Attached files
Schedule 2
To Patent and Technology License Agreement dated December 3, 2012
December 2012 -
|
·
|
finalize agreements
|
|
·
|
incorporate newco
|
|
·
|
begin looking at new locations for system
|
|
·
|
begin looking at equipment for scale up
|
|
·
|
identify/purchase small coater to scale to larger than 2” size
|
|
·
|
purchase viscometer
|
|
·
|
purchase laptop for newco and project so Mike can work at either location
|
|
·
|
purchase raw materials for testing
|
|
·
|
purchase scale
|
|
·
|
purchase resistivity meter for checking electrical resistance
|
|
·
|
purchase annealing furnace to study the effects of heat on conductivity and reduction of the product, this will provide valuable information on what our final curing process will be.
|
Q1 2013
|
·
|
secure new space and begin move
|
|
·
|
receive small coater and put into service
|
|
·
|
receive any other purchased items
|
|
·
|
begin larger test coatings
|
|
·
|
upgrade computer for AFM and debug, Ben Price will be contracted for this work, AFM is a critical evaluation tool for our films.
|
|
·
|
SEM/TEM imaging performed off site
|
|
·
|
purchase raw materials for testing
|
|
·
|
begin testing viscosity at different loadings which is key to formulating
|
|
·
|
identify new deposition equipment, pumping system, and curing system
|
|
·
|
identify humidity testing equipment and purchase
|
|
·
|
identify if other equip is available at cost effective price which may ultimately reduce
|
|
·
|
our cost to get to market, the Konarka auction end of February.
|
|
·
|
If konaraka or others aren't viable, proceed with purchasing deposition, ink delivery, & curing systems.
|
These are the expensive parts unique to our process. We may need more funding to achieve this in Q1.
Q1 main goals –
1- move system to new home
2- identify and purchase deposition, pump, & curing equipment. If new, this could cost over $40K for deposition and pumping equipment, curing equipment would be more.
1
Q2 2013
|
·
|
install coater & facilitize
|
|
·
|
install deposition, pumping, & curing equipment
|
|
·
|
purchase raw materials for testing
|
|
·
|
begin trial runs
|
|
·
|
begin looking at binders and determine if needed
|
|
·
|
purchase dispersion & mixing equipment
|
|
·
|
SEM/TEM imaging performed off site
|
Q3 2013
|
·
|
verify reproducibility of system from batch to batch
|
|
·
|
begin engineering of process for specific applications, main targets are composites (including aerospace), biotech, & batteries.
|
|
·
|
Humidity testing of production
|
|
·
|
purchase raw materials for testing
|
|
·
|
begin looking at pre-pegging the material for composites
|
|
·
|
SEM/TEM imaging performed off site
|
Q4 2013
|
·
|
soft target – begin limited production, could be hindered if financing not readily available
|
|
·
|
continue debugging and process engineering as necessary
|
|
·
|
begin tailoring material for battery use
|
|
·
|
begin tailoring material for biotech use
|
|
·
|
SEM/TEM imaging performed off site
|
Q1 2014
Begin preproduction if not already there
hire equipment operator and train
purchase materials for production
begin test marketing if not already doing so
obtain proper insurances for operations
SEM/TEM imaging performed off site
Q2 2014
|
·
|
Begin limited production if not already producing
|
|
·
|
purchase raw materials
|
|
·
|
SEM/TEM imaging performed off site
|
·
|
sell, sell, sell
|
2