UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

[X]

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For quarterly period ended March 31, 2016

[   ]

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _____ to _____

Commission file number: No. 0-24368

FLEXPOINT SENSOR SYSTEMS, INC.

(Exact name of registrant as specified in its charter)

106 West Business Park Drive, Draper, Utah  84020

(Address of principal executive offices)

801-568-5111

(Registrant’s telephone number)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   Yes [X]   No [  ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes [ X ]   No [  ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.:

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act.

Yes [   ]     No [X]

The number of shares outstanding of the registrant’s common stock was 71,627,114 as of May 16, 2016.

1

TABLE OF CONTENTS

PART I: FINANCIAL INFORMATION

PART II: OTHER INFORMATION

PART I - FINANCIAL INFORMATION

ITEM 1.  CONDENSED FINANCIAL STATEMENTS

The financial information set forth below with respect to our condensed consolidated financial position as of March 31, 2016, the condensed consolidated statements of operations for the three months ended March 31, 2016 and 2015, and cash flows for the three months ended March 31, 2016 and 2015 are unaudited. The information presented below for the condensed consolidated financial position as of December 31, 2015 was audited and reported as part of our annual filing of our Form 10-K, filed with Securities and Exchange Commission on April 14, 2016. The results of operations for the three   months ended March 31, 2016 and 2015, respectively, are not necessarily indicative of results to be expected for any subsequent periods.

2

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

 CONDENSED CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these condensed consolidated financial statements

3

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(UNAUDITED)

 The accompanying notes are an integral part of these condensed consolidated financial statements

4

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

 CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(UNAUDITED)

The accompanying notes are an integral part of these condensed consolidated financial statements

5

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

NOTE 1– SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Condensed Consolidated Interim Financial Statements – The accompanying unaudited condensed consolidated financial statements include the accounts of Flexpoint Sensor Systems, Inc. and its subsidiaries (the “Company”). These financial statements are condensed and, therefore, do not include all disclosures normally required by accounting principles generally accepted in the United States of America. Therefore, these statements should be read in conjunction with the most recent annual consolidated financial statements of Flexpoint Sensor Systems, Inc. and subsidiaries for the year ended December 31, 2015 included in the Company’s Form 10-K filed with the Securities and Exchange Commission on April 14, 2016. In particular, the Company’s significant accounting principles were presented as Note 1 to the Consolidated Financial Statements in that report. In the opinion of management, all adjustments necessary for a fair presentation have been included in the accompanying condensed consolidated financial statements and consist of only normal recurring adjustments. The results of operations presented in the accompanying condensed consolidated financial statements are not necessarily indicative of the results that may be expected for the full year ending December 31, 2016.

Nature of Operations – The Company is located near Salt Lake City, in Draper, Utah and is a company engaged principally in designing, engineering, and manufacturing sensor technology products and equipment using Bend Sensors^® flexible potentiometer technology. The Company suffered losses of $469,375 and $478,687 and used cash in operating activities of $138,012 and $129,406 during the three months ended March 31, 2016 and 2015, respectively. Through March 31, 2016, the Company had an accumulated deficit of $24,439,002. These matters raise doubt about the Company's ability to continue as a going concern. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should the Company be unable to continue as a going concern.

Cash and Cash Equivalents – Cash and cash equivalents are considered to be cash and highly liquid securities with original maturities of three months or less. The cash and equivalents of $32,779 at March 31, 2016 and $22,706 at December 31, 2015 represent cash on deposit in various bank accounts with a financial institution.   

Fair Value of Financial Instruments - The carrying amounts reported in the balance sheets for accounts receivable, accounts payable and accrued liabilities approximate fair value because of the immediate or short-term nature of these financial instruments. The carrying amounts reported for notes payable approximate fair value because the underlying instruments are at interest rates that approximate current market rates.

Accounts Receivable – Trade accounts receivable are recorded at the time product is shipped or services are provided, including any shipping and handling fees, and are shown net of the allowance for bad debts. Due to the limited amount of transactions, collectability of the trade receivables is reasonably assured.  While the Company has historically experienced very minimal bad debts it felt it prudent to create an allowance for doubtful accounts to provide for any risk associated with bad debts on current receivables.

Most contracts associated with design and development engineering require a deposit of up to 50% of the quoted price of the initial phase of such contracts prior to the commencement of work. As the Company completes each phase or milestone of such a contract additional funding is normally required from the customer. These deposits are considered deferred income until each phase or milestone is completed and accepted by the customer, at which time the agreed upon price for that particular phase of the contract is billed to the customer and the deposit applied.

Inventories – Inventories are stated at the lower of cost or market. Cost is determined by using the first in, first out (FIFO) method.  Inventories consist of raw materials.

Property and Equipment – Property and equipment are stated at cost.  Additions and major improvements are capitalized while maintenance and repairs are charged to operations.  Upon trade-in, sale, or retirement of property and equipment, the related cost and accumulated depreciation are removed from the accounts and any gain or loss is recognized.

6

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

Valuation of Long-lived Assets – The carrying values of the Company’s long-lived assets are reviewed for impairment quarterly and whenever events or changes in circumstances indicate that they may not be recoverable. When projections indicate that the carrying value of the long-lived asset is not recoverable, the carrying value is reduced by the estimated excess of the carrying value over the projected discounted cash flows. The Company’s analysis did not indicate any impairment of assets as of March 31, 2016.

Intangible Assets – Costs to obtain or develop patents are capitalized and amortized over the remaining life of the patents, and technology rights are amortized over their estimated useful lives. The Company currently has the rights to several patents and proprietary technology.  Patents and technology are amortized from the date the Company acquires or is awarded the patent or technology rights, over their estimated useful lives, which range from 5 to 15 years.  An impairment charge is recognized if the carrying amount is not recoverable and the carrying amount exceeds the fair value of the intangible assets as determined by projected discounted net future cash flows. The Company’s analysis did not indicate any impairment of intangible assets as of March 31, 2016.

Research and Development – Research and development costs are recognized as an expense during the period incurred until the conceptual formulation, design, and testing of a process is completed and the process has been determined to be commercially viable.

Goodwill – Goodwill represents the excess of the Company’s reorganization value over the fair value of net assets of the Company upon emergence from bankruptcy. Goodwill is not amortized, but is tested for impairment annually, or when a triggering event occurs. As described in ASC 360, the Company has adopted the two step goodwill impairment analysis that includes quantitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is necessary to perform the two-step goodwill impairment test. A fair-value-based test is applied at the overall Company level. The test compares the estimated fair value of the Company at the date of the analysis to the carrying value of its net assets. The analysis also requires various judgments and estimates, including general and macroeconomic conditions, industry and the Company’s targeted market conditions, as well as relevant entity-specific events; such as a change in the market for the Company’s products and services. After considering the qualitative factors that would indicate a need for interim impairment of goodwill and applying the two-step process described in ASC 360, management has determined that the value of Company’s assets is not more likely than not less than the carrying value of the Company including goodwill, and that no impairment charge needs be recognized during the reporting periods.

Revenue Recognition – Revenue is recognized when persuasive evidence of an arrangement exists, services have been provided or goods delivered, the price to the buyer is fixed or determinable and collectability is reasonably assured. Revenue from the sale of products is recorded at the time of shipment to the customers.  Revenue from research and development engineering contracts is recognized as the services are provided and accepted by the customer.  Revenue from contracts to license technology to others is deferred until all conditions under the contracts are met and then recognized as licensing royalty revenue over the remaining term of the contracts.

Stock-Based Compensation – Under ASC Topic 718, Stock Compensation, the Company is required to recognize the cost of employee services received in exchange for stock options and awards of equity instruments based on the grant-date fair value of such options and awards, over the period they vest.   

Basic and Diluted Earnings (loss) Per Share – Basic earnings (loss) per share is computed by dividing net income (loss) by the weighted-average number of common shares outstanding during the period.  Diluted earnings per share is computed by dividing net earnings (loss) by the weighted-average number of common shares and dilutive potential common shares outstanding during the period. At March 31, 2016, there were outstanding common share equivalents (options and convertible notes payable) which amounted to 21,720,103 shares of common stock.  These common stock equivalents were not included in the computation of diluted loss as their effect would be anti-dilutive.  Other convertible notes and options-related exercise prices were less than the average market price of the common stock.

7

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

Concentrations and Credit Risk - The Company has a major customer who represents a significant portion of revenue, accounts receivable and notes receivable.  During the three months ended March 31, 2016, the customer represented 28% of sales and represents 84% of accounts receivable and 100% of notes receivable at March 31, 2016. The Company has a strong relationship with this customer and does not believe this concentration poses a significant risk, as their products are based entirely on the Company’s technologies.  The Company has the option, under one of the notes receivable, to convert the principal and interest into equity of the customer.

Recent Accounting Pronouncements - In February 2016, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update ("ASU") 2016-02, “Leases.”  This ASU requires lessees to put most leases on their balance sheets but recognize expenses in the income statement in a manner similar to current accounting treatment.  This ASU changes the guidance on sale-leaseback transactions, initial direct costs and lease execution costs, and, for lessors, modifies the classification criteria and the accounting for sales-type and direct financing leases.  For public business entities, this ASU is effective for annual periods beginning after December 15, 2018, and interim periods therein.  Entities are required to use a modified retrospective approach for leases that exist or are entered into after the beginning of the earliest comparative period in the financial statements.  The Company is currently evaluating the impact of this ASU on its financial statements and disclosures.

In March 2016, the FASB issued ASU 2016-09, “Improvements to Employee Share-Based Payment Accounting.” This ASU simplifies several aspects of the accounting for share-based payment transactions, including the income tax consequences, classification of awards as either equity or liabilities, and classification on the statement of cash flows.  The guidance is effective for fiscal years beginning after December 15, 2016, although early adoption is permitted.  The Company is currently evaluating the impact of this ASU on its financial statements and disclosures.

The Company has reviewed all other recently issued, but not yet adopted, accounting standards in order to determine their effects, if any, on its consolidated results of operation, financial position and cash flows.  Based on that review, the Company believes that none of these pronouncements will have a significant effect on its current or future earnings or operations.

NOTE 2 – NOTES RECEIVABLE

On June 23, 2010, the Company, along with David B. Beck, the Company's Director of Engineering, filed a complaint against R&D Products, LLC, Persimmon Investments, Inc. and Jules A. deGreef, the managing member of R&D Products, LLC. The complaint alleged that all of the intellectual properties owned by R&D Products and Mr. deGreef, specifically patented applications using Bend Sensor^® technology that were filed jointly by Mr. Beck and Mr. deGreef, and later assigned solely to Mr. deGreef and R&D Products, are the property of the Company. The assignment by Mr. Beck of his rights in the patents and intellectual properties were improperly given and are the property of the Company. The Company believed that since Mr. Beck was an employee of the Company during the time that he became the primary creative force and inventor of the Bend Sensor^® applications for R&D Products and Mr. deGreef, and the inventions and applications were created using Flexpoint resources, the Company claimed that such intellectual properties, patents, etc. filed by deGreef, Persimmon and R&D belong to Flexpoint and therefore is sought financial damages and ownership of all intellectual rights, patents and inventions created by Mr. Beck for deGreef, Persimmon and R&D Products.  

On April 9, 2013, the parties of the above referenced litigation reached a favorable universal settlement agreement that reinforces the Company's rights to the intellectual properties and their related products, including the medical bed. In order to secure the Company had exclusive rights to all patents and intellectual properties associated with this litigation the Company advanced to Mr. deGreef $25,000 to bring current all of the filing and maintenance fees for the patents detailed in the law suit. The advance is secured by a promissory note with an annual interest rate of 10% to be paid no later than December 31, 2015.  The Company is currently evaluating actions it should take relative to this note receivable which is in default.  

On April 1, 2015, the Company paid $51,157 for the assumption and assignment of a convertible promissory note receivable issued by Bend Tech, LLC (“Bend Tech”; one of the Company’s customers – see also Note 1, Concentrations and Credit Risk) and held by a third-party Bend Tech investor (“the Investor”).  The note bears

8

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

interest at the rate of 10% per annum and had a maturity date of April 1, 2015.  The agreement allows the holder, at its option, to convert the note to a 5% ownership of Bend Tech.  The Company elected to take assignment of those conversion rights, reaching an agreement with the Investor to pay the principal and interest to the Investor at the due date.  Bend Tech is expected to become a more significant customer of the Company as it begins its product introductions, and the Company elected to pay off the note and put itself in position to either receive the payment plus interest or convert the note into ownership of Bend Tech rather than have an outside investor make such conversion.  As of the date of this report, the note is in default and the Company has not exercised its conversion option.

NOTE 3 – CONVERTIBLE NOTES PAYABLE

Convertible Notes Payable

During 2015, the Company secured additional financing to cover its ongoing operations in the amount of $590,000 by issuing various convertible notes bearing 10% annual interest (15% default interest), secured by business assets and carrying exercise prices ranging between $0.025 and $0.07 per share. Additionally during 2015, the Company issued $51,000 for a non-convertible note payable bearing 10% annual interest (15% default interest) and secured by the $51,157 note receivable held by the Company (see Note 2). During 2015, all of these notes (both convertible and non-convertible issued in 2014 and 2015) and accrued interest were either converted into common stock or extinguished and consolidated into two remaining convertible notes payable to two investors in principal amounts of $684,660 and $123,797 (with respective maturity dates of December 31, 2016 and November 30, 2016). Both notes are convertible at $0.05 per share, bear 10% annual interest rates (15% default interest) and are secured by business assets.

On January 20, 2016, the Company entered into a promissory convertible note with Capital Communications LLC for up to $300,000 which is expected to be funded in tranches of $50,000 for each of the six months thereafter.  Accordingly, on January 26, 2016, February 26, 2016 and March 31, 2016, the Company received proceeds for an aggregate total of $150,000 from Capital Communications LLC. The note has an annual interest rate of 10% and is secured by the Company's business equipment. The principal amount of the note, and all accrued interest is due and payable on or before December 31, 2016 and each note has a conversion feature for restricted common shares at $0.06 per share.

At March 31, 2016, the Convertible Notes Payable principal is $998,457, the unamortized discount is $616,077 and interest accrued and unpaid is $49,217.  The Company recorded interest expense of $198,275 during the three months ended March 31, 2016 as it amortized the discount charges generated by the issuance of convertible notes payable.

Convertible Note Payable Related Party

On August 8, 2011, the Company entered into a convertible note payable with a Company Director for $40,000. This note is due on December 31, 2015, bears an annual interest rate of 10% annual interest (15% default interest) and is secured by business equipment.

NOTE 4 – STOCK OPTION PLANS

On August 25, 2005, the Board of Directors of the Company approved and adopted the 2005 Stock Incentive Plan (the Plan). The Plan became effective upon its adoption by the Board and will continue in effect for ten years, unless terminated.  This plan was approved by the stockholders of the Company at their annual meeting of shareholders on November 22, 2005. Under the Plan, the exercise price for all options issued will not be less than the average quoted closing market price of the Company’s trading common stock for the thirty day period immediately preceding the grant date plus a premium of ten percent.  The maximum aggregate number of shares that may be awarded under the plan is 2,500,000 shares.  The Company continues to utilize the Black-Scholes option-pricing model for calculating the fair value of the options granted as defined by ASC Topic 718, which is an acceptable valuation approach under ASC 718. This model requires the input of subjective assumptions, including the expected price volatility of the underlying stock.

9

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

On August 24, 2015, the Board of Directors approved the issuance of options to purchase 2,185,000 shares of the Company’s common stock.  Of the total issued, 1,960,000 options were issued to replace options held by directors and employees which were to expire and 225,000 options were issued to new employees.  Of the options issued, 640,000 have an option price of $0.14 per share, 900,000 have an option price of $0.15 per share, 595,000 have an option price of $0.20 per share, and 50,000 have an option price of $0.25 per share.  Options issued as replacement shall have immediate vesting terms. Options which are not replacements shall vest over a two year four month period in equal installments on the last day of 2015, 2016 and 2017, respectively.  We relied on an exemption from the registration requirements provided by Section 4(a)(2) of the Securities Act.

Projected data related to the expected volatility and expected life of stock options is based upon historical and other information, and notably, the Company's common stock has limited trading history. Changes in these subjective assumptions can materially affect the fair value of the estimate, and therefore, the existing valuation models do not provide a precise measure of the fair value of the Company's employee stock options.  Between August 25, 2005 and December 31, 2015, the Company granted options to employees to purchase an aggregate 3,096,000 shares of common stock at exercise prices ranging from $0.14 to $2.07 per share.  The options vest over three years and expire 10 years from the date of grant.  The Company used the following assumptions in estimating the fair value of the options granted:

·

Market value at the time of issuance – Range of $0.14 to 2.07

·

Expected term – Range of 3.7 years to 10.0 years

·

Risk-free interest rate – Range of 1.60% to 4.93%

·

Dividend yield – 0%

·

Expected volatility – 200% to 424%

·

Weighted-average fair value - $0.16 to $2.07

As of the three months ended March 31, 2016 and the years ended December 31, 2005 through 2015, the Company recognized a total of $2,398,185 of stock-based compensation expense, leaving $37,698 in unrecognized expense as of March 31, 2016. There were 2,185,000 and 2,185,000 employee stock options outstanding at March 31, 2016 and December 31, 2015, respectively.  

A summary of all employee options outstanding and exercisable under the plan as of March 31, 2016, and changes during the three months then ended is set forth below:

NOTE 5 – CAPITAL STOCK

Preferred Stock – There are 1,000,000 shares of preferred stock with a par value of $0.001 per share authorized.  At March 31, 2016 and December 31, 2015, there were no shares of preferred stock issued or outstanding.

10

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

Common Stock – There are 100,000,000 shares of common stock with a par value of $0.001 per share authorized.  No shares of stock were issued during the three months ended March 31, 2016.  

On January 12, 2015, the Board of Directors approved the conversion of $165,000 in convertible notes held by Capital Communications LLC, plus $33,023 in interest accrued and unpaid, to 2,800,000 shares of restricted common stock at an average conversion price of $0.07 per share

On January 20, 2015, the Board of Directors approved the conversion of $135,000 in convertible notes held by Empire Fund Managers, plus $23,760 in interest accrued and unpaid, to 2,650,000 shares of restricted common stock at an average conversion price of $0.06 per share.

In October 2015, the Board of Directors approved the issuance of 3,400,000 shares of restricted common stock to extinguish $330,000 in accrued liabilities arising from investor relations services, at an average price of $0.084 per share.

In November and December 2015, the Board of Directors approved the conversion of $470,000 in convertible notes to 9,400,000 shares of restricted common stock.   

NOTE 6 - COMMITMENTS AND CONTINGENCIES

The Company currently occupies a manufacturing facility in Draper, Utah. The lease on the facility expired on December 31, 2014, at which time the Company entered into a three year extension which will expire on December 31, 2017.  Either party may terminate the lease upon 90 day written notice.  Under the terms of the lease the Company paid $8,950 per month in 2015 (the same rate as in 2014), and will pay $9,300 per month in 2016 and $9,600 per month in 2017.

In September 2005 the Company entered into a manufacturing agreement with R&D Products, LLC, a Utah limited liability company, doing business in Midvale, Utah.  For the purpose of this contract, management considers R&D Products to be a related party because a controlling member of R&D Products, LLC is also a non-controlling shareholder of Flexpoint Sensor Systems, Inc.  R&D Products has developed a mattress with multiple air chambers that uses the Company’s Bend Sensors^® and the Company has entered into an agreement to manufacture the Bend Sensors^® for R&D’s specific mattress use.  The initial order is for 30,000 Bend Sensors^® to be used to begin manufacture of 1,000 mattresses.  During 2007 and 2008 R&D Products deposited with Flexpoint the sum of $100,000 to begin work on the initial production order of 20 commercial beds.  Additional revenue from this contract is dependent upon R&D Products selling either their bed technology directly or licensing their technology to a third party.

On September 11, 2008 R&D Products, LLC entered into a long-term Licensing Agreement for their bed technology with a major medical solutions provider (Licensee). The Agreement provides the Licensee the exclusive world–wide rights to R&D’s patented medical bed technology. On that same day the Company, R&D Products and the Licensee entered into a long-term joint manufacturing agreement for R&D’s medical bed technology and related products. The manufacturing agreement allows for the Company to manufacture sensors for the bed technology and related medical products through 2018 with an option to renew each year thereafter. Production schedules with specific quantities and deadlines are still being outlined. (See Note 2). At this time management is unsure the effect their litigation with R&D will have on this agreement with R&D or its Licensee.  

The Company is currently evaluating actions it should take relative to the notes receivable referenced in Note 2, which are in default.  

NOTE 7 – RELATED PARTY TRANSACTIONS

At March 31, 2016 and December 31, 2015, the Company had accounts payable of $3,035 and $322 to its Chief Executive Office for reimbursement of various operating expenses paid by him in the course of business.

11

FLEXPOINT SENSOR SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

NOTE 8 - SUBSEQUENT EVENTS

On April 29, 2016 the Company drew $50,000 against a convertible promissory note for up to $300,000 from a third party, the proceeds of which will be used to fund operating expenses. The note has an annual interest rate of 10% and is secured by the Company’s equipment. The note has a conversion feature for restricted common shares at $.06 per share and a maturity date of December 31, 2016.  

[REMAINDER OF PAGE INTENTIONALLY LEFT BLANK]

12

In this quarterly report references to “Flexpoint", "the Company," “we,” “us,” and “our” refer to Flexpoint Sensor Systems, Inc. and its subsidiaries.

FORWARD LOOKING STATEMENTS

The U.S. Securities and Exchange Commission (“SEC”) encourages reporting companies to disclose forward-looking information so that investors can better understand future prospects and make informed investment decisions.  This report contains these types of statements. Words such as “may,” “expect,” “believe,” “anticipate,” “estimate,” “project,” or “continue” or comparable terminology used in connection with any discussion of future operating results or financial performance identify forward-looking statements.  You are cautioned not to place undue reliance on the forward-looking statements, which speak only as of the date of this report.  All forward-looking statements reflect our present expectation of future events and are subject to a number of important factors and uncertainties that could cause actual results to differ materially from those described in the forward-looking statements.

ITEM 2.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

EXECUTIVE OVERVIEW

Flexpoint Sensor Systems, Inc. is an innovative technology firm specializing in developing products that feature the Company’s patented Bend Sensor^® and related technology.  The Bend Sensor^® is a groundbreaking sensing solution that is revolutionizing applications in the automobile, safety, medical and industrial industries.  The Bend Sensor’s single-layer, thin film construction cuts costs and mechanical bulk while introducing a range of functions and stylistic design possibilities that have never before been available in sensing technology.  We currently own six patents and through our research and development, efforts are in the process of filing for more that include fully integrated products being sold and supplied to our limited customer base. We have also jointly developing additional commercially viable products, including a universal sensor that will be used in the automotive, medical and industrial industries.

Our plan for the balance of 2016 is to concentrate our marketing efforts and limited financial resources on current projects that we believe can be brought to market in the shortest period of time. In July 2015 we announced the hiring of Mr. Paul Sexauer as a Vice President of Sales and Marketing with the intent of accelerating the introduction of our products into multiple markets.  Since the hiring of Mr. Sexauer the Company has streamlined its efforts to work directly with customers, expand sales pipelines and finalize deals.  We anticipate introducing additional products featuring our patented Bend Sensor^® technology into the market during 2016, including products in the medical, sport shoe, residential home care and industrial control industries.

We continue to develop new types of products for our Bend Sensor^® technologies and continue to receive small repeat production orders from existing customers. We have made improvements on our initial prototype for a Home Monitoring Presence Detection System using our Bend Sensor^® technologies and have received development and design orders from various industries.  We have continued to work with market makers and Tier I automotive suppliers in the U.S and Europe on numerous other applications for our sensors and devises.   Based upon our discussions within the automotive industry in the U.S. and Europe our unique sensor systems meet the requirements for manufacturers to have lighter weight, more fuel efficient cars.  Our Bend Sensor^® is lighter in weight, has fewer moving parts than conventional sensing devices, is more versatile and, due to its unique design is more cost effective. Product and design changes in the automotive industry are slow, averaging two to three years before actually being incorporated into a commercially viable automotive platform. Because of our recent work with several Tier 1 suppliers, we have shown the Bend Sensor^® to be viable as the next generation of sensing devises to the industry. Due to the advanced technology of the Bend Sensor^® and its versatility of applications, we anticipate being a part of the changes taking place in the automotive, energy and technological industries.

In January 2016 the Company issued a press release detailing its accomplishments during 2015 and providing guidance relating to objectives and markets it has targeted for 2016.   There has been increased activity in a number of these markets, which have resulted in additional press releases to keep the Company’s investors and the investor community at large updated.

13

In January 2016 the Company announced it has entered into a contract to co-develop a specialized Industrial Internet of Things (“IIOT”) application with a specialty equipment manufacturer in the energy industry.  The customer designs, manufacturers and maintains “special use” equipment employed by hundreds of power companies to produce electricity and fulfill the real-time demands of the grid.

The Company made two additional announcements through press releases in February 2016.  The first announced that it will partner with HTK Engineering, LLC, (“HTK”) on the go to market strategy development and sales execution of HTK’s anti-rollaway safety system.  Rollaways occur weekly across a multitude of industries causing significant property damage and, in some cases personal injury and loss of life.  The other release announced the progress rapidly being made on products in the toy industry and the rapidly growing wearables industries.

In March 2016 the Company issued an update on progress under the HTK project.  A controls and distribution agreement  has been entered into with New Eagle, who will serve as the primary supplier of controller systems (hardware and software) for the patented BrakeAlert system developed by HTK.  The system features Flexpoint’s custom Bend Sensor^®.

The Company has issued additional press releases in April 2016.  The first announced that full scale production for a number of different toy models will begin in June 2016.  Annualized sensor order volumes are expected to be between 750,000 and 1,000,000 units in 2016, with significant annual increases thereafter.  

The second release in April 2016 announced a conference call for investors held on April 19, 2016, during which the Company updated investors and the investor community on developments.  During the call, the Company highlighted significant progress of Bend Sensor® driven technologies and projected revenue success in 2016. The Company noted that we were increasingly receiving orders from repeat and new customers from around the world and across industries. Flexpoint has completed or is on track to complete previously stated goals and the following contributors will allow the Company to achieve these previously stated cash flow and revenue goals:

·

Orders from a Fortune 100 global toy manufacturer with production products scheduled to hit consumer markets in late 2016.

·

An expanding number of wearables/gloves customers.

·

Rapid commercialization success of the recently patented HTK Safety Anti-Rollaway System with which Flexpoint has taken on a critical and expended sales and marketing leadership role.

·

A Tier 1 automotive manufacturer featuring the patented Flexpoint Horn Actuation system Haemoband, a European based medical device manufacturer which is expected to be successfully completing new product certification trials in mid/late 2016 and moving rapidly into mass production.

Also in April 2016, the Company announced a strategic partnership for the development of technology to allow computers to have any shape or form through flexible displays and other non-flat display technologies.  It is anticipated that the actuation of these technologies may be enabled in large part through the integration of next generation materials, the Flexpoint Bend Sensor® technology and advanced power and electronics designs/techniques.

Our patented technology continues to gain recognition in various markets and industries as evidenced by the recent receipt of an initial production order from CPS Color Equipment S.p.A Italy and orders from a Fortune 100 automotive maker for our horn system.  Although, so far the volumes for our applications and devises have been relatively small we continue to receive follow up orders for the universal sensor that we jointly developed last year. We expect to receive additional orders from other customers for this sensor as it becomes more recognizable in the market. Currently our customers for this type of sensor include companies in the following industries: automobiles, trucking, emergency vehicles, public transportation, military and other governmental entities. As anticipated, the Company is beginning to see the potential for more significant volumes and revenues from the sale of this sensing devise over the next year and beyond.

Finalizing additional long-term revenue generating production contracts with other customers remains our greatest challenge because our on-going business is dependent on the types of revenues and cash flows generated by such contracts. Cash flow and cash requirement risks are closely tied to, and are dependent upon, our ability to attract significant long-term production contracts.  In the short term, we must continue to obtain funding to operate and expand our operations so that we can deliver our unique Bend Sensor^® and Bend Sensor^® related technologies and products to the market.  Management believes that even though we have made positive strides forward with our business plan, it is likely that significant progress may not occur for the next three to six months, primarily due to

14

the time it takes for negotiating such contracts.  Accordingly, we cannot guarantee that we will realize significant revenues or that we will become profitable over the next six to nine months.

LIQUIDITY AND CAPITAL RESOURCES

Our revenue is primarily from design, contract, testing and limited production services and is not to a level to support our operations.  Management anticipates that we may not realize significant revenue within the next three to nine months.

Management believes that our current cash burn rate is approximately $60,000 per month and the proceeds from the convertible notes and our engineering and design fees will not totally fund our anticipated growth in operations. We will therefore need to raise additional financing. We believe that this additional financing will provide the needed capital to extend operations to the development and production of our growing product offerings and growing manufacturing opportunities. However, we may not be able to obtain financing, or the sources of financing, if any, may not continue to be available, and if available, they may be on terms unfavorable to us.

As we enter into production and development agreements, we must ensure that those agreements provide adequate funding for any pre-production research and manufacturing costs. As we are successful in establishing agreements with adequate initial funding, management believes that our operations for the long term will be funded by revenues, licensing fees and/or royalties related to these agreements. However, other than the recent development agreement with Bend Tech that we believe will provide future revenues, we have not formalized any additional agreements during the past year and there can be no assurance that the agreements we currently have will come to fruition in the near future or that a desired technological application can be brought to market on a commercially viable basis.

FINANCIAL OBLIGATIONS AND CONTINGENT LIABILITIES

Our principal commitments at March 31, 2016 consisted of our operating lease of $9,300 per month, and total liabilities of $1,028,162, which includes $382,380 of convertible notes payable, net of discounts of $616,077.  Accrued liabilities at March 31, 2016, were $474,318 and were related to payroll, payroll tax liabilities, accrued professional expenses, accrued insurance expense, accrued interest expense on notes and accrued paid time off.  

During the three months ending March 31, 2016, the Company has raised an additional $150,000 in operating capital through the issuance of short-term notes to a third party.  The notes have an annual interest rate of 10% and a default rate of 15% annually. The notes, which total $958,457, are secured by the Company’s business equipment and have a conversion feature for restricted common shares at $0.05 and $0.06 per share with maturity dates of November 30 and December 31, 2016.

The Company has a major customer, Bend Tech, LLC, represents a significant portion of revenue, accounts receivable and notes receivable.  During the three months ended March 31, 2016, the customer represented 28% of sales, represents 84% of accounts receivable and 100% of notes receivable at March 31, 2016.  The Company has a strong relationship with this customer and does not believe this concentration poses a significant risk, as their products are based entirely on the Company’s technologies.  The Company has the option, under one of the notes receivable, to convert the principal and interest into equity of the customer.

OFF-BALANCE SHEET ARRANGEMENTS

Other than our current operating lease, we have not entered into any off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources and would be considered material to investors.

CRITICAL ACCOUNTING ESTIMATES

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Estimates of particular significance in our financial statements include goodwill and the annual tests for impairment of goodwill and long-lived assets and valuing stock option compensation.  

15

The Company's goodwill represents the excess of its reorganization value over the fair value of the net assets upon emergence from bankruptcy. Goodwill is not amortized, therefore we test our goodwill for impairment annually or when a triggering event occur using a fair value approach. A fair value based test is applied at the overall Company level. The test compares the fair value of the Company to the carrying value of its nets assets. The test requires various judgments and estimates. During 2015 and for the three months ending March 31, 2016, the Company recorded no impairment charge to reduce the carrying value of the goodwill to its estimated fair value. As part of the impairment testing, the Company considered factors such as the global market volatility, variables in the economy, and the overall uncertainty in the markets which has resulted in a decline in the market price of the Company's stock price and market capitalization for a sustained period, as indicators for potential goodwill impairment. Based upon our analysis for the impairment test for the three months ended March 31, 2016 compared the carrying value of the Company's net assets to the estimated fair value of the overall Company, and the present values of projected net cash flows of the Company over the next three years, no impairment was recognized during the three months ended March 31, 2016.

We test long-lived assets for impairment annually or when a triggering event occurs. Impairment is indicated if undiscounted cash flows are less than the carrying value of the assets. The amount of impairment is measured using a discounted-cash-flows model considering future revenues, operating costs and risk-adjusted discount rate and other factors. The analysis compares the present value of projected net cash flows for the remaining current year and next two years against the carrying value of the long-lived assets. If the carrying values of the long lives assets exceed the present value of the discounted projected revenues an impairment expense would be recognized in the period and the carrying value of the assets would be adjusted accordingly. Under similar analysis no impairment charge was taken during the three month period ended March 31, 2016. Impairment tests will be conducted on a quarterly basis and, should they indicate a carrying value in excess of fair value, additional charges may be required.

Financial accounting standards require that recognition of the cost of employee services received in exchange for stock options and awards of equity instruments be based on the grant-date fair value of such options and awards and is recognized as an expense in operations over the period they vest. The fair value of the options we have granted is estimated at the date of grant using the Black-Scholes American option-pricing model. Option pricing models require the input of highly sensitive assumptions, including expected stock volatility. Also, our stock options have characteristics significantly different from those of traded options, and changes in the subjective input assumptions can materially affect the fair value estimate.  Management believes the best input assumptions available were used to value the options and that the resulting option values are reasonable. For the three month periods ended March 31, 2016 and 2015 we recognized $8,401 and $0, respectively, of stock-based compensation expense for our stock options and there is no additional unrecognized compensation cost related to employee stock options at the current time.

RESULTS OF OPERATIONS

The following discussions are based on the consolidated operations of Flexpoint Sensor Systems, Inc. and should be read in conjunction with our unaudited financial statements for the three months ended March 31, 2016 and 2015, included in Part I, Item 1, above, and the audited financial statements included in the Company’s annual report on Form 10-K for the years ended December 31, 2015 and 2014.

THREE MONTH PERIOD ENDED MARCH 31, 2016:

For the three months ending March 31, 2016 revenue was $35,165, a $3,165 increase when compared to the same period in 2015. The majority of the revenue for this period came from billable engineering services. The Company continues to concentrate its marketing resources on a limited number of customers that have the greatest potential to generate the most short-term revenue while still building relationships with our larger customers. Management

16

believes this approach has the highest potential to bring long-term commercially viable products to market and will provide sustainable cash flow to fund the Company's operations in the future. Currently, overall revenues are not sufficient to sustain our operations.  Management anticipates that revenues will increase as we continue to execute our long-term business plan and cultivate larger customer bases with our existing product offering. However, until a long-term production contract is in place there is no guarantee that our current customer base will order in sufficient volumes to sustain our operations. Therefore, management continues to work with larger companies and industries and is hopeful that in the near future we will sign a long-term licensing or manufacturing contract.

We received revenue from design contract, development engineering, limited production and repeat orders from our existing customers. Revenue from research and development engineering contracts is recognized as the services are provided and accepted by the customer. Revenue from contracts to license technology to others is deferred until all conditions under the contract are met and then the sale is recognized as licensing royalty revenue over the remaining term of the contract. Revenue from the sale of a product is recorded at the time of shipment to the customer.  

Of the $282,564 and $256,539 total operating costs and expense for the three months ending March 31, 2016 and 2015, respectively, $80,059 and $66,420 were for direct research and development cost, respectively. For the three months ended March 31, 2016, total operating expenses increased by $26,025 when compared to the same period in 2015, due primarily to the addition of another engineer to assist in product development.  

Other expense for the three month period ended March 31, 2016 was $221,976, a $32,172 decrease compared to the same period in 2015.  The decrease is attributable to the beneficial conversion charges on the convertible notes.    

A net loss of $469,375 was realized for the three months ended March 31, 2016.  A net loss of $478,687 was realized for the three month period ended March 31, 2015.

The chart below represents a summary of our condensed consolidated balance sheets at March 31, 2016 and December 31, 2015.

Cash and cash equivalents increased by $10,073 at March 31, 2016 compared to December 31, 2015. The increase in cash is due to the timing of payment of expenses, collection of accounts receivable and proceeds from borrowings. Our non-current assets decreased at March 31, 2016 due to the amortization of long-lived assets.

Total liabilities increased by $407,054 at March 31, 2016; the increase was primarily due to the funding of operations through the issuance of convertible notes payable, the accrued interest related to those notes, and accruals for investor relations and insurance expenses.

INFLATION

We do not expect the impact of inflation on our operations to be significant for the next twelve months.

ITEM 3.  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable to smaller reporting companies.

17

ITEM 4.  CONTROLS AND PROCEDURES

(a)

Disclosure Controls and Procedures

As of the end of the period covered by this quarterly report, under the supervision and with the participation of our Chief Executive Officer and Principal Financial Officer, we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures. Our Chief Executive Officer and Principal Financial Officer evaluated whether information required to be disclosed is recorded, processed, summarized and reported within the specified periods, and is accumulated and communicated to management to allow for timely decisions regarding required disclosure of material information required to be included in our periodic Securities and Exchange Commission reports. Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their objectives and our Chief Executive Officer and Principal Financial Officer have concluded that our disclosure controls and procedures were effective for the three-month period ending March 31, 2016.

(b)

Changes in Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act). Management reviewed our internal controls over financial reporting, and there have been no changes in our internal controls over financial reporting for the three month period ended March 31, 2016 that have materially affected, or are likely to affect, our internal controls over financial reporting.

PART II - OTHER INFORMATION

ITEM 1A.  RISK FACTORS

We have a history of losses and may never become profitable.