicle platform designed around the needs of everyday drivers. Its main product is the Fun Utility Vehicle® (“FUV”), the first real, affordable, and fossil-free alternative for the vast majority of daily trips. Compared to the average car, the FUV has dropped 3/4 of the weight and 2/3 of the footprint, in order to bring the joy of ultra-efficient, pure electric driving to the masses.

 

Risks and Uncertainties

 

The Company has commenced revenue-generating activities, having delivered two FUVs to customers in December 2017, one of which was to a related party, two in June 2018 and two in July 2018. The Company currently has limited production and distribution capabilities and is still in the process setting up facilities to manufacture vehicles on a larger scale. We also do not have a history of higher-scale production and may encounter delays, flaws, or inefficiencies in the manufacturing process, which may prevent or delay us from achieving higher-scale production within our anticipated timeline. We believe that small scale Retail Series production will commence by the end of 2018; however, delays in finalizing the FUV design, receiving machinery, availability of inventory, and machinery tooling customization could delay such estimates.

 

The Company has limited experience in developing, training and managing a sales force, and will incur substantial additional expenses marketing of its current and future products and services. Developing a full marketing and sales force is also time consuming and could delay launch of our future products and services. In addition, the Company will compete with companies that currently have extensive and well-funded marketing and sales operations. Our marketing and sales efforts may be unable to compete successfully against these companies.

 

Further, the Company’s business and operations are sensitive to general governmental policy, business and economic conditions in the U.S. and worldwide. A host of factors beyond the Company’s control could cause fluctuations in these conditions. Other developments, including but not limited to economic recessions, trends in vehicle manufacturing, consumer taste, availability of inventory, and changes in government policy related to cars and motorcycles, could have a material adverse effect on the Company’s financial condition and the results of its operations.

 

The Company’s industry is characterized by rapid changes in technology and customer demands. As a result, the Company’s products and services may quickly become obsolete and unmarketable. The Company’s future success will depend on its ability to adapt to technological advances, anticipate customer demands, develop new products and services and enhance our current products and services on a timely and cost-effective basis. Further, the Company’s products and services must remain competitive with those of other companies with substantially greater resources. The Company may experience technical or other difficulties that could delay or prevent the development, introduction or marketing of new products and services or enhanced versions of existing products and services. Also, the Company may not be able to adapt new or enhanced products and services to emerging industry standards, and the Company’s new products and services may not be favorably received. In addition, we may not have the capital resources to further the development of existing and/or new products.

 

NOTE 2: GOING CONCERN

 

The accompanying financial statements have been prepared on a basis that the Company is a going concern, which contemplates the realization of assets and satisfaction of liabilities in the normal course of business. The Company has experienced recurring operating losses and negative operating cash flows since inception.

 

 

The Company generated revenues from product sales for the first time in November 2017, and has had limited sales in 2018. The Company has not achieved positive earnings and operating cash flows to enable the Company to finance its operations internally. Funding for the business to date has come primarily through the issuance of equity securities. We may require additional funding in the future to continue to operate in the normal course of business. Accordingly, there is substantial doubt about the Company’s ability to continue as a going concern.

 

Although the Company’s objective is to increase its revenues from the sales of its products within the next few years sufficient to generate positive operating and cash flow levels, there can be no assurance that the Company will be successful in this regard. The Company may also need to raise additional capital in order to fund its operations, which it intends to obtain through debt and/or equity offerings. Funds on hand and any follow-on capital, if needed, will be used to invest in our business to expand sales and marketing efforts, enhance our current product by continuing research and development to bring the FUV to retail production, continue to build out and optimize our production facility, and fund operations until positive cash flow is achieved. The need for additional capital may be adversely impacted by uncertain market conditions or approval by regulatory bodies.

 

NOTE 3: SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

Unaudited Interim Financial Information

 

The accompanying unaudited financial statements have been prepared by the Company in accordance with accounting principles generally accepted in the United States of America (“GAAP”) for interim financial information, and pursuant to the instructions to Form 10-Q promulgated by the United States Securities and Exchange Commission (the “SEC”). Accordingly, they do not include all information and disclosures required by GAAP for complete financial statement presentation. In the opinion of management, the accompanying condensed financial statements contain all adjustments (consisting of only normal recurring adjustments) necessary to present fairly the Company’s financial position as of June 30, 2018, and the results of its operations and its cash flows for the three and six months ended June 30, 2018 and 2017. Results for the three and six months ended June 30, 2018 are not necessarily indicative of the results to be expected for the year ending December 31, 2018. The information included in this Quarterly Report on Form 10-Q should be read in conjunction with the audited financial statements and notes thereto for the year ended December 31, 2017 included in the Company’s Annual Report on Form 10-K filed with the SEC on March 30, 2018.

 

Basis of Presentation

 

The accounting and reporting policies of the Company conform with GAAP.

 

Use of Estimates

 

The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

 

Fair Value Measurements

 

The Company’s financial instruments consist primarily of cash, certificates of deposits, and capital lease obligations. The carrying amounts of such financial instruments approximate their respective estimated fair value due to the short-term maturities and approximate market interest rates of these instruments. The estimated fair value is not necessarily indicative of the amounts the Company would realize in a current market exchange or from future earnings or cash flows. The Company adopted Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 820-10, Fair Value Measurements and Disclosures, which defines fair value, establishes a framework for measuring fair value, and expands disclosures about fair value measurements. The standard provides a consistent definition of fair value which focuses on an exit price that would be received upon sale of an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.

 

 

The standard also prioritizes, within the measurement of fair value, the use of market-based information over entity specific information and establishes a three-level hierarchy for fair value measurements based on the nature of inputs used in the valuation of an asset or liability as of the measurement date.

 

The three-level hierarchy for fair value measurements is defined as follows:

 

●

Level 1 – inputs to the valuation methodology are quoted prices (unadjusted) for identical assets or liabilities in active markets;

 

●

Level 2 – inputs to the valuation methodology include quoted prices for similar assets and liabilities in active markets, and inputs that are observable for the asset or liability other than quoted prices, either directly or indirectly, including inputs in markets that are not considered to be active; and

 

●

Level 3 – inputs to the valuation methodology are unobservable and significant to the fair value measurement.

 

Categorization within the valuation hierarchy is based upon the lowest level of input that is significant to the fair value measurement. The carrying amounts reported in the accompanying financial statements for current assets and current liabilities approximate the fair value because of the immediate or short-term maturities of the financial instruments. As of June 30, 2018 and December 31, 2017, the Company did not have any level 2 or level 3 instruments.

 

Cash and Cash Equivalents

 

The Company considers deposits that can be redeemed on demand and investments that have original maturities of less than three months, when purchased, to be cash equivalents. As of June 30, 2018 and December 31, 2017, the Company held its balance of cash and cash equivalents in two financial institutions, which, at times, exceed the federally insured limits.

 

Certificates of Deposit

 

The Company uses certificates of deposit for short-term investments. No more than $250,000 is invested in any single certificate of deposit so that all balances are covered by federally insured limits. As of June 30, 2018 and December 31, 2017, approximately $5,248,000 and $6,247,000, respectively, of the Company’s certificates of deposit had original maturities greater than three months and therefore were not included in cash and cash equivalents.

 

Inventory

 

Inventory is stated at the lower of cost (using the first-in, first-out method “FIFO”) or market. Inventories consist of purchased electric motors, electrical storage and transmission equipment, and component parts. Inventories consist almost entirely of raw materials and component parts as of June 30, 2018 and December 31, 2017. Work-in-progress as of June 30, 2018 was approximately $215,000, with no significant amounts as of December 31, 2017. There were no finished goods at either period end.

 

Property and Equipment

 

Property and equipment are recorded at cost, less accumulated depreciation. Expenditures for major additions and improvements are capitalized and minor replacements, maintenance, and repairs are charged to expense as incurred. When property and equipment are retired or otherwise disposed of, the cost and accumulated depreciation are removed from the accounts and any resulting gain or loss is included in the results of operations for the respective period. Depreciation is provided over the estimated useful lives of the related assets using the straight-line method for financial statement purposes.

 

The estimated useful lives for significant property and equipment categories are as follows:

 

Computer Equipment and Software		1 – 3 years
Furniture and Fixtures		2 – 7 years
Machinery and Equipment		5 – 10 years
Leasehold Improvements		Shorter of useful or lease life

 

 

Customer Deposits

 

Customer deposits are generally held in a separate deposit account. Revenue is not recognized on customer deposits until the vehicle is shipped to the customer.

 

Revenue Recognition

 

The Company recognizes revenue when the earnings process is complete. This generally occurs when products are shipped to the customer in accordance with the sales agreement or purchase order, which is when control of the vehicle passes to the customer. The Company’s shipping terms are generally F.O.B. shipping point, where title is transferred and revenue is recognized when the products are shipped to customers. The Company determined that the adoption of Accounting Standards Update No. 2014-09 (ASU 2014-09), Revenue from Contracts with Customers (“ASC 606”) had no material impact to the Company’s financial statements.

 

Stock-Based Compensation

 

The Company accounts for stock-based compensation in accordance with FASB ASC 718, Compensation - Stock Compensation. Under the fair value recognition provisions of FASB ASC 718, stock-based compensation cost is measured at the grant date based on the fair value of the award and is recognized as expense ratably over the requisite service period, which is generally the option or warrant vesting period. The Company uses the Black-Scholes option pricing model to determine the fair value of stock options and common stock warrants.

 

The Company measures compensation expense for its non-employee stock-based compensation under FASB ASC 505-50, Equity-Based Payments to Non-Employees. The fair value of the award issued or committed to be issued is used to measure the transaction, as this is more reliable than the fair value of the services received. The fair value is measured at the value of the Company’s common stock and/or the calculated value based on the inputs to the Black-Scholes model on the date that the commitment for performance by the counterparty has been reached or the counterparty’s performance is complete. The fair value of the equity award is charged directly to stock-based compensation expense and credited to additional paid-in capital.

 

Research and Development

 

Expenses relating to research and development are expensed as incurred. Vehicle and battery research and development expenses consisted of approximately $364,000 and $1,411,000, for the three and six month periods ended June 30, 2018, respectively, and $264,000 and $532,000, for the three and six month periods ended June 30, 2017, respectively.

 

Net Earnings or Loss per Share

 

The Company’s computation of earnings (loss) per share (“EPS”) includes basic and diluted EPS. Basic EPS is measured as the income (loss) available to common shareholders divided by the weighted average number of common shares outstanding for the period. Diluted EPS is similar to basic EPS but presents the dilutive effect on a per share basis of potential common shares (e.g., common stock warrants and common stock options) as if they had been converted at the beginning of the periods presented, or issuance date, if later. Potential common shares that have an anti-dilutive effect (i.e., those that increase income per share or decrease loss per share) are excluded from the calculation of diluted EPS.

 

Loss per common share is computed by dividing net loss by the weighted average number of shares of common stock outstanding during the respective periods. Basic and diluted loss per common share is the same for all periods presented because all common stock warrants and common stock options outstanding were anti-dilutive.

 

 

At June 30, 2018 and 2017, the Company excluded the outstanding securities summarized below, which entitled the holders thereof to ultimately acquire shares of common stock, from its calculation of earnings per share, as their effect would have been anti-dilutive.

 

		June 30, 2018				June 30, 2017
Warrants to purchase common stock			958,004				988,004
Stock options to purchase common stock			940,000				742,700
Underwriters warrants			122,238				-
Warrants issued to vendors outside of employee plans			47,000				-
Total			2,067,242				1,730,704

 

Recent Accounting Pronouncements

 

In February 2016, the FASB issued Accounting Standards Update (“ASU”) No. 2016-02, “Leases (Topic 842)”, which significantly changes the accounting for operating leases by lessees. The accounting applied by lessors is largely unchanged from that applied under previous guidance. The new guidance requires lessees to recognize lease assets and lease liabilities in the balance sheet, initially measured at the present value of the lease payments, for leases which were classified as operating leases under previous guidance. Lease cost included in the statement of income will be calculated so that the cost of the lease is allocated over the lease term, generally on a straight-line basis. Lessees may make an accounting policy election to exclude leases with a term of 12 months or less from the requirement to record related assets and liabilities. The new standard is effective for public companies for fiscal years beginning after December 15, 2018. The Company plans to adopt the new standard effective for periods after December 31, 2018. The Company does not expect the adoption of this standard to have a material impact on its results of operations or cash flows; however, the Company has not determined the impact the adoption of this new standard will have on its financial position.

 

Management does not believe that any other recently issued, but not yet effective, authoritative guidance, if currently adopted, would have a material impact on the Company’s financial statement presentation or disclosures.

 

Concentrations

 

During the six months ended June 30, 2018, the Company purchased certain products from one vendor, which accounted for approximately 11% of total purchases. Management believes the loss of this vendor could have an adverse impact on the Company’s operations.

 

NOTE 4: PROPERTY AND EQUIPMENT

 

As of June 30, 2018 and December 31, 2017, our property and equipment consisted of the following:

 

		June 30, 2018				December 31, 2017
Computer equipment and software		$	42,361			$	60,696
Furniture and fixtures			46,839				50,996
Machinery and equipment			2,253,795				1,658,976
Leasehold improvements			332,146				297,025
Machinery and equipment in process			2,061,938				462,531
			4,737,079				2,530,224
Less: accumulated depreciation			(181,451	)			(96,198	)
Total		$	4,555,628			$	2,434,026

 

Machinery and equipment in process is comprised primarily of tooling and equipment related to the manufacturing of our vehicles. The total purchase commitments for machinery and equipment in process as of June 30, 2018 and December 31, 2017, is approximately $2,389,000 and $574,000, respectively, which include the amounts recorded above and remaining commitments of approximately $327,000 and $111,000, respectively. Completed assets are transferred to their respective asset class and depreciation begins when the asset is ready for its intended use.

 

 

Depreciation expense was approximately $87,000 and $160,000 during the three and six months ended June 30, 2018, respectively, and was approximately $1,000 and $1,000 during the three and six months ended June 30, 2017, respectively.

 

NOTE 5: CAPITAL LEASE OBLIGATIONS

 

The Company has financed a total of approximately $1,752,000 of its capital equipment purchases with monthly payments ranging from $437 to $8,582, repayment terms ranging from 48 to 60 months, and effective interest rates ranging from 4.52% to 9.86%. These lease obligations mature ranging from December 2021 through June 2023 and are secured by approximately $2,143,000 in underlying assets which have $11,397 in accumulated depreciation as of June 30, 2018. The balance of its capital lease obligations was approximately $1,674,000 and $0 as of June 30, 2018 and December 31, 2017, respectively.

 

NOTE 6: STOCKHOLDERS’ EQUITY

 

Preferred Stock

 

The Company is authorized to issue 5,000,000 shares of preferred stock, no par value, of which 1,500,000 shares were designated as Series A-1 Preferred Stock. As of June 30, 2018 and December 31, 2017, there were no shares of Series A-1 Preferred Stock issued and outstanding.

 

The Series A-1 Preferred Stock is convertible at any time after issuance at the option of the holder into shares of common stock at the original issue price of the Series A-1 Preferred Stock. The Series A-1 Preferred Stock is also subject to mandatory conversion provisions in certain circumstances and is not redeemable. To prevent dilution, the conversion price of the Series A-1 Preferred Stock is to be adjusted for any issuance of securities, excluding exempt securities, which change the number of shares of common stock outstanding. The Series A-1 Preferred Stockholders are entitled to equal voting rights to common stockholders on an as-converted basis and receive preference to the common stockholders upon liquidation.

 

Common Stock

 

The Company is authorized to issue 20,000,000 shares of common stock, no par value.

 

The Company has reserved a total of 2,955,800 shares of its common stock pursuant to the equity incentive plans (see Note 7). The Company has 1,898,004 and 1,957,204 stock options and warrants outstanding under these plans as of June 30, 2018 and December 31, 2017, respectively.

 

During the six month period ended June 30, 2018, the Company issued 20,000 restricted common shares with a fair value of $57,200 based on the closing price of the Company’s stock on the date of grant. This fair value was expensed upon issuance for services rendered. Issuances for the exercise of warrants and options are disclosed in Note 7.

 

NOTE 7: STOCK-BASED PAYMENTS

 

The Company grants stock options and warrants pursuant to the 2018 Omnibus Stock Incentive Plan (“2018 Plan”), Amended and Restated 2015 Stock Incentive Plan (“2015 Plan”) and the Second Amended and Restated 2012 Employee Stock Benefit Plan (“2012 Plan”).

 

 

Stock-based compensation, including stock-options, warrants and stock issued for compensation is included in the statement of operations as follows:

 

		Three months ended June 30,								Six months ended June 30,
		2018				2017				2018				2017
Research and development		$	25,996			$	-			$	57,011			$	-
Sales and marketing			7,522				-				72,373				-
General and administrative			18,283				42,907				36,013				85,187
Total		$	51,801			$	42,907			$	165,397			$	85,187

 

2018 Omnibus Stock Incentive Plan

 

The 2018 Omnibus Stock Incentive Plan (the “2018 Plan”) was approved by the Board of Directors and then the Company’s shareholders at the Company’s 2018 annual meeting of shareholders held on June 9, 2018. The 2018 Plan provides the Company the ability to grant to employees, directors, consultants or advisors shares of common stock of the Company through the grant of equity awards, including, but not limited to, options that are incentive stock options or NQSOs and restricted stock, provided that only employees are entitled to receive incentive stock options in accordance with IRS guidelines. The Company reserved 1,000,000 shares of common stock under the 2018 Plan. Awards that are forfeited generally become available for grant under the 2018 Plan. As of June 30, 2018, no grants have been made under the 2018 Plan.

 

2015 Stock Incentive Plan

 

The 2015 Stock Incentive Plan (the “2015 Plan”) provides the Company the ability to grant to employees, directors, consultants or advisors shares of common stock of the Company through the grant of options that are incentive stock options or NQSOs and/or the grant of restricted stock, provided that only employees are entitled to receive incentive stock options in accordance with IRS guidelines. The Company reserved 1,000,000 shares of common stock for delivery under the 2015 Plan. Awards that are forfeited generally become available for grant under the 2015 Plan.

 

There were no grants made under the 2015 Plan during the six months ended June 30, 2018. See below for the range of variables used in assessing the fair value at the grant date for the options issued during the six months ended June 30, 2017:

 

		June 30, 2017
Annual dividend yield			-
Expected life (years)			6.0-10.0
Risk-free interest rate			2.14-2.46	%
Expected volatility			21.3	%

 

Employee stock-based compensation expense included in operating expenses for the six months ended June 30, 2018 and 2017 was $101,230 and $58,192, respectively.

 

For the NQSOs issued for the six months ended June 30, 2017, vesting was completed on the date of issue. The fair value of these non-employee awards was $22,445 for the six months ended June 30, 2017.

 

Total compensation cost related to non-vested awards not yet recognized as of June 30, 2018 was $304,755 and will be recognized on a straight-line basis through the end of the vesting periods or December 31, 2020. The amount of future stock option compensation expense could be affected by any future option grants or by any forfeitures.

 

On January 31, 2018, 14,200 employee options were exercised at a price per share of $2.0605 for total proceeds to the Company of $29,259.

 

 

As of June 30, 2018, 45,800 options are still issuable under the 2015 Plan.

 

2012 Employee Stock Benefit Plan

 

The 2012 Employee Stock Benefit Plan (the “2012 Plan”) provides the Company the ability to grant to directors, employees, consultants, advisors or independent contractors shares of common stock of the Company through the grant of warrants and/or the grant of common stock. The Company reserved 1,000,000 shares of common stock for delivery under the 2012 Plan. Warrants issued and outstanding under the 2012 Plan as of June 30, 2018 and 2017 were 958,004 and 988,004, respectively. Warrants expire 10 to 15 years from the grant date and were vested when issued.

 

On January 29, 2018, 15,000 employee warrants with an exercise price of $0.50 per share were exercised in a cashless transaction at a market price of $3.77756 per share, which was based on the average of the Company’s daily closing prices from January 19-25, 2018, amounting to 13,014 shares.

 

As of June 30, 2018, 11,996 warrants are still issuable under the 2012 Plan.

 

The Company recorded $6,966 in stock compensation expense on warrants that vested during the six months ended June 30, 2018 issued outside the 2012 Plan in the prior year.

 

NOTE 8: CUSTOMER DEPOSITS

 

The Company has received customer deposits ranging from $100 to $10,100 per vehicle for Retail Series production vehicles and $42,000 per vehicle for Signature Series vehicles for purposes of securing a vehicle production slot. As of June 30, 2018 and December 31, 2017, the Company’s balance of deposits received was approximately $371,000 and $400,000, respectively. As of June 30, 2018 and December 31, 2017, $286,824 and $231,967, respectively, of these deposits were refundable upon demand. Deposits are included in current liabilities in the accompanying balance sheets. When a customer’s order is ready to enter the production process, the customer is notified that if they would like to proceed with the purchase of a vehicle, their deposit will no longer be refundable and any additional deposit required must be paid prior to the start of the manufacturing process.  Customer deposits from related parties total $1,700 as of June 30, 2018 and December 31, 2017.

 

NOTE 9: COMMITMENTS AND CONTINGENCIES

 

On June 7, 2018, the Company entered into a lease for an approximately 5,291 square foot commercial industrial office space in Eugene, Oregon. The month-to-month lease began on June 11, 2018, and can be terminated with sixty days notice. Rent is $4,500 per month. The space is being used for research, development, manufacturing, service and office.

 

An additional security deposit of $38,844 was paid during the six months ended June 30, 2018 for our primary facility in Eugene, Oregon, due to certain conditions related to access of capital lease equipment.

 

Litigation

 

On March 11, 2018, the Company was served with a lawsuit entitled John R Switzer vs W.R. Hambrecht & Co. LLC et al., Case Number: CGC-18-564904, filed in San Francisco County Superior Court in the State of California.  In this action, the Company has been named as a defendant along with five individuals who were directors and/or executive officers at the time of the completion of the Company’s Regulation A offering on September 21, 2017. The action is styled as a putative class action, alleged on behalf of all those who purchased the Company’s common stock in its Regulation A offering. The plaintiff has alleged violations of Section 12(a)(2) and Section 15 of the Securities Act of 1933, as amended, and is seeking damages in an unspecified amount to be proven at trial. In addition, on March 28, 2018, the Company was served with another lawsuit entitled Jay Mendelson v. Arcimoto, Inc. et al., Case Number CGC-18-565324, filed in San Francisco County Superior Court in the State of California. In that action, which is styled as a putative class action, the Company has also been named as a defendant along with the same individuals who were directors and/or executive officers at the time of the completion of our Regulation A offering on September 21, 2017.  The allegations and claims made in the Mendelson action are substantially similar to those of the Switzer action and the plaintiff also is seeking damages in an unspecified amount to be proven at trial. The two actions were consolidated into a single lawsuit on May 28, 2018. The Company believes that the consolidated lawsuit is without merit and intends to vigorously defend itself against these claims in court. On July 30, 2018, counsel for the Company filed a Demurrer to the consolidated complaint, seeking its dismissal.

 

NOTE 10: SUBSEQUENT EVENTS

 

In July 2018, 45,000 employee warrants under the 2012 Plan with an exercise price of $0.50 per share were exercised in cashless transactions based on the quoted market closing price of the Company’s common stock for the preceding five days prior to exercise, resulting in 39,639 shares being issued.

 

In August 2018, the Company issued 35,000 restricted common shares with a fair value of $138,250 based on the closing price of the Company’s stock on the date of grant. This fair value was expensed upon issuance for services rendered.

 

 

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

 

This Quarterly Report on Form 10-Q contains “forward-looking statements.” Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based, in part, on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and are likely to, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors discussed from time to time in this report and in other documents which we file with the SEC. In addition, such statements could be affected by risks and uncertainties related to:

 

	●	overall strength and stability of general economic conditions and of the automotive industry more specifically, both in the United States and globally;
	●	our ability to effectively execute our business plan and growth strategy;
	●	unforeseen or recurring operational problems at our facility, or a catastrophic loss of our manufacturing facility;
	●	our dependence on our suppliers;
	●	the volatility of our stock price;
	●	changes in consumer demand for, and acceptance of, our products;
	●	changes in the competitive environment, including adoption of technologies and products that compete with our products;
	●	our ability to generate consistent revenues;
	●	our ability to design, produce and market our vehicles;
	●	our reliance on key personnel;
	●	changes in the price of oil and electricity;
	●	changes in laws or regulations governing our business and operations;
	●	our ability to maintain adequate liquidity and financing sources and an appropriate level of debt, if any, on terms favorable to our company;
	●	the number of reservations and cancellations for our vehicles and our ability to deliver on those reservations;
	●	our ability to maintain quality control over our vehicles and avoid material vehicle recalls;
	●	our ability to manage the distribution channels for our products, including our ability to successfully implement our direct to consumer distribution strategy and any additional distribution strategies we may deem appropriate;
	●	our ability to obtain and protect our existing intellectual property protections including patents;
	●	changes in accounting principles, or their application or interpretation, and our ability to make estimates and the assumptions underlying the estimates, which could have an effect on earnings;
	●	interest rates and the credit markets;
	●	our ability to maintain our NASDAQ Capital Market listing; and
	●	costs and risks associated with litigation; and
	●	other risks described from time to time in periodic and current reports that we file with the SEC.

 

The foregoing list does not contain all of the risks and uncertainties. Any forward-looking statements speak only as of the date on which they are made, and except as may be required under applicable securities laws; we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the filing date of this report.

 

 

Item 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations.  

 

The following discussion and analysis of our financial condition and results of operations for the three and six months ended June 30, 2018 should be read together with our unaudited condensed financial statements and related notes included elsewhere in this report and in conjunction with the audited financial statements and notes thereto for the year ended December 31, 2017 included in the Company’s Annual Report on Form 10-K filed with the SEC on March 30, 2018. The following discussion contains “forward-looking statements” that reflect our future plans, estimates, beliefs and expected performance. Our actual results may differ materially from those currently anticipated and expressed in such forward-looking statements as a result of a number of factors. We caution that assumptions, expectations, projections, intentions or beliefs about future events may, and often do, vary from actual results and the differences can be material. Please see “Cautionary Note Regarding Forward-Looking Statements.”

 

Overview

 

We design, develop, manufacture, and sell ultra-efficient fully electric vehicles. We achieved limited production and delivered our first Signature Series vehicles at the end of 2017, with the remainder of the Signature Series vehicle limited production and delivery completed in the third quarter of 2018. We anticipate that Beta development and design lock will be completed and Pilot and Retail Series production will follow by the end of 2018.

 

Management Opportunities, Challenges and Risks

 

Demand, Production and Capital

 

Demand for the Retail Series Arcimoto FUV continued to increase throughout 2018. As of June 30, 2018, we had 2,800 FUV pre-orders with small refundable deposits, representing an increase of 1,277, or approximately 84%, from the 1,523 pre-orders as of June 30, 2017. As of August 6, 2018, we had 2,907 pre-orders.

 

Although we initially contemplated producing approximately 2,000 vehicles in the eighteen months following the closing of our Regulation A offering, management decided to slow the rollout of FUVs post-offering by reducing the total number of vehicles that we anticipate producing in 2018. Our decision was based, in part, on the following factors that became apparent to us in the fourth quarter of 2017:

 

1.

The substantial public support we received in our Regulation A offering in September and October 2017 allowed us to begin significant portions of the Phase 2 production preparations which we originally contemplated would not commence until twelve months after the closing of our Regulation A offering. The Phase 2 manufacturing process requires additional up-front time to build out the manufacturing facility and redesign the FUV’s upper frame for robotic mass production. Because we anticipate profitability will only be achieved with the margins and volumes possible utilizing the Phase 2 automated manufacturing processes, limiting the number of vehicles built prior to these Phase 2 processes coming online, keeps us true to our commitment to capital efficiency.

 

2.

We experienced a delay in receiving key, single-source component parts from our suppliers of motors, motor controllers, and batteries that were expected in the fourth quarter 2017. Some of these materials were not received until the end of first quarter 2018. These supplier delays have continued throughout 2018.

 

3.

The manufacture of the first two Signature Series vehicles took longer than anticipated, due primarily to the fitting of body panel parts. We are currently using the knowledge we glean from the initial manufacturing processes used in the production of our first Signature Series vehicles to optimize and finalize the design and manufacturing processes for the Beta and Pilot Series FUVs. As a venture that embraces continuous improvement, we strive to improve our designs and manufacturing processes.

 

We anticipate that achieving full Phase 2 Retail Series production will involve many moving parts including, but not limited to, the scale production supply chain, vehicle design finalization, and key component robotic manufacture. We believe that the adjustments we have made to our plan to scale production more closely aligns each of these objectives and will enhance our chances to achieve profitability sooner than if we had stayed with the sequencing we originally contemplated.

 

 

Trends in Cash Flow, Capital Expenditures and Operating Expenses

 

We anticipate initiating Retail Series production by year end 2018. Given this plan, our capital expenditure needs include capital costs for the tooling, production equipment and construction of the FUV Arcimoto production line.

 

Operating expenses grew by approximately 279% for the six months ended June 30, 2018, as compared to the six months ended June 30, 2017. This increase was driven by the beginning of the transformation of Arcimoto from a research and development (“R&D”) operation into a manufacturing company. The number of employees increased by approximately 209%, from 22 as of June 30, 2017 to 68 employees as of June 30, 2018. In December 2017, we moved into a new 30,000 square foot facility from our previous 5,000 square foot facility. In June 2018, we added 5,291 square feet of R&D, manufacturing, service and office space and, as a result, incurred cost associated with equipping the employees, implementing systems, and running the larger facilities. R&D costs increased during the six months ended June 30, 2018 as we redesigned the FUV for automated production processes, and sales and marketing costs increased due to investor relations expenses associated with being a publicly traded company. General and administrative cost continues to increase as we build out manufacturing, service and regulatory processes and operate as a public company.

 

New Accounting Pronouncements

 

See Note 3 “Summary of Significant Accounting Policies” to our Financial Statements included under Part I, Item 1 of this Quarterly Report on Form 10-Q which includes a discussion of recent accounting pronouncements that may impact us.

 

Disclosure About Off-Balance Sheet Arrangements

 

None.

 

Critical Accounting Policies and Estimates

 

Our financial statements are prepared in accordance with GAAP. The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, costs and expenses and related disclosures. We base our estimates on historical experience, as appropriate, and on various other assumptions that we believe are reasonable under the circumstances. Changes in the accounting estimates are reasonably likely to occur from period to period. Accordingly, actual results could differ significantly from the estimates made by our management. We evaluate our estimates and assumptions on an ongoing basis. To the extent that there are material differences between these estimates and actual results, our future financial statement presentation, financial condition, results of operations and cash flows will be affected.

 

For a description of our critical accounting policies and estimates, please refer to the “Summary of Significant Accounting Policies” in Note 3 to our Financial Statements under Part I, Item 1 of this Quarterly Report on Form 10-Q and the Company’s Annual Report on Form 10-K filed with the SEC on March 30, 2018.

 

Results of Operations

 

Three months ended June 30, 2018 versus three months ended June 30, 2017

 

Revenues

 

We had approximately $85,000 in revenue, comprising of $84,000 in revenue from the sales of our vehicles, and approximately $1,000 in revenue from merchandise, and outside metal fabrication during the quarterly period ended June 30, 2018. There was no such revenue for the quarterly period ended June 30, 2017.

 

Operating Expenses

 

Research and Development Expenses

 

Research and development (“R&D”) expenses consist primarily of personnel costs for our engineering and research teams and prototyping materials expense. R&D expenses for the three months ended June 30, 2018 and 2017 were approximately $364,000 and $264,000, respectively. The primary reason for the increase in R&D expenses of $100,000, or 38%, resulted from an increase in engineering salaries and benefits of approximately $153,000 and an increase in computer expense for new employees of $25,000, offset by a reduction in R&D materials expense of approximately $78,000.

 

 

Sales and Marketing Expenses

 

Sales and marketing (“S&M”) expenses for the three months ended June 30, 2018 and 2017 were approximately $418,000 and $150,000, respectively. The primary reasons for the increase in sales and marketing expenses during the three months ended June 30, 2018 of approximately $268,000 or 178%, as compared to the prior period was an $133,000 increase in public relations, marketing, and travel expenses associated with public company investor relations, a $110,000 increase in salary and benefits expenses, and a $23,000 increase in lobbying expenses.

 

General and Administrative Expenses

 

General and administrative (“G&A”) expenses consist primarily of personnel and facilities costs related to executives, finance, human resources, information technology, as well as certain human capital and related costs generally included in manufacturing that are being utilized to set-up operations associated with workflow, regulatory compliance, materials, service, quality, and legal organizations, as well as legal fees for professional and contract services. G&A expenses for the three months ended June 30, 2018 were approximately $1,400,000 as compared to approximately $160,000 for the same period last year, representing an increase of approximately $1,240,000, or 774%. The primary reasons for the increase in the current period was due to a $530,000 increase in salary and benefits associated with developing our manufacturing, materials, service, quality and compliance, and other operations, a $304,000 increase in expenses associated with being a public company (investor relations, insurance, and professional fees), a $105,000 increase in supplies and materials, a $72,000 increase in computer expenses associated with new hires and moving into the new facility, an $87,000 increase in depreciation expense, a $41,000 increase in rent and utilities associated with the new facility and an $81,000 increase in other costs associated with the build out of operations.

 

Interest Expense

 

Interest expense for the three months ended June 30, 2018 was approximately $17,000, as compared to $11,000 during the three months ended June 30, 2017. The increase in interest expense was due to increasing balances of equipment capital leases.

 

Six months ended June 30, 2018 versus six months ended June 30, 2017

 

Revenues

 

We had approximately $86,000 in revenue, comprising of $84,000 in revenue from the sales of our vehicles and approximately $2,000 in revenue from merchandise and outside metal fabrication during the six-month period ended June 30, 2018. There was no such revenue from the sale of our vehicles for the six-month period ended June 30, 2017 with us receiving only $40,580 of grant revenue.

 

Operating Expenses

 

Research and Development Expenses

 

R&D expenses consist primarily of personnel costs for our engineering and research teams as well as prototyping materials expense. R&D expenses for the six months ended June 30, 2018 and 2017 were approximately $1,411,000 and $532,000, respectively. The primary reasons for the increase in R&D expenses of approximately $880,000, or 165%, include an increase in engineering salaries and benefits of approximately $553,000, an increase in R&D materials expense of approximately $200,000, an increase in computer expense for new employees of approximately $49,000, an increase in tools and equipment expense of approximately $44,000 and an increase in shipping cost of approximately $21,000.

 

 

Sales and Marketing Expenses

 

S&M expenses for the six months ended June 30, 2018 and 2017 were approximately $774,000 and $235,000, respectively. The primary reasons for the increase in S&M expenses during the six months ended June 30, 2018 of approximately $538,000 or 229%, as compared to the prior period was a $319,000 increase in public relations, marketing, and travel expenses associated with public company investor relations, a $138,000 increase in salary and benefits expenses, and a $68,000 increase in lobbying expense.

 

General and Administrative Expenses

 

G&A expenses consist primarily of personnel and facilities costs related to executive, finance, human resources, IT, as well as certain human capital and related costs generally included in manufacturing that are being utilized to set-up operations associated with workflow, regulatory compliance, materials, service, quality, and legal organizations, as well as legal fees for professional and contract services. G&A expenses for the six months ended June 30, 2018 were approximately $2,042,000 as compared to approximately $347,000 for the same period last year, representing an increase of approximately $1,695,000, or 488%. The primary reasons for the increase in the current period were a $582,000 increase in salary and benefits associated with developing our manufacturing, materials, service, quality and compliance, and other operations, a $521,000 increase in expenses associated with being a public company (investor relations, insurance, and professional fees), a $160,000 increase in depreciation expense, a $139,000 increase in computer expenses associated with new hires and moving into the new facility, a $132,000 increase in manufacturing supplies expense, and a $98,000 increase in rent and utilities associated with the new facility.

 

Interest Expense

 

Interest expense for the six months ended June 30, 2018 was approximately $21,000, as compared to $21,000 during the six months ended June 30, 2017.

  

Liquidity and Capital Resources 

 

As of June 30, 2018, we had approximately $2,137,000 in cash and cash equivalents and another $5,248,000 in certificates of deposits with maturities between three and nine months representing a decrease in cash and cash equivalents and certificate of deposits of approximately $6,687,000 from December 31, 2017. Sources of cash were predominantly from the sale of equity. We anticipate that our current sources of liquidity, including cash and cash equivalents, together with our current projections of cash flow from operating activities, may provide us with liquidity through year end. We may raise funds in the future, including with potential equity or debt offerings, subject to market conditions and recognizing that we cannot be certain that additional funds would be available to us on favorable terms or at all. The amount and timing of funds that we may raise is undetermined and would vary based on a number of factors, including our liquidity needs as well as access to current and future sources of liquidity.

 

Our estimates for tooling and manufacturing capital expenditures for our current FUV production facility will require approximately $4,816,000, of which approximately $4,316,000 has been expended to date. We anticipate utilizing the remaining $500,000 by the end of the third quarter 2018.

 

Cash Flows from Operating Activities

 

Our cash flows from operating activities are significantly affected by our cash outflows to support the growth of our business in areas such as R&D, sales and marketing and G&A expenses. Our operating cash flows are also affected by our working capital needs to support personnel related expenditures, accounts payable and other current assets and liabilities.

 

During the six months ended June 30, 2018, cash used in operating activities was approximately $5,890,000, which was primarily the result of our net loss incurred of approximately $4,217,000, an increase in other current assets of $449,000, a decrease in accounts payable of approximately $664,000 and an increase in inventories of approximately $1,096,000 related to materials for our electric vehicles. These increases in cash outflows were partially offset by stock-based compensation of $165,000.

 

 

Cash Flows from Investing Activities

 

Cash flows from investing activities primarily relates to the purchases and redemptions of certificates of deposits and capital expenditures to support our growth in operations, including investments in manufacturing equipment and tooling. During the six months ended June 30, 2018, the Company purchased and redeemed $5,250,000 and $6,250,000 of certificates of deposits, respectively, and paid approximately $709,000, net of financing, for manufacturing equipment and tooling. The Company had no such purchases or redemptions of certificates of deposits or capital expenditures during the six months ended June 30, 2017.

 

Cash Flows from Financing Activities

 

During the six months ended June 30, 2018, net cash used in financing activities was approximately $49,000, compared to net cash provided of $1,366,000 during the six months ended June 30, 2017. Cash flows used in financing activities during the six months ended June 30, 2018 mainly comprised of payments on capital lease obligations amounting to approximately $78,000, and proceeds from the issuance of our common stock through the exercise of employee stock options of approximately $29,000.  Cash flows provided by financing activities during the six months ended June 30, 2017 consisted primarily of $1,226,000 in gross proceeds from our Regulation D offering of 245,100 shares of Series A Preferred Stock as well as proceeds from the issuance of convertible debt of $200,000.

 

Item 3. Quantitative and Qualitative Disclosures About Market Risk.

 

Not applicable.

 

Item 4. Controls and Procedures.

 

(a)  Evaluation of Disclosure Controls and Procedures

 

Under the supervision and with the participation of our management, including Mark Frohnmayer, our President and Chief Executive Officer, and Douglas M. Campoli, our Chief Financial Officer, we conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, as of the end of the period covered by this report. 

 

In designing and evaluating our disclosure controls and procedures, management recognizes that any disclosure controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives. In addition, the design of disclosure controls and procedures must reflect the fact that there are resource constraints and that management is required to apply its judgment in evaluating the benefits of possible controls and procedures relative to their costs.

 

Based on management’s evaluation, our President and Chief Executive Officer and our Chief Financial Officer concluded that as of June 30, 2018, our disclosure controls and procedures were designed to, and were effective to, provide assurance at a reasonable level that the information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms, and that such information is accumulated and communicated to our management, including our President and Chief Executive Officer and our Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosures as of June 30, 2018.

 

(b) Changes in Internal Control Over Financial Reporting

 

Under the supervision and with the participation of our management, including our President and Chief Executive Officer and our Chief Financial Officer, we conducted an evaluation of any changes in our internal controls over financial reporting (as such terms are defined in Rules 13a-15(f) and 15d-15(f)) under the Exchange Act that occurred during the quarter ended June 30, 2018. Based on that evaluation, our President and Chief Executive Officer and Chief Financial Officer concluded that there has not been any material change in our internal control over financial reporting occurred during the period ended June 30, 2018, that materially affected, or is reasonably likely to materially affect, our internal control over financial reporting. 

 

 

PART II - OTHER INFORMATION

 

Item 1. Legal Proceedings.

 

From time to time, we might become involved in lawsuits, claims, investigations, proceedings, and threats of litigation relating to intellectual property, commercial arrangements and other matters arising in the ordinary course of our business. For information on our litigation matters, see “Litigation” under Note 9 of the Notes to Financial Statements included in Part I, Item 1 of this Quarterly Report on Form 10-Q, which is incorporated by reference herein.

 

Item 1A. Risk Factors.

 

Smaller reporting companies such as us are not required to provide the information required by this item.

 

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds. 

 

None.

  

Item 3. Defaults Upon Senior Securities.

 

None.

 

Item 4. Mine Safety Disclosures.

 

Not applicable.

 

Item 5. Other Information.

 

None.

 

 

Item 6.  Exhibits.

 

EXHIBIT INDEX

 

Exhibit				Incorporated by Reference (Unless Otherwise Indicated)
Number		Exhibit Description		Form		File No.		Exhibit		Filing Date
10.4		Arcimoto, Inc. 2018 Omnibus Stock Incentive Plan.		8-K				10.4		June 13, 2018
10.5		Form of Notice of Stock Option Grant.		8-K				10.5		June 13, 2018
10.6		Form of Restricted Stock Award Agreement.		8-K				10.6		June 13, 2018
31.1		Certification of President and Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.		—		—		—		Filed herewith
31.2		Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.		—		—		—		Filed herewith
32.1		Certification of President and Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.		—		—		—		Filed herewith
101.INS		XBRL Instance Document.		—		—		—		Filed herewith
101.SCH		XBRL Taxonomy Extension Schema Document.		—		—		—		Filed herewith
101.CAL		XBRL Taxonomy Extension Calculation Linkbase Document.		—		—		—		Filed herewith
101.DEF		XBRL Taxonomy Extension Definition Linkbase Document.		—		—		—		Filed herewith
101.LAB		XBRL Taxonomy Extension Label Linkbase Document.		—		—		—		Filed herewith
101.PRE		XBRL Taxonomy Extension Presentation Linkbase Document.		—		—		—		Filed herewith

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

	ARCIMOTO, INC.
Date: August 14, 2018	By:	/s/ Mark Frohnmayer
		Mark Frohnmayer
		President and Chief Executive Officer

 

 

20