UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

(Mark One)

 

 

For the fiscal year ended December 31, 2020

OR

 

 

Commission File Number 001-39135

 

SiTime Corporation

(Exact name of Registrant as specified in its Charter)

 

 

 

Registrant’s telephone number, including area code: (408) 328-4400

 

Securities registered pursuant to Section 12(b) of the Act:

 

 

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.  Yes ☐ No ☒

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ☒ No ☐

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files).  Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☒

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  YES ☐ NO ☒

The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant based on the last reported sale of the common stock on June 30, 2020, on the Nasdaq Global Market, was $431,489,077 based on the closing price of the registrant’s common stock on such date of $47.41 per share.

The number of shares of Registrant’s Common Stock outstanding as of February 10, 2021 was 17,150,278.

DOCUMENTS INCORPORATED BY REFERENCE

Part III incorporates by reference certain information from the registrant’s definitive proxy statement for the 2021 Annual Meeting of Stockholders to be filed no later than 120 days after the conclusion of the registrant’s fiscal year ended December 31, 2020.

 

 

 

 

---

 

 

Table of Contents

 

 

 

 

i

---

 

 

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

The information in this Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which are subject to the “safe harbor” created by those sections. We may, in some cases, use words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “objective,” “plan,” “potential,” “predict,” “project,” “should,” “will,” “would,” or the negative of those terms, and similar expressions that convey uncertainty of future events or outcomes to identify these forward-looking statements. Any statements contained herein that are not statements of historical facts may be deemed to be forward-looking statements. Forward-looking statements in this report include, but are not limited to, statements about:

1

---

 

These forward-looking statements reflect our management’s beliefs and views with respect to future events and are based on estimates and assumptions as of the date of this report and are subject to risks and uncertainties. We discuss many of these risks in greater detail in the “Risk Factor Summary” below and under Item 1. “Risk Factors.” Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. Given these uncertainties, you should not place undue reliance on these forward-looking statements. We qualify all of the forward-looking statements in this report by these cautionary statements.

You should not rely upon forward-looking statements as predictions of future events. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee that the future results, levels of activity, performance, or events and circumstances reflected in the forward-looking statements will be achieved or occur. Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements. We undertake no obligation to update publicly any forward-looking statements for any reason after the date of this report to conform these statements to actual results or to changes in our expectations, except as required by law.

In addition, statements that “we believe” and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based upon information available to us as of the date of this Annual Report on Form 10-K, and while we believe such information forms a reasonable basis for such statements, such information may be limited or incomplete, and our statements should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all potentially available relevant information. These statements are inherently uncertain and investors are cautioned not to unduly rely upon these statements.

Risk Factors Summary

Our business is subject to numerous risks, as more fully described in “Risk Factors” below. You should read these risks before you invest in our common stock. We may be unable, for many reasons, including those that are beyond our control, to implement or execute our business strategy. In particular, risks associated with our business include, among others:

 

2

---

 

.

3

---

 

PART I

Item 1.Business

Overview

We are a leading provider of silicon timing solutions. Our timing solutions are the heartbeat of our customers’ electronic systems, solve complex timing problems and enable industry-leading products. We provide solutions that are differentiated by high performance and reliability, programmability, small size, and low power consumption. Our products have been designed into over 250 applications across our target markets, including communications and enterprise, automotive, industrial, aerospace, and mobile, Internet of Thing (“IoT”), and consumer. Our current solutions include various types of oscillators, as well as resonators and clock integrated circuits (“ICs”). Our all-silicon solutions are based on three fundamental areas of expertise: micro-electro-mechanical systems (“MEMS”), analog mixed-signal design capabilities, and advanced system-level integration expertise. This expertise allows us to design MEMS resonators, analog circuits, as well as systems and packaging, and put these all together to deliver a system level solution that solves customers’ complex timing problems. In this aspect, we are different than quartz-based providers, who typically have expertise in designing and manufacturing resonators, but typically outsource the analog and packaging. We are also different in that our MEMS resonators are made with silicon, while the quartz suppliers use quartz crystal technology. Our timing solutions are designed to be resilient to environmental stresses. For the communications and enterprise market, our timing solutions provide high performance and resilience in dense, less-controlled environments that experience harsh conditions–an advantage as equipment moves closer to the customer with the rollout of 5G. For the automotive market, our solutions can be utilized in automotive electronics, as well as advanced driver assistance systems (“ADAS”) for self-driving cars, which require increased timing accuracy.  For the industrial market, our products offer high reliability for the diverse operating conditions of industrial equipment, including high temperatures, rapidly changing temperatures, mechanical shock and vibration. For the aerospace market, our solutions provide lower acceleration sensitivity for end products that operate in rugged conditions. For the mobile, IoT and consumer market, our silicon-based timing solutions have the advantage of offering high performance at optimal power consumption and size, as our customers fit more functionality into smaller devices.

Industry Background

Timing Solutions Enable Innovation and are Rapidly Evolving

The ability to accurately measure and reference time has been essential to many of humankind’s greatest inventions and technological progress. Timing technology has continued to evolve over centuries, forming a critical aspect of broader technological advancement. Timing is the heartbeat of every digital electronic system, ensuring that the system runs smoothly and reliably by providing and distributing clock signals to various critical components such as CPUs, communication and interface chips, and radio frequency components. As electronics are expected to operate at higher performance levels in increasingly challenging environments, while also being more complex and footprint-constrained, we believe they will require more sophisticated timing solutions. For example, as 5G communications networks evolve, we expect that they will require higher precision from a greater number of oscillators and timing devices.

Key Building Blocks of Timing Solutions

Timing solutions comprise three key building blocks: resonators, oscillators, and clock ICs. While simpler systems generally require only an external resonator coupled with a basic embedded oscillator circuit, more complex systems require advanced timing solutions that may integrate a variety of resonators, oscillators, and clock ICs in a single chip package. The complexity of these timing solutions increases significantly when the performance requirements of the systems that use them increase, such as electronic systems required to support the 5G communication network infrastructure.

4

---

 

The key building blocks of SiTime’s timing solutions are:

These three building blocks may be used individually or in combination, depending on the end product’s performance, price, and size requirements.

Limitations of Legacy Quartz-based Solutions

For the past 70 years, quartz crystal has been the predominant technology of choice for resonators and will continue to play a role in the timing market. In a quartz oscillator, a quartz crystal resonator is paired with a silicon-based clock IC in a ceramic package. However, quartz timing devices, largely unchanged in decades, have many inherent limitations, including limited frequency ranges, sensitivity to rapid temperature changes, vibration and mechanical shock, susceptibility to frequency jumps at particular temperatures, and limited programmability. Quartz devices must be housed in ceramic packaging, and thus are difficult to integrate into standard semiconductor packages. Quartz products require dedicated manufacturing facilities and have relatively long lead times due to the need to specify various characteristics well in advance of production, without the ability to reconfigure them during the design cycle. In addition, as electronic systems become more complex, feature-rich, and robust, they require more sophisticated timing systems that can seamlessly integrate a variety of resonators, oscillators, and clock ICs in various system-level combinations. This seamless integration is more difficult with legacy quartz systems.

Silicon Timing Solutions Poised to Disrupt the Market

In recent years, advances in silicon-based manufacturing and packaging techniques have allowed the development of alternatives to quartz crystal technology. We believe that silicon MEMS is an ideal technology for resonator design. Specifically, its ability to integrate with other circuits in standard semiconductor packages has made scalable standard silicon manufacturing possible for resonators and broader timing technology. MEMS and silicon-based technologies can operate in a wide range of frequencies, are more resistant to vibration, mechanical shock, and temperature changes, and are less susceptible to frequency jumps. These technologies are also inherently well-suited to produce timing solutions that are small, and offer high performance, robustness and programmability. Timing solutions based on these technologies are manufactured using semiconductor processes in fabrication plants with high capacity, allowing for cost-effective high-volume manufacturing.

Significant Market Opportunity for Timing Solutions

According to Dedalus Consulting - 2019 Frequency Control Components Global Markets, End-Users, Applications & Competitors: Analysis & Forecasts and our estimates, the global timing market was over $7.7 billion as of 2018 and is expected to grow to $10.1 billion by 2024. Dedalus Consulting estimates that oscillators and standalone resonators represented approximately $3.8 billion and $2.9 billion total addressable markets, respectively, as of 2018. Based on our internal estimates, we believe clock ICs represent an approximate $1.0 billion total addressable market. As a subset of the broader timing market, the market for MEMS oscillators is projected to grow from $0.1 billion in 2018 to $0.6 billion by 2024, representing a CAGR of 35.2%, according to Yole Développement’s report “Status of MEMS Industry 2019.”

5

---

 

The Opportunity for Advanced Solutions

From high-performance network infrastructure equipment to low-power battery-operated devices, precise timing solutions enable virtually all electronics. The complexity of such timing solutions increases significantly with the performance requirements of the systems in which they are used. Below are some examples of end markets in which we believe our silicon-based timing is enabling or has the potential to enable, greater functionality than legacy solutions:

Telecommunications, Enterprise, and Cloud Infrastructure

Communications infrastructure equipment used in wireless base stations, wired infrastructure equipment, enterprise networks, and cloud data centers must provide high performance and stability in demanding environments, which may include temperature fluctuations, mechanical shocks, and vibration. If the timing solution within the equipment fails, networks can shut down, leading to service disruptions and higher operating costs. According to Gartner, “Recent reports on 5G pilots and testing have identified a wide range of projected data throughput speeds ranging from 10 times up to 1,000 times faster than 4G. Other reports estimate ranges of one to 10 gigabytes per second.”

Industrial

Industrial equipment, ranging from factory machinery to medical devices, is often exposed to environments characterized by temperature fluctuation, mechanical shocks, vibration, and electromagnetic interference. We believe silicon-based timing solutions can perform better than legacy quartz-based solutions in demanding industrial environments at comparable cost and with lower power consumption and higher reliability.

Automotive

For automotive applications, timing technology must perform reliably over the life of an automobile in an environment characterized by vibration, mechanical shocks, electromagnetic interference, wide temperature ranges, and rapid temperature change. The AECC (Automotive Edge Computing Consortium) estimated in 2020 that “data traffic from connected vehicles will exceed 1,000 times the present volume, surpassing 10 exabytes per month by 2025.” These communication systems will require precise timing. We believe silicon-based timing can address many of the challenges associated with this demanding automotive ecosystem.

IoT and Mobile

The IoT revolution will enable the proliferation of billions of internet-connected devices in industrial and consumer applications. These devices can range from personal wearable devices to electronics embedded in appliances and industrial machinery. Many of these devices need to package a significant amount of electronics in a limited battery-powered and size-constrained form factor, while still requiring high performance and high accuracy. Due to the ability to integrate with ICs, we believe silicon-based timing solutions are well-suited to optimize footprint, reliability, and power consumption of the overall system within IoT and mobile devices.

Aerospace and Defense

Timing devices used in aerospace and defense applications such as rockets and satellites need to withstand extreme vibration forces and temperature gradients during operation. Quartz-based solutions can be impacted by vibrating forces acting on the whole system. MEMS timing devices are well-suited for these applications, as they provide up to 40 times better stability under vibration than comparable quartz-based solutions.

Our Solutions and Technology

Our silicon timing solutions comprise:

6

---

 

We design each key building block of the timing system, from MEMS resonators to oscillator circuits to clock ICs. Our ability to combine our MEMS resonators with analog-mixed signal components in a fabless semiconductor supply chain allows us to build full timing solutions from the ground up, enabling our customers to focus on their core expertise.

Our solutions are programmable across multiple characteristics including frequencies, stability metrics, voltage parameters, and temperature ranges, among others, and offer the following benefits:

7

---

 

Our Strategy

Our objective is to be the leading timing solution provider for advanced and challenging applications. Our solutions not only displace existing products by providing improved performance across a range of operational attributes, but also enable next-generation devices by providing high performance at affordable price points. Key elements of our strategy include:

Our Products

Our silicon timing products are designed to address a wide range of applications across a broad array of end markets. Our product portfolio encompasses oscillators, clock ICs, and resonators. The programmability of our product platforms enables us to generate solutions quickly to customer specifications.

8

---

 

Today, we primarily supply oscillator products that comprise a MEMS resonator and an analog mixed-signal IC that are integrated into a package. The following table illustrates our current portfolio of promoted products by target end market:

 

 

Our Customers

We primarily sell our timing products to distributors and resellers, who in turn sell our products to our end customers. We work closely with our end customers throughout their design cycles and are able to develop long-term relationships as our technology becomes embedded in their products. As a result, we believe our products are well-positioned to be designed into their current systems and we are well-positioned to develop next generation solutions for their future products.

Pernas Electronics Co., Ltd. (“Pernas”) directly accounted for 26% and 17% of our revenue for the years ended December 31, 2020 and 2019, respectively, Quantek Technology Corporation (“Quantek”) directly accounted for 18% and 22% of our revenue for the years ended December 31, 2020 and 2019, respectively and Arrow Electronics, Inc. (“Arrow”) directly accounted for 15% and 19% of our revenue for the years ended December 31, 2020 and 2019, respectively. Other than Pernas, Quantek, and Arrow, no other single customer accounted for more than 10% of our revenue in the years ended December 31, 2020 and December 31, 2019.

9

---

 

Based on the sell-through information provided to us from distributors and resellers who identify end customers, we believe that the majority of our products sold to Pernas and Quantek are in turn incorporated into products of Apple Inc. (“Apple”), our largest end customer. As a result, we believe revenue attributable to our largest end customer accounted for approximately 40% and 35% of our revenue for the years ended December 31, 2020 and 2019, respectively.

Sales and Marketing

Our customers’ design cycle from initial engagement to volume shipment typically ranges from six months to three years, with product life cycles of up to ten years or more. For many of our products, early engagement with our customers’ technical staff is critical for success. To ensure an adequate level of early engagement, our sales, marketing, and customer and development engineers work closely with our customers and channel partners to understand, identify, and propose solutions to their systems’ challenges. We work closely with our customers, including technology leaders such as Nokia for the communications markets, to anticipate end customer market needs. In some cases, we work with our end customers to better understand the end customers’ market trends and new requirements that are being placed on our customers.

We sell our products worldwide through multiple channels, including our direct sales force and a network of distributors, contract manufacturers, contracted sales representatives, resellers, and independent design houses. Our global sales strategy includes direct sales and distributors covering over 10,000 end customer accounts since inception.

We have a strategic accounts strategy with dedicated account owners and our direct sales force focused on key decision-makers to provide high-value solutions for unique customer requirements. We intend to continue to expand our sales and marketing efforts through increased collaboration with our distributors, resellers, and contracted sales representatives. In addition, we intend to introduce a self-service web portal, which will support 24/7 availability and leverage an inside sales team to support a “self-service model” for customers.

We promote our products and brand through various means including digital marketing and online advertising, press releases, contributed articles, speaking opportunities, trade events, customer events, public relations and industry analyst relations.

Seasonality

Our revenue is subject to some seasonal variation.  Based on the production schedules of key customers, our products typically see stronger revenue in the second half of our fiscal year. However, there can be no assurance that this trend will continue.

Manufacturing

We operate a fabless business model and use third-party foundries and assembly and test contractors to manufacture, assemble and test our semiconductor products. This outsourced manufacturing approach allows us to focus our resources on the design, sale, and marketing of our products. In addition, we believe that outsourcing many of our manufacturing and assembly activities provides us with the flexibility needed to respond to new market opportunities and scale for customer demand, simplifies our operations, and significantly reduces our capital commitments.

10

---

 

We subject our third-party manufacturing contractors to rigorous qualification requirements to meet the high quality and reliability standards required of our products. We carefully qualify each of our partners and their processes before applying the technology to our products. Our engineers work closely with our foundries and other contractors to increase yield, lower manufacturing costs, and improve product quality.

We have a supply agreement with Bosch under which Bosch has agreed to fabricate our MEMS wafers based on purchase orders placed by us. Bosch has discretion whether to accept our purchase orders, and we can terminate purchase orders for convenience by giving written notice prior to shipment. The initial term of the supply agreement is for ten years through February 2027 and automatically renews unless terminated by either party with three years’ advance notice beginning in February 2024. Other than Bosch, we do not have long-term supply agreements with most of our third-party manufacturing contractors, and we purchase products on a purchase order basis.

Research and Development

We believe that our future success depends on our ability to introduce enhancements on our existing products and to develop new products for both existing and new markets. As a result, a significant majority of our operating expenses has been allocated towards this effort. Our research and development efforts are focused primarily on MEMS and advanced clock IC design and advanced system-level integration for timing solutions.

We have assembled a core team of experienced engineers and systems designers who conduct research and development activities in the United States, the Netherlands, Japan and Ukraine. As of December 31, 2020, we had 86 engineers worldwide (representing approximately 46% of our total employee base).

Intellectual Property

We rely primarily on patent, copyright, trademark, and trade secret laws, as well as confidentiality and non-disclosure agreements, and other contractual protections, to protect our technologies and proprietary know-how. As of December 31, 2020, we had 73 issued U.S. patents, expiring generally between 2026 and 2039, and 27 pending U.S. patent applications. We also had one foreign issued patent expiring in 2039 and four pending foreign patent applications. Our issued patents and pending patent applications generally relate to our MEMS fabrication process, MEMS resonators, circuits, packaging, and oscillator systems.

In addition to our own intellectual property, we also use third-party licenses for certain technologies embedded in our MEMS solutions. For example, we have a license to certain patents from Bosch relating to the design and manufacture of MEMS-based timing applications. The patent rights obtained under the license agreement expire between 2021 and 2029, and the license agreement expires upon expiration of the last patent licensed under the agreement. If we were to lose the benefit of these patents or other licensed technology used in our business, it could harm our business and our ability to compete.

We generally control access to and use of our confidential information and trade secrets through the use of internal and external controls, including contractual protections with employees, contractors, and customers. We rely in

11

---

 

part on the laws of the United States and international laws to protect our work. All employees and consultants are required to execute confidentiality agreements in connection with their employment and consulting relationships with us. We also require them to agree to disclose and assign to us all inventions conceived or made in connection with the employment or consulting relationship. However, we cannot guarantee that we have entered into such agreements with every such party and we may not have adequate remedies in case of a breach of any such agreements. Our trade secrets could be disclosed to our competitors or others may independently develop substantially equivalent technologies or otherwise gain access to our trade secrets. Trade secrets can be difficult to protect and some courts inside and outside of the United States are less willing or unwilling to protect trade secrets. Despite our efforts to protect our intellectual property, unauthorized parties may still copy, misappropriate, or otherwise obtain and use our software, technology, or other information that we regard as our proprietary intellectual property. In addition, we intend to expand our international operations, and effective patent, copyright, trademark, and trade secret, and other intellectual property protection may not be available or may be limited in some foreign countries.

The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights and positions, which has resulted in protracted and expensive litigation for many companies. We have in the past received, and we may in the future receive, communications alleging liability for damages or challenging the validity of our intellectual property or proprietary rights. For example, in March 2019, VTT Technical Research Centre of Finland, Ltd. filed suit in the United States District Court for the Northern District of California alleging infringement by us of a U.S. patent. Any litigation, regardless of success or merit, could cause us to incur substantial expenses, reduce our sales, and divert the efforts of our management and other personnel. In the event we receive an adverse result in any litigation, we could be required to pay substantial damages, seek licenses from third parties, which may not be available on reasonable terms or at all, cease sale of products, expend significant resources to develop alternative technology, or discontinue the use of processes requiring the relevant technology.

Competition

The global semiconductor market in general, and the timing market in particular, is highly competitive. We compete in different target markets based on a number of competitive factors. We expect competition to increase and intensify as additional companies enter our markets and as internal resources of large original equipment manufacturers (“OEMs”) grow. Increased competition could result in price pressure, reduced gross margins, and loss of market share, any of which could harm our business, financial condition, and results of operations.

Our competitors range from large, international companies offering a wide range of timing products to smaller companies specializing in narrow market verticals. In the MEMS-based oscillator market, we primarily compete against Microchip Technology Inc. (“MCHP”) through their acquisition of Micrel, Incorporated. In the MEMS-based resonator market, we primarily compete against Murata Manufacturing Co., Ltd. In the analog mixed-signal IC and clocking market, we primarily compete against Renesas Electronics Corporation (through their acquisition of Integrated Device Technology, Inc.), Silicon Laboratories Inc., Texas Instruments Incorporated, Micrel (which is owned by MCHP), and Analog Devices, Inc. In the oscillator market, we primarily compete against quartz crystal suppliers such as Rakon Limited, Daishinku Corporation, Nihon Dempa Kogyo Co., Ltd., TXC Corporation, Seiko Epson Corporation, Kyocera Corporation and Vectron International (which is owned by MCHP). These quartz crystal suppliers typically own their own quartz manufacturing facilities.

Our ability to compete successfully depends on elements both within and outside of our control, including industry and general economic trends. During past periods of downturns in our industry, competition in the markets in which we operate intensified as our customers reduced their purchase orders. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support, and other resources, are more established than we are, and have significantly better brand recognition and broader product offerings which may enable them to better withstand similar adverse economic or market conditions in the future. Any such development may materially and adversely affect our current and future target markets and our ability to compete successfully in those markets. We maintain our competitive position through our ability to successfully design, develop, and market complex timing solutions for the customers we serve.

12

---

 

Government Regulation

Our business activities are worldwide and subject to various federal, state, local and foreign regulations and our products are governed by a number of rules and regulations.  To date, we have not incurred material expenses related to compliance with these regulations.

Human Capital Resources and Empowerment

We believe that our company culture, which promotes innovation, open communication, and teamwork, has been critical to our success. Our success depends largely upon the continued services of our executive officers and other key employees and on our ability to continue to attract, retain and motivate qualified employees, particularly highly-skilled engineers involved in the design, development, support and manufacture of new and existing products and processes and our sales and marketing team critical to achieving design wins, creating our brand awareness and reputation and building long-lasting relationships with our customers and other industry participants. In order for us to attract the best talent, we aim to offer challenging work in an environment that enables our employees to learn, grow and reach their full potential.

Our human capital resource objectives include identifying, recruiting, retaining, incentivizing and integrating our existing and future employees. We strive to attract and retain the most talented employees in the industry and across the globe by offering competitive compensation and benefits that support their health, financial and emotional well-being. Our compensation philosophy is based on rewarding each employee’s individual contributions. We use a combination of fixed and variable pay including base salary, bonuses, performance awards and stock-based compensation. The principal purposes of our equity incentive plans are to attract, retain and motivate selected employees through the granting of stock-based compensation awards. We offer employees benefits that vary by country and are designed to meet or exceed local laws and to be competitive in the marketplace. Examples of benefits offered in the U.S. include: a 401(k) plan with employer contributions; health benefits; life, business travel and disability insurance; additional voluntary insurance; paid time off and parental leave and paid counseling assistance. For further information concerning our equity incentive plans, see Note 9, Stock-based Compensation, of the Notes to Consolidated Financial Statements contained in Part II, Item 8 of this Annual Report on Form 10-K.

We are committed to the health, safety and wellness of our employees. We provide our employees and their families with access to a variety of health and wellness programs, including benefits that support their physical and mental health.  In response to the COVID-19 pandemic, we implemented changes that we consider to be in the best interest of our employees. As a result of the COVID-19 pandemic, the majority of our employees are working from home. We have implemented additional safety measures for employees continuing critical on-site work. We believe we have been able to preserve our business continuity without sacrificing our commitment to keeping our employees safe during the COVID-19 pandemic.

We regularly review our employees and assess the needs of the business to identify our talent needs. We encourage all employees to continue learning and provide internal opportunities for cross functional work to support this. We regularly review succession plans and focus on promoting internal talent to help grow our employees' careers.

We conducted a survey in fiscal 2020 and had a participation rate of over 80% of all our employees and the survey results indicated that we excel in areas including initiative, empowerment, opportunities to learn and grow and overall culture.

As of December 31, 2020, we had 187 full-time equivalent employees located in the United States, France, Malaysia, the Netherlands, Taiwan, Japan and Ukraine, including 99 in research and development, 69 in sales, general and administrative, and 19 in operations. We consider relations with our employees to be good and have never experienced a work stoppage. None of our employees are either represented by a labor union or subject to a collective bargaining agreement.

13

---

 

Corporate Information

We were incorporated in Delaware on December 3, 2003. Our principal executive offices are located at 5451 Patrick Henry Drive, Santa Clara, California 95054, and our telephone number is (408) 328-4400. Our corporate website address is www.sitime.com. Information found on, or accessible through, our website is not a part of, and is not incorporated into, this Annual Report on Form 10-K. Unless the context requires otherwise, references in this Annual Report on Form 10-K to “SiTime,” “the company,” “we,” “us” and “our” refer to SiTime Corporation and its wholly-owned subsidiaries on a consolidated basis.

Available Information

Our website is located at https://www.sitime.com. Copies of our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, are available, free of charge, on our investor relations website as soon as reasonably practicable after we file such material electronically with or furnish it to the Securities and Exchange Commission (the “SEC”). The SEC also maintains a website that contains our SEC filings. The address of the website is www.sec.gov.

Executive Officers of the Registrant

The following table sets forth information regarding our executive officers as of December 31, 2020:

 

 

Rajesh Vashist has served as our Chief Executive Officer and as a member of our board of directors since September 2007 and as Chairman of our board of directors since November 2019. Prior to joining SiTime, Mr. Vashist served as chief executive officer and chairman of the board of directors of Ikanos Communications, Inc., a semiconductor and software development company, from July 1999 to October 2006. Mr. Vashist holds a B.S. in engineering from NIT Rourkela in India and a MBA from Marquette University.

Arthur D. Chadwick has served as our Executive Vice President, Chief Financial Officer since September 2019. Prior to joining SiTime, from December 2004 to July 2018, Mr. Chadwick served as vice president of finance and administration, and chief financial officer of Cavium, Inc., a fabless semiconductor company that was listed on Nasdaq and subsequently acquired by Marvell Technology Group Ltd. in July 2018, where he was responsible for financial strategy, planning, accounting and reporting, and treasury and tax. From January 1989 to October 2004, Mr. Chadwick served as senior vice president of finance and administration, and chief financial officer of Pinnacle Systems Inc., a digital video editing company that was listed on Nasdaq and acquired by Avid Technology, Inc. in August 2005. Prior to 1989, Mr. Chadwick has held positions at Gould Semiconductor, ams AG, and American Microsystems. Mr. Chadwick holds a B.S. in Mathematics and Physics and a MBA in finance, both from the University of Michigan.

Lionel Bonnot has served as our Executive Vice President of Worldwide Sales and Business Development since July 2019 and as Executive Vice President of Business Development from February 2018 to July 2019. Prior to joining SiTime, Mr. Bonnot was at Quantenna Communications (Nasdaq: QTNA), a wireless communication solution company that designs and develops radio frequency and digital Wi-Fi chips, from December 2007 to December 2017. During his 10-year tenure at Quantenna, Mr. Bonnot served as vice president of worldwide sales, senior vice president of business development, and most recently as senior vice president of marketing and business development where he was responsible for product strategy and roadmap, corporate strategy, partnerships and mergers and acquisitions. Mr. Bonnot also held various positions at Ikanos Communications, Inc., a semiconductor and software development

14

---

 

company, from December 2001 to December 2007, including vice president of Europe, vice president of sales for North America and EMEA, and senior director of worldwide sales. Mr. Bonnot holds a M.S. in Computer Science from Ecole Nationale Supérieure d’Informatique in Paris, France.

Piyush B. Sevalia has served as our Executive Vice President of Marketing since April 2012. Mr. Sevalia previously served as our Vice President of Marketing from March 2008 to April 2012. Prior to joining SiTime, Mr. Sevalia held various marketing positions at Ikanos Communications, a semiconductor and software development company, including vice president of access infrastructure products from October 2006 to March 2008, marketing head of access products from April 2006 to September 2006, and director of product marketing from September 2000 to March 2006. From July 1991 to September 2000, Mr. Sevalia held various positions at Cypress Semiconductor, a semiconductor company, including senior marketing manager, strategic marketing manager, senior / staff applications engineer, and applications engineer. Mr. Sevalia holds a bachelor’s degree in electrical engineering from the University of Mumbai, a master’s degree in electrical engineering from the University of Michigan, and a master’s degree in business administration from the University of California, Berkeley.

Vincent P. Pangrazio has served as our Executive Vice President, Chief Legal Officer & Corporate Secretary since June 2020. Mr. Pangrazio previously served as our acting General Counsel in a consultant capacity from March 2020 to June 2020 and had a private law practice from December 2019 until he joined SiTime. From July 2018 to September 2019, Mr. Pangrazio served as Chief Administrative and Legal Officer of HealthTap, Inc., a provider of online access to primary healthcare, where he was responsible for all legal matters. From March 2011 to July 2018, Mr. Pangrazio served as Senior Vice President and General Counsel of Cavium, Inc., a fabless semiconductor company that was listed on Nasdaq and subsequently acquired by Marvell Technology Group Ltd. in July 2018, where he was responsible for management of corporate legal compliance as well as the IT and facilities departments. From January 2000 to March 2011, Mr. Pangrazio was a partner in the business department at the law firm of Cooley LLP. From 1999 to 2000, Mr. Pangrazio served as Vice President and General Counsel for Women.com Networks, Inc., a network of online sites featuring content and services for women. From 1993 to 1999, Mr. Pangrazio was an associate in the business department at Cooley LLP. Mr. Pangrazio received a BS degree in Electrical Engineering from Loyola Marymount University and a J.D. degree from Loyola Law School.

Fariborz Assaderaghi has served as our Executive Vice President, Technology & Engineering since December 2020. Prior to joining SiTime, he was the Senior Vice President, Engineering, at Sunrise Memory Corporation from March 2020 until December 2020, where he was responsible for technology and product development. Prior to that, from February 2019 until March 2020, he was the Senior Vice President, Innovation and Advanced Technologies at NXP Semiconductors where he was responsible for technical roadmaps and innovation funnels, and before that held the position of Senior Vice President, Chief Technology Officer for IoT and Security division of NXP Semiconductors from February 2016 until February 2019 where he was jointly responsible for leading research and development. Prior to that, from June 2012 until February 2016, he was the Vice President of the Advanced Technology Development at InvenSense Inc. Prior to that Mr. Assaderaghi has held various engineering positions at SiTime, Rambus, and IBM. Mr. Assaderaghi has a Master of Science in Electrical Engineering and a Ph. D. in Electrical Engineering and Computer Science both from the University of California in Berkeley.

Item 1A. Risk Factors.

Risks Related to Our Business and Our Industry

The COVID-19 pandemic could adversely affect our business, results of operations, and financial condition.

The effects of the ongoing COVID-19 pandemic on our business are evolving and difficult to predict. To date, the COVID-19 pandemic has significantly and negatively impacted the global economy and it is unclear how long the pandemic will continue to do so. To combat the spread of COVID-19, the United States and other foreign countries in which we operate have imposed measures such as quarantines and “shelter-in-place” orders that are restricting business operations and travel and requiring individuals to work from home (“WFH”), which has impacted all aspects of our business as well as those of the third-parties we rely upon for our manufacturing, assembly, testing, shipping and other operations. The continuation of WFH and other restrictions for an extended period of time may negatively impact our

15

---

 

productivity, product development, operations, sales and support, business and financial results. Among other things, the continued COVID-19 pandemic may result in:

The COVID-19 pandemic has also caused significant uncertainty and volatility in global financial markets and the trading prices for the common stock of technology companies, including us. Due to such volatility, we may not be able to raise additional capital, if needed, on favorable terms, or at all. Further adverse economic events resulting from the COVID-19 pandemic, including a recession, depression, or other sustained economic downturn, could materially and adversely affect our business, access to capital markets and the value of our common stock.

In addition, given the inherent uncertainty surrounding COVID-19 due to rapidly changing governmental directives, public health challenges and economic disruption and the duration of the foregoing, the potential impact that the COVID-19 pandemic could have on the other risk factors described in this “Risk Factors” section remain unclear.

As a result of the COVID pandemic, we believe we have experienced some delay and disruption in the manufacture, shipment, and sales of, and overall demand for, our products. In addition, we believe the production capabilities of our suppliers has been, and will likely continue to be, impacted as a result of quarantines, closures of production facilities, lack of supplies, or delays caused by restrictions on travel or WFH orders. The continued disruption in the manufacture, shipment and sales of our products may negatively and materially impact our operating and financial operating results, including revenue, gross margins, operating margins, cash flows and other operating results. The resumption of normal business operations after such disruptions may be delayed and a resurgence of COVID-19 could occur resulting in continued disruption to us, our suppliers, and/or our customers. As a result, the effects of the COVID-19 pandemic could have a material adverse impact on our business, results of operations and financial condition in the future.

A downturn in the worldwide economy may harm our business.

The COVID-19 pandemic could cause a further downturn in the worldwide economy, which would likely result in reduced demand for our products and our customers’ products. Reduced demand for our products could result in significant decreases in sales and margins. In addition, the deterioration in credit markets could limit our ability to obtain external financing to fund our operations and capital expenditures. We may experience losses on our holdings of cash and investments due to failures of financial institutions and other parties. Adverse economic conditions may also result in a higher rate of losses on our accounts receivables due to credit defaults. As a result, a downturn in the worldwide economy could have a material adverse effect on our business, results of operations, or financial condition.

We currently depend on one end customer for a large portion of our revenue. The loss of, or a significant reduction in orders from our customers, including this end customer, could significantly reduce our revenue and adversely impact our operating results.

We believe that our operating results for the foreseeable future will continue to depend to a significant extent on revenue attributable to Apple, our largest end customer. Sales attributable to this end customer have historically accounted for a large portion of our revenue and accounted for approximately 40% and 35% of our revenue for the years ended December 31, 2020 and 2019, respectively. Revenue attributable to this end customer increased in absolute dollars and as a percentage of revenue from 2019 to 2020. We anticipate revenue attributable to this customer will fluctuate from period to period, although we expect to remain dependent on this end customer for a substantial portion

16

---

 

of our revenue for the foreseeable future. Although we sell our products to this customer through distributors on a purchase order basis, including Pernas Electronics Co., Ltd. (“Pernas”), Arrow Electronics, Inc. (“Arrow”), and Quantek Technology Corporation (“Quantek”), we have a development and supply agreement, which provides a general framework for certain transactions with Apple. This agreement continues until either party terminates for material breach. Under this agreement, we have agreed to develop and deliver new products to this end customer at its request, provided it also meets our business purposes, and have agreed to indemnify it for intellectual property infringement or any injury or damages caused by our products. This end customer does not have any minimum or binding purchase obligations to us under this agreement and could elect to discontinue making purchases from us with little or no notice. If our end customers were to choose to work with other manufacturers or our relationships with our customers is disrupted for any reason, it could have a significant negative impact on our business. Any reduction in sales attributable to our larger customers, including our largest end customer, would have a significant and disproportionate impact on our business, financial condition, and results of operations.

Because our sales are made pursuant to standard purchase orders, orders may be cancelled, reduced, or rescheduled with little or no notice and without penalty. Cancellations of orders could result in the loss of anticipated sales without allowing us sufficient time to reduce our inventory and operating expenses. In addition, changes in forecasts or the timing of orders from our customers expose us to the risks of inventory shortages or excess inventory. This in turn could cause our operating results to fluctuate.

Our end customers, or the distributors through which we sell to these customers, may choose to use products in addition to ours, use a different product altogether, or develop an in-house solution. Any of these events could significantly harm our business, financial condition, and results of operations. In addition, if our distributors’ relationships with our end customers, including our larger end customers, are disrupted for inability to deliver sufficient products or for any other reason, it could have a significant negative impact on our business, financial condition, and results of operations.

If we are unable to expand or further diversify our customer base, our business, financial condition, and results of operations could suffer.

We sell our products primarily through distributors and resellers, who in turn sell to our end customers. For both the years ended December 31, 2020 and 2019, our top three distributors by revenue together accounted for approximately 59% of our revenue. Based on our shipment information, we believe that revenue attributable to our ten largest end customers accounted for 58%, and 57% of our revenue for the years ended December 31, 2020 and 2019, respectively. Sales attributable to our largest end customer accounted for approximately 40%, and 35%, of our revenue for the years ended December 31, 2020 and 2019, respectively. We expect the composition of our largest end customers to vary from period to period, and that revenue attributable to our largest ten end customers in any given period may decline over time. Our relationships with existing customers may deter potential customers who compete with these customers from buying our silicon timing systems solutions. If we are unable to expand or further diversify our customer base, it could harm our business, financial condition, and results of operations.

Because we do not have long-term purchase commitments with our customers, orders may be cancelled, reduced, or rescheduled with little or no notice, which in turn exposes us to inventory risk, and may cause our business and results of operations to suffer.

We sell our products primarily through distributors and resellers, with no long-term or minimum purchase commitments from them or their end customers. Substantially all of our sales to date have been made on a purchase order basis, which orders may be cancelled, changed, or rescheduled with little or no notice or penalty. As a result, our revenue and operating results could fluctuate materially and could be materially and disproportionately impacted by purchasing decisions of our customers, including our larger customers. In the future, our distributors or their end customers may decide to purchase fewer units than they have in the past, may alter their purchasing patterns at any time with limited or no notice, or may decide not to continue to purchase our silicon timing systems solutions at all, any of which could cause our revenue to decline materially and materially harm our business, financial condition, and results of operations. Cancellations of, reductions in, or rescheduling of customer orders could also result in the loss of anticipated sales without allowing us sufficient time to reduce our inventory and operating expenses, as a substantial

17

---

 

portion of our expenses are fixed at least in the short term. In addition, changes in forecasts or the timing of orders expose us to the risks of inventory shortages or excess inventory. Any of the foregoing events could materially and adversely affect our business, financial condition, and results of operations.

Our revenue and operating results may fluctuate from period to period, which could cause our stock price to fluctuate.

Our revenue and operating results have fluctuated in the past and may fluctuate from period to period in the future due to a variety of factors, many of which are beyond our control. Factors relating to our business that may contribute to these fluctuations include the following factors, as well as other factors described elsewhere in this report:

As a result of these and other factors, you should not rely on the results of any prior quarterly or annual periods, or any historical trends reflected in such results, as indications of our future revenue or operating performance. Fluctuations in our revenue and operating results could cause our stock price to decline and, as a result, you may lose some or all of your investment.

We have an accumulated deficit and have incurred net losses in the past, and we may continue to incur net losses in the future.

As of December 31, 2020 and 2019, we had an accumulated deficit of $63.4 million, and $54.0 million, respectively. We generated net losses of $9.4 million, and $6.6 million in the years ended December 31, 2020 and 2019, respectively. The loss in 2019 was primarily due to a decrease in revenue from customers in Asia primarily as a result of lower sales volume, as well as a reduction in revenue from our largest end customer. The loss in 2020 was primarily

18

---

 

due to increased stock-based compensation expenses in connection with our initial public offering in late 2019 and additional costs related to being a public company. We may continue to incur net losses in the future.

We expect to continue to make significant investments to support our research and development, sales and marketing and general and administrative functions. As a public company, we also continue to incur significant additional legal, accounting, and other expenses. If our revenue growth does not exceed the growth of these anticipated expenses, we may not be able to achieve or sustain profitability, and our stock price could decline.

Our success and future revenue depend on our ability to achieve design wins and to convince our current and prospective customers to design our products into their product offerings. If we do not continue to win designs or our products are not designed into our customers’ product offerings, our results of operations and business will be harmed.

We sell our silicon timing systems solutions to customers who select our solutions for inclusion in their product offerings. This selection process is typically lengthy and may require us to incur significant design and development expenditures and dedicate scarce engineering resources in pursuit of a single design win with no assurance that our solutions will be selected. If we fail to convince our current or prospective customers to include our products in their product offerings or to achieve a consistent number of design wins, our business, financial condition, and results of operations will be harmed.

Because of our extended sales cycle, our revenue in future years is highly dependent on design wins we are awarded in prior years. It is typical that a design win will not result in meaningful revenue for a year or more, if at all. If we do not continue to achieve design wins in the short term, our revenue in the following years will deteriorate.

Further, a significant portion of our revenue in any period may depend on a single product design win with a large customer. As a result, the loss of any key design win or any significant delay in the ramp of volume production of the customer’s products into which our product is designed could adversely affect our business, financial condition, and results of operations. We may not be able to maintain sales to our key customers or continue to secure key design wins for a variety of reasons, and our customers can stop incorporating our products into their product offerings with limited notice to us and suffer little or no penalty.

If we fail to anticipate or respond to technological shifts or market demands, or to timely develop new or enhanced products or technologies in response to the same, it could result in decreased revenue and the loss of our design wins to our competitors. Due to the interdependence of various components in the systems within which our products and the products of our competitors operate, customers are unlikely to change to another design, once adopted, until the next generation of a technology. As a result, if we fail to introduce new or enhanced products that meet the needs of our customers or penetrate new markets in a timely fashion, and our designs do not gain acceptance, we will lose market share and our competitive position.

The loss of a key customer or design win, a reduction in sales to any key customer, a significant delay or negative development in our customers’ product development plans, or our inability to attract new significant customers or secure new key design wins could seriously impact our revenue and materially and adversely affect our business, financial condition, and results of operations.

We may experience difficulties demonstrating the value to customers of newer solutions if they believe existing solutions are adequate to meet end customer expectations. If we are unable to sell new generations of our product, our business would be harmed.

As we develop and introduce new solutions, we face the risk that customers may not value or be willing to bear the cost of incorporating these newer solutions into their product offerings, particularly if they believe their customers are satisfied with prior offerings. Regardless of the improved features or superior performance of the newer solutions, customers may be unwilling to adopt our new solutions due to design or pricing constraints. Because of the extensive time and resources that we invest in developing new solutions, if we are unable to sell new generations of our solutions, our revenue could decline and our business, financial condition, and results of operations would be negatively affected.

19

---

 

Some of our customer and other third-party agreements provide for joint and/or custom product development, which subject us to a number of risks, and any failure to execute on any of these arrangements could have a material adverse effect on our business, results of operations, and financial condition.

We have entered into development, product collaboration and technology licensing arrangements with some of our customers and other third parties, and we expect to enter into new arrangements of these kinds from time to time in the future. These agreements may increase risks for us, such as the risks related to timely delivery of new products, risks associated with the ownership of the intellectual property developed, risks that such activities may not result in products that are commercially successful or available in a timely fashion, and risks that third parties involved may abandon or fail to perform their obligations related to such agreements. In addition, such arrangements may provide for exclusivity periods during which we may only sell specified products or technologies to that particular customer. Any failure to timely develop commercially successful products under such arrangements as a result of any of these and other challenges could have a material adverse effect on our business, results of operations, and financial condition.

The success of our products is dependent on our customers’ ability to develop products that achieve market acceptance, and our customers’ failure to do so could negatively affect our business.

The success of our silicon timing systems solutions is heavily dependent on the timely introduction, quality, and market acceptance of our customers’ products incorporating our solutions, which are impacted by factors beyond our control. Our customers’ products are often very complex and subject to design complexities that may result in design flaws, as well as potential defects, errors, and bugs. We have in the past been subject to delays and project cancellations as a result of design flaws in the products developed by our customers, changing market requirements, such as the customer adding a new feature, or because a customer’s product fails their end customer’s evaluation or field trial. In other cases, customer products are delayed due to incompatible deliverables from other vendors. We incur significant design and development costs in connection with designing our products for customers’ products that may not ultimately achieve market acceptance. If our customers discover design flaws, defects, errors, or bugs in their products, or if they experience changing market requirements, failed evaluations or field trials, or incompatible deliverables from other vendors, they may delay, change, or cancel a project, and we may have incurred significant additional development costs and may not be able to recoup our costs, which in turn would adversely affect our business, financial condition, and results of operations.

Our target customer and product markets may not grow or develop as we currently expect, and if we fail to penetrate new markets and scale successfully within those markets, our revenue and financial condition would be harmed.

Our target markets include the enterprise and telecommunications infrastructure, automotive, industrial, IoT and mobile, and aerospace and defense markets. Substantially all of our revenue for the years ended December 31, 2020 and 2019 was derived from sales in the IoT and mobile, industrial, and consumer markets. In 2017, we began introducing products for the automotive market. In addition, within the timing market, substantially all of our revenue to date has been attributable to sales of MEMS oscillators. We recently introduced products into the clock IC market, which we began sampling in the second quarter of 2019, and we intend to further focus on clock IC and timing sync solutions in the future. Any deterioration in our target customer or product markets or reduction in capital spending to support these markets could lead to a reduction in demand for our products, which would adversely affect our revenue and results of operations. Further, if our target customer markets, including the 5G communications or IoT and mobile markets, do not grow or develop in ways that we currently expect, demand for our technology may not materialize as expected, which would also negatively impact our business, financial condition, and results of operations.

We may be unable to predict the timing or development of trends in our target markets with any accuracy. If we fail to accurately predict market requirements or market demand for these solutions, our business will suffer. A market shift towards an industry standard that we may not support could significantly decrease the demand for our solutions.

Our future revenue growth, if any, will depend in part on our ability to expand within our existing markets, our ability to continue to penetrate emerging markets, such as the 5G communications market, which we entered in 2019, and our ability to enter into new markets, such as the industrial, medical, and military markets. Each of these markets presents distinct and substantial challenges and risks and, in many cases, requires us to develop new customized solutions to address the particular requirements of that market. Meeting the technical requirements and securing design

20

---

 

wins in any of these new markets will require a substantial investment of our time and resources. We cannot assure you that we will secure design wins from these or other new markets, or that we will achieve meaningful revenue from sales in these markets. If any of these markets do not develop as we currently anticipate or if we are unable to penetrate them and scale in them successfully, our revenue could decline.

The average selling prices of our individual products have fluctuated historically over time and may do so in the future, which could harm our revenue and gross margins.

Although on average selling prices of our products have increased over time as we introduce higher end products, the average selling prices of our individual products generally decrease over time. Our revenue is derived from sales to large distributors and, in some cases, we have agreed in advance to price reductions, generally over a period of time ranging from two months to three years, once the specified product begins to ship in volume. However, our customers may change their purchase orders and demand forecasts at any time with limited notice due in part to fluctuating end-market demand, which can sometimes lead to price renegotiations. Although these price renegotiations can sometimes result in the average selling prices fluctuating over the shorter term, we expect average selling prices generally to decline over the longer term as our products and our end customers’ products mature.

We seek to offset the anticipated reductions in our average selling prices by reducing the cost of our products through improvements in manufacturing yields and lower wafer, assembly, and testing costs, developing new products, enhancing lower-cost products on a timely basis, and increasing unit sales. However, if we are unable to offset these anticipated reductions in our average selling prices, our business, financial condition, and results of operations could be negatively affected.

If we are not able to successfully introduce and ship in volume new products in a timely manner, our business and revenue will suffer.

We have developed products that we anticipate will have product life cycles of ten years or more, as well as other products in more volatile high growth or rapidly changing areas, which may have shorter life cycles. Our future success depends, in part, on our ability to develop and introduce new technologies and products that generate new sources of revenue to replace, or build upon, existing revenue streams. If we are unable to repeatedly introduce, in successive years, new products that ship in volume, or if our transition to these new products does not successfully occur prior to any decrease in revenue from our prior products, our revenue will likely decline significantly and rapidly.

Our gross margins may fluctuate due to a variety of factors, which could negatively impact our results of operations and our financial condition.

Our gross margins may fluctuate due to a number of factors, including customer and product mix, market acceptance of our new products, timing and seasonality of the end-market demand, yield, wafer pricing, packaging and testing costs, competitive pricing dynamics, the impact of the COVID-19 pandemic and geographic and market pricing strategies.

To attract new customers or retain existing customers, we have in the past and will in the future offer certain customers favorable prices, which would decrease our average selling prices and likely impact gross margins. Further, we may also offer pricing incentives to our customers on earlier generations of products that inherently have a higher cost structure, which would negatively affect our gross margins. In addition, in the event our customers, including our larger end customers, exert more pressure with respect to pricing and other terms with us, it could put downward pressure on our margins.

Because we do not operate our own manufacturing, assembly, or testing facilities, we may not be able to reduce our costs as rapidly as companies that operate their own facilities, and our costs may even increase, which could further reduce our gross margins. We rely primarily on obtaining yield improvements and volume-based cost reductions to drive cost reductions in the manufacture of existing products, introducing new products that incorporate advanced features and optimize die size, and other price and performance factors that enable us to increase revenue while

21

---

 

maintaining gross margins. To the extent that such cost reductions or revenue increases do not occur at a sufficient level and in a timely manner, our business, financial condition, and results of operations could be adversely affected.

In addition, we maintain an inventory of our products at various stages of production and in some cases as finished good inventory. We hold these inventories in anticipation of customer orders. If those customer orders do not materialize in a timely manner, we may have excess or obsolete inventory which we would have to reserve or write-down, and our gross margins would be adversely affected.

Our revenue in recent periods may not be indicative of future performance and our revenue may fluctuate over time.

Our recent revenue should not be considered indicative of our future performance. For the years ended December 31, 2020 and 2019, our revenue was $116.2 million, and $84.1 million, respectively. You should not rely on our revenue for any previous quarterly or annual periods as any indication of our revenue for future fiscal periods. As we grow our business, our revenue may fluctuate in future periods due to a number of reasons, which may include slowing demand for our products, increasing competition, the impact of the COVID-19 pandemic, a decrease in the growth of our overall market or market saturation, and challenges and our failure to capitalize on growth opportunities.

If we are unable to manage our growth effectively, we may not be able to execute our business plan and our operating results could suffer.

In order to succeed in executing our business plan, we will need to manage our growth effectively as we make significant investments in research and development and sales and marketing and expand our operations and infrastructure both domestically and internationally. If our revenue does not increase to offset these increases in our expenses, we may not achieve or maintain profitability in future periods.

To manage our growth effectively, we must continue to expand our operations, engineering, financial accounting, internal management, and other systems, procedures, and controls. This may require substantial managerial and financial resources, and our efforts may not be successful. Any failure to successfully implement systems enhancements and improvements will likely have a negative impact on our ability to manage our expected growth, as well as our ability to ensure uninterrupted operation of key business systems and compliance with the rules and regulations applicable to public companies. If we are unable to manage our growth effectively, we may not be able to take advantage of market opportunities or develop new silicon timing systems solutions, and we may fail to satisfy customer product or support requirements, maintain the quality of our solutions, execute our business plan or respond to competitive pressures, any of which could negatively affect our business, financial condition, and results of operations.

Our customers require our products and our third-party contractors to undergo a lengthy and expensive qualification process, which does not assure product sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, our business and operating results would suffer.

Prior to purchasing our silicon timing systems solutions, our customers require that both our solutions and our third-party contractors undergo extensive qualification processes, which involve testing of our products in the customers’ systems, as well as testing for reliability. This qualification process may continue for several months. However, qualification of a product by a customer does not assure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision in our third-party contractors’ manufacturing process or our selection of a new supplier may require a new qualification process with our customers, which may result in delays and in our holding excess or obsolete inventory. After our products are qualified, it can take several months or more before the customer commences volume production of components or systems that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing, and management efforts, to qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, sales of those products to the customer may be precluded or delayed, which would cause our business, financial condition, and results of operations to suffer.

22

---

 

We provide a lifetime warranty on our products and may be subject to warranty or product liability claims, which could result in unexpected expenses and loss of market share.

We provide a lifetime warranty on our products and generally agree to indemnify our customers for defects in our products. We may be subject to warranty or product liability claims. These claims may require us to make significant expenditures to defend those claims, replace our solutions, refund payments, or pay damage awards. This risk is exacerbated by the lifetime warranty of our products, which exposes us to warranty claims for the entire product lifecycle.

Our silicon timing systems solutions have only been incorporated into end products for the past 13 years. Accordingly, the operation of our products and technology has not been validated over longer periods. If a customer’s product fails in use, the customer may incur significant monetary damages, including a product recall or associated replacement expenses as well as lost revenue. The customer may claim that a defect in our product caused the product failure and assert a claim against us to recover monetary damages. In certain situations, circumstances might warrant that we consider incurring the costs or expenses related to a recall of one of our products in order to avoid the potential claims that may be raised should a customer reasonably rely upon our product and suffer a failure due to a design or manufacturing process defect. In addition, the cost of defending these claims and satisfying any arbitration award or judgment with respect to these claims would result in unexpected expenses, which could be substantial, and could harm our business, financial condition, and results of operations. Although we carry product liability insurance, this insurance is subject to significant deductibles and may not adequately cover our costs arising from defects in our products or otherwise.

Defects in our products could harm our relationships with our customers and damage our reputation.

Defects in our products may cause our customers to be reluctant to buy our products, which could harm our ability to retain existing customers and attract new customers and adversely impact our reputation. The process of identifying a defective or potentially defective product in systems that have been widely distributed may be lengthy and require significant resources. Further, if we are unable to determine the root cause of a problem or find an appropriate solution, we may delay shipment to customers. As a result, we may incur significant replacement costs and contract damage claims from our customers, and our reputation, business, financial condition, and results of operations may be adversely affected.

If we fail to accurately anticipate and respond to rapid technological change in the industries in which we operate, our ability to attract and retain customers could be impaired and our competitive position could be harmed.

We operate in industries characterized by rapidly changing technologies as well as technological obsolescence. The introduction of new products by our competitors, the delay or cancellation of any of our customers’ product offerings for which our silicon timing systems solutions are designed, the market acceptance of products based on new or alternative technologies, or the emergence of new industry standards could render our existing or future products uncompetitive, obsolete, and otherwise unmarketable. Our failure to anticipate or timely develop new or enhanced products or technologies in response to changing market demand, whether due to technological shifts or otherwise, could result in the loss of customers and decreased revenue and have an adverse effect on our business, financial condition, and results of operations.

If our products do not conform to, or are not compatible with, existing or emerging industry standards, demand for our existing solutions may decrease, which in turn would harm our business and operating results.

We design certain of our products to conform to current industry standards. Some industry standards may not be widely adopted or implemented uniformly and competing standards may emerge that may be preferred by our distributors or our end customers.

Our ability to compete in the future will depend on our ability to identify and ensure compliance with evolving industry standards in our target markets, as well as in the timing IC industry. The emergence of new industry standards could render our products incompatible with products developed by third-party suppliers or make it difficult for our products to meet the requirements of certain OEMs. If our customers or our third-party suppliers adopt new or

23

---

 

competing industry standards with which our solutions are not compatible, or if industry groups fail to adopt standards with which our solutions are compatible, our products would become less desirable to our current or prospective customers. As a result, our sales would suffer, and we could be required to make significant expenditures to develop new products. Although we believe our products are compliant with applicable industry standards, proprietary enhancements may not in the future result in conformance with existing industry standards under all circumstances. If our products do not conform to, or are not compatible with, existing or emerging standards, it would harm our business, financial condition, and results of operations.

We may be unable to make the substantial investments that are required to remain competitive in our business.

The semiconductor industry requires substantial and continuous investment in research and development in order to bring to market new and enhanced solutions. We expect our research and development expenditures to increase in the future as part of our strategy to increase demand for our solutions in our current markets and to expand into additional markets. We are a smaller company with limited resources, and we may not have sufficient resources to maintain the level of investment in research and development required to remain competitive. In addition, we cannot assure you that the technologies, which are the focus of our research and development expenditures, will become commercially successful or generate any revenue.

If we fail to compete effectively, we may lose or fail to gain market share, which could negatively impact our operating results and our business.

The global semiconductor market in general, and the timing IC market in particular, is highly competitive. We expect competition to increase and intensify as additional semiconductor companies enter our target markets, and as internal silicon design resources of large OEMs grow. Increased competition could result in price pressure, reduced gross margins and loss of market share, any of which could harm our business, financial condition, and results of operations. Our competitors range from large, international companies offering a wide range of semiconductor products to smaller companies specializing in narrow market verticals. In the MEMS-based oscillator market, we primarily compete against Microchip Technology Inc. (“MCHP”) through their acquisition of Micrel, Incorporated. In the MEMS-based resonator market, we primarily compete against Murata Manufacturing Co., Ltd. In the analog mixed-signal IC and clocking market, we primarily compete against Renesas Electronics Corporation (through their acquisition of Integrated Device Technology, Inc.), Silicon Laboratories Inc., Texas Instruments Incorporated, Micrel, (which is owned by MCHP), and Analog Devices, Inc. In the oscillator market, we primarily compete against quartz crystal suppliers such as Rakon Limited, Daishinku Corporation, Nihon Dempa Kogyo Co., Ltd., TXC Corporation, Seiko Epson Corporation, Kyocera Corporation and Vectron International (which is owned by MCHP). We expect competition in our current markets to increase in the future as existing competitors improve or expand their product offerings and as new competitors enter these markets. In addition, our future growth will depend in part on our ability to successfully enter and compete in new markets. Some of these markets will likely be served by only a few large, multinational OEMs with substantial negotiating and buying power relative to us and, in some instances, with internally developed silicon solutions that can be competitive to our products.

Our ability to compete successfully depends, in part, on factors that are outside of our control, including industry and general economic trends. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support, government support, and other resources, are more established than we are and have significantly better brand recognition and broader product offerings. This in turn may enable them to better withstand adverse economic or market conditions, such as those caused by the current COVID-19 pandemic, in the future and significantly reduce their pricing so as to compete against us. Our ability to compete successfully will depend on a number of factors, including:

24

---

 

Our competitors may also establish cooperative relationships among themselves or with third-parties or may acquire companies that provide similar products to ours. As a result, new competitors or alliances may emerge that could capture significant market share. Any of these factors, alone or in combination with others, could harm our business, financial condition, and results of operations and result in a loss of market share and an increase in pricing pressure.

We depend on our executive officers and other key employees, and the loss of one or more of these employees or an inability to attract or retain highly skilled employees could adversely affect our business.

Our success depends largely upon the continued services of our executive officers and other key employees, including our engineering and sales and marketing personnel. From time to time, there may be changes in our executive management team or other key personnel, which could disrupt our business. We do not have employment agreements with our executive officers or other key personnel that require them to continue to work for us for any specified period and, therefore, they could terminate their employment with us at any time. The loss of one or more of our executive officers or other key employees could have an adverse effect on our business.

In addition, to execute our growth plan, we must attract and retain highly qualified personnel. Competition for these personnel in the San Francisco Bay Area, where our headquarters is located, and in other locations where we maintain offices, is intense, especially for engineers with MEMS technology and advanced clock IC design expertise. We have from time to time experienced, and we expect to continue to experience, difficulty in hiring and retaining employees with appropriate qualifications. Many of the companies with which we compete for experienced personnel have greater resources than we have. If we hire employees from competitors or other companies, their former employers may attempt to assert that these employees or we have breached legal obligations, resulting in a diversion of our time and resources. In addition, job candidates and existing employees often consider the value of the equity awards they receive in connection with their employment. If the perceived value of our equity awards declines, it may adversely affect our ability to recruit and retain highly skilled employees. Further, changes in immigration policies may negatively impact our ability to attract and retain personnel, including personnel with specialized technical expertise. If we fail to attract new personnel or fail to retain or motivate our current personnel, our business and future growth prospects could be adversely affected.

25

---

 

Our company culture has contributed to our success and if we cannot maintain this culture as we grow, our business could be harmed.

We believe that our company culture, which promotes innovation, open communication, and teamwork, has been critical to our success. We face a number of challenges that may affect our ability to sustain our corporate culture, including:

We depend on third parties for our wafer fabrication, assembly, and testing operations, which exposes us to certain risks that may harm our business.

We operate an outsourced manufacturing business model. As a result, we rely on third parties for all of our manufacturing operations, including wafer fabrication, assembly, and testing. Although we use multiple third-party supplier sources, we depend on these third parties to supply us with material of a requested quantity in a timely manner that meets our standards for yield, cost, and manufacturing quality. The manufacturing processes of our third-party suppliers for our products require specialized technology that requires certain raw materials. Except for our agreement with Bosch for MEMS wafers, we do not have any long-term supply agreements with any of our other manufacturing suppliers. These third-party manufacturers often serve customers that are larger than us or require a greater portion of their services, which may decrease our relative importance and negotiating leverage with these third parties.

If market demand for wafers or production and assembly materials increases, if a supplier of our wafers fails to procure materials needed for manufacture of our products, or if a supplier of our wafers ceases or suspends operations, our supply of wafers and other materials could become limited. We currently have a ten-year supply agreement with Bosch for the fabrication of our MEMS wafers. This agreement expires in 2027 and may be terminated with three years’ advance notice beginning in February 2024. We currently rely on Bosch for our MEMS fabrication, and TSMC for our analog circuits fabrication, and any disruption in their supply of wafers or any increases in their wafer or materials prices could adversely affect our gross margins and our ability to meet customer demands in a timely manner, or at all, and lead to reduced revenue. There is currently a number of industry-wide supply constraints affecting the supply of analog circuits manufactured by certain foundries, including TSMC, which may limit our ability to fully satisfy an increase in demand for some of our products. Moreover, wafers constitute a large portion of our product cost. If we are unable to negotiate volume discounts or otherwise purchase wafers at favorable prices and in sufficient quantities in a timely manner, our gross margins would be adversely affected.

To ensure continued wafer supply, we may be required to establish alternative wafer supply sources, which could require significant expenditures and limit our negotiating leverage. We currently rely on Bosch and TSMC as our primary foundries and suppliers for our MEMS timing devices and analog circuits, respectively, and only a few foundry vendors have the capability to manufacture our most advanced solutions, in particular with respect to our MEMS solution. If we engage alternative supply sources, we may incur additional costs and encounter difficulties and/or delays in qualifying the supply sources. For example, we have a license agreement with Bosch under which Bosch granted us a license to use certain patents. Under this agreement, we are required to pay a royalty fee to Bosch if we engage third parties to manufacture, or if we decide to manufacture ourselves, certain generations of our MEMS wafers through March 31, 2024. In addition, shipments could be significantly delayed while these sources are qualified for volume production. If we are unable to maintain our relationship with Bosch or TSMC, our ability to produce high-quality products could suffer, which in turn could harm our business, financial condition, and results of operations.

26

---

 

We currently rely on ASE, Carsem, and UTAC for assembly and testing, as well as Daishinku and UTAC for ceramic packaging for some of our products. Certain of our manufacturing, packaging, assembly, and testing facilities are located outside of the United States, including Malaysia, Taiwan, and Thailand, where we are subject to increased risk of political and economic instability, difficulties in managing operations, difficulties in enforcing contracts and our intellectual property, severe weather, and employment and labor difficulties. Additionally, public health crises, such as an outbreak of contagious diseases like the COVID-19 pandemic, may affect the production capabilities of our suppliers, including as a result of quarantines, closures of production facilities, lack of supplies, or delays caused by restrictions on travel or work-from-home orders. For example, on March 16, 2020, the government of Malaysia announced measures to restrict movement in that country in an effort to suppress the number of COVID-19 cases. The restrictions have been extended several times, currently until August 2021. These restrictions could limit our suppliers’ ability to operate their manufacturing facilities in that country.

Although we maintain business disruption insurance, this insurance may not be adequate to cover any losses we may experience as a result of such difficulties. Any of these factors could result in manufacturing and supply problems, and delays in our ability to provide our solutions to our customers on a timely basis, or at all. If we experience manufacturing problems at a particular location, we may be required to transfer manufacturing to a new location or supplier. Converting or transferring manufacturing from a primary location or supplier to a backup facility could be expensive and could take several quarters or more. During such a transition, we would be required to meet customer demand from our then-existing inventory, as well as any partially finished goods that could be modified to the required product specifications. In addition, our end customers may require requalification with a new wafer manufacturer. We typically maintain at least a six-month supply of our MEMS wafers for which Bosch is our primary supplier. We do not otherwise maintain sufficient inventory to address a lengthy transition period. As a result, we may not be able to meet customer needs during such a transition, which could damage our customer relationships.

If one or more of these vendors terminates its relationship with us, or if we encounter any problems with our manufacturing supply chain, our ability to ship our solutions to our customers on time and in the quantity required would be adversely affected, which in turn could cause an unanticipated decline in our sales and loss of customers. In addition, the inability of our customers or their contract manufacturers to obtain sufficient supplies of third-party components used with our products could result in a decline in the demand of our products and a loss of sales.

If the foundries with which we contract do not achieve satisfactory yields or quality, our reputation and customer relationships could be harmed.

We depend on satisfactory wafer foundry manufacturing capacity, wafer prices, and production yields, as well as timely wafer delivery to meet customer demand and enable us to maintain gross margins. The fabrication of our products is a complex and technically demanding process. Minor deviations in the manufacturing process can cause substantial decreases in yields and, in some cases, cause production to be suspended. Our foundry vendors may experience manufacturing defects and reduced manufacturing yields from time to time. Further, any new foundry vendors we employ may present additional and unexpected manufacturing challenges that could require significant management time and focus. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials by the foundries that we employ could result in lower than anticipated production yields or unacceptable performance of our devices. Many of these problems are difficult to detect at an early stage of the manufacturing process and may be time-consuming and expensive to correct. Poor production yields from the foundries that we employ, or defects, integration issues, or other performance problems in our solutions could significantly harm our customer relationships and financial results and give rise to financial or other damages to our customers. Any product liability claim brought against us, even if unsuccessful, would likely be time-consuming and costly to defend.

Manufacturing yields for new products initially tend to be lower as we complete product development and commence volume manufacturing, and typically increase as we bring the product to full production. Our business model includes this assumption of improving manufacturing yields and, as a result, material variances between projected and actual manufacturing yields will have a direct effect on our gross margin and profitability. The difficulty of accurately forecasting manufacturing yields and maintaining cost competitiveness through improving manufacturing yields will continue to be magnified by the increasing process complexity of manufacturing semiconductor products.

27

---

 

Raw material price fluctuations can increase the cost of our products, impact our ability to meet customer commitments, and may adversely affect our results of operations.

The cost of raw materials is a key element in the cost of our products. Our inability to offset material price inflation through increased prices to customers, suppliers, productivity actions, or through commodity hedges could adversely affect our results of operations. Many major components, product equipment items, and raw materials, are procured or subcontracted on a single or sole-source basis. Although we maintain a qualification and performance surveillance process and we believe that sources of supply for raw materials and components are generally adequate, it is difficult to predict what effects shortages or price increases may have in the future. Our inability to fill our supply needs would jeopardize our ability to fulfill obligations under our contracts, which could, in turn, result in reduced sales and profits, contract penalties or terminations, and damage to our customer relationships.

Furthermore, increases in the price of silicon wafers, testing costs, and commodities, which may result in increased production costs, mainly assembly and packaging costs, may result in a decrease in our gross margins. Moreover, our suppliers may pass the increase in raw materials and commodity costs onto us which would further reduce the gross margin of our products. In addition, as we are a fabless company, global market trends such as a shortage of capacity to fulfill our fabrication needs also may increase our raw material costs and thus decrease our gross margin.

We rely on our relationships with industry and technology leaders to enhance our product offerings and our inability to continue to develop or maintain such relationships in the future would harm our ability to remain competitive.

We develop many of our silicon timing systems products for applications in systems that are driven by industry and technology leaders in the communications and computing markets. We work with distributors, resellers, OEMs, and system manufacturers to define industry conventions and standards within our target markets. We believe that these relationships enhance our ability to achieve market acceptance and widespread adoption of our products. If we are unable to continue to develop or maintain these relationships, our silicon timing systems solutions could become less desirable to our customers, our sales could suffer and our competitive position could be harmed.

We are subject to the cyclical nature of the semiconductor industry.

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles, and wide fluctuations in product supply and demand. The industry experienced a significant downturn during past global recessions. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels, and accelerated erosion of average selling prices. Any downturns in the semiconductor industry could harm our business, financial condition, and results of operations. Furthermore, any significant upturn in the semiconductor industry could result in increased competition for access to third-party foundry and assembly capacity. We are dependent on the availability of this capacity to manufacture and assemble our products and we can provide no assurance that adequate capacity will be available to us in the future.

Our ability to receive timely payments from or the deterioration of the financial conditions of our distributors or our end customers could adversely affect our operating results.

Our ability to receive timely payments from or the deterioration of the financial condition of our distributors or our end customers could adversely impact our collection of accounts receivable, and, as a result, our revenue. We regularly review the collectability and creditworthiness of our customers to determine an appropriate allowance for credit losses. However, the extent of the COVID-19 pandemic’s impact on credit and financial markets remains uncertain, which creates uncertainty as to the financial condition of our distributors and customers. Based on our review of our customers annually, substantially all of which are large distributors, resellers, OEMs, and system manufacturers, we had a $0.1 million reserve for credit losses as of each of December 31, 2020 and 2019. If our credit losses, however, were to exceed our current or future allowance for credit losses, our business, financial condition, and results of operations would be adversely affected.

28

---

 

Our loan agreements contain certain restrictive covenants that may limit our operating flexibility.

Our loan agreements contain certain restrictive covenants that either limit our ability to, or require a mandatory prepayment in the event that we, incur indebtedness, merge with other companies or enter into or consummate certain change of control transactions, acquire other companies, make certain investments, transfer or dispose of assets, amend certain material agreements, or enter into certain other transactions. Furthermore, our future working capital, borrowings, or equity financing could be unavailable to repay or refinance any amounts outstanding under our future debt obligations. In the event of a liquidation, our existing and any future lenders would be repaid all outstanding principal and interest prior to distribution of assets to unsecured creditors, and the holders of our common stock would receive a portion of any liquidation proceeds only if all of our creditors, including any future lenders, were first repaid in full.

We may not be able to accurately predict our future capital needs, and we may not be able to obtain additional financing to fund our operations.

We may need to raise additional funds in the future. Any required additional financing may not be available on terms acceptable to us, or at all. If we raise additional funds by issuing equity securities or convertible debt, stockholders may experience significant dilution of their ownership interest, and the newly-issued securities may have rights senior to those of the holders of our common stock. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur additional interest expense. If additional financing is not available when required or is not available on acceptable terms, we may have to scale back our operations or limit our production activities, and we may not be able to expand our business, develop or enhance our solutions, take advantage of business opportunities, or respond to competitive pressures, which could negatively impact our revenue and the competitiveness of our products.

We recently repaid all of our outstanding indebtedness under our revolving line of credit and may seek, or be required to seek, alternative or additional debt financing in the immediate or near term.

On July 24, 2020 we repaid $35.0 million of outstanding indebtedness under our revolving line of credit agreement with The Bank of Tokyo-Mitsubishi UFJ, Ltd. (“MUFG”). As of December 31, 2020, we closed the $20.0 million revolving line of credit we had with Sumitomo Mitsui Banking Corporation and $30.0 revolving line of credit with MegaChips. Both of these credit facilities had no outstanding balance at the time of closing. We currently still maintain a $50.0 million revolving line of credit with MUFG. MUFG requires us to maintain a minimum cash balance in our operating cash account equal to our outstanding loan balance. We may seek, or be required to seek, additional or alternative sources of debt financing, in lieu of, or in addition to, our current facilities. Any required additional financing may not be available on terms acceptable to us, or at all. Further, we may not have the leverage to negotiate terms favorable to us under these arrangements, including with MUFG, as we are no longer a wholly-owned subsidiary of MegaChips. We do not expect MegaChips to provide guarantees of our indebtedness in the future, which may make it more difficult or expensive to borrow funds in the future. In addition, the terms of any financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur additional interest expense. If additional financing is not available when required or is not available on acceptable terms, it could harm our liquidity position and we may have to scale back our operations or limit our production activities, which in turn would harm our business, operating results, and financial condition.

A portion of our operations is located outside of the United States, which subjects us to additional risks, including increased complexity and costs of managing international operations and geopolitical instability.

We outsource the fabrication and assembly of all of our products to third parties that are primarily located in Germany and Asia. In addition, we conduct research and development activities in the United States, Japan, the Netherlands, Taiwan, and Ukraine and work with third-party contractors in Russia. We also conduct marketing and administrative functions in the United States, China, Taiwan, and Ukraine. In addition, members of our sales force are located in the United States, China, India, France, Taiwan, and Ukraine. In addition, approximately 93% of our revenue for the years ended December 31, 2020 and 2019 was from distributors with ship-to locations outside the United States,

29

---

 

although we believe the majority of our end customers are based in the U.S., based on sell-through information provided by these distributors. As a result of our international focus, we face numerous challenges and risks, including:

These risks could harm our international operations, delay new product releases, increase our operating costs, and hinder our ability to grow our operations and business and, consequently, our business, financial condition, and results of operations could suffer. For example, we rely on TSMC in Taiwan for the fabrication of our analog circuits and have sales force personnel in Taiwan. If political tensions between China and Taiwan were to increase, it could disrupt our business. In addition, if the political and military situation in Russia and Ukraine, or the relationship between Russia and the United States, significantly worsens, or if either Russia or the United States imposes significant new economic sanctions or restrictions on doing business, and we are restricted or precluded from continuing our operations in Russia or Ukraine, our costs could increase, and our product development efforts, business, financial condition, and results of operations could be significantly harmed. Further, the ongoing COVID-19 pandemic has led to travel, work-from-home and other restrictions, which has significantly impacted our domestic and international operations and the operations of our suppliers, distributors, partners, and customers. At this point, the extent to which the COVID-19 pandemic may

30

---

 

impact our business remains uncertain but it may materially adversely affect our business, financial condition or results of operations.

If significant tariffs or other restrictions are placed on Chinese imports or any related counter-measures are taken by China, our revenue and results of operations may be materially harmed.

If significant tariffs or other restrictions are placed on Chinese imports or any related counter-measures are taken by China, our revenue and results of operations may be materially and adversely affected. Between July 2018 and February 2020, the U.S. Trade Representative imposed tariffs on products from China, with current tariff rates between 7.5% and 25%. If the existing tariffs are increased, new tariffs are imposed, or there is a court or governmental agency determination that exposes additional products to the tariffs, we may be required to raise our prices on those products, which may further result in a loss of customers and harm our operating performance. The prior U.S. administration imposed new or additional tariffs on Chinese products with short notice and China imposed certain retaliatory tariffs. The current U.S. administration may further alter trade agreements and terms between China and the United States, which could further limit trade with China or impose additional tariffs on imports from China. If our products become subject to tariffs or other retaliatory trade measures, it could materially and adversely affect our business and operating results. In the event that these or future tariffs are imposed on imports of our products, or that China or other countries take retaliatory trade measures in response to existing or future tariffs, our business may be impacted and we may be required to raise prices or make changes to our operations, any of which could materially harm our revenue or operating results.

Fluctuations in exchange rates between and among the currencies of the countries in which we do business could adversely affect our results of operations.

Our sales have been historically denominated in U.S. dollars. An increase in the value of the U.S. dollar relative to the currencies of the countries in which our customers operate could impair the ability of our customers to cost-effectively purchase or integrate our solutions into their product offerings, which may materially affect the demand for our solutions and cause these customers to reduce their orders, which in turn would adversely affect our revenue and business. If we increase operations in other currencies in the future, we may experience foreign exchange gains or losses due to the volatility of other currencies compared to the U.S. dollar. Certain of our employees are located in Malaysia, the Netherlands, Taiwan, Japan, France and Ukraine, and we have consultants in Russia, India and Thailand. Accordingly, a portion of our payroll as well as certain other operating expenses are paid in currencies other than the U.S. dollar. Our results of operations are denominated in U.S. dollars, and the difference in exchange rates in one period compared to another may directly impact period-to-period comparisons of our results of operations. Furthermore, currency exchange rates have been especially volatile in the recent past, and these currency fluctuations may make it difficult for us to predict our results of operations.

Failure to comply with the laws associated with our activities outside of the United States could subject us to penalties and other adverse consequences.

We face significant risks if we fail to comply with anti-corruption laws and anti-bribery laws, including, without limitation, the U.S. Foreign Corrupt Practices Act of 1977, as amended (the “FCPA”), the U.S. Travel Act, and the UK Bribery Act 2010, that prohibit improper payments or offers of payment to foreign governments and political parties by us for the purpose of obtaining or retaining business. In many foreign countries, particularly in countries with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA or other applicable laws and regulations. Any violation of these laws could result in severe criminal or civil sanctions and, in the case of the FCPA, suspension or debarment from U.S. government contracting, which could have an adverse effect on our reputation, business, financial condition, and results of operations.

31

---

 

We are subject to government regulation, including import, export and economic sanctions laws and regulations that may expose us to liability and increase our costs.

Our products and technology are subject to U.S. export controls, including the U.S. Department of Commerce’s Export Administration Regulations (“EAR”) and economic and trade sanctions regulations administered by the U.S. Treasury Department’s Office of Foreign Assets Controls. These regulations may limit the export of our products and technology, and provision of our services outside of the United States, or may require export authorizations, including by license, a license exception, or other appropriate government authorizations and conditions, including annual or semi-annual reporting. Export control and economic sanctions laws may also include prohibitions on the sale or supply of certain of our products to embargoed or sanctioned countries, regions, governments, persons, and entities. For example, we sell to markets in Asia where multiple companies have been added to the Entity List in the last 18 months, requiring license for exports of items subject to control under the EAR. To our knowledge, we have not sold products subject to the EAR to Entity List persons. In addition, various countries regulate the importation of certain products, through import permitting and licensing requirements, and have enacted laws that could limit our ability to distribute our products. The exportation, re-exportation, and importation of our products and technology and the provision of services, including by our partners, must comply with U.S. and other laws or else we may be adversely affected through reputational harm, government investigations, penalties, and a denial or curtailment of our ability to export our products and technology. Although we take precautions to prevent our products and technology from being provided in violation of such laws, our products and technology may have previously been, and could in the future be, provided inadvertently in violation of such laws, despite the precautions we take. Changes in export or import laws or sanctions policies also may adversely impact our operations, delay the introduction and sale of our products in international markets, or, in some cases, prevent the export or import of our products and technology to certain countries, regions, governments, persons, or entities altogether, which could adversely affect our business, financial condition, and results of operations.

Changes in environmental laws or regulations, including conflict minerals rules, could impair our ability to compete in international markets.

Our product or manufacturing standards could be impacted by new or revised environmental rules and regulations or other social initiatives. For example, the SEC adopted disclosure requirements in 2012 relating to the sourcing of certain minerals from the Democratic Republic of Congo and certain other adjoining countries. These rules, which required reporting starting in 2014, could adversely affect our costs, the availability of minerals used in our products, and our relationships with customers and suppliers. Also, since our supply chain is complex, we may face reputational challenges with our customers, stockholders, and other stakeholders if we are unable to sufficiently verify the origins for any conflict minerals used in the products that we sell.

New or future changes to U.S. and non-U.S. tax laws could materially adversely affect us.

New or future changes in tax laws, regulations, and treaties, or the interpretation thereof, in addition to tax regulations enacted but not in effect, tax policy initiatives and reforms under consideration in the United States or related to the Organisation for Economic Co-operation and Development’s (“OECD”), Base Erosion and Profit Shifting Project (“BEPSP”), the European Commission’s state aid investigations, and other initiatives could have an adverse effect on the taxation of international businesses. Furthermore, countries where we are subject to taxes, including the United States, are independently evaluating their tax policy and we may see significant changes in legislation and regulations concerning taxation. Certain countries have already enacted legislation, including those related to BEPSP, which could affect international businesses, and other countries have become more aggressive in their approach to audits and enforcement of their applicable tax laws. In addition, we are unable to predict what future tax reform may be proposed or enacted or what effect such changes would have on our business, but any changes, to the extent they are brought into tax legislation, regulations, policies, or practices, could increase our effective tax rates in the countries where we have operations and have an adverse effect on our overall tax rate, along with increasing the complexity, burden and cost of tax compliance, all of which could impact our business, financial condition, and results of operations.

32

---

 

Tax regulatory authorities may disagree with our positions and conclusions regarding certain tax positions resulting in unanticipated costs or non-realization of expected benefits.

A tax authority may disagree with tax positions that we have taken. For example, the Internal Revenue Service (“IRS”), or another tax authority could challenge our allocation of income by tax jurisdiction and the amounts paid between our affiliated companies pursuant to our intercompany arrangements and transfer pricing policies, including amounts paid with respect to our intellectual property in connection with our intercompany research and development cost sharing arrangement and legal structure. A tax authority may take the position that material income tax liabilities, interest, and penalties are payable by us, in which case, we expect that we might contest such assessment. Contesting such an assessment may be lengthy and costly and if we were unsuccessful in disputing the assessment, the implications could be materially adverse to us and affect our anticipated effective tax rate or operating income, and we could be required to pay substantial penalties and interest where applicable.

State, federal, and foreign laws and regulations related to privacy, data use, and security could adversely affect us.

We are subject to state and federal laws and regulations related to privacy, data use, and security. In addition, in recent years, there has been a heightened legislative and regulatory focus on data security, including requiring consumer notification in the event of a data breach. Legislation has been introduced in Congress and there have been several Congressional hearings addressing these issues. From time to time, Congress has considered, and may do so again, legislation establishing requirements for data security and response to data breaches that, if implemented, could affect us by increasing our costs of doing business. In addition, several states have enacted privacy or security breach legislation requiring varying levels of consumer notification in the event of a security breach. For example, the California Consumer Privacy Act (“CCPA”) went into effect in January 2020 and enhances consumer protection and privacy rights by granting consumers resident in California new rights with respect to the collection of their personal data and imposing new operational requirements on businesses. The CCPA includes a statutory damages framework and private rights of action against businesses that fail to comply with certain CCPA terms or implement reasonable security procedures and practices to prevent data breaches. Several other states are considering similar legislation.

Foreign governments are raising similar privacy and data security concerns. In particular, the European Union has enacted a General Data Protection Regulation (“GDPR”), which became effective in May 2018. China, Russia, Japan, and other countries in Latin America and Asia are also strengthening their privacy laws and the enforcement of privacy and data security requirements. Complying with such laws and regulations may be time-consuming and require additional resources, and could therefore adversely affect our business, financial condition, and results of operations.

Breaches or other disruptions of our security systems may damage our reputation and adversely affect our business.

Our security systems are designed to protect our customers’, suppliers’, and employees’ confidential information, as well as maintain the physical security of our facilities. We also rely on a number of third-party cloud-based service providers of corporate infrastructure services relating to, among other things, human resources, electronic communication services, and some finance functions, and we are, of necessity, dependent on the security systems of these providers. These technologies are subject to failure, including as a result of an inability to have such technologies properly supported, updated, expanded, or integrated into other technologies. These technologies may also contain open source and third-party software which may unbeknownst to us contain defects or viruses.

Any security breaches or other unauthorized access by third parties to the systems of our cloud-based service providers or the existence of computer viruses in their data or software could expose us to a risk of information loss and misappropriation of confidential information. Accidental or willful security breaches or other unauthorized access by third parties to our information systems or facilities, or the existence of computer viruses in our data or software could expose us to a risk of information loss, misappropriation of proprietary and confidential information, as well as work stoppages or disruptions. Any theft or misuse of this information could result in, among other things, unfavorable publicity, damage to our reputation, difficulty in marketing our products, allegations by our customers that we have not performed our contractual obligations, regulatory fines or penalties, litigation by affected parties and possible financial obligations for liabilities and damages related to the theft or misuse of this information, any of which could have an adverse effect on our business, financial condition, results of operations, reputation, and relationships with our customers and suppliers. Cybersecurity threats, which include computer viruses, spyware, and malware, attempts to

33

---

 

access information, denial of service attacks, and other electronic security breaches, are persistent and evolve quickly. Such threats have increased in frequency, scope, and potential impact in recent years. Since the techniques used to obtain unauthorized access or to sabotage systems change frequently and are often not recognized until after they are launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures.

We might not be able to utilize a significant portion of our net operating loss carryforwards and research and development tax credit carryforwards.

As of December 31, 2020, we had U.S. federal and state net operating loss (“NOL”) carryforwards of approximately $201.5 million and $64.0 million, respectively, and U.S. federal and state research and development tax credit carryforwards of approximately $3.9 million and $3.6 million, respectively. The U.S. federal NOL carryforwards begin to expire in 2025 and the state NOL carryforwards begin to expire in 2028. The U.S. federal research and development tax credit carryforwards begin to expire in 2025 and the state research and development tax credit carryforwards carry forward indefinitely. These net operating loss and U.S. federal tax credit carryforwards could expire unused and/or be unavailable to offset future income tax liabilities. In addition, under Section 382 of the Internal Revenue Code of 1986, as amended (the “Code”), and corresponding provisions of California state law, if a corporation undergoes an “ownership change,” which is generally defined as a greater than 50% change, by value, in its equity ownership over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards and other pre-change tax attributes to offset its post-change income may be limited. We completed a Section 382 analysis and determined an ownership change occurred in 2014 and concluded that it had no impact on U.S. federal and California net operating losses or on U.S. federal research and development credits. Our initial public offering in November 2019 did not result in a change in ownership of greater than 50% under Section 382. We also had a follow-on offering on June 16, 2020, which resulted in greater than 50% change under Section 382. We completed an updated Section 382 analysis based on this new change event and determined that it will not prohibit us from eventually utilizing our carryforwards.  We may experience ownership changes in the future as a result of subsequent shifts in our stock ownership, some of which may be outside of our control. If we determine that an ownership change has occurred and our ability to use our historical net operating loss and tax credit carryforwards is materially limited, it would harm our future business, financial condition, and results of operations by effectively increasing our future tax obligations. In addition, under the Tax Act, federal NOLs incurred in 2018 and in future years may be carried forward indefinitely but generally may not be carried back and the deductibility of such NOLs is limited to 80% of taxable income.

Risks Related to Intellectual Property

Our failure to adequately protect our intellectual property rights could impair our ability to compete effectively or defend ourselves from litigation, which could harm our business, financial condition, and results of operations.

Our success depends, in part, on our ability to protect our intellectual property. We rely primarily on patent, copyright, trademark, and trade secret laws, as well as confidentiality and non-disclosure agreements, and other contractual protections, to protect our technologies and proprietary know-how, all of which offer only limited protection. The steps we have taken to protect our intellectual property rights may not be adequate to prevent the misappropriation, infringement, or other violation of our proprietary information or infringement of our intellectual property rights, and our ability to prevent such misappropriation, infringement, or other violation is uncertain, particularly in countries outside of the United States. As of December 31, 2020, we had 73 issued U.S. patents, expiring generally between 2026 and 2039, and 27 pending U.S. patent applications. We also had one foreign issued patent expiring in 2039 and four pending foreign patent applications. Our issued patents and pending patent applications generally relate to our MEMS fabrication process, MEMS resonators, circuits, packaging, and oscillator systems. We cannot assure you that any patents from any pending patent applications (or from any future patent applications) will be issued, and even if the pending patent applications are granted, the scope of the rights granted to us may not be meaningful or provide us with any commercial advantage. For example, these patents could be opposed, contested, circumvented, designed around by third party, be narrowed or declared invalid or unenforceable in judicial or administrative proceedings including re-examination, inter partes review, post-grant review, interference and derivation proceedings and equivalent proceedings in foreign jurisdictions, or be subject to ownership claims by third parties. The failure of our patents to adequately protect our technology might make it easier for our competitors to offer similar products or technologies. Our foreign patent protection is less comprehensive than our U.S. patent protection and may

34

---

 

not protect our intellectual property rights in some countries where our products are sold or may be sold in the future. Many U.S.-based companies have encountered substantial third-party intellectual property infringement in foreign countries, including countries where we sell products. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. If such an impermissible use of our intellectual property or trade secrets were to occur, our ability to sell our solutions at competitive prices may be adversely affected and our business, financial condition, and results of operations could be adversely affected.

The legal standards relating to the validity, enforceability, and scope of protection of intellectual property rights are uncertain and evolving. We cannot assure you that others will not develop or patent similar or superior technologies or solutions, or that our patents, trademarks, and other intellectual property will not be challenged, invalidated, or circumvented by others.

We also have a license to certain patents from Bosch relating to the design and manufacture of MEMS-based timing applications. The patent rights obtained under the license agreement expire between 2021 and 2029, and the license agreement expires upon expiration of the last patent licensed under the agreement. If we were to lose the benefit of these patents or other licensed technology used in our business, it could harm our business and our ability to compete.

We believe that the success of our business depends more on proprietary technology, information and processes, and know-how than on our patents or trademarks. Much of our proprietary information and technology related to manufacturing processes is not patented and may not be patentable.

Unauthorized copying or other misappropriation of our proprietary technologies could enable third parties to benefit from our technologies without paying us for doing so, which could harm our business. Monitoring unauthorized use of our intellectual property is difficult and costly. It is possible that unauthorized use of our intellectual property may have occurred or may occur without our knowledge. We cannot assure you that the steps we have taken will prevent unauthorized use of our intellectual property, or that others will not develop technologies similar or superior to our technology or design around our intellectual property. Our failure to effectively protect our intellectual property could reduce the value of our technology in licensing arrangements or in cross-licensing negotiations.

In addition, we also rely on contractual protections with our customers, suppliers, distributors, employees, and consultants, and we implement security measures designed to protect our trade secrets and know-how. However, we cannot assure you that we have entered into such agreements with every such party, that these contractual protections and security measures will not be breached, that we will have adequate remedies for any such breach, or that our customers, suppliers, distributors, employees, or consultants will not assert rights to intellectual property or damages arising out of such contracts.

We may in the future need to initiate infringement claims or litigation in order to try to protect or enforce our intellectual property rights. Litigation, whether we are a plaintiff or a defendant, can be expensive and time-consuming and may divert the efforts of our management and other personnel, which could harm our business, whether or not such litigation results in a determination favorable to us. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing. Additionally, any enforcement of our patents or other intellectual property may provoke third parties to assert counterclaims against us. If we are unable to meaningfully protect our proprietary rights or if third parties independently develop or gain access to our or similar technologies, our business, financial condition, results of operations, reputation, and competitive position could be harmed.

We may face intellectual property infringement, misappropriation, or other claims, which could be time-consuming and costly to defend or settle and which could result in the loss of significant rights and harm our relationships with our customers and distributors.

The semiconductor industry in which we operate is characterized by companies that hold patents and other intellectual property rights and vigorously pursue, protect, and enforce intellectual property rights. From time to time, third parties may assert against us and our customers and distributors their patent and other intellectual property rights

35

---

 

to technologies that are important to our business. For example, in March 2019, VTT Technical Research Centre of Finland, Ltd. filed suit in the United States District Court for the Northern District of California alleging infringement by us of a patent. While the District Court ruled in our favor, VTT has filed an appeal with the U.S. Court of Appeals for the Federal Circuit. We have not accrued for a loss contingency relating to this matter. Any litigation, regardless of success or merit, could cause us to incur substantial expenses, reduce our sales, and divert the efforts of our management and other personnel. In the event we receive an adverse result in any litigation, we could be required to pay substantial damages, seek licenses from third parties, which may not be available on reasonable terms or at all, cease sale of products, expend significant resources to develop alternative technology, or discontinue the use of processes requiring the relevant technology. For more information regarding this matter, see “Business – Legal Proceedings.”

In addition, our commercial success depends upon our ability to manufacture and sell our products without infringing, misappropriating, or otherwise violating the intellectual property rights of others. Claims that our products, processes, or technology infringe, misappropriate, or otherwise violate third-party intellectual property rights, regardless of their merit or resolution, could be costly to defend or settle and could divert the efforts and attention of our management and other personnel. We may in the future, particularly as a public company with an increased profile and visibility, receive communications from others alleging our infringement, misappropriation, or other violation of patents, trade secrets, or other intellectual property rights. We cannot assure you that, if made, these claims will not be successful, and lawsuits resulting from such allegations, even if we believe they are invalid, could subject us to significant liability for damages, invalidate our proprietary rights, and prevent us from selling specific products. Moreover, there could be public announcements of the results of hearings, motions, or other interim proceedings or developments and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock.

Intellectual property claims could also harm our relationships with our customers or distributors and might deter future customers from doing business with us. We do not know whether we will prevail in any such proceedings given the complex technical issues and inherent uncertainties in intellectual property litigation. If any future proceedings result in an adverse outcome, we could be required to:

Any potential dispute involving patents or other intellectual property could affect our customers, which could trigger our indemnification obligations to them and result in substantial expense to us.

In any potential dispute involving patents or other intellectual property, our customers could also become the target of litigation. Our agreements with customers and other third-parties generally include indemnification or other provisions under which we agree to indemnify or otherwise be liable to them for losses suffered or incurred as a result of claims of intellectual property infringement, damages caused by us to property or persons, or other liabilities relating to or arising from our solutions included in their products. Large indemnity payments or damage claims from

36

---

 

contractual breach could harm our business, financial condition, and results of operations. From time to time, customers require us to indemnify or otherwise be liable to them for breach of confidentiality or failure to implement adequate security measures with respect to their intellectual property and trade secrets. Although we normally contractually limit our liability with respect to such obligations, we may still incur substantial liability related to them. Any litigation against our customers could trigger technical support and indemnification obligations under some of our agreements, which could result in substantial expense to us.

In addition, other customers, or end customers with whom we do not have formal agreements requiring us to indemnify them may ask us to indemnify them if a claim is made as a condition to awarding future design wins to us. Because some of our customers are larger than we are and have greater resources than we do, they may be more likely to be the target of an infringement claim by third parties than we would be, which could increase our chances of becoming involved in a future lawsuit. If any such claims were to succeed, we might be forced to pay damages on behalf of our customers that could increase our expenses, disrupt our ability to sell our solutions and reduce our revenue. Any dispute with a customer with respect to such obligations could have adverse effects on our relationship with that customer and other current and prospective customers and reduce demand for our solutions. In addition to the time and expense required for us to supply support or indemnification to our customers, any such litigation could severely disrupt or shut down the business of our customers, which in turn could hurt our relations with our customers and cause the sale of our products to decrease. Any of the foregoing could harm our business, financial condition, and results of operations.

Risks Related to MegaChips Corporation’s Ownership Position in Our Common Stock

As long as MegaChips holds a significant amount of our stock, our other shareholders’ ability to influence matters requiring stockholder approval will be limited.

MegaChips owns 7,500,000 shares of our common stock, representing approximately 43.7% of our outstanding common stock as of December 31, 2020. For so long as MegaChips or its successors in interest, continue to hold the largest ownership position in our outstanding common stock, we expect MegaChips to continue to hold at least one out of seven seats on our board of directors, to be able to elect members of our board of directors, and could replace our entire board of directors. As long as MegaChips continues to be our largest stockholder, it will continue to have significant influence over us.

For example, as long as MegaChips continues to hold a significant or the largest ownership position in our outstanding common stock, MegaChips may have the ability to control or otherwise affect the outcome of any stockholder vote during this period. As a result, MegaChips will have the ability to exert significant influence over many matters affecting us, either through its board representative or as a stockholder, including:

MegaChips’ voting control may discourage transactions involving a change of control of us, including transactions in which other holders of our common stock might otherwise receive a premium for their shares over the then current market price. In addition, as a result of this voting control and representation on our board of directors, persons who we would like to invite to join our board of directors may decline to do so.

37

---

 

Our inability to resolve any disputes that arise between us and MegaChips with respect to our past and ongoing relationships may adversely affect our operating results.

Disputes may arise between MegaChips and us in a number of areas relating to our past and ongoing relationships, including:

We may not be able to resolve any potential conflicts, and even if we do, the resolution may be less favorable than if we were dealing with an unaffiliated party.

We have entered into a distribution agreement with MegaChips under which MegaChips has the exclusive right to promote, market, and sell our products in Japan as the exclusive distributor. We also have an integration and purchase agreement with MegaChips for the sale of resonators by us to MegaChips. The agreements we entered into with MegaChips may be amended upon agreement between the parties. Because MegaChips is a major stockholder with representatives on our board of directors, we may not have the leverage to negotiate amendments to these agreements on terms as favorable to us compared to those we would negotiate with an unaffiliated third party.

There could be potential conflicts of interest between us and affiliates of MegaChips, which could impact our business and operating results.

Some of our employees, directors and executive officers own MegaChips’ common stock and restricted stock units. In addition, some of our directors have or had affiliations with MegaChips. Ownership of MegaChips securities by our directors and officers and affiliations of directors with MegaChips could create, or appear to create, conflicts of interest with respect to matters involving both us and MegaChips. For example, corporate opportunities may arise that concern both of our businesses, such as the potential acquisition of a particular business or technology that is complementary to both of our businesses. Our Board has adopted a Related Persons Transactions Policy to address actual or perceived conflicts of interest of directors, officers and greater than 5% stockholders on a case-by-case basis. If any corporate opportunity arises and if our directors and officers do not pursue it on our behalf, we may not become aware of, and may potentially lose, a significant business opportunity.

Risks Related to Our Common Stock

Substantial future sales of our common stock could cause the market price of our common stock to decline.

The market price of our common stock could decline as a result of substantial sales of our common stock, particularly sales by our directors, executive officers, and significant stockholders, including MegaChips, or the perception in the market that holders of a large number of shares intend to sell their shares.  

38

---

 

Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us more difficult, limit attempts by our stockholders to replace or remove our current management and limit the market price of our common stock.

Provisions in our certificate of incorporation and bylaws may have the effect of delaying or preventing a change of control or changes in our management. Our amended and restated certificate of incorporation and bylaws include provisions that:

These provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors, which is responsible for appointing the members of our management. In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which generally prohibits a Delaware corporation from engaging in any of a broad range of business combinations with any interested stockholder for a period of three years following the date on which the stockholder became an interested stockholder. Any delay or prevention of a change of control transaction or changes in our management could cause our stock price to decline.

Our bylaws designate the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, and federal district courts will be the sole and exclusive forum for Securities Act claims, which could limit our stockholders’ ability to obtain what they believe to be a favorable judicial forum for disputes with us or our directors, officers, or other employees.

Our bylaws provide that, unless we consent in writing to the selection of an alternative forum, to the fullest extent permitted by law, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (a) any derivative action or proceeding brought on our behalf, (b) any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers, or other employees to us or our stockholders, (c) any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law, our certificate of incorporation or our bylaws, or (d) any action asserting a claim against us governed by the internal affairs doctrine. Section 27 of the Securities Exchange Act of 1934, or the Exchange Act, creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. As a result, the exclusive forum provision will not apply to suits brought to enforce any duty or liability created by the Exchange Act or any other claim for which the federal courts have exclusive jurisdiction. Our bylaws further provide that, unless we consent in writing to the selection of an alternative forum, the federal district courts are the sole and exclusive forum for the resolution of any complaint asserting a cause of action arising under the Securities Act.

39

---

 

Any person or entity purchasing or otherwise acquiring any interest in our capital stock shall be deemed to have notice of and consented to the provisions of our bylaws described above. This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers, or other employees, which may discourage such lawsuits against us and our directors, officers, or other employees. Alternatively, if a court were to find these provisions of our bylaws inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition, and results of operations and result in a diversion of the time and resources of our management and board of directors.

General Risk Factors

In preparing our consolidated financial statements, we make good faith estimates and judgments that may change or turn out to be erroneous, which could adversely affect our operating results for the periods in which we revise our estimates or judgments.

In preparing our consolidated financial statements in conformity with generally accepted accounting principles in the United States (“GAAP”), we must make estimates and judgments in applying our most critical accounting policies. Those estimates and judgments have a significant impact on the results we report in our consolidated financial statements. The most difficult estimates and subjective judgments that we make relate to revenue recognition, inventories, internally developed software capitalization, and income taxes. We base our estimates on historical experience, input from outside experts and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. We also have other key accounting policies that are not as subjective, and therefore, their application would not require us to make estimates or judgments that are as difficult, but which nevertheless could significantly affect our financial reporting. Actual results may differ materially from these estimates. If these estimates, judgments, or their related assumptions change, our operating results for the periods in which we revise our estimates, judgments, or assumptions could be adversely and perhaps materially affected.

Changes to financial accounting standards may affect our results of operations and could cause us to change our business practices.

We prepare our consolidated financial statements in accordance with GAAP. These accounting principles are subject to interpretation by the Financial Accounting Standards Board, the SEC, and various bodies formed to interpret and create accounting rules and regulations. Changes in accounting rules can have a significant effect on our reported financial results and may affect our reporting of transactions completed before a change is announced. Changes to those rules or the questioning of current practices may adversely affect our financial results or the way we conduct our business.

We may make acquisitions in the future that could disrupt our business, cause dilution to our stockholders, reduce our financial resources, and harm our business.

In the future, we may acquire other businesses, products, or technologies. Our ability to make acquisitions and successfully integrate personnel, technologies, or operations of any acquired business is unproven. If we complete acquisitions, we may not achieve the combined revenue, cost synergies, or other benefits from the acquisition that we anticipate, strengthen our competitive position, or achieve our other goals in a timely manner, or at all, and these acquisitions may be viewed negatively by our customers, financial markets, or investors. In addition, any acquisitions we make may create difficulties in integrating personnel, technologies, and operations from the acquired businesses and in retaining and motivating key personnel. Acquisitions may disrupt our ongoing operations, divert management from their primary responsibilities, subject us to additional liabilities, increase our expenses, and adversely impact our business, financial condition, and results of operations. Acquisitions may also reduce our cash available for operations and other uses, and could result in an increase in amortization expense related to identifiable assets acquired, potentially dilutive issuances of equity securities, or the incurrence of debt, any of which could harm our business, financial condition, and results of operations.

40

---

 

Catastrophic events may disrupt our business.

Our corporate headquarters and some of our suppliers and foundry vendors are located in areas that are in active earthquake zones or are subject to power outages, natural disasters, political, social, or economic unrest, and other potentially catastrophic events. In the event of a major earthquake, hurricane, flooding, or other catastrophic event such as fire, power loss, telecommunications failure, cyber-attack, war, terrorist attack, political, social, or economic unrest, or disease outbreak, such as the current COVID-19 pandemic, we may be unable to continue our operations and may endure system interruptions, reputational harm, delays in our product development, breaches of data security, or loss of critical data, any of which could have an adverse effect on our business and future results of operations.

Our stock price may be volatile and may decline, resulting in a loss of some or all of our stockholder investment.

The trading price and volume of our common stock is likely to be volatile and could fluctuate significantly in response to numerous factors, many of which are beyond our control, including:

In addition, the market for technology stocks and the stock markets in general have experienced extreme price and volume fluctuations. Stock prices of many technology companies have fluctuated in a manner unrelated or disproportionate to the operating performance of those companies. In the past, stockholders have instituted securities class action litigation following periods of market volatility. If we were to become involved in securities litigation, it could subject us to substantial costs, divert resources and the attention of management from our business and adversely affect our business, financial condition, and results of operations.

41

---

 

If securities analysts or industry analysts downgrade our common stock, publish negative research or reports, or fail to publish reports about our business, our stock price and trading volume could decline.

The market price and trading market for our common stock will be influenced by the research and reports that industry or securities analysts publish about us, our business, and our market. If one or more analysts adversely change their recommendation regarding our stock or change their recommendation about our competitors’ stock, our stock price would likely decline. If one or more analysts cease coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets which in turn could cause our stock price or trading volume to decline. In addition, if our operating results fail to meet the expectations created by securities analysts’ reports, our stock price could decline.

We do not intend to pay dividends on our common stock so any returns will be limited to changes in the value of our common stock.

We have never declared or paid any cash dividends on our common stock. We currently anticipate that we will retain future earnings for the development, operation, and expansion of our business and do not anticipate declaring or paying any cash dividends for the foreseeable future. Although our existing loan agreements do not contain restrictions on our ability to pay dividends or make distributions, we may in the future amend our existing loan agreements or enter into agreements that contain such restrictions. Any return to stockholders will therefore be limited to the increase, if any, in our stock price, which may never occur.

Our actual operating results may not meet our guidance and expectations, which would likely cause our stock price to decline.

From time to time, we may release guidance in our earnings releases, earnings conference calls, or otherwise, regarding our future performance that represent our management’s estimates as of the date of release. If given, this guidance, which will include forward-looking statements, will be based on projections prepared by our management. Projections are based upon a number of assumptions and estimates that, while presented with numerical specificity, are inherently subject to significant business, economic, and competitive uncertainties and contingencies, many of which are beyond our control, such as the uncertainty around the impact of the COVID-19 pandemic. The principal reason that we expect to release guidance is to provide a basis for our management to discuss our business outlook with analysts and stockholders. With or without our guidance, analysts, and other third parties may publish expectations regarding our business, financial condition, and results of operations. We do not accept any responsibility for any projections or reports published by any such third parties. Guidance is necessarily speculative in nature, and it can be expected that some or all of the assumptions of the guidance furnished by us will not materialize or will vary significantly from actual results. If our actual performance does not meet or exceed our guidance or expectations, the trading price of our common stock is likely to decline.

We incur increased costs and demands on management as a result of compliance with laws and regulations applicable to public companies, which could harm our operating results.

As a public company we incur significant legal, accounting, and other expenses, including costs associated with public company reporting requirements. Our management team and other personnel have and will continue to devote a substantial amount of time complying with these public company reporting requirements.

We intend to hire additional accounting and finance personnel with system implementation experience and expertise regarding compliance with the Sarbanes-Oxley Act. We may be unable to locate and hire qualified professionals with requisite technical and public company experience when and as needed. In addition, new employees will require time and training to learn our business and operating processes and procedures. If we are unable to recruit and retain additional finance personnel or if our finance and accounting team is unable for any reason to respond adequately to the increased demands that will result from being a public company, the quality and timeliness of our financial reporting may suffer, which could result in the identification of material weaknesses in our internal controls. Any consequences resulting from inaccuracies or delays in our reported financial statements could cause our stock price to decline and could harm our business, financial condition, and results of operations.

42

---

 

If we fail to strengthen our financial reporting systems, infrastructure, and internal control over financial reporting to meet the demands required as a public company, including the requirements of the Sarbanes-Oxley Act, we may be unable to report our financial results timely and accurately or prevent fraud. We expect to incur significant expense and devote substantial management effort toward ensuring compliance with Section 404 of the Sarbanes-Oxley Act (“Section 404”).

As a public company, we are subject to additional regulatory compliance requirements, including Section 404, and if we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud.

Rules and regulations such as the Sarbanes-Oxley Act have increased our legal and finance compliance costs and made some activities more time-consuming and costly. For example, Section 404 requires that our management report on, and our independent auditors attest to, the effectiveness of our internal control structure and procedures for financial reporting. However, our auditors will not be required to formally attest to the effectiveness of our internal control over financial reporting pursuant to Section 404 until we are no longer an “emerging growth company,” as defined in the JOBS Act. Effective internal controls are necessary for us to provide reliable financial reports and effectively prevent fraud. Section 404 compliance may divert internal resources and will take a significant amount of time and effort to complete. We may not be able to successfully complete the procedures and certification and attestation requirements of Section 404 by the time we will be required to do so. Implementing these changes may take a significant amount of time and may require specific compliance training of our personnel. In the future, we may discover areas of our internal controls that need improvement. If our auditors or we discover a material weakness or significant deficiency, the disclosure of that fact, even if quickly remedied, could reduce the market’s confidence in our consolidated financial statements and harm our stock price. Any inability to provide reliable financial reports or prevent fraud would harm our business. We may not be able to effectively and timely implement necessary control changes and employee training to ensure continued compliance with the Sarbanes-Oxley Act and other regulatory and reporting requirements. If we fail to successfully complete the procedures and certification and attestation requirements of Section 404, or if in the future our Chief Executive Officer, Chief Financial Officer or independent registered public accounting firm determines that our internal controls over financial reporting are not effective as defined under Section 404, we could be subject to investigations or sanctions by Nasdaq, the SEC or other regulatory authorities. Furthermore, perceptions of the company may suffer, and this could cause a decline in the market price of our shares of common stock. We cannot assure you that we will be able to fully comply with the requirements of the Sarbanes-Oxley Act or that management or, when applicable, our auditors will conclude that our internal controls are effective in future periods. Irrespective of compliance with Section 404, any failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation.

We are an emerging growth company, and any decision on our part to comply only with certain reduced reporting and disclosure requirements applicable to emerging growth companies could make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act. We intend to take advantage of certain exemptions under the JOBS Act from various public company reporting requirements, including not being required to have our internal control over financial reporting audited by our independent registered public accounting firm pursuant to Section 404(b) of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and any golden parachute payments not previously approved. We may take advantage of these exemptions for up to five years or until we are no longer an “emerging growth company,” whichever is earlier.

In addition, Section 107 of the JOBS Act also provides that an emerging growth company can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act for complying with new or revised accounting standards. An emerging growth company can therefore delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. However, we are choosing to “opt out” of such extended transition period, and, as a result, we will comply with new or revised accounting standards on the relevant dates on which adoption of such standards is required for non-emerging growth companies. Section 107 of the JOBS

43

---

 

Act provides that our decision to opt out of the extended transition period for complying with new or revised accounting standards is irrevocable.

We cannot predict if investors will find our common stock less attractive if we choose to rely on any of the exemptions afforded to emerging growth companies. If some investors find our common stock less attractive because we rely on any of these exemptions, there may be a less active trading market for our common stock and the market price of our common stock may be more.

Item 1B. Unresolved Staff Comments.

None

Item 2. Properties.

Our principal executive offices are located in a leased facility in Santa Clara, California, consisting of approximately 50,400 square feet of office space under lease that expires in December 2026. This facility accommodates our principal engineering, sales, marketing, operations, finance, and administrative activities. We also lease offices in Michigan, Japan, Malaysia, the Netherlands, and Ukraine. We do not own any real property. We believe that our leased facilities are adequate to meet our current needs and that additional facilities will be available on commercially reasonable terms for lease to meet future needs.

Item 3. Legal Proceedings.

In March 2019, VTT Technical Research Centre of Finland, Ltd. ("VTT") filed suit in the United States District Court for the Northern District of California alleging infringement by us of a patent relating to specific combinations of features set forth in U.S. Patent No. 8,558,643. The complaint sought unspecified monetary damages and injunctive relief. On January 22, 2020, we participated in a mediation that had been ordered by the Court.  The case was not resolved at the mediation. A Markman Hearing was held on May 15, 2020 relating to a number of different disputed claim terms, and on July 9, 2020 the Court issued a Markman Order relating to those disputed claim terms.  Among its determinations, the Court found that one of the disputed claim terms was indefinite, as well as any claim that had this claim term in it.  On July 17, 2020, the Court issued a judgment finding all claims of U.S. Patent No. 8,558,643 invalid, based upon its Markman Order.  VTT filed a Notice of Appeal of the Court's judgment with the US Court of Appeals for the Federal Circuit and filed its opening brief on November 19, 2020 and we filed our response brief on January 28, 2021. We have not accrued for a loss contingency relating to such matter as the potential loss is currently not probable and reasonably estimable.

From time to time, we may become involved in additional legal proceedings arising in the ordinary course of our business. We are not currently a party to any legal proceedings the outcome of which, if determined adversely to us, would individually or in the aggregate have a material adverse effect on our business, financial condition, and results of operations.

Item 4. Mine Safety Disclosures.

Not applicable

44

---

 

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information for Common Stock

Our common stock has been quoted on the Nasdaq Global Market under the symbol “SITM” since our initial public offering in November 2019. Prior to that time, there was no public market for our common stock.

As of February 10, 2020, there were 12 holders of record (not including beneficial holders of stock held in street names) of our common stock.

Dividend Policy

We have never paid any cash dividends on our common stock. Our board of directors currently intends to retain any future earnings to support operations, repayment of debt and to finance the growth and development of our business and does not intend to pay cash dividends on our common stock for the foreseeable future. Any future determination related to our dividend policy will be made at the discretion of our board.

Stock Performance Graph

The following information shall not be deemed to be soliciting material or to be filed with the SEC, or subject to Regulations 14A or 14C under the Exchange Act or to the liabilities of Section 18 of the Exchange Act nor shall such information be incorporated by reference into any future filing under the Securities Act or the Exchange Act, except to the extent that we specifically incorporate it by reference into such filing.

45

---

 

The following line graph compares for the period beginning November 21, 2019, the initial trading date of our common stock on the Nasdaq Global Market, and ending on December 31, 2020, the last day of our fiscal year, the cumulative total stockholder return for our common stock, the Nasdaq Composite Index and Philadelphia Semiconductor Index and assumes reinvestment of any dividends.  The stockholder return shown in the graph below is not necessarily indicative of, nor is it intended to forecast, the potential future performance of our common stock, and we do not make or endorse any predictions as to future stockholder returns.

 

 

 

46

---

 

Use of Proceeds

 

In November 2019, we closed our initial public offering, in which we registered, offered and sold 4,945,000 shares of common stock at a price to the public of $13.00 per share for gross proceeds of $64.3 million, including shares sold in connection with the exercise of the underwriters’ option to purchase additional shares. The offer and sale of all of the shares in the initial public offering (“IPO”) were registered under the Securities Act pursuant to a registration statement on Form S-1 (File No. 333-234305), which was declared effective by the SEC on November 20, 2019. We raised aggregate net proceeds of $56.4 million from the IPO, after underwriting discounts and commissions and payments of offering costs of approximately $7.9 million. We used  $41.0 million of the net proceeds for repayment of indebtedness, $7.8 million on capital expenditures and the remaining $7.6 million on research and product development activities.

 

The lead book-running managers of the IPO were Barclays Capital Inc. and Stifel, Nicolaus & Company, Incorporated. Needham & Company, LLC, Raymond James and Associates, Inc. and Roth Capital Partners, LLC acted as co-managers for the IPO. No payments were made by us to directors, officers or persons owning ten percent or more of our common stock or to their associates, or to our affiliates, other than payments in the ordinary course of business to officers for salaries and to non-employee directors pursuant to our director compensation policy. The offering commenced on November 20, 2019 and did not terminate before all securities registered in the registration statement were sold.

47

---

 

Item 6. Selected Financial Data.

The following selected consolidated financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes thereto included elsewhere in this Annual Report on Form 10-K.

 

 

48

---

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The Management’s Discussion and Analysis of Financial Condition and Results of Operations (“MD&A”) should be read in conjunction with the financial statements and the notes thereto included elsewhere in this Annual Report on Form 10-K. The MD&A contains forward-looking statements within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act that involve risks and uncertainties, which are discussed under Item 1A.

Overview

We are a leading provider of silicon timing solutions. Our timing solutions are the heartbeat of our customers’ electronic systems, solve complex timing problems and enable industry-leading products. We provide solutions that are differentiated by high performance and reliability, programmability, small size, and low power consumption. Our products have been designed into over 250 applications across our target markets, including communications and enterprise, automotive, industrial, aerospace, and mobile, IoT and consumer.

We commenced commercial shipments of our first oscillator products in 2006. Substantially all of our revenue to date has been derived from sales of oscillator systems across our target end markets. We recently introduced products into the clock IC market, which we began sampling in 2019, and intend to focus on clock IC and timing sync solutions in the future. We seek to aggressively expand our presence in these two markets.

We sell our products primarily through distributors and resellers, who in turn sell to our end customers. Based on sell-through information provided by these distributors, we believe the majority of our end customers are based in the U.S.

We operate a fabless business model, allowing us to focus on the design, sales, and marketing of our products, quickly scale production, and significantly reduce our capital expenditures. We leverage our global network of distributors and resellers to address the broad set of end markets we serve. For our largest accounts, dedicated sales personnel work with the end customer to ensure that our solutions fully address the end customer’s timing needs. Our smaller customers work directly with our distributors to select the optimum timing solution for their needs.

We were acquired by MegaChips in 2014 and were a wholly-owned subsidiary of MegaChips, a fabless semiconductor company based in Japan and traded on the Tokyo Stock Exchange, until November 25, 2019. On November 25, 2019, we completed the initial public offering of shares of our common stock. On June 16, 2020, we completed a follow-on public offering, in which we issued and sold 1,525,000 shares of our common stock and MegaChips sold 2,500,000 shares of our common stock held by them. MegaChips continues to be our largest stockholder and held approximately 43.7% of our common stock as of December 31, 2020.

We are currently experiencing a growth in demand for some of our products, however, there are a number of industry-wide supply constraints affecting the supply of analog circuits manufactured by certain foundries, including Taiwan Semiconductor Manufacturing Company, which may limit our ability to fully satisfy the increase in demand. If we cannot ship our products to our customers on time and in the quantity required as a result of this supply constraint our sales could decline and we could lose customers.

Impact of COVID-19 on our Business

The COVID pandemic has had an adverse impact on our business, and the future impact of the ongoing COVID-19 pandemic on our business remains unknown. In an effort to protect the health and safety of our employees, we took proactive actions and adopted social distancing policies at our locations around the world, including requiring employees to work from home (“WFH”), reducing the number of people in our sites at any one time, and suspending employee travel. In an effort to contain the COVID-19 pandemic or slow its spread, governments around the world have also enacted various measures, including orders to close all businesses not deemed “essential,” isolate residents in their homes or places of residence, and practice social distancing when engaging in essential activities. In addition, the United States and other countries in which we operate have imposed measures such as quarantines and “shelter-in-place” orders that are restricting business operations and travel and requiring individuals to WFH, which has impacted all aspects of our business, as well as those of the third-parties we rely upon for our manufacturing, assembly, testing, shipping and other operations.

49

---

 

We anticipate the global health crisis caused by the COVID-19 pandemic will continue to negatively impact business activity across the globe and will continue to impact our business, employees and operations for the foreseeable future. We believe that the COVID-19 pandemic could cause delay and disruption in the manufacture, shipment, and sales of, and overall demand for, our products. In addition, we believe the production capabilities of our suppliers has been, and may continue to be, impacted as a result of quarantines, closures of production facilities, lack of supplies, or delays caused by restrictions on travel or WFH orders. For example, on March 16, 2020, the government of Malaysia announced measures to restrict movement in that country to suppress the number of COVID-19 cases. The restrictions have been extended currently until August 2021. These restrictions could limit our suppliers’ ability to operate their manufacturing facilities in that country. Any delay or disruption in the manufacture, shipment and sales of, or overall demand for, our products in turn may negatively and materially impact our operating and financial results, including revenue, gross margins, operating margins, cash flows and other operating results. Further, the resumption of normal business operations after such disruptions may be delayed and a resurgence of COVID-19 could result in continued disruption to us, our suppliers, and/or our customers. To date, we have experienced minimal impact from any supplier disruption. The duration and full magnitude of the COVID-19 pandemic’s impact on credit and financial markets is also unknown, which creates uncertainty as to the financial condition of our distributors or customers. In addition, the deterioration in credit markets could limit our ability to obtain external financing to fund our operations and capital expenditures. We may also experience losses on our holdings of cash and investments due to failures of financial institutions and other parties.

We currently have employees, third-party contractors, distributors, and customers in numerous countries throughout the world that have each been impacted by the COVID-19 pandemic. The COVID-19 pandemic has restricted and is expected to continue to restrict travel and use of our facilities and the facilities of our suppliers, customers, or other vendors in our supply chain, which could impact our business, interactions and relationships with our customers, third-party suppliers and contractors, and results of operations. We cannot predict with certainty what other impacts the COVID-19 pandemic may have on our business, employees, service providers, customers and results of operations.

There remains a high degree of uncertainty in the global business environment given the impact of the COVID-19 pandemic which creates challenges with visibility beyond the near term.  We will continue to actively monitor the situation and may take further actions altering our business operations that we determine are in the best interests of our employees, customers, partners, suppliers, and stakeholders, or as required by federal, state, or local authorities. It is not clear what the potential effects any such alterations or modifications may have on our business, including the effects on our customers, employees, operations, and prospects, or on our financial results for fiscal 2021 or beyond. For additional discussion, please see Part I, Item 1A Risk Factors of this report.

Key Factors Affecting Our Performance

Customer Orders and Forecasts

Because our sales are made pursuant to standard purchase orders, orders may be cancelled, reduced, or rescheduled with little or no notice and without penalty. Cancellations of orders could result in the loss of anticipated sales without allowing us sufficient time to reduce our inventory and operating expenses. In addition, changes in forecasts or the timing of orders from customers exposes us to the risks of inventory shortages or excess inventory. We may not be able to fulfill increased demand, at least in the short term, as we do not intend to acquire excess inventory to pre-build custom products.

Design Wins with New and Existing Customers

Our solutions enable our customers to differentiate their product offerings and position themselves to gain market share. We work closely with our customers to understand their product roadmaps and strategies. Our end customers continuously develop new products in existing and new application areas. We also consider design wins critical to our future success and anticipate being increasingly dependent on revenue from new design wins for our new higher-end products with higher average selling prices (“ASPs”). The selection process is typically lengthy and may require us to incur significant design and development expenditures in pursuit of a design win with no assurance that our solutions will be selected. As a result, the loss of any key design win or any significant delay in the ramp of volume production of the customer’s products into which our product is designed could adversely affect our business.

50

---

 

Customer Demand and Product Life Cycles

Once customers design our silicon timing systems solutions into their products, we closely monitor all aspects of their demand cycle, including the initial design phase, prototype production, volume production, and inventories, as well as end-market demand, including seasonality, cyclicality, and the competitive landscape. Given our customer relationships and the long-term aspects of our solutions, we benefit from visibility into customer demand. This in turn provides an opportunity for us to monitor and refine our business fundamentals.

Product Adoption within New Markets and Applications

As we evaluate new market opportunities and bring new products to market, we pay particular attention to forecasts by industry analysts and the adoption curve of technology. We also analyze in detail potential competing forces that could hinder such adoption. If we fail to anticipate or respond to technological shifts or market demands, or to timely develop new or enhanced products or technologies in response to the same, it could result in decreased revenue and the loss of our design wins to our competitors.

Pricing, Product Cost, and Product Mix

The ASPs of our products vary significantly. While the ASP of any individual product generally decreases over time, our average ASPs have remained relatively flat as we continue to introduce new higher-end products with higher ASPs. Our pricing and margins depend on the volumes and the features of the timing devices we provide to our customers. We continually monitor and work to reduce the cost of our products and improve the potential value our solutions provide to our customers as we target new design win opportunities and manage the product life cycles of our existing customer designs. Since we rely on third-party wafer foundries and assembly and test contractors to manufacture, assemble, and test our products, we maintain a close relationship with our suppliers to improve quality, increase yields, and lower manufacturing costs.

Gross margin, or gross profit as a percentage of revenue, has been, and will continue to be, affected by a variety of factors, including ASPs, and product mix in a given period, material costs, yields, inventory write-downs and manufacturing operations costs. We believe the primary driver of gross margin is the ASPs negotiated between us and our customers relative to material costs and yield improvement. As our products mature and unit volumes increase, we expect their ASPs to decline. These declines often coincide with improvements in manufacturing yields and lower wafer, assembly, and testing costs, which offset some or all of the margin reduction that results from lower ASPs. However, we expect our gross margin to fluctuate on a quarterly basis as a result of changes in ASPs due to new product introductions, existing product transitions into high-volume manufacturing, manufacturing costs, and our product mix.

Cyclical Nature of the Semiconductor Industry

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles, and wide fluctuations in product supply and demand. Downturns in the semiconductor industry have been characterized by diminished product demand, production overcapacity, high inventory levels, and accelerated erosion of average selling prices. Any prolonged or significant downturn in the semiconductor industry generally could adversely affect our business and reduce demand for our products and otherwise harm our business, financial condition and results of operations.

51

---

 

Results of Operations

The following table summarizes our results of operations for the periods presented. 

 

 

Revenue

We derive revenue primarily from sales of silicon timing products to distributors and resellers who in turn sell to our end customers. We also sell products directly to end customers who integrate our products into their applications. Our sales are made pursuant to standard purchase orders which may be cancelled, reduced, or rescheduled, with little or no notice. We recognize product revenue upon shipment when we satisfy our performance obligations as evidenced by the transfer of control of our products to customers. We measure revenue based on the amount of consideration we expect to be entitled to in exchange for products.

 

 

Revenue increased by $32.1 million, or 38%, for 2020 compared to 2019. The increase was primarily related to 27% higher sales volume year over year and an increase in average selling price of our products of $0.02. The increase in sales volume was driven by higher demand for our products from new and existing customers, including new design wins at our existing customers.

52

---

 

Cost of Revenue, Gross Profit, and Gross Margin

Cost of revenue consists of wafers acquired from third-party foundries, assembly, packaging, and test cost of our products paid to third-party contract manufacturers, and personnel and other costs associated with our manufacturing operations. Cost of revenue also includes depreciation of production equipment, inventory write-downs, amortization of internally developed software, shipping and handling costs, and allocation of overhead and facility costs. We also include credits for rebates received from foundries to cost of revenue.

 

 

Gross profit increased by $18.4 million in the year ended December 31, 2020 compared to the same period in 2019. The gross profit for the year ended 2019 included a benefit of $2.5 million from the sale of previously reserved inventory.  Gross profit excluding this benefit of $2.5 million increased a net $20.9 million year over year mainly from higher sales volume and an increase in ASPs which were offset in part by higher other manufacturing and overhead costs of $2.1 million.

Gross margin was higher by 3% in the year ended December 31, 2020 compared to the same period in 2019. The gross margin for the year ended 2019 included a benefit of 3% or $2.5 million from sale of previously reserved inventory.  The gross margin excluding the benefit to the gross margin from the sale of the previously reserved inventory increased by 6% year over year from higher sales volume and an increase in ASPs offset in part by higher other manufacturing costs.

Operating Expenses

Our operating expenses consist of research and development, sales and marketing, and general and administrative expenses. Personnel costs are the most significant component of our operating expenses and consist of salaries, benefits, bonuses, stock-based compensation, and commissions. Our operating expenses also include consulting costs, allocated costs of facilities, information technology, and depreciation.

 

Research and Development

Our research and development efforts are focused on the design and development of next-generation silicon timing systems solutions. Our research and development expense consists primarily of personnel costs, which include stock-based compensation, pre-production engineering mask costs, software license and intellectual property expenses, design tools and prototype-related expenses, facility costs, supplies, professional and consulting fees, and allocated overhead costs. We expense research and development costs as incurred. We believe that continued investment in our products and services is important for our future growth and acquisition of new customers and, as a result, we expect our research and development expenses to continue to increase in absolute dollars. However, we expect our research and development expense to fluctuate as a percentage of revenue from period to period depending on the timing of these expenses.

 

Research and development expense increased by $7.9 million, or 33%, for the year ended December 31, 2020 compared to the same period in 2019, primarily due to an increase in stock-based compensation expense of $5.2

53

---

 

million. This in turn was due to the timing of grants of employee equity awards upon the completion of our initial public offering in November 2019 and new performance-based award grants in the year ended December 31, 2020. The remaining increase was primarily due to increased headcount and impairment charges of $1.0 million related to the cost of software that were in the process of development for internal use. The related products for which the software was developed to support in production were abandoned as we changed our roadmap and improved the final desired technical specifications required of the new products.

Sales, General and Administrative

Sales, general and administrative expense consists of personnel costs, including stock-based compensation, professional and consulting fees, accounting and audit fees, legal costs, field application engineering support, travel costs, advertising expenses, and allocated overhead costs. We expect sales, general and administrative expense to continue to increase in absolute dollars as we increase our personnel and grow our operations, although it may fluctuate as a percentage of revenue from period to period depending on the timing of these expenses.

Selling, general and administrative expense increased by $14.3 million, or 69%, for the year ended December 31, 2020 compared to the same period in 2019, primarily due to higher stock-based compensation expense of $9.6 million and higher personnel costs of $3.3 million largely related to increased headcount and remaining increase due to additional expenses for services related to the requirements of being a public company.

Other Expense

Other income (expense) consists primarily of interest expense on our outstanding debt, foreign exchange gains and losses, and asset dispositions. See Note 7 to our consolidated financial statements under Item 8 for more information about our debt.

 

 

Other expense decreased $1.0 million for the year ended December 31, 2020 compared to the same period in 2019, primarily as a result of lower interest rates and a shorter term on our outstanding revolving short-term debt as we paid in full all of our debt on July 24, 2020.

54

---

 

Income Tax Benefit (Expense)

Income tax expense consists primarily of state income taxes and income taxes in certain foreign jurisdictions in which we conduct business. We have a full valuation allowance for deferred tax assets as the realization of the full amount of our deferred tax asset is uncertain, including NOL, carryforwards, and tax credits related primarily to research and development. We expect to maintain this full valuation allowance until realization of the deferred tax assets becomes more likely than not. At December 31, 2020 and 2019, we had federal NOL carry-forwards of approximately $201.5 million and $156.5 million, respectively, and state NOL carry-forwards of approximately $64.0 million and $63.7 million, respectively. We had research and development tax credit carryforwards of approximately $3.9 million and $3.9 million, respectively for U.S. federal income tax purposes and $3.6 million and $3.6 million, respectively for state income tax purposes. Of the federal NOL carryforwards, approximately $148.4 million will expire in various years through 2036, if not utilized, and approximately $53.1 million will carry forward indefinitely. NOL carryforwards for state income tax purposes, if not utilized, will expire in various years through 2040. The research and development credit carryforwards for federal tax purposes will expire in various years through 2038, and state tax credits carry forward indefinitely.

 

 

Liquidity and Capital Resources

Before our initial public offering in November 2019, we financed our operations primarily through cash generated from product sales and proceeds from our credit facilities, including proceeds from our loan agreement with MegaChips. As of December 31, 2020 and December 31, 2019, we had cash and cash equivalents of $73.5 million and $63.4 million, respectively. Our principal use of cash is to fund our operations to support growth. In June 2020, we completed a follow-on public offering of our shares, resulting in net proceeds to us of $45.8 million after deducting underwriting discounts and commissions and deferred offering costs. On July 24, 2020, we paid down all outstanding loans with MUFG of $35.0 million and closed our credit facilities with MCC and SMBC.  We continue to have $50.0 million funds available under our credit facility with MUFG. The credit line with MUFG is no longer guaranteed by MCC.  MUFG requires us to maintain a minimum cash balance in our operating cash account equal to our outstanding loan balance. We believe that our existing cash and cash equivalents and funds available under the credit facility will be sufficient to meet our cash needs for at least the next 12 months. Over the longer term, our future capital requirements will depend on many factors, including our growth rate, the timing and extent of our sales and marketing and research and development expenditures, and the continuing market acceptance of our solutions. In the event that we need to borrow funds or issue additional equity, we cannot provide any assurance that any such additional financing will be available on terms acceptable to us, if at all. If we are unable to raise additional capital when we need it, it would harm our business, results of operations and financial condition.

Cash Flows

The following table summarizes our cash flows for the periods indicated:

 

 

55

---

 

Operating Activities

In 2020, net cash provided by operating activities of $16.6 million was primarily due to a net loss of $9.4 million being more than offset by non-cash expenses of $24.9 million and a change in operating assets and liabilities of $1.1 million. Non-cash expenses were mainly related to depreciation and amortization, stock-based compensation expense, inventory write-down, and impairment of internal-use software. The changes in operating assets and liabilities resulted in cash provided primarily due to higher accounts receivables due to timing of shipments and an increase in inventories as we managed our inventory levels being more than offset by lower prepaid expenses and other current assets related to advance payments to suppliers for inventory and higher accounts payable and accrued expenses and other liabilities due to timing of payments.

In 2019, cash provided by operating activities of $7.4 million was primarily due to a net loss of $6.6 million being more than offset by non-cash expenses of $10.0 million and a change in operating assets and liabilities of $4.0 million. Non-cash expenses were mainly related to depreciation and amortization, stock-based compensation expense and inventory write-down. Operating assets and liabilities decreased primarily due to a decrease in inventories as we managed our inventory levels and lower accounts receivable due to timing of shipments and collections, partially offset by higher prepaid expenses and other current assets related to advance payments to suppliers for inventory, lower accounts payable, accrued expenses and other liabilities due to timing of payments.

Investing Activities

Our investing activities consist primarily of capital expenditures for property and equipment purchases. Our capital expenditures for property and equipment have primarily been for general business purposes, including machinery and equipment, leasehold improvements, acquired software, internally developed software used in production and support of our products, computer equipment used internally, and production masks to manufacture our products.

In 2020, cash used in investing activities was $7.8 million and consisted primarily of the purchase of production masks, internally developed software, and other property and equipment for general business purposes to support our growth.

In 2019, cash used in investing activities was $3.2 million and consisted primarily of the purchase of production masks, internally developed software, and other property and equipment for general business purposes.

Financing Activities

Cash provided by financing activities includes proceeds from borrowings and payments under our credit facilities and proceeds from issuance of shares.

In 2020, cash provided by financing activities was $1.3 million, consisting of proceeds from issuance of shares of $45.8 million net of underwriting commissions and discounts of $2.7 million and deferred offering costs of $0.3 million and borrowings of $35.0 million offset by repayments of $76.0 million under our short-term revolving line of credit and $3.5 million payment of tax withholdings paid on behalf of employees for net share settlement at the time of vesting.

In 2019, cash provided by financing activities was $51.4 million, consisting of $56.4 million of proceeds from the initial public offering, net of issuance costs offset by repayments of $5.0 million under our short-term revolving line of credit.

56

---

 

Contractual Obligations and Commitments

Set forth below is information concerning our contractual commitments and obligations as of December 31, 2020:

 

 

Obligations under contracts that we can cancel without a significant penalty are not included in the table above. The aggregate amount of our obligations under these contracts is approximately $31.9 million as of December 31, 2020.

We signed an operating lease agreement for our corporate headquarters in Santa Clara, California that commenced on October 20, 2016 and will expire on December 31, 2026. The agreement provides for an option to renew for an additional five years and for rent payments through the term of the lease payment. We also lease office space in Michigan, Malaysia, Japan, the Netherlands, and Ukraine, all under operating leases with various expiration dates through December 2022.

We purchase components and wafers from a variety of suppliers and use several contract manufacturers to provide manufacturing services for its products. A significant portion of our reported purchase commitments arising from these agreements consists of firm, non-cancellable and unconditional purchase commitments once the production has started. In certain instances, these agreements allow us the option to cancel, reschedule, and adjust our requirements based on its business needs prior to firm orders being placed.

Off-Balance Sheet Arrangements

During the periods presented, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.

Critical Accounting Judgments and Estimates

Our consolidated financial statements have been prepared in accordance with GAAP. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, expenses, and related disclosures. We base our estimates on historical experience and on various other assumptions that we believe are reasonable under the circumstances. We evaluate our estimates and assumptions on an ongoing basis. Actual results may differ from these estimates. To the extent that there are material differences between these estimates and our actual results, our future financial statements will be affected.

The critical accounting policies requiring estimates, assumptions, and judgments that we believe have the most significant impact on our consolidated financial statements are described below.

Revenue Recognition

We derive our revenue from product sales to distributors and resellers, who in turn sell to original equipment manufacturers or other end customers. We recognize product revenue, at a point in time, upon shipment when we satisfy our performance obligations as evidenced by the transfer of control of our products to customers. We measure revenue based on the amount of consideration we expect to be entitled to in exchange for products. Variable consideration is estimated and reflected as an adjustment to the transaction price. We determine variable consideration, which consists primarily of price adjustments and product returns by estimating the amount of consideration we expect to receive from our customers based on historical experience of price adjustments and product returns. Initial estimates of price adjustments and product returns are updated at the end of each reporting period if additional information becomes available. Changes to our estimated variable consideration were not material for the periods presented. Since

57

---

 

our performance obligations relate to contracts with a duration of less than one year, we do not disclose the aggregate amount of the transaction price allocated to performance obligations that are unsatisfied or partially unsatisfied at the end of the reporting period.

As a practical expedient, we record the incremental costs of obtaining a contract, consisting primarily of sales commissions, when incurred because the amortization period is one year or less. The costs are recorded within sales and marketing expenses.

Our payment terms vary by contract type and type of customer and generally range from 30 to 60 days from shipment. We have also elected to recognize the cost for freight and shipping when control over the products sold passes to customers and revenue is recognized.

We entered into a distribution agreement with MegaChips, whereby we appointed MegaChips as the exclusive distributor of our products in Japan. We recognize revenue derived from sales of products through MegaChips in the amount of expected payments from parties which purchased the products, as adjusted for estimated price concessions and product returns.

Inventories

Inventories consist of raw and processed wafers, work-in-process, and finished goods and are stated at the lower of standard cost or net realizable value. Standard costs approximate actual costs and are based on a first-in, first-out basis. We perform detailed reviews of the net realizable value of inventories, both on hand as well as for inventories that we are committed to purchase and write-down the inventory value for estimated deterioration, excess and obsolete and other factors based on management’s assessment of future demand and market conditions and may require estimates that may include uncertain elements. Actual demand may differ from forecasted demand and such differences may have a material effect on recorded value of inventory. Once written-down, inventory write-downs are not reversed until the inventory is sold or scrapped.

Stock-Based Compensation

Stock-based compensation expense is measured at the grant date based on the fair value of the equity award and is recognized as expense over the requisite service period, which is generally the vesting period. We have elected to recognize forfeitures as they occur.

The fair value of each restricted stock unit is estimated based on the market price of our common shares on the date of grant.

We amortize stock-based compensation expense for time-based awards under the straight-line attribution method over the vesting period. Stock-based compensation expense for performance-based awards is recognized when it becomes probable that the performance conditions will be met. We amortize stock-based compensation expense for performance-based awards using the accelerated method.

Income Taxes

Deferred tax liabilities and assets are recognized for the expected future tax consequences of temporary differences between financial statement carrying amounts and the tax basis of assets and liabilities and net operating loss and tax credit carryforwards. Valuation allowances are established when necessary to reduce deferred tax assets to a level which, more likely than not, will be realized.

A tax position can be recognized only if it is more likely than not to be sustained based solely on its technical merits as of the reporting date and then only in an amount more likely than not to be sustained upon review by the tax authorities. We consider many factors when evaluating and estimating its tax positions and tax benefits, which may require periodic adjustments and which may not accurately anticipate actual outcomes.

58

---

 

Segment Reporting

We operate as one reportable segment related to the design, development, and sale of silicon timing systems solutions. Our chief operating decision maker is our Chief Executive Officer. Our Chief Executive Officer reviews operating results on an aggregate basis and manages our operations as a whole for the purpose of evaluating financial performance and allocating resources. Accordingly, we have determined that we have a single reportable and operating segment structure. Substantially all of our long-lived assets were attributable to operations in the United States as of December 31, 2020.

JOBS Act Transition Period

The JOBS Act was enacted in April 2012. Section 107(b) of the JOBS Act provides that an emerging growth company can take advantage of an extended transition period for complying with new or revised accounting standards. Thus, an emerging growth company can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have irrevocably elected not to avail ourselves of this extended transition period and, as a result, we will adopt new or revised accounting standards on the relevant dates on which adoption of such standards is required for other public companies.

Recent Accounting Pronouncements

See Note 2 to our consolidated financial statements under Item 8 for information regarding recently issued accounting pronouncements.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Foreign Currency Risk

Substantially all of our revenue is denominated in U.S. dollars. Our expenses are generally denominated in the currencies in which our operations are located, which is primarily in the United States and, to a lesser extent, in Malaysia, the Netherlands, France, Taiwan, Japan, and Ukraine. Our results of operations and cash flows are, therefore, subject to fluctuations due to changes in foreign currency exchange rates and may be adversely affected in the future due to changes in foreign exchange rates. The effect of a hypothetical 10% change in foreign currency exchanges rates applicable to our business would not have a material impact on our historical consolidated financial statements. We do not currently have a hedging policy with respect to foreign currency exchange risk.

Interest Rate Risk

We had cash and cash equivalents of $73.5 million and $63.4 million as of December 31, 2020 and 2019, respectively, consisting of bank deposits. Such interest-earning instruments carry a degree of interest rate risk. To date, fluctuations in interest income have not been significant. We paid down all our debt in the year 2020.

We do not enter into investments for trading or speculative purposes and have not used any derivative financial instruments to manage our interest rate risk exposure. Our exposure to interest rates relates to the change in the amounts of interest we must pay on our short-term revolving line of credit which changes at time of renewals. The effect of a hypothetical 10% change in interest rates applicable to our business would not have a material impact on our historical consolidated financial statements.

59

---

 

Item 8. Financial Statements and Supplementary Data.

 

 

60

---

 

Report of Independent Registered Public Accounting Firm

 

Shareholders and Board of Directors

SiTime Corporation

Santa Clara, California

 

Opinion on the Consolidated Financial Statements

 

We have audited the accompanying consolidated balance sheets of SiTime Corporation (the “Company”) as of December 31, 2020 and 2019, the related consolidated statements of operations and comprehensive loss, stockholders’ equity, and cash flows for the years then ended, and the related notes and financial statement schedule listed in the accompanying index (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2020 and 2019, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

 

Basis for Opinion

 

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

/s/ BDO USA, LLP

 

We have served as the Company’s auditor since 2019.

 

San Jose, California

 

February 16, 2021

 

61

---

 

SiTime Corporation

 

Consolidated Balance Sheets

 

 

The accompanying notes are an integral part of the consolidated financial statements.

62

---

 

SiTime Corporation

 

Consolidated Statements of Operations and Comprehensive Loss

 

 

The accompanying notes are an integral part of the consolidated financial statements.

 

63

---

 

SiTime Corporation

 

Consolidated Statements of Stockholders’ Equity

 

 

The accompanying notes are an integral part of the consolidated financial statements.

 

64

---

 

SiTime Corporation

 

Consolidated Statements of Cash Flows

 

The accompanying notes are an integral part of the consolidated financial statements.

 

65

---

 

SiTime Corporation

Notes to Consolidated Financial Statements

 

1. The Company and Summary of Significant Accounting Policies

SiTime Corporation (the “Company”) was incorporated in the State of Delaware in December 2003. The Company is a provider of silicon timing systems. The Company primarily supplies oscillator products that comprise a MEMS resonator and clock IC that is integrated into a package, as well as standalone resonators. The Company has also started to sample clock ICs. The Company’s products are designed to address a wide range of applications across a broad array of end markets. The Company operates a fabless business model and leverages its global network of distributors and resellers to address the broad set of end markets that it serves. The Company was a wholly-owned subsidiary of MegaChips Corporation (“MegaChips”), a fabless semiconductor company based in Japan and traded on the Tokyo Stock Exchange until it completed its initial public offering in November 2019. MegaChips remains the largest stockholder of the Company and held approximately 43.7% of the Company’s outstanding common stock as of December 31, 2020.

 

Outbreak of Coronavirus Disease 2019 (“the COVID-19 pandemic”)

On March 11, 2020, the World Health Organization characterized the outbreak of the coronavirus disease known as COVID-19 as a global pandemic and recommended containment and mitigation measures.  On March 13, 2020, the United States declared a national emergency concerning the outbreak, and several states and municipalities have declared public health emergencies.  To combat the spread of the COVID-19 pandemic, the United States and other foreign countries in which the Company operates have imposed measures such as quarantines and “shelter-in-place” orders that are restricting business operations and travel and requiring individuals to work from home (“WFH”), which has impacted all aspects of the Company’s business as well as those of the third-parties we rely upon for our manufacturing, assembly, testing, shipping and other operations.

The global health crisis caused by the COVID-19 pandemic has negatively impacted business activity across the globe and has impacted the Company's employees and operations.  The inputs into the Company’s judgments and estimates consider the economic implications of the COVID-19 pandemic, as the Company knows them, on the Company’s critical and significant accounting estimates.  The extent to which the COVID-19 pandemic may impact the Company’s business will depend on future developments, which are highly uncertain, including the future effects of the COVID-19 pandemic on its employees, customers, suppliers, results of operations, financial condition, or liquidity for fiscal year 2021.

Reporting Calendar

The Company’s fiscal year begins on January 1 of the year stated and ends on December 31 of the same year. The Company reports its results on a calendar year basis.

Principles of Consolidation

The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All intercompany transactions and balances have been eliminated in consolidation.

Initial and Follow-on Public Offerings

On November 25, 2019, the Company completed its initial public offering (“IPO”), in which it issued and sold 4,945,000 shares of its common stock including the full exercise of the underwriters’ over-allotment option to purchase an additional 645,000 shares at $13.00 per share, resulting in net proceeds of $56.4 million after deducting underwriting discounts, commissions and offering costs of $7.9 million.  

On June 16, 2020, the Company completed a follow-on public offering (“June 2020 Offering), in which it issued and sold 1,525,000 shares of its common stock and MegaChips sold 2,500,000 of its common stock held by them,

66

---

 

resulting in net proceeds to the Company of $45.8 million after deducting underwriting discounts and commissions of $2.7 million and deferred offering costs of $0.3 million.

Stock Split

On October 16, 2019, a pricing committee of the Company’s board of directors approved an amendment and restatement of the Company’s certificate of incorporation to (i) increase the total number of authorized shares of its common stock to 200,000,000 shares, (ii) change the par value of its common stock to $0.0001 per share, and (iii) effect a 30,000-for-1 stock split of its common stock, which was within the range previously approved by its sole stockholder. These changes became effective upon filing of the Company’s amended and restated certificate of incorporation on October 18, 2019. Subsequently, on November 6, 2019, the Company’s board of directors and sole stockholder approved an amendment and restatement of the Company’s certificate of incorporation to effect a 2-for-3 reverse stock split of its common stock, which became effective on November 6, 2019. The share and per share amounts in these consolidated financial statements and accompanying notes have been adjusted to reflect such stock split and reverse stock split.

Use of Estimates

The preparation of consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. The significant areas requiring the use of management estimates and assumptions include revenue recognition, estimate of reserve for excess and obsolete inventories, sales and warranty reserves, estimate of reserves for accounts receivable, internally developed software capitalization, and valuation allowances for deferred tax assets. Actual results may differ materially from such estimates. Management believes that the estimates, and judgments upon which they rely, are reasonable based upon information available to them at the time that these estimates and judgments are made. To the extent that there are material differences between these estimates and actual results, the Company’s consolidated financial statements will be affected.

Foreign Currency Remeasurement

The Company and its wholly-owned subsidiaries use the U.S. dollar as the functional currency. Foreign currency assets and liabilities are remeasured into U.S. dollars at the end-of-period exchange rates except for non-monetary assets and liabilities, which are measured at historical exchange rates. Revenue and expenses are remeasured using an average exchange rate in effect for the period, except for items related to non-monetary assets and liabilities, which are measured at historical exchange rates. Gains or losses from foreign currency remeasurement and transactions are included in other expense, net. For the years ended December 31, 2020 and 2019, foreign currency remeasurement and transactions gains and losses were less than $0.2 million.

Cash and Cash Equivalents

Cash and cash equivalents consist of cash balances in the Company’s bank checking and savings accounts and liquid short-term investments with original or remaining maturities of 90 days or less at the date of purchase, readily convertible to known amounts of cash.

Fair Value Measurements

The carrying amounts of the Company’s financial instruments, which include cash equivalents, accounts receivable, accounts payable, accrued liabilities, and other current liabilities, approximate their fair values due to their short maturities. The Company determines fair value measurements used in its consolidated financial statements based upon the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The fair value hierarchy distinguishes between (i) market participant assumptions developed based on market data obtained from independent sources (observable inputs), and (ii) an entity’s own assumptions about market participant assumptions developed based on the best information available in the circumstances (unobservable inputs).

67

---

 

The fair value hierarchy consists of three broad levels, which gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (Level 1) and the lowest priority to unobservable inputs (Level 3). The three levels of the fair value hierarchy are described below:

Level 1:    Valuations based on quoted prices in active markets for identical assets or liabilities that the entity has the ability to access.

Level 2:    Valuations based on quoted prices for similar assets or liabilities, quoted prices in markets that are not active, or other inputs that are observable or can be corroborated by observable data for substantially the full term of the assets or liabilities.

Level 3:    Valuations based on inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

At December 31, 2020 and 2019, cash balances in bank checking and savings accounts of $18.4 million and $28.4 million, were valued using Level 1 of the fair value hierarchy. At December 31, 2020 and December 31, 2019, highly liquid money market funds of $55.1 million and $35.0 million, respectively, were valued using Level 1, of the fair value hierarchy, quoted prices in active markets for identical assets and are included in cash equivalents.

There were no transfers between Level 1 and Level 2 categories during any of the periods presented.

Accounts Receivable and Allowances for Credit Losses

Accounts receivable are stated at amounts estimated by management to be net realizable value. An allowance for credit losses is recorded when it is probable that amounts will not be collected based on historical collection trends, age of outstanding receivables, specific customer circumstances, existing economic conditions and future forecasted information. The Company performs periodic credit evaluations of its customers’ financial condition and generally requires no collateral from its customers. Losses have not been significant in any of the periods presented.

Concentration of Credit Risk

Financial instruments that potentially subject the Company to significant concentrations of credit risk consist principally of cash and cash equivalents and accounts receivable. The Company’s cash and cash equivalents amount is subject to concentration of credit risk. The Company maintains some cash and cash equivalents balances that are in excess of Federal Deposit Insurance Corporation insurance limits with financial institutions.

The Company extends credit based on an evaluation of the customer’s financial condition and collateral is not typically required. The Company primarily sells its products through third-party distributors and resellers. For the years ended December 31, 2020 and 2019, three distributors directly accounted for 10% or more of the Company’s revenue.

The following table discloses these customers’ percentage of revenue for the respective periods:

 

 

68

---

 

At December 31, 2020 and 2019, three customers accounted for 10% or more of accounts receivable, as disclosed below:

 

 

Inventories

Inventories are stated at the lower of standard cost (which approximates actual cost on a first-in, first-out basis) or net realizable value. The Company, at least quarterly, assesses the recoverability of all inventories to determine whether adjustments are required to record inventory at the lower of cost or net realizable value. The Company reduces the value of inventory by establishing excess and obsolete inventories reserves based on management’s assessment of future demand and market conditions and may require estimates that may include uncertain elements. Actual demand may differ from forecasted demand and such differences may have a material effect on recorded value of inventory. Inventory reserve write-downs, once established, are not released until the related inventory has been sold or scrapped. Rebates from the Company’s foundries are recorded as a reduction of inventory cost and are recognized in cost of revenue over the inventory turnover days of the Company. Most of the Company’s inventory is warehoused at its contract manufacturers.

Property and Equipment

Property and equipment are recorded at cost, less accumulated depreciation. Depreciation of property and equipment is recognized on a straight-line basis over the estimated useful lives of the respective assets as follows:

 

 

The Company capitalizes the costs of purchased mask sets that are utilized during the photolithography phase of manufacturing our products, when technological feasibility and marketability have been established. The capitalization occurs upon the completion of a detailed design, the absence of significant development uncertainties and the determination of market acceptance. Such amounts are included in property and equipment in the consolidated balance sheets and are amortized to cost of revenue over their estimated useful life of 5 years. However, if significant uncertainties exist regarding the future utility of a particular mask set, then its related costs are expensed to research and development at the time the significant uncertainties are identified.

Maintenance and repair costs are charged to expense as incurred, and expenditures that extend the useful lives of assets are capitalized. Upon retirement or sale of the property and equipment, the cost and related accumulated depreciation are removed from the balance sheet and the resulting gain or loss is recorded in other expense, net.

Intangible Assets

Intangible assets include the costs related to acquired software as well as costs related to software internally developed, or modified solely to meet the Company’s internal requirements, with no substantive plans to market such software at the time of development. The Company develops proprietary design automation software for its MEMS-based resonators. Costs incurred during the preliminary planning and evaluation stage of the project and during post implementation operational stage are expensed as incurred. Costs incurred during the application development stage of the software are capitalized. The Company defines the configuration and coding process as the application development stage. Capitalized internal use software costs are amortized, on a straight-line basis under cost of revenue over the

69

---

 

estimated useful life of approximately 2 to 3 years. Purchased intangibles with finite lives are amortized using the straight-line method over the estimated economic lives of the assets of 3 years.

Leases

The Company applies the guidance in Accounting Standards Codification (“ASC”), Topic 842 to individual leases of assets. The Company recognizes a transaction as a lease when it receives substantially all of the economic benefits from and directs the use of specified property, plant and equipment.

Operating leases are included in right-of-use (“ROU”), assets, accrued expenses and other current liabilities, and lease liabilities in the Company’s consolidated balance sheets. ROU assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent the present value of the Company’s obligation to make lease payments arising from the lease. The Company currently does not have any finance leases.

The Company has elected the practical expedient within ASC Topic 842 to not separate lease and non-lease components within lease transactions for all classes of assets. Additionally, the Company has elected the short-term lease exception for all classes of assets and does not apply the recognition requirements for leases of 12 months or less and recognizes lease payments for short-term leases as expense either straight-line over the lease term or as incurred depending on whether the lease payments are fixed or variable. These elections are applied consistently for all leases.

When discount rates implicit in leases cannot be readily determined, the Company uses the applicable incremental borrowing rate at lease commencement to perform lease classification tests on lease components and to measure ROU assets and lease liabilities. The incremental borrowing rate used by the Company was based on the rate of interest that the Company would have to pay to borrow on a collateralized basis over a similar term, an amount equal to the lease payments in a similar economic environment.

Impairment of Long-Lived Assets

The Company evaluates its long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to future undiscounted net cash flows expected to be generated by the asset. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the estimated fair value of the assets.

The Company determined that no events or changes in circumstances indicate that impairment of its long-lived assets has occurred.

Warranty

The Company provides limited lifetime warranty coverage on all of its products by guaranteeing that all timing components from the Company will be free from defects in workmanship and materials and will conform to specifications for the life of the system. This assurance-type warranty is not considered a separate performance obligation, and thus no transaction price is allocated to it. The Company records the warranty costs in cost of revenue in the consolidated statements of operations and comprehensive income (loss). The warranty reserve is calculated using historical claim information to project future warranty claims activity and is recorded within accrued expenses and other current liabilities and other long-term liabilities on the consolidated balance sheets based on the expected timing of the related payments. To date, the Company has had negligible returns of any defective products, and hence the warranty reserve balances as of December 31, 2020 and 2019 were less than $0.1 million.

70

---

 

Income Taxes

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the carrying amounts in the consolidated financial statements of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards, using enacted tax rates in effect for the year in which the differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in earnings in the period that includes the enactment date. A valuation allowance is provided in order to reduce the deferred tax assets to a level which, more likely than not, will be realized.

The Tax Cuts and Jobs Act of 2017 (the “Tax Act”) and The Coronavirus Aid, Relief, and Economic Security (“CARES Act”) , makes broad and complex changes to the U.S. tax code. These computations require significant judgments and estimates to be made regarding the interpretation of the provisions within the Tax Act along with the preparation and analysis of information not previously required.

While the Company believes it has adequately reserved for its uncertain tax positions, no assurance can be given that the final tax outcome of these matters will not be different. The Company adjusts these reserves in light of changing facts and circumstances, such as the closing of a tax audit. To the extent that the final tax outcome of these matters is different than the amounts recorded, such differences will impact the provision for income taxes and the effective tax rate in the period in which such determination is made.

The Company recognizes tax positions in the consolidated financial statements only when it is more likely than not that the position will be sustained upon examination by the relevant taxing authority. Liabilities are established for differences between positions taken in a tax return and amounts recognized in the consolidated financial statements. The Company reports interest and penalties related to uncertain tax positions, if any, in the provision for income taxes in the consolidated statements of operations and comprehensive income (loss). To the extent that accrued interest and penalties do not ultimately become payable, amounts accrued will be reduced and reflected as a reduction of the overall provision for income taxes in the period that such determination is made.

Revenue Recognition

The Company derives revenue from its product sales to distributors and resellers, who in turn sell to original equipment manufacturers or other end customers. The Company recognizes product revenue, at a point in time, upon shipment when it satisfies its performance obligations as evidenced by the transfer of control of its products to customers. The Company measures revenue based on the amount of consideration it expects to be entitled to in exchange for products. Variable consideration is estimated and reflected as an adjustment to the transaction price. The Company determines variable consideration, which consists primarily of price adjustments and product returns by estimating the amount of consideration the Company expects to receive from its customers based on historical experience of price adjustments and product returns. Initial estimates of price adjustments and product returns are updated at the end of each reporting period if additional information becomes available. Changes to the Company’s estimated variable consideration were not material for the periods presented. Since the Company’s performance obligations relate to contracts with a duration of less than one year, it does not disclose the aggregate amount of the transaction price allocated to performance obligations that are unsatisfied or partially unsatisfied at the end of the reporting period.

The Company’s payment terms vary by contract type and type of customer and generally range from 30 to 60 days from shipment. The Company has also elected to recognize the cost for freight and shipping when control over the products sold passes to customers and revenue is recognized.

As a practical expedient, the Company records the incremental costs of obtaining a contract, consisting primarily of sales commissions, when incurred because the amortization period is one year or less. These costs are recorded within sales and marketing expenses. The Company entered into a distribution agreement with MegaChips, whereby the Company appointed MegaChips as the exclusive distributor of its products in Japan. The Company recognizes revenue

71

---

 

upon shipment derived from sales of products through MegaChips in the amount of expected payments from parties which purchased the products as adjusted for estimated price concessions and product returns.

Cost of Revenue

Cost of revenue consists of wafers acquired from third-party foundries, assembly, packaging, and test cost of the Company’s products paid to third-party contract manufacturers, and personnel and other costs associated with the manufacturing operations of the Company. Cost of revenue also includes depreciation of production equipment, inventory write-downs, amortization of internally developed software, shipping and handling costs, and allocation of overhead and facility costs. The Company also includes credits for rebates received from foundries to cost of revenue.

Research and Development Expenses

Research and development costs consist primarily of personnel cost, material cost, and facilities related expenses, incurred in the course of planned research and development of new products. Research and development costs are expensed as incurred.

Selling, General and Administrative Expenses

Selling, general and administrative expenses primarily consist of personnel costs, field application engineering support, travel costs, professional and consulting fees, accounting and audit fees, legal, advertising expenses, and allocated overhead costs. Selling, general and administrative costs are expensed as incurred. Advertising expenses were $0.3 million and $0.3 million, for the years ended December 31, 2020 and 2019.

Stock-Based Compensation

The Company measures and recognizes compensation expense for all stock-based awards made to employees, based on estimated fair values using the straight-line method over the requisite service period. The Company recognizes forfeitures as they occur.

The Company granted restricted stock units (“RSUs”) of its own common stock after the completion of its IPO and such grants were valued at the fair market value of the Company’s stock on the date of the grant.

The Company amortizes stock-based compensation expense for time-based awards under the straight-line attribution method over the vesting period. Stock-based compensation expense for performance-based awards is recognized when it becomes probable that the performance conditions will be met. The Company amortizes stock-based compensation expense for performance-based awards using the accelerated method.

Net Loss Per Share Attributable to Common Stockholder

Basic net loss per share attributable to common stockholder is calculated by dividing the net loss attributable to common stockholder by the weighted-average number of shares of common stock outstanding during the period, without consideration for potentially dilutive securities. Diluted net loss per share is computed by dividing the net loss attributable to common stockholder by the weighted-average number of shares of common stock and potentially dilutive securities outstanding for the period. For purposes of the diluted net loss per share calculation, the Company does not have any stock issuances that are considered to be potentially dilutive securities. As such, the net loss was attributed entirely to common stockholder. Because the Company has no potentially dilutive securities for the years ended December 31, 2020 and 2019, diluted net loss per share attributable to common stockholder is the same as basic net loss per share attributable to common stockholder for all periods presented.

Comprehensive Loss

The Company has no components of other comprehensive income loss. Therefore, net loss equals comprehensive loss for all periods presented.

72

---

 

2. Recent Accounting Pronouncements

Recently Adopted Accounting Guidance

In August 2018, the FASB issued ASU 2018-15, Intangibles-Goodwill and Other-Internal-Use Software (Subtopic 350-40): Customer’s Accounting for Implementation Costs Incurred in a Cloud Computing Arrangement That Is a Service Contract, which aligns the requirements for capitalizing implementation costs incurred in a cloud computing arrangement that is a service contract with the requirements for capitalizing implementation costs incurred to develop or obtain internal-use-software. The standard is effective for public companies for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2019. Early adoption is permitted. The adoption of this standard on January 1, 2020 did not have any impact on the Company's consolidated financial position, results of operations and cash flows.

In August 2018, the FASB issued ASU 2018-13, Fair Value Measurement (Topic 820): Disclosure Framework—Changes to the Disclosure Requirements for Fair Value Measurement, which modifies the disclosure requirements in Topic 820. The adoption of this standard on January 1, 2020 did not have any impact on the Company's disclosures.

In June 2016, the FASB issued ASU 2016-13, Financial Instruments – Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, which changes the credit loss model from an incurred loss approach to an expected loss approach. It requires the application of a current expected credit loss (“CECL”) impairment model to financial assets measured at amortized cost (including trade accounts receivable) and certain off-balance-sheet credit exposures. Under the CECL model, lifetime expected credit losses on such financial assets are measured and recognized at each reporting date based on historical, current, and forecasted information. The standard also changes the impairment model for available-for-sale debt securities, eliminating the concept of other than temporary impairment and requiring credit losses to be recorded through an allowance for credit losses. The amount of the allowance for credit losses for available-for-sale debt securities is limited to the amount by which fair value is below amortized cost. The Company adopted the standard on January 1, 2020 using a modified retrospective adoption method. The adoption of this standard did not have any impact on the Company's consolidated financial position, results of operations and cash flows.  The quarterly information presented in the 10-K is not on a consistent basis as the annual information because of the timing of adoption of the accounting standard.

New Accounting Pronouncements Not Yet Adopted

In December 2019, the FASB issued ASU 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes, which eliminates certain exceptions related to the approach for intraperiod tax allocation, the methodology for calculating income taxes in an interim period and the recognition of deferred tax liabilities for outside basis differences. It also clarifies and simplifies other aspects of the accounting for income taxes. The new standard will be effective for fiscal years beginning after December 15, 2020. The adoption of this standard is not expected to have a material impact on the Company's consolidated financial position, results of operations and cash flows.

73

---

 

3. Net Loss Per Share

The following table summarizes the computation of basic and diluted net loss per share attributable to common stockholder of the Company:

 

 

4. Balance Sheets Components

Accounts Receivable, net

Accounts receivable, net consisted of the following:

 

Inventory

Inventory consisted of the following:

 

 

74

---

 

Prepaid Expenses and Other Current Assets

Prepaid expenses and other current assets consisted of the following:

 

 

Property and Equipment, Net

Property and equipment, net consisted of the following:

 

 

Depreciation expense related to property and equipment was $3.7 million and $3.3 million for the years ended December 31, 2020 and 2019, respectively.

Intangible Assets, Net

Intangible assets, net consisted of the following:

 

 

Amortization expense for intangible assets was $2.7 million, and $4.9 million, for the years ended December 31, 2020 and 2019, respectively. In the year ended December 31, 2020 the Company recorded impairment charges of $1.0 million related to capitalized cost of software that was within the development phase and was being developed solely to meet the Company’s internal needs. The related product for which the software was developed to support in production was abandoned as the Company changed its roadmap and improved the final desired technical specifications required of the new product. Accordingly, it was no longer probable that the software project will be completed and placed into

75

---

 

service. The impairment charge was recorded as research and development expense in the consolidated statement of operations.

As of December 31, 2020 and 2019, the Company had $0.7 million and $2.0 million, respectively, of intangibles that were still in development stage and were not being amortized. The estimated aggregate future amortization expense for intangible assets in development stage and subject to amortization as of December 31, 2020 is summarized as below:

 

 

Accrued Expenses and Other Current Liabilities

Accrued expenses and other current liabilities consisted of the following:

 

 

5. Leases

The Company leases real estate property under operating leases. The Company was also a lessee and a sublessor from an accounting perspective for its Santa Clara lease through March 31, 2019.

The Company signed a non-cancellable operating lease agreement for its corporate headquarters in Santa Clara, California, that commenced on October 20, 2016 and will expire on December 31, 2026. The agreement provides for an option to renew for an additional 5 years and for monthly rent payments through the term of the lease.

The Company also leases office space in Michigan, Malaysia, Japan, the Netherlands, and Ukraine all under non-cancellable operating leases with various expiration dates through December 2022. These leases are classified as operating leases. The remaining lease terms vary from few months to 6 years. For its leases the Company has options to extend the lease term for periods varying from one to five years. These renewal options are not considered in the remaining lease term unless it is reasonably certain that the Company will exercise such options. The Company also has variable lease payments that are primarily composed of common area maintenance and utility charges.

76

---

 

In the year ended December 31, 2018, the Company signed an agreement to lease equipment of $3.2 million for research and development and to help with the production of certain of its products. The lease term for such equipment is approximately 10 years.

The table below presents the lease-related assets and liabilities recorded on the consolidated balance sheet as of December 31, 2020 and 2019:

 

 

The table below presents certain information related to the lease costs for operating leases for the years ended December 31, 2020 and 2019:

 

 

Cash paid for operating lease liabilities was $2.3 million and $3.9 million for the year ended December 31, 2020 and 2019 respectively,  The Company sub-leased a portion of its Santa Clara facility through March 31, 2019 and received $0.1 million in sub-lease income for the year ended December 31, 2019, which was included in the short-term lease cost above.

77

---

 

Undiscounted Cash Flows

The table below reconciles the undiscounted cash flows for each of the first five years and total of the remaining years to the operating lease liabilities recorded on the consolidated balance sheet as of December 31, 2020:

 

 

As of December 31, 2020, the Company had two leases in Japan for a total cost of less than $0.1 million that had not yet commenced.

6. Commitments and Contingencies

Purchase Commitments

The Company purchases components from a variety of suppliers and uses several contract manufacturers to provide manufacturing services for its products. During the normal course of business, in order to manage manufacturing lead times and to help ensure adequate component supply, the Company enters into agreements with the Company’s contract manufacturers and suppliers that allow them to procure inventory based upon criteria as defined by the Company. A portion of the Company’s reported purchase commitments arising from these agreements consists of firm, non-cancelable purchase commitments. In certain instances, these agreements allow the Company the option to cancel, reschedule, and adjust the Company’s requirements based on its business needs prior to when production starts. However, in situations where the Company is unable to cancel, reschedule, or adjust the purchase commitment due to changing customer demand, excess inventories could result in material inventory provisions. As of December 31, 2020, the Company had a commitment of $2.1 million for a license which will be paid equally through July 2023.

Commitments for MEMS Wafer Supplier Agreement

The Company purchases MEMS wafers required for its silicon timing systems products under a multi-year manufacturing agreement with a third-party supplier. Under this agreement, the Company has agreed to minimum quantity purchase commitments and is responsible for research and development, tooling, and samples cost, in addition to wafer costs. The Company has historically met the supplier’s minimum wafer quantity requirements.  

Indemnification

The Company is a party to a variety of agreements pursuant to which it may be obligated to indemnify other parties to such agreements with respect to certain matters. Typically, these obligations arise in the context of contracts that the Company has entered into, under which the Company customarily agrees to hold the other party harmless against losses arising from a breach of representations and covenants or terms and conditions related to such matters as the sale and/or delivery of its products, title to assets sold, certain intellectual property claims, defective products, specified environmental matters, and certain income taxes. Further, the Company’s obligations under these agreements may be limited in terms of time, amount, or the scope of its responsibility and in some instances, the Company may have recourse against third parties for certain payments made under these agreements. It is not possible to predict the maximum potential amount of future payments under these agreements due to the conditional nature of the Company’s

78

---

 

obligations and the unique facts and circumstances involved in each particular agreement. Historically, the Company has had no material indemnification claims under these agreements.

Legal Matters

From time to time, the Company may be a party to various litigation claims in the normal course of business. Legal fees and other costs associated with such actions are expensed as incurred. The Company assesses, in conjunction with legal counsel, the need to record a liability for litigation and contingencies. Accrual estimates are recorded when and if it is determined that such a liability for litigation and contingencies are both probable and reasonably estimable.

In March 2019, VTT Technical Research Centre of Finland, Ltd. ("VTT") filed suit in the United States District Court for the Northern District of California alleging infringement by the Company of a patent relating to specific combinations of features set forth in U.S. Patent No. 8,558,643. The complaint sought unspecified monetary damages and injunctive relief. On January 22, 2020, the Company participated in a mediation that had been ordered by the Court.  The case was not resolved at the mediation. A Markman Hearing was held on May 15, 2020 relating to a number of different disputed claim terms, and on July 9, 2020 the Court issued a Markman Order relating to those disputed claim terms.  Among its determinations, the Court found that one of the disputed claim terms was indefinite, as well as any claim that had this claim term in it.  On July 17, 2020, the Court issued a judgment finding all claims of U.S. Patent No. 8,558,643 invalid, based upon its Markman Order.  VTT filed a Notice of Appeal of the Court's judgment with the US Court of Appeals for the Federal Circuit and filed its opening brief on November 19, 2020 and the Company filed its response brief on January 28, 2021. The potential loss is currently neither probable nor reasonably estimable.

 

7. Debt Obligations

The Company has borrowed against the short-term revolving lines of credit that it has arranged with financial institutions like The Bank of Tokyo-Mitsubishi UFJ, Ltd.(“MUFG”), and Sumitomo Mitsui Banking Corporation (“SMBC”), and MegaChips to fund its operations. The weighted-average interest rate on short-term borrowings outstanding as of December 31, 2019 was 1.42%.

Debt obligations as of December 31, 2020 and 2019 consisted of the following:

 

 

As of December 31, 2019, debt obligations were as follows (dollars in thousands):

 

79

---

 

 

 

Revolving Line of Credit

The Bank of Tokyo-Mitsubishi Credit Facility

On August 31, 2015, the Company entered into a bank transaction agreement with MUFG. The agreement provided for a revolving line of credit with a maximum available borrowing of $20.0 million. On June 29, 2018, the Company increased the revolving line of credit to $50.0 million through July 31, 2020. Between August 2015 and December 31, 2019, the Company borrowed $139.0 million in several draw-downs against the revolving line of credit with terms ranging from one month to one year and interest rate ranging between 1.01 % to 4.07%.

Renewal and extensions on the MUFG loans for the years ended December 2019 and 2020 have been set forth below:

 

 

On July 24, 2020, the Company paid down all outstanding loans with MUFG of $35.0 million of which $12.0 million of loans were prepaid with a penalty of $0.1 million. Effective June 30, 2020, the MegaChips guarantee for the revolving line of credit with MUFG has been terminated. Upon termination of the guarantee, the Company agreed to maintain a minimum cash balance in its operating cash account equal to its outstanding loan balance with MUFG.  The minimum cash balance requirement is a compensating balance arrangement that does not legally restrict any cash amounts that are shown in the condensed consolidated balance sheet. The Company continues to have $50.0 million funds available under its credit facility with MUFG. Interest under the revolving line of credit was calculated at MUFG’s prevailing prime rate plus a margin of 2 percentage points which would be agreed by the Company at the time each loan was made. Interest was due for payment on the maturity date of each loan. The Company did not incur any costs upon renewal of the revolving credit line or at the time of increase in the revolving line of credit.

The agreement contains customary representations and warranties, affirmative covenants, and events of default upon the occurrence of certain events, such as nonpayment of amounts due under the revolving line of credit, violation of contractual provisions, or a material adverse change in the Company’s business. The agreement also includes customary administrative covenants, including a limitation on entering any transactions involving a merger or consolidation, reorganization, spin-off, liquidation, dissolution, winding up, or conveying, selling, leasing, licensing, or otherwise disposing of all or substantially all of the Company’s property, assets, or business. As of December 31, 2020 and 2019, the Company was in compliance with all covenants.

Terminated Loans

Sumitomo Mitsui Banking Corporation Credit Facility

On September 22, 2017, the Company entered into an uncommitted and revolving credit line agreement with SMBC. The revolving credit line has a maximum available borrowing availability of up to $20.0 million. The Company could draw loans under the revolving credit line from time to time through September 21, 2018, as long as the principal amount at any time did not exceed $20.0 million in the aggregate. Such term was extended for an additional year through September 20, 2019 and further extended for an additional year through September 21, 2020. The Company closed its line of credit in September 2020. Loans under the revolving credit line may have a maturity from one day to 12 months from the date of borrowing. The loans borrowed under the revolving line of credit bear a variable rate of interest based upon SMBC’s prevailing prime rate plus a margin of 1 percentage point which would be agreed by the Company at the time each loan was made. Interest was due for payment on the maturity date of each loan. SMBC had

80

---

 

the right to terminate the revolving credit line in whole or part in its sole discretion. The Company did not incur any costs at the initiation of the revolving line of credit or upon renewal of the revolving credit line.

The agreement contained customary representations and warranties, affirmative covenants, negative covenants, and events of default upon the occurrence of certain events, such as nonpayment of amounts due under the revolving line of credit, violation of contractual provisions, or a material adverse change in the Company’s business. In addition, the agreement included a financial covenant for a minimum net worth, defined as total assets less total liabilities, of $0. The agreement also included customary administrative covenants, including a limitation on entering any transactions involving a merger or consolidation, reorganization, spin-off, liquidation, dissolution, winding up, or conveying, selling, leasing, licensing, or otherwise disposing of all or substantially all of the Company’s property, assets, or business. As of December 31, 2019, the Company was in compliance with all covenants. The agreement provided that the Company would provide collateral if SMBC determined in consultation with the Company that additional collateral or guarantee would be necessary. Use of proceeds from the loan was restricted for certain specified purposes. The SMBC revolving line of credit was guaranteed by MegaChips.

MegaChips Loan

On September 13, 2016, the Company entered into a loan agreement with MegaChips for a revolving credit limit of up to $30.0 million (the “MegaChips Loan Agreement”). Loans under the MegaChips Loan Agreement bear interest at a rate equal to the interest rate at which MegaChips procured the funds from SMBC, plus 0.09%. Interest for each loan is due on the maturity date of each loan. Each loan drawn from MegaChips has a three-month term, which term was renewed on maturity. MegaChips has discretion whether to accept the Company’s request for a loan under the MegaChips Loan Agreement. The initial term of the MegaChips Loan Agreement is one year from the date of the agreement, which term is automatically renewed and extended every year unless either party provides written notice to the other party. The Company did not incur any costs at the time of initiation of such credit facility or at the time of extension of the term of the credit facility.

The agreement contains usual and customary events of default upon the occurrence of certain events, such as nonpayment of amounts due under the revolving line of credit, violation of contractual provisions, a material adverse impact on the Company’s business, or its ability to perform under the agreement. The agreement includes customary administrative covenants but does not contain any negative covenants or conditions to borrowing.

The outstanding balance under the revolving line with MegaChips was repaid on December 12, 2019 upon maturity. During the year ended December 31, 2020, the Company closed its revolving line of credit with MegaChips. As of December 31, 2019, the Company was in compliance with all covenants.

 

 

8. Stockholders’ Equity

The Company’s certificate of incorporation, as amended and currently in effect, authorizes the Company to issue 200,000,000 shares of common stock, par value $0.0001 per share. Each share of common stock is entitled to one vote. The holders of common stock are also entitled to receive dividends whenever funds are legally available and when and if declared by the board of directors, subject to the prior rights of holders of all classes of preferred stock outstanding. The Company has never declared any dividends.

9. Stock-based Compensation

SiTime Corporation 2019 Stock Incentive Plan

Upon completion of its IPO in November 2019, the Company adopted the SiTime Corporation 2019 Stock Incentive Plan (the “2019 Plan”), which initially reserved approximately 3.4 million shares of the Company’s common stock. The 2019 Plan provides for the grant of incentive stock options, non-statutory stock options, restricted stock awards, restricted stock unit awards, stock appreciation rights, performance stock awards, and other forms of equity compensation (collectively, “stock awards”), and cash awards, all of which may be granted to employees (including officers), directors, and consultants or affiliates. Awards granted under the 2019 Plan vest at the rate specified by the

81

---

 

plan administrator, for restricted stock unit awards typically with quarterly vesting over four years. As of December 31, 2020, 0.3 million shares were still reserved for issuance.

The Company granted 3.0 million new time-based restricted stock awards in the year ended December 31, 2019 with quarterly vests primarily over two to five years. Activity of RSUs granted under the Plan is set forth below:

 

 

On August 4, 2020, the Compensation Committee of the Company adopted and approved the Executive Bonus and Retention Plan (the “Bonus and Retention Plan”) with target bonus amounts and performance goals for the second half of the fiscal year 2020 (the “2020 Goals”). The 2020 Goals are based on the achievement of revenue and Non-GAAP operating profit for the second half of 2020, as well as individual performance goals. The target bonuses were granted based on a fixed dollar amount to be settled in restricted stock units on the vesting date and hence the awards have been classified as liability-based awards. Such expense is included in the non-cash adjustment within stock-based compensation expense on the consolidated cash flow statement. The liability of $1.2 million was recorded as accrued expenses and other current liabilities in the consolidated balance sheet. Actual payouts ranged from 119% to 144% of target, based on performance.

 

In the year ended December 31, 2020, the Company granted cash based RSUs (the “CRSU”) as part of an employee bonus plan. Generally, such units are granted quarterly and fully vest at the end of the quarter they are granted except units granted to new hires that have a one-year cliff vesting. Such awards have also been classified as liability-based awards.

 

The fair value of shares vested during the year ended December 31, 2020 was $43.7 million of which $0.9 million related to CRSU. For the year ended December 31, 2020, the Company issued 657,201 shares of common stock in connection with the vesting of RSUs. The difference between the number of RSUs vested and the shares of common stock issued is the result of RSUs withheld in satisfaction of minimum tax withholding obligations associated with the vesting.

82

---

 

Total stock-based compensation expense for employees recognized in the consolidated statements of operations and comprehensive income (loss) was as follows:

 

 

At December 31, 2020, there was $57.6 million and $0.6 million of unamortized compensation costs related to RSUs granted and liability-based awards. The unamortized compensation cost is expected to be recognized over a weighted average period of 3.80 years for equity awards and 0.44 years for liability-based awards.

10. Income Taxes

The components of income (loss) before income taxes were as follows:

 

 

The components of income tax (expense) benefit were as follows:

 

 

83

---

 

The material components of the deferred tax assets and liabilities consisted of net operating loss carry-forwards and tax credit carry-forwards.

 

 

The net valuation allowance decreased by $10.5 million for the year ended December 31, 2020.

A reconciliation of the Company’s effective tax rate to the statutory U.S. federal rate is as follows:

 

 

The reported amount of income tax expense differs from an expected amount based on statutory rates primarily due to the Company’s valuation allowance.

As of December 31, 2020 and 2019, based on the available objective evidence, management believes it is more likely than not that the net deferred tax assets will not be realized. Accordingly, management has applied a full valuation allowance against its net deferred tax assets at December 31, 2020 and 2019.

At December 31, 2020 and 2019, the Company has federal net operating loss carry-forwards of approximately $201.5 million and $156.5 million, respectively, and state net operating loss carry-forwards of approximately $64.0 million and $63.7 million, respectively. At December 31, 2020 and 2019, the Company has net operating loss carryforwards for foreign income tax purposes of approximately $2.2 million and $1.3 million, respectively. These federal, state, and foreign net operating loss carry-forwards will expire beginning in 2025, 2028, and 2028, respectively. Of the total federal net operating loss carryforward, $55.7 million will not expired as a result of the Tax Act.

At December 31, 2020 and 2019, the Company also has federal research and development tax credit carry-forwards of approximately $3.9 million and $3.9 million, respectively, and state research and development tax credit carry-forwards of approximately $3.6 million and $3.6 million, respectively. The federal tax credits begin to expire in 2025, and the California tax credits carry forward indefinitely.

Utilization of the net operating loss carry-forwards and credits may be subject to a substantial annual limitation due to the ownership change limitations provided by the Internal Revenue Code of 1986, as amended (“the Code”), and similar state provisions. The annual limitation may result in the expiration of net operating losses and credits before utilization.

84

---

 

As of December 31, 2020 and 2019, the Company had $2.4 million and $2.2 million of total unrecognized tax benefits. The Company currently has a full valuation allowance against its net deferred tax assets which would impact the timing of the effective tax rate benefit should any of these uncertain tax positions be favorably settled in the future. If the Company is able to eventually recognize these uncertain tax positions, none of the unrecognized benefit would reduce the Company’s effective tax rate due to full valuation allowance of the Company’s deferred tax assets. The Company’s policy is to record interest and penalties related to unrecognized tax benefits as income tax expense. During the years ended December 31, 2020 and 2019, the Company had immaterial amounts related to the accrual of interest and penalties.

A reconciliation of the beginning and ending unrecognized tax benefit amount is as follows:

 

 

The Company does not have any tax positions for which it is reasonably possible the total amount of gross unrecognized tax benefits will increase or decrease within 12 months of the years ended December 31, 2020 and 2019.

The Company files tax returns as prescribed by the tax laws of the jurisdictions in which it operates. In the normal course of business, the Company is subject to examination by federal, state, local, and foreign jurisdictions, where applicable. Due to the Company’s net losses, its federal, state and local, and foreign tax returns since inception are subject to audit.

As of December 31, 2020, the tax years that remain subject to examination by the major tax jurisdictions under the statute of limitations are as follows:

 

 

11. 401(k) Plan

The Company has a 401(k) retirement plan that qualifies as a defined contribution plan. All employees are eligible to participate on the first day of the month following their hire date with the Company. Under the defined contribution plan, employees may contribute up to the lesser of 90% of their pre-tax salaries per year or the maximum contribution allowed under the Code. The Company may make discretionary matching contributions, if deferral contributions are made by the employees. The Company’s matching contributions for the years ended December 31, 2020 and 2019 resulted in expense of $0.6 million in each year.

12. Segment Information and Operations by Geographic Area

The Company operates in one reportable segment related to the design, development, and sale of silicon timing systems solutions. The chief operating decision maker, for the Company is the Chief Executive Officer. The Company’s Chief Executive Officer reviews operating results on an aggregate basis and manages the Company’s operations as a whole for the purpose of evaluating financial performance and allocating resources. Accordingly, the Company has determined that it has a single reportable and operating segment structure.

85

---

 

The following table sets forth revenue by country, based on ship-to destinations, for countries with 10% or more of the Company’s revenue during any of the periods presented:

 

 

The Company’s long-lived assets in the U.S. attributable to operations as of December 31, 2020 and 2019 were 97% of total property and equipment and intangible assets.

13. Related Party Transactions

The Company entered into an agreement with MegaChips, whereby the Company appointed MegaChips as the exclusive sales representative of its products in Japan. The Company sells products through MegaChips to distributors, resellers, or direct customers in Japan. The Company pays MegaChips a fixed percentage of the revenue as sales commission, which is recorded as commission expense and included in sales and marketing in the consolidated statements of operations and comprehensive income (loss).

MegaChips is the largest stockholder of the Company and held approximately 43.7% and 66.8% of the Company’s outstanding common stock as of  December 31, 2020 and December 31, 2019, respectively.

In the year ended December 31, 2020, the Company entered into an asset purchase agreement with MegaChips Corporation. The Company recorded the equipment of $0.1 million on the consolidated balance sheet under “Property and equipment, net.”

In the year ended December 31, 2020 the Company entered into an equipment purchase agreement with MegaChips Taiwan Corporation, a wholly-owned subsidiary of MegaChips Corporation. The Company recorded the equipment of $0.1 million on the consolidated balance sheet under “Property and equipment, net.”

In the year ended December 31, 2020 the Company entered into a services and secondment agreement with MegaChips LSI USA Corporation, a wholly-owned subsidiary of MegaChips Corporation. The Company records the transactions as consulting expenses as part of its research and development expense on the consolidated statement of operations and comprehensive loss.

See Note 7, “Debt Obligations” for more information regarding the Company’s loan agreement with MegaChips.

 

The following is a summary of significant balances, transactions and payments with the related parties and affiliates.

 

86

---

 

 

 

 

 

87

---

 

UNAUDITED QUARTERLY FINANCIAL DATA

Fiscal Year 2020

 

 

Fiscal Year 2019

 

 

 

 

88

---

 

 

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.

None

Item 9A. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures.

We maintain “disclosure controls and procedures,” as such term is defined in Rules 13a-15 (e) and 15d – 15(e) under the Exchange Act, that are designed to provide reasonable assurance that information required to be disclosed by us in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer (principal executive officer) and Chief Financial Officer (principal financial officer), as appropriate, to allow for timely decisions regarding required disclosure.

Based on their evaluation as of the end of the period covered by this Annual Report on Form 10-K, our Chief Executive Officer and Chief Financial Officer have concluded that, as of such date, our disclosure controls and procedures were effective at the reasonable assurance level.

Management’s Annual Report on Internal Control over Financial Reporting; Attestation Report of the Registered Public Accounting Firm.   

Management is responsible for establishing and maintaining adequate internal control over financial reporting for the Company. Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2020. In making this assessment, our management used the criteria set forth in the Internal Control -Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on management's assessment, management has concluded that, as of December 31, 2020, our internal control over financial reporting was effective.

Our independent registered public accounting firm is not required to formally attest to the effectiveness of our internal controls over financials reporting as long as we are an “emerging growth company” pursuant to the provisions of the JOBS Act.

Changes in Internal Control over Financial Reporting

No changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the quarter ended December 31, 2020 that have materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls

Our management, including our principal executive and chief executive officer, does not expect that our disclosure controls and procedures or our internal controls, will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within SiTime have been detected.

Item 9B. Other Information.

Our board of directors amended the Independent Director Compensation Policy for non-employee directors in February 2021 to change the measurement period for the annual limitation on compensation under the policy to each calendar year to reduce the administrative burden and to sync the policy with the information reported for non-employee directors in our proxy statements for our annual meetings.

89

---

 

PART III

Item 10. Directors, Executive Officers and Corporate Governance.

The information required by this item will be set forth under the captions “Election of Directors – Directors and Nominees” and “Election of Directors – Executive Officers, Directors and Director Nominees” in our definitive proxy statement to be filed with the SEC, in connection with our 2021 annual meeting of stockholders (the “Proxy Statement”), which is expected to be filed not later than 120 days after the end of our fiscal year ended December 31, 2020, and is incorporated in this report by reference. Certain information required by this item concerning executive officers is set forth in Part I of this report under the caption “Executive Officers of the Registrant” and is incorporated herein by reference.

Item 405 of Regulation S-K calls for disclosure of any known late filing or failure by an insider to file a report required by Section 16(a) of the Exchange Act. To the extent disclosure for delinquent reports is being made, it can be found under the section entitled “Delinquent Section 16(a) Reports” in the Proxy Statement and is incorporated herein by reference.

We have adopted a Code of Business Conduct and Ethics that applies to all of our officers and employees, including our chief executive officer, chief financial officer, corporate controller, and other employees who perform financial or accounting functions. The Code of Business Conduct and Ethics sets forth the basic principles that guide the business conduct of our employees and is available on our website at www.sitime.com. We have also adopted a Code of Ethics for Senior Financial Officers that specifically applies to our chief executive officer (our principal executive officer) and chief financial officer (our principal financial officer and principal accounting officer). Stockholders may request a free copy of our Code of Ethics for Senior Financial Officers by contacting us at SiTime Corporation, Attention: Investor Relations, 5451 Patrick Henry Drive, Santa Clara, California 95054.

To date, there have been no waivers under our Code of Business Conduct and Ethics or Code of Ethics for Senior Financial Officers. We will disclose on our website amendments to, or waivers from, our Code of Ethics for Senior Financial Officers, in accordance with applicable laws and regulations.

We have a separately designated standing audit committee of our board of directors (the “Audit Committee”) established in accordance with Section 3(a)(58)(A) of the Exchange Act. The members of the Audit Committee are Raman K. Chitkara, Edward H. Frank, and Torsten G. Kreindl. All of such members meet the independence standards established by the Nasdaq listing rules for serving on an audit committee. SEC regulations require us to disclose whether a director qualifying as an “audit committee financial expert” serves on our Audit Committee. Our board of directors has determined that Mr. Chitkara qualifies as an “audit committee financial expert” within the meaning of such regulations. The Audit Committee financial report required by this item will be contained in our Proxy Statement under the caption “Report of the Audit Committee of the Board of Directors” and is hereby incorporated by reference.  

Information regarding procedures by which stockholders may recommend nominees to our board of directors is set forth under the caption “Director Nominations” under “Corporate Governance” in the Proxy Statement.

Item 11. Executive Compensation.

The information required by this item will be set forth under the captions “Executive Compensation” and “Corporate Governance – Non-Employee Director Compensation” in the Proxy Statement and is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

The information required by this item will be set forth under the caption “Security Ownership of Certain Beneficial Owners and Management” and “Executive Compensation – Equity Compensation Plan Information” in the Proxy Statement and is incorporated herein by reference.

90

---

 

Item 13. Certain Relationships and Related Transactions, and Director Independence.

The information required by this item will be set forth under the captions “Certain Relationships and Related Person Transactions” and “Corporate Governance — Director Independence” in the Proxy Statement and is incorporated herein by reference.

Item 14. Principal Accounting Fees and Services.

The information required by this item will be set forth under the caption “Ratification of the Appointment of Independent Registered Public Accountants — Principal Accounting Fees and Services” in the Proxy and is incorporated herein by reference.

91

---

 

PART IV

Item 15. Exhibits, Financial Statement Schedules.

 

 

 

 

The documents listed below are filed (or furnished, as noted) as exhibits to this Annual Report on Form 10-K:

92

---

 

Exhibit Index

 

93

---

 

94

---

 

 

All references in the table above to previously filed documents or descriptions are incorporating those documents and descriptions by reference thereto.

All references to documents filed as exhibits to periodic reports are to periodic reports of SiTime Corporation, SEC File No. 001-39135.

_____________

+Indicates a management contract or compensatory plan.

#In accordance with Item 601(b)(32)(ii) of Regulation S‑K and SEC Release No. 34‑47986, the certifications furnished in Exhibits 32.1 and 32.2 hereto are deemed to accompany this Form 10‑K and will not be deemed “filed” for purposes of Section 18 of the Exchange Act or deemed to be incorporated by reference into any filing under the Exchange Act or the Securities Act of 1933 except to the extent that the Company specifically incorporates it by reference.

Item 16. Form 10-K Summary.

None

95

---

 

SCHEDULE II

VALUATION AND QUALIFYING ACCOUNTS

 

 

96

---

 

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

POWER OF ATTORNEY

KNOW ALL BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Rajesh Vashist and Arthur D. Chadwick, and each of them, as his or her true and lawful attorneys-in-fact and agents, each with the full power of substitution, for him or her and in his or her name, place, or stead, in any and all capacities, to sign any and all amendments to this Report, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or his or her substitute or substitutes, may lawfully do or cause to be done by virtue hereof.

 

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this report has been signed below by the following persons on behalf of the Registrant in the capacities and on the dates indicated.

 

 

 

97