Attached files

file filename
EX-32.2 - CFO CERTIFICATION - Mistras Group, Inc.mg-201653110kexhibit322.htm
EX-32.1 - CEO CERTIFICATION - Mistras Group, Inc.mg-201653110kexhibit321.htm
EX-31.2 - CFO CERTIFICATION - Mistras Group, Inc.mg-201653110kexhibit312.htm
EX-31.1 - CEO CERTIFICATION - Mistras Group, Inc.mg-201653110kexhibit311.htm
EX-23.1 - AUDITORS CONSENT - Mistras Group, Inc.copyofconsentexhibit231.htm
EX-21.1 - LIST OF SUBSIDIARIES - Mistras Group, Inc.copyofsubsidiarylistingsch.htm
 
 
 
 
 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
 
 
Form 10-K
 
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934
 
For the fiscal year ended May 31, 2016
 
Commission File Number 001-34481
 
 
 
Mistras Group, Inc.
(Exact name of registrant as specified in its charter)
 
Delaware
 
22-3341267
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification Number)
 
195 Clarksville Road
Princeton Junction, New Jersey 08550
(609) 716-4000
(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)
 
 
Securities registered pursuant to Section 12(b) of the Act:
 
Title of each class
 
Name of each exchange on which registered
Common Stock, par value $.01 par value
 
New York Stock Exchange
 
Securities registered pursuant to Section 12(g) of the Act: None
 
  
Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act of 1933.  Yes o  No ý
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act of 1934 (the “Exchange Act”).  Yes o  No ý
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ý  No o
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes ý  No o
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
 
Large accelerated filer o
 
Accelerated filer x
 
 
 
Non-accelerated filer o
 
Smaller reporting company o
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o  No ý
 
The aggregate market value of the voting and non-voting common stock held by non-affiliates of the Registrant as of November 30, 2015, based upon the closing price of the common stock as reported by New York Stock Exchange on such date was approximately $364.4 million.
 
As of August 5, 2016, a total of 28,955,455 shares of the Registrant’s common stock were outstanding.
 
DOCUMENTS INCORPORATED BY REFERENCE
 
Information required by Part III (Items 10, 11, 12, 13 and 14) is incorporated by reference to portions of the registrant’s definitive Proxy Statement for its 2016 Annual Meeting of Shareholders (the “Proxy Statement”), which is expected to be filed not later than 120 days after the registrant’s fiscal year ended May 31, 2016. Except as expressly incorporated by reference, the Proxy Statement shall not be deemed to be a part of this report on Form 10-K.
 
 
 
 
 



MISTRAS GROUP, INC.
ANNUAL REPORT ON FORM 10-K
TABLE OF CONTENTS
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


2



ITEM 1.                                                BUSINESS
 
FORWARD-LOOKING STATEMENTS
 
This Report on Form 10-K contains forward-looking statements regarding us and our business, financial condition, results of operations and prospects within the meaning of Section 27A of the Securities Act of 1933 (Securities Act), and Section 21E of the Securities Exchange Act of 1934 (Exchange Act). Such forward-looking statements include those that express plans, anticipation, intent, contingency, goals, targets or future development and/or otherwise are not statements of historical fact. These forward-looking statements are based on our current expectations and projections about future events and they are subject to risks and uncertainties known and unknown that could cause actual results and developments to differ materially from those expressed or implied in such statements.
 
In some cases, you can identify forward-looking statements by terminology, such as “goals,” “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “may,” “could,” “should,” “would,” “predicts,” “appears,” “projects,” or the negative of such terms or other similar expressions. Factors that could cause or contribute to differences in results and outcomes from those in our forward-looking statements include, without limitation, those discussed elsewhere in this Report in Part I, Item 1A. “Risk Factors,” Part 2, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and in this Item 1, as well as those discussed in our other Securities and Exchange Commission (SEC) filings.  We undertake no obligation to (and expressly disclaim any obligation to) revise or update any forward-looking statements made herein whether as a result of new information, future events or otherwise. However, you should consult any further disclosures we may make on these or related topics in our reports on Form 8-K or Form 10-Q filed with the SEC.
 
The following discussions should be read in conjunction with the sections of this Report entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Risk Factors”.
 
Our Business
 
We offer our customers “one source for asset protection solutions”® and are a leading global provider of technology-enabled asset protection solutions used to evaluate the structural integrity and reliability of critical energy, industrial and public infrastructure. We combine industry-leading products and technologies, expertise in mechanical integrity (MI), Non-Destructive Testing (NDT), Destructive Testing (DT) and predictive maintenance (PdM) services, process and fixed asset engineering and consulting services,  proprietary data analysis and our world class enterprise inspection database management and analysis software, PCMS, to deliver a comprehensive portfolio of customized solutions, ranging from routine inspections to complex, plant-wide asset integrity management and assessments. These mission critical solutions enhance our customers’ ability to comply with governmental safety and environmental regulations, extend the useful life of their assets, increase productivity, minimize repair costs, manage risk and avoid catastrophic disasters. Given the role our solutions play in ensuring the safe and efficient operation of infrastructure, we have historically provided a majority of our services to our customers on a regular, recurring basis. We serve a global customer base of companies with asset-intensive infrastructure, including companies in the oil and gas (downstream, midstream, upstream and petrochemical), power generation (natural gas, fossil, nuclear, alternative, renewable, and transmission and distribution), public infrastructure, chemicals, commercial aerospace and defense, transportation, primary metals and metalworking and research and engineering institutions. As of May 31, 2016, we had approximately 5,700 employees, in approximately 120 offices across 14 countries. We have established long-term relationships as a critical solutions provider to many of the leading companies in our target markets.
 
Our asset protection solutions combine the disciplines of NDT, DT, PdM, MI, engineering & consulting services and data analysis and enterprise inspection data management software to provide value to our customers. The foundation of our business is NDT, which is the examination of assets without impacting current and future usefulness or impairing the integrity of these assets. The ability to inspect infrastructure assets and not interfere with their operating performance makes NDT a highly attractive alternative to many traditional intrusive inspection techniques, which may require dismantling equipment or shutting down a plant, mill or site. Our MI services are a systematic engineering-based approach to developing best practices for ensuring the on-going integrity and safety of equipment and industrial facilities. MI services involve conducting an inventory of infrastructure assets, developing and implementing inspection and maintenance procedures, training personnel in executing these procedures and managing inspections, testing and assessments of customer assets. By assisting customers in implementing MI programs, we enable them to identify gaps between existing and desired practices, find and track deficiencies and degradations to be corrected and establish quality assurance standards for fabrication, engineering and installation of infrastructure assets. We believe our MI services improve plant safety and reliability and regulatory compliance, and in so doing reduce maintenance costs. Our solutions also incorporate comprehensive Risk Based Inspection (RBI) data analysis from our proprietary asset protection software to provide customers with detailed, integrated and cost-effective solutions that rate the

3


risks of alternative maintenance approaches and recommend actions in accordance with consensus industry codes and standards and help to establish and support key performance indicators (KPI’s) to ensure continued safe and economic operations.
 
We differentiate ourselves by delivering these solutions under our “One Source” umbrella, utilizing a proven systematic method that creates a closed loop life cycle for addressing continuous asset protection and improvement. Under this business model, customers outsource their inspection to us on a “run and maintain” basis. As a global asset protection leader, we provide a comprehensive range of solutions that includes:
 
traditional and advanced outsourced NDT services conducted by our technicians, mechanical integrity assessments, above-ground storage tank inspection, pipeline inspection and American Petroleum Institute (API) visual inspections and PdM program development;

destructive testing (DT), a definitive discipline in material testing, taking specimens through to mechanical failure while examining a host of factors. Hardness, stiffness and strength are a few key indicators drawn from destructive tests per customer specifications. DT is a strength of our subsidiary, Mistras-GMA in Germany, which specializes in an array of destructive testing applications utilized throughout the materials selection and approval process in the aerospace, automotive, chemical, oil and gas and power generation industries.

advanced asset protection solutions, in most cases involving proprietary acoustic emission (AE), digital radiography, infrared, wireless and/or automated ultrasonic inspections and sensors, which are operated by our highly trained technicians;

a proprietary and customized portfolio of software products for testing and analyzing data captured in real-time by our technicians and sensors, including advanced features such as pattern recognition and neural networks;

enterprise software and relational databases to store and analyze inspection data, comparing it to prior operations and testing of similar assets, industrial standards and specific risk conditions, such as use with highly flammable or corrosive materials, and developing asset integrity management plans based on risk-based inspection that specify an optimal schedule for the testing, maintenance and retirement of assets;

on-line monitoring systems that provide secure web-based remote or on-site asset inspection, real-time reports and analysis of plant or enterprise-wide structural integrity data, comparison of integrity data to our library of historical inspection data and analysis to better assess structural integrity and provide alerts for and prioritize future inspections and maintenance;

in-house testing services: Mistras’ in-house inspection services provide cost-effective, efficient solutions that improve the integrity and lifespan of critical assets featuring a dynamic suite of testing and inspection services. With a network of in-house laboratories, Mistras provides a one-stop shop for traditional (NDT), advanced non-destructive testing (ANDT), and destructive testing (DT) of materials and fabricated structures by offering a complete inspection package — from preparation and production all the way to post-processing. These capabilities are available through our state-of-the-art testing equipment and expertise in our grid of in-house testing laboratories across the U.S.A., Canada and Europe;

full range of engineering consulting services to the downstream and renewable energy sectors that includes plant operations support covering both process and equipment technologies; project planning, management and execution; expert testimony and technical training; and

ultra-high pressure water blasting in place of sand blasting, used for both off shore oil & gas platforms and land based refinery and chemical fixed equipment. NDT inspection services are offered while in post cleaning mode.
 
Our labs hold a wide variety of certifications that allow them to perform inspections to meet or exceed stringent regulatory requirements, such as: NADCAP, AS9100/ISO-9001, FAA Repair Station and ITAR/EAR. With these certifications comes a comprehensive range of approvals from prime contractors of major projects, the military, and internationally renowned products and systems manufactures from aerospace to nuclear energy; transportation to petrochemical industries.
 
We offer our customers a customized package of services, products and systems, or our enterprise software and other niche high-value products on a stand-alone basis. For example, customers can purchase most of our sensors and accompanying software to integrate with their own systems, or they can purchase a complete turn-key solution, including installation, monitoring and assessment services. Importantly, we do not sell certain of our advanced and proprietary software and other

4


products as stand-alone offerings; instead, we embed them in our comprehensive service offerings to protect our investment in intellectual property while providing an added value which generates a substantial source of recurring revenues.
 
We generated revenues of $719.2 million, $711.3 million and $623.5 million, net income of $24.7 million, $16.1 million and $22.5 million and adjusted EBITDA of $88.1 million, $71.9 million and $70.7 million for fiscal 2016, 2015 and 2014, respectively. An explanation of adjusted EBITDA and a reconciliation of these amounts to net income are set forth in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations”. For fiscal 2016, we generated approximately 77% of our revenues from our Services segment. Our revenues are diversified, with our top ten customers accounting for approximately 36%, 33% and 38% of our revenues during fiscal 2016, 2015 and 2014, respectively.
 
Asset Protection Industry Overview
 
The asset protection industry consists of NDT inspection, DT inspection, PdM and MI services and inspection data management and analysis. NDT plays a crucial role in assuring the operational and structural integrity and reliability of critical infrastructure without compromising the usefulness of the tested materials or equipment. The evolution of NDT services, in combination with broader industry trends, including increased asset utilization and aging of infrastructure, the desire by companies to extend the useful life of their existing infrastructure, new construction projects, enhanced government regulation and the shortage of certified NDT professionals, have made NDT an integral and increasingly outsourced part of many asset-intensive industries. Well-publicized industrial and public infrastructure failures and accidents such as the Deepwater Horizon oil spill in the Gulf of Mexico and the I-35W Mississippi River bridge collapse in Minnesota, and a number of recent refinery accidents continues to raise the level of safety and environmental awareness of regulators, while owners and operators are recognizing the benefits that asset protection solutions can provide.
 
Historically, NDT solutions predominantly used qualitative testing methods aimed primarily at detecting defects in the tested materials. This methodology, which we categorize as “traditional NDT,” is typically labor intensive and, as a result, considerably dependent upon the availability and skill level of the certified technicians, engineers and scientists performing the inspection services. The traditional NDT market has been highly fragmented, with a significant number of small vendors providing inspection services to divisions of companies or local governments situated in close proximity to the vendor’s field inspection engineers and technicians. The trend over the past several years, however, is for customers to look for a select few vendors capable of providing a wider spectrum of asset protection solutions for global infrastructure that we call “one source”. This shift in underlying demand, which began in the early 1990s and has accelerated more recently, has contributed to a transition from traditional NDT solutions to more advanced solutions that employ automated digital sensor technologies and accompanying enterprise software, allowing for the effective capture, storage, analysis and reporting of inspection and engineering results electronically and in digital formats. These advanced techniques, taken together with advances in wired and wireless communication and information technologies, have further enabled the development of remote monitoring systems, asset-management and predictive maintenance capabilities and other data analytics and management. We believe that as advanced asset protection solutions continue to gain acceptance among asset-intensive organizations, those vendors offering broad, complete and integrated solutions, scalable operations and a global footprint will have a distinct competitive advantage. Moreover, we believe that vendors that are able to effectively deliver both advanced solutions and data analytics, by virtue of their access to customers’ data, create a significant barrier to entry for competitors, and lead the opportunity to create significant recurring revenues.
 
We believe the following represent key dynamics of the asset protection industry:
 
Extending the Useful Life of Aging Infrastructure. The prohibitive cost and challenge of building new infrastructure has resulted in the significant aging of existing infrastructure and caused companies to seek ways to extend the useful life of existing assets. For example, due to the significant cost associated with constructing new refineries, stringent environmental regulations which have increased the costs of managing them and difficulty in finding suitable locations on which to build them, no major new refineries have been constructed in the United States since 1976. Another example is in the area of power transmission and distribution. The Smart Grid initiative in the United States is causing increased loading on aging transformers that are more than 40 years old in many cases. The need to test and monitor these units to ensure their reliability until replacement is instrumental in support of a reliable Smart Grid network. Because aging infrastructure requires relatively higher levels of maintenance and repair in comparison to new infrastructure, as well as more frequent, extensive and ongoing testing, companies and public authorities will continue spending on asset protection solutions to ensure the operational and structural integrity of existing infrastructure.

Outsourcing of Non-Core Activities and Technical Resource Constraints. The increasing sophistication and automation of NDT programs, together with a decreasing supply of skilled professionals and stricter and increasing governmental

5


regulations, has caused many companies and public authorities to outsource NDT and other services rather than recruit and train such capabilities internally. Owners and operators of infrastructure are increasingly contracting with third party providers that have the necessary technical product portfolio, engineering expertise, technical workforce and proven track record of results-oriented performance to effectively meet their increasing requirements.

Increasing Asset and Capacity Utilization. Due to the high repair and replacement costs and the limited construction of new infrastructure, existing infrastructure in some of our target markets will experience high usage, causing increased stress and fatigue that accelerate deterioration. These dynamic prices and costs also motivate our customers to complete repairs, maintenance, replacements and upgrades more quickly. For example, increasing demand for refined petroleum products, combined with high plant utilization rates, is driving refineries to upgrade facilities to make them more efficient and expand capacity. In order to sustain high capacity utilization rates, customers are increasingly using asset protection solutions to efficiently ensure the integrity and safety of their assets. Implementation of asset protection solutions can also lead to increased productivity as a result of reduced maintenance-related downtime.

Increasing Corrosion from Low-Quality Inputs. The increased availability and low cost of crude oil from areas such as shale plays and oil sands resources have led to the use of lower grade raw materials and feedstock used in refinery and power generation processes. These lower grade raw materials and feedstock, especially in the case of the refining process involving petroleum with higher sulfur content, can rapidly corrode the infrastructure with which they come into contact, which in turn increases the need for asset protection solutions to identify such corrosion and enable infrastructure owners to proactively combat the problems caused by such corrosion.

Increasing Use of Advanced Materials. Customers in our target markets are increasingly utilizing advanced materials, such as composites, and other unique technologies in the manufacturing and construction of new infrastructure and aerospace applications. As a result, they require advanced testing, assessment and maintenance technologies to inspect and to protect these assets, since many of these advanced materials cannot be tested using traditional NDT techniques. We believe that demand for NDT solutions will increase as companies and public authorities continue to use these advanced materials, not only during the operating phase of the lifecycle of their assets, but also during the design, manufacturing and quality control phases and are more frequently integrating and embedding sensors directly into the end product in support of total life cycle asset management.

Meeting Safety Regulations. Owners and operators of infrastructure assets increasingly face strict government regulations and safety requirements. Failure to meet these standards can result in significant financial liabilities, increased scrutiny by Occupational Safety and Health Administration (OSHA) and other regulators, higher insurance premiums and tarnished corporate brand value. There have been several industrial accidents, including explosions and fires, in recent years. These accidents created significant damage to the reputation of refineries and coupled with concern by owners, led OSHA to strengthen process safety enforcement standards with the continued implementation of the National Emphasis Program (NEP) that also extends to chemical plants for compliance with applicable regulations. As a result, these owners and operators are seeking highly reliable asset protection suppliers with a proven track record of providing asset protection services, products and systems to assist them in meeting these increasingly stringent regulations.

Expanding Addressable End-Markets. Advances in NDT sensor technology and asset protection software based systems, and the continued emergence of new technologies, are creating increased demand for asset protection solutions in applications where existing techniques were previously ineffective. Further, we expect increased demand in relatively new markets, such as automotive component suppliers.

Expanding Addressable Geographies. We believe that incremental demand will continue to come from international markets, including Western and Eastern Canada, Asia, Europe and parts of Latin America. Specifically, as companies and governments in these markets build and maintain infrastructure and applications that require the use of asset protection solutions, we believe demand for our solutions will increase.
 
We believe that the market available to us will continue to grow as a result of these macro-market trends.

Our Target Markets
 
Overview
 

6


Mistras operates in a highly competitive, but fragmented market. Domestically, the market is serviced by several national competitors, and many regional and/or local companies. Internationally, our primary competitors are divisions of large companies, with additional competition from small independent local companies which may be limited to a specific product, service or technology and focused on a niche market or geographic region. We focus our strategic sales, marketing and product development efforts on a range of infrastructure-intensive based industries and governmental authorities. In general, our largest markets in broad terms are energy-related infrastructure where we perform inspections, which may lead to a fitness for service evaluation and engineering based services on fixed and rotating assets.
 
There are economic indicators that continue to drive our business, especially in the U.S. domestic markets as indicated by the Energy Information Administration (EIA);

Growth in U.S. energy production- While crude oil production slowed in the first quarter of 2016 from record highs in 2015 at 9.4 million barrels per day (bbl/d) domestic production is still significantly higher than pre-2015 levels according to the EIA. Although tailing off slightly, production estimates for the year 2016 is predicted to level off around 9 million bbl/d.
High demand for U.S. Natural Gas - According to the EIA, demand for natural gas remains high resulting from the fact that the U.S. is experiencing record low pricing for natural gas in the last 18 months.
The United States is continuing its trend from being a net importer of natural gas to a net exporter by 2017. Several facilities have already begun operations in support of the export process, with more capital expenditures planned for the coming years.

The outlook for power in the U.S. has shifted substantially in the last several years due to legislation restricting emissions of greenhouse gas related to fossil fuels. There has been a shift from traditional coal and gas fired base load power plants to natural gas fueled base load and peaking units around the country. Natural gas units are preferred as natural gas pricing remains low, and the permitting process to operate these units is easier than coal or nuclear facilities.
Revenue by Target Market
 
The following chart represents the percentage of consolidated revenues we generated from our various markets for fiscal 2016:

Mistras Revenues by Target Market
(Fiscal 2016)

 
Oil and Gas

Because oil, gas, and to a much less extent, coal are expected to continue to be the primary energy sources, the energy industry will have to continue providing these fuels to meet demand. In addition, there were approximately 657 crude oil refineries in the world, with 142 refineries operating in the United States. With aging infrastructure and growing capacity constraints, asset

7


protection continues to be an indispensable tool in maintenance planning, quality control and prevention of catastrophic failure in refineries and petrochemical plants. Recent low oil and lower fossil fuel input prices have placed additional pressure on industry participants to increase capacity, focus on production efficiency and cost reductions and shorten shut-down time or “turnarounds.” Asset protection solutions are used for both off-stream inspections, or inspection when the tested infrastructure is shut-down, and increasingly, on-stream inspections, or inspection when the tested infrastructure is operating at normal levels. While we expect off-stream inspection of vessels and piping during a plant shut-down or turnaround to remain a routine practice by companies in these industries, we expect the areas of greatest future growth to occur as a result of on-stream inspections and monitoring of facilities, such as offshore platforms, transport systems and oil and gas pipeline transmission lines, because of the substantial lost revenues from shutting them down. On-stream inspection enables companies to avoid the costs associated with shutdowns during testing while enabling the economic and safety advantages of advanced planning or predictive maintenance.
 
Power Generation and Transmission
 
Asset protection in the power industry has traditionally been associated with the inspection of high-energy, critical steam piping, boilers, rotating equipment, and various other plant components (balance of plant), utility aerial man-lift devices, large transformer testing and various other applications for nuclear and fossil-fuel based power plants. We believe that in recent years the acceptance of asset protection solutions has grown rapidly in this industry due to the aging of critical power generation and transmission infrastructure. For instance, the average age of a nuclear power plant in the United States is over 30 years. Also driving this segment is the large conversion of tradition coal plants to cleaner burning and more efficient natural gas fired power plants. Furthermore, global demand for power generation and transmission has grown rapidly and is expected to continue, primarily as a result of the energy needs of emerging economies such as China and India. The areas of power generation and transmission on which we focus our efforts are natural gas, fossil, nuclear, alternative and renewable, such as wind.

Process Industries
 
The process industries, or industries in which raw materials are treated or prepared in a series of stages, include chemicals, pharmaceuticals, food processing, paper and pulp and metals and mining, have a need for our products and services. As with oil and gas processing facilities, chemical processing facilities require significant spending on maintenance and monitoring. Given their aging infrastructure and high utilization requirements, growing capacity constraints and increasing capital costs, we believe asset protection solutions will continue to grow in importance in maintenance planning, quality and cost control and prevention of catastrophic failure in the chemicals industry.
 
Public Infrastructure, Research and Engineering
 
We believe that high profile infrastructure catastrophes, such as the collapse of the I-35W Mississippi River Bridge in Minneapolis and others since, have caused public authorities to more actively seek ways to prevent similar events from occurring. Public authorities tasked with new construction and maintenance of existing, public infrastructure increasingly use asset protection solutions to inspect these assets, including the use of embedded sensors to enable on-line monitoring throughout the life of the asset. This is a target market for our application technology and experience. Over the last twenty years, we have provided testing and health monitoring on many bridges and structures worldwide, among which include some of the largest and well-known bridges in the United States and United Kingdom. In fiscal 2015, for example, we installed several wire break systems complete with multiple sensors types (known as sensor fusion). These are being monitored 24/7 automatically, alerting the bridge owner when a crack is detected. Other services are offered, including internet and cloud data transfer, secure web sites and monitoring contracts that provide for “around the clock monitoring” and regular reports, which provide information on the status of the bridge and early detection of suspect areas that can be identified and repaired before an alarm is generated. We continue to provide these monitoring services worldwide.
 

 
Aerospace and Defense
 
The operational safety, reliability, structural integrity and maintenance of aircraft and associated products is critical to the aerospace and defense industries. Industry participants increasingly use asset protection solutions to perform inspections upon delivery, and also periodically employ asset protection solutions during the operational service of aircraft, using advanced ultrasonic immersion systems or digital radiography in order to precisely detect structural defects. Industry participants also use asset protection solutions for the inspection of advanced composites found in new classes of aircraft, x-ray of critical engine components, ultrasonic fatigue testing of complete aircraft structures, corrosion detection and on-board monitoring of landing

8


gear and other critical components. We expect increased demand for our solutions including our destructive testing business from the aerospace industry to result from wider use of these advanced composites and distributed on-line sensor networks and other embedded analytical applications built into the structure of assets to enable real-time performance monitoring and condition-based maintenance. We serve this rapidly growing target market by providing our state of the art fully integrated inspection systems to original equipment manufacturers (OEMs). For the OEM that prefers to outsource this inspection, we provide a full range of in-house services through our various regional facilities. These facilities have obtained numerous accreditations and certifications required to meet the stringent inspection criteria that the aerospace industry demands.

Industrial
 
The quality control requirements driven by the need for zero to low defect component tolerance within automated robotic intensive industries such as automotive, consumer electronics and medical industries, serve as key drivers for the recent growth of NDT technologies, such as ultrasonics and radiography. We expect that increasingly stringent quality control requirements and competitive forces will drive the demand for more costly finishing and polishing which, in turn, may promote greater use of NDT throughout the production lifecycle.
 
Our Competitive Strengths
 
We believe the following competitive strengths contribute to our being a leading provider of asset protection solutions and will allow us to further capitalize on growth opportunities in our industry:
 
One Source Provider for Asset Protection Solutions® Worldwide. We believe we have the most comprehensive portfolio of proprietary and integrated asset protection solutions, including inspection and engineering services, products and systems worldwide, which positions us to be the leading single source provider for a customer’s asset protection requirements. Through our network of approximately 120 offices, supplemented by independent representatives in 14 countries around the world, we offer an extensive portfolio of solutions that enables our customers to consolidate all their inspection and maintenance requirements and the associated data storage and analytics on a single system that spans the customers’ entire enterprise.

Long-Standing Trusted Provider to a Diversified and Growing Customer Base. By providing critical and reliable NDT services, products and systems for more than 30 years and expanding our asset protection solutions, we have become a trusted partner to a large and growing customer base across numerous infrastructure-intensive industries globally. Our customers include some of the largest and most well-recognized firms in the oil and gas, chemicals, fossil and nuclear power, and aerospace and defense industries as well as some of the largest public authorities.
 
Repository of Customer-Specific Inspection Data. Our enterprise data management and analysis software, PCMS, enables us to capture, warehouse, manage and analyze our customers’ testing and inspection data in a centralized relational database. As a result, we have accumulated large amounts of proprietary process data and information that allows us to provide our customers with value-added services, such as benchmarking, risk-based inspection and reliability centered maintenance solutions including predictive maintenance, inspection scheduling, data analytics and regulatory compliance.
 
Proprietary Products, Software and Technology Packages. We have developed systems that have become the cornerstone of several high value-added unique NDT applications, such as those used for the testing of above-ground storage tanks (the TANKPAC® technology package). These proprietary products allow us to efficiently and effectively provide highly valued solutions to our customers’ complex applications, resulting in a significant competitive advantage. In addition to the proprietary products and systems that we sell to customers on a stand-alone basis, we also develop a range of proprietary sensors, instruments, systems and software used exclusively by our Services segment.
 
Deep Domain Knowledge and Extensive Industry Experience. We are an industry leader in developing advanced asset protection solutions, including acoustic emission testing for non-intrusive on-line monitoring of storage tanks and pressure vessels, bridges and transformers, portable corrosion mapping, ultrasonic testing (UT) systems, on-line plant asset integrity management with sensor fusion, enterprise software solutions for plant-wide and fleet-wide inspection data archiving and management, advanced and thick composites inspection and ultrasonic phased array inspection of thick wall boilers.
 
Collaborating with Our Customers. Our asset protection solutions have historically been designed in response to our customers’ unique performance specifications and are supported by our proprietary technologies. Important

9


technology packages, such as TANKPAC for tank floor corrosion detection and Acoustic Turbine Monitoring System (ACTMS), were developed in close cooperation and partnership with key Mistras customers. Our sales and engineering teams work closely with our customers’ research and design staff during the design phase in order to incorporate our products into specified infrastructure projects, as well as with facilities maintenance personnel to ensure that we are able to provide the asset protection solutions necessary to meet these customers’ changing demands.
 
Experienced Management Team. Our management team has a track record of leadership in NDT, DT, PdM and engineering services, averaging over 20 years of experience in the industry. These individuals also have extensive experience in growing businesses organically and in acquiring and integrating companies, which we believe is important to facilitate future growth in the fragmented asset protection industry. In addition, our senior managers are supported by highly experienced managers who are responsible for delivering our solutions to customers.
 
Our Growth Strategy
 
Our growth strategy emphasizes the following key elements:
 
Continue to Develop Technology-Enabled Asset Protection Services, Products, Software and Systems. We intend to maintain and enhance our technological leadership by continuing to invest in the internal development of new services, products, software and systems. Our highly trained team of Ph.D.’s, engineers, application software developers and certified technicians has been instrumental in developing numerous significant asset protection standards. We believe their knowledge base will continue to enable us to innovate a wide range of new asset protection solutions.
 
Increase Revenues from Our Existing Customers. Many of our customers are multinational corporations with asset protection requirements from multiple divisions at multiple locations across the globe. Currently, we believe we capture a relatively small portion of their overall expenditures on these solutions. We believe our superior services, products and systems, combined with the trend of outsourcing asset protection solutions to a small number of trusted service providers, position us to significantly expand both the number of divisions and locations that we serve as well as the types of solutions we provide. We strive to be the preferred global partner for our customers and aim to become the single source provider for their asset protection solution requirements.
 
Add New Customers in Existing Target Markets. Our current customer base represents a small fraction of the total number of companies in most of our target markets with asset protection requirements. Our scale, scope of products and services and expertise in creating technology-enabled solutions have allowed us to build a reputation for high-quality and have increased customer awareness about us and our asset protection solutions. We intend to leverage our reputation and solutions offerings to win new customers within our existing target markets, especially as asset protection solutions are adopted internationally. We intend to continue to leverage our competitive strengths to win new business as customers in our existing target markets continue to seek a single source and trusted provider of advanced asset protection solutions.
 
Expand Our Customer Base into New End Markets. We believe we have significant opportunities to expand our customer base in relatively new end markets, including nuclear, wind turbine and other alternative energy and natural gas transportation industries and the market for public infrastructure, such as highways and bridges. The expansion of our addressable markets is being driven by the increased recognition and adoption of asset protection services, products and systems, and new NDT technologies enabling further applications in industries such as healthcare and compressed and liquefied natural gas transportation, and the aging of infrastructure, such as construction and loading cranes and ports, to the point where visual inspection has proven inadequate and new asset protection solutions are required. We expect to continue to expand our global sales organization, grow our inspection data management and data mining services and find new high-value applications. As companies in these emerging end markets realize the benefits of our asset protection solutions, we expect to expand our leadership position by addressing customer needs and winning new business.
 
Continue to Capitalize on Acquisitions. We intend to continue employing a disciplined acquisition strategy to broaden, complement and enhance our product and service offerings, add new customers and certified personnel, expand our sales channels, supplement our internal development efforts and accelerate our expected growth. We believe the market for asset protection solutions is highly fragmented with a large number of potential acquisition opportunities. We have a proven ability to integrate complementary businesses, as demonstrated by the success of our past acquisitions, which have often contributed entirely new products and services that have added to our revenues and

10


profitability. In addition, we often sell our advanced asset protection solutions to customers of companies we acquired that had previously relied on traditional NDT solutions.
 
Our Segments
 
The Company has three operating segments:
 
Services. This segment provides asset protection solutions predominantly in North America with the largest concentration in the United States along with a growing Canadian services business, consisting primarily of non-destructive testing, and inspection and engineering services that are used to evaluate the structural integrity and reliability of critical energy, industrial and public infrastructure.
 
International. This segment offers services, products and systems similar to those of our Services and Products and Systems segments to global markets, in Europe, the Middle East, Africa, Asia and South America, but not to customers in China and South Korea, which are served by our Products and Systems segment.

Products and Systems. This segment designs, manufactures, sells, installs and services our asset protection products and systems, including equipment and instrumentation, predominantly in the United States.
 
For discussion of segment revenues, operating results and other financial information, including geographic areas in which we generated revenues, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7, as well as Note 19 - Segment Disclosure in the notes to consolidated financial statements in Item 8 of this Report.
 
Our Solutions
 
We offer our customers “one source for asset protection solutions”® and are a leading global provider of technology-enabled asset protection solutions used to evaluate the structural integrity and reliability of critical energy, industrial and public infrastructure. We combine industry-leading products and technologies, expertise in MI, NDT, DT and PdM services, process and fixed asset engineering and consulting services,  and our world class enterprise inspection database management and analysis software PCMS, to deliver a comprehensive portfolio of customized solutions, ranging from routine inspections to complex, plant-wide asset integrity management and assessments. We deliver our solutions through a combination of services and products and systems.
 
Our Services
 
Our Services segment provides a range of testing and inspection services to a diversified customer base across energy-related, industrial and public infrastructure industries. We either deploy our services directly at the customer’s location or through our own extensive network of field testing facilities. Our footprint allows us to provide asset protection solutions through local offices in close proximity to our customers, permitting us to keep response time, and travel, living and per diem costs to a minimum, while maximizing our ability to develop meaningful, collaborative customer relationships. Examples of our comprehensive portfolio of services include: testing components of new construction as they are built or assembled; providing corrosion monitoring data to help customers determine whether to repair or retire infrastructure; providing material analysis to ensure the integrity of infrastructure components; and supplying non-invasive on-stream techniques that enable our customers to pinpoint potential problem areas prior to failure. In addition, we also provide services to assist in the planning and scheduling of resources for repairs and maintenance activities. Our experienced inspection professionals perform these services, supported by our advanced proprietary software and hardware products. Examples of our services are discussed below.
 

11


Traditional NDT Services
 
Our certified personnel provide a range of traditional inspection services. For example, our visual inspections provide comprehensive assessments of the condition of our customers’ plant equipment during capital construction projects and maintenance shutdowns. Of the broad set of traditional NDT techniques that we provide, several lend themselves to integration with our other offerings and often serve as the initial entry point to more advanced customer engagements. For example, we provide a comprehensive program for the inspection of above-ground storage tanks designed to meet stringent industry standards for the inspection, repair, alteration and reconstruction of oil and petrochemical storage tanks. This program includes magnetic flux exclusion for the rapid detection of floor plate corrosion, advanced ultrasonic systems and leak detection of floor defects, remote ultrasonic crawlers for shell and roof inspections and trained, certified inspectors for visual inspection and documentation.
 
Advanced NDT Services
 
In addition to traditional NDT services, we provide a broad range of proprietary advanced NDT services that we offer on a stand-alone basis or in combination with software solutions such as our proprietary enterprise inspection data management and plant condition monitoring software and systems (PCMS). We also provide on-line monitoring capabilities and other solutions that enable the delivery of accurate and real-time information to our customers. Our advanced NDT services require more complex equipment and more skilled inspection professionals to operate this equipment and interpret test results. Some of the technologies and techniques we use include automated ultrasonic testing, guided ultrasonic long wave testing, phased array ultrasonic testing, risk-based inspection (RBI) and computed and digital radiography.
 
Mechanical Integrity Services
 
We provide a broad range of MI services that enable our customers to meet stringent regulatory requirements. These services increase plant safety, minimize unscheduled downtime and allow our customers to plan for, repair and replace critical components and systems before failure occurs. Our services are designed to complement a comprehensive predictive and preventative inspection and maintenance program that we can provide for our customers in addition to the MI services. Customers of our MI services have, in many instances, also licensed our PCMS software, which allows for the storage and analysis of data captured by our testing and inspection products and services, and implemented this solution to complement our inspection services.
 
As a result of the information captured by PCMS and its risk-based inspection software module, we are able to provide a professional service known as “Mechanical Integrity Gap Analysis” for process facilities. Our Mechanical Integrity Gap Analysis service offers insight into the level of plant readiness, how best to manage and monitor the integrity of process facility assets, and how to extend the useful lives of such assets. Our Mechanical Integrity Gap Analysis service also assists customers in benchmarking and managing their infrastructure through key performance indicators and other metrics.
 
Destructive Testing Services
 
We provide a wide range of destructive testing (DT) services. Hardness, stiffness and strength are a few key indicators drawn from destructive tests per customer specifications. DT is a strength of our subsidiary, Mistras-GMA in Germany, which specializes in an array of destructive testing applications utilized throughout the materials selection and approval process in the aerospace, automotive, chemical, oil and gas and power generation industries. Example testing includes:
 
Mechanical tests — Materials, specimens and even composites are subjected to increasing levels of tension, compression, shear and peeling until failure. There are a number of variations of mechanical testing in which adding temperature, strain, unidirectional load or shear can provide useful results
Physical/Chemical — Used to examine specific material and thermal characteristics as well as chemical compositions, including differential scanning calorimetry (DSC), high performance liquid chromatography, fiber volume content and fourier transformation infrared spectroscopy (FTIR)
Materialography — Gives an insight into the geometries of structural composites, which presents an inside track with regards to determining failure mechanisms and asset lifespan expectations.
 
Our Products and Systems
 
We provide a range of acoustic emission (AE) products and are a leader in the design and manufacture of AE sensors, instruments and turn-key systems used for monitoring and testing materials, pressure components, processes and structures. Though we principally sell our products as a system, which includes a combination of sensors, an amplifier, signal processing

12


electronics, knowledge-based software and decision and feedback electronics, we can also sell these as individual components to certain customers that have the in-house expertise to perform their own services. Our sensors “listen” to structures and materials to detect real-time AE activity and to determine the presence of active corrosion, crack propagation and other structural flaws in the inspected materials. Such components include pressure vessels, storage tanks, heat exchangers, piping, turbine blades and reactors.
 
In addition, we provide leak monitoring and detection systems used in diverse applications, including the detection and location of both gaseous and liquid leaks in valves, vessels, pipelines, boilers and tanks. AE leak monitoring and detection, when applied in a systematic preventive maintenance program, has proven to substantially reduce costs by eliminating the need for visual valve inspection and unscheduled down-time.

We design, manufacture and market a complete line of ultrasonic equipment. While AE technology detects flaws and pinpoints their location, our UT technology has the ability to size defects in three-dimensional geometric representations. Our line of UT systems include various Automated UT scanners, our unique portable UT handheld and tablet systems with motion control to run our many inspection scanners, and our immersion systems ranging from small bench top units to large UT systems over 55 feet long and large production unit gantry systems.
 
We provide a wide array of digital radiographic systems to solve specific industrial problems, including Computed Radiography (CR), Real-Time Radiography (RTR), Direct Radiography (DR), and Computed Tomography (CT). Digital Radiography is one of the newest forms of radiographic imaging. Thickness profiles of piping systems, both insulated and un-insulated, are performed using computed radiography, while large production runs of smaller parts are inspected using direct radiography. Real time radiography is utilized for large “real time” inspections of insulated piping systems to identify areas of pipe degradation.
 
Technology Solutions
 
In order to address some of the more common problems faced by our customers, we have developed a number of robust technology solutions. These packages generally allow more rapid and effective testing of infrastructure because they minimize the need for service professionals to customize and integrate asset protection solutions with the infrastructure and interpret test results. These packaged solutions use proprietary and specialized testing procedures and hardware, advanced pattern recognition, neural network software and databases to compare test results against our prior testing data or national and international structural integrity standards. One such package is our ACTMS (Acoustic Combustion Turbine Monitoring System), an on-line system to detect stator blade cracks in gas turbines. Others include TANKPAC for tank inspections, POWERPAC for monitoring discharges in critical power grid transformers, and the AMS boiler tube leak detection and location monitoring system.
 
Software Solutions

Our software solutions are designed to meet the demands of our customers inspection data management, risk management, data analysis and asset integrity management requirements. We address these requirements using best in class database management systems and applying enterprise based inspection and data management applications. We apply our comprehensive portfolio of customized Acoustic Emission and Ultrasonic application-specific software products to cover a broad range of materials testing and analysis methods, for neural networks, pattern recognition, wavelet analysis and moment tensor analysis. Some of the key software solutions we offer include:
 
PCMS enterprise software: A leading inspection data management system for supporting asset protection and reliability
ISOTRAC: A multiphase methodology to illustrate in 3-D each element of a plant to help develop an overall asset integrity management program that meets or exceeds compliance with current MI standards and regulations

Our PCMS application is an enterprise software system that allows for the collection, storage and analysis of data as captured by our testing and inspection products and services and convert it to valuable information for our plant personnel and plant management. PCMS allows our customers to design and develop asset integrity management monitoring plans that include:

optimal systematic testing schedules for their infrastructure based on real-time data captured by our sensors;
alerts that notify customers when to perform special testing services on suspect areas, enabling them to identify and resolve flaws on a timely basis by using our PCMS risk-based inspection (RBI) software module; and
schedules for the maintenance and retirement of assets.
 

13


PCMS also offers advantages by allowing the information it develops and stores to be organized, linked and synchronized with enterprise software systems such as SAP and IBM’s Maximo. We believe PCMS is one of the more widely used plant condition management software systems in the world and we estimate it is currently used by more than 40% of U.S. refineries, by capacity. This provides us not only with recurring maintenance and support fees, but also marketing opportunities for additional software, asset integrity management and other asset protection solutions. PCMS has also been chosen and installed by leading midstream pipeline energy companies and major energy companies in Canada and Europe.
 
We also offer other software solutions, such as our Advanced Data Analysis Pattern Recognition and Neural Networks Software (NOESIS), which enables our AE experts to develop automated remote monitoring systems for our customers, and our Loose Parts Monitoring Software (LPMS), which is a software program for monitoring, detecting and evaluating metallic loose parts in nuclear reactor coolant systems in accordance with strict industry standards.

Engineering and Consulting Services
 
In addition to software and advanced technologies, Mistras also provides professional engineering and consulting services that is organized under our Asset Integrity Management Services (AIMS) group. Asset integrity management refers to the management system that enables plant owners to maintain the integrity of its assets in a fit for service condition for the desired life of the assets, as well as optimize the assets that are part of a process unit. Our engineering and consulting support capabilities include plant operations support, turn-around planning, project planning, management and execution, facilities planning studies, engineering design, safety reviews, plant operations improvement and optimization evaluations, and technical training.

On-line Monitoring
 
Our on-line monitoring offerings combine all of our asset protection services, products and systems. We provide temporary, periodic and continuous monitoring of static infrastructures such as bridges, pipes, and transformers, as well as dynamic or rotating assets such as pumps, motors, gearboxes, steam and gas turbines. Temporary monitoring is typically used when there is a known defect or problem and the condition needs to be monitored until repaired or new equipment can be placed in service. Periodic monitoring, or “walk around” monitoring, is used as a preventative maintenance tool to take machine and device readings, on a periodic basis, to observe any change in the assets’ condition, such as increased vibration or unusual heat buildup and dissipation. Continuous monitoring is applied “24/7” on critical assets to observe the earliest onset of a defect and to track its progression to avoid catastrophic failure.

Centers of Excellence

Another differentiator in our business model is the formation of our Centers of Excellence (COEs), which we consider to be incubators of inspection technology. The COEs are focused around target applications in our key market segments. They are supported by subject matter experts that will engage in strategic sales opportunities offering customers value-added solutions using advanced technologies and methods providing oversight, management and consultation. The COEs have a blueprint for their areas that can be replicated throughout the world by delivering procedures, equipment, reports, certifications, etc. ensuring a standardized approach to implementation yielding higher margin business.

Customers
 
We provide our asset protection solutions to a global customer base of diverse companies primarily in our target markets. One customer, BP plc., accounted for approximately 10% of our total revenues for fiscal 2016. No customer accounted for more than 10% of our revenues in fiscal 2015 or 2014.

Geographic Areas
 
We conduct our business in 14 different countries. Our revenues are primarily derived from our U.S., Canadian and European operations. See Note 19 — Segment Disclosure to the consolidated financial statements in this report for further disclosure of our revenues, long-lived assets and other financial information regarding our international operations.
 
Seasonality
 
Our business is seasonal. This seasonality relates primarily to our Services segment. Our first and third fiscal quarter revenues for our Services segment are typically lower than our revenues in the second and fourth fiscal quarters because demand for our

14


asset protection solutions from the oil and gas as well as the fossil and nuclear power industries increases during their non-peak production periods. Because we are increasing our work in the second and fourth fiscal quarters, our cash flows are lower in those quarters than in our first and third quarters, as collections of receivables lag behind revenues. For instance, U.S. refineries’ non-peak periods are generally in our second fiscal quarter, when they are retooling to produce more heating oil for winter, and in our fourth fiscal quarter, when they are retooling to produce more gasoline for summer. Our quarterly Services segment revenues for fiscal 2016, as a percentage of total Services revenues for fiscal 2016, were 25% (first quarter), 27% (second quarter), 22% (third quarter), and 26% (fourth quarter). We expect that this seasonality will continue.
 
Competition
 
We operate in a highly competitive, but fragmented, market. Our primary competitors are divisions of large companies, and many of our other competitors are small companies, limited to a specific product or technology and focused on a niche market or geographic region. We believe that none of our competitors currently provides the full range of asset protection and NDT products, enterprise software (PCMS) and the traditional and advanced services solutions that we offer. Our competition with respect to NDT services include the Acuren division of Rockwood Service Corporation, SGS Group, the Team Qualspec division of Team, Inc. and APPLUS RTD. Our competition with respect to our PCMS software includes UltraPIPE, Lloyd’s Register Capstone, Inc. and Meridium Systems. Our competition with respect to our ultrasonic and radiography products are GE Inspection Technologies and Olympus NDT. In the traditional NDT market, we believe the principal competitive factors include project management, availability of qualified personnel, execution, price, reputation and quality. In the advanced NDT market, reputation, quality and size are more significant competitive factors than price. We believe that the NDT market has significant barriers to entry which would make it difficult for new competitors to enter the market. These barriers include: (1) having to acquire or develop advanced NDT services, products and systems technologies, which in our case occurred over many years of customer engagements and at significant internal research and development expense, (2) complex regulations and safety codes that require significant industry experience, (3) license requirements and evolved quality and safety programs, (4) costly and time-consuming certification processes, (5) capital requirements and (6) emphasis by large customers on size and critical mass, length of relationship and past service record.
 
Sales and Marketing
 
We sell our asset protection solutions through our experienced and highly trained direct sales and marketing teams within all of our offices worldwide. In addition, our project and laboratory managers as well as our management are trained on our solutions and often are the source of sales leads and customer contacts. Our direct sales and marketing teams work closely with our customers’ research and design personnel, reliability engineers and facilities maintenance engineers to demonstrate the benefits and capabilities of our asset protection solutions, refine our asset protection solutions based on changing market and customer needs and identify potential sales opportunities. We divide our sales and marketing efforts into services sales, products and systems sales and marketing and utilize a robust CRM system to collect, manage and collaborate customer information with our teams globally. Our CRM also provides critical data to provide accurate forecasting and reporting.
 
Manufacturing
 
Most of our hardware products are manufactured in our Princeton Junction, New Jersey facility. Our Princeton Junction facility includes the capabilities and personnel to fully produce all of our AE products, NDT Automation Ultrasonic equipment and Vibra-Metrics vibration sensing products and systems. We recently expanded our manufacturing facilities to handle the assembly and manufacturing of our larger UT systems due to growth in this segment. Certain other hardware is manufactured by a third party and then loaded by us with our proprietary software. We also design and manufacture automated ultrasonic systems and scanners in France.
 
Intellectual Property

Our success depends, in part, on our ability to maintain and protect our proprietary technology and to conduct our business without infringing on the proprietary rights of others. We utilize a combination of intellectual property safeguards, including patents, copyrights, trademarks and trade secrets, as well as employee and third-party confidentiality agreements, to protect our intellectual property.
 
As of May 31, 2016, we held 6 patents (by direct ownership or exclusive licensing), all in the United States, which will expire at various times between fiscal 2017 and 2026, and license certain other patents. However, we do not principally rely on these patents or licenses to provide our proprietary asset protection solutions. Our trademarks and service marks provide us and our products and services with a certain amount of brand recognition in our markets. We do not consider any single patent, trademark or service mark material to our financial condition or results of operations.

15


 
As of May 31, 2016, the primary trademarks and service marks that we held in the United States included Mistras® and our stylized globe design. Other trademarks or service marks that we utilize in localized markets or product advertising include PCMS®, Physical Acoustics Corporation and the PAC logo, Ropeworks®, NOESIS, Pocket AE®, Pocket UT®, AEwin®, AEwinPost, UTwin®, UTIA, LST, Vibra-Metrics®, Field CAL®, MONPAC, PERFPAC, TANKPAC® , Valve-Squeak®,VPAC, POWERPAC, Sensor Highway, QSL, NDT Automation, and One Source for Asset Projection Solutions®.
 
Many elements of our asset protection solutions involve proprietary know-how, technology or data that are not covered by patents or patent applications because they are not patentable, or patents covering them would be difficult to enforce, including technical processes, equipment designs, algorithms and procedures. We believe that this proprietary know-how, technology and data is the most important component of our intellectual property assets used in our asset protection solutions, and is a primary differentiator of our asset protection solutions from those of our competitors. We rely on various trade secret protection techniques and agreements with our customers, service providers and vendors to protect these assets. All of our employees are subject to confidentiality requirements through our employee handbook. In addition, employees in our Products and Systems segment and our other employees involved in the development of our intellectual property have entered into confidentiality and proprietary information agreements with us. Our employee handbook and these agreements require our employees not to use or disclose our confidential information, to assign to us all of the inventions, designs and technologies they develop during the course of employment with us, and otherwise address intellectual property protection issues. We also seek confidentiality agreements from our customers and business partners before we disclose any sensitive aspects of our asset protection solutions technology or business strategies. We are not currently involved in any material intellectual property claims.
 
Research and Development
 
Our research and development is principally conducted by engineers and scientists at our Princeton Junction, New Jersey headquarters, and supplemented by other employees in the United States and throughout the world, including France, Greece, and the United Kingdom, who have other primary responsibilities. Our total professional staff includes employees who hold Ph.D.’s and engineers and employees who hold Level III certification, the highest level of certification from the American Society of Non-Destructive Testing.
 
We work with customers to develop new products or applications for our technology. Research and development expenses are reflected on our consolidated statements of income as research and engineering expenses. Our company-sponsored research and engineering expenses were approximately $2.5 million, $2.5 million and $3.0 million for fiscal 2016, 2015 and 2014, respectively. While we have historically funded most of our research and development expenditures, from time to time we also receive customer-sponsored research and development funding. We also have paid research contracts in Greece, Brazil, France, the United Kingdom, and the Netherlands, for various industries and applications, including testing of new composites, detecting crack propagation and wireless and communications technologies, as well as the development of permanently embedded inspection systems using acoustic emission and acousto-ultrasonics to provide continuous on-line in-service full coverage monitoring of critical structural components. Most of the projects are in our target markets; however, a few of the projects could lead to other future market opportunities.
 
Employees
 
Providing our asset protection solutions requires a highly-skilled and technically proficient employee base. As of May 31, 2016, we had approximately 5,700 employees worldwide, of which approximately 65% were based in the United States. Less than 10% of our employees in the United States are unionized. We believe that we have good relations with our employees.
 
Environmental Matters
 
We are subject to numerous environmental, legal and regulatory requirements related to our operations worldwide. In the United States, these laws and regulations include, among others: the Comprehensive Environmental Response, Compensation, and Liability Act, the Resources Conservation and Recovery Act, the Clean Air Act, the Federal Water Pollution Control Act, the Toxic Substances Control Act, the Atomic Energy Act, the Energy Reorganization Act of 1974, and applicable regulations. In addition to the federal laws and regulations, states and other countries where we do business often have numerous environmental, legal and regulatory requirements by which we must abide. We evaluate and address the environmental impact of our operations by assessing properties in order to avoid future liabilities and comply with environmental, legal and regulatory requirements.

We received a notice in May 2015 that the U.S. Environmental Protection Agency (“EPA”) performed a preliminary assessment of a leased facility we operate in Cudahy, California. Based upon the preliminary assessment, the EPA would like to conduct an

16


investigation of the site, which would include taking groundwater and soil samples. The purpose of the investigation is to determine whether any hazardous materials were released from the facility. We have been informed that certain hazardous materials and pollutants have been found in the ground water in the general vicinity of the site and the EPA is attempting to ascertain the origination or source of these materials and pollutants. Given the historic industrial use of the site, the EPA determined that the site of our Cudahy facility should be examined along with numerous other sites in the vicinity. At this time, we are not able to determine whether we have any liability in connection with this matter and if so, the amount or range of any such liability.
 
Our Website and Available Information
 
Our website address is www.mistrasgroup.com. We file reports with the SEC, including Quarterly Reports on Form 10-Q, Annual Reports on Form 10-K, Current Reports on Form 8-K and Proxy Statements. All of the materials we file with or furnish to the SEC are available free of charge on our website at http://investors.mistrasgroup.com/sec.cfm, as soon as reasonably practicable after having been electronically submitted to the SEC. Information contained on or connected to our website is not incorporated by reference into this Annual Report on Form 10-K and should not be considered part of this report or any other filing with the SEC. All of our SEC filings are also available at the SEC’s website at www.sec.gov. In addition, materials we file with the SEC may be read and copied at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.
 
Executive Officers
 
The following are our executive officers and other key employees as of May 31, 2016 and their background and experience:
 
Name
 
Age
 
Position
Dr. Sotirios J. Vahaviolos
 
70
 
Chairman, President, Chief Executive Officer and Director
Dennis Bertolotti
 
56
 
Group Executive Vice President, Services America
Mark F. Carlos
 
64
 
Group Executive Vice President, Products and Systems
Michael C. Keefe
 
59
 
Executive Vice President, General Counsel and Secretary
Michael J. Lange
 
56
 
Vice Chairman, Group Executive Vice President, Strategic Planning and Business Development, and Director
Jonathan H. Wolk
 
55
 
Executive Vice President, Chief Financial Officer and Treasurer

Subsequent to May 31, 2016, Dennis Bertolotti became President and Chief Operating Officer, Jonathan H. Wolk became Senior Executive Vice President, Chief Financial Officer and Treasurer and Michael J. Lange became Vice Chairman, Senior Group Executive Vice President of Global Business Development, Marketing & Strategic Planning, and Director.

Dr. Sotirios J. Vahaviolos has been our Chairman, President and Chief Executive Officer since he founded Mistras in 1978 under the name Physical Acoustics Corporation. Prior to joining Mistras, Dr. Vahaviolos worked at AT&T Bell Laboratories. Dr. Vahaviolos received a B.S. in Electrical Engineering and graduated first in his engineering class from Fairleigh Dickinson University and received Masters Degrees in Electrical Engineering and Philosophy and a Ph.D. (EE) from the Columbia University School of Engineering. During Dr. Vahaviolos’ career in non-destructive testing, he has been elected Fellow of The Institute of Electrical and Electronics Engineers, a member of The American Society for Nondestructive Testing (ASNT) where he served as its President from 1992-1993 and its Chairman from 1993-1994, a member of Acoustic Emission Working Group (AEWG) and an honorary life member of the International Committee for Nondestructive Testing. Additionally, he was the recipient of ASNT’s Gold Medal in 2001 and AEWG’s Gold Medal in 2005. He was also one of the six founders of NDT Academia International in 2008 headquartered in Brescia, Italy.
 
Dennis Bertolotti joined Mistras when Conam Inspection Services was acquired in 2003, where Mr. Bertolotti was a Vice President at the time of the acquisition. Mr. Bertolotti has been in the NDT business for over 30 years, and previously held ASNT Level III certifications and various American Petroleum Institute, or API, certifications, and received his Associate of Science degree in NDT from Moraine Valley Community College in 1983. Mr. Bertolotti has also received a Bachelor of Science and MBA from Otterbein College.
 
Mark F. Carlos joined Mistras at its founding in 1978. Prior to joining Mistras, Mr. Carlos worked at AT&T Bell Laboratories. Mr. Carlos received a MBA from Rider University and a Masters in Electrical Engineering from Columbia University. Mr. Carlos is an elected Fellow of ASNT and AEWG, and currently serves as the Chairman of the American Society for Testing

17


and Materials’ NDT Standards Writing Committee E-07 and was the recipient of its prestigious Charles W. Briggs Award in 2007.
 
Michael C. Keefe joined Mistras in December 2009. Most recently before Mistras, Mr. Keefe worked at International Fight League, a publicly-traded sports promotion company, from 2007 until 2009, in various executive positions. From 1990 until 2006, Mr. Keefe served in various legal roles with Lucent Technologies and AT&T, the last four years as Vice President, Corporate and Securities Law and Assistant Secretary. Mr. Keefe received a BS in Business Administration (Accounting) from Seton Hall University and a J.D. from Seton Hall University School of Law.
 
Michael J. Lange joined Mistras when we acquired Quality Services Laboratories in November 2000, and was elected a Director in 2003. Mr. Lange is a well-recognized authority in Radiography and has held an ASNT Level III Certificate for almost 20 years. Mr. Lange received an Associate of Science degree in NDT from the Spartan School of Aeronautics in 1979.
 
Jonathan H. Wolk joined us in November 2013. Prior to joining Mistras, he served as Senior Vice President, Chief Financial Officer and Secretary of American Woodmark Corporation from 2004 until August 2013. Prior to American Woodmark, he served as the Chief Financial Officer and Treasurer of Tradecard, Inc., from 2000 to 2004, and was the global controller of GE Capital Real Estate from 1998 to 2000. Mr. Wolk started his career in public accounting at KPMG, received his B.S. in accounting from State University of New York-Albany and is a certified public accountant.
 
Our executive officers are elected by, and serve at the discretion of, our board of directors. There are no family relationships among any of our directors or executive officers.
 
ITEM 1A.                                       RISK FACTORS
 
This section describes the major risks to us, our business and our common stock. You should carefully read and consider the risks described below, together with the other information contained in this Annual Report, including our financial statements and the notes thereto and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”(MD&A) before making an investment decision. The statements contained in this section constitute cautionary statements under the Private Securities Litigation Reform Act of 1995. If any of these risks actually occur, our business, financial condition, results of operations and future growth prospects may be adversely affected. As a result, the trading price of our common stock would likely decline, and you may lose all or part of your investment. You should understand that it is not possible to predict or identify all risk factors that could impact us. Accordingly, you should not consider the following to be a complete discussion of all risks and uncertainties pertaining to us and our common stock.
 
Risks Related to Our Business
 
Our growth strategy includes acquisitions. We may not be able to identify suitable acquisition candidates or integrate acquired businesses successfully, which may adversely impact our results.  Furthermore, acquisitions that we do complete could expose us to a number of unanticipated operational and financial risks.
 
A significant factor in our growth has been and will continue to be based upon our ability to make acquisitions and successfully integrate these acquired businesses.  We intend to continue to seek additional acquisition opportunities, both to expand into new markets and to enhance our position in existing markets.  This strategy has provided us with many benefits and has helped fuel our growth, but also carries with it many risks.  Some of the risks associated with our acquisition strategy include:
 
whether we successfully identify suitable acquisition candidates, negotiate appropriate acquisition terms, and complete proposed acquisitions
 
whether we can successfully integrate acquired businesses into our current operations, including our accounting, internal control and information technology systems, marketing and other key infrastructure
 
whether we can adequately capture opportunities that an acquired business may offer, including the expansion into new markets in which we have no prior experience

whether we value an acquired business properly when determining the purchase price, terms and whether we are able to achieve the returns on the investment we expect

whether an acquired business can achieve levels of revenues, profitability, productivity or cost savings we expect


18


whether an acquired business is compatible with our culture and philosophy of doing business

unexpected loss of key personnel and customers of an acquired business;

the assumption of liabilities and risks (including environmental-related costs) of an acquired business, some of which may not be anticipated; and
 
the potential disruption of our ongoing business and distraction of management and other personnel of us and the acquired business resulting from the efforts to acquire then integrate an acquired business
 
Our ability to undertake acquisitions is limited by our financial resources, including available cash and borrowing capacity. Future acquisitions could result in potentially dilutive issuances of equity securities, the incurrence of substantial additional indebtedness and other expenses, any of which could adversely impact our financial condition and results of operations. Although management intends to: (i) evaluate the risks inherent in any particular transaction, (ii) assume only risks management believes to be acceptable, and (iii) develop plans to mitigate such risks, there are no assurances that we will properly ascertain or accurately assess the extent of all such risks.  Difficulties encountered with acquisitions may adversely impact our business, financial condition and results of operations.
 
In addition, we have a significant amount of goodwill and other intangible assets on our balance sheet as a result of our acquisitions.  This will increase as we complete more acquisitions.  If our acquisitions do not perform as planned and we do not realize the benefits and profitability we expect, we could incur significant write-downs and impairment charges to our earnings due to the impairment of the goodwill and other intangible assets we have acquired.
 
Our international operations are subject to risks relating to non-U.S. operations.
 
In fiscal 2016, 2015 and 2014 we generated approximately 28%, 31% and 35% of our revenues outside the United States, respectively. We may choose to increase our international presence over time. Our primary operations outside the United States are in Canada, Germany, the United Kingdom, France and Brazil. We also have operations in the Netherlands, India, Belgium and Switzerland. There are numerous risks inherent in doing business in international markets, including:
 
fluctuations in currency exchange rates and interest rates;

varying regional and geopolitical business and economic conditions and demands;

compliance with applicable foreign regulations and licensing requirements, and U.S. laws and regulation with respect to our business in other countries, including export controls and anti-bribery laws;

the cost and uncertainty of obtaining data and creating solutions that are relevant to particular geographic markets;

the need to provide sufficient levels of technical support in different locations;

the complexity of maintaining effective policies and procedures in locations around the world;

political instability and civil unrest;

restrictions or limitations on outsourcing contracts or services abroad;

the impact of the United Kingdom exiting the European Union;

restrictions or limitations on the repatriation of funds; and

potentially adverse tax consequences.
 
Due to our dependency on customers in the oil and gas industry, we are susceptible to prolonged negative trends relating to this industry that could adversely affect our operating results.
 
Our customers in the oil and gas industry (including the petrochemical market) have accounted for a substantial portion of our historical revenues. Specifically, they accounted for approximately 56%, 52% and 49% of our revenues for fiscal 2016, 2015 and 2014, respectively. Although we have expanded our customer base into industries other than the oil and gas industry, we

19


still receive approximately half of our revenues from this industry. While our services are vital to the operators of plants and refineries, economic slowdowns or reductions in oil prices could result in cutbacks in contracts for our services. If the oil and gas industry were to suffer a prolonged or significant downturn, our revenues, profits and cash flows may be reduced. While we continue to expand our market presence in the power generation and transmission, and the chemical processing industries, among others, these markets are also cyclical in nature and as such, are subject to economic downturns.
 
We expect to continue expanding and our success depends on how effectively we manage our growth.
 
We expect to continue experiencing growth in the number of employees and the scope of our operations. To effectively manage our anticipated future growth, we must continue to implement and improve our managerial, operational, compliance, financial and reporting systems and capabilities, expand our facilities and continue to recruit and train additional qualified personnel. We expect that all of these measures will require significant expenditures and will demand the attention of management. Failure to manage our growth effectively could lead us to over or under-invest in technology and operations, result in weaknesses in our infrastructure, systems, compliance programs or controls, give rise to operational mistakes, loss of business opportunities, the loss of employees and reduced productivity among remaining employees. Our expected growth could require significant capital expenditures and may divert financial resources from other projects, such as the development of new solutions. If our management is unable to effectively manage our expected growth, our expenses may increase more than expected, our profit margins may suffer, our revenues could decline or may grow more slowly than expected and we may be unable to implement our business strategy as anticipated.
 
Our operating results could be adversely affected by a reduction in business with our significant customers.
 
We derive a significant amount of revenues from a few customers. For instance, various divisions or business units of our largest customer were responsible for approximately 10% of our revenues for fiscal 2016. Taken as a group, our top ten customers were responsible for approximately 36%, 33% and 38% of our revenues for fiscal 2016, 2015 and 2014, respectively. This concentration pertains almost exclusively to our Services segment, which accounted for more than 70% of our revenues for each of the last three fiscal years and are primarily in the oil and gas sector. Generally, our customers do not have an obligation to make purchases from us and may stop ordering our products and services or may terminate existing orders or contracts at any time with little or no financial penalty. The loss of any of our significant customers, any substantial decline in sales to these customers or any significant change in the timing or volume of purchases by our customers could result in lower revenues and could harm our business, financial condition or results of operations.
 
An accident or incident involving our asset protection solutions could expose us to claims, harm our reputation and adversely affect our ability to compete for business and, as a result, harm our operating performance.
 
We could be exposed to liabilities arising out of the solutions we provide. For instance, we furnish the results of our testing and inspections for use by our customers in their assessment of their assets, facilities, plants and other structures. If such results were to be incorrect or incomplete, as a result of, for instance, poorly designed inspections, malfunctioning testing equipment or our employees’ failure to adequately test or properly record data, we could be subject to claims. Further, if an accident or incident involving a structure we tested occurs and causes personal injuries or property damage, such as the collapse of a bridge or an explosion in a facility, and particularly if these injuries or damages could have been prevented by our customers had we provided them with correct or complete results, we may face significant claims relating to personal injury, property damage or other losses. Even if our results are correct and complete, we may face claims for such injuries or damage simply because we tested the structure or facility in question. While we do have insurance, our insurance coverage may not be adequate to cover the damages from any such claims, forcing us to bear these uninsured damages directly, which could harm our operating results and may result in additional expenses and possible loss of revenues. An accident or incident for which we are found partially or fully responsible, even if fully insured, or even an incident at a customer for which we provide services although we were found not to be responsible, may also result in negative publicity, which would harm our reputation among our customers and the public, cause us to lose existing and future contracts or make it more difficult for us to compete effectively, thereby significantly harming our operating performance. In addition, the occurrence of an accident or incident might also make it more expensive or extremely difficult for us to insure against similar events in the future.
 
Many of the sites at which we work are inherently dangerous workplaces.  If we fail to maintain a safe work environment, we may incur losses and lose business.
 
Many of our customers, particularly in the oil and gas and chemical industries, require their inspectors and other contractors working at their facilities to have good safety records because of the inherent danger at these sites.  If our employees are injured at the work place, we will incur costs for the injuries and lost productivity.  In addition, safety records are impacted by the number and amount of workplace incidents involving a contractor’s employees. If our safety record is not within the levels

20


required by our customers, or compares unfavorably to our competitors, we could lose business, be prevented from working at certain facilities or suffer other adverse consequences, all of which could negatively impact our business, revenues, reputation and profitability.
 
Most of our computer and communications hardware is located at a single facility, the failure of which would harm our business and results of operations.
 
Most of our computer and communications hardware is located at a single facility. We have a back-up data-center and storage in a different geographic area. Should a natural disaster or some other event occur that damages our primary data center or significantly disrupts its operation, such as human error, fire, flood, power loss, telecommunications failure, break-ins, terrorist attacks, acts of war and similar events, we could suffer temporary interruption of key functions and capabilities before the back-up facility is fully operational.
 
If we are unable to attract and retain a sufficient number of trained certified technicians, engineers and scientists at competitive wages, our operational performance may be harmed and our costs may increase.
 
We believe that our success depends, in part, upon our ability to attract, develop and retain a sufficient number of trained certified technicians, engineers and scientists at competitive wages. The demand for such employees fluctuates as the demand for NDT and inspection services fluctuate. There is a reduced demand for technicians because of a slowdown of spending in the oil and gas industry. However, if the demand for qualified technicians increases, we will likely experience increased labor costs. The markets for our products and services require us to use personnel trained and certified in accordance with standards set by domestic or international standard-setting bodies, such as the American Society of Non-Destructive Testing or the American Petroleum Institute. Because of the limited supply of these certified technicians, we expend substantial resources maintaining in-house training and certification programs. If we fail to attract sufficient new personnel or fail to motivate and retain our current personnel, our ability to perform under existing contracts and orders or to pursue new business may be harmed, preventing us from growing our business or causing us to lose customers and revenues, and the costs of performing such contracts and orders may increase, which would likely reduce our margins.
 
We operate in competitive markets and if we are unable to compete successfully, we could lose market share and revenues and our margins could decline.
 
We face strong competition from NDT and a variety of niche asset protection providers, both larger and smaller than we are. Some of our competitors have greater financial resources than we do and could focus their substantial financial resources to develop a competing business model or develop products or services that are more attractive to potential customers than what we offer. Some of our competitors are business units of companies substantially larger than us and could attempt to combine asset protection solutions into an integrated offering to customers who already purchase other types of products or services from them. Our competitors may offer asset protection solutions at lower prices than ours in order to attempt to gain market share. Smaller niche competitors with small customer bases could be aggressive in their pricing in order to retain customers. These competitive factors could reduce our market share, revenues and profits.
 
Events such as natural disasters, industrial accidents, epidemics, war and acts of terrorism, and adverse weather conditions could disrupt our business or the business of our customers, which could significantly harm our operations, financial results and cash flow.
 
Our operations and those of our customers are susceptible to the occurrence of catastrophic events outside our control, ranging from severe weather conditions to acts of war and terrorism. Any such events could cause a serious business disruption that reduces our customers’ need or interest in purchasing our asset protection solutions. For example, significant wild fires in the Fort McMurray vicinity in Canada resulted in a reduction in revenue and earnings for our Canadian operations in the fourth quarter of fiscal 2016. In the past, such events have resulted in order cancellations and delays because customer equipment, facilities or operations have been damaged, or are not then operational or available. A large portion of our customer base has operations in the Gulf of Mexico, which is subject to hurricanes in the first and second quarters of our fiscal year. Hurricane-related disruptions to our customers’ operations have adversely affected our revenues in the past. Such events in the future may result in substantial delays in the provision of solutions to our customers and the loss of valuable equipment. In addition, our third quarter fiscal results can be adversely impacted by severe winter weather conditions, which can result in lost work days and temporary closures of customer facilities or outdoor projects.  Any cancellations, delays or losses due to such events may significantly reduce our revenues and harm our operating performance.
 
If we lose key members of our senior management team upon whom we are dependent, we may be less effective in managing our operations and may have more difficulty achieving our strategic objectives.

21


 
Our future success depends to a considerable degree upon the availability, contributions, vision, skills, experience and effort of our senior management team. We have in place various compensation programs, such as an annual cash incentive program, equity incentive program and a severance policy, each designed to incentivize and retain our key senior managers. We have also made changes to our senior management structure so that executive officers other than our founder, Dr. Sotirios Vahaviolos, provide executive leadership for operational, business development and strategy matters. At this time, we do not have any reason to believe that we may lose the services of any of these key persons in the foreseeable future and we believe our compensation programs will help us retain these individuals. We believe we have sufficient depth in our executive management to continue our success if we were to lose the services of an executive. However, an unplanned loss or interruption of the service of two or more key members of our senior management team could harm our business, financial condition and results of operations and could significantly reduce our ability to manage our operations and implement our strategy.
 
Deteriorations in economic conditions in certain markets or other factors may cause us to recognize impairment charges for our goodwill.
 
As of May 31, 2016, the carrying amount of our goodwill was approximately $169 million, of which approximately $36 million relates to our International segment. A significant portion of our international operations are concentrated in Europe and Brazil. Significant deterioration in industry or economic conditions in which we operate, disruptions to our business, not effectively integrating acquired businesses, or other factors, may cause impairment charges to goodwill in future periods.
 
The success of our businesses depends, in part, on our ability to develop new asset protection solutions, increase the functionality of our current offerings and meet the needs and demands of our customers.
 
The market for asset protection solutions is impacted by technological change, uncertain product lifecycles, shifts in customer demands and evolving industry standards and regulations. We may not be able to successfully develop and market new asset protection solutions that comply with present or emerging industry regulations and technology standards. Also, new regulations or technology standards could increase our cost of doing business.
 
From time to time, our customers have requested greater value and functionality in our solutions. As part of our strategy to enhance our asset protection solutions and grow our business, we continue to make investments in the research and development of new technologies, inspection tools and methodologies. We believe our future success will depend, in part, on our ability to continue to design new, competitive and broader asset protection solutions, enhance our current solutions and provide new, value-added services. Many traditional NDT and inspection services are subject to price competition by our customers. Accordingly, the need to demonstrate our value-added services is becoming more important. Developing new solutions will require continued investment, and we may experience unforeseen technological or operational challenges. In addition, our asset protection software is complex and can be expensive to develop, and new software and software enhancements can require long development and testing periods. If we are unable to develop new asset protection solutions or enhancements that meet market demands on a timely basis, we may experience a loss of customers or otherwise be likely to lose opportunities to earn revenues and to gain customers or access to markets, and our business and results of operations will be adversely affected.
 
Even if we develop new solutions, if our customers, or potential customers, do not see the value our solutions have over competing products and services, our operating results could be adversely impacted. In addition, because the asset protection solutions industry is rapidly evolving, we could lose insight into trends that may be emerging, which would further harm our competitive position by making it difficult to predict and respond to customer needs. If the market for our asset protection solutions does not continue to develop, our ability to grow our business would be limited and we might not be able to maintain profitability. If we cannot convince our customers of the advantages and value of our advanced NDT services we could lose large contracts or suffer lower profit margin.
 
If our software or system produces inaccurate information or are incompatible with the systems used by our customers and make us unable to successfully provide our solutions, it could lead to a loss of revenues and customers.
 
Our software and systems are complex and, accordingly, may contain undetected errors or failures. Software or system defects or inaccurate data may cause incorrect recording, reporting or display of information related to our asset protection solutions. Any such failures, defects and inaccurate data may prevent us from successfully providing our asset protection solutions, which could result in lost revenues. Software or system defects or inaccurate data may lead to customer dissatisfaction and could cause our customers to seek to hold us liable for any damages incurred. As a result, we could lose customers, our reputation may be harmed and our financial condition and results of operations could be materially adversely affected.
 

22


We currently serve a commercial, industrial and governmental customer base that uses a wide variety of constantly changing hardware, software solutions and operating systems. Our asset protection solutions need to interface with these non-standard systems in order to gather and assess data. Our business depends on the following factors, among others:
 
our ability to integrate our technology with new and existing hardware and software systems;

our ability to anticipate and support new standards, especially Internet-based standards; and

our ability to integrate additional software modules under development with our existing technology and operational processes.
 
If we are unable to adequately address any of these factors, our results of operations and prospects for growth and profitability would be adversely impacted.
 
The seasonal nature of our business reduces our revenues and profitability in our first and third fiscal quarters.

Our business, primarily in our Services segment, is seasonal. Our first and third fiscal quarter revenues for our Services segment are typically lower than our revenues in the second and fourth fiscal quarters because demand for our asset protection solutions from the oil and gas as well as the fossil and nuclear power industries increases during their non-peak production periods. For instance, U.S. refineries’ non-peak periods are generally in our second fiscal quarter, when they are retooling to produce more heating oil for winter, and in our fourth fiscal quarter, when they are retooling to produce more gasoline for summer. As a result of these trends, we generally have reduced cash flows in our second and fourth fiscal quarters, as collections of receivables lag behind revenues, possibly requiring us to borrow under our credit agreement. In addition, most of our operating expenses, such as employee compensation and property rental expense, are relatively fixed over the short term. Moreover, our spending levels are based in part on our expectations regarding future revenues. As a result, if revenues for a particular quarter are below expectations, we may not be able to proportionately reduce operating expenses for that quarter. We expect that the impact of seasonality will continue.
 
Our business, and the industries we currently serve, are currently subject to governmental regulation, and may become subject to modified or new government regulation that may negatively impact our ability to market our asset protection solutions.
 
We incur substantial costs in complying with various government regulations and licensing requirements. For example, the transportation and overnight storage of radioactive materials used in providing certain of our asset protection solutions such as radiography are subject to regulation under federal and state laws and licensing requirements. Our Services segment is currently licensed to handle radioactive materials by the U.S. Nuclear Regulatory Commission (NRC) and over 20 state regulatory agencies. If we allegedly fail to comply with these regulations, we may be investigated and incur significant legal expenses associated with such investigations, and if we are found to have violated these regulations, we may be fined or lose one or more of our licenses or permits, which would prevent or restrict our ability to provide radiography services. In addition, while we are investigated, we may be required to suspend work on the projects associated with our alleged noncompliance, resulting in loss of profits or customers, and damage to our reputation. Many of our customers have strict requirements concerning safety or loss time occurrences and if we are unable to meet these requirements it could result in lost revenues. In the future, federal, state, provincial or local governmental agencies may seek to change current regulations or impose additional regulations on our business. Any modified or new government regulation applicable to our current or future asset protection solutions may negatively impact the marketing and provision of those solutions and increase our costs and the price of our solutions.
 
Additionally, greenhouse gases that result from human activities, including burning of fossil fuels, have been the focus of increased scientific and political scrutiny and are being subjected to various legal requirements. International agreements, national laws, state laws and various regulatory schemes limit or otherwise regulate emissions of greenhouse gases, and additional restrictions are under consideration by different governmental entities. We derive a significant amount of revenues and profits from such industries, including oil and gas, power generation and transmission, and chemicals processing. Such regulations could negatively impact our customers, which could negatively impact the market for the services and products we provide. This could materially adversely affect our business, financial condition, results of operations and cash flows.
 
We rely on certification of our NDT solutions by industry standards-setting bodies. We and/or our subsidiaries currently have International Organization for Standardization (ISO) 9001:2008 certification, ISO 14001:2004 certification and OHSAS 18001:2007 certification. In addition, we currently have Nadcap (formerly National Aerospace and Defense Contractors Accreditation Program) and similar certifications for certain of our locations. We continually review our NDT solutions for

23


compliance with the requirements of industry specification standards and the Nadcap special processes quality requirements. However, if we fail to maintain our ISO, Nadcap or other certifications, our business may be harmed because our customers generally require that we have these certification before they purchase our NDT solutions.
 
Intellectual property may impact our business and results of operations.
 
Our ability to compete effectively depends in part upon the maintenance and protection of the intellectual property related to our asset protection solutions. Patent protection is unavailable for certain aspects of the technology and operational processes important to our business and any patent or patent applications, trademarks or copyrights held by us or to be issued to us, may not adequately protect us. Some of our trademarks that are not in use may become available to others. To date, we have relied principally on copyright, trademark and trade secrecy laws, as well as confidentiality agreements and licensing arrangements, to establish and protect our intellectual property. However, we have not obtained confidentiality agreements from all of our customers and vendors. Although we obligate all of our employees to confidentiality, we cannot be certain that these obligations will be honored or enforceable.
 
We may require additional capital to support business growth, which might not be available.
 
We intend to continue making investments to support our business growth and may require additional funds to respond to business challenges or opportunities, including the need to develop new, or enhance our current, asset protection solutions, enhance our operating infrastructure or acquire businesses and technologies. Accordingly, we may need to engage in equity or debt financings to secure additional funds. If we raise additional funds through further issuances of equity or convertible debt securities, our current stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences and privileges superior to those of holders of our common stock. While our current bank financing is meeting our current need, any debt financing secured by us in the future could involve restrictive covenants relating to our capital-raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities, including potential acquisitions. In addition, no assurance can be given that adequate or acceptable financing will be available to us, in which case we may not be able to grow our business or respond to business challenges.
 
Our credit agreement contains financial and operating restrictions that may limit our access to credit. If we fail to comply with financial or other covenants in our credit agreement, we may be required to repay indebtedness to our existing lenders, which may harm our liquidity.
 
Our credit agreement contains financial covenants that require us to maintain compliance with specified financial ratios. If we fail to comply with these covenants, the lenders could prevent us from borrowing under our credit agreement, require us to pay all amounts outstanding, require that we cash collateralize letters of credit issued under the credit agreement and restrict us from making acquisitions. If the maturity of our indebtedness is accelerated, we then may not have sufficient funds available for repayment or the ability to borrow or obtain sufficient funds to replace the accelerated indebtedness on terms acceptable to us, or at all.
 
Our current credit agreement also imposes restrictions on our ability to engage in certain activities, such as creating liens, making certain investments, incurring more debt, disposing of certain property, paying dividends and making distributions and entering into a new line of business.  While these restrictions have not impeded our business operations to date, if our plans change, these restrictions could be burdensome or require that we pay fees to have the restrictions waived.
 
Any real or perceived internal or external electronic security breaches in connection with the use of our asset protection solutions could harm our reputation, inhibit market acceptance of our solutions and cause us to lose customers.
 
We and our customers use our asset protection solutions to compile and analyze sensitive or confidential customer-related information. In addition, some of our asset protection solutions allow us to remotely control and store data from equipment at commercial, institutional and industrial locations. Our asset protection solutions rely on the secure electronic transmission of proprietary data over the Internet or other networks. The occurrence or perception of security breaches in connection with our asset protection solutions or our customers’ concerns about internet security or the security of our solutions, whether warranted or not, would likely harm our reputation or business, inhibit market acceptance of our asset protection solutions and cause us to lose customers, any of which would harm our financial condition and results of operations.
 
We may come into contact with sensitive information or data when we perform installation, maintenance or testing functions for our customers. Even the perception that we have improperly handled sensitive, confidential information would have a negative effect on our business. If, in handling this information, we fail to comply with privacy or security laws, we could incur

24


civil liability to government agencies, customers and individuals whose privacy is compromised. In addition, third parties may attempt to breach our security or inappropriately harm our asset protection solutions through computer viruses, electronic break-ins and other disruptions. If a breach is successful, confidential information may be improperly obtained, for which we may be subject to lawsuits and other liabilities.
 
Risks Related to Our Common Stock
 
Our stock price could fluctuate for numerous reasons, including variations in our results.
 
Our quarterly operating results have fluctuated in the past and may do so in the future. Accordingly, we believe that period-to-period comparisons of our results of operations may be the best indicators of our business. You should not rely upon the results of one quarter as an indication of future performance. Our revenues and operating results may fall below the expectations of securities analysts or investors in any future period. Our failure to meet these expectations may cause the market price of our common stock to decline, perhaps substantially.  Our quarterly revenues and operating results may vary depending on a number of factors, including those listed previously under “Risks Related to Our Business.”  In addition, the price of our common stock is subject to general economic, market, industry, and competitive conditions, the risk factors discussed below and numerous other conditions outside of our control.
 
A significant stockholder controls the direction of our business. The concentrated ownership of our common stock may prevent other stockholders from influencing significant corporate decisions.
 
Dr. Sotirios J. Vahaviolos, our Chairman, Chief Executive Officer and President, owns approximately 43% of our outstanding common stock. As a result, Dr. Vahaviolos effectively controls our Company and has the ability to exert substantial influence over all matters requiring approval by our shareholders, including the election and removal of directors, amendments to our certificate of incorporation, and any proposed merger, consolidation or sale of all or substantially all of our assets and other corporate transactions. This concentration of ownership could be disadvantageous to other shareholders with differing interests from Dr. Vahaviolos.
 
We currently have no plans to pay dividends on our common stock.
 
We have not declared or paid any cash dividends on our common stock to date, and we do not anticipate declaring or paying any dividends on our common stock in the foreseeable future. To the extent we do not pay dividends on our common stock, investors must look solely to stock appreciation for a return on their investment.
 
Shares eligible for future sale may cause the market price for our common stock to decline even if our business is doing well.
 
Future sales by us or by our existing shareholders of substantial amounts of our common stock in the public market, or the perception that these sales may occur, could cause the market price of our common stock to decline. This could also impair our ability to raise additional capital in the future through the sale of our equity securities. Under our second amended and restated certificate of incorporation, we are authorized to issue up to 200,000,000 shares of common stock, of which approximately 28,955,000 shares of common stock were outstanding as of August 5, 2016. In addition, we have approximately 3,118,000 shares of common stock reserved for issuance related to stock options and restricted stock units that were outstanding as of August 5, 2016. We cannot predict the size of future issuances of our common stock or the effect, if any, that future sales and issuances of shares of our common stock, or the perception of such sales or issuances, would have on the market price of our common stock.
 
Provisions of our charter, bylaws and of Delaware law could discourage, delay or prevent a change of control of our company, which may adversely affect the market price of our common stock.
 
Certain provisions of our second amended and restated certificate of incorporation and amended and restated bylaws could discourage, delay or prevent a merger, acquisition, or other change of control that stockholders may consider favorable, including transactions in which our stockholders might otherwise receive a premium for their shares. These provisions also could limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock. Stockholders who wish to participate in these transactions may not have the opportunity to do so. Furthermore, these provisions could prevent or frustrate attempts by our stockholders to replace or remove our management. These provisions:
 
allow the authorized number of directors to be changed only by resolution of our board of directors;

25



require that vacancies on the board of directors, including newly created directorships, be filled only by a majority vote of directors then in office;

authorize our board of directors to issue, without stockholder approval, preferred stock that, if issued, could operate as a “poison pill” to dilute the stock ownership of a potential hostile acquirer to prevent an acquisition that is not approved by our board of directors;

require that stockholder actions must be effected at a duly called stockholder meeting by prohibiting stockholder action by written consent;

prohibit cumulative voting in the election of directors, which may otherwise allow holders of less than a majority of stock to elect some directors; and

establish advance notice requirements for stockholder nominations to our board of directors or for stockholder proposals that can be acted on at stockholder meetings and limit the right to call special meetings of stockholders to the Chairman of the Board, the Chief Executive Officer, the board of directors acting pursuant to a resolution adopted by a majority of directors or the Secretary upon the written request of stockholders entitled to cast not less than 35% of all the votes entitled to be cast at such meeting.
 
In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which may, unless certain criteria are met, prohibit large stockholders, in particular those owning 15% or more of our outstanding voting stock, from merging or combining with us for a prescribed period of time.

ITEM 1B.                                       UNRESOLVED STAFF COMMENTS
 
None.
 
ITEM 2.                                                PROPERTIES
 
As of May 31, 2016, we operated approximately 120 offices in 14 countries, with our corporate headquarters located in Princeton Junction, New Jersey. Our headquarters in Princeton Junction is our primary location, where most of our manufacturing and research and development is conducted. While we lease most of our facilities, as of May 31, 2016, we owned properties located in Monroe, North Carolina; Trainer, Pennsylvania; LaPorte, Texas; Burlington, Washington; Gillette, Wyoming; and Jonquiere, Quebec. Our Services segment, utilizes approximately 80 offices throughout North America (including Canada). Our Products and Systems segment’s primary location is in our Princeton Junction, NJ facility. Our International segment has approximately 40 offices including locations in Belgium, Brazil, France, Germany, Greece, India, the Netherlands, and the United Kingdom. We believe that all of our facilities are well maintained and are suitable and adequate for our current needs.
 
ITEM 3.                                                LEGAL PROCEEDINGS
 
We are subject to periodic legal proceedings, investigations and claims that arise in the ordinary course of business. See “Litigation” in Note 18 — Commitments and Contingencies to our audited consolidated financial statements contained in Item 8 of this report for a description of legal proceedings involving us and our business, which is incorporated herein by reference.


ITEM 4.                                                MINE SAFETY DISCLOSURES
 
None.

ITEM 5.                                                MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASE OF EQUITY SECURITIES
 
Market for Common Stock
 
Our common stock currently trades on the New York Stock Exchange (NYSE) under the ticker symbol “MG”. The following table sets forth for the periods indicated the range of high and low sales prices of our common stock.
 

26


 
 
Year ended May 31, 2016
 
Year ended May 31, 2015
 
 
High
 
Low
 
High
 
Low
Quarter ended August 31,
 
$
20.14

 
$
13.88

 
$
25.04

 
$
20.70

Quarter ended November 30,
 
$
21.53

 
$
12.79

 
$
21.55

 
$
15.98

Quarter ended February 28,
 
$
22.59

 
$
18.42

 
$
21.50

 
$
15.87

Quarter ended May 31,
 
$
26.00

 
$
22.02

 
$
19.34

 
$
17.50

 
Holders of Record
 
As of August 5, 2016, there were 9 holders of record of our Common Stock. The number of record holders was determined from the records of our transfer agent and does not include beneficial owners of common stock whose shares are held in the names of various security brokers, dealers, and registered clearing agencies. The transfer agent of our common stock is American Stock Transfer & Trust Company, 6201 15th Avenue, Brooklyn, New York 11219.
 
Dividends
 
No cash dividends have been paid on our Common Stock to date. We currently intend to retain our future earnings, if any, to finance the expansion of our business and do not expect to pay any cash dividends in the foreseeable future.
 
Purchases of Equity Securities
 
The following sets forth the shares of our common stock we acquired during the fourth quarter of fiscal 2016 pursuant to the surrender of shares by employees to satisfy minimum tax withholding obligations in connection with the vesting of restricted stock units.
 
Month Ending
 
Total Number of
Shares (or Units)
Purchased
 
Average Price Paid
per Share (or Unit)
April 30, 2016
 
856
 
$
25.37

 

27


ITEM 6.                                              SELECTED FINANCIAL DATA
 
The following table presents selected financial data for each of the last five fiscal years. This selected financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 and the audited consolidated financial statements and the notes thereto in Item 8 in this Annual Report.
 
 
For the year ended May 31,
 
 
 
2016 (1)
 
2015 (1)
 
2014 (1)
 
2013 (2)
 
2012 (3)
 
 
 
($ in thousands, except share and per share data)
 
Statement of Income Data
 
 

 
 

 
 

 
 

 
 

 
Revenues
 
$
719,181

 
$
711,252

 
$
623,447

 
$
529,282

 
$
436,875

 
Gross profit
 
203,008

 
184,733

 
172,943

 
148,371

 
129,690

 
Income from operations
 
43,177

 
30,353

 
38,295

 
27,554

 
36,098

 
Net income attributable to Mistras Group, Inc.
 
$
24,654

 
$
16,081

 
$
22,518

 
$
11,646

 
$
21,353

 
 
 
 
 
 
 
 
 
 
 
 
 
Per Share Information:
 
 

 
 

 
 

 
 

 
 

 
Weighted average common shares outstanding:
 
 

 
 

 
 

 
 

 
 

 
Basic
 
28,856

 
28,613

 
28,365

 
28,141

 
27,839

 
Diluted
 
29,891

 
29,590

 
29,324

 
29,106

 
28,685

 
Earnings per common share:
 
 

 
 

 
 

 
 

 
 

 
Basic
 
$
0.85

 
$
0.56

 
$
0.79

 
$
0.41

 
$
0.77

 
Diluted
 
$
0.82

 
$
0.54

 
$
0.77

 
$
0.40

 
$
0.74

 
 
 
 
 
 
 
 
 
 
 
 
 
Balance Sheet Data
 
 

 
 

 
 

 
 

 
 

 
Cash and cash equivalents
 
$
21,188

 
$
10,555

 
$
10,020

 
$
7,802

 
$
8,410

 
Total assets
 
482,675

 
471,727

 
443,972

 
377,997

 
329,816

 
Total long-term debt and obligations under capital leases, including current portion
 
104,776

 
132,822

 
97,563

 
77,956

 
59,274

 
Total Mistras Group, Inc. stockholders’ equity
 
$
276,163

 
$
244,819

 
$
242,104

 
$
210,053

 
$
193,012

 
 
 
 
 
 
 
 
 
 
 
 
 
Cash Flow Data:
 
 

 
 

 
 

 
 

 
 

 
Net cash provided by operating activities
 
$
68,124

 
$
49,840

 
$
36,873

 
$
43,503

 
$
31,402

 
Net cash used in investing activities
 
(16,752
)
 
(49,651
)
 
(38,005
)
 
(45,479
)
 
(37,512
)
 
Net cash (used in) provided by financing activities
 
(40,378
)
 
2,066

 
3,262

 
1,144

 
2,009

 

1 - Includes pre-tax charges (benefits) of $6.0 million in fiscal 2016, $0.1 million in fiscal 2015 and $(2.4) million in fiscal 2014 relating to special items. Net income was (decreased) increased by these items, net of taxes, by ($3.2) million in fiscal 2016, $1.0 million in fiscal 2015 and $2.4 million in fiscal 2014, respectively. The (decrease) increase of these items on diluted earnings per share were ($0.11) in fiscal 2016, $0.03 in fiscal 2015 and $0.08 in fiscal 2014, respectively.

2 - Includes pre-tax charges of $7.8 million relating to: goodwill impairment charge of $9.9 million and acquisition related benefit of ($2.1 million). The impact of these items, net of taxes, on net income and diluted earnings per share was ($8.3) million and ($0.29), respectively.

3 - Includes pre-tax charges of $1.3 million relating to: acquisition related expense of $2.0 million and gain on extinguishment of long-term debt of ($0.7 million). The impact of these items, net of taxes, on net income and diluted earnings per share was ($0.8) million and ($0.03), respectively.



28


ITEM 7.                                                MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION
 
The following Management’s Discussion and Analysis (“MD&A”) provides a narrative of our results of operations for the years ended May 31, 2016, 2015 and 2014, respectively, and our financial position as of May 31, 2016 and 2015, respectively. The MD&A should be read together with our consolidated financial statements and related notes included in Item 8 in this Annual Report on Form 10-K. In this annual report, our fiscal years, which end on May 31, are identified according to the calendar year in which they end (e.g., the fiscal year ended May 31, 2016 is referred to as “fiscal 2016”), and unless otherwise specified or the context otherwise requires, “Mistras,” “the Company,” “we,” “us” and “our” refer to Mistras Group, Inc. and its consolidated subsidiaries. The MD&A includes the following sections:
 
Forward-Looking Statements
Overview
Consolidated Results of Operations
Segment Results of Operations
Liquidity and Capital Resources
Critical Accounting Estimates
Recent Accounting Pronouncements

Forward-Looking Statements
 
This report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 (Securities Act), and Section 21E of the Securities Exchange Act of 1934 (Exchange Act). Such forward-looking statements include those that express plans, anticipation, intent, contingency, goals, targets or future development and/or otherwise are not statements of historical fact. See “Forward-Looking Statements” at the beginning of Item 1 of this Report.
 
Overview
 
We offer our customers “one source for asset protection solutions”® and are a leading global provider of technology-enabled asset protection solutions used to evaluate the structural integrity and reliability of critical energy, industrial and public infrastructure. We combine industry-leading products and technologies, expertise in mechanical integrity (MI), Non-Destructive Testing (NDT), Destructive Testing (DT) and predictive maintenance (PdM) services, process and fixed asset engineering and consulting services, proprietary data analysis and our world class enterprise inspection database management and analysis software, PCMS, to deliver a comprehensive portfolio of customized solutions, ranging from routine inspections to complex, plant-wide asset integrity management and assessments. These mission critical solutions enhance our customers’ ability to comply with governmental safety and environmental regulations, extend the useful life of their assets, increase productivity, minimize repair costs, manage risk and avoid catastrophic disasters. Our operations consist of three reportable segments: Services, International and Products and Systems.
 
Services provides asset protection solutions predominantly in North America with the largest concentration in the United States along with a growing Canadian services business, consisting primarily of NDT, inspection and engineering services that are used to evaluate the structural integrity and reliability of critical energy, industrial and public infrastructure.

International offers services, products and systems similar to those of the other segments to global markets, in Europe, the Middle East, Africa, Asia and South America, but not to customers in China and South Korea, which are served by the Products and Systems segment.

Products and Systems designs, manufactures, sells, installs and services the Company’s asset protection products and systems, including equipment and instrumentation, predominantly in the United States.

Given the role our solutions play in ensuring the safe and efficient operation of infrastructure, we have historically provided a majority of our services to our customers on a regular, recurring basis. We serve a global customer base of companies with asset-intensive infrastructure, including companies in the oil and gas (downstream, midstream, upstream and petrochemical), power generation (natural gas, fossil, nuclear, alternative, renewable, and transmission and distribution), public infrastructure, chemicals, commercial aerospace and defense, transportation, primary metals and metalworking, pharmaceutical/biotechnology and food processing industries and research and engineering institutions. As of May 31, 2016, we had approximately 5,700

29


employees in approximately 120 offices across 14 countries. We have established long-term relationships as a critical solutions provider to many of the leading companies in our target markets.

For the last several years, we have focused on introducing our advanced asset protection solutions to our customers using proprietary, technology-enabled software and testing instruments, including those developed by our Products and Systems segment. During this period, the demand for outsourced asset protection solutions, in general, has increased, creating demand from which our entire industry has benefited. We believe continued growth can be realized in all of our target markets. Concurrent with this growth, we are working on building our infrastructure to profitably absorb additional growth and have made a number of acquisitions in an effort to leverage our fixed costs, grow our base of experienced, certified personnel, expand our product and technical capabilities and increase our geographical reach.
 
We have increased our capabilities and the size of our customer base through the development of applied technologies and managed support services, organic growth and the integration of acquired companies. These acquisitions have provided us with additional products, technologies, resources and customers that we believe will enhance our advantages over our competition.
 
Global financial markets continue to experience uncertainty, including tight liquidity and credit availability, relatively low consumer confidence, slow economic growth, fluctuating oil prices and volatile currency exchange rates. However, we believe these conditions have allowed us to selectively hire new talented individuals that otherwise might not have been available to us, and to make acquisitions of complementary businesses at reasonable valuations.

Consolidated Results of Operations
 
The following table summarizes our consolidated statements of operations for fiscal 2016, 2015 and 2014:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
 
($ in thousands)
Revenues
$
719,181

 
$
711,252

 
$
623,447

Gross profit
203,008

 
184,733

 
172,943

Gross profit as a % of Revenue
28
%
 
26
%
 
28
%
Total operating expenses
159,831

 
154,380

 
134,648

Operating expenses as a % of Revenue
22
%
 
22
%
 
22
%
Income from operations
43,177

 
30,353

 
38,295

Income from operations as a % of Revenue
6
%
 
4
%
 
6
%
Interest expense
4,762

 
4,622

 
3,192

Income before provision for income taxes
38,415

 
25,731

 
35,103

Provision for income taxes
13,765

 
9,740

 
12,528

Net income
24,650

 
15,991

 
22,575

Less: net (loss) income attributable to noncontrolling interests, net of taxes
(4
)
 
(90
)
 
57

Net income attributable to Mistras Group, Inc.
$
24,654

 
$
16,081

 
$
22,518



The Company uses Adjusted EBITDA, a non-GAAP metric, to measure its consolidated operating performance and assist in comparing performance from period to period on a consistent basis. A reconciliation of Adjusted EBITDA to net income is provided below for the fiscal years ended May 31, 2016, 2015 and 2014:

30


 
For the year ended May 31,
 
2016
 
2015
 
2014
 
 
 
($ in thousands)
 
 
Net income attributable to Mistras Group, Inc.
$
24,654

 
$
16,081

 
$
22,518

Interest expense
4,762

 
4,622

 
3,192

Provision for income taxes
13,765

 
9,740

 
12,528

Depreciation and amortization
32,474

 
33,286

 
28,429

Share-based compensation expense
6,514

 
6,579

 
6,261

Acquisition-related expense, net
(1,453
)
 
(5,167
)
 
(2,657
)
Charges related to sale of foreign operations

 
2,516

 

Severance costs
1,107

 
1,723

 
306

Foreign exchange (gains) losses
(59
)
 
1,474

 
101

Asset write-offs and lease terminations

 
1,029

 

Legal settlement
6,320

 

 

Adjusted EBITDA
$
88,084

 
$
71,883

 
$
70,678

 
Note about Non-GAAP Measures
 
Adjusted EBITDA is a performance measure used by management that is not calculated in accordance with U.S. generally accepted accounting principles (GAAP). Adjusted EBITDA is defined in this Report as net income attributable to Mistras Group, Inc. plus: interest expense, provision for income taxes, depreciation and amortization, share-based compensation expense, and certain acquisition-related costs (including transaction due diligence costs and adjustments to the fair value of contingent consideration), foreign exchange (gain) loss and, if applicable, certain special items which are noted.
 
Our management uses Adjusted EBITDA as a measure for planning and forecasting overall expectations and for evaluating actual results against such expectations. Adjusted EBITDA is also used as a performance evaluation metric for certain of our executive and employee incentive compensation programs.

Later in this MD&A under the heading "Income for Operations", the non-GAAP financial performance measure "Income before special items" is used for each of our three segments and the "Total Company", with tables reconciling the measure to a financial measure under GAAP. This non-GAAP measure excludes from the GAAP measure "Income from Operations" (a) transaction expenses related to acquisitions, such as professional fees and due diligence costs (b) the net changes in the fair value of acquisition-related contingent consideration liabilities and (c) nonrecurring items. These items have been excluded from the GAAP measure because these expenses and credits are not related to the Company’s or Segment’s core business operations. The acquisition related costs and special items can be a net expense or credit in any given period.

In the MD&A section "Liquidity and Capital Resources", we use the term "free cash flow", a non-GAAP measurement. We define free cash flow as cash provided by operating activities less capital expenditures (which are purchases of property, plant and equipment and of intangible assets and classified as an investing activity). Free cash flow, which does not represent residual cash flow available for discretionary expenditures since items such as debt repayments are not deducted in determining such measures, for fiscal 2016 was $51.9 million, consisting of $68.1 million of operating cash flow less $16.2 million of capital expenditures. For fiscal 2015, free cash flow was $33.9 million consisting of $49.8 million of operating cash flow less $16.0 million of capital expenditures.
 
We believe investors and other users of our financial statements benefit from the presentation Adjusted EBITDA and "Income before special items” for each of our three segments and the "Total Company", and free cash flow in evaluating our operating performance because they provide additional tools to compare our operating performance on a consistent basis and measure underlying trends and results in our business. Adjusted EBITDA removes the impact of certain items that management believes do not directly reflect our core operations. For instance, Adjusted EBITDA generally excludes interest expense, taxes and depreciation and amortization, each of which can vary substantially from company to company depending upon accounting methods and the book value and age of assets, capital structure, capital investment cycles and the method by which assets were acquired. It also eliminates share-based compensation, which is a non-cash expense and is excluded by management when evaluating the underlying performance of our business operations. Similarly, we believe that "Income before special items” for each of our three segments and the "Total Company", provides investors with useful information and more meaningful period over period comparisons by identifying and excluding acquisition-related costs and special items so that the performance of the core business operations can be identified and compared.

31


 
While Adjusted EBITDA is a term and financial measurement commonly used by investors and securities analysts, it has limitations. As a non-GAAP measurement, Adjusted EBITDA has no standard meaning and, therefore, may not be comparable with similar measurements for other companies. Adjusted EBITDA is generally limited as an analytical tool because it excludes charges and expenses we do incur as part of our operations. For example, Adjusted EBITDA excludes income taxes, but we generally incur significant U.S. federal, state and foreign income taxes each year and the provision for income taxes is a necessary cost. Adjusted EBITDA should not be considered in isolation or as a substitute for analyzing our results as reported under U.S. generally accepted accounting principles. In addition, acquisitions are a part of our growth strategy, and therefore acquisition-related items are a necessary cost of the Company’s business. "Income before special items” for each of our three segments and for the consolidated company and “free cash flow” are not metrics used to determine incentive compensation for executives or employees.

Revenues
 
Revenues by segment for fiscal 2016, 2015 and 2014 were as follows:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
 
($ in thousands)
Revenues
 

 
 

 
 

Services
$
553,279

 
$
540,224

 
$
443,229

International
143,025

 
146,953

 
161,395

Products and Systems
30,293

 
31,255

 
33,544

Corporate and eliminations
(7,416
)
 
(7,180
)
 
(14,721
)
 
$
719,181

 
$
711,252

 
$
623,447

 

Fiscal 2016
 
Revenue was $719.2 million in fiscal 2016, an increase of $7.9 million or 1% compared with fiscal 2015, driven by Services segment growth of $13.1 million or 2%, offset by declines in International revenues of $3.9 million or 3%, and the Products & Systems segment of $1.0 million or 3%. The Services segment increase was driven by low single digit organic growth, plus a lesser amount of acquisition-driven growth, offset in part by low single digit unfavorable impact of foreign exchange rates. The decline in International Segment revenues was driven by a combination of high single digit organic growth that was more than offset by the low double digit unfavorable impact of foreign exchange rates. Products and Systems segment revenues declined due to lower sales volume.
 
Management believes that inspection industry revenues declined during fiscal 2016, as evidenced by several of the Company's competitors who reported revenue declines that have been driven by customers spending less on inspection due to pressures stemming from low commodities prices. Despite these difficult market conditions, the Company had modest growth in fiscal 2016, as noted above, driven by market share gains in both the Services and International segments. Revenues from oil and gas customers comprised 56% and 52% of revenues in fiscal 2016 and 2015, respectively. Revenues from oil and gas customers grew by 9% in fiscal 2016. Our top ten customers represented approximately 36% of our fiscal 2016 revenues compared with 33% in fiscal 2015. One customer accounted for 10% of fiscal 2016 revenues.

Fiscal 2015
 
Revenue was $711.3 million in fiscal 2015, an increase of $88 million or 14% compared with fiscal 2014, driven by Services segment growth of $97 million or 22%, that was offset in part by International revenues that declined by $14 million or 9%, and Products and Systems segment revenues that declined by $2 million or 7%. The Services segment increase was driven by a combination of mid-teens acquisition growth and mid-single digit organic revenue growth. The decline in International segment revenues was driven by a combination of unfavorable foreign exchange rates of approximately 7%, modest acquisition growth and a mid-single digit organic decline. Products and Systems segment revenues declined approximately 7% due to lower sales volume.
 
Robust North American market conditions combined with the Company’s market share gains and acquisitions led Services revenue to grow by 38% over prior year during the first half of fiscal 2015. However, a combination of the 50% drop in the

32


price of oil and labor union strikes at various customer sites caused market conditions to slow dramatically in the second half of fiscal year 2015, reducing the Services second half year-over-year revenue growth rate to 8%. Revenues from oil and gas customers comprised 52% and 49% of revenues in fiscal 2015 and 2014, respectively. Revenues from oil and gas customers grew by 22% in fiscal 2015, led by organic gains and from an acquisition. Fiscal 2015 revenue growth from customers in other industries, including industrial, process industries which include chemical and pharmaceutical, power generation and infrastructure grew by 6% over prior year. Our top ten customers represented approximately 33% of fiscal 2015 revenues compared with 38% in fiscal 2014. No single customer accounted for 10% or more of fiscal 2015 revenues.


Gross Profit. Gross profit by segment for fiscal 2016, 2015 and 2014 was as follows:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
 
($ in thousands)
Gross profit
 

 
 

 
 

Services
$
145,262

 
$
135,201

 
$
114,182

    % of segment revenue
26.3
%
 
25.0
%
 
25.8
%
International
43,613

 
34,572

 
44,893

    % of segment revenue
30.5
%
 
23.5
%
 
27.8
%
Products and Systems
14,022

 
14,314

 
14,495

    % of segment revenue
46.3
%
 
45.8
%
 
43.2
%
Corporate and eliminations
111

 
646

 
(627
)
 
$
203,008

 
$
184,733

 
$
172,943

    % of total revenue
28.2
%
 
26.0
%
 
27.7
%
 
Fiscal 2016
 
Gross profit increased $18.3 million, or 10% in fiscal 2016 compared to fiscal 2015. As a percentage of revenues, gross profit margin improved by 220 basis points compared with the prior year to 28.2% in fiscal 2016, reversing a four year trend of declining gross profit margins.
 
The 2016 increase of 220 basis points in gross profit margin was primarily attributable to the International and Services segments. International segment gross margins increased to 30.5% in fiscal 2016 compared with 23.5% in the prior year, driven by improvement in each of our four largest countries, organic revenue growth, prior year management changes and staffing actions that improved technical labor utilization, as well as improvements in sales mix and overhead costs. Services segment gross profit margin improved by approximately 130 basis points compared with fiscal 2015, due primarily to improvements in contract profitability and technician labor utilization. Products and Systems segment gross profit margin improved to 46.3% compared to 45.8% in the prior year driven by cost reductions.
 
Fiscal 2015
 
Gross profit increased $11.8 million, or 7% in fiscal 2015 compared to fiscal 2014. As a percentage of revenues, gross profit margin declined to 26.0% in fiscal 2015 from 27.7% in fiscal 2014.
 
The 2015 decrease of 170 basis points in gross profit margin was primarily attributable to the International and Services segments. International segment gross margins decreased to 23.5% in fiscal 2015 compared with 27.8% in the prior year, due primarily to lower levels of project sales and product sales and lower levels of technical labor utilization. Services segment gross profit margin declined by approximately 80 basis points in fiscal 2015, due primarily to wage increases that exceeded price increases earlier in the Company’s fiscal year and the adverse impact from labor union strikes at various customer sites. Products and Systems segment gross margin improved to 45.8% compared to 43.2% in the prior year driven by a more favorable sales mix which included fewer heavily customized solutions.
 

33


Income from Operations. The following table shows a reconciliation of the segment income before special items to income from operations for fiscal 2016, 2015 and 2014:
 
For the year ended May 31,
 
2016
 
2015
 
2014
 
($ in thousands)
Services:
 

 
 

 
 

Income from operations (GAAP)
$
52,552

 
$
49,142

 
$
43,221

Legal settlement
6,320

 

 

Severance costs
188

 

 

Acquisition-related expense (benefit), net
(1,061
)
 
(639
)
 
1,625

Income before special items (non-GAAP)
57,999

 
48,503

 
44,846

 
 
 
 
 
 
International:
 

 
 

 
 

Income (loss) from operations (GAAP)
$
9,293

 
$
(575
)
 
$
10,238

Severance costs
885

 
1,082

 
306

Asset write-offs and lease terminations

 
872

 

Acquisition-related expense (benefit), net
(520
)
 
(2,926
)
 
(3,452
)
Income (loss) before special items (non-GAAP)
9,658

 
(1,547
)
 
7,092

 
 
 
 
 
 
Products and Systems:
 
 
 

 
 

Income from operations (GAAP)
$
2,688

 
$
2,461

 
$
2,552

Severance costs
34

 
99

 

Asset write-offs and lease terminations

 
157

 

Acquisition-related expense (benefit), net

 

 
(1,035
)
Income before special items (non-GAAP)
2,722

 
2,717

 
1,517

 
 
 
 
 
 
Corporate and Eliminations:
 

 
 

 
 

Loss from operations (GAAP)
$
(21,356
)
 
$
(20,675
)
 
$
(17,716
)
Severance costs

 
542

 

Charges related to sale of foreign operations

 
2,516

 

Acquisition-related expense (benefit), net
128

 
(1,602
)
 
205

Loss before special items (non-GAAP)
(21,228
)
 
(19,219
)
 
(17,511
)
 
 
 
 
 
 
Total Company
 

 
 

 
 

Income from operations (GAAP)
$
43,177

 
$
30,353

 
$
38,295

Special items
$
5,974

 
$
101

 
$
(2,351
)
Income before special items (non-GAAP)
$
49,151

 
$
30,454

 
$
35,944

 
Fiscal 2016
 
Income from operations (GAAP) was $43.2 million for fiscal 2016, an increase of $12.8 million, or 42% compared to fiscal 2015 and income before special items (non-GAAP), exclusive of acquisition-related items and nonrecurring items, was $49.2 million for fiscal 2016, an increase of $18.7 million or 61% compared with fiscal 2015. As a percentage of revenues, income before special items improved by 250 basis points to 6.8% in fiscal 2016 from 4.3% in fiscal 2015.
 
Total operating expenses increased by $5 million, or 4% in fiscal 2016 compared to fiscal 2015, driven by a $6.3 million legal settlement accrual, offset by a $1.3 million, or 1% decline in recurring expenses. The recurring expense decrease was driven by the International segment, which decreased $2.9 million, primarily due to the impact of foreign exchange rates. Offsetting the

34


International decreases were increases of $1.5 million from the Corporate segment, primarily due to legal and bonus expense. The Services and Products and Systems segments were flat from fiscal 2015 to fiscal 2016.
 
Fiscal 2015
 
Income from operations (GAAP) was $30.4 million for fiscal 2015, a $7.9 million decrease compared to fiscal 2014 and income before special items (non-GAAP) was $30.5 million for fiscal 2015, a $5.5 million decrease compared to fiscal 2014. As a percentage of revenues, income before special items dropped to 4.3% in fiscal 2015 from 5.8% in fiscal 2014.
 
Total operating expenses increased $19.7 million, or 15% in fiscal 2015 vs. fiscal 2014, driven by $18.3 million or 13% increase in recurring expense and a $1.4 million increase in special items, primarily from acquisition related expenses. The recurring expense increase was driven by the Services segment, which incurred a year-on-year operating expense increase of $17.4 million or 25%. Operating expenses incurred by acquired companies accounted for $11.6 million of this increase, and increased compensation and benefits to support growth comprised most of the remaining increase. Corporate operating expenses increased by $3.0 million or 18%, due primarily to increased headcount, insurance cost and foreign exchange losses. Products and Systems segment year-on-year operating expenses decreased $1.2 million, primarily due to headcount reductions, while International segment operating expenses decreased by $0.8 million, as incremental operating expenses of acquired companies was more than offset by the impact of foreign exchange rates.
 



Interest Expense
 
Interest expense was $4.8 million in fiscal 2016, $4.6 million in fiscal 2015 and $3.2 million in fiscal 2014. The increase in fiscal 2015 was primarily related to an increase in average borrowings compared to fiscal 2014.
 
Income Taxes
 
Our effective income tax rate was 36% for fiscal 2016 compared to 38% for fiscal 2015. The lower effective tax rate was driven by discrete items, including favorability from reserves pertaining to uncertain tax positions and the absence of increases in the valuation allowance for deferred tax assets in 2016.

Our effective income tax rate was 38% for fiscal 2015 compared to 36% for fiscal 2014. The increase was primarily due to a lower amount of foreign income in fiscal 2015 which is taxed at lower rates and an increase in the valuation allowance for deferred tax assets, offset by the impact of acquisition contingent consideration.

Income tax expense varies as a function of pre-tax income and the level of non-deductible expenses, such as certain amounts of meals and entertainment expense, valuation allowances, and other permanent differences.  It is also affected by discrete items that may occur in any given year, but are not consistent from year to year. Our effective income tax rate may fluctuate over the next few years due to many variables including the amount and future geographic distribution of our pre-tax income, changes resulting from our acquisition strategy, and increases or decreases in our permanent differences.


 
Segment Results of Operations
 
Services Segment
 
Selected financial information for the Services segment was as follows for fiscal 2016, 2015 and 2014:
 

35


 
For the years ended May 31,
 
2016
 
2015
 
2014
 
($ in thousands)
Services segment
 

 
 

 
 

Revenues
$
553,279

 
$
540,224

 
$
443,229

 
 
 
 
 
 
Gross profit
$
145,262

 
$
135,201

 
$
114,182

% of segment revenue
26
%
 
25
%
 
26
%
 
 
 
 
 
 
Operating Expenses
$
92,710

 
$
86,059

 
$
70,961

 
 
 
 
 
 
Income from operations
$
52,552

 
$
49,142

 
$
43,221

% of segment revenue
9
%
 
9
%
 
10
%
 
 
 
 
 
 
Income before special charges (non-GAAP)
$
57,999

 
$
48,503

 
$
44,846

% of segment revenue
10
%
 
9
%
 
10
%
 
 
 
 
 
 
Depreciation and amortization
$
22,725

 
$
22,268

 
$
17,794

 
Revenues
 
In fiscal 2016, Services revenues increased $13.1 million, or 2% compared with fiscal 2015. This increase was driven by low single digit organic revenue growth, and to a lesser extent, acquisition-driven growth, offset in part by a low single digit unfavorable impact of foreign exchange rates. Management believes that inspection industry revenues declined during fiscal 2016, driven by customers spending less due to pressures stemming from low commodities prices. Despite these difficult market conditions, the Services segment experienced positive organic growth in fiscal 2016, driven by market share gains.

Oil and gas customers accounted for approximately 67% and 64% of Services segment revenues in fiscal 2016 and fiscal 2015, respectively. Services' top ten customers accounted for approximately 44% and 42% of Services segment revenues during fiscal 2016 and 2015, respectively. Revenues from Services' largest customer represented approximately 13% of segment revenues in fiscal 2016 and 12% in fiscal 2015.
 
In fiscal 2015, Services revenues increased $97.0 million, or 22% compared with fiscal 2014. The increase was driven by mid-teens acquisition growth and mid-single digit organic growth. Strong market conditions combined with Services' market share gains and acquisitions drove 38% growth in first half revenues. However, the sudden 50% drop in oil prices combined with labor union refinery strikes caused market conditions to slow dramatically in the second half of the fiscal year, reducing Services' second half revenue growth rate to 8% over prior year.

Gross Profit
 
Services segment gross profit margin was 26.3% and 25.0% in fiscal 2016 and fiscal 2015, respectively. The 130 basis point increase in Services segment gross profit margin was primarily due to improvements in contract profitability and technician labor utilization.
 
Our Services segment gross profit margin was 25.0% and 25.8% in fiscal 2015 and fiscal 2014, respectively. The 80 basis point decrease in Services segment gross profit margin was due primarily to wage increases that exceeded price increases earlier in the Company’s fiscal year, as well as market conditions that deteriorated in the second half of fiscal 2015.

Income from Operations

Services segment income from operations (GAAP) improved by $3.4 million, or 7% to $52.6 million and income before special items (non-GAAP) improved by $9.5 million, or 20% to $58.0 million in fiscal 2016. Services operating profit margin before special items improved by 150 basis points to 10.5% in fiscal 2016, driven primarily by the 130 basis point improvement in gross profit margin for the segment.
 

36


In fiscal 2016, Services segment operating expenses rose by $6.7 million, or 8%, due primarily to a $6.3 million settlement of a class action lawsuit involving labor claims. (See Note 18 of our audited consolidated financial statements contained in Item 8 of this report for details of this case). Services' operating expenses exclusive of the legal settlement costs were nearly flat with prior year.
 
Services segment income from operations (GAAP) improved by $5.9 million, or 14% to $49.1 million and income before special items (non-GAAP) improved by $3.7 million or 8%, to $48.5 million in fiscal 2015. Services' operating profit margin before special items declined by 110 basis points to 9.0% in fiscal 2015, driven primarily by the 80 basis point reduction in gross profit margin for the segment.
 
In fiscal 2015, Services segment operating expenses rose by $15 million, or 21%, Operating expenses incurred by acquired companies accounted for $10.8 million of this increase and increased compensation and benefits to support growth comprised most of the remaining increase, offset by acquisition-related benefit.

 
International Segment
 
Selected financial information for our International segment was as follows for fiscal 2016, 2015 and 2014:
 
For the years ended May 31,
 
2016
 
2015
 
2014
 
($ in thousands)
International segment
 

 
 

 
 

Revenues
$
143,025

 
146,953

 
161,395

 
 
 
 
 
 
Gross profit
$
43,613

 
34,572

 
44,893

as % of segment revenue
30
%
 
24
 %
 
28
%
 
 
 
 
 
 
Operating Expenses
$
34,320

 
$
35,147

 
$
34,655

 
 
 
 
 
 
Income (loss) from operations
$
9,293

 
$
(575
)
 
10,238

as % of segment revenue
6
%
 
 %
 
6
%
 
 
 
 
 
 
Income (loss) before special charges (non-GAAP)
$
9,658

 
$
(1,547
)
 
$
7,092

as % of segment revenue
7
%
 
(1
)%
 
4
%
 
 
 
 
 
 
Depreciation and amortization
$
7,774

 
$
8,451

 
$
8,065

 
Revenues
 
International segment revenues declined by $3.9 million, or 3% during fiscal 2016, driven by a combination of high single digit organic growth that was more than offset by the low double digit unfavorable impact of foreign exchange rates. Each of the Company’s four largest international subsidiaries experienced positive organic growth during fiscal 2016. Industries with the largest revenue concentrations in fiscal 2016 were aerospace and defense (39%), oil and gas (21%) and industrials (15%).
 
International segment revenues declined by $14.4 million, or 9% during fiscal 2015 driven by a combination of unfavorable foreign exchange rates of approximately 7%, modest acquisition growth and a mid-single digit organic decline. Industries with the largest revenue concentrations in fiscal 2015 were aerospace and defense (41%), oil and gas (17%) and industrials (15%).


Gross Profit

International segment gross profit for fiscal 2016 increased by $9.0 million or 26% and comprised 30.5% of revenues. The International gross profit margin improved by 700 basis points in fiscal 2016, as improvement in each of the Company's four largest country locations were driven by organic revenue growth, prior year management changes and staffing actions that improved technical labor utilization, improvements in sales mix and reduced overhead costs.  

37


 
International segment gross profit for fiscal 2015 decreased by $10.3 million or 23% and comprised 23.5% of revenues. International gross profit margin fell by 430 basis points in 2015, due primarily to lower levels of project and product sales and lower levels of technician labor utilization.

Income (loss) from Operations
 
International segment income from operations (GAAP) was $9.3 million in fiscal 2016, compared to a loss from operations of $0.6 million in fiscal 2015. International segment income before special items (non-GAAP) was $9.7 million, compared to loss before special items of $1.5 million in fiscal 2015. As a percentage of revenues, the income before special charges was approximately 7% in fiscal 2016, compared with (1)% in fiscal 2015.
 
Segment operating expenses, exclusive of acquisition-related items and special items, declined by $2.9 million, or 8% during fiscal 2016, driven by the impact of lower foreign exchange rates, costs reductions and reduced foreign exchange losses. Recurring operating expenses were 24% and 25%, of segment revenues in fiscal 2016 and 2015, respectively.
 
International segment loss from operations (GAAP) was $0.6 million in fiscal 2015, compared to income from operations of $10.2 million in fiscal 2014. International segment loss before special items (non-GAAP) was $1.5 million in fiscal 2015 compared to income before special items of $7.1 million in fiscal 2014. As a percentage of revenues, the loss before special charges was approximately (1)% in fiscal 2015 compared with 4% in fiscal 2014.
 
Segment operating expenses, exclusive of acquisition-related items and special items, decreased by $0.8 million from fiscal 2014 to fiscal 2015, as incremental operating expenses of acquired companies was more than offset by the impact of foreign exchange rates.
 
Products and Systems Segment
 
Selected financial information for the Products and Systems segment was as follows for fiscal 2016, 2015 and 2014:
 
 
For the years ended May 31,
 
2016
 
2015
 
2014
 
($ in thousands)
Products and Systems segment
 

 
 

 
 

Revenues
$
30,293

 
$
31,255

 
$
33,544

 
 
 
 
 
 
Gross profit
$
14,022

 
$
14,314

 
$
14,495

% of segment revenue
46
%
 
46
%
 
43
%
 
 
 
 
 
 
Operating Expenses
$
11,334

 
$
11,853

 
$
11,943

 
 
 
 
 
 
Income from operations
$
2,688

 
$
2,461

 
$
2,552

% of segment revenue
9
%
 
8
%
 
8
%
 
 
 
 
 
 
Income before special charges (non-GAAP)
$
2,722

 
$
2,717

 
$
1,517

% of segment revenue
9
%
 
9
%
 
5
%
 
 
 
 
 
 
Depreciation and amortization
$
2,323

 
$
2,426

 
$
2,373

 
Revenues
 
Products and Systems segment revenues for fiscal 2016 decreased $1.0 million or 3% compared to fiscal 2015 and by $2.3 million or 7% compared to fiscal 2014. The revenue declines were due to lower sales volume.


Gross Profit

38


 
Products and Systems segment gross profit margin was 46.3% in fiscal 2016, which represented a 50 basis point improvement over fiscal 2015, and a 310 basis point improvement over fiscal 2014. Because of these gross profit margin improvements, gross profits generated by this segment were consistent from fiscal 2014 to fiscal 2016 despite the sales declines. The gross profit margin improvements were driven in both years by a more favorable sales mix which included fewer heavily customized solutions.
 
Income from Operations
 
Products and Systems segment income from operations (GAAP) improved by $0.2 million in fiscal 2016 and decreased by $0.1 million in fiscal 2015. Income before special charges (non-GAAP) improved by over $1.2 million in fiscal 2015 and was flat in fiscal 2016 despite the sales declines experienced. Fiscal 2016 operating profit margins before special charges of 9.0% represented improvements of 30 basis points over fiscal 2015 and of 450 basis points over fiscal 2014. Drivers to these improvements included the improvements in gross profit margin, coupled with operating expense reductions of $1.2 million in fiscal 2015 compared with fiscal 2014, and a further $0.4 million in fiscal 2016 as compared with fiscal 2015. The reductions in operating expenses were driven by lower headcounts in both years.



Corporate and Eliminations
 
The elimination of revenues and cost of revenues products sales by the Products and Systems segment to the International and Services segments is captured in this segment, as well as operating expenses that have not been allocated to other segments. These costs primarily include the costs of corporate support functions, such as finance, legal, human resources and certain other costs. As a percentage of our total revenues, these costs have generally remained consistent over the last three fiscal years, consisting of approximately 3% of total revenues for each of the fiscal years ended 2016, 2015 and 2014, respectively.

Liquidity and Capital Resources
 
Overview
 
The Company has funded its operations from cash provided from operations, bank borrowings and capital lease financings. Management believes that the Company's existing cash and cash equivalents, anticipated cash flows from operating activities, and available borrowings under our credit agreement will be more than sufficient to meet anticipated cash needs over the next 12 months. The Company generated free cash flow, (a non-GAAP measurement defined as operating cash flow reduced by capital expenditures) of $51.9 million in fiscal 2016, compared with $33.9 million in fiscal 2015 and $19.3 million in fiscal 2014. Capital expenditures include both the purchase of property, plant and equipment and of intangible assets.
 
Cash Flows Table
 
The following table summarizes our cash flows for fiscal 2016, 2015 and 2014:
 
Fiscal year
 
2016
 
2015
 
2014
($ in thousands)
 
 
 
 
 
 
Net cash provided by (used in):
 
 

 
 

 
 

Operating Activities
 
$
68,124

 
$
49,840

 
$
36,873

Investing Activities
 
(16,752
)
 
(49,651
)
 
(38,005
)
Financing Activities
 
(40,378
)
 
2,066

 
3,262

Effect of exchange rate changes on cash
 
(361
)
 
(1,720
)
 
88

Net change in cash and cash equivalents
 
$
10,633

 
$
535

 
$
2,218

 
Cash Flows from Operating Activities
 
Cash provided by operating activities in fiscal 2016 improved by $18 million or 37% over the prior fiscal year. This improvement was primarily driven by the Company's $16 million improvement in net income, as adjusted for working capital items and certain non-cash items, most notably the $6 million legal settlement, as well as from reducing Days Sales Outstanding by 2 days.

39


 
Cash provided by operating activities in fiscal 2015 improved by $13 million or 35% over the prior fiscal year. The improvement was primarily attributable to the timing of working capital inflows and outflows, namely a $28 million improvement in the timing of collections of accounts receivable, offset in part by incremental net outflows of $15 million related to the timing of payments relating to accounts payable, and accrued expenses and other liabilities.

Cash Flows from Investing Activities
 
Net cash used in investing activities was $16.8 million in fiscal 2016, principally due to $16.2 million purchases of property, plant and equipment and intangible assets.

Net cash used in investing activities was $49.7 million in fiscal 2015, principally due to acquisitions totaling $34.7 million, net of cash acquired and purchases of property, plant and equipment of $16.0 million.

 
Cash Flows from Financing Activities
 
Net cash used in financing activities in fiscal 2016 was $40 million, as compared with cash provided by financing activities of $2 million in fiscal 2015. Net cash used in financing activities during fiscal 2016 consisted primarily of net repayments of debt totaling $36 million.
 
Net cash provided by financing activities in fiscal 2015 was $2 million, compared to $3 million in fiscal 2014.

 
Effect of Exchange Rate on Changes in Cash
 
For fiscal 2016, 2015 and 2014, exchange rate changes (decreased) increased cash by $(0.4) million, $(1.7) million and $0.1 million, respectively.
 
Cash Balance and Credit Facility Borrowings
 
As of May 31, 2016, the Company had cash and cash equivalents totaling $21.2 million and available borrowing capacity of up to $101.2 million under its credit agreement (as defined below). Borrowings of $69.0 million and letters of credit of $4.8 million were outstanding under the credit agreement at May 31, 2016. We finance our operations primarily through our existing cash balances, cash collected from operations, bank borrowings and capital lease financing. We believe these sources are sufficient to fund our operations for the foreseeable future.

On October 31, 2014, the Company entered into a Third Amendment and Modification Agreement (the “Amendment”), to our revolving line of credit, the Third Amended and Restated Credit Agreement (“Credit Agreement”), dated December 21, 2011, with its lending group. The Amendment increased the Company's revolving line of credit from $125.0 million to $175.0 million and provides that under certain circumstances the line of credit can be increased to $225.0 million. The Company may continue to borrow up to $30.0 million in non-U.S. Dollar currencies and use up to $10.0 million of the credit limit for the issuance of letters of credit. The Amendment also extended the original maturity date of the Credit Agreement from December 20, 2016 to October 30, 2019.
 
Loans under the Credit Agreement bear interest at LIBOR plus an applicable LIBOR margin ranging from 1% to 1.75%, or a base rate less a margin of 1.25% to 0.375%, at our option, based upon our Funded Debt Leverage Ratio. Funded Debt Leverage Ratio is generally the ratio of (1) all outstanding indebtedness for borrowed money and other interest-bearing indebtedness as of the date of determination to (2) EBITDA (which is (a) net income, less (b) income (or plus loss) from discontinued operations and extraordinary items, plus (c) income tax expenses, plus (d) interest expense, plus (e) depreciation, depletion, and amortization (including non-cash loss on retirement of assets), plus (f) stock compensation expense, less (g) cash expense related to stock compensation, plus or minus certain other adjustments) for the period of four consecutive fiscal quarters immediately preceding the date of determination. We have the benefit of the lowest margin if our Funded Debt Leverage Ratio is equal to or less than 0.5 to 1, and the margin increases as the ratio increases, to the maximum margin if the ratio is greater than 2.0 to 1. We will also bear additional costs for market disruption, regulatory changes effecting the lenders’ funding costs, and default pricing of an additional 2% interest rate margin on any amounts not paid when due. Amounts borrowed under the Credit Agreement are secured by liens on substantially all of our assets.


40


The Credit Agreement contains financial covenants requiring that we maintain a Funded Debt Leverage Ratio of no greater than 3.25 to 1 and an Interest Coverage Ratio of at least 3.0 to 1. Interest Coverage Ratio means the ratio, as of any date of determination, of (a) EBITDA for the 12 month period immediately preceding the date of determination, to (b) all interest, premium payments, debt discount, fees, charges and related expenses of us and our subsidiaries in connection with borrowed money (including capitalized interest) or in connection with the deferred purchase price of assets, in each case to the extent treated as interest in accordance with GAAP, paid during the 12 month period immediately preceding the date of determination. The Credit Agreement also limits our ability to, among other things, create liens, make investments, incur more indebtedness, merge or consolidate, make dispositions of property, pay dividends and make distributions to stockholders, enter into a new line of business, enter into transactions with affiliates and enter into burdensome agreements. The Credit Agreement does not limit our ability to acquire other businesses or companies except that the acquired business or company must be in our line of business, we must be in compliance with the financial covenants on a pro forma basis after taking into account the acquisition, and, if the acquired business is a separate subsidiary, in certain circumstances the lenders will receive the benefit of a guaranty of the subsidiary and liens on its assets and a pledge of its stock.
 
As of May 31, 2016, the Company was in compliance with the terms of the Credit Agreement, and has undertaken to continuously monitor compliance with these covenants.
 
Liquidity and Capital Resources Outlook
 
Future Sources of Cash
 
We expect our future sources of cash to include cash flow generated from our operating activities and borrowings under our Credit Agreement. Our revolving credit facility is available for cash advances required for working capital and for letters of credit to support our operations. Acquisitions are funded through available cash, borrowings under the revolving credit facility and seller notes.
 
Future Uses of Cash
 
We expect our future uses of cash will primarily be for acquisitions, international expansion, purchases or manufacture of field testing equipment to support growth, additional investments in technology and software products and the replacement of existing assets and equipment used in our operations. We often make purchases to support new sources of revenues, particularly in our Services segment. In addition, we will need to fund a certain amount of replacement equipment, including our fleet vehicles. We historically spend approximately 2% to 4% of our total revenues on capital expenditures, excluding acquisitions, and expect to fund these expenditures through a combination of cash and lease financing. Our cash capital expenditures, excluding acquisitions, for fiscal 2016, 2015 and 2014 were approximately 2%, 2%, and 3% of revenues, respectively. In addition, we expect to selectively repurchase our common stock, pursuant to the stock repurchase program of up to $50 million, that was approved by the Company's Board of Directors during fiscal 2016.
 
Our future acquisitions may also require capital. We acquired two companies in fiscal 2016 and four companies in fiscal 2015, with an aggregate cash outlay of $37.5 million. In some cases, additional equipment will be needed to upgrade the capabilities of these acquired companies. In addition, our future acquisition and capital spending may increase as we pursue growth opportunities. Other investments in infrastructure, training and software may also be required to match our growth, but we plan to continue using a disciplined approach to building our business. In addition, we will use cash to fund our operating leases, capital leases, long-term debt repayments and various other obligations as they arise.
 
We also expect to use cash to support our working capital requirements for our operations, particularly in the event of further growth and due to the impacts of seasonality on our business. Our future working capital requirements will depend on many factors, including the rate of our revenue growth, our introduction of new solutions and enhancements to existing solutions and our expansion of sales and marketing and product development activities. To the extent that our cash and cash equivalents and future cash flows from operating activities are insufficient to fund our future activities, we may need to raise additional funds through bank credit arrangements, public or private equity financings, or debt financings. We also may need to raise additional funds in the event we determine in the future to effect one or more acquisitions of businesses, technologies or products that will complement our existing operations. In the event additional funding is required, we may not be able to obtain bank credit arrangements or effect an equity or debt financing on acceptable terms.

Contractual Obligations
 

41


We generally do not enter into long-term minimum purchase commitments. Our principal commitments, in addition to those related to our long-term debt discussed below, consist of obligations under facility leases for office space and equipment leases and contingent consideration obligations in connection with our acquisitions.
 
The following table summarizes our outstanding contractual obligations as of May 31, 2016:
 
($ in thousands) 
 
Total
 
Fiscal 2017
 
Fiscal 2018
 
Fiscal 2019
 
Fiscal 2020
 
Fiscal 2021
 
2022 & Beyond
Long-term debt (1) 
 
$
85,009

 
$
12,553

 
$
881

 
$
751

 
$
69,446

 
$
294

 
$
1,084

Capital lease obligations (2) 
 
21,189

 
9,112

 
6,491

 
3,810

 
1,520

 
134

 
122

Operating lease obligations
 
46,809

 
9,956

 
7,903

 
6,580

 
5,219

 
4,112

 
13,039

Contingent consideration obligations (3)
 
2,075

 
1,029

 
933

 
104

 
9

 

 

Total
 
$
155,082

 
$
32,650

 
$
16,208

 
$
11,245

 
$
76,194

 
$
4,540

 
$
14,245

________________________________

(1)
Consists primarily of borrowings from our senior credit facility and seller notes payable in connection with our acquisitions and includes the current portion outstanding.

(2)
Includes estimated cash interest to be paid over the remaining terms of the leases.

(3)
Consists of payments deemed reasonably likely to occur in connection with our acquisitions

Off-Balance Sheet Arrangements
 
During fiscal 2016, 2015 and 2014, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.
 
Critical Accounting Policies and Estimates
 
The preparation of financial statements in accordance with generally accepted accounting principles requires that we make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of financial statements and the reported amounts of revenues and expenses during the reporting period. The accounting policies that we believe require more significant estimates and assumptions include: revenue recognition, valuations of accounts receivable, long-lived assets, goodwill, and deferred tax assets and uncertain tax positions. We base our estimates and assumptions on historical experience, known or expected trends and various other assumptions that we believe to be reasonable. As future events and their effects cannot be determined with precision, actual results could differ significantly from these estimates, which may cause our future results to be significantly affected.
 
We believe that the following critical accounting policies comprise the more significant estimates and assumptions used in the preparation of our consolidated financial statements.
 
Revenue Recognition
 
Revenue is generally recognized when persuasive evidence of an arrangement exists, services have been rendered or products have been delivered, the fee is fixed or determinable, and collectability is reasonably assured, as summarized below.
 
Services
 
Revenue is primarily derived from providing services on a time and material basis. Service arrangements generally consist of inspection professionals working under contract for a fixed period of time or on a specific customer project.  Revenue is generally recognized when the service is performed in accordance with terms of each customer arrangement, upon completion of the earnings process and when collection is reasonably assured.  At the end of any reporting period, revenue is accrued for services that have been earned which have not yet been billed. Reimbursable costs, including those related to travel and out-of-pocket expenses, are included in revenue, and equivalent amounts of reimbursable costs are included in cost of services.
 

42


Products and Systems
 
Sales of products and systems are recorded when the sales price is fixed and determinable and the risks and rewards of ownership are transferred (generally upon shipment) and when collectability is reasonably assured.

These arrangements occasionally contain multiple elements or deliverables, such as hardware, software (that is essential to the functionality of the hardware) and related services. We recognize revenue for delivered elements as separate units of accounting, when the delivered elements have standalone value, uncertainties regarding customer acceptance are resolved and there are no refund or return rights for the delivered elements. We establish the selling prices for each deliverable based on our vendor-specific objective evidence (“VSOE”), if available, third-party evidence, if VSOE is not available, or estimated selling price (“ESP”) if neither VSOE nor third-party evidence is available. We establish VSOE of selling price using the price charged for a deliverable when sold separately and, in rare instances, using the price established by management having the relevant authority. Third-party evidence of selling price is established by evaluating largely similar and interchangeable competitor products or services in standalone sales to similarly situated customers. We determine ESP by considering internal factors such as margin objectives, pricing practices and controls, customer segment pricing strategies and the product life cycle. Consideration is also given to market conditions such as competitor pricing strategies and industry technology life cycles. When determining ESP, we apply management judgment to establish margin objectives and pricing strategies and to evaluate market conditions and product life cycles. Changes in the aforementioned factors may result in a different allocation of revenue to the deliverables in multiple element arrangements and therefore may change the pattern and timing of revenue recognition for these elements, but will not change the total revenue recognized for the arrangement.
 
A portion of our revenue is generated from engineering and manufacturing of custom products under long-term contracts that may last from several months to several years, depending on the contract. Revenues from long-term contracts are recognized on the percentage-of-completion method of accounting. Under the percentage-of-completion method of accounting revenues are recognized as work is performed. The percentage of completion at any point in time is generally based on total costs or total labor dollars incurred to date in relation to the total estimated costs or total labor dollars estimated at completion. The percentage of completion is then applied to the total contract revenue to determine the amount of revenue to be recognized in the period. Application of the percentage-of-completion method of accounting requires the use of estimates of costs to be incurred for the performance of the contract. Contract costs include all direct materials, direct labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs, and all costs associated with operation of equipment. The cost estimation process is based upon the professional knowledge and experience of our engineers, project managers and financial professionals. Factors that are considered in estimating the work to be completed include the availability and productivity of labor, the nature and complexity of the work to be performed, the effect of change orders, the availability of materials, the effect of any delays in our project performance and the recoverability of any claims. Whenever revisions of estimated contract costs and contract values indicate that the contract costs will exceed estimated revenues, thus creating a loss, a provision for the total estimated loss is recorded in that period.
 
Long-Lived Assets
 
We perform a review of long-lived assets for impairment when events or changes in circumstances indicate the carrying value of such assets may not be recoverable. If an indication of impairment is present, we compare the estimated undiscounted future cash flows to be generated by the asset to its carrying amount. If the undiscounted future cash flows are less than the carrying amount of the asset, we record an impairment loss equal to the excess of the asset’s carrying amount over its fair value. We estimate fair value based on valuation techniques such as a discounted cash flow analysis or a comparison to fair values of similar assets. As of May 31, 2016 and 2015, we had $78.7 million and $79.3 million in net property, plant and equipment, respectively, and $43.5 million and $51.3 million in intangible assets, net, respectively. There were no long-lived asset impairment charges recorded during the years ended May 31, 2016, 2015 or 2014.
 
Long-lived assets, net, outside of the U.S. totaled $104.8 million and $105.9 million as of May 31, 2016 and 2015, respectively.
 
Goodwill

Goodwill represents the excess purchase price of acquired businesses over the fair values attributed to underlying net tangible assets and identifiable intangible assets. We test the carrying value of goodwill for impairment at a “reporting unit” level (which for the Company is represented by (i) our Services segment, (ii) our Products and Systems segment, and (iii) the European component and (iv) Brazilian component of our International segment), using a qualitative assessment for its Services reporting unit and a two-step approach for its remaining reporting units, annually as of March 1, or whenever an event occurs or circumstances change that would more likely than not reduce the fair value of a reporting unit below its carrying amount. If the fair value of a reporting unit is less than its carrying value, this is an indicator that the goodwill assigned to that

43


reporting unit may be impaired. In this case, a second step is performed to allocate the fair value of the reporting unit to the assets and liabilities of the reporting unit as if it had just been acquired in a business combination, and as if the purchase price was equivalent to the fair value of the reporting unit. The excess of the fair value of the reporting unit over the amounts assigned to its assets and liabilities is referred to as the implied fair value of goodwill. The implied fair value of the reporting unit’s goodwill is then compared to the actual carrying value of goodwill. If the implied fair value is less than the carrying value, an impairment loss would be recorded to reduce the carrying value of goodwill to its implied fair value. We consider the income and market approaches to estimating the fair value of our reporting units, which requires significant judgment in evaluation of economic and industry trends, estimated future cash flows, discount rates and other factors. The Company believes that the fair values of each of its reporting units are substantially in excess of their respective carrying amounts.

Significant deterioration in industry or economic trends, disruptions to our business, inability to effectively integrate acquired businesses, or other factors, may cause these fair value to decline, possibly resulting in impairment charges to goodwill in future periods.
 

 
Recent Accounting Pronouncements
 
In May 2014, the Financial Accounting Standards Board ("FASB") issued ASU No. 2014-09, Revenue from Contracts with Customers, which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The ASU will replace most existing revenue recognition guidance in U.S. GAAP when it becomes effective. The new standard is effective for fiscal years and interim periods within those fiscal years beginning December 15, 2017, as a result of a one year deferral in the standard issued by the FASB in August 2015 with ASU 2015-14, Revenue from Contracts with Customers - Deferral of the Effective Date. Early application is not permitted. The standard permits the use of either the retrospective or cumulative effect transition method. The Company is evaluating the effect that ASU 2014-09 will have on its consolidated financial statements and related disclosures.

In September 2015, the FASB issued ASU No. 2015-16, Business Combinations (Topic 805): Simplifying the Accounting for Measurement-Period Adjustments. This amendment will simplify the accounting for adjustments made to provisional amounts recognized in a business combination and eliminates the requirement to retrospectively account for those adjustments in previous reporting periods. This update will require on the face of the income statement or in the notes to the financial statements the amount recorded in current-period earnings that would have previously been recorded if the adjustment to the provisional amounts had been recognized as of the acquisition date. ASU 2015-16 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2015. This update should be applied prospectively and earlier adoption is permitted for financial statements that have not been issued. The Company is evaluating the effect that ASU 2015-16 will have on its consolidated financial statements and related disclosures.

In November 2015, the FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes. This amendment will simplify the presentation of deferred tax assets and liabilities on the balance sheet and require all deferred tax assets and liabilities to be treated as non-current. ASU 2015-17 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2016, with early adoption permitted. The Company is evaluating the effect that ASU 2015-17 will have on its consolidated financial statements and related disclosures.

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842). This amendment supersedes previous accounting guidance (Topic 840) and requires all leases, with exception of leases with a term of 12 months or less, to be recorded on the balance sheet as lease assets and lease liabilities. ASU 2016-02 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2018, with early adoption permitted. The standard requires lessees and lessors to recognize and measure leases at the beginning of the earliest period presented using a modified retrospective approach. The Company is evaluating the effect that ASU 2016-02 will have on its consolidated financial statements and related disclosures.

In March 2016, the FASB issues ASU No. 2016-09, Stock Compensation (Topic 718). This amendment will simplify certain aspects of accounting for share-based payment transactions, which include accounting for income taxes and the related impact on the statement of cash flows, an option to account for forfeitures when they occur in addition to the existing guidance to estimate the forfeitures of awards, classification of awards as either equity or liabilities and classification on the statement of cash flows for employee taxes paid to tax authorities on shares withheld for vesting. ASU 2016-09 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2016, with early adoption permitted. The Company is evaluating the effect that ASU 2016-09 will have on its consolidated financial statements and related disclosures.
 

44





ITEM 7A.                                       Quantitative and Qualitative Disclosures About Market Risk
 
Interest Rate Sensitivity
 
The company’s investment portfolio primarily includes cash equivalents for which the market values are not significantly affected by changes in interest rates. Our interest rate risk results primarily from our variable rate indebtedness under our credit facility, which is influenced by movements in short-term rates. Borrowings under our $175.0 million revolving credit facility are based on an LIBOR, plus an additional margin based on our Funded Debt Leverage Ratio. Based on the amount of variable rate debt, $69.0 million at May 31, 2016, an increase in interest rates by one hundred basis points from our current rate would increase annual interest expense by approximately $0.7 million.
 
Foreign Currency Risk
 
We have foreign currency exposure related to our operations in foreign locations. This foreign currency exposure, particularly the Euro, British Pound Sterling, Brazilian Real, Canadian Dollar and the Indian Rupee, arises primarily from the translation of our foreign subsidiaries’ financial statements into U.S. Dollars. For example, a portion of our annual sales and operating costs are denominated in British Pound Sterling and we have exposure related to sales and operating costs increasing or decreasing based on changes in currency exchange rates. If the U.S. Dollar increases in value against these foreign currencies, the value in U.S. Dollars of the assets and liabilities originally recorded in these foreign currencies will decrease. Conversely, if the U.S. Dollar decreases in value against these foreign currencies, the value in U.S. Dollars of the assets and liabilities originally recorded in these foreign currencies will increase. Thus, increases and decreases in the value of the U.S. Dollar relative to these foreign currencies have a direct impact on the value in U.S. Dollars of our foreign currency denominated assets and liabilities, even if the value of these items has not changed in their original currency. We do not currently enter into forward exchange contracts to hedge exposures denominated in foreign currencies. An unfavorable 10% change in the average U.S. Dollar exchange rates for fiscal 2016 would cause a decrease in consolidated operating income of approximately $1.1 million and a favorable 10% change would cause an increase of approximately $1.3 million. We may consider entering into hedging or forward exchange contracts in the future, as sales in international currencies increase due to growth in our International segment.
 
Fair Value of Financial Instruments

We do not have material exposure to market risk with respect to investments, as our investments consist primarily of highly liquid investments purchased with a remaining maturity of three months or less. We do not use derivative financial instruments for speculative or trading purposes; however, this does not preclude our adoption of specific hedging strategies in the future.
 
Effects of Inflation and Changing Prices
 
Our results of operations and financial condition have not been significantly affected by inflation and changing prices.


45


ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
 
Report of Independent Registered Public Accounting Firm
 
The Board of Directors and Stockholders
Mistras Group, Inc.:
 
We have audited the accompanying consolidated balance sheets of Mistras Group, Inc. and subsidiaries (the Company) as of May 31, 2016 and 2015, and the related consolidated statements of income, comprehensive income (loss), equity, and cash flows for each of the years in the three-year period ended May 31, 2016. We also have audited the Company’s internal control over financial reporting as of May 31, 2016, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on these consolidated financial statements and an opinion on the Company’s internal control over financial reporting based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the consolidated financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Mistras Group, Inc. and subsidiaries as of May 31, 2016 and 2015, and the results of their operations and their cash flows for each of the years in the three-year period ended May 31, 2016, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of May 31, 2016, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

 
/s/ KPMG LLP
New York, New York
August 15, 2016


46


Mistras Group, Inc. and Subsidiaries
Consolidated Balance Sheets
(in thousands, except share and per share data)
 
 
May 31,
 
2016
 
2015
ASSETS
 

 
 

Current Assets
 

 
 

Cash and cash equivalents
$
21,188

 
$
10,555

Accounts receivable, net
137,913

 
133,228

Inventories
9,918

 
10,841

Deferred income taxes
6,216

 
5,144

Prepaid expenses and other current assets
12,711

 
11,698

Total current assets
187,946

 
171,466

Property, plant and equipment, net
78,676

 
79,256

Intangible assets, net
43,492

 
51,276

Goodwill
169,220

 
166,414

Deferred income taxes
1,000

 
1,208

Other assets
2,341

 
2,107

Total Assets
$
482,675

 
$
471,727

 
 
 
 
LIABILITIES AND EQUITY
 

 
 

Current Liabilities
 

 
 

Accounts payable
$
10,796

 
$
10,529

Accrued expenses and other current liabilities
62,983

 
55,914

Current portion of long-term debt
12,553

 
17,902

Current portion of capital lease obligations
7,835

 
8,646

Income taxes payable
2,710

 
532

Total current liabilities
96,877

 
93,523

Long-term debt, net of current portion
72,456

 
95,557

Obligations under capital leases, net of current portion
11,932

 
10,717

Deferred income taxes
18,328

 
16,984

Other long-term liabilities
6,794

 
9,934

Total Liabilities
206,387

 
226,715

 
 
 
 
Commitments and contingencies

 


 
 
 
 
Equity
 

 
 

Preferred stock, 10,000,000 shares authorized

 

Common stock, $0.01 par value, 200,000,000 shares authorized, 28,939,993 and 28,703,320 shares issued and outstanding as of May 31, 2016 and May 31, 2015, respectively
290

 
287

Additional paid-in capital
213,737

 
208,064

Retained earnings
82,235

 
57,581

Accumulated other comprehensive loss
(20,099
)
 
(21,113
)
Total Mistras Group, Inc. stockholders’ equity
276,163

 
244,819

Noncontrolling interests
125

 
193

Total Equity
276,288

 
245,012

Total Liabilities and Equity
$
482,675

 
$
471,727

 
The accompanying notes are an integral part of these consolidated financial statements.

47


Mistras Group, Inc. and Subsidiaries
Consolidated Statements of Income
(in thousands, except per share data)
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
 
 

 
 

 
 

Revenue
$
719,181

 
$
711,252

 
$
623,447

Cost of revenue
494,911

 
506,281

 
432,695

Depreciation
21,262

 
20,238

 
17,809

Gross profit
203,008

 
184,733

 
172,943

Selling, general and administrative expenses
141,229

 
143,978

 
123,690

Research and engineering
2,523

 
2,521

 
2,995

Depreciation and amortization
11,212

 
13,048

 
10,620

Acquisition-related (benefit) expense, net
(1,453
)
 
(5,167
)
 
(2,657
)
Legal settlement
6,320

 

 

Income from operations
43,177

 
30,353

 
38,295

Interest expense
4,762

 
4,622

 
3,192

Income before provision for income taxes
38,415

 
25,731

 
35,103

Provision for income taxes
13,765

 
9,740

 
12,528

Net income
24,650

 
15,991

 
22,575

Less: net (loss) income attributable to noncontrolling interests, net of taxes
(4
)
 
(90
)
 
57

Net income attributable to Mistras Group, Inc.
$
24,654

 
$
16,081

 
$
22,518

Earnings per common share
 

 
 

 
 

Basic
$
0.85

 
$
0.56

 
$
0.79

Diluted
$
0.82

 
$
0.54

 
$
0.77

Weighted average common shares outstanding:
 

 
 

 
 

Basic
28,856

 
28,613

 
28,365

Diluted
29,891

 
29,590

 
29,324

 
The accompanying notes are an integral part of these consolidated financial statements.


48


Mistras Group, Inc. and Subsidiaries
Consolidated Statements of Comprehensive Income (Loss)
(in thousands)
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Net income
$
24,650

 
$
15,991

 
$
22,575

 
 
 
 
 
 
Other comprehensive income (loss):
 

 
 

 
 

Foreign currency translation adjustments
1,014

 
(19,602
)
 
2,941

Comprehensive income (loss)
25,664

 
(3,611
)
 
25,516

Less: net (loss) income attributable to noncontrolling interests
(4
)
 
(90
)
 
57

Foreign currency translation adjustments attributable to noncontrolling interests
1

 
5

 
(4
)
Comprehensive income (loss) attributable to Mistras Group, Inc.
$
25,669

 
$
(3,516
)
 
$
25,455

 
The accompanying notes are an integral part of these consolidated financial statements.


49


Mistras Group, Inc. and Subsidiaries
Consolidated Statements of Equity
(in thousands)
 
 
Common Stock
 
Additional
paid-in capital
 
Retained
earnings

 
Accumulated
other
comprehensive income (loss)
 
Total
Mistras Group,
Inc.
Stockholders’ Equity
 
Noncontrolling Interest
 
 
 
Shares
 
Amount
 
 
 
 
 
 
Total Equity
Balance at May 31, 2013
28,211

 
$
282

 
$
195,241

 
$
18,982

 
$
(4,452
)
 
$
210,053

 
$
227

 
$
210,280

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Net income

 

 

 
22,518

 

 
22,518

 
57

 
22,575

Other comprehensive income, net of tax

 

 

 

 
2,941

 
2,941

 
4

 
2,945

Share-based payments
19

 

 
6,261

 

 

 
6,261

 

 
6,261

Net settlement on vesting of restricted stock units
123

 
1

 
(1,007
)
 

 
 

 
(1,006
)
 

 
(1,006
)
Excess tax benefit from share-based payment compensation

 

 
340

 

 

 
340

 

 
340

Exercise of stock options
103

 
1

 
996

 

 

 
997

 

 
997

Balance at May 31, 2014
28,456

 
$
284

 
$
201,831

 
$
41,500

 
$
(1,511
)
 
$
242,104

 
$
288

 
$
242,392

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Net income

 

 

 
16,081

 

 
16,081

 
(90
)
 
15,991

Other comprehensive loss, net of tax

 

 

 

 
(19,602
)
 
(19,602
)
 
(5
)
 
(19,607
)
Share-based payments
21

 

 
6,579

 

 

 
6,579

 

 
6,579

Net settlement on vesting of restricted stock units
161

 
2

 
(1,483
)
 

 

 
(1,481
)
 

 
(1,481
)
Excess tax benefit from share-based payment compensation

 

 
388

 

 

 
388

 

 
388

Exercise of stock options
65

 
1

 
749

 

 

 
750

 

 
750

Balance at May 31, 2015
28,703

 
$
287

 
$
208,064

 
$
57,581

 
$
(21,113
)
 
$
244,819

 
$
193

 
$
245,012

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Net income

 

 

 
24,654

 

 
24,654

 
(4
)
 
24,650

Other comprehensive income, net of tax

 

 

 

 
1,014

 
1,014

 
(64
)
 
950

Share-based payments

 

 
6,394

 

 

 
6,394

 

 
6,394

Net settlement on vesting of restricted stock units
182

 
2

 
(1,093
)
 

 

 
(1,091
)
 

 
(1,091
)
Excess tax benefit from share-based payment compensation

 

 
(170
)
 

 

 
(170
)
 

 
(170
)
Exercise of stock options
55

 
1

 
542

 

 

 
543

 

 
543

Balance at May 31, 2016
28,940

 
$
290

 
$
213,737

 
$
82,235

 
$
(20,099
)
 
$
276,163

 
$
125

 
$
276,288

 
The accompanying notes are an integral part of these consolidated financial statements.


50


Mistras Group, Inc. and Subsidiaries
Consolidated Statements of Cash Flows
(in thousands)
 
For the year ended May 31,
 
2016
 
2015
 
2014
 
 
 
Note 1
 
 
Cash flows from operating activities
 

 
 

 
 

Net income
$
24,650

 
$
15,991

 
$
22,575

Adjustments to reconcile net income to net cash provided by operating activities
 

 
 

 
 

Depreciation and amortization
32,474

 
33,286

 
28,429

Deferred income taxes
240

 
(1,745
)
 
(621
)
Share-based compensation expense
6,514

 
6,579

 
6,261

Charges associated with the exit of foreign operations

 
2,516

 

Fair value adjustments to contingent consideration
(2,066
)
 
(5,382
)
 
(3,937
)
Other
(1,052
)
 
1,647

 
617

Changes in operating assets and liabilities, net of effect of acquisitions
 

 
 

 
 

Accounts receivable
(4,999
)
 
3,982

 
(23,857
)
Inventories
1,595

 
388

 
1,203

Prepaid expenses and other current assets
(1,128
)
 
(288
)
 
(4,059
)
Other assets
(684
)
 
(821
)
 
36

Accounts payable
254

 
(6,571
)
 
6,125

Accrued expenses and other liabilities
10,187

 
2,006

 
4,532

Income taxes payable
2,139

 
(1,748
)
 
(431
)
Net cash provided by operating activities
68,124

 
49,840

 
36,873

Cash flows from investing activities
 

 
 

 
 

Purchase of property, plant and equipment
(14,864
)
 
(15,104
)
 
(16,871
)
Purchase of intangible assets
(1,315
)
 
(866
)
 
(708
)
Acquisition of businesses, net of cash acquired
(1,743
)
 
(34,677
)
 
(21,924
)
Proceeds from sale of equipment
1,170

 
996

 
1,498

Net cash used in investing activities
(16,752
)
 
(49,651
)
 
(38,005
)
Cash flows from financing activities
 

 
 

 
 

Repayment of capital lease obligations
(7,870
)
 
(8,653
)
 
(8,139
)
Proceeds from borrowings of long-term debt
2,737

 
2,232

 

Repayment of long-term debt
(17,580
)
 
(11,457
)
 
(8,830
)
Proceeds from revolver
55,800

 
110,300

 
102,880

Repayments of revolver
(69,600
)
 
(86,800
)
 
(81,300
)
Payment of contingent consideration for business acquisitions
(3,147
)
 
(3,213
)
 
(1,678
)
Taxes paid related to net share settlement of equity awards
(1,091
)
 
(1,481
)
 
(1,007
)
Excess tax benefit from share-based payment compensation
(170
)
 
388

 
340

Proceeds from the exercise of stock options
543

 
750

 
996

Net cash (used in) provided by financing activities
(40,378
)
 
2,066

 
3,262

Effect of exchange rate changes on cash and cash equivalents
(361
)
 
(1,720
)
 
88

Net change in cash and cash equivalents
10,633

 
535

 
2,218

Cash and cash equivalents:
 

 
 

 
 

Beginning of period
10,555

 
10,020

 
7,802

End of period
$
21,188

 
$
10,555

 
$
10,020

Supplemental disclosure of cash paid
 

 
 

 
 

Interest
$
4,151

 
$
4,504

 
$
3,271

Income taxes
$
10,686

 
$
13,243

 
$
12,920

Noncash investing and financing
 

 
 

 
 

Equipment acquired through capital lease obligations
$
8,248

 
$
8,031

 
$
11,031

Issuance of notes payable and other debt obligations primarily related to acquisitions
$

 
$
20,480

 
$
336

 
The accompanying notes are an integral part of these consolidated financial statements.

51


Mistras Group, Inc. and Subsidiaries
Notes to Consolidated Financial Statements
(tabular dollars in thousands, except share and per share data)
 
1. Description of Business and Basis of Presentation
 
Description of Business
 
Mistras Group, Inc. and subsidiaries (the Company) is a leading “one source” global provider of technology-enabled asset protection solutions used to evaluate the structural integrity and reliability of critical energy, industrial and public infrastructure. The Company combines industry-leading products and technologies, expertise in mechanical integrity (MI) and non-destructive testing (NDT) services and proprietary data analysis software to deliver a comprehensive portfolio of customized solutions, ranging from routine inspections to complex, plant-wide asset integrity assessments and management. These mission critical solutions enhance customers’ ability to extend the useful life of their assets, increase productivity, minimize repair costs, comply with governmental safety and environmental regulations, manage risk and avoid catastrophic disasters. The Company serves a global customer base of companies with asset-intensive infrastructure, including companies in the oil and gas, fossil and nuclear power, alternative and renewable energy, public infrastructure, chemicals, commercial aerospace and defense, transportation, primary metals and metalworking, pharmaceutical/biotechnology and food processing industries and research and engineering institutions.
 
Principles of Consolidation
 
The accompanying audited consolidated financial statements include the accounts of Mistras Group, Inc. and its wholly and majority-owned subsidiaries. For subsidiaries in which the Company’s ownership interest is less than 100%, the noncontrolling interests are reported in stockholders’ equity in the accompanying consolidated balance sheets. The noncontrolling interests in net income, net of tax, is classified separately in the accompanying consolidated statements of income.
 
All significant intercompany accounts and transactions have been eliminated in consolidation. Mistras Group, Inc.’s and its subsidiaries’ fiscal years end on May 31 except for the subsidiaries in the International segment, which end on April 30. Accordingly, the Company’s International segment subsidiaries are consolidated on a one-month lag. Therefore, in the quarter and year of acquisition, results of acquired subsidiaries in the International segment are generally included in consolidated results for one less month than the actual number of months from the acquisition date to the end of the reporting period. Management does not believe that any events occurred during the one-month lag period that would have a material effect on the Company’s consolidated financial statements for fiscal 2016. As discussed in Note 7 - Acquisitions and Dispositions, during the lag period in fiscal 2015, the Company sold an international subsidiary, and decided to sell two additional international subsidiaries. Management does not believe that any additional events occurred during the fiscal 2015 one-month lag period that would have a material effect on the Company’s consolidated financial statements. Reference to a fiscal year means the fiscal year ended May 31.

Reclassifications

Certain amounts in prior periods have been reclassified to conform to the current year presentation. Such reclassifications did not have a material effect on the Company's financial condition or results of operations as previously reported.
 
Immaterial Correction

Subsequent to the issuance of its consolidated financial statements as of and for the year ended May 31, 2015, the Company identified errors related to the classification of amounts reported in the Consolidated Statement of Cash Flows for that period. In accordance with the SEC Staff Accounting Bulletin (SAB) No. 99, Materiality, and SAB No. 108, Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements, management evaluated the materiality of the errors from qualitative and quantitative perspectives, and concluded that the errors were immaterial. Accordingly, management has corrected the presentation of the affected line items of the accompanying Consolidated Statement of Cash Flows for the year ended May 31, 2015, as summarized below. These changes did not impact the Company’s net income, balance sheet, or stockholders’ equity for any periods previously reported.


52


 
 
Previously Reported
 
Revised
Cash flows from operating activities
 
 
 
 
Accounts payable
 
(6,281
)
 
(6,571
)
Accrued expenses and other liabilities
 
2,500

 
2,006

Net cash provided by operating activities
 
50,624

 
49,840

 
 
 
 
 
Cash flows from investing activities
 
 
 
 
Acquisition of businesses, net of cash acquired
 
(34,967
)
 
(34,677
)
Net cash used in investing activities
 
(49,941
)
 
(49,651
)
 
 
 
 
 
Cash flows from financing activities
 
 
 
 
Proceeds from borrowings of long-term debt
 

 
2,232

Repayments of long-term debt
 
(9,224
)
 
(11,457
)
Net borrowings against revolver
 
21,914

 
23,500

Net cash provided by financing activities
 
481

 
2,066

 
 
 
 
 
Effect of exchange rate changes on cash and cash equivalents
 
(629
)
 
(1,720
)

 
2. Summary of Significant Accounting Policies
 
Revenue Recognition
 
Revenue is generally recognized when persuasive evidence of an arrangement exists, services have been rendered or products have been delivered, the fee is fixed or determinable, and collectability is reasonably assured. Shipping and handling costs are included in cost of revenues. Taxes collected from customers and remitted to governmental authorities are presented in the consolidated statements of income on a net basis. One customer accounted for 10% of our revenues in fiscal 2016, which primarily were generated from the Services segment. No customer accounted for 10% or more of our revenues in fiscal 2015 and 2014. The following revenue recognition policies define the manner in which we account for specific transaction types:
 
Services
 
Revenue is primarily derived from providing services on a time and material basis.  Service arrangements generally consist of inspection professionals working under contract for a fixed period of time or on a specific customer project. Revenue is generally recognized when the service is performed in accordance with terms of each customer arrangement, upon completion of the earnings process and when collection is reasonably assured. At the end of any reporting period, revenue is accrued for services that have been earned which have not yet been billed. Reimbursable costs, including those related to travel and out-of-pocket expenses, are included in revenue, and equivalent amounts of reimbursable costs are included in cost of services.
 
Products and Systems
 
Sales of products and systems are recorded when the sales price is fixed and determinable and the risks and rewards of ownership are transferred (generally upon shipment) and when collectability is reasonably assured.
 
These arrangements occasionally contain multiple elements or deliverables, such as hardware, software (that is essential to the functionality of the hardware) and related services. The Company recognizes revenue for delivered elements as separate units of accounting, when the delivered elements have standalone value, uncertainties regarding customer acceptance are resolved and there are no refund or return rights for the delivered elements. The Company establishes the selling prices for each deliverable based on its, vendor-specific objective evidence (“VSOE”), if available, third-party evidence, if VSOE is not available, or estimated selling price (“ESP”) if neither VSOE nor third-party evidence is available. The Company establishes VSOE of selling price using the price charged for a deliverable when sold separately and, in rare instances, using the price established by management having the relevant authority. Third-party evidence of selling price is established by evaluating largely similar and interchangeable competitor products or services in standalone sales to similarly situated customers. The Company determines ESP, by considering Internal factors such as margin objectives, pricing practices and controls, customer segment pricing strategies and the product life cycle. Consideration is also given to market conditions such as competitor pricing strategies and Industry technology life cycles. When determining ESP, the Company applies management judgment to

53


establish margin objectives and pricing strategies and to evaluate market conditions and product life cycles. Changes in the aforementioned factors may result in a different allocation of revenue to the deliverables in multiple element arrangements and therefore may change the pattern and timing of revenue recognition for these elements, but will not change the total revenue recognized for the arrangement.
 
A portion of the Company’s revenue is generated from engineering and manufacturing of custom products under long-term contracts that may last from several months to several years, depending on the contract. Revenues from long-term contracts are recognized on the percentage-of-completion method of accounting. Under the percentage-of-completion method of accounting revenues are recognized as work is performed. The percentage of completion at any point in time is generally based on total costs or total labor dollars incurred to date in relation to the total estimated costs or total labor dollars estimated at completion. The percentage of completion is then applied to the total contract revenue to determine the amount of revenue to be recognized in the period. Application of the percentage-of-completion method of accounting requires the use of estimates of costs to be incurred for the performance of the contract. Contract costs include all direct materials, direct labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs, and all costs associated with operation of equipment. The cost estimation process is based upon the professional knowledge and experience of our engineers, project managers and financial professionals. Factors that are considered in estimating the work to be completed include the availability and productivity of labor, the nature and complexity of the work to be performed, the effect of change orders, the availability of materials, the effect of any delays in our project performance and the recoverability of any claims. Whenever revisions of estimated contract costs and contract values indicate that the contract costs will exceed estimated revenues, thus creating a loss, a provision for the total estimated loss is recorded in that period.
 
Use of Estimates
 
The preparation of financial statements in accordance with generally accepted accounting principles requires that the Company make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses and disclosure of contingent assets and liabilities at the date of financial statements. The accounting policies that the Company believes require more significant estimates and assumptions include: revenue recognition, valuations of accounts receivable, long lived assets, goodwill, and deferred tax assets and uncertain tax positions. The Company bases its estimates and assumptions on historical experience, known or expected trends and various other assumptions that it believes to be reasonable. As future events and their effects cannot be determined with precision, actual results could differ significantly from these estimates, which may cause the Company’s future results to be significantly affected.
 
Cash and Cash Equivalents
 
The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents.
 
Accounts Receivable
 
Accounts receivable are stated net of an allowance for doubtful accounts and sales allowances. Outstanding accounts receivable balances are reviewed periodically, and allowances are provided at such time that management believes it is probable that such balances will not be collected within a reasonable period of time. The Company extends credit to its customers based upon credit evaluations in the normal course of business, primarily with 30-day terms. Bad debts are provided for based on historical experience and management’s evaluation of outstanding accounts receivable. Accounts are generally written off when they are deemed uncollectible. One customer accounted for 11% of our accounts receivable in fiscal 2016. No customer accounted for 10% or more of our accounts receivable in fiscal 2015.
 
Inventories
 
Inventories are stated at the lower of cost, as determined by using the first-in, first-out method, or market. Work in process and finished goods inventory include material, direct labor, variable costs and overhead.
 
Purchased and Internal-Use Software
 
The Company capitalizes certain costs that are incurred to purchase or to create and implement internal-use software, which includes software coding, installation and testing. Capitalized costs are amortized on a straight-line basis over three years, the estimated useful life of the software.
 
Property, Plant and Equipment

54


 
Property, plant and equipment are recorded at cost. Depreciation of property, plant and equipment is computed utilizing the straight-line method over the estimated useful lives of the assets. Amortization of leasehold improvements is computed utilizing the straight-line method over the shorter of the remaining lease term or estimated useful life. Repairs and maintenance costs are expensed as incurred.
 
Goodwill
 
Goodwill represents the excess purchase price of acquired businesses over the fair values attributed to underlying net tangible assets and identifiable intangible assets. The Company tests the carrying value of goodwill for impairment at a “reporting unit” level (which for the Company is represented by (i) our Services segment, (ii) our Products and Systems segment, and (iii) the European component and (iv) Brazilian component of our International segment), using a qualitative assessment for its Services reporting unit and a two-step approach for its remaining reporting units, annually as of March 1, or whenever an event occurs or circumstances change that would more likely than not reduce the fair value of a reporting unit below its carrying amount. If the fair value of a reporting unit is less than its carrying value, this is an indicator that the goodwill assigned to that reporting unit may be impaired. In this case, a second step is performed to allocate the fair value of the reporting unit to the assets and liabilities of the reporting unit as if it had just been acquired in a business combination, and as if the purchase price was equivalent to the fair value of the reporting unit. The excess of the fair value of the reporting unit over the amounts assigned to its assets and liabilities is referred to as the implied fair value of goodwill. The implied fair value of the reporting unit’s goodwill is then compared to the actual carrying value of goodwill. If the implied fair value is less than the carrying value, an impairment loss would be recorded to reduce the carrying value of goodwill to its implied fair value. The Company considers the income and market approaches to estimating the fair value of our reporting units, which requires significant judgment in evaluation of economic and industry trends, estimated future cash flows, discount rates and other factors. The Company believes that the fair values of each of its reporting units are substantially in excess of their respective carrying amounts.

Significant deterioration in industry or economic trends, disruptions to our business, inability to effectively integrate acquired businesses, or other factors, may cause these fair value to decline, possibly resulting in impairment charges to goodwill in future periods.

 
Impairment of Long-lived Assets
 
The Company reviews the recoverability of its long-lived assets on a periodic basis in order to identify indicators of a possible impairment. The assessment for potential impairment is based primarily on the Company’s ability to recover the carrying value of its long-lived assets from expected future undiscounted cash flows. If the total expected future undiscounted cash flows are less than the carrying amount of the assets, a loss is recognized for the difference between fair value (computed based upon the expected future discounted cash flows) and the carrying value of the assets.
 
Research and Engineering

Research and product development costs are expensed as incurred.

Advertising, Promotions and Marketing
 
The costs for advertising, promotion and marketing programs are expensed as incurred and are included in selling, general and administrative expenses. Advertising expense was approximately $1.8 million, $2.2 million and $1.8 million for fiscal 2016, 2015 and 2014, respectively.
 
Fair Value of Financial Instruments
 
The carrying amounts of cash and cash equivalents, accounts receivable, accounts payable and other financial current assets and liabilities approximate fair value based on the short-term nature of the items. The carrying value of long-term debt approximates fair value due to the variable-rate structure of the debt. The fair value of the Company’s notes payable and capital lease obligations approximate their carrying amounts as those obligations bear interest at rates which management believes would currently be available to the Company for similar obligations.
 
Foreign Currency Translation
 

55


The financial position and results of operations of the Company’s foreign subsidiaries are measured using their functional currencies, which, is their local currency. Assets and liabilities of foreign subsidiaries are translated into the U.S. Dollar at the exchange rates in effect at the balance sheet date. Income and expenses are translated at the average exchange rate during the period. Translation gains and losses are reported as a component of other comprehensive income (loss) for the period and included in accumulated other comprehensive income (loss) within stockholders’ equity.
 
Foreign currency (gains) and losses arising from transactions denominated in currencies other than the functional currency are included in net income, reported in SG&A expenses, and were approximately $(0.1) million, $1.5 million and $0.1 million in fiscal 2016, 2015 and 2014, respectively.
 
Concentrations of Credit Risk
 
Financial instruments that potentially subject the Company to concentrations of credit risk consist principally of cash and cash equivalents and accounts receivable. At times, cash deposits may exceed the limits insured by the Federal Deposit Insurance Corporation. The Company believes it is not exposed to any significant credit risk or risk of nonperformance of financial institutions.
 
Self-Insurance
 
The Company is self-insured for certain losses relating to workers’ compensation and health benefits claims. The Company maintains third-party excess insurance coverage for all workers compensation and health benefit claims in excess of approximately $0.3 million to reduce its exposure from such claims. Self-insured losses are accrued when it is probable that an uninsured claim has been incurred but not reported and the amount of the loss can be reasonably estimated at the balance sheet date.
 
Share-based Compensation
 
The value of services received from employees and directors in exchange for an award of an equity instrument is measured based on the grant-date fair value of the award. The computed value is recognized as a non-cash cost on a straight-line basis over the period the individual provides services, which is typically the vesting period of the award with the exception of awards containing an internal performance measure which is recognized on a straight-line basis over the vesting period subject to the probability of meeting the performance requirements and adjusted for the number of shares expected to be earned. As share-based compensation expense is based on awards ultimately expected to vest, the amount of expense has been reduced for estimated forfeitures. The cost of these awards is recorded in selling, general and administrative expense in the company’s consolidated statements of income.
 
Income Taxes
 
Income taxes are accounted for under the asset and liability method. Deferred income tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and tax credit carry-forwards. Deferred income tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred income tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. A valuation allowance is provided if it is more likely than not that some or all of a deferred income tax asset will not be realized. Financial accounting standards prescribe a minimum recognition threshold a tax position is required to meet before being recognized in the financial statements. These standards also provide guidance on de-recognition, measurement, and classification of amounts relating to uncertain tax positions, accounting for and disclosure of interest and penalties, accounting in interim periods and disclosures required. Interest and penalties related to unrecognized tax positions are recognized as incurred within “provision for income taxes” in the consolidated statements of income.

Recent Accounting Pronouncements

In May 2014, the Financial Accounting Standards Board ("FASB") issued ASU No. 2014-09, Revenue from Contracts with Customers, which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The ASU will replace most existing revenue recognition guidance in U.S. GAAP when it becomes effective. The new standard is effective for fiscal years and interim periods within those fiscal years beginning December 15, 2017, as a result of a one year deferral in the standard issued by the FASB in August 2015 with ASU 2015-14, Revenue from Contracts with Customers - Deferral of the Effective Date. Early application is not permitted. The standard

56


permits the use of either the retrospective or cumulative effect transition method. The Company is evaluating the effect that ASU 2014-09 will have on its consolidated financial statements and related disclosures.

In September 2015, the FASB issued ASU No. 2015-16, Business Combinations (Topic 805): Simplifying the Accounting for Measurement-Period Adjustments. This amendment will simplify the accounting for adjustments made to provisional amounts recognized in a business combination and eliminates the requirement to retrospectively account for those adjustments in previous reporting periods. This update will require on the face of the income statement or in the notes to the financial statements the amount recorded in current-period earnings that would have previously been recorded if the adjustment to the provisional amounts had been recognized as of the acquisition date. ASU 2015-16 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2015. This update should be applied prospectively and earlier adoption is permitted for financial statements that have not been issued. The Company is evaluating the effect that ASU 2015-16 will have on its consolidated financial statements and related disclosures.

In November 2015, the FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes. This amendment will simplify the presentation of deferred tax assets and liabilities on the balance sheet and require all deferred tax assets and liabilities to be treated as non-current. ASU 2015-17 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2016, with early adoption permitted. The Company is evaluating the effect that ASU 2015-17 will have on its consolidated financial statements and related disclosures.

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842). This amendment supersedes previous accounting guidance (Topic 840) and requires all leases, with exception of leases with a term of 12 months or less, to be recorded on the balance sheet as lease assets and lease liabilities. ASU 2016-02 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2018, with early adoption permitted. The standard requires lessees and lessors to recognize and measure leases at the beginning of the earliest period presented using a modified retrospective approach. The Company is evaluating the effect that ASU 2016-02 will have on its consolidated financial statements and related disclosures.

In March 2016, the FASB issues ASU No. 2016-09, Stock Compensation (Topic 718). This amendment will simplify certain aspects of accounting for share-based payment transactions, which include accounting for income taxes and the related impact on the statement of cash flows, an option to account for forfeitures when they occur in addition to the existing guidance to estimate the forfeitures of awards, classification of awards as either equity or liabilities and classification on the statement of cash flows for employee taxes paid to tax authorities on shares withheld for vesting. ASU 2016-09 is effective for fiscal years, and interim periods within those fiscal years beginning after December 15, 2016, with early adoption permitted. The Company is evaluating the effect that ASU 2016-09 will have on its consolidated financial statements and related disclosures.

 
3. Earnings per Share
 
Basic earnings per share is computed by dividing net income attributable to common shareholders by the weighted average number of shares outstanding during the period. Diluted earnings per share is computed by dividing net income attributable to common shareholders by the sum of (1) the weighted average number of shares of common stock outstanding during the period, and (2) the dilutive effect of assumed conversion of equity awards using the treasury stock method. With respect to the number of weighted average shares outstanding (denominator), diluted shares reflects: (i) only the exercise of options to acquire common stock to the extent that the options’ exercise prices are less than the average market price of common shares during the period and (ii) the pro forma vesting of restricted stock units.
 
The following table sets forth the computations of basic and diluted earnings per share:

57


 
For the year ended May 31,
 
2016
 
2015
 
2014
Basic earnings per share
 

 
 

 
 

Numerator:
 

 
 

 
 

Net income attributable to Mistras Group, Inc.
$
24,654

 
$
16,081

 
$
22,518

Denominator
 

 
 

 
 

Weighted average common shares outstanding
28,856

 
28,613

 
28,365

Basic earnings per share
$
0.85

 
$
0.56

 
$
0.79

 
 
 
 
 
 
Diluted earnings per share:
 

 
 

 
 

Numerator:
 

 
 

 
 

Net income attributable to Mistras Group, Inc.
$
24,654

 
$
16,081

 
$
22,518

Denominator
 

 
 

 
 

Weighted average common shares outstanding
28,856

 
28,613

 
28,365

Dilutive effect of stock options outstanding
712

 
719

 
775

Dilutive effect of restricted stock units outstanding
323

 
258

 
184

 
29,891

 
29,590

 
29,324

Diluted earnings per share
$
0.82

 
$
0.54

 
$
0.77

 
The following potential common shares were excluded from the computation of diluted earnings per share, as the effect would have been anti-dilutive:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Potential common stock attributable to stock options outstanding
5

 
6

 
5

Potential common stock attributable to performance awards outstanding
24

 
1

 
121

Total
29

 
7

 
126

 
4. Accounts Receivable, net
 
Accounts receivable consist of the following:
 
 
May 31,
 
2016
 
2015
Trade accounts receivable
$
140,820

 
$
136,208

Allowance for doubtful accounts
(2,907
)
 
(2,980
)
Accounts receivable, net
$
137,913

 
$
133,228

 
The Company had $18.8 million and $15.0 million of unbilled revenues accrued as of May 31, 2016 and 2015, respectively. Unbilled revenues as of May 31, 2016 are expected to be billed in the first quarter of fiscal 2017.
 
5. Inventories
 
Inventories consist of the following:

58


 
May 31,
 
2016
 
2015
Raw materials
$
3,827

 
$
4,194

Work in progress
1,743

 
1,604

Finished goods
2,839

 
3,178

Services-related consumable supplies
1,509

 
1,865

Inventory
$
9,918

 
$
10,841

 
6. Property, Plant and Equipment, net
 
Property, plant and equipment consist of the following:
 
 
May 31,
 
Useful Life
 
2016
 
2015
 
(Years)
 
 
 
 
Land
 
 
$
1,735

 
$
1,856

Building and improvements
30-40
 
19,364

 
17,712

Office furniture and equipment
5-8
 
8,692

 
7,934

Machinery and equipment
5-7
 
173,053

 
162,762

 
 
 
202,844

 
190,264

Accumulated depreciation and amortization
 
 
(124,168
)
 
(111,008
)
Property, plant and equipment, net
 
 
$
78,676

 
$
79,256

 
Depreciation expense was approximately $22.9 million, $22.2 million and $19.2 million for the years ended May 31, 2016, 2015 and 2014, respectively.
 
7. Acquisitions and Dispositions
 
Acquisitions

During fiscal 2016, the Company completed two acquisitions. The Company purchased a U.S.-based company that provides unmanned aerial systems and NDT services and a Canadian-based company that provides engineering and NDT services. In these acquisitions, the Company acquired 100% of the common stock of each acquiree in exchange for aggregate consideration of $1.8 million in cash and contingent consideration estimated to be $1.0 million to be earned based upon the acquired business achieving specific performance metrics over various periods during the initial four years of operations from the acquisition date. The Company accounted for these transactions in accordance with the acquisition method of accounting for business combinations. The estimated total potential contingent consideration for these acquisitions ranges from zero to $0.3 million as of May 31, 2016.

During fiscal 2015, the Company completed the acquisition of four companies. One of the acquired companies is located in the U.S. and provides maintenance and inspection services primarily on offshore platforms. This acquisition expanded the service offerings within the Services segment, allowing the Company to provide services to the upstream operations of its customers. The Company also purchased a group of asset protection businesses located in Quebec, Canada and an asset inspection business in Florida to complement service offerings within the Company’s Services segment and continue its market expansion strategy. The Company’s International Segment completed an acquisition of an asset inspection business located in the United Kingdom. In these acquisitions, the Company acquired 100% of the common stock or certain assets of each acquiree in exchange for aggregate consideration of approximately $35.8 million in cash and $20.5 million in notes payable over two years. The Company accounted for such transactions in accordance with the acquisition method of accounting for business combinations. In addition to the cash consideration related to these acquisitions, the Company accrued a liability of approximately $2.3 million, which represents the estimated fair value of contingent consideration expected to be payable in the event that the acquired companies achieve specific performance metrics during various periods over the next three years of operations. The estimated total potential contingent consideration for these acquisitions ranges from zero to $3.2 million as of May 31, 2015.


59


Assets and liabilities of the acquired businesses were included in the consolidated balance sheets as of May 31, 2016 based on their estimated fair value on the date of acquisition as determined in a purchase price allocation, using available information and making assumptions management believes are reasonable. The results of operations of each of the acquisitions completed in fiscal 2016 and 2015 are included in each respective operating segment’s results of operations from the date of acquisition. The Company’s allocation of purchase price for these acquisitions is included in the table below. The following table summarizes the estimated fair value of the assets acquired and liabilities assumed and any subsequent adjustments made during the fiscal year ended May 31, 2016:
 
2016
 
2015
Number of entities
2

 
4

 
 
 
 
Cash paid
$
1,784

 
$
35,755

Subordinated notes issued

 
20,505

Contingent consideration
991

 
2,255

Consideration paid
$
2,775

 
$
58,515

 
 
 
 
Current net assets
$
180

 
$
2,770

Debt and other long-term liabilities
(546
)
 
(5,889
)
Property, plant and equipment
485

 
7,395

Deferred tax liability
(72
)
 
(2,467
)
Intangibles

 
10,394

Goodwill
2,728

 
46,312

Net assets acquired
$
2,775

 
$
58,515

 
The amortization period for intangible assets acquired ranges from two to twelve years. The Company recorded $2.7 million and $46.3 million of goodwill in connection with its fiscal 2016 and 2015 acquisitions, respectively, reflecting the strategic fit and revenue and earnings growth potential of these businesses. The goodwill recorded in fiscal 2016 and 2015 relates primarily to the acquisition of the common stock of the acquirees, which is generally not deductible for tax purposes.
 
We are continuing our review of our fair value estimate of assets acquired and liabilities assumed for two entities acquired in fiscal 2016 disclosed above. This process will conclude as soon as we finalize information regarding facts and circumstances that existed as of the acquisition date. Goodwill for these two entities totaled $2.7 million. These measurement periods will not exceed one year from the respective acquisition dates.
 
Revenue included in the consolidated statement of operations for fiscal 2016 from these acquisitions for the period subsequent to the closing of the fiscal 2016 transactions were approximately $0.2 million. Aggregate loss from operations included in the consolidated statement of operations for fiscal 2016 from the acquisitions for the period subsequent to the closing of each transaction was approximately $0.3 million. As these acquisitions are not significant to the Company’s fiscal 2016 results, no unaudited pro forma financial information has been included in this report.

Dispositions

On May 22, 2015, the Company completed the sale of one of its Russian subsidiaries and recognized a loss of $0.4 million. On July 31, 2015, the Company completed the sale of its other subsidiary in Russia, as well as its subsidiary in Japan. For the year ended May 31, 2015, the Company recognized impairment charges of $2.1 million related to these sales. Aggregate charges associated with the exit of these three foreign operations was approximately $2.5 million and is included within selling, general and administrative expenses on the consolidated income statement for the year ended May 31, 2015. In the aggregate, the assets and liabilities of these subsidiaries represent 0.6% and 0.3% of consolidated assets and liabilities, respectively, and are included in their natural classifications on the consolidated balance sheet as of May 31, 2015.

Acquisition-Related expense
 
In the course of its acquisition activities, the Company incurs costs in connection with due diligence, professional fees, and other expenses. Additionally, the Company adjusts the fair value of acquisition-related contingent consideration liabilities on a

60


quarterly basis. These amounts are recorded as acquisition-related (benefit) expense, net, on the consolidated statements of income and were as follows for fiscal 2016, 2015 and 2014:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Due diligence, professional fees and other transaction costs
$
629

 
$
215

 
$
1,280

Adjustments to fair value of contingent consideration liabilities
$
(2,082
)
 
$
(5,382
)
 
$
(3,937
)
Acquisition-related (benefit) expense, net
$
(1,453
)
 
$
(5,167
)
 
$
(2,657
)
 
The Company’s contingent consideration liabilities are recorded on the balance sheet in accrued expenses and other liabilities.
 
8. Goodwill
 
The changes in the carrying amount of goodwill by segment is shown below:
 
Services
 
International
 
Products
 
Total
Balance at May 31, 2014
$
73,767

 
$
43,552

 
$
13,197

 
$
130,516

Goodwill acquired during the year
41,986

 
1,480

 

 
43,466

Adjustments to preliminary purchase price allocations
3,529

 
(367
)
 

 
3,162

Foreign currency translation
(2,003
)
 
(8,727
)
 

 
(10,730
)
Balance at May 31, 2015
$
117,279

 
$
35,938

 
$
13,197

 
$
166,414

Goodwill acquired (disposed) during the year
2,728

 
(374
)
 

 
2,354

Adjustments to preliminary purchase price allocations
270

 

 

 
270

Foreign currency translation
(594
)
 
776

 

 
182

Balance at May 31, 2016
$
119,683

 
$
36,340

 
$
13,197

 
$
169,220

 
The Company reviews goodwill for impairment on a reporting unit basis on March 1 of each year and whenever events or changes in circumstances indicate the carrying value of goodwill may not be recoverable. As of May 31, 2016, the Company did not identify any changes in circumstances that would indicate the carrying value of goodwill may not be recoverable.

The Company's cumulative goodwill impairment as of May 31, 2016, May 31, 2015 and May 31, 2014 was $9.9 million, which is within its International segment.

9. Intangible Assets
 
The gross carrying amount and accumulated amortization of intangible assets were as follows:
 
 
 
 
May 31,
 
 
 
2016
 
2015
 
Useful Life
(Years)
 
Gross
Amount
 
Accumulated
Amortization
 
Net
Carrying
Amount
 
Gross
Amount
 
Accumulated
Amortization
 
Net
Carrying
Amount
Customer relationships
5-12
 
$
81,262

 
$
(47,747
)
 
$
33,515

 
$
81,101

 
$
(41,009
)
 
$
40,092

Software/Technology
3-15
 
17,539

 
(11,855
)
 
5,684

 
15,738

 
(10,290
)
 
5,448

Covenants not to compete
2-5
 
10,791

 
(9,290
)
 
1,501

 
11,678

 
(8,605
)
 
3,073

Other
2-5
 
7,827

 
(5,035
)
 
2,792

 
6,910

 
(4,247
)
 
2,663

Total
 
 
$
117,419

 
$
(73,927
)
 
$
43,492

 
$
115,427

 
$
(64,151
)
 
$
51,276

 
Amortization expense for the years ended May 31, 2016, 2015 and 2014 was approximately $9.6 million, $11.1 million and $9.2 million, respectively, including amortization of software/technology for the years ended May 31, 2016, 2015 and 2014 of $1.0 million, $0.9 million and $0.9 million, respectively.
 
Amortization expense in each of the five years and thereafter subsequent to May 31, 2016 related to the Company’s intangible assets is expected to be as follows:

61


 
Expected
Amortization
Expense
 
 

2017
$
8,618

2018
7,302

2019
6,119

2020
4,495

2021
4,238

Thereafter
12,720

Total
$
43,492

 
10. Accrued Expenses and Other Current Liabilities
 
Accrued expenses and other current liabilities consist of the following:
 
 
May 31,
 
2016
 
2015
Accrued salaries, wages and related employee benefits
$
31,566

 
$
26,053

Contingent consideration
1,029

 
3,543

Accrued worker compensation and health benefits
4,834

 
3,630

Deferred revenues
3,332

 
3,841

Legal settlement accrual
6,320

 

Other accrued expenses
15,902

 
18,847

Total accrued expenses and other current liabilities
$
62,983

 
$
55,914

 
11. Long-Term Debt
 
Long-term debt consists of the following:
 
 
May 31,
 
2016
 
2015
Senior credit facility
$
68,999

 
$
83,062

Notes payable
10,111

 
24,632

Other
5,899

 
5,765

Total debt
85,009

 
113,459

Less: Current portion
(12,553
)
 
(17,902
)
Long-term debt, net of current portion
$
72,456

 
$
95,557

 
Senior Credit Facility
 
On October 31, 2014, the Company entered into a Third Amendment and Modification Agreement (the “Amendment”), of its revolving line of credit, the Third Amended and Restated Credit Agreement (“Credit Agreement”), dated December 21, 2011, with its lending group. The Amendment increased the Company’s revolving line of credit from $125.0 million to $175.0 million and provides that under certain circumstances the line of credit can be increased to $225.0 million. The Company may continue to borrow up to $30.0 million in non-U.S. Dollar currencies and use up to $10.0 million of the credit limit for the issuance of letters of credit. The Amendment also extended the original maturity date of the Credit Agreement from December 20, 2016 to October 30, 2019. At May 31, 2016, the Company had borrowings of $69.0 million and letters of credit of $4.8 million were outstanding under the Credit Agreement. The Company capitalized $0.7 million of costs associated with this debt modification.
 
Loans under the Credit Agreement bear interest at LIBOR plus an applicable LIBOR margin ranging from 1% to 1.75%, or a base rate less a margin of 1.25% to 0.375%, at the option of the Company, based upon the Company’s Funded Debt Leverage Ratio. Funded Debt Leverage Ratio is generally the ratio of (1) all outstanding indebtedness for borrowed money and other

62


interest-bearing indebtedness as of the date of determination to (2) EBITDA (which is (a) net income, less (b) income (or plus loss) from discontinued operations and extraordinary items, plus (c) income tax expenses, plus (d) interest expense, plus (e) depreciation, depletion, and amortization (including non-cash loss on retirement of assets), plus (f) stock compensation expense, less (g) cash expense related to stock compensation, plus or minus certain other adjustments) for the period of four consecutive fiscal quarters immediately preceding the date of determination. The Company has the benefit of the lowest margin if its Funded Debt Leverage Ratio is equal to or less than 0.5 to 1, and the margin increases as the ratio increases, to the maximum margin if the ratio is greater than 2.0 to 1. The Company will also bear additional costs for market disruption, regulatory changes effecting the lenders’ funding costs, and default pricing of an additional 2% interest rate margin on any amounts not paid when due. Amounts borrowed under the Credit Agreement are secured by liens on substantially all of the assets of the Company.
 
The Credit Agreement contains financial covenants requiring that the Company maintain a Funded Debt Leverage Ratio of no greater than 3.25 to 1 and an Interest Coverage Ratio of at least 3.0 to 1. Interest Coverage Ratio means the ratio, as of any date of determination, of (a) EBITDA for the 12 month period immediately preceding the date of determination, to (b) all interest, premium payments, debt discount, fees, charges and related expenses of the Company and its subsidiaries in connection with borrowed money (including capitalized interest) or in connection with the deferred purchase price of assets, in each case to the extent treated as interest in accordance with GAAP, paid during the 12 month period immediately preceding the date of determination. The Credit Agreement also limits the Company’s ability to, among other things, create liens, make investments, incur more indebtedness, merge or consolidate, make dispositions of property, pay dividends and make distributions to stockholders, enter into a new line of business, enter into transactions with affiliates and enter into burdensome agreements. The Credit Agreement does not limit the Company’s ability to acquire other businesses or companies except that the acquired business or company must be in the Company's line of business, the Company must be in compliance with the financial covenants on a pro forma basis after taking into account the acquisition, and, if the acquired business is a separate subsidiary, in certain circumstances the lenders will receive the benefit of a guaranty of the subsidiary and liens on its assets and a pledge of its stock.
 
As of May 31, 2016, the Company was in compliance with the terms of the Credit Agreement, and has undertaken to continuously monitor compliance with these covenants.
 
Notes Payable and Other Debt
 
In connection with certain of its acquisitions, the Company issued subordinated notes payable to the sellers. The maturity of the notes that remain outstanding range from two to five years from the date of acquisition with stated interest rates ranging from 0% to 4%. The Company has discounted these obligations to reflect a 2% to 4% market interest. Unamortized discount on the notes was de minimis as of May 31, 2016 and 2015. Amortization is recorded as interest expense in the consolidated statements of income.

The Company has evaluated current market conditions and borrower credit quality and has determined that the carrying value of its long-term debt approximates fair value. The fair value of the Company’s notes payable and capital lease obligations approximates their carrying amounts based on anticipated interest rates which management believes would currently be available to the Company for similar issues of debt.

Scheduled principal payments due under all borrowing agreements in each of the five years and thereafter subsequent to May 31, 2016 are as follows:
 
2017
$
12,553

2018
881

2019
751

2020
69,446

2021
294

Thereafter
1,084

Total
$
85,009

 
12.        Fair Value Measurements
 
The Company performs fair value measurements in accordance with the guidance provided by ASC 820, Fair Value Measurements and Disclosures. ASC 820 defines fair value as the price that would be received to sell an asset or paid to

63


transfer a liability in an orderly transaction between market participants at the measurement date. It also establishes a three level hierarchy that prioritizes the inputs used to measure fair value. The three levels of the hierarchy are defined as follows:
 
Level 1 — Inputs are unadjusted quoted prices in active markets for identical assets or liabilities that the Company has the ability to access at the measurement date.
 
Level 2 — Observable inputs other than quoted prices included in Level 1, including quoted prices for similar assets or liabilities in active markets, quoted prices for identical assets or liabilities in inactive markets, inputs other than quoted prices that are observable for the asset or liability and inputs derived principally from or corroborated by observable market data.

Level 3 — Unobservable inputs reflecting the Company’s own assumptions about inputs that market participants would use in pricing the asset or liability based on the best information available.
 
In accordance with the fair value hierarchy described above, the following table shows the fair value of the Company’s financial liabilities that are required to be remeasured at fair value on a recurring basis:
 
 
May 31, 2016
 
Level 1
 
Level 2
 
Level 3
 
Total
Liabilities:
 

 
 

 
 

 
 

Contingent consideration
$

 
$

 
$
2,075

 
$
2,075

Total Liabilities
$

 
$

 
$
2,075

 
$
2,075

 
 
May 31, 2015
 
Level 1
 
Level 2
 
Level 3
 
Total
Liabilities:
 

 
 

 
 

 
 

Contingent consideration
$

 
$

 
$
6,411

 
$
6,411

Total Liabilities
$

 
$

 
$
6,411

 
$
6,411

 
The fair value of contingent consideration liabilities that was classified as Level 3 in the table above was estimated using a discounted cash flow technique with significant inputs that are not observable in the market and thus represents a Level 3 fair value measurement as defined in ASC 820. The significant inputs in the Level 3 measurement not supported by market activity include the probability assessments of expected future cash flows related to the acquisitions, appropriately discounted considering the uncertainties associated with the obligation, and as calculated in accordance with the terms of the acquisition agreements.
 
13. Share-Based Compensation
 
The Company has share-based incentive awards outstanding to its eligible employees and Directors under two employee stock ownership plans: (i) the 2007 Stock Option Plan (the 2007 Plan), and (ii) the 2009 Long-Term Incentive Plan (the 2009 Plan). No further awards may be granted under the 2007 Plan, although awards granted under the 2007 Plan remain outstanding in accordance with their terms. Awards granted under the 2009 Plan may be in the form of stock options, restricted stock units and other forms of share-based incentives, including performance restricted stock units, stock appreciation rights and deferred stock rights. The 2009 Plan allows for the grant of awards of up to approximately 2,286,000 shares of common stock, of which approximately 658,000 shares were available for future grants as of May 31, 2016. As of May 31, 2016, there was an aggregate of approximately 2,232,000 stock options outstanding and approximately 902,000 unvested restricted stock units outstanding under the 2009 Plan and the 2007 Plan.
 
Stock Options
 
For the fiscal years ended May 31, 2016 and 2015, the Company recognized share-based compensation expense related to stock option awards of less than $0.1 million, respectively, and $0.7 million for the fiscal year ended May 31, 2014. No stock options were granted during the years ended May 31, 2016, 2015 and 2014. As of May 31, 2016, no unrecognized compensation costs remained related to stock option awards. Cash proceeds from, and the intrinsic value of stock options exercised during the years ended May 31, 2016, 2015 and 2014 were as follows:
 

64


 
For the year ended May 31,
 
2016
 
2015
 
2014
Cash proceeds from options exercised
$
543

 
$
750

 
$
996

Aggregate intrinsic value of options exercised
658

 
563

 
1,247

 
A summary of the stock option activity, weighted average exercise prices, options outstanding and exercisable as of May 31, 2016 is as follows (in thousands, except per share amounts):
 
For the year ended May 31,
 
2016
 
2015
 
2014
 
Common
Stock
Options
 
Weighted
Average
Exercise
Price
 
Common
Stock
Options
 
Weighted
Average
Exercise
Price
 
Common
Stock
Options
 
Weighted
Average
Exercise
Price
Outstanding at beginning of year:
2,287

 
$
13.13

 
2,352

 
$
13.09

 
2,464

 
$
12.93

Granted

 
$

 

 
$

 

 
$

Exercised
(55
)
 
$
9.87

 
(65
)
 
$
11.54

 
(103
)
 
$
9.67

Expired or forfeited

 
$

 

 
$

 
(9
)
 
$
10.03

Outstanding at end of year:
2,232

 
$
13.21

 
2,287

 
$
13.13

 
2,352

 
$
13.09

 
 
 
 
 
For the year ended May 31, 2016
 
 
 
 
Options Outstanding
 
Options Exercisable
Range of Exercise Prices
 
Total
Options
Outstanding
 
Weighted
Average
Remaining
Life (Years)
 
Weighted
Average
Exercise
Price
 
Number
Exercisable
 
Weighted
Average
Exercise
Price
$6.15-$11.54
 
137

 
2.3
 
$
9.09

 
137

 
$
9.09

$13.46-$22.35
 
2,095

 
3.2
 
$
13.48

 
2,095

 
$
13.48

 
 
2,232

 
 
 
 

 
2,232

 
 

 
 
 
 
 
 
 
 
 
 
 
Aggregate Intrinsic Value
 
$
25,887

 
 
 
 

 
$
25,887

 
 

 
Restricted Stock Unit Awards
 
The Company recognized approximately $4.4 million of share-based compensation in fiscal 2016, $4.7 million of share-based compensation in fiscal 2015 and $4.0 million of share-based compensation expense in fiscal 2014 related to restricted stock unit awards. As of May 31, 2016, there were approximately $7.0 million of unrecognized compensation costs, net of estimated forfeitures, related to restricted stock unit awards, which are expected to be recognized over a remaining weighted average period of 2.1 years.
 
Approximately 264,000 restricted stock units were granted in fiscal 2016, 192,000 restricted stock units were granted in fiscal 2015 and 295,000 restricted stock units were granted in fiscal 2014. Approximately 223,000 restricted stock units vested in fiscal 2016, 232,000 restricted stock units vested in fiscal 2015 and 178,000 restricted stock units vested in fiscal 2014. The fair value of these units was $3.5 million, $5.2 million and $3.3 million, respectively. Upon vesting, restricted stock units are generally net share-settled to cover the required minimum withholding tax and the remaining amount is converted into an equivalent number of shares of common stock. Approximately 30,000 shares were forfeited in fiscal 2016, 24,000 shares were forfeited in fiscal 2015 and 44,000 shares were forfeited in fiscal 2014.

During the years ended May 31, 2016, 2015 and 2014, the Company granted approximately 28,000, 21,000 and 19,000 shares, respectively, of fully-vested common stock to its five non-employee directors, in connection with its non-employee director compensation plan. These shares had a grant date fair value of approximately $0.5 million, $0.4 million and $0.4 million, respectively, which is included in the share-based compensation expense recorded during the years ended May 31, 2016, 2015 and 2014.

 
Performance Restricted Stock Units
 

65


In fiscal 2014, the company granted one-year, two-year and three-year performance restricted stock units to its executive and certain other senior officers. These units have requisite service periods of three years and have no dividend rights. The actual payout of these units, before the fiscal 2016 modification as described below, was based on the Company’s performance over one, two and three-year periods (based on pre-established targets) and a market condition modifier based on total shareholder return (TSR) compared to an industry peer group. The one-year and two-year performance conditions of the fiscal 2014 awards were evaluated before modification of the awards and not achieved. The one-year and two-year market conditions of the fiscal 2014 awards were evaluated before modification of the awards and achieved. The one-year and two-year awards related to market conditions will payout at 170% and 105%, respectively, of target once the requisite service period is complete. The three-year performance and market condition awards were surrendered as part of the fiscal 2016 modification described below.
   
In fiscal 2015, the company granted performance restricted stock units to its executive and certain other senior officers. These units have requisite service periods of three years and have no dividend rights. The actual payout of these units, before the fiscal 2016 modification as described below, was based on the Company’s performance over the three-year period (based on pre-established targets) and a market condition modifier based on (TSR) compared to an industry peer group. The 2015 awards were surrendered as part of the fiscal 2016 modification described below.

In the first quarter of fiscal 2016, the Company modified its equity compensation program and granted 154,000 performance restricted stock units to its executive and certain other senior officers. As a condition for receiving any awards under the revised fiscal 2016 plan, the executive and senior officers surrendered and released all rights to receive any shares under the three-year 2014 awards and three-year 2015 awards with a performance or market condition. The Company has accounted for the fiscal 2016 awards as modifications in accordance with ASC 718, Compensation - Stock Compensation. These units have requisite service periods of five years and have no dividend rights. The actual payout of these units will vary based on the Company’s performance over a one-year period based on three metrics related to the Company’s fiscal 2016 performance: (1) Operating Income, (2) Adjusted EBITDAS, which is consistent with Adjusted EBITDA as disclosed in the financial statements, which is net income before interest, taxes, depreciation, amortization, non-cash stock-based compensation expense, acquisition related items, and other non-routine items as approved by the Company's Compensation Committee and (3) Revenue. There is also a discretionary portion based on individual performance. During the year ended May 31, 2016, the Company evaluated the performance metrics, and due to achievement above target, increased the estimated performance shares expected to be granted by approximately 85,000 units to a total of 239,000 units.
Compensation costs are initially measured assuming that the target performance conditions will be achieved. However, compensation costs related to the performance conditions are adjusted for subsequent changes in the expected outcome of the performance conditions. The discretionary portion of the fiscal 2016 awards are liability-classified and adjusted to fair value each reporting period. Compensation costs for the discretionary portion of the awards are recognized over the same five year requisite service period as the awards based on the Company’s fiscal 2016 performance.
Compensation costs related to the TSR conditions for the one-year and two-year 2014 awards described above were fixed at the measurement date, and not subsequently adjusted.
Compensation expense related to all performance restricted stock units described above was $1.6 million, $1.5 million and $1.2 million for the years ended May 31, 2016, 2015 and 2014. At May 31, 2016, there was $3.2 million of total unrecognized compensation costs related to approximately 328,000 nonvested performance restricted stock units. These costs are expected to be recognized over a weighted-average period of approximately 3.7 years.
For the fiscal years ended May 31, 2016, 2015 and 2014, the income tax benefit recognized on all share based compensation arrangements above was approximately $2.2 million, $2.3 million and $2.3 million, respectively.

14. Income Taxes
 
Income before provision for income taxes is as follows:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Income (loss) before provision for income taxes from:
 

 
 

 
 

U.S. operations
$
27,772

 
$
26,893

 
$
25,433

Foreign operations
10,643

 
(1,162
)
 
9,670

Earnings before income taxes
$
38,415

 
$
25,731

 
$
35,103

 

66


The provision for income taxes consists of the following:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Current
 

 
 

 
 

Federal
$
9,156

 
$
8,489

 
$
8,836

States and local
1,537

 
1,177

 
1,689

Foreign
3,672

 
1,493

 
2,484

Reserve for uncertain tax positions
(529
)
 
(48
)
 
59

Total current
13,836

 
11,111

 
13,068

Deferred
 

 
 

 
 

Federal
82

 
(145
)
 
(53
)
States and local
(51
)
 
(126
)
 
395

Foreign
(557
)
 
(2,416
)
 
(967
)
Total deferred
(526
)
 
(2,687
)
 
(625
)
Net change in valuation allowance
455

 
1,316

 
85

Net deferred
(71
)
 
(1,371
)
 
(540
)
Provision for income taxes
$
13,765

 
$
9,740

 
$
12,528

 
The provision for income taxes differs from the amount computed by applying the statutory federal tax rate to income tax as follows:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Federal tax at statutory rate
$
13,445

 
35.0
 %
 
$
9,006

 
35.0
 %
 
$
12,286

 
35.0
 %
State taxes, net of federal benefit
966

 
2.5
 %
 
683

 
2.7
 %
 
1,355

 
3.9
 %
Foreign tax
(610
)
 
(1.6
)%
 
(517
)
 
(2.0
)%
 
(1,868
)
 
(5.3
)%
Contingent consideration
(425
)
 
(1.1
)%
 
(914
)
 
(3.6
)%
 
24

 
0.1
 %
Permanent differences
245

 
0.6
 %
 
196

 
0.8
 %
 
531

 
1.5
 %
Other
(311
)
 
(0.8
)%
 
(30
)
 
(0.1
)%
 
115

 
0.3
 %
Change in valuation allowance
455

 
1.2
 %
 
1,316

 
5.1
 %
 
85

 
0.2
 %
Total provision for income taxes
$
13,765

 
35.8
 %
 
$
9,740

 
37.9
 %
 
$
12,528

 
35.7
 %
 

67


Deferred income tax attributes resulting from differences between financial accounting amounts and income tax basis of assets and liabilities are as follows:
 
May 31,
 
2016
 
2015
Deferred income tax assets
 

 
 

Allowance for doubtful accounts
$
940

 
$
1,036

Inventory
518

 
796

Intangible assets
1,641

 
1,254

Accrued expenses
4,668

 
3,455

Net operating loss carryforward
4,036

 
4,738

Capital lease obligations
1,167

 
379

Capital losses
719

 

Deferred share-based compensation
6,477

 
6,241

Other
440

 
370

Deferred income tax assets
20,606

 
18,269

Valuation allowance
(3,397
)
 
(3,238
)
Net deferred income tax assets
17,209

 
15,031

Deferred income tax liabilities
 

 
 

Property and equipment
(9,785
)
 
(8,214
)
Goodwill
(12,535
)
 
(10,728
)
Intangible assets
(5,989
)
 
(6,677
)
Other
(12
)
 
(44
)
Deferred income tax liabilities
(28,321
)
 
(25,663
)
Net deferred income taxes
$
(11,112
)
 
$
(10,632
)
 
As of May 31, 2016, the Company had federal net operating loss carry forwards (NOL’s) in the amount of approximately $0.3 million which may be utilized subject to limitation under Internal Revenue code section 382. The federal NOL's expire at various times from 2029 to 2033. In addition, as of May 31, 2016 the Company had state and foreign NOLs of $3.6 million and $12.1 million, respectively. The state NOLs expire at various times from 2025 to 2036. Approximately $1.7 million of the foreign NOLs expire at various times from 2021 to 2036, while the remainder of the Company's foreign NOLs do not expire.

In assessing the ability to realize deferred tax assets, management considers whether it is more likely than not that some portion or all of the deferred tax assets will be realized. Valuation allowances are provided when management believes the Company's deferred tax assets are not recoverable based on an assessment of estimated future taxable income that incorporates ongoing, prudent and feasible tax planning strategies. At May 31, 2016, the Company has a valuation allowance of approximately $3.4 million primarily against certain state and foreign NOLs and the capital losses generated by the disposals of certain foreign subsidiaries. For the year ended May 31, 2016, the valuation allowance increased $0.2 million attributable to tax losses generated by foreign subsidiaries. Except for those deferred tax assets subject to the valuation allowance, management believes that it will realize all deferred tax assets as a result of sufficient future taxable income in each tax jurisdiction in which we have deferred tax assets.
 

68


The following table summarizes the changes in the Company’s gross unrecognized tax benefits, excluding interest and penalties:
 
For the year ended May 31,
 
2016
 
2015
Balance at June 1
$
763

 
$
1,016

Additions for tax positions related to the current fiscal year
29

 
30

Additions for tax positions related to prior years
52

 

Decreases for tax positions related to prior years
(23
)
 
(1
)
Impact of foreign exchange fluctuation
(91
)
 
(112
)
Settlements
(29
)
 
(50
)
Reductions related to the expiration of statutes of limitations
(398
)
 
(120
)
Balance at May 31
$
303

 
$
763

 
The Company has recorded the unrecognized tax benefits in other long-term liabilities in the consolidated balance sheets. As of May 31, 2016 and 2015, there were approximately $0.4 million and $1.1 million of unrecognized tax benefits, respectively, including penalties and interest that if recognized would favorably affect the effective tax rate. Interest and penalties related to unrecognized tax benefits are recorded in income tax expense and are not significant for the years ending May 31, 2016 and 2015. The Company anticipates a decrease to its unrecognized tax benefits of approximately $0.2 million excluding interest and penalties within the next 12 months.
 
The Company is subject to taxation in the United States and various states and foreign jurisdictions. The Company is no longer subject to U.S. federal income tax examinations for years ending before May 31, 2013 and generally is no longer subject to state, local or foreign income tax examinations by tax authorities for years ending before May 31, 2012.
 
The Company has not recognized U.S. tax expense on its undistributed international earnings or losses of its foreign subsidiaries since it intends to indefinitely reinvest the earnings outside the United States. Net income (loss) of foreign subsidiaries was $7.5 million and $(0.8) million for fiscal 2016 and 2015, respectively. We have recognized no deferred tax liability for the remittance of such earnings to the U.S. since it is our intention to utilize those earnings in the foreign operations. Determination of the amount of any unrecognized deferred income tax liability on this temporary difference is not practicable because of the complexities of the hypothetical calculation.
 
15. Employee Benefit Plans
 
The Company provides a 401(k) savings plan for eligible U.S. based employees. Employee contributions are discretionary up to the IRS limits each year and catch up contributions are allowed for employees 50 years of age or older. Under the 401(k) plan, employees become eligible to participate on the first day of the month after six months of continuous service. Under this plan, the Company matches 50% of the employee’s contributions up to 6% of the employee’s annual compensation, as defined by the plan. There is a five-year vesting schedule for the Company match. The Company’s contribution to the plan was $3.3 million, $2.8 million and $2.5 million for the years ended May 31, 2016, 2015 and 2014, respectively.
 
The Company participates with other employers in contributing to a union plan, which covers certain U.S. based union employees. The plan is not administered by the Company and contributions are determined in accordance with provisions of a collective bargaining agreement. The Company’s contributions to the plan were $0.2 million, $0.2 million and $0.1 million for the years ended May 31, 2016, 2015 and 2014. The Company has benefit plans covering certain employees in selected foreign countries. Amounts charged to expense under these plans were not significant in any year.
 
16. Related Party Transactions
 
The Company leases its headquarters under an operating lease from a shareholder and officer of the Company. On August 1, 2014, the Company extended its lease at its headquarters requiring monthly payments through October 2024. Total rent payments made during fiscal 2016 were approximately $0.9 million. See Note 18 — Commitments and Contingencies for further detail related to operating leases.
 
The Company has a lease for office space located in France, which is partly owned by a shareholder and officer. Total rent payments made during fiscal 2016 were approximately $0.2 million.
 

69


The Company has a lease for office space located in Brazil, which is partly owned by a shareholder and officer. Total rent payments made during fiscal 2016 were approximately $0.1 million.
 
17. Obligations under Capital Leases
 
The Company leases certain office space, and service equipment under capital leases, requiring monthly payments ranging from less than $1 thousand to $81 thousand, including effective interest rates that range from approximately 1% to 7% expiring through May 2022. The net book value of assets under capital lease obligations was $19.8 million and $19.9 million at May 31, 2016 and 2015, respectively.
 
Scheduled future minimum lease payments subsequent to May 31, 2016 are as follows:
2017
$
9,112

2018
6,491

2019
3,810

2020
1,520

2021
134

Thereafter
122

Total minimum lease payments
21,189

Less: amount representing interest
(1,422
)
Present value of minimum lease payments
19,767

Less: current portion of obligations under capital leases
(7,835
)
Obligations under capital leases, net of current portion
$
11,932

 
18. Commitments and Contingencies
 
Operating Leases
 
The Company is party to various noncancelable lease agreements, primarily for its international and domestic office and lab space. Future minimum lease payments under noncancelable operating leases in each of the five years and thereafter subsequent to May 31, 2016 are as follows:
 
2017
$
9,956

2018
7,903

2019
6,580

2020
5,219

2021
4,112

Thereafter
13,039

Total
$
46,809

 
Total rent expense was $11.2 million, $10.6 million and $9.5 million for the years ended May 31, 2016, 2015 and 2014, respectively.
 
Legal Proceedings and Government Investigations
 
The Company is subject to periodic legal proceedings, investigations and claims that arise in the ordinary course of business. The Company cannot predict with certainty the ultimate resolution of legal proceedings, investigations and claims asserted against it. Except for the matters described below, the Company does not believe that any currently pending legal proceeding to which the Company is a party will have a material adverse effect on its business, results of operations, cash flows or financial condition. The costs of defense and amounts that may be recovered against the Company may be covered by insurance for certain matters.


Litigation and Commercial Claims

70


 
The Company is currently a defendant in a consolidated purported class and collective action, Edgar Viceral and David Kruger v Mistras Group, et al, pending in the U.S. District Court for the Northern District of California. This matter results from the consolidation of two cases originally filed in California state court in April 2015. The consolidated case alleges violations of California statutes, primarily the California Labor Code, and seeks to proceed as a collective action under the U.S. Fair Labor Standards Act.  The case is predicated on claims for allegedly missed rest and meal periods, inaccurate wage statements, and failure to pay all wages due, as well as related unfair business practices, and is requesting payment of all damages, including unpaid wages, and various fines and penalties available under California and Federal law.

The parties have reached a settlement of the case, whereby the Company agreed to pay $6 million to resolve the allegations and avoid further distraction that would result if the litigation continued. The settlement is subject to court approval, and a hearing for preliminary approval is currently scheduled for August 18, 2016. The Company recorded a pre-tax charge of $6.3 million in the fourth quarter of fiscal 2016 for the settlement and payment of payroll taxes and other costs related to the settlement. The settlement will cover claims dating back to April 2011 in some cases and involves approximately 4,900 current and former employees.
 
During fiscal 2013, the Company performed radiography work on the construction of a pipeline project in the U.S. The owner of the pipeline project contends that certain of the radiography images the Company’s technicians prepared regarding the project did not meet the code quality interpretation standards required by the American Petroleum Institute. The project owner is claiming damages as a result of the alleged quality defects of the Company’s radiography images. No lawsuit has been filed at this time, but the Company received a demand for damages of approximately $6 million.  The Company is currently unable to determine the likely outcome or reasonably estimate the amount or range of potential liability related to this matter, and accordingly, has not established any reserves for this matter.

The Company’s subsidiary in France has been involved in a dispute with a former owner of a business in France purchased by the Company’s French subsidiary. The former owner received a judgment in his favor in the amount of approximately $0.4 million for payment of the contingent consideration portion of the purchase price for the business. The judgment is being appealed, but the Company recorded a reserve for the full amount of the judgment in the fourth quarter of fiscal 2016.


Government Investigations

In May 2015, the Company received a notice from the U.S. Environmental Protection Agency (“EPA”) that it performed a preliminary assessment at a leased facility the Company operates in Cudahy, California. Based upon the preliminary assessment, the EPA is conducting an investigation of the site, which includes taking groundwater and soil samples. The purpose of the investigation is to determine whether any hazardous materials were released from the facility. The Company has been informed that certain hazardous materials and pollutants have been found in the ground water in the general vicinity of the site and the EPA is attempting to ascertain the origination or source of these materials and pollutants. Given the historic industrial use of the site, the EPA determined that the site of the Cudahy facility should be examined, along with numerous other sites in the vicinity. At this time, the Company is unable to determine whether it has any liability in connection with this matter and if so, the amount or range of any such liability, and accordingly, has not established any reserves for this matter.

In January 2012, the Company received notice of a governmental investigation concerning an environmental incident which occurred in February 2011 outside on the premises of the Cudahy facility.  No human injury or property damage was reported or appears to have been caused as a result of this incident. While management cannot predict the ultimate outcome of this matter, based on its internal investigation to date, the Company does not believe the outcome will have a material effect on its financial condition or results of operations. To the Company’s knowledge, this matter has been dormant since fiscal 2012.


Acquisition-related contingencies
 
The Company is liable for contingent consideration in connection with certain of its acquisitions. As of May 31, 2016, total potential acquisition-related contingent consideration ranged from zero to $16.6 million and would be payable upon the achievement of specific performance metrics by certain of the acquired companies over the next four years of operations. See Note 7 - Acquisitions for further discussion of the Company’s acquisitions.
 
19. Segment Disclosure
 
The Company’s three operating segments are:

71


 
Services. This segment provides asset protection solutions predominantly in North America with the largest concentration in the United States along with a growing Canadian services business, consisting primarily of non-destructive testing, and inspection and engineering services that are used to evaluate the structural integrity and reliability of critical energy, industrial and public infrastructure.

International. This segment offers services, products and systems similar to those of the Company’s other segments to global markets, in Europe, the Middle East, Africa, Asia and South America, but not to customers in China and South Korea, which are served by the Products and Systems segment.

Products and Systems. This segment designs, manufactures, sells, installs and services the Company’s asset protection products and systems, including equipment and instrumentation, predominantly in the United States.

Costs incurred for general corporate services, including finance, legal, and certain other costs that are provided to the segments are reported within Corporate and eliminations. Sales to the International segment from the Products and Systems segment and subsequent sales by the International segment of the same items are recorded and reflected in the operating performance of both segments. Additionally, engineering charges and royalty fees charged to the Services and International segments by the Products and Systems segment are reflected in the operating performance of each segment. All such intersegment transactions are eliminated in the Company’s consolidated financial reporting.
 
The accounting policies of the reportable segments are the same as those described in Note 2 — Summary of Significant Accounting Policies. Segment income from operations is one of the primary performance measures used by the Chief Executive Officer, who is the chief operating decision maker, to assess the performance of each segment and make decisions as to resource allocations. Certain general and administrative costs such as human resources, information technology and training are allocated to the segments. Segment income from operations excludes interest and other financial charges and income taxes. Corporate and other assets are comprised principally of cash, deposits, property, plant and equipment, domestic deferred taxes, deferred charges and other assets. Corporate loss from operations consists of administrative charges related to corporate personnel and other charges that cannot be readily identified for allocation to a particular segment.
 
Selected financial information by segment for the periods shown was as follows (intercompany transactions are eliminated in Corporate and eliminations):

 
For the year ended May 31,
 
2016
 
2015
 
2014
Revenues
 

 
 

 
 

Services
$
553,279

 
$
540,224

 
$
443,229

International
143,025

 
146,953

 
161,395

Products and Systems
30,293

 
31,255

 
33,544

Corporate and eliminations
(7,416
)
 
(7,180
)
 
(14,721
)
 
$
719,181

 
$
711,252

 
$
623,447

 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Gross profit
 

 
 

 
 

Services
$
145,262

 
$
135,201

 
$
114,182

International
43,613

 
34,572

 
44,893

Products and Systems
14,022

 
14,314

 
14,495

Corporate and eliminations
111

 
646

 
(627
)
 
$
203,008

 
$
184,733

 
$
172,943

 

72


 
For the year ended May 31,
 
2016
 
2015
 
2014
Income from operations
 

 
 

 
 

Services
$
52,552

 
$
49,142

 
$
43,221

International
9,293

 
(575
)
 
10,238

Products and Systems
2,688

 
2,461

 
2,552

Corporate and eliminations
(21,356
)
 
(20,675
)
 
(17,716
)
 
$
43,177

 
$
30,353

 
$
38,295

 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Depreciation and amortization
 

 
 

 
 

Services
$
22,725

 
$
22,268

 
$
17,794

International
7,774

 
8,451

 
8,065

Products and Systems
2,323

 
2,426

 
2,373

Corporate and eliminations
(348
)
 
141

 
197

 
$
32,474

 
$
33,286

 
$
28,429

 
 
May 31,
 
2016
 
2015
Intangible assets, net
 

 
 

Services
$
19,022

 
$
24,598

International
17,703

 
19,482

Products and Systems
6,054

 
7,004

Corporate and eliminations
713

 
192

 
$
43,492

 
$
51,276

 
May 31,
 
2016
 
2015
Total assets
 

 
 

Services
$
308,008

 
$
301,031

International
132,643

 
126,643

Products and Systems
31,596

 
35,464

Corporate and eliminations
10,428

 
8,589

 
$
482,675

 
$
471,727

 
Revenue and long-lived assets by geographic area was as follows:
 
 
For the year ended May 31,
 
2016
 
2015
 
2014
Revenue
 

 
 

 
 

United States
$
519,361

 
$
491,818

 
$
403,001

Other Americas
67,809

 
68,628

 
55,120

Europe
118,566

 
137,071

 
143,931

Asia-Pacific
13,445

 
13,735

 
21,395

 
$
719,181

 
$
711,252

 
$
623,447

 

73


 
May 31,
 
2016
 
2015
Long-lived assets
 

 
 

United States
$
186,543

 
$
190,997

Other Americas
29,743

 
31,558

Europe
75,102

 
73,744

Asia-Pacific

 
647

 
$
291,388

 
$
296,946

 




20. Selected Quarterly Financial Information (unaudited)
 
The following is a summary of the quarterly results of operations for the years ended May 31, 2016 and 2015:
 
Fiscal quarter ended 
 
May 31,
2016
 
February 29,
2016
 
November 30, 2015
 
August 31, 2015
 
May 31,
2015
 
February 28,
2015
 
November 30, 2014
 
August 31, 2014
Revenues
 
$
184,187

 
$
160,355

 
$
194,786

 
$
179,853

 
$
174,686

 
$
163,100

 
$
206,893

 
$
166,573

Gross Profit
 
52,000

 
42,809

 
56,925

 
51,274

 
44,966

 
38,734

 
59,039

 
41,994

Income from operations
 
4,918

 
5,758

 
19,569

 
12,932

 
4,627

 
3,870

 
18,192

 
3,664

Net income attributable to Mistras Group, Inc.
 
$
2,764

 
$
3,593

 
$
11,425

 
$
6,872

 
$
2,171

 
$
1,817

 
$
10,427

 
$
1,666

Earnings per common share:
 
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

Basic
 
$
0.10

 
$
0.12

 
$
0.40

 
$
0.24

 
$
0.08

 
$
0.06

 
$
0.36

 
$
0.06

Diluted
 
$
0.09

 
$
0.12

 
$
0.39

 
$
0.23

 
$
0.07

 
$
0.06

 
$
0.35

 
$
0.06

 
21. Subsequent Events

Subsequent to May 31, 2016, the Company completed two acquisitions of asset protection businesses for $1.2 million in cash upon closing and $0.3 million of deferred purchase price. In addition to the cash consideration, the acquisitions provide for possible contingent consideration up to $0.6 million to be earned based upon the achievement of specific performance metrics over the next three years of operation. The Company is in the process of completing the preliminary purchase price allocations. These acquisitions were not significant and no pro forma information has been included.

Item 9.   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
 
None.

Item 9A.   Controls and Procedures
 
Evaluation of Disclosure Controls and Procedures
 
Pursuant to Rule 13a-15(b) under the Exchange Act, our management carried out an evaluation, under the supervision and with the participation of our Chairman, Chief Executive Officer and President and our Executive Vice President, Chief Financial Officer and Treasurer, of the effectiveness of the design and operation of our disclosure controls (as defined in Rule 13a-15(e) of the Exchange Act) and procedures. Based upon that evaluation, our Chairman, Chief Executive Officer and President and our Executive Vice President, Chief Financial Officer and Treasurer concluded that, as of May 31, 2016, our disclosure controls and procedures were effective.
 
Management’s Report on Internal Control Over Financial Reporting
 
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended (the Exchange Act). Our internal control over financial reporting is a process designed by, or under the supervision of, our Chairman, Chief Executive Officer and President and our Executive Vice President, Chief Financial Officer and Treasurer, and effected by the Company’s

74


board of directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies or procedures may deteriorate.
 
Our management assessed the effectiveness of our internal control over financial reporting as of May 31, 2016. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in the updated Internal Control — Integrated Framework issued in 2013. Based on that assessment, our management concluded that, as of May 31, 2016, our internal control over financial reporting was effective.
 
The effectiveness of the Company’s internal control over financial reporting as of May 31, 2016, has been audited by KPMG LLP, an independent registered public accounting firm, as stated in their report which appears herein.
 
Changes in Internal Control over Financial Reporting
 
During the quarter ended May 31, 2016, we identified deficiencies in general information technology controls (GITCs) that affected the use of a report-writer IT application operated in connection with the Company’s enterprise resource planning systems. Specifically, we did not have effective controls over the configuration of the reports and completeness and accuracy of information presented in the reports. Reports produced by the report-writer IT application are used in preparation of the consolidated financial statements, the measurement of certain significant accounts and the operation of related internal controls. We have determined that these deficiencies in our internal control over financial reporting constituted a material weakness that originated in periods prior to the fourth quarter of 2016. The deficiencies resulted in no misstatements to the current or previously issued financial statements.
In connection with the preparation of the annual consolidated financial statements as of and for the year ended May 31, 2016, management designed and implemented effective controls over the generation of information and reports using the report-writer IT application going forward and retrospectively operated those controls for each instance that the reports were used by management as part of its internal control over financial reporting during fiscal year 2016, thereby remediating the material weakness as of May 31, 2016. Further, we have enhanced the design of our existing general information technology controls over the report-writer application. We will monitor these new controls going forward and implement additional enhancements to our internal control over financial reporting in the next fiscal year.
We have determined that the actions taken to date have sufficiently improved the Company’s internal control over financial reporting such that as of May 31, 2016, there is not a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis. Based on the remediation of the deficiencies we concluded that our internal control over financial reporting was effective as of May 31, 2016.

Other than the changes noted above, there has been no change in our internal control over financial reporting during the quarter ended May 31, 2016, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
 

Item 9B.   Other Information
 
None.
 
PART III
 
ITEM 10.   DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
 
Directors
 
The information required by Item 10 is incorporated herein by reference to the information to be included in our definitive proxy statement related to the 2016 annual shareholders meeting. The information concerning our executive officers required by this Item 10 is provided under the caption “Executive Officers of the Registrant” in Part I hereof.

75


 
ITEM 11.   EXECUTIVE COMPENSATION
 
The information required by Item 11 is incorporated by reference to the information to be included in our definitive proxy statement related to the 2016 annual shareholders meeting.
 
ITEM 12.   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
 
The information required by Item 12 regarding Security Ownership of Certain Beneficial Owners and Management and Related Stockholders is incorporated by reference to the information to be included in our definitive proxy statement related to the 2016 annual meeting of shareholders.

Equity Compensation Plan Information
 
The following table provides certain information as of May 31, 2016 concerning the shares of our common stock that may be issued under existing equity compensation plans.
 
Plan Category
 
Number of Securities
to be Issued Upon
Exercise of
Outstanding Options
 
Weighted Average
Exercise Price of
Outstanding Options
 
Number of Securities
Remaining Available for
Future Issuance Under
Equity Compensation Plans
 
 
(in thousands, except exercise price data)
Equity Compensation Plans Approved by Security Holders (1)
 
2,232

 
$
13.21

 
658

 
 
 
 
 
 
 
Equity Compensation Plans Not Approved by Security Holders
 

 

 

 
 
 
 
 
 
 
Total
 
2,232

 
$
13.21

 
658

________________________________________
(1)         Includes all the Company’s plans: 1995 Incentive Stock Option and Restricted Stock Plan, 2007 Stock Option Plan and 2009 Long-Term Incentive Plan.

ITEM 13.   CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
 
The information required by Item 13 is incorporated by reference to the information to be included in our definitive proxy statement related to the 2016 annual shareholders meeting.
 
ITEM 14.   PRINCIPAL ACCOUNTANT FEES AND SERVICES
 
The information required by Item 14 is incorporated by reference to the information to be included in our definitive proxy statement related to the 2016 annual shareholders meeting.
 
PART IV
 





ITEM 15.   EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
 
(1) The following financial statements are filed herewith in Item 8 of Part II above:

76


 
(2)         Financial Statement Schedules
 
All other schedules are omitted because of the absence of conditions under which they are required or because the required information is given in the financial statements or notes thereto.
 
(3)         Exhibits
Exhibit No.
 
Description
3.1
 
Second Amended and Restated Certificate of Incorporation (filed as exhibit 3.1 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference)
 
 
 
3.2
 
Amended and Restated Bylaws (filed as exhibit 3.2 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference)
 
 
 
4.1
 
Specimen certificate evidencing shares of common stock (filed as exhibit 4.1 to Registration Statement on Form S-1 (Amendment No. 5) filed on September 23, 2009 (Registration No. 333-151559) and incorporated herein by reference.
 
 
 
10.1
 
Third Amended and Restated Credit Agreement dated December 21, 2011 (filed as exhibit 10.1 to Quarterly Report on Form 10-Q filed April 9, 2012 and incorporated herein by reference)
 
 
 
10.2
 
Third Amendment and Modification Agreement, dated October 31, 2014 to the Third Amended and Restated Credit Agreement, dated December 21, 2011 (filed as exhibit 10.1 to Quarterly Report on Form 10-Q filed January 9, 2015 and incorporated herein by reference)
 
 
 
10.3
 
Form of Indemnification Agreement for directors and officers (filed as exhibit 10.1 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference)
 
 
 
10.4
 
Employment Agreement between the Company and Sotirios J. Vahaviolos (filed as exhibit 10.4 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference)
 
 
 
10.5
 
Amendment, dated July 14, 2010 to Employment Agreement, between the Company and Sotirios J. Vahaviolos (filed as exhibit 10.1 to Quarterly Report on Form 10-Q filed on October 14, 2010 and incorporated herein by reference)
 
 
 
10.6
 
Amendment No. 2, dated January 24, 2014, to Employment Agreement between the Company and Sotirios J. Vahaviolos (filed as exhibit 10.1 to Quarterly Report on Form 10-Q filed on April 9, 2014 and incorporated herein by reference)
 
 
 
10.7
 
2007 Stock Option Plan and form of Stock Option Agreement (filed as exhibit 10.5 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference)
 
 
 
10.8
 
2009 Long-Term Incentive Plan (filed as exhibit 10.6 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference).
 
 
 
10.9
 
Form of 2009 Long-Term Incentive Plan Stock Option Agreement (filed as exhibit 10.7 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference)
 
 
 
10.10
 
Form of 2009 Long-Term Incentive Plan Restricted Stock Agreement (filed as exhibit 10.8 to Registration Statement on Form S-1 (Amendment No. 4) filed on September 21, 2009 (Registration No. 333-151559) and incorporated herein by reference)

77


 
 
 
10.11
 
Form of Restricted Stock Unit Certificate for awards under 2009 Long-Term Incentive Plan (filed as exhibit 10.1 to Quarterly Report on Form 10-Q filed on January 13, 2011 and incorporated herein by reference)
 
 
 
10.12
 
Form of performance share unit awards letter under 2009 Long-Term Incentive Plan (filed as exhibit 10.11 to Annual Report on Form 10-K filed on August 8, 2014 and incorporated herein by reference)
 
 
 
10.13
 
Mistras Group Severance Plan as amended (April 2014) (filed as Exhibit 10.12 to Annual Report on Form 10-K filed on August 8, 2014 and incorporated herein by reference)
 
 
 
10.14
 
Description of Compensation for Non-Employee Directors (Fiscal 2015) (filed as exhibit 10.13 to Annual Report on Form 10-K filed on August 8, 2014 and incorporated herein by reference)
 
 
 
21.1*
 
Subsidiaries of the Registrant
 
 
 
23.1*
 
Consent of KPMG LLP
 
 
 
24.1*
 
Power of Attorney (included as part of the signature page to this report)
 
 
 
31.1*
 
Certification of Chief Executive Officer pursuant to Rule 13a-14(a) under the Securities Exchange Act of 1934
 
 
 
31.2*
 
Certification of Chief Financial Officer pursuant to Rule 13a-14(a) under the Securities Exchange Act of 1934
 
 
 
32.1**
 
Certification pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
 
32.2**
 
Certification pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
 
101.INS***
 
XBRL Instance Document
 
 
 
101.SCH***
 
XBRL Schema Document
 
 
 
101.CAL***
 
XBRL Calculation Linkbase Document
 
 
 
101.LAB
 
XBRL Labels Linkbase Document
 
 
 
101.PRE***
 
XBRL Presentation Linkbase Document
 
 
 
101.DEF***
 
XBRL Definition Linkbase Document
_______________________
Exhibits 10.3 to 10.14 are management contracts or compensatory plans, contracts, or arrangements.
* Filed herewith.
** Furnished herewith.
*** Users of this data are advised that, pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability under these sections.



78


SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
MISTRAS GROUP, INC.
 
By:
/s/ DR. SOTIRIOS J. VAHAVIOLOS
 
Dr. Sotirios J. Vahaviolos
 
Chairman and Chief Executive Officer
 
Date: August 15, 2016
 
We, the undersigned directors and officers of Mistras Group, Inc., hereby severally constitute Dr. Sotirios J. Vahaviolos, Jonathan H. Wolk and Michael C. Keefe, and each of them singly, as our true and lawful attorneys with full power to each of them to sign for us, in our names in the capacities indicated below, any and all amendments to this Annual Report on Form 10-K filed with the Securities and Exchange Commission.
 
This power of attorney may only be revoked by a written document executed by the undersigned that expressly revokes this power by referring to the date and subject hereof.
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
 
Signature
 
Title
 
Date
 
 
 
 
 
/s/Dr. Sotirios J. Vahaviolos
 
Chairman and Chief Executive
Officer (Principal Executive Officer) 
and Director
 
August 15, 2016
Dr. Sotirios J. Vahaviolos
 
 
 
 
 
 
 
 
 
 
 
 
/s/ Jonathan H. Wolk
 
Senior Executive Vice President, Chief Financial
Officer and Treasurer (Principal Financial and
Accounting Officer)
 
August 15, 2016
Jonathan H. Wolk
 
 
 
 
 
 
 
 
 
 
 
 
/s/ James J. Forese
 
Director
 
August 15, 2016
James J. Forese
 
 
 
 
 
 
 
 
 
/s/ Richard H. Glanton
 
Director
 
August 15, 2016
Richard H. Glanton
 
 
 
 
 
 
 
 
 
/s/ Nicholas DeBenedictis
 
Director
 
August 15, 2016
Nicholas DeBenedictis
 
 
 
 
 
 
 
 
 
/s/ Michael J. Lange
 
Director
 
August 15, 2016
Michael J. Lange
 
 
 
 
 
 
 
 
 
/s/ Manuel N. Stamatakis
 
Director
 
August 15, 2016
Manuel N. Stamatakis
 
 
 
 
 
 
 
 
 
/s/ W. Curtis Weldon
 
Director
 
August 15, 2016
W. Curtis Weldon
 
 
 
 


79