Attached files

file filename
EX-32.2 - EXHIBIT 32.2 - LUNA INNOVATIONS INCexhibit3222018331.htm
EX-32.1 - EXHIBIT 32.1 - LUNA INNOVATIONS INCexhibit3212018331.htm
EX-31.2 - EXHIBIT 31.2 - LUNA INNOVATIONS INCexhibit3122018331.htm
EX-31.1 - EXHIBIT 31.1 - LUNA INNOVATIONS INCexhibit3112018331.htm

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
 _____________________________________ 
FORM 10-Q
  _____________________________________  
ý
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended March 31, 2018
OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                      to                     
COMMISSION FILE NUMBER 000-52008
  _____________________________________ 
LUNA INNOVATIONS INCORPORATED
(Exact name of registrant as specified in its charter)
  _____________________________________  
Delaware
 
54-1560050
(State or Other Jurisdiction of
Incorporation or Organization)
 
(I.R.S. Employer
Identification Number)
301 First Street SW, Suite 200
Roanoke, VA 24011
(Address of Principal Executive Offices)
(540) 769-8400
(Registrant’s Telephone Number, Including Area Code)

   _____________________________________ 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    ý  Yes    ¨  No
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    ý  Yes    ¨  No
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and "emerging growth company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer    o                            Accelerated filer         o    
 
Non-accelerated filer    o (Do not check if a smaller reporting company)        Smaller reporting company ý    

Emerging growth company o    
                    
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    ¨  Yes    ý  No
Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: As of May 8, 2018, there were 27,323,424 shares of the registrant’s common stock outstanding.
 





LUNA INNOVATIONS INCORPORATED
QUARTERLY REPORT ON FORM 10-Q
FOR THE QUARTER ENDED MARCH 31, 2018
TABLE OF CONTENTS



2


PART I. FINANCIAL INFORMATION
 
ITEM 1.
FINANCIAL STATEMENTS




























3


Luna Innovations Incorporated
Consolidated Balance Sheets
 
March 31, 2018
 
December 31, 2017
 
(unaudited)
 
 
Assets
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
33,442,674

 
$
36,981,533

Accounts receivable, net
8,098,703

 
7,869,168

Receivable from sale of HSOR business
4,001,496

 
4,000,976

Contract assets
2,408,930

 
1,778,142

Inventory
6,534,899

 
6,951,110

Prepaid expenses and other current assets
1,086,837

 
1,220,650

Total current assets
55,573,539

 
58,801,579

Long-term contract assets
263,722

 
209,699

Property and equipment, net
3,425,544

 
3,453,741

Intangible assets, net
3,204,843

 
3,237,593

Goodwill
502,000

 
502,000

Other assets
18,024

 
18,024

Total assets
$
62,987,672

 
$
66,222,636

Liabilities and stockholders’ equity
 
 
 
Liabilities:
 
 
 
Current liabilities:
 
 
 
Current portion of long-term debt obligations
$
1,750,000

 
$
1,833,333

Current portion of capital lease obligations
38,145

 
43,665

Accounts payable
2,357,649

 
2,962,863

Accrued liabilities
5,742,777

 
6,557,649

Contract liabilities
1,804,125

 
3,428,625

Total current liabilities
11,692,696

 
14,826,135

Long-term deferred rent
1,148,370

 
1,184,438

Long-term debt obligations
232,084

 
603,007

Long-term capital lease obligations
63,184

 
71,275

Total liabilities
13,136,334

 
16,684,855

Commitments and contingencies

 
 
Stockholders’ equity:
 
 
 
Preferred stock, par value $0.001, 1,321,514 shares authorized, issued and outstanding at March 31, 2018 and December 31, 2017
1,322

 
1,322

Common stock, par value $0.001, 100,000,000 shares authorized, 28,365,549 and 28,354,822 shares issued, 27,162,195 and 27,283,918 shares outstanding at March 31, 2018 and December 31, 2017
29,217

 
29,186

Treasury stock at cost, 1,203,354 and 1,070,904 shares at March 31, 2018 and December 31, 2017
(1,955,787
)
 
(1,649,746
)
Additional paid-in capital
83,744,496

 
83,563,208

Accumulated deficit
(31,967,910
)
 
(32,406,189
)
Total stockholders’ equity
49,851,338

 
49,537,781

Total liabilities and stockholders’ equity
$
62,987,672

 
$
66,222,636

The accompanying notes are an integral part of these consolidated financial statements.

4


Luna Innovations Incorporated
Consolidated Statements of Operations
 
Three Months Ended 
 March 31,
 
2018
 
2017
 
(unaudited)
Revenues:
 
 
 
Technology development
$
4,636,776

 
$
4,236,102

Products and licensing
7,556,396

 
5,850,795

       Total revenues
12,193,172

 
10,086,897

Cost of revenues:
 
 
 
Technology development
3,353,501

 
3,109,467

Products and licensing
3,813,553

 
3,101,045

       Total cost of revenues
7,167,054

 
6,210,512

Gross profit
5,026,118

 
3,876,385

Operating expense:
 
 
 
Selling, general and administrative
3,809,617

 
3,722,170

Research, development and engineering
1,101,488

 
928,772

       Total operating expense
4,911,105

 
4,650,942

Operating income/(loss)
115,013

 
(774,557
)
Other income/(expense):
 
 
 
Investment income
75,912

 

Other (expense)/income
(115
)
 
351

Interest expense
(40,738
)
 
(64,374
)
Total other income/(expense)
35,059

 
(64,023
)
Income/(loss) from continuing operations before income taxes
150,072

 
(838,580
)
Income tax expense
1,396

 
26,690

Net income/(loss) from continuing operations
148,676

 
(865,270
)
Loss from discontinued operations, net of income tax of $0

 
(490,717
)
Net loss from discontinued operations

 
(490,717
)
Net income/(loss)
148,676

 
(1,355,987
)
Preferred stock dividend
64,425

 
34,096

Net income/(loss) attributable to common stockholders
$
84,251

 
$
(1,390,083
)
Net income/(loss) per share from continuing operations:
 
 
 
       Basic
$
0.01

 
$
(0.03
)
       Diluted
$

 
$
(0.03
)
Net loss per share from discontinued operations:
 
 
 
       Basic
$

 
$
(0.02
)
       Diluted
$

 
$
(0.02
)
Net income/(loss) per share attributable to common stockholders:
 
 
 
        Basic
$

 
$
(0.05
)
        Diluted
$

 
$
(0.05
)
Weighted average common shares and common equivalent shares outstanding:
 
 
 
        Basic
27,204,989

 
27,541,356

        Diluted
31,198,833

 
27,541,356

The accompanying notes are an integral part of these consolidated financial statements.

5


Luna Innovations Incorporated
Consolidated Statements of Cash Flows
 
 
Three Months Ended 
 March 31,
 
2018
 
2017
 
(unaudited)
Cash flows provided by/(used in) operating activities
 
 
 
Net income/(loss)
$
148,676

 
$
(1,355,987
)
Adjustments to reconcile net income/(loss) to net cash (used in)/provided by operating activities
 
 

Depreciation and amortization
307,852

 
956,687

Share-based compensation
94,606

 
170,084

Bad debt expense

 
29,671

Change in assets and liabilities
 
 

Accounts receivable
(229,535
)
 
1,824,454

Contract assets
221,386

 
187,448

Inventory
(110,095
)
 
(352,435
)
Other current assets
133,293

 
55,092

Accounts payable and accrued expenses
(1,456,154
)
 
(1,464,847
)
Contract liabilities
(1,650,363
)
 
13,880

Net cash (used in)/provided by operating activities
(2,540,334
)
 
64,047

Cash flows used in investing activities
 
 
 
Acquisition of property and equipment
(129,720
)
 
(157,308
)
Intangible property costs
(113,108
)
 
(133,054
)
Net cash used in investing activities
(242,828
)
 
(290,362
)
Cash flows used in financing activities
 
 
 
Payments on capital lease obligations
(13,611
)
 
(12,697
)
Payments of debt obligations
(458,333
)
 
(458,333
)
Repurchase of common stock
(306,041
)
 

Proceeds from the exercise of options
22,288

 
820

Net cash used in financing activities
(755,697
)
 
(470,210
)
Net decrease in cash and cash equivalents
(3,538,859
)
 
(696,525
)
Cash and cash equivalents—beginning of period
36,981,533

 
12,802,458

Cash and cash equivalents—end of period
$
33,442,674

 
$
12,105,933

Supplemental disclosure of cash flow information
 
 
 
Cash paid for interest
$
39,071

 
$
61,322

Cash paid for income taxes
$
1,396

 
$

Non-cash investing and financing activities
 
 
 
Dividend on preferred stock, 19,823 shares of common stock issuable for the three months ended March 31, 2018 and 2017
$
64,425

 
$
34,096

The accompanying notes are an integral part of these consolidated financial statements.

6


Luna Innovations Incorporated
Notes to Unaudited Consolidated Financial Statements
 
1.
    Basis of Presentation and Significant Accounting Policies
Nature of Operations
Luna Innovations Incorporated (“we,” “Luna Innovations” or the “Company”), headquartered in Roanoke, Virginia, was incorporated in the Commonwealth of Virginia in 1990 and reincorporated in the State of Delaware in April 2003. We are a leader in advanced optical technology, providing unique capabilities in high speed optoelectronics and high performance fiber optic test products for the telecommunications industry and distributed fiber optic sensing for the aerospace and automotive industries. We are organized into two reportable segments, which work closely together to turn ideas into products: our Technology Development segment and our Products and Licensing segment. Our business model is designed to accelerate the process of bringing new and innovative technologies to market. We have a history of net losses from operations beginning in 2005. We have historically managed our liquidity through cost reduction initiatives, debt financings, capital markets transactions and the sale of assets.
Unaudited Interim Financial Information
The accompanying unaudited consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United Stated of America (“U.S. GAAP”) for interim financial statements and Article 10 of Regulation S-X of the Securities Exchange Act of 1934, as amended. Accordingly, they do not include all of the information and footnotes required by U.S. GAAP for annual financial statements. The unaudited consolidated financial statements have been prepared on the same basis as the annual financial statements and in the opinion of management reflect all adjustments, consisting of only normal recurring accruals considered necessary to present fairly our financial position at March 31, 2018, results of operations for the three months ended March 31, 2018 and 2017, and cash flows for the three months ended March 31, 2018 and 2017. The results of operations for the three months ended March 31, 2018, are not necessarily indicative of the results that may be expected for the year ending December 31, 2018. The consolidated balance sheet as of December 31, 2017 was derived from our audited consolidated financial statements.
The consolidated interim financial statements, including our significant accounting policies, should be read in conjunction with the audited Consolidated Financial Statements and the notes thereto for the year ended December 31, 2017, included in our Annual Report on Form 10-K as filed with the Securities and Exchange Commission (“SEC”) on March 21, 2018.
Reclassifications
Certain prior period amounts have been reclassified to conform to current presentation. As a result of the adoption of Accounting Standards Codification ("ASC") 2014-09, Revenue from Contracts with Customers (Topic 606), we presented balances entitled contract assets and contract liabilities within the consolidated balance sheet as well as the impact of the changes in these balances within the consolidated statement of cash flows. We reclassified comparable balances within the December 31, 2017 consolidated balance sheet as well as the impact of changes in those balances within the consolidated statement of cash flows in order to enhance comparability. These reclassifications had no effect on our reported financial condition, results of operations, or cash flows. Any other reclassifications were immaterial to the consolidated interim financial statements taken as a whole.
Fair Value Measurements
Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in the principal or most advantageous market in an orderly transaction between marketplace participants. Various valuation approaches can be used to determine fair value, each requiring different valuation inputs. The following hierarchy classifies the inputs used to determine fair value into three levels:
 
Level 1—Quoted prices for identical instruments in active markets
Level 2—Quoted prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active, and model-derived valuations in which all significant inputs and significant value drivers are observable in active markets
Level 3—Valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are unobservable
The carrying values of cash and cash equivalents, accounts receivable and accounts payable approximate fair value because of the short-term nature of these instruments. The carrying value of our debt approximates fair value, as we consider the floating interest

7


rate on our credit facilities with Silicon Valley Bank ("SVB") to be at market for similar instruments. Certain non-financial assets and liabilities are measured at fair value on a nonrecurring basis in accordance with U.S. GAAP. This includes items such as non-financial assets and liabilities initially measured at fair value in a business combination and non-financial long-lived asset groups measured at fair value for an impairment assessment. In general, non-financial assets including intangible assets and property and equipment are measured at fair value when there is an indication of impairment and are recorded at fair value only when any impairment is recognized.
Net Income/(Loss) Per Share
Basic per share data is computed by dividing our net income/(loss) by the weighted average number of shares outstanding during the period. Diluted per share data is computed by dividing net income/(loss), if applicable, by the weighted average shares outstanding during the period increased to include, if dilutive, the number of additional common share equivalents that would have been outstanding if potential shares of common stock had been issued using the treasury stock method. Diluted per share data would also include the potential common share equivalents relating to convertible securities by application of the if-converted method.
The effect of 4.0 million common stock equivalents (which include outstanding warrants, preferred stock and stock options) are included for the diluted per share data for the three months ended March 31, 2018. The effect of 4.1 million common stock equivalents are not included for the three months ended March 31, 2017, as they are anti-dilutive to earnings per share due to our net loss.
Recently Issued Accounting Pronouncements

Effective January 1, 2018, we adopted Topic 606, Revenue from Contracts with Customers, using the modified retrospective transition method. Under the modified retrospective approach, we apply the standards to new contracts and those that were not completed as of January 1, 2018. For those contracts not completed as of January 1, 2018, this method resulted in a cumulative adjustment to decrease the accumulated deficit in the amount of $0.4 million. Prior periods will not be retrospectively adjusted, but we will maintain dual reporting for the year of initial application in order to disclose the effect on revenue of adopting the new guidance. The cumulative effect of the changes made to our January 1, 2018 unaudited consolidated balance sheet for the adoption of Topic 606 was as follows:

 
Balance at
 
Adjustment for
 
Adjusted balance at
 
December 31, 2017
 
Topic 606
 
January 1, 2018
Assets:
 
 
 
 
 
Contract assets
$
1,778,142

 
$
906,197

 
$
2,684,339

Inventory
$
6,951,110

 
$
(526,306
)
 
$
6,424,804

 
 
 
 
 
 
Liabilities:
 
 
 
 
 
Contract liabilities
$
3,428,625

 
$
25,863

 
$
3,454,488

 
 
 
 
 
 
Stockholders' equity:
 
 
 
 
 
Accumulated deficit
$
(32,406,189
)
 
$
354,028

 
$
(32,052,161
)

Contract assets were formerly reported as unbilled accounts receivable. Contract liabilities were formerly reported as accrued liabilities or deferred revenue. Inventory was also impacted by the adoption of the new guidance. The titles have been changed in the table below to be consistent with accounts currently used under the new standard.


8


 
December 31, 2017
 
As Reported
As Adopted
Accounts receivables, net
$
9,857,009

$
7,869,168

Contract assets

1,778,142

Long-term contract assets

209,699

Accrued liabilities
8,959,935

6,557,649

Contract liabilities

3,428,625

Deferred revenue
1,026,339




Under the new standard, contracts in our Technology Development segment, which primarily provide research services, are not materially impacted upon the adoption of Topic 606 as revenue will continue to be recognized over time using an input model.  Contracts in our Products and Licensing segment generally provide for the following revenue sources: standard product sales, custom product development and sales, product rental, extended warranties, training/service, and certain royalties.  Revenues for this segment are recognized using either the “point in time” or “over time” methods of Topic 606, depending upon the revenue source.  The major change in revenue recognition for the Products and Licensing segment related to custom optoelectronic products which changed from “point in time” to “over time” upon the adoption of Topic 606. Our revenue recognized specific to custom products approximates $10 million annually.   This change results in the acceleration of revenue when compared to existing standards with the cumulative adjustment relating to contracts that are not complete as of December 31, 2017 recognized as an adjustment to opening accumulated deficit on January 1, 2018.   Our revenue for our standard products will continue to be recognized using the "point in time" criteria of Topic 606, and the timing of such revenue recognition is not expected to differ materially from our historical revenue recognition. Other immaterial adjustments related to the Products and Licensing segment that are sometimes offered to customers include discounts on future purchases related to rental agreements, customer rights of return, and volume discounts.

Technology Development Revenues

We perform research and development for U.S. Federal government agencies, educational institutions and commercial organizations. We account for a research contract when a contract has been executed, the rights of the parties are identified, payment terms are identified, the contract has commercial substance, and collectability of the contract price is considered probable. Revenue is earned under cost reimbursable, time and materials and fixed price contracts. Direct contract costs are expensed as incurred.

Our contracts with agencies of the U.S. government are subject to periodic funding by the respective contracting agency. Funding for a contract may be provided in full at inception of the contract or ratably throughout the contract as the services are provided. In evaluating the probability of funding for purposes of assessing collectability of the contract price, we consider our previous experience with our customers, communication with our customers regarding funding status and our knowledge of available funding for the contract or program. If funding is not assessed as probable, revenue recognition is deferred until realization is reasonably assured.

Under the typical payment terms of our U.S. government contracts, the customer pays us either performance-based payments ("PBPs") or progress payments. PBPs, which are typically used in the firm fixed price contracts, are interim payments based on quantifiable measures of performance or on the achievement of specified events or milestones. Progress payments, which are typically used in our cost type contracts, are interim payments based on costs incurred as the work progresses. For our U.S. government cost-type contracts, the customer generally pays us during the performance period for 80%-90% of our actual costs incurred. Because the customer retains a small portion of the contract price until completion of the contract and audit of allowable costs, cost type contracts generally result in revenue recognized in excess of billings which we present as contract assets on the balance sheet. Amounts billed and due from our customers are classified as receivables on the balance sheet. For non-U.S. government contracts, we typically receive interim payments as work progresses, although for some contracts, we may be entitled to receive an advance payment. We recognize a liability for these advance payments and PBPs paid in advance which are in excess of the revenue recognized and present these amounts as contract liabilities on the balance sheet.

To determine the proper revenue recognition method for research and development contracts, we evaluate whether two or more contracts should be combined and accounted for as one single modified contract and whether the combined or single contract should be accounted for as more than one performance obligation. For instances where a contract has options that were bid with the initial contract and awarded at a later date, we combine the options with the original contract when options are awarded. For most of our contracts, the customer contracts for research with multiple milestones that are interdependent. Consequently, the entire contract is accounted for as one performance obligation. The effect of the combined or modified contract on the transaction price and measure of

9


progress for the performance obligation to which it relates, is recognized as an adjustment to revenue (either as an increase in or a reduction of revenue) on a cumulative catch-up basis.

Contract revenue recognition is measured over time as we perform because of continuous transfer of control to the customer. For U.S. government contracts which are typically subject to the Federal Acquisition Regulation ("FAR"), this continuous transfer of control to the customer is supported by clauses in the contract that allow the customer to unilaterally terminate the contract for convenience, pay us for cost incurred plus a reasonable profit and take control of any work in process. From time to time, as part of normal management processes, facts may change, causing revisions to estimated total costs or revenues expected. The cumulative impact of any revisions to estimates and the full impact of anticipated losses on any type of contract are recognized in the period in which they become known.

Because of control transferring over time, revenue is recognized based on the extent of progress towards completion of the performance obligation. The selection of the method to measure progress towards completion requires judgment and is based on the nature of the services to be provided. We generally use the input method, more specifically the cost-to-cost measure of progress for our contracts because it best depicts the transfer of control to the customer which occurs as we incur costs on our contracts. Under the cost-to-cost measure of progress, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. The underlying bases for estimating our contract research revenues are measurable expenses, such as labor, subcontractor costs and materials, and data that are updated on a regular basis for purposes of preparing our cost estimates. Our research contracts generally have a period of performance of six months to three years, and our estimates of contract costs have historically been consistent with actual results. Revisions in these estimates between accounting periods to reflect changing facts and circumstances have not had a material impact on our operating results, and we do not expect future changes in these estimates to be material. The cumulative impact of any revisions to estimates and the full impact of anticipated losses on any type of contract are recognized in the period in which they become known.

Under cost reimbursable contracts, we are reimbursed for costs that are determined to be reasonable, allowable and allocable to the contract and paid a fixed fee representing the profit negotiated between us and the contracting agency. Revenue from cost reimbursable contracts is recognized as costs are incurred plus an estimate of applicable fees earned. We consider fixed fees under cost reimbursable contracts to be earned in proportion to the allowable costs incurred in performance of the contract.

Revenue from time and materials contracts is recognized based on direct labor hours expended at contract billing rates plus other billable direct costs.

Fixed price contracts may include either a product delivery or specific service performance throughout a period. For fixed price contracts that are based on the proportional performance method and involve a specified number of deliverables, we recognize revenue based on the proportion of the cost of the deliverables compared to the cost of all deliverables included in the contract as this method more accurately measures performance under these arrangements. For fixed price contracts that provide for the development and delivery of a specific prototype or product, revenue is recognized based upon the percentage of completion method.

Whether certain costs under government contracts are allowable is subject to audit by the government. Certain indirect costs are charged to contracts using provisional or estimated indirect rates, which are subject to later revision based on government audits of those costs. Management is of the opinion that costs subsequently disallowed, if any, would not likely have a significant impact on revenues recognized for those contracts.

Products and Licensing Revenues

We produce standard and customized products for commercial organizations, educational institutions, and U.S. Federal government agencies. In addition we will also offer extended warranties, product rentals, and services which include testing, training, or repairs for specific products. Customers also pay royalties as agreed based on sales or usage. We account for product and related items when a contract has been executed, the rights of the parties are identified, payment terms are identified, the contract has commercial substance, and collectability of the contract price is considered probable.

To determine the proper revenue recognition method for Products and Licensing contracts, we evaluate whether two or more contracts should be combined and accounted for as one single contract and whether the combined or single contract should be accounted for as more than one performance obligation. We recognize revenue when the performance obligation has been satisfied by transferring the control of the product or service to the customer. For tangible products that contain software that is essential to the tangible product’s functionality, we consider the product and software to be a single performance obligation and recognize revenue accordingly. For contracts with multiple performance obligations, we allocate the contract’s transaction price to each performance obligation based on their relative stand-alone selling prices. In such circumstances, we use the observable price of goods or services

10


which are sold separately in similar circumstances to similar customers. If these prices are not observable, then we will estimate the stand-alone selling price using information that is reasonably available. For the majority of our standard products and services, price list and discount structures related to customer type are available. For products and services that do not have price list and discount structures, we may use one or more of the following: (i) adjusted market assessment approach, (ii) expected cost plus a margin approach, and (iii) residual approach. The adjusted market approach requires us to evaluate the market in which we sell goods or services and estimate the price that a customer in that market would be willing to pay for those goods or services. The expected cost plus margin approach requires us to forecast our expected costs of satisfying the performance obligation and then add a reasonable margin for that good or service. The residual approach decreases the total transaction price by the sum of the observable standalone selling prices if either the company sells the same good or services to different customers for a broad range of amounts or the company has not established a price for the good or service and that good or service has not been sold on a standalone basis. Shipping and handling activities primarily occur after a customer obtains control and are considered fulfillment cost rather than separate performance obligations. Similarly, sales and similar taxes assessed by a governmental authority that are both imposed on and concurrent with a specific revenue-producing transaction and collected by the entity from a customer are excluded from the measurement of the transaction price.

For standard products, we recognize revenue at a point in time when control passes to the customer. Absent substantial product acceptance clauses, this is based on the shipping terms. For custom products that require engineering and development based on customer requirements, we will recognize revenue over time using the output method for any items shipped and any finished goods or work in process that is produced for balances of open sales orders. For any finished goods or work in process that has been produced for the balance of open sales orders we recognize revenue by applying the average selling price for such open order to the lesser of the on hand balance in finished goods or open sales order quantity which we present as a contract asset on the balance sheet. Cost of sales is recognized based on the standard cost of the finished goods and work in process associated with this revenue and inventory balances are reduced accordingly. For extended warranties and product rentals, revenue is recognized over time using the output method based on the time elapsed for the warranty or service period. In the case of warranties, we record a contract liability for amounts billed but that are not recognized until subsequent period. A separate contract liability is recorded for the cost associated with warranty repairs based on our estimate of future expense. For testing services where we are performing testing on an asset the customer controls, revenue is recognized over time by the output method using the performance to date. For training where the customer is receiving the benefit of training as it is occurring and for repairs to a customer controlled asset, revenue is recognized over time by the output method using the performance to date. For royalty revenue, we apply the practical expedient “royalty exception” recognizing revenue based on the royalty agreement which specifies an amount based on sales or minimum amount, whichever is greater.

In some product rental contracts, a customer may be offered a discount on the purchase of an item that would provide for a material right. When a material right has been provided to a customer, a separate performance obligation is established and a portion of the rental revenue will be deferred until the future product is purchased or the option expires. This deferred revenue is recognized as a contract liability on the balance sheet. In certain circumstances we may offer a "right of return" to a distributor of our products, in which case a contract liability is calculated based on the terms of the agreement and recorded as a reduction to revenue. In addition, a contract asset for the rights to recover products from customers and a reduction of cost of sales is also calculated and recorded.

Unfulfilled performance obligations represent amounts expected to be earned on executed contracts. Indefinite delivery and quantity contracts and unexercised options are not reported in total unfulfilled performance obligations. Unfulfilled performance obligations include funded obligations, which is the amount for which money has been directly authorized by the U.S. government and for which a purchase order has been received by a commercial customer, and unfunded obligations, representing firm orders for which funding has not yet been appropriated. The approximate value of our Technology Development segment unfulfilled performance obligations was $21.2 million at March 31, 2018. We expect to satisfy 64% of the performance obligations in 2018, 30% in 2019 and the remaining by 2022. The approximate value of our Products and Licensing segment unfulfilled performance obligations was $4.8 million at March 31, 2018. We expect to satisfy 89% of the performance obligations in 2018 and the remaining by 2023.

We disaggregate our revenue from contracts with customers by geographic locations, customer-type, contract type, timing of recognition, and major categories for each of our segments, as we believe it best depicts how the nature, amount, timing and uncertainty of our revenue and cash flows are affected by economic factors. See details in the tables elow.


11


 
 
Three Months Ended March 31, 2018
 
 
(unaudited)
 
 
Technology Development
Products and Licensing
Total
Total Revenue by Geographic Location
 
 
 
United States
$
4,636,776

$
4,844,835

$
9,481,611

 
Asia

1,426,348

1,426,348

 
Europe

1,186,010

1,186,010

 
Canada, Central and South America

97,203

97,203

 
All Others

2,000

2,000

 
Total
$
4,636,776

$
7,556,396

$
12,193,172

 
 
 
 

 
 
 
 

Total Revenue by Major Customer Type
 

 
Sales to the U.S. government
$
4,605,154

$
390,069

$
4,995,223

 
U.S. direct commercial sales and other
31,622

4,465,349

4,496,971

 
Foreign commercial sales & other

2,700,978

2,700,978

 
Total
$
4,636,776

$
7,556,396

$
12,193,172

 
 
 
 

 
 
 
 

Total Revenue by Contract Type
 

 
Fixed-price contracts
$
2,231,654

$
7,556,396

$
9,788,050

 
Cost-type contracts
2,405,122


2,405,122

 
  Total
$
4,636,776

$
7,556,396

$
12,193,172

 
 
 
 

 
 
 
 

Total Revenue by Timing of Recognition
 

 
Goods transferred at a point in time
$

$
5,874,326

$
5,874,326

 
Goods/services transferred over time
4,636,776

1,682,070

6,318,846

 
Total
$
4,636,776

$
7,556,396

$
12,193,172

 
 
 
 
 
 
 
 
 
 
Total Revenue by Major Products/Services
 
 
 
Technology development
$
4,636,776

$

$
4,636,776

 
Optical test and measurement systems

3,688,010

3,688,010

 
Optical components and sub-assemblies

3,424,641

3,424,641

 
Other

443,745

443,745

 
Total
$
4,636,776

$
7,556,396

$
12,193,172



The following tables summarize the impacts of adopting Topic 606 on our consolidated financial statements for the three months ended March 31, 2018.







12



Consolidated Balance Sheet as of March 31, 2018
 
Impact of changes in accounting policies
 
As Reported
 
Adjustments
 
Balances without adoption of Topic 606
 
(unaudited)
 
(unaudited)
 
(unaudited)
Assets
 
 
 
 
 
Current assets:
 
 
 
 
 
Cash and cash equivalents
$
33,442,674

 
$

 
$
33,442,674

Accounts receivable, net
8,098,703

 

 
8,098,703

Receivable from sale of HSOR business
4,001,496

 

 
4,001,496

Contract assets
2,408,930

 
(1,029,556
)
 
1,379,374

Inventory
6,534,899

 
674,895

 
7,209,794

Prepaid expenses and other current assets
1,086,837

 

 
1,086,837

Total current assets
55,573,539

 
(354,661
)
 
55,218,878

Long-term contract assets
263,722

 

 
263,722

Property and equipment, net
3,425,544

 

 
3,425,544

Intangible assets, net
3,204,843

 

 
3,204,843

Goodwill
502,000

 

 
502,000

Other assets
18,024

 

 
18,024

Total assets
$
62,987,672

 
$
(354,661
)
 
$
62,633,011

Liabilities and stockholders’ equity
 
 
 
 
 
Liabilities:
 
 
 
 
 
Current liabilities:
 
 
 
 
 
Current portion of long-term debt obligations
$
1,750,000

 
$

 
$
1,750,000

Current portion of capital lease obligations
38,145

 

 
38,145

Accounts payable
2,357,649

 

 
2,357,649

Accrued liabilities
5,742,777

 

 
5,742,777

Contract liabilities
1,804,125

 
(24,201
)
 
1,779,924

Total current liabilities
11,692,696

 
(24,201
)
 
11,668,495

Long-term deferred rent
1,148,370

 

 
1,148,370

Long-term debt obligations
232,084

 

 
232,084

Long-term capital lease obligations
63,184

 

 
63,184

Total liabilities
13,136,334

 
(24,201
)
 
13,112,133

Commitments and contingencies
 
 
 
 
 
Stockholders’ equity:
 
 
 
 
 
Preferred stock, par value $0.001, 1,321,514 shares authorized, issued and outstanding at March 31, 2018 and December 31, 2017
1,322

 

 
1,322

Common stock, par value $0.001, 100,000,000 shares authorized, 28,365,549 and 28,354,822 shares issued, 27,162,195 and 27,283,918 shares outstanding at March 31, 2018 and December 31, 2017
29,217

 

 
29,217

Treasury stock at cost, 1,203,354 and 1,070,904 shares at March 31, 2018 and December 31, 2017
(1,955,787
)
 

 
(1,955,787
)
Additional paid-in capital
83,744,496

 

 
83,744,496

Accumulated deficit
(31,967,910
)
 
(330,460
)
 
(32,298,370
)
Total stockholders’ equity
49,851,338

 
(330,460
)
 
49,520,878

Total liabilities and stockholders’ equity
$
62,987,672

 
$
(354,661
)
 
$
62,633,011




13


Consolidated Statement of Operations
 
Impact of changes in accounting policies
 
 
Three Months Ended March 31, 2018
 
 
As reported
 
Adjustments
 
Balances without adoption of Topic 606
 
 
(unaudited)
 
(unaudited)
 
(unaudited)
 
Revenues:
 
 
 
 
 
 
Technology development
$
4,636,776

 
$

 
$
4,636,776

 
Products and licensing
7,556,396

 
(125,777
)
 
7,430,619

 
       Total revenues
12,193,172

 
(125,777
)
 
12,067,395

 
Cost of revenues:

 

 

 
Technology development
3,353,501

 

 
3,353,501

 
Products and licensing
3,813,553

 
(149,345
)
 
3,664,208

 
       Total cost of revenues
7,167,054

 
(149,345
)
 
7,017,709

 
Gross profit
5,026,118

 
23,568

 
5,049,686

 
Operating expense:

 

 

 
Selling, general and administrative
3,809,617

 

 
3,809,617

 
Research, development and engineering
1,101,488

 

 
1,101,488

 
       Total operating expense
4,911,105

 

 
4,911,105

 
Operating income
115,013

 
23,568

 
138,581

 
Other income/(expense):

 

 

 
Investment income
75,912

 

 
75,912

 
Other expense
(115
)
 

 
(115
)
 
Interest expense
(40,738
)
 

 
(40,738
)
 
Total other income
35,059

 

 
35,059

 
Income from continuing operations before income taxes
150,072

 
23,568

 
173,640

 
Income tax expense
1,396

 

 
1,396

 
Net income from continuing operations
148,676

 
23,568

 
172,244

 
Net income
148,676

 
23,568

 
172,244

 
Preferred stock dividend
64,425

 

 
64,425

 
Net income attributable to common stockholders
$
84,251

 
$
23,568

 
$
107,819

 

















14


Effective January 1, 2018, we adopted ASU No. 2016-15, Statement of Cash Flows (Topic 230), which addresses eight specific cash flow issues with the objective of reducing the existing diversity in practice in how cash receipts and cash payments are presented in the statement of cash flows. The adoption of ASU No. 2016-15 did not have a significant impact on our consolidated financial statements.
In February 2016, the FASB issued ASU No. 2016-02, Leases, which requires a lessee to recognize in its statement of financial position an asset and liability for most leases with a term greater than 12 months. Lessees should recognize a liability to make lease payments and a right-of-use asset representing the lessee's right to use the underlying asset for the lease term. The amendment is effective for fiscal years ending after December 15, 2018, including interim periods within those fiscal years. We are currently evaluating the impact the adoption of this standard will have on our consolidated financial statements.

In February 2018, the FASB issued Accounting Standards Update (“ASU”) 2018-02: Income Statement – Reporting Comprehensive Income (Topic 220) (ASU 2018-02). Under current accounting guidance, the income tax effects for changes in income tax rates and certain other transactions are recognized in income from continuing operations resulting in income tax effects recognized in AOCI that do not reflect the current tax rate of the entity (“stranded tax effects”). The new guidance allows the Company the option to reclassify these stranded tax effects to accumulated deficit that relate to the change in the federal tax rate resulting from the passage of the Tax Cuts and Jobs Act. This update is effective for fiscal years beginning after December 15, 2018, including interim periods therein, and early adoption is permitted. We do not expect the adoption of this standard will have a significant impact on our consolidated financial statements.    


2.    Discontinued Operations
On August 9, 2017, we completed the sale of our high speed optical receivers ("HSOR") business, which was part of our Products and Licensing segment, to an unaffiliated third party for an initial purchase price of $33.5 million, of which $29.5 million in cash has been received, and $4.0 million was placed into escrow until December 15, 2018 for potential satisfaction of certain post-closing indemnification obligations (the "Transaction"). The HSOR business was a component of the operations of Advanced Photonix, Inc., which we acquired in May 2015. The HSOR business accounted for 23.1% of revenues and 26.4% of our cost of revenues for the three months ended March 31, 2017.
    We have reported the results of operations of our HSOR business as discontinued operations in our consolidated financial statements. We allocated a portion of the consolidated tax expense to discontinued operations based on the ratio of the discontinued business's loss before allocations.
The key components of net loss from discontinued operations were as follows:
 
 
Three Months Ended 
 March 31,
 
2018
 
2017
 
(unaudited)
Net revenues
$

 
$
3,031,487

Cost of revenues

 
2,232,617

Operating expenses

 
1,289,587

Other expenses

 

Loss before income taxes

 
(490,717
)
Allocated tax expense

 

Net loss from discontinued operations
$

 
$
(490,717
)

For the three months ended March 31, 2017, cash flows used in operating activities for discontinued operations were $0.8 million. For the three months ended March 31, 2017, cash flows used in investing activities for discontinued operations were $0.1 million.

3.
Contract Balances

15


Our contract assets consist of unbilled amounts for technology development contracts as well as custom product contracts. Also included in contract assets are royalty revenue and carrying amounts of right of returned inventory. Long-term contract assets include the fee withholding on cost reimbursable contracts that will not be billed within a year. Contract liabilities include excess billings, subcontractor accruals, warranty expense, extended warranty revenue, right of return refund, and customer deposits.

The following table shows the significant changes in contract balances for the three month period ended March 31, 2018:
 
 Contract Assets
 
 Contract Liabilities
Opening Balance as of January 1, 2018
$
2,894,038

 
$
3,454,488

Revenue recognized that was included in the contract liabilities balance at the beginning of the period

 
(646,180
)
Transferred to payables from contract liabilities recognized at the beginning of the period

 
(1,961,750
)
Increases due to cash received or adjustment of estimates, excluding amounts recognized as revenue during the period

 
957,567

Transferred to receivables from contract assets recognized at the beginning of the period
(1,886,534
)
 

Increases as a result of cumulative catch-up adjustment arising from changes in the estimate of the stage of completion
1,665,148

 

Balance as of March 31, 2018
$
2,672,652

 
$
1,804,125

  

4.
Inventory
Inventory consists of finished goods, work-in-process and raw materials valued at the lower of cost (determined on the first-in, first-out basis) or market. We write down inventory for estimated obsolescence or unmarketable inventory in an amount equal to the difference between the cost of the inventory and the estimated market value based upon assumptions about future demand and market conditions.
Components of inventory were as follows:
 
 
March 31,
2018
 
December 31,
2017
 
(unaudited)
 
 
Finished goods
$
1,734,625

 
$
2,143,953

Work-in-process
390,271

 
578,195

Raw materials
4,410,003

 
4,228,962

Total inventory
$
6,534,899

 
$
6,951,110

 
5.    Accrued Liabilities

Accrued liabilities at March 31, 2018 and December 31, 2017 consisted of the following:

16


 
March 31, 2018
 
December 31, 2017
 
 
(unaudited)
 
 
 
Accrued compensation
$
4,795,181

 
$
5,274,005

 
Income tax payable
403,548

 
403,548

 
Accrued professional fees
119,667

 
117,445

 
Deferred rent
146,267

 
144,741

 
Royalties
75,876

 
290,235

 
Accrued liabilities - other
202,238

 
327,675

 
Total accrued liabilities
$
5,742,777

 
$
6,557,649

 

6.
Debt
Silicon Valley Bank Facility
We currently have a Loan and Security Agreement with SVB (the "Credit Facility") under which, as amended on May 8, 2015, we have a term loan with an original borrowing amount of $6.0 million (the “Original Term Loan”). The Original Term Loan is repayable in 48 monthly installments of $125,000, plus accrued interest payable monthly in arrears, and unless earlier terminated, is scheduled to mature in May 2020. The Original Term Loan carries a floating annual interest rate equal to SVB’s prime rate then in effect plus 2%. We may prepay amounts due under the Original Term Loan at any time, subject to an early termination fee of up to 2% of the amount of prepayment.
In September 2015, we entered into the Waiver and Seventh Loan Modification Agreement, which provided an additional $1 million of available financing for purchases of equipment through December 31, 2015, which we fully borrowed in December 2015 (the "Second Term Loan" and, together with the Original Term Loan, the "Term Loans"). The Second Term Loan also bears interest at a floating prime rate plus 2% and is to be repaid in 35 monthly installments of $27,778 plus accrued interest.
The Credit Facility requires us to maintain a minimum cash balance of $4.0 million and to maintain at each month end a ratio of cash plus 60% of accounts receivable greater than or equal to 1.5 times the outstanding principal of the Term Loans. The Credit Facility also requires us to observe a number of additional operational covenants, including protection and registration of intellectual property rights, and certain customary negative covenants. As of March 31, 2018, we were in compliance with all covenants under the Credit Facility.
Amounts due under the Credit Facility are secured by substantially all of our assets, including intellectual property, personal property and bank accounts. In addition, the Credit Facility contains customary events of default, including nonpayment of principal, interest or other amounts, violation of covenants, material adverse change, an event of default under any subordinated debt documents, incorrectness of representations and warranties in any material respect, bankruptcy, judgments in excess of a threshold amount, and violations of other agreements in excess of a threshold amount. If any event of default occurs SVB may declare due immediately all borrowings under the Credit Facility and foreclose on the collateral. Furthermore, an event of default under the Credit Facility would result in an increase in the interest rate on any amounts outstanding. As of March 31, 2018, there were no events of default on the Credit Facility.
The aggregate balance under the Term Loans at March 31, 2018 and December 31, 2017, was $2.0 million and $2.5 million, respectively. One term loan, with a balance of $0.2 million and $0.3 million as of March 31, 2018 and December 31, 2017, respectively, matures on December 1, 2018. The other term loan, with a balance of $1.8 million and $2.1 million as of March 31, 2018 and December 31, 2017, respectively, matures on May 1, 2019. The effective rate of our Term Loan at March 31, 2018 was 6.5%.
The following table presents a summary of debt outstanding as of March 31, 2018 and December 31, 2017:
 
March 31, 2018
 
December 31, 2017
 
 
(unaudited)
 
 
 
Silicon Valley Bank Term Loan
$
2,000,000

 
$
2,458,333

 
Less: unamortized debt issuance costs
17,916

 
21,993

 
Less: current portion
1,750,000

 
1,833,333

 
Total long-term debt
$
232,084

 
$
603,007

 


17


The schedule of remaining principal payments under our Term Loans as of March 31, 2018 was as follows:
2018 (remaining nine months)
1,375,000

2019
625,000

 
$
2,000,000


7.
Capital Stock and Share-Based Compensation
We recognize share-based compensation expense based upon the fair value of the underlying equity award on the date of the grant. For restricted stock awards and restricted stock units, we recognize expense based upon the price of our underlying stock at the date of the grant. We have elected to use the Black-Scholes-Merton option pricing model to value any option or warrant awards granted. We recognize share-based compensation for such awards on a straight-line basis over the requisite service period of the awards. The risk-free interest rate is based on U.S. Treasury interest rates, the terms of which are consistent with the expected life of the stock options. The expected life and estimated post-employment termination behavior is based upon historical experience of homogeneous groups within our company. We also assume an expected dividend yield of zero for all periods, as we have never paid a dividend on our common stock and do not have any plans to do so in the future.

Stock Options
A summary of the stock option activity for the three months ended March 31, 2018 is presented below:
 
Options Outstanding
 
Options Exercisable
 
Number of
Shares
 
Price per Share
Range
 
Weighted
Average
Exercise
Price
 
Aggregate
Intrinsic
Value (1)
 
Number of
Shares
 
Weighted
Average
Exercise
Price
 
Aggregate
Intrinsic
Value (1)
Balance, January 1, 2018
2,714,561

 
$0.61 - $6.55
 
$
1.88

 
$
2,098,195

 
2,590,030

 
$
1.89

 
$
2,013,034

Granted
73,212

 
$2.32 - $2.67
 
$
2.46

 
 
 
 
 
 
 
 
Exercised
(10,727
)
 
$0.65 - $2.46
 
$
2.08

 
 
 
 
 
 
 
 
Canceled
(499,571
)
 
$1.21 - $6.55
 
$
1.95

 
 
 
 
 
 
 
 
Balance, March 31, 2018
2,277,475

 
$0.61 - $6.23
 
$
1.89

 
$
3,456,823

 
2,150,461

 
$
1.88

 
$
3,302,656

 
(1)
The intrinsic value of an option represents the amount by which the market value of the stock exceeds the exercise price of the option of in-the-money options only. The aggregate intrinsic value is based on the closing price of our common stock on the Nasdaq Capital Market, as applicable, on the respective dates.

At March 31, 2018, the outstanding stock options to purchase an aggregate of 2.3 million shares had a weighted-average remaining contractual term of 4.1 years, and the exercisable stock options to purchase an aggregate of 2.2 million shares had a weighted-average remaining contractual term of 3.8 years. The fair value of shares underlying vested options was $7.0 million at March 31, 2018. The fair value of shares underlying options exercised during the three months ended March 31, 2018 was $32,710.
Restricted Stock and Stock Units

The following table summarizes the value of our unvested restricted stock awards:

18


 
Number of Unvested Shares
 
Weighted Average Grant Date Fair Value
 
Aggregate Value of Unvested Shares
Balance, January 1, 2018
489,698

 
$
1.51

 
$
738,345

Granted

 
$

 

Vested

 
$

 

Repurchased

 
$

 

Forfeitures

 
$

 

Balance, March 31, 2018
489,698

 
$
1.51

 
$
738,345

For the three months ended March 31, 2018 and 2017 we recognized $0.1 million and $0.2 million in share-based compensation expense, respectively, which is included in our selling, general and administrative expense in the accompanying consolidated financial statements. We expect to recognize $0.2 million in share-based compensation expense over the weighted-average remaining service period of 3.7 years for stock options outstanding as of March 31, 2018.
Non-employee Director Deferred Compensation Plan
We maintain a non-employee director deferred compensation plan (the “Deferred Compensation Plan”) that permits our non-employee directors to defer receipt of certain of the compensation that they receive for serving on our board and board committees. The Deferred Compensation Plan has historically permitted the participants to elect to defer cash fees to which they were entitled for board and committee service. For participating directors, in lieu of payment of cash fees, we credit their accounts under the Deferred Compensation Plan with a number of stock units based on the trading price of our common stock as of the date of the deferral. These stock units are vested immediately, although the participating directors do not receive the shares represented by such units until a future qualifying event.
In December 2017, we amended and restated our Deferred Compensation Plan to also permit participating non-employee directors to elect, beginning in 2018, to defer the receipt of some or all of the equity compensation that they receive for board and committee service.
The following is a summary of our stock unit activity under the Deferred Compensation Plan for the three months ended March 31, 2018:
 
Number of Stock Units
 
Weighted Average Grant Date Fair Value per Share
 
Intrinsic Value Outstanding
Balance, January 1, 2018
466,702

 
$1.40
 
$
1,134,086

  Granted
12,200

 
$2.50
 
 
  Forfeitures

 

 
 
  Converted

 

 
 
Balance, March 31, 2018
478,902

 
$1.43
 
$
1,551,642




19



The following table details our equity transactions during the three months ended March 31, 2018:
 
Preferred Stock
 
Common Stock
 
Treasury Stock
 
Additional
Paid-in
Capital
 
Accumulated Deficit
 
Total
 
Shares
 
$
 
Shares
 
$
 
Shares
 
$
 
$
 
 
 
 
Balance at January 1, 2018, as previously reported
1,321,514

 
1,322

 
27,283,918

 
29,186

 
1,070,904

 
(1,649,746
)
 
83,563,208

 
(32,406,189
)
 
49,537,781

Impact of change in accounting policy

 

 

 

 

 

 

 
354,028

 
354,028

As adjusted balance at January 1, 2018
1,321,514

 
1,322

 
27,283,918

 
29,186

 
1,070,904

 
(1,649,746
)
 
83,563,208

 
(32,052,161
)
 
49,891,809

Exercise of stock options

 

 
10,727

 
11

 

 

 
22,277

 

 
22,288

Share-based compensation

 

 

 

 

 

 
94,606

 

 
94,606

Stock dividends to Carilion Clinic(1)

 

 

 
20

 

 

 
64,405

 
(64,425
)
 

Net Income

 

 

 

 

 

 

 
148,676

 
148,676

Purchase of treasury stock

 

 
(132,450
)
 

 
132,450

 
(306,041
)
 

 


(306,041
)
Balance, March 31, 2018
1,321,514

 
1,322

 
27,162,195

 
29,217

 
1,203,354

 
(1,955,787
)
 
83,744,496

 
(31,967,910
)
 
49,851,338


(1)
The stock dividends payable in connection with Carilion Clinic’s Series A Preferred Stock will be issued subsequent to March 31, 2018. For the period from January 12, 2010, the original issue date of the Series A Preferred Stock, through March 31, 2018, the Series A Preferred Stock issued to Carilion has accrued $1,224,755 in dividends. The accrued and unpaid dividends as of March 31, 2018 will be paid by the issuance of 651,516 shares of our common stock upon Carilion’s written request.
Stock Repurchase Program
In May 2016, our board of directors authorized us to repurchase up to $2.0 million of our common stock through May 31, 2017. As of May 31, 2017, we had repurchased a total of 205,500 shares for an aggregate purchase price of $0.2 million under this stock repurchase program, after which this stock repurchase program expired.

In September 2017, our board of directors re-instituted the stock repurchase program and authorized us to repurchase up to $2.0 million of our common stock through September 19, 2018. Our stock repurchase program does not obligate us to acquire any specific number of shares. Under the program, shares may be repurchased in privately negotiated or open market transactions, including under plans complying with Rule 10b5-1 under the Securities Exchange Act of 1934, as amended. As of March 31, 2018, we had repurchased a total of 565,629 shares for an aggregate purchase price of $1.1 million under this stock repurchase program. We currently maintain all repurchased shares under these stock repurchase programs as treasury stock.

8.
Operating Segments
Our operations are divided into two operating segments—“Technology Development” and “Products and Licensing”.
The Technology Development segment provides applied research to customers in our areas of focus. Our engineers and scientists collaborate with our network of government, academic and industry experts to identify technologies and ideas with promising market potential. We then compete to win fee-for-service contracts from government agencies and industrial customers who seek innovative solutions to practical problems that require new technology. The Technology Development segment derives its revenues primarily from services.
The Products and Licensing segment derives its revenues from product sales, funded product development and technology licenses.

20


Through March 31, 2018, our Chief Executive Officer and his direct reports collectively represented our chief operating decision makers, and they evaluated segment performance based primarily on revenues and operating income or loss. The accounting policies of our segments are the same as those described in the summary of significant accounting policies (see Note 1 to our Financial Statements, “Organization and Summary of Significant Accounting Policies,” presented in our Annual Report on Form 10-K as filed with the SEC on March 21, 2018).

The table below presents revenues and operating income/(loss) for reportable segments:
 
 
Three Months Ended 
 March 31,
 
 
2018
 
2017
 
 
(unaudited)
 
Revenues:
 
 
 
 
Technology development
$
4,636,776

 
$
4,236,102

 
Products and licensing
7,556,396

 
5,850,795

 
Total revenues
$
12,193,172

 
$
10,086,897

 
Technology development operating income/(loss)
$
99,234

 
$
(293,014
)
 
Products and licensing operating income/(loss)
15,779

 
(481,543
)
 
Total operating income/(loss)
$
115,013

 
$
(774,557
)
 
Depreciation, technology development
$
93,600

 
$
88,220

 
Depreciation, products and licensing
$
64,317

 
$
335,053

 
Amortization, technology development
$
37,206

 
$
40,436

 
Amortization, products and licensing
$
112,729

 
$
492,978

 
Products and licensing depreciation includes amounts from discontinued operations of $0.2 million for the three months ended March 31, 2017. Products and licensing amortization includes amounts from discontinued operations of $0.4 million for the three months ended March 31, 2017.
The table below presents assets for reportable segments:
 
 
March 31,
2018
 
December 31,
2017
 
(unaudited)
 
 
Total segment assets:
 
 
 
Technology development
$
29,318,578

 
$
32,011,084

Products and licensing
33,669,094

 
34,211,552

Total assets
$
62,987,672

 
$
66,222,636

Property plant and equipment, and intangible assets, technology development
$
2,268,998

 
$
2,361,663

Property plant and equipment, and intangible assets, products and licensing
$
4,863,389

 
$
4,831,671



The U.S. government accounted for 41% and 48% of total consolidated revenues for the three months ended March 31, 2018 and 2017, respectively.
International revenues (customers outside the United States) accounted for 22% and 18% of total consolidated revenues for the three months ended March 31, 2018 and 2017, respectively. No single country, outside of the United States, represented more than 10% of total revenues in the three months ended March 31, 2018 and 2017.

9.
Contingencies and Guarantees
We are from time to time involved in certain legal proceedings in the ordinary course of conducting our business. While the ultimate liability pursuant to these actions cannot currently be determined, we believe it is not reasonably possible that these legal proceedings will have a material adverse effect on our financial position or results of operations.

21


In March 2018, we received a notice of claim (the "Claim") from Macom Technology Solutions, Inc. ("Macom"), who acquired our HSOR business in August 2017 pursuant to an asset purchase agreement. Under the asset purchase agreement, we agreed to indemnify Macom for certain matters, including, among other things, the collection of accounts receivable from certain major customers, and placed $4.0 million of the purchase price into an escrow account for the potential settlement of any valid indemnity claims. The notice of claim received from Macom totaled $2.0 million under various indemnity provisions. We have disputed Macom's assertion of right to payment for the matters described in the Claim. It is uncertain what amount, if any, will be owed in settlement of the Claim.
We executed a non-cancelable purchase order totaling $0.5 million in the fourth quarter of 2017 and a non-cancelable purchase order totaling $1.1 million in the first quarter of 2018 for multiple shipments of tunable lasers to be delivered over an 18-month period. At March 31, 2018, approximately $1.3 million of these commitments remained and is expected to be delivered by July 30, 2019.
We have entered into indemnification agreements with our officers and directors, to the extent permitted by law, pursuant to which we have agreed to reimburse the officers and directors for legal expenses in the event of litigation and regulatory matters. The terms of these indemnification agreements provide for no limitation to the maximum potential future payments. We have a directors and officers insurance policy that may, in certain instances, mitigate the potential liability and payments.

22


ITEM 2.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

CAUTIONARY NOTE REGARDING FORWARD LOOKING STATEMENTS
This Quarterly Report on Form 10-Q, including the sections entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Quantitative and Qualitative Disclosures About Market Risk” under Items 2 and 3, respectively, of Part I of this report, and the section entitled “Risk Factors” under Item 1A of Part II of this report, may contain  forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended, and Section 27A of the Securities Act of 1933, as amended. All statements other than statements of historical fact are “forward-looking statements” for purposes of these statutes, including those relating to future events or our future financial performance. In some cases, you can identify these forward looking statements by words such as “intends,” “will,” “plans,” “anticipates,” “expects,” “may,” “might,” “estimates,” “believes,” “should,” “projects,” “predicts,” “potential” or “continue,” or the negative of those words and other comparable words, and other words or terms of similar meaning in connection with any discussion of future operating or financial performance. Similarly, statements that describe our business strategy, goals, prospects, opportunities, outlook, objectives, plans or intentions are also forward-looking statements. These statements are only predictions and may relate to, but are not limited to, expectations of future operating results or financial performance, capital expenditures, introduction of new products, regulatory compliance and plans for growth and future operations, as well as assumptions relating to the foregoing.
These statements are based on current expectations and assumptions regarding future events and business performance and involve known and unknown risks, uncertainties and other factors that may cause actual events or results to be materially different from any future events or results expressed or implied by these statements. These factors include those set forth in the following discussion and within Item 1A “Risk Factors” of this Quarterly Report on Form 10-Q and elsewhere within this report.
The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our consolidated financial statements and the related notes to those statements included elsewhere in this report. In addition to historical financial information, the following discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. Our actual results and timing of selected events may differ materially from those anticipated in these forward-looking statements as a result of many factors, including those discussed under “Risk Factors” and elsewhere in this report.

Overview of Our Business

We are a leader in advanced optical technology, providing unique capabilities in high speed optoelectronics and high performance fiber optic test products for the telecommunications industry and distributed fiber optic sensing for the aerospace and automotive industries. Our distributed fiber optic sensing products provide critical stress, strain and temperature information to designers and manufacturers working with advanced materials. Our custom optoelectronic products are sold to scientific instrumentation manufacturers for various applications such as metrology, missile guidance, flame monitoring, and temperature sensing. In addition, we provide applied research services, typically under research programs funded by the U.S. government, in areas of advanced materials, sensing, and healthcare applications. Our business model is designed to accelerate the process of bringing new and innovative products to market. We use our in-house technical expertise across a range of technologies to perform applied research services for companies and for government funded projects. We continue to invest in product development and commercialization, which we anticipate will lead to increased product sales growth.
We are organized into two main business segments, the Products and Licensing segment and the Technology Development segment. Our Products and Licensing segment develops, manufactures and markets fiber optic sensing products, as well as test & measurement products, and also conducts applied research in the fiber optic sensing area for both corporate and government customers. Our Products and Licensing segment revenues represented 62% and 58% of our total revenues for the three months ended March 31, 2018 and 2017, respectively. The approximate value of our Products and Licensing segment backlog was $4.8 million at March 31, 2018 and $6.9 million at December 31, 2017. The backlog at March 31, 2018 is expected to be recognized as revenue in the future as follows:
 
2018
2019
2020
2021
2022 and beyond
Total
Products and Licensing
$
4,259,060

$
368,674

$
122,252

$
22,328

$
22,188

$
4,794,502


23


The Technology Development segment performs applied research principally in the areas of sensing and instrumentation, advanced materials and health sciences. This segment comprised 38% and 42% of our total revenues for the three months ended March 31, 2018 and 2017, respectively. Most of the government funding for our Technology Development segment is derived from the Small Business Innovation Research ("SBIR") program coordinated by the U.S. Small Business Administration ("SBA"). The Technology Development segment revenues have historically accounted for a large portion of our total revenues, and we expect that they will continue to represent a significant portion of our total revenues for the foreseeable future. The Technology Development segment revenues were $4.6 million and $4.2 million for the three months ended March 31, 2018 and 2017, respectively. Within the Technology Development segment, we have historically had a backlog of contracts for which work has been scheduled, but for which a specified portion of work has not yet been completed. We define backlog as the dollar amount of obligations payable to us under negotiated contracts upon completion of a specified portion of work that has not yet been completed, exclusive of revenues previously recognized for work already performed under these contracts, if any. Total backlog includes funded backlog, which is the amount for which money has been directly authorized by the U.S. government and for which a purchase order has been received by a commercial customer, and unfunded backlog, representing firm orders for which funding has not yet been appropriated. Indefinite delivery and quantity contracts and unexercised options are not reported in total backlog. The approximate value of our Technology Development segment backlog was $21.2 million at March 31, 2018 and $23.5 million at December 31, 2017. The backlog at March 31, 2018 is expected to be recognized as revenue in the future as follows:
Technology Development
2018
2019
2020
2021
2022 and beyond
Total
  Funded
$
12,415,973

$
3,176,975

$

$

$

$
15,592,948

  Unfunded
$
1,235,824

$
3,114,650

$
582,094

$
462,999

$
231,499

$
5,627,066

Revenues from product sales are mostly derived from the sales of our optoelectronics, sensing and test & measurement products that make use of light-transmitting optical fibers, or fiber optics. We continue to invest in product development and commercialization, which we anticipate will lead to increased product sales growth. Although we have been successful in licensing certain technology in past years, we do not expect license revenues to represent a significant portion of future revenues. Over time, however, we do intend to gradually increase such revenues. In the near term, we expect revenues from product to continue to be primarily in areas associated with our optoelectronics, fiber optic, test & measurement and sensing platforms. In the long term, we expect that revenues from product sales will represent a larger portion of our total revenues and that as we develop and commercialize new products, these revenues will reflect a broader and more diversified mix of products.
We may also grow our business in part through acquisitions of additional companies and complementary technologies, which could cause us to incur transaction expenses, amortization or write-offs of intangible assets and other acquisition-related expenses.
Description of Revenues, Costs and Expenses
Revenues
We generate revenues from technology development, product sales and commercial product development and licensing activities. We derive Technology Development segment revenues from providing research and development services to third parties, including government entities, academic institutions and corporations, and from achieving milestones established by some of these contracts and in collaboration agreements. In general, we complete contracted research over periods ranging from six months to three years, and recognize these revenues over the life of the contract as costs are incurred. The Technology Development segment revenues represented 38% and 42% of total revenues for the three months ended March 31, 2018 and 2017, respectively.
The Products and Licensing segment revenues reflect amounts that we receive from sales of our products or development of products for third parties and, to a lesser extent, fees paid to us in connection with licenses or sub-licenses of certain patents and other intellectual property, and represented 62% and 58% of our total revenues for the three months ended March 31, 2018 and 2017, respectively.
Cost of Revenues
Cost of revenues associated with our Technology Development segment revenues consists of costs associated with performing the related research activities including direct labor, amounts paid to subcontractors and overhead allocated to Technology Development segment activities.

24


Cost of revenues associated with our Products and Licensing segment revenues consists of license fees for use of certain technologies, product manufacturing costs including all direct material and direct labor costs, amounts paid to our contract manufacturers, manufacturing, shipping and handling, provisions for product warranties, and inventory obsolescence as well as overhead allocated to each of these activities.

Operating Expense
Operating expense consists of selling, general and administrative expenses, as well as expenses related to research, development and engineering, depreciation of fixed assets and amortization of intangible assets. These expenses also include compensation for employees in executive and operational functions including certain non-cash charges related to expenses from option grants, facilities costs, professional fees, salaries, commissions, travel expense and related benefits of personnel engaged in sales, product management and marketing activities, costs of marketing programs and promotional materials, salaries, bonuses and related benefits of personnel engaged in our own research and development beyond the scope and activities of our Technology Development segment, product development activities not provided under contracts with third parties, and overhead costs related to these activities.
Investment Income
Investment income consists of amounts earned on our cash equivalents. We sweep on a daily basis a portion of our cash on hand into a fund invested in U.S. government obligations.
Interest Expense
Interest expense is composed of interest paid under our term loans as well as interest accrued on our capital lease obligations.
Critical Accounting Policies and Estimates
Our discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires us to make estimates, assumptions and judgments that affect the amounts reported in our financial statements and the accompanying notes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or judgments.
Our critical accounting policies are described in the Management’s Discussion and Analysis section and the notes to our audited consolidated financial statements previously included in our Annual Report on Form 10-K for the year ended December 31, 2017, as filed with the Securities and Exchange Commission ("SEC") on March 21, 2018. Significant changes to our critical accounting estimates as a result of adopting Topic 606 are discussed in Note 1 of our unaudited consolidated financial statements included in this Quarterly Report on Form 10Q.

Results of Operations
Three Months Ended March 31, 2018 Compared to Three Months Ended March 31, 2017
Revenues
 
Three Months Ended March 31,
 
 
 
 
 
2018
 
2017
 
$ Difference
 
% Difference
Revenues:
 
 
 
 
 
 
 
Technology development
$
4,636,776

 
$
4,236,102

 
$
400,674

 
9
%
Products and licensing
7,556,396

 
5,850,795

 
1,705,601

 
29
%
Total revenues
$
12,193,172

 
$
10,086,897

 
$
2,106,275

 
21
%
Revenues from our Technology Development segment for the three months ended March 31, 2018, increased $0.4 million, or 9%, to $4.6 million compared to $4.2 million for the three months ended March 31, 2017. The increase in Technology Development segment revenues continues a growth trend experienced over the past two years largely driven by

25


successes in Phase 2 SBIR awards. The increase for the three months ended March 31, 2018, compared to the three months ended March 31, 2017, was realized primarily in our optical systems research group. As Phase 2 contracts generally have a performance period of a year or more, we currently expect revenues to remain at a similar level for the near term.
Our Products and Licensing segment included revenues from sales of test & measurement systems, primarily representing sales of our ODiSI, Optical Vector Analyzer, and Optical Backscatter Reflectometer platforms, optical components and sub-assemblies and sales of Terahertz sensing systems. Products and Licensing segment revenues for the three months ended March 31, 2018 increased $1.7 million, or 29%, to $7.6 million compared to $5.9 million for the three months ended March 31, 2017. The increase for the three months ended March 31, 2018, compared to the three months ended March 31, 2017, was realized primarily in our ODiSI, Optical Backscatter Reflectometer, and tunable laser products which was reflective of growth in high speed networks and data center applications in addition to expanding use of composite materials and the need for improved means of testing their structural integrity. The change in revenue for Products and Licensing segment also includes an increase in revenue of $0.1 million for the three months ended March 31, 2018 related to the adoption of Topic 606, Revenue from Contracts with Customers.

Cost of Revenues and Gross Profit 
 
Three Months Ended March 31,
 
 
 
 
 
2018
 
2017
 
$ Difference
 
% Difference
Cost of revenues:
 
 
 
 
 
 
 
Technology development
$
3,353,501

 
$
3,109,467

 
$
244,034

 
8
%
Products and licensing
3,813,553

 
3,101,045

 
712,508

 
23
%
Total cost of revenues
7,167,054

 
6,210,512

 
956,542

 
15
%
Gross profit
$
5,026,118

 
$
3,876,385

 
$
1,149,733

 
30
%
The cost of Technology Development segment revenues for the three months ended March 31, 2018, increased $0.2 million, or 8%, to $3.4 million compared to $3.1 million for the three months ended March 31, 2017. The increase in cost of Technology Development segment revenues was attributable to additional headcount and the increased utilization of subcontractors to support the growth in our research contracts.
The cost of revenues associated with our Products and Licensing segment increased by $0.7 million, or 23%, to $3.8 million for the three months ended March 31, 2018, compared to $3.1 million for the three months ended March 31, 2017. This increase in cost of revenues resulted from an increase in sales volume. Our overall gross margin increased to 41% for the three months ended March 31, 2018, compared to 38% for the three months ended March 31, 2017 primarily as a result of our revenue mix, with product sales representing a larger portion of our revenues during the three months ended March 31, 2018. The change in cost for Products and Licensing segment also includes an increase in cost of $0.1 million for the three months ended March 31, 2018 related to the adoption of Topic 606, Revenue from Contracts with Customers.
Operating Expense
 
Three Months Ended March 31,
 
 
 
 
 
2018
 
2017
 
$ Difference
 
% Difference
Operating expense:
 
 
 
 
 
 
 
Selling, general and administrative
$
3,809,617

 
$
3,722,170

 
$
87,447

 
2
%
Research, development and engineering
1,101,488

 
928,772

 
172,716

 
19
%
Total operating expense
$
4,911,105

 
$
4,650,942

 
$
260,163

 
6
%
Our selling, general and administrative expense increased $0.1 million, or 2%, to $3.8 million for the three months ended March 31, 2018 compared to $3.7 million for the three months ended March 31, 2017.
Research, development and engineering expense increased $0.2 million, or 19%, to $1.1 million for the three months ended March 31, 2018, compared to $0.9 million for the three months ended March 31, 2017 due to increased development costs associated with our ODiSI and Terahertz instruments.

26


Interest Expense
Interest expense was less than $0.1 million for both the three months ended March 31, 2018 and 2017. During the three months ended March 31, 2018, our average outstanding balance on our term loans was $2.2 million as compared to $4.0 million for the three months ended March 31, 2017.
Net Income/(Loss) From Continuing Operations
During the three months ended March 31, 2018, we recognized income from continuing operations before income taxes of $0.2 million compared to a loss from continuing operations before income taxes of $0.8 million for the three months ended March 31, 2017. After tax, our net income from continuing operations was $0.1 million for the three months ended March 31, 2018, compared to a net loss from continuing operations of $0.9 million for the three months ended March 31, 2017.
Net Loss From Discontinued Operations
For the three months ended March 31, 2017, our net loss from discontinued operations of $0.5 million represented the operating results of our high speed optical receivers business, which was sold in August 2017. There were no results from discontinued operations for the three months ended March 31, 2018.


Liquidity and Capital Resources
At March 31, 2018, our total cash and cash equivalents were $33.4 million.

We currently have a Loan and Security Agreement with Silicon Valley Bank ("SVB") under which we have two term loans with an aggregate original borrowing amount of $7.0 million. As of March 31, 2018, these term loans had an aggregate outstanding principal balance of $2.0 million. One term loan, with a balance of $0.2 million as of March 31, 2018, matures on December 1, 2018. The other term loan, with a balance of $1.8 million as of March 31, 2018, matures on May 1, 2019. The term loans bear interest at a floating rate of prime plus 2%. We may prepay amounts due under the term loans at any time, subject to prepayment penalties of up to 2% of the amount of prepayment. Amounts due under the term loans are secured by substantially all of our assets, including intellectual property, personal property and bank accounts. The term loans contain customary events of default, including nonpayment of principal, interest or other amounts, violation of covenants, material adverse change, an event of default under any subordinated debt documents, incorrectness of representations and warranties in any material respect, bankruptcy, judgments in excess of a threshold amount, and violations of other agreements in excess of a threshold amount. If any event of default occurs, SVB may declare due immediately all borrowings under the credit facility and foreclose on the collateral. Furthermore, an event of default under the credit facility would result in an increase in the interest rate on any amounts outstanding. As of March 31, 2018, we were in compliance with all covenants under the Loan and Security Agreement.

We believe that our cash balance as of March 31, 2018 will provide adequate liquidity for us to meet our working capital needs over the next twelve months. Additionally, we believe that should we have the need for increased capital spending to support our planned growth, we will be able to fund such growth through either third-party financing on competitive market terms or through our available cash.
Discussion of Cash Flows
Recent Activity 
 
Three Months Ended March 31,
 
 
 
2018
 
2017
 
$ Difference
Net cash (used in)/provided by operating activities
$
(2,540,334
)
 
$
64,047

 
$
(2,604,381
)
Net cash used in investing activities
(242,828
)
 
(290,362
)
 
47,534

Net cash used in financing activities
(755,697
)
 
(470,210
)
 
(285,487
)
Net decrease in cash and cash equivalents
$
(3,538,859
)
 
$
(696,525
)
 
$
(2,842,334
)

27


During the first three months of 2018, operations used $2.5 million of cash, as compared to the same period in 2017 in which operations provided $0.1 million of cash. During the first three months of 2018, net cash used in operating activities consisted of our net income of $0.1 million, which included non-cash charges for depreciation and amortization of $0.3 million and share-based compensation of $0.1 million, and a net cash outflow of $3.1 million from changes in working capital. The change is working capital included a decrease in contract liabilities of $1.7 million as a result of the payment of $1.6 million in outstanding claims for excess billed amounts on government research contracts.
During the first three months of 2017, the $0.1 million of net cash provided by operating activities consisted of our net loss of $1.4 million which included non-cash charges for depreciation and amortization of $1.0 million and share-based compensation of $0.2 million. Additionally, changes in working capital resulted in a net cash inflow of $0.3 million, principally driven by a reduction in accounts receivable of $1.8 million, partially offset by a decrease in accounts payable and accrued expenses of $1.5 million and an increase in inventory of $0.4 million.
Our cash used in investing activities for the three months ended March 31, 2018 and 2017 included purchases of equipment and capitalized costs associated with the prosecution of patents. Cash used in investing activities for the three months ended March 31, 2018 included $0.1 million of fixed asset additions and $0.1 million of capitalized intellectual property costs. Cash used in investing activities for the three months ended March 31, 2017 included fixed asset additions of $0.2 million and capitalized intellectual property costs of $0.1 million.
Net cash used in financing activities during the three months ended March 31, 2018 and 2017 included long term debt repayments of $0.5 million. During the three months ended March 31, 2018 we also repurchased $0.3 million of our common stock on the open market.
Off-Balance Sheet Arrangements
We have no material off-balance sheet arrangements as defined in Regulation S-K Item 303(a)(4)(ii).

28



ITEM 3.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Market risk represents the risk of loss that may impact our financial position due to adverse changes in financial market prices and rates. We do not hold or issue financial instruments for trading purposes or have any derivative financial instruments. Our exposure to market risk is limited to interest rate fluctuations due to changes in the general level of U.S. interest rates.
Interest Rate Risk
We do not use derivative financial instruments as a hedge against interest rate fluctuations, and, as a result, interest income earned on our cash and cash equivalents and short-term investments is subject to changes in interest rates. However, we believe that the impact of these fluctuations does not have a material effect on our financial position due to the immediately available liquidity or short-term nature of these financial instruments.
We are exposed to interest rate fluctuations as a result of our term loans with SVB having a variable interest rate. We do not currently use derivative instruments to alter the interest rate characteristics of our debt. For the principal amount of $2.0 million outstanding under the term loans as of March 31, 2018, a change in the interest rate by one percentage point for one year would result in a change in our annual interest expense of $12,000.
Although we believe that this measure is indicative of our sensitivity to interest rate changes, it does not adjust for potential changes in our credit quality, composition of our balance sheet and other business developments that could affect our interest rate exposure. Accordingly, no assurances can be given that actual results would not differ materially from the potential outcome simulated by this estimate.
Foreign Currency Exchange Rate Risk
As of March 31, 2018, all payments made under our research contracts have been denominated in U.S. dollars. Our product sales to foreign customers are also generally denominated in U.S. dollars, and we generally do not receive payments in foreign currency. As such, we are not directly exposed to significant currency gains or losses resulting from fluctuations in foreign exchange rates.

29


ITEM 4.
CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
We maintain “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act"), which are controls and other procedures that are designed to provide reasonable assurance that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures also include, without limitation, controls and procedures designed to provide reasonable assurance that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure.
Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures. In addition, the design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, controls may become inadequate because of changes in conditions, or the degree of compliance with policies or procedures may deteriorate. Because of the inherent limitations in a control system, misstatements due to error or fraud may occur and not be detected.
Under the supervision and with the participation of our management, including our principal executive officer and our principal financial officer, we evaluated the effectiveness of the design and operation of our disclosure controls and procedures as of the end of the period covered by this Quarterly Report. Based on this evaluation, our principal executive officer and our principal financial officer have concluded that, as of March 31, 2018, our disclosure controls and procedures were effective.

Changes in Internal Control over Financial Reporting
As a result of our adoption of the new revenue standard (Topic 606), we implemented controls to ensure adequate evaluation of contracts and assessment of the impact of the new accounting standard related to revenue recognition on our financial statements to facilitate its adoption on January 1, 2018. There were not any significant changes to our internal control over financial reporting due to the adoption of the new standard, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f) during the period covered by this Quarterly Report or in other factors that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

30


PART II. OTHER INFORMATION
 
ITEM 1.
LEGAL PROCEEDINGS

None.

ITEM 1A.
RISK FACTORS
You should carefully consider the risks described below before deciding whether to invest in our common stock. The risks described below are not the only ones we face. Additional risks not presently known to us or that we currently believe are immaterial may also impair our business operations and financial results. If any of the following risks actually occurs, our business, financial condition or results of operations could be adversely affected. In such case, the trading price of our common stock could decline and you could lose all or part of your investment. Our filings with the SEC also contain forward-looking statements that involve risks or uncertainties. Our actual results could differ materially from those anticipated or contemplated by these forward-looking statements as a result of a number of factors, including the risks we face described below, as well as other variables that could affect our operating results. Past financial performance should not be considered to be a reliable indicator of future performance, and investors should not use historical trends to anticipate results or trends in future periods.
RISKS RELATING TO OUR BUSINESS GENERALLY
Our technology is subject to a license from Intuitive Surgical, Inc., which is revocable in certain circumstances. Without this license, we cannot continue to market, manufacture or sell our fiber-optic products.
As a part of the sale of certain assets to Intuitive Surgical, Inc. ("Intuitive") in 2014, we entered into a license agreement with Intuitive pursuant to which we received rights to use all of our transferred technology outside the field of medicine and in respect of our existing non-shape sensing products in certain non-robotic medical fields. This license back to us is revocable if after notice and certain time periods, we were to (i) challenge the validity or enforceability of the transferred patents and patent applications, (ii) commercialize our fiber optical shape sensing and localization technology in the field of medicine (except to perform on a development and supply project for Hansen Medical, Inc.), (iii) violate our obligations related to our ability to sublicense in the field of medicine or (iv) violate our confidentiality obligations in a manner that advantages a competitor in the field of medicine and not cure such violation. Maintaining this license is necessary for us to conduct our fiber-optic products business, both for our telecom products and our ODiSI sensing products. If this license were to be revoked by Intuitive, we would no longer be able to market, manufacture or sell these products which could have a material adverse effect on our operations.
We depend on third-party vendors for specialized components in our manufacturing operations, making us vulnerable to supply shortages and price fluctuations that could harm our business.
We primarily rely on third-party vendors for the manufacture of the specialized components used in our products. The highly specialized nature of our supply requirements poses risks that we may not be able to locate additional sources of the specialized components required in our business. For example, there are few manufacturers who produce the special lasers used in our optical test equipment. Our reliance on these vendors subjects us to a number of risks that could negatively affect our ability to manufacture our products and harm our business, including interruption of supply. Although we are now manufacturing tunable lasers in low-rate initial production, we expect our overall reliance on third-party vendors to continue. Any significant delay or interruption in the supply of components, or our inability to obtain substitute components or materials from alternate sources at acceptable prices and in a timely manner could impair our ability to meet the demand of our customers and could harm our business.
We depend upon outside contract manufacturers for a portion of the manufacturing process for some of our products. Our operations and revenue related to these products could be adversely affected if we encounter problems with these contract manufacturers.
Many of our products are manufactured internally. However, we also rely upon contract manufacturers to produce the finished portion of some of our optoelectronic components and certain lasers. Our reliance on contract manufacturers for these

31


products makes us vulnerable to possible capacity constraints and reduced control over delivery schedules, manufacturing yields, manufacturing quality control and costs. If the contract manufacturer for our products were unable or unwilling to manufacture our products in required volumes and at high quality levels or to continue our existing supply arrangement, we would have to identify, qualify and select an acceptable alternative contract manufacturer or move these manufacturing operations to internal manufacturing facilities. An alternative contract manufacturer may not be available to us when needed or may not be in a position to satisfy our quality or production requirements on commercially reasonable terms, including price. Any significant interruption in manufacturing our products would require us to reduce the supply of products to our customers, which in turn would reduce our revenue, harm our relationships with the customers of these products and cause us to forego potential revenue opportunities.
As a provider of contract research to the U.S. government, we are subject to federal rules, regulations, audits and investigations, the violation or failure of which could adversely affect our business.
We must comply with and are affected by laws and regulations relating to the award, administration and performance of U.S. government contracts. Government contract laws and regulations affect how we do business with our government customers and, in some instances, impose added costs on our business. A violation of a specific law or regulation could result in the imposition of fines and penalties, termination of our contracts or debarment from bidding on contracts. In some instances, these laws and regulations impose terms or rights that are more favorable to the government than those typically available to commercial parties in negotiated transactions. For example, the U.S. government may terminate any of our government contracts and, in general, subcontracts, at their convenience, as well as for default based on performance.
In addition, U.S. government agencies, including the Defense Contract Audit Agency and the Department of Labor, routinely audit and investigate government contractors. These agencies review a contractor’s performance under its contracts, cost structure and compliance with applicable laws, regulations and standards. The U.S. government also may review the adequacy of, and a contractor’s compliance with, its internal control systems and policies, including the contractor’s purchasing, property, estimating, compensation and management information systems. Any costs found to be improperly allocated to a specific contract will not be reimbursed, while such costs already reimbursed must be refunded. If an audit uncovers the inclusion of certain claimed costs deemed to be expressly unallowable, or improper or illegal activities, we may be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, fines and suspension or prohibition from doing business with the U.S. government. In addition, our reputation could suffer serious harm if allegations of impropriety were made against us.
In addition to the risk of government audits and investigations, U.S. government contracts and grants impose requirements on contractors and grantees relating to ethics and business practices, which carry civil and criminal penalties including monetary fines, assessments, loss of the ability to do business with the U.S. government and certain other criminal penalties.
We may also be prohibited from commercially selling certain products that we develop under our Technology Development segment or related products based on the same core technologies if the U.S. government determines that the commercial availability of those products could pose a risk to national security. For example, certain of our wireless technologies have been classified as secret by the U.S. government and as a result we cannot sell them commercially. Any of these determinations would limit our ability to generate product sales and license revenues.
We rely and will continue to rely on contracts and grants awarded under the SBIR program for a significant portion of our revenues. A finding by the SBA that we no longer qualify to receive SBIR awards could adversely affect our business.
We compete as a small business for some of our government contracts. Our revenues derived from the SBIR program account for a significant portion of our consolidated total revenues, and contract research, including SBIR contracts, will remain a significant portion of our consolidated total revenues for the foreseeable future. For the three months ended March 31, 2018 and 2017, revenues generated under the SBIR program represented 36% and 35%, respectively, of our total revenues.
We may not continue to qualify to participate in the SBIR program or to receive new SBIR awards from federal agencies. In order to qualify for SBIR contracts and grants, we must meet certain size and ownership eligibility criteria. These eligibility criteria are applied as of the time of the award of a contract or grant. A company can be declared ineligible for a contract award as a result of a size challenge filed with the SBA by a competitor or a federal agency.
In order to be eligible for SBIR contracts and grants, under current SBA rules we must be more than 50% owned and controlled by individuals who are U.S. citizens or permanent resident aliens, and/or other small business concerns (each of which is more than 50% owned and controlled by individuals who are U.S. citizens or permanent resident aliens) or certain qualified investment companies. In the event our institutional ownership significantly increases, either because of increased buying by institutions or selling by individuals, we could lose eligibility for new SBIR contracts and grants.

32


Also, in order to be eligible for SBIR contracts and grants, the number of our employees, including those of any entities that are considered to be affiliated with us, cannot exceed 500. As of March 31, 2018, we had approximately 202 full-time employees. In determining whether we are affiliated with any other entity, the SBA may analyze whether another entity controls or has the power to control us. Carilion Clinic is our largest institutional stockholder. Since early 2011, a formal size determination by the SBA that focused on whether or not Carilion is or was our affiliate has been outstanding. Although we do not believe that Carilion has or had the power to control our company, we cannot assure you that the SBA will interpret its regulations in our favor on this question. If the SBA were to make a determination that we are or were affiliated with Carilion, we would exceed the size limitations, as Carilion has over 500 employees. In that case, we would lose eligibility for new SBIR contracts and grants and other awards that are set aside for small businesses based on the criterion of number of employees, and the relevant government agency would have the discretion to suspend performance on existing SBIR grants. The loss of our eligibility to receive SBIR awards would have a material adverse impact on our revenues, cash flows and our ability to fund our growth.
Moreover, as our business grows, it is foreseeable that we will eventually exceed the SBIR size limitations, in which case we may be required to seek alternative sources of revenues or capital.
A decline in government research contract awards or government funding for existing or future government research contracts, including SBIR contracts, could adversely affect our revenues, cash flows and ability to fund our growth.
Technology Development segment revenues, which consist primarily of government-funded research, accounted for 38% and 42% of our consolidated total revenues for the three months ended March 31, 2018 and 2017, respectively. As a result, we are vulnerable to adverse changes in our revenues and cash flows if a significant number of our research contracts and subcontracts were to be simultaneously delayed or canceled for budgetary, performance or other reasons. For example, the U.S. government may cancel these contracts at any time without cause and without penalty or may change its requirements, programs or contract budget, any of which could reduce our revenues and cash flows from U.S. government research contracts. Our revenues and cash flows from U.S. government research contracts and subcontracts could also be reduced by declines or other changes in U.S. defense, homeland security and other federal agency budgets. In addition, we compete as a small business for some of these contracts, and in order to maintain our eligibility to compete as a small business, we, together with any affiliates, must continue to meet size and revenue limitations established by the U.S. government.
Our contract research customer base includes government agencies, corporations and academic institutions. Our customers are not obligated to extend their agreements with us and may elect not to do so. Also, our customers’ priorities regarding funding for certain projects may change and funding resources may no longer be available at previous levels.
In addition to contract cancellations and changes in agency budgets, our future financial results may be adversely affected by curtailment of or restrictions on the U.S. government’s use of contract research providers, including curtailment due to government budget reductions and related fiscal matters or any legislation or resolution limiting the number or amount of awards we may receive. These or other factors could cause U.S. defense and other federal agencies to conduct research internally rather than through commercial research organizations or direct awards to other organizations, to reduce their overall contract research requirements or to exercise their rights to terminate contracts. Alternatively, the U.S. government may discontinue the SBIR program or its funding altogether. Also, SBIR regulations permit increased competition for SBIR awards from companies that may not have previously been eligible, such as those backed by venture capital operating companies, hedge funds and private equity firms. Any of these developments could limit our ability to obtain new contract awards and adversely affect our revenues, cash flows and ability to fund our growth.
Our failure to attract, train and retain skilled employees or members of our senior management and to obtain necessary security clearances for such persons or maintain a facility security clearance would adversely affect our business and operating results.
The availability of highly trained and skilled technical and professional personnel is critical to our future growth and profitability. Competition for scientists, engineers, technicians and professional personnel is intense and our competitors aggressively recruit key employees. In the past, we have experienced difficulties in recruiting and hiring these personnel as a result of the tight labor market in certain fields. Any difficulty in hiring or retaining qualified employees, combined with our growth strategy and future needs for additional experienced personnel, particularly in highly specialized areas such as nanomaterial manufacturing and fiber optic sensing technologies, may make it more difficult to meet all of our needs for these employees in a timely manner. Although we intend to continue to devote significant resources to recruit, train and retain qualified employees, we may not be able to attract and retain these employees, especially in technical fields in which the supply of experienced qualified candidates is limited, or at the senior management level. Any failure to do so would have an adverse effect on our business. Any loss of key personnel could have a material adverse effect on our ability to meet key operational

33


objectives, such as timely and effective project milestones and product introductions, which in turn could adversely affect our business, results of operations and financial condition.
We provide certain services to the U.S. government that require us to maintain a facility security clearance and for certain of our employees and our board chairman to hold security clearances. In general, the failure for necessary persons to obtain or retain sufficient security clearances, any loss by us of a facility security clearance or any public reprimand related to security matters could result in a U.S. government customer terminating an existing contract or choosing not to renew a contract or prevent us from bidding on or winning certain new government contracts.
In addition, our future success depends in a large part upon the continued service of key members of our senior management team. We do not maintain any key-person life insurance policies on our officers. The loss of any members of our management team or other key personnel could seriously harm our business.
Our business is subject to the cyclical nature of the markets in which we compete and any future downturn may reduce demand for our products and revenue.
Many factors beyond our control affect our business, including consumer confidence in the economy, interest rates, fuel prices and the general availability of credit. The overall economic climate and changes in Gross National Product growth have a direct impact on some of our customers and the demand for our products. We cannot be sure that our business will not be adversely affected as a result of an industry or general economic downturn.
Our customers may reduce capital expenditures and have difficulty satisfying liquidity needs because of continued turbulence in the U.S. and global economies, resulting in reduced sales of our products and harm to our financial condition and results of operations.
In particular, our historical results of operations have been subject to substantial fluctuations, and we may experience substantial period-to-period fluctuations in future results of operations. Any future downturn in the markets in which we compete could significantly reduce the demand for our products and therefore may result in a significant reduction in revenue or increase the volatility of the price of our common stock. Our revenue and results of operations may be adversely affected in the future due to changes in demand from customers or cyclical changes in the markets utilizing our products.
In addition, the telecommunications industry has, from time to time, experienced, and may again experience, a pronounced downturn. To respond to a downturn, many service providers may slow their capital expenditures, cancel or delay new developments, reduce their workforces and inventories and take a cautious approach to acquiring new equipment and technologies from original equipment manufacturers, which would have a negative impact on our business. Weakness in the global economy or a future downturn in the telecommunications industry may cause our results of operations to fluctuate from quarter-to-quarter and year-to-year, harm our business, and may increase the volatility of the price of our common stock.
Customer acceptance of our products is dependent on our ability to meet changing requirements, and any decrease in acceptance could adversely affect our revenue.
Customer acceptance of our products is significantly dependent on our ability to offer products that meet the changing requirements of our customers, including telecommunication, military, medical and industrial corporations, as well as government agencies. Any decrease in the level of customer acceptance of our products could harm our business.
Our products must meet exacting specifications, and defects and failures may occur, which may cause customers to return or stop buying our products.
Our customers generally establish demanding specifications for quality, performance and reliability that our products must meet. However, our products are highly complex and may contain defects and failures when they are first introduced or as new versions are released. Our products are also subject to rough environments as they are integrated into our customer products for use by the end customers. If defects and failures occur in our products, we could experience lost revenue, increased costs, including warranty expense and costs associated with customer support, delays in or cancellations or rescheduling of orders or shipments, product returns or discounts, diversion of management resources or damage to our reputation and brand equity, and in some cases consequential damages, any of which would harm our operating results. In addition, delays in our ability to fill product orders as a result of quality control issues may negatively impact our relationship with our customers. We cannot assure you that we will have sufficient resources, including any available insurance, to satisfy any asserted claims.
Rapidly changing standards and regulations could make our products obsolete, which would cause our revenue and results of operations to suffer.

34


We design products to conform to our customers’ requirements and our customers’ systems may be subject to regulations established by governments or industry standards bodies worldwide. Because some of our products are designed to conform to current specific industry standards, if competing or new standards emerge that are preferred by our customers, we would have to make significant expenditures to develop new products. If our customers adopt new or competing industry standards with which our products are not compatible, or the industry groups adopt standards or governments issue regulations with which our products are not compatible, our existing products would become less desirable to our customers and our revenue and results of operations would suffer.
The markets for many of our products are characterized by changing technology which could cause obsolescence of our products, and we may incur substantial costs in delivering new products.
The markets for many of our products are characterized by changing technology, new product introductions and product enhancements, and evolving industry standards. The introduction or enhancement of products embodying new technology or the emergence of new industry standards could render existing products obsolete, and result in a write down to the value of our inventory, or result in shortened product life cycles. Accordingly, our ability to compete is in part dependent on our ability to continually offer enhanced and improved products.
The success of our new product offerings will depend upon several factors, including our ability to:

accurately anticipate customer needs;
innovate and develop new technologies and applications;
successfully commercialize new technologies in a timely manner;
price products competitively and manufacture and deliver products in sufficient volumes and on time; and
differentiate our product offerings from those of our competitors.
 
Our inability to find new customers or retain existing customers could harm our business.
Our business is reliant on our ability to find new customers and retain existing customers. In particular, customers normally purchase certain of our products and incorporate them into products that they, in turn, sell in their own markets on an ongoing basis. As a result, the historical sales or these products have been dependent upon the success of our customers’ products and the future performance of our optoelectronics business is dependent upon our success in finding new customers and receiving new orders from existing customers.
In several markets, the quality and reliability of our products are a major concern for our customers, not only upon the initial manufacture of the product, but for the life of the product. Many of our products are used in remote locations for higher value assembly, making servicing of our products unfeasible. Any failure of the quality or reliability of our products could harm our business.
If our customers do not qualify our products or if their customers do not qualify their products, our results of operations may suffer.
Most of our customers do not purchase our optoelectronics products prior to qualification of the products and satisfactory completion of factory audits and vendor evaluation. Our existing products, as well as each new product, must pass through varying levels of qualification with our customers. In addition, because of the rapid technological changes in some markets, a customer may cancel or modify a design project before we begin large-scale manufacturing and receiving revenues from the customer. It is difficult to predict with any certainty whether our customers will delay or terminate product qualification or the frequency with which customers will cancel or modify their projects. Any such delay, cancellation or modification could have a negative effect on our results of operations.
In addition, once a customer qualifies a particular supplier’s product or component, these potential customers design the product into their system, which is known as a design-in win. Suppliers whose products or components are not designed in are unlikely to make sales to that customer until at least the adoption of a future redesigned system. Even then, many customers may be reluctant to incorporate entirely new products into their new systems, as doing so could involve significant additional redesign efforts and increased costs. If we fail to achieve design-in wins in potential customers’ qualification processes, we will likely lose the opportunity for significant sales to those customers for a lengthy period of time.
If the end user customers that purchase systems from our customers fail to qualify or delay qualifications of any products sold by our customers that contain our products, our business could be harmed. The qualification and field testing of our customers’ systems by end user customers is long and unpredictable. This process is not under our control or that of our customers and, as a result, the timing of our sales may be unpredictable. Any unanticipated delay in qualification of one of our

35


customers’ products could result in the delay or cancellation of orders from our customers for products included in their equipment, which could harm our results of operations.
Customer demand for our products is difficult to accurately forecast and, as a result, we may be unable to optimally match production with customer demand, which could adversely affect our business and financial results.
We make planning and spending decisions, including determining the levels of business that we will seek and accept, production schedules, inventory levels, component procurement commitments, personnel needs and other resource requirements, based on our estimates of customer requirements. The short-term nature of commitments by many of our customers and the possibility of unexpected changes in demand for their products reduce our ability to accurately estimate future customer requirements. On occasion, customers may require rapid increases in production, which can strain our resources, cause our manufacturing to be negatively impacted by materials shortages, necessitate higher or more restrictive procurement commitments, increase our manufacturing yield loss and scrapping of excess materials, and reduce our gross margin. We may not have sufficient capacity at any given time to meet the volume demands of our customers, or one or more of our suppliers may not have sufficient capacity at any given time to meet our volume demands. Conversely, a downturn in the markets in which our customers compete can cause, and in the past have caused, our customers to significantly reduce or delay the amount of products ordered or to cancel existing orders, leading to lower utilization of our facilities. Because many of our costs and operating expenses are relatively fixed, reduction in customer demand due to market downturns or other reasons would have a negative effect on our gross margin, operating income and cash flow.
Customer orders and forecasts are subject to cancellation or modification at any time which could result in higher manufacturing costs.
Our sales are made primarily pursuant to standard purchase orders for delivery of products. However, by industry practice, some orders may be canceled or modified at any time. When a customer cancels an order, they may responsible for all finished goods, all costs, direct and indirect, incurred by us, as well as a reasonable allowance for anticipated profits. No assurance can be given that we will receive these amounts after cancellation. Furthermore, uncertainty in customer forecasts of their demands and other factors may lead to delays and disruptions in manufacturing, which could result in delays in product shipments to customers and could adversely affect our business.
Fluctuations and changes in customer demand are common in our business. Such fluctuations, as well as quality control problems experienced in manufacturing operations, may cause delays and disruptions in our manufacturing process and overall operations and reduce output capacity. As a result, product shipments could be delayed beyond the shipment schedules requested by our customers or could be canceled, which would negatively affect our sales, operating income, strategic position at customers, market share and reputation. In addition, disruptions, delays or cancellations could cause inefficient production which in turn could result in higher manufacturing costs, lower yields and potential excess and obsolete inventory or manufacturing equipment. In the past, we have experienced such delays, disruptions and cancellations.
The results of our operations could be adversely affected by economic and political conditions and the effects of these conditions on our customers’ businesses and levels of business activity.
Global economic and political conditions affect our customers’ businesses and the markets they serve. A severe or prolonged economic downturn or a negative or uncertain political climate could adversely affect our customers’ financial conditions and the timing or levels of business activity of our customers and the industries we serve. This may reduce the demand for our products or depress pricing for our products and have a material adverse effect on our results of operations. Changes in global economic conditions could also shift demand to products or services for which we do not have competitive advantages, and this could negatively affect the amount of business we are able to obtain. In addition, if we are unable to successfully anticipate changing economic and political conditions, we may be unable to effectively plan for and respond to those changes, and our business could be negatively affected as a result.
We have a history of losses, and because our strategy for expansion may be costly to implement, we may experience losses and may not maintain profitability or positive cash flow.
We have a history of net losses, including a net loss from continuing operations during the year ended December 31, 2017. We expect to continue to incur significant expenses as we pursue our strategic initiatives, including increased expenses for research and development, sales and marketing and manufacturing. We may also grow our business in part through acquisitions of additional companies and complementary technologies which could cause us to incur greater than anticipated transaction expenses, amortization or write-offs of intangible assets and other acquisition-related expenses. As a result, we may

36


incur net losses in the future, and these losses could be substantial. At a certain level, continued net losses could impair our ability to comply with Nasdaq continued listing standards, as described further below.
Our ability to generate additional revenues and to become profitable will depend on our ability to execute our key growth initiative regarding the development, marketing and sale of sensing products, develop and commercialize innovative technologies, expand our contract research capabilities and sell the products that result from those development initiatives. We may not be able to sustain or increase our profitability on a quarterly or annual basis.

We have obtained capital by borrowing money under term loans and we might require additional capital to support and expand our business; our term loan has various loan covenants with which we must comply.
We intend to continue to make investments to support our business growth, including developing new products, enhancing our existing products, obtaining important regulatory approvals, enhancing our operating infrastructure, completing our development activities and building our commercial scale manufacturing facilities. To the extent that we are unable to become or remain profitable and to finance our activities from continuing operations, we may require additional funds to support these initiatives and to grow our business.
If we are successful in raising additional funds through issuances of equity or convertible debt securities, our existing stockholders could suffer significant dilution, including as the result of the issuance of warrants in connection with the financing, and any new equity securities we issue could have rights, preferences and privileges superior to those of our existing common stock. Furthermore, such financings may jeopardize our ability to apply for SBIR grants or qualify for SBIR contracts or grants, and our dependence on SBIR grants may restrict our ability to raise additional outside capital. If we raise additional funds through debt financings, these financings may involve significant cash payment obligations and covenants that restrict our ability to operate our business and make distributions to our stockholders.
We have term loans with Silicon Valley Bank ("SVB"), which requires us to observe certain financial and operational covenants, including maintenance of a minimum cash balance of $4.0 million, protection and registration of intellectual property rights, and certain customary negative covenants, as well as other customary events of default. If any event of default occurs SVB may declare due immediately all borrowings under our term loans and foreclose on the collateral. Furthermore, an event of default would result in an increase in the interest rate on any amounts outstanding.
If we are unable to obtain adequate financing or financing terms satisfactory to us when we require it, our ability to continue to support our business growth and to respond to business challenges could be significantly limited.
We face and will face substantial competition in several different markets that may adversely affect our results of operations.
We face and will face substantial competition from a variety of companies in several different markets. As we focus on developing marketing and selling fiber optic sensing products, we may also face substantial and entrenched competition in that market.
Many of our competitors have longer operating histories, greater name recognition, larger customer bases and significantly greater financial, sales and marketing, manufacturing, distribution, technical and other resources than we do. These competitors may be able to adapt more quickly to new or emerging technologies and changes in customer requirements. In addition, current and potential competitors have established or may establish financial or strategic relationships among themselves or with existing or potential customers or other third parties. Accordingly, new competitors or alliances among competitors could emerge and rapidly acquire significant market share. We cannot assure you that we will be able to compete successfully against current or new competitors, in which case our revenues may fail to increase or may decline.
Intense competition in our markets could result in aggressive business tactics by our competitors, including aggressively pricing their products or selling older inventory at a discount. If our current or future competitors utilize aggressive business tactics, including those described above, demand for our products could decline, we could experience delays or cancellations of customer orders, or we could be required to reduce our sales prices.
Decreases in average selling prices of our products may increase operating losses and net losses, particularly if we are not able to reduce expenses commensurately.
The market for optical components and subsystems continues to be characterized by declining average selling prices resulting from factors such as increased price competition among optical component and subsystem manufacturers, excess capacity, the introduction of new products and increased unit volumes as manufacturers continue to deploy network and storage systems. In recent years, we have observed a significant decline of average selling prices, primarily in the telecommunications market. We anticipate that average selling prices will continue to decrease in the future in response to product introductions by

37


competitors or by us, or in response to other factors, including price pressures from significant customers. In order to sustain profitable operations, we must, therefore, reduce the cost of our current designs or continue to develop and introduce new products on a timely basis that incorporate features that can be sold at higher average selling prices. Failure to do so could cause our sales to decline and operating losses to increase.
Our cost reduction efforts may not keep pace with competitive pricing pressures. To remain competitive, we must continually reduce the cost of manufacturing our products through design and engineering changes. We may not be successful in redesigning our products or delivering our products to market in a timely manner. We cannot assure you that any redesign will result in sufficient cost reductions enabling us to reduce the price of our products to remain competitive or positively contribute to operating results.
Shifts in product mix may result in declines in gross profit.
Our gross profit margins vary among our product platforms, and are generally highest on our test & measurement instruments. Our overall gross profit may fluctuate from period to period as a result of a variety of factors including shifts in product mix, the introduction of new products, and decreases in average selling prices for older products. If our customers decide to buy more of our products with low gross profit margins or fewer of our products with high gross profit margins, our total gross profits could be harmed.
Risks Relating to our Operations and Business Strategy
If we cannot successfully transition our revenue mix from contract research revenues to product sales and license revenues, we may not be able to fully execute our business model or grow our business.
Our business model and future growth depend on our ability to transition to a revenue mix that contains significantly larger product sales and revenues from the provision of services or from licensing. Product sales and these revenues potentially offer greater scalability than contract research revenues. Our current plan is to increase our sales of commercial products, our licensing revenues and our provision of non-research services to customers so as to represent a larger percentage of our total revenues. If we are unable to develop and grow our product sales and revenues from the provision of services or from licensing to augment our contract research revenues, however, our ability to execute our business model or grow our business could suffer. There can be no assurance that we will be able to achieve increased revenues in this manner.
Failure to develop, introduce and sell new products or failure to develop and implement new technologies, could adversely impact our financial results.
Our success will depend on our ability to develop and introduce new products that customers choose to buy. The new products the market requires tend to be increasingly complex, incorporating more functions and operating at faster speeds than old products. If we fail to introduce new product designs or technologies in a timely manner or if customers do not successfully introduce new systems or products incorporating our products , our business, financial condition and results of operations could be materially harmed.
If we are unable to manage growth effectively, our revenues and net loss could be adversely affected.
We may need to expand our personnel resources to grow our business effectively. We believe that sustained growth at a higher rate will place a strain on our management as well as on our other human resources. To manage this growth, we must continue to attract and retain qualified management, professional, scientific and technical and operating personnel. If we are unable to recruit a sufficient number of qualified personnel, we may be unable to staff and manage projects adequately, which in turn may slow the rate of growth of our contract research revenues or our product development efforts.
We may not be successful in identifying market needs for new technologies or in developing new products.
Part of our business model depends on our ability to correctly identify market needs for new technologies. We intend to identify new market needs, but we may not always have success in doing so in part because our contract research largely centers on identification and development of unproven technologies, often for new or emerging markets. Furthermore, we must identify the most promising technologies from a sizable pool of projects. If our commercialization strategy process fails to identify projects with commercial potential or if management does not ensure that such projects advance to the commercialization stage, we may not successfully commercialize new products and grow our revenues.

38


Our growth strategy requires that we also develop successful commercial products to address market needs. We face several challenges in developing successful new products. Many of our existing products and those currently under development are technologically innovative and require significant and lengthy product development efforts. These efforts include planning, designing, developing and testing at the technological, product and manufacturing-process levels. These activities require us to make significant investments. Although there are many potential applications for our technologies, our resource constraints require us to focus on specific products and to forgo other opportunities. We expect that one or more of the potential products we choose to develop will not be technologically feasible or will not achieve commercial acceptance, and we cannot predict which, if any, of our products we will successfully develop or commercialize. The technologies we research and develop are new and steadily changing and advancing. The products that are derived from these technologies may not be applicable or compatible with the state of technology or demands in existing markets. Our existing products and technologies may become uncompetitive or obsolete if our competitors adapt more quickly than we do to new technologies and changes in customers’ requirements. Furthermore, we may not be able to identify if and when new markets will open for our products given that future applications of any given product may not be readily determinable, and we cannot reasonably estimate the size of any markets that may develop. If we are not able to successfully develop new products, we may be unable to increase our product revenues.
We face risks associated with our international business.

We currently conduct business internationally and we might considerably expand our international activities in the future. Our international business operations are subject to a variety of risks associated with conducting business internationally, including:

having to comply with U.S. export control regulations and policies that restrict our ability to communicate with non-U.S. employees and supply foreign affiliates and customers;
changes in or interpretations of foreign regulations that may adversely affect our ability to sell our products, perform services or repatriate profits to the United States;
the imposition of tariffs;
hyperinflation or economic or political instability in foreign countries;
imposition of limitations on, or increase of withholding and other taxes on remittances and other payments by foreign subsidiaries or joint ventures;
conducting business in places where business practices and customs are unfamiliar and unknown;
the imposition of restrictive trade policies;
the imposition of inconsistent laws or regulations;
the imposition or increase of investment and other restrictions or requirements by foreign governments;
uncertainties relating to foreign laws and legal proceedings;
having to comply with a variety of U.S. laws, including the Foreign Corrupt Practices Act ("FCPA"); and
having to comply with licensing requirements.
We do not know the impact that these regulatory, geopolitical and other factors may have on our international business in the future.
We may dispose of or discontinue existing product lines and technology developments, which may adversely impact our future results.
On an ongoing basis, we evaluate our various product offerings and technology developments in order to determine whether any should be discontinued or, to the extent possible, divested. In addition, if we are unable to generate the amount of cash needed to fund the future operations of our business, we may be forced to sell one or more of our product lines or technology developments.
We cannot guarantee that we have correctly forecasted, or that we will correctly forecast in the future, the right product lines and technology developments to dispose or discontinue or that our decision to dispose of or discontinue various investments, products lines and technology developments is prudent if market conditions change. In addition, there are no assurances that the discontinuance of various product lines will reduce operating expenses or will not cause us to incur material charges associated with such decision. Furthermore, the discontinuance of existing product lines entails various risks, including the risk that we will not be able to find a purchaser for a product line or the purchase price obtained will not be equal to at least the book value of the net assets for the product line. Other risks include managing the expectations of, and maintaining good relations with, our historical customers who previously purchased products from a disposed or discontinued product line, which could prevent us from selling other products to them in the future. We may also incur other significant liabilities and costs associated with disposal or discontinuance of product lines, including employee severance costs and excess facilities costs.

39


We may be liable for damages based on product liability claims relating to defects in our products, which might be brought against us directly, or against our customers in their end-use markets. Such claims could result in a loss of customers in addition to substantial liability in damages.
Our products are complex and undergo quality testing as well as formal qualification, both by our customers and by us. However, defects may occur from time to time. Our customers’ testing procedures may be limited to evaluating our products under likely and foreseeable failure scenarios and over varying amounts of time. For various reasons, such as the occurrence of performance problems that are unforeseeable in testing or that are detected only when products age or are operated under peak stress conditions, our products may fail to perform as expected long after customer acceptance. Failures could result from faulty components or design, problems in manufacturing or other unforeseen reasons. As a result, we could incur significant costs to repair or replace defective products under warranty, particularly when such failures occur in installed systems. In addition, we may in certain circumstances honor warranty claims after the warranty has expired or for problems not covered by warranty in order to maintain customer relationships. Any significant product failure could result in lost future sales of the affected product and other products, as well as customer relations problems, litigation and damage to our reputation.
In addition, many of our products are embedded in, or deployed in conjunction with, our customers’ products, which incorporate a variety of components, modules and subsystems and may be expected to interoperate with modules produced by third parties. As a result, not all defects are immediately detectable, and, when problems occur, it may be difficult to identify the source of the problem. These problems may cause us to incur significant damages or warranty and repair costs, divert the attention of our engineering personnel from internal product development efforts and cause significant customer relations problems or loss of customers, all of which would harm our business.
Furthermore, many of our products may provide critical performance attributes to our customers’ products that will be sold to end users who could potentially bring product liability suits in which we could be named as a defendant. The sale of these products involves the risk of product liability claims. If a person were to bring a product liability suit against one of our customers, this customer may attempt to seek contribution from us. A person may also bring a product liability claim directly against us. A successful product liability claim or series of claims against us in excess of our insurance coverage for payments, for which we are not otherwise indemnified, could have a material adverse effect on our financial condition or results of operations.
We could be negatively affected by a security breach, either through cyber-attack, cyber-intrusion or other significant disruption of our IT networks and related systems.
We face the risk, as does any company, of a security breach, whether through cyber-attack or cyber-intrusion over the internet, malware, computer viruses, attachments to e-mails, persons inside our organization or persons with access to systems inside our organization, or other significant disruption of our IT networks and related systems. The risk of a security breach or disruption, particularly through cyber-attack or cyber-intrusion, including by computer hackers, foreign governments and cyber terrorists, has increased as the number, intensity and sophistication of attempted attacks and intrusions from around the world have increased.
As a technology company, and particularly as a government contractor, we may face a heightened risk of a security breach or disruption from threats to gain unauthorized access to our proprietary, confidential or classified information on our IT networks and related systems. These types of information and IT networks and related systems are critical to the operation of our business and essential to our ability to perform day-to-day operations, and, in some cases, are critical to the operations of certain of our customers. In addition, as certain of our technological capabilities become widely known, it is possible that we may be subjected to cyber-attack or cyber-intrusion as third parties seek to gain improper access to information regarding these capabilities and cyber-attacks or cyber-intrusion could compromise our confidential information or our IT networks and systems generally, as it is not practical as a business matter to isolate all of our confidential information and trade secrets from email and internet access. To date, we have not experienced a significant cyber-intrusion or cyber-attack. There can be no assurance that our security efforts and measures will be effective or that attempted security breaches or disruptions would not be successful or damaging.
A security breach or other significant disruption involving these types of information and IT networks and related systems could disrupt the proper functioning of these networks and systems and therefore our operations, compromise our confidential information and trade secrets, or damage our reputation among our customers and the public generally. Any of these developments could have a negative impact on our results of operations, financial condition and cash flows.    
Risks Relating to our Regulatory Environment

40


Our operations are subject to domestic and foreign laws, regulations and restrictions, and noncompliance with these laws, regulations and restrictions could expose us to fines, penalties, suspension or debarment, which could have a material adverse effect on our profitability and overall financial position.
Our operations, particularly our international sales, subject us to numerous U.S. and foreign laws and regulations, including, without limitation, regulations relating to imports, exports (including the Export Administration Regulations and the International Traffic in Arms Regulations), technology transfer restrictions, anti-boycott provisions, economic sanctions and the FCPA. The number of our various emerging technologies, the development of many of which has been funded by the Department of Defense, presents us with many regulatory challenges. Failure by us or our sales representatives or consultants to comply with these laws and regulations could result in administrative, civil, or criminal liabilities and could result in suspension of our export privileges, which could have a material adverse effect on our business. Changes in regulation or political environment may affect our ability to conduct business in foreign markets including investment, procurement and repatriation of earnings.
Environmental regulations could increase operating costs and additional capital expenditures and delay or interrupt operations.
The photonics industry, as well as the semiconductor industry, are subject to governmental regulations for the protection of the environment, including those relating to air and water quality, solid and hazardous waste handling, and the promotion of occupational safety. Various federal, state and local laws and regulations require that we maintain certain environmental permits. While we believe that we have obtained all necessary environmental permits required to conduct our manufacturing processes, if we are found to be in violation of these laws, we could be subject to governmental fines and liability for damages resulting from such violations.
Changes in the aforementioned laws and regulations or the enactment of new laws, regulations or policies could require increases in operating costs and additional capital expenditures and could possibly entail delays or interruptions of our operations.
If our manufacturing facilities do not meet Federal, state or foreign country manufacturing standards, we may be required to temporarily cease all or part of our manufacturing operations, which would result in product delivery delays and negatively impact revenues.
Our manufacturing facilities are subject to periodic inspection by regulatory authorities and our operations will continue to be regulated by the FDA for compliance with Good Manufacturing Practice requirements contained in the quality systems regulations. We are also required to comply with International Organization for Standardization ("ISO"), quality system standards in order to produce certain of our products for sale in Europe. If we fail to continue to comply with Good Manufacturing Practice requirements or ISO standards, we may be required to cease all or part of our operations until we comply with these regulations. Obtaining and maintaining such compliance is difficult and costly. We cannot be certain that our facilities will be found to comply with Good Manufacturing Practice requirements or ISO standards in future inspections and audits by regulatory authorities. In addition, if we cannot maintain or establish manufacturing facilities or operations that comply with such standards or do not meet the expectations of our customers, we may not be able to realize certain economic opportunities in our current or future supply arrangements.
Medical products are subject to various international regulatory processes and approval requirements. If we do not obtain and maintain the necessary international regulatory approvals for any such potential products, we may not be able to market and sell our medical products in foreign countries.
To be able to market and sell medical products in other countries, we must obtain regulatory approvals and comply with the regulations of those countries. These regulations, including the requirements for approvals and the time required for regulatory review, vary from country to country. Obtaining and maintaining foreign regulatory approvals are expensive, and we cannot be certain that we will have the resources to be able to pursue such approvals or whether we would receive regulatory approvals in any foreign country in which we plan to market our products. For example, the European Union requires that manufacturers of medical products obtain the right to affix the CE mark to their products before selling them in member countries of the European Union, which we have not yet obtained and may never obtain. If we fail to obtain regulatory approval in any foreign country in which we plan to market our products, our ability to generate revenues will be harmed.
We are subject to additional significant foreign and domestic government regulations, including environmental and health and safety regulations, and failure to comply with these regulations could harm our business.

41


Our facilities and current and proposed activities involve the use of a broad range of materials that are considered hazardous under applicable laws and regulations. Accordingly, we are subject to a number of foreign, federal, state and local laws and regulations relating to health and safety, protection of the environment and the storage, use, disposal of, and exposure to, hazardous materials and wastes. We could incur costs, fines and civil and criminal penalties, personal injury and third party property damage claims, or could be required to incur substantial investigation or remediation costs, if we were to violate or become liable under environmental, health and safety laws. Moreover, a failure to comply with environmental laws could result in fines and the revocation of environmental permits, which could prevent us from conducting our business. Liability under environmental laws can be joint and several and without regard to fault. There can be no assurance that violations of environmental and health and safety laws will not occur in the future as a result of the inability to obtain permits, human error, equipment failure or other causes. Environmental laws could become more stringent over time, imposing greater compliance costs and increasing risks and penalties associated with violations, which could harm our business. Accordingly, violations of present and future environmental laws could restrict our ability to expand facilities, pursue certain technologies, and could require us to acquire costly equipment or incur potentially significant costs to comply with environmental regulations.
Compliance with foreign, federal, state and local environmental laws and regulations represents a small part of our present budget. If we fail to comply with any such laws or regulations, however, a government entity may levy a fine on us or require us to take costly measures to ensure compliance. Any such fine or expenditure may adversely affect our development. We cannot predict the extent to which future legislation and regulation could cause us to incur additional operating expenses, capital expenditures or restrictions and delays in the development of our products and properties.
Risks Relating to our Intellectual Property
Our proprietary rights may not adequately protect our technologies.
Our commercial success will depend in part on our obtaining and maintaining patent, trade secret, copyright and trademark protection of our technologies in the United States and other jurisdictions as well as successfully enforcing this intellectual property and defending it against third-party challenges. We will only be able to protect our technologies from unauthorized use by third parties to the extent that valid and enforceable intellectual property protections, such as patents or trade secrets, cover them. In particular, we place considerable emphasis on obtaining patent and trade secret protection for significant new technologies, products and processes. The degree of future protection of our proprietary rights is uncertain because legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep our competitive advantage. The degree of future protection of our proprietary rights is also uncertain for products that are currently in the early stages of development because we cannot predict which of these products will ultimately reach the commercial market or whether the commercial versions of these products will incorporate proprietary technologies.
Our patent position is highly uncertain and involves complex legal and factual questions. Accordingly, we cannot predict the breadth of claims that may be allowed or enforced in our patents or in third-party patents. For example:

we or our licensors might not have been the first to make the inventions covered by each of our pending patent applications and issued patents;
we or our licensors might not have been the first to file patent applications for these inventions;
others may independently develop similar or alternative technologies or duplicate any of our technologies;
it is possible that none of our pending patent applications or the pending patent applications of our licensors will result in issued patents;
patents may issue to third parties that cover how we might practice our technology;
our issued patents and issued patents of our licensors may not provide a basis for commercially viable technologies, may not provide us with any competitive advantages, or may be challenged and invalidated by third parties; and
we may not develop additional proprietary technologies that are patentable.
Patents may not be issued for any pending or future pending patent applications owned by or licensed to us, and claims allowed under any issued patent or future issued patent owned or licensed by us may not be valid or sufficiently broad to protect our technologies. Moreover, protection of certain of our intellectual property may be unavailable or limited in the United States or in foreign countries, and we have not sought to obtain foreign patent protection for certain of our products or technologies due to cost, concerns about enforceability or other reasons. Any issued patents owned by or licensed to us now or in the future may be challenged, invalidated, or circumvented, and the rights under such patents may not provide us with competitive advantages. In addition, competitors may design around our technology or develop competing technologies. Intellectual property rights may also be unavailable or limited in some foreign countries, and in the case of certain products no foreign patents were filed or can be filed. This could make it easier for competitors to capture or increase their market share with respect to related technologies. We could incur substantial costs to bring suits in which we may assert our patent rights

42


against others or defend ourselves in suits brought against us. An unfavorable outcome of any litigation could have a material adverse effect on our business and results of operations.
We also rely on trade secrets to protect our technology, especially where we believe patent protection is not appropriate or obtainable. However, trade secrets are difficult to protect. We regularly attempt to obtain confidentiality agreements and contractual provisions with our collaborators, employees and consultants to protect our trade secrets and proprietary know-how. These agreements may be breached or may not have adequate remedies for such breach. While we use reasonable efforts to protect our trade secrets, our employees, consultants, contractors or scientific and other advisors, or those of our strategic partners, may unintentionally or willfully disclose our information to competitors. If we were to enforce a claim that a third party had illegally obtained and was using our trade secrets, our enforcement efforts would be expensive and time consuming, and the outcome would be unpredictable. In addition, courts outside the United States are sometimes unwilling to protect trade secrets. Moreover, if our competitors independently develop equivalent knowledge, methods and know-how, it will be more difficult for us to enforce our rights and our business could be harmed.
If we are not able to defend the patent or trade secret protection position of our technologies, then we will not be able to exclude competitors from developing or marketing competing technologies and we may not generate enough revenues from product sales to justify the cost of developing our technologies and to achieve or maintain profitability.
We also rely on trademarks to establish a market identity for our company and our products. To maintain the value of our trademarks, we might have to file lawsuits against third parties to prevent them from using trademarks confusingly similar to or dilutive of our registered or unregistered trademarks. Also, we might not obtain registrations for our pending trademark applications, and we might have to defend our registered trademark and pending trademark applications from challenge by third parties. Enforcing or defending our registered and unregistered trademarks might result in significant litigation costs and damages, including the inability to continue using certain trademarks.
Third parties may claim that we infringe their intellectual property, and we could suffer significant litigation or licensing expense as a result.
Various U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in our technology areas. Such third parties may claim that we infringe their patents. Because patent applications can take several years to result in a patent issuance, there may be currently pending applications, unknown to us, which may later result in issued patents that our technologies may infringe. For example, we are aware of competitors with patents in technology areas applicable to our optical test equipment products. Such competitors may allege that we infringe these patents. There could also be existing patents of which we are not aware that our technologies may inadvertently infringe. We have from time to time been, and may in the future be, contacted by third parties, including patent assertion entities or intellectual property advisors, about licensing opportunities that also contain claims that we are infringing on third party patent rights. If third parties assert these claims against us, we could incur extremely substantial costs and diversion of management resources in defending these claims, and the defense of these claims could have a material adverse effect on our business, financial condition and results of operations. Even if we believe we have not infringed on a third party’s patent rights, we may have to settle a claim on unfavorable terms because we cannot afford to litigate the claim. In addition, if third parties assert claims against us and we are unsuccessful in defending against these claims, these third parties may be awarded substantial damages as well as injunctive or other equitable relief against us, which could effectively block our ability to make, use, sell, distribute or market our products and services in the United States or abroad.
Commercial application of nanotechnologies in particular, or technologies involving nanomaterials, is new and the scope and breadth of patent protection is uncertain. Consequently, the patent positions of companies involved in nanotechnologies have not been tested, and there are complex legal and factual questions for which important legal principles will be developed or may remain unresolved. In addition, it is not clear whether such patents will be subject to interpretations or legal doctrines that differ from conventional patent law principles. Changes in either the patent laws or in interpretations of patent laws in the United States and other countries may diminish the value of our nanotechnology-related intellectual property. Accordingly, we cannot predict the breadth of claims that may be allowed or enforced in our nanotechnology-related patents or in third party patents. In the event that a claim relating to intellectual property is asserted against us, or third parties not affiliated with us hold pending or issued patents that relate to our products or technology, we may seek licenses to such intellectual property or challenge those patents. However, we may be unable to obtain these licenses on commercially reasonable terms, if at all, and our challenge of the patents may be unsuccessful. Our failure to obtain the necessary licenses or other rights could prevent the sale, manufacture or distribution of our products and, therefore, could have a material adverse effect on our business, financial condition and results of operations.
A substantial portion of our technology is subject to retained rights of our licensors, and we may not be able to prevent the loss of those rights or the grant of similar rights to third parties.

43


A substantial portion of our technology is licensed from academic institutions, corporations and government agencies. Under these licensing arrangements, a licensor may obtain rights over the technology, including the right to require us to grant a license to one or more third parties selected by the licensor or that we provide licensed technology or material to third parties for non-commercial research. The grant of a license for any of our core technologies to a third party could have a material and adverse effect on our business. In addition, some of our licensors retain certain rights under the licenses, including the right to grant additional licenses to a substantial portion of our core technology to third parties for non-commercial academic and research use. It is difficult to monitor and enforce such non-commercial academic and research uses, and we cannot predict whether the third-party licensees would comply with the use restrictions of such licenses. We have incurred and could incur substantial expenses to enforce our rights against them. We also may not fully control the ability to assert or defend those patents or other intellectual property which we have licensed from other entities, or which we have licensed to other entities.
In addition, some of our licenses with academic institutions give us the right to use certain technology previously developed by researchers at these institutions. In certain cases we also have the right to practice improvements on the licensed technology to the extent they are encompassed by the licensed patents and are within our field of use. Our licensors may currently own and may in the future obtain additional patents and patent applications that are necessary for the development, manufacture and commercial sale of our anticipated products. We may be unable to agree with one or more academic institutions from which we have obtained licenses whether certain intellectual property developed by researchers at these academic institutions is covered by our existing licenses. In the event that the new intellectual property is not covered by our existing licenses, we would be required to negotiate a new license agreement. We may not be able to reach agreement with current or future licensors on commercially reasonable terms, if at all, or the terms may not permit us to sell our products at a profit after payment of royalties, which could harm our business.
Some of our patents may cover inventions that were conceived or first reduced to practice under, or in connection with, U.S. government contracts or other federal funding agreements. With respect to inventions conceived or first reduced to practice under a federal funding agreement, the U.S. government may retain a non-exclusive, non-transferable, irrevocable, paid-up license to practice or have practiced for or on behalf of the United States the invention throughout the world. We may not succeed in our efforts to retain title in patents, maintain ownership of intellectual property or in limiting the U.S. government’s rights in our proprietary technologies and intellectual property when an issue exists as to whether such intellectual property was developed in the performance of a federal funding agreement or developed at private expense.
If we fail to obtain the right to use the intellectual property rights of others which are necessary to operate our business, and to protect their intellectual property, our business and results of operations will be adversely affected.
In the past, we have licensed certain technologies for use in our products. In the future, we may choose, or be required, to license technology or intellectual property from third parties in connection with the development of our products. We cannot assure you that third-party licenses will be available on commercially reasonable terms, if at all. Our competitors may be able to obtain licenses, or cross-license their technology, on better terms than we can, which could put us at a competitive disadvantage. Also, we often enter into confidentiality agreements with such third parties in which we agree to protect and maintain their proprietary and confidential information, including at times requiring our employees to enter into agreements protecting such information. There can be no assurance that the confidentiality agreements will not be breached by any of our employees or that such third parties will not make claims that their proprietary information has been disclosed.
RISKS RELATING TO OUR COMMON STOCK
The United States Tax Cuts and Jobs Act of 2017 could adversely affect our business and financial condition.
The U.S. Tax Cuts and Jobs Act (the "TCJA") significantly reforms the US Internal Revenue Code. The TCJA, among other things, contains significant changes to U.S. federal corporate income taxation, including reduction of the U.S. federal corporate income tax rate from a top marginal rate of 35% to a flat rate of 21%, limitation of the tax deduction for interest expense to 30% of adjusted earnings (except for certain small businesses), limitation of the deduction for net operating losses to 80% of current year taxable income and elimination of net operating loss carrybacks, immediate deductions for certain new investments instead of deductions for depreciation expense over time, and modifying or repealing many business deductions and credits. Federal net operating losses arising in taxable year ending after December 31, 2017, will be carried forward indefinitely pursuant to the TCJA. We continue to examine the impact this tax reform legislation may have on our business. Notwithstanding the reduction in the corporate income tax rate, the overall impact of the TCJA is uncertain and our business and financial condition could be adversely affected. The impact of this tax reform on holders of our common stock is also uncertain and could be adverse. We urge our stockholders to consult with their legal and tax advisors with respect to such legislation and the potential tax consequences of investing in our common stock.

44


If there are substantial sales of our common stock, or the perception that such sales may occur, our stock price could decline.
If any of our stockholders were to sell substantial amounts of our common stock, the market price of our common stock may decline, which might make it more difficult for us to sell equity or equity-related securities in the future at a time and price that we deem appropriate. Substantial sales of our common stock, or the perception that such sales may occur, may have a material adverse effect on the prevailing market price of our common stock.
Carilion Clinic holds approximately 3.5 million shares of our common stock (including approximately 1.3 million shares issuable to Carilion upon conversion of shares of Series A Convertible Preferred Stock that Carilion holds). All of these shares have been registered for sale on a Form S-3 registration statement and, accordingly, may generally be freely sold by Carilion at any time. Any sales of these shares, or the perception that future sales of shares may occur by Carilion or any of our other significant stockholders, may have a material adverse effect on the market price of our stock. Any such continuing material adverse effect on the market price of our stock could impair our ability to comply with Nasdaq’s continuing listing standards in respect of our minimum stock price, as further described below.
We may become involved in securities class action litigation that could divert management’s attention and harm our business and our insurance coverage may not be sufficient to cover all costs and damages.
The stock market has from time to time experienced significant price and volume fluctuations that have affected the market prices for the common stock of technology companies. These broad market fluctuations may cause the market price of our common stock to decline. In the past, following periods of volatility in the market price of a particular company’s securities, securities class action litigation has often been brought against that company. Securities class litigation also often follows certain significant business transactions, such as the sale of a business division or a change in control transaction. We may become involved in this type of litigation in the future. Litigation often is expensive and diverts management’s attention and resources, which could adversely affect our business.
We may not be able to comply with all applicable listing requirements or standards of The Nasdaq Capital Market and Nasdaq could delist our common stock.
Our common stock is listed on The Nasdaq Capital Market. In order to maintain that listing, we must satisfy minimum financial and other continued listing requirements and standards. One such requirement is that we maintain a minimum bid price of at least $1.00 per share for our common stock. Although we currently comply with the minimum bid requirement, in the recent past, our minimum bid price has fallen below $1.00 per share, and it could again do so in the future. If our bid price falls below $1.00 per share for 30 consecutive business days, we will receive a deficiency notice from Nasdaq advising us that we have 180 days to regain compliance by maintaining a minimum bid price of at least $1.00 for a minimum of ten consecutive business days. Under certain circumstances, Nasdaq could require that the minimum bid price exceed $1.00 for more than ten consecutive days before determining that a company complies.
In the event that our common stock is not eligible for continued listing on Nasdaq or another national securities exchange, trading of our common stock could be conducted in the over-the-counter market or on an electronic bulletin board established for unlisted securities such as the Pink Sheets or the OTC Bulletin Board. In such event, it could become more difficult to dispose of, or obtain accurate price quotations for, our common stock, and there would likely also be a reduction in our coverage by security analysts and the news media, which could cause the price of our common stock to decline further. Also, it may be difficult for us to raise additional capital if we are not listed on a major exchange.
Our common stock price has been volatile and we expect that the price of our common stock will fluctuate substantially in the future, which could cause you to lose all or a substantial part of your investment.

The public trading price for our common stock is volatile and may fluctuate significantly. Since January 1, 2009, our common stock has traded between a high of $5.00 per share and a low of $0.26 per share. Among the factors, many of which we cannot control, that could cause material fluctuations in the market price for our common stock are:

sales of our common stock by our significant stockholders, or the perception that such sales may occur;
changes in earnings estimates, investors’ perceptions, recommendations by securities analysts or our failure to achieve analysts’ earnings estimates;
changes in our status as an entity eligible to receive SBIR contracts and grants;
quarterly variations in our or our competitors’ results of operations;
general market conditions and other factors unrelated to our operating performance or the operating performance of our competitors;

45


announcements by us, or by our competitors, of acquisitions, new products, significant contracts, commercial relationships or capital commitments;
pending or threatened litigation;
any major change in our board of directors or management or any competing proxy solicitations for director nominees;
changes in governmental regulations or in the status of our regulatory approvals;
announcements related to patents issued to us or our competitors;
a lack of, limited or negative industry or securities analyst coverage;
discussions of our company or our stock price by the financial and scientific press and online investor communities; and
general developments in our industry.

In addition, the stock prices of many technology companies have experienced wide fluctuations that have often been unrelated to the operating performance of those companies. These factors may materially and adversely affect the market price of our common stock.
If our internal control over financial reporting is found not to be effective or if we make disclosure of existing or potential material weaknesses in those controls, investors could lose confidence in our financial reports, and our stock price may be adversely affected.
Section 404 of the Sarbanes-Oxley Act of 2002 requires us to include an internal control report with our Annual Report on Form 10-K. That report must include management’s assessment of the effectiveness of our internal control over financial reporting as of the end of the fiscal year.
We evaluate our existing internal control over financial reporting based on the framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. During the course of our ongoing evaluation of the internal controls, we may identify areas requiring improvement, and may have to design enhanced processes and controls to address issues identified through this review. Remedying any deficiencies, significant deficiencies or material weaknesses that we identify may require us to incur significant costs and expend significant time and management resources. We cannot assure you that any of the measures we implement to remedy any such deficiencies will effectively mitigate or remedy such deficiencies. Investors could lose confidence in our financial reports, and our stock price may be adversely affected, if our internal controls over financial reporting are found not to be effective by management or if we make disclosure of existing or potential significant deficiencies or material weaknesses in those controls.
If our estimates relating to our critical accounting policies are based on assumptions or judgments that change or prove to be incorrect, our operating results could fall below expectations of financial analysts and investors, resulting in a decline in our stock price.
The preparation of financial statements in conformity with U.S. GAAP requires our management to make estimates, assumptions and judgments that affect the amounts reported in the consolidated financial statements and accompanying notes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets, liabilities, equity, revenue and expenses that are not readily apparent from other sources. Our operating results may be adversely affected if our assumptions change or if actual circumstances differ from those in our assumptions, which could cause our operating results to fall below the expectations of financial analysts and investors, resulting in a decline in our stock price. Significant assumptions and estimates used in preparing our consolidated financial statements include those related to revenue recognition, stock-based compensation and income taxes. Moreover, the new revenue recognition guidance, ASC Topic 606, Revenue from Contracts with Customers, requires more judgment than did the prior guidance.
Our financial results may be adversely affected by changes in accounting principles applicable to us.
U.S. GAAP are subject to interpretation by the FASB, the SEC, and other bodies formed to promulgate and interpret appropriate accounting principles. For example, in May 2014, the FASB issued ASC Topic 606, Revenue from Contracts with Customers, which supersedes nearly all existing revenue recognition guidance under U.S. GAAP. We adopted this guidance as of January 1, 2018. The most significant impact relates to changing the revenue recognition for custom optoelectronics to an over time method. Before the adoption of this standard, we deferred the recognition of revenue until products were shipped to the customer. Any difficulties in implementing these pronouncements or adequately accounting after adoption could cause us to fail to meet our financial reporting obligations, which could result in regulatory discipline and harm investors’ confidence in us.

46


Anti-takeover provisions in our amended and restated certificate of incorporation and bylaws and Delaware law could discourage or prevent a change in control, even if an acquisition would be beneficial to our stockholders, which could affect our stock price adversely and prevent attempts by our stockholders to replace or remove our current management.

Our amended and restated certificate of incorporation and bylaws and Delaware law contain provisions that might delay or prevent a change in control, discourage bids at a premium over the market price of our common stock and adversely affect the market price of our common stock and the voting and other rights of the holders of our common stock. These provisions include:

a classified board of directors serving staggered terms;
advance notice requirements to stockholders for matters to be brought at stockholder meetings;
a supermajority stockholder vote requirement for amending certain provisions of our amended and restated certificate of incorporation and bylaws; and
the right to issue preferred stock without stockholder approval, which could be used to dilute the stock ownership of a potential hostile acquirer.

We are also subject to provisions of the Delaware General Corporation law that, in general, prohibit any business combination with a beneficial owner of 15% or more of our common stock for three years unless the holder’s acquisition of our stock was approved in advance by our board of directors or certain other conditions are satisfied.
The existence of these provisions could adversely affect the voting power of holders of common stock and limit the price that investors might be willing to pay in the future for shares of our common stock.




47



ITEM 2.
UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS
(a) Unregistered Sales of Equity Securities during the Three Months Ended March 31, 2018
Common Stock Dividend Payable to Carilion
We issued 1,321,514 shares of Series A Preferred Stock, par value $0.001 per share, to Carilion Clinic in January 2010, which shares were issued in reliance on the exemptions from registration under the Securities Act provided by Sections 3(a)(9) and 4 (a)(2) thereof. The Series A Preferred Stock accrues dividends at the rate of $0.2815 per share per annum, payable quarterly in arrears. Accrued dividends are payable in shares of our common stock, with the number of shares being equal to the quotient of (i) the cumulative aggregate balance of accrued but unpaid dividends on each share of Series A Preferred Stock divided by (ii) the conversion price of the Series A Preferred Stock, which is currently $4.69159 per share. For the period from January 12, 2010, the original issue date of the Series A Preferred Stock, through March 31, 2018, the Series A Preferred Stock issued to Carilion has accrued $1,224,755 in dividends. The accrued dividend as of March 31, 2018 will be paid by the issuance of 651,516 shares of our common stock, which we will issue at Carilion’s written request. As the Series A Preferred Stock was issued in reliance on the exemption provided by Section 3(a)(9), the shares of common stock payable as dividends will also be exempt from registration in reliance on Section 3(a)(9) of the Securities Act.
(b) Use of Proceeds from Sale of Registered Equity Securities
Not applicable.
(c) Purchases of Equity Securities by the Registrant
On September 20, 2017, we announced that our board of directors re-instituted our stock repurchase program, authorizing the repurchase of up to $2.0 million of our common stock. An aggregate purchase price of $1.1 million had been expended under this program as of March 31, 2018. Unless extended, the stock repurchase authorization expires on September 19, 2018 and may be terminated, increased or decreased by our board of directors at any time.
The following table summarizes repurchases of our common stock during the three months ended March 31, 2018.
 
 
 
Total Number of
Approximate Dollar
 
 
 
Shares Purchased as
Value of Shares that
 
Total Number of Shares
Average Price Paid per
Part of a Publicly
May Yet be Purchased
Period
Purchased
Share
Announced Program
Under the Program
1/1/2018 - 1/31/2018
56,400

$
2.38

56,400

$
1,105,080

2/1/2018 - 2/28/2018
73,250

$
2.27

73,250

$
938,836

3/1/2018 - 3/31/2018
2,800

$
2.51

2,800

$
931,809

Total
132,450

$
2.32

132,450

$
931,809





ITEM 3.
DEFAULTS UPON SENIOR SECURITIES
None.

ITEM 4.
MINE SAFETY DISCLOSURES
Not applicable.

ITEM 5.
OTHER INFORMATION
None.

48



ITEM 6.
EXHIBITS

Exhibit
Number
 
Description
31.1
 
 
 
31.2
 
 
 
32.1*
 
 
 
32.2*
 
 
 
101
 
The following materials from the Registrant’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2018, formatted in XBRL (eXtensible Business Reporting Language): (i) Consolidated Balance Sheets at March 31, 2018 and December 31, 2017, (ii) Consolidated Statements of Operations for the three months ended March 31, 2018 and 2017, (iii) Consolidated Statements of Cash Flows for the three months ended March 31, 2018 and 2017 and (iv) Notes to Unaudited Consolidated Financial Statements.

*
These certifications are being furnished solely to accompany this quarterly report pursuant to 18 U.S.C. Section 1350, and are not being filed for purposes of Section 18 of the Securities Exchange Act of 1934 and are not to be incorporated by reference into any filing of the registrant, whether made before or after the date hereof, regardless of any general incorporation language in such filing.


49


SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
 
 
 
Luna Innovations Incorporated
Date:
May 10, 2018
 
By:
/s/    Dale Messick        
 
 
 
 
Dale Messick
 
 
 
 
Chief Financial Officer
(principal financial and accounting officer and duly authorized officer)

50