Attached files

file filename
EX-32.2 - EXHIBIT 32.2 - DRIL-QUIP INCexhibit3222017q1.htm
EX-32.1 - EXHIBIT 32.1 - DRIL-QUIP INCexhibit3212017q1.htm
EX-31.2 - EXHIBIT 31.2 - DRIL-QUIP INCexhibit3122017q1.htm
EX-31.1 - EXHIBIT 31.1 - DRIL-QUIP INCexhibit3112017q1.htm

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
_______________________________________________________
FORM 10-Q
_______________________________________________________
(MARK ONE)
ý
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the Quarterly Period Ended March 31, 2017
or
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission file number 001-13439
_______________________________________________________
DRIL-QUIP, INC.
(Exact name of registrant as specified in its charter)
_______________________________________________________
DELAWARE
 
74-2162088
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification No.)
6401 N. ELDRIDGE PARKWAY
HOUSTON, TEXAS
77041
(Address of principal executive offices) (Zip Code)
(713) 939-7711
(Registrant’s telephone number, including area code)
_______________________________________________________
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ý    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of regulations S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ý    No  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
ý
Accelerated filer
¨
Non-accelerated filer
¨ (Do not check if a smaller reporting company)
Smaller reporting company
¨
 
 
Emerging growth company
¨
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨
Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2).    Yes  ¨    No  ý
As of April 26, 2017, the number of shares outstanding of the registrant’s common stock, par value $0.01 per share, was 37,834,392.



TABLE OF CONTENTS




PART I—FINANCIAL INFORMATION
Item 1.        Financial Statements
DRIL-QUIP, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
(UNAUDITED)
 
March 31,
2017
 
December 31,
2016
 
(In thousands)
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
414,190

 
$
423,497

Trade receivables, net
208,496

 
213,513

Inventories, net
346,737

 
355,413

Deferred income taxes

 
24,497

Prepaids and other current assets
37,806

 
39,791

Total current assets
1,007,229

 
1,056,711

Property, plant and equipment, net
319,974

 
323,149

Deferred income taxes
23,139

 
1,699

Goodwill
46,514

 
34,371

Intangible assets
39,843

 
29,594

Other assets
16,788

 
15,880

Total assets
$
1,453,487

 
$
1,461,404

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
25,696

 
$
36,108

Accrued income taxes
21,961

 
24,543

Customer prepayments
6,629

 
11,884

Accrued compensation
12,468

 
10,829

Other accrued liabilities
16,439

 
18,116

Total current liabilities
83,193

 
101,480

Deferred income taxes
2,298

 
3,500

Total liabilities
85,491

 
104,980

Commitments and contingencies (Note 10)

 

Stockholders’ equity:
 
 
 
Preferred stock, 10,000,000 shares authorized at $0.01 par value (none issued)

 

Common stock:
 
 
 
100,000,000 shares authorized at $0.01 par value, 37,831,982 and 37,797,317 shares issued and outstanding at March 31, 2017 and December 31, 2016
375

 
375

Additional paid-in capital
9,087

 
5,468

Retained earnings
1,501,082

 
1,500,988

Accumulated other comprehensive losses
(142,548
)
 
(150,407
)
Total stockholders’ equity
1,367,996

 
1,356,424

Total liabilities and stockholders’ equity
$
1,453,487

 
$
1,461,404

The accompanying notes are an integral part of these condensed consolidated financial statements.

3


DRIL-QUIP, INC.
CONDENSED CONSOLIDATED STATEMENTS OF INCOME
(UNAUDITED)
 
Three months ended
March 31,
 
2017
 
2016
 
(In thousands, except per share data)
Revenues:
 
 
 
Products
$
91,592

 
$
135,194

Services
27,636

 
31,367

Total revenues
119,228

 
166,561

Cost and expenses:
 
 
 
Cost of sales:
 
 
 
Products
66,462

 
76,922

Services
15,978

 
16,174

Total cost of sales
82,440

 
93,096

Selling, general and administrative
25,808

 
13,221

Engineering and product development
11,850

 
10,901

Total costs and expenses
120,098

 
117,218

Operating income (loss)
(870
)
 
49,343

Interest income
937

 
482

Interest expense
(15
)
 
(4
)
Income before income taxes
52

 
49,821

Income tax provision (benefit)
(42
)
 
13,052

Net income
$
94

 
$
36,769

Earnings per common share:
 
 
 
Basic
$

 
$
0.97

Diluted
$

 
$
0.97

Weighted average common shares outstanding:
 
 
 
Basic
37,525

 
37,752

Diluted
37,693

 
37,847

The accompanying notes are an integral part of these condensed consolidated financial statements.

4


DRIL-QUIP, INC.
CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(UNAUDITED)
 
Three months ended
March 31,
 
2017
 
2016
 
(In thousands)
Net income
$
94

 
$
36,769

Other comprehensive loss, net of tax:
 
 
 
Foreign currency translation adjustments
7,859

 
(1,266
)
Total comprehensive income
$
7,953

 
$
35,503

The accompanying notes are an integral part of these condensed consolidated financial statements.

5


DRIL-QUIP, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(UNAUDITED)
 
Three months ended
March 31,
 
2017
 
2016
 
(In thousands)
Operating activities
 
 
 
Net income
$
94

 
$
36,769

Adjustments to reconcile net income to net cash provided by (used in) operating activities:
 
 
 
Depreciation and amortization
9,832

 
7,775

Stock-based compensation expense
3,216

 
3,192

Loss (gain) on sale of equipment

 
(13
)
Deferred income taxes
(1,121
)
 
(962
)
Changes in operating assets and liabilities:
 
 
 
Trade receivables, net
7,044

 
(8,942
)
Inventories, net
11,591

 
1,899

Prepaids and other assets
3,051

 
8,050

Excess tax benefits of stock options and awards

 
(11
)
Accounts payable and accrued expenses
(22,231
)
 
4,766

Net cash provided by operating activities
11,476

 
52,523

Investing activities
 
 
 
Purchase of property, plant and equipment
(4,847
)
 
(7,732
)
Proceeds from sale of equipment
439

 
76

Acquisition of business, net of cash acquired
(19,869
)
 

Net cash used in investing activities
(24,277
)
 
(7,656
)
Financing activities
 
 
 
Repurchase of common stock

 

Proceeds from exercise of stock options
403

 
155

Excess tax benefits of stock options and awards

 
11

Net cash used in financing activities
403

 
166

Effect of exchange rate changes on cash activities
3,091

 
(3,003
)
Increase (decrease) in cash and cash equivalents
(9,307
)
 
42,030

Cash and cash equivalents at beginning of period
423,497

 
381,336

Cash and cash equivalents at end of period
$
414,190

 
$
423,366

The accompanying notes are an integral part of these condensed consolidated financial statements.

6


DRIL-QUIP, INC.
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(UNAUDITED)
1. Organization and Principles of Consolidation
Dril-Quip, Inc., a Delaware corporation (the “Company” or “Dril-Quip”), designs, manufactures, sells and services highly engineered drilling and production equipment that is well suited primarily for use in deepwater, harsh environment and severe service applications. The Company’s principal products consist of subsea and surface wellheads, subsea and surface production trees, subsea control systems and manifolds, mudline hanger systems, specialty connectors and associated pipe, drilling and production riser systems, liner hangers, wellhead connectors, diverters and safety valves. Dril-Quip’s products are used by major integrated, large independent and foreign national oil and gas companies and drilling contractors throughout the world. Dril-Quip also provides technical advisory assistance on an as-requested basis during installation of its products, as well as rework and reconditioning services for customer-owned Dril-Quip products. In addition, Dril-Quip’s customers may rent or purchase running tools from the Company for use in the installation and retrieval of the Company’s products.
The Company’s operations are organized into three geographic segments— Western Hemisphere (including North and South America; headquartered in Houston, Texas), Eastern Hemisphere (including Europe and Africa; headquartered in Aberdeen, Scotland) and Asia-Pacific (including the Pacific Rim, Southeast Asia, Australia, India and the Middle East; headquartered in Singapore). Each of these segments sells similar products and services, and the Company has major manufacturing facilities in all three of its headquarter locations as well as at TIW in Houston, Texas and in Macae, Brazil. The Company maintains additional facilities for fabrication and/or reconditioning and rework in Australia, Canada, China, Denmark, Ecuador, Egypt, Ghana, Hungary, Indonesia, Mexico, Nigeria, Norway, Qatar and Venezuela. The Company’s manufacturing operations are vertically integrated, allowing it to perform substantially all of its forging, heat treating, machining, fabrication, inspection, assembly and testing at its own facilities. The Company’s major subsidiaries are Dril-Quip (Europe) Limited, located in Aberdeen with branches in Denmark, Norway and Holland; Dril-Quip Asia Pacific PTE Ltd., located in Singapore; TIW Corporation (TIW), located in Houston, Texas; Dril-Quip do Brasil LTDA, located in Macae, Brazil; and DQ Holdings Pty. Ltd., located in Perth, Australia. Other subsidiaries include TIW Canada Ltd., located in Alberta, Canada; Dril-Quip Oilfield Services (Tianjin) Co. Ltd., located in Tianjin, China with branches in Shenzhen and Beijing, China; Dril-Quip Egypt for Petroleum Services S.A.E., located in Alexandria, Egypt; Dril-Quip (Ghana) Ltd., located in Takoradi, Ghana; TIW Hungary LLC, located in Szolnok, Hungary; PT DQ Oilfield Services Indonesia, located in Jakarta, Indonesia; TIW de Mexico S.A. de C.V., located in Villahermosa, Mexico; Dril-Quip (Nigeria) Ltd., located in Port Harcourt, Nigeria; Dril-Quip Qatar LLC, located in Doha, Qatar; TIW (UK) Limited, located in Aberdeen, Scotland; TIW de Venezuela S.A., located in Anaco, Venezuela and with a registered branch located in Shushufindi, Ecuador; and TIW International, Inc., with a registered branch located in Singapore.
The condensed consolidated financial statements included herein are unaudited. The balance sheet at December 31, 2016 has been derived from the audited consolidated financial statements at that date. In the opinion of management, the unaudited condensed consolidated interim financial statements include all normal recurring adjustments necessary for a fair statement of the financial position as of March 31, 2017 and the results of operations, comprehensive income and cash flows for the three-month periods ended March 31, 2017 and 2016. Certain information and footnote disclosures normally included in annual audited consolidated financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been condensed or omitted pursuant to the rules and regulations of the Securities and Exchange Commission. Management believes the unaudited interim related disclosures in these condensed consolidated financial statements are adequate. The results of operations, comprehensive income and cash flows for the three-month period ended March 31, 2017 are not necessarily indicative of the results to be expected for the full year. The condensed consolidated financial statements included herein should be read in conjunction with the audited consolidated financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2016.
2. Significant Accounting Policies
Principles of Consolidation
The condensed consolidated financial statements include the accounts of the Company and its subsidiaries. All material intercompany accounts and transactions have been eliminated.
Use of Estimates
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect reported amounts of assets and liabilities and

7


disclosure of contingent assets and liabilities as of the date of the financial statements and reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Some of the Company’s more significant estimates are those affected by critical accounting policies for revenue recognition, inventories and contingent liabilities.
Revenue Recognition
Product revenues
The Company recognizes product revenues from two methods:
product revenues recognized under the percentage-of-completion method; and
product revenues from the sale of products that do not qualify for the percentage-of-completion method.
Revenues recognized under the percentage-of-completion method
The Company uses the percentage-of-completion method on long-term project contracts that have the following characteristics:
the contracts call for products which are designed to customer specifications;
the structural designs are unique and require significant engineering and manufacturing efforts generally requiring more than one year in duration;
the contracts contain specific terms as to milestones, progress billings and delivery dates; and
product requirements cannot be filled directly from the Company’s standard inventory.
For each project, the Company prepares a detailed analysis of estimated costs, profit margin, completion date and risk factors which include availability of material, production efficiencies and other factors that may impact the project. On a quarterly basis, management reviews the progress of each project, which may result in revisions of previous estimates, including revenue recognition. The Company calculates the percentage complete and applies the percentage to determine the revenues earned and the appropriate portion of total estimated costs to be recognized. Losses, if any, are recorded in full in the period they become known. Historically, the Company’s estimates of total costs and costs to complete have approximated actual costs incurred to complete the project.
Under the percentage-of-completion method, billings may not correlate directly to the revenue recognized. Based upon the terms of the specific contract, billings may be in excess of the revenue recognized, in which case the amounts are included in customer prepayments as a liability on the Condensed Consolidated Balance Sheets. Likewise, revenue recognized may exceed customer billings in which case the amounts are reported in trade receivables. Unbilled revenues are expected to be billed and collected within one year. At March 31, 2017 and December 31, 2016, receivables included $55.6 million and $56.8 million of unbilled receivables, respectively. For the quarter ended March 31, 2017, there were 6 projects representing approximately 12% of the Company’s total revenues and approximately 16% of its product revenues that were accounted for using percentage-of-completion accounting, compared to 9 projects during the first quarter of 2016, which represented approximately 15% of the Company’s total revenues and approximately 18% of its product revenues.
Revenues not recognized under the percentage-of-completion method
Revenues from the sale of inventory products, not accounted for under the percentage-of-completion method, are recorded at the time the manufacturing processes are complete and ownership is transferred to the customer.
Service revenues
The Company recognizes service revenues from three sources:
technical advisory assistance;
rental of running tools; and
rework and reconditioning of customer-owned Dril-Quip products.
The Company does not install products for its customers, but it does provide technical advisory assistance. At the time of delivery of the product, the customer is not obligated to buy or rent the Company’s running tools and the Company is not obligated to perform any subsequent services relating to installation. Technical advisory assistance service revenue is recorded at the time the service is rendered. Service revenues associated with the rental of running and installation tools are recorded as earned. Rework and reconditioning service revenues are recorded when the refurbishment process is complete.

8


The Company normally negotiates contracts for products, including those accounted for under the percentage-of-completion method, and services separately. For all product sales, it is the customer’s decision as to the timing of the product installation as well as whether Dril-Quip running tools will be purchased or rented. Furthermore, the customer is under no obligation to utilize the Company’s technical advisory assistance services. The customer may use a third party or their own personnel.
Fair Value of Financial Instruments
The Company’s financial instruments consist primarily of cash and cash equivalents, receivables and payables. The carrying values of these financial instruments approximate their respective fair values as they are short-term in nature.
Earnings Per Share
Basic earnings per common share is computed by dividing net income by the weighted average number of shares of common stock outstanding during the period. Diluted earnings per common share is computed considering the dilutive effect of stock options and awards using the treasury stock method.
In each relevant period, the net income used in the basic and dilutive earnings per share calculations is the same. The following table reconciles the weighted average basic number of common shares outstanding and the weighted average diluted number of common shares outstanding for the purpose of calculating basic and diluted earnings per share:
 
Three months ended
March 31,
 
2017
 
2016
 
(In thousands)
Weighted average common shares outstanding—basic
37,525

 
37,752

Dilutive effect of common stock options and awards
168

 
95

Weighted average common shares outstanding—diluted
37,693

 
37,847

3. New Accounting Standards
In January 2017, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) 2017-04, “Intangibles - Goodwill and Other (Topic 350).”  The standard simplifies the subsequent measurement of goodwill by removing the second step of the two-step impairment test.  The amendment requires an entity to perform its annual or interim goodwill impairment test by comparing the fair value of a reporting unit with its carrying amount.  An impairment charge should be recognized for the amount by which the carrying amount exceeds the reporting unit's fair value; however, the loss recognized should not exceed the total amount of goodwill allocated to that reporting unit.  An entity still has the option to perform the qualitative assessment for a reporting unit to determine if the quantitative impairment test is necessary.  The amendment should be applied on a prospective basis.  The standard is effective for fiscal years beginning after December 15, 2019, including interim periods within those fiscal years.  Early adoption is permitted for interim or annual goodwill impairment tests performed on testing dates after January 1, 2017.  The Company is evaluating the impact of the new standard on its consolidated financial statements.
In January 2017, the FASB issued ASU 2017-01, “Business Combinations: Clarifying the Definition of a Business (Topic 805).” This update clarifies the definition of a business with the objective of adding guidance to assist entities with evaluating whether transactions should be accounted for as acquisitions (or disposals) of assets or businesses. For public business entities, the amendments in this update are effective for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. The Company is evaluating the impact of the new standard on its consolidated financial statements.
In March 2016, the FASB issued ASU 2016-09 “Improvements to Employee Share-Based Payment Accounting (Topic 718).” The standard simplifies several aspects of accounting for share-based payment transactions, including the accounting for income taxes, forfeitures and statutory withholding requirements, as well as classification in the statement of cash flows. The standard is effective for annual periods beginning after December 15, 2016, including interim periods within those fiscal years. The Company adopted this standard as of January 1, 2017. The primary impact of this standard is the income tax effects of awards recognized when the awards are vested or settled is now reflected in the statement of cash flows as part of net income from operating activities.
In February 2016, the FASB issued ASU 2016-02 “Leases (Topic 842).” The new standard requires lessees to recognize lease assets (right of use) and lease obligations (lease liability) for leases previously classified as operating leases under generally accepted accounting principles on the balance sheet for leases with terms in excess of 12 months. The standard is effective for annual periods beginning after December 15, 2018, including interim periods within those fiscal years. The Company is evaluating the impact of the new standard on its consolidated financial statements.

9


In November 2015, the FASB issued ASU 2015-17 “Income Taxes (Topic 740)." The new standard requires that deferred tax assets and liabilities be classified as noncurrent on a classified balance sheet. The Company adopted this standard in the first quarter of 2017 on a prospective basis.
In May 2014, the FASB issued ASU 2014-09 “Revenue from Contracts with Customers (Topic 606).” The amendment applies a new five-step revenue recognition model to be used in recognizing revenues associated with customer contracts. The amendment requires disclosure sufficient to enable readers of financial statements to understand the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers, including qualitative and quantitative disclosures, significant judgments and changes in judgments and assets recognized from the costs to obtain or fulfill the contract. The standard’s effective date was originally for fiscal years beginning after December 15, 2016, including interim periods within that reporting period. On April 1, 2015, the FASB voted to defer the effective date by one year to December 15, 2017 and interim periods within annual reporting periods beginning after December 15, 2017. The new revenue standard permits companies to either apply the requirements retrospectively to all prior periods presented or apply the requirements in the year of adoption through a cumulative adjustment. The Company is in the process of assessing differences between the new revenue standard and current accounting practices (gap analysis). Remaining implementation matters include completing the gap analysis, establishing new policies, procedures and controls, and quantifying any adjustments upon adoption. The Company has not yet determined if it will apply the full retrospective or the modified retrospective method.
4. Business Acquisitions
On October 14, 2016, the Company entered into an agreement with Pearce Industries, Inc. to acquire all the outstanding common stock, par value $100.00 per share, of TIW Corporation (TIW) for a cash purchase price of $142.7 million, which is subject to customary adjustments for cash and working capital. The acquisition closed on November 10, 2016 and is expected to strengthen the Company's liner hanger sales and increase market share. Additionally, the acquisition of TIW gives Dril-Quip a presence in the onshore oil and gas market.
Total acquisition costs since inception through March 31, 2017 in connection with the purchase of TIW were $2.5 million. These costs were expensed in general and administrative costs as of December 31, 2016.
Purchase Price Allocation
Acquired assets and liabilities were recorded at estimated fair value as of the acquisition date. The excess of the purchase price over the estimated fair value of tangible and intangible identifiable net assets resulted in the recognition of goodwill of $34.4 million, the majority of which is included in long-lived assets in the Western Hemisphere and is attributable to expected synergies from combining operations as well as intangible assets which do not qualify for separate recognition. The amount of goodwill that is deductible for income tax purposes is not significant.
The goodwill was determined on the basis of the fair values of the tangible and intangible assets and liabilities as of the acquisition date. It may be adjusted if the provisional fair values change as a result of circumstances existing at the acquisition date. Such fair value adjustments may arise in respect to intangible assets, inventories and property, plant and equipment, upon completion of the necessary valuations and physical verifications of such assets. The amount of deferred taxes may also be adjusted during the measurement period. For further information regarding goodwill, see Note 7.

10


The following table sets forth the preliminary purchase price allocation, which was based on fair value of assets acquired and liabilities assumed at the acquisition date, November 10, 2016:
 
Valuation at November 10, 2016
 
(In thousands)
Cash
$
1,829

Trade receivables
9,794

Inventories
29,896

Prepaid and other current assets
3,572

Deferred income taxes
205

Property, plant and equipment
38,058

Intangible assets (1)
29,808

Total assets acquired
$
113,162

 
 
Accounts payable
5,599

Customer prepayments
2,757

Other accrued liabilities
2,644

Deferred tax liabilities, non-current
2,261

Total liabilities assumed
$
13,261

 
 
Net identifiable assets acquired
$
99,901

Goodwill
34,371

Net assets acquired
$
134,272

(1) Includes $3.3 million of patents with a weighted average useful life of 10 years, $8.4 million of tradenames with an indefinite life and $18.1 million of customer relationships with a weighted average useful life of 15 years. See Note 8 for further information regarding intangible assets.
Summary of Unaudited Pro Forma Information
TIW's results of operations have been included in Dril-Quip's financial statements for the period subsequent to the closing of the acquisition on November 10, 2016. Business acquired from TIW contributed revenues of $15.7 million, a pre-tax operating loss of $1.9 million and a net loss of $0.9 million for the three months ending March 31, 2017.
The following table reflects the unaudited pro forma consolidated results of operations for the comparable period presented, as though the acquisition of TIW had occurred on January 1, 2016:
 
Three months ended March 31, 2016
 
(In thousands, except per share data)
 
(unaudited)
Revenues
$
188,060

Net income
$
36,737

Basic earnings per share
$
0.97

Diluted earnings per share
$
0.97

The unaudited pro forma financial information is presented for illustrative purposes only and is not indicative of the results of operations that would have been realized if the acquisition had been completed on the date indicated, nor is it indicative of future operating results. The pro forma results do not include, for example, the effects of anticipated synergies from the acquisition.
On January 6, 2017, the Company acquired The Technologies Alliance Inc. d/b/a OilPatch Technologies (OPT) for approximately $20.0 million, which is subject to customary adjustments for cash and working capital. The acquisition was accounted for as a business combination in accordance with ASC 805. The purchase price was subject to closing adjustments and was funded with cash on hand. The acquisition and purchase price allocation do not meet the significant subsidiary test

11


outlined in Regulation S-X Rule 1-02. The acquisition does not have a material impact on the Company's Consolidated Balance Sheets. OPT's results of operations for the periods prior to this acquisition were not material to the Company's Consolidated Statements of Operations.
5. Stock-Based Compensation and Stock Awards
During the three months ended March 31, 2017 and 2016, the Company recognized approximately $3.2 million and $3.2 million, respectively, of stock-based compensation expense, which is included in the selling, general and administrative expense line on the Condensed Consolidated Statements of Income. No stock-based compensation expense was capitalized during the three months ended March 31, 2017 or 2016.
6. Inventories, net
Inventories consist of the following:
 
March 31,
2017
 
December 31,
2016
 
(In thousands)
Raw materials
$
82,154

 
$
85,684

Work in progress
76,070

 
81,645

Finished goods
235,783

 
233,732

 
394,007

 
401,061

Less: allowance for obsolete and excess inventory
(47,270
)
 
(45,648
)
Net inventory
$
346,737

 
$
355,413


12



7. Goodwill
The changes in the carrying amount of goodwill by reporting unit during the three months ended March 31, 2017 were as follows:
 
Carrying Value
 
Carrying Value
 
December 31, 2016
Acquisitions(1)
March 31, 2017
 
(In thousands)
Western Hemisphere
$
26,632

$
12,143

$
38,775

Eastern Hemisphere
7,739


7,739

Asia-Pacific



Total
$
34,371

$
12,143

$
46,514

(1) Primarily relates to goodwill additions as a result of the OPT acquisition.

8. Intangible Assets
Intangible assets, substantially all of which were acquired in the acquisition of TIW and OPT, consist of the following:
 
Estimated
Useful Lives
 
March 31, 2017
 
December 31, 2016
 
Gross Book Value
Accumulated Amortization
Net Book Value
 
Gross Book Value
Accumulated Amortization
Net Book Value
 
 
 
(In thousands)
Trademarks
indefinite
 
$
8,408

$

$
8,408

 
$
8,416

$

$
8,416

Patents
15 - 30 years
 
5,944

459

5,485

 
3,583

294

3,289

Customer relationships
5 - 15 years
 
26,440

648

25,792

 
18,057

168

17,889

Noncompete Agreements
3 years
 
171

13

158

 



 
 
 
$
40,963

$
1,120

$
39,843

 
$
30,056

$
462

$
29,594

Amortization expense for the three months ended March 31, 2017 and 2016 was $0.7 million and none, respectively.


13


9. Geographic Areas
 
Three months ended
March 31,
 
2017
 
2016
 
(In thousands)
Revenues:
 
 
 
Western Hemisphere
 
 
 
Products
$
65,288

 
$
78,600

Services
18,462

 
16,993

Intercompany
5,903

 
10,711

Total
$
89,653

 
$
106,304

Eastern Hemisphere
 
 
 
Products
$
13,926

 
$
33,161

Services
6,275

 
13,004

Intercompany
31

 
185

Total
$
20,232

 
$
46,350

Asia-Pacific
 
 
 
Products
$
12,378

 
$
23,433

Services
2,899

 
1,370

Intercompany
66

 
280

Total
$
15,343

 
$
25,083

Summary
 
 
 
Products
$
91,592

 
$
135,194

Services
27,636

 
31,367

Intercompany
6,000

 
11,176

Eliminations
(6,000
)
 
(11,176
)
Total
$
119,228

 
$
166,561

Depreciation and amortization:
 
 
 
Western Hemisphere
$
7,735

 
$
5,248

Eastern Hemisphere
1,080

 
1,323

Asia-Pacific
1,017

 
1,204

Total
$
9,832

 
$
7,775

Income before income taxes:
 
 
 
Western Hemisphere
$
(5,373
)
 
$
24,956

Eastern Hemisphere
3,491

 
16,684

Asia-Pacific
1,844

 
6,113

Eliminations
90

 
2,068

Total
$
52

 
$
49,821


14


 
March 31,
2017
 
December 31,
2016
 
(In thousands)
Total Long-Lived Assets:
 
 
 
Western Hemisphere
$
359,705

 
$
317,875

Eastern Hemisphere
33,698

 
33,338

Asia-Pacific
53,334

 
53,960

Eliminations
(479
)
 
(480
)
Total
$
446,258

 
$
404,693

Total Assets:
 
 
 
Western Hemisphere
$
760,297

 
$
775,358

Eastern Hemisphere
328,131

 
318,529

Asia-Pacific
376,503

 
370,043

Eliminations
(11,444
)
 
(2,526
)
Total
$
1,453,487

 
$
1,461,404

10. Commitments and Contingencies
Brazilian Tax Issue
From 2002 to 2007, the Company’s Brazilian subsidiary imported goods through the State of Espirito Santo in Brazil and subsequently transferred them to its facility in the State of Rio de Janeiro. During that period, the Company’s Brazilian subsidiary paid taxes to the State of Espirito Santo on its imports. Upon the final sale of these goods, the Company’s Brazilian subsidiary collected taxes from customers and remitted them to the State of Rio de Janeiro net of the taxes paid on importation of those goods to the State of Espirito Santo in accordance with the Company’s understanding of Brazilian tax laws.
In August 2007, the State of Rio de Janeiro served the Company’s Brazilian subsidiary with assessments to collect a state tax on the importation of goods through the State of Espirito Santo from 2002 to 2007 claiming that these taxes were due and payable to it under applicable law. The Company settled these assessments with payments to the State of Rio de Janeiro of $12.2 million in March 2010 and $3.9 million in December 2010. Approximately $7.8 million of these settlement payments were attributable to penalties, interest and amounts that had expired under the statute of limitations so that amount was recorded as an expense. The remainder of the settlement payments generated credits (recorded as a long-term prepaid tax) to be used to offset future state taxes on sales to customers in the State of Rio de Janeiro, which were subject to certification by the tax authorities. During the second quarter of 2015, the tax authorities certified approximately $8.3 million of those credits paid in 2010 and granted an additional $2.3 million in inflation-related credits. The additional amount of credits granted by the tax authorities increased long-term prepaid taxes and decreased selling, general and administrative expenses by $2.3 million.
In December 2010 and January 2011, the Company’s Brazilian subsidiary was served with two additional assessments totaling approximately $13.0 million from the State of Rio de Janeiro to cancel the credits associated with the tax payments to the State of Espirito Santo (“Santo Credits”) on the importation of goods from July 2005 to October 2007. The Santo Credits are not related to the credits described above. The Company has objected to these assessments on the grounds that they would represent double taxation on the importation of the same goods and that the Company is entitled to the credits under applicable Brazilian law. With regard to the December 2010 assessment, the Company’s Brazilian subsidiary filed an appeal with a State of Rio de Janeiro judicial court to annul the tax assessment following a ruling against the Company by the tax administration’s highest council. In connection with that appeal, the Company was required to deposit with the court approximately $3.1 million in December 2014 as the full amount of the assessment with penalties and interest. The Company filed a similar appeal in the judicial system with regard to the January 2011 assessment and was required to deposit with the court approximately $5.7 million in December 2016. The Company believes that these credits are valid and that success in the judicial court process is probable. Based upon this analysis, the Company has not accrued any liability in conjunction with this matter.
Since 2007, the Company’s Brazilian subsidiary has paid taxes on the importation of goods directly to the State of Rio de Janeiro and the Company does not expect any similar issues to exist for periods subsequent to 2007.
General
The Company operates its business and markets its products and services in most of the significant oil and gas producing areas in the world and is, therefore, subject to the risks customarily attendant to international operations and dependency on the condition of the oil and gas industry. Additionally, products of the Company are used in potentially hazardous drilling, completion, and production applications that can cause personal injury, property damage and environmental claims. Although

15


exposure to such risk has not resulted in any significant problems in the past, there can be no assurance that ongoing and future developments will not adversely impact the Company.
The Company is also involved in a number of legal actions arising in the ordinary course of business. Although no assurance can be given with respect to the ultimate outcome of such legal action, in the opinion of management, the ultimate liability with respect thereto will not have a material adverse effect on the Company’s results of operations, financial position or cash flows.

16


Item 2.        Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following is management’s discussion and analysis of certain significant factors that have affected aspects of the Company’s financial position, results of operations, comprehensive income and cash flows during the periods included in the accompanying unaudited condensed consolidated financial statements. This discussion should be read in conjunction with the Company's unaudited condensed consolidated financial statements and notes therein presented elsewhere herein as well as the discussion under “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the financial statements included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2016.
Overview
Dril-Quip, Inc., a Delaware corporation (the “Company” or “Dril-Quip”), designs, manufactures, sells and services highly engineered drilling and production equipment that is well suited primarily for use in deepwater, harsh environment and severe service applications. The Company’s principal products consist of subsea and surface wellheads, subsea and surface production trees, subsea control systems and manifolds, mudline hanger systems, specialty connectors and associated pipe, drilling and production riser systems, liner hangers, wellhead connectors, diverters and safety valves. Dril-Quip’s products are used by major integrated, large independent and foreign national oil and gas companies and drilling contractors throughout the world. Dril-Quip also provides technical advisory assistance on an as-requested basis during installation of its products, as well as rework and reconditioning services for customer-owned Dril-Quip products. In addition, Dril-Quip’s customers may rent or purchase running tools from the Company for use in the installation and retrieval of the Company’s products.
Oil and Gas Prices
The market for drilling and production equipment and services and the Company’s business are substantially dependent on the condition of the oil and gas industry and, in particular, the willingness of oil and gas companies to make capital expenditures on exploration, drilling and production operations. Oil and gas prices and the level of drilling and production activity have historically been characterized by significant volatility.
According to the Energy Information Administration (EIA) of the U.S. Department of Energy, Brent Crude oil prices per barrel are listed below for the periods covered by this report:

Brent Crude Oil Prices
Three Months Ended
Low

High

Average

Closing
March 31, 2017
$49.56

$56.34

$53.69

$52.20
March 31, 2016
26.01

40.54

33.84

36.75

According to the April 2017 release of the Short-Term Energy Outlook published by the EIA, Brent Crude oil prices are expected to average approximately $54 per barrel in 2017 and $57 per barrel in 2018. In its March 2017 Oil Market Report, the International Energy Agency projected the 2017 global oil demand will grow to 98.0 million barrels per day, a 1.4 million barrels per day increase over 2016.
Offshore Rig Count
Detailed below is the average contracted offshore rig count (rigs currently drilling as well as rigs committed, but not yet drilling) for the Company’s geographic regions for the three months ended March 31, 2017 and 2016. The rig count data includes floating rigs (semi-submersibles and drillships) and jack-up rigs. The Company has included only these types of rigs as they are the primary assets used to deploy the Company’s products.

Three months ended March 31,

2017
 
2016

Floating Rigs

Jack-up Rigs

Floating Rigs

Jack-up Rigs
Western Hemisphere
65


39


97


48

Eastern Hemisphere
54


57


71


73

Asia-Pacific
31


212


30


226

TOTAL
150


308


198


347



17


Source: IHS—Petrodata RigBase – March 31, 2017 and 2016
According to IHS-Petrodata RigBase, as of March 31, 2017, there were 455 rigs under contract for the Company’s geographic regions (148 floating rigs and 307 jack-up rigs), which represents a 15.7% decrease from the rig count of 540 rigs (193 floating rigs and 347 jack-up rigs) as of March 31, 2016.
The Company believes that the number of rigs (semi-submersibles, drillships and jack-up rigs) under construction impacts its backlog and resulting revenues because in certain cases, its customers order some of the Company’s products during the construction of such rigs. As a result, an increase in rig construction activity tends to favorably impact the Company’s backlog while a decrease in rig construction activity tends to negatively impact the Company’s backlog. According to IHS-Petrodata RigBase, as of March 31, 2017 and 2016, there were 149 and 191 rigs, respectively, under construction, which represents an approximate 22.0% decline in rigs under construction. The expected delivery dates for the rigs under construction at March 31, 2017 are as follows:

Floating

Jack-Up



Rigs

Rigs

Total
2017
19


39


58

2018
17


50


67

2019
7


10


17

2020
3


3


6

After 2020 or unspecified delivery date
1




1


47


102


149

However, given the sustained low level of oil and gas prices and oversupply of offshore drilling rigs, the Company believes it is possible that delivery of some rigs under construction could be postponed or cancelled, limiting the opportunity for supply of the Company’s products.
Regulation
The demand for the Company’s products and services is also affected by laws and regulations relating to the oil and gas industry in general, including those specifically directed to offshore operations. The adoption of new laws and regulations, or changes to existing laws or regulations that curtail exploration and development drilling for oil and gas for economic or other policy reasons, could adversely affect the Company’s operations by limiting demand for its products.
Business Environment
Oil and gas prices and the level of drilling and production activity have been characterized by significant volatility in recent years. Worldwide military, political, economic and other events have contributed to oil and natural gas price volatility and are likely to continue to do so in the future. Lower crude oil and natural gas prices have resulted in a trend of customers seeking to renegotiate contract terms with the Company, including reductions in the prices of its products and services, extensions of delivery terms and, in some instances, contract cancellations or revisions. In some cases, a customer may already hold an inventory of the Company's equipment, which may delay the placement of new orders. In addition, some of the Company’s customers could experience liquidity or solvency issues or could otherwise be unable or unwilling to perform under a contract, which could ultimately lead a customer to enter bankruptcy or otherwise encourage a customer to seek to repudiate, cancel or renegotiate a contract. An extended period of reduced crude oil and natural gas prices may accelerate these trends. If the Company experiences significant contract terminations, suspensions or scope adjustments to its contracts, then its financial condition, results of operations and cash flows may be adversely impacted.
The Company expects continued volatility in both crude oil and natural gas prices, as well as in the level of drilling and production related activities. Even during periods of high prices for oil and natural gas, companies exploring for oil and gas may cancel or curtail programs, seek to renegotiate contract terms, including the price of products and services, or reduce their levels of capital expenditures for exploration and production for a variety of reasons. Continued low hydrocarbon prices would likely have a material adverse effect on the Company’s results of operations.
The Company believes that its backlog should help mitigate the impact of negative market conditions; however, continued low commodity prices or an extended downturn in the global economy or future restrictions on or declines in oil and gas exploration and production could have a negative impact on the Company and its backlog. The Company’s product backlog at March 31, 2017 was approximately $296 million, compared to approximately $522 million at March 31, 2016 and approximately $318 million at December 31, 2016.

18


The following table represents the change in backlog for the three months ending March 31, 2017 and December 31, 2016:
 
Three months ended
 
March 31, 2017
December 31, 2016
 
(in thousands)
 Beginning Backlog
$317,579
$378,447
 Bookings:
 
 
 Product
71,054

62,743

 Service
27,636

25,598

 Cancellation/Revision
(3,500
)
(36,784
)
 Translation
1,993

(6,334
)
 Total Bookings
97,183

45,223

 Revenues:
 
 
 Product
91,592

80,493

 Service
27,636

25,598

 Total Revenue
119,228

106,091

 Ending Backlog
$295,534
$317,579
In August 2012, the Company’s Brazilian subsidiary, Dril-Quip do Brasil LTDA, was awarded a four-year contract by Petroleo Brasileiro S.A. (Petrobras), Brazil’s national oil company. The contract was valued at $650 million, net of Brazilian taxes, at exchange rates in effect at that time (approximately $419 million based on the March 31, 2017 exchange rate of 3.17 Brazilian real to 1.00 U.S. dollar) if all equipment under the contract was ordered. Amounts are included in the Company’s backlog as purchase orders under the contract are received. Revenues of approximately $132 million have been recognized on this contract through March 31, 2017. As of March 31, 2017, the Company’s backlog included $28 million of purchase orders under this Petrobras contract. The Company has not yet recognized revenue of approximately $8 million as of March 31, 2017 for certain items of equipment that were completed but not yet accepted for delivery by Petrobras. If Petrobras does not ultimately accept these items for delivery or if they refuse to accept these or similar items completed in the future, the Company’s results of operations may be adversely affected. Following an interim amendment to extend the term of the contract pending the resolution of discussions, the Company entered into an amendment on October 17, 2016 to extend the duration of the contract until July 2020. As part of the amendment to the contract, Petrobras agreed to issue purchase orders totaling a minimum of approximately $31 million (based on current exchange rates) before 2019. The Company cannot provide assurances that Petrobras will order all of the equipment under the contract.
As of March 31, 2016, the total number of the Company's employees was 2,273, of which 1,230 were located in the United States. The total number of the Company’s employees as of December 31, 2016 was 2,355, which includes the addition of 406 employees of TIW during the fourth quarter of 2016. Of these 2,355, 1,193 were located in the United States. As a result of additional worldwide reductions in workforce and natural attrition, the total number of employees as of March 31, 2017 was reduced to 2,146, an 8.9% reduction from December 31, 2016. Of these 2,146, 1,214 were located in the United States. Also, the Company recognized $1.6 million in severance costs due to the workforce reductions in the first quarter of 2017. In addition, reductions in pay, estimated at approximately $10.0 million on an annualized basis, were instituted globally during the first quarter of 2017.
The Company operates its business and markets its products and services in most of the significant oil and gas producing areas in the world and is, therefore, subject to the risks customarily attendant to international operations and investments in foreign countries. These risks include nationalization, expropriation, war, acts of terrorism and civil disturbance, restrictive action by local governments, limitation on repatriation of earnings, change in foreign tax laws and change in currency exchange rates, any of which could have an adverse effect on either the Company’s ability to manufacture its products in its facilities abroad or the demand in certain regions for the Company’s products or both. To date, the Company has not experienced any significant problems in foreign countries arising from local government actions or political instability, but there is no assurance that such problems will not arise in the future. Interruption of the Company’s international operations could have a material adverse effect on its overall operations.
Revenues. Dril-Quip’s revenues are generated from two sources: products and services. Product revenues are derived from the sale of drilling and production equipment. Service revenues are earned when the Company provides technical advisory assistance and rental tools during installation and retrieval of the Company’s products. Additionally, the Company earns service revenues when rework and reconditioning services are provided. For the three months ended March 31, 2017 and

19


2016, the Company derived 77% and 81%, respectively, of its revenues from the sale of its products and 23% and 19%, respectively, of its revenues from services. Service revenues generally correlate to revenues from product sales because increased product sales typically generate increased demand for technical advisory assistance services and rental of running tools during installation. The Company has substantial international operations, with approximately 48% and 57% of its revenues derived from foreign sales for the three months ended March 31, 2017 and 2016, respectively. The majority of the Company’s domestic revenue relates to operations in the U.S. Gulf of Mexico. Domestic revenue approximated 52% and 43% of the Company’s total revenues for the three months ended March 31, 2017 and 2016, respectively.
Product contracts are negotiated and sold separately from service contracts. In addition, service contracts are not typically included in the product contracts or related sales orders and are not offered to the customer as a condition of the sale of the Company’s products. The demand for products and services is generally based on world-wide economic conditions in the oil and gas industry, and is not based on a specific relationship between the two types of contracts. Substantially all of the Company’s sales are made on a purchase order basis. Purchase orders are subject to change and/or termination at the option of the customer. In case of a change or termination, the customer is required to pay the Company for work performed and other costs necessarily incurred as a result of the change or termination.
Generally, the Company attempts to raise its prices as its costs increase. However, the actual pricing of the Company’s products and services is impacted by a number of factors, including global oil prices, competitive pricing pressure, the level of utilized capacity in the oil service sector, maintenance of market share, the introduction of new products and general market conditions.
The Company accounts for larger and more complex projects that have relatively longer manufacturing time frames on a percentage-of-completion basis. For the quarter ended March 31, 2017, there were 6 projects representing approximately 12% of the Company’s total revenues and approximately 16% of its product revenues that were accounted for using percentage-of-completion accounting, compared to 9 projects during the first quarter of 2016, which represented approximately 15% of the Company’s total revenues and approximately 18% of its product revenues. This percentage may fluctuate in the future. Revenues accounted for in this manner are generally recognized based upon a calculation of the percentage complete, which is used to determine the revenue earned and the appropriate portion of total estimated cost of sales to be recognized. Accordingly, price and cost estimates are reviewed periodically as the work progresses, and adjustments proportionate to the percentage complete are reflected in the period when such estimates are revised. Losses, if any, are recorded in full in the period they become known. Amounts received from customers in excess of revenues recognized are classified as a current liability.
Cost of Sales. The principal elements of cost of sales are labor, raw materials and manufacturing overhead. Cost of sales as a percentage of revenues is influenced by the product mix sold in any particular period, costs from projects accounted for under the percentage-of-completion method, over/under manufacturing overhead absorption, pricing and market conditions. The Company’s costs related to its foreign operations do not significantly differ from its domestic costs.
Selling, General and Administrative Expenses. Selling, general and administrative expenses include the costs associated with sales and marketing, general corporate overhead, business development expenses, compensation expense, stock-based compensation expense, legal expenses, foreign currency transaction gains and losses and other related administrative functions. The Company’s U.K. subsidiary, whose functional currency is the British pound sterling, conducts a portion of its operations in U.S. dollars. As a result, this subsidiary holds significant monetary assets denominated in U.S. dollars. These monetary assets are subject to changes in exchange rates between the U.S. dollar and the British pound sterling, which may result in pre-tax non-cash foreign currency gains or losses.
Engineering and Product Development Expenses. Engineering and product development expenses consist of new product development and testing, as well as application engineering related to customized products.
Income Tax Provision. The Company’s effective income tax rate has historically been lower than the statutory rate primarily due to foreign income tax rate differentials, research and development credits and deductions related to domestic manufacturing activities.

20



Results of Operations
The following table sets forth, for the periods indicated, certain statement of operations data expressed as a percentage of revenues:
 
Three months ended
March 31,
 
2017
 
2016
Revenues:
 
 
 
Products
76.8
 %
 
81.2
%
Services
23.2

 
18.8

Total revenues:
100.0

 
100.0

Cost of sales:
 
 
 
Products
55.7

 
46.2

Services
13.4

 
9.7

Total cost of sales:
69.1

 
55.9

Selling, general and administrative expenses
21.7

 
8.0

Engineering and product development expenses
9.9

 
6.5

Operating income
(0.7
)
 
29.6

Interest income
0.8

 
0.3

Income before income taxes
0.1

 
29.9

Income tax provision

 
7.8

Net income
0.1
 %
 
22.1
%

The following table sets forth, for the periods indicated, a breakdown of our products and service revenues:

Three months ended
March 31,

2017

2016

(In millions)
Revenues:



Products



Subsea equipment
$
74.3

 
$
120.6

Downhole tools
11.3

 
0.5

Offshore rig equipment
5.1

 
10.0

Surface equipment
0.9

 
4.1

Total products
91.6


135.2

Services
27.6


31.4

Total revenues
$
119.2


$
166.6

Three Months Ended March 31, 2017 Compared to Three Months Ended March 31, 2016
Revenues. Revenues decreased by $47.3 million, or approximately 28.4%, to $119.2 million in the three months ended March 31, 2017 from $166.6 million in the three months ended March 31, 2016, primarily due to a decrease in demand for exploration and production equipment. Product revenues decreased by approximately $43.6 million for the three months ended March 31, 2017 compared to the same period in 2016 as a result of decreased revenues of $46.3 million in subsea equipment, $4.9 million in offshore rig equipment and $3.2 million in surface equipment, offset by an increase of $10.8 million in downhole tools, primarily due to the acquisition of TIW. Product revenues decreased in the Eastern, Western and Asia-Pacific

21


Hemispheres by $19.2 million, $13.3 million, and $11.1 million, respectively, largely due to low oil and gas prices resulting in decreases in the demand for exploration and production equipment, especially subsea equipment. In any given time period, the revenues recognized between the various product lines and geographic areas will vary depending upon the timing of shipments to customers, completion status of the projects accounted for under the percentage-of-completion accounting method, market conditions and customer demand. Service revenues decreased by approximately $3.7 million resulting from decreased service revenues in the Eastern Hemisphere of $6.7 million, partially offset by increases in the Western Hemisphere of $1.5 million and Asia-Pacific of $1.5 million. The majority of the decreases in service revenues related to decreased technical advisory assistance, largely due to low oil and gas prices leading to decreased exploration and production activities.
Cost of Sales. Cost of sales decreased by $10.7 million, or approximately 11.4%, to $82.4 million for the three months ended March 31, 2017 from $93.1 million for the same period in 2016 as a result of lower revenues. As a percentage of revenues, cost of sales increased to 69.1% from 55.9% in the three months ended March 31, 2017 as compared to the same period in 2016, primarily as result of product mix, pricing concessions and unabsorbed manufacturing costs.
Selling, General and Administrative Expenses. For the three months ended March 31, 2017, selling, general and administrative expenses increased by approximately $12.6 million, or 95.1%, to $25.8 million from $13.2 million for the same period in 2016, primarily due to the inclusion of TIW expenses of $6.6 million, offset by a reduction in personnel and related costs associated with lower headcount during the first quarter of 2017. In addition, the Company experienced a pre-tax foreign currency transaction gain of $0.1 million in the first quarter of 2017 compared to a gain of $7.3 million in the first quarter of 2016. Selling, general and administrative expenses as a percentage of revenues increased to 21.7% in the first quarter of 2017 from 8.0% in the first quarter of 2016.
Engineering and Product Development Expenses. For the three months ended March 31, 2017, engineering and product development expenses totaled $11.9 million compared to $10.9 million for the same period in 2016, an increase of $1.0 million, or 8.7%. The majority of the increase was due to the inclusion of TIW expenses of $1.2 million, offset by a reduction in personnel and related costs associated with lower headcount during the first quarter of 2017. Engineering and product development expenses as a percentage of revenues increased to 9.9% in the first quarter of 2017 from 6.5% in the first quarter of 2016.
Income Tax Provision. Income tax benefit for the three months ended March 31, 2017 was $42,000 on income before taxes of $52,000. Income tax expense for the three months ended March 31, 2016 was $13.1 million on income before taxes of $49.8 million, resulting in an effective income tax rate of approximately 26.2%. Historically, the change in the effective income tax rate percentage primarily reflects the changes in taxable income among the Company’s three geographic areas, which have different income tax rates.
Net Income. Net income was approximately $94,000 for the three months ended March 31, 2017 and $36.8 million for the same period in 2016 for the reasons set forth above.





22




Non-GAAP Financial Measures
Net Income (GAAP) to Adjusted Net Income Reconciliation.
Net income, which is calculated in accordance with GAAP, represents the sum of operations, interest and provision for income taxes. Adjusted net income represents net income plus the adjustments for recent acquisitions, severance payments, inventory valuation, acquisition costs and the effect of foreign exchange gains or losses. These items are excluded from adjusted net income internally when evaluating our operating performance and for strategic planning and forecasting purposes. Recent acquisitions are excluded in the adjusted net income calculation until integration is fully achieved. Management believes that net income and adjusted net income, when viewed with the Company’s results under GAAP and the accompanying reconciliation, provides useful information about operating performance and period-over-period growth, and allows investors to make a more meaningful comparison between our core business operating results over different periods of time, as well as with those of other similar companies. Additionally, management believes that net income and adjusted net income help investors gain an understanding of the factors and trends affecting our ongoing earnings.
The table below provides a reconciliation between net income and diluted earnings per share, which are calculated in accordance with GAAP, to the respective non-GAAP financial measures of adjusted net income and adjusted diluted earnings per share:
 
 
Three months ended
 
 
March 31, 2017
 
December 31, 2016
 
March 31, 2016
 
 
Effect on net income (after-tax)
 
Impact on diluted earnings per share
 
Effect on net income (after-tax)
 
Impact on diluted earnings per share
 
Effect on net income (after-tax)
 
Impact on diluted earnings per share
 
 
 
 
Net income
$
94

 
$

 
$
1,302

 
$
0.03

 
$
36,769

 
$
0.97

Adjustments (after tax)
 
 
 
 
 
 
 
 
 
 
 
Add back: Net loss from TIW
902

 
0.02

 
3,070

 
0.08

 

 

Add back: Severance payments
1,266

 
0.03

 

 

 

 

Add back: Inventory valuation adjustments

 

 
4,836

 
0.13

 

 

Add back: Acquisition costs

 

 
2,557

 
0.07

 

 

Less: The effect of foreign currency
(84
)
 

 
(2,917
)
 
(0.08
)
 
(5,383
)
 
(0.14
)
Total adjustments
2,084

 
0.05

 
7,546

 
0.20

 
(5,383
)
 
(0.14
)
Adjusted net income
$
2,178

 
$
0.05

 
$
8,848

 
$
0.23

 
$
31,386

 
$
0.83

Adjusted net income does not measure financial performance under GAAP and, accordingly, should not be considered as an alternative to net income as an indicator of operating performance.









23


Liquidity and Capital Resources
Cash flows provided by (used in) type of activity were as follows:
 
Three Months Ended March 31,
 
2017
 
2016
 
(In thousands)
Operating activities
$
11,476

 
$
52,523

Investing activities
(24,277
)
 
(7,656
)
Financing activities
403

 
166

 
(12,398
)
 
45,033

Effect of exchange rate changes on cash activities
3,091

 
(3,003
)
Increase (decrease) in cash and cash equivalents
$
(9,307
)
 
$
42,030


Statements of cash flows for entities with international operations that are local currency functional exclude the effects of the changes in foreign currency exchange rates that occur during any given period, as these are non-cash changes. As a result, changes reflected in certain accounts on the Condensed Consolidated Statements of Cash Flows may not reflect the changes in corresponding accounts on the Condensed Consolidated Balance Sheets.
The primary liquidity needs of the Company are (i) to fund capital expenditures to improve and expand facilities and manufacture additional running tools and (ii) to fund working capital. The Company’s principal source of funds is cash flows from operations.
Net cash provided by operating activities for the first quarter of 2017 was $11.5 million as compared to $52.5 million in the first quarter of 2016. The decrease is primarily due to decreases in operating assets and liabilities of $6.3 million and lower net income of $36.7 million.
The change in operating assets and liabilities for the three months ended March 31, 2017 resulted in a $0.5 million decrease in cash. Trade receivables decreased $7.0 million primarily due to an increase in customer collection efforts. Inventory decreased by $11.6 million. Prepaids and other assets decreased by $3.1 million due to decreases in vendor prepayments. Accounts payable and accrued expenses decreased by approximately $22.2 million primarily due to a reduction in accounts payable of $11.2 million and customer prepayments of $5.3 million.
The change in operating assets and liabilities for the three months ended March 31, 2016 resulted in a $5.8 million increase in cash. Trade receivables increased $8.9 million primarily due to delays in customer collections from a tightening oil and gas market. Inventory slightly decreased by $1.9 million. Prepaids and other assets decreased by $8.1 million due to decreases in vendor prepayments. Accounts payable and accrued expenses increased by approximately $4.8 million due to a reduction in customer prepayments of $5.8 million.
Capital expenditures by the Company were $4.8 million and $7.7 million in the three months ended March 31, 2017 and 2016, respectively. The capital expenditures for the first quarter of 2017 were $2.7 million for machinery and equipment and other expenditures of $2.1 million. The capital expenditures for the first quarter of 2016 were $6.2 million for machinery and equipment and other expenditures of $1.5 million.
The Company acquired The Technologies Alliance Inc. d/b/a OilPatch Technologies (OPT) for approximately $19.9 million, net of cash and working capital adjustments, during the first quarter of 2017.
The exercise of stock options generated cash to the Company of $403,000 in the first quarter of 2017 as compared to $155,000 in the same period of 2016.
On July 26, 2016, the Board of Directors authorized a stock repurchase plan under which the Company can repurchase up to $100 million of its common stock. The repurchase plan has no set expiration date and any repurchased shares are expected to be cancelled. No repurchases have been made pursuant to this plan as of March 31, 2017
As of March 31, 2017, the Company has no commercial lending arrangement or lines of credit. The Company believes that cash generated from operations plus cash on hand will be sufficient to fund operations, working capital needs and anticipated capital expenditure requirements for the next twelve months. However, continued low hydrocarbon prices, catastrophic events or significant changes in regulations affecting the Company or its customers could have a material adverse

24


effect on the Company’s liquidity. Should market conditions result in unexpected cash requirements, the Company believes that borrowing from commercial lending institutions would be available and adequate to meet such requirements.
Off-Balance Sheet Arrangements
The Company has no derivative instruments and no off-balance sheet hedging or financing arrangements, contracts or operations.
Other Matters
From time to time, the Company enters into discussions or negotiations to acquire other businesses or enter into joint ventures. The timing, size or success of any such efforts and the associated potential capital commitments are unpredictable and dependent on market conditions and opportunities existing at the time. The Company may seek to fund all or part of any such efforts with proceeds from debt or equity issuances. Debt or equity financing may not, however, be available at that time due to a variety of events, including, among others, the Company’s credit ratings, industry conditions, general economic conditions and market conditions.
Critical Accounting Policies
Refer to our Annual Report on Form 10-K for the year ended December 31, 2016 for a discussion of our critical accounting policies. During the three months ended March 31, 2017, there were no material changes in our judgments and assumptions associated with the development of our critical accounting policies.

Item 3.        Quantitative and Qualitative Disclosures About Market Risk
The Company is currently exposed to certain market risks related to interest rate changes on its short-term investments and fluctuations in foreign exchange rates. The Company does not engage in any material hedging transactions, forward contracts or currency trading which could mitigate the market risks inherent in such transactions. There have been no material changes in market risks for the Company since December 31, 2016.
Foreign Exchange Rate Risk
The Company has operations in various countries around the world and conducts business in a number of different currencies. Our significant foreign subsidiaries may also have monetary assets and liabilities not denominated in their functional currency. These monetary assets and liabilities are exposed to changes in currency exchange rates which may result in non-cash gains and losses primarily due to fluctuations between the U.S. dollar and each subsidiary's functional currency.
The Company experienced a foreign currency pre-tax gain of approximately $0.1 million during the three-month period ended March 31, 2017 and a pre-tax gain of $7.3 million in the same quarter of 2016. These gains were primarily due to the exchange rate fluctuations between the U.S. dollar and the British pound sterling.
The Company does not engage in any material hedging transactions, forward contracts or currency trading which could mitigate the effects and risks inherent in such transactions. Additionally, there is no assurance that the Company will be able to protect itself against currency fluctuations in the future.

Item 4.        Controls and Procedures
In accordance with Exchange Act Rules 13a-15 and 15d-15, the Company carried out an evaluation, under the supervision and with the participation of management, including the Company’s Chief Executive Officer and Chief Financial Officer, of the effectiveness of the Company’s disclosure controls and procedures as of the end of the period covered by this report. Based on that evaluation, the Company’s Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of March 31, 2017 to provide reasonable assurance that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and such information is accumulated and communicated to management, including the Company’s Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding disclosure.
There has been no change in the Company’s internal controls over financial reporting that occurred during the quarter ended March 31, 2017 that has materially affected, or is reasonably likely to materially affect, the Company’s internal controls over financial reporting.

25



PART II—OTHER INFORMATION
Item 1.        Legal Proceedings
For a description of the Company’s legal proceedings, see “Commitments and Contingencies,” Note 7 to the Notes to Condensed Consolidated Financial Statements.

Item 1A.    Risk Factors
There have been no material changes from the risk factors disclosed in the Company’s Annual Report on Form 10-K for the year ended December 31, 2016.

Item 2.        Unregistered Sales of Equity Securities and Use of Proceeds
None.


26


FORWARD LOOKING STATEMENTS
This Quarterly Report on Form 10-Q includes certain statements that may be deemed to be “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Statements contained in all parts of this document that are not historical facts are forward-looking statements that involve risks and uncertainties that are beyond the control of Dril-Quip, Inc. (the “Company” or “Dril-Quip”). You can identify the Company’s forward-looking statements by the words “anticipate,” “estimate,” “expect,” “may,” “project,” “believe” and similar expressions, or by the Company’s discussion of strategies or trends. Although the Company believes that the expectations reflected in such forward-looking statements are reasonable, no assurance can be given that these expectations will prove to be correct. These forward-looking statements include the following types of information and statements as they relate to the Company:
future operating results and cash flow;
scheduled, budgeted and other future capital expenditures;
working capital requirements;
the need for and the availability of expected sources of liquidity;
the introduction into the market of the Company’s future products;
the market for the Company’s existing and future products;
the Company’s ability to develop new applications for its technologies;
the exploration, development and production activities of the Company’s customers;
compliance with present and future environmental regulations and costs associated with environmentally related penalties, capital expenditures, remedial actions and proceedings;
effects of pending legal proceedings;
changes in customers’ future product and service requirements that may not be cost effective or within the Company’s capabilities; and
future operations, financial results, business plans and cash needs.
These statements are based on assumptions and analyses in light of the Company’s experience and perception of historical trends, current conditions, expected future developments and other factors the Company believes were appropriate in the circumstances when the statements were made. Forward-looking statements by their nature involve substantial risks and uncertainties that could significantly impact expected results, and actual future results could differ materially from those described in such statements. While it is not possible to identify all factors, the Company continues to face many risks and uncertainties. Among the factors that could cause actual future results to differ materially are the risks and uncertainties discussed under “Item 1A. Risk Factors” in Part I of the Company’s Annual Report on Form 10-K for the year ended December 31, 2016 and the following:
the volatility of oil and natural gas prices;
the cyclical nature of the oil and gas industry;
uncertainties associated with the United States and worldwide economies;
uncertainties regarding political tensions in the Middle East, South America, Africa and elsewhere;
current and potential governmental regulatory actions in the United States and regulatory actions and political unrest in other countries;
uncertainties regarding future oil and gas exploration and production activities, including new regulations, customs requirements and product testing requirements;
operating interruptions (including explosions, fires, weather-related incidents, mechanical failure, unscheduled downtime, labor difficulties, transportation interruptions, spills and releases and other environmental risks);
project terminations, suspensions or scope adjustments to contracts reflected in the Company’s backlog;
the Company’s reliance on product development;
technological developments;
the Company’s reliance on third-party technologies;

27


acquisition and merger activities involving the Company or its competitors;
the Company’s dependence on key employees and skilled machinists, fabricators and technical personnel;
the Company’s reliance on sources of raw materials;
impact of environmental matters, including future environmental regulations;
competitive products and pricing pressures;
fluctuations in foreign currency, including those attributable to the Brexit;
the ability of the Organization of Petroleum Exporting Countries (OPEC) to set and maintain production levels and pricing;
the Company’s reliance on significant customers;
creditworthiness of the Company’s customers;
fixed-price contracts;
changes in general economic, market or business conditions;
access to capital markets;
negative outcome of litigation, threatened litigation or government proceedings;
terrorist threats or acts, war and civil disturbances; and
changes to, and differing interpretations of, tax laws with respect to our operations and subsidiaries.
Many of such factors are beyond the Company’s ability to control or predict. Any of the factors, or a combination of these factors, could materially affect the Company’s future results of operations and the ultimate accuracy of the forward-looking statements. Management cautions against putting undue reliance on forward-looking statements or projecting any future results based on such statements or present or prior earnings levels. Every forward-looking statement speaks only as of the date of the particular statement, and the Company undertakes no obligation to publicly update or revise any forward-looking statement.

28


Item 6.
(a) Exhibits
The following exhibits are filed herewith:
Exhibit No.
 
Description
*3.1
Restated Certificate of Incorporation of the Company (incorporated herein by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed on May 20, 2014).
 
 
 
*3.2
Certificate of Designations of Series A Junior Participating Preferred Stock of the Company (incorporated herein by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed on November 25, 2008).
 
 
 
*3.3
Amended and Restated Bylaws of the Company (incorporated herein by reference to Exhibit 3.2 to the Company’s Current Report on Form 8-K filed on May 20, 2014).
 
 
 
*4.1
Form of certificate representing Common Stock (incorporated herein by reference to Exhibit 4.2 to the Company’s Registration Statement on Form S-1 (Registration No. 333-33447).
 
 
 
*4.2
Rights Agreement dated as of November 24, 2008 between Dril-Quip, Inc. and Mellon Investor Services LLC, as Rights Agent (incorporated herein by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-K filed on November 25, 2008).
 
 
 
*10.1

Employment Agreement, dated as of March 7, 2017, between the Company and Jeffrey J. Bird (incorporated herein by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on March 9, 2017).
 
 
 
*10.2
Form of Indemnification Agreement (incorporated herein by reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K filed on March 9, 2017).
 
 
 
*10.3
Employment Agreement, dated as of March 7, 2017, between the Company and Jerry M. Brooks (incorporated herein by reference to Exhibit 10.3 to the Company’s Current Report on Form 8-K filed on March 9, 2017).
 
 
 
31.1
Rule 13a-14(a)/15d-14(a) Certification of Blake T. DeBerry.
 
 
 
31.2
Rule 13a-14(a)/15d-14(a) Certification of Jeffrey J. Bird.
 
 
 
32.1
Section 1350 Certification of Blake T. DeBerry.
 
 
 
32.2
Section 1350 Certification of Jeffrey J. Bird.
 
 
 
101.INS
XBRL Instance Document
 
 
 
101.SCH
XBRL Schema Document
 
 
 
101.CAL
XBRL Calculation Document
 
 
 
101.DEF
XBRL Definition Linkbase Document
 
 
 
101.LAB
XBRL Label Linkbase Document
 
 
 
101.PRE
XBRL Presentation Linkbase Document
____________________________
*    Incorporated herein by reference as indicated.

29


SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
 
 
 
DRIL-QUIP, INC.
 
 
 
Date: April 27, 2017
BY:
/s/ Jeffrey J. Bird
 
 
Jeffrey J. Bird,
 
 
Vice President and Chief Financial Officer
 
 
(Principal Accounting Officer and
 
 
Duly Authorized Signatory)


30