Attached files

file filename
EX-31.3 - SECTION 302 CEO CERTIFICATION OF METALS USA, INC. - METALS USA INCdex313.htm
EX-31.4 - SECTION 302 CFO CERTIFICATION OF METALS USA, INC. - METALS USA INCdex314.htm
EX-31.1 - SECTION 302 CEO CERTIFICATION OF FLAG INTERMEDIATE HOLDINGS CORPORATION - METALS USA INCdex311.htm
EX-31.2 - SECTION 302 CFO CERTIFICATION OF FLAG INTERMEDIATE HOLDINGS CORPORATION - METALS USA INCdex312.htm
EX-32.4 - SECTION 906 CFO CERTIFICATION OF METALS USA, INC. - METALS USA INCdex324.htm
EX-18.1 - PREFERABILITY LETTER - METALS USA INCdex181.htm
EX-32.1 - SECTION 906 CEO CERTIFICATION OF FLAG INTERMEDIATE HOLDINGS CORPORATION - METALS USA INCdex321.htm
EX-12.1 - COMPUTATION OF RATIO OF EARNINGS TO FIXED CHARGES - METALS USA INCdex121.htm
EX-21.1 - LIST OF SUBSIDIARIES OF THE COMPANY - METALS USA INCdex211.htm
EX-32.3 - SECTION 906 CEO CERTIFICATION OF METALS USA, INC. - METALS USA INCdex323.htm
EX-10.10 - AMENDED AND RESTATED INVESTORS RIGHTS AGREEMENT - METALS USA INCdex1010.htm
EX-32.2 - SECTION 906 CFO CERTIFICATION OF FLAG INTERMEDIATE HOLDINGS CORPORATION - METALS USA INCdex322.htm
Table of Contents
Index to Financial Statements

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

 

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2010

Commission File Number 333-132918

 

 

FLAG INTERMEDIATE HOLDINGS CORPORATION

(Exact name of Registrant as Specified in its Charter)

 

 

 

 

Delaware   20-3779375

(State or other jurisdiction

of incorporation or organization)

 

(I.R.S. Employer

Identification Number)

2400 E. Commercial Blvd., Suite 905

Fort Lauderdale, Florida

  33308
(Address of Principal Executive Offices)   (Zip Code)

Commission File Number 1-13123

 

 

METALS USA, INC.

(Exact name of Registrant as Specified in its Charter)

 

 

 

Delaware   76-0533626

(State or other jurisdiction

of incorporation or organization)

 

(I.R.S. Employer

Identification Number)

2400 E. Commercial Blvd., Suite 905

Fort Lauderdale, Florida

  33308
(Address of Principal Executive Offices)   (Zip Code)

Registrant’s telephone number, including area code: (954) 202-4000

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act: None

 

 

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  x    No  ¨

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ¨    No  ¨

Indicate by check mark whether the Registrant submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer  ¨    Accelerated  filer  ¨    Non-accelerated filer  ¨    Smaller reporting company  ¨

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

There is no market for the Registrant’s common stock. As of March 11, 2011, 100 shares of the Registrant’s common stock were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

None.

OMISSION OF CERTAIN INFORMATION

Flag Intermediate Holdings Corporation and Metals USA, Inc. meet the conditions set forth in General Instruction 1(1)(a) and (b) of Form 10-K and are therefore filing this Form 10-K with the reduced disclosure format specified in General Instruction I(2) to Form 10-K.

 

 

 


Table of Contents
Index to Financial Statements

TABLE OF CONTENTS

 

   Part I   

Item 1.

  

Business

     5   

Item 1A.

  

Risk Factors

     17   

Item 1B.

  

Unresolved Staff Comments

     24   

Item 2.

  

Properties

     25   

Item 3.

  

Legal Proceedings

     27   

Item 4.

  

[Removed and Reserved]

     27   
   Part II   

Item 5.

  

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchasers of Equity Securities

     28   

Item 6.

  

Selected Financial Data

     29   

Item 7.

  

Management’s Discussion and Analysis of Financial Condition and Results of Operations

     30   

Item 7A.

  

Quantitative and Qualitative Disclosures about Market Risk

     49   

Item 8.

  

Financial Statements and Supplementary Data

     50   
  

Report of Independent Registered Public Accounting Firm

     50   
  

Consolidated Balance Sheets

     51   
  

Consolidated Statements of Operations

     52   
  

Consolidated Statements of Stockholder’s Equity and Comprehensive Income (Loss)

     53   
  

Consolidated Statements of Cash Flows

     54   
  

Notes to Consolidated Financial Statements

     55   

Item 9.

  

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

     87   

Item 9A.

  

Controls and Procedures

     87   

Item 9B.

  

Other Information

     87   
   Part III   

Item 10.

  

Directors, Executive Officers and Corporate Governance

     88   

Item 11.

  

Executive Compensation

     88   

Item 12.

  

Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters

     88   

Item 13.

  

Certain Relationships and Related Transactions, and Director Independence

     88   

Item 14.

  

Principal Accounting Fees and Services

     88   
   Part IV   

Item 15.

  

Exhibits, Financial Statement Schedules

     89   

Signatures

     90   

Index of Exhibits

     92   

 

2


Table of Contents
Index to Financial Statements

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains statements reflecting assumptions, expectations, projections, intentions or beliefs about future events that are intended as “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements included or incorporated by reference in this Annual Report, other than statements of historical fact, that address activities, events or developments that we expect, believe or anticipate will or may occur in the future are forward-looking statements. These statements appear in a number of places, including Item 1. “Business,” Item 1.A “Risk Factors,” Item 3. “Legal Proceedings” and Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” These statements represent our reasonable judgment on the future based on various factors and using numerous assumptions and are subject to known and unknown risks, uncertainties and other factors that could cause our actual results and financial position to differ materially from those contemplated by the statements. You can identify these statements by the fact that they do not relate strictly to historical or current facts. They use words such as “anticipate,” “believe,” “estimate,” “expect,” “forecast,” “may,” “should,” “plan,” “project” and other words of similar meaning. In particular, these include, but are not limited to, statements relating to the following:

 

   

our projected operating or financial results, including anticipated cash flows from operations and asset sale proceeds for 2011;

 

   

our expectations regarding capital expenditures, interest expense and other payments;

 

   

our beliefs and assumptions relating to our liquidity position, including our ability to adapt to changing market conditions; and

 

   

our ability to compete effectively for market share with industry participants.

Any or all of our forward-looking statements may turn out to be wrong. They can be affected by inaccurate assumptions or by known or unknown risks, uncertainties and other factors including, among others:

 

   

supply, demand, prices and other market conditions for steel and other commodities;

 

   

the timing and extent of changes in commodity prices;

 

   

the effects of competition in our business lines;

 

   

the condition of the steel and metal markets generally, which will be affected by interest rates, foreign currency fluctuations and general economic conditions;

 

   

the ability of our counterparties to satisfy their financial commitments;

 

   

tariffs and other government regulations relating to our products and services;

 

   

adverse developments in our relationship with both our key employees and unionized employees;

 

   

operational factors affecting the ongoing commercial operations of our facilities, including catastrophic weather-related damage, regulatory approvals, permit issues, unscheduled blackouts, outages or repairs, unanticipated changes in fuel costs or availability of fuel emission credits or workforce issues;

 

   

our ability to operate our businesses efficiently, manage capital expenditures and costs (including general and administrative expenses) and generate earnings and cash flow;

 

   

restrictive covenants in our indebtedness that may adversely affect our operational flexibility;

 

   

general political conditions and developments in the United States and in foreign countries whose affairs affect supply, demand and markets for steel, metals and metal products;

 

   

our ability to retain key employees; and

 

   

our expectations with respect to our acquisition activity.

 

3


Table of Contents
Index to Financial Statements

In addition, there may be other factors that could cause our actual results to be materially different from the results referenced in the forward-looking statements, some of which are included elsewhere in this Form 10-K, including in Item 1A, “Risk Factors,” and in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Many of these factors will be important in determining our actual future results. Consequently, no forward-looking statement can be guaranteed. Our actual future results may vary materially from those expressed or implied in any forward-looking statements. All forward-looking statements contained in this Form 10-K are qualified in their entirety by this cautionary statement. Forward-looking statements speak only as of the date they are made, and we disclaim any obligation to update any forward-looking statements to reflect events or circumstances after the date of this Form 10-K, except as otherwise required by applicable law.

 

4


Table of Contents
Index to Financial Statements

PART I

 

Item 1. Business

Overview

Flag Intermediate Holdings Corporation is a corporation formed under the laws of the state of Delaware (“Flag Intermediate”). Flag Intermediate and its wholly owned subsidiary, Metals USA, Inc. (“Metals USA”) are referred to collectively herein as the “Company.” Flag Intermediate and Metals USA are wholly owned subsidiaries of Metals USA Holdings Corp. (“Metals USA Holdings”).

As one of the largest metal service center businesses in the United States, we believe that we are a leading provider of value-added processed carbon steel, stainless steel, aluminum, red metals, manufactured metal components and inventory management services. We believe that we serve an important function as an intermediary between primary metal producers that generally sell large volumes in limited sizes and configurations and end-users that generally require more services and smaller quantities of customized products. Operating 39 facilities comprising approximately 5.1 million square feet of industrial space, our metal service center business sold more than 1,059 thousand tons of metal products in 2010. We sell our products and services to a diverse customer base and broad range of end-user markets, including the land and marine transportation, energy, aerospace, defense, electrical and appliance manufacturing, fabrication, furniture, commercial construction, and machinery and equipment industries, among several others, throughout the United States. We strive to earn a margin over the cost of metal. Management’s strategy, manifested through organic growth initiatives and our acquisitions of metal service center businesses, focuses on maximizing the margin we earn over the cost of metal by offering additional value-added processing services and diversifying our product mix. We believe our growth and acquisition strategy, in combination with management’s demonstrated ability to manage metal purchasing and inventories to consistently meet our customers’ high expectations for service and reliability, serves as a foundation for future revenue growth and stable operating profit per ton through the economic cycle.

We operate in three reportable business segments: Plates and Shapes Group, Flat Rolled and Non-Ferrous Group, and Building Products Group. Our Plates and Shapes and Flat Rolled and Non-Ferrous Groups perform customized, value-added processing services to unimproved steel and other metals required to meet specifications provided by our customers in addition to offering inventory management and just-in-time delivery services, among others. These services enable our customers to reduce material costs, decrease capital required for raw materials inventory and processing equipment, and save time, labor, warehouse space and other expenses. The customers of our Plates and Shapes and Flat Rolled and Non-Ferrous Groups are in the electrical and appliance manufacturing, fabrication, furniture, commercial construction, machinery and equipment, land and marine transportation, energy and aerospace industries. Our Building Products Group manufactures finished building products for distributors and contractors engaged in the residential remodeling industry.

On April 14, 2010, Metals USA Holdings completed its initial public offering of 11,426,315 shares of its common stock at $21.00 per share (the “IPO”), as described in Metals USA Holdings’ Registration Statement on Form S-1, as amended (File No. 333-150999). As a result of the IPO, the percentage of the Metals USA Holdings’ outstanding capital stock held by non-affiliates as of December 31, 2010, is approximately 31%. Investment funds associated with Apollo Management V L.P. (“Apollo Management” and together with its affiliated investment entities “Apollo” or “Apollo V”) own approximately 64% of the capital stock of Metals USA Holdings, with the remainder held by members of Metals USA Holdings’ management.

On May 18, 2005, Metals USA Holdings and its wholly owned subsidiary, Flag Acquisition Corporation, a Delaware corporation (“Flag Acquisition”), entered into an Agreement and Plan of Merger (the “Merger Agreement”) with Metals USA. On November 30, 2005, Flag Acquisition, then a wholly owned subsidiary of Flag Intermediate, merged with and into Metals USA (the “Merger”), with Metals USA being the surviving corporation. Flag Intermediate and Flag Acquisition conducted no operations during the period from May 9, 2005

 

5


Table of Contents
Index to Financial Statements

(date of inception) to November 30, 2005. As a result of the Merger, all of Metals USA’s issued and outstanding common stock is held indirectly by Metals USA Holdings through Flag Intermediate, its wholly owned subsidiary. Metals USA Holdings was formed by Apollo.

Metals USA was incorporated in Delaware on July 3, 1996, and began operations upon completion of an initial public offering on July 11, 1997. On November 14, 2001, our predecessor company filed for voluntary protection from its creditors under Chapter 11 of the United States Bankruptcy laws. We emerged from bankruptcy as a public company on October 31, 2002.

Flag Intermediate and its wholly owned subsidiary, Metals USA, are also referred to collectively herein as the “Successor Company” and Metals USA prior to the Merger is referred to as the “Predecessor Company.”

Growth Through Acquisitions

The Company has grown primarily through the strategic acquisition of metal service center businesses that complement its overall product and service base. The following acquisitions occurred over the last five years.

In May 2006, we bought Port City Metal Services (“Port City”) in Tulsa, Oklahoma. Port City increased our plate processing capabilities to customers serving the oil field, construction equipment and refining industries.

In June 2007, we acquired Lynch Metals, Inc. (“Lynch Metals”) with locations in Union, New Jersey and Anaheim, California. Lynch Metals provides value-added, specialized aluminum products to customers who are predominantly manufacturers of air/heat transfer products specifically focused on aerospace equipment, industrial and automotive applications.

In February 2009, we acquired VR Laser Services USA, Inc., which we subsequently renamed Philadelphia Plate (“Philadelphia Plate”), which further expanded our existing processing capabilities in the northeast region of the United States focused primarily on the marine and defense industries.

In June 2010, we acquired J. Rubin & Co. (“J. Rubin”), a metal service center business that operates in Illinois, Wisconsin and Minnesota with a broad mix of products and processing services that are provided to a diverse range of customer end markets.

In December 2010, we completed the acquisition of Ohio River Metal Services (“ORMS”), located in Jeffersonville, Indiana. ORMS operates a flat rolled metal service center that provides metal products and processing services to customers throughout the Ohio Valley.

On March 11, 2011, we completed the acquisition of The Richardson Trident Company (“Trident”). Trident is a general line metal service center with fabricating capabilities designed to service the oil and gas industry, and is also a wholesale distributor of metals, plastics and electronic parts with sales revenues for the twelve months ending December 31, 2010, of approximately $148.0 million. The Company operates under The Trident Company and The Altair Company trade names. Trident’s principal facility is in Richardson, Texas with branch locations in Houston, Austin, El Paso, Harlingen and Odessa, Texas; Tulsa, Oklahoma; Olathe, Kansas; Los Angeles, California; Boston, Massachusetts and Thomasville, Georgia.

Trident provides a broad range of metals and processing services with a product mix that emphasizes aluminum, stainless steel and nickel. The majority of Trident’s customer base operates in the oil and gas services sector. Processing services include precision sawing, boring, honing, slitting, sheeting, shearing and tuning. Trident also offers supply chain solutions such as just-in-time delivery and value-added components required by original equipment manufacturers (“OEMs”). As a result of the acquisition, we expect to expand our position as a leading integrated metals processor and distributor in additional markets, as well as enhance our non-ferrous and value-added processing product and service offerings.

 

6


Table of Contents
Index to Financial Statements

Products and Services, Markets and Industry Information

The Company’s businesses are managed on a decentralized basis operating in business segments based on product groups. We believe this product-oriented organizational structure facilitates the efficient advancement of our goals and objectives to achieve operational synergies and focused capital investment. Operational activities and policies are managed by corporate officers and key product group executives who, on average, have over 28 years of experience and are supported by finance, purchasing and sales and marketing staff. For additional industry segment information, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Results of Operations by Segment,” and Note 13 to our consolidated financial statements for the year ended December 31, 2010 included elsewhere in this report.

Metal Processing/Metal Service Center Businesses: Plates and Shapes and Flat Rolled and Non-Ferrous Groups

Industry Overview. Companies operating in the metals industry can generally be characterized as primary metal producers, metal processors/metal service centers or end-users. Our Plates and Shapes and Flat Rolled and Non-Ferrous Groups are metals processors/metal service centers. As such, we purchase carbon steel, stainless steel, aluminum, brass, copper and other metals from producing mills and then sell our metal processing services and the metal to our customers, who are generally end-users. We believe that both primary metals producers and end-users increasingly seek to have their metals processing and inventory management requirements met by value-added oriented metals processors/metal service centers like us.

Metal service centers function as key intermediaries between the primary metals producers that produce and sell larger volumes of metals in a limited number of sizes and configurations and end-users, such as fabricators, contractors and OEMs that require smaller quantities of more customized products delivered on a just-in-time basis. End-users incorporate processed metals into finished products, in some cases with little further modification.

In our Plates and Shapes and Flat Rolled and Non-Ferrous Groups, we engage in pre-production processing of carbon steel, stainless steel, red metals and aluminum. We purchase metals from primary producers, maintain an inventory of various metals to allow rapid fulfillment of customer orders and perform customized processing services to the specifications provided by end-users. By providing these services, as well as offering inventory management and just-in-time delivery services, we enable our customers to reduce overall production costs and decrease capital required for raw materials inventory and metals processing equipment. The Plates and Shapes and Flat Rolled and Non-Ferrous Groups contributed approximately 94% of our 2010 net sales.

Metal service centers and processors purchase approximately 35% of all the metals used in the U.S. and Canada and play an important intermediary role between the production mills and the end-users. Over the last several years primary metal producers have consolidated and focused on optimizing the throughput and operating efficiencies of their production facilities. We believe this consolidation among primary steel and aluminum producers over the last several years has expanded the demand for metal distribution and service centers, and in particular those service centers capable of providing additional value-added metal processing and inventory management services. Over 300,000 end-users nationwide rely on metal service centers for their primary supply of metal products and services. End-users generally buy metal products and services from metal service centers on a margin over the cost of the metal. When customers require additional processing or inventory management services, value-added metal service centers such as ours earn an additional premium margin over the cost of metal.

By outsourcing their customized metal processing and inventory management needs, end-users have the potential to realize significant economic benefits by shifting the responsibility for pre-production processing to metal service centers and leveraging service centers’ just-in-time delivery and other inventory management services. These supply-chain services, which are not normally provided by primary metals producers, enable end-users to reduce input, labor and other production costs, shorten lead times, and decrease required investments in working capital, manufacturing and warehouse facilities.

 

7


Table of Contents
Index to Financial Statements

We believe that long-term growth opportunities for metal service centers will continue to expand as both primary metal producers and end-users increasingly seek to have their metal processing and inventory management requirements met by value-added metal service centers. Although the service center industry remains fragmented with approximately 1,200 companies competing in North America, we believe larger service center businesses with greater scale and financial flexibility, like ours, enjoy significant advantages over smaller companies such as the ability to obtain higher discounts associated with volume purchases, the breadth of products and value-added services to meet the diverse needs of key end-use markets, and the more sophisticated logistics capabilities necessary to serve national accounts.

Plates and Shapes Group. The Plates and Shapes Group processes and sells steel plates and structural beams, bars, angles and tubes. We believe we are one of the largest distributors of steel plates and structural beams in the United States. In 2010, we sold approximately 509 thousand tons of products through 20 metal service centers located primarily in the southern and eastern regions of the United States. Our metal service centers are generally equipped to provide additional value-added processing, and a substantial portion of our volume is processed prior to being delivered to the end-user. These processing services include burning, blasting and painting (the process of cleaning steel plate by shot-blasting, then immediately applying a paint or primer), tee-splitting (the cutting of metal beams along the length to form separate pieces), cambering (the bending of structural shapes to improve load-bearing capabilities), leveling (the flattening of metals to uniform tolerances for proper machining), cutting, sawing, punching, drilling, beveling, surface grinding, braking (bending), shearing and cutting-to-length (the cutting of metals into pieces and along the width of a coil to create sheets or plates). We sell our products to a diversified customer base, including a large number of small customers who purchase products in small order sizes. We believe our disciplined management and hands-on service, backed by our national network of metal service centers, enables us to effectively meet our customers’ varied product and inventory management needs.

We generally earn additional margin from our customers by providing services such as product marking, item sequencing, just-in-time delivery and kitting. The customers who require these products and services are primarily in the fabrication, public and private non-residential construction, machinery and equipment, land and marine transportation, and energy industries. Because our metal service centers are generally located in close proximity to our metal suppliers and our customers, we are able to meet our customers’ product and service needs reliably and consistently. Over the last five years, we added two businesses to our Plates and Shapes portfolio through acquisitions. In May 2006, we completed the acquisition of Port City, which bolstered our presence in the construction and oil-field services sectors. In February 2009, we acquired Philadelphia Plate, which has expanded our presence in the northeast region of the United States and augmented our presence in the marine and defense sectors.

Flat Rolled and Non-Ferrous Group. The Flat Rolled and Non-Ferrous Group processes and sells flat rolled carbon and stainless steel, aluminum, brass and copper in a number of alloy grades and sizes through 19 metal service centers located primarily in the mid-western and southern regions of the United States. We sold approximately 558 thousand tons of these products in 2010, with our revenues split approximately 62% and 38% between ferrous products and non-ferrous products, respectively. Substantially all of the products from this group that are sold undergo value-added processing prior to shipment to our customers. These processing services include precision blanking (the process in which metal is cut into precise two-dimensional shapes), slitting (the cutting of coiled metals to specified widths along the length of the coil), shearing and cutting-to-length, punching and leveling.

We sell our products and services to customers in the electrical and appliance manufacturing, fabrication, furniture, machinery and equipment, transportation and aerospace industries. Many of our large customers purchase through pricing arrangements or contractual agreements that specify the margin over the cost of metal and we generally earn additional margin from these customers by providing services such as product marking and labeling, just-in-time delivery and kitting. We are able to provide these services reliably because our metal service centers are generally located in close proximity to our metal suppliers and our customers. Over the last

 

8


Table of Contents
Index to Financial Statements

five years, we added three businesses to our Flat Rolled and Non-Ferrous portfolio through acquisitions. In July 2007, we acquired Lynch Metals, a metal service center business that provides specialized aluminum products primarily to the aerospace, industrial and automotive industries. In June 2010, we acquired J. Rubin, expanding the scope of our product lines, services and geographic footprint in the upper Midwest, in addition to allowing us to enhance our cross-selling opportunities in existing markets. In December 2010, we acquired ORMS, a metal service center with distinctive processing and service capabilities and a strategic location in an existing Midwest market.

Product Mix. We provide a wide variety of metal products in different shapes and sizes to our customers. We actively manage our inventory levels and product mix in order to optimize the cost tradeoff between holding inventory and incurring a shortage situation. We strive to closely monitor our customer demand forecasts and coordinate our inventory levels and product mix with our customers’ production planning and scheduling. We also analyze macroeconomic data, end-use market data and historical usage to forecast the cyclical effect of inventory building and reduction in the industries we serve, adjusting our inventory levels and product mix accordingly. Our product mix also changes as a result of acquisitions. We believe the proactive management of our inventory levels and product mix, along with our expanding geographic footprint and diverse customer segments position us to maintain long-term profitability throughout the various stages of economic cycles. We believe that our focus on product mix enhancement helps us to mitigate the effects of uneven demand associated with specific regions and end-user industries.

Net sales by product line as a percent of total sales for our metal service center businesses for the three years ended December 31, 2010 were as follows:

 

     Twelve Months Ended
December 31,
 
     2010     2009     2008  

Carbon Flat Rolled Products

     35.1     31.5     28.5

Mini Mill Products

     11.2     10.9     10.7

Non-Ferrous Products

     21.9     20.0     18.4

Plate Products

     18.1     19.6     21.9

Structural Products

     13.7     18.0     20.5
                        
     100.0     100.0     100.0
                        

Value-Added Processing Services. Primary producers typically find it more cost effective to focus on large volume production and sale of metals in standard sizes and configurations to large volume purchasers. We process the metals to the precise length, width, shape and surface quality specified by our customers. Our value-added processes include:

 

   

Precision blanking—the process in which metal is cut into precise two-dimensional shapes.

 

   

Flame cutting—the cutting of metals to produce various shapes according to customer-supplied drawings.

 

   

Laser and plasma cutting—the cutting of metals to produce shapes under strict tolerance requirements.

 

   

Slitting—the cutting of coiled metals to specified widths along the length of the coil.

 

   

Blasting and painting—the process of cleaning steel plate by shot-blasting, then immediately applying a paint or primer.

 

   

Plate forming and rolling—the forming and bending of plates to cylindrical or required specifications.

 

   

Shearing and cutting to length—the cutting of metals into pieces and along the width of a coil to create sheets or plates.

 

   

Tee-splitting—the cutting of metal beams along the length to form separate pieces.

 

9


Table of Contents
Index to Financial Statements
   

Cambering—the bending of structural shapes to improve load-bearing capabilities.

 

   

Sawing—the cutting to length of bars, tubular goods and beams.

 

   

Leveling—the flattening of metals to uniform tolerances for proper machining.

 

   

Edge trimming—a process that removes a specified portion of the outside edges of coiled metal to produce uniform width and round or smooth edges.

 

   

Metallurgy—the analysis and testing of the physical and chemical composition of metals.

Our additional capabilities include applications engineering and other value-added processes such as custom machining. Using these capabilities, we use processed metals to manufacture higher-value components.

Once we receive an order, we select the appropriate inventory and schedule it for processing in accordance with the customer’s requirements and specified delivery date. Orders are monitored by our computer systems, including, in certain locations, the use of bar coding to aid in and reduce the cost of tracking material. We record the source of all metal shipped to customers. This enables us to identify the source of any metal which may later be shown to not meet industry standards or that fails during or after manufacture. This capability is important to our customers as it allows them to assign responsibility for non-conforming or defective metal to the mill that produced the metal. Many of the products and services we provide can be ordered and tracked through a web-based electronic network that directly connects our computer system to those of our customers.

We cooperate with our customers and tailor our deliveries to support their needs, which in many instances consist of short lead times, multiple daily deliveries, staged deliveries, or deliveries timed for immediate production. These “just-in-time” deliveries are defined by our customers and are generally intended to minimize their inventory investment and handling requirements.

While we ship products throughout the United States, most of our customers are located within a 250-mile radius of our facilities, thus enabling an efficient delivery system capable of handling a large number of short lead-time orders. We transport most of our products directly to our customers either with our own trucks for short-distance and/or multi-stop deliveries or through common or contract trucking companies.

We have quality control systems to ensure product quality and traceability throughout processing. Quality controls include periodic supplier audits, customer-approved quality standards, inspection criteria and metals source traceability. Twenty of our 39 metal service center facilities have International Standards for Organization, or “ISO” certification.

Building Products Group

The Building Products Group manufactures and sells roofing and patio products. We generally sell these products through a network of independent distributors and home improvement contractors. Our roofing products business manufactures and sells a high performance roofing product consisting of a pressed and stone-coated steel panel that mimics the appearance of traditional shake and tile roofing. Our roofing product is well suited for all areas subject to threats of high winds, fires and hail storms. In May 2006, we acquired Duraloc Roofing Systems, Ltd., a Canadian-based company which we have re-branded as Allmet Roofing Products. This acquisition provided us with manufacturing capabilities on both the east and west coasts of North America. Our patio products business manufactures and sells building components used primarily for the erection of residential shade structures such as patio covers and enclosures. With facilities located throughout the southern and western regions of the United States, we believe we are one of only a few suppliers of patio products with national scale.

The downturn in the United States housing sector has pushed home improvement remodeling spending below its long-term trend. We believe a recovering economy should stabilize house prices and consumer confidence levels, encouraging homeowners to reinvest in their homes and undertake deferred repairs,

 

10


Table of Contents
Index to Financial Statements

replacements and improvements. Low financing costs and a wave of previously foreclosed homes coming back on the market and in need of renovation could also contribute to growth. We believe these factors, coupled with an aging American housing stock, are generating significant pent-up demand for remodeling that should manifest itself when the housing sector rebounds (however, there can be no guarantee that demand for remodeling will increase or the timing of any such rebound).

Strategy

Our mission is to increase our position as one of the nation’s leading integrated metals processors and distributors, recognized for best in class customer service, optimal inventory management to meet customer demands and to ensure strategic use of our capital resources, continuing to strengthen the relationships we have with our suppliers, while constantly renewing our focus on safety, growth and profitability. Execution of the following strategies is critical to our success:

 

   

Expand Value-Added Services. We intend to continue to invest in capital projects that provide attractive returns and to continue to expand the value-added services we offer at each of our service center locations, a strategy we believe will both enhance our relationships with existing customers and help forge new customer relationships, both of which we believe will result in increased market share for us.

 

   

Increase Sales of Higher Margin Products and Services. The sale of higher margin products and services, which tend to have higher growth prospects and more stable demand, will continue to be one of our core strategies. We intend to continue executing on this strategy by increasing our core carbon offerings, non-ferrous volumes, and our sales of processed products.

 

   

Execute Strategic Acquisitions to Improve Our Business. We intend to continue to pursue acquisitions and we will generally target one to two “bolt-on” acquisitions per year that will enhance our metal service center strategy. We believe that we are well positioned to take advantage of acquisition opportunities in the fragmented service center industry because of our flexible capital structure.

 

   

Maintain and Strengthen Our Strong Relationships with Suppliers and Customers. As one of the largest metal service center businesses in the United States, we intend to use our relationships to leverage the opportunities presented by the consolidation of steel producers and the changing needs of our customers.

 

   

Continue Strong Focus on Inventory Management. We will continue managing our inventory to maximize our returns, profitability and cash flow while maintaining sufficient inventory to respond to our customers’ demands. Constant evaluation of our inventory management framework will allow us to continue supplying our customers reliably, even during periods of tight metal supply. We expect our inventory management framework will continue generating strong earnings during periods of rising metal prices and strong cash flow during periods of declining metal prices.

 

   

Maintain High Free Cash Flow Generation and Conversion. We believe that we are a reliable supplier, especially of higher margin products and services, to our customers even in periods of tight supply. We believe that our reliability allows us to generate higher margins and more stable operating income through the business cycle. Moreover, we believe our inventory management framework, bolstered by our relationships with our metals suppliers, will stabilize earnings during periods of weakness. Our core business also requires minimal maintenance capital investment. We believe these strengths taken together underscore our ability to generate high levels of free cash flow, which will enable us to reinvest in our business, consummate future acquisitions, reduce debt, and achieve other corporate and financial objectives.

 

   

Maintain Our Focus on Safety Throughout Our Operating Facilities. We remain committed to the belief that nothing is more important than the safety of our people and will continue our disciplined focus on constantly improving the safety performance of our operations.

Raw Materials and Supply

In recent years, steel, aluminum, copper and other metals production in the United States has fluctuated from period to period as mills attempt to match production to projected demand. Periodically, this has resulted in

 

11


Table of Contents
Index to Financial Statements

shortages of, or increased ordering lead-times for, some products, as well as fluctuations in price. Typically, metals producers announce price changes with sufficient advance notice to allow us to order additional products prior to the effective date of a price increase, or to defer purchases until a price decrease becomes effective. Our purchasing decisions are based on our forecast of the availability of metal products, ordering lead-times and pricing, as well as our prediction of customer demand for specific products.

We obtain the overwhelming majority of our metals from domestic suppliers, which include Nucor Corp., AK Steel, Arcelor-Mittal, North American Stainless, Steel Dynamics, and Gerdau Ameristeel. Although we have historically purchased approximately 10% to 15% of our raw material supplies from foreign producers, domestic suppliers have always been, and we believe will continue to be, our principal source of raw material.

Although most forms of steel and aluminum produced by mills can be obtained from a number of integrated mills or mini-mills, both domestically and internationally, there are a few products that are available from only a limited number of producers. Since most metals are shipped free-on-board and the transportation of metals is a significant cost factor, we generally seek to purchase metals, to the extent possible, from the nearest mill.

Steel producers have been undergoing rapid consolidation over the past several years. U.S. Steel, Nucor Corp. and Arcelor Mittal have acquired several of their domestic competitors, and international integrated producers have merged and consolidated operations. The result of this trend will be fewer integrated producers from which we can purchase our raw materials. We believe that global consolidation of the metals industry is beneficial to the metals industry as a whole by enhancing efficiency.

Sales and Marketing; Customers

We employ a sales force consisting of internal and external salespeople. Internal salespeople are primarily responsible for maintaining customer relationships, receiving and soliciting individual orders and responding to service and other inquiries by customers. Our external sales force is primarily responsible for identifying potential customers and calling on them to explain our services. We believe that our sales force is trained and knowledgeable about the characteristics and applications of various metals, as well as the manufacturing methods employed by our customers.

Our sales and marketing focus is on the identification of end-users that could achieve significant cost savings through the use of our inventory management, value-added processing, just-in-time delivery and other services. We use a variety of methods to identify potential customers, including the use of databases, direct mail and participation in manufacturers’ trade shows. Customer referrals and the knowledge of our sales force about regional end-users also result in the identification of potential customers. Once a potential customer is identified, our outside salespeople assume responsibility for visiting the appropriate contact, typically the purchasing manager or manager of operations.

Nearly all sales are on a negotiated price basis. In some cases, sales are the result of a competitive bid process where a customer provides a list of products, along with requirements, to us and several competitors and we submit a bid on each product. We have a diverse customer base, with no single customer accounting for more than 4% of our net sales in each of the last three years. Our ten largest customers represented less than 15% of our net sales in 2010. For the year ended December 31, 2010, the average transaction size for our metal service centers was approximately $3,130. We have sought to enhance our position in stable growth industries that demand additional value-added services and reduce our exposure to more cyclical sectors. Through our organic growth and acquisitions, we have capitalized on opportunities to augment our existing product and service portfolio with high value-added products such as aluminum brazing sheet, armor plate, marine grade aluminum plate, and pressure vessel plate to service the aerospace, marine, defense, and oil and gas industries. Our broad portfolio of high-quality metal products and customized value-added services allows us to offer one-stop shopping to our customers. We believe the breadth of our portfolio provides a significant competitive advantage over smaller metal service centers, which generally stock fewer products and offer fewer services than we do.

 

12


Table of Contents
Index to Financial Statements

LOGO

Competition

The metals distribution industry is highly fragmented and competitive. The North American metal service center industry generated approximately $107.5 billion in 2009 revenues from approximately 1,200 different companies that operate approximately 3,300 intermediate steel processors and metals service center facilities. Service centers compete with each other on price, service, quality and availability of products. Based on 2009 revenues, Metals USA is ranked number twelve among service centers in North America.

Markets are generally oriented on a regional and local basis. We have numerous competitors in each of our product lines and geographic locations. In every market we service we compete with various combinations of other large, value-added oriented metals processor/metal service centers some of which may have greater financial resources than we have, smaller metals processors/metal service centers and, to a much lesser extent, with primary metals producers, who typically sell to very large customers requiring regular shipments of large volumes of metals.

We compete with other companies on price, service, quality and availability of products. Our sales and services decisions are decentralized, providing local management the flexibility to quickly address local market conditions. Historically, we believe we have been able to compete effectively because of our high levels of service, broad-based inventory, knowledgeable and trained sales force, integrated computer systems, modern equipment, numerous locations, geographic dispersion, operational economies of scale and combined purchasing volume. Furthermore, we believe our liquidity and overall financial position affords us a good platform with which to compete with our peers in the industry.

Government Regulation and Environmental Matters

Our operations are subject to a number of federal, state and local regulations relating to the protection of the environment and to workplace health and safety. In particular, our operations are subject to extensive federal, state and local laws and regulations governing waste disposal, air and water emissions, the handling of hazardous substances, environmental protection, remediation, workplace exposure and other matters. Hazardous materials we use in our operations include general commercial lubricants and cleaning solvents. Among the more significant regulated activities that occur at some of our facilities are: the accumulation of scrap metal, which is sold for recycling; the generation of plant trash and other solid wastes and wastewaters, such as water from burning tables operated at some of our facilities, which wastes are disposed of in accordance with the Federal

 

13


Table of Contents
Index to Financial Statements

Water Pollution Control Act and the Resource Conservation and Recovery Act using third-party commercial waste handlers; and the storage, handling, and use of lubricating and cutting oils and small quantities of maintenance-related products and chemicals, the health hazards of which are communicated to employees pursuant to Occupational Safety and Health Act-prescribed hazard communication efforts and the disposal or recycling of which are performed pursuant to the Resource Conservation and Recovery Act.

Generally speaking, our facilities’ operations do not involve the types of emissions of air pollutants, discharges of pollutants to land or surface water, or treatment, storage, or disposal of hazardous waste which would ordinarily require federal or state environmental permits. Some of our facilities possess authorizations for air emissions from paints and coatings, hazardous materials permits under local fire codes or ordinances for the storage and use of small quantities of combustible materials such as oils or paints, and state or local permits for on-site septic systems. Our cost of obtaining and complying with such permits has not been and is not anticipated to be material. Our operations are such that environmental regulations typically have not required us to make significant capital expenditures for environmental compliance activities.

We believe that we are in substantial compliance with all applicable environmental and workplace health and safety laws and do not currently anticipate that we will be required to expend any substantial amounts in the foreseeable future in order to meet such requirements. However, some of the properties we own or lease are located in areas with a history of heavy industrial use, and are near sites listed on the Comprehensive Environmental Response, Compensation, and Liability Act (“CERCLA”) National Priority List. CERCLA establishes joint and several responsibility for clean-up without regard to fault for persons who have arranged for disposal of hazardous substances at sites that have become contaminated and for persons who own or operate contaminated facilities. We have a number of properties located in or near industrial or light industrial use areas; accordingly, these properties may have been contaminated by pollutants which would have migrated from neighboring facilities or have been deposited by prior occupants. Some of our properties are affected by contamination from leaks and drips of cutting oils and similar materials. The costs of clean-ups to date have not been material. We are not currently subject to any claims or notices with respect to clean-up or remediation under CERCLA or similar laws for contamination at our leased or owned properties or at any off-site location. However, we cannot rule out the possibility that we could be notified of such claims in the future. It is also possible that we could be identified by the Environmental Protection Agency, a state agency or one or more third parties as a potentially responsible party under CERCLA or under analogous state laws.

Management Information Systems

Both the Plates and Shapes Group and Flat Rolled and Non-Ferrous Group metal service centers use a system marketed and distributed specifically for the metal service center industry. During 2003, we completed a similar common-platform initiative in the Building Products Group. Some of our subsidiaries currently use electronic data interchange, through which they offer customers a paperless process with respect to order entry, shipment tracking, billing, remittance processing and other routine activities. Additionally, several of our subsidiaries also use computer-aided drafting systems to directly interface with computer-controlled metals processing, resulting in more efficient use of material and time.

We believe investment in uniform management information systems and computer-aided manufacturing technology permits us to respond quickly and proactively to our customers’ needs and service expectations. These systems are able to share data regarding inventory status, order backlog, and other critical operational information on a real-time basis.

Employees

As of December 31, 2010, we employed approximately 1,800 persons. As of December 31, 2010, approximately 168, or approximately 9% of our employees, at various sites were members of unions: the United Steelworkers of America; the Sheet Metals Workers Union; the International Association of Bridge, Structural,

 

14


Table of Contents
Index to Financial Statements

and Ornamental Ironworkers of America; and the International Brotherhood of Teamsters. Our relationship with these unions generally has been satisfactory. Within the last five years, we have not experienced any work stoppages at any of our facilities. We are currently a party to six collective-bargaining agreements. One expires in 2011 and five expire in 2013. Presently, we do not anticipate any problems or issues with respect to renewing these agreements upon acceptable terms. Historically, we have succeeded in negotiating new collective bargaining agreements without a strike and we expect to succeed in negotiating new collective bargaining agreements with respect to the agreement that expires in 2011.

From time to time, there are shortages of qualified operators of metals processing equipment. In addition, during periods of low unemployment, turnover among less-skilled workers can be relatively high. We believe that our relations with our employees are satisfactory.

See “Risk Factors—Our ability to retain our key employees is critical to the success of our business, and failure to do so may adversely affect our revenues and as a result could materially adversely affect our business, financial condition, results of operations and cash flows” and “Risk Factors—Adverse developments in our relationship with our unionized employees could adversely affect our business.”

Vehicles

We operate a fleet of owned or leased trucks and trailers, as well as forklifts and support vehicles. We believe these vehicles are generally well maintained and adequate for our current operations.

Risk Management and Insurance

The primary risks in our operations are bodily injury, property damage and vehicle liability. We maintain general and vehicle liability insurance, liability insurance for bodily injury and property damage and workers’ compensation coverage, which we consider sufficient to protect us against a catastrophic loss due to claims associated with these risks.

Safety

Our goal is to provide an accident-free workplace. We are committed to continuing and improving upon each facility’s focus and emphasis on safety in the workplace. Our safety program includes regular weekly or monthly field safety meetings and training sessions to teach proper safety procedures. A comprehensive “best practices” safety program which has been implemented throughout our operations ensures that all employees comply with our safety standards, as well as those established by our insurance carriers, and federal, state and local laws and regulations. This program is led by the corporate office, with the assistance of each of our product group presidents, executive officers and industry consultants with expertise in workplace safety. We have experienced improvements in our safety record in four of the last five years. Furthermore, the Compensation Committee of our Board of Directors considers workplace safety as an important factor in determining the annual bonus amounts awarded to our executive officers.

Financial Information About Segments

For information regarding revenues from external customers, measures of profit or loss and total assets for the last three years for each segment, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Results of Operations by Segment” and Note 13 to our consolidated financial statements for the year ended December 31, 2010.

Patents, Trademarks and Other Intellectual Property Rights

We own several U.S. patents, trademarks, service marks and copyrights. Certain of the trademarks and patents are registered with the U.S. Patent and Trademark Office and, in some cases, with trademark offices of foreign countries. We consider other information owned by us to be trade secrets. We protect our trade secrets

 

15


Table of Contents
Index to Financial Statements

by, among other things, entering into confidentiality agreements with our employees and implementing security measures to restrict access to such information. We believe that our safeguards provide adequate protection to our proprietary rights. While we consider all of our intellectual property to be important, we do not consider any single intellectual property right to be essential to our operations as a whole.

Seasonal Aspects, Renegotiation and Backlog

There is a slight decrease in our business during the winter months because of inclement weather conditions and the impact on the construction industry. No material portion of our business is subject to renegotiation of profits or termination of contracts at the election of the government. Because of the just-in-time delivery policy and the short lead-time nature of our business, we do not believe the information on backlog of orders is material to an understanding of our business.

Foreign Operations

We do not have any material long-term assets or customer relationships outside of the United States. We have no material foreign operations or subsidiaries.

Research and Development

We do not incur material expenses in research and development activities but do participate in various research and development programs. We address research and development requirements and product enhancement by maintaining a staff of technical support, quality assurance and engineering personnel.

Communication with the Company

The Company’s required Securities and Exchange Act filings such as annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports are available free of charge through the Company’s website, http://www.metalsusa.com., as soon as reasonably practicable after they have been filed with or furnished to the Securities and Exchange Commission (the “SEC”). All of these materials are located at the “Investor Relations” link. They can also be obtained free of charge upon request to the Company’s principal address: Metals USA Holdings Corp., 2400 E. Commercial Blvd., Suite 905, Fort Lauderdale, Florida 33308.

 

16


Table of Contents
Index to Financial Statements
Item 1A. Risk Factors

In addition to the factors discussed elsewhere in this report and in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” the following are some of the potential risk factors that could cause our actual results to differ materially from those projected in any forward-looking statements. You should carefully consider the risk factors set forth below, as well as other information contained in this document, when evaluating your investments in our securities. Any of the following risks could materially and adversely affect our business, financial condition or results of operations.

Our business, financial condition, results of operations and cash flows are heavily affected by changing metal prices. We believe metal prices are currently increasing from a low point in the cycle toward a new high point in the cycle (which may not continue).

Metals costs typically represent approximately 75% of our net sales. Metals costs can be volatile due to numerous factors beyond our control, including domestic and international economic conditions, labor costs, production levels, competition, import duties and tariffs and currency exchange rates. This volatility can significantly affect the availability and cost of raw materials for us and may, therefore, adversely affect our net sales, operating margin and net income. Our metal service centers maintain substantial inventories of metal to accommodate the short lead-times and just-in-time delivery requirements of our customers. Accordingly, using information derived from customers, market conditions, historic usage and industry research, we purchase metal in an effort to maintain our inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers. Our commitments for metal purchases are generally at prevailing market prices in effect at the time we place our orders. We have no substantial long-term, fixed-price purchase contracts. When raw material prices rise, we may not be able to pass the price increase on to our customers. When raw material prices decline, customer demands for lower prices could result in lower sale prices and, to the extent we reduce existing inventory quantities, lower margins. There have been historical periods of rapid and significant movements in the prices of metal both upward and downward. These changes can make it difficult for us to accurately forecast our results, which could cause us to have higher or lower levels of inventory than required or make expenditures that may not generate expected returns. Any limitation on our ability to pass through any price increases to our customers could have a material adverse effect on our business, financial condition, results of operations or cash flows.

Metal prices generally change in response to changes in supply, demand or raw material input costs. During the first half of 2009, demand declined in reaction to a slowing economy and metal prices dropped in response. Beginning in the late second quarter of 2009 and continuing through the end of 2010, raw material input costs have generally been increasing and, as a result, metal prices have been increasing. There are no indications regarding how long this aspect of the cycle will continue.

Changes in metal prices (which we believe are currently increasing but which may not continue) also affect our liquidity because of the time difference between our payment for our raw materials and our collection of cash from our customers. We sell our products and typically collect our accounts receivable within 45 days after the sale; however, we tend to pay for replacement materials (which are more expensive when metal prices are rising) over a much shorter period, in part to benefit from early-payment discounts. As a result, when metal prices are rising, we tend to draw more on our $500 million amended and restated senior secured asset-based credit facility due 2015 (the “ABL facility”) to cover the cash flow cycle from our raw material purchases to cash collection. This cash requirement for working capital is higher in periods when we are increasing inventory quantities. Our liquidity is thus adversely affected by rising metal prices. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Operating and Investing Activities.”

 

17


Table of Contents
Index to Financial Statements

Our operating results and liquidity could be negatively affected during economic downturns because the demand for our products is cyclical. We believe demand for our product is currently in the lower end of the cycle, although conditions have steadily improved throughout the latter half of 2009 through year-end 2010 but which may not continue.

Many of our products are used in businesses that are, to varying degrees, cyclical and have historically experienced periodic downturns due to economic conditions, energy prices, consumer demand and other factors beyond our control. These economic and industry downturns have been characterized by diminished product demand, excess capacity and, in some cases, lower average selling prices for our products. The recent economic downturn and uncertainty about current global economic conditions pose risks as businesses in one or more of the markets that we serve, or consumers in one or more of the end-use markets that our customers serve, may postpone purchases in response to tighter credit, negative financial news and/or declines in asset values, which could have a material adverse effect on the demand for our products and services and on our financial condition, results of operations or cash flows. Additionally, as an increasing amount of our customers relocate their manufacturing facilities outside of the United States, we may not be able to maintain our level of sales to those customers.

More recently, the decline in steel prices resulting from weakened demand and an oversupply of steel throughout the supply chain during the latter half of 2008 and first half of 2009 contributed to a significant decline in steel product shipments from metals service centers in the U.S in year-over-year comparisons. Reduced demand in a number of our markets combined with the foreign relocation of some of our customers could have an adverse effect on our business, financial condition, results of operations or cash flows.

Our customers sell their products abroad, and some of our suppliers buy feedstock abroad. As a result, our business is affected by general economic conditions and other factors outside the United States, primarily in Europe and Asia. Our suppliers’ access to metal, and therefore our access to metal, is additionally affected by such conditions and factors. Similarly, the demand for our customers’ products, and therefore our products, is affected by such conditions and factors. These conditions and factors include enhanced imbalances in the world’s iron ore, coal and steel industries, a downturn in world economies, increases in interest rates, unfavorable currency fluctuations or a slowdown in the key industries served by our customers. In addition, demand for the products of our Building Products Group has been adversely affected by the downturn in the U.S. housing market, since the results of that group depend on a strong residential remodeling industry, which in turn has been historically driven by an expansion in the broader housing market and relatively high consumer confidence.

We rely on metal suppliers in our business and purchase a significant amount of metal from a limited number of suppliers and termination of one or more of our relationships with any of them could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We use a variety of metals in our business. Our operations depend upon obtaining adequate supplies of metal on a timely basis. We purchase most of our metal from a limited number of metal suppliers. As of December 31, 2010, our top three metals suppliers represent a significant portion of our total metal purchasing cost. Termination of our relationship with any of these suppliers could have a material adverse effect on our business, financial condition, results of operations or cash flows if we were unable to obtain metal from other sources in a timely manner.

In addition, the domestic metals production industry has experienced consolidation in recent years. Further consolidation could result in a decrease in the number of our major suppliers or a decrease in the number of alternative supply sources available to us, which could make it more likely that termination of one or more of our relationships with major suppliers would result in a material adverse effect on our business, financial condition, results of operations or cash flows. Consolidation could also result in price increases for the metal that we purchase. Such price increases could have a material adverse effect on our business, financial condition, results of operations or cash flows if we were not able to pass these price increases on to our customers.

 

18


Table of Contents
Index to Financial Statements

Intense competition in our fragmented industry could adversely affect our profitability.

We are engaged in a highly fragmented and competitive industry. We compete with a large number of other value-added oriented metals processor/metal service centers on a regional and local basis, some of which may have greater financial resources than we have. The North American metal service center industry generated approximately $107.5 billion in 2009 revenues from approximately 1,200 different companies that operate approximately 3,300 intermediate steel processors and metals service center facilities. Service centers compete with each other on price, service, quality and availability of products. Based on 2009 revenues, Metals USA is ranked number twelve among service centers in North America. We also compete, to a much lesser extent, with primary metals producers, who typically sell to very large customers requiring regular shipments of large volumes of metals. Because price, particularly in the ferrous flat rolled business, is a competitive factor, we may be required in the future to reduce sales volumes to maintain our level of profitability. Increased competition in any of our businesses could have a material adverse effect on our business, financial condition, results of operations or cash flows.

Our ability to retain our key employees is critical to the success of our business, and failure to do so may adversely affect our revenues and as a result could materially adversely affect our business, financial condition, results of operations and cash flows.

We are dependent on the services of our Chief Executive Officer and other members of our senior management team to remain competitive in our industry. We may not be able to retain or replace one or more of these key employees, we may suffer an extended interruption in one or more of their services or we may lose the services of one or more of these key employees entirely. Our current key employees are subject to employment conditions or arrangements that permit the employees to terminate their employment without notice. Other than a life insurance policy maintained by us on our Chief Executive Officer, for which we are the beneficiary, we do not maintain any life insurance policies for our key employees. If any of our key employees were not able to dedicate adequate time to our business, due to personal or other factors, if we lose or suffer an extended interruption in the services of any of our key employees or if any of our key employees were to terminate their employment it could have a material adverse effect on our business, financial condition, results of operations or cash flows. In addition, the market for qualified individuals may be highly competitive and we may not be able to attract and retain qualified personnel to replace or succeed members of our senior management or other key employees, should the need arise.

From time to time, there are shortages of qualified operators of metals processing equipment. In addition, during periods of low unemployment, turnover among less-skilled workers can be relatively high. Any failure to retain a sufficient number of such employees in the future could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We are subject to litigation that could strain our resources and distract management.

From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. These suits concern issues including product liability, contract disputes, employee-related matters and personal injury matters. It is not feasible to predict the outcome of all pending suits and claims, and the ultimate resolution of these matters as well as future lawsuits could have a material adverse effect on our business, financial condition, results of operations or cash flows or reputation.

Environmental costs could decrease our net cash flow and adversely affect our profitability.

Our operations are subject to extensive regulations governing waste disposal, air and water emissions, the handling of hazardous substances, remediation, workplace exposure and other environmental matters. Some of the properties we own or lease are located in areas with a history of heavy industrial use, and are near sites listed for clean up under CERCLA. See “Business—Government Regulation and Environmental Matters.” CERCLA established joint and several responsibility for clean-up without regard to fault for persons who have arranged for

 

19


Table of Contents
Index to Financial Statements

disposal of hazardous substances at sites that have become contaminated and for persons who own or operate contaminated facilities. We have a number of properties located in or near industrial or light industrial use areas; accordingly, these properties may have been contaminated by pollutants which would have migrated from neighboring facilities or have been deposited by prior occupants. Some of our properties are affected by contamination from leaks and drips of cutting oils and similar materials. The costs of clean-ups to date have not been material. It is possible that we could be notified of such claims in the future. See “Business—Government Regulation and Environmental Matters.” It is also possible that we could be identified by the Environmental Protection Agency, a state agency or one or more third parties as a potentially responsible party under CERCLA or under analogous state laws. If so, we could incur substantial costs related to such claims, which could decrease our net cash flows and adversely affect our profitability.

Adverse developments in our relationship with our unionized employees could adversely affect our business.

As of December 31, 2010, approximately 168 of our employees (approximately 9%) at various sites were members of unions. We are currently a party to six collective-bargaining agreements. One expires in 2011 and five expire in 2013. Presently we do not anticipate any problems or issues with respect to renewing these agreements upon acceptable terms. However, no assurances can be given that we will succeed in negotiating new collective-bargaining agreements to replace the expiring ones without a strike. Any strikes in the future could have a material adverse effect on our business, financial condition, results of operations or cash flows. See “Business—Employees” for a discussion of our previous negotiations of collective-bargaining agreements.

We may not successfully implement our acquisition strategy, and acquisitions that we pursue may present unforeseen integration obstacles and costs, increase our leverage and negatively impact our performance.

We intend to continue to pursue our acquisition strategy, and we generally target one to two “bolt-on” acquisitions per year that will enhance our metal service center strategy. We may not be able to identify suitable acquisition candidates, and if we do identify suitable candidates, they may be larger than our historical targets. The expense incurred in consummating acquisitions of related businesses, or our failure to integrate such businesses successfully into our existing businesses, could affect our growth or result in our incurring unanticipated expenses and losses. Furthermore, we may not be able to realize any anticipated benefits from acquisitions. We regularly evaluate potential acquisitions and may complete one or more significant acquisitions in the future. To finance an acquisition, we may incur debt or issue equity, both of which could be materially greater amounts than in connection with prior acquisitions. The process of integrating acquired operations into our existing operations may result in unforeseen operating difficulties and may require significant financial resources that would otherwise be available for the ongoing development or expansion of existing operations. Some of the risks associated with our acquisition strategy which could have an adverse effect on our business, financial condition, results of operations and cash flows, include:

 

   

potential disruption of our ongoing business and distraction of management;

 

   

unexpected loss of key employees or customers of the acquired company;

 

   

conforming the acquired company’s standards, processes, procedures and controls with our operations;

 

   

coordinating new product and process development;

 

   

hiring additional management and other critical personnel;

 

   

encountering unknown contingent liabilities that could be material; and

 

   

increasing the scope, geographic diversity and complexity of our operations.

As a result of the foregoing, our acquisition strategy may not be successfully received by customers, and we may not realize any anticipated benefits from acquisitions.

 

20


Table of Contents
Index to Financial Statements

We may not be able to retain or expand our customer base if the North American manufacturing industry continues to erode through moving offshore or through acquisition and merger or consolidation activity in our customers’ industries.

Our customer base, including our Flat Rolled and Non-Ferrous Group’s customer base, primarily includes manufacturing and industrial firms. Some of these customers operate in industries that are undergoing consolidation through acquisition and merger activity; some are considering or have considered relocating production operations overseas or outsourcing particular functions overseas; and some customers have closed as they were unable to compete successfully with overseas competitors. Our facilities are predominately located in the mid-western and southern United States. To the extent that these customers cease U.S. operations, relocate or move operations overseas to regions in which we do not have a presence, we could lose their business. In addition, acquirers of manufacturing and industrial firms may have suppliers of choice that do not include us, which could affect our customer base and sales.

We may face product liability claims that are costly and create adverse publicity.

If any of the products that we sell cause harm to any of our customers, we could be exposed to product liability lawsuits. If we were found liable under product liability claims, we could be required to pay substantial monetary damages. Further, even if we successfully defended ourselves against this type of claim, we could be forced to spend a substantial amount of money in litigation expenses, our management could be required to spend valuable time to defend against these claims and our reputation could suffer, any of which could harm our business.

We may not be able to generate sufficient cash to service all of our indebtedness.

Our ability to make payments on our indebtedness depends on our ability to generate cash in the future. Our 11 1/8 Senior Secured Notes due 2015 (the “Metals USA Notes”), the ABL facility and our other outstanding indebtedness are expected to account for significant cash interest expenses in fiscal 2011 and subsequent years. Accordingly, we will have to generate significant cash flows from operations to meet our debt service requirements. If we do not generate sufficient cash flow to meet our debt service and working capital requirements, we may need to seek additional financing; however, this insufficient cash flow may make it more difficult for us to obtain financing on terms that are acceptable to us, or at all. Furthermore, Apollo has no obligation to provide us with debt or equity financing and we therefore may be unable to generate sufficient cash to service all of our indebtedness.

Our use of leverage exposes us to interest rate risk and could adversely affect our ability to raise additional capital to fund our operations, limit our ability to react to changes in the economy or our industry and prevent us from meeting our obligations under our indebtedness.

As of December 31, 2010, our total indebtedness was $393.5 million. We also had an additional $161.5 million available for borrowing under the ABL facility as of that date.

Our indebtedness could have important consequences for you, including:

 

   

it may limit, along with the financial and other restrictive covenants in our indebtedness, among other things, our ability to borrow money, dispose of assets or sell equity for our working capital, capital expenditures, dividend payments, debt service requirements, strategic initiatives or other purposes;

 

   

it may limit our flexibility in planning for, or reacting to, changes in our operations or business;

 

   

we may be more highly leveraged than some of our competitors, which may place us at a competitive disadvantage;

 

   

it may make us more vulnerable to downturns in our business or the economy; and

 

21


Table of Contents
Index to Financial Statements
   

there would be a material adverse effect on our business, financial condition, results of operations or cash flows if we were unable to service our indebtedness or obtain additional financing, as needed.

Our debt agreements impose significant operating and financial restrictions, which could have a material adverse effect on our business, financial condition, results of operations or cash flows.

The ABL facility and the indentures governing the Metals USA Notes contain various covenants that limit or prohibit our ability, among other things, to:

 

   

incur or guarantee additional indebtedness or issue certain preferred shares;

 

   

pay dividends on our capital stock or redeem, repurchase, retire or make distributions in respect of our capital stock or subordinated indebtedness or make other restricted payments;

 

   

enter into or permit certain agreements or make certain investments or loans;

 

   

sell certain assets;

 

   

create or incur liens; and

 

   

enter into certain transactions with our affiliates.

The indenture governing the Metals USA Notes contains covenants that restrict our ability to take certain actions, such as incurring additional debt, if we are unable to meet defined adjusted EBITDA to fixed charges and consolidated total debt ratios (each, as defined by the applicable indenture). The covenants in the indenture require us to have an adjusted EBITDA to fixed charge ratio (measured on a trailing four-quarter basis) of 2.0 to 1.0 to incur “ratio” indebtedness and a consolidated total debt ratio of no greater than 4.75 to 1.0 to incur “ratio” indebtedness in connection with acquisitions. Based on the calculations for the trailing four quarters, we are able to satisfy these covenants and incur additional indebtedness under these ratios, including for acquisition purposes, under our indenture.

As of December 31, 2010, our fixed charge coverage ratio (“FCCR”), as defined by the loan and security agreement governing the ABL facility, was 2.44. As of December 31, 2010 we had $161.5 million of additional borrowing capacity under the ABL facility. Failure to comply with the FCCR covenant of the ABL facility can result in limiting our long-term growth prospects by hindering our ability to incur future indebtedness or grow through acquisitions. We do not have to maintain a minimum FCCR as long as our borrowing availability under the ABL facility is greater than or equal to the greater of (i) $45.0 million and (ii) 10% of the lesser of the borrowing base and the aggregate commitment (the “Minimum Availability”). We must maintain an FCCR of at least 1.0 to 1.0 if borrowing availability falls below the Minimum Availability.

Our inability to satisfy the terms of the negative covenants in our debt agreements do not, by themselves, constitute covenant violations or events of default. Rather, they are event-related restrictions that limit or prohibit the Company from taking certain corporate actions. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Covenant Compliance.”

The restrictions contained in the agreements that govern the terms of our debt could:

 

   

limit our ability to plan for or react to market conditions or meet capital needs or otherwise restrict our activities or business plans;

 

   

adversely affect our ability to finance our operations, to enter into strategic acquisitions, investments or other capital needs or to engage in other business activities that would be in our interest; and

 

   

limit our access to the cash generated by our subsidiaries.

Upon the occurrence of an event of default under the ABL facility, the lenders could elect to declare all amounts outstanding under the ABL facility to be immediately due and payable and terminate all commitments

 

22


Table of Contents
Index to Financial Statements

to extend further credit. If we were unable to repay those amounts, the lenders under the ABL facility could proceed against the collateral granted to them to secure the ABL facility on a first-priority lien basis. If the lenders under the ABL facility accelerate the repayment of borrowings, such acceleration could have a material adverse effect on our business, financial condition, results of operations or cash flows. In addition, we may not have sufficient assets to repay the Metals USA Notes upon acceleration.

For a more detailed description on the limitations on our ability to incur additional indebtedness, please see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Financing Activities.”

Despite our current indebtedness, we may still be able to incur significantly more indebtedness which could have a material adverse effect on our business, financial condition or results of operations.

The terms of the Metals USA Notes indenture and the ABL facility contain restrictions on our ability to incur additional indebtedness. These restrictions are subject to a number of important qualifications and exceptions, and the indebtedness incurred in compliance with these restrictions could be substantial. Accordingly, we or our subsidiaries could incur significant additional indebtedness in the future. As of December 31, 2010, we had approximately $161.5 million available for additional borrowing under the ABL facility, including the subfacility for letters of credit, and the covenants under our debt agreements would allow us to borrow a significant amount of additional indebtedness. In addition, the Metals USA Notes indenture does not limit the amount of indebtedness that may be incurred by Flag Intermediate or Metals USA Holdings. Additional leverage could have a material adverse effect on our business, financial condition or results of operations and could increase the risks described in “—Our use of leverage exposes us to interest rate risk and could adversely affect our ability to raise additional capital to fund our operations, limit our ability to react to changes in the economy or our industry and prevent us from meeting our obligations under our indebtedness,” “—Our debt agreements impose significant operating and financial restrictions, which could have a material adverse effect on our business, financial condition, results of operations or cash flows” and “—Because a portion of our indebtedness bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, we are vulnerable to interest rate increases.”

Because a portion of our indebtedness bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, we are vulnerable to interest rate increases.

A portion of our indebtedness bears interest at rates that fluctuate with changes in certain short-term prevailing interest rates. As of December 31, 2010, we had approximately $119.4 million of floating rate debt under the ABL facility and our Industrial Revenue Bonds (“IRBs”). We also had an additional $161.5 million available for borrowing under the ABL facility as of December 31, 2010. Assuming a consistent level of debt, a 100 basis point change in the interest rate on our floating rate debt effective from the beginning of the year would increase or decrease our fiscal 2010 interest expense under the ABL facility and the IRBs by approximately $1.2 million. We use derivative financial instruments to manage a portion of the potential impact of our interest rate risk. As of December 31, 2010, we had $106.0 million of outstanding advances on the ABL facility and $7.7 million of IRBs, which represented approximately 29% of our total indebtedness, that were hedged under interest rate swap agreements. To some extent, derivative financial instruments can protect against increases in interest rates, but they do not provide complete protection over the longer term. If interest rates increase dramatically, we could be unable to service our debt which could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We are controlled by Apollo and its affiliates, and their interests as equity holders may conflict with yours.

We are an affiliate of, and are controlled by, Apollo and its affiliates. The interests of Apollo and its affiliates may not always be aligned with yours. For example, Apollo may have an interest in pursuing acquisitions, divestitures, financings or other transactions that, in their judgment, could enhance their equity

 

23


Table of Contents
Index to Financial Statements

investment, even though these transactions might involve risks to the non-affiliated holders of our common stock or holders of our debt if the transactions resulted in our being more highly leveraged or significantly changed the nature of our business operations or strategy. In addition, if we encounter financial difficulties, or if we are unable to pay our debts as they mature, the interests of Apollo might conflict with those of the non-affiliated holders of our common stock or the holders of our debt. In that situation, for example, the non-affiliated holders of our common stock or the holders of our debt might want us to raise additional equity to reduce our leverage and pay our debts, while Apollo might not want to increase their investment in us or have their ownership diluted and instead choose to take other actions, such as selling our assets. Furthermore, Apollo and its affiliates have no continuing obligation to provide us with debt or equity financing. Additionally, Apollo and certain of its affiliates are in the business of making investments in businesses engaged in the metals service industry that complement or directly or indirectly compete with certain portions of our business.

Further, if they pursue such acquisitions in the metals service industry, those acquisition opportunities may not be available to us. So long as Apollo and its affiliates continue to indirectly own a significant amount of the equity of Metals USA Holdings Corp., our parent company, even if such amount is less than 50%, they will continue to be able to strongly influence or effectively control our business decisions.

 

Item 1B. Unresolved Staff Comments

None.

 

24


Table of Contents
Index to Financial Statements
Item 2. Properties

Properties

As of December 31, 2010, we operated 20 metal service centers in the Plates and Shapes Group and 19 facilities in the Flat Rolled and Non-Ferrous Group. These facilities use various metals processing and materials handling machinery and equipment. As of the same date, our Building Products Group operated four manufacturing plants where we process metals into various building products and 17 sales centers.

Many of our facilities are capable of being used at higher capacities, if necessary. We believe that our facilities will be adequate for the expected needs of our existing businesses over the next several years. Our metal service center facilities, Building Products sales centers and manufacturing plants, and administrative offices are located and described as follows:

OPERATING FACILITIES AS OF DECEMBER 31, 2010

 

    

Location

   Square
Footage
     Owned/
Leased
 

Plates and Shapes Group:

        

Northeast Plates and Shapes

   Baltimore, Maryland      65,000         Leased   
   Seekonk, Massachusetts      115,000         Owned   
   Newark, New Jersey      81,000         Owned   
   Langhorne, Pennsylvania      235,000         Leased   
   Philadelphia, Pennsylvania      85,000         Owned   
   Philadelphia, Pennsylvania      109,000         Leased   
   York, Pennsylvania      109,000         Owned   

South Central Plates and Shapes

   Enid, Oklahoma      112,000         Owned   
   Tulsa, Oklahoma      533,000         Leased   
   Muskogee, Oklahoma(1)      229,000         Owned   
   Cedar Hill, Texas      150,000         Owned   

Mid-Atlantic Plates and Shapes

   Oakwood, Georgia      206,000         Owned   
   Greensboro, North Carolina      180,000         Owned   

Ohio Valley Plates and Shapes

   Canton, Ohio      110,000         Owned   
   Ambridge, Pennsylvania      200,000         Leased   

Southeast Plates and Shapes

   Mobile, Alabama      246,000         Owned   
   Jacksonville, Florida      60,000         Owned   
   Waggaman, Louisiana      371,000         Owned   
   Columbus, Mississippi      45,000         Owned   

Southwest Plates and Shapes

   Hayward, California      64,000         Leased   

 

25


Table of Contents
Index to Financial Statements
    

Location

   Square
Footage
     Owned/
Leased
 

Flat Rolled and Non-Ferrous Group:

        
   Anaheim, California      45,000         Leased   
   Madison, Illinois      100,000         Owned   
   Northbrook, Illinois      187,000         Owned   
   Jeffersonville, Indiana      90,000         Owned   
   Jeffersonville, Indiana (1) (2)      270,000         Owned   
   Jeffersonville, Indiana (2)      40,000         Leased   
   Wichita, Kansas      43,000         Leased   
   Walker, Michigan      50,000         Owned   
   Liberty, Missouri      117,000         Leased   
   Union, New Jersey      39,000         Leased   
   Randleman, North Carolina      154,000         Owned   
   Springfield, Ohio      105,000         Owned   
   Wooster, Ohio      140,000         Owned   
   Mesquite, Texas      55,000         Leased   
   Germantown, Wisconsin      102,000         Owned   
   Horicon, Wisconsin      120,000         Leased   
   Horicon, Wisconsin      40,000         Leased   
   Rockford, Illinois      72,000         Owned   
   Rockford, Illinois      41,000         Owned   
   Plymouth, Minnesota      19,000         Owned   

Building Products Group:

        

Sales Centers

   Birmingham, Alabama      12,000         Leased   
   Phoenix, Arizona      111,000         Leased   
   Hayward, California      24,000         Leased   
   Ontario, California      12,000         Leased   
   Leesburg, Florida      61,000         Leased   
   Pensacola, Florida      48,000         Leased   
   Kansas City, Missouri      16,000         Leased   
   Las Vegas, Nevada      133,000         Leased   
   Oklahoma City, Oklahoma      40,000         Leased   
   Irmo, South Carolina      38,000         Leased   
   Nashville, Tennessee      44,000         Leased   
   Houston, Texas      155,000         Leased   
   Longview, Texas      15,000         Leased   
   Mesquite, Texas      55,000         Leased   
   Weslaco, Texas      21,000         Leased   
   Salt Lake City, Utah      23,000         Leased   
   Kent, Washington      57,000         Leased   

Manufacturing Plants

   Brea, California      43,000         Leased   
   Buena Park, California      168,000         Leased   
   Groveland, Florida      247,000         Leased   
   Courtland, Ontario      32,000         Owned   

Administrative Locations:

        

Corporate Headquarters

   Fort Lauderdale, Florida      6,700         Leased   

Corporate Administration

   Houston, Texas      3,000         Leased   

i-Solutions

   Ft. Washington, Pennsylvania      4,000         Leased   

 

(1) These facilities are subject to liens with respect to specific debt obligations, including IRBs.
(2) These facilities comprise one operating location.

 

26


Table of Contents
Index to Financial Statements
Item 3. Legal Proceedings

From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. We believe the resolution of these matters and the incurrence of their related costs and expenses should not have a material adverse effect on our consolidated financial position, results of operations, liquidity or cash flows. While it is not feasible to predict the outcome of all pending suits and claims, the ultimate resolution of these matters as well as future lawsuits could have a material adverse effect on our business, financial condition, results of operations, cash flows or reputation.

 

Item 4. [Removed and Reserved]

 

27


Table of Contents
Index to Financial Statements

PART II

 

Item 5. Market for Registrant’s Common Equity and Related Stockholder Matters and Issuer Purchases of Equity Securities

As a result of the Merger, all of Metals USA Inc.’s issued and outstanding common stock is held indirectly by Metals USA Holdings through Flag Intermediate, its wholly owned subsidiary. Investment funds associated with Apollo own approximately 64% of the capital stock of Metals USA Holdings. As a result of Metals USA Holdings’ initial public offering, the aggregate percentage of Metals USA Holdings’ outstanding capital stock held by non-affiliates as of December 31, 2010, is approximately 31%. The remainder of the capital stock of Metals USA Holdings is held by members of management. Accordingly, the Company’s common stock is not traded on any stock exchange and has no established public trading market.

Dividends

As a result of the Merger, Metals USA assumed the obligations of Flag Acquisition, including the Metals USA Notes. All domestic operating subsidiaries of Metals USA have agreed, jointly and severally with Flag Intermediate (“Guarantors”), to unconditionally and irrevocably guarantee Metals USA’s obligations under the Metals USA Notes and Indenture Agreement dated November 30, 2005. Additionally, Flag Intermediate has unconditionally guaranteed as a primary obligor the due and punctual payment and performance of the obligations under the Indenture.

Metals USA Holdings is not a guarantor of the Metals USA Notes. There is a limitation on the amount of funds which can be transferred by the Guarantors to Metals USA Holdings in the form of dividends (see Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources” and Note 9 to the Consolidated Financial Statements).

No dividends were paid from Flag Intermediate to Metals USA Holdings during 2009 or 2010. In 2008, Flag Intermediate paid dividends to Metals USA Holdings aggregating $87.5 million. In 2007, Flag Intermediate paid dividends to Metals USA Holdings aggregating $18.1 million. In 2006, Flag Intermediate paid dividends to Metals USA Holdings aggregating $25.0 million.

 

28


Table of Contents
Index to Financial Statements
Item 6. Selected Financial Data

The following table sets forth our selected historical consolidated financial data as of the dates and for the periods indicated. The selected historical consolidated financial data for the year ended December 31, 2008, and as of December 31, 2009 and for the year ended December 31, 2009, and as of December 31, 2010, and for the year then ended December 31, 2010, have been derived from our audited consolidated financial statements and related notes included in this Form 10-K. The selected historical consolidated financial data for the year ended December 31, 2006, and as of December 31, 2006, and for the year ended December 31, 2007, and as of December 31, 2007, and as of December 31, 2008, presented in this table have been derived from the Company’s audited consolidated financial statements not included in this Form 10-K. The historical results set forth below do not necessarily indicate results expected for any future period, and should be read in conjunction with, and are qualified by reference to, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes thereto included elsewhere in this Form 10-K.

 

     Years Ended December 31,  
     2006     2007      2008     2009     2010  
     (in millions)  

Statements of Operations Data:

           

Net Sales

   $ 1,802.9      $ 1,845.3       $ 2,156.2      $ 1,098.7      $ 1,292.1   

Cost of sales (exclusive of operating and delivery, and depreciation and amortization included in operating expenses below)

     1,371.8        1,418.8         1,612.9        890.1        996.7   

Operating expenses

     312.1        313.0         336.3        230.7        235.1   
                                         

Operating income (loss)

     119.0        113.5         207.0        (22.1     60.3   

Interest expense

     54.1        57.6         54.5        44.9        37.2   

Gain on extinguishment of debt

     —          —           —          (13.6     —     

Other (income) expense, net

     (0.5     —           (0.2     0.3        —     
                                         

Income (loss) before income taxes

     65.4        55.9         152.7        (53.7     23.1   

Provision (benefit) for income taxes

     25.9        19.3         59.3        (18.0     8.2   
                                         

Net income (loss)

   $ 39.5      $ 36.6       $ 93.4      $ (35.7   $ 14.9   
                                         
     Years Ended December 31,  
     2006     2007      2008     2009     2010  
     (in millions)  

Balance Sheet Data:

           

Working Capital

   $ 572.9      $ 511.9       $ 635.3      $ 276.3      $ 368.2   

Total assets

     981.9        951.1         1,010.9        619.2        744.1   

Long-term debt, less current portion

     610.1        563.1         648.9        307.1        392.4   

Stockholder’s equity

     147.6        167.6         175.4        141.1        158.1   

 

29


Table of Contents
Index to Financial Statements
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This section contains statements that constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. See disclosure presented on the inside of the front cover of this report for cautionary information with respect to such forward-looking statements. Readers should refer to Item 1.A “Risk Factors” for risk factors that may affect future performance. The following discussion should be read in conjunction with Item 6. “Selected Financial Data” and Item 8. “Financial Statements and Supplementary Data.”

Overview

All references to the “Company” include Flag Intermediate, its wholly owned subsidiary Metals USA, and the wholly owned subsidiaries of Metals USA.

We believe that we are a leading provider of value-added processed carbon steel, stainless steel, aluminum and specialty metals, as well as manufactured metal components. For the year ended December 31, 2010, approximately 94% of our revenue was derived from our metals service center and processing activities, which are segmented into two groups: Flat Rolled and Non-Ferrous Group and Plates and Shapes Group. The remaining portion of our revenue was derived from our Building Products Group, which principally manufactures and sells aluminum products related to the residential remodeling industry. We purchase metal from primary producers that generally focus on large volume sales of unprocessed metals in standard configurations and sizes. In most cases, we perform the customized, value-added processing services required to meet the specifications provided by end-use customers. Our Plates and Shapes Group and Flat Rolled and Non-Ferrous Group customers are in the land and marine transportation, energy, aerospace, defense, electrical and appliance manufacturing, fabrication, furniture, commercial construction, and machinery and equipment industries. Our Building Products Group customers are primarily distributors and contractors engaged in the residential remodeling industry.

Industry Trends

Metals Service Centers

According to data from the Metal Service Center Institute, 34.5 million tons of steel sold by the metals service center industry in North America during 2009 was down approximately 35% from the 53.5 million tons sold in 2008, as the global financial crisis caused significant contraction in industrial production world-wide. The reduction in demand for metals was compounded by widespread inventory destocking throughout the supply chain as industry participants looked to preserve liquidity by managing down their investment in working capital. Beginning in the fourth quarter of 2008 and continuing through the first half of 2009, both prices and demand for metal products decreased significantly, reaching a low point late in the second quarter of 2009, after which both prices and demand began to stabilize.

Through the first half of 2010, spot prices for the key steel-making raw materials moved steadily higher as a result of the continuation of strong Chinese steel production and upticks in demand in the U.S. domestic market. At the same time, the global supply/demand balance remained sufficiently tight, driven primarily by the discipline of a consolidated set of producers and lower inventory risk assumed by the service center sector as a whole.

Amid continued signs of economic recovery, metals prices increased modestly during the first half of 2010. In the fourth quarter of 2010, the combination of lean inventory levels throughout the entire supply chain for both steel and scrap, along with the world’s largest iron ore producers running at record production rates and raising prices, provided upward momentum for steel prices. Service centers and end users purchased inventory to stay ahead of announced price increases and the expectation of a normal seasonal recovery, which extended mill lead times, prompting mills to push prices up more aggressively. Under the current scenario of favorable supply/demand trends in global markets, along with continued consolidation and discipline from producers, and tight

 

30


Table of Contents
Index to Financial Statements

raw material supply, current steel and metal prices could be sustainable for the near future. However, there can be no guarantees regarding the timing or extent of any future upward price trends or demand increases. Any number of political or general economic factors could cause prices to decline.

Building Products

The downturn in the housing and mortgage markets has caused significant contraction in the home improvement remodeling industry. Research indicates that remodeling activity is pro-cyclical with both new residential construction and the broader economy, but remodeling lags homebuilding by several quarters. The high cyclicality of remodeling activity appears to be driven by discretionary improvements, similar to the products sold by our building products business, which are quite volatile. Improvement spending is expected to be much more cyclical and more sensitive to upturns and downturns in the general economy, whereas maintenance and repair spending is expected to be fairly stable over time.

While the pace of the decline in homeowner remodeling projects appears to be moderating, increased remodeling activity does not seem likely to materialize until further signs of recovery emerge in the broader housing market. Although lower financing costs are reducing the cost of financing home improvement projects, weak home prices and decreased cost recovery for most types of remodeling projects continue to discourage owners from pursuing upper-end improvements.

Product demand for the Company’s Building Products Group may be influenced by numerous factors such as interest rates, general economic conditions, consumer confidence and other factors beyond our control. Declines in existing home sales and improvement remodeling expenditures due to such factors could continue to significantly reduce the segment’s performance.

Consolidated Results of Operations

The following financial information reflects our historical financial statements.

 

     Fiscal Years Ended December 31,  
     2010      %     2009     %     2008     %  
     (in millions, except percentages)  

Net sales

   $ 1,292.1         100.0   $ 1,098.7        100.0   $ 2,156.2        100.0

Cost of sales (exclusive of operating and delivery, and depreciation and amortization shown below)

     996.7         77.1     890.1        81.0     1,612.9        74.8

Operating and delivery

     131.9         10.2     126.7        11.5     186.1        8.6

Selling, general and administrative

     81.8         6.3     85.1        7.7     126.2        5.9

Depreciation and amortization

     17.8         1.4     18.9        1.7     21.3        1.0

Loss (gain) on sale of property and equipment

     0.3         0.0     —          —          (2.4     -0.1

Advisory agreement termination charge

     3.3         0.3     —          —          —          —     

Impairment of assets

     —           —          —          —          5.1        0.2
                                                 

Operating income (loss)

     60.3         4.7     (22.1     -2.0     207.0        9.6

Interest expense

     37.2         2.9     44.9        4.1     54.5        2.5

Gain on debt extinguishment

     —           —          (13.6     -1.2     —          —     

Other (income) expense, net

     —           —          0.3        0.0     (0.2     0.0
                                                 

Income (loss) before income taxes

   $ 23.1         1.8   $ (53.7     -4.9   $ 152.7        7.1
                                                 

Results of Operations—Year Ended December 31, 2010 Compared to 2009

Net sales. Net sales increased $193.4 million, or 17.6%, from $1,098.7 million for the year ended December 31, 2009 to $1,292.1 million for the year ended December 31, 2010. The increase was primarily

 

31


Table of Contents
Index to Financial Statements

attributable to a 16.0% increase in shipments, in addition to a 3.7% increase in average realized prices for our Flat Rolled and Non-Ferrous and Plates and Shapes Product Groups. Net sales decreased $10.2 million, or 10.9%, for our Building Products Group. Results for the year ended December 31, 2010, include the results from the J. Rubin acquisition from the date of the acquisition closing, which occurred on June 28, 2010. J. Rubin contributed $17.8 million of incremental sales for the year ended December 31, 2010. The increase in volumes for our metal service center businesses stemmed from better operating performance in an improving economy and stronger demand across most of our end-user markets, with the exception of weak non-residential construction and diminished levels of energy demand in the Gulf of Mexico. We believe that our focus on product mix enhancement during 2010 helped to mitigate the effects of uneven demand associated with specific regions and end-use industries.

Weak demand caused prices for many grades of steel to fall substantially during the first half of 2009, as steel producers in North America reduced prices and cut production to adjust to lower order levels. As a result, although our metal service center businesses have benefitted from a broader market recovery since mid-2009, the increase in net sales for 2010 versus 2009 was largely driven by volumes. Carbon steel prices have generally trended upward at a modest rate since late June 2009, although we experienced intermittent volatility in steel prices at various times during 2010, mainly during the third quarter. Prices increased in late 2010 in response to persistent higher raw material costs and typical seasonal demand strength leading into the next year. We believe current price levels are sustainable if producers maintain production commensurate with demand, however there can be no guarantee that such trends will continue.

Cost of sales. Cost of sales increased $106.6 million, or 12.0%, from $890.1 million for the year ended December 31, 2009, to $996.7 million for the year ended December 31, 2010. The increase was primarily attributable to a 16.0% increase in shipments for our Flat Rolled and Non-Ferrous and Plates and Shapes Product Groups, partially offset by a 1.9% decrease in average cost per ton. The J. Rubin acquisition added $12.1 million of incremental cost of sales for the year ended December 31, 2010. Cost of sales for our Building Products Group decreased $7.0 million, or 10.7%. The increase in volumes that contributed to higher cost of sales during 2010 was attributable to higher steel demand as the economy recovered from the global economic recession. Cost of sales as a percentage of net sales decreased from 81.0% for 2009 to 77.1% for 2010.

Operating and delivery. Operating and delivery expenses increased $5.2 million, or 4.1%, from $126.7 million for the year ended December 31, 2009 to $131.9 million for the year ended December 31, 2010. The increase was a result of higher variable costs associated with increased shipments, most notably higher freight costs of approximately $2.9 million. The increase was partially offset by cost reduction initiatives implemented over the last eighteen months, including reductions in square footage under lease, reduction in headcount and employee benefit modifications. As a percentage of net sales, operating and delivery expenses decreased from 11.5% for the year ended December 31, 2009 to 10.2% for the year ended December 31, 2010.

Selling, general and administrative. Selling, general and administrative expenses decreased $3.3 million, or 3.9%, from $85.1 million for year ended December 31, 2009 to $81.8 million for the year ended December 31, 2010. Lower costs associated with salaries and employee benefits, which amounted to approximately $6.2 million, achieved through personnel reductions and other cost reduction initiatives were the primary contributors to the period-over-period decrease. The decrease also includes a decrease of $0.5 million of expense related to potentially uncollectible customer accounts. As a percentage of net sales, selling, general and administrative expenses decreased from 7.7% for the year ended December 31, 2009 to 6.3% for the year ended December 31, 2010.

Depreciation and amortization. Depreciation and amortization expense decreased $1.1 million, or 5.8%, from $18.9 million for the year ended December 31, 2009 to $17.8 million for the year ended December 31, 2010. Over the past two years, the Company has reduced capital expenditures to align our investments in new equipment with lower business activity levels, and also to use available cash for debt reduction. As we reduced capital spending, our depreciation costs have decreased over time. The decrease was also due to lower

 

32


Table of Contents
Index to Financial Statements

amortization of customer list intangible assets (which is recognized on an accelerated basis and decreases over the life of the assets) recorded in connection with the acquisitions completed in May 2006, the acquisition of Lynch Metals in July 2007, and the Merger.

Operating income (loss). Operating income (loss) increased $82.4 million, or 372.9%, from an operating loss of $22.1 million for the year ended December 31, 2009 to operating income of $60.3 million for the year ended December 31, 2010. The increase was primarily a result of the increase in sales discussed above, as well as the decreases in selling, general and administrative expenses, and depreciation and amortization, as discussed above. In addition, the J. Rubin acquisition also contributed $1.1 million of incremental operating income for the period.

The increase in operating income during 2010 was partially offset by a one-time, $3.3 million charge to operating expense for the termination of our advisory agreement with Apollo in connection with Metals USA Holdings’ IPO. As a percentage of net sales, operating income (loss) increased from (2.0%) for the year ended December 31, 2009 to 4.7% for the year ended December 31, 2010.

Interest expense. Interest expense decreased $7.7 million, or 17.1%, from $44.9 million for the year ended December 31, 2009 to $37.2 million for the year ended December 31, 2010. The decrease was primarily a function of reduced borrowings on our ABL facility. The weighted average outstanding balance on our ABL facility decreased from $180.1 million for the year ended December 31, 2009 to $77.6 million for the year ended December 31, 2010.

Results of Operations—Year Ended December 31, 2009 Compared to 2008

Net sales. Net sales decreased $1,057.5 million, or 49.0%, from $2,156.2 million for the year ended December 31, 2008 to $1,098.7 million for the year ended December 31, 2009. The decrease was primarily attributable to a 36.1% decrease in volumes for our Flat Rolled and Non-Ferrous and Plates and Shapes Product Groups, in addition to a 22.5% decrease in average realized prices. The decrease in volumes for our metal service center businesses was due to an abrupt slowdown in demand in our end-use markets, as the global recession significantly reduced shipment levels to virtually all of the sectors that we serve. Weak demand caused prices for many grades of steel to fall substantially, as steel producers in North America reduced prices and cut production to adjust to the lower order levels. During the year ended December 31, 2009, steel product shipments from metals service centers in the U.S. declined approximately 36% in year-over-year comparisons, according to data from the Metals Service Center Institute. Net sales decreased $32.8 million for our Building Products Group, driven by continued weakness in residential remodeling and the overall housing markets.

Cost of sales. Cost of sales decreased $722.8 million, or 44.8%, from $1,612.9 million for the year ended December 31, 2008, to $890.1 million for the year ended December 31, 2009. The decrease was primarily attributable to a 36.1% decrease in volumes for our Flat Rolled and Non-Ferrous and Plates and Shapes Product Groups, in addition to a 15.1% decrease in the average cost per ton for our metals service center businesses. Cost of sales decreased $28.0 million for our Building Products Group. We recorded $53.4 million of write-downs during the year ended December 31, 2009, as compared to $6.8 million of write-downs during the year ended December 31, 2008, for inventory lower of cost or market adjustments in our metal service center businesses as a result of the price decreases and weak demand for steel products discussed above. Inventory tonnage on hand as of December 31, 2009 was 33.9% less than at December 31, 2008. Cost of sales as a percentage of net sales increased from 74.8% for the year ended December 31, 2008 to 81.0% for the year ended December 31, 2009. Steel prices generally increased modestly during the latter half of 2009.

Operating and delivery. Operating and delivery expenses decreased $59.4 million, or 31.9%, from $186.1 million for the year ended December 31, 2008 to $126.7 million for the year ended December 31, 2009. The

 

33


Table of Contents
Index to Financial Statements

decrease was a result of lower variable costs associated with decreased shipments. As a percentage of net sales, operating and delivery expenses increased from 8.6% for the year ended December 31, 2008 to 11.5% for the year ended December 31, 2009.

Selling, general and administrative. Selling, general and administrative expenses decreased $41.1 million, or 32.6%, from $126.2 million for the year ended December 31, 2008 to $85.1 million for the year ended December 31, 2009. Lower variable costs of $21.1 million associated with decreased incentive compensation, in addition to lower salaries of $8.6 million achieved in connection with cost reduction initiatives, were the primary contributors to the period-over-period decrease. As a percentage of net sales, selling, general and administrative expenses increased from 5.9% for the year ended December 31, 2008 to 7.7% for the year ended December 31, 2009.

Depreciation and amortization. Depreciation and amortization expense decreased $2.4 million, or 11.3%, from $21.3 million for the year ended December 31, 2008 to $18.9 million for the year ended December 31, 2009. The decrease was primarily due to lower amortization of customer list intangible assets (which is recognized on an accelerated basis and decreases over the life of the assets) recorded in connection with the acquisitions completed in May 2006, the acquisition of Lynch Metals in July 2007, and the Merger.

Operating income (loss). Operating income (loss) decreased $229.1 million, or 110.7%, from operating income of $207.0 million for the year ended December 31, 2008 to an operating loss of $22.1 million for the year ended December 31, 2009. The decrease was primarily a result of the decrease in net sales discussed above. As a percentage of net sales, operating income (loss) decreased from 9.6% for the year ended December 31, 2008 to (2.0%) for the year ended December 31, 2009.

Interest expense. Interest expense decreased $9.6 million, or 17.6%, from $54.5 million for the year ended December 31, 2008 to $44.9 million for the year ended December 31, 2009. The decrease was primarily a function of reduced borrowings on our ABL facility, as well as debt extinguishments on the Metals USA Notes. The weighted average outstanding balance on our ABL facility decreased from $384.1 million for the year ended December 31, 2008 to $180.1 million for the same period of 2009. We repurchased $48.7 million face value of the Metals USA Notes in the open market during the year ended December 31, 2009.

Gain on debt extinguishment. During the year ended December 31, 2009, we purchased $48.7 principal amount of the Metals USA Notes in the open market, resulting in a pretax gain of $13.6 (net of unamortized deferred financing costs) on debt extinguishment.

 

34


Table of Contents
Index to Financial Statements

Results of Operations by Segment

 

     Fiscal Years Ended December 31,  
     Net
Sales
    %     Operating
Costs and
Expenses
     %     Operating
Income
(Loss)
    %     Capital
Spending
     Tons
Shipped (1)
 
     (in millions, except percentages)  

2010:

                  

Plates and Shapes

   $ 538.0        41.6   $ 499.6         40.6   $ 38.4        63.7   $ 2.3         509   

Flat Rolled and Non-Ferrous

     680.5        52.7     635.2         51.6     45.3        75.1     0.7         558   

Building Products

     83.0        6.4     83.6         6.8     (0.6     -1.0     —           —     

Corporate and other

     (9.4     -0.7     13.4         1.1     (22.8     -37.8     1.0         (8
                                                                  

Total

   $ 1,292.1        100.0   $ 1,231.8         100.0   $ 60.3        100.0   $ 4.0         1,059   
                                                                  

2009:

                  

Plates and Shapes

   $ 523.0        47.6   $ 537.8         48.0   $ (14.8     67.0   $ 3.3         485   

Flat Rolled and Non-Ferrous

     490.7        44.7     474.2         42.3     16.5        -74.7     0.5         435   

Building Products

     93.2        8.5     97.1         8.7     (3.9     17.6     —           —     

Corporate and other

     (8.2     -0.7     11.7         1.0     (19.9     90.0     0.3         (7
                                                                  

Total

   $ 1,098.7        100.0   $ 1,120.8         100.0   $ (22.1     100.0   $ 4.1         913   
                                                                  

2008:

                  

Plates and Shapes

   $ 1,161.2        53.9   $ 990.5         50.8   $ 170.7        82.5   $ 8.6         837   

Flat Rolled and Non-Ferrous

     882.9        40.9     804.7         41.3     78.2        37.8     2.2         601   

Building Products

     126.0        5.8     135.1         6.9     (9.1     -4.4     0.7         —     

Corporate and other

     (13.9     -0.6     18.9         1.0     (32.8     -15.8     0.7         (10
                                                                  

Total

   $ 2,156.2        100.0   $ 1,949.2         100.0   $ 207.0        100.0   $ 12.2         1,428   
                                                                  

 

(1) Shipments are expressed in thousands of tons and are not an appropriate measure for the Building Products Group.

Segment Results—Year Ended December 31, 2010 Compared to 2009

Plates and Shapes. Net sales increased $15.0 million, or 2.9%, from $523.0 million for the year ended December 31, 2009 to $538.0 million for the year ended December 31, 2010. The increase was primarily attributable to a 4.9% increase in shipments, partially offset by a 2.0% decrease in average realized prices for the year ended December 31, 2010 compared to the year ended December 31, 2009. Product demand for the Plates and Shapes Group is more transactional in nature and is typically associated with industries and end markets that show strength during later stages of economic cycles. Although we experienced an increase in demand for structural steel during 2010, it was offset to a large extent by the dramatic decline in non-residential construction associated with the global recession that began in late 2008 and to a lesser extent by the U.S. deepwater drilling moratorium issued in May 2010. Intense competition negatively impacted pricing for structural steel throughout most of 2010. Non-residential construction typically lags behind the general economy by approximately eighteen months, and we expect to see some recovery in this market during 2011, although there can be no assurance that this will be the case.

Operating costs and expenses decreased $38.2 million, or 7.1%, from $537.8 million for the year ended December 31, 2009 to $499.6 million for the year ended December 31, 2010. The decrease was primarily attributable to a 12.2% decrease in the average cost per ton, partially offset by a 4.9% increase in shipments for the year ended December 31, 2010 compared to the year ended December 31, 2009. Operating costs and

 

35


Table of Contents
Index to Financial Statements

expenses as a percentage of net sales decreased from 102.8% for the year ended December 31, 2009 to 92.9% for the year ended December 31, 2010.

Operating income (loss) increased by $53.2 million, or 359.5%, from an operating loss of $14.8 million for the year ended December 31, 2009 to operating income of $38.4 million for the year ended December 31, 2010. The increase primarily resulted from lower operating costs and expenses, which were primarily the result of the decreases in average cost per ton discussed above in addition to cost reduction initiatives implemented over the last eighteen months. Operating income (loss) as a percentage of net sales increased from (2.8%) for the year ended December 31, 2009 to 7.1% for the year ended December 31, 2010.

Flat Rolled and Non-Ferrous. Net sales increased $189.8 million, or 38.7%, from $490.7 million for the year ended December 31, 2009 to $680.5 million for the year ended December 31, 2010. The J. Rubin acquisition contributed $17.8 million of incremental sales to this segment for the year ended December 31, 2010. The remaining increase was primarily attributable to a 25.3% increase in shipments, in addition to a 7.8% increase in average realized prices for the year ended December 31, 2010 compared to the year ended December 31, 2009. Sales of non-ferrous metals accounted for approximately 38% of the segment’s sales product mix for 2010, compared to approximately 40% for 2009. Our Flat Rolled and Non-Ferrous Group experienced good demand in the automotive, aerospace and lawn and garden equipment markets during 2010, and we expect these markets to continue to do well during 2011, although there can be no assurance that this will be the case.

Operating costs and expenses increased $161.0 million, or 34.0%, from $474.2 million for the year ended December 31, 2009 to $635.2 million for the year ended December 31, 2010. The J. Rubin acquisition contributed $16.7 million of incremental operating costs and expenses to the segment for 2010. The remaining increase was primarily attributable to a 25.3% increase in shipments, in addition to a 6.9% increase in average cost per ton. Operating costs and expenses as a percentage of net sales decreased from 96.6% for the year ended December 31, 2009 to 93.3% for the year ended December 31, 2010.

Operating income increased by $28.8 million, or 174.5%, from $16.5 million for the year ended December 31, 2009 to $45.3 million for the year ended December 31, 2010. The increase was primarily attributable to the increase in volumes, combined with the increase in average realized prices discussed above. Operating income as a percentage of net sales increased from 3.4% for the year ended December 31, 2009 to 6.7% for the year ended December 31, 2010.

Building Products. Net sales decreased $10.2 million, or 10.9%, from $93.2 million for the year ended December 31, 2009 to $83.0 million for the year ended December 31, 2010. The sales decrease was driven by lower consumer spending on residential remodeling due to the effects of the economic recession and the resulting depreciation of homes, as well as decreased access to affordable credit for homeowners and residential remodeling contractors. These factors have led to significant contraction in the home improvement remodeling industry.

Operating costs and expenses decreased $13.5 million, or 13.9%, from $97.1 million for the year ended December 31, 2009 to $83.6 million for the year ended December 31, 2010. The decrease was primarily due to lower sales volume and a decrease in variable costs related to lower market demand, and to a lesser extent due to cost reduction measures which were implemented to align the cost structure of the segment to current levels of lower market demand. Operating costs and expenses as a percentage of net sales decreased from 104.2% for the year ended December 31, 2009 to 100.7% for the year ended December 31, 2010.

Operating loss decreased from an operating loss of $3.9 million for the year ended December 31, 2009 to an operating loss of $0.6 million for the year ended December 31, 2010. The decrease was primarily attributable to lower operating costs, which decreased at a rate that was greater than the rate of decline in sales. Operating loss as a percentage of net sales was 0.7% for the year ended December 31, 2010 versus 4.2% for the year ended December 31, 2009.

 

36


Table of Contents
Index to Financial Statements

Corporate and other. This category reflects certain administrative costs and expenses management has not allocated to its industry segments. These costs include compensation for executive officers, insurance, professional fees for audit, tax and legal services and data processing expenses. The negative net sales amount represents the elimination of intercompany sales. The operating loss increased $2.9 million for the year ended December 31, 2010 as compared to the year ended December 31, 2009. During the second quarter of 2010, unamortized prepaid advisory fees of $3.3 million were charged to expense as a result of the termination of our advisory agreement with Apollo in connection with Metals USA Holdings’ IPO. This one-time charge was partially offset by a decrease in salaries and employee benefits of approximately $1.0 million, in addition to lower professional and consulting fees of approximately $0.4 million for the year ended December 31, 2010 versus 2009.

Segment Results—Year Ended December 31, 2009 Compared to 2008

Plates and Shapes. Net sales decreased $638.2 million, or 55.0%, from $1,161.2 million for the year ended December 31, 2008 to $523.0 million for the year ended December 31, 2009. The decrease was primarily attributable to a 42.1% decrease in shipments, in addition to a 22.3% decrease in average realized prices for the year ended December 31, 2009 compared to the year ended December 31, 2008.

Operating costs and expenses decreased $452.7 million, or 45.7%, from $990.5 million for the year ended December 31, 2008 to $537.8 million for the year ended December 31, 2009. The decrease was primarily attributable to a 42.1% decrease in shipments for the year ended December 31, 2009 compared to the year ended December 31, 2008. This segment recorded a $43.9 million write-down for inventory lower of cost or market adjustments during the year ended December 31, 2009.

Operating income (loss) decreased by $185.5 million, or 108.7%, from operating income of $170.7 million for the year ended December 31, 2008 to operating loss of $14.8 million for the year ended December 31, 2009. The decrease primarily resulted from lower net sales which were driven by a decrease in shipments, in addition to the charges incurred to write-down the segment’s inventories for the year ended December 31, 2009. Operating income (loss) as a percentage of net sales was (2.8%) for the year ended December 31, 2009 compared to 14.7% for the year ended December 31, 2008.

Flat Rolled and Non-Ferrous. Net sales decreased $392.2 million, or 44.4%, from $882.9 million for the year ended December 31, 2008 to $490.7 million for the year ended December 31, 2009. The decrease was primarily attributable to a 27.6% decrease in shipments, in addition to a 23.2% decrease in average realized prices, for the year ended December 31, 2009 compared to the year ended December 31, 2008. Sales of non-ferrous metals accounted for 40% of the segment’s sales product mix during 2009, compared to 41% during 2008.

Operating costs and expenses decreased $330.5 million, or 41.1%, from $804.7 million for the year ended December 31, 2008 to $474.2 million for the year ended December 31, 2009. The decrease was primarily attributable to a decrease in shipments of 27.6% in addition to a decrease in the average cost per ton of 21.6%. This segment recorded a $9.5 million write-down for inventory lower of cost or market adjustments during 2009. Operating costs and expenses as a percentage of net sales increased from 91.1% for the year ended December 31, 2008 to 96.6% for the year ended December 31, 2009.

Operating income decreased by $61.7 million, or 78.9%, from $78.2 million for the year ended December 31, 2008 to $16.5 million for the year ended December 31, 2009. The decrease was primarily attributable to the decrease in sales discussed above, which were primarily a function of lower shipments. Operating income as a percentage of net sales decreased from 8.9% for the year ended December 31, 2008 to 3.4% for the year ended December 31, 2009.

Building Products. Net sales decreased $32.8 million, or 26.0%, from $126.0 million for the year ended December 31, 2008 to $93.2 million for the year ended December 31, 2009. Softness in the residential remodeling market continued to produce period-over-period net sales decreases for our Building Products Group.

 

37


Table of Contents
Index to Financial Statements

Operating costs and expenses decreased $38.0 million, or 28.1%, from $135.1 million for the year ended December 31, 2008 to $97.1 million for the year ended December 31, 2009. The decrease was primarily due to lower sales volume and a decrease in variable costs related to lower market demand, in addition to certain initiatives the segment has taken in response to the downturn in the housing and remodeling markets. Management has continued to focus on cost reduction in order to mitigate the impact of lower operating levels resulting from the market downturn. Operating costs and expenses as a percentage of net sales decreased from 107.2% for the year ended December 31, 2008 to 104.2% for the year ended December 31, 2009.

Operating loss decreased by $5.2 million, or 57.1%, from $9.1 million for the year ended December 31, 2008 to $3.9 million for the year ended December 31, 2009. The decrease was primarily attributable to lower operating costs, which decreased at a rate greater than the decline in sales discussed above. Operating loss as a percentage of net sales decreased from 7.2% for the year ended December 31, 2008 to 4.2% for the year ended December 31, 2009.

Corporate and other. This category reflects certain administrative costs and expenses management has not allocated to its industry segments. These costs include compensation for executive officers, insurance, professional fees for audit, tax and legal services and data processing expenses. The negative net sales amount represents the elimination of intercompany sales. The operating loss decreased $12.9 million, or 39.3%, from $32.8 million for the year ended December 31, 2008 to $19.9 million for the year ended December 31, 2009. Lower variable costs of $4.5 million associated with decreased incentive compensation were the primary component of the decrease. Other cost reductions included $1.4 million of lower professional and consulting fees, and $1.0 million of lower costs attributable to employee benefit modifications.

Liquidity and Capital Resources

Our primary sources of short-term liquidity are borrowings under the ABL facility and our cash flow from operations. We believe these resources will be sufficient to meet our working capital and capital expenditure requirements for the next year. As of December 31, 2010, we had $106.0 million drawn on the ABL facility, our borrowing availability was $161.5 million, and we had cash of $15.2 million. Our borrowing availability fluctuates daily with changes in eligible accounts receivables and inventory, less outstanding borrowings and letters of credit. See “—Financing Activities” below. At February 28, 2011, we had $125.5 million drawn on the ABL facility, our borrowing availability was $185.8 million and we had cash of approximately $15.5 million.

We generally meet long-term liquidity requirements, the repayment of debt and investment funding needs, through additional borrowings under the ABL facility and the issuance of debt securities. At December 31, 2010, our long-term debt consisted of $106.0 million of outstanding borrowings on the ABL facility, $226.3 million principal amount of the Metals USA Notes, $47.0 million principal amount of intercompany loans payable to Metals USA Holdings, IRBs with $12.6 million principal amount outstanding and $0.5 million in vendor financing and purchase money notes. We believe that cash flow from operations, supplemented by cash available under the ABL facility, will be sufficient to enable us to meet our debt service and operational obligations as they come due for at least the next twelve months.

With respect to long-term liquidity, we believe that we will be able to meet our working capital, capital expenditures and debt service obligations. Our ability to meet long-term liquidity requirements is subject to obtaining additional debt and/or equity financing. Decisions by lenders and investors to enter into such transactions with us will depend upon a number of factors, such as our historical and projected financial performance, compliance with the terms of our current credit agreements, industry and market trends, the availability of capital, and the relative attractiveness of alternative lending or investment opportunities.

 

38


Table of Contents
Index to Financial Statements

Operating and Investing Activities

Although we do not produce any metal, our financial performance is affected by changes in metal prices. When metal prices rise, the prices at which we are able to sell our products generally increase over their historical costs; accordingly, our working capital (which consists primarily of accounts receivable and inventory) tends to increase in a rising price environment. Conversely, when metal prices fall, our working capital tends to decrease. Our working capital (current assets less current liabilities) increased from $276.3 million at December 31, 2009 to $368.2 million at December 31, 2010.

Changes in metal prices also affect our liquidity because of the time difference between our payment for our raw materials and our collection of cash from our customers. We sell our products and typically collect our accounts receivable within 45 days after the sale; however, we tend to pay for replacement materials (which are more expensive when metal prices are rising) over a much shorter period, primarily to benefit from early-payment discounts that are substantially higher than our cost of incremental debt. As a result, when metal prices are rising, we tend to draw more on the ABL facility to cover the cash flow cycle from material purchase to cash collection. When metal prices fall, we can replace our inventory at lower cost and, thus, generally the ABL facility utilization is reduced. We believe our cash flow from operations, supplemented with the cash available under the ABL facility, will provide sufficient liquidity to meet the challenges and obligations we face during the current metal price environment. Additionally, we intend to look for value-added business opportunities that we can acquire at reasonable prices. We intend to use cash flows from operations and excess cash available under the ABL facility to fund future investments.

Cash Flows

The following discussion of the principal sources and uses of cash should be read in conjunction with our Consolidated Statements of Cash Flows which are set forth under Item 8—“Financial Statements and Supplementary Data.”

Year Ended December 31, 2010

During the year ended December 31, 2010, net cash used in operating activities was $30.2 million. This amount was primarily attributable to increases in accounts receivable and inventories. Changes in working capital during 2010 reflect improving business conditions as commodity prices and demand continued to increase. We increased inventory tonnage on hand commensurate with increased levels of shipments to our customers, while prices increased moderately throughout the year, despite some intermittent volatility. Our accounts receivable increased due to higher sales levels in 2010.

Net cash used in investing activities was $31.3 million for the year ended December 31, 2010, and consisted primarily of $28.0 million for the acquisition of J. Rubin and ORMS in June and December, respectively. Capital expenditures amounted to $4.0 million for the year ended December 31, 2010. There were no material individual capital investment projects specific to any facilities during 2010.

Net cash provided by financing activities was $71.2 million for the year ended December 31, 2010, and consisted primarily of borrowings on the intercompany loan facility of $47.0 million in addition to net borrowings under the ABL facility of $31.0 million.

Year Ended December 31, 2009

During the year ended December 31, 2009, net cash provided by operating activities was $248.9 million. This amount was primarily attributable to decreases in accounts receivable and inventories. Changes in working capital during 2009 reflect the change in the business environment that began during the fourth quarter of 2008, when we began reducing inventory purchases as a result of weaker demand and declining prices. Our accounts receivable decreased due to lower sales levels in 2009.

 

39


Table of Contents
Index to Financial Statements

Net cash used in investing activities was $7.8 million for the year ended December 31, 2009, and consisted of proceeds from sales of assets of $0.5 million offset by $4.1 million of capital expenditures and $4.2 million for the acquisition of VR Laser. For the year ended December 31, 2009, the most significant internal capital projects were expansion of our plate processing machinery and equipment at our Tulsa, Oklahoma and York, Pennsylvania Plates and Shapes facilities.

Net cash used in financing activities was $328.6 million for the year ended December 31, 2009, and consisted primarily of net repayments on the ABL facility of $293.0 million, in addition to repayments of other long-term debt of $35.6 million.

Year Ended December 31, 2008

During the year ended December 31, 2008, net cash provided by operating activities was $92.0 million. Through the first three quarters of 2008, we generated significant profits as global steel prices rose to record highs. Our increased profitability was the primary contributor to our cash flow from operations for 2008. During the fourth quarter of 2008, we began to decrease our inventories in response to slackening demand and decreasing prices. Our fourth quarter 2008 reduction in working capital also contributed to cash flow from operations for the year.

Net cash used in investing activities was $7.7 million for the year ended December 31, 2008, and consisted of proceeds from sales of assets of $9.5 million offset by $12.2 million of purchases of assets and $5.0 million of contingent consideration paid during 2008 in connection with the May 2006 acquisition of Port City. For the year ended December 31, 2008, the most significant internal capital project was the expansion of our New Orleans Plates and Shapes facility.

Net cash used in financing activities was $4.9 million for the year ended December 31, 2008, and consisted primarily of net borrowings on the ABL facility of $87.5 million, offset by dividends paid to Metals USA Holdings of $87.5 million, $2.4 million of repayments of long-term debt and $2.5 million of deferred financing costs.

Covenant Compliance

Adjusted EBITDA

Adjusted EBITDA (as defined by the loan and security agreement governing the ABL facility and the Indenture governing the Metals USA Notes) is defined as EBITDA further adjusted to exclude certain non-cash and non-recurring items. Adjusted EBITDA is not a defined term under GAAP and should not be used as an alternative to net income as an indicator of operating performance or to cash flow as a measure of liquidity.

Fixed Charge Coverage Ratio

Under the ABL facility, the FCCR is determined on a rolling four-quarter period, often referred to as a last-twelve month period, by dividing (1) the sum of Adjusted EBITDA of Metals USA minus income taxes paid in cash minus non-financed capital expenditures by (2) the sum of certain distributions paid in cash, cash interest expense and scheduled principal reductions on debt paid by Metals USA. Should borrowing availability under the ABL facility fall below Minimum Availability, we must maintain a FCCR of at least 1.0 to 1.0, measured on a trailing four-quarter basis. As of December 31, 2010, our borrowing availability under the ABL facility was $161.5 million. In addition, the FCCR also is an important measure of our liquidity and affects our ability to take certain actions, including paying dividends to stockholders and making acquisitions.

Although the Indenture governing the Metals USA Notes also contains covenants that restrict our ability to incur indebtedness and pay dividends based on our FCCR, the definition and application of the FCCR contained

 

40


Table of Contents
Index to Financial Statements

in the Indenture differs from the definition and application of the FCCR in the ABL facility in that the numerator of the FCCR as defined in the Indenture does not include cash income taxes or non-financed capital expenditures and the denominator of the FCCR as defined in the Indenture does not include the sum of certain distributions paid in cash and scheduled principal reductions on debt, and separate FCCRs are required under certain circumstances. See “—Financing Activities” below.

Because access to debt capital is currently and in the future will continue to be important to us, we believe that the inclusion of supplementary adjustments to EBITDA applied in presenting Adjusted EBITDA are appropriate to provide additional information to investors to demonstrate compliance with the covenants in our debt agreements. Failure to comply with the FCCR covenant of the ABL facility can result in limiting our long-term growth prospects by hindering our ability to incur future indebtedness or grow through acquisitions. As of December 31, 2010, our FCCR was 2.44. As of December 31, 2010, we had $161.5 million of additional borrowing capacity under the ABL facility.

The Indenture governing the Metals USA Notes contains covenants that restrict our ability to take certain actions, such as incurring additional debt and making certain acquisitions, if we are unable to meet defined Adjusted EBITDA to fixed charge coverage ratios (as defined). The covenants in the Indenture require us to have an Adjusted EBITDA to fixed charge coverage ratio (measured on a trailing four-quarter basis and calculated differently from the fixed charge coverage ratio as defined by the ABL facility) of 2.0 to 1.0 to incur “ratio” indebtedness. Based on the calculations for the trailing four quarters, we are able to satisfy these covenants and incur additional indebtedness under these ratios, including for acquisition purposes, under our Indenture.

Our inability to satisfy the terms of the negative covenants in our debt agreements do not, by themselves, constitute covenant violations or events of default. Rather, they are event-related restrictions that may limit or prohibit the Company from taking certain corporate actions. As of December 31, 2010, we were unable to pay dividends as a result of our inability to satisfy the terms of certain negative covenants in our debt agreements.

Limitations of Adjusted EBITDA

There are material limitations associated with making the adjustments to our earnings to calculate Adjusted EBITDA and using such a non-GAAP financial measure as compared to the most directly comparable GAAP financial measures. For instance, Adjusted EBITDA does not include:

 

   

interest expense, and, because we have borrowed money in order to finance our operations, interest expense is a necessary element of our costs and ability to generate revenue;

 

   

income tax expense, and because the payment of taxes is part of our operations, income tax expense is a necessary element of our costs and ability to operate; and

 

   

depreciation and amortization expense, and, because we use capital assets, depreciation and amortization expense is a necessary element of our costs and ability to generate revenue.

In addition, fixed charges should not be considered an alternative to interest expense.

 

41


Table of Contents
Index to Financial Statements

Below is a reconciliation of net income (loss) to EBITDA, Adjusted EBITDA and net cash (used in) provided by operating activities:

 

     Years Ended December 31,  
     2010     2009     2008  
     (in millions, except ratios)  

Net income (loss)

   $ 14.9      $ (35.7   $ 93.4   

Depreciation and amortization(1)

     19.8        21.2        23.6   

Interest expense

     37.2        44.9        54.5   

Gain on extinguishment of debt

     —          (13.6     —     

Provision (benefit) for income taxes

     8.2        (18.0     59.3   

Other (income) expense

     —          0.3        (0.2
                        

EBITDA

     80.1        (0.9     230.6   

Covenant defined adjustments:

      

Stock options and grant expense(2)

     1.2        0.4        1.1   

Facilities closure(3)

     —          2.1        4.0   

Advisory agreement fees and other costs(4)

     3.8        1.2        1.9   

Impairment of assets(5)

     —          —          5.1   
                        

Adjusted EBITDA

     85.1        2.8        242.7   

Loss (gain) on sale of property and equipment

     0.3        —          (2.4

Provision for bad debts

     2.4        2.9        3.1   

Amortization of debt issuance costs

     4.0        3.5        3.2   

Deferred income taxes

     1.6        4.2        (3.1

Excess tax benefit from stock-based compensation

     (0.1     —          —     

Advisory agreement termination charge

     3.3        —          —     

Interest expense

     (37.2     (44.9     (54.5

Provision for income taxes

     (8.2     18.0        (59.3

Other income (expense)

     —          (0.3     0.2   

Facilities closure

     —          (2.1     (4.0

Advisory agreement fees and other costs

     (3.8     (1.2     (1.9

Changes in assets and liabilities

     (77.6     266.0        (32.0
                        

Net cash (used in) provided by operating activities

   $ (30.2   $ 248.9      $ 92.0   
                        

Net cash used in investing activities

   $ (31.3   $ (7.8   $ (7.7
                        

Net cash provided by (used in) financing activities

   $ 71.2      $ (328.6   $ (4.9
                        

Fixed charge coverage ratio numerator(6)

   $ 88.5      $ 15.8      $ 197.9   

Fixed charge coverage ratio denominator(6)

   $ 36.3      $ 37.6      $ 68.1   

FCCR(6)

     2.44        0.42        2.91   
                        

 

(1) Includes depreciation for Building Products that is included in cost of sales.
(2) Non-cash stock option and stock grant expense.
(3) This amount represents charges for the closure of nine facilities in our Building Products Group and one facility in our Plates and Shapes Group during 2009, and six facilities in our Building Products Group during 2008.
(4) Primarily represents expenses related to the advisory agreement we had with Apollo.
(5) This amount represents non-cash impairment charges related to goodwill and customer list intangible assets associated with our Building Products Group.
(6) These amounts represent the Fixed Charge Coverage Ratio (“FCCR”) numerator, the FCCR denominator, and the FCCR, each as defined by the ABL facility.

 

42


Table of Contents
Index to Financial Statements

Financing Activities

The ABL Facility

On December 17, 2010, Flag Intermediate, Metals USA, and certain subsidiaries of Metals USA entered into an amended and restated loan and security agreement (the “ABL Credit Agreement”) with the lenders party thereto and Bank of America, N.A., as administrative agent and collateral agent.

The ABL Credit Agreement provides for a new $500 million (which may be increased up to $750 million at the option of Metals USA, including up to $35.0 million under a first-in, last-out (“FILO”) tranche)), 5-year, senior secured asset-based credit facility (the “ABL facility”) that amended and restated Metals USA’s then-existing $625 million senior secured asset-based credit facility that was scheduled to mature on November 30, 2011.

On March 9, 2011, we activated $25.0 million of the FILO tranche, and thereafter aggregate commitments under the ABL facility. The ABL facility permits us to borrow on a revolving basis through the earlier of November 30, 2015 and 60 days prior to the scheduled maturity of the Metals USA Notes, unless the Metals USA Notes are refinanced to a date more than 5 years and 60 days after the closing date of the ABL facility and/or repaid prior to such date. Substantially all of our subsidiaries are borrowers under the ABL facility.

Borrowing Base. The maximum availability under the ABL facility is based on eligible receivables and eligible inventory, subject to certain reserves. Our borrowing availability fluctuates daily with changes in eligible receivables and inventory, less outstanding borrowings and letters of credit. The borrowing base is equal to:

 

   

85% of the net amount of eligible accounts receivable, plus

 

   

the lesser of (x) 80% of the lesser of the original cost or market value of eligible inventory and (y) 90% of the net orderly liquidation value of eligible inventory, plus

 

   

an incremental amount of the lesser of (x) the maximum commitments under the FILO tranche and (y) the sum of (i) 5% of the net amount of eligible accounts receivable and (ii) 5% of the net orderly liquidation value of eligible inventory during the effectiveness of any FILO tranche, less

 

   

reserves.

The ABL facility provides sub-limits for up to $25.0 million of swingline loans and up to $100.0 million for the issuance of letters of credit. Both the face amount of any outstanding letters of credit and any swingline loans will reduce borrowing availability under the ABL facility on a dollar-for-dollar basis.

As of December 31, 2010, we had $290.5 million of eligible collateral, $106.0 million in outstanding advances, $23.0 million in open letters of credit and $161.5 million of additional borrowing capacity. As of December 31, 2010, we had $15.2 million of cash.

At February 28, 2011, we had $337.2 million of eligible collateral, $125.5 million in outstanding advances, $25.9 million in open letters of credit and $185.8 million of additional borrowing capacity. As of February 28, 2011, we had approximately $15.5 million of cash.

Guarantees and Security. Substantially all of our subsidiaries are defined as “borrowers” under the ABL Credit Agreement. The obligations under the ABL facility are guaranteed by Flag Intermediate and certain of our domestic subsidiaries and are secured by a first-priority lien and security interest in, among other things, accounts receivable, inventory and deposit accounts of Flag Intermediate, Metals USA and the subsidiaries of Metals USA party to the ABL Credit Agreement and a second-priority lien and security interest in, among other things, substantially all other tangible and intangible personal and real property owned by such companies, subject to certain exceptions.

 

43


Table of Contents
Index to Financial Statements

Interest Rate and Fees. At Metals USA’s option, interest accrues on the loans made under the ABL facility at either LIBOR plus a specified margin (currently set at 2.50% (3.875% for the FILO tranche)), or the base rate (which is based off of the federal funds rate plus 0.50%, Bank of America’s prime rate or LIBOR plus 1.00%), plus a specified margin (currently set at 1.50% (2.875% for the FILO tranche)). The marginal rates vary based on our average monthly excess availability (as defined in the ABL Credit Agreement). The applicable base rate and the effective LIBOR rate for the loans made under the ABL facility were 3.25% and 0.303%, respectively, as of December 31, 2010.

A commitment fee is payable on any unused commitment equal to 0.375% per annum to the lenders under the ABL facility if utilization under the facility exceeds 40.0% of the total commitments under the facility and a commitment fee equal to 0.5% per annum if utilization under the facility is less than or equal to 40.0% of the total commitments under the facility. Customary letter of credit fees are also payable, as necessary.

Certain Conditions Precedent and Covenants. As a condition precedent to any borrowing or issuance of a letter of credit, a material adverse effect shall not have occurred or exist. The ABL facility contains customary representations, warranties and covenants, including limitations on our ability to incur or guarantee additional debt, subject to certain exceptions, pay dividends, or make redemptions and repurchases, with respect to capital stock, repay debt, create or incur certain liens, make certain loans or investments, make acquisitions or investments, engage in mergers, acquisitions, asset sales, and engage in certain transactions with affiliates. The ABL facility requires a lock-box arrangement for collection of accounts receivable and proceeds from sales of inventory. Metals USA may make withdrawals from the lock-box unless an event of default exists or borrowing availability is less than the greater of (i) $50.0 million and (ii) 12.5% of the lesser of (A) the borrowing base (not to exceed $62.5 million) and (B) the aggregate commitment. We do not have to maintain a minimum FCCR as long as our borrowing availability is greater than or equal to the greater of (i) $45.0 million and (ii) 10% of the lesser of the borrowing base and the aggregate commitment (the “Minimum Availability”). We must maintain an FCCR of at least 1.0 to 1.0 if borrowing availability falls below the Minimum Availability. For purposes of determining covenant compliance, the FCCR is determined by dividing (i) the sum of Adjusted EBITDA (as defined in the ABL Credit Agreement) minus income taxes paid in cash (excluding certain specified deferred taxes) minus non-financed capital expenditures by (ii) the sum of certain distributions paid in cash, cash interest expense and scheduled principal reductions on debt, and is calculated based on such amounts for the most recent period of four consecutive fiscal quarters for which financial statements are available. FCCR and Adjusted EBITDA are each calculated on a pro forma basis. As of December 31, 2010, our FCCR was 2.44.

Certain Events of Default and Remedies. The ABL facility contains events of default with respect to: default in payment of principal when due, default in the payment of interest, fees or other amounts after a specified grace period, material breach of the representations or warranties, default in the performance of covenants, a default that causes or permits acceleration under any indebtedness with a principal amount in excess of a specified amount, certain bankruptcy events, certain ERISA violations, invalidity of certain security agreements or guarantees, material judgments, or a change of control. In the event of default, the ABL Credit Agreement may permit a majority of the lenders to: (i) restrict the amount of or refuse to make revolving loans; (ii) cause customer receipts to be applied against borrowings under the ABL facility which would cause Metals USA to suffer a rapid loss of liquidity and restrict the ability to operate on a day-to-day basis; (iii) restrict or refuse to provide letters of credit; or ultimately: (iv) terminate the commitments and the agreement; or (v) declare any or all obligations to be immediately due and payable if such default is not cured in the specified period required. Any payment default or acceleration under the ABL facility would also result in a default under the Metals USA Notes that would provide the holders of the Metals USA Notes with the right to demand immediate repayment.

Interest Rate Swaps. In February 2008, $250.0 million notional amount of outstanding borrowings under the ABL facility were swapped from a floating LIBOR-based rate to a fixed rate. The swaps entitle us to receive quarterly payments of interest at a floating rate indexed to the three-month LIBOR and pay a fixed rate that ranges from 2.686% to 2.997%, converting a portion of the outstanding borrowings on our ABL facility from a floating rate obligation to a fixed rate obligation. Pretax realized gains and losses from derivatives which were

 

44


Table of Contents
Index to Financial Statements

recognized in earnings during the year ended December 31, 2010 amounted to $2.6 million of additional interest expense, consisting of $5.6 million of settlements, offset by $3.0 million of changes in the fair value of derivatives. The fair value of the Company’s ABL facility interest rate swaps was $1.8 million at December 31, 2010, the entire amount of which was classified as accrued liabilities in the consolidated balance sheet.

The Metals USA Notes

On the closing date of the Merger, we received approximately $268.0 million of net cash proceeds from the sale of $275.0 million in aggregate principal amount of the Metals USA Notes, after deducting expenses of the offering. Interest on the Metals USA Notes accrues at the rate of 11 1/8% per annum and is payable semiannually in arrears on June 1 and December 1 and commenced on June 1, 2006. The Metals USA Notes will mature on December 1, 2015. We may redeem some or all of the Metals USA Notes at any time on or after December 1, 2010, at a predetermined redemption price plus accrued and unpaid interest and additional interest, if any, to the applicable redemption date. If we experience a change of control and we do not redeem the Metals USA Notes, we will be required to make an offer to repurchase the Metals USA Notes at a price equal to 101% of the principal amount, plus accrued and unpaid interest and additional interest, if any, to the date of repurchase.

Under the Indenture governing the Metals USA Notes, we are required to pay interest on overdue principal at 1% per annum in excess of the above rate and are required to pay interest on overdue installments of interest at such higher rate to the extent lawful. The Indenture governing the Metals USA Notes contains the covenants described under “—Covenant Compliance” above.

The Metals USA Notes Indenture contains certain customary events of default, including (subject, in some cases, to customary cure period thresholds) defaults based on (1) the failure to make payments under the Metals USA Indenture when due, (2) breach of covenants, (3) cross-defaults to other material indebtedness, (4) bankruptcy events and (5) material judgments. We were in compliance in all material respects with all covenants as of December 31, 2010.

Metals USA Holdings’ Senior Floating Rate Toggle Notes due 2012

On July 10, 2007, Metals USA Holdings issued $300.0 million initial aggregate principal amount of the Senior Floating Rate Toggle Notes due 2012 (the “2007 Notes”).

On April 14, 2010, Metals USA Holdings called for redemption of all of its remaining outstanding 2007 Notes, representing an aggregate principal amount of approximately $169.6 as of the date thereof. The redemption price of the 2007 Notes was 100% of the outstanding aggregate principal amount, plus accrued and unpaid interest thereon to, but not including the Redemption Date. All of the 2007 Notes were redeemed on the Redemption Date. Metals USA Holdings did not incur any early termination penalties in connection with the redemption of the 2007 Notes. Metals USA Holdings used a portion of the net proceeds from its IPO to finance the redemption. The aggregate cash payment for the redemption, including accrued and unpaid interest, was approximately $170.9 million.

Industrial Revenue Bonds

Metals USA is a conduit bond obligor on IRBs issued by the municipalities of Muskogee, Oklahoma and Jeffersonville, Indiana. As of December 31, 2010, our total indebtedness under the IRBs was $13.4 million. The IRBs are secured by certain real estate, leasehold improvements and equipment acquired with proceeds from the IRBs. The Muskogee, Oklahoma IRB is due in one lump sum of $5.7 million on May 1, 2016. The Jeffersonville IRBs had principal amounts outstanding of $3.5 million and $4.2 million as of December 31, 2010, and are being redeemed in varying amounts annually through August 2021 and December 2027, respectively. The interest rates assessed on the IRBs vary from month to month. As of December 31, 2010, the weighted average interest rate on the IRBs was 0.65%. The IRBs place various restrictions on certain of our subsidiaries, including but not limited

 

45


Table of Contents
Index to Financial Statements

to maintenance of required insurance coverage, maintenance of certain financial ratios, limits on capital expenditures and maintenance of tangible net worth and are supported by letters of credit. We were in compliance with all covenants as of December 31, 2010.

Interest Rate Swaps. In November 2004 and December 2007, ORMS, which we acquired on December 31, 2010, entered into two separate interest rate swap agreements in connection with the Jeffersonville, Indiana IRBs discussed above. The notional amounts under these swaps correspond to the principal amounts of the IRBs, which were a combined $7.7 million as of December 31, 2010, and are reduced on an annual basis as the IRBs are redeemed. Under the swaps, the notional amounts under the Jeffersonville, Indiana IRBs were swapped from a floating rate based on a rate established by the Securities Industry and Financial Market Association (“SIFMA”) to fixed rates of 4.00% and 3.75%, converting the outstanding borrowings on the Jeffersonville, Indiana IRBs from floating rate obligations to fixed rate obligations. Since the ORMS acquisition closed on December 31, 2010, there was no impact to the Company’s earnings related to these swaps for the year ended December 31, 2010. Future pretax realized gains and losses from these derivatives will be recognized in earnings as an addition or reduction to interest expense, consisting of cash settlements and changes in the fair value of derivatives. The fair value of the ORMS interest rate swaps was $0.5 million at December 31, 2010, $0.1 million of which was classified as accrued liabilities and the remaining $0.4 million of which was classified as other non-current liabilities in the consolidated balance sheet.

Intercompany Loan Agreement

Metals USA Holdings has made advances to Metals USA through an intercompany loan agreement, as amended, (the “Loan Agreement”), which totaled $47.0 million as of December 31, 2010. The advances have been primarily to accommodate working capital expansion and the Rubin acquisition discussed in Note 2. Borrowings under the Loan Agreement bear interest at a rate of LIBOR plus 6.50% per annum. The aggregate amount of Metals USA Holdings’ commitment under the Loan Agreement is $50.0 million, with a maturity date of June 15, 2012, unless otherwise extended or terminated earlier by the parties thereto. For the year ended December 31, 2010, Metals USA recognized $1.8 million of interest expense related to the Loan Agreement.

Restricted Payments

Both the ABL facility and the Indenture governing the Metals USA Notes contain restrictions as to the payment of dividends. Under the ABL Credit Agreement, general distributions are unlimited if the FCCR is at least 1.1:1.0 and availability (including a 30 day lookback) exceeds the greater of (i) $50.0 million and (ii) 15% of the lesser of the borrowing base (not to exceed $75.0 million) and the aggregate commitments. As of December 31, 2010, our FCCR was 2.44, and our borrowing availability was $161.5 million.

As of December 31, 2010, no amount was available for general distribution under the restricted payment covenant contained in the Indenture governing the Metals USA Notes. As of December 31, 2010, Flag Intermediate and its wholly owned subsidiary, Metals USA, had $157.3 million of total stockholder’s equity.

We believe that cash flow from operations, supplemented by cash available under the ABL facility, will be sufficient to enable us to meet our debt service and operational obligations as they come due for at least the next twelve months.

Commitments and Contingencies

From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. We believe the resolution of these matters and the incurrence of their related costs and expenses should not have a material adverse effect on our consolidated financial position, results of operations, liquidity or cash flows.

 

46


Table of Contents
Index to Financial Statements

Off-Balance Sheet Arrangements

We were not engaged in off-balance sheet arrangements through any unconsolidated, limited purpose entities and no material guarantees of debt or other commitments to third parties existed at December 31, 2010.

Letters of credit outstanding at December 31, 2010 consist of a letters of credit in the amount of $11.3 million in conjunction with the IRBs and other letters of credit aggregating $11.7 million (total letters of credit of $23.0 million at December 31, 2010). Other letters of credit consist primarily of collateral support for our property and casualty insurance program. All letters of credit reduce the amount available to borrow under the ABL facility.

Contractual Obligations

We enter into operating leases for many of our facility, vehicle and equipment needs. These leases allow us to conserve cash by paying a monthly lease rental fee for the use of, rather than purchasing facilities, vehicles and equipment. At the end of the lease, we have no further obligation to the lessor. We have varying amounts of open purchase orders that are subject to renegotiation/cancellation by either party as to quantity or price. Generally, the amounts outstanding relate to delivery periods of up to 12 weeks from the date of the purchase order.

Our future contractual obligations as of December 31, 2010 include the following:

 

            For the Fiscal Years Ended December 31,  
     Total      2011      2012      2013      2014      2015      Beyond  
                          (in millions)                

ABL facility(1)

   $ 106.0       $ —         $ —         $ —         $ —         $ 106.0       $ —     

Purchase Orders

     188.2         188.2         —           —           —           —           —     

11 1/8 Senior Secured Notes Due 2015 (Metals USA Notes)

     352.3         25.2         25.2         25.2         25.2         251.5         —     

IRBs(2)

     13.4         0.8         0.3         0.4         0.4         0.4         11.1   

Due to Parent

     51.6         3.1         48.5         —           —           —           —     

Other obligations(3)

     7.5         0.9         0.8         0.8         0.7         0.6         3.7   

Operating lease obligations

     42.1         13.8         8.7         6.0         4.4         4.0         5.2   
                                                              

Total

   $ 761.1       $ 232.0       $ 83.5       $ 32.4       $ 30.7       $ 362.5       $ 20.0   
                                                              

 

(1) The amounts stated do not include interest costs. The ABL facility bears interest based upon a margin over reference rates established within a specific pricing grid. The marginal rates will vary based on availability. The applicable base rate and the effective LIBOR rate were 3.25% and 0.303%, respectively, on December 31, 2010.
(2) The amounts do not include interest costs. The interest rates assessed on the IRBs vary from month to month based on an index of mutual bonds. The weighted average IRB rate was 0.65% as of December 31, 2010.
(3) Consists of (i) junior indebtedness of approximately $0.1 million, (ii) capital lease of approximately $0.6 million, and (iii) a multiemployer pension fund withdrawal liability of approximately $6.7 million. Excludes payments for unrecognized tax benefits. Based on the contingent and uncertain nature of our liability for unrecognized tax benefits, we are unable to make an estimate of the period of potential settlement, if any, with respective taxing authorities.

Critical Accounting Policies and Estimates

The discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with GAAP. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of

 

47


Table of Contents
Index to Financial Statements

assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities. Estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. The result of this process forms the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. We review our estimates and judgments on a regular, ongoing basis. Actual results may differ from these estimates due to changed circumstances and conditions.

The following accounting policies and estimates are considered critical in light of the potentially material impact that the estimates, judgments and uncertainties affecting the application of these policies might have on our reported financial information.

Accounts Receivable. We generally recognize revenue as product is shipped (risk of loss for our products generally passes at time of shipment), net of provisions for estimated returns. Financial instruments, which potentially subject us to concentrations of credit risk, consist principally of trade accounts and notes receivable. Collections on our accounts receivable are made through several lockboxes maintained by our lenders. Credit risk associated with concentration of cash deposits is low as we have the right of offset with our lenders for the substantial portion of our cash balances. Concentrations of credit risk with respect to trade accounts receivable are within several industries. Generally, credit is extended once appropriate credit history and references have been obtained. We perform ongoing credit evaluations of customers and set credit limits based upon reviews of customers’ current credit information and payment history. We monitor customer payments and maintain a provision for estimated credit losses based on historical experience and specific customer collection issues that we have identified. Provisions to the allowance for doubtful accounts are made monthly and adjustments are made periodically based upon our expected ability to collect all such accounts. Generally we do not require collateral for the extension of credit.

Each month we consider all available information when assessing the adequacy of the provision for allowances, claims and doubtful accounts. Adjustments made with respect to the allowance for doubtful accounts often relate to improved information not previously available. Uncertainties with respect to the allowance for doubtful accounts are inherent in the preparation of financial statements. The rate of future credit losses may not be similar to past experience.

Inventories. Inventories are stated at the lower of cost or market. We conduct a lower of cost or market inventory valuation annually as of December 31 or more frequently if circumstances indicate potential write-downs. Our inventories are accounted for using a variety of methods including specific identification, average cost and the first-in first-out method of accounting. We regularly review inventory on hand and record adjustments for damaged and slow-moving inventory based on historical and current sales trends. Changes in product demand and our customer base may affect the value of inventory on hand which may require higher provisions for slow-moving inventory.

Adjustments made for damaged and slow-moving inventory often relate to improved information not previously available. Uncertainties with respect to adjustments for damaged and slow-moving inventory are inherent in the preparation of financial statements. The rate of future losses associated with damaged or slow moving inventory may not be similar to past experience.

New Accounting Pronouncements

In January 2010, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2010-06, which amends FASB Accounting Standards Codification Topic 820, “Fair Value Measurements and Disclosures” (“ASC 820”). The guidance requires companies to disclose the amount of significant transfers between Level 1 and Level 2 of the fair value hierarchy and the reasons for these transfers and the reasons for any transfers in or out of Level 3 of the fair value hierarchy. In addition, the guidance clarifies certain existing disclosure requirements. The standard did not have a material impact on the Company’s

 

48


Table of Contents
Index to Financial Statements

disclosures in its consolidated financial statements. See “Fair Value of Financial Assets and Liabilities” in Note 1 of the Company’s consolidated financial statements for the year ended December 31, 2010.

 

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

In the normal course of our business, we are exposed to market risk, primarily from changes in interest rates and the cost of metal we hold in inventory. We continually monitor exposure to market risk and develop appropriate strategies to manage this risk. With respect to our metal purchases, there is no recognized market to purchase derivative financial instruments to reduce the inventory exposure risks. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources” for a discussion of market risk relative to steel prices.

Our exposure to market risk for changes in interest rates relates primarily to the ABL facility, which is subject to variable interest rates. As of December 31, 2010, outstanding borrowings under the ABL facility were $106.0 million. Based on the weighted average borrowings outstanding on the ABL facility during the year ended December 31, 2010, a one percent increase or decrease in the weighted average facility rate would have resulted in a change to pretax interest expense of approximately $0.8 million for the period.

In February 2008, $250.0 million notional amount of outstanding borrowings under the Existing ABL facility were swapped from a floating LIBOR-based rate to a fixed rate. The swaps entitle us to receive quarterly payments of interest at a floating rate indexed to the three-month LIBOR and pay a fixed rate that ranges from 2.686% to 2.997%, converting a portion of the outstanding borrowings on our ABL facility from a floating rate obligation to a fixed rate obligation. Pretax realized gains and losses from derivatives which were recognized in earnings during the year ended December 31, 2010 amounted to $2.6 million of additional interest expense, consisting of $5.6 million of settlements, offset by $3.0 million of changes in the fair value of derivatives. The fair value of the Company’s ABL facility interest rate swaps was $1.8 million at December 31, 2010, the entire amount of which was classified as accrued liabilities in the consolidated balance sheet.

In November 2004 and December 2007, ORMS, which we acquired on December 31, 2010, entered into two separate interest rate swap agreements in connection with the Jeffersonville, Indiana IRBs discussed above. The notional amounts under these swaps correspond to the principal amounts of the IRBs, which were a combined $7.7 million as of December 31, 2010, and are reduced on an annual basis as the IRBs are redeemed. Under the swaps, the notional amounts under the Jeffersonville, Indiana IRBs were swapped from a floating rate based on a rate established by the Securities Industry and Financial Market Association (“SIFMA”) to fixed rates of 4.00% and 3.75%, converting the outstanding borrowings on the Jeffersonville, Indiana IRBs from floating rate obligations to fixed rate obligations. Since the ORMS acquisition closed on December 31, 2010, there was no impact to the Company’s earnings related to these swaps for the year ended December 31, 2010. Future pretax realized gains and losses from these derivatives will be recognized in earnings as an addition or reduction to interest expense, consisting of cash settlements and changes in the fair value of derivatives. The fair value of the ORMS interest rate swaps was $0.5 million at December 31, 2010, $0.1 million of which was classified as accrued liabilities and the remaining $0.4 million of which was classified as other non-current liabilities in the consolidated balance sheet.

At December 31, 2010, $226.3 million aggregate principal amount of Metals USA Notes were outstanding with a fixed interest rate of 11 1/8%. Changes in market interest rates will not impact cash interest payable on the Metals USA Notes. At February 25, 2011, the Metals USA Notes were traded at approximately 105.75% of face value, based on quoted market prices.

 

49


Table of Contents
Index to Financial Statements
Item 8. Financial Statements and Supplementary Data

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Flag Intermediate Holdings Corporation

We have audited the accompanying consolidated balance sheets of Flag Intermediate Holdings Corporation and subsidiaries (the “Company”) as of December 31, 2010 and 2009, and the related consolidated statements of operations, stockholder’s equity and comprehensive income (loss), and cash flows for each of the three years in the period ended December 31, 2010. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2010 and 2009, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2010, in conformity with accounting principles generally accepted in the United States of America.

/s/ DELOITTE & TOUCHE LLP

Houston, Texas

March 16, 2011

 

50


Table of Contents
Index to Financial Statements

FLAG INTERMEDIATE HOLDINGS CORPORATION AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in millions, except share amounts)

 

     December 31,  
   2010      2009  

Assets

     

Current assets:

     

Cash

   $ 15.2       $ 5.5   

Accounts receivable, net of allowance of $5.9 and $6.3, respectively

     149.3         124.8   

Inventories

     290.8         216.0   

Deferred income tax asset

     12.0         14.5   

Prepayments and other

     9.8         6.5   
                 

Total current assets

     477.1         367.3   

Property and equipment, net

     198.8         183.4   

Intangible assets, net

     7.4         8.4   

Goodwill

     47.3         45.6   

Other assets

     13.5         14.5   
                 

Total assets

   $ 744.1       $ 619.2   
                 

Liabilities and Stockholder’s Equity

     

Current liabilities:

     

Accounts payable

   $ 66.6       $ 56.3   

Accrued liabilities

     31.6         34.6   

Payable to parent

     9.6         —     

Current portion of long-term debt

     1.1         0.1   
                 

Total current liabilities

     108.9         91.0   

Long-term debt, less current portion

     345.4         307.1   

Deferred income tax liability

     62.5         56.9   

Due to parent

     47.0         —     

Other long-term liabilities

     22.2         23.1   
                 

Total liabilities

     586.0         478.1   
                 

Commitments and contingencies

     

Stockholder’s Equity:

     

Common stock, $.01 par value, 100 shares authorized, issued and outstanding at December 31, 2010 and 2009, respectively

     —           —     

Additional paid-in capital

     127.0         125.7   

Retained earnings

     30.7         15.8   

Accumulated other comprehensive income (loss)

     0.4         (0.4
                 

Total stockholder’s equity

     158.1         141.1   
                 

Total liabilities and stockholder’s equity

   $ 744.1       $ 619.2   
                 

The accompanying notes are an integral part of these consolidated financial statements.

 

51


Table of Contents
Index to Financial Statements

FLAG INTERMEDIATE HOLDINGS CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

(in millions)

 

     Years Ended December 31,  
     2010      2009     2008  

Net Sales

   $ 1,292.1       $ 1,098.7      $ 2,156.2   

Operating costs and expenses:

       

Cost of sales (exclusive of operating and delivery, and depreciation and amortization shown below)

     996.7         890.1        1,612.9   

Operating and delivery

     131.9         126.7        186.1   

Selling, general and administrative

     81.8         85.1        126.2   

Depreciation and amortization

     17.8         18.9        21.3   

Loss (gain) on sale of property and equipment

     0.3         —          (2.4

Advisory agreement termination charge

     3.3         —          —     

Impairment of assets

     —           —          5.1   
                         

Operating income (loss)

     60.3         (22.1     207.0   

Other (income) expense:

       

Interest expense

     37.2         44.9        54.5   

Gain on extinguishment of debt

     —           (13.6     —     

Other (income) expense, net

     —           0.3        (0.2
                         

Income (loss) before income taxes

     23.1         (53.7     152.7   

Provision (benefit) for income taxes

     8.2         (18.0     59.3   
                         

Net income (loss)

   $ 14.9       $ (35.7   $ 93.4   
                         

 

The accompanying notes are an integral part of these consolidated financial statements.

 

52


Table of Contents
Index to Financial Statements

FLAG INTERMEDIATE HOLDINGS CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDER’S EQUITY

AND COMPREHENSIVE INCOME (LOSS)

(in millions)

 

     Years Ended December 31,  
     2010     2009     2008  

Common Stock ($.01 Par)

      

Balance at beginning and end of period

   $ —        $ —        $ —     
                        

Additional Capital

      

Balance at beginning of period

   $ 125.7      $ 126.9      $ 121.3   

Stock-based compensation

     1.2        0.4        0.4   

Other

     0.1        (1.6     5.2   
                        

Balance at end of period

   $ 127.0      $ 125.7      $ 126.9   
                        

Retained Earnings

      

Balance at beginning of period

   $ 15.8      $ 51.5      $ 45.6   

Net income (loss)

     14.9        (35.7     93.4   

Dividends paid

     —          —          (87.5
                        

Balance at end of period

   $ 30.7      $ 15.8      $ 51.5   
                        

Accumulated Other Comprehensive Income (Loss)

      

Foreign currency translation adjustments

   $ 0.2      $ 0.7      $ (1.1

Deferred hedging gains (losses)

     0.6        1.7        (2.4

Deferred securities valuation gains (losses)

     —          0.2        (0.2
                        

Other comprehensive income (loss), net of deferred income taxes

     0.8        2.6        (3.7

Accumulated other comprehensive income (loss) at beginning of period

     (0.4     (3.0     0.7   
                        

Accumulated other comprehensive income (loss) at end of period

   $ 0.4      $ (0.4   $ (3.0
                        

Comprehensive Income (Loss)

      

Net income (loss)

   $ 14.9      $ (35.7   $ 93.4   

Other comprehensive income (loss)

     0.8        2.6        (3.7
                        

Total comprehensive income (loss)

   $ 15.7      $ (33.1   $ 89.7   
                        

 

The accompanying notes are an integral part of these consolidated financial statements.

 

53


Table of Contents
Index to Financial Statements

FLAG INTERMEDIATE HOLDINGS CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in millions)

 

     Years Ended December 31,  
     2010     2009     2008  

Cash flows from operating activities:

      

Net income (loss)

   $ 14.9      $ (35.7   $ 93.4   

Adjustments to reconcile net income to net cash (used in) provided by operating activities:

      

Loss (gain) on sale of property and equipment

     0.3        —          (2.4

Impairment of assets

     —          —          5.1   

Provision for bad debts

     2.4        2.9        3.1   

Depreciation and amortization

     19.8        21.2        23.6   

Gain on extinguishment of debt

     —          (13.6     —     

Amortization of debt issuance costs

     4.0        3.5        3.2   

Deferred income taxes

     1.6        4.2        (3.1

Stock-based compensation

     1.2        0.4        1.1   

Excess tax benefit from stock-based compensation

     (0.1     —          —     

Advisory agreement termination charge

     3.3        —          —     

Changes in operating assets and liabilities, net of acquisitions:

      

Accounts receivable

     (20.5     61.6        0.9   

Inventories

     (64.0     206.6        (12.8

Prepayments and other

     (3.0     —          0.4   

Accounts payable and accrued liabilities

     8.5        (5.3     (28.7

Other

     1.4        3.1        8.2   
                        

Net cash (used in) provided by operating activities

     (30.2     248.9        92.0   
                        

Cash flows from investing activities:

      

Sale of assets

     0.7        0.5        9.5   

Purchases of assets

     (4.0     (4.1     (12.2

Port City Metal Services contingent earn-out payment

     —          —          (5.0

Acquisition costs, net of cash acquired

     (28.0     (4.2     —     
                        

Net cash used in investing activities

     (31.3     (7.8     (7.7
                        

Cash flows from financing activities:

      

Borrowings on ABL facility

     99.5        119.0        1,056.0   

Repayments on ABL facility

     (68.5     (412.0     (968.5

Repayments of long-term debt

     (0.1     (35.6     (2.4

Deferred financing costs

     (6.8     —          (2.5

Excess tax benefit from stock-based compensation

     0.1        —          —     

Advances from parent

     47.0        —          —     

Dividends paid

     —          —          (87.5
                        

Net cash provided by (used in) financing activities

     71.2        (328.6     (4.9
                        

Net (decrease) increase in cash

     9.7        (87.5     79.4   

Cash, beginning of period

     5.5        93.0        13.6   
                        

Cash, end of period

   $ 15.2      $ 5.5      $ 93.0   
                        

Supplemental Cash Flow Information:

      

Cash paid for interest

   $ 34.6      $ 37.0      $ 48.6   
                        

Cash paid for income taxes

   $ 1.4      $ 3.7      $ 32.8   
                        

Cash (received) for income taxes

   $ (9.2   $ (20.0   $ (0.6
                        

Investments in property, plant and equipment not paid

   $ 0.5      $ 0.2      $ 0.9   
                        

The accompanying notes are an integral part of these consolidated financial statements.

 

54


Table of Contents
Index to Financial Statements

FLAG INTERMEDIATE HOLDINGS CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(dollars in millions)

1. Organization and Significant Accounting Policies

Description of the Business

Flag Intermediate Holdings Corporation (“Flag Intermediate”) and its wholly owned subsidiary Metals USA, Inc. (“Metals USA”) and the wholly owned subsidiaries of Metals USA are referred to collectively herein as the “Company.” The condensed consolidated financial statements include the accounts of Flag Intermediate, and Metals USA and its subsidiaries. Intercompany accounts and transactions have been eliminated in the consolidated financial statements. Flag Intermediate and Metals USA are wholly-owned subsidiaries of Metals USA Holdings Corp. (“Metals USA Holdings”). Metals USA prior to its November 30, 2005 acquisition by Apollo Management V L.P., (“Apollo Management” and together with its affiliated investment entities “Apollo” or “Apollo V”) (the “Merger”) is referred to herein as the “Predecessor Company.”

We believe that we are a leading provider of value-added processed carbon steel, stainless steel, aluminum and specialty metals, as well as manufactured metal components. For the year ended December 31, 2010, approximately 94% of our revenue was derived from our metals service center and processing activities, which are segmented into two groups: Flat Rolled and Non-Ferrous Group and Plates and Shapes Group. The remaining portion of our revenue was derived from our Building Products Group, which principally manufactures and sells aluminum products related to the residential remodeling industry. We purchase metal from primary producers that generally focus on large volume sales of unprocessed metals in standard configurations and sizes. In most cases, we perform the customized, value-added processing services required to meet the specifications provided by end-use customers. Our Plates and Shapes Group and Flat Rolled and Non-Ferrous Group customers are in the land and marine transportation, energy, aerospace, defense, electrical and appliance manufacturing, fabrication, furniture, commercial construction, and machinery and equipment industries. Our Building Products Group customers are primarily distributors and contractors engaged in the residential remodeling industry.

Summary of Significant Accounting Policies

Principles of Consolidation—The consolidated financial statements include the accounts of Flag Intermediate, and Metals USA and its subsidiaries. Intercompany accounts and transactions have been eliminated in the consolidated financial statements.

Use of Estimates and Assumptions—The preparation of financial statements in conformity with accounting principles generally accepted in the United States (“GAAP”) requires management to make estimates and assumptions that affect (i) the reported amounts of assets and liabilities, (ii) the disclosure of contingent assets and liabilities known to exist as of the date the financial statements are published, and (iii) the reported amount of net sales and expenses recognized during the periods presented. Adjustments made with respect to the use of estimates often relate to improved information not previously available. Uncertainties with respect to such estimates and assumptions are inherent in the preparation of financial statements; accordingly, actual results could differ from these estimates.

Reserves for Roofing Product Warranty Costs. Consistent with industry practice, the Company provides homeowners a manufacturer’s lifetime transferable limited warranty on its roofing products manufactured by the Building Products segment. The current warranty states that each roofing panel will be free from manufacturer’s defects in workmanship and materials for the lifetime of the original owner, or if transferred by the original owner 50 years from the date of installation. The warranty provides certain guarantees against weather and combustion, among other things. Depending on the facts and circumstances, the Company has various options for remedying product warranty claims including repair or replacement. Provisions for future warranty costs are

 

55


Table of Contents
Index to Financial Statements

recorded based on management’s estimates of future warranty costs, which incorporate historical trends of claims experience, sales history of products to which such costs relate, and other factors. We utilize an independent actuarial consultant to assist management in the determination of the adequacy of reserves for roofing product warranty costs. As of December 31, 2010 and 2009, $0.5 and $0.4, respectively, of estimated future warranty costs were classified as accrued warranty liabilities, and $2.8 and $2.5, respectively, were classified as other long-term liabilities in the consolidated balance sheet.

Allowance for Doubtful Accounts—The determination of collectability of the Company’s accounts receivable requires management to make frequent judgments and estimates in order to determine the appropriate amount of allowance needed for doubtful accounts. The Company’s allowance for doubtful accounts is estimated to cover the risk of loss related to accounts receivable. This allowance is maintained at a level we consider appropriate based on historical and other factors that affect collectibility. These factors include historical trends of write-offs, recoveries and credit losses, the careful monitoring of customer credit quality, and projected economic and market conditions. Different assumptions or changes in economic circumstances could result in changes to the allowance.

Inventories—Inventories are stated at the lower of cost or market. We conduct a lower of cost or market inventory valuation annually as of December 31 or more frequently if circumstances indicate potential write-downs. Our inventories are accounted for using a variety of methods including specific identification, average cost and the first-in first-out method of accounting. Inventory quantities are regularly reviewed and provisions for excess or obsolete inventory are recorded primarily based on our forecast of future demand and market conditions.

Valuation and Qualifying Accounts—We provide reserves for accounts receivable and inventory. The reserves for these accounts for the years ended December 31, 2010, 2009 and 2008 are summarized below:

 

     Balance at
Beginning
of Period
     Amount
Charged to
Expense
     Utilization
of Reserve
    Balance at
End of
Period
 

Year Ended December 31, 2010:

          

Allowance for doubtful accounts

   $ 6.3       $ 2.4       $ (2.8   $ 5.9   

Inventory valuation allowance

     6.4         0.3         (2.1     4.6   

Year Ended December 31, 2009:

          

Allowance for doubtful accounts

   $ 8.8       $ 2.9       $ (5.4   $ 6.3   

Inventory valuation allowance

     7.4         1.6         (2.6     6.4   

Year Ended December 31, 2008:

          

Allowance for doubtful accounts

   $ 8.3       $ 3.1       $ (2.6   $ 8.8   

Inventory valuation allowance

     6.0         2.2         (0.8     7.4   

Financial Derivatives—We use financial derivatives to mitigate the Company’s exposure to volatility in interest rates. The Company hedges only exposures in the ordinary course of business. The Company accounts for its derivative instruments in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 815 “Derivatives and Hedging” (“ASC 815”), which requires all derivatives to be carried on the balance sheet at fair value and meet certain documentary and analytical requirements to qualify for hedge accounting treatment.

During 2009, we removed the cash flow hedge designation from our interest rate swaps. As a result, we account for gains and losses on our interest rate swap derivatives based on realized and unrealized amounts. Realized gains and losses are determined by actual derivative settlements during the period. Unrealized gains and losses are based on the periodic mark to market valuation of our derivative contracts in place. Because management elected to discontinue the use of hedge accounting on our derivatives, changes in the fair value of our derivative contracts are recognized in earnings during the current period, as prescribed by ASC 815.

 

56


Table of Contents
Index to Financial Statements

Fair values of derivatives are determined from market observation or dealer quotations. Interest rate swap derivatives outstanding at December 31, 2010, have remaining terms ranging from one to six years. See Note 6 for additional information on underlying hedge categories, notional and fair values of derivatives, types and classifications of derivatives used, and gains and losses from hedging activity.

Property and Equipment—Property and equipment is stated at cost, and depreciation is computed using the straight-line method, net of estimated salvage values, over the estimated useful lives of the assets. Expenditures for repairs and maintenance are charged to expense when incurred. Expenditures which extend the useful lives of existing equipment are capitalized and depreciated. Upon retirement or disposition of property and equipment, the cost and related accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized. Leasehold improvements are capitalized and amortized over the lesser of the life of the lease or the estimated useful life of the asset.

Impairment of Long-lived Assets—Long-lived assets are comprised principally of property and equipment. We review long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. Impairment losses are recorded on assets used in operations when indicators of impairment are present and the undiscounted cash flows to be generated by those assets are less than the carrying amount.

Goodwill—Goodwill represents the residual between the consideration transferred in a business combination and the net of the acquisition-date amounts of identifiable assets acquired and liabilities assumed measured at fair value. We use estimates and judgments to measure the fair value of identifiable assets acquired and liabilities assumed.

Intangible Assets—We evaluate the recoverability of identifiable intangible assets whenever events or changes in circumstances indicate that an intangible asset’s carrying amount may not be recoverable. Such circumstances could include, but are not limited to: (1) a significant decrease in the market value of an asset, (2) a significant adverse change in the extent or manner in which an asset is used, or (3) an accumulation of costs significantly in excess of the amount originally expected for the acquisition of an asset. We measure the carrying amount of the asset against the estimated undiscounted future cash flows associated with it. Should the sum of the expected future net cash flows be less than the carrying value of the asset being evaluated, an impairment loss would be recognized. The impairment loss would be calculated as the amount by which the carrying value of the asset exceeds its fair value. The estimate of fair value is based on various valuation techniques, including the discounted value of estimated future cash flows over the life of the asset being evaluated. These assumptions require significant judgment and actual results may differ from assumed and estimated amounts.

Debt Issuance Costs—We defer certain expenses incurred to obtain debt financing and amortize these costs to interest expense over the term of the respective agreements.

Fair Value of Financial Assets and Liabilities—ASC Topic 820 “Fair Value Measurements and Disclosures” (“ASC 820”) defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. ASC 820 classifies the inputs used to measure fair value into the following hierarchy:

Level 1—Quoted prices in active markets for identical assets or liabilities.

Level 2—Observable inputs other than Level 1 prices such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities. The Company’s interest rate swap derivatives are valued using market data which is derived by combining certain inputs with quantitative models and processes to generate interest rate forward curves and discount factors (see Note 6).

 

57


Table of Contents
Index to Financial Statements

Level 3—Unobservable inputs that are supported by little or no market activity, but which are significant to the fair value of the assets or liabilities as determined by market participants.

Liabilities measured at fair value on a recurring basis are summarized below:

 

     December 31,      Fair Value Measurements at
Reporting Date Using
 
     2010      Level 1      Level 2      Level 3  

Interest rate swaps

   $ 2.3       $ —         $ 2.3       $ —     
     December 31,         
     2009                       

Interest rate swaps

   $ 5.8       $ —         $ 5.8       $ —     

Our receivables, payables, prepayments and accrued liabilities are current assets and obligations and on normal terms and, accordingly, the recorded values are believed by management to approximate fair value. Our 11 1/8% Senior Secured Notes due 2015 (the “Metals USA Notes”) are thinly traded public debt instruments; accordingly, their market prices at any balance sheet date may not be representative of the prices which would be derived from a more active market. The fair value of publicly traded debt is determined based on quoted market prices. The fair value of the Company’s debt that is not traded and is fixed-rate is estimated by discounting the interest payments and principal amount at the Company’s current borrowing rate (yield to maturity). For floating rate debt that is not traded, fair value is not sensitive to interest rates since coupons float with Treasury or London Interbank Offered Rate (“LIBOR”) yields, and book value is a reasonable approximation of fair value after considering the stability of the Company’s default risk. The estimated fair value of current and long-term debt at December 31, 2010 and 2009 was $401.8 and $298.2, respectively.

Foreign Currency Translation—The functional currency for our Canadian subsidiary, Allmet, is the Canadian dollar. We translate the functional currency into U.S. dollars based on the current exchange rate at the end of the period for the balance sheet and a weighted average rate for the period on the statement of operations. The resulting translation adjustments are recorded in Accumulated Other Comprehensive Income (Loss), a component of Stockholders’ Equity.

Accumulated Other Comprehensive Income (Loss)—The components of accumulated other comprehensive income (loss), net of tax, as of December 31 are summarized below.

 

     December 31,  
     2010     2009  

Foreign currency translation

   $ 0.5      $ 0.3   

Deferred hedging losses

     (0.1     (0.7
                

Accumulated other comprehensive income (loss), net of tax

   $ 0.4      $ (0.4
                

Our foreign currency translation gains and losses relate to our Canadian subsidiary, Allmet. See Note 6 for details of hedging gains and losses recognized in earnings which had been previously deferred in Accumulated Other Comprehensive Income (Loss).

Revenue recognition—We recognize revenues generally when products are shipped and our significant obligations have been satisfied. Shipping and handling costs billed to our customers are accounted for as revenues. Risk of loss for products shipped generally passes at the time of shipment. Provisions are made currently for estimated returns.

Cost of sales—Our Plates and Shapes and Flat Rolled and Non-Ferrous Groups classify, within cost of sales, the underlying commodity cost of metal purchased in mill form, the cost of inbound freight charges together with third-party processing cost, if any.

 

58


Table of Contents
Index to Financial Statements

Cost of sales with respect to our Building Products Group includes the cost of raw materials, manufacturing labor and overhead costs, together with depreciation and amortization expense associated with property, buildings and equipment used in the manufacturing process.

Operating and delivery expenses—Our operating and delivery expense reflects the cost incurred by our Plates and Shapes and Flat Rolled and Non-Ferrous Groups for labor and facility costs associated with the value-added metal processing services that we provide. With respect to our Building Products Group, operating costs are associated with the labor and facility costs attributable to the warehousing of our finished goods at our service center facilities. Delivery expense reflects labor, material handling and other third-party costs incurred with the delivery of product to customers.

Delivery expense totaled $36.8, $32.8, and $50.8 for the years ended December 31, 2010, 2009, and 2008, respectively.

Selling, general and administrative expenses—Selling, general and administrative expenses include sales and marketing expenses, executive officers’ compensation, office and administrative salaries, insurance, accounting, legal, computer systems, and professional services costs not directly associated with the processing, manufacturing, operating or delivery costs of our products.

Depreciation and amortization—Depreciation and amortization expense represents the costs associated with property, buildings and equipment used throughout the Company except for depreciation and amortization expense associated with the manufacturing assets employed by our Building Products Group, which is included within cost of sales. This caption also includes amortization of intangible assets.

Income taxes—Deferred income taxes are recognized for the future tax consequences of differences between the tax bases of assets and liabilities and their financial reporting amounts based on enacted tax laws and statutory tax rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established when necessary to reduce deferred tax assets to the amount that is more likely than not to be realized. We consider future taxable income and ongoing tax planning strategies in assessing the need for a valuation allowance.

New Accounting Pronouncements

In January 2010, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2010-06, which amends ASC 820. The guidance requires companies to disclose the amount of significant transfers between Level 1 and Level 2 of the fair value hierarchy and the reasons for these transfers and the reasons for any transfers in or out of Level 3 of the fair value hierarchy. In addition, the guidance clarifies certain existing disclosure requirements. The standard did not have a material impact on the Company’s disclosures in its consolidated financial statements. See “Fair Value of Financial Assets and Liabilities” above.

2. Acquisitions

Ohio River Metal Services

On December 31, 2010, we acquired all of the issued and outstanding stock of Ohio River Metal Services (“ORMS”), located in Jeffersonville, Indiana. ORMS operates a flat rolled metal service center that provides metal products and processing services to customers throughout the Ohio Valley. The purchase price for ORMS was $17.8, including the assumption of $8.4 of long-term debt, and was funded with borrowings under the ABL facility. The excess of the aggregate purchase price over the estimated fair value of the net assets acquired was

 

59


Table of Contents
Index to Financial Statements

$0.4, which was allocated to goodwill. The following table presents the provisional allocation of the acquisition cost to the assets acquired and liabilities assumed, based on their estimated fair values:

 

     December 31,
2010
 

Accounts receivable, trade

   $ 2.6   

Inventories

     5.0   

Other current assets

     0.1   

Property, plant and equipment

     18.3   

Fulfillment contract intangible asset

     0.8   

Goodwill

     0.4   
        

Total assets acquired

     27.2   
        

Accounts payable and accrued liabilities

     5.6   

Long-term debt

     8.4   

Interest rate swaps

     0.5   

Deferred tax liabilities

     3.3   
        

Total liabilities assumed

     17.8   
        

Net assets acquired

   $ 9.4   
        

The estimated amount of goodwill and related allocation of the fair values assigned to assets acquired and liabilities assumed are based on preliminary data and are subject to change based on final valuations of tangible and intangible assets. The fulfillment contract intangible asset will be amortized over fifteen years based on its estimated useful life. The pro forma effects of the ORMS acquisition would not have been material to our results of operations for the year ended December 31, 2010 and, therefore, are not presented.

J. Rubin & Co.

On June 28, 2010, we acquired all of the issued and outstanding stock of J. Rubin & Co. (“J. Rubin”) for $19.0. J. Rubin’s results of operations have been included in the condensed consolidated statement of operations since the date of acquisition. The purchase price was funded with existing cash, $17.8 of which was paid at closing and $1.2 of which was placed in escrow to secure the sellers’ indemnity obligations. The purchase price included $6.0 for the repayment of J. Rubin debt at closing. The excess of the aggregate purchase price over the estimated fair value of the net assets acquired was $3.5, which was allocated to goodwill. The estimated amount of goodwill and related allocation on the fair values assigned to assets acquired and liabilities assumed are based on preliminary data and are subject to change based on the final valuation of deferred taxes. The following table presents the allocation of the acquisition cost to the assets acquired and liabilities assumed, based on their estimated fair values:

 

     June 28,
2010
 

Accounts receivable, trade

   $ 3.8   

Inventories

     5.8   

Other current assets

     0.2   

Property, plant and equipment

     9.7   

Customer list intangible asset

     2.0   

Goodwill

     3.5   
        

Total assets acquired

     25.0   
        

Accounts payable and accrued liabilities

     2.5   

Deferred tax liabilities

     3.5   
        

Total liabilities assumed

     6.0   
        

Net assets acquired

   $ 19.0   
        

The customer list intangible asset will be amortized over ten years based on its estimated useful life. The pro forma effects of the J. Rubin acquisition would not have been material to our results of operations for the year ended December 31, 2010 and, therefore, are not presented.

 

60


Table of Contents
Index to Financial Statements

J. Rubin is a metal service center business that operates in Illinois, Wisconsin and Minnesota with a broad product mix consisting of carbon steel bars, carbon plate and laser-cut flat-rolled products. J. Rubin’s product mix and processing services are provided to a diverse range of end markets.

VR Laser

In February 2009, we purchased substantially all of the operating assets of VR Laser Services USA, Inc. (“VR Laser” or “Philadelphia Plate”) for approximately $4.2. The purchase price was funded by borrowings under our ABL facility. VR Laser is a metal processor of carbon steel plate products located in Philadelphia, Pennsylvania. The total purchase price represents the acquisition-date fair value of the individual assets acquired, which consist entirely of plant and equipment. The VR Laser acquisition replicates much of our existing processing capabilities in our Plates and Shapes Southeast geographic region and expands our service offerings in the marine and defense industries.

The Richardson Trident Company

See Note 19.

3. Inventories

Inventories consist of the following:

 

     December 31,  
     2010      2009  

Raw materials—

     

Plates and Shapes

   $ 138.6       $ 111.0   

Flat Rolled and Non-Ferrous

     108.3         70.2   

Building Products

     5.4         5.1   
                 

Total raw materials

     252.3         186.3   
                 

Work-in-process and finished goods—

     

Plates and Shapes

     —           —     

Flat Rolled and Non-Ferrous

     29.3         19.2   

Building Products

     9.2         10.5   
                 

Total work-in-process and finished goods

     38.5         29.7   
                 

Total inventories

   $ 290.8       $ 216.0   
                 

We recorded write-downs of $53.4 and $6.8 for inventory lower of cost or market adjustments during the years ended December 31, 2009 and 2008, respectively, in our metals service center business. We were not required to recognize any write-downs caused by the application of lower of cost or market accounting rules during 2010.

4. Property and Equipment

Property and equipment consists of the following:

 

     Estimated
Useful  Lives
     December 31,  
        2010     2009  

Land

     —         $ 11.3      $ 10.5   

Buildings and improvements

     3-40 years         90.9        71.5   

Machinery and equipment

     2-25 years         161.1        151.5   

Automobiles and trucks

     3-15 years         2.8        2.6   

Construction in progress

     —           1.0        0.5   
                   

Total property and equipment

        267.1        236.6   

Less: Accumulated depreciation

        (68.3     (53.2
                   

Total property and equipment, net

      $ 198.8      $ 183.4   
                   

 

61


Table of Contents
Index to Financial Statements

Depreciation expense for the years ended December 31, 2010, 2009 and 2008 was $14.0, $13.7 and $12.8, respectively.

5. Intangible Assets

The fair value of identifiable intangible assets was determined based on valuation appraisals. The valuation methodology used was the income approach, which developed discounted cash flows based on the future benefits expected to be derived from the assets.

The carrying amounts of the Company’s intangible assets are as follows:

 

     December 31,  
     2010     2009  

Customer lists

   $ 42.7      $ 40.7   

Effect of foreign currency

     0.1        0.1   

Less: Accumulated amortization

     (38.8     (35.2
                
   $ 4.0      $ 5.6   
                

Trade name

   $ 3.3      $ 3.3   

Less: Accumulated amortization

     (0.7     (0.5
                
   $ 2.6      $ 2.8   
                

Fulfillment contract

   $ 0.8      $ —     

Less: Accumulated amortization

     —          —     
                
   $ 0.8      $ —     
                

During the quarter ended June 30, 2010, we acquired $2.0 of customer list intangible assets as a result of the J. Rubin acquisition discussed in Note 2. We became a party to a fulfillment contract in connection with our acquisition of ORMS on December 31, 2010 (also discussed in Note 2), the value of which was estimated at $0.8.

We are amortizing customer lists over a range from five to ten years which approximates their estimated useful lives. We are amortizing both the Lynch Metals trade name and the ORMS fulfillment contract on a straight-line basis over fifteen years.

No significant residual value is estimated for our intangible assets. Aggregate amortization of intangible assets for the years ended December 31, 2010, 2009 and 2008 was $3.8, $5.2 and $8.5, respectively. In addition, we recognized a $0.9 impairment charge in the fourth quarter of 2008 in connection with the write-off of customer list intangible assets associated with the Patio Division of our building products business, which reduced the cost basis of such assets as of December 31, 2008.

Aggregate amortization of our intangible assets, excluding the effect of foreign currency, is as follows:

 

For the Year Ending December 31,

   Estimated
Amortization
Expense
 

2011

   $ 2.2   

2012

   $ 1.1   

2013

   $ 0.5   

2014

   $ 0.5   

2015

   $ 0.4   

Thereafter

   $ 2.7   

 

62


Table of Contents
Index to Financial Statements

6. Derivatives

In February 2008, we entered into a series of interest rate swap agreements that entitle us to receive quarterly payments of interest at a floating rate indexed to the three-month LIBOR and pay a fixed rate that ranges from 2.686% to 2.997%, thereby converting a combined $250.0 notional amount of the outstanding borrowings on our ABL facility from a floating rate obligation to a fixed rate obligation. The interest rate swap agreements all have initial terms of approximately three years or less.

The primary objective for our use of these interest rate hedges is to reduce our exposure to changes in interest rates on the ABL facility. The Company endeavors to finance its investment in working capital at the lowest possible cost and to manage variable interest rate exposure to achieve greater flexibility in meeting overall financial objectives.

In April 2009, we repaid outstanding borrowings on our ABL facility such that the outstanding balance on the ABL facility was less than the $250.0 notional amount associated with our series of interest rate swap agreements. In connection with the debt repayment, we removed the cash flow hedge designation from a portion of our interest rate swaps. As a result of the removal of the cash flow hedge designation, we reclassified into earnings $1.7 of cumulative net losses associated with the derivative contract in other comprehensive income (loss) (“OCI”), a component of stockholders’ equity, during the second quarter of 2009. The underlying derivative instrument will not expire until April 15, 2011, and all subsequent changes in the fair value of this instrument will be prospectively recognized in earnings.

As of September 30, 2009, and in connection with additional repayments of outstanding borrowings on the ABL facility, we removed the cash flow hedge designation from the remaining portion of our interest rate swaps. As a result of the removal of the cash flow hedge designations, we discontinued prospectively the use of hedge accounting on our remaining interest rate swaps. For the amount associated with the forecasted transactions still expected to occur, the net derivative instrument losses at the date of de-designation associated with these discontinued cash flow hedges will continue to be reported in OCI, and will be reclassified from OCI into earnings in the same periods during which the hedged forecasted transactions affect earnings. The amounts expected to be reclassified into earnings over the next twelve months amounted to $0.1 as of December 31, 2010. All subsequent changes in the fair value of these instruments have been recognized in earnings.

In November 2004 and December 2007, ORMS, which we acquired on December 31, 2010, entered into two separate interest rate swap agreements in connection with the Jeffersonville, Indiana Industrial Revenue Bonds (“IRBs”) discussed in Note 9. The notional amounts under these swaps correspond to the principal amounts of the IRBs, which were a combined $7.7 as of December 31, 2010, and are reduced on an annual basis as the IRBs are redeemed. Under the swaps, the notional amounts under the Jeffersonville, Indiana IRBs were swapped from a floating rate based on a rate established by the Securities Industry and Financial Market Association (“SIFMA”) to fixed rates of 4.00% and 3.75%, converting the outstanding borrowings on the Jeffersonville, Indiana IRBs from floating rate obligations to fixed rate obligations. Since the ORMS acquisition closed on December 31, 2010, there was no impact to the Company’s earnings related to these swaps for the year ended December 31, 2010. Future pretax realized gains and losses from these derivatives will be recognized in earnings as an addition or reduction to interest expense, consisting of cash settlements and changes in the fair value of derivatives. The fair value of the ORMS interest rate swaps was $0.5 at December 31, 2010, $0.1 of which was classified as accrued liabilities and the remaining $0.4 of which was classified as other non-current liabilities in the consolidated balance sheet.

 

63


Table of Contents
Index to Financial Statements

The following table presents the location within the consolidated balance sheet of all assets and liabilities associated with the Company’s outstanding derivatives at December 31, 2010.

 

Derivatives not designated as hedging
instruments under ASC 815

   Balance Sheet Location      Asset Derivatives      Liability Derivatives  
      Fair Value at December 31,  
          2010              2009              2010              2009      

Interest rate swaps

     Accrued liabilities       $ —         $ —         $ 1.9       $ 4.4   
     Other long-term liabilities         —           —           0.4         1.4   
                                      

Total derivatives not designated as hedging instruments under ASC 815

      $ —         $ —         $ 2.3       $ 5.8   
                                      

Total derivatives

      $ —         $ —         $ 2.3       $ 5.8   
                                      

The following tables present the pretax impact of the Company’s derivative instruments within the consolidated statements of operations for the years ended December 31, 2010, 2009 and 2008. Effective gains and losses had been deferred in OCI and recognized simultaneously with the impact of cost changes in the underlying transactions. Pretax realized gains and losses from derivatives which are recognized in earnings are included in interest expense in the consolidated statements of operations.

 

     Derivatives Designated as Cash Flow Hedges  
     Amount of Gain (Loss)
Recognized in OCI on
Derivatives
(Effective Portion)
    Amount of Gain (Loss)
Reclassified from OCI
into  Income
(Effective Portion)
     Amount of Gain (Loss)
Recognized in Income
on  Derivatives
(Ineffective Portion)
 
     Years Ended December 31,  
     2009      2008     2009     2008      2009      2008  

Interest rate swaps

   $ 3.4       $ (3.8   $ (2.7   $ 0.1       $ —         $ (0.2

 

     Derivatives Not Designated as Cash Flow Hedges  
     Amount of Gain (Loss) Recognized in Income on
Derivatives
 
     Years Ended December 31,  
         2010             2009             2008      

Interest rate swaps

   $ (2.6   $ (4.1   $ (2.4

The Company’s credit exposure related to interest rate swaps is represented by the fair value of swap agreements with a net positive fair value (asset position) to the Company at the reporting date. At such times, the outstanding instruments expose the Company to credit loss in the event of nonperformance by the counterparty to the agreements. However, we have not experienced any credit loss as a result of counterparty nonperformance in the past. Our credit risk exposure with respect to our interest rate swaps is limited to two counterparties, which we monitor based on credit ratings.

7. Other Assets

Other assets consist of the following:

 

     December 31,  
         2010              2009      

Deferred financing costs

   $ 8.9       $ 5.3   

Deferred debt offering costs

     3.6         4.3   

Deferred management fees

     —           3.7   

Other

     1.0         1.2   
                 

Total other assets

   $ 13.5       $ 14.5   
                 

 

64


Table of Contents
Index to Financial Statements

The Company incurred $6.8 of additional deferred financing costs during 2010 in connection with the amendment and restatement of the ABL facility. We did not incur deferred financing costs during 2009. Deferred financing costs incurred for the year ended December 31, 2008 were $2.5. Amortization of debt issuance costs for the years ended December 31, 2010, 2009, and 2008 were $4.0, $3.5, and $3.2, respectively.

For the year ended December 31, 2009, $1.0 of deferred debt issuance cost was accelerated in connection with the extinguishment of debt. In addition, $0.5 of deferred financing costs was written off in connection with the amendment and restatement of the ABL facility in December 2010.

8. Accrued Liabilities

Accrued liabilities consist of the following:

 

     December 31,  
         2010              2009      

Accrued salaries and employee benefits

   $ 10.8       $ 9.9   

Accrued income taxes

     3.1         —     

Accrued taxes, other than income

     2.8         2.4   

Accrued interest

     3.3         3.2   

Accrued insurance

     5.2         4.8   

Accrued audit and tax fees

     0.5         0.8   

Accrued warranty liability

     0.5         0.4   

Accrued lease terminations

     0.4         0.9   

Accrued management fees

     —           4.2   

Accrued Merger consideration – Predecessor common shares outstanding

     0.6         2.0   

Current portion of interest rate swap liability

     1.9         4.4   

Other

     2.5         1.6   
                 

Total accrued liabilities

   $ 31.6       $ 34.6   
                 

9. Debt

Debt consists of the following:

 

     December 31,  
         2010              2009      

Senior Secured Asset-Based Revolving Credit Facility (ABL facility)

   $ 106.0       $ 75.0   

11 1/8% Senior Secured Notes due 2015 (Metals USA Notes)

     226.3         226.3   

Industrial Revenue Bonds

     13.4         5.7   

Due to Parent

     47.0         —     

Other

     0.8         0.2   
                 

Total debt

     393.5         307.2   

Less—current portion of debt

     1.1         0.1   
                 

Total long-term portion of debt

   $ 392.4       $ 307.1   
                 

The weighted average interest rate under the ABL facility for the years ended December 31, 2010 and 2009 was 2.20% and 2.95%, respectively.

Senior Secured Asset-Based Revolving Credit Facility

On December 17, 2010, Flag Intermediate, Metals USA, and certain subsidiaries of Metals USA entered into an amended and restated loan and security agreement (the “ABL Credit Agreement”) with the lenders party thereto and Bank of America, N.A., as administrative agent and collateral agent.

 

65


Table of Contents
Index to Financial Statements

The ABL Credit Agreement provides for a new $500 (which may be increased up to $750 at the option of Metals USA, including up to $35.0 under a first-in last-out (“FILO”) tranche)), 5-year, senior secured asset-based credit facility (the “ABL facility”) that amended and restated Metals USA’s then-existing $625 senior secured asset-based credit facility that was scheduled to mature on November 30, 2011.

On March 9, 2011, we activated $25.0 of the FILO tranche, and thereafter aggregate commitments under the ABL facility. The ABL facility permits us to borrow on a revolving basis through the earlier of November 30, 2015 and 60 days prior to the scheduled maturity of the Metals USA Notes, unless the Metals USA Notes are refinanced to a date more than 5 years and 60 days after the closing date of the ABL facility and/or repaid prior to such date. Substantially all of our subsidiaries are borrowers under the ABL facility.

Borrowing Base. The maximum availability under the ABL facility is based on eligible receivables and eligible inventory, subject to certain reserves. Our borrowing availability fluctuates daily with changes in eligible receivables and inventory, less outstanding borrowings and letters of credit. The borrowing base is equal to:

 

   

85% of the net amount of eligible accounts receivable, plus

 

   

the lesser of (x) 80% of the lesser of the original cost or market value of eligible inventory and (y) 90% of the net orderly liquidation value of eligible inventory, plus

 

   

an incremental amount of the lesser of (x) the maximum commitments under the FILO tranche and (y) the sum of (i) 5% of the net amount of eligible accounts receivable and (ii) 5% of the net orderly liquidation value of eligible inventory during the effectiveness of any FILO tranche, less

 

   

reserves.

The ABL facility provides sub-limits for up to $25.0 of swingline loans and up to $100.0 for the issuance of letters of credit. Both the face amount of any outstanding letters of credit and any swingline loans will reduce borrowing availability under the ABL facility on a dollar-for-dollar basis.

As of December 31, 2010, we had $290.5 of eligible collateral, $106.0 in outstanding advances, $23.0 in open letters of credit and $161.5 of additional borrowing capacity. As of December 31, 2010, we had $15.2 of cash.

Guarantees and Security. Substantially all of our subsidiaries are defined as “borrowers” under the ABL Credit Agreement. The obligations under the ABL facility are guaranteed by Flag Intermediate and certain of our domestic subsidiaries and are secured by a first-priority lien and security interest in, among other things, accounts receivable, inventory and deposit accounts of Flag Intermediate, Metals USA and the subsidiaries of Metals USA party to the ABL Credit Agreement and a second-priority lien and security interest in, among other things, substantially all other tangible and intangible personal and real property owned by such companies, subject to certain exceptions.

Interest Rate and Fees. At Metals USA’s option, interest accrues on the loans made under the ABL facility at either LIBOR plus a specified margin (currently set at 2.50% (3.875% for the FILO tranche)), or the base rate (which is based off of the federal funds rate plus 0.50%, Bank of America’s prime rate or LIBOR plus 1.00%), plus a specified margin (currently set at 1.50% (2.875% for the FILO tranche)). The marginal rates vary based on our average monthly excess availability (as defined in the ABL Credit Agreement). The applicable base rate and the effective LIBOR rate for the loans made under the ABL facility were 3.25% and 0.303%, respectively, as of December 31, 2010.

A commitment fee is payable on any unused commitment equal to 0.375% per annum to the lenders under the ABL facility if utilization under the facility exceeds 40.0% of the total commitments under the facility and a commitment fee equal to 0.5% per annum if utilization under the facility is less than or equal to 40.0% of the total commitments under the facility. Customary letter of credit fees are also payable, as necessary.

 

66


Table of Contents
Index to Financial Statements

Certain Conditions Precedent and Covenants. As a condition precedent to any borrowing or issuance of a letter of credit, a material adverse effect shall not have occurred or exist. The ABL facility contains customary representations, warranties and covenants, including limitations on our ability to incur or guarantee additional debt, subject to certain exceptions, pay dividends, or make redemptions and repurchases, with respect to capital stock, repay debt, create or incur certain liens, make certain loans or investments, make acquisitions or investments, engage in mergers, acquisitions, asset sales, and engage in certain transactions with affiliates. The ABL facility requires a lock-box arrangement for collection of accounts receivable and proceeds from sales of inventory. Metals USA may make withdrawals from the lock-box unless an event of default exists or borrowing availability is less than the greater of (i) $50.0 and (ii) 12.5% of the lesser of (A) the borrowing base (not to exceed $62.5) and (B) the aggregate commitment. We do not have to maintain a minimum FCCR as long as our borrowing availability is greater than or equal to the greater of (i) $45.0 and (ii) 10% of the lesser of the borrowing base and the aggregate commitment (the “Minimum Availability”). We must maintain an FCCR of at least 1.0 to 1.0 if borrowing availability falls below the Minimum Availability. For purposes of determining covenant compliance, the FCCR is determined by dividing (i) the sum of Adjusted EBITDA (as defined in the ABL Credit Agreement) minus income taxes paid in cash (excluding certain specified deferred taxes) minus non-financed capital expenditures by (ii) the sum of certain distributions paid in cash, cash interest expense and scheduled principal reductions on debt, and is calculated based on such amounts for the most recent period of four consecutive fiscal quarters for which financial statements are available. FCCR and Adjusted EBITDA are each calculated on a pro forma basis. As of December 31, 2010, our FCCR was 2.44.

Certain Events of Default and Remedies. The ABL facility contains events of default with respect to: default in payment of principal when due, default in the payment of interest, fees or other amounts after a specified grace period, material breach of the representations or warranties, default in the performance of covenants, a default that causes or permits acceleration under any indebtedness with a principal amount in excess of a specified amount, certain bankruptcy events, certain ERISA violations, invalidity of certain security agreements or guarantees, material judgments, or a change of control. In the event of default, the ABL Credit Agreement may permit a majority of the lenders to: (i) restrict the amount of or refuse to make revolving loans; (ii) cause customer receipts to be applied against borrowings under the ABL facility which would cause Metals USA to suffer a rapid loss of liquidity and restrict the ability to operate on a day-to-day basis; (iii) restrict or refuse to provide letters of credit; or ultimately: (iv) terminate the commitments and the agreement; or (v) declare any or all obligations to be immediately due and payable if such default is not cured in the specified period required. Any payment default or acceleration under the ABL facility would also result in a default under the Metals USA Notes that would provide the holders of the Metals USA Notes with the right to demand immediate repayment.

In February 2008, $250.0 notional amount of outstanding borrowings under the ABL facility was swapped from a floating LIBOR-based rate to a fixed rate (see Note 6).

Costs related to the establishment of the ABL facility, in addition to subsequent amendments to the ABL facility, were capitalized and are being charged to interest expense over the life of the ABL facility. Unamortized financing costs of $8.9 as of December 31, 2010, are included in other non-current assets.

11 1/8% Senior Secured Notes Due 2015

On November 30, 2005, Flag Acquisition sold $275.0 aggregate principal amount of the Metals USA Notes. The Metals USA Notes bear interest at a rate per annum equal to 11 1/8%, payable semi-annually in arrears, on June 1 and December 1 of each year, commencing on June 1, 2006. The Metals USA Notes will mature on December 1, 2015. We may redeem some or all of the Metals USA Notes at any time on or after December 1, 2010 at a predetermined redemption price plus accrued and unpaid interest and additional interest, if any, to the applicable redemption date. If we experience a change of control and we do not redeem the Metals USA Notes, we will be required to make an offer to repurchase the Metals USA Notes at a price equal to 101% of the principal amount, plus accrued and unpaid interest and additional interest, if any, to the date of repurchase.

 

67


Table of Contents
Index to Financial Statements

As a result of the Merger, Metals USA assumed the obligations of Flag Acquisition including the Metals USA Notes. All domestic operating subsidiaries of Metals USA have agreed, jointly and severally with Flag Intermediate (“Guarantors”), to unconditionally and irrevocably guarantee Metals USA’s obligations under the Metals USA Notes and Indenture dated as of November 30, 2005. Additionally, Flag Intermediate has unconditionally guaranteed to be a primary obligor of the due and punctual payment and performance of the obligations under the Indenture.

Metals USA Holdings is not a guarantor of the Metals USA Notes. There is a limitation on the amount of funds which can be transferred by the Guarantors to Metals USA Holdings in the form of dividends. Such amount available for distribution shall be increased by an amount equal to 50% of Consolidated Net Income, as defined, or reduced by an amount equal to 100% of Consolidated Net Loss, as defined. No amount was available under the restricted payment provision contained in the indenture governing the Metals USA Notes as of December 31, 2010.

The indebtedness evidenced by the Metals USA Notes and the guarantees will rank: equally with all of our and the Guarantors’ existing and future senior indebtedness; junior in priority as to collateral that secures the ABL facility on a first-priority lien basis with respect to our and the Guarantors’ obligations under the ABL facility, any other debt incurred after December 1, 2005 that has a priority security interest relative to the Metals USA Notes in the collateral that secures the ABL facility, any hedging obligations related to the foregoing debt and all cash management obligations incurred with any lender under the ABL facility; equal in priority as to collateral that secures the Metals USA Notes and the guarantees on a first-priority lien basis with respect to our and the Guarantors’ obligations under any other equivalent priority lien obligations incurred after December 1, 2005; and senior to all of our and the Guarantors’ existing and future subordinated indebtedness. The Metals USA Notes will also be effectively junior to the liabilities of any non-guarantor subsidiaries.

The Metals USA Notes contain covenants that are customary for debt instruments, including limitations on our or the guarantors’ ability to incur or guarantee additional debt, subject to certain exceptions, pay dividends, or make redemptions and repurchases with respect to capital stock, create or incur certain liens, make certain loans or investments, make acquisitions or investments, engage in mergers, acquisitions, asset sales and sale lease-back transactions, and engage in certain transactions with affiliates.

The Metals USA Notes indenture contains certain customary events of default, including (subject, in some cases, to customary cure periods thresholds) defaults based on (1) the failure to make payments under the Metals USA indenture when due, (2) breach of covenants, (3) cross-defaults to other material indebtedness, (4) bankruptcy events and (5) material judgments. We were in compliance with all covenants as of December 31, 2010.

During the year ended December 31, 2009, we purchased $48.7 principal amount of the Metals USA Notes in the open market, resulting in a pretax gain of $13.6 (net of unamortized deferred financing costs) on debt extinguishment.

Costs related to the establishment of the Metals USA Notes were capitalized and are being charged to interest expense over the life of the Metals USA Notes. Unamortized issuance costs of $3.6 as of December 31, 2010, are included in other non-current assets.

Industrial Revenue Bonds

Metals USA is a conduit bond obligor on IRBs issued by the municipalities of Muskogee, Oklahoma and Jeffersonville, Indiana. As of December 31, 2010, our total indebtedness under the IRBs was $13.4. The IRBs are secured by certain real estate, leasehold improvements and equipment acquired with proceeds from the IRBs. The Muskogee, Oklahoma IRB is due in one lump sum of $5.7 on May 1, 2016. The Jeffersonville IRBs had principal amounts outstanding of $3.5 and $4.2 as of December 31, 2010, and are being redeemed in varying amounts

 

68


Table of Contents
Index to Financial Statements

annually through August 2021 and December 2027, respectively. The interest rates assessed on the IRBs vary from month to month. As of December 31, 2010, the weighted average interest rate on the IRBs was 0.65%. The IRBs place various restrictions on certain of our subsidiaries, including but not limited to maintenance of required insurance coverage, maintenance of certain financial ratios, limits on capital expenditures and maintenance of tangible net worth and are supported by letters of credit. We were in compliance with all covenants as of December 31, 2010.

Intercompany Loan Agreement

Metals USA Holdings has made advances to Metals USA through an intercompany loan agreement, as amended, (the “Loan Agreement”), which totaled $47.0 as of December 31, 2010. The advances have been primarily to accommodate working capital expansion and the Rubin acquisition discussed in Note 2. Borrowings under the Loan Agreement bear interest at a rate of LIBOR plus 6.50% per annum. The aggregate amount of Metals USA Holdings’ commitment under the Loan Agreement is $50.0, with a maturity date of June 15, 2012, unless otherwise extended or terminated earlier by the parties thereto. For the year ended December 31, 2010, Metals USA recognized $1.8 of interest expense related to the Loan Agreement.

Maturities

Scheduled maturities of long-term debt outstanding at December 31, 2010, are as follows:

 

     Years Ended December 31,  
     2011      2012      2013      2014      2015      Beyond  

ABL facility

   $ —         $ —         $ —         $ —         $ 106.0       $ —     

11 1/8 Senior Secured Notes Due 2015 (Metals USA Notes)

     —           —           —           —           226.3         —     

IRBs

     0.8         0.3         0.4         0.4         0.4         11.1   

Due to Parent

     —           47.0         —           —           —           —     

Capital lease and other obligations

     0.3         0.2         0.2         0.1         —           —     
                                                     

Total

   $ 1.1       $ 47.5       $ 0.6       $ 0.5       $ 332.7       $ 11.1   
                                                     

10. Income Taxes

The components of the provision (benefit) for income taxes are as follows:

 

     Years Ended December 31,  
         2010             2009             2008      

Current provision:

      

Federal

   $ 4.3      $ (24.3   $ 49.7   

State

     2.3        2.1        12.2   

Foreign

     —          —          0.5   
                        
   $ 6.6      $ (22.2   $ 62.4   
                        

Deferred provision (benefit):

      

Federal

     2.8        7.6        (2.4

State

     (1.2     (3.4     (0.7
                        
     1.6        4.2        (3.1
                        

Total provision (benefit)

   $ 8.2      $ (18.0   $ 59.3   
                        

 

69


Table of Contents
Index to Financial Statements

The components of earnings (loss) from continuing operations before income taxes were as follows:

 

     Years Ended December 31,  
     2010     2009     2008  

United States

   $ 24.1      $ (53.2   $ 153.9   

Foreign

     (1.0     (0.5     (1.2
                        

Earnings from continuing operations before income taxes

   $ 23.1      $ (53.7   $ 152.7   
                        

The provision (benefit) differs from an amount computed at the statutory rates as follows:

 

     Years Ended December 31,  
         2010             2009             2008      

Federal income tax at statutory rates

   $ 8.0      $ (18.8   $ 53.4   

State taxes, net of federal income tax benefit

     0.8        (1.7     5.9   

Nondeductible expenses and other:

      

Valuation allowance

     (2.8     —          —     

Revision of prior years’ tax estimates

     1.6        1.4        (1.4

Other

     0.6        1.1        1.4   
                        

Total provision (benefit)

   $ 8.2      $ (18.0   $ 59.3   
                        

The significant items giving rise to the deferred tax assets (liabilities) are as follows:

 

     December 31,  
     2010     2009  

Deferred tax assets:

    

Accounts receivable and inventories

   $ 2.4      $ 5.2   

Accrued liabilities

     6.5        7.3   

Tax attributes and carryforwards

     17.5        20.7   

Property and equipment

     —          6.4   

Intangible assets

     —          —     

Other Comprehensive Income

     (0.3     0.8   

Other

     10.9        9.9   
                

Total deferred tax assets

     37.0        50.3   
                

Deferred tax liabilities:

    

Foreign DISC

     (0.3     (0.5

Property and equipment

     (76.0     (78.3

Intangible assets

     (0.9     (0.8

Deferred Revenue

     (3.0     (3.0

Other

     (1.5     (1.5
                

Total deferred tax liabilities

     (81.7     (84.1
                

Valuation allowance

     (5.8     (8.6
                

Deferred tax assets (liabilities), net

   $ (50.5   $ (42.4
                

As of December 31, 2010, we recorded both federal and state current net deferred tax assets of $12.0 and we recorded both federal and state non-current deferred tax liabilities of $62.5. As of December 31, 2009, we recorded both federal and state current net deferred tax assets of $14.5, and we recorded both federal and state non-current deferred tax liabilities of $56.9.

As of December 31, 2010 and 2009, we had net operating loss (“NOL”) carry forwards for U.S. federal income taxes of approximately $11.4 and $20.6, respectively, which begin to expire in 2023. Such NOLs and other tax attributes are subject to the Internal Revenue Code Section 382 related to changes in ownership from

 

70


Table of Contents
Index to Financial Statements

our 2002 bankruptcy reorganization and the Merger. The lowest applicable annual limitation is approximately $5.7. The NOL carry forwards are based on returns as currently filed. Our tax returns are subject to periodic audit by the various taxing jurisdictions in which we operate. These audits can result in adjustments to taxes due or adjustments to the NOLs which are available to offset future taxable income.

Effective December 1, 2005, and in conjunction with the Merger, deferred tax liabilities of $61.2 were recorded as a result of purchase price adjustments to property and equipment, as well as intangible assets and inventories. Deferred tax assets of $1.2 were recorded as a result of purchase price adjustments to accrued and other long- term liabilities. As of November 30, 2005, the Predecessor Company had tax assets related to pre-bankruptcy goodwill of $16.5. The tax benefits of goodwill amortization will be available to the Company. Under purchase accounting, we have not recorded a deferred tax asset for the future benefit of tax amortization; however, we will apply the tax benefits first as a reduction to goodwill related to the Merger (to zero), then as a reduction of non-current intangible assets related to the Merger as the benefits are realized. In the periods December 31, 2010 and 2009, goodwill was reduced by $2.2 and $2.1, respectively, in connection with the recognition of such tax benefits.

SFAS No. 109 “Accounting for Income Taxes,” which was later codified into ASC Topic 740 “Income Taxes,” (“ASC 740”) requires that deferred tax assets be reduced by a valuation allowance, if based on the weight of available evidence, it is more likely than not that some portion or all of the deferred tax assets will not be realized. The valuation allowance is adjusted in the periods that we determine the more likely than not standard will or will not be met. A valuation allowance of $5.8 and $8.6 was recorded at December 31, 2010 and at December 31, 2009, respectively, against state and Canadian net operating loss carry forwards and net deferred tax assets. In 2010, the state NOL valuation allowance decreased by $3.2. Additionally, an increase of $0.4 was recorded against Canadian NOLs that we do not expect to utilize.

Unrecognized Tax Benefits

We adopted the provisions of FASB Interpretation No. 48, “Accounting for Uncertainty in Income Taxes” (“FIN 48”), which is now codified into ASC 740, on January 1, 2007. As a result of the implementation of this accounting pronouncement, we recognized a decrease of $3.1 to the January 1, 2007 balance of retained earnings. As of the date of adoption, our unrecognized tax benefits totaled $10.8. The total amount of unrecognized tax benefits that, if recognized, would impact the effective tax rate was $3.2 at the date of adoption. As of December 31, 2010 and December 31, 2009, our unrecognized tax benefits totaled $8.7 and $8.8 respectively, and based on the contingent and uncertain nature of our liability, we are unable to make an estimate of the period of potential cash settlement, if any, with respective taxing authorities.

We file numerous consolidated and separate income tax returns in the United States and various foreign jurisdictions. We are no longer subject to U.S. Federal income tax examinations for years before 2002 and are no longer subject to state and local, or foreign income tax examinations for years before 2000.

A reconciliation of the opening and ending balances of the consolidated liability for unrecognized income tax benefits for the years ended December 31, 2010, 2009 and 2008 are as follows:

 

     Year Ended December 31,  
         2010             2009             2008      

Balance at beginning of period

   $ 10.9      $ 8.5      $ 7.4   

Gross increases due to tax positions in prior periods

     1.4        0.1        1.7   

Gross decreases due to tax positions in prior periods

     (0.3     (0.7     (0.7

Gross increases due to tax positions in current period

     0.4        1.9        1.2   

Gross decreases due to tax positions in current period

     —          (0.1     —     

Gross increases due to balance sheet reclassifications

     —          1.2        —     

Decreases due to lapses of statutes of limitations

     (0.8     —          (1.1
                        

Balance at end of period

   $ 11.6      $ 10.9      $ 8.5   
                        

 

71


Table of Contents
Index to Financial Statements

At December 31, 2010, unrecognized tax benefits affected the Company’s effective income tax rate by $1.0. The liability for unrecognized tax benefits was further increased by $0.3 offset with an increase to deferred tax assets to properly report the gross liability for the period ended December 31, 2010. Such reclassification did not materially affect the Company’s financial condition. At December 31, 2009, unrecognized tax benefits affected the Company’s effective income tax rate by $1.2. The Company accounts for any applicable interest and penalties on uncertain tax positions as a component of income tax expense. The liability for uncertain income taxes as of December 31, 2010 and December 31, 2009 includes interest and penalties of $2.8 and $2.1, respectively.

11. Stockholder’s Equity

In accordance with its certificate of incorporation dated November 3, 2005, Flag Intermediate was authorized to issue 100 shares of capital stock, all of which were shares of common stock, $.01 par value. All such shares are issued and outstanding at December 31, 2010, and are owned by Metals USA Holdings through Flag Intermediate, its wholly owned subsidiary.

12. Stock-Based Compensation

Total stock-based compensation expense recognized for the years ended December 31, 2010, 2009 and 2008 was $1.2, $0.4, and $1.1 respectively. Stock-based compensation expense is included in our condensed consolidated statements of operations in “Selling, general and administrative expense.”

2005 Stock and Incentive Plan

Metals USA Holdings’ Amended and Restated 2005 Stock and Incentive Plan (the “2005 Plan”) permits the issuance of options and restricted stock awards to employees and directors of the Company. The Plan has reserved for issuance up to 2.4 million shares of common stock. The Plan has two tranches of options, Tranche A and Tranche B. Tranche A options vest on a pro-rata basis over five years, have a term of ten years, and expire if not exercised. Tranche B options, which include both a service and a performance condition, vest on the eighth anniversary of the date of grant or earlier dependent on the satisfaction of an internal rate of return on capital invested, have a term of ten years from date of grant, and expire if not exercised.

Tranche A Options

The weighted average grant-date fair value of Tranche A options outstanding as of December 31, 2010 was calculated using the following assumptions:

 

Expected dividend yield

     0.0

Expected stock price volatility

     54.9

Risk free interest rate

     4.3 - 4.6

Expected life of options (in years)

     6.5   

The following is a summary of stock option activity for Tranche A options for the year ended December 31, 2010:

 

     Weighted
Average
Grant Date
Fair Value
     Weighted
Average
Exercise
Price
     Weighted
Average
Remaining
Contractual
Life (Years)
     Number of
Options
 

Balance, December 31, 2009

   $ 3.66       $ 3.18            417,616   

Granted

     —           —              —     

Exercised

     3.98         2.30            (8,236

Canceled or expired

     3.98         2.30            (4,444
                 

Balance, December 31, 2010

   $ 3.65       $ 3.20         5.0         404,936   
                                   

Vested and Exercisable as of:

           

December 31, 2010

      $ 3.20         5.0         384,753   
                             

 

72


Table of Contents
Index to Financial Statements

A summary of Tranche A nonvested stock options for the year ended December 31, 2010 is presented below:

 

     Weighted
Average Grant -
Date Fair Value
     Number of
Options
 

Nonvested at December 31, 2009

   $ 3.90         159,863   

Granted

     —           —     

Vested

     3.90         (138,792

Canceled or expired

     3.98         (888
                 

Nonvested at December 31, 2010

   $ 3.85         20,183   
                 

As of December 31, 2010, all compensation cost associated with the Tranche A options had been recognized. The aggregate intrinsic value of the outstanding Tranche A options was $4.9 as of December 31, 2010.

Tranche B Options

The weighted average grant-date fair value of Tranche B options outstanding as of December 31, 2010 was calculated using the following assumptions:

 

Expected dividend yield

     0.0

Expected stock price volatility

     54.3

Risk free interest rate

     5

Expected life of options (in years)

     8.0   

The following is a summary of stock option activity for Tranche B options for the year ended December 31, 2010:

 

     Weighted
Average
Grant Date
Fair Value
     Weighted
Average
Exercise
Price
     Weighted
Average
Remaining
Contractual
Life (Years)
     Number of
Options
 

Balance, December 31, 2009

   $ 3.97       $ 2.30            68,986   

Granted

     —           —              —     

Exercised

     3.98         2.30            (13,726

Canceled or expired

     3.98         2.30            (4,444
                 

Balance, December 31, 2010

   $ 3.97       $ 2.30         4.9         50,816   
                                   

Vested and Exercisable as of:

           

December 31, 2010

      $ 2.30         4.9         50,816   
                             

All Tranche B stock options outstanding as of December 31, 2010 are fully vested and exercisable. As of December 31, 2010, all compensation cost associated with the Tranche B options had been recognized. The aggregate intrinsic value of the outstanding Tranche B options was $0.7 as of December 31, 2010.

2010 Long-Term Incentive Plan

On March 19, 2010, our Board of Directors adopted, and our stockholders approved, the Metals USA Holdings 2010 Long-Term Incentive Plan (the “2010 Plan”). The purposes of the 2010 Plan are to further the growth and success of Metals USA and to reward and incentivize the outstanding performance of our key employees, directors, consultants and other service providers by aligning their interests with those of stockholders through equity-based compensation and enhanced opportunities for ownership of shares of our common stock.

 

73


Table of Contents
Index to Financial Statements

Subject to adjustment, the 2010 Plan authorizes the issuance of up to 2,614,650 shares of common stock pursuant to the grant or exercise of nonqualified stock options, incentive stock options, stock appreciation rights, restricted stock, restricted stock units and other equity-based awards.

The 2010 Plan will be administered by our Board of Directors or the Compensation Committee thereof, or such other committee of the Board of Directors as the Board of Directors may designate from time to time (the “Committee”). Among other things, the Committee will have the authority to select individuals to whom awards may be granted, to determine the type of award, to determine the terms and conditions of any such awards, including vesting terms, to interpret the terms and provisions of the 2010 Plan and awards granted thereunder and to otherwise administer the plan.

Stock Options

On September 13, 2010, pursuant to the 2010 Plan, 632,000 options to acquire the Company’s common stock were granted to certain members of our management and to members of our Board of Directors with an exercise price equal to the fair market value as of the date of the grant. The options granted to management vest ratably over four years retroactive to July 1, 2010 and have a contractual term of ten years. The options granted to the members of our Board of Directors vest ratably over three years retroactive to July 1, 2010, and also have a contractual term of ten years.

The fair value of the 2010 Plan option awards was estimated on the date of grant using a Black-Scholes option valuation model using the following valuation assumptions:

 

Expected dividend yield

     0

Expected stock price volatility

     62.5

Risk free interest rate

     1.51

Expected life (in years)—management options

     5.0   

Expected life (in years)—Board of Director options

     4.0   

Exercise price

   $ 13.17   

The following is a summary of stock option activity for the 2010 Plan options for the year ended December 31, 2010:

 

     Weighted
Average
Grant Date
Fair Value
     Weighted
Average
Exercise
Price
     Weighted
Average
Remaining
Contractual
Life (Years)
     Number of
Options
 

Balance, December 31, 2009

   $ —         $ —              —     

Granted

     6.94         13.17            632,000   

Exercised

     —           —              —     

Canceled or expired

     —           —              —     
                 

Balance, December 31, 2010

   $ 6.94       $ 13.17         9.5         632,000   
                                   

Vested and Exercisable as of:

           

December 31, 2010

      $ —           —           —     
                             

As of December 31, 2010, outstanding options granted under the 2010 Plan had an aggregate intrinsic value of $1.3, with approximately $3.6 of total unrecognized compensation expense remaining to be amortized over a weighted average period of 3.4 years.

Restricted Stock

On September 13, 2010, pursuant to the 2010 Plan, 130,100 shares of restricted stock were granted to certain members of our management and to members of our Board of Directors. The awards granted to

 

74


Table of Contents
Index to Financial Statements

management vest ratably over four years retroactive to July 1, 2010, while the awards granted to the members of our Board of Directors vest ratably over three years retroactive to July 1, 2010. The fair value of the restricted stock granted was $13.17 per share, determined based on the fair market value of the Company’s common stock on the grant date. As of December 31, 2010, approximately $1.5 of total unrecognized compensation expense was expected to be recognized over a weighted average period of 3.3 years.

13. Segment and Related Information

We follow the provisions of ASC Topic 280 “Segment Reporting,” which requires the utilization of a “management approach” to define and report the financial results of operating segments. The management approach defines operating segments along the lines used by the Company’s chief operating decision maker (“CODM”) to assess performance and make operating and resource allocation decisions. Our CODM evaluates performance and allocates resources based primarily on operating income (loss). The accounting policies of the reportable segments are the same as those described in the summary of significant accounting policies in Note 1.

Our operating segments are based on internal management reporting, which disaggregates business units by product group and geographic region. Certain geographic regions and product groups with similar economic and other basic characteristics are aggregated for reporting purposes. Our operating segments are organized into three product group reportable segments. Each segment is described as follows:

 

   

Plates and Shapes consists of operating facilities that maintain an inventory focusing on carbon products such as structural plate, beams, bars and tubing. This segment provides processing services such as cutting, cambering/leveling, punching, bending, shearing, cut-to-length, blast and paint, and tee-splitting.

 

   

Flat Rolled and Non-Ferrous consists of operating facilities that maintain an inventory of cold rolled, coated, and hot rolled steel products and various non-ferrous flat rolled products including aluminum, stainless steel, copper and brass. This segment provides processing services such as slitting, precision blanking, leveling, cut-to-length, punching, and shearing.

 

   

Building Products consists of manufacturing plant locations and sales centers that produce and distribute aluminum and steel building products consisting of covered canopies and walkways, awnings, sunrooms, solariums and other products primarily for the commercial and residential building products industries.

The following tables summarize financial information regarding segments:

 

     Plates and
Shapes
    Flat
Rolled and
Non-Ferrous
     Building
Products
    Corporate
and Other
    Total  

Year Ended December 31, 2010:

           

Net sales

   $ 538.0      $ 680.5       $ 83.0      $ (9.4   $ 1,292.1   

Operating income (loss)

     38.4        45.3         (0.6     (22.8     60.3   

Capital expenditures

     2.3        0.7         —          1.0        4.0   

Depreciation and amortization(1)

     9.2        7.0         2.4        1.2        19.8   

Year Ended December 31, 2009:

           

Net sales

   $ 523.0      $ 490.7       $ 93.2      $ (8.2   $ 1,098.7   

Operating income (loss)

     (14.8     16.5         (3.9     (19.9     (22.1

Capital expenditures

     3.3        0.5         —          0.3        4.1   

Depreciation and amortization(1)

     9.8        6.9         2.8        1.7        21.2   

Year Ended December 31, 2008:

           

Net sales

   $ 1,161.2      $ 882.9       $ 126.0      $ (13.9   $ 2,156.2   

Operating income (loss)

     170.7        78.2         (9.1     (32.8     207.0   

Capital expenditures

     8.6        2.2         0.7        0.7        12.2   

Depreciation and amortization(1)

     9.2        7.1         2.9        4.4        23.6   

 

(1) Includes depreciation expense reflected in cost of goods sold for the Building Products Group.

 

75


Table of Contents
Index to Financial Statements
     December 31,  
     2010      2009  

Total Assets:

     

Plates and Shapes

   $ 328.1       $ 291.3   

Flat Rolled and Non-Ferrous

     329.8         228.4   

Building Products

     38.7         43.2   

Corporate and Other

     47.5         56.3   
                 

Consolidated

   $ 744.1       $ 619.2   
                 

Goodwill:

     

Plates and Shapes

   $ 14.9       $ 15.2   

Flat Rolled and Non-Ferrous

     24.4         20.5   

Building Products

     2.2         2.1   

Corporate and Other

     5.8         7.8   
                 

Consolidated

   $ 47.3       $ 45.6   
                 

The amounts shown as an operating loss under the column heading “Corporate and Other” consist primarily of general and administrative costs that are not allocated to the segments. The reconciliation of operating income (loss) to income (loss) before taxes and discontinued operations is shown within the Consolidated Statements of Operations and therefore is not separately presented.

We test for goodwill impairment annually at the reporting unit level using a fair value approach, in accordance with accounting guidance for “Goodwill.” During the fourth quarter of 2010, we changed the date of our annual impairment test from December 31 to October 31. The change was preferable in order to alleviate resource constraints that exist in connection with the Company’s year-end closing and financial reporting process. Accordingly, in order to meet our reporting deadlines and to provide additional time to complete the analysis each year, the annual impairment testing date was changed to an earlier date in the fourth quarter. As it was impracticable to objectively determine operating and valuation estimates for periods prior to October 31, 2010, the Company has prospectively applied the change in annual impairment test date from October 31, 2010. The Company does not believe this change would have delayed, accelerated, or avoided an impairment charge and the result of the October 31, 2010 test was that there was no impairment.

Changes in goodwill for the year ended December 31, 2010 are primarily related to our acquisitions of J. Rubin and ORMS, which added $3.5 and $0.4 of goodwill, respectively, to our Flat Rolled and Non-Ferrous segment. Other changes in goodwill for the year ended December 31, 2010, are primarily attributable to accounting for tax benefits associated with tax-deductible goodwill recognized in connection with the Merger and the acquisition of Port City Metal Services, which were taxable business combinations. Goodwill recorded at the Building Products Group was increased by $0.1 for the year ended December 31, 2010 due to the effect of foreign currency.

We recognized a $4.2 charge during the year ended December 31, 2008 related to the impairment of goodwill associated with our building products business, which was recorded at the Corporate Segment. Such amount represents the cumulative goodwill impairment we have recognized on goodwill recorded in connection with the Merger, as well as the acquisitions of Port City, Allmet, and Lynch Metals.

We were not required to recognize any write-downs caused by the application of lower of cost or market accounting rules during 2010. We recorded write-downs of $43.9 and $9.5 in our Plates and Shapes Group and Flat Rolled and Non-ferrous Groups, respectively, for inventory lower of cost or market adjustments during 2009. During the fourth quarter of 2008, we recorded write-downs of $5.8 and $1.0 in our Plates and Shapes Group and Flat Rolled and Non-Ferrous Groups, respectively, for inventory lower of cost or market adjustments.

 

76


Table of Contents
Index to Financial Statements

Our areas of operations are solely in the U.S. and Canada. No domestic or foreign geographic area is significant to the consolidated operations. Export sales were $13.6, $16.6 and $30.9 for the years ended December 31, 2010, 2009 and 2008, respectively.

We have a broad customer base within the U.S. with no single customer being significant to consolidated operations. For the years ended December 31, 2010, 2009, and 2008, sales to any one customer did not exceed 10% of consolidated revenues.

14. Employee Benefit Plans

The Metals USA 401(k) Plan (the “Plan”) was established on June 1, 1998. Effective January 1, 2004, participants are eligible to join the Plan on hire date. Employee contributions are limited to the Internal Revenue Service established annual dollar limits.

Employees become 50% vested in Company matching contributions and earnings after completing one year of service and fully vested after completing two years of service.

The Metals USA Union 401(k) Plan was established on October 1, 1998 to provide a standard defined contribution savings plan for all employees covered under the terms of a collective bargaining agreement (the “Union Plan”). Metals USA is not obligated by the Union Plan to make contributions, unless required by the operative collective bargaining agreement. The Union Plan allows the employee to contribute up to 25% of their eligible compensation.

The Company’s matching contributions for both plans for the years ended December 31, 2010, 2009 and 2008 were $0.6, $1.0 and $1.9, respectively.

15. Commitments and Contingencies

Operating Lease Agreements

We lease certain office space, warehouse space and equipment under operating leases. Minimum rental commitments under operating leases at December 31, 2010 are as follows:

 

Years Ended December 31,

   Minimum
Rental
Commitments
 

2011

   $ 13.8   

2012

     8.7   

2013

     6.0   

2014

     4.4   

2015

     4.0   

Thereafter

     5.2   
        

Total minimum lease payments

   $ 42.1   
        

Rental expense for operating leases was $14.2, $16.8 and $16.8 for the years ended December 31, 2010, 2009 and 2008, respectively.

Pension Fund Withdrawal Obligation

During 2007, we discontinued our participation in a multiemployer pension fund. In connection with our cessation of contributions to the plan, we were assessed a withdrawal liability of approximately $5.6, which we are paying in monthly installments through 2021. As of December 31, 2010, our total withdrawal liability, including interest and amortization charges, amounted to approximately $6.7.

 

77


Table of Contents
Index to Financial Statements

Letters of Credit

Letters of credit outstanding at December 31, 2010 consist of a letters of credit in the amount of $11.3 in conjunction with the IRBs (see Note 9) and other letters of credit aggregating $11.7 (total letters of credit of $23.0 at December 31, 2010). Other letters of credit consist primarily of collateral support for our property and casualty insurance program. All letters of credit reduce the amount available to borrow under the ABL facility.

Contingencies

From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. We believe the resolution of these matters and the incurrence of their related costs and expenses should not have a material adverse effect on our consolidated financial position, results of operations or liquidity.

16. Related Party Transactions

Upon completion of the Merger, Metals USA Holdings entered into an advisory agreement with Apollo under which Apollo or its affiliates provided us with advisory services. Pursuant to the agreement, Apollo received an annual advisory fee equal to $2.0, payable on March 15 of every year, starting on March 15, 2006. Apollo elected to waive $0.5 of the annual advisory fee indefinitely, but reserved the right to revoke this waiver. The payment obligation was recorded as a current liability at the present value of minimum future annual payments of $1.5 and deferred advisory fees of $8.6 were amortized on a straight-line basis over the term of the agreement.

The advisory agreement would have terminated on December 31, 2012; however, Apollo elected to terminate the advisory agreement in connection with the completion of Metals USA Holding’s IPO in April 2010. The payment obligation was terminated in consideration of $2.5. Unamortized deferred advisory fees of $3.3 were charged to expense during the second quarter of 2010.

Intercompany Loan Agreement

Metals USA Holdings has made advances to Metals USA through an intercompany loan agreement, as amended, (the “Loan Agreement”), which totaled $47.0 as of December 31, 2010. The advances have been primarily to accommodate working capital expansion and the Rubin acquisition discussed in Note 2. Borrowings under the Loan Agreement bear interest at a rate of LIBOR plus 6.50% per annum. The aggregate amount of Metals USA Holdings’ commitment under the Loan Agreement is $50.0, with a maturity date of June 15, 2012, unless otherwise extended or terminated earlier by the parties thereto. For the year ended December 31, 2010, Metals USA recognized $1.8 of interest expense related to the Loan Agreement.

Payable to Parent

Metals USA has recorded a payable to Metals USA Holdings in the amount of $6.1 for the receipt of a Federal income tax refund during the year ended December 31, 2010. Other amounts payable to Metals USA Holdings as of December 31, 2010, are the result of routine intercompany transactions.

17. Quarterly Financial Information (Unaudited)

Selected unaudited quarterly financial information for the years ended December 31, 2010 and 2009 is as follows:

 

     2010 Quarter Ended      2009 Quarter Ended  
     Dec. 31      Sept. 30      June 30      Mar. 31      Dec. 31     Sept. 30      June 30     Mar. 31  

Net sales

   $ 323.9       $ 345.3       $ 335.0       $ 287.9       $ 245.3      $ 255.4       $ 267.8      $ 330.2   

Operating income (loss)

     11.3         18.9         17.4         12.7         5.1        12.8         (19.2     (20.8

Net income (loss)

     3.2         5.0         5.3         1.4         (4.3     0.1         (10.9     (20.6

 

78


Table of Contents
Index to Financial Statements

18. Guarantor/Non-Guarantor Subsidiary Financial Information

The following condensed consolidating financial information is for the parent company, Flag Intermediate, a holding company with no assets or operations and Metals USA, a management holding company which owns 100% of the guarantor and non-guarantor subsidiaries.

 

As of December 31, 2010

  Flag
Intermediate
Holdings Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Assets

           

Current assets:

           

Cash

  $ —        $ 12.5      $ 2.0      $ 0.7      $ —        $ 15.2   

Accounts receivable

    —          0.3        148.1        1.1        (0.2     149.3   

Inventories

    —          —          289.6        1.2        —          290.8   

Deferred tax asset

    —          12.0        —          —          —          12.0   

Prepayments and other

    —          2.1        7.7        —          —          9.8   
                                               

Total current assets

    —          26.9        447.4        3.0        (0.2     477.1   

Property and equipment, net

    —          1.9        194.4        2.5        —          198.8   

Intangible assets, net

    —          —          7.1        0.3        —          7.4   

Goodwill

    —          5.8        39.3        2.2        —          47.3   

Investment in subsidiaries, net

    158.1        879.8        —          —          (1,037.9     —     

Other assets

    —          13.0        0.5        —          —          13.5   
                                               

Total assets

  $ 158.1      $ 927.4      $ 688.7      $ 8.0      $ (1,038.1   $ 744.1   
                                               

Liabilities and Stockholder’s Equity

           

Current liabilities:

           

Accounts payable

  $ —        $ 0.9      $ 65.7      $ 0.2      $ (0.2   $ 66.6   

Accrued liabilities

    —          17.8        13.6        0.2        —          31.6   

Payable to parent

    —          9.6        —          —          —          9.6   

Current portion of long-term debt

    —          —          1.1        —          —          1.1   
                                               

Total current liabilities

    —          28.3        80.4        0.4        (0.2     108.9   

Long-term debt, less current portion

    —          332.3        13.1        —          —          345.4   

Deferred income tax liability

    —          59.2        3.3        —          —          62.5   

Intercompany payable (receivable)

    —          331.4        (330.0     45.6        —          47.0   

Other long-term liabilities

    —          18.1        3.6        0.5        —          22.2   
                                               

Total liabilities

    —          769.3        (229.6     46.5        (0.2     586.0   
                                               

Commitments and contingencies

           

Stockholder’s equity:

           

Common stock, $.01 par value, 100 shares authorized, issued and outstanding at December 31, 2010

    —          —          —          —          —          —     

Additional paid-in capital

    127.0        127.0        705.7        23.1        (855.8     127.0   

Retained earnings

    30.7        30.7        212.6        (61.6     (181.7     30.7   

Accumulated other comprehensive income

    0.4        0.4        —          —          (0.4     0.4   
                                               

Total stockholder’s equity

    158.1        158.1        918.3        (38.5     (1,037.9     158.1   
                                               

Total liabilities and stockholder’s equity

  $ 158.1      $ 927.4      $ 688.7      $ 8.0      $ (1,038.1   $ 744.1   
                                               

 

79


Table of Contents
Index to Financial Statements

As of December 31, 2009

  Flag
Intermediate
Holdings Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Assets

           

Current assets:

           

Cash

  $ —        $ 4.5      $ 0.6      $ 0.4      $ —        $ 5.5   

Accounts receivable

    0.5        —          112.3        1.7        10.3        124.8   

Inventories

    —          —          214.9        1.1        —          216.0   

Deferred tax asset

    —          14.5        —          —          —          14.5   

Prepayments and other

    —          2.9        3.5        0.1        —          6.5   
                                               

Total current assets

    0.5        21.9        331.3        3.3        10.3        367.3   

Property and equipment, net

    —          1.5        179.3        2.6        —          183.4   

Intangible assets, net

    —          0.5        7.3        0.6        —          8.4   

Goodwill

    —          7.8        35.7        2.1        —          45.6   

Investment in subsidiaries, net

    141.1        844.3        —          —          (985.4     —     

Other assets

    —          14.0        0.5        —          —          14.5   
                                               

Total assets

  $ 141.6      $ 890.0      $ 554.1      $ 8.6      $ (975.1   $ 619.2   
                                               

Liabilities and Stockholder’s Equity

           

Current liabilities:

           

Accounts payable

  $ —        $ 1.3      $ 54.8      $ 0.2      $ —        $ 56.3   

Accrued liabilities

    —          11.8        12.3        0.2        10.3        34.6   

Current portion of long-term debt

    —          —          0.1        —          —          0.1   
                                               

Total current liabilities

    —          13.1        67.2        0.4        10.3        91.0   

Long-term debt, less current portion

    —          301.3        5.8        —          —          307.1   

Deferred income tax liability

    —          56.9        —          —          —          56.9   

Intercompany payable (receivable)

    0.5        358.2        (404.3     45.6        —          —     

Other long-term liabilities

    —          19.4        3.3        0.4        —          23.1   
                                               

Total liabilities

    0.5        748.9        (328.0     46.4        10.3        478.1   
                                               

Commitments and contingencies

           

Stockholder’s equity:

           

Common stock, $.01 par value, 100 shares authorized, issued and outstanding at December 31, 2009

    —          —          —          —          —          —     

Additional paid-in capital

    125.7        125.7        705.7        23.2        (854.6     125.7   

Retained earnings

    15.8        15.8        176.4        (61.4     (130.8     15.8   

Accumulated other comprehensive loss

    (0.4     (0.4     —          0.4        —          (0.4
                                               

Total stockholder’s equity

    141.1        141.1        882.1        (37.8     (985.4     141.1   
                                               

Total liabilities and stockholder’s equity

  $ 141.6      $ 890.0      $ 554.1      $ 8.6      $ (975.1   $ 619.2   
                                               

 

80


Table of Contents
Index to Financial Statements

For the Year Ended December 31, 2010

  Flag
Intermediate
Holdings
Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Net sales

  $ —        $ —        $ 1,284.7      $ 7.4      $ —        $ 1,292.1   

Operating costs and expenses:

           

Cost of sales (exclusive of operating and delivery, and depreciation and amortization shown below)

    —          —          990.9        5.8        —          996.7   

Operating and delivery

    —          0.6        130.7        0.6        —          131.9   

Selling, general and administrative

    —          4.6        76.6        0.6        —          81.8   

Depreciation and amortization

    —          1.2        16.2        0.4        —          17.8   

Loss on sale of property and equipement

    —          —          0.3        —          —          0.3   

Advisory agreement termination charge

    —          3.3        —          —          —          3.3   
                                               

Operating income (loss)

    —          (9.7     70.0        —          —          60.3   

Other (income) expense:

           

Interest expense

    —          35.2        0.2        —          —          35.4   

Intercompany charges

    —          (32.9     33.7        1.0        —          1.8   

Equity in earnings of subsidiaries

    (14.9     (35.1     —          —          50.0        —     
                                               

Income (loss) before income taxes

    14.9        23.1        36.1        (1.0     (50.0     23.1   

Provision for income taxes

    —          8.2        —          —          —          8.2   
                                               

Net income (loss)

  $ 14.9      $ 14.9      $ 36.1      $ (1.0   $ (50.0   $ 14.9   
                                               

For the Year Ended December 31, 2009

  Flag
Intermediate
Holdings
Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Net sales

  $ —        $ —        $ 1,091.1      $ 7.6      $ —        $ 1,098.7   

Operating costs and expenses:

           

Cost of sales (exclusive of operating and delivery, and depreciation and amortization shown below)

    —          —          884.6        5.5        —          890.1   

Operating and delivery

    —          0.6        125.5        0.6        —          126.7   

Selling, general and administrative

    —          3.9        80.8        0.4        —          85.1   

Depreciation and amortization

    —          1.7        16.8        0.4        —          18.9   
                                               

Operating income (loss)

    —          (6.2     (16.6     0.7        —          (22.1

Other (income) expense:

           

Interest expense

    —          44.8        0.1        —          —          44.9   

Intercompany charges

    —          (54.9     54.3        0.6        —          —     

Equity in earnings of subsidiaries

    35.7        71.2        —          —          (106.9     —     

Gain on extinguishment of debt

    —          (13.6     —          —          —          (13.6

Other (income) expense, net

    —          —          0.2        0.1        —          0.3   
                                               

Loss before income taxes

    (35.7     (53.7     (71.2     —          106.9        (53.7

Benefit for income taxes

    —          (18.0     —          —          —          (18.0
                                               

Net loss

  $ (35.7   $ (35.7   $ (71.2   $ —        $ 106.9      $ (35.7
                                               

 

81


Table of Contents
Index to Financial Statements

For the Year Ended December 31, 2008

  Flag
Intermediate
Holdings
Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Net sales

  $ —        $ —        $ 2,150.1      $ 6.1      $ —        $ 2,156.2   

Operating costs and expenses:

           

Cost of sales (exclusive of operating and delivery, and depreciation and amortization shown below)

    —          —          1,608.2        4.7        —          1,612.9   

Operating and delivery

    —          0.1        185.1        0.9        —          186.1   

Selling, general and administrative

    —          4.4        121.1        0.7        —          126.2   

Depreciation and amortization

    —          4.3        16.5        0.5        —          21.3   

(Gain) on sale of property and equipment

    —          —          (2.4     —          —          (2.4

Impairment of assets

    —          5.1        —          —          —          5.1   
                                               

Operating income

    —          (13.9     221.6        (0.7     —          207.0   

Other (income) expense:

           

Interest expense

    —          54.1        0.4        —          —          54.5   

Intercompany charges

    —          (103.8     102.8        1.0        —          —     

Equity in earnings of subsidiaries

    (93.4     (116.9     —          —          210.3        —     

Other (income) expense, net

    —          —          (0.3     0.1        —          (0.2
                                               

Income (loss) before income taxes

    93.4        152.7        118.7        (1.8     (210.3     152.7   

Provision for income taxes

    —          59.3        —          —          —          59.3   
                                               

Net income (loss)

  $ 93.4      $ 93.4      $ 118.7      $ (1.8   $ (210.3   $ 93.4   
                                               

 

82


Table of Contents
Index to Financial Statements

For the Year Ended December 31, 2010

  Flag
Intermediate
Holdings
Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Cash flows from operating activities:

           

Net income (loss)

  $ 14.9      $ 14.9      $ 36.1      $ (1.0   $ (50.0   $ 14.9   

Adjustments to reconcile net income (loss) to cash provided by (used in) operating activities:

           

Loss on sale of property and equipment

    —          —          0.3        —          —          0.3   

Equity in earnings of subsidiaries

    (14.9     (35.1     —          —          50.0        —     

Provision for bad debts

    —          —          2.4        —          —          2.4   

Depreciation and amortization

    —          1.2        18.2        0.4        —          19.8   

Excess tax benefit from stock-based compensation

    —          (0.1     —          —          —          (0.1

Amortization of debt issuance costs

    —          4.0        —          —          —          4.0   

Deferred income taxes

    —          1.6        —          —          —          1.6   

Stock-based compensation

    —          1.2        —          —          —          1.2   

Advisory agreement termination charge

    —          3.3        —          —          —          3.3   

Changes in operating assets and liabilities:

           

Accounts receivable

    0.5        (0.3     (31.8     0.6        10.5        (20.5

Inventories

    —          —          (63.9     (0.1     —          (64.0

Prepaid expenses and other

    —          0.8        (3.7     (0.1     —          (3.0

Accounts payable and accrued liabilities

    —          15.2        3.8        —          (10.5     8.5   

Other operating, net

    —          (1.0     2.2        0.2        —          1.4   
                                               

Net cash provided by (used in) operating activities

    0.5        5.7        (36.4     —          —          (30.2
                                               

Cash flows from investing activities:

           

Sale of assets

    —          —          0.7        —          —          0.7   

Purchase of assets

    —          (1.0     (3.0     —          —          (4.0

Acquisition costs, net of cash acquired

    —          —          (28.0     —          —          (28.0
                                               

Net cash used in investing activities

    —          (1.0     (30.3     —          —          (31.3
                                               

Cash flows from financing activities:

           

Borrowings on the ABL facility

    —          99.5        —          —          —          99.5   

Repayments on the ABL facility

    —          (68.5     —          —          —          (68.5

Repayments of long-term debt

    —          —          (0.1     —          —          (0.1

Deferred financing costs and other

    —          (6.8     —          —          —          (6.8

Excess tax benefits from stock-based compensation

    —          0.1        —          —          —          0.1   

Net change in intercompany balances

    (0.5     (21.0     68.2        0.3        —          47.0   
                                               

Net cash provided by (used in) financing activities

    (0.5     3.3        68.1        0.3        —          71.2   
                                               

Net increase in cash

    —          8.0        1.4        0.3        —          9.7   

Cash, beginning of period

    —          4.5        0.6        0.4        —          5.5   
                                               

Cash, end of period

  $ —        $ 12.5      $ 2.0      $ 0.7      $ —        $ 15.2   
                                               

 

83


Table of Contents
Index to Financial Statements

For the Year Ended December 31, 2009

  Flag
Intermediate
Holdings
Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Cash flows from operating activities:

           

Net income (loss)

  $ (35.7   $ (35.7   $ (71.2   $ —        $ 106.9      $ (35.7

Adjustments to reconcile net income to cash provided by operating activities:

           

Equity in earnings of subsidiaries

    35.7        71.2        —          —          (106.9     —     

Provision for bad debts

    —          —          2.9        —          —          2.9   

Depreciation and amortization

    —          1.7        19.1        0.4        —          21.2   

Gain on extinguishment of debt

    —          (13.6     —          —          —          (13.6

Amortization of debt issuance costs

    —          3.5        —          —          —          3.5   

Deferred income taxes

    —          4.2        —          —          —          4.2   

Stock-based compensation

    —          0.4        —          —          —          0.4   

Changes in operating assets and liabilities:

           

Accounts receivable

    (0.5     1.0        71.0        0.4        (10.3     61.6   

Inventories

    —          —          206.8        (0.2     —          206.6   

Prepaid expenses and other

    —          0.8        (0.8     —          —          —     

Accounts payable and accrued liabilities

    —          (20.5     4.8        0.1        10.3        (5.3

Other operating, net

    —          3.2        (0.4     0.3        —          3.1   
                                               

Net cash provided by (used in) operating activities

    (0.5     16.2        232.2        1.0        —          248.9   
                                               

Cash flows from investing activities:

           

Sale of assets

    —          —          0.5        —          —          0.5   

Purchase of assets

    —          (0.3     (3.8     —          —          (4.1

Acquisition costs, net of cash acquired

    —          —          (4.2     —          —          (4.2
                                               

Net cash used in investing activities

    —          (0.3     (7.5     —          —          (7.8
                                               

Cash flows from financing activities:

           

Borrowings on the ABL facility

    —          119.0        —          —          —          119.0   

Repayments on the ABL facility

    —          (412.0     —          —          —          (412.0

Repayments of long-term debt

    —          (34.1     (1.5     —          —          (35.6

Net change in intercompany balances

    0.5        223.2        (222.9     (0.8     —          —     
                                               

Net cash provided by (used in) financing activities

    0.5        (103.9     (224.4     (0.8     —          (328.6
                                               

Net (decrease) increase in cash

    —          (88.0     0.3        0.2        —          (87.5

Cash, beginning of period

    —          92.5        0.3        0.2        —          93.0   
                                               

Cash, end of period

  $ —        $ 4.5      $ 0.6      $ 0.4      $ —        $ 5.5   
                                               

 

84


Table of Contents
Index to Financial Statements

For the Year Ended December 31, 2008

  Flag
Intermediate
Holdings
Corp.
    Metals
USA, Inc.
    Guarantor
Subsidiaries
    Non-Guarantor
Subsidiaries
    Adjustments
&
Eliminations
    Consolidated  

Cash flows from operating activities:

           

Net income

  $ 93.4      $ 93.4      $ 118.7      $ (1.8   $ (210.3   $ 93.4   

Adjustments to reconcile net income to cash provided by operating activities:

           

(Gain) loss on sale of property and equipment

    —          —          (2.4     —          —          (2.4

Impairment of property and equipment

    —          5.1        —          —          —          5.1   

Equity in earnings of subsidiaries

    (93.4     (116.9     —          —          210.3        —     

Provision for bad debts

    —          —          3.1        —          —          3.1   

Depreciation and amortization

    —          4.3        18.8        0.5        —          23.6   

Amortization of debt issuance costs

    —          3.2        —          —          —          3.2   

Deferred income taxes

    —          (3.1     —          —          —          (3.1

Stock-based compensation

    —          1.1        —          —          —          1.1   

Dividends received

    87.5        —          —          —          (87.5     —     

Changes in operating assets and liabilities:

           

Accounts receivable

    0.1        5.9        (4.1     (1.0     —          0.9   

Inventories

    —          —          (13.2     0.4        —          (12.8

Prepaid expenses and other

    —          0.3        0.1        —          —          0.4   

Accounts payable and accrued liabilities

    (0.1     7.3        (35.8     (0.1     —          (28.7

Other operating, net

    —          7.5        —          0.7        —          8.2   
                                               

Net cash provided by (used in) operating activities

    87.5        8.1        85.2        (1.3     (87.5     92.0   
                                               

Cash flows from investing activities:

           

Sale of assets

    —          —          9.5        —          —          9.5   

Purchase of assets

    —          —          (12.2     —          —          (12.2

Port City Metal Services contingent earn-out

    —          (5.0     —          —          —          (5.0
                                               

Net cash provided by (used in) investing activities

    —          (5.0     (2.7     —          —          (7.7
                                               

Cash flows from financing activities:

           

Borrowings on the ABL facility

    —          1,056.0        —          —          —          1,056.0   

Repayments on the ABL facility

    —          (968.5     —          —          —          (968.5

Repayments of long-term debt

    —          —          (2.4     —          —          (2.4

Deferred financing costs

    —          (2.5     —          —          —          (2.5

Net change in intercompany balances

    —          81.2        (82.5     1.3        —          —     

Dividends paid

    (87.5     (87.5     —          —          87.5        (87.5
                                               

Net cash provided by (used in) financing activities

    (87.5     78.7        (84.9     1.3        87.5        (4.9
                                               

Net increase (decrease) in cash

    —          81.8        (2.4     —          —          79.4   

Cash, beginning of period

    —          10.7        2.7        0.2        —          13.6   
                                               

Cash, end of period

  $ —        $ 92.5      $ 0.3      $ 0.2      $ —        $ 93.0   
                                               

 

85


Table of Contents
Index to Financial Statements

19. Subsequent Event

On March 11, 2011, we acquired 100% of the outstanding common shares of The Richardson Trident Company (“Trident”). Trident is a general line metal service center with fabricating capabilities designed to service the oil and gas industry, and is also a wholesale distributor of metals, plastics and electronic parts. The Company operates under The Trident Company and The Altair Company trade names. Trident’s principal facility is in Richardson, Texas with branch locations in Houston, Austin, El Paso, Harlingen and Odessa, Texas; Tulsa, Oklahoma; Olathe, Kansas; Los Angeles, California; Boston, Massachusetts and Thomasville, Georgia. The purchase price for Trident was $92.6, which included $54.2 for the repayment of Trident debt at closing and $1.8 in the form of a note payable. The purchase was funded with borrowings under the ABL facility.

Trident provides a broad range of metals and processing services with a product mix that emphasizes aluminum, stainless steel and nickel. The majority of Trident’s customer base operates in the oil and gas services sector. Processing services include precision sawing, boring, honing, slitting, sheeting, shearing and tuning. Trident also offers supply chain solutions such as just-in-time delivery and value-added components required by original equipment manufacturers. As a result of the acquisition, we expect to expand our position as a leading integrated metals processor and distributor in additional markets, as well as enhance our non-ferrous and value-added processing product and service offerings.

 

86


Table of Contents
Index to Financial Statements
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

 

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

As of December 31, 2010, an evaluation was carried out under the supervision and with the participation of our management, including the President and Chief Executive Officer and the Chief Financial Officer, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, the CEO and CFO have concluded that our disclosure controls and procedures are effective to ensure that the information required to be disclosed in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.

Changes in Internal Control over Financial Reporting

We maintain a system of internal accounting controls that are designed to provide reasonable assurance that our books and records accurately reflect the transactions of the Company and that our policies and procedures are followed. There have been no changes in our internal controls during the fourth quarter that have materially affected, or are reasonably likely to materially affect such controls since the most recent evaluation of these controls as reported in our Form 10-Q for the period ended September 30, 2010, including any corrective actions with regard to significant deficiencies or material weaknesses in our internal controls.

 

Item 9B. Other Information

None.

 

87


Table of Contents
Index to Financial Statements

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

Omitted under the reduced disclosure format pursuant to General Instruction I (2) (c) of Form 10-K.

 

Item 11. Executive Compensation

Omitted under the reduced disclosure format pursuant to General Instruction I (2) (c) of Form 10-K.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters

Omitted under the reduced disclosure format pursuant to General Instruction I (2) (c) of Form 10-K.

 

Item 13. Certain Relationships and Related Transactions and Director Independence

Omitted under the reduced disclosure format pursuant to General Instruction I (2) (c) of Form 10-K.

 

Item 14. Principal Accounting Fees and Services

The following table sets forth the aggregate fees billed to the Company for professional services provided in 2010 and 2009 by Deloitte & Touche LLP (“D&T”), the Company’s independent registered public accounting firm and principal accounting firm:

 

     For the Fiscal Years Ended
December 31,
 
     2010      2009  

Audit Fees(1)

   $ 1,237,200       $ 1,158,000   

Audit Related Fees(2)

     138,000         275,080   

Tax Fees(3)

     174,144         139,335   

All Other Fees

     —           —     
                 

Total

   $ 1,549,344       $ 1,572,415   
                 

 

(1) Consists of professional services rendered for the audit of the annual financial statements of the Company and for the review of the quarterly financial statements of the Company.
(2) Consists of fees for accounting and financial reporting consultations in connection with offering memorandumcs, registration statements, acquisitions, and management’s assessment of internal control over financial reporting.
(3) Consists of fees for tax planning and tax compliance services, including assistance in connection with tax audits and tax advice related to acquisitions.

The Audit Committee has considered whether the non-audit services provided to the Company by D&T impaired the independence of D&T and concluded that they did not.

All of D&T’s fees for 2010 and 2009 were pre-approved by the Audit Committee through formal engagement letters. The Audit Committee’s or the Board’s, as applicable, policy is to pre-approve all services by the Company’s independent accountants. The Audit Committee has adopted a pre-approval policy that provides guidelines for the audit, audit-related, tax and other non-audit services that may be provided by D&T to the Company. The policy (a) identifies the guiding principles that must be considered by the Audit Committee in approving services to ensure that D&T’s independence is not impaired; (b) describes the audit, audit-related, tax and other services that may be provided and the non-audit services that are prohibited; and (c) sets forth pre-approval requirements for all permitted services. Under the policy, all services to be provided by D&T must be pre-approved by the Audit Committee.

 

88


Table of Contents
Index to Financial Statements

PART IV

 

Item 15. Exhibits, Financial Statement Schedules

 

(a) (1) Financial Statements:

 

     Page  

Report of Independent Registered Public Accounting Firm

     50   

Consolidated Balance Sheets

     51   

Consolidated Statements of Operations

     52   

Consolidated Statements of Stockholder’s Equity and Comprehensive Income (Loss)

     53   

Consolidated Statements of Cash Flows

     54   

Notes to Consolidated Financial Statements

     55   

 

(2) Financial Statement Schedules:

All other schedules have been omitted since the required information is not significant or is included in the Consolidated Financial Statements or Notes thereto or is not applicable.

 

(b) Exhibits

Reference is made to the Index of Exhibits immediately preceding the exhibits hereto (beginning on page 92), which index is incorporated herein by reference.

 

89


Table of Contents
Index to Financial Statements

SIGNATURES

Pursuant to the requirements of Section 13 or 15 (d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on March 16, 2011.

 

FLAG INTERMEDIATE HOLDINGS CORPORATION
By:   / s/    C. LOURENCO GONCALVES        
  C. Lourenco Goncalves,
 

Chairman of the Board,

Chief Executive Officer and President

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on March 16, 2011.

 

Signature

  

Title

/s/    C. LOURENCO GONCALVES        

C. Lourenco Goncalves

  

Chairman of the Board,

Chief Executive Officer and President

(Principal Executive Officer)

/s/    M. ALI RASHID        

M. Ali Rashid

   Director

/s/    ERIC L. PRESS        

Eric L. Press

   Director

/s/    MATTHEW R. MICHELINI        

Matthew R. Michelini

   Director

/s/    JOHN T. BALDWIN        

John T. Baldwin

   Director

/s/    MARK A. SLAVEN        

Mark A. Slaven

   Director

/s/    LARRY K. POWERS        

Larry K. Powers

   Director

/s/    ROBERT C. MCPHERSON, III        

Robert C. McPherson, III

   Senior Vice President and Chief Financial Officer (Principal Financial Officer)

/s/    DANIEL L. HENNEKE        

Daniel L. Henneke

   Vice President and Controller
(Principal Accounting Officer)

 

90


Table of Contents
Index to Financial Statements

SIGNATURES

Pursuant to the requirements of Section 13 or 15 (d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on March 16, 2011.

 

Metals USA, Inc.
By:   / s/    C. LOURENCO GONCALVES        
  C. Lourenco Goncalves,
 

Chairman of the Board,

Chief Executive Officer and President

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on March 16, 2011.

 

Signature

  

Title

/s/    C. LOURENCO GONCALVES        

C. Lourenco Goncalves

  

Chairman of the Board,

Chief Executive Officer and President

(Principal Executive Officer)

/s/    M. ALI RASHID        

M. Ali Rashid

   Director

/s/    ERIC L. PRESS        

Eric L. Press

   Director

/s/    MATTHEW R. MICHELINI        

Matthew R. Michelini

   Director

/s/    JOHN T. BALDWIN        

John T. Baldwin

   Director

/s/    MARK A. SLAVEN        

Mark A. Slaven

   Director

/s/    LARRY K. POWERS        

Larry K. Powers

   Director

/s/    ROBERT C. MCPHERSON, III        

Robert C. McPherson, III

   Senior Vice President and Chief Financial Officer (Principal Financial Officer)

/s/    DANIEL L. HENNEKE        

Daniel L. Henneke

   Vice President and Controller
(Principal Accounting Officer)

 

91


Table of Contents
Index to Financial Statements

INDEX OF EXHIBITS

 

Exhibit
Number

 

Description

  2.1*   Agreement and Plan of Merger dated May 18, 2005 between Metals USA, Inc., Flag Acquisition Corporation and Metals USA Holdings Corporation
  3.1*   Amended and Restated Certificate of Incorporation of Metals USA, Inc. dated November 30, 2005
  3.2*   Amended and Restated Bylaws of Metals USA, Inc. as amended by Amendment No. 1 effective as of May 17, 2004
  3.4*   Certificate of Incorporation of Flag Intermediate Holdings Corporation
  3.5*   Bylaws of Flag Intermediate Holdings Corporation
  4.1*   Form of Common Stock Certificate of Flag Intermediate Holdings Corporation
  4.2*   Indenture, dated November 30, 2005, by and among Metals USA, Inc. (formerly Flag Acquisition Corporation), Flag Intermediate Holdings Corporation, the Subsidiary Guarantors and Wells Fargo Bank, N.A., as trustee and Notes Collateral Agent
  4.3   Form of 11 1/8% Senior Secured Note due 2015 (included in Exhibit 4.2)
  4.4*   Registration Rights Agreement, dated as of November 30, 2005, by and among Metals USA, Inc. (formerly Flag Acquisition Corporation), Flag Intermediate Holdings Corporation and Credit Suisse First Boston, L.L.C., as representative of the Initial Purchasers
  4.5*   Supplemental Indenture dated as of November 30, 2005, among Metals USA, Inc., Flag Intermediate Holdings Corporation, the Subsidiary Guarantors and Wells Fargo Bank, N.A., as Trustee and Notes Collateral Agent
  4.6**   Second Supplemental Indenture, dated as of March 30, 2006, among MUSA Newark, LLC, Metals USA, Inc., Flag Intermediate Holdings Corporation and Wells Fargo Bank, N.A., as Trustee and Notes Collateral Agent
  4.7+   Third Supplemental Indenture, dated as of June 20, 2006, among Metals USA International Holdings, Inc., Flag Intermediate Holdings Corporation and Wells Fargo Bank, N.A., as Trustee and Notes Collateral Agent
10.1   Employment Agreement, dated September 13, 2010, between Metals USA Holdings Corp. and C. Lourenço Gonçalves (filed as Exhibit 10.1 to Metals USA Holdings Corp.’s Form 8-K filed on September 16, 2010)
10.2*^   Employment Agreement, dated September 29, 2005, between Metals USA, Inc. and Robert C. McPherson, III
10.3*^   Severance Agreement, dated September 29, 2005, between Metals USA, Inc. and Roger Krohn
10.4*^   Severance Agreement, dated September 29, 2005, between Metals USA, Inc. and David Martens
10.5**   Management Agreement, dated as of November 30, 2005, between Metals USA, Inc., Metals USA Holdings Corporation and Apollo Management V, L.P.
10.7@^   Management Deferred Compensation Plan
10.8*   Amended and Restated Loan and Security Agreement, dated as of December 17, 2010, among each of the Lenders party thereto, Bank of America, N.A., as the Administrative Agent and the Collateral Agent, Flag Intermediate Holdings Corporation, Metals USA, Inc. (formerly Flag Acquisition Corporation) and certain Subsidiaries of Metals USA, Inc. party thereto

 

92


Table of Contents
Index to Financial Statements

Exhibit
Number

  

Description

10.9    2010 Long Term Incentive Plan (filed as Exhibit 10.23 to Metals USA Holdings Corp.’s Form S-1/A filed on March 19, 2010)
10.10#    Amended and Restated Investors Rights Agreement, dated as of April 13, 2010, between Metals USA Holdings Corp. and Apollo Management V, L.P. and its Affiliates.
12.1#    Computation of Ratio of Earnings to Fixed Charges
18.1#    Preferability letter dated March 16, 2011 from Independent Registered Public Accounting Firm
21.1#    List of Subsidiaries of the Company
31.1#    Certification of the Chief Executive Officer of Flag Intermediate Holdings Corporation, dated March 16, 2011, pursuant to Rule 13a-14(a) or 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2#    Certification of the Chief Financial Officer of Flag Intermediate Holdings Corporation, dated March 16, 2011, pursuant to Rule 13a-14(a) or 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.3#    Certification of the Chief Executive Officer of Metals USA, Inc., dated March 16, 2011, pursuant to Rule 13a-14(a) or 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.4#    Certification of the Chief Financial Officer of Metals USA, Inc., dated March 16, 2011, pursuant to Rule 13a-14(a) or 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1#    Certification of the Chief Executive Officer of Flag Intermediate Holdings Corporation, dated March 16, 2011, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2#    Certification of the Chief Financial Officer of Flag Intermediate Holdings Corporation, dated March 16, 2011, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.3#    Certification of the Chief Executive Officer of Metals USA, Inc., dated March 16, 2011, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.4#    Certification of the Chief Financial Officer of Metals USA, Inc., dated March 16, 2011, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

* incorporated by reference to the exhibits to Metal USA Inc.’s, Flag Intermediate Corporation’s and the Subsidiary Guarantors’ Registration Statement on Form S-4 filed March 31, 2006
** incorporated by reference to the exhibits to Metal USA Inc.’s, Flag Intermediate Corporation’s and the Subsidiary Guarantors’ Registration Statement on Form S-4 filed March 31, 2006, as amended by Amendment No. 1 on May 26, 2006
+ incorporated by reference to the exhibits to Metals USA, Inc.’s, Flag Intermediate Corporation’s and the Subsidiary Guarantors’ Registration Statement on Form S-4 filed March 31, 2006, as amended by Amendment No. 3 on August 2, 2006
@ incorporated by reference to Exhibit 10.11 to Flag Intermediate Holdings Corporation’s Annual Report for the year ended December 31, 2006 on Form 10-K filed March 12, 2007
< incorporated by reference to Exhibit 4.1 to Flag Intermediate Holdings Corporation’s Quarterly Report for the period ended June 30, 2007 on Form 10-Q filed August 6, 2007
# filed herewith
^ management contract or compensatory plan or arrangement

 

93