Attached files

file filename
EX-32.1 - EXHIBIT 32.1 - SCI Engineered Materials, Inc.v450550_ex32-1.htm
EX-31.2 - EXHIBIT 31.2 - SCI Engineered Materials, Inc.v450550_ex31-2.htm
EX-31.1 - EXHIBIT 31.1 - SCI Engineered Materials, Inc.v450550_ex31-1.htm

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

(Mark One)

xQUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended September 30, 2016

or

 

¨TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                          to                         

 

Commission file number: 0-31641

 

SCI ENGINEERED MATERIALS, INC.

(Exact name of registrant as specified in its charter)

 

Ohio 31-1210318
(State or other jurisdiction of (I.R.S. Employer
incorporation or organization) Identification No.)

 

2839 Charter Street, Columbus, Ohio 43228

(Address of principal executive offices) (Zip Code)

 

(614) 486-0261

(Registrant’s telephone number, including area code)

 

Not Applicable

(Former name, former address and former fiscal year, if changed since last report)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¨

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer ¨ Accelerated filer ¨ Non-accelerated filer ¨ Smaller reporting company x

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x

 

4,070,223 shares of Common Stock, without par value, were outstanding at October 18, 2016.

 

   

 

 

FORM 10-Q

 

SCI ENGINEERED MATERIALS, INC.

 

Table of Contents

 

    Page No.
     
PART I.    FINANCIAL INFORMATION  
     
Item 1. Financial Statements  
     
  Balance Sheets as of September 30, 2016 (unaudited) and December 31, 2015 3
     
  Statements of Operations for the Three and Nine Months  Ended September 30, 2016 and 2015 (unaudited) 5
     
  Statements of Cash Flows for the Nine Months Ended September 30, 2016 and 2015 (unaudited) 6
     
  Notes to Financial Statements (unaudited) 7
     
Item 2. Management's Discussion and Analysis of Financial Condition and  Results of Operations 13
     
Item 3. Quantitative and Qualitative Disclosures About Market Risk N/A
     
Item 4. Controls and Procedures 19
     
PART II.    OTHER INFORMATION  
     
Item 1. Legal Proceedings N/A
     
Item 1A. Risk Factors N/A
     
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds N/A
     
Item 3. Defaults Upon Senior Securities N/A
     
Item 4. Mine Safety Disclosures N/A
     
Item 5. Other Information N/A
     
Item 6. Exhibits 21
     
Signatures 23

 

 2 

 

 

PART I. FINANCIAL INFORMATION

 

ITEM 1. FINANCIAL STATEMENTS

 

SCI ENGINEERED MATERIALS, INC.

 

BALANCE SHEETS

  

ASSETS

 

   September 30,   December 31, 
   2016   2015 
   (UNAUDITED)     
Current Assets          
Cash  $780,838   $997,170 
Accounts receivable, less allowance for doubtful accounts of $15,000 and $26,000, respectively   419,322    302,512 
Inventories   668,272    573,114 
Prepaid expenses   59,203    61,301 
Total current assets   1,927,635    1,934,097 
           
Property and Equipment, at cost          
Machinery and equipment   7,671,704    7,506,574 
Furniture and fixtures   154,245    154,245 
Leasehold improvements   329,904    329,904 
Construction in progress   45,625    - 
    8,201,478    7,990,723 
Less accumulated depreciation   (5,961,068)   (5,642,619)
    2,240,410    2,348,104 
           
Other Assets          
Deposits   15,685    16,487 
Intangibles   34,936    34,935 
Total other assets   50,621    51,422 
           
TOTAL ASSETS  $4,218,666   $4,333,623 

 

The accompanying notes are an integral part of these financial statements.

 

 3 

 

  

SCI ENGINEERED MATERIALS, INC.

 

BALANCE SHEETS

 

LIABILITIES AND SHAREHOLDERS' EQUITY

 

   September 30,   December 31, 
   2016   2015 
   (UNAUDITED)     
Current Liabilities          
Capital lease obligations, current portion  $122,774   $123,960 
Notes payable, current portion   171,052    197,328 
Accounts payable   272,858    191,475 
Customer deposits   482,834    155,800 
Accrued compensation   52,996    114,900 
Accrued expenses and other   119,110    140,117 
Total current liabilities   1,221,624    923,580 
           
Capital lease obligations, net of current portion   254,351    215,231 
Notes payable, net of current portion   264,719    393,513 
Total liabilities   1,740,694    1,532,324 
           
Commitments and contingencies          
           
Shareholders' Equity          
Convertible preferred stock, Series B, 10% cumulative, nonvoting, no par value, $10 stated value, optional  redemption at 103%; optional shareholder conversion 2 shares for 1; 24,152 shares issued and outstanding   484,248    466,134 
Common stock, no par value, authorized 15,000,000 shares; 4,069,044 and 4,016,508 shares issued and outstanding, respectively   10,034,185    9,993,027 
Additional paid-in capital   2,200,602    2,097,599 
Accumulated deficit   (10,241,063)   (9,755,461)
    2,477,972    2,801,299 
           
TOTAL LIABILITIES AND SHAREHOLDERS' EQUITY  $4,218,666   $4,333,623 

 

The accompanying notes are an integral part of these financial statements.

 

 4 

 

 

SCI ENGINEERED MATERIALS, INC.

 

STATEMENTS OF OPERATIONS

 

THREE MONTHS AND NINE MONTHS ENDED SEPTEMBER 30, 2016 AND 2015

 

(UNAUDITED)

 

   THREE MONTHS ENDED SEPT. 30,   NINE MONTHS ENDED SEPT. 30, 
   2016   2015   2016   2015 
                 
Revenue  $1,664,979   $1,464,734   $4,246,275   $6,421,227 
                     
Cost of revenue   1,294,516    1,107,409    3,329,343    4,820,010 
                     
Gross profit   370,463    357,325    916,932    1,601,217 
                     
General and administrative expense   254,108    286,978    817,548    884,510 
                     
Research and development expense   87,246    136,900    241,739    325,764 
                     
Marketing and sales expense   95,010    104,363    308,852    340,639 
                     
(Loss) income from operations   (65,901)   (170,916)   (451,207)   50,304 
                     
Interest   11,511    13,561    34,352    44,140 
                     
(Loss) income before provision for income taxes   (77,412)   (184,477)   (485,559)   6,164 
                     
Income tax (benefit) expense   -    (1,037)   43    - 
                     
Net (loss) income   (77,412)   (183,440)   (485,602)   6,164 
                     
Dividends on preferred stock   (6,038)   (6,038)   (18,114)   (18,114)
                     
LOSS APPLICABLE TO COMMON SHARES  $(83,450)  $(189,478)  $(503,716)  $(11,950)
                     
Earnings per share - basic and diluted (Note 6)                    
Loss per common share                    
Basic  $(0.02)  $(0.05)  $(0.12)  $(0.00)
Diluted  $(0.02)  $(0.05)  $(0.12)  $(0.00)
                     
Weighted average shares outstanding                    
Basic   4,061,374    3,993,925    4,042,199    3,971,168 
Diluted   4,061,374    3,993,925    4,042,199    3,971,168 

 

The accompanying notes are an integral part of these financial statements.

 

 5 

 

 

SCI ENGINEERED MATERIALS, INC.

 

STATEMENTS OF CASH FLOWS

 

NINE MONTHS ENDED SEPTEMBER 30, 2016 AND 2015

 

(UNAUDITED)

 

   2016   2015 
CASH FLOWS FROM OPERATING ACTIVITIES          
Net (loss) income  $(485,602)  $6,164 
Adjustments to reconcile net (loss) income to net cash provided by operating activities:          
Depreciation and accretion   333,325    335,316 
Amortization   7,079    1,372 
Stock based compensation   158,075    161,456 
Patent impairment   -    7,857 
Net (gain) loss on disposal of equipment   (750)   698 
Inventory reserve   6,070    (141,157)
Allowance for doubtful accounts   (11,318)   11,318 
Changes in operating assets and liabilities:          
Accounts receivable   (105,492)   110,684 
Inventories   (101,228)   668,464 
Prepaid expenses   2,098    2,077 
Other assets   801    4,728 
Accounts payable   81,383    (122,853)
Accrued expenses and customer deposits   244,122    (538,099)
Net cash provided by operating activities   128,563    508,025 
           
CASH FLOWS FROM INVESTING ACTIVITIES          
Proceeds on sale of equipment   750    - 
Purchases of property and equipment   (80,553)   (34,991)
Net cash used in investing activities   (79,803)   (34,991)
           
CASH FLOWS FROM FINANCING ACTIVITIES          
Proceeds from exercise of common stock options   4,200    - 
Principal payments on capital lease obligations and notes payable   (269,292)   (355,487)
Payment of cumulative dividends on preferred stock   -    (24,152)
Net cash used in financing activities   (265,092)   (379,639)
           
NET (DECREASE) INCREASE IN CASH   (216,332)   93,395 
           
CASH - Beginning of period   997,170    1,011,956 
           
CASH - End of period  $780,838   $1,105,351 
           
SUPPLEMENTAL DISCLOSURES OF CASH FLOW INFORMATION          
Cash paid during the period for:          
Interest  $34,805   $45,443 
Income taxes   43    - 
           
SUPPLEMENTAL DISCLOSURES OF NONCASH FINANCING ACTIVITIES          
Property and equipment purchased by capital lease   145,077    - 
Provisional patent acquired by common stock exchange   -    30,540 
Increase in asset retirement obligation   -    5,100 

 

The accompanying notes are an integral part of these financial statements.

 

 6 

 

   

SCI ENGINEERED MATERIALS, INC

NOTES TO FINANCIAL STATEMENTS

 

Note 1.   Business Organization and Purpose

 

SCI Engineered Materials, Inc. (“SCI”, or the “Company”), formerly Superconductive Components, Inc., an Ohio corporation, was incorporated in 1987.  The Company operates in one segment as a global supplier and manufacturer of advanced materials for Physical Vapor Deposition (“PVD”) Thin Film Applications.  The Company is focused on specific markets within the PVD industry (Photonics, Thin Film Solar, Glass, Thin Film Battery and Transparent Electronics).  Substantially all of the Company’s revenues were generated from customers with multi-national operations.  Through collaboration with end users and Original Equipment Manufacturers the Company develops innovative customized solutions enabling commercial success.

 

Note 2.   Summary of Significant Accounting Policies

 

The accompanying unaudited financial statements have been prepared in accordance with U.S. generally accepted accounting principles for interim financial information and with instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments considered necessary for fair presentation of the results of operations for the periods presented have been included. The financial statements should be read in conjunction with the audited financial statements and the notes thereto for the year ended December 31, 2015. Interim results are not necessarily indicative of results for the full year.

 

The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

 

Note 3.   Common Stock and Stock Options

 

Stock Based Compensation - Compensation cost for all stock awards is based on the grant date fair value and recognized over the required service (vesting) period. Non cash stock based compensation expense was $52,972 and $56,332 for the three months ended September 30, 2016 and 2015, respectively. Non cash stock based compensation expense was $158,075 and $161,456 for the nine months ended September 30, 2016 and 2015, respectively. Unrecognized compensation expense was $229,287 as of September 30, 2016 and will be recognized through 2019. There was no tax benefit recorded for this compensation cost as the expense primarily relates to incentive stock options that do not qualify for a tax deduction until, and only if, a qualifying disposition occurs.

 

The non-employee board members received compensation of 47,536 and 35,920 aggregate shares of common stock of the Company during the nine months ended September 30, 2016 and 2015, respectively. The stock had an aggregate value of $36,957 and $40,338 for the nine months ended September 30, 2016 and 2015, respectively, and was recorded as non-cash stock compensation expense in the financial statements.

 

During 2016, proceeds of $4,200 were received from the exercise of 5,000 stock options.

 

 7 

 

 

SCI ENGINEERED MATERIALS, INC

NOTES TO FINANCIAL STATEMENTS

 

Note 3.   Common Stock and Stock Options (continued)

 

The cumulative status of options granted and outstanding at September 30, 2016, and December 31, 2015, as well as options which became exercisable in connection with the Company’s stock option plans is summarized as follows:

 

Employee Stock Options

 

       Weighted 
       Average 
   Stock Options   Exercise Price 
Outstanding at January 1, 2015   603,857   $4.18 
Expired   (30,000)   2.40 
Forfeited   (1,000)   3.10 
Outstanding at December 31, 2015   572,857   $4.27 
Exercised   (5,000)   0.84 
Expired   (31,000)   3.25 
Outstanding at September 30, 2016   536,857   $4.36 
Options exercisable at December 31, 2015   325,621   $5.15 
Options exercisable at September 30, 2016   326,071   $5.49 

 

Non-Employee Director Stock Options

 

       Weighted 
       Average 
   Stock Options   Exercise Price 
Outstanding at January 1, 2015   100,000   $3.20 
Expired   (100,000)   3.20 
Outstanding at December 31, 2015   -   $- 
Outstanding at September 30, 2016   -   $- 

 

Exercise prices for options ranged from $0.84 to $6.00 at September 30, 2016. The weighted average option price for all options outstanding was $4.36 with a weighted average remaining contractual life of 4.1 years.

 

Note 4.   Preferred Stock

 

Dividends on the Series B preferred stock accrue at 10% annually on the outstanding shares. Dividends on the Series B preferred stock were $6,038 for the three months ended September 30, 2016 and 2015 and $18,114 for the nine months ended September 30, 2016 and 2015. The Company had accrued dividends on Series B preferred stock of $235,482 at September 30, 2016, and $217,368 at December 31, 2015. These amounts are included in Convertible preferred stock, Series B on the balance sheet at September 30, 2016 and December 31, 2015.

 

 8 

 

 

SCI ENGINEERED MATERIALS, INC

NOTES TO FINANCIAL STATEMENTS

 

Note 5.   Inventories

 

Inventories consisted of the following:  September 30,   December 31, 
   2016   2015 
   (unaudited)     
Raw materials  $154,419   $202,617 
Work-in-process   471,368    366,114 
Finished goods   103,825    59,653 
Inventory reserve   (61,340)   (55,270)
   $668,272   $573,114 

 

The increase in finished goods was due to a customer’s request to delay shipment of an order that was scheduled to ship during September 2016.

 

Note 6.   Earnings Per Share

 

Basic income per share is calculated as income applicable to common shareholders divided by the weighted average of common shares outstanding. Diluted earnings per share is calculated as diluted income applicable to common shareholders divided by the diluted weighted average number of common shares. Diluted weighted average number of common shares gives effect to all dilutive potential common shares outstanding during the period using the treasury stock method and convertible preferred stock using the if-converted method. Diluted earnings per share exclude all diluted potential shares if their effect is anti-dilutive. For the three and nine months ended September 30, 2016 and 2015, all convertible preferred stock and common stock options listed in Note 3 that were out-of-the-money or anti-dilutive were excluded from diluted earnings per share. The following is provided to reconcile the earnings per share calculations:

 

   Three months ended Sept. 30,   Nine months ended Sept. 30, 
   2016   2015   2016   2015 
                 
Loss applicable to common shares  $(83,450)  $(189,478)  $(503,716)  $(11,950)
                     
Weighted average common shares outstanding - basic   4,061,374    3,993,925    4,042,199    3,971,168 
                     
Effect of dilution   -    -    -    - 
Weighted average  shares outstanding - diluted   4,061,374    3,993,925    4,042,199    3,971,168 

 

 9 

 

 

SCI ENGINEERED MATERIALS, INC

NOTES TO FINANCIAL STATEMENTS

 

Note 7.   Notes Payable

 

On August 8, 2013, the Company issued a Promissory Note (the “Note”) in the amount of $128,257 to The Huntington National Bank, as Lender, with a maturity date of August 5, 2016. This Note replaced an existing promissory note to The Huntington National Bank.

 

The Note was collateralized by a blanket lien on all of the Company’s assets including, without limitation, inventory, equipment and accounts receivable. Among other items, the Note provided for the following:

 

-Interest subject to change from time to time based on changes in LIBOR. The interest rate applied to the unpaid principal balance was at a rate of 4 percentage points over LIBOR. Under no circumstance was the interest rate to be less than 5% per annum or more than the maximum rate allowed by applicable law.

 

-Monthly payments of approximately $3,800, including interest, began September 2013.

 

The interest rate on the Note was 5% at December 31, 2015. The remaining outstanding balance of $19,047 was paid during April 2016.

 

During 2010, the Company applied and was approved for a 166 Direct Loan to borrow up to $744,250 with the Ohio Department of Development (ODOD), now known as the Ohio Development Services Agency (ODSA). This loan was finalized in February 2011. The term of the loan is 84 months at a fixed interest rate of 3%. There is also a 0.25% annual servicing fee charged monthly on the outstanding principal balance. On August 13, 2013, ODSA and the Company agreed to a modification to the payment schedule. Interest and servicing payments of $1,656 were paid monthly from August 2013 through January 2014. Currently, monthly payments of approximately $10,400, including principal, interest and servicing fee are due through October 2018. A final payment of approximately $71,900 is due November 2018. The loan is collateralized by the related project equipment. As of September 30, 2016 there was an outstanding balance of $317,969 on this loan. Debt issuance costs of $5,110 are netted against this amount for presentation in the financial statements. This loan is also subject to certain covenants, including job creation and retention. On July 21, 2014, the Company and ODSA signed a second amendment relating to the job creation and retention. The Company expects to maintain compliance with all covenants of this loan through at least September 30, 2017.

 

During 2010, the Company also applied and was approved for a 166 Direct Loan through the Advanced Energy Program with the Ohio Air Quality Development Authority (OAQDA) to borrow up to approximately $1.4 million (this maximum commitment by the OAQDA was subsequently reduced to $368,906 on March 20, 2012). On December 20, 2013, OAQDA and the Company signed a Fourth Amendment to the Loan Documents and agreed to a modification to the payment schedule. Interest and servicing payments of $2,121 were payable quarterly from October 2013 through March 2014. Beginning in June 2014, quarterly payments of approximately $17,300, including principal, interest at 3% and servicing fees are due through December 2017. A final payment of approximately $50,400 is due February 2018. This loan is also subject to certain covenants, including job creation. Included in the above amendment is a waiver for the job creation commitment, due to market conditions, for the duration of the term of the Loan Agreement. On July 21, 2016, OAQDA and the Company signed a Fifth Amendment to the Loan Documents and agreed to the elimination of a financial covenant. The loan is collateralized by the related project equipment. As of September 30, 2016 there was an outstanding balance of $130,388 on this loan.

 

 10 

 

 

SCI ENGINEERED MATERIALS, INC

NOTES TO FINANCIAL STATEMENTS

 

Note 7.   Notes Payable (continued)

 

Debt issuance costs of $7,476 are netted against this amount for presentation in the financial statements. The Company expects to maintain compliance with all covenants of this loan through at least September 30, 2017.

 

An Intercreditor Agreement exists as part of the above mentioned loans with agencies of the State of Ohio. The OAQDA and ODSA agree to shared lien and security interest through mutual covenants. These covenants include, but are not limited to, the creation of an agreed upon number of jobs, filing of quarterly and annual reports and various financial covenants.

 

During 2015, the Company made a final payment and paid a 166 Direct Loan in full. During 2006, the Company was approved for this 166 Direct Loan from the Ohio Department of Development, now known as the ODSA, in the amount of $400,000. These funds were received in July of 2008 and were used for the purchase of production equipment and to reduce the Company’s capital lease obligations on certain equipment. The term of the loan was 84 months at a fixed interest rate of 3%. There was also a 0.25% annual servicing fee charged monthly on the outstanding principal balance. The loan was collateralized by the related project equipment. On August 8, 2013, ODSA and the Company agreed to a modification to the payment schedule. Interest and servicing payments of approximately $400 were paid monthly from August 2013 through January 2014. Beginning in February 2014, monthly payments of approximately $6,100, including principal, interest and servicing fee were paid through July 2015. A final payment of approximately $42,200 was paid in August 2015.

 

The Company was in compliance with all covenants of these loans at September 30, 2016. It is possible that the Company may not be in compliance with all covenants in future periods. If non-compliance is possible the Company will seek a waiver or amendment. In the past the lenders have granted the Company a waiver or amendment when relief was sought.

 

Note 8.   Income Taxes

 

Following is the income tax (benefit) expense for the three and nine months ended September 30:

 

   Three months ended   Nine months ended 
   September 30,   September 30, 
   2016   2015   2016   2015 
Federal - deferred  $-   $-   $-   $- 
State and local   -    (1,037)   43    - 
   $-   $(1,037)  $43   $- 

 

Deferred tax assets and liabilities result from temporary differences in the recognition of income and expense for tax and financial reporting purposes. A full valuation allowance has been recorded against the realizability of the net deferred tax assets at September 30, 2016 and December 31, 2015.  The Company has net operating loss carryforwards available for federal and state tax purposes of approximately $4,700,000 which expire in varying amounts through 2035.

 

 11 

 

 

SCI ENGINEERED MATERIALS, INC

NOTES TO FINANCIAL STATEMENTS

 

Note 9.   Liquidity

 

Management has forecasted revenues and related costs as well as investing plans and financing needs to determine liquidity to meet cash flow requirements and believes the Company will have sufficient liquidity at least through September 30, 2017.  This forecast was based on current cash levels and debt obligations, and the best estimates of revenues primarily from existing customers and gave consideration to the continued and possible increased levels of uncertainty in demand in the markets in which the Company operates.  The Company’s ability to maintain current operations is dependent upon its ability to achieve these forecasted results, which the Company believes will occur. 

 

 12 

 

 

Item 2.   Management's Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion should be read in conjunction with the Financial Statements and Notes contained herein and with those in our Form 10-K for the year ended December 31, 2015.

 

Except for the historical information contained herein, the matters discussed in this Quarterly Report on Form 10-Q include certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, which are intended to be covered by the safe harbors created thereby. Those statements include, but may not be limited to, all statements regarding our intent, belief, and expectations, such as statements concerning our future profitability and operating and growth strategy. Words such as “believe,” “anticipate,” “expect,” “will,” “may,” “should,” “intend,” “plan,” “estimate,” “predict,” “potential,” “continue,” “likely” and similar expressions are intended to identify forward-looking statements. Investors are cautioned that all forward-looking statements contained in this Quarterly Report on Form 10-Q and in other statements we make involve risks and uncertainties including, without limitation, the factors set forth under the caption “Risk Factors” included in our Annual Report on Form 10-K for the year ended December 31, 2015, and other factors detailed from time to time in our other filings with the Securities and Exchange Commission. One or more of these factors have affected, and in the future could affect our business and financial condition and could cause actual results to differ materially from plans and projections. Although we believe the assumptions underlying the forward-looking statements contained herein are reasonable, there can be no assurance that any of the forward-looking statements included in this Quarterly Report on Form 10-Q will prove to be accurate. In light of the significant uncertainties inherent in the forward-looking statements included herein, the inclusion of such information should not be regarded as a representation by us or any other person that our objectives and plans will be achieved.

 

Any forward-looking statement speaks only as of the date on which such statement is made, and we undertake no obligation to update any forward-looking statement or statements to reflect events or circumstances after the date on which such statements are made or reflect the occurrence of unanticipated events, unless necessary to prevent such statements from becoming misleading. New factors emerge from time to time and it is not possible for us to predict all factors, nor can it assess the impact of each such factor on the business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.

 

Overview

 

SCI Engineered Materials, Inc. (“SCI”, “we” or the “Company”), formerly Superconductive Components, Inc., an Ohio corporation, was incorporated in 1987.  We operate in one segment as a global supplier and manufacturer of advanced materials for Physical Vapor Deposition (“PVD”) Thin Film Applications.  We are focused on specific markets within the PVD industry (Photonics, Thin Film Solar, Glass, Thin Film Battery and Transparent Electronics).  Substantially all of our revenues are generated from customers with multi-national operations.  We have made considerable resource investment in the Thin Film Solar industry and a few customers have adopted our products.  Thin Film Battery is a developing market where manufacturers of batteries use our products to produce very small power supplies with small quantities of stored energy. Through collaboration with end users and Original Equipment Manufacturers we develop innovative customized solutions enabling commercial success.

 

 13 

 

 

Item 2.   Management's Discussion and Analysis of Financial Condition and Results of Operations (continued)

 

Executive Summary

 

For the three months ended September 30, 2016, we had total revenue of $1,664,979 compared to $1,464,734 for the same time period in 2015, an increase of 13.7%. Quarterly revenue increased primarily due to higher price and volume of a low margin commodity.

 

For the nine months ended September 30, 2016, we had total revenue of $4,246,275. This was a decrease of $2,174,952, or 33.9%, compared to the nine months ended September 30, 2015. Year-to-date revenue decreased primarily due to reductions on price and volume of the same low margin commodity compared to last year. Also, volume was lower in our thin film solar market as orders continue to be cyclical. A customer in China requested we delay shipment of nearly $200,000 of thin film solar product which was expected to ship in September. We anticipate total revenue to be lower during the fourth quarter of 2016 compared to previous quarters as volume is expected to be lower due to a major customer’s inventory adjustment. During September 2016 we terminated an order of more than $450,000 of thin film solar products. The order was received in January 2016; however, we have been unable to establish communication with the customer in recent months. This had no immediate financial impact as we had not purchased inventory and therefore had not started production on the order.

 

We are encouraged by the resumption of global growth in the thin film solar market, especially increased production of copper indium gallium selenide-based products. These represent substantial growth opportunities for us as we continue to implement our thin film solar strategy. In addition, we are pursuing several opportunities in our traditional business, including new applications which we anticipate customer orders.

 

Gross profit was $370,463 for the three months ended September 30, 2016 compared to $357,325 for the same period in 2016. Gross profit was $916,932 for the nine months ended September 30, 2016 compared to $1,601,217 for the same nine months in 2015. Gross profit as a percentage of revenue was 22.3% for the three months ended September 30, 2016 compared to 24.4% for the same period in 2015. Gross profit as a percentage of revenue was 21.6% for the nine months ended September 30, 2016 compared to 24.9% for the same period in 2015.

 

Operating expenses were $1,368,139 and $1,550,913 for the nine months ended September 30, 2016 and 2015, respectively. This was a decrease of $182,774 or 11.8%. We reclassified a portion of rent expense from operating expenses (general and administrative) to cost of goods sold to accurately reflect an amount assigned to the manufacturing area of our facility. This was retroactively reclassified beginning January 1, 2015.

 

We continue to invest in developing new products for all of our markets including transparent conductive oxide systems for the thin film solar and transparent electronics markets. We also have ongoing development efforts with our thin film battery materials and transparent electronic products. These efforts include accelerating time to market for those products and involve research and development expense.

 

 14 

 

 

Item 2.   Management's Discussion and Analysis of Financial Condition and Results of Operations (continued)

 

RESULTS OF OPERATIONS

 

Three and nine months ended September 30, 2016 (unaudited) compared to three and nine months ended September 30, 2015 (unaudited):

 

Revenue

 

For the three months ended September 30, 2016, we had total revenue of $1,664,979 compared to $1,464,734 for the same time period in 2015, an increase of 13.7%. Quarterly revenue increased primarily due to higher price and volume of a low margin commodity.

 

For the nine months ended September 30, 2016, we had total revenue of $4,264,275. This was a decrease of $2,174,952, or 33.9%, compared to the nine months ended September 30, 2015. Revenue decreased primarily due to reductions on price and volume of the same low margin commodity. The average cost of this raw material was lower by approximately 26% during the first nine months of 2016 compared to the same time period in 2015. Pricing of this material has fluctuated widely during the past several years. Also, volume was lower in our thin film solar market during the first nine months of 2016 versus the first nine months of 2015. We expect total revenue to be lower during the fourth quarter of 2016 compared to previous quarters as volume is expected to be lower due to a major customer’s inventory adjustment.

  

Revenue from product sales is recognized based on shipping terms or upon shipment to customers. Provisions for discounts and rework costs for returns are established when products are shipped based on historical experience. Customer deposits represent cash received in advance of revenue earned.

 

Gross Profit

 

Gross profit was $370,463 for the three months ended September 30, 2016 compared to $357,325 for the same three months in 2015. This was an increase of $13,138, or 3.7%. Gross profit was $916,932 for the nine months ended September 30, 2016 compared to $1,601,217 for the same nine months in 2015. This was a decrease of $684,285, or 42.7%. The decrease in gross profit was attributed to lower revenue which, as discussed above, was primarily due to reductions on price and volume of a low margin commodity. Gross profit as a percentage of revenue (gross margin) was 22.3% for the third quarter of 2016 compared to 24.4% for the third quarter of 2015. Gross margin was 21.6% for the first nine months of 2016 compared to 24.9% for the same period in 2015. As previously mentioned, we reclassified a portion of rent expense from operating expenses (general and administrative) to cost of goods sold to accurately reflect an amount assigned to the manufacturing area of our facility. This was retroactively reclassified beginning January 1, 2015.

 

General and Administrative Expense

 

General and administrative expense for the three months ended September 30, 2016 decreased to $254,108 from $286,978 for the three months ended September 30, 2015, or 11.5%. The decrease is primarily related to lower travel expense of approximately $21,000.

 

General and administrative expense for the nine months ended September 30, 2016 decreased to $817,548 from $884,510 for the nine months ended September 30, 2015, or 7.6%. The first nine months of 2016 included lower travel expense of approximately $40,000, bad debt expense of approximately $11,000 and professional fees of approximately $13,000 while compensation increased approximately $20,000 compared to the first nine months of 2015.

 

 15 

 

 

Item 2.   Management's Discussion and Analysis of Financial Condition and Results of Operations (continued)

 

Professional Fees

 

Included in general and administrative expense was $37,393 and $38,914 for professional fees for the three months ended September 30, 2016 and 2015, respectively and $141,921 and $155,291 for the nine months ended September 30, 2016 and 2015, respectively. These continued expenses are primarily related to SEC compliance costs for legal, accounting and stockholder relations fees.

 

Research and Development Expense

 

Research and development expense for the three months ended September 30, 2016 was $87,246 compared to $136,900 for the same period in 2015, a decrease of 36.3%. Research and development expense for the nine months ended September 30, 2016 was $241,739 compared to $325,764 for the same period in 2015, a decrease of 25.8%. The decrease was primarily due to sponsored research which began in 2014 and concluded early in the first quarter of 2016. We had a collaborative program with a university to evaluate our TCO materials in liquid crystal display applications. We continue to invest in developing new products for all of our markets including transparent conductive oxide systems for applications in display and thin film solar markets. We also have ongoing development efforts with our thin film battery materials and transparent electronic products. These efforts include accelerating time to market for those products and involve ongoing research and development expense.

 

Marketing and Sales Expense

 

Marketing and sales expense was $95,010 and $104,363 for the three months ended September 30, 2016 and 2015, respectively. The decrease was approximately 9.0% and primarily related to lower compensation, consulting and travel expenses.

 

Marketing and sales expense was $308,852 and $340,639 for the nine months ended September 30, 2016 and 2015, respectively. The decrease was approximately 9.3% and primarily related to lower compensation, consulting, commission and travel expenses.

 

Stock Compensation Expense

 

Included in operating expenses were non-cash stock based compensation costs of $52,489 and $55,849 for the three months ended September 30, 2016 and 2015, respectively and $156,627 and $160,007 for the nine months ended September 30, 2016 and 2015, respectively. Compensation cost for all stock-based awards is based on the grant date fair value and recognized over the required service (vesting) period. Unrecognized non-cash stock based compensation expense related to operating expense was $223,233 as of September 30, 2016 and will be recognized through 2019.

 

Interest

 

Interest was $11,511 and $13,561 for the three months ended September 30, 2016 and 2015, respectively. Interest was $34,352 and $44,140 for the nine months ended September 30, 2016 and 2015, respectively. The decrease was due to lower principal balances.

 

Loss Applicable to Common Stock

 

Loss applicable to common stock for the three months ended September 30, 2016 was $83,450 compared to $189,478 for the three months ended September 30, 2015. Loss applicable to common stock for the nine months ended September 30, 2016 was $503,716 compared to $11,950 for the nine months ended September 30, 2015. The changes were due to the variation of revenue and gross profit.

 

 16 

 

 

Item 2.   Management's Discussion and Analysis of Financial Condition and Results of Operations (continued)

 

Common Stock

 

The following schedule represents our outstanding common stock during the period of 2016 through 2024 assuming all outstanding stock options are exercised during the year of expiration. Based on outstanding shares at September 30, 2016, if each shareholder exercises his or her options, it would increase our common shares by 536,857 to 4,605,901 by December 31, 2024. Assuming all such options are exercised in the year of expiration, the effect on shares outstanding is illustrated as follows:

 

   Options
due to
expire
   Potential
shares
outstanding
   Weighted
average
exercise
price
 
2018   5,000    4,074,044   $3.10 
2019   364,500    4,438,544   $6.00 
2024   167,357    4,605,901   $0.84 

 

Liquidity and Capital Resources

 

Cash

 

As of September 30, 2016 cash on hand was $780,838. Cash on-hand was $997,170 at December 31, 2015. We believe, based on forecasted sales and expenses that cash flow from operations will be adequate to sustain operations at least through September 30, 2017.

 

Working Capital

 

At September 30, 2016 working capital was $706,011 compared to $1,010,517 at December 31, 2015, a decrease of $304,506 or 30.1%. As discussed below, cash decreased approximately $216,000. Accounts receivable increased approximately $117,000 due to shipments late in the third quarter of 2016. Inventories increased approximately $95,000, accounts payable increased approximately $81,000 and customer deposits increased approximately $327,000 due to orders received during the first nine months of 2016 and expected to ship during the fourth quarter of 2016. Current debt obligations decreased approximately $27,000.

 

Cash from Operations

 

Net cash provided by operating activities was approximately $129,000 for the nine months ended September 30, 2016 and approximately $508,000 for the nine months ended September 30, 2015. Included in expenses were non cash stock based compensation costs of approximately $158,000 and $161,000 for the nine months ended September 30, 2016 and 2015, respectively.

 

Cash from Investing Activities

 

Cash of approximately $80,000 was used in investing activities during the nine months ended September 30, 2016, compared to approximately $35,000 during the nine months ended September 30, 2015.

 

 17 

 

 

Item 2.   Management's Discussion and Analysis of Financial Condition and Results of Operations (continued)

 

Cash from Financing Activities

 

Cash of approximately $269,000 and $355,000 was used in financing activities for principal payments to third parties for capital lease obligations and notes payable during the nine months ended September 30, 2016 and 2015, respectively. During 2016, proceeds of $4,200 were received from the exercise of stock options. We paid $24,152 for cumulative dividends on preferred stock during the first nine months of 2015.

 

Debt Outstanding

 

Total debt outstanding decreased from approximately $930,000 at December 31, 2015, to approximately $813,000 at September 30, 2016, or 12.6%. Debt issuance costs of $19,665 at December 31, 2015, and $12,586 at September 30, 2016 are netted for financial statement presentation. During the second quarter of 2016 we closed on a new capital lease obligation of approximately $145,000. During the fourth quarter of 2016 we expect to close on a new capital lease obligation of approximately $104,000 upon receipt and installation of equipment.

 

Liquidity

 

We have forecasted revenues and related costs as well as investing plans and financing needs to determine liquidity to meet cash flow requirements and believe we will have sufficient liquidity at least through September 30, 2017.  This forecast was based on current cash levels and debt obligations, and the best estimates of revenues primarily from existing customers and gave consideration to the continued and possible increased levels of uncertainty in demand in the markets in which we operate.  Our ability to maintain current operations is dependent upon our ability to achieve these forecasted results, which we believe will occur. 

 

Off Balance Sheet Arrangements

 

We have no off balance sheet arrangements including special purpose entities.

 

Critical Accounting Policies

 

The preparation of financial statements and related disclosures in conformity with accounting principles generally accepted in the United States requires management to make judgments, assumptions and estimates that affect the amounts reported in the Financial Statements and accompanying notes. Note 2 to the Financial Statements in our Annual Report on Form 10-K for the year ended December 31, 2015, describes the significant accounting policies and methods used in the preparation of the Financial Statements. Estimates are used for, but not limited to, accounting for the allowance for doubtful accounts, inventory allowances, property and equipment depreciable lives, patents and licenses useful lives, revenue recognition, tax valuation allowance, stock based compensation and assessing changes in which impairment of certain long-lived assets may occur. Actual results could differ from these estimates. The following critical accounting policies are impacted significantly by judgments, assumptions and estimates used in the preparation of the Financial Statements. The allowance for doubtful accounts is based on our assessment of the collectability of specific customer accounts and the aging of the accounts receivable. If there is a deterioration of a major customer’s credit worthiness or actual defaults are higher than our historical experience, our estimates of the recoverability of amounts due us could be adversely affected. Inventory purchases and commitments are based upon future demand forecasts. If there is a sudden and significant decrease in demand for our products or there is a higher risk of inventory obsolescence because of rapidly changing technology and customer requirements, we may be required to increase our inventory allowances and our gross margin could be adversely affected. Depreciable and useful lives estimated for property and equipment, licenses and patents are based on initial expectations of the period of time these assets and intangibles will benefit us. Changes in circumstances related to a change in our business, change in technology or other factors could result in these assets becoming impaired, which could adversely affect the value of these assets.

 

 18 

 

 

Item 4.   Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

Our management, with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company’s disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this report. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can only provide reasonable assurance of achieving the desired control objectives and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Due to a segregation of duties material weakness described below, and based on this evaluation, the Company’s Chief Executive Officer and Chief Financial Officer have concluded that as of September 30, 2016, the Company’s disclosure controls and procedures were not effective, at the reasonable assurance level, in recording, processing, summarizing and reporting, on a timely basis, information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act and in ensuring that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including the Chief Executive Officer and Chief Accounting Officer, as appropriate to allow timely discussions regarding required disclosure. Until we are able to hire additional employees, we will continue to report to the Audit Committee and the Board of Directors at least monthly (and more often as necessary). We believe this will continue to mitigate this weakness. This reporting includes balance sheets, statements of operations, statements of cash flows, and other detail supporting these statements. Accordingly, we believe that the financial statements included in this report fairly present, in all material respects, our financial condition, results of operation, changes in shareholder’s equity and cash flows for all periods presented.

 

Inherent Limitations over Internal Controls

 

Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures are being made only in accordance with authorizations of management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of assets that could have a material effect on the financial statements.

 

Management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our internal controls will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of internal controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Also, any evaluation of the effectiveness of controls in future periods is subject to the risk that those internal controls may become inadequate because of changes in business conditions or that the degree of compliance with the policies or procedures may deteriorate.

 

 19 

 

 

Item 4.   Controls and procedures (continued)

 

Management previously disclosed a material weakness in internal control over financial reporting in its annual report on Form 10-K, filed on February 19, 2016, for the year ended December 31, 2015, relating to insufficient segregation of duties consistent with control objectives. Management is aware of the risks associated with the lack of segregation of duties due to the small number of employees currently working with general administrative and financial matters. Due to our size and nature, segregation of all conflicting duties may not always be possible and may not be economically feasible. However, to the extent possible, the initiation of transactions, the custody of assets and the recording of transactions shall be performed by separate individuals. In order to remediate this weakness, we will need to hire additional employees. Although we will periodically reevaluate this situation, at this point we consider that the risks associated with such lack of segregation of duties and the potential benefits of adding employees to segregate such duties are not cost justified. Until we are able to hire additional employees, we will continue to report to the Audit Committee and the Board of Directors at least monthly (and more often as necessary). We believe this will continue to mitigate this weakness. This reporting includes balance sheets, statements of operations, statements of cash flows, and other detail supporting these statements.

 

Changes in Internal Controls over Financial Reporting

 

There were no changes in our internal controls over financial reporting for the three months ended September 30, 2016, that materially affected or were reasonably likely to materially affect our disclosure controls and procedures. Additionally, there were no changes in our internal controls that could materially affect our disclosure controls and procedures subsequent to the date of their evaluation.

 

 20 

 

 

Part II. Other Information

 

Item 6.   Exhibits

 

3.1 Certificate of Second Amended and Restated Articles of Incorporation of Superconductive Components, Inc. (Incorporated by reference to Exhibit 3(a) to the Company’s initial Form 10-SB, filed on September 28, 2000)
   
3.2 Restated Code of Regulations of Superconductive Components, Inc. (Incorporated by reference to Exhibit 3(b) to the Company’s initial Form 10-SB, filed on September 28, 2000)
   
3.3 Amendment to Articles of Incorporation recording the change of the corporate name to SCI Engineered Materials, Inc.  (Incorporated by reference to Exhibit 3.1 to the Company’s Quarterly Report on Form 10-QSB filed November 7, 2007).
   
4.1 SCI Engineered Materials, Inc. 2011 Stock Incentive Plan (Incorporated by reference to the Company’s Definitive Proxy Statement for the 2011 Annual Meeting of Shareholders held on June 10, 2011, filed April 28, 2011).
   
4.2 Superconductive Components, Inc. 2006 Stock Incentive Plan (Incorporated by reference to Appendix A to the Company’s Definitive Proxy Statement for the 2006 Annual Meeting of Shareholders held on June 9, 2006, filed May 1, 2006).
   
4.3 Description of the Material Terms of the Stock Option Grant and Cash Bonus Plan for Executive Officers (Incorporated by reference to the Company’s Current Report on Form 8-K, dated June 19, 2006, filed June 23, 2006)
   
4.4 Form of Incentive Stock Option Agreement under the Superconductive Components, Inc. 2006 Stock Incentive Plan (Incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K dated June 19, 2006, filed June 23, 2006).
   
4.5 Form of Non-Statutory Stock Option Agreement under the Superconductive Components, Inc. 2006 Stock Incentive Plan (Incorporated by reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K dated June 19, 2006, filed June 23, 2006).
   
4.6 Description of the Material Terms of the Stock Option Grant for Executive Officers and Board of Directors (Incorporated by reference to the Company’s Current Report on Form 8-K dated January 2, 2009, filed January 6, 2009).
   
4.7 Fourth Amended and Restated 1995 Stock Option Plan (Incorporated by reference to Exhibit 4(a) to the Company’s Registration Statement on Form S-8 (Registration No. 333-97583), filed on August 2, 2002)
   
4.8 Form of Non-Statutory Stock Option Agreement Under the Superconductive Components, Inc. Fourth Amended and Restated 1995 Stock Option Plan (Incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K, filed on December 22, 2005)

 

 21 

 

 

Item 6.   Exhibits (continued)

 

10.1 Description of amendment to the Loan Agreement between the Company and The Ohio Air Quality Development Authority (Incorporated by reference to the Company’s Current Report on Form 8-K, filed March 26, 2012).
   
10.2 Description of amendment to the Loan Agreement between the Company and the Ohio Department of Development (Incorporated by reference to the Company’s Current Report on Form 8-K, filed April 9, 2012).
   
10.3 Description of amendment to the Loan Agreement between the Company and The Ohio Air Quality Development Authority (Incorporated by reference to the Company’s Current Report on Form 8-K, filed July 10, 2012).
   
10.4 Description of amendment to the Loan Agreement between the Company and The Ohio Air Quality Development Authority (Incorporated by reference to the Company’s Current Report on Form 8-K, filed October 19, 2012).
   
10.5 Description of amendment to the Loan Agreement between the Company and the Ohio Development Services Agency, formerly known as the Ohio Department of Development (Incorporated by reference to the Company’s Current Report on Form 8-K, dated March 19, 2013).
   
10.6 Description of modification to payment schedules between the Company and the Ohio Development Services Agency, formerly known as the Ohio Department of Development and Description of Business Loan Agreement between the Company and The Huntington National Bank dated as of October 8, 2013 (Incorporated by reference to the Company’s Current Report on Form 8-K, dated August 12, 2013).
   
10.7 Description of amendment to Loan Documents between the Company and the Ohio Air Quality Development Authority dated as of December 20, 2013 (Incorporated by reference to the Company’s Current Report on Form 8-K, dated December 26, 2013).
   
10.8 Description of amendment to the Loan Agreement between the Company and the Ohio Development Services Agency, formerly known as the Ohio Department of Development (Incorporated by reference to the Company’s Current Report on Form 8-K, dated July 24, 2014).
   
10.9 Description of amendment to Loan Documents between the Company and the Ohio Air Quality Development Authority dated as of July 21, 2016 (Incorporated by reference to the Company’s Current Report on Form 8-K, dated July 22, 2016).
   
31.1 Rule 13a-14(a) Certification of Principal Executive Officer.*
   
31.2 Rule 13a-14(a) Certification of Principal Financial Officer.*
   
32.1 Section 1350 Certification of Principal Executive Officer and Certification of Principal Financial Officer and Principal Accounting Officer.*
   
99.1 Press Release dated October 27, 2016, entitled “SCI Engineered Materials, Inc. Reports Third Quarter and Nine Month 2016 Results.”
   
101 The Company’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2016, formatted in XBRL (eXtensible Business Reporting Language): (i) Consolidated Balance Sheets at September 30, 2016 and December 31, 2015, (ii) Consolidated Statements of Operations for the three and nine months ended September 30, 2016 and 2015, (iii) Consolidated Statements of Cash Flows for the nine months ended September 30, 2016 and 2015, (iv) Notes to Financial Statements.*
   
  * Filed with this report

 

 22 

 

 

Signatures

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

  SCI ENGINEERED MATERIALS, INC.
   
Date:  October 27, 2016 /s/ Daniel Rooney
  Daniel Rooney, Chairman of the Board of Directors, President and Chief Executive Officer
  (Principal Executive Officer)
   
  /s/ Gerald S. Blaskie
  Gerald S. Blaskie, Vice President and Chief Financial Officer
  (Principal Financial Officer and Principal Accounting Officer)

 

 23