LIQUIDMETAL TECHNOLOGIES INC - FORM 10-Q

Attached files

file	filename
EX-3.1 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex3-1.htm
EX-10.5 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex10-5.htm
EX-10.2 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex10-2.htm
EX-10.4 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex10-4.htm
EX-31.2 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex31-2.htm
EX-32.1 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex32-1.htm
EX-10.3 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex10-3.htm
EX-31.1 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex31-1.htm
EX-32.2 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex32-2.htm
EX-10.1 - LIQUIDMETAL TECHNOLOGIES INC	v199432_ex10-1.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

x	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended September 30, 2010

OR

¨	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission File No. 001-31332

LIQUIDMETAL TECHNOLOGIES, INC.

(Exact name of Registrant as specified in its charter)

Delaware		33-0264467
(State or other jurisdiction of		(I.R.S. Employer
incorporation or organization)		Identification No.)

30452 Esperanza

Rancho Santa Margarita, CA 92688

(Address of principal executive office, zip code)

Registrant’s telephone number, including area code: (949) 635-2100

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes x No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such

files).

Yes ¨ No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ¨

Accelerated filer ¨

Non-accelerated filer ¨

Smaller reporting company x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes ¨ No x

The number of common shares outstanding as of November 4, 2010 was 84,849,172.

LIQUIDMETAL TECHNOLOGIES, INC.

FORM 10-Q

FOR THE QUARTER ENDED SEPTEMBER 30, 2010

FORWARD-LOOKING INFORMATION

Statements in this report concerning the future sales, expenses, profitability, financial resources, product mix, market demand, product development and other statements in this report concerning the future results of operations, financial condition and business of Liquidmetal Technologies, Inc. are "forward-looking" statements as defined in the Securities Act of 1933 and the Securities Exchange Act of 1934. Investors are cautioned that the Company's actual results in the future may differ materially from those projected in the forward-looking statements due to risks and uncertainties that exist in the Company's operations and business environment, including competition, the need for increased acceptance of products, our ability to continue to develop and extend our brand identity, our ability to anticipate and adapt to a competitive market, ability to effectively manage rapidly expanding operations, the amount and timing of operating costs and capital expenditures relating to expansion of our business, our operations and infrastructure, our ability to provide superior customer service, our dependence upon key personnel and the like. The Company's most recent filings with the Securities and Exchange Commission, including our Annual Report on Form 10-K for the year ended December 31, 2009, contain additional information concerning many of these risk factors, and copies of these filings are available from the Company upon request and without charge.

TABLE OF CONTENTS

PART I - Financial Information

Item 1 – Financial Statements	4
Condensed Consolidated Balance Sheets (unaudited)	4
Condensed Consolidated Statements of Operations and Comprehensive Income (Loss) (unaudited)	5
Condensed Consolidated Statements of Shareholders’ Deficiency (unaudited)	6
Condensed Consolidated Statements of Cash Flows (unaudited)	7
Notes to Condensed Consolidated Financial Statements (unaudited)	9

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations	23

Item 3 – Quantitative and Qualitative Disclosures about Market Risk	28

Item 4 – Controls and Procedures	28

PART II – Other Information

Item 1 – Legal Proceedings	29

Item 1A – Risk Factors	29

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds	29

Item 3 – Defaults Upon Senior Securities	29

Item 4 – Removed and Reserved	29

Item 5 – Other Information	29

Item 6 – Exhibits	29

Signatures	31

PART I

FINANCIAL INFORMATION

Item 1 – Financial Statements

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

(in thousands, except share data)

	September 30,			December 31,
	2010			2009
	(unaudited)
ASSETS

Current assets:
Cash and cash equivalents	$	3,157		$	151
Trade accounts receivables, net of allowance for doubtful accounts of $0 and $1,314		1,142			1,180
Inventories		948			982
Prepaid expenses and other current assets		731			594
Total current assets		5,978			2,907

Property, plant and equipment, net		5,168			5,668
Other intangibles, net		1,156			1,232
Other assets		390			633
Total assets		12,692			10,440

LIABILITIES AND SHAREHOLDERS' DEFICIENCY

Current liabilities:
Accounts payable and accrued expenses		6,452			9,111
Deferred revenue		39			31
Short-term debt		415			896
Long-term debt, current portion		-			1,393
Warrant liabilities		26,786			3,975
Conversion feature liabilities		-			444
Other liabilities, current portion		133			141
Total current liabilities		33,825			15,991

Long-term debt, net of current portion		9,850			12,661
Other long-term liabilities, net of current portion		647			155
Total liabilities		44,322			28,807

Shareholders' deficiency:
Liquidmetal Technologies, Inc. shareholders' deficiency
Preferred stock, $0.001 par value; 10,000,000 shares authorized; 2,486,095 and 3,183,663 shares issued and outstanding as of both September 30, 2010 and December 31, 2009		3			4
Common stock, $0.001 par value; 300,000,000 shares authorized; 84,763,338 and 47,583,102 shares issued and outstanding as of both September 30, 2010 and December 31, 2009		79			48
Additional paid-in capital		147,120			142,135
Accumulated deficit		(180,827	)		(162,777	)
Accumulated other comprehensive income		1,442			1,441
Total Liquidmetal Technologies, Inc. shareholders' deficiency		(32,183	)		(19,149	)
Noncontrolling interest		553			782
Total shareholders' deficiency		(31,630	)		(18,367	)

Total liabilities and shareholders' deficiency	$	12,692		$	10,440

The accompanying notes are an integral part of the condensed consolidated financial statements.

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)

(in thousands, except per share data)

(unaudited)

	For the Three Months Ended						For the Nine Months Ended
	September 30,						September 30,
	2010			2009			2010			2009

Revenue	$	17,309		$	4,209		$	22,213		$	11,320
Cost of sales		1,604			2,909			5,376			6,945

Gross profit		15,705			1,300			16,837			4,375

Operating expenses
Selling, general, and administrative		2,444			1,341			5,088			4,286
Research and development		331			349			804			897
Total operating expenses		2,775			1,690			5,892			5,183

Income (loss) from operations		12,930			(390	)		10,945			(808	)

Loss from extinguishment of debt		-			-			-			(1,471	)
Change in value of warrants, (loss) gain		(27,199	)		2,015			(24,361	)		8,138
Change in value of conversion feature, gain		15			474			444			1,434
Other income		18			-			81			-
Interest expense		(2,504	)		(1,055	)		(5,053	)		(4,760	)

Net (loss) income before income taxes		(16,740	)		1,044			(17,944	)		2,533

Income taxes		-			(75	)		-			(120	)

Net (loss) income		(16,740	)		969			(17,944	)		2,413

Net loss attributable to noncontrolling interest		114			39			250			59

Net (loss) income attributable to Liquidmetal Technologies, Inc.		(16,626	)		1,008			(17,694	)		2,472

Other comprehensive (loss) income:
Foreign exchange translation gain		108			393			1			316
Comprehensive (loss) income	$	(16,518	)	$	1,401		$	(17,693	)	$	2,788

Per common share basic and diluted:
Net (loss) income attributable to Liquidmetal Technologies, Inc. - basic	$	(0.23	)	$	0.02		$	(0.31	)	$	0.05
Net (loss) income attributable to Liquidmetal Technologies, Inc. - diluted	$	(0.23	)	$	0.01		$	(0.31	)	$	0.01

Number of weighted average shares - basic		72,928			46,595			56,329			45,610
Number of weighted average shares - diluted		72,928			192,404			56,329			191,418

The accompanying notes are an integral part of the condensed consolidated financial statements.

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF SHAREHOLDERS' DEFICIENCY

For the Nine Months Ended September 30, 2010

(in thousands, except per share data)

(unaudited)

	Liquidmetal Technologies, Inc.
	Preferred Shares			Common Shares		Preferred Stock			Common Stock		Additional Paid-in Capital			Accumulated Deficit			Accumulated Other Compre- hensive Income (Loss)		Non- controlling Interest			Total

Balance, December 31, 2009		3,183,663			47,583,102		4			48		142,135			(162,777	)		1,441		782			(18,367	)
Conversion of preferred stocks		(697,568	)		17,219,681		(1	)		17		(16	)		-			-		-			-
Conversion of warrants		-			4,849,775		-			5		2,547			-			-		-			2,552
Restricted shares issued		-			13,870,307		-			8		2,038			-			-		-			2,046
Common stock issued in lieu of cash		-			907,141		-			1		116			-			-		-			117
Conversion of notes payable		-			333,332		-			-		200			-			-		-			200
Dividends		-			-		-			-		-			(356	)		-		-			(356	)
Minority interest contribution in a subsidiary		-			-		-			-		-			-			-		21			21
Stock-based compensation		-			-		-			-		100			-			-		-			100
Foreign exchange translation gain (loss)		-			-		-			-		-			-			1		-			1
Net ( loss)		-			-		-			-		-			(17,694	)		-		(250	)		(17,944	)
Balance, September 30, 2010		2,486,095			84,763,338		3			79		147,120			(180,827	)		1,442		553			(31,630	)

The accompanying notes are an integral part of the condensed consolidated financial statements.

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands, except per share data)

(unaudited)

	For the Nine Months Ended September 30,
	2010			2009

Operating activities:
Net (loss) income attributable to Liquidmetal Technologies, Inc.	$	(17,694	)	$	2,472

Adjustments to reconcile loss (income) from operations to net cash provided for (used in) operating activities:
Gain on disposal of asset		51			-
Loss attributable to noncontrolling interest of consolidated subsidiary		(250	)		(59	)
Depreciation and amortization		868			772
Loss on extinguishment of debt		-			1,471
Amortization of debt discount		3,522			2,633
Stock-based compensation		101			262
Bad debt expense		61			29
Warranty recovery		(176	)		(92	)
Loss (gain) from change in value of warrants		24,361			(8,138	)
Gain from change in value of conversion feature		(444	)		(1,434	)

Changes in operating assets and liabilities:
Trade accounts receivable		(22	)		(142	)
Inventories		35			(292	)
Prepaid expenses and other current assets		(137	)		(240	)
Other assets		(52	)		(306	)
Accounts payable and accrued expenses		(2,018	)		1,213
Deferred revenue		8			11
Other liabilities		485			(14	)
Net cash provided by (used in) operating activities		8,699			(1,854	)

Investing Activities:
Purchases of property and equipment		(190	)		(412	)
Investment in patents and trademarks		(29	)		(277	)
Net cash used in investing activities		(219	)		(689	)

Financing Activities:
Proceeds from borrowings		9,563			13,747
Repayment of borrowings		(17,274	)		(26,520	)
Proceeds from issuance of convertible preferred stocks		-			15,328
Proceeds from issuance of comon stocks		2,046			-
Warrants exercised		1,002			-
Cash distributions		-			(9	)
Minority interest in subsidiary's joint venture		21			-
Net cash (used in) provided by financing activities		(4,642	)		2,546
Effect of foreign exchange translation		(832	)		(39	)
Net increase (decrease) in cash and cash equivalents		3,006			(36	)

Cash and cash equivalents at beginning of period		151			157
Cash and cash equivalents at end of period	$	3,157		$	121

The accompanying notes are an integral part of the condensed consolidated financial statements.

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS – (Continued)

(in thousands, except per share data)

(unaudited)

During the nine months ended September 30, 2010, $200 of the Company’s 8% Senior Convertible Notes due January 2011 was converted into 333,332 shares of the Company’s common stock at a conversion price of $0.60 per share.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

1. Basis of Presentation / Description of Business

The accompanying condensed balance sheet as of December 31, 2009, which has been derived from audited financial statements, and the unaudited interim condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for interim financial information and with the instructions to Form 10-Q. Accordingly, they do not include all of the information and notes required by generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting only of normal recurring accruals) considered necessary for a fair presentation have been included. All intercompany balances and transactions have been eliminated. Operating results for the nine months ended September 30, 2010 are not necessarily indicative of the results that may be expected for any future periods or the year ending December 31, 2010. The accompanying unaudited condensed consolidated financial statements should be read in conjunction with the Company's Form 10-K filed with the Securities and Exchange Commission on August 20, 2010.

Liquidmetal Technologies, Inc. (“Liquidmetal Technologies”) and its subsidiaries (collectively “the Company”) are in the business of developing, manufacturing, and marketing products made from amorphous alloys. Liquidmetal Technologies markets and sells Liquidmetal® alloy industrial coatings and also manufactures, markets and sells products and components from bulk Liquidmetal alloys that can be incorporated into the finished goods of its customers across a variety of industries. The Company also partners with third-party licensees and distributors to develop and commercialize Liquidmetal alloy products.

The Company classifies operations into two reportable segments: Liquidmetal alloy industrial coatings and bulk Liquidmetal alloys (see Note 10). Liquidmetal alloy industrial coatings are used primarily as a protective coating for industrial machinery and equipment, such as drill pipes used by the oil drilling industry and boiler tubes used by coal-burning power plants. Bulk Liquidmetal alloys include potential market opportunities to manufacture and sell products and components for electronic devices, medical devices, defense applications, and sporting goods. In addition, the bulk Liquidmetal alloys segment includes tooling and prototype sampling. Furthermore, such alloys are used to generate research and development services revenue for developing uses related primarily to defense and medical applications as well as potential license fees, royalties, and other compensation from strategic partnering transactions.

In July 2007, the Company transferred substantially all of the assets of its Liquidmetal alloy industrial coatings business to a newly formed, newly capitalized subsidiary named Liquidmetal Coatings, LLC, a Delaware limited liability company (“LMC”), and LMC assumed substantially all of the assets and liabilities of the coatings business. The transfer included the thermal spray coatings assets and liabilities acquired under a purchase agreement with Foster Wheeler Energy Services in June 2007. The Company initially held a 69.25% ownership interest in LMC, however, during 2010, LMC failed to redeem its preferred units by the specified time and was required to issue additional shares to its noteholders. (See Note 9) As a result, the Company’s ownership interest in LMC decreased to 66.56%. The results of operation of LMC are consolidated and comprise our Liquidmetal alloy industrial coatings segment for financial reporting purposes.

In May 2010, LMC entered into a joint venture agreement with IMCO Alloys Private Limited (“IMCO”) to create a subsidiary named Liquidmetal Coatings Solutions India Private Limited (“LMCSI”) and engage in application services of Liquidmetal products as a protective coating. Initially, under the joint venture agreement, LMC held 80% and IMCO held 20% of the outstanding Class A Shares of LMCSI. LMC may, at its option, subscribe to Class B Shares of the Company. In September 2010, LMC provided approximately $80 in capital equipment and was issued 358,204 Class B Shares of LMCSI. As a result, LMC holds 88.6% and IMCO holds 11.4% ownership interest in LMCSI as of September 30, 2010.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

2. Basis of Presentation and Recent Accounting Pronouncements

Translation of Foreign Currency

The Company applies Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 830, Foreign Currency, for translating foreign currency into US dollars in our consolidation of the financial statements. Upon consolidation of the Company’s foreign subsidiaries into the Company’s consolidated financial statements, any balances with the subsidiaries denominated in the foreign currency are translated at the exchange rate at period-end. The financial statements of Liquidmetal Technologies Korea have been translated based upon Korean Won as the functional currency. Liquidmetal Technologies Korea’s assets and liabilities were translated using the exchange rate at period end and income and expense items were translated at the average exchange rate for the reporting period. The resulting translation adjustment was included in other comprehensive (loss) income.

Recent Accounting Pronouncements

In January 2010, the FASB issued new authoritative guidance to require additional disclosures for fair value measurements including the following: (1) amounts transferred in and out of Level 1 and 2 fair value measurements, which is effective for interim and annual reporting periods beginning after December 15, 2009 (“Part I”), and (2) activities in Level 3 fair value measurements including purchases, sales, issuances and settlements, which is effective for interim and annual reporting periods beginning after December 15, 2010 (“Part II”). The Company adopted Part I of the revised guidance for fair value measurements disclosures, which did not have a significant effect on our unaudited Condensed Consolidated Financial Statements as of the beginning of fiscal 2010.

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on our Company's present or future consolidated financial statements.

3. Liquidity

The Company has experienced losses from continuing operations during the last three fiscal years and has an accumulated deficit of $180,827 as of September 30, 2010. Cash provided by operations for the nine months ended September 30, 2010 was $8,699. As of September 30, 2010, the Company’s principal source of liquidity is $3,157 of cash and $1,142 of trade accounts receivable.

On May 1, 2009, the Company completed a financing transaction (the “Transaction”) whereby aggregate cash of $2,500 and principal and accrued interest of $20,625 due under the previously issued 8% Convertible Subordinated Notes due January 2010 (the “Prior Notes”) were exchanged for 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share, 2,625,002 shares of Series A-2 Preferred Stock with an original issue price of $5.00 per share, and $7,500 of new 8% Senior Secured Convertible Subordinated Notes due January 3, 2011 (the “January 2011 Notes”). The Transaction was consummated pursuant to a Securities Purchase and Exchange Agreement, dated May 1, 2009, among the exchanging note holders and investors. On August 5, 2010, the Company repaid in full all principal and interest on the January 2011 Notes. All security interests in Company assets securing such obligations under the January 2011 Notes were released and terminated. (See Note 7)

On May 28, 2010, the Company issued $2,000 of 13% Subordinated Promissory Note (“January 2011 Subordinated Note”) due on the earlier date of January 3, 2011 or the date on which all outstanding amounts are due under the Company’s 8% January 2011 Notes. On August 5, 2010, the Company repaid in full all principal and accrued interest of $2,046 on the January 2011 Subordinated Note. In connection with the repayment, on August 10, 2010, the Company entered into a Subscription Agreement pursuant to which the Company issued 7,870,307 shares of the Company’s common stock to the noteholder for an aggregate price of $2,046. (See Note 7)

On August 5, 2010, the Company entered into a licensing agreement with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Upon closing of the foregoing transaction, the Company was paid a portion of the license fee which was used to pay off noteholders and fund operations. 90 days after the closing date and upon completion of certain support milestones, the Company shall be paid the remaining portion of the license fee.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

As of September 30, 2010, the Company has outstanding liens on assets of its South Korean subsidiary by various creditors in South Korea for past-due trade payables totaling $2,175, which are held by creditors in South Korea, as of September 30, 2010. The Company is currently working to resolve the matter with each creditor by seeking a forbearance or compromise. If it cannot repay the amounts due or obtain forbearance or compromise, the creditors may seek to foreclose on the Company’s assets located in Korea.

4. Fair Value of Financial Instruments

The fair value of cash and cash equivalents and trade receivables approximates its carrying value due to its short maturity. The estimated fair value of long-term debt was determined by discounting future cash flows using rates currently available to us for debt with similar terms and remaining maturities.

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

Level 1 —	Quoted prices in active markets for identical assets or liabilities;

Level 2 —	Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

Level 3 —	Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

The following table summarizes the financial liabilities measured at fair value on a recurring basis as of September 30, 2010 and December 31, 2009:

	Level	September, 2010		December 31, 2009
Warrant Liabilities	2	$	26,786	$	3,975
Conversion Feature Liabilities	2	$	-	$	444

The warrant liabilities and conversion feature liabilities are recorded at fair value based on upon valuation models with utilize relevant factors such as expected life, volatility of the Company’s stock prices, risk free interest and dividend rate.

The Company calculated that the estimated fair value of the long term debt is not significantly different than the carrying value of the debt.

5. Inventories

Inventories are accounted for using the moving average basis and at standard cost, which approximate cost on a first-in, first-out basis and are valued at the lower of cost or market. Inventories were comprised of the following:

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

	September 30,		December 31,
	2010		2009
	(Unaudited)

Raw materials	$	632	$	675
Work in process		88		94
Finished goods		228		213
Total inventories	$	948	$	982

6. Product Warranty

Management estimates product warranties as a percentage of certain bulk alloy product sales earned during the period. As of September 30, 2010, the Company used 5% of bulk alloy product sales as an estimate of warranties to be claimed. The percentage is based on industry averages and historical information. Additionally, as of September 30, 2010 the Company used 1% of coatings applications sales as estimates of warranties to be claimed.

During the three and nine months ended September 30, 2010, the Company recorded $28 and $176 of net gain on warranty, respectively. During the three and nine months ended September 30, 2009, the Company recorded $0 and $92 of net gain on warranty, respectively. The warranty accrual balance is included in accounts payable and accrued expenses.

7. Notes Payable

Unsecured Subordinated Notes

On May 17, 2006, September 21, 2006, and December 1, 2006, the Company issued 8% Unsecured Subordinated Notes due August 2007 in the aggregate principal amount of $4,584 (the “August 2007 Subordinated Notes”). The August 2007 Subordinated Notes are unsecured and became due August 2007, of which $3,575 were retired during 2007 and 2008. During 2009, the Company retired $750 of the August 2007 Subordinated Notes, and on August 5, 2010, the Company retired the remaining $259 of the August 2007 Subordinated Notes.

Interest expense for the August 2007 Subordinated Notes were $2 and $55 for the three and nine months ended September 30, 2010, respectively. Interest expense for the August 2007 Subordinated notes were $5 and $41 for the three and nine months ended September 30, 2009, respectively. As of September 30, 2010 and December 31, 2009, the Company’s gross outstanding loan balance of the August 2007 Subordinated Notes totaled $0 and $259, respectively, and was included in current portion of long-term debt.

On May 28, 2010, the Company issued $2,000 of 13% Subordinated Promissory Note (“the January 2011 Subordinated Note”) due on the earlier date of January 3, 2011 or the date on which all outstanding amounts are due under the Company’s 8% January 2011 Notes. On August 5, 2010, the Company repaid in full all principal and accrued interest of $2,046 on the January 2011 Subordinated Note. In connection with the repayment, on August 10, 2010, the Company entered into a Subscription Agreement pursuant to which the Company issued 7,870,307 shares of the Company’s common stock for an aggregate price of $2,046.

Secured Convertible Subordinated Notes

During 2007, 2008, and 2009, the Company issued 8% Convertible Subordinated Notes due January 2010 in the aggregate principal amount of $17, 300 (The “January 2010 Notes”) and an additional aggregate amount of $3,009 for accrued interest. On May 1, 2009, the January 2010 Notes were retired as part of a financing transaction (see “Senior Secured Convertible Notes” below).

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

The Company’s gross outstanding loan balance of the January 2010 Notes totaled $0 as of both September 30, 2010 and December 31, 2009. As of both September 30, 2010 and December 31, 2009, un-amortized discounts for conversion feature, warrants, and cash discount totaled $0, and other asset debt issuance costs totaled $0. Interest expense for the amortization of debt issuance cost and discount on note was $0 for both the three and nine months ended September 30, 2010. Interest expense for the amortization of debt issuance cost and discount on note was $0 and $1,816 for the three and nine months ended September 30, 2009, respectively.

Pursuant to FASB ASC 815, Derivatives and Hedging, the Company is required to report a value of the conversion liability as a fair value and record the fluctuation to the fair value of the conversion feature liability to current operations. The change in the fair value of the conversion feature liability resulted in gains of $0 for both the three and nine months ended September 30, 2010, respectively. The change in the fair value of the conversion feature liability resulted in losses of $0 and $1,137 for three and nine months ended September 30, 2009, respectively.

Senior Secured Convertible Notes

On May 1, 2009, the Company completed a financing transaction (the “Transaction”) whereby aggregate cash of $2,500 and principal and accrued interest of $20,625 due under the previously issued 8% Convertible Subordinated Notes due January 2010 (the “January 2010 Notes”) were exchanged for 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share, 2,625,002 shares Series A-2 Preferred Stock with an original issue price of $5.00 per share, and $7,500 of new 8% Senior Secured Convertible Notes due January 2011 (the “January 2011 Notes”). The Transaction was consummated pursuant to a Securities Purchase and Exchange Agreement, dated May 1, 2009 (the “Securities Purchase Agreement”), among the exchanging note holders and investors (collectively, the “Buyers”).

The redemption of the previously issued January 2010 Notes was treated as an extinguishment of debt in accordance with Emerging Issues Task Force No. 96-19, “Debtors Accounting for a Modification or Exchange of Debt Instruments.” The Transaction resulted in a $2,029 loss from extinguishment of debt, which consisted of write down of $503 other asset deferred issue costs, $5,487 debt discount, $1,306 decrease in conversion feature liability of the extinguished notes, $2,347 decrease in warrant liability from the warrants redeemed from holders of the January 2011 Notes, and $308 write off of accrued fees.

The January 2011 Notes were due January 3, 2011 and bear annual interest rate of 8% with interest payable in October and April in cash or, at the Company’s option, in the form of additional notes (in which case the interest rate will be 10%). In November 1, 2009 and May 1, 2010, the Company issued $378 and $391, respectively, of additional January 2011 Notes for accrued interest due under the notes in lieu of cash payments. On August 5, 2010, the Company repaid in full all principal and interest on the January 2011 Notes in the amount of $8,242, and all security interest in the company assets securing such obligations under the January 2011 Notes were released and terminated.

The Series A-1 Preferred Stock, Series A-2 Preferred Stock, and January 2011 Notes are convertible into the Company’s common stock at conversion price of $0.10, $0.22, and $0.60 per common share, respectively. During the three and nine months ended September 30, 2010 59,000 and 638,568 of the Company’s Series A-2 Preferred Stocks, respectively, were converted into 333,333 and 14,512,909 of the Company’s common stocks, respectively. The Company issued warrants to purchase 3,125,007 shares and 42,329,407 shares of the Company’s common stock at an exercise of $0.60 and $0.50 per share to the buyers of the January 2011 Notes and preferred stocks, respectively. During both the three and nine months ended September 30, 2010, 4,849,775 of warrants were exercised into the Company’s common stocks. Unexercised warrants will expire on January 3, 2012. The conversion prices and the number of common stock issuable under the preferred stocks, January 2011 Notes and warrants are subject to adjustments for anti-dilution purposes. (See Note 14)

The preferred stocks accrue cumulative dividends at an annual rate of 8%, which is payable semi-annually. Beginning on the second anniversary of the initial issuance, the dividend will increase to 10%. In conjunction with the Series A-1 Preferred Stock conversion during the three months ended September 30, 2010, the Company granted in-kind dividends to the preferred stocks holders, which were simultaneously converted into 1,365,863 of common stocks. As of September 30, 2010, the Company has accrued dividends of $1,063 included in accounts payable and other accrued expenses. The dividends are payable in cash or in kind by the issuance of the Company of additional preferred stock, only when and as declared by the Company’s Board of Directors.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

Pursuant to Statement of Financial Accounting Standards No. 133, “Accounting for Derivative Instruments and Hedging Activities,” EITF 00-19, “Accounting for Derivative Financial Instruments Indexed to, and Potentially Settled in, a Company’s Own Stock,” EITF 00-27, “Application of Issue No. 98-5 to Certain Convertible Instruments,” and EITF 05-2 “The Meaning of ‘Conventional Convertible Debt Instrument’ in EITF Issue No. 00-19,” the original fair value of the embedded conversion feature of $3,367 have been recorded as conversion feature liability as the debt is considered nonconventional convertible debt. The original fair value was computed using the Black-Scholes model under the following assumptions: (1) expected life of 1.68 years; (2) volatility of 176%; (3) risk free interest of 0.92% and dividend rate of 0%. In addition, the Company is required to report a value of the conversion liability as a fair value and record the fluctuation to the fair value of the conversion feature liability to current operations.

The change in the fair value of the conversion feature liability resulted in gains of $15 and $444 for the three and nine months ended September 30, 2010, respectively. The change in the fair value of the conversion feature liability resulted in gains of $474 and $2,572 for the three and nine months ended September 30, 2009, respectively. The fair value of conversion feature outstanding at September 30, 2010 and December 31, 2009 was $0 and $444, respectively. The fair value of conversion feature outstanding at December 31, 2009 was computed using the Black-Scholes model under the following assumptions: (1) expected life of 1.01 years; (2) volatility of 152%, (3) risk free interest of 0.5% and dividend rate of 0%.

Pursuant to EITF 00-19, “Accounting for Derivative Financial Instruments Indexed to, and Potentially Settled in, a Company’s Own Stock”, the original fair values of the warrants of $14,773 have been recorded as warrant liability, which was computed using the Black-Scholes pricing model under the following assumptions: (1) expected life of 2.67 years; (2) volatility of 176%; (3) risk free interest of 1.39% and (4) dividend rate of 0%.

The original fair value of the embedded conversion feature of $3,367 was recorded as discounts on the convertible notes and the original fair value of the warrants issued to buyers of the January 2011 Notes of $999 was recorded as discounts of the convertible notes. The original fair value of warrants issued to buyers of preferred stocks of $13,774 was recorded as reduction of additional paid-in capital. In addition, the Company incurred $440 of direct costs relating to the Transaction, of which $143 of was recorded as debt issuance cost in other assets relating to issuance of the convertible notes and $297 was recorded as reduction of additional paid-in capital relating to the issuance of the preferred stocks.

The Company’s gross outstanding loan balance of the January 2011 Notes totaled $0 and $7,878 as of September 30, 2010 and December 31, 2009, respectively. As of September 30, 2010 and December 31, 2009, un-amortized discounts for conversion feature and warrants totaled $0 and $3,227, respectively, and other asset debt issuance costs totaled $0 and $104, respectively. Interest expense for the amortization of debt issuance cost and discount on note was $1,960 and $2,994 for the three and nine months ended September 30, 2010, respectively. Interest expense for the amortization of debt issuance cost and discount on note was $441 and $696 for the three and nine months ended September 30, 2009, respectively.

Factoring Agreement

The Company entered into a Factoring, Loan, and Security Agreement (the “Agreement”) with a financing company on April 21, 2005. All borrowings were secured by outstanding receivables specifically assigned to the financing company. In June 2009, the Company received a formal notice of default from the financing company for repayment of the outstanding loan. On August 5, 2010, the Company terminated the Agreement and repaid in full all principal and interest on the Agreement in the amount of $309. All security interest in Company assets securing such obligations under the factoring loan were released and terminated.

For the nine months ended September 30, 2010, the Company borrowed $3 and repaid $287 under the Agreement. The total outstanding advance made under the agreement is $0 and $284 as of September 30, 2010 and December 31, 2009, respectively, which is presented as short-term debt.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

Debt of Majority Owned Subsidiary

On July 24, 2007, the Company completed an $11,500 financing transaction (the “Transaction”) that provided funding to repay convertible notes previously issued by the Company that were scheduled to become due in July and August 2007. In the Transaction, the Company transferred substantially all of the assets of the Company’s Liquidmetal Coatings division to a newly formed, newly capitalized subsidiary named Liquidmetal Coatings, LLC, a Delaware limited liability company (“LMC”), and LMC assumed substantially all of the liabilities of the division.

LMC was capitalized through a $6,500 subordinated debt and equity investment by C3 Capital Partners (“C3”) and a $5,000 senior credit facility with Bank Midwest, N.A. This debt and equity resulted in cash proceeds of $11,102 after related debt issuance costs of $398, which proceeds LMC used to purchase all of the assets and liabilities from the Company. The Company incurred an additional $459 in issuance costs directly related to the debt issuance. As a result, $857 was recorded as deferred debt issuance costs to be amortized over the life of the debt. Interest expense for the amortization of debt issuance cost was $100 and $190 for the three and nine months ended September 30, 2010, respectively. Interest expense for the amortization of debt issuance cost was $42 and $121 for the three and nine months ended September 30, 2009, respectively.

The Company retains a 66.56% ownership interest in LMC, C3 holds a 22.15% ownership interest, Larry Buffington, the Company’s former President and CEO, (who also serves as the President and CEO of LMC) holds a 9.61% ownership interest, and CRESO Capital Partners (“CRESO”), the Company’s financial advisor in the Transaction, holds a 1.68% ownership interest. The equity interests acquired by C3 and issued to CRESO were not considered a discount to debt, as the unconsolidated net assets of LMC were deemed to have an initial value of $0 upon closing of the Transaction for financial accounting purposes. Further, LMC is fully responsible for the repayment of debt obligations.

Midwest Debt

In connection with the Transaction, LMC entered into a Loan Agreement (the “Loan Agreement”), dated July 24, 2007, with Bank Midwest, N.A. (“Midwest”). Following the Transaction, the Loan Agreement has been amended to renew and modify certain terms. The Loan Agreement, as amended on October 6, 2009 (the “Loan Amendment”), provided for total loan availability of $5,025, consisting of a $4,000 term loan and a revolving loan of up to $1,025 based on a percentage of LMC’s eligible receivable and inventory. The Loan Amendment adjusted, among other terms, the interest rate of all outstanding loans to a fixed rate of 9%, certain financial covenants under the Loan Agreement, maturity date of the revolving loan through June 30, 2010 with monthly interest payments, and required an immediate repayment of $325 of the term loan and $325 of the revolving loan. The members of the Liquidmetal Coatings, LLC (the “Members”) were required to contribute $650 in equity to repay the amounts due under the Loan Agreement (the “Capital Call”). On October 6, 2009, the Company paid $450 which represented its portion of the Capital Call and the remaining Members paid $200. As a result of the payment, the monthly amortization payments due under the term loan were reduced to $47 and the maturity date was extended to September 30, 2012. In connection with the Loan Amendment, the Company borrowed $450 from C3 Capital Partners (“C3”) to contribute its share of the Capital Call pursuant to a bridge loan agreement with C3 and subsequently paid down the bridge loan in November 2009.

Additionally, LMC entered into Promissory Notes, dated August 29, 2007 and October 21, 2008 (the “Capital Loan”), with Midwest to provide for $45 and $105 to be used towards the purchase of a company truck and HVOF spray equipment with annual interest rates of 7.43% and 8.25%, respectively. The Capital Loan had maturity dates of September 1, 2012 and November 1, 2013.

On June 25, 2010 LMC entered into a Credit Agreement with Enterprise Bank & Trust and retired all of its loan agreements with Midwest (see “Enterprise Debt” below).

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

As of September 30, 2010 and December 31, 2009, the gross outstanding loan balance under the Midwest term loan totaled $0 and $1,430, respectively, and the gross outstanding loan balance under the Midwest revolving loan totaled $0 and $307, respectively. The loans are presented as long-term debt and short-term debt on the Company’s consolidated balance sheet, respectively. Interest expense incurred under the term loan and revolving loan totaled $0 and $66 for the three and nine months ended September 30, 2010, respectively. Interest expense incurred under the term loan and revolving loan totaled $54 and $177 for the three and nine months ended September 30, 2009, respectively. As of September 30, 2010 and December 31, 2009, the gross outstanding loan balance under the Capital Loan totaled $0 and $102, respectively, which is presented as long-term debt on the Company’s consolidated balance sheet. Interest expense incurred under the Capital Loan totaled $0 and $4 for the three and nine months ended September 30, 2010, respectively. Interest expense incurred under the Capital Loan totaled $2 and $7 for the three and nine months ended September 30, 2009, respectively.

Enterprise Debt

On June 25, 2010, LMC entered into a Credit Agreement (“Credit Agreement”) with Enterprise Bank & Trust (“Enterprise”). The Credit Agreement provides for a total loan availability of $3,700, consisting of $1,500 term loan (“Term Note”), a revolving loan of up to $2,000 (“Revolving Note”), and equipment loans (“Equipment Note”) of up to $200. The Term Note of $1,500 has a maturity date of June 25, 2013 and bears an interest rate of 7% per annum. LMC is required to make monthly payments of principal and interest under the Term Note, with monthly payments of (i) $50 during months 1 through 12, (ii) $42 during months 13 through 24 and (iii) $33 during months 25 through 36. All remaining principal and interest shall be due and payable upon the maturity date

Borrowing availability under the Revolving Note is based on a percentage of LMC’s eligible receivables and inventory and accrues interest at the rate of the greater of libor plus 3.75% or 6%. LMC will make monthly interest payments on the Revolving Note until June 24, 2011, at which point all remaining principal and interests are due. LMC has the right to prepay the Term Note and the Revolving Note and the Equipment Note, in whole or in part, at any time without penalty or premium.

The Credit Agreement is secured by a blanket security interest in all of the LMC’s assets. Pursuant to a subordination agreement between C3 Capital Partners, L.P., C3 Capital Partners II, L.P. (collectively the “C3 Entities”) and Enterprise, Enterprise’s security interest in the assets is senior to the C3 Entities’ security interest in the same assets.

As of September 30, 2010 and December 31, 2009, the gross outstanding loan balance under the Enterprise Term Note totaled $1,400 and $0, respectively, and the gross outstanding loan balance under the Enterprise Revolving Note totaled $415 and $0, respectively. The Term Note and the Revolving Note are presented as long-term debt and short-term debt on the Company’s consolidated balance sheet, respectively.

C3 Debt

In the Transaction, LMC also entered into a Securities Purchase Agreement, dated July 24, 2007 (the “Securities Purchase Agreement”), with C3 Capital Partners, L.P. (“C3”), C3 Capital Partners II, L.P. (“C3 II”, and with C3, the “C3 entities”), and Liquidmetal Coatings Solutions, LLC, a wholly owned subsidiary of LMC that will operate the thermal spray coatings business (“LMCS”). Pursuant to the Securities Purchase Agreement, LMC issued to the C3 entities subordinated promissory notes in the aggregate principal amount of $6,500 (the “Subordinated Notes”). Under the Securities Purchase Agreement, the C3 entities have the right, beginning on the July 24, 2012 (or, if earlier, upon a default by LMC under the Subordinated Notes or Securities Purchase Agreement) to require LMC to purchase the C3 entities’ membership interests in LMC for a purchase price equal to their pro rata portion of the greater of (i) the appraised fair market value of LMC or (ii) six times LMC’s trailing 12-month earnings before interest, taxes, depreciation, and amortization, less funded debt.

The Subordinated Notes have a maturity date of July 20, 2012 with no required principal payments before maturity other than upon specified triggering events, such as a change in control of LMC. Interest accrues at an annual rate of 14%, with 12% interest being payable monthly beginning September 2007 and the remaining 2% interest being payable at maturity. In connection with the Securities Purchase Agreement and the Subordinated Notes, the Company and LMC entered into pledge agreements with the C3 entities in which the Company pledged its membership interest in LMC to secure the obligations under the notes and LMC pledged its membership interests in LMCS to secure its obligations under the notes. LMC and LMCS also granted to C3 a blanket security interest in all of their assets to secure their obligations under the Subordinated Notes.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

The gross outstanding loan balance including accrued interest payable upon maturity of the Subordinated Note totaled $8,450 and $7,613 as of September 30, 2010 and December 31, 2009, respectively. Interest expense incurred under the Subordinated Notes totaled $248 and $718 for the three and nine months ended September 30, 2010, respectively. Interest expense incurred under the Subordinated Notes totaled $203 and $606 for the three and nine months ended September 30, 2009, respectively.

8. Stock Compensation Plan

During the nine months ended September 30, 2010, there were no options granted under the Company’s 2002 Non-employee Director Stock Option Plan which provides for the grant of stock options to non-employee directors. Further, all options granted under this plan had exercise prices that were equal to the fair market value on the date of grant.

During the nine months ended September 30, 2010, under the Company’s 2002 Equity Incentive Plan which provides for the grant of stock options to officers, employees, consultants and directors of the Company its subsidiaries, the Company granted options to purchase 3,080,000 of the Company’s common stock for an average price of $0.12. Further, all options granted under this plan had exercise prices that were equal to the fair market value on the date of grant.

The Company cancelled 81,130 options during the nine months ended September 30, 2010, for terminated employees and options expired.

On August 3, 2010 (the “Grant Date”), the Company granted 6,000,000 shares of restricted Common Stock to Thomas Steipp, the Company’s President and Chief Executive Officer in conjunction with his employment agreement. The restricted shares will vest ratably over a period of five years starting with the first anniversary of the Grant Date, provided that Mr. Steipp is continuously employed by the Company from the Grant Date through the applicable vesting date.

9. Preferred Units of Subsidiary

On February 22, 2008, LMC completed a transaction under which it issued and sold $2,500 in preferred membership units to two minority members of LMC (the “Preferred Units Transaction”). Immediately following the sale of the preferred membership units, the subscription proceeds (after a 1% transaction fee) were distributed to LMC’s common unit members, and as a result of such distribution, the Company received approximately $1,714 in the distribution. The preferred units issued by LMC have an accruing priority return of 14% per year that are priority over any distribution made by LMC and may be redeemed at any time within four years of issuance through cash payment or distribution in excess of the 14% priority return. LMC is required to redeem the preferred units on or before the second anniversary of the issue date and failure to redeem the preferred units at the specified time will result in the preferred unit holders receiving an additional 2% of common membership units (equal to 1,425 of the currently outstanding common units) per quarter until the preferred units are redeemed in full. As of September 30, 2010, an additional 2,767 membership units have been issued to the preferred unit holders.

As of September 30, 2010, LMC has redeemed $236 of its preferred units and distributed $294 in priority return to the preferred unit holders. The total preferred units outstanding are $2,264 as of September 30, 2010.

10. Segment Reporting and Geographic Information

ASC 280, Segment Reporting, requires companies to provide certain information about their operating segments. In April 2002, the Company began classifying operations into two reportable segments: Liquidmetal alloy industrial coatings and bulk Liquidmetal alloys. The Liquidmetal alloy industrial coatings are used primarily as a protective coating for industrial machinery and equipment, such as drill pipe used by the oil drilling industry and boiler tubes used by coal burning power plants. Bulk Liquidmetal alloys include market opportunities to manufacture and sell casing components for electronic devices, medical devices, sporting goods, tooling, prototype sampling, defense applications and metal processing equipment. Primarily, the expenses incurred by the bulk Liquidmetal alloy segment are research and development costs and selling expenses associated with identifying and developing market opportunities. Bulk Liquidmetal alloys products can be distinguished from Liquidmetal alloy coatings in that the bulk Liquidmetal alloy can have significant thickness, up to approximately one inch, which allows for their use in a wider variety of applications other than a thin protective coating applied to machinery and equipment. Revenue and expenses associated with research and development services and product licensing arrangements are included in the bulk Liquidmetal alloy segment. The accounting policies of the reportable segments are the same as those described in Note 3 to the consolidated financial statements included in the Company's Form 10-K filed with the Securities and Exchange Commission on August 20, 2010.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

Summarized financial information concerning the Company’s reportable segments is shown in the following tables:

	Coatings			Bulk Alloy		Segment Totals
Three months ended September 30, 2010
Revenue to external customers	$	1,839		$	15,470	$	17,309
Gross profit		671			15,034		15,705
Total segment (loss) income		(311	)		14,652		14,341
Total identifiable assets at end of period		2,406			6,718		9,124

Three months ended September 30, 2009
Revenue to external customers	$	2,041		$	2,168	$	4,209
Gross profit		693			607		1,300
Total segment (loss) income		(124	)		156		32
Total identifiable assets at end of period		2,534			9,137		11,671

Nine months ended September 30, 2010
Revenue to external customers	$	6,383		$	15,830	$	22,213
Gross profit		2,224			14,613		16,837
Total segment (loss) income		(754	)		13,881		13,127
Total identifiable assets at end of period		2,406			6,718		9,124

Nine months ended September 30, 2009
Revenue to external customers	$	6,234		$	5,086	$	11,320
Gross profit		2,198			2,177		4,375
Total segment (loss) income		(271	)		1,013		742
Total identifiable assets at end of period		2,534			9,137		11,671

Reconciling information between reportable segments and the Company’s consolidated totals is shown in the following table:

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

	For the Three Months						For the Nine Months
	Ended September 30,						Ended September 30,
	2010			2009			2010			2009

Total segment income	$	14,341		$	32		$	13,127		$	742
General and administrative expenses, excluded		(1,755	)		(738	)		(3,132	)		(2,503	)

Consolidated income (loss) before interest, income taxes, and noncontrolling interests	$	12,586		$	(706	)	$	9,995		$	(1,761	)

Loss from extinguishment of debt		-			-			-			(1,471	)
Change in value of warrants, (loss) gain		(27,199	)		2,015			(24,361	)		8,138
Change in value of conversion feature, gain		15			474			444			1,434
Interest expense		(2,142	)		(739	)		(4,022	)		(3,807	)
Income taxes		-			(75	)		-			(120	)
Income attributable to noncontrolling interest		114			39			250			59
Consolidated net loss attributable to Liquidmetal Technologies, Inc.	$	(16,626	)	$	1,008		$	(17,694	)	$	2,472

Excluded general and administrative expenses are attributable to the Company’s corporate headquarters. These expenses primarily include corporate salaries, consulting, professional fees and facility costs. Research and development expenses are included in the operating costs of the segment that performed the research and development.

Revenues from sales to companies in the United States were $16,987 and $1,983 during the three months ended September 30, 2010 and 2009, respectively. The revenue related to the United States of America was earned under defense-related research and development contracts, sales of coatings products, sales of Liquidmetal bulk alloy products and royalties.

During the three months ended September 30, 2010, the Company had revenue from sales to companies outside of the United States of $322. The revenue related to sales to companies outside of the United States was mostly from coating materials. During the three months ended September 30, 2009, the Company had revenues from companies outside of the United States of $2,226 of which $1,404 represented sales to companies located in South Korea. The revenue related to sales to companies outside of the United States was mostly from bulk alloy products.

Long-lived assets include net property, plant, and equipment, and net intangible assets. The Company had long-lived assets of $1,892 and $1,968 located in the United States at September 30, 2010 and December 31, 2009, respectively. The Company had long-lived assets of $4,432 and $4,932 located in South Korea at September 30, 2010 and December 31, 2009, respectively.

Reconciling information between reportable segments and the Company’s consolidated totals is shown in the following table:

	September 30,
	2010

Total segment assets	$	9,124
Cash and cash equivalents		3,028
Prepaid expenses and other current assets		292
Other property, plant and equipment		44
Intangibles, net		-
Other assets		204
Total consolidated assets	$	12,692

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

Assets excluded from segment assets include assets attributable to the Company’s corporate headquarters. The Company’s largest corporate assets consist of intangible assets, which consist primarily of the Company’s patents and trademarks.

11. Income (Loss) Per Common Share

Basic earnings per share (“EPS”) is computed by dividing earnings (loss) attributable to common shareholders by the weighted average number of common shares outstanding for the periods. Diluted EPS reflects the potential dilution of securities that could share in the earnings.

Options to purchase 8,134,126 shares of common stock at prices ranging from $0.09 to $15.00 per share were outstanding at September 30, 2010, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive. Warrants to purchase 47,232,459 shares of common stock with prices ranging from $0.48 to $1.75 per share outstanding at September 30, 2010, were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive. 75,047,614 shares of common stock issuable upon conversion of the Company’s convertible preferred stocks with conversion prices ranging from $0.10 and $0.22 per share outstanding at September 30, 2010 were not included in the computation of diluted EPS for the same period because the inclusion would have been antidilutive. Additionally, 12,905,318 shares of common stocks issuable upon conversion of the Company’s convertible preferred stock dividends with conversion prices ranging from $0.10 and $0.22 per share outstanding at September 30, 2010 were not included in the computation of diluted EPS for the same period because the inclusion would have been antidilutive.

Pursuant to EITF 00-19, "Accounting for Derivative Financial Instruments Indexed to, and Potentially Settled in, a Company's Own Stock", the Company is required to report a value of the warrant as a fair value and record the fluctuation to the fair value of the warrant liability to current operations. The change in the fair value of the warrants resulted in losses of $27,199 and $24,361 for the three and nine months ended September 30, 2010, respectively, and gains of $2,015 and $8,138 for the three and nine months ended September 30, 2009, respectively. The fair value of warrants outstanding at September 30, 2010 of $26,786 was computed using the Black-Scholes model under the following assumptions: (1) expected life of 0.63 to 4.08 years; (2) volatility of 149%, (3) risk free interest of 0.27% to 1.27%, and dividend rate of 0%. The fair value of warrants outstanding at December 31, 2009 of $3,975 was computed using the Black-Scholes model under the following assumptions: (1) expected life of 0.45 to 4.83 years; (2) volatility of 152%, (3) risk free interest of 0.20% to 2.69%, and dividend rate of 0%.

12. Commitments and Contingencies

The Company is from time to time a party to certain legal proceedings arising in the ordinary course of business. Although outcomes cannot be predicted with certainty, the Company does not believe that any legal proceeding to which it is a party will have a material adverse effect on the Company’s financial position, results of operations, and cash flows.

On June 26, 2006, the Company entered into a joint venture agreement with SAGA, SpA in Padova, Italy, (“SAGA”) a specialist precision parts manufacturer. The joint venture is named Liquidmetal SAGA Italy, Srl (“LSI”). The Company also entered into an exclusive manufacturing license agreement for the eyewear industry with LSI. Under the joint venture agreement, the Company has the option to buy ownership interest in LSI, initially, of 19.9% to up to 50%. In December 2006, the Company exercised the 19.9% interest in LSI and in January 2007 and June 2007, the Company contributed additional $217 and $86, respectively, into LSI as additional investment. The contribution did not change the Company’s 19.9% interest in LSI. Under the licensing agreement, at any time following 18 months after the effective date of the agreement, LSI may exercise its option to sell to the Company certain business assets including manufacturing equipment acquired under the joint venture. During the fourth quarter of the year ended December 31, 2009, the Company wrote-off its investment of $306 in the joint venture due to lower than anticipated growth in the eye wear industry. On August 6, 2010, SAGA filed a complaint against the Company claiming damages of $3,200 for payment on an alleged loan and for alleged breach of contract in connection with the formation of LSI. The Company is in the process of responding to the claim and working with SAGA to resolve the matter.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

The Company has outstanding liens on assets by our South Korean subsidiary by various creditors for past-due trade payables totaling $2,175, which are held by creditors in South Korea, as of September 30, 2010. The Company is currently working to resolve the matter with each creditor by seeking a forbearance or compromise. If the Company cannot repay the amounts due or obtain forbearance or compromise, the creditors may seek to foreclose on the Company’s assets located in Korea.

13. Related Party Transactions

During 2009, John Kang, former Chairman of the Company, advanced the Company $250 to fund working capital needs. On August 5, 2010, the Company paid off Mr. Kang $63 which represented the amount outstanding as well as 10% accrued interest as of that date.

On August 1, 2010, the Company entered into an agreement with John Kang, former Chairman of the Company, to provide consulting services to the Company through December 31, 2011 and on a month-to-month basis thereafter. During both the three and nine months ended September 30, 2010, the Company paid $42 for his services.

As of September 30, 2010 and December 31, 2009, Ricardo Salas, the Company’s Director and Executive Vice President, held $0 and $259 of the unsecured subordinated notes, respectively. Mr. Salas advanced the Company $210 and $175 during 2010 and 2009, respectively, to fund the Company’s working capital needs. On August 5, 2010, the Company paid off Mr. Salas $408 which represented the amount outstanding as well as 10% accrued interest as of that date.

In October 2009, Mr. Kang, Mr. Salas and Tony Chung, the Company’s Chief Financial Officer, acquired 80,000 shares of the Company’s Series A-1 Preferred Stock and 2,000,000 warrants for an aggregate cash price of $400. The Series A-1 Preferred Stock are convertible into the Company’s common stock at a conversion price of $0.10 per common share. Further, the warrants are issuable into the Company’s common stock at an exercise price of $0.50 per share and expire on January 3, 2012.

In May 2009, the Company completed a transaction in which (i) the holders of our 8% Convertible Subordinated Notes exchanged such notes for a combination of new January 2011 Notes and shares of a new series of convertible preferred stock designated “Series A-2 Preferred Stock”, together with warrants thereon, and (ii) certain investors purchased, for an aggregate purchase price of $2,500, shares of a new series of convertible preferred stock designated as “Series A-1 Preferred Stock” (see Note 7). The lead investors in this transaction were Carlyle Liquid, LLC and Carlyle Liquid Holdings, LLC (the "Carlyle Entities"), which are two investor entities organized by Abdi Mahamedi and Jack Chitayat, former director of the Company. Mr. Mahamedi became a director and greater-than-5% beneficial owner of the company by reason of the May 2009 transaction, and Mr. Chitayat also became a greater-than-5% beneficial owner of our company by reason of the May 2009 transaction. Mr. Mahamedi and Mr. Chitayat have shared voting and investment control over the shares held by the Carlyle Entities due to the fact that other entities owned by them are the managing members of these two Carlyle entities. Additionally, Mr. Iraj Azarm and Mr. Robert Biehl, directors of the Company, are passive investors in the Carlyle Entities.

During the nine months ended September 30, 2010, Mr. Mahamedi and Carlyle Liquid Holdings, LLC advanced the Company $30 and $75, respectively, to fund the Company’s working capital needs. On August 5, 2010, the Company paid off $31 and $78 to Mr. Mahamedi and Carlyle Liquid Holdings, LLC, respectively, representing the amounts outstanding and 10% accrued interest as of that date.

The Company has an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation headed by Mr. Chitayat. Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets. The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The Company recognized revenues from product sales and licensing fees of $0 from LLPG during both the three and nine months ended September 30, 2010. The Company recognized revenues from product sales and licensing fees of $0 and $203 from LLPG during the three and nine months ended September 30, 2009, respectively. There are no accounts receivable from LLPG outstanding as of September 30, 2010 and December 31, 2009. On August 6, 2010, the Company paid $360 to LLPG as a fee related to a modification of its existing exclusive license agreement in connection with the Apple licensing agreement.

LIQUIDMETAL TECHNOLOGIES AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2010 and 2009

(in thousands, except share data)

(unaudited)

On June 1, 2007, the Company entered into a transaction with Grace Metal (currently Liquidmetal Korea Co., Ltd. “LMK”), under which (i) LMK agreed to purchase various equipments (including die casting machines and vacuum induction melters) used in the Company’s bulk amorphous alloy business segment and (ii) the Company granted LMK a 10-year exclusive license to manufacture products made from bulk Liquidmetal alloys for customers whose principal headquarters or whose major operations are located in South Korea. LMK was formed by an investor group that includes the former director and officer of the Company, James Kang, who is also the brother of John Kang, former Chairman of the company.

In consideration of the license agreement with LMK, the Company was entitled to royalty of 10% of LMK’s net sales of licensed products (unless LMK’s margin on the products falls below specified levels, in which case a new royalty will be negotiated in good faith). Effective June 1, 2008, the royalty rate was adjusted to 5%. On June 15, 2010, the licensing agreement with LMK was terminated.

The Company purchased production supplies and outsourced production of certain bulk alloy production with LMK. In June 2008, the Company began sharing the use of its manufacturing facility and production equipment in Pyongtaek, South Korea, with LMK as the Company began significant outsourcing of its bulk alloy parts production. The Company incurred $0 in expenses for purchase of production supplies and outsourcing fees during both the three and nine months ended September 30, 2010. The Company incurred expenses for purchase of production supplies and outsourcing fees of $698 and $1,135 during both the three and nine months ended September 30, 2009, respectively. There are $0 included in accounts payable and accrued expenses for both September 30, 2010 and December 31, 2009 for outstanding trade payables due to LMK. The Company recognized $0 revenue from sales of raw materials and royalties during both the three and nine months ended September 30, 2010. The Company recognized $1,652 and $3,775 revenue from sales of raw materials and royalties during the three and nine months ended September 30, 2009, respectively. There are $0 included in net accounts receivables as of both September 30, 2010 and December 31, 2009, for outstanding trade receivables due from LMK.

14. Subsequent Event

On November 3, 2010, the Company filed an Amended and Restated Certificate of Designations, Preferences, and Rights (the "Amended Designation") for the Company's Series A Preferred Stock (the "Series A Preferred Stock"). The Amended Designation was approved by the requisite vote of the holders of the Company's Series A Preferred Stock and was filed with the Delaware Secretary of State in accordance with a Consent Agreement entered into between the Company and the holders of 2/3 of the Series A Preferred Stock (the "Consent Agreement"). The Amended Designation amends the terms of the Series A Preferred Stock by (i) providing that dividends ceased accruing thereon as of June 1, 2010, (ii) the liquidation preference and corresponding conversion value on the Series A Preferred Stock was increased from 1.0 to 1.08 of the sum of the issue price and accrued but unpaid dividends, (iii) the Series A Preferred Stock is now mandatorily convertible at any time at the option of the Company without condition, and (iv) the Series A Preferred Stock will no longer have any price-based anti-dilution rights. The Consent Agreement provided that, in exchange for voting in favor of the Amended Designation, the warrants held by the holders signing the Consent Agreement (to the extent such warrants were issued in connection with the original issuance of the Series A Preferred Stock) will be extended to an expiration date of July 2015 and the price-based anti-dilution rights on such warrants are removed.

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

This management’s discussion and analysis should be read in conjunction with the condensed consolidated financial statements and notes included elsewhere in this report on Form 10-Q.

This management’s discussion and analysis, as well as other sections of this report on Form 10-Q, may contain “forward-looking statements” that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believe,” “estimate,” “ project,” “expect,” “intend,” “may,” “anticipate,” “plan,” “seek,” and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the heading “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the fiscal year ended December 31, 2009 and other risks and uncertainties discussed in other filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, Form 10-K, Form 8-K, and other filings). Liquidmetal Technologies disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

Overview

We are a materials technology company that develops and commercializes products made from amorphous alloys. Our Liquidmetal® family of alloys consists of a variety of coatings, powders, bulk alloys, and composites that utilize the advantages offered by amorphous alloy technology. We develop, manufacture, and sell products and components from bulk amorphous alloys that are incorporated into the finished goods of our customers, and we also market and sell amorphous alloy industrial coatings. We also partner with third-party licensees and distributors to develop and commercialize Liquidmetal alloy products. We have the exclusive right to develop, manufacture, and sell what we believe are the only commercially viable bulk amorphous alloys.

Amorphous alloys are unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structure that forms in ordinary metals and alloys when they solidify. Liquidmetal alloys possess a combination of performance, processing, and cost advantages that we believe makes them preferable to other materials in a variety of applications. The amorphous atomic structure of our alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, our zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys, such as Ti-6Al-4V, but they have processing characteristics similar in many respects to plastics. We believe these advantages could result in Liquidmetal alloys supplanting other incumbent materials in a wide variety of applications. Moreover, we believe these advantages will enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

Our revenues are derived from two principal operating segments: Liquidmetal alloy industrial coatings and bulk Liquidmetal alloy products. Liquidmetal alloy industrial coatings are used primarily as a protective coating for industrial machinery and equipment, such as drill pipe used by the oil drilling industry and boiler tubes used in coal-burning power plants. Bulk Liquidmetal alloy segment revenue includes sales of parts or components of electronic devices, medical products, and sports and leisure goods, tooling and prototype parts (including demonstration parts and test samples) for customers with products in development, product licensing and arrangements, and research and development revenue relating primarily to defense and medical applications. We expect that these sources of revenue will continue to significantly change the character of our revenue mix.

The cost of sales for our Liquidmetal coatings segment consists primarily of the costs of outsourcing our manufacturing to third parties. Consistent with our expectations, our cost of sales has been increasing over historical results as we further build our bulk Liquidmetal alloy business. Although we plan to continue outsourcing the manufacturing of our coatings, we will internally manufacture many products derived from our bulk Liquidmetal alloys.

Selling, general, and administrative expenses currently consist primarily of salaries and related benefits, stock-based compensation, travel, consulting and professional fees, depreciation and amortization, insurance, office and administrative expenses, and other expenses related to our operations.

Research and development expenses represent salaries, related benefits expense, depreciation of research equipment, consulting and contract services, expenses incurred for the design and testing of new processing methods, expenses for the development of sample and prototype products, and other expenses related to the research and development of Liquidmetal alloys. Costs associated with research and development activities are expensed as incurred. We plan to enhance our competitive position by improving our existing technologies and developing advances in amorphous alloy technologies. We believe that our research and development efforts will focus on the discovery of new alloy compositions, the development of improved processing technology, and the identification of new applications for our alloys.

On July 24, 2007, we transferred substantially all of the assets of our Liquidmetal alloy industrial coatings business to a newly formed, newly capitalized subsidiary named Liquidmetal Coatings, LLC, a Delaware limited liability company (“LMC”), and LMC assumed substantially all of the liabilities of the coatings business. The transfer included the thermal spray coatings assets and liabilities acquired under a purchase agreement with Foster Wheeler Energy Services in June 2007. We initially held a 69.25% ownership interest in LMC, however, during 2010, LMC failed to redeem its preferred units by the specified time and was required to issue additional shares to its noteholders. As a result, our ownership interest in LMC decreased to 66.56%. The results of operation of LMC are consolidated and comprise our Liquidmetal alloy industrial coatings segment for financial reporting purposes.

In May 2010, LMC entered into a joint venture agreement with IMCO Alloys Private Limited (“IMCO”) to create a subsidiary named Liquidmetal Coatings Solutions India Private Limited (“LMCSI”) and engage in application services of Liquidmetal products as a protective coating. Initially, under the joint venture agreement, LMC held 80% and IMCO held 20% of the outstanding Class A Shares of LMCSI. LMC may, at its option, subscribe to Class B Shares of LMCSI. In September 2010, LMC provided to LMCSI approximately $0.1 million in capital equipment and was issued 358,204 shares of Class B Shares of LMCSI. As of September 30, 2010, LMC holds an 88.60% ownership interest in LMCSI.

The following discussion and analysis of our financial condition and results of operations focuses on the historical results of our continuing operations.

Critical Accounting Policies and Estimates

The preparation of condensed consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates and assumptions are based on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results could differ materially from these estimates under different assumptions or conditions.

We believe that the following accounting policies are the most critical to our condensed consolidated financial statements since these policies require significant judgment or involve complex estimates that are important to the portrayal of our financial condition and operating results:

Exchange rate fluctuations

Warranty accrual

Allowance for doubtful accounts

Inventories at lower of cost or net realizable value

Deferred tax assets

Valuation of derivatives of warrants and embedded conversion features

Our Annual Report on Form 10-K for the year ended December 31, 2009, contains further discussions on our critical accounting policies and estimates.

Results of Operations

Comparison of the three months ended September 30, 2010 and 2009

Revenue. Revenue increased by $13.1 million to $17.3 million for the three months ended September 30, 2010 from $4.2 million for the three months ended September 30, 2009. The increase consisted of a $13.3 million increase in revenue from the licensing and manufacturing of bulk Liquidmetal alloys, which was offset by a decrease of $0.2 million from sales of our coating products.

Cost of Sales. Cost of sales decreased to $1.6 million, or 9% of revenue, for the three months ended September 30, 2010 from $2.9 million, or 69% of revenue, for the three months ended September 30, 2009. The decrease was a result of a continued change in revenue mix, primarily from licensing revenue, during the three months ended September 30, 2010. The cost to manufacture parts from our bulk Liquidmetal alloys is variable and differs based on the unique design of each product. However, the cost of sales for the products sold by the coatings business segment is generally consistent because the Liquidmetal coatings products are produced by third parties and sold wholesale to various industries.

Selling, General, and Administrative Expenses. Selling, general, and administrative expenses increased to $2.4 million, or 14% of revenue, for the three months ended September 30, 2010 from $1.3 million, or 32% of revenue, for the three months ended September 30, 2009. The increase was primarily a result of increases in legal and director fees of $0.7 million and an increase in other expense due to the LLPG license agreement modification fee of $0.4 million.

Research and Development Expenses. Research and development expenses were $0.3 million, or 2% of revenue, for the three months ended September 30, 2010 and $0.3 million, or 8% of revenue, for the three months ended September 30, 2009. We continue to perform research and development of new Liquidmetal alloys and related processing capabilities, develop new manufacturing techniques, and contract with consultants to advance the development of Liquidmetal alloys.

Change in Value of Warrants. Change in value of warrants decreased to a loss of $27.2 million, or 157% of revenue, for the three months ended September 30, 2010 from a gain of $2.1 million, or 48% of revenue, for the three months ended September 30, 2009. The change in value of warrants, consisting of warrants issued from convertible and subordinated notes and convertible preferred stock issued between 2004 and 2009, was a significant loss for the three months ended September 30, 2010 primarily due to significant increases in our stock price since June 30, 2010.

Change in Value of Conversion Feature. Change in the value of conversion feature liability from our convertible notes resulted in a gain of $15 thousand, or 0.09% of revenue, during the three months ended September 30, 2010 from a gain of $0.5 million, or 11% of revenue, for the three months ended September 30, 2009, due to the retirement of our convertible notes.

Other Income. Other income was $18 thousand for the three months ended September 30, 2010 which consisted of a write-off of accounts payable. There was no other income for the three months ended September 30, 2009.

Interest Expense. Interest expense was $2.5 million, or 14% of revenue, for the three months ended September 30, 2010 and was $1.1 million, or 25% of revenue, for the three months ended September 30, 2009. Interest expense consists primarily of debt discount amortization and interest accrued on outstanding convertible and subordinated notes, borrowings under a factoring, loan, and security agreement, a revolving loan agreement, and the Kookmin loan. The increase was primarily due to increase in debt discount amortization expense in conjunction with the retirement of our senior convertible notes.

Comparison of the nine months ended September 30, 2010 and 2009

Revenue. Revenue increased by $10.9 million to $22.2 million for the nine months ended September 30, 2010 from $11.3 million for the nine months ended September 30, 2009. The increase was primarily due to an increase in revenue from the licensing and manufacturing of bulk Liquidmetal alloys.

Cost of Sales. Cost of sales decreased to $5.4 million, or 24% of revenue, for the nine months ended September 30, 2010 from $6.9 million, or 61% of revenue, for the nine months ended September 30, 2009. The decrease was a result of a continued change in revenue mix, primarily from licensing revenue, during the nine months ended September 30, 2010. The cost to manufacture parts from our bulk Liquidmetal alloys is variable and differs based on the unique design of each product. However, the cost of sales for the products sold by the coatings business segment is generally consistent because the Liquidmetal coatings products are produced by third parties and sold wholesale to various industries.

Selling, General, and Administrative Expenses. Selling, general, and administrative expenses increased to $5.1 million, or 23% of revenue, for the nine months ended September 30, 2010 from $4.3 million, or 38% of revenue, for the nine months ended September 30, 2009. The increase was primarily a result of increases in director’s fees of $0.4 million and increases in other expense due to the LLPG license agreement modification fee of $0.4 million.

Research and Development Expenses. Research and development expenses were $0.8 million, or 4% of revenue, for the nine months ended September 30, 2010 and $0.9 million, or 8% of revenue for the nine months ended September 30, 2009. The decrease was primarily a result of a decrease in patent and trademark expenses although we continue to perform research and development of new Liquidmetal alloys and related processing capabilities, develop new manufacturing techniques, and contract with consultants to advance the development of Liquidmetal alloys.

Loss from Extinguishment of Debt. Loss from extinguishment of debt decreased to $0 for the nine months ended September 30, 2010 from $1.5 million, or 13% of revenue, for the nine months ended September 30, 2009. The $1.5 million loss was recognized from extinguishment of certain of our convertible and subordinated notes during 2009.

Change in Value of Warrants. Change in value of warrants decreased to a loss of $24.4 million, or 110% of revenue, for the nine months ended September 30, 2010 from a gain of $8.1 million, or 72% of revenue, for the nine months ended September 30, 2009. The change in value of warrants, consisting of warrants issued from convertible and subordinated notes and convertible preferred stock issued between 2004 and 2009, was a significant loss for the nine months ended September 30, 2010 primarily due to significant increases in our stock price since June 30, 2010.

Change in Value of Conversion Feature. Change in the value of conversion feature liability from our convertible notes resulted in a gain of $0.4 million, or 2% of revenue, during the nine months ended September 30, 2010 from a gain of $1.4 million, or 12% of revenue, for the nine months ended September 30, 2009, primarily as a result of fluctuations in our stock price and the retirement of our convertible notes.

Other Income. Other income was $0.1 million, for the nine months ended September 30, 2010, which consisted of a write-off of accounts payable. There was no other income for the nine months ended September 30, 2009.

Interest Expense. Interest expense was $5.1 million, or 23% of revenue, for the nine months ended September 30, 2010 and was $4.8 million, or 42% of revenue, for the nine months ended September 30, 2009. Interest expense consists primarily of debt discount amortization and interest accrued on outstanding convertible and subordinated notes, borrowings under a factoring, loan, and security agreement, and a revolving loan agreement. The increase was primarily due to increase in debt discount amortization expense in conjunction with the retirement of our senior convertible notes.

Liquidity and Capital Resources

Our cash provided by operating activities was $8.7 million for the nine months ended September 30, 2010. Our working capital deficit increased from $13.1 million at December 31, 2009 to $27.8 million at September 30, 2010. The working capital deficit increase of $14.7 million was attributable to an increase in warrant liabilities of $22.8 million offset by an increase in cash and cash equivalents of $3.0 million, an increase of prepaid expenses and other current assets of $0.1 million, a decrease in accounts payable and accrued expenses of $2.7 million, a decrease in short-term debt of $0.5 million, a decrease in long-term debt, current portion of $1.4 million and a decrease in conversion feature liabilities of $0.4 million.

Our cash used in investing activities was $0.2 million for the nine months ended September 30, 2010 for the acquisition of property and equipment and investments in patents and trademarks.

Our cash used by financing activities was $4.6 million for the nine months ended September 30, 2010. We paid net $17.3 million in borrowings mainly for our convertible subordinated notes, our subordinated promissory note, our bridge note, a factoring, load and security agreement, and related party advances, which were offset by $9.6 million in borrowings mainly from an additional term loan as payment for monthly accrued interest due, short term borrowings, and a promissory note, $2.0 million in subscriptions for our common stock and $1.0 million of warrants exercised.

On May 1, 2009, we completed a financing transaction (the “Transaction”) whereby aggregate cash of $2.5 million and principal and accrued interest of $20.6 million due under the previously issued 8% Convertible Subordinated Notes due January 2010 (the “Prior Notes”) were exchanged for 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share, 2,625,002 shares of Series A-2 Preferred Stock with an original issue price of $5.00 per share, and $7.5 million of new 8% Senior Secured Convertible Subordinated Notes due January 3, 2011 (the “January 2011 Notes”). The Transaction was consummated pursuant to a Securities Purchase and Exchange Agreement, dated May 1, 2009 among the exchanging note holders and investors.

Our Series A-1 and Series A-2 Preferred Stock accrue cumulative dividends at an annual rate of 8%, which is payable semi-annually. Beginning on the second anniversary of the initial issuance of shares of our Series A-1 and Series A-2 Preferred Stock, the dividend will increase to 10%. As of September 30, 2010, we have accrued dividends of $1.1 million included in accounts payable and other accrued expenses. The dividends are payable in cash or in kind by the issuance by the company of additional preferred stock, only when and as declared by our Board of Directors. On August 5, 2010, we repaid in full all principal and interest on the January 2011 Notes in the amount of $8.2 million and all security interests on our assets securing such obligations were released and terminated.

The Series A-1 Preferred Stock, Series A-2 Preferred Stock, and January 2011 Notes are convertible into the company’s common stock at conversion price of $0.10, $0.22, and $0.60 per common share, respectively. We issued warrants to purchase 3,125,007 shares and 42,329,407 shares of our company’s common stock at an exercise of $0.60 and $0.50 per share to the buyers of the January 2011 Notes and the buyers of shares of our Series A-1 and Series A-2 Preferred Stock, respectively. The warrants will expire in January 2012. The conversion prices and the number of shares of common stock issuable under the Series A-1 and Series A-2 Preferred Stock, the January 2011 Notes and the warrants are subject to adjustments for anti-dilution purposes.

On November 3, 2010, we filed an Amended and Restated Certificate of Designations, Preferences, and Rights (the "Amended Designation") for our Series A Preferred Stock (the "Series A Preferred Stock"). The Amended Designation was approved by the requisite vote of the holders of our Series A Preferred Stock and was filed with the Delaware Secretary of State in accordance with a Consent Agreement entered into between us and the holders of 2/3 of the Series A Preferred Stock (the "Consent Agreement"). The Amended Designation amends the terms of the Series A Preferred Stock by (i) providing that dividends ceased accruing thereon as of June 1, 2010, (ii) the liquidation preference and corresponding conversion value on the Series A Preferred Stock was increased from 1.0 to 1.08 of the sum of the issue price and accrued but unpaid dividends, (iii) the Series A Preferred Stock is now mandatorily convertible at any time at our option without condition, and (iv) the Series A Preferred Stock will no longer have any price-based anti-dilution rights. The Consent Agreement provided that, in exchange for voting in favor of the Amended Designation, the warrants held by the holders signing the Consent Agreement (to the extent such warrants were issued in connection with the original issuance of the Series A Preferred Stock) will be extended to an expiration date of July 2015 and the price-based anti-dilution rights on such warrants are removed.

On May 28, 2010, we issued $2.0 million of 13% Subordinated Promissory Note (“the January 2011 Subordinated Note”) due on the earlier date of January 3, 2011 or the date on which all outstanding amounts are due under the Company’s 8% January 2011 Notes. On August 5, 2010, we repaid in full all principal and interest on the January 2011 Subordinated Notes in the amount of $2.0 million. In connection with the repayment, on August 10, 2010, we entered into a Subscription Agreement pursuant to which the Company issued 7,870,307 shares of the Company’s common stock to the noteholder for an aggregate price of $2.0 million.

On August 5, 2010, we entered into a licensing agreement with Apple Inc. (“Apple”) pursuant to which (i) we contributed substantially all of our intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products in exchange for a license fee, and (iii) CIP granted back to us a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Upon closing of the foregoing transaction, we were paid a portion of the license fee which was used to pay off noteholders and fund operations. 90 days after the closing date and upon completion of certain support milestones, we shall be paid the remaining portion of the license fee.

As of September 30, 2010, we have outstanding liens on assets of our South Korean subsidiary by various creditors in South Korea for past-due trade payables totaling $2.2 million. We are currently working to resolve the matter with each creditor by seeking a forbearance or compromise. If we cannot repay the amounts due or obtain a forbearance or compromise, the creditors may seek to foreclose on our assets located in Korea.

Off Balance Sheet Arrangements

An off-balance sheet arrangement is any transaction, agreement or other contractual arrangement involving an unconsolidated entity under which a company has (1) made guarantees, (2) retained a contingent interest in transferred assets, (3) an obligation under derivative instruments classified as equity, or (4) any obligation arising out of a material variable interest in an unconsolidated entity that provides financing, liquidity, market risk or credit risk support to the company, or that engages in leasing, hedging, or research and development arrangements with the company.

On June 26, 2006, we entered into a joint venture agreement with SAGA, SpA in Padova, Italy (“SAGA”) a specialist precision parts manufacturer. The joint venture is named Liquidmetal SAGA Italy, Srl (“LSI”). We also entered into an exclusive manufacturing license agreement for the eyewear industry with LSI. Under the joint venture agreement, we have the option to buy an ownership interest in LSI, initially, of 19.9% to up to 50%. In December 2006, we exercised our right to acquire a 19.9% ownership interest in LSI and in January 2007 and June 2007 and contributed an additional $0.2 million and $0.1 million, respectively, into LSI as additional investment. The contribution did not change our 19.9% interest in LSI. Under the licensing agreement, at any time following 18 months after the effective date of the agreement, LSI may exercise its option to sell to us certain business assets including manufacturing equipment acquired under the joint venture. During the fourth quarter of the year ended December 31, 2009, we wrote-off its investment of $0.3 million in the joint venture due to lower than anticipated growth in the eye wear industry. On August 6, 2010, SAGA filed a complaint against us claiming damages of $3.2 million for payment on an alleged loan and for alleged breach of contract in connection with the formation of LSI. We are in the process of responding to the claim and working with SAGA to resolve the matter.

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

Not required.

Item 4 – Controls and Procedures

Evaluation of Disclosure Controls and Procedures. Based on an evaluation of the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) as of September 30, 2010, the end of the period covered by this report, our Chief Executive Officer (principal executive officer) and Chief Financial Officer (principal financial officer) have concluded that our disclosure controls and procedures were effective.

Changes in Internal Control. During the quarter ended September 30, 2010, there was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

PART II

OTHER INFORMATION

Item 1 – Legal Proceedings

On August 6, 2010, SAGA, SpA in Padova, Italy (“SAGA”) filed a complaint against us in the County of Orange in California claiming damages of $3.2 million for payment on an alleged loan and for alleged breach of contract in connection with the formation of LSI, a joint venture between us and SAGA. We are in the process of responding to the claim and working with SAGA to resolve the matter.

There are no other material legal proceedings that are pending.

Item 1A – Risk Factors

None.

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

None

Item 3 – Defaults Upon Senior Securities

None

Item 4 – Removed and Reserved

Item 5 – Other Information

None.

Item 6 – Exhibits

The following documents are filed as an exhibit to this Report:

Exhibit
Number		Description of Document

3.1		Amended and Restated Certificate of Designations, Preferences and Right, dated November 2, 2010, between Liquidmetal Technologies, Inc. and holders of the Series A-1 Preferred Stock and holders of the Series A-2 Preferred Stock.

10.1		Employment Agreement, dated August 3, 2010, between Thomas Steipp and Liquidmetal Technologies, Inc.

10.2		Restricted Stock Agreement, dated August 3, 2010, between Thomas Steipp and Liquidmetal Technologies, Inc.

10.3*		Master Transaction Agreement, dated August 5, 2010, between Apple Inc., Liquidmetal Technologies, Inc., Liquidmetal Coatings, LLC and Crucible Intellectual Property, LLC.

10.4		Subscription Agreement, dated August 10, 210, between Liquidmetal Technologies, Inc. and Norden LLC.

10.5		Consent Agreement between Liquidmetal Technologies, Inc. and holders of the Series A-1 Preferred Stock and holders of the Series A-2 Preferred Stock.

31.1		Certification of Principal Executive Officer, Thomas Steipp, as required by Section 302 of the Sarbanes-Oxley Act of 2002

31.2		Certification of Principal Financial Officer, Tony Chung, as required by Section 302 of the Sarbanes-Oxley Act of 2002

32.1		Certification of Principal Executive Officer, Thomas Steipp, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

32.2		Certification of Principal Financial Officer, Tony Chung, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

*		Portions of this exhibit have been omitted pursuant to a confidential treatment request. Omitted information has been filed separately with the Securities and Exchange Commission

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

	LIQUIDMETAL TECHNOLOGIES, INC.
	(Registrant)

Date: November 4, 2010	/s/ Thomas Steipp
	Thomas Steipp
	President and Chief Executive Officer
	(Principal Executive Officer)


Date: November 4, 2010	/s/ Tony Chung
	Tony Chung
	Chief Financial Officer
	(Principal Financial and Accounting Officer)

Attached files

Stock widget

Investing forum

LIQUIDMETAL TECHNOLOGIES INC Reports

Also read