Attached files

file filename
EX-10.1 - EX-10.1 - ENPRO INDUSTRIES, INCg26724exv10w1.htm
 
 
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
Date of Report (date of earliest event reported): March 31, 2011
ENPRO INDUSTRIES, INC.
(Exact name of Registrant, as specified in its charter)
         
North Carolina   001-31225   01-0573945
         
(State or other jurisdiction
of incorporation)
  (Commission file number)   (I.R.S. Employer
Identification No.)
5605 Carnegie Boulevard, Suite 500
Charlotte, North Carolina 28209
(Address of principal executive offices, including zip code)
(704) 731-1500
(Registrant’s telephone number, including area code)
Not Applicable
(Former name or address, if changed since last report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
o Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
o Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
o Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
o Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))
 
 


 

Item 1.01 Entry into a Material Definitive Agreement.
     On March 31, 2011, EnPro Industries, Inc. (the “Company”) and its primary U.S. operating subsidiaries, other than Garlock Sealing Technologies LLC, amended the subsidiaries’ senior credit facility by entering into a Second Amended and Restated Loan and Security Agreement, dated as of March 31, 2011. The parties to this agreement, which we refer to as the credit agreement, are the financial institutions listed on the signature pages thereto, as lenders; Bank of America, N.A., as the agent and letter of credit issuer; Merrill Lynch, Pierce, Fenner & Smith Incorporated, as sole lead arranger and sole book manager; Coltec Industries Inc, Coltec Industrial Products LLC, GGB LLC, Corrosion Control Corporation, Stemco LP and STEMCO Kaiser Incorporated, as the borrowers; the Company, as parent and as a guarantor; and certain other of the Company’s U.S. subsidiaries, as subsidiary guarantors.
     As amended and restated, the credit agreement provides initially for a $125 million senior revolving credit facility. The credit facility includes a sublimit of $30 million for letters of credit. Borrowing availability under the credit facility is determined by reference to a borrowing base of specified percentages of eligible accounts receivable and inventory and is reduced by usage of the facility (including outstanding letters of credit) and any reserves.
     Under certain conditions, the borrowers may request that the facility be increased by up to $50 million, to $175 million total, which is referred to herein as a commitment increase. Any such commitment increase is subject to obtaining future lender commitments for those amounts, and no lender has any obligation to provide such commitments.
     Borrowings under the credit facility would be secured by specified assets of the borrowers, the Company and the subsidiary guarantors, primarily accounts receivable, inventory, deposit accounts (and cash deposits therein), intercompany loans, intellectual property and related contract rights, general intangibles related to any of the foregoing and proceeds. Subsidiary capital stock, real estate and other fixed assets are not included as collateral.
     The credit facility matures on August 16, 2015 unless, prior to that date, the Company’s convertible debentures are paid in full, refinanced on certain terms or defeased, in which case the facility will mature on March 30, 2016.
     Outstanding borrowings under the credit facility would initially bear interest at a rate equal to, at our option, either (1) a base/prime rate plus 1% or (2) the adjusted one, two, three or six-month LIBOR rate plus 2%. Pricing under the credit facility at any particular time will be determined by reference to a pricing grid based on average daily availability under the facility for the immediately prior fiscal quarter. Under the pricing grid, the applicable margins will range from 1.00% to 1.50% for base/prime rate loans and from 2.00% to 2.50% for LIBOR loans. The undrawn portion of the credit facility is subject to an unused line fee calculated at an annual rate ranging between 0.375% and 0.50%, depending on the level of outstanding borrowings. Outstanding letters of credit are subject to an annual fee equal to the applicable margin for LIBOR loans under the credit facility as in effect from time to time, plus a fronting fee on the aggregate undrawn amount of the letters of credit at an annual rate of 0.125%.

2


 

     The credit agreement contains customary covenants and restrictions for an asset-based credit facility, including negative covenants limiting certain: fundamental changes (such as merger transactions); loans; incurrence of debt other than specifically permitted debt; transactions with affiliates that are not on arm’s-length terms; incurrence of liens other than specifically permitted liens; repayment of subordinated debt (except for scheduled payments in accordance with applicable subordination documents); prepayments of other debt; dividends; asset dispositions other than as specifically permitted; and acquisitions and other investments other than as specifically permitted.
     However, in the event that the amount available for borrowing under the facility exceeds $20,000,000, the limitation on fixed asset dispositions is not applicable. Moreover, the limitations on acquisitions, investments in foreign subsidiaries, dividends (including those required to make payments on our convertible debentures), incurrence of certain cash collateral liens and prepayment of debt other than subordinated debt are generally not applicable if the following conditions are satisfied: the Borrowers have either (a) pro forma average borrowing availability under the credit facility greater than the greater of (i) the lesser of 25% of (A) the available borrowing base or (B) the aggregate commitments of the lenders under the credit facility or (ii) $20,000,000 or (b) (i) pro forma average borrowing availability under the credit facility greater than the greater of (A) the lesser of 20% of (I) the available borrowing base or (II) the aggregate commitments of the lenders under the credit facility or (B) $17,500,000, and (ii) maintained a pro forma fixed charge coverage ratio that is greater than 1.0 to 1.0.
     The credit facility also requires us to maintain a minimum fixed charge coverage ratio of 1.0 to 1.0 in the event the amount available for borrowing is less than an amount equal to the greater of (a) the lesser of 15% of (i) the available borrowing base or (ii) the aggregate commitments of the lenders under the credit facility or (b) $15,000,000 (which amount, in the event of any commitment increase, is increased by 12% of any such commitment increase).
     The credit facility contains events of default including, but not limited to, nonpayment of principal or interest, violation of covenants, breaches of representations and warranties, cross-default to other debt, bankruptcy and other insolvency events, material judgments, certain ERISA events, actual or asserted invalidity of loan documentation and certain changes of control of the Company.
     The credit agreement, which is filed as Exhibit 10.1 to this Current Report, is incorporated herein by reference.
Item 2.03 Creation of a Direct Financial Obligation or an Obligation Under an Off-Balance Sheet Arrangement of a Registrant.
The Company incorporates by reference the information in Item 1.01.

3


 

Item 9.01 Financial Statements and Exhibits.
     (c) Exhibits
  Exhibit 10.1    Second Amended and Restated Loan and Security Agreement, dated March 31, 2011, by and among Coltec Industries Inc, Coltec Industrial Products LLC, GGB LLC, Corrosion Control Corporation, Stemco LP and STEMCO Kaiser Incorporated, as Borrowers; EnPro Industries, Inc, as Parent; Coltec International Services Co, GGB, Inc., Stemco Holdings, Inc., Compressor Products Holdings, Inc. and Compressor Services Holdings, Inc., as Subsidiary Guarantors; the various financial institutions listed on the signature pages thereof, as Lenders; Bank of America, N.A., as Agent and Issuing Bank; and Merrill Lynch, Pierce, Fenner & Smith Incorporated, as Sole Lead Arranger and Sole Book Manager.

4


 

SIGNATURES
     Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
     Date: April 4, 2011
         
  ENPRO INDUSTRIES, INC.
 
 
  By:   /s/ Richard L. Magee    
    Richard L. Magee   
    Senior Vice President, General Counsel and Secretary   
 

5


 

EXHIBIT INDEX
         
Exhibit Number   Exhibit
  10.1    
Second Amended and Restated Loan and Security Agreement, dated March 31, 2011, by and among Coltec Industries Inc, Coltec Industrial Products LLC, GGB LLC, Corrosion Control Corporation, Stemco LP and STEMCO Kaiser Incorporated, as Borrowers; EnPro Industries, Inc, as Parent; Coltec International Services Co, GGB, Inc., Stemco Holdings, Inc., Compressor Products Holdings, Inc. and Compressor Services Holdings, Inc., as Subsidiary Guarantors; the various financial institutions listed on the signature pages thereof, as Lenders; Bank of America, N.A., as Agent and Issuing Bank; and Merrill Lynch, Pierce, Fenner & Smith Incorporated, as Sole Lead Arranger and Sole Book Manager.

6