U.S. SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

x ANNUAL REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2015

Commission file number 0-12183

4 Manhattanville Road, Suite 106, Purchase, NY 10577

(Address of principal executive offices)

(914) 468-4009

(Issuer's telephone number)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered under Section 12(g) of the Exchange Act:

None

Indicate by check mark if the Company is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes: o No x

Indicate by check mark if the Company is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes: o No x

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act of 1934 during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes: x No o

Indicate by check mark whether the registrant submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (para 232.405 of this chapter) during the preceding 12 months ( or for such shorter period that the registrant was required to submit and post such files). Yes: x No o

Indicate by checkmark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of "large accelerated filer", "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes: o No x

The aggregate market value of the voting stock held by non-affiliates computed by reference to the price at which the stock was sold, or the average bid and asked prices of such stock, as of June 30, 2015, the registrant's most recently completed second fiscal quarter, was approximately $59,780,649.

The number of shares of the registrant's $.001 par value common stock outstanding on the NYSE MKT exchange as of March 16, 2016 was 27,051,172.

Company Symbol-BVX

Company SIC (Standard Industrial Code)-3841

DOCUMENTS INCORPORATED BY REFERENCE

None.

Bovie Medical Corporation

2015 Form 10-K Annual Report

Table of Contents

BOVIE MEDICAL CORPORATION

Cautionary Notes Regarding "Forward-Looking" Statements

This report contains statements that we believe to be "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements give our current expectations or forecasts of future events. Forward-looking statements generally can be identified by the use of forward-looking terminology such as "may," "will," "expect," "intend," "estimate," "anticipate," "believe," "project," or "continue," or similar words or the negative thereof. From time to time, we also may provide oral or written forward-looking statements in other materials we release to the public. Any or all of our forward-looking statements in this report and in any public statements we make could be materially different from actual results. They can be affected by assumptions we might make or by known or unknown risks or uncertainties. Consequently, we cannot guarantee any forward-looking statements. Investors are cautioned not to place undue reliance on any forward-looking statements. Investors should also understand that it is not possible to predict or identify all such factors and should not consider the risk factors discussed in Item 1A below to be a complete statement of all potential risks and uncertainties. Past performance is no guaranty of future results.

Part I

ITEM 1. Business

General

Bovie Medical Corporation ("Company", "Bovie Medical", "we", "us", or "our") was incorporated in 1982, under the laws of the State of Delaware and has its principal executive office at 4 Manhattanville Road, Suite #106, Purchase, New York 10577.

We are an energy-based medical device company specializing in developing, manufacturing, and marketing a range of electrosurgical products and technologies, as well as related medical products used in doctor's offices, surgery centers and hospitals worldwide. Our medical devices are marketed through Bovie's own well-respected brands (Bovie^Ò, IDS^™ and ICON^™) and on a private label basis to distributors throughout the world. The Company also leverages its expertise in the design, development and manufacturing of electrosurgical equipment by producing equipment for large, well-known medical device manufacturers through original equipment manufacturing (OEM) agreements, as well as start-up companies with the need for our energy based designs.

We are also the developer of J-Plasma^Ò; a patented helium-based plasma surgical product which we believe has the potential to be a transformational product for surgeons. J-PlasmaÒ has FDA clearance for the cutting, coagulation, and ablation of soft tissue. The J-PlasmaÒ system consists of an electrosurgical generator unit (ESU), a handpiece and a supply of helium gas. Radiofrequency (RF) energy is delivered to the handpiece by the ESU and used to energize an electrode. When helium gas is passed over the energized electrode, a helium plasma is generated which allows for conduction of the RF energy from the electrode to the patient in the form of a precise helium plasma beam. The energy delivered to the patient via the helium plasma beam is very precise and cooler in temperature in comparison to other surgical energy modalities such as standard RF monopolar energy.While currently in the early stages of commercialization, J-Plasma has been the subject of ten white papers and has been cited therein for its clinical utility in gynecological and plastic surgery procedures.

Significant Subsidiaries

Aaron Medical Industries, Inc. is a wholly-owned Florida corporation based in Clearwater, Florida. It is principally engaged in the business of marketing our medical products.

Bovie Bulgaria, EOOD is a wholly-owned limited liability company incorporated under Bulgarian law, located in Sofia, Bulgaria. It is engaged in the business of engineering and manufacturing our electrosurgical and OEM products.

Industry

Healthcare reform has caused consolidation among providers, with hospitals merging, physician practices joining hospitals, and institutions combining to form Accountable Care Organizations, to manage patients on an interdisciplinary basis. Although the medical device industry can be challenging and very competitive, we believe it will continue to have a positive, long-term growth trajectory with the number of surgical procedures performed increasing annually as a result of the aging "baby boomer" population and other healthcare trends. Additionally, we also anticipate a continued increase in minimally invasive surgical procedures due to ongoing advancements in technology coupled with continued overall pressure to reduce healthcare costs via a reduction in patient trauma and recovery time. Expanding global markets will also continue to provide growth opportunities for the medical device industry.

We believe that Bovie Medical has sustainable, competitive advantages in the medical device market for several reasons. We have a long history in electrosurgery. In fact, our inspiration dates back to the first use of an electrosurgical generator in an operating room in the U.S. in 1926 where Dr. William T. Bovie was present. Thus, the Bovie name is recognized by surgeons the world over for having pioneered the electrosurgery field and is recognized for its outstanding product quality supported by strong engineering and research and development capabilities. This history equates to very strong recognition of the Bovie brand. In fact, the word "Bovie" has become synonymous with all instruments used to deliver electrosurgical energy in the operating room. We believe that our equipment and devices have and will continue to provide better experiences for patients at a lower cost to the healthcare system.

Business Strategy

Our objective is to achieve profitable, sustainable growth by increasing our market share in the advanced energy category, including the commercialization of products that have the potential to be transformational with respect to the results they produce for surgeons and patients. In order to achieve this objective, we plan to leverage our long history in the industry, along with the reputation for quality and reliability that the Bovie brand enjoys within the medical community. At the same time, we will expand our products beyond radio frequency, move forward with research and developments projects aimed at creating value within our existing product portfolio and build our pipeline of new complementary products and utilize multiple channels to bring new and existing products to market.

We are working to build our position in advanced electrosurgical generators and disposables, which can be used in diversified niche markets with minimally invasive surgical instruments, while furthering our status as a pioneer in plasma technology and its various medical applications.

Our J-Plasma product initially received FDA clearance in 2012, and a CE mark in December, 2014, which enables us to sell the product in Europe. In 2014, we brought together a new management team and created and trained a direct sales force dedicated to J-PlasmaÒ. In 2015, we continued the commercialization process for J-Plasma with a multi-faceted strategy designed to accelerate adoption of the product. This strategy primarily involved deployment of a dedicated sales force, extending and customizing the J-PlasmaÒ product line and expanding the surgical specialties in which J-PlasmaÒ can become the "standard of care" for certain procedures.

By the end of 2015, we had 13 field-based selling professionals and a network of 26 independent manufacturing representatives, resulting in a total sales force of 39. This is a hospital based selling organization with its focus on the use of J-Plasma for operating room procedures.

Additionally, we launched six new J-Plasma hand piece configurations and the Bovie Ultimate generator, which combines J-Plasma functionality with standard electrosurgery modes in one generator. The Bovie Ultimate was recognized by the Society of Laparoendoscopic Surgeons (SLS) as an Innovative Product of the Year at their annual meeting in September 2015, following a similar recognition in 2014. As a result of our sales, marketing and product development initiatives in 2015, we have significantly increased the number of surgeons using the product, gained approvals for the sale of J-PlasmaÒ from Hospital Value Analysis Committees and signed agreements for the use of J-PlasmaÒ by the members of Group Purchasing Organizations that serve the medical community.

In order to assist us in leveraging J-Plasma's precision and effectiveness in multiple surgical specialties, we launched a Medical Advisory Board in 2015 currently comprised of surgeons who are recognized leaders in urology, cardiovascular and cardiothoracic surgery.

We are continuing to make substantial investments in the development and marketing of our J-Plasma technology for the long term benefit of the Company and its stakeholders and this may adversely affect our short term profitability and cash flow, particularly over the next 12 to 24 months. While we believe that these investments have the potential to generate additional revenues and profits in the future, there can be no assurance that J-Plasma will be successful or that such future revenues and profitability will be realized. From June of 2010 through December 31, 2014, we invested approximately $5.5 million in the development and marketing of our J-Plasma technology and an additional approximately $5.5 million in 2015, bringing the total investment to approximately $11.0 million since inception.

Company Products

We group our products into three main categories: electrosurgery, cauteries, and other products. Information regarding sales by product categories and related percentages can be found in our annual and quarterly reports filed with the SEC. We manufacture and market various medical products, both under private label and the Bovie brands (Bovie, IDS, ICON and DERM), to distributors worldwide. Additionally, Bovie has original equipment manufacturing (OEM) agreements with other medical device manufacturers. These OEM and private label arrangements and our use of the Bovie brands enable us to gain greater market share for the distribution of our products.

Electrosurgery Products

Electrosurgery is our largest product line and includes desiccators, generators, electrodes, electrosurgical pencils and various ancillary disposable products. These electrosurgical products are used during surgical procedures in gynecology, urology, plastic surgery, dermatology, veterinary, and other surgical markets for the cutting and coagulation of tissue. It is estimated that 80% of all surgical procedures performed worldwide are conducted by electrosurgery. Our electrosurgery products fall under two categories, monopolar and bipolar. Monopolar products require the use of a grounding pad attached to the patient for the return of the electrical current, while bipolar products consist of two electrodes; one for the inbound current and one for the return current and therefore do not require the use of a grounding pad.

DERM101 and DERM 102

These effective and economical 10 watt high frequency desiccators provide a low wattage platform for minor in-office skin procedures. We designed these products specifically for family practice physicians, pediatricians and other general practitioners, enabling them to perform simple skin procedures in their offices instead of referring the patient to a specialist saving the patient time and providing additional revenue generating procedures for the physician.

Aaron 940/ Aaron 950 / Aaron 1250U

The Aaron 940 is a Bovie developed, low powered 40-watt high frequency desiccator designed primarily for dermatology and family practice physicians. The units are used mainly for removing small skin lesions and growths as well as for coagulation for office based procedures.

The Aaron 950 is a 60-watt high frequency desiccator with the added feature of a cut capacity for outpatient surgical procedures. In effect, the 950 is two independent surgical devices in one small package. It is designed mainly for use in doctors' offices and is utilized in a broad range of specialties including dermatology, gynecology, family practice, urology, plastic surgery and ophthalmology.

The Aaron 1250U is a 120-watt multipurpose electrosurgery generator. The unit features monopolar and bipolar functions with pad sensing. This product is considered to be ideally suited for office-based procedures in the specialties of gynecology, plastic surgery and urology.

Aaron 2250 /2350/ 3250/3350 and IDS 200 /210/ 300 /310 400

To address market demand for more powerful electrosurgical generators, Bovie developed 200, 300 and 400-watt multipurpose digital electrosurgery generators designed for the rapidly expanding surgi-center market and the hospital outpatient and inpatient markets. This equipment includes digital hardware that enables very high parallel data processing throughout the operation or procedure. All data is sampled and processed digitally. For the first time in electrosurgery, surgeons are able to measure tissue impedance in real time (5,000 times a second) thanks to the utilization of digital technology. The design of these units is based on a digital feedback system. By using dedicated digital hardware in place of a general purpose controller for processing data, our equipment enables the power to be adjusted as the impedance varies, to deliver a consistent clinical effect.

The IDS 200/Aaron 2250 are 200-watt generators that have the capability to be used in the majority of procedures performed today in surgi-center or outpatient settings. Although 200 watts is adequate to do most procedures in the operating room, 300 watts is considered the standard and believed to be what most hospitals and surgi-centers will require. To meet this requirement, we developed the IDS 300/ Aaron 3250.

IDS 310/210 and Bovie OR|Pro A3350 and Surgicenter Pro A2350 are the next generation of surgi-center and operating room generators. These units incorporate the best features of the IDS 300 and upgrade its capabilities by providing additional bipolar options, including the 225-watt Bovie bipolar and an auto bipolar feature. The 300 watt units also offer the capability to utilize two pencils with simultaneous activation in fulguration mode.

The Bovie IDS 400 is a 400-watt generator designed primarily for sale in markets outside of the United States. These units feature both monopolar and bipolar functions, have pad and tissue sensing, and include nine blended cutting settings.

Electrosurgical Disposables

Resistick™ II

Resistick II is a trademarked and proprietary coating that is applied to stainless steel that resist eschar (scab or scar tissue caused by burning) during surgery. We have experienced strong demand for this product since its introduction in 2011, and it represents our continued expansion of the Bovie line of electrosurgical disposables.

Disposable Laparoscopic Electrodes

We have introduced a line of disposable laparoscopic electrodes in Resistick coated and stainless steel for use by physicians from a broad group of specialties including gynecology, general surgery and urology. These electrodes are offered in J-hook, L-hook, needle, ball and spatula design and have an adapter included which makes these laparoscopic electrodes usable with a 3/32" or 4mm plug.

Cauteries

Battery Operated Cauteries

Battery operated cauteries constitute our second largest product line. Cauteries were originally designed for precise hemostasis (to stop bleeding) in ophthalmology. The current use of cauteries has been substantially expanded to include a broad range of applications. Battery operated cauteries are primarily sterile one-time use products. We have continued to improve our offering and now have a snap design cautery which has a patent pending. It features a switch mechanism that dramatically reduces the potential for accidental activation. We manufacture one of the broadest lines of cauteries in the world, including but not limited to, a line of replaceable battery and replaceable tip cauteries, which are popular in veterinary and overseas markets.

Other Products

Battery Operated Medical Lights

We manufacture and market a variety of specialty lighting instruments for use in ophthalmology as well as distribute specialty lighting instruments for general surgery, hip replacement surgery and for the placement of endotracheal tubes in emergency and surgical procedures. We also manufacture and market physicians' office use penlights used in physician offices.

Nerve Locator Stimulator

We manufacture a nerve locator stimulator primarily used for identifying motor nerves in hand and facial reconstructive surgery. This instrument is a sterile, self-contained, battery-operated unit, for one time use.

J-Plasma Products

ICON GS

Bovie's J-Plasma technology is the foundation for the ICON GS plasma system, which utilizes a helium ionization process producing a stable thin focused beam of ionized gas that can be controlled in a wide range of temperatures and intensities, providing the surgeon greater control and predictability with minimal thermal damage to surrounding tissue. The development of this helium plasma generator also includes the design of a new proprietary handpiece.

In March 2015, we launched The BovieÒ Ultimate™ generator. The Bovie Ultimate is a high frequency electrosurgical generator that can be used for delivery of RF energy and/or helium gas plasma to cut, coagulate and ablate soft tissue during open and laparoscopic surgical procedures. The generator offers users monopolar, bipolar and J-Plasma features in a single generator. It has both FDA clearance and CE Mark.

J-Plasma Disposable Portfolio

We offer different hand pieces for open and laparoscopic procedures. The helium-based plasma generated from these devices have been shown to cause less thermal damage to tissue than CO₂ laser, argon plasma and RF energy products currently available on the market. The technology has a general indication and can be used for cutting, coagulating and ablating soft tissue. The two primary specialties that are targeted in phase one of the product launch are gynecology and plastic surgery. However, given the wide range of tissue applications for J-Plasma, we are now engaged in ongoing development to create products for urology, cardiovascular, and cardiothoracic procedures. The advantages of helium plasma continue to be studied throughout the medical and scientific communities. We believe that surgical applications are just one area of opportunity for this technology.

In September of 2015, we expanded our offering of laparoscopic hand pieces by introducing the J-Plasma Precise™ configurations to the market. The six new J-Plasma Precise™ configurations include three new lengths with either a blade or needle electrode with an ergonomic, pistol grip design. These new configurations expand the procedure base for J-Plasma by providing surgeons with the tools they need to access additional anatomic locations.

Research and Development and New Products

Our research and development activities are an essential component of our efforts to develop innovative products for introduction in the marketplace to drive sales growth. We continue to emphasize the development of proprietary products and product improvements to complement and expand our existing product lines. In 2015, we spent approximately $2,160,000 in R&D versus approximately $1,416,000 during the same period of 2014, an increase of approximately 52.5%. Bovie products introduced to the market in 2015 as a result of our internal research and development opportunities include: The BovieÒ Ultimate™ generator, J-Plasma Precise™ hand pieces and multiple new electrosurgical generators for OEM customers.

Sales & Marketing

The majority of our core products are marketed through medical distributors, which distribute to more than 6,000 hospitals and to doctors and other healthcare facilities. New distributors are contacted through responses to our advertising in international and domestic medical journals and our presence at domestic and international trade shows. International sales represented approximately 16.9% of total revenues in 2015, compared to approximately 15.8% in 2014. Management estimates our products have been sold in more than 150 countries through local dealers coordinated by sales and marketing personnel at our Clearwater, Florida facility.

Competition

We compete with numerous manufacturers and distributors of medical supplies and devices, many of which are large and well-established. With the exception of J-Plasma and endoscopic instrumentation, which are sold directly to the end-user under our own brand, many of our products are private labeled. The majority of the products in our core business are sold through distributors under the Bovie or Aaron label. The balance is private labeled for major distributors who sell it under their own name. By having private labeled and branded distribution, we are able to increase our position in the marketplace and compete with much larger organizations. While our private label customers distribute products through their internal sales force, the majority of our products are sold through distributors which increases our sales potential and helps level the playing field relative to our large competitors that sell direct. Domestically, we continue to believe that we have a substantial market share in the field of electrosurgical generator manufacturing through our Bovie branded and OEM units.

Our main competitors in electrosurgical and accessory markets are Valleylab (a division of Covidien), Conmed and Erbe Electromedizine. In the battery operated cautery market, our main competitor is Beaver Visitec, and in the endoscopic instrumentation market, it is Ethicon (a division of Johnson and Johnson) and Covidien Surgical Solutions (formally U.S. Surgical, a division of Covidien). Currently, we are the only company with helium-based plasma and retractable blade products. However, there are argon plasma competitors, Conmed, and CO₂ laser competitors for our target market. We believe our competitive position did not change in 2015.

Intellectual Property

We rely on our intellectual property that we have developed or acquired over the years including patents, trade secrets, technical innovations, and various licensing agreements to provide our future growth and build our competitive position. We have been issued 30 patents in the United States and 18 foreign patents. We have 16 pending patent applications in the United States and 14 pending foreign applications. Our intellectual property portfolio for the technology and products related to J-Plasma product is included in these totals and continues to grow. Specific to J-Plasma, we have been issued 14 U.S. and 8 foreign patents, and we have 10 U.S. and 4 foreign applications pending. As we continue to expand our intellectual property portfolio we believe it is critical for us to continue to invest in filing patent applications to protect our technology, inventions, and improvements. However, we can give no assurance that competitors will not infringe on our patent rights or otherwise create similar or non-infringing competing products that are technically patentable in their own right.

Manufacturing and Suppliers

We are committed to producing the most technically advanced and highest quality products of their kind available on the market. We manufacture the majority of our products on our premises in Clearwater, Florida and at our facility located in Sofia, Bulgaria, which are certified under the ISO international quality standards and are subject to continuing regulation and routine inspections by the FDA to ensure compliance with regulations relating to our quality system, medical device complaint reporting, and adherence to FDA restrictions on promotion and advertising. In addition, we are subject to regulations under the Occupational Safety and Health Act, the Environmental Protection Act and other federal, state and local regulations.

During the fourth quarter of 2015, we acquired all of the outstanding shares of Bovie Bulgaria, EOOD. Bovie Bulgaria operates a 16,000 square foot ISO13485 certified and FDA registered manufacturing facility located in the capital city of Sofia, which houses manufacturing, development and assembly operations.

We also have collaborative arrangements with three foreign suppliers under which we request the development of certain items and components, which we purchase pursuant to purchase orders. Our purchase order commitments are never more than one year in duration and are supported by our sales forecasts.

Customers

We sell the majority of our current products through major distributors which include Cardinal Health, Independent Medical Co-Op Inc. (IMCO), McKesson Medical Surgical, Inc., Medline, National Distribution and Contracting Inc. (NDC), and Owens & Minor and have manufacturing agreements for private label of certain products with these and others.

In 2015, we signed long-term agreements with three group purchasing organizations (GPO). We believe that partnering with GPO's is critical to our sales efforts and J-Plasma commercialization efforts.

Backlog

The value of unshipped factory orders is not material.

Employees

At December 31, 2015, we had 201 full-time employees world-wide, of whom 6 were executive officers, 31 supervisory personnel, 14 sales personnel, and 150 technical support, administrative, and production employees. None of our current employees are covered by a collective bargaining agreement, and we have never experienced a work stoppage. We consider our employee relations to be good.

ITEM 1A. Risk factors

In addition to risks and uncertainties in the ordinary course of business, important risk factors that may affect us are discussed below. Additional risks not presently known to us or that we currently believe are immaterial may also significantly impair our business operations.

Risks Related to Our Industry

The medical device industry is highly competitive and we may be unable to compete effectively.

The medical device industry is highly competitive. Many competitors in this industry are well-established, do a substantially greater amount of business, and have greater financial resources and facilities than we do.

Domestically, we believe we rank third in the number of units sold in the field of electrosurgical generator manufacturing and we sell our products and compete with other manufacturers in various ways. In addition to advertising, attending trade shows and supporting our distribution channels, we strive to enhance product quality and functionality, improve user friendliness, and expand product exposure.

We have also invested, and continue to invest, substantial resources to develop and monetize our J-Plasma technology. If we are unable to gain acceptance in the marketplace of J-Plasma, our business and results of operations may be materially and adversely affected. From June of 2010 through December 31, 2015, we have invested approximately $11.0 million in the development and marketing of our J-Plasma technology.

We also compete by private labeling our products for major distributors under their label. This allows us to increase our position in the marketplace and thereby compete from two different approaches, our Aaron or Bovie label, and our customers' private label. Our private label customers distribute our products under their name through their internal sales force. We believe our main competitors do not private label their products.

Lastly, at this time we sell the majority of our products through distributors. Many of the companies we compete with sell direct, thus competing directly with distributors they sometimes use.

Our industry is highly regulated by the U.S. Food and Drug Administration and international regulatory authorities, as well as other governmental, state and federal agencies which have substantial authority to establish criteria which must be complied with in order for us to continue in operation.

United States

Our products and research and development activities are subject to regulation by the FDA and other regulatory bodies. FDA regulations govern, among other things, the following activities:

In the United States, medical devices are classified on the basis of control deemed necessary to reasonably ensure the safety and effectiveness of the device. Class I devices are subject to general controls. These controls include registration and listing, labeling, pre-market notification and adherence to the FDA Quality System Regulation. Class II devices are subject to general and special controls. Special controls include performance standards, post market surveillance, patient registries and FDA guidelines. Class III devices are those which must receive pre-market approval by the FDA to ensure their safety and effectiveness. Currently, we only manufacture Class I and Class II devices. Pre-market notification clearance must be obtained for some Class I and most Class II devices when the FDA does not require pre-market approval. All of our products have been cleared by, or are exempt from, the pre-market notification process.

A pre-market approval application is required for most Class III devices. A pre-market approval application must be supported by valid scientific evidence to demonstrate the safety and effectiveness of the device. The pre-market approval application typically includes:

The pre-market approval process can be expensive, uncertain and lengthy. A number of devices for which pre-market approval has been sought by other companies have never been approved for marketing.

International Regulation

To market products in the European Union, our products must bear the "CE" mark. Manufacturers of medical devices bearing the CE mark have gone through a conformity assessment process that assures that products are manufactured in compliance with a recognized quality system and to comply with the European Medical Devices Directive.

Each device that bears a CE mark has an associated technical documentation that includes a description of the following:

Manufacturing and distribution of a device is subject to ongoing surveillance by the appropriate regulatory body to ensure continued compliance with quality system and reporting requirements.

We began CE marking of devices for sale in the European Union in 1999. In addition to the requirement to CE mark, each member country of the European Union maintains the right to impose additional regulatory requirements.

Outside of the European Union, regulations vary significantly from country to country. The time required to obtain approval to market products may be longer or shorter than that required in the United States or the European Union. Certain European countries outside of the European Union do recognize and give effect to the CE mark certification. We are permitted to market and sell our products in those countries.

If we are unable to successfully introduce new products or fail to keep pace with competitive advances in technology, our business, financial condition and results of operations could be adversely affected. In addition, our research and development efforts rely upon investments and alliances, and we cannot guarantee that any previous or future investments or alliances will be successful.

Our research and development activities are an essential component of our efforts to develop new and innovative products for introduction in the marketplace. New and improved products play a critical role in our sales growth. We continue to place emphasis on the development of proprietary products, such as our J-Plasma technology, and product improvements to complement and expand our existing product lines. We maintain close working relationships with physicians and medical personnel in hospitals and universities who assist in product research and areas of development. Our research and development activities are primarily conducted internally and are expensed as incurred. These expenses include direct expenses for wages, materials and services associated with the development of our products net of any reimbursements from customers. Research and development expenses do not include any portion of general and administrative expenses. Our Clearwater, Florida facility has been our flagship research and design location. We expect to continue making future investments to enable us to develop and market new technologies and products to further our strategic objectives and strengthen our existing business. However, we cannot guarantee that any of our previous or future investments will be successful or that our new products such as J-Plasma, will gain market acceptance, the failure of which would have a material adverse effect on our business and results of operations.

The amount expended by us on research and development of our products during the years 2015, 2014, and 2013, totaled approximately $2.1, $1.4, and $1.3 million, respectively. During the past three years, we invested substantial resources in the development and marketing of our J-Plasma technology. We have not incurred any direct costs relating to environmental regulations or requirements. For 2016, we expect the amount of our expenditures for research and development activities to increase modestly when compared to 2015.

Even if we are successful in developing and obtaining approval for our new product candidates, there are various circumstances that could prevent the successful commercialization of the products.

Our ability to successfully commercialize our products will depend on a number of factors, any of which could delay or prevent commercialization, including:

The failure to successfully acquire or develop and commercialize new products will have a material and adverse effect on the future growth of our business, financial condition and results of operations.

Our international operations subject us to foreign currency fluctuations and other risks associated with operating in foreign countries.

We operate internationally and enter into transactions denominated in foreign currencies. To date, we have not hedged our exposure to changes in foreign currency exchange rates, and as a result, we are subject to foreign currency transaction and translation gains and losses. We purchase goods and services in U.S. dollars and Euros. Foreign exchange risk is managed primarily by satisfying foreign denominated expenditures with cash flows or assets denominated in the same currency therefore we are subject to some foreign currency fluctuation risk. Our currency value fluctuations were not material for 2015.

Our operations and cash flows may be adversely impacted by healthcare reform legislation.

The Patient Protection and Affordable Care Act and Health Care and Education Affordability Reconciliation Act were enacted into law in the U.S. in March 2010. Among other initiatives, this legislation imposes a 2.3% excise tax on domestic sales of class I, II, and III medical devices beginning in 2013. The Consolidated Appropriations Act, 2016, signed into law on Dec. 18, 2015, includes a two year moratorium on the medical device excise tax imposed by Internal Revenue Code section 4191. Thus, the medical device excise tax does not apply to the sale of a taxable medical device by the manufacturer, producer, or importer of the device during the period beginning on Jan. 1, 2016, and ending on Dec. 31, 2017. Substantially all of our products are class I or class II medical devices and in 2015 and 2014 we paid medical device excise tax of approximately $450,378 and $435,926, respectively. As approximately 83% of our 2015 sales were derived in the U.S. we cannot predict if any additional regulations will be implemented at the federal or state level, or the effect of any future legislation or regulation in the U.S. or internationally.

Our operations may experience higher costs to produce our products as a result of changes in prices for oil, gasoline, and other commodities.

We use some plastics and other petroleum-based materials along with precious metals contained in electronic components as raw materials in many of our products. Prices of oil and gasoline also significantly affect our costs for freight and utilities. Oil, gasoline and precious metal prices are volatile and may increase, resulting in higher costs to produce and distribute our products. Due to the highly competitive nature of the healthcare industry and the cost-containment efforts of our customers we may be unable to pass along cost increases through higher prices. If we are unable to fully recover these costs through price increases or offset through other cost reductions, our results of operations could be materially and adversely affected.

Our manufacturing facilities are located in Clearwater, Florida and could be affected due to multiple risks from fire, hurricanes, physical changes in the planet due to climate change, and similar phenomena.

Our manufacturing facilities are located in Clearwater, Florida and could be affected by multiple weather risks, most notably hurricanes. Although we carry property and casualty insurance and business interruption insurance, future possible disruptions of operations or damage to property, plant and equipment due to hurricanes or other weather risks could result in impaired production and affect our ability to meet our commitments to our customers and impair important business relationships, the loss of which could adversely affect our operations and profitability. We do however maintain a backup generator at our Clearwater facility and a disaster recovery plan is in place to help mitigate this risk.

We do not produce hazardous materials or emissions that would adversely impact the environment. We do however, have air conditioning units and consume electricity which could be impacted by climate change in the form of increased rates. However, we do not believe the increase in expense from any rate increases, as a percentage of sales, would be material in the near term.

Risks Relating to Our Business

We have historically done a substantial amount of business with seven of our top ten customers, who are also major distributors of our product, which as a group have produced substantial revenues for our Company. Loss of business from a major customer will likely materially and adversely affect our business.

We manufacture the majority of our products on our premises in Clearwater, Florida and in Sofia, Bulgaria. Labor-intensive sub-assemblies and labor-intensive products may be out-sourced to our specification. Although we sell through distributors, we market our products through national trade journal advertising, direct mail, distributor sales representatives and trade shows, under the Bovie name, the Bovie/Aaron name and private label. Major distributors include Cardinal Health, Independent Medical Co-Op Inc. (IMCO), McKesson Medical Surgical, Inc., Medline, National Distribution and Contracting Inc. (NDC), and Owens & Minor. If any of these distributor relationships are terminated or not replaced, our revenue from the territories served by these distributors could be adversely affected.

We are also dependent on OEM customers who have no legal obligation to purchase products from us. Should such customers fail to give us purchase orders for the product after development, our future business and value of related assets could be negatively affected. Furthermore, no assurance can be given that such customers will give sufficient high priority to our products. Finally, disagreements or disputes may arise between us and our customers, which could adversely affect production and sales of our products.

We rely on certain suppliers and manufacturers for raw materials and other products and are vulnerable to fluctuations in the availability and price of such products and services.

Fluctuations in the price, availability, and quality of the raw materials we use in our manufacturing could have a negative effect on our cost of sales and our ability to meet the demands of our customers. Inability to meet the demands of our customers could result in the loss of future sales.

In addition, the costs to manufacture our products depend in part on the market prices of the raw materials used to produce them. We may not be able to pass along to our customers all or a portion of our higher costs of raw materials due to competitive and marketing pressures, which could decrease our earnings and profitability.

We also have collaborative arrangements with three key foreign suppliers under which we request the development of certain items and components and we purchase them pursuant to purchase orders. Our purchase order commitments are never more than one year in duration and are supported by our sales forecasts. The majority of our raw materials are purchased from sole-source suppliers. While we believe we could ultimately procure other sources for these components, should we experience any significant disruptions in this key supply chain, there are no assurances that we could do so in a timely manner which could render us unable to meet the demands of our customers, resulting in a material and adverse effect on our business and operating results.

If we are unable to protect our patents or other proprietary rights, or if we infringe on the patents or other proprietary rights of others, our competitiveness and business prospects may be materially damaged.

We have been issued 30 patents in the United States and 18 foreign patents. We have 16 pending patent applications in the United States and 14 pending foreign applications. Our intellectual property portfolio for the technology and products related to J-Plasma product is included in these totals and continues to grow. Specific to J-Plasma, we have been issued 14 U.S. and 8 foreign patents, and we have 10 U.S. and 4 foreign applications pending. We intend to continue to seek legal protection, primarily through patents, for our proprietary technology. Seeking patent protection is a lengthy and costly process, and there can be no assurance that patents will be issued from any pending applications, or that any claims allowed from existing or pending patents will be sufficiently broad or strong to protect our proprietary technology. There is also no guarantee that any patents we hold will not be challenged, invalidated or circumvented, or that the patent rights granted will provide competitive advantages to us. Our competitors have developed and may continue to develop and obtain patents for technologies that are similar or superior to our technologies. In addition, the laws of foreign jurisdictions in which we develop, manufacture or sell our products may not protect our intellectual property rights to the same extent as do the laws of the United States.

Adverse outcomes in current or future legal disputes regarding patent and other intellectual property rights could result in the loss of our intellectual property rights, subject us to significant liabilities to third parties, require us to seek licenses from third parties on terms that may not be reasonable or favorable to us, prevent us from manufacturing, importing or selling our products, or compel us to redesign our products to avoid infringing third parties' intellectual property. As a result, our product offerings may be delayed, and we may be unable to meet customers' requirements in a timely manner. Regardless of the merit of any related legal proceeding, we have incurred in the past and may be required to incur in the future substantial costs to prosecute, enforce or defend our intellectual property rights. Even in the absence of infringement by our products of third parties' intellectual property rights, or litigation related to trade secrets, we have elected in the past and may in the future elect to enter into settlements to avoid the costs and risks of protracted litigation and the diversion of resources and management's attention. However, if the terms of settlements entered into with certain of our competitors are not observed or enforced, we may suffer further costs and risks. Any of these circumstances could have a material adverse effect on our business, financial condition and resources or results of operations.

Our ability to develop intellectual property depends in large part on hiring, retaining and motivating highly qualified design and engineering staff with the knowledge and technical competence to advance our technology and productivity goals. To protect our trade secrets and proprietary information, generally we have entered into confidentiality agreements with our employees, as well as with consultants and other parties. If these agreements prove inadequate or are breached, our remedies may not be sufficient to cover our losses.

We have been and may in the future become subject to litigation proceedings that could materially and adversely affect our business.

Other Litigation

In addition to the litigation risks and proceedings mentioned below, we have recently been involved and may in the future become subject to legal claims or proceedings related to securities, employment, customer or third party contracts, environmental regulations, or other matters. The costs involved in defending these claims have been substantial, which have had an adverse effect on our profitability. In addition, if other claims are asserted against us, we may be required to defend against such claims, or deem it necessary or advisable to initiate a legal proceeding to protect our rights, the expense and distraction of such a claim or proceeding, whether or not resolved in our favor, could materially and adversely affect our business, financial condition and operating results. Further, if a claim or proceeding were resolved against us or if we were to settle any such dispute, we may be required to pay damages and costs or refrain from certain activities, any of which could have a material adverse impact on our business, financial condition and operating results.

Intellectual Property Litigation or Trade Secrets

We have in the past, experienced certain allegations of infringement of intellectual property rights and use of trade secrets and may receive other such claims, with or without merit, in the future. Previously, claims of infringement of intellectual property rights have sometimes evolved into litigation against us, and they may continue to do so in the future. It is inherently difficult to assess the outcome of litigation. Although we believe we have had adequate defenses to these claims and that the outcome of the litigation will not have a material adverse impact on our business, financial condition, or results of operations, there can be no assurances that we will prevail. Any such litigation could result in substantial cost to us, significantly reduce our cash resources, and create a diversion of the efforts of our technical and management personnel, which could have a material and adverse effect on our business, financial condition and operating results. If we are unable to successfully defend against such claims, we could be prohibited from future sales of the allegedly infringing product or products, which could materially and adversely affect our future growth.

Product Liability Litigation

Although we carry liability insurance, due to the nature of our products and their use by professionals, we may, from time to time, be subject to litigation from persons who sustain injury during medical procedures in hospitals, physician's offices or in clinics and defending such litigation is expensive, disruptive, time consuming and could adversely affect our business. We currently maintain product liability insurance with combined coverage limits of $10 million on a claims-made basis. There is no assurance that this coverage will be adequate to protect us from any possible liabilities (individually or in the aggregate) we might incur in connection with the sale or testing of our products. In addition, we may need increased product liability coverage as additional products are commercialized. This insurance is expensive and in the future may not be available on acceptable terms, if at all.

Our business is subject to the potential for defects or failures associated with our products which could lead to recalls or safety alerts and negative publicity.

Manufacturing flaws, component failures, design defects, off-label uses or inadequate disclosure of product-related information could result in an unsafe condition or the injury or death of a patient. These problems could lead to a recall of, or issuance of a safety alert relating to our products, and result in significant costs and negative publicity. Due to the strong name recognition of our brands, an adverse event involving one of our products could result in reduced market acceptance and demand for all products within that brand, and could harm our reputation and our ability to market our products in the future. In some circumstances, adverse events arising from or associated with the design, manufacture or marketing of our products could result in the suspension or delay of our current regulatory reviews of our applications for new product approvals. We also may undertake voluntarily to recall products or temporarily shut down certain production lines based on internal safety and quality monitoring and testing data. Any of the foregoing problems could disrupt our business and have a material adverse effect on our business, results of operations, financial condition and cash flows.

We have incurred and may in the future incur impairments to our long-lived assets.

We review our long-lived assets, including intangible assets, for impairment annually or more frequently if events or changes in circumstances indicate that the carrying amount of these assets may not be recoverable. Additionally, if in any period our stock price decreases to the point where our fair value, as determined by our market capitalization, is less than the book value of our assets, this could also indicate a potential impairment and we may be required to record an impairment charge in that period which could adversely affect our results of operations.

Our valuation methodology for assessing impairment requires management to make judgments and assumptions based on historical experience and to rely heavily on projections of future operating performance. We operate in highly competitive environments and projections of future operating results and cash flows may vary significantly from actual results. Additionally, if our analysis indicates potential impairment to a long-lived intangible asset, we may be required to record additional charges to earnings in our financial statements, which could negatively impact our results of operations.

Risks Related to Our Stock

The market price of our stock has been and may continue to be highly volatile.

Our common stock is listed on the NYSE MKT Market under the ticker symbol "BVX." The market price of our stock has been and may continue to be highly volatile, and announcements by us or by third parties may have a significant impact on our stock price. These announcements may include:

The stock market has from time to time experienced extreme price and volume fluctuations, which have particularly affected the market prices for the medical technology sector companies, and which have often been unrelated to their operating performance. These broad market fluctuations may adversely affect the market price of our common stock.

Historically, when the market price of a stock has been volatile, holders of that stock have often instituted securities class action litigation against the company that issued the stock. If any of our stockholders brought a lawsuit against us, we could incur substantial costs defending the lawsuit. The lawsuit could also divert the time and attention of our management.

In addition, future sales by existing stockholders, warrant holders receiving shares upon the exercise of warrants, or any new stockholders receiving our shares in any financing transaction may lower the price of our common stock, which could result in losses to our stockholders. Future sales of substantial amounts of common stock in the public market, or the possibility of such sales occurring, could adversely affect prevailing market prices for our common stock or our future ability to raise capital through an offering of equity securities. Substantially all of our common stock is freely tradable in the public market without restriction under the Securities Act, unless these shares are held by our "affiliates", as that term is defined in Rule 144 under the Securities Act.

We have no present intention to pay dividends on our common stock and, even if we change that policy, we may be unable to pay dividends on our common stock.

We currently do not anticipate paying any dividends on our common stock in the foreseeable future. We currently intend to retain future earnings, if any, to finance operations and invest in our business. Any declaration and payment of future dividends to holders of our common stock will be at the discretion of our board of directors and will depend on many factors, including our financial condition, earnings, capital requirements, level of indebtedness, statutory and contractual restrictions applying to the payment of dividends and other considerations that our board of directors deems relevant.

If we change that policy and commence paying dividends, we will not be obligated to continue paying those dividends and our stockholders will not be guaranteed, or have contractual or other rights, to receive dividends. If we commence paying dividends in the future, our board of directors may decide, in its discretion, at any time, to decrease the amount of dividends, otherwise modify or repeal the dividend policy or discontinue entirely the payment of dividends. Under the Delaware law, our board of directors may not authorize the payment of a dividend unless it is either paid out of our statutory surplus.

The low trading volume of our common stock may adversely affect the price of our shares and their liquidity.

Although our common stock is listed on the NYSE MKT exchange, our common stock has experienced low trading volume. Limited trading volume may subject our common stock to greater price volatility and may make it difficult for investors to sell shares at a price that is attractive to them.

We may in the future seek to raise funds through equity offerings, which could have a dilutive effect on our common stock.

In the future we may determine to raise capital through offerings of our common stock, securities convertible into our common stock or rights to acquire these securities or our common stock. For instance, we are authorized to issue up to 40,000,000 shares of common stock and up to 10,000,000 shares of preferred stock, of which 1,975,639 shares have been designated as Series B Convertible Preferred Stock. The result of sales of such securities, or the conversion of the Series B Convertible Preferred Stock into shares of common stock, the exercise of warrants issued in connection with such offering or the triggering of anti-dilution provisions in such securities would ultimately be dilutive to our common stock by increasing the number of shares outstanding. We cannot predict the effect this dilution may have on the price of our common stock. In addition, the shares of preferred stock may have rights which are senior or superior to those of the common stock, such as rights relating to voting, the payment of dividends, redemption or liquidation.

Exercise of warrants and options issued by us will dilute the ownership interest of existing stockholders.

As of December 31, 2015, the warrants issued by us in December 2013 were exercisable for up to approximately 386,875 shares of our common stock, representing approximately 1.4% of our outstanding common stock.

As of December 31, 2015, our outstanding stock options to our employees, officers, directors and consultants amounted to approximately 3,131,447 shares of our common stock, representing approximately 11.6% of our outstanding common stock. 

The exercise of some or all of our warrants and stock options will dilute the ownership interests of existing stockholders. Any sales in the public market of the common stock issuable upon such conversion or exercise could adversely affect prevailing market prices of our common stock.

ITEM 1B. Unresolved Staff Comments

There are no outstanding unresolved comments from the staff of the Securities and Exchange Commission.

ITEM 2. Properties

Bovie currently maintains a 60,000 square foot facility which consists of office, warehousing, manufacturing and research space located at 5115 Ulmerton Rd., Clearwater, Florida. Monthly principal and interest payments relating to the purchase of this facility are approximately $29,000 per month.

In October, 2015, through our Bulgaria acquisition, we acquired a lease for 16,000 square feet of office, warehousing, and manufacturing facilities located in Sofia, Bulgaria. The rental cost of the facility is approximately $6,350 per month.

In March 2014, we signed a lease for offices located in Purchase, New York. The lease is for 3,650 square feet of office space with a monthly cost of approximately $8,500 per month. This facility presently houses our executive offices.

ITEM 3. Legal Proceedings

Not Applicable.

Other Matters

In the normal course of business, we are subject, from time to time, to legal proceedings, lawsuits and claims. Such matters are subject to many uncertainties, and outcomes are not predictable with assurance. If any of these matters arise in the future, it could affect the operating results of any one or more quarters.

ITEM 4. Mine Safety Disclosures

Not Applicable.

PART II

ITEM 5. Market for Registrant's Common Equity and Related Stockholder Matters

Our common stock currently is traded on the NYSE MKT. The table shows the reported high and low bid prices for the common stock during each quarter of the last eight respective quarters. These prices do not represent actual transactions and do not include retail markups, markdowns or commissions.

On March 7, 2016, the closing bid for our common stock as reported by the NYSE MKT exchange was $1.87 per share. As of March 7, 2016, the total number of stockholders of our common stock was approximately 3,518, of which approximately 2,906, are estimated to be stockholders whose shares are held in the name of their broker, stock depository or the escrow agent holding shares for the benefit of our stockholders and the balance are stockholders who keep their shares registered in their own name.

Securities Authorized for Issuance Under Equity Compensation Plans 

_____________

(1) Represents inducement grants for new hires

ITEM 6. Selected Financial Data

The following selected consolidated financial data (presented in thousands, except per share amounts and employee data) are derived from our consolidated financial statements. This data should be read in conjunction with the consolidated financial statements and notes thereto, and with Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations.

ITEM 7. Management's Discussion and Analysis of Financial Condition and Results of Operations

You should read the following discussion and analysis in conjunction with our financial statements and related notes contained elsewhere in this report. This discussion contains forward-looking statements that involve risks, uncertainties and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of a variety of factors discussed in this report and those discussed in other documents we file with the SEC. In light of these risks, uncertainties and assumptions, readers are cautioned not to place undue reliance on such forward-looking statements. These forward-looking statements represent beliefs and assumptions on as of the date of this report. While we may elect to update forward-looking statements and at some point in the future, we specifically disclaim any obligation to do so, even if our estimates change. Past performance does not guarantee future results.

Executive Level Overview

We are a medical device company engaged in manufacturing and marketing of electrosurgical devices. Our medical products include a wide range of devices including electrosurgical generators and accessories, cauteries, medical lighting, nerve locators and other products.

We internally divide our operations into three product lines; electrosurgical products, battery-operated cauteries and other products. The electrosurgical line includes electrosurgical products which include desiccators, generators, electrodes, electrosurgical pencils and various ancillary disposable products. These products are used in surgery for the cutting and coagulation of tissue. Battery-operated cauteries are used for precise hemostasis (to stop bleeding) in ophthalmology and in other fields. Our other revenues are derived from nerve locators, disposable and reusable penlights, medical lighting, license fees, development fees and other miscellaneous income.

The majority of our core products are marketed through medical distributors, which distribute to more than 6,000 hospitals, and to doctors and other healthcare facilities. New distributors are contacted through responses to our advertising in international and domestic medical journals and our presence at domestic and international trade shows. International sales represented approximately 16.9% of total revenues in 2015, 15.8% in 2014, and 17.5% in 2013. Management estimates our products have been sold in more than 150 countries through local dealers which are coordinated by sales and marketing personnel at the Clearwater, Florida facility.

In March, 2015, we completed an underwritten public offering of a total 5,218,749 shares of common stock, par value $0.001 per share at a price to the public of $2.50 per share, resulting in net proceeds of approximately $11.5 million, after deducting underwriting discounts and commissions and offering expenses. We intend to use the proceeds from the offering for operating costs, capital expenditures and for general corporate purposes, including working capital. Craig-Hallum Capital Group LLC ("Craig-Hallum") acted as the sole managing underwriter for the offering.

Concurrently with the underwriting, we completed the transactions contemplated under an exchange agreement with certain investors (the "Investors") with respect to which Great Point Partners, LLC acts as investment manager. Pursuant to the terms of the exchange agreement, we issued 3,588,139 shares of our Series B Convertible Preferred Stock (the "Series B Preferred Stock") in exchange for 3,500,000 shares of our Series A 6% Convertible Preferred Stock and warrants to purchase up to 5,250,000 shares of our common stock in the aggregate which were previously issued in conjunction with the sale of our Series A 6% Convertible Preferred Stock to the Investors in a December 13, 2013 offering, as well as accrued and unpaid preferred dividends. At December 31, 2015, the Series B Preferred Stock is convertible into an aggregate of 3,951,278 shares of our common stock.

In October, 2015 we entered into and consummated a Share Purchase Agreement whereby we acquired all of the outstanding equity interests of Bovie Bulgaria EOOD, a limited liability company incorporated under Bulgarian law.

Our business is generally not seasonal in nature. Our international sales increased 14% in 2015 compared to 2014, with substantial growth in Latin America, as well as improvement in the Middle East and Asia. We were negatively impacted by the substantial drop in oil prices and the strength of the dollar. Our challenge has been the strength of the dollar in Europe and some products being withdrawn from the market due to regulatory testing and requirements. We have received approval for compliant, new and improved 200 and 300-watt generators. This will fill a portion of the lost product opportunity.

During 2015, we continued our full scale commercialization efforts for J-Plasma. We have a direct sales force of 13 field-based selling professionals, and coupled with our independent manufacturing representatives give us a total sales force of 39. This is a hospital based selling organization with its focus on the use of J-Plasma for operating room procedures. In addition, we have invested in training programs and marketing-related activities to support accelerated adoption of J-Plasma.

We strongly encourage investors to visit our website: www.boviemedical.com to view the most current news and to review our filings with the Securities and Exchange Commission.

Results of Operations

Sales

Overall sales increased by 6.6% or approximately $1.8 million for the period ended December 31, 2015 when compared with the same period in 2014. The increase in sales was mainly attributable to an increase in J-Plasma sales of approximately $1.1 million, electrodes of approximately $427,000, lighting of $418,000 and other products of approximately $637,000. Generator sales declined approximately $739,000 in 2015 due to the expiration of existing OEM contracts.

Although we have only one reporting segment, beginning in 2014, management began analyzing revenue and other operating metrics across three operating segments. Core product revenue, which consists of our brand name electrosurgical devices and accessories, cauteries, penlights, lighting, colposcopes, and other similar products, increased 7.3% or approximately $1.8 million for the year ended December 31, 2015 when compared with the same period in 2014. The OEM product line consists of our private label business and consulting services, and revenue for this product line decreased 32.8% or approximately $1.0 million when compared to the same period in 2014. J-Plasma sales were $1.3 million, a more than five-fold increase compared to sales of $210,000 in 2014.

Overall sales increased by 17%, or approximately $4.0 million, for the period ended December 31, 2014 when compared with the same period in 2013. The increase in sales was mainly attributable to an increase in generator sales of approximately $2.7 million, electrodes of approximately $1.1 million, and lighting and other products of approximately $227,000. Cautery sales declined slightly by approximately $75,000 in 2014.

Our ten largest customers accounted for approximately 58.3%, 61.0%, and 60.9%, of net revenues for 2015, 2014, and 2013, respectively. In 2015, McKesson accounted for 18.6% and National Distribution & Contracting Inc. accounted for 13.3% of our sales. In 2014, National Distribution & Contracting Inc. accounted for 13.9% of our sales. In 2013, National Distribution & Contracting Inc. accounted for 13.1%, PSS World Medical accounted for 10.9% and McKesson Medical Surgical accounted for 10.3% of our sales.

Gross Profit

Our gross profit margin as a percentage of sales increased by 10% or approximately $3.6 million during the year ended December 31, 2015 compared with the same period in 2014. This comparable increase was attributable to excess and obsolete inventory write downs of approximately $2.0 million in 2014, which reduced margins in that year.

Our gross profit margin as a percentage of sales decreased by 6.4% or approximately $206,000 during the year ended December 31, 2014 compared with the same period in 2013. This decrease was mainly attributed to a write down of excess and obsolete inventory.

We do not anticipate any material impact to our gross profit, material costs, or other costs as a result of the effect of inflation or any material impact of changing prices on net revenue.

Other Costs and Expenses

Research and development

Our expenditures for R&D related activities increased by 52.5% or approximately $744,000 for the year ended December 31, 2015 compared with the same period in 2014. This was mainly caused by increased labor and material costs of approximately $643,000 and an increase in consulting costs of approximately $101,000 as we continue to accelerate our R&D product pipeline.

Our expenditures for R&D related activities increased by 12.4% or approximately $156,673 for the year ended December 31, 2014 compared with the same period in 2013. This was mainly caused by an increase in R&D consulting costs of approximately $117,400 and increased labor and material costs of approximately $39,273, as we accelerate our R&D product pipeline.

Professional services

Professional services costs increased 46.0% or approximately $468,000 for the year ended December 31, 2015 compared with the same period in 2014. Accounting and auditing fees incurred in connection with our acquisition of Bovie Bulgaria increased approximately $132,000 compared with the same period 2014. Legal fees increased over the prior year by approximately $104,000 due to the acquisition of Bovie Bulgaria and the public offering, which closed in March 2015. We experienced an increase of approximately $232,000 related to investor relations and other professional services compared to the same period in 2014.

Professional services costs decreased 44.6% or approximately $819,000 for the year ended December 31, 2014 compared with the same period in 2013. Legal fees, incurred in connection with litigation, decreased over the prior year by approximately $896,500 and are the main reason for the decrease in professional costs. We saw an increase of approximately $77,500 related to investor relations and accounting and tax consulting fees compared to the same period in 2013.

Salaries and related costs 

During 2015 salaries and related expenses increased approximately 30.7% or approximately $1.8 million compared to the prior year. The increase was attributable to our hiring in management and production staff, and the J-Plasma direct sales force, and incentive compensation.

During 2014 salaries and related expenses increased approximately 43.4% or approximately $1.7 million compared to with the prior year. The increase was primarily the result of hiring in executive management, the J-Plasma direct sales force, and incentive compensation.

Selling, general and administrative expenses

Selling, general and administrative costs increased by 25.9% or approximately $1.7 million for the period ended December 31, 2015 compared with the same period in 2014.  We experienced increases in advertising, marketing, and trade show costs of approximately $490,000 related largely to the branding and marketing of J-Plasma, sales commissions of approximately $541,000 resulting from the increase in sales, an increase in general insurance of $194,000, sales related travel and entertainment costs of approximately $663,000, which was expected as we expanded our direct sales force and territory footprint, administrative T&E increased $63,000,  and utilities, rents, maintenance, office and computer supplies of approximately $208,000, offset by decreases in regulatory of $122,000, administrative costs of $94,000, professional services of $159,000 and other costs of $84,000.

Selling, general and administrative costs increased by 15.7% or approximately $909,000 for the period ended December 31, 2014 compared with the same period in 2013. We experienced increases in advertising, marketing, shows and travel costs of approximately $385,000 related largely to the branding and marketing of J-Plasma, sales commissions of approximately $165,000 resulting from the increase in sales, an increase in general insurance of $126,000, regulatory costs of approximately $175,000, non-sales related travel and administrative costs of approximately $292,000, and utilities, rents, maintenance, office and computer supplies of approximately $142,000. Professional service expenses declined approximately $602,000 primarily due to a reduction in litigation related legal costs.

Other Income and (Expenses)

Interest Expense

Total other expense increased by approximately $7,000 or 0.5% for the year ended December 31, 2015 as compared with the same period in 2014.

Total other income expense decreased by approximately $1.3 million or 89.5% for the year ended December 31, 2014 as compared with the same period in 2013. The decrease was mainly caused by the non-recurring issuance costs and fees related the warrants issued as part of the equity financing transaction mentioned below.

Change in Fair Value of Derivative Liabilities

On December 13, 2013, we entered into a securities purchase agreement pursuant to which we issued 3,500,000 shares of our newly designated Series A 6% Convertible Preferred Stock with a stated value of $2.00 per share and 5,250,000 warrants to purchase our common stock, at an exercise price of $2.387 per share. We also issued 525,000 warrants to the placement agent. The warrants were accounted for as derivative financial instruments at fair value and are re-valued each period.

On March 17, 2015, we completed transactions contemplated under an exchange agreement (the "Exchange Agreement") entered into on March 11, 2015 with certain investors (the "Investors") with respect to which Great Point Partners, LLC acts as investment manager. Pursuant to the terms of the Exchange Agreement, we issued 3,588,139 shares of our Series B Convertible Preferred Stock (the "Series B Preferred Stock") in exchange for 3,500,000 shares of our Series A 6% Convertible Preferred Stock and warrants to purchase up to 5,250,000 shares of our common stock in the aggregate which were previously issued in conjunction with the sale of our Series A 6% Convertible Preferred Stock to the Investors in a December 13, 2013 offering, as well as accrued and unpaid preferred dividends. The Series B Preferred Stock is convertible into an aggregate of 7,176,278 shares of our common stock, upon the terms set forth in the Certificate of Designation. During the period ended September 30, 2015, the holders of Series B Preferred Stock exercised their conversion rights on 1,612,500 shares of Series B Preferred Stock. The remaining Series B Stock at December 31, 2015 is convertible into an aggregate of 3,951,278 shares of our common stock.

At December 31, 2015, the placement agent warrants were valued at $267,331, and we recognized an aggregate gain related to their change in value of $730,891.

At December 31, 2014, the investor and placement agent warrants were valued at $10,547,250 and $998,222, respectively, and we recognized an aggregate loss related to their change in value of $6,486,572.

In 2010, we issued warrants to investors and to our placement agent in connection with an equity offering. The warrants issued to the investors contained anti-dilution protection in the event we issued securities at a price lower than the exercise price of the warrants. As a result of the issuance of our Series A 6% Convertible Preferred Stock on December 13, 2013, the exercise price of the investor warrants issued in 2010 was reduced from $6.00 per share to $2.00 per share and the number of warrants was increased proportionately. The 2010 investor and placement agent warrants, which are accounted for as derivative financial instruments at fair value, were valued at $1,067,954 and $689,535 at December 31, 2014 and December 31, 2013, respectively, and we recognized a net loss for the year ended December 31, 2014 of $378,419. During 2015, 628,572 warrants were exercised, resulting in proceeds of $1.2 million. The unexercised warrants expired on April 18, 2015.

Income Taxes

The income tax provision is related to foreign and certain state income taxes. We have recorded a full valuation allowance against the net deferred tax assets with a finite life. A valuation allowance is required to be provided to reduce the deferred tax assets to a level which, more likely than not, will be realized. Management evaluated the positive and negative evidence in determining the realizability of the net deferred tax asset. In determining the need for valuation allowance, we reviewed historic operating results, updated 2015 actual results, as well as future income forecasts based on the projections, management concluded that it was not more likely that the Company should realize its net deferred tax assets through future operating results and the reversal of taxable temporary differences. If in the future we determine that we will be able to realize any of the net deferred tax assets, we will make adjustment to the valuation allowance, which would increase our income in the period that the determination is made.

Liquidity and Capital Resources

Our working capital at December 31, 2015 was approximately $17.9 million compared with $11.6 million at December 31, 2014. Accounts receivable days sales outstanding were 34 days and 36 days at December 31, 2015 and 2014, respectively. The number of days sales in inventory, which is the total inventory available for production divided by the 12-month average cost of materials, decreased 36 days to 177 days equating to an inventory turn ratio of 1.85 at December 31, 2015 from 213 days and an inventory turn ratio of 1.53 at December 31, 2014. The lower number of days sales in inventory which translated into a higher inventory turnover rate is mainly due to the write off of excess and obsolete inventory, along with an increase in sales related to lighting product lines which are non-stocked items.

For the year ended December 31, 2015, net cash used in operating activities was approximately $5.8 million compared with net cash used by operating activities of approximately $417,000 in 2014. The change was mainly attributable to the reduction in the fair value of derivative liabilities as a result of the extinguishment of warrants of $5.5 million and the change in current assets and liabilities of $182,000.

Net cash used in investing activities was approximately $921,000 for the year ended December 31, 2015 compared to net cash used in investing activities was approximately $630,000 during 2014. The change was due mainly to an increase in overall purchases of equipment, molds and test fixtures, and goodwill associated with the acquisition of Bovie Bulgaria.

Cash provided by financing activities of approximately $12.8 million during the year ended December 31, 2015, attributable to the proceeds from the public offering and the exercise of warrants, compared to cash used by financing activities of approximately $1.14 million during year ended December 31, 2014.

On March 20, 2014, the Company entered into a transaction with The Bank of Tampa, a Florida banking corporation ("Lender") wherein Lender extended to the Company a mortgage loan in the principal amount of $3,592,000 (the "Loan"). The obligations under the Loan are secured by a first priority mortgage and security interest in the Company's Clearwater, Florida facility as well as an assignment of the Company's accounts receivable. In addition, the Company pledged an interest in a certificate of deposit in the amount of $898,000 as additional collateral which declines on a pro rata basis as principal is paid. The initial maturity date of the Loan is March 20, 2017; however the Company has an option to extend the maturity date until March 20, 2022.

Borrowings under the Loan bear interest at LIBOR plus 3.5%, with a fixed monthly principal payment of $19,956. The interest rate at December 31, 2015 was 3.744%.

The Loan documents contain customary financial covenants, including a covenant that the Company maintain a minimum liquidity of $750,000. Although there is no Debt Service Coverage Ratio (as defined in the Loan Agreement) for the initial term of the Loan, should the Company desire to extend the Loan beyond three years, the Company must maintain a Debt Service Coverage Ratio for each of the preceding four quarters of not less than 1.0 to 1.0. In the event the Loan is extended, the Debt Service Coverage Ratio must not be less than 1.2 to 1.0.

Simultaneously with the closing of the Loan, the Company redeemed those certain Industrial Revenue Bonds issued by the Pinellas County Industrial Development Authority and satisfied its obligations to its prior lender, PNC Bank, N.A ("PNC Bank"). In connection with the redemption of the Bonds, the Company paid PNC Bank $3,188,332.51 to satisfy its existing credit facility. In connection with the termination of the interest rates swap agreement with PNC Bank, the Company paid PNC Bank an additional $410,275.

Our future contractual obligations for agreements with initial terms greater than one year and agreements to purchase materials in the normal course of business are summarized as follows (in thousands):

We may choose to access the capital markets to raise additional capital. To facilitate this and to allow us to quickly react should we so decide, we filed a shelf registration statement with the Securities and Exchange Commission in December 2014.

Critical Accounting Estimates

In preparing the consolidated financial statements in accordance with accounting principles generally accepted in the United States of America (U.S. GAAP), we have adopted various accounting policies. Our most significant accounting policies are disclosed in Note 2 to the consolidated financial statements.

The preparation of the consolidated financial statements in conformity with U.S. GAAP requires us to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Our estimates and assumptions, including those related to inventories, intangible assets, property, plant and equipment, legal proceedings, research and development, warranty obligations, product liability, fair valued liabilities, sales returns and discounts, stock based compensation and income taxes are updated as appropriate, which in most cases is at least quarterly. We base our estimates on historical experience, or various assumptions that are believed to be reasonable under the circumstances and the results form the basis for making judgments about the reported values of assets, liabilities, revenues and expenses. Actual results may materially differ from these estimates.

Estimates are considered to be critical if they meet both of the following criteria: (1) the estimate requires assumptions about material matters that are uncertain at the time the accounting estimates are made, and (2) other materially different estimates could have been reasonably made or material changes in the estimates are reasonably likely to occur from period to period. Our critical accounting estimates include the following:

Inventory reserves

We maintain a reserve for excess and obsolete inventory resulting from the potential inability to sell our products at prices in excess of current carrying costs. The markets in which we operate are highly competitive, with new products and surgical procedures introduced on an ongoing basis. Such marketplace changes may cause our products to become obsolete. We make estimates regarding the future recoverability of the costs of these products and record a provision for excess and obsolete inventories based on historical experience, and expected future trends. If actual product life cycles, product demand or acceptance of new product introductions are less favorable than projected by management, additional inventory write-downs may be required, which would unfavorably affect future operating results.

Long-lived assets

We review long-lived assets which are held and used, including property and equipment and intangible assets, for impairment whenever changes in circumstances indicate that the carrying amount of the assets may not be recoverable. Such evaluations compare the carrying amount of an asset to future undiscounted net cash flows expected to be generated by the asset over its expected useful life and are significantly impacted by estimates of future prices and volumes for our products, capital needs, economic trends and other factors that are inherently difficult to forecast. If the asset is considered to be impaired, we record an impairment charge equal to the amount by which the carrying value of the asset exceeds its fair value determined by either a quoted market price, if any, or a value determined by utilizing a discounted cash flow technique.

Derivative liabilities valued at fair value

We generally do not use derivative financial instruments to hedge exposures to cash-flow risks or market-risks. However, certain financial instruments, such as warrants, which are indexed to our common stock, are classified as liabilities when either (a) the holder possesses rights to net-cash settlement or (b) physical or net-share settlement is not within our control. In such instances, net-cash settlement is assumed for financial accounting and reporting purposes, even when the terms of the underlying contracts do not provide for net-cash settlement. Such financial instruments are initially recorded, and continuously carried, at fair value.

Determining the fair value of these instruments involves judgment and the use of certain relevant assumptions including, but not limited to, interest rate risk, historical volatility and stock price, estimated life of the derivative, anti-dilution provisions, and conversion/redemption privileges. The use of different assumptions or changes in those assumptions could have a material effect on the estimated fair value amounts.

Stock-based Compensation

Under our stock option plan, options to purchase common shares of the Company may be granted to key employees, officers and directors of the Company by the Board of Directors. The Company accounts for stock options in accordance with FASB ASC Topic 718-10, Compensation-Stock Compensation, with compensation expense amortized over the vesting period based on the trinomial lattice option-pricing model fair value on the grant date, which includes a number of estimates that affect the amount of our expense.

Litigation Contingencies

From time to time, we are exposed to claims and litigation arising in the ordinary course of business and use various methods to resolve these matters in a manner that we believe serves the best interest of the Company and our stockholders. There can be no assurance these actions or other third party assertions will be resolved without costly litigation, or in a manner that is not adverse to our financial position. We do not believe that any of the currently identified claims or litigation matters will have a material adverse impact on our results of operations, cash flows or financial condition. However, given uncertainties associated with any litigation, if our assessments prove to be wrong, or if additional information becomes available such that we estimate that there is a possible loss or possible range of loss associated with these contingencies, then we would record the minimum estimated liability, which could materially impact our results of operations, financial position and cash flows.

Income Taxes

The provision for income taxes includes federal, foreign, state and local income taxes currently payable and those deferred because of temporary differences between the financial statement and tax bases of assets and liabilities. Deferred tax assets or liabilities are computed based on the difference between the financial statement and income tax bases of assets and liabilities using enacted marginal tax rates. Valuation allowances are recorded to reduce deferred tax assets when it is more likely than not that a tax benefit will not be realized. Deferred income tax expenses or credits are based on the changes in the asset or liability from period to period.

We have net operating loss and tax credit carry forwards available in certain jurisdictions to reduce future taxable income. Future tax benefits for net operating loss and tax credit carry forwards are recognized to the extent that realization of these benefits is considered more likely than not. This determination is based on the expectation that related operations will be sufficiently profitable or various tax, business and other planning strategies will enable us to utilize the operating loss and tax credit carry forwards. We cannot be assured that we will be able to realize these future tax benefits or that future valuation allowances will not be required. To the extent that available evidence raises doubt about the realization of a deferred income tax asset, a valuation allowance is established.

It is our policy to provide for uncertain tax positions and the related interest and penalties based upon management's assessment of whether a tax benefit is more likely than not to be sustained upon examination by tax authorities. To the extent that the probable tax outcome of these uncertain tax positions changes, such changes in estimate will impact the income tax provision in the period in which such determination is made. At December 31, 2015, we believe we have appropriately accounted for any unrecognized tax positions. To the extent we prevail in matters for which a liability for an unrecognized tax benefit is established or we are required to pay amounts in excess of the liability, our effective tax rate in a given financial statement period may be affected.

Since inception, we have been subject to tax by both federal and state taxing authorities. Until the respective statutes of limitations expire (which may be as much as 20 years while we have unused NOL's), we are subject to income tax audits in the jurisdictions in which we operate.

Inflation

Inflation has not materially impacted the operations of our Company.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements at this time.

Recent Accounting Pronouncements

See Note 10 of the Notes to Consolidated Financial Statements.

ITEM 7A. Quantitative and Qualitative Disclosures about Market Risk

Our short-term investments consist of cash, cash equivalents and overnight investments. As such we do not believe we are exposed to significant interest rate risk. The primary objective of our investment activities is to preserve principal while at the same time maximizing yields without significantly increasing risk. To achieve this objective, we invest in highly liquid overnight money market investments. If a 10% change in interest rates were to have occurred on December 31, 2015, this change would not have had a material effect on the fair value of our investment portfolio as of that date.

ITEM 8. Financial Statements and Supplementary Data

The information required by this item may be found beginning on page F-1 of this Annual Report on Form 10-K.

ITEM 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

There were no disagreements with our current accountants on accounting and financial disclosures.

ITEM 9A. Disclosure Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We have carried out an evaluation, under the supervision of and with the participation of our management, including our Chief Executive Officer ("CEO") and Chief Financial Officer ("CFO"), of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended), as of December 31, 2015. Based upon that evaluation, our CEO and CFO concluded that, as of the end of that period, our disclosure controls and procedures are effective in providing reasonable assurance that (a) the information required to be disclosed by us in the reports that we filed or submitted under the Securities Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC's rules and forms, and (b) such information is accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure. In designing and evaluating our disclosure controls and procedures, our management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and our management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

Changes in Internal Control over Financial Reporting

Section 404 of the Sarbanes-Oxley Act of 2002 requires us to evaluate annually the effectiveness of our internal controls over financial reporting as of the end of each fiscal year, and to include a management report assessing the effectiveness of our internal control over financial reporting in all annual reports. There were no changes in our internal control over financial reporting during the quarter ended December 31, 2015 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Management's Annual Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act as a process designed by, or under the supervision of, a company's principal executive and principal financial officers and effected by a company's board of directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our internal control over financial reporting includes those policies and procedures that:

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2015. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control — Integrated Framework (2013). Based on our assessment, our management has concluded that, as of December 31, 2015, our internal control over financial reporting was effective.

ITEM 9B. Other Information

None.

Part III

ITEM 10. Directors, Executive Officers, and Corporate Governance

BACKGROUND AND EXPERIENCE OF DIRECTORS

When considering whether directors and nominees have the experience, qualifications, attributes or skills, taken as a whole, to enable the Board of Directors ("Board") to satisfy its oversight responsibilities effectively in light of the Company's business and structure, the Governance and Nominating Committee focused primarily on each person's background and experience as reflected in the information discussed in each of the directors' individual biographies set forth immediately below. We believe that our directors provide an appropriate mix of experience and skills relevant to the size and nature of our business. As more specifically described in such person's individual biographies set forth below, our directors possess relevant and industry-specific experience and knowledge in the medical, engineering and business fields, as the case may be, which we believe enhances the Board's ability to oversee, evaluate and direct our overall corporate strategy. The Governance and Nominating Committee annually reviews and makes recommendations to the Board regarding the composition and size of the Board so that the Board consists of members with the proper expertise, skills, attributes, and personal and professional backgrounds needed by the Board, consistent with applicable regulatory requirements.

The Governance and Nominating Committee believes that all directors, including nominees, should possess the highest personal and professional ethics, integrity, and values, and be committed to representing the long-term interests of our stockholders. The Governance and Nominating Committee will consider criteria including the nominee's current or recent experience as a senior executive officer, whether the nominee is independent, as that term is defined in existing independence requirements of the NYSE MKT Market and the Securities and Exchange Commission, the business, scientific or engineering experience currently desired on the Board, geography, the nominee's industry experience, and the nominee's general ability to enhance the overall composition of the Board.

The Governance and Nominating Committee does not have a formal policy on diversity; however, in recommending directors, the Board and the Committee consider the specific background and experience of the Board members and other personal attributes in an effort to provide a diverse mix of capabilities, contributions and viewpoints which the Board believes enables it to function effectively as the Board of Directors of a company with our size and nature of business.

Set forth below is information regarding the executive officers, directors, and key employees of Bovie Medical Corporation as of March 15, 2016.

Directors serve for one-year terms and are elected at the annual stockholders' meeting.

Andrew Makrides, Esq. age 74, Executive Chairman of the Board of Directors, received a Bachelor of Arts degree in Psychology from Hofstra University and a Juris Doctor Degree from Brooklyn Law School. He is a member of the Bar of the State of New York and practiced law from 1968 until joining Bovie Medical Corporation as a co-founder and Executive Vice President and director, in 1982. Mr. Makrides became President of the Company in 1985 and the CEO in December 1998 and has served as such until March 18, 2011 at which point he relinquished his position as President, but remained CEO until December 2013. Mr. Makrides employment contract extends to December 31, 2016. Mr. Makrides has over 30 years of executive experience in the medical industry.

Robert L. Gershon, age 49, Chief Executive Officer and Director, has over 25 years of healthcare industry experience. On the operations side he ran the largest sales and marketing business at Covidien. With over $1B in P&L responsibility he consistently led an organization of over 600 people to double-digit revenue growth outpacing market category growth and capturing significant market share points during challenging healthcare economic conditions. He also was VP of sales and marketing at Henry Schein ($1.4B shared P&L for medical division/$115M full P&L for dialysis division) and earlier in his career spent over 13 years as a healthcare consultant for Booz, Allen, KPMG and two boutique consultancies where his practice focused on strategic planning, business development and mergers and acquisitions. Mr. Gershon received an MBA from J.L. Kellogg Graduate School of Management at Northwestern University and a BSBA degree from American University.

J. Robert Saron, age 63, President, Chief Sales and Marketing Officer and Director, holds a Bachelor degree in Social and Behavioral Science from the University of South Florida. From 1988 to present Mr. Saron has served as a director of the Company. Mr. Saron has previously served as both director and president of the Health Care Manufacturing Management Council. In 2011 Mr. Saron received the Leonard Berke Achievement award for ethics, mentoring, marketing skill, industry knowledge, contributions to the industry and contributions to HMMC. He currently serves as a director of the Health Industry Distributors Association Education Foundation. Mr. Saron received the Health Industry Distributors Association's highest award in 2008, the Industry Award of Distinction, and in February 2013 was inducted into the Medical Distribution Hall of Fame. Mr. Saron's employment contract extends to December 31, 2016. Mr. Saron brings over 35 years of executive marketing and distribution experience in the medical industry.

John J. McCarthy, age 49, has served as our Chief Commercialization Officer since March 2014. Mr. McCarthy has 23 years of sales and marketing experience of which the last 16 years has been spent in the healthcare industry. Most recently, he served as Vice President of Sales and Marketing for US Healthcare at Z-Medica. Prior to that, Mr. McCarthy spent 15 years with Covidien, in positions of increasing responsibility where he was charged with achieving sales and business development goals. His most recent position at Covidien was as Area Sales Vice President for the Endo Mechanical Intelligent Device franchise, where he managed a team of 50 sales professionals. Mr. McCarthy is a graduate of Loyola College in Baltimore, Maryland, were he obtained a BA degree in Marketing in 1988 and an MBA in Marketing in 1990. Mr. McCarthy's employment agreement extends until March 31, 2016.

Jay D. Ewers, CPA, age 55, Chief Financial Officer, Treasurer and Secretary, has more than 30 years of accounting experience, having held financial executive positions in corporations ranging from early stage to high profile public companies with global operations in the medical equipment, manufacturing and semiconductor industries. Mr. Ewers joined the company as Corporate Controller in June, 2014. From 2004 to 2014, Mr. Ewers worked in private practice providing accounting and advisory services to both publicly traded and privately-held companies.Mr. Ewers received his CPA license in 1987 and is a certified internal auditor.

Moshe Citronowicz, age 63, Senior Vice President came to the United States in 1978, and has worked in a variety of manufacturing and high technology industries. In October 1993, Mr. Citronowicz joined the Company as Vice President of Operations and served as our Chief Operating Officer until November 2011. Currently, he is serving as the Senior Vice President. Mr. Citronowicz's employment contract extends to December 31, 2016.

Charles T. Orsatti, age 71, joined the Board in May, 2015 and serves as our Vice Chairman of the Board as well as Chair of our Compensation Committee and member of our Audit Committee. Mr. Orsatti has served as a member of the board of Biotronic Neuronetwork, Inc., a provider of inter-operative neurological monitoring services for hospital based intensive surgeries, from 2008 to the present, as well as chairman of the board from 2013 to the present. From 2008 to 2011, Mr. Orsatti served as a director of Angiodynamics, Inc., a Nasdaq-listed medical device manufacturer. He also served as a director of SRI Surgical, Inc. from 2004 to 2011. Mr. Orsatti previously served as chairman and director of djOrthopedics, Inc., a NYSE-listed orthopedic sports medicine company, from 1999 until November 2007. Since 1995, Mr. Orsatti has been Chairman and Managing Partner of Fairfield Capital Partners, Inc., a private equity investment firm. Mr. Orsatti was Chairman and Chief Executive Officer of Fairfield Medical Products Corporation, a manufacturer of critical care products. From 1998 to 2007, Mr. Orsatti was a senior consultant to J.P. Morgan Partners and was appointed the Managing Partner of a large investment fund focused on acquisitions in the orthopedic healthcare segment. From 1983 to 1986, he was Chief Executive Officer of Coloplast, Inc., a manufacturer of single use products and then served as Chief Operating Officer and President of two medical divisions of British Oxygen Corporation. Mr. Orsatti began his career with the medical products division of Air Products and Chemicals, Inc. and subsequently worked for the Critikon Division of Johnson & Johnson. He also served as a Captain in the United States Army. He received his Bachelor Science in Marketing and Management from Penn State University.

Lawrence J. Waldman, CPA, age 69, has served as a director since 2011 and he is currently the Chair of our audit committee and Lead Independent Director of the Board. Mr. Waldman has over thirty-five years of experience in public accounting. Mr. Waldman currently serves as an advisor to the accounting firm of EisnerAmper LLP, where he was previously the Partner-in-Charge of Commercial Audit Practice Development for Long Island since September 2011. Prior to joining EisnerAmper LLP, Mr. Waldman was the Partner-in-Charge of Commercial Audit Practice Development for Holtz Rubenstein Reminick, LLP from July 2006 to August 2011. Mr. Waldman was the Managing Partner of the Long Island office of KPMG LLP from 1994 through 2006, the accounting firm where he began his career in 1972. Mr. Waldman serves as a member of the Board of Directors of Northstar/RXR Metro Income Fund, a non-traded Real Estate Investment Trust, and has served as a member of its audit committee since 2014. Mr. Waldman also serves as a member of the State University of New York's Board of Trustees and as chair of its audit committee. Mr. Waldman was elected to the Board of Directors of Comtech Telecommunications Corp. in August of 2015, and since December 2015, serves as Chair of its Audit Committee. Mr. Waldman is also a member of Supervisory Committee of Bethpage Federal Credit Union. He previously served as the Chairman of the Board of Trustees of the Long Island Power Authority and as Chair and a member of the finance and audit committee of its Board of Trustees. Mr. Waldman meets the definition of a financial expert as defined by the SEC and NYSE MKT.

Michael Geraghty, age 68, has served as a director since March 2011 and is the Executive Vice President of Global Sales at Optos, Inc., a developer and manufacturer of retinal imaging devices for screening, detection and diagnosis of eye related conditions. From 2005 through 2008, he was the President of International Sales at Gyrus Acmi where he first started in 2000 as Senior Vice President of Sales for Gyrus Medical. Prior to this, Mr. Geraghty was the Vice President of Sales and Marketing for Everest Medical, Inc. and before that was the Director of Marketing for Advanced Products at Arthrocare Corporation. Mr. Geraghty specializes in building independent direct sales teams in the medical device industry and has extensive domestic and international sales and marketing experience. He received his bachelor's degree from St. Mary's University and graduate degree in Executive Sales Management from the University of Minnesota.

John Andres, age 58, has over thirty years of experience in the medical device industry. Since April, 2004, Mr. Andres has been a private consultant, doing business through John C. Andres, LLC, specializing in patent/business strategy development and execution. He also is a partner of Hawk Healthcare, LLC, which provides strategic transaction management to private individuals and companies.

In 2004, Mr. Andres helped found K2M, Inc. (KTWO), and from 2004 until 2010 served as a member of the Board of Directors of K2M, Inc. Prior to 2004, Mr. Andres held various legal and strategic business development positions at the Surgical Division of Tyco Healthcare Group, LLP, now Covidien (NYSE: COV) and its predecessor, United States Surgical Corporation. Before joining U.S. Surgical, Mr. Andres worked at the New York law firm of Morgan & Finnegan. He received his Associate of Applied Science degree from Rochester Institute of Technology, his Bachelor of Arts degree from Lehigh University, and his Juris Doctor from Pace University School of Law.

Involvement in Certain Legal Proceedings

None

Independent Board Members

The Board currently has four independent members, John Andres, Charles Orsatti, Michael Geraghty, and Lawrence J. Waldman, who meet the existing independence requirements of the NYSE MKT Market and the Securities and Exchange Commission and represent a majority of the board.

Board Leadership

The independent directors appointed Lawrence J. Waldman as the Lead Independent Director. The Lead Independent Director is appointed by the Board and is responsible for coordinating the activities of the independent directors and coordinating with the Chief Executive Officer of the Company to set agendas for Board meetings and chair executive sessions of the independent directors. The Lead Independent Director is also responsible for meeting, from time to time, with the Company's Compensation Committee to discuss the Chief Executive Officer's performance.

The Company's Corporate Governance Policies also contain several features which the company believes will ensure that the Board maintains effective and independent oversight of management, including the following:

The Board has no formal policy with respect to separation of the positions of Chairman and CEO or with respect to whether the Chairman should be a member of management or an independent director, and believes that these are matters that should be discussed and determined by the Board from time to time.  On December 13, 2013, Andrew Makrides resigned from his position as Chief Executive Officer of the Company and Robert Gershon was appointed as Chief Executive Officer of the Company. Mr. Gershon is tasked with the responsibility of implementing our corporate strategy, we believe he is best suited for leading discussions, at the Board level, regarding performance relative to our corporate strategy, and this discussion accounts for a significant portion of the time devoted at our Board meetings.

Board Evaluations<>

The Board has adopted a policy to evaluate its performance and effectiveness as well as that of the three standing committees on an annual basis. The purpose of the evaluation is to track progress in certain areas targeted for improvement from year to year and to identify ways to enhance the Board's effectiveness. As part of the evaluation, each Director may complete a written questionnaire developed by the Governance and Nominating Committee to provide feedback on the effectiveness of the Board, the Committees, as well as each individual Director's own contributions. The collective ratings and comments of the Directors are compiled and then presented to the Governance and Nominating Committee and to the full Board for discussion and action as necessary.

Risk Management

The Board believes that risk management is an important component of the Company's corporate strategy. While we assess specific risks at our committee levels, the Board, as a whole, oversees our risk management process, and discusses and reviews with management major policies with respect to risk assessment and risk management. The Board is regularly informed through its interactions with management and committee reports about risks we face in the course of our business. Our Audit Committee also takes an active role in risk assessment and risk management.

Audit Committee

The Audit Committee assists the Board in its general oversight of our financial reporting, internal controls, and audit functions, and is directly responsible for the appointment, compensation and oversight of the work of our independent registered public accounting firm. The Audit Committee reviews and discusses with management and our independent accountants the annual audited and quarterly financial statements (including the disclosures under "Management's Discussion and Analysis of Financial Condition and Results of Operations"), reviews the integrity of the financial reporting processes, both internal and external, reviews the qualifications, performance and independence of our independent accountants, and prepares the Audit Committee Report included in this Annual Report on Form 10-K in accordance with rules and regulations of the Securities and Exchange Commission. The Audit Committee has the power to investigate any matter brought to its attention within the scope of its duties. It also has the authority to retain counsel and advisors to fulfill its responsibilities and duties. The Audit Committee also acts as a qualified legal compliance committee.

Our Audit Committee consists of three independent members of the Board of Directors, Lawrence J. Waldman, John Andres and Charles Orsatti. As a smaller reporting company, we are required to have at least two independent members comprising our Audit Committee in accordance with Rule 10A-3 of the Securities Exchange Act of 1934 and the rules of the NYSE MKT Exchange. During 2015, Mr. Waldman served as the Audit Committee Chairman and financial expert. The Audit Committee meets as often as it determines necessary but not less frequently than once every fiscal quarter. During 2015, the Audit Committee met six times.

Governance and Nominating Committee

The Governance and Nominating Committee is responsible for matters relating to the corporate governance of our company and the nomination of members of the board and committees thereof. During 2015, our Governance and Nominating Committee consisted of three independent members of the Board of Directors, John Andres who serves as Chairman, Lawrence J. Waldman, and Michael Geraghty. The Governance and Nominating Committee meets as often as it determines necessary, but not less than once a year. During 2015, Governance and Nominating Committee met one time.

Compensation Committee

The Compensation Committee is responsible for overseeing our compensation and employee benefit plans (including those involving the issuance of our equity securities) and practices, including formulating, evaluating, and approving the compensation of our executive officers and reviewing and recommending to the full Board of Directors the compensation of our Chief Executive Officer. During 2015, our Compensation Committee consisted of three independent members of the Board of Directors, Charles Orsatti who serves as Chairman, John Andres, and Lawrence J. Waldman. The Compensation Committee meets as often as it determines necessary, but not less than once a year. During 2015, the Compensation Committee met four times.

Code of Ethics

On March 30, 2004 Bovie adopted a Code of Ethics for executive employees.

A copy of the code of ethics which expressly includes the CEO and CFO, is available on our website at http://boviemed.com/financials/Bovie_Code_of_Business_Conduct_and_Ethics_v2.pdf

ITEM 11. Executive Compensation Discussion and Analysis

General Compensation Philosophy

The primary objective of our compensation program for employees, including our compensation program for executive officers, is to attract, retain, and motivate qualified individuals and reward them in a manner that is fair to all stockholders. We strive to provide incentives for every employee that rewards them for their contribution to the Company.

Our compensation program is designed to be competitive with other employment opportunities and to align the interests of all employees, including executive officers, with the long-term interests of our stockholders. Historically, for our executive officers, we link a much higher percentage of total compensation to incentive compensation such as stock based compensation than we do for other employees.

With these objectives in mind, our Board has built executive and non-executive compensation programs that consist of three principal elements - base salary, performance bonuses, and grants of stock options and/or shares of restricted stock.

To understand the competitiveness of compensation arrangements provided to our named executive officers, in 2014 the Compensation Committee engaged Pearl Meyer & Partners to perform a competitive assessment of base salaries, bonuses for on-target performance, and grants of equity incentives. The competitive frame of reference for the study consisted of a group of pre-selected companies that were of comparable size and operated in our industry category. The group of companies utilized were:

In addition to the peer group, Pearl Meyer referenced industry-specific, size-adjusted market survey data where appropriate.

The results of the survey confirmed that, consistent with our desired philosophy, our compensation arrangements were competitive with the marketplace, with some variation by individual.

Compensation Program

Base Salary

We pay base salaries to our Named Executive Officers (as defined below) in order to provide a consistent, minimum level of pay that sustained individual performance warrants. We also believe that a competitive annual base salary is important to attract and retain an appropriate caliber of talent for each position over time.

The annual base salaries of our Named Executive Officers are determined by our Compensation Committee and approved by the Board of Directors. All salary decisions are based on each Named Executive Officer's level of responsibility, experience and recent and past performance, as determined by the Compensation Committee. The Compensation Committee benchmarks base salaries using a major independent consulting firm, and using their recommendations and other information the Committee evaluates and establishes the base compensation for our named executives.

Performance Bonus

The second component of executive compensation is performance bonuses which are earned when defined metrics are achieved.

For 2015, the Company established a combination of financial, operational, and personal objectives as the broad criteria that would determine annual performance bonus amounts for the year.