Attached files

file filename
EX-32.1 - SECTION 1350 CERTIFICATIONS - HUTCHINSON TECHNOLOGY INCdex321.htm
EX-23.1 - CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM - HUTCHINSON TECHNOLOGY INCdex231.htm
EX-31.1 - CERTIFICATION OF CHIEF EXECUTIVE OFFICER - HUTCHINSON TECHNOLOGY INCdex311.htm
EX-24.1 - POWER OF ATTORNEY - HUTCHINSON TECHNOLOGY INCdex241.htm
EX-21.1 - LIST OF SUBSIDIARIES - HUTCHINSON TECHNOLOGY INCdex211.htm
EX-10.12 - SEVERANCE PAY PLAN - HUTCHINSON TECHNOLOGY INCdex1012.htm
EX-31.2 - CERTIFICATION OF CHIEF FINANCIAL OFFICER - HUTCHINSON TECHNOLOGY INCdex312.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

(Mark One)

  x Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the Fiscal Year Ended September 26, 2010

or

  ¨ Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the Transition Period From                      to                     .

Commission file number 0-34838

 

 

Hutchinson Technology Incorporated

(Exact name of registrant as specified in its charter)

 

                    Minnesota                                             41-0901840                     
(State or other jurisdiction of    (I.R.S. employer identification no.)
incorporation or organization)   
40 West Highland Park Drive NE   
          Hutchinson, Minnesota                                       55350                          
(Address of principal executive offices)    (Zip code)
                        (320) 587-3797                        
(Registrant’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:  

Common Stock, par value $.01 per share

Common Share Purchase Rights

Name of exchange on which registered:   NASDAQ Global Select Market
Securities registered pursuant to Section 12(g) of the Act:   None

Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act of 1933.    Yes  ¨    No  x

Indicate by check mark whether the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company (as defined in Rule 12b-2 of the Exchange Act).

 

    Large Accelerated Filer    ¨   Accelerated Filer    x   Non-accelerated Filer    ¨   Smaller Reporting Company    ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

The aggregate market value of the common stock held by non-affiliates of the registrant as of March 28, 2010, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $76,650,000, based on the closing sale price for the registrant’s common stock on that date. For purposes of determining this number, all officers and directors of the registrant are considered to be affiliates of the registrant. This number is provided only for the purpose of this report on Form 10-K and does not represent an admission by either the registrant or any such person as to the status of such person.

As of December 1, 2010, the registrant had 23,371,105 shares of common stock issued and outstanding.


Documents Incorporated By Reference

Portions of our Proxy Statement for the annual meeting of shareholders to be held January 20, 2011, are incorporated by reference in Part III.

Forward-Looking Statements

Statements contained in this Annual Report on Form 10-K that are not statements of historical fact should be considered forward-looking statements within the meaning of the safe harbor provisions of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Forward-looking statements include, but are not limited to, statements regarding the following: the demand for and shipments of the company’s products, production capacity, capabilities and costs, assembly operations in Thailand, product commercialization and adoption, capital expenditures, average selling prices, product costs, operating performance, technology, development, inventory levels, division and company-wide financial performance, cost reductions and economic and market conditions. Words such as “believe,” “anticipate,” “expect,” “intend,” “estimate,” “approximate,” “plan,” “goal” and similar expressions are intended to identify forward-looking statements but are not the exclusive means of identifying such statements. Although we believe these statements are reasonable, forward-looking statements involve risks and uncertainties that may cause actual results to differ materially from those projected by such statements. Factors that could cause actual results to differ from those discussed in the forward-looking statements include, but are not limited to, those discussed under the heading “Risk Factors” beginning on page 8. This list of factors is not exhaustive, however, and these or other factors, many of which are outside of our control, could have a material adverse effect on us and our results of operations. Therefore, you should consider these risk factors with caution and form your own critical and independent conclusions about the likely effect of these risk factors on our future performance. Forward-looking statements speak only as of the date on which the statements are made, and we undertake no obligation to update any forward-looking statement for any reason, even if new information becomes available or other events occur in the future. You should carefully review the disclosures and the risk factors described in this and other documents we file from time to time with the Securities and Exchange Commission (the “SEC”), including our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K. All forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by the cautionary statements set forth herein.


PART I

HUTCHINSON TECHNOLOGY INCORPORATED AND SUBSIDIARIES

 

Item 1. Business

When we refer to “we,” “our,” “us,” the “company” or “HTI,” we mean Hutchinson Technology Incorporated and its subsidiaries. Unless otherwise indicated, references to “2011” mean our fiscal year ending September 25, 2011, references to “2010” mean our fiscal year ended September 26, 2010, references to “2009” mean our fiscal year ended September 27, 2009, references to “2008” mean our fiscal year ended September 28, 2008, and references to “2007” mean our fiscal year ended September 30, 2007.

OVERVIEW

We are a global technology manufacturer committed to creating value by developing solutions to critical customer problems. Our culture of quality, continuous improvement, superior innovation and a relentless focus on the fundamentals enables us to compete in the markets we serve. We incorporated in Minnesota in 1965.

Our Disk Drive Components Division is a key worldwide supplier of suspension assemblies for hard disk drives. Suspension assemblies are precise electro-mechanical components that hold a disk drive’s read/write head at microscopic distances above the drive’s disks. Our innovative product solutions help customers improve yields, increase reliability and enhance disk drive performance, thereby increasing the value they derive from our products.

Our BioMeasurement Division is focused on bringing new technologies and products to the market that provide information clinicians can use to improve the quality of health care and reduce costs. Late in calendar 2006, we began selling the InSpectra® StO2 System for perfusion status monitoring. This noninvasive device provides a continuous, real-time and direct measurement of tissue oxygen saturation (StO2), an indicator of perfusion status. By helping clinicians instantly detect changes in a patient’s perfusion status, the InSpectra StO2 System helps clinicians reduce risks and costs by enabling faster and more precise assessment of oxygen delivery to vital organs and tissue in critical care settings.

DISK DRIVE COMPONENTS DIVISION

Our Disk Drive Components Division manufactures suspension assemblies for all sizes and types of hard disk drives. Suspension assemblies are critical components of disk drives that hold the read/write heads in position above the spinning magnetic disks. We developed our position as a key supplier of suspension assemblies through an integrated manufacturing approach, research, development and design activities coupled with substantial investments in process capabilities, product features and manufacturing capacity. We manufacture our suspension assemblies with proprietary technology and processes with very low part-to-part variation. These processes require manufacturing to precise specifications that are critical to maintaining the necessary microscopic clearance between the head and disk and the electrical connectivity between the head and the drive circuitry.

We design our suspension assemblies with a focus on the increasing performance requirements of new disk drives, principally more complex, increased data density, improved head to disk stability during a physical shock event and reduced data access time. Increased capacity, improved reliability and performance, as well as the miniaturization of disk drives, generally require suspension assemblies with lower variability, specialized design, expanded functionality and greater precision. We will continue to invest, as needed, to advance suspension assembly technology, enhance our process capabilities and expand our production capacity. During 2010, we shipped 512 million suspension assemblies of all types, supplying all manufacturers of disk drives and head-gimbal assemblers.

World-wide demand for disk drives and suspension assemblies weakened significantly in the first half of 2009. Our net sales have decreased significantly in recent years due to the weakened world-wide demand, together with market share losses due to changes in supply chain alignment by our customers. For example, in 2008 and 2007, we experienced significant market share loss for our suspension assemblies used in the desktop segment and in 2009 our customer Seagate significantly reduced its procurement of our suspension assemblies. As the disk drive industry has matured and consolidated, cost competitiveness has become an important factor to our customers which has required us to lower our pricing to retain business. Our average selling prices have decreased from $0.80 in the first half of 2008 to $0.66 in the fourth quarter of 2010. In 2010, we also encountered difficulties in ramping up our TSA+ process, including product defects, yield declines and capacity constraints, some of which resulted in lost shipments in that period.

While the overall market for suspension assemblies grew in 2010, our shipments of suspension assemblies declined 7% from 2009 due to further market share losses. In addition, a defect on some of our TSA+ product resulted in lost volume in the third and fourth quarters of 2010. While it will take longer than we previously expected to regain market share, we believe investments in our TSA+ process capabilities and our Thailand assembly operation will further lower our costs and strengthen our competitive position.

In the long-term, we believe that end user demand for storage capacity will continue to increase as evolving consumer electronics and computing applications continue to require storage devices with increased capacity and functionality, which will increase disk drive demand and, therefore, suspension assembly demand.

 

1


We believe that our vertically integrated model in our Disk Drive Components Division provides the best means to meet customers’ requirements and achieve lowest manufacturing cost. As our TSA+ suspension assembly volumes increase, and as our TSA+ flexure yields and process efficiencies continue to improve, we expect to eliminate the cost burden associated with TSA+ flexure production. Our return to positive cash generation and profitability includes increasing revenue through overall suspension assembly market growth and higher market share, improving our TSA+ production efficiency and ramping our assembly operations in Thailand.

Products

We categorize our current products as either suspension assemblies or other revenue, which consists primarily of reimbursement for engineering services and specific program capacity.

The following table shows, for each of 2010, 2009 and 2008, the relative contribution to net sales, in millions of dollars and percentages, of each product category:

 

     2010     2009     2008  
     Amount      %     Amount      %     Amount      %  

Suspension assemblies

   $ 338.0         98   $ 398.0         98   $ 622.0         99

Other revenue

     6.8         2        8.3         2        8.6         1   
                                                   

Total Disk Drive Components Division net sales

   $ 344.8         100   $ 406.3         100   $ 630.6         100
                                                   

See Note 11 to the consolidated financial statements contained in Item 15 for financial information with respect to our business segments and a distribution of revenue and long-lived assets by geographic area for each of 2010, 2009 and 2008. See also Eleven-Year Selected Financial Data.

Suspension Assemblies. During 2010, we shipped 512 million suspension assemblies, compared to 553 million and 790 million in 2009 and 2008, respectively. We shipped TSA and TSA+ suspension assemblies, as well as suspensions using purchased additive flexures, to our customers. We produce suspension assemblies using our “additive” and our “subtractive” manufacturing processes. Our TSA+ suspensions are the plan of record on multiple customer programs. We shipped 116 million TSA+ suspension assemblies during 2010, up from 43 million in 2009 and six million in 2008. For 2011, we expect TSA+ suspension assemblies to account for a steadily increasing proportion of our shipments, growing from approximately a third of shipments in the fourth quarter of 2010 to half of our shipments by mid-2011 and two-thirds of our shipments by the end of 2011. We believe the industry will fully transition to additive suspensions over the next two to four years. We are also purchasing additive flexures to fill other customer requirements.

We have the capability to produce multiple variations of suspension assemblies. This capability permits us to assist customers’ design efforts and meet the varied and changing requirements of specific customers. We have developed significant proprietary capabilities in the design and production of suspension assemblies for both current and new generations of higher performance disk drives and read/write heads. The continual pursuit of increased data density and lower storage costs is leading to suspension assemblies with flexures that have finer electrical conductors, greater lead counts and increased complexity such as interleaved or stacked traces, and to the adoption of value-added features for suspension assemblies, such as formed and polished headlifts, larger dampers with through hole features and a variety of limiter configurations. We are actively involved with several of our customers on dual stage actuation (DSA) designs and are shipping prototypes of DSA suspensions to four of the five hard disk drive OEMs, and we have received very positive feedback regarding the performance of our DSA suspensions in their tests. The timing and volume of our customers’ DSA programs are subject to, among other things, the economics of existing and future technical alternatives that may also meet their disk drive requirements.

Our selling prices are subject to market pressure from our competitors and pricing pressure from our customers. Disk drive manufacturers seek low cost designs and suspension assembly pricing is highly competitive. Our selling prices also are affected by changes in overall demand for our products, changes in the specific products our customers buy and a product’s life cycle. A typical life cycle for our products begins with higher pricing when products are introduced and decreasing prices as they mature. To offset price decreases during a product’s life, we rely primarily on higher sales volume and improving our manufacturing yields and efficiencies to reduce our cost. If we cannot increase our sales volume or reduce our manufacturing costs as prices decline during our products’ life cycles, our business, financial condition and results of operations could be materially adversely affected.

Other Revenue. In 2008, a small portion of our revenue was due to our manufacturing and sales to competitive suspension assembly manufacturers of etched and stamped component parts, such as flexures and baseplates, for certain suspension programs reaching the end of their market lives. These component sales provided minimal revenue and ended in 2009. We also enter into arrangements with customers that provide us with reimbursement for engineering services and specific program capacity to partially offset the costs of our investment. We recognize the associated revenue over the estimated life of the program to which the services and capacity relate.

To derive additional value from the unique expertise and capabilities in metrology, tool design, tool build and precision component manufacturing that we have developed in our Disk Drive Components Division, we are offering these capabilities to targeted companies in several industries. We secured some initial business in 2009, and our effort generated a modest contribution to net sales in 2010. We will continue to pursue targeted opportunities in this area.

 

2


Manufacturing

Our manufacturing strategy focuses on reliably producing suspension assemblies in high volume with the consistent precision and features required by our customers. We have developed advanced proprietary process, inspection and measurement systems and controls, and related automated production equipment. We have adopted an integrated manufacturing approach that closely couples design, tooling and manufacturing, which has facilitated the development, implementation and high-volume production of new suspension assembly products. We believe that our integrated approach and dedicated development capability give us a competitive advantage in quickly supplying suspension assembly prototypes, ramping volume manufacturing and responding to short-term shifts in market demand.

New manufacturing processes for advanced suspension assembly features and suspension assembly types, such as those currently used for manufacturing our TSA+ flexures, initially have lower manufacturing yields than those for more mature products and processes. Manufacturing yields generally improve as the process and product mature and production volumes increase. Manufacturing yields also vary depending on the complexity and uniqueness of products. Small variations in manufacturing yields can have a significant impact on gross profits.

Our products require several manufacturing processes, each dependent on different technical disciplines, to ensure the high degree of precision and the process control necessary to meet strict customer requirements. We also have developed additive processing to produce flexures for current and future generations of suspension assemblies that meet the increasingly tighter performance specifications of our customers. Additive processing involves depositing thin metal layers onto a polyimide surface in the shape of the desired circuitry and then imaging and plating up metal layers to form the suspension’s electrical conductors. The manufacturing processes we employ include photoetching, stamping, chemical deburring, automated optical inspection, plasma etching, plating, precision forming, laser welding, metal deposition and ultrasonic cleaning.

We completed construction of our Thailand assembly facility on time and are now shipping product from the Thailand site for customer qualification. Suspension assembly components produced in our domestic manufacturing facilities will be utilized in our Thailand assembly operation. Excess automated production equipment from our domestic sites is being installed in our Thailand assembly facility and we are replicating our automated high-volume manufacturing processes. We anticipate that the Thailand assembly operation will improve our ability to serve our customers’ operations in Asia and enable us to reduce our costs.

Our critical raw material needs are available through multiple sources of supply, with the following exceptions. Certain types of stainless steel, polyimide and photoresists are currently single-sourced because the raw materials provided by these sources meet our strict specifications. To protect against the adverse effect of a short-term supply disruption, we maintain several weeks’ supply of these materials. Similarly, we obtain certain customized equipment and related repair parts from single sources because of the specialization of the equipment and the quality of these supply sources. In light of current uncertain market and economic conditions and the effect they may have on our suppliers, we continue to look for options that may reduce our risk of supply disruption.

Our production processes require the storage, use and disposal of a variety of chemicals that are considered hazardous under applicable federal and state laws. Accordingly, we are subject to a variety of regulatory requirements for the handling of such materials. We do not anticipate any material effect on our capital expenditures, earnings or competitive position due to compliance with government regulations involving environmental matters.

Research and Development

The disk drive industry is subject to rapid technological change, and our ability to remain competitive depends on, among other things, our ability to anticipate and respond to changes and to continue our close working relationships with the engineering staffs of our customers. Our research and development efforts are directed at continuing to develop suspension assembly capabilities and features that enable our products to meet performance criteria desired by our customers for specific drive applications. Measurement, process development and process control are critical to improving capability related to static attitude, gram force, resonance and windage, all performance characteristics important to suspension assemblies. We are actively involved with several of our customers on DSA designs and prototypes.

We have devoted and will continue to devote substantial resources to research and development efforts. Our research and development expenses for the Disk Drive Components Division were approximately $16,396,000, $22,511,000 and $34,944,000, in 2010, 2009 and 2008, respectively. The reduction in research and development expenses from 2008 to 2010 was primarily related to lower labor expenses due to reduced headcount as a result of our TSA+ flexure development efforts transitioning to high-volume manufacturing and our 2009 restructuring and cost reduction actions.

The transition to smaller disk drives, the development of more complex next-generation read/write heads, continuing improvement in data density and the use of disk drives in consumer electronics applications necessitate the further miniaturization of suspension assemblies. We have and will continue to implement alternative technologies, as needed, which we believe will be required for manufacturing future generations of our products.

 

3


Customers and Marketing

Our disk drive products are sold principally through our account management team operating primarily from our headquarters in Hutchinson, Minnesota. Through subsidiaries, we have managers, technical representatives and quality coordinators in Asia. We sell our suspension assemblies to original equipment manufacturers for use in their products and to subassemblers who sell to original equipment manufacturers. Our account management team is organized by individual customer, and contacts are typically initiated with both the customer’s purchasing agents and its engineers. Our engineers and account management team together actively participate in the selling process and in maintaining customer relationships.

We have established “vendor managed inventory,” or VMI, facilities near the major production centers of certain individual customers to assure that we meet the customers’ inventory requirements. Certain agreements with our customers provide that we maintain minimum finished goods inventory levels. During 2010, a significant majority of our suspension assembly shipments were distributed to our customers in Thailand, Hong Kong and the Philippines through our VMI facilities. We also have established a service center in Thailand that provides product logistics support, technical support and measurement services. We intend to transfer the service center activities to our new Thailand assembly facility during 2011.

We are a supplier to all manufacturers of disk drives and head-gimbal assemblers. The following table shows our five largest customers for 2010 as a percentage of net sales.

 

Customer

   Percentage of
Net Sales
 

Western Digital Corporation

     43

SAE Magnetics, Ltd/TDK Corporation

     37

Seagate Technology, LLC

     10

Hitachi and affiliates

     8

Toshiba Corporation

     1

Sales to our five largest customers constituted 99% of net sales for 2010, 2009 and 2008. Significant portions of our revenue may be indirectly attributable to large manufacturers of disk drives, such as Toshiba and Western Digital, which may purchase read/write head assemblies from read/write head manufacturers that utilize our suspension assemblies and suspension assembly components. The disk drive industry has consolidated significantly in recent years. For example, in October 2009, Toshiba Corporation completed its acquisition of the hard disk drive business of Fujitsu Limited of Japan and in September 2007, TDK Corporation acquired the recording head business of our customer Alps Electric Co., Ltd. We expect to continue to depend upon a limited number of customers for our sales, given the relatively small number of disk drive manufacturers and head-gimbal assemblers. Our results of operations could be adversely affected by reduced demand from our major customers.

Backlog

We generally make our sales pursuant to purchase orders rather than long-term contracts. Our backlog of purchase orders was approximately $20,100,000 at September 26, 2010, as compared to $43,800,000 at September 27, 2009. This year-over-year reduction was due to a decrease in demand for our suspension assemblies during 2010. In addition, one customer provided its purchase order requirements for the first quarter of 2011 after September 26, 2010. Our purchase orders may be changed or cancelled by customers on short notice. In addition, we believe that it is a common practice for disk drive manufacturers to place orders in excess of their needs during growth periods. Accordingly, we do not believe that backlog should be considered indicative of sales for any future period.

Seasonality

Historically, the disk drive industry has experienced seasonal demand, with higher levels of demand in the second half of the calendar year driven, we believe, by consumer spending in the winter holiday season. In addition, corporate information technology budget calendars often provide for more spending during the second half of the calendar year. Seasonal demand for our suspension assemblies generally tracks that of the disk drive industry and may also be delayed or accelerated by existing inventory levels in the supply chain.

Competition

We believe that the principal factors of competition in the suspension assembly market include price, reliability of volume supply, time to market, product performance, quality and customer service. Disk drive manufacturers seek low cost designs and as the disk drive industry has matured and consolidated, cost competitiveness, and thus suspension assembly pricing, has become an increasingly important factor to our customers. Our customers’ operating results also depend on being the first-to-market and first-to-volume with new products at a low cost. Our development efforts have typically enabled us to shorten development cycles and achieve reliable high-volume output per manufacturing unit quickly.

 

4


Our principal competitors for suspension assemblies are Nihon Hatsujo Kabusikigaisha (“NHK”), Magnecomp Precision Technology Public Company Limited (“MPT”), a subsidiary of TDK Corporation, and NAT Peripheral (H.K.) Co., Ltd., (a joint venture of NHK and SAE Magnetics, Ltd./TDK Corporation). The NAT Peripheral joint venture has provided our customer, SAE Magnetics, Ltd./TDK Corporation, the capability to produce suspension assemblies since calendar 2005. We believe that consolidation in the disk drive industry, including the affiliation between our competitor MPT and our customer SAE Magnetics, Ltd., has resulted in shifts in certain industry supply chain alignments that have impacted our competitive position. Our principal competitors in producing suspension flexures are Nitto Denko Corporation and Dai Nippon Corporation. Although we cannot be sure that the number of competitors will not increase in the future or that users of suspension assemblies will not develop internal capabilities to manufacture suspension assemblies or suspension assembly components, we believe that the number of entities that have the technical capability and capacity for producing precision suspension assemblies or components in large volumes will remain small.

We continually monitor technological developments in and potential threats to the disk drive storage market and we believe disk drives will remain the primary data storage technology for the foreseeable future. However, other types of data storage technology, such as solid state storage or flash (semiconductor) memory, may become competitive with certain disk drive applications, and thereby negatively affect the demand for our products. As an example, emerging applications requiring digital storage, particularly consumer electronics products that require lower storage capacity, are using flash memory instead of disk drives, which has and may continue to limit growth opportunities for disk drive-based data storage.

BIOMEASUREMENT DIVISION

We established the BioMeasurement Division in 1996 with the objective of leveraging our culture of quality, engineering capabilities and leading-edge measurement technology in the medical market. We applied our engineering and manufacturing expertise to develop a device that noninvasively provides information about tissue perfusion, critical information needed in the resuscitation of trauma and critical care patients experiencing shock. Our first device, the InSpectra Tissue Spectrometer, was introduced in 2002 and was used primarily for research. Late in calendar 2006, we launched a second-generation product for clinical use, the InSpectra StO2 System, which we are currently selling to the trauma, critical care and emergency medicine areas of hospitals. We believe understanding tissue perfusion with the use of the InSpectra StO2 System is of key importance in the monitoring of patients as they are transferred through the various departments in a hospital.

Over the course of 2010, we added 40 new customers and grew the installed base of monitors to 344 across 138 customers, up from 222 monitors across 98 customers at the end of 2009. While the pace of customer acceptance and adoption was slower than we had hoped in 2010, we were able to broaden the installed base in the face of hospital spending constraints. The division’s net sales in 2011 are currently expected to range from $3,000,000 to $5,000,000 compared with $2,400,000 in 2010. These expectations for 2011 net sales are contingent upon growing market acceptance of our existing and new products and upon hospital spending levels, which have been constrained by industry economic conditions.

In light of slower than expected sales growth based on the current pace of adoption of the InSpectra StO2 System and spending constraints in health care markets world-wide, we announced in 2010 a plan to reduce costs by $12,000,000 on an annualized basis and make certain operating changes in our BioMeasurement Division. The cost reductions were more than 75% completed at the end 2010 and will substantially reduce the division’s operating loss in 2011.

Products

We designed the InSpectra StO2 System for use in trauma, critical care and emergency medicine settings where there is a need to directly monitor the compromised tissue perfusion associated with hemorrhagic and other forms of shock. The system consists of the InSpectra StO2 Tissue Oxygenation Monitor and the InSpectra StO2 Sensor. The InSpectra StO2 System has received United States Food and Drug Administration (“FDA”) 510k clearance and CE Mark registration in the European Union. The device provides an absolute measure of StO2, which quantifies the ratio of oxygenated hemoglobin to total hemoglobin in the microcirculation of skeletal or peripheral muscle. This measurement helps clinicians assess and detect changes in the patient’s overall perfusion status, enabling them to make better treatment decisions and reduce costs in critical care settings.

The InSpectra StO2 System uses near infrared spectroscopy to noninvasively provide a continuous, real-time and direct measurement of StO2 in muscle tissue. The InSpectra StO2 Tissue Oxygenation Monitor is configured for use with the single-use sensor, which is applied to the thenar eminence (the muscle at the base of the thumb on the palm side of the hand). The thenar eminence has proven to be the most reliable site for obtaining tissue perfusion readings. It provides consistent results among patients, with minimal influence from factors such as adipose tissue, edema and differences in tissue densities.

During the first quarter of 2011, we are launching a new product, the InSpectra StO2 Spot Check in Europe and other regions that recognize the CE Mark and filing for marketing clearance in the United States, under the FDA’s premarket notification or 510(k) process. To broaden the use of StO2 monitoring — and to have it incorporated into the continuum of patient care from diagnosis through treatment to discharge — it must be easy and inexpensive for clinicians to get a StO2 measurement in a wide variety of settings. The InSpectra StO2 Spot Check addresses these needs. The Spot Check is a handheld device that enables clinicians to quickly and cost effectively identify at-

 

5


risk patients, who can then be continuously monitored with our InSpectra StO2 Tissue Oxygenation Monitor. The Spot Check features a reusable sensor that enables clinicians to obtain a StO2 measurement at a low cost-per-patient, and its portability makes it easy to use in a wide range of settings. These attributes should help foster the use of StO2 monitoring from emergency transport to the emergency department and on through treatment, the ICU and ultimately, patient discharge.

There are currently no other clinical methods for directly determining oxygen saturation in the microcirculation of muscle tissue. Blood chemistry tests indicate systemic oxygenation levels and require blood samples, making them invasive and intermittent. In contrast, the InSpectra StO2 System noninvasively provides a direct, real-time and continuous regional tissue oxygen reading. Pulse oximeters give clinicians an indication of arterial oxygenation, but the measurement they provide of SpO2 represents oxygen saturation of blood before it enters the tissue region where oxygen is significantly consumed. The InSpectra StO2 Tissue Oxygenation Monitor measures microcirculation, where oxygen exchange predominantly occurs; unlike arterial oxygenation, StO2 will vary as the flow and consumption of oxygen changes within the measurement tissue. Transcutaneous PO2 measures the partial pressure of oxygen in the skin and only permits an inference of whether tissue is being oxygenated based on what is being emitted by the skin. Our device measures oxygen saturation in the microcirculation of muscle tissue below the sensor to produce an accurate StO2 reading.

Manufacturing

We manufacture and assemble all of our BioMeasurement Division products in our Hutchinson, Minnesota manufacturing facility, using components and subassemblies obtained from outside suppliers. Our quality management system complies with the FDA’s Quality System Regulation, ISO 13485:2003, an international standard for quality management systems for medical devices, and with the European Medical Device Directive 93/42 EEC.

Research and Development

We have conducted, and continue to conduct, clinical studies to demonstrate the effectiveness and value of our technology for patients who are in or may be about to go into shock, as well as for other clinical applications. We also devote research and engineering resources to ongoing product development focusing on the application of near infrared technologies to detect and monitor tissue perfusion. For 2010, 2009 and 2008, research and development expenses for the BioMeasurement Division were approximately $5,033,000, $4,265,000 and $4,767,000, respectively.

We utilize advisory physicians with expertise in critical care medicine in the United States and Europe to ensure that the technology and solutions we develop address real and unanswered medical needs. For the last several years, we have focused on studies involving shock. We have conducted a key multi-site trial and several investigator-initiated studies, most of which have been pilot studies. In September 2006, we announced the results of the multi-site StO2 Trauma Study that was conducted by seven Level I trauma centers that enrolled 383 trauma patients. It was initiated in 2004 to identify the role StO2 monitoring with our device could play in monitoring the inadequate tissue perfusion associated with hemorrhagic shock. The study was designed to determine whether StO2 measurements on the thenar eminence are an indicator of hypoperfusion (inadequate blood flow and oxygenation). Data from the study show that StO2 measured noninvasively on the thenar eminence is a statistically significant indicator of hypoperfusion in hemorrhagic shock patients and functions as well as base deficit and lactate measures, with the added benefits of being continuous, real-time and noninvasive. The results of the StO2 Trauma Study were published in the January 2007 Journal of Trauma. In addition, there have been more than 300 publications or presentations that documented the value of StO2 as an indicator of hypoperfusion in multiple shock states.

Marketing, Sales and Distribution

We have focused our marketing efforts on educating critical care and emergency medicine clinicians on the value of StO2 in monitoring patients. We have also participated in key trauma, critical care and emergency medicine conferences and sponsored educational forums.

We estimate the world-wide market for StO2 monitoring could be a multi-billion dollar annual opportunity in the future. Our customers include major medical centers primarily in the United States and Europe. We plan to expand our sales efforts to additional hospitals in the United States and Europe, as well as to other departments at existing customers. We continue to sell our device using a direct sales force dedicated to the BioMeasurement Division and through the use of distributors in selected countries. We are positioned to sell into 26 countries through a combination of direct sales and distributors.

We offer customers flexible technology acquisition programs that include direct purchase, rental and a sensor purchase program where, in exchange for a monitor supplied by us at no charge, the sale price of the sensors is increased.

Competition

The InSpectra StO2 System is currently the only noninvasive tissue oxygenation monitor designed for the trauma, critical care and emergency medicine settings. Covidien plc, Nonin Medical and CAS Medical Systems, Inc. each produce devices that use near infrared spectroscopy to monitor levels of cerebral oxygen. ViOptix, Inc. produces a device that uses near infrared spectroscopy to monitor tissue oxygenation that is focused on reconstructive surgery applications. Covidien plc also has a product to monitor changes in regional blood oxygen saturation in both cerebral and somatic tissue. In addition, other companies may have the ability to develop tissue perfusion

 

6


monitors that use near infrared spectroscopy and that may in the future compete with the InSpectra StO2 System. It is possible that any of these companies, or others, may develop and market a product similar to the InSpectra StO2 System for use in trauma, emergency medicine and other critical care markets.

We also face competition from alternative clinical methodologies. If clinicians do not incorporate StO2 into their decision making and instead continue to rely on indirect indications of tissue perfusion provided by blood tests, indwelling catheters and vital sign parameters, for instance, we may have difficulties selling our product.

GENERAL

Foreign Sales

Sales to foreign-based enterprises for both divisions totaled $157,611,000, $182,417,000 and $263,346,000 for 2010, 2009 and 2008, respectively. Sales to foreign subsidiaries of United States corporations totaled $182,474,000, $217,900,000 and $360,843,000 for 2010, 2009 and 2008, respectively. The majority of these sales were to the Pacific Rim region. In addition, we have significant sales to United States corporations that use our products in their offshore manufacturing sites.

Intellectual Property

We regard much of the equipment, processes, information and knowledge that we generate and use in the manufacture of our products as proprietary and protectable under applicable trade secret, copyright, trademark and unfair competition laws. In addition, if we develop manufacturing equipment, products and processes for making disk drive products where patents might enhance our position, we have pursued, and we will continue to pursue, patents in the United States and in other countries covering our disk drive products. We have United States and foreign patents issued and pending on the technology employed by the InSpectra StO2 System. We also have obtained certain trademarks for our products to distinguish them from our competitors’ products.

As of September 26, 2010, we held 211 United States patents and 31 foreign patents, and we had 44 patent applications pending in the United States and 17 patent applications pending in other countries covering both our Disk Drive Components Division and our BioMeasurement Division. Internally, we protect intellectual property and trade secrets through physical security measures at our facilities, as well as through non-disclosure and non-competition agreements with all employees and confidentiality policies and non-disclosure agreements with consultants, strategic suppliers and customers.

In connection with our disk drive industry business, we have entered into licensing and cross-licensing agreements relating to certain of our patents and patent applications allowing some of our competitors to produce products similar to ours in return for royalty payments and/or cross license rights. The agreements include cross-licenses to certain existing and future suspension assembly technology.

From time to time, third parties in the disk drive industry have asserted patents against us or our customers that may relate to certain of our manufacturing equipment or products or to products that include our products as a component. Some of our competitors have experience with, and have developed patent portfolios relating to, technology associated with our TSA+ product. We also have litigated claims against a competitive supplier in the disk drive industry alleging infringement of our patents. In addition, some of our disk drive industry customers have been sued on patents having claims closely related to products we sell. We expect that, as the number of patents issued continues to increase, the volume of intellectual property claims could increase.

Employees

As of September 26, 2010, we had 2,546 employees.

Available Information

Our website is: http://www.htch.com. We make available, free of charge, through our website materials we file with or furnish to the SEC pursuant to Section 13(a) of the Exchange Act, including our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K and amendments to those reports. These materials are posted on our website as soon as reasonably practicable after we electronically file them with or furnish them to the SEC.

Members of the public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 450 Fifth Street, NW, Washington, DC 20549. Information on the operation of the Public Reference Room is available by calling the SEC at 1-800-SEC-0330. The SEC maintains a website that contains reports, proxy and information statements and other information about us and other issuers that file electronically at http://www.sec.gov.

 

7


 

Item 1A. Risk Factors

GENERAL

We may not be able to generate enough cash or secure enough capital to service our existing debt obligations or execute our current and future business plans.

In the first half of 2009, we experienced significant reductions in demand for and shipments of our suspension assemblies due primarily to lower demand for disk drives, lower disk drive production as the drive makers reduced inventories and a loss of market share. In addition, in 2009 our customer Seagate significantly reduced its procurement of our suspension assemblies. The change in this major customer’s procurement plan reduced our overall market share. While the overall market for suspension assemblies has grown in 2010, our shipments of suspension assemblies declined 7% from 2009 due to further market share losses. Our operating results have been adversely affected by this decrease in demand. Our manufacturing capacity may continue to be underutilized in the future, which will negatively impact our operating results. Despite our workforce reductions and restructuring actions in 2009 and 2010, both our Disk Drive Components and BioMeasurement divisions continue to incur operating losses.

We continue to have significant liquidity needs. Our unfavorable operating results in 2009 led to uncertainty regarding our ability to satisfy the covenants in a credit facility, which we therefore terminated in the third quarter of 2009. Furthermore, holders of $197,500,000 par value of our 3.25% Convertible Subordinated Notes due 2026 (the “3.25% Notes”) currently outstanding may require us to purchase all or a portion of their 3.25% Notes for cash as early as January 15, 2013. We anticipate that we would need to obtain additional financing if the holders of our 3.25% Notes require us to purchase all or a portion of their 3.25% Notes for cash on that date.

A further deterioration in our business or further disruption in the global credit and financial markets and related continuing adverse economic conditions would impact our ability to obtain new financing. We may not be able to obtain new financing on terms acceptable to us, including covenants that we will be able to comply with in the short-term. Although we believe that we will be able to meet the current portion of our debt obligations and execute our current business plan, there can be no assurance that we will have access to additional financing, if and when needed in the future. If cash flow from operations together with cash and cash equivalents are not sufficient to fund operations, capital expenditures and debt obligations, and we are unable to secure alternative sources of financing, our results of operations, financial condition and liquidity would be materially adversely affected.

Current and future disruptions in the global credit and financial markets could limit our access to credit, which could negatively impact our business.

Domestic and foreign credit and financial markets have experienced extreme disruption in the past two years, including volatility in security prices, diminished liquidity and credit availability, declining valuations of certain investments and significant changes in the capital and organizational structures of certain financial institutions. We are unable to predict the likely duration and severity of the continuing disruption in the credit and financial markets or of any related adverse economic conditions. Given these conditions, we may not be able to secure additional financing for future activities on satisfactory terms, or at all, which could materially adversely affect our results of operations, financial condition and liquidity.

We terminated a credit facility in the third quarter of 2009. Deterioration in our business or further disruptions in the global credit and financial markets could result in further reductions in our access to credit, which could materially adversely affect our results of operations, financial condition and liquidity.

Current and future disruptions in the global credit and financial markets also could adversely affect our customers and suppliers. Our customers and their customers may experience difficulty obtaining financing for significant purchases and operations. A resulting decrease in orders could decrease the overall demand for our products. It is also possible that our customers could demand adjustments in pricing terms or postpone or cancel existing orders as a result of limited credit availability. Furthermore, we maintain significant balances due from customers and limitations on the credit available to our customers could impair our ability to collect those receivables on a timely basis. If our suppliers, of either raw materials or equipment, experience similar credit restrictions, they may become unable to meet our ongoing supply demands or tighten the terms of our purchases. Disruptions in the global credit markets that adversely affect our customers and suppliers could materially adversely affect our results of operations, financial condition and liquidity.

We will need a significant amount of funds over the next several years to achieve our long-term growth objectives and to meet our debt obligations.

Our business will require significant funds over the next several years. We would likely use these funds for capital expenditures, research and development, debt service and working capital. Our Disk Drive Components Division is highly capital intensive. Our total capital expenditures for both of our divisions were $31,382,000 in 2010, $20,609,000 in 2009 and $65,603,000 in 2008. We currently anticipate spending $20,000,000 to $25,000,000 on capital expenditures during 2011. In addition, our total research and development expenses for both of our divisions were approximately $21,429,000, or 6% of net sales, in 2010. Our 2010 Disk Drive Components Division capital expenditures and research and development expenses were primarily for additional TSA+ flexure production capacity, establishing our Thailand assembly operation and new program tooling.

 

8


Our capital expenditures for the Disk Drive Components Division are planned based on process improvements to be incorporated in our manufacturing operations and the rate at which our customers adopt new generations of higher performance disk drives and next-generation read/write technology and head sizes, which may require new or improved process technologies, such as additive processing to produce flexures for our TSA+ suspensions or DSA suspensions, anticipated customer demand for our suspension assembly products and market demand for disk drives. Capital spending is also based on our ability to fund capital expenditures, as needed, with cash generated from operations, our current cash, cash equivalents, short-term investments or additional financing, if available given current capital market conditions.

As of September 26, 2010, we had outstanding $197,500,000 par value of our 3.25% Notes. Holders of our 3.25% Notes may require us to purchase all or a portion of their 3.25% Notes for cash as early as January 15, 2013. We may pursue additional debt or equity financing or other forms of financing to supplement our current capital resources, if needed, in 2011 and beyond. Our ability to obtain additional financing will depend upon a number of factors, including our future performance and financial results and general economic and capital market conditions. We may not be able to maintain adequate capital or raise additional capital on reasonable terms or at all, if needed.

The following factors could affect our ability to obtain additional financing on favorable terms, or at all:

 

   

our results of operations;

 

   

general economic and capital market conditions and conditions in the disk drive industry;

 

   

our financial condition;

 

   

our ratio of debt to equity;

 

   

the perception in the capital markets of our business;

 

   

our business prospects; and

 

   

changes in interest rates.

Our ability to execute our long-term strategy may depend on our ability to obtain additional long-term debt and equity capital. We have no commitments for additional borrowings or for sales of equity, other than under our existing employee benefit plans. We cannot determine the precise amount and timing of our funding needs at this time. We may be unable to obtain additional financing on terms acceptable to us or at all. We also may need to refinance our indebtedness at maturity. We may not be able to obtain additional capital on favorable terms to refinance our indebtedness. An inability to refinance our indebtedness, if needed, could materially adversely affect our results of operations, financial condition and liquidity.

Significant changes in the market price of our common stock could result in securities litigation claims against us.

Significant price and value fluctuations have occurred with respect to the publicly-traded securities of technology companies generally. The price of our common stock has changed significantly and is likely to remain depressed. In the past, securities litigation claims have been filed against certain companies following a period of decline in the market price of their publicly-traded securities. We may be the target of similar securities litigation claims in the future. Risks associated with litigation often are difficult to assess or quantify and their existence and magnitude can remain unknown for significant periods of time. Although we maintain director and officer insurance, the amount of insurance coverage may not be sufficient to cover a claim and the continued availability of this insurance cannot be assured. Future litigation, if any, may result in substantial costs and divert management’s attention and resources, which could materially adversely affect our results of operations, financial condition and liquidity.

Our ability to use our deferred tax assets is subject to certain annual limitations, and may be further limited by a “change of control.”

At September 26, 2010, our deferred tax assets included $30,674,000 of unused tax credits, of which $3,468,000 can be carried forward indefinitely and $27,206,000 expire at various dates beginning in 2018. In addition, at September 26, 2010, our deferred tax assets also included $121,269,000 of net operating loss (“NOL”) carryforwards that will begin to expire in 2021 if not otherwise used by us. As of September 26, 2010, we had an estimated NOL carryforward of approximately $334,362,000 for United States federal tax return purposes. A valuation allowance of $168,991,000 has been recognized to offset the related deferred tax assets due to the uncertainty of realizing the deferred tax assets before they expire. Both our unused tax credits and our estimated NOL carryforwards may be used to offset taxable income, if any, generated by us in future years. Our ability to use these deferred tax assets is subject to an annual limitation imposed by certain change of control provisions under Section 382 of the Internal Revenue Code that may be triggered by an aggregate change in the beneficial ownership of our common stock. If we do not generate sufficient profits or the annual limitation under Section 382 is triggered, some or all of our deferred tax assets may expire or we may not be able to use them to offset taxes due in the applicable period.

 

9


We may not be able to adequately protect our intellectual property.

We attempt to protect our intellectual property rights through copyrights, patents, trademarks, trade secrets and other measures. We may not, however, be able to obtain rights to protect our technology. In addition, competitors may be able to develop similar technology independently. Our ability to remain competitive in the disk drive industry depends in large part on trade secrets relating to our proprietary manufacturing processes. Our BioMeasurement Division is engaged in a market where third parties have significant existing patent portfolios. We seek to protect trade secrets and our other proprietary technology in part by requiring each of our employees to enter into non-disclosure, assignment and non-competition agreements. In these agreements, the employee agrees to maintain the confidentiality of all of our proprietary information and, subject to certain exceptions, to assign to us all rights in any proprietary information or technology made or contributed by the employee during his or her employment. In addition, we regularly enter into non-disclosure agreements with third parties, such as consultants, strategic suppliers and customers. These agreements may, however, be breached, and we may not have an adequate remedy for any such breach. In addition, our competitors may otherwise learn or independently develop our trade secrets.

We believe that the patents we hold and may obtain are valuable, but that they will not independently determine our success. Moreover, we may not receive patents for our pending patent applications, and our issued patents may not be broad enough to protect our technology adequately. Our future technology may not be protected, and any patent issued to us may be challenged, invalidated, circumvented or infringed. In addition, we have only limited patent rights outside the United States, and the laws of certain foreign countries may not protect our intellectual property rights to the same extent as do the laws of the United States.

In the past, in connection with our disk drive industry business, we have entered into licensing and cross-licensing agreements relating to certain of our patents and patent applications allowing some of our competitors to produce products similar to ours in return for royalty payments and/or cross-license rights. The agreements also include cross-licenses to certain existing and future suspension assembly technology.

We and certain users of our disk drive industry products have received, and may receive, communications from third parties asserting patents against us or our customers that may relate to certain of our manufacturing equipment or to our products or to products that include our products as a component. Some of our competitors have experience with, and have developed patent portfolios relating to, technology associated with our TSA+ product. In addition, we and certain of our disk drive industry customers have been sued on patents having claims closely related to disk drive industry products we sell. If any third party makes a valid infringement claim against us and we are unable to obtain a license on terms acceptable to us, our business, financial condition and results of operations could be adversely affected. We expect that, as the number of patents issued in connection with our disk drive industry business continues to increase, the volume of intellectual property claims made against us could increase. We may need to engage in litigation to:

 

   

enforce patents issued or licensed to us;

 

   

protect trade secrets or know-how owned by us; or

 

   

determine the enforceability, scope and validity of the intellectual property rights of others.

In the past, we have litigated claims against a competitive disk drive industry supplier alleging infringement of our patents. We could incur substantial costs in other such litigation or other similar legal actions, which could have a material adverse effect on our business, financial condition and results of operations.

In addition, frequent and extensive litigation and administrative proceedings over patent and other intellectual property rights are hallmarks of the medical technology industry, and this litigation is expensive, complex and lengthy, and its outcome is difficult to predict. Medical technology patent litigation may result in significant royalty or other payments or injunctions that may prevent the sale of our product and significantly divert the attention of our BioMeasurement Division technical and management personnel. We cannot be certain that we will successfully defend our patents from infringement or claims of invalidity or unenforceability, or that we will successfully defend against allegations of infringement of third-party patents.

Our business could be adversely impacted if we have deficiencies in our disclosure controls and procedures or internal control over financial reporting.

Our management is required to provide our shareholders a report on our internal controls over financial reporting including an assessment of the effectiveness of these controls to provide reasonable assurance a material misstatement did not occur in our financial statements. While our management continues to review the effectiveness of our disclosure controls and procedures and internal control over financial reporting, we cannot assure you that our disclosure controls and procedures or internal control over financial reporting will be effective in accomplishing all control objectives all of the time. Deficiencies may occur in the future. Such deficiencies, particularly a material weakness in internal control over financial reporting, could adversely affect our financial results, the market price of our common stock and our reputation.

 

10


DISK DRIVE COMPONENTS DIVISION

Our sales are concentrated in a small customer base.

Although we supply all manufacturers of disk drives and head-gimbal assemblers, sales to our five largest customers constituted 99% of net sales in 2010, 2009 and 2008. Over the years, the disk drive industry has experienced numerous consolidations. In May 2009 for example, Toshiba Corporation acquired the hard disk drive business of Fujitsu Limited of Japan. In calendar 2007, TDK Corporation acquired the recording head business of our customer Alps Electric Co., Ltd. and approximately 90% of MPT’s outstanding common shares. As TDK Corporation now controls MPT, a competitive suspension assembly supplier, our customer SAE Magnetics, Ltd. (which is owned by TDK Corporation), is affiliated with a competitive supplier of suspension assemblies. We believe that consolidation in the disk drive industry, including the affiliation between our competitor MPT and our customer SAE Magnetics, Ltd., has resulted in shifts in certain industry supply chain alignments that have impacted our competitive position. The failure by any one of our customers to pay its account balance with us could have a material adverse effect on our results of operations.

The following factors could adversely impact our market share:

 

   

change in supply chain alignment by a customer, as in 2008 and 2007 when we experienced market share loss for our suspensions used in desktop disk drives;

 

   

loss of one or more of our major customers as in 2009 when our customer Seagate significantly reduced its procurement of our suspension assemblies;

 

   

development by any one customer to have the capability to produce suspension assemblies in high volume for its own products;

 

   

loss of market share by one of our major customers; and

 

   

change in the type of suspension assembly or flexures used in suspension assemblies, such as our TSA+ flexure, used by a customer.

Any reduction in our market share could have a material adverse effect on our results of operations.

Almost all of our sales depend on the disk drive industry, which is cyclical, subject to ongoing technological innovation and subject to intense price competition.

Sales of suspension assemblies and suspension assembly components accounted for 99% of our net sales in 2010, 2009 and 2008. The disk drive industry is intensely competitive and technology changes rapidly, such as during past industry transitions to smaller disks or higher density read/write heads. The industry’s demand for disk drive components also fluctuates. The disk drive industry experiences periods of increased demand and rapid growth followed by periods of oversupply and subsequent contraction. These cycles may affect suppliers to this industry because we believe that it is a common practice for disk drive manufacturers to place orders for disk drive components in excess of their needs during growth periods, and sharply reduce orders for these components during periods of contraction. In addition, there is continuous downward price pressure on disk drive manufacturers and their suppliers. If price reductions exceed our ability to reduce costs, our operating results could be negatively affected.

Industry transitions in head technology and data density improvements impact demand for suspension assemblies. During past industry transitions production yields of head and disk drive manufacturers initially were reduced. Because a significant portion of head yield reduction occurs after the head is bonded onto the suspension assembly, low yields at our customers often result in increased demand for suspension assemblies. When our customers improve their production yields, overall demand for our products may be negatively impacted. Our results of operations could be materially adversely affected if a reduction in the industry’s component demand continues long-term or a future significant slowdown in the industry occurs.

We may not be able to manufacture our products efficiently due to changes in product mix or technology, or other unforeseen events.

We manufacture a wide variety of suspension assemblies with different selling prices and manufacturing costs. Disk drive makers continue to expand their product lines to include drives offering performance characteristics optimized for specific applications, which has resulted in a proliferation of individual disk drive programs. We cannot produce certain low-volume disk drive programs as efficiently as we produce high-volume programs. Our product mix varies as market demand changes. Any substantial variation in product mix can lead to changes in utilization of our equipment and tooling, inventory obsolescence and overstaffing in certain areas, all of which could adversely impact our business, financial condition and results of operations.

Manufacturing yields, efficiencies and processing operations vary from product to product. Newer products often require new or additional manufacturing process steps and typically have lower initial manufacturing yields and efficiencies as we ramp up manufacturing. As a result, new products are frequently more expensive to produce and may not be profitable. We are using new manufacturing processes to produce TSA+ suspension assemblies, which have caused us to experience inefficiencies and lower yields in 2008, 2009 and 2010 that will continue until we achieve further improvements in process efficiencies. We have experienced missed shipments and increased sales returns in the past as we ramp up manufacturing of new products, or as new features for our products are introduced, or as new manufacturing processes are implemented. In 2010, a defect in some of our TSA+ product resulted in decreased shipments. The

 

11


measures we took to isolate and contain the product defect also reduced our yield, limited our output and increased our costs. We may in the future experience additional process issues that impact our ability to meet customer demand and cause us to incur higher costs. We also may in the future experience missed shipments or increased sales returns. In addition, we may be required to reimburse customers for product costs relating to the incorporation of defective suspension assemblies into our customers’ products. We may not attain our output goals and be profitable with regard to any of our suspension assembly products.

We may need to transfer production of certain suspension assemblies from one domestic manufacturing site to another, and as assembly operations begin at our Thailand plant, we expect to transfer production to another country. In the past, transfers between our domestic manufacturing sites have lowered initial yields and/or manufacturing efficiencies. This results in higher manufacturing costs. Our manufacturing plants located in Minnesota and Wisconsin can experience severe weather. Severe weather has, at times, resulted in lower production and decreased our shipments.

Our ability to conduct business would be impaired if our workforce were to be unionized or if a significant number of our specialized employees were to leave and we could not replace them with comparable personnel. The locations of our plants and the broad span and technological complexity of our products and processes may limit the number of satisfactory engineering and other candidates for key positions. Our business may be adversely affected if we need to adjust the size of our workforce due to fluctuating demand. We significantly reduced our workforce from 4,591 at the end of 2008 to 2,448 at the end of 2009 and further restructured our business in 2010. These recent workforce reductions may impact our ability to recruit and retain employees, and we are uncertain if we will be able to adequately staff our operations if we need to increase our manufacturing capacity in the future.

A slowdown in demand for computer systems and consumer electronics may cause a decline in demand for suspension assemblies.

Our suspension assemblies are components in computers and a variety of consumer electronics products. The demand for these products can be volatile. In a weak economy, consumer spending tends to decline and retail demand for computers and other consumer electronics tends to decrease, as does business demand for computer systems. Demand for suspension assemblies therefore may be adversely impacted as a result of a weaker economy. During 2009, demand for suspension assemblies weakened significantly, which resulted in shipments of our suspension assemblies declining 30% from 2008. In addition, in the past, unexpected slowdowns in demand for computer systems and consumer electronics have caused sharp declines in demand for suspension assemblies, resulting in periods during which the supply of suspension assemblies exceeded demand. If in the future an unexpected slowdown in demand for suspension assemblies occurs or if demand decreases as a result of a weakening economy, our results of operations will be materially adversely affected as a result of lower revenue and gross profits.

We may not be able to utilize our capacity efficiently or accurately plan our capacity requirements, which may negatively affect our operating results.

We increase our production capacity and the overhead that supports production based on anticipated market demand. Market demand, however, has not always developed as expected or remained at a consistent level. The underutilization that can result decreases our profitability. For example, in 2008 and 2007, we experienced significant market share loss for our suspension assemblies used in the desktop segment, in 2009 our customer Seagate significantly reduced its procurement of our suspension assemblies, and in 2010 demand for our suspension assemblies remains constrained. This resulted in underutilization of our manufacturing capacity. As a result, our profitability also was below our expectations.

A deterioration of our business could result in further underutilization of our manufacturing capacity and we may need to impair certain assets in the future. In 2009, we recorded non-cash impairment charges of $71,809,000 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations. This impairment included the closure of our Sioux Falls, South Dakota facility at the end of June 2009.

The following factors complicate accurate capacity planning for market demand:

 

   

changes in the demand for and mix of specific products our customers buy and the features they require;

 

   

our ability to add and train staff to operate our production equipment in advance of demand;

 

   

the market’s pace of technological change;

 

   

variability in our manufacturing yields and productivity; and

 

   

long lead times for most of our plant and equipment expenditures, requiring major financial commitments well in advance of actual production requirements.

Our inability to plan our capacity requirements accurately and efficiently utilize our production capacity, or our failure to put in place the technologies and capacity necessary to meet market demand, could adversely affect our business, financial condition and results of operations.

 

12


Our investment in developing new process capabilities to produce suspension assemblies could result in significant increases in our operating expenses and may result in a product that is not acceptable to our customers.

Rapid technological change in the disk drive industry, as well as the expanding use of disk drives in a growing range of consumer electronics applications, has led to numerous suspension assembly design changes and tighter performance specifications. To maintain our position in the disk drive industry, we need to develop new process capabilities to achieve the ever increasing performance requirements of our customers. Also, if processes change, we may need to replace, modify or design, build and install equipment. These changes may require additional capital expenditures and increased development and support expenses, which may adversely impact our operating results.

We expect to continue to have significant research and development expenses for the following new products:

 

   

suspension assemblies that incorporate flexures produced using additive processing;

 

   

suspension assemblies with tighter performance specifications than our customers currently require;

 

   

suspension assemblies that require additional or smaller electrical conductors;

 

   

suspension assemblies that incorporate new materials, such as thinner laminates and piezoelectric actuators used in DSA suspension assemblies, which are more difficult to handle in the manufacturing process; and

 

   

suspension assemblies for use with more complex read/write heads.

We have invested, and continue to invest, a substantial amount of engineering and manufacturing resources to develop process capabilities, as needed, including additive processing to produce suspension assembly flexures and DSA suspension assemblies, to meet the ever increasing performance requirements of our customers. If high-volume manufacturing of our TSA+ suspension assemblies that are produced using additive processing capabilities cannot be produced profitably in the quantities and to the specifications required by our customers, we may need to purchase increased quantities of additive flexures. We may not be able to purchase the necessary quantity of such components on terms acceptable to us or at all.

The introduction of new process capabilities for our products increases the likelihood of unexpected quality concerns, which may negatively impact our ability to bring products to market on time and at acceptable costs. Further, most of our current competitors use components produced through additive processing for volume production of suspension assemblies, which may give them an advantage in developing and qualifying new products with our customers. Since we started high-volume manufacturing of TSA+ suspension assemblies, we have experienced higher cost due to yield loss, production inefficiencies and equipment problems. These TSA+ costs added a cost burden of $30,400,000 in 2010, $32,000,000 in 2009 and $37,600,000 in 2008. These higher costs will continue until we achieve increased demand and further improvements in process efficiencies that are expected in the next year.

Our operating results are subject to fluctuations.

Our past operating results, and our gross profits, have fluctuated from fiscal period to period. We expect our future operating results and gross profits will continue to fluctuate from fiscal period to period. The following factors may cause these fluctuations:

 

   

changes in overall demand for our products;

 

   

changes in utilization of existing or newly added production capacity;

 

   

changes in our manufacturing yields and related scrap recovery;

 

   

changes in our production efficiency;

 

   

increased costs when we start producing new products and features, and ramping up high-volume production;

 

   

changes in our selling prices;

 

   

changes in our manufacturing process, or problems related to our manufacturing process;

 

   

changes in the specific products our customers buy and features they require;

 

   

changes in our infrastructure costs and expected production and shipping costs, and how we control them;

 

   

long disruptions in operations at any of our plants or our customers’ plants for any reason;

 

   

changes in the cost of, or limits on, available materials and labor; and

 

   

changes in fuel costs.

Gross profit has remained below our expectations primarily due to the substantial decline in our net sales, which reduced our ability to cover our fixed costs as well as the cost burden associated with TSA+ flexure production and our excess capacity. Gross profit was 9% in 2010, 2% in 2009 and 14% in 2008. TSA+ flexure production costs added a cost burden of $30,400,000 in 2010, $32,000,000 in 2009 and $37,600,000 in 2008. These higher costs will continue until we achieve increased demand and further improvements in process efficiencies.

 

13


A deterioration of our business could result in further underutilization of our manufacturing capacity and we may need to impair certain assets in the future. In 2009, we recorded non-cash impairment charges of $71,809,000 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations. This impairment included the closure of our Sioux Falls, South Dakota facility at the end of June 2009. If customer demand for suspension assemblies weakens, or if one or more customers reduce, delay or cancel orders, our business, financial condition and results of operations could be materially adversely affected. Furthermore, we may incur restructuring and asset impairment charges that would reduce our earnings.

We typically allow customers to change or cancel orders on short notice. We plan our production and inventory based primarily on forecasts of customer demand, including forecasts of customer pulls of product out of our VMI facilities. Our customers often prefer a dual source supply and, therefore, may allocate their demand among suppliers. Both customer demand and the resulting forecasts often fluctuate substantially. These factors, among others, create an environment where scheduled production and capacity utilization can vary, leading to variability in gross profits and difficulty in estimating our position in the marketplace.

Our selling prices are subject to market pressure from our competitors and pricing pressure from our customers. Our selling prices also are affected by changes in overall demand for our products, changes in the specific products our customers buy and a product’s life cycle. A typical life cycle for our products begins with higher pricing when products are introduced and decreasing prices as they mature. To offset price decreases during a product’s life, we rely primarily on higher sales volume and improving our manufacturing yields and efficiencies to reduce our cost. Disk drive manufacturers seek low cost designs and suspension assembly pricing is highly competitive. If we cannot reduce our manufacturing costs as prices decline during our products’ life cycles, our business, financial condition and results of operations could be materially adversely affected.

Demand for our suspension assemblies will decline if we are unable to qualify our products in disk drive programs.

We must qualify our products with our customers. The qualification process for disk drive products can be complex and difficult. We cannot be sure that our suspension assemblies will continue to be selected for design into our customers’ products. If we are unable to obtain additional customer qualifications, or if we cannot qualify our products for high-volume production quantities, or at all, our business, financial condition and results of operations could be materially adversely affected.

We may be unable to achieve our financial and strategic goals in connection with investments in our new assembly operation in Thailand.

We recently completed construction of an assembly operation in Thailand to manufacture our disk drive products. We may have significant unanticipated additional costs from initiating production at our new location, difficulty attracting or retaining key technical and managerial personnel for our new location, or difficulty integrating our new location operations into our existing operations. The creation and ongoing management of assembly operations in Thailand may divert management’s attention and resources from business issues related to our existing locations. We also may fail to identify significant issues in connection with our new location, such as issues related to its workforce, quality or reporting systems, local tax, legal and financial controls or contingencies. Additionally our operations in Thailand may be subject to various political, economic and other risks and uncertainties inherent in operating in foreign jurisdictions. Thailand has experienced political and civil unrest in the past and continued or future political or civil unrest in Thailand could adversely affect our ability to initiate and maintain operations in Thailand. An inability to manage these risks as part of our investment in this new manufacturing location could materially adversely affect our business, financial condition and results of operations.

If the rate of data density improves at a significantly faster rate than the rate of increase in the demand for disk drive storage, demand for suspension assemblies may decrease.

Disk drive manufacturers have been able to steadily increase data density, and we believe that they will continue to do so for the foreseeable future. Increasing data density permits drive manufacturers to reduce the average number of disks in each disk drive, which in turn reduces the number of components they need per drive, including suspension assemblies. The average number of suspension assemblies required per disk drive has been fairly stable from calendar 2005 to 2009 at 2.8 and we estimate it has increased slightly, to 3.0, in 2010. We estimate that the number of suspensions required per disk drive will remain relatively stable in calendar 2011. If improvements in data density outpace growth in data storage capacity requirements, demand for our suspension assemblies may decline and we may not be able to maintain or expand our suspension assembly business.

If our customers improve their manufacturing yields, demand for our suspension assemblies may decrease.

In the past, we believe that improvements in our sales and unit volumes have occasionally been due in part to manufacturing difficulties experienced by our customers as they transitioned to higher density read/write heads. These customers experienced higher levels of defective read/write heads, which they were unable to detect until after they had attached the read/write heads to our suspension assemblies and our customers required more suspension assemblies during those periods. If our customers’ production yields continue to improve in the future, or when they separate and re-use suspension assemblies or test the read/write head before attaching suspension assemblies, overall suspension assembly shipments could decline and our operating results could be negatively affected.

 

14


Competing process capabilities may reduce demand for our products.

We have historically held a market leadership position through innovation and technological advancement that has enabled our customers to deploy higher disk drive capacities at lower total costs. However, with the slowing of the areal density growth rate, the amount of technical innovation required to produce suspension assemblies also has decreased which has enabled our competitors to gain market share. If we can no longer differentiate our product features or process capabilities, competing suppliers may have access to a greater percentage of disk drive programs and program share. This inability to differentiate could be caused through our misunderstanding of market requirements, including technology changes, which could enable a competitor to take market share. The inability to differentiate our product offerings could also allow for supply chain alignments between our customers and other suppliers that could limit our access to available disk drive programs and corresponding market share. These alignments could include share agreements, sole-sourcing conditions or primary access to development programs. Any of the above scenarios could adversely impact our shipment volumes, average selling prices and operational costs.

Competing storage technology or reductions in demand for storage capacity may reduce demand for our products.

Other types of data storage technology, such as solid state storage or flash (semiconductor) memory, may become competitive with certain disk drive applications, and thereby could affect the demand for our products. Lower capacity storage needs increasingly are being met by flash memory. If flash memory suppliers overcome both the technical and economic limitations of flash memory storage and can offer better performance or more competitive cost per unit of capacity than disk drive products for higher capacity storage needs, demand for disk drives, and thus for our products, may decrease. Though consumer applications for flash storage also increase the need for back-up disk drives, mobile applications using flash memory storage also may displace the need for disk drive storage back-up. Additionally, consumers’ demand for storage capacity may not continue to grow as expected as a result of how consumers store data, such as the emerging storage processes for cloud computing and storage virtualization. These factors, among others, could lead to lower capacity hard drives or solid state storage memory that could reduce demand for disk drive components, including our suspension assemblies. Our business, financial condition and results of operations could be materially adversely affected if the computer industry adopts technology that reduces or replaces disk drives as a computer data storage medium.

We may have difficulty obtaining an adequate supply of raw materials that meet our strict specifications at reasonable prices.

Certain types of stainless steel, polyimide and photoresists are currently single-sourced because the raw materials provided by these sources meet our strict specifications. We have chosen to obtain certain other materials, such as laminate constructed from raw material that contains stainless steel, polyimide and copper, from a single or limited set of sources because of quality and pricing considerations. If we were not able to obtain an adequate supply of these materials from our current suppliers or if a current supplier were to exit the market, we could experience production delays and quality problems. Similarly, we obtain certain customized equipment and related repair parts from single sources because of the specialization of the equipment and the quality of these supply sources. In light of current uncertain market and economic conditions and the effect they may have on our suppliers, we are considering options that may reduce our risk of supply disruption.

The price we pay for stainless steel and laminate periodically is reset and can fluctuate with changes in the value of the Japanese yen, which will impact our costs. The price we pay for gold and other precious metals has fluctuated in the past. We have also experienced increased expenses due to higher fuel costs related to freight and higher utility rates. During times of increased prices, we typically do not pass this higher price on to our customers. If we could not obtain the materials referred to above in the necessary quantities, with the necessary quality and at reasonable prices, our business, financial condition and results of operations could be materially adversely affected.

BIOMEASUREMENT DIVISION

We do not know when, if ever, our BioMeasurement Division will be profitable.

We have a limited operating history in the medical device market. Our first-generation device was used primarily for research, and our second-generation product, the InSpectra StO2 System, was introduced to the trauma market late in calendar 2006. Based on the current pace of adoption of the InSpectra StO2 System and spending constraints in health care markets, our sales growth has been slower than expected. We do not know how many systems we will be able to sell, the sales breakdown between monitors and sensors, the profits we can expect or the amount of revenue that the product will generate. All of the division’s revenue through 2010 was derived from sales of a single product, the InSpectra StO2 System. Despite restructuring and cost reductions, we will continue to invest in sales and marketing, which will limit the division’s profitability. We do not know if we will ever generate enough revenue from medical device sales to offset our expenditures on the division.

 

15


We do not know whether any of our medical products, will achieve market acceptance.

Our marketing strategy must overcome the difficulties inherent in the introduction of new products to the medical community. Clinicians will not use the InSpectra StO2 System unless they conclude, based on clinical data and personal evaluation experience, that StO2 gives them information that is valuable when making treatment decisions. If clinicians continue to rely on other methods when assessing the status of patients experiencing hemorrhagic and other types of shock, we will not be successful in selling the InSpectra StO2 System. The development of new medical technology to assess tissue perfusion may render our product obsolete or uneconomical. Additionally, clinicians must be trained to use our InSpectra StO2 System effectively. Convincing clinicians to dedicate the time and energy necessary for adequate training in the use of our device is challenging, and we do not know whether we will be successful in these efforts. If the InSpectra StO2 System is not widely accepted by clinicians, is accepted more slowly than expected or is supplanted by superior technology, our ability to increase our sales may be materially adversely impacted.

We currently have limited experience as a company selling, marketing or distributing medical devices, which could impede the BioMeasurement Division’s ability to achieve profitability.

We have limited experience as a company in the marketing, sale and distribution of medical devices. We are marketing the InSpectra StO2 System through a direct sales force and have expanded our selling efforts through the use of distributors. Developing a direct sales force and distribution network is expensive and time consuming. Additionally, any direct sales force and distribution network that we develop will be competing against the experienced sales organizations used by other manufacturers of medical devices. We may not be able to develop this capability on a timely basis or at all. We face significant challenges and risks in establishing a direct sales force and distribution network and marketing our devices, including our ability to recruit, train and retain adequate numbers of qualified sales, clinical field specialist and marketing personnel; our ability to establish distributor relationships on terms acceptable to us, or at all; the ability of sales personnel to obtain access to or persuade adequate numbers of hospitals to purchase our device or clinicians to use our device; costs associated with hiring, maintaining and expanding a sales and marketing team; and government scrutiny associated with promotional activities in the health care industry. We also may face difficulties collecting accounts receivable balances, especially from purchasers in countries other than the United States. If we are unable to establish and maintain a direct sales, marketing and distribution network, our BioMeasurement Division may be unable to generate sufficient revenue to become profitable, which would have a material adverse effect on our financial condition and results of operations.

The long sales cycle for the InSpectra StO2 System will defer the generation of revenue by our BioMeasurement Division.

We believe that the InSpectra StO2 System has a long sales cycle because it involves the introduction of and education about a new measurement to potential customers. The period between initial discussions with a potential customer and a sale of even a single device to that customer often takes between six and twelve months, depending on the potential customer’s budget and capital approval process. In addition, in a weak economy, as in 2009 and 2010, capital spending decreases, which may further delay the purchase of our products. Training of clinicians also may take a number of weeks after a customer decides to purchase the InSpectra StO2 System. Reliance by our potential customers on third-party payors, including government programs and private health insurance plans, to reimburse some or all of the cost of patient care, and cost containment measures that health care providers and third-party payors are instituting, both in the United States and internationally, also could harm our ability to sell our product. These factors have created a significant lag in our ability to generate revenue and may contribute to substantial fluctuations in our quarterly operating results going forward, particularly during periods in which our sales volume is relatively low. We market the device by offering customers an evaluation followed by a direct sale, sensor purchase program or monitor rental period. The sensor purchase program or monitor rental sales methods will further delay the generation of significant revenue.

We may not be able to develop new applications for our products or expand our medical device product line successfully.

All of our BioMeasurement Division’s revenue in 2010 has come through sales of the InSpectra StO2 System. If we are unable to widely commercialize the use of this system through our marketing initiatives, our BioMeasurement Division will not be profitable. We are conducting research on other applications for the InSpectra StO2 System and our near infrared spectroscopy technology. The development of additional applications will require significant commitments of personnel and financial resources and we cannot be sure that they will be successful. Further, we cannot be sure that any new medical applications or medical devices we develop will receive regulatory approval or market acceptance. If the attempted extensions of our product offerings or new products are not commercially successful, our business, financial condition and results of operations may be materially and adversely affected.

 

16


We may encounter problems in manufacturing the InSpectra StO2 System that could result in lost revenue.

We manufacture all of our medical products at our Hutchinson, Minnesota facility. We could encounter problems at this facility that could delay or prevent us from manufacturing adequate quantities of product. In addition, we are dependent on various suppliers for manufacturing the components for the InSpectra monitor and sensors. Although we believe the components are available from alternative supplier we typically single source components due to low volumes. Replacing suppliers for custom components is time consuming and expensive should we be required to do so due to supply issues. Furthermore, if our quality control measures are not adequate, we may experience unanticipated product returns or warranty claims resulting in unforeseen expenses. If we are unable to meet demand and control costs revenue and profitability could be materially impacted.

We may fail to comply with regulations, or be subject to product recalls, which could hurt our ability to sell and distribute our device and could subject us to fines, injunctions and penalties.

Our products are classified as medical devices and therefore subject to governmental regulations in countries where they are sold. These regulations include registration, manufacturing, labeling, sale, promotion, importing, exporting, and shipping. Failure to comply with these regulations could result in inability to sell, market, manufacture or ship our product and could subject us to recalls, fines, injunction and penalties which could damage our business.

We face the risk of product liability claims if the InSpectra StO2 System fails to perform, and we may not be able to obtain adequate insurance.

The business of our BioMeasurement Division exposes us to the risk of product liability claims inherent in the testing, manufacturing and marketing of medical devices. Defects in the monitor or other performance problems in the system could result in the system’s failure to monitor tissue oxygenation accurately, which would subject us to product liability claims, and we may be subject to claims even if a medical failure is due to the actions of medical personnel using our product. Although we have product liability and clinical trial liability insurance that we believe is appropriate, this insurance is subject to deductibles and coverage limitations. Our current product liability insurance may not continue to be available to us on acceptable terms, if at all, or may not be adequate to cover any successful product liability claims. A product liability claim, recall or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could have a material adverse effect on our business, financial condition and results of operations. These liabilities also could prevent or interfere with our product commercialization efforts. Defending a product liability claim, regardless of merit, could be costly, could divert management’s attention from our business and might result in adverse publicity, which could adversely impact our business and financial performance.

Healthcare reform legislation could adversely affect our revenue and financial condition.

In March 2010, significant healthcare reform legislation was adopted as law in the United States. The new law includes provisions that, among other things, reduce Medicare reimbursements, require all individuals to have health insurance (with certain limited exceptions), and impose new and increased taxes, including an excise tax on U.S. sales of most medical devices beginning in 2013. We are evaluating the impact of this legislation on our business. Other healthcare legislation has been proposed at the federal and state levels. We cannot predict which proposals, if any, will be implemented at the federal or state level, or the effect any future legislation or regulation will have on us. The implementation of the new law and the adoption of additional healthcare legislation could adversely affect the demand for and pricing of our BioMeasurement Division products and, therefore, could have an adverse effect on our results of operations.

 

Item 2. Properties

We own four buildings on a site of approximately 163 acres in Hutchinson, Minnesota used by both our Disk Drive Components Division and our BioMeasurement Division. This site includes executive offices and a manufacturing plant, development center and training center, with an aggregate of approximately 790,000 square feet of floor area. We currently utilize approximately 80% of this space. We also lease a 20,000 square foot warehouse and a 7,200 square foot fabrication shop near the Hutchinson site. The training center building is currently leased to a third party.

We own a manufacturing plant in Eau Claire, Wisconsin used by our Disk Drive Components Division, which is approximately 859,000 square feet, approximately 85% of which we currently utilize.

We lease a building of approximately 100,000 square feet located in Plymouth, Minnesota that is used by our Disk Drive Components Division for stamping operations and office space, approximately 95% of which we currently utilize, and we lease approximately 48,000 square feet of warehouse space located in Brooklyn Park, Minnesota.

We recently completed construction of our assembly manufacturing plant in Ayutthaya, Thailand that will be used by our Disk Drive Components Division to assemble our Disk Drive Components Division products. The plant is approximately 123,000 square feet, approximately 50% of which we currently utilize.

 

17


We lease a business office in the Netherlands used by our BioMeasurement Division. Through our wholly-owned subsidiaries, we also lease offices used by our Disk Drive Components Division for customer service and support in Japan, Korea, the People’s Republic of China and Thailand.

We believe that our existing facilities will be adequate to meet our currently anticipated requirements for 2011.

 

Item 3. Legal Proceedings

We and certain users of our products have from time to time received, and may in the future receive, communications from third parties asserting patents against us or our customers which may relate to certain of our manufacturing equipment or products or to products that include our products as a component. In addition, certain of our customers have been sued on patents having claims closely related to products sold by us. If any third party makes a valid infringement claim and a license were not available on terms acceptable to us, our operating results could be adversely affected. We expect that, as the number of patents issued continues to increase, and as we grow, the volume of intellectual property claims could increase. We may need to engage in litigation to enforce patents issued or licensed to us, protect trade secrets or know-how owned by us or determine the enforceability, scope and validity of the intellectual property rights of others. We could incur substantial costs in such litigation or other similar legal actions, which could have a material adverse effect on our results of operations.

We are a party to certain claims arising in the ordinary course of business. In the opinion of our management, the outcome of such claims will not materially affect our current or future financial position or results of operations.

 

18


PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our common stock, $.01 par value, trades on the NASDAQ Global Select Market under the symbol HTCH. For price information regarding our common stock, see Note 12 to the consolidated financial statements contained in Item 15. As of December 1, 2010, our common stock was held by 559 shareholders of record.

Dividends

We have never paid any cash dividends on our common stock. We currently intend to retain all earnings for use in our business and do not anticipate paying cash dividends in the foreseeable future. Any future determination as to payment of dividends will depend upon our financial condition and results of operations and such other factors as are deemed relevant by our board of directors.

Performance Graph

Set forth below is a graph comparing, for a period five fiscal years ended September 26, 2010, the yearly cumulative total shareholder return of the S&P 500 Index and the AMEX Disk Drive Index. The comparison of total shareholder returns assumes that $100 was invested on September 26, 2005, in each of our company, the S&P 500 Index and the AMEX Disk Drive Index, and that dividends were reinvested when and as paid.

 

     2005      2006      2007      2008      2009      2010  

Hutchinson Technology Incorporated

   $ 100.00       $ 81.69       $ 92.87       $ 43.64       $ 26.61       $ 12.76   

AMEX Disk Drive Index (DDX)

   $ 100.00       $ 132.68       $ 136.15       $ 45.92       $ 90.90       $ 95.81   

S&P 500 INDEX

   $ 100.00       $ 108.19       $ 125.63       $ 77.39       $ 85.94       $ 94.52   

LOGO

Stock Repurchase Program

On February 4, 2008, we announced that our board of directors had approved a share repurchase program authorizing us to spend up to $130,000,000 to repurchase shares of our common stock from time to time in the open market or through privately negotiated transactions. The maximum dollar value of shares that may yet be purchased under the share repurchase plan is $72,368,000. We made no repurchases under this program during 2009 or 2010. The program does not have an expiration date and we may from time to time seek to repurchase additional shares through open market purchases, privately negotiated transactions or otherwise.

 

Item 6. Selected Financial Data

The selected financial data required pursuant to this Item appears on page 63 of this Annual Report on Form 10-K under the heading “Eleven-Year Selected Financial Data.”

 

19


 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion of our financial condition and results of operations should be read in conjunction with the selected historical consolidated financial data and consolidated financial statements and notes thereto appearing elsewhere in this Annual Report on Form 10-K.

General

Since the late 1980s, we have derived virtually all of our revenue from the sale of suspension assemblies to a small number of customers. We currently supply a variety of suspension assemblies to all manufacturers of disk drives and head-gimbal assemblers for all sizes of disk drives. Suspension assemblies are a critical component of disk drives, and our results of operations are highly dependent on the disk drive industry. The disk drive industry is intensely competitive, and demand for disk drive components fluctuates. Our results of operations are affected from time to time by disk drive industry demand changes, adjustments in inventory levels throughout the disk drive supply chain, technological changes that impact suspension assembly demand, shifts in our market position and our customers’ market position, changes in supply chain alignment by a customer, our customers’ production yields and our own product transitions, production yields and production capacity utilization.

Our BioMeasurement Division is engaged in the development, production and commercialization of products for the medical device market. Net sales from the InSpectra StO2 System during 2010, our third full year in the market, were $2,414,000. Over the course of 2010, we added 40 new customers and grew the installed base of InSpectra StO2 Systems to 344 across 138 customers, up from 222 across 98 customers at the end of 2009. While the pace of customer acceptance and adoption was slower than we had hoped in 2010, we were able to broaden the installed base in the face of hospital spending constraints. The division’s net sales in 2011 are currently expected to range from $3,000,000 to $5,000,000. These expectations for 2011 net sales are contingent upon growing market acceptance of our existing and new products and upon hospital spending levels, which have been constrained by industry economic conditions.

In 2009, due to the weak economy, consumer spending declined and retail demand for computers and other consumer electronics decreased, as well as business demand for computer systems, and demand for suspension assemblies therefore was adversely impacted. In response to weakened demand and due to changing and uncertain market and economic conditions, in 2009 we took actions to reduce our cost structure and improve our cash flow to help us to meet the current portion of our debt obligations and make strategic investments as needed. To achieve improvements in efficiency and facility utilization and to reduce operating costs, we closed our Sioux Falls, South Dakota facility at the end of June 2009 and consolidated the related suspension assembly operations into our Eau Claire, Wisconsin and Hutchinson, Minnesota sites. We also consolidated photoetching operations into our Hutchinson, Minnesota site and trace operations into our Eau Claire, Wisconsin site. In addition to the weakened demand, during the third quarter of 2009, we were notified by one of our customers, Seagate, that it intended to significantly reduce its procurement of our suspension assemblies.

While the overall market for suspension assemblies grew in 2010, our shipments of suspension assemblies declined 7% from 2009 due to further market share losses. In addition, a defect on some of our TSA+ product resulted in lost volume in the third and fourth quarters of 2010. In our BioMeasurement Division, slower than expected sales growth based on the current pace of adoption of the InSpectra StO2 System and spending constraints in health care markets world-wide led us to initiate operating changes within the BioMeasurement Division to reduce our operating loss. For 2010, we recorded non-cash impairment charges of $2,294,000 for the impairment of long-lived assets related to the manufacturing and selling of InSpectra StO2 Systems. As we evaluated the impact of our operating changes on our forecast of future operating results in our BioMeasurement Division, we determined that the recorded values of many of the division assets were no longer deemed recoverable. Since these assets are no longer expected to generate future positive cash flows in excess of the recorded values, the assets were impaired but will continue to be used on an ongoing basis.

During the 2010 fourth quarter, we completed the construction of our Thailand facility on time. We are now shipping product from the Thailand assembly operation for customer qualification, as planned. The Thailand operation will be instrumental to attaining our goal of being the lowest cost producer of suspension assemblies. We anticipate that the Thailand assembly operation will improve our ability to serve our customers’ operations in Asia and enable us to reduce our labor costs, freight costs and future income taxes. We spent approximately $15,000,000 in capital expenditures in 2010 related to our Thailand assembly operation. We also spent approximately $5,700,000 on facility startup expenses in 2010 and expect to spend approximately $4,000,000 more for startup expenses in the first quarter of 2011. We expect our cost position to steadily improve as we shift more assembly volume to the Thailand site.

During the 2010 fourth quarter, we took actions to further reduce costs and preserve cash. We targeted annualized cost reductions of approximately $25,000,000 company-wide. In our BioMeasurement Division, we expect to reduce annualized costs by approximately $12,000,000 in light of slower than expected revenue growth and we will focus our sales and marketing activities primarily on the customers, applications and geographic markets where we have momentum. These planned cost reductions in our BioMeasurement Division were more than 75% complete at the end 2010 and will substantially reduce the division’s operation loss in 2011. In our Disk Drive Components Division, we reduced costs by approximately $8,000,000, while keeping intact capabilities that are core to our competitive position, including product design, rapid prototype development, speed to volume and very low part-to-part variation in our finished product. We also reduced our corporate expenses by approximately $5,000,000. The Disk Drive Components Division reductions and corporate expense reductions were nearly complete at the end of 2010.

 

20


Our cash and investments balance totaled $104,538,000 at the end of 2010, compared with $202,707,000 at the end of the preceding year. With the repayment of our 2.25% Convertible Subordinated Notes due 2010 (“2.25% Notes”) and the loan balance obtained against our portfolio of auction rate securities, we reduced the principal amount of our debt balance from $301,250,000 at the end of 2009 to $198,445,000 at the end of 2010, with all but $945,000 subject to holders’ right to require us to repurchase the 3.25% Notes for cash on or after January of 2013.

In the long-term, we believe that end user demand for storage capacity will continue to increase as evolving consumer electronics and computing applications continue to require storage devices with increased capacity and functionality, which will increase disk drive demand and, therefore, suspension assembly demand. As we enter calendar year 2011, we believe that customer inventory reductions will be largely complete. As a result and due to growing confidence in the reliability of supply from our TSA+ process, we expect our shipments in each of the last three quarters of 2011 will exceed the quarterly volume of our shipments in our 2011 first quarter.

To return to positive cash generation and profitability, we must increase revenues through volume growth in our Disk Drive Components Division. The growth will come through capturing overall market growth and through regaining market share. We believe improvements in our TSA+ efficiency and output, coupled with cost reductions that will result from ramping up assembly operations at our plant in Thailand, will help us resume volume growth.

In our BioMeasurement Division, we have substantially reduced costs to narrow the division’s operating losses. With the expected introduction of our Spot Check product in 2011, we are offering an easy and inexpensive means for clinicians to identify patients at risk, which we believe will increase the use of St02 monitoring.

The following table sets forth our quarterly suspension assembly shipment quantities for our Disk Drive Components Division in millions for the periods indicated:

 

     2009 by Quarter      2010 by Quarter  
     First      Second      Third      Fourth      First      Second      Third      Fourth  

Suspension assembly shipment quantities

     155         107         146         145         155         130         117         110   

Our second quarter 2009 shipments decreased primarily due to lower demand for disk drives, lower disk drive production as the drive makers reduced inventory levels and a modest loss of overall market share. The share loss was primarily in the 2.5-inch ATA segment that was partially offset by share gains in the 3.5-inch ATA segment. Our third quarter 2009 shipments increased 36 percent compared with the preceding quarter as a result of stronger demand in every segment.

Our first quarter 2010 shipments increased from the fourth quarter of 2009 primarily due to normal seasonal increases. In our second quarter 2010, our 16 percent sequential quarter decline in shipments was more than the estimated decline in world-wide suspension assembly shipments. This market share loss resulted primarily from our broad implementation of a TSA+ process improvement in that quarter that prevented us from meeting demand and from share shifts among disk drive manufacturers. Our third quarter 2010 shipments declined 11 percent sequentially primarily due to reductions in disk drive makers’ production plans. In addition, we lost volume late in the quarter due to a defect on some of our TSA+ product which prevented us from realizing expected share growth opportunities on certain customer programs. Our fourth quarter 2010 shipments declined about five percent due to inventory reductions at a certain customer that reduced our shipments, and shipments were also negatively impacted by the TSA+ product defect we encountered late in the third quarter of 2010.

Our average selling price decreased from $0.80 in our fourth quarter 2008 to $0.66 in our fourth quarter 2010 due to shifts in product mix and competitive pressures. We expect continued downward pressure on our average selling price in 2011.

Our gross profits have fluctuated and will continue to fluctuate based upon a variety of factors, key among them being changes in demand for our suspension assemblies. Our customers often prefer a multiple source supply strategy and, therefore, may allocate their demand among suppliers. We plan our production and inventory based primarily on forecasts of customer demand, including forecasts of customer pulls of product out of our VMI facilities. Certain agreements with our customers also provide that we maintain minimum finished goods inventory levels for them. Both customer demand and the resulting forecasts often fluctuate substantially. These factors, among others, create an environment where scheduled production and capacity utilization can vary significantly from week to week, leading to variability in gross profits and difficulty in estimating our position in the marketplace.

From the end of 2008 to the first quarter of 2010, we substantially improved our gross margin despite a decline in net sales. The improvement was the result of the actions we took in 2009 to restructure our business and reduce our costs, as well as a turnaround in demand that began in the latter half of 2009. Gross profit in the first quarter of 2010 was 19 percent, up from 17 percent in the fourth quarter of 2009, primarily due to an increase in net sales. Gross profit decreased in the second quarter of 2010, however, to $7,315,000, or 8 percent, primarily due to a 16 percent sequential quarter decline in suspension assembly shipments. Gross profit in the third quarter of 2010 decreased to $4,907,000, or 6 percent of net sales, primarily due to a further decline in suspension assembly shipments, an estimated $2,000,000 of costs related to a TSA+ product defect and $1,110,000 of asset impairments in our BioMeasurement Division, but also benefited from a build in suspension assembly inventory. In the fourth quarter of 2010, our gross profit was zero primarily due to a 19 percent reduction in our finished goods inventory, which brought our finished goods inventory levels down from 6 weeks to 4 1/2 weeks.

 

21


In addition to increases in suspension assembly demand, improvement in our gross profits and operating profits will depend, in part, on the successful management of our corporate infrastructure and our suspension assembly production capacity. Our business is capital intensive and requires a high level of fixed costs. Our profits are sensitive to our level of fixed costs, as well as changes in volume, capacity utilization and product mix. In the future, we may need to adjust our overall employment level due to fluctuating demand. Our overall employment level was 4,591 at the end of 2008, 2,448 at the end of 2009 and 2,546 at the end of 2010.

We shipped 116 million TSA+ suspension assemblies during 2010, up from 43 million in 2009 and six million in 2008. For 2011, we expect TSA+ suspension assemblies to account for a steadily increasing proportion of our shipments, growing from approximately a third of our shipments in the fourth quarter of 2010 to half of our shipments by mid-2011 and two-thirds of our shipments by the end of 2011. We believe the industry will fully transition to additive suspensions over the next two to four years. We are also purchasing additive flexures to fill other customer requirements.

In the third and fourth quarters of 2010, a defect on some of our TSA+ product resulted in lost shipments. The measures we took to isolate and contain the product defect also reduced our yield and limited our output for those quarters, which prevented us from realizing some expected opportunities to gain share. Due to the yield reduction and additional costs associated with the TSA+ product defect, the TSA+ flexure cost burden declined less than we expected in 2010 and we are now targeting elimination of the cost burden in the first half of 2011. We may in the future experience additional process issues that could impact our ability to meet customer demand and cause us to incur higher costs.

We are actively involved with several of our customers on DSA designs and prototypes. We are shipping prototypes of DSA suspensions to four of the five hard disk drive OEMs, and we have received very positive feedback regarding the performance of our DSA suspensions in their tests. The timing and volume of our customers’ DSA programs are subject to, among other things, the economics of existing and future technical alternatives that may also meet their disk drive requirements.

For 2009, our capital expenditures were $20,609,000, primarily for TSA+ suspension production capacity, new program tooling and deployment of new process technology and capability improvements. Capital spending for 2010 was $31,382,000, primarily for additional TSA+ suspension production capacity, construction of our Thailand assembly operation and new program tooling. We currently expect our capital expenditures to be approximately $20,000,000 to $25,000,000 in 2011, primarily for additional TSA+ flexure production capacity and tooling and manufacturing equipment for new process technology and capability improvements, such as DSA suspension assemblies. We continue to gain customer acceptance on new programs with our TSA+ products and expect TSA+ suspensions to grow significantly as a percentage of our product mix, as they continue to replace TSA suspensions.

Market Trends

Our suspension assemblies are components in hard disk drives used in computers and a variety of consumer electronics products. We believe that the continued growth of digital content world-wide requires increasingly higher storage capacity in order to store, aggregate, host, distribute, manage and backup content, which we believe will continue to result in increased demand for disk drives.

Non-compute applications, such as digital video recorders (DVRs), gaming devices, digital cameras and internet based storage of consumer data are driving the broad, global growth of digital content through:

 

   

creation and sharing of all types of digital content, such as high-resolution photos, high definition video and movies, and music by consumers and data by enterprises;

 

   

collection and distribution of digital content through services and other company offerings such as YouTube by Google, Inc.;

 

   

network infrastructure, including broadband, cable and satellite, which is enabling the access, hosting and distribution of digital content;

 

   

consumption of digital content through DVRs, handheld devices and gaming consoles; and

 

   

protection of content through storage backup devices and services.

However, the demand for disk drives and, therefore suspension assemblies can be volatile as experienced in calendar 2009 and 2010 due to market and world economic conditions. In a weak economy, consumer spending tends to decline and retail demand for computers and other consumer electronics tends to decrease, as does business demand for computer systems. Demand for suspension assemblies, therefore, may be adversely impacted as a result of a weaker economy.

In the long-term, however, we expect that the growth in digital content and the expanding use of enterprise computing and storage, desktop and mobile computers, increasingly complex software as well as the data intensive non-compute market will increase demand for disk drives and therefore, suspension assemblies.

We also believe demand for disk drives will continue to be subject, as it has in the past, to rapid or unforeseen changes resulting from, among other things, changes in disk drive inventory levels, technological advances, responses to competitive price changes and unpredicted high or low market acceptance of new drive models and the end devices in which disk drives are used.

 

22


As in past years, disk drives continue to be the primary storage device of choice for applications requiring shorter access times and higher capacities because of their speed and low cost per unit of stored data. The cost of storing data on disk drives continues to decrease primarily due to increasing data density, thereby increasing storage capacity in disk drives or reducing the number of components, including suspension assemblies, required in a disk drive. The continual pursuit of increased data density and lower storage costs is leading to suspension assemblies with flexures that have finer electrical conductors, greater lead counts and increased complexity such as interleaved or stacked traces, and to the adoption of value-added features for suspension assemblies, such as formed and polished headlifts, larger dampers with through hole features, and a variety of limiter configurations. We are also actively involved with several of our customers on DSA designs and prototypes.

The development of next-generation read/write technology and the introduction of new types or configurations of read/write heads configurations and sizes, and the continuing improvement in data density and the use of disk drives in consumer electronics applications will require even finer electrical conductors on the suspension assembly. Next-generation disk drives also may require additional electrical conductors. These changes may temporarily increase our development spending and reduce our manufacturing yields and efficiencies. We are investing in developing the process capabilities and related capital equipment required to meet new industry specifications in 2011 and beyond.

The advent of new disk drive technologies may initially decrease our customers’ yields with the result that we may experience temporary elevations of demand for some types of suspension assemblies. As programs mature, higher customer yields decrease the demand for suspension assemblies. In addition, disk drive manufacturers are increasingly seeking lower cost designs and suspension assembly pricing is highly competitive. While we are generally able to increase our selling price for suspension assemblies when they are introduced, our selling prices decrease as our products mature.

2010 Operations to 2009 Operations

The following table sets forth our consolidated statements of operations as a percentage of net sales from period to period.

 

     Percentage of Net Sales  
     2010     2009     2008  

Net sales

     100     100     100

Cost of sales

     91        98        86   
                        

Gross profit

     9        2        14   

Research and development expenses

     6        7        6   

Selling, general and administrative expenses

     16        13        12   

Severance and other expenses

     1        7          

Litigation charge

                   1   

Asset impairment and other charges

            18          
                        

Loss from operations

     (14     (43     (5

Gain on extinguishment of debt

            4          

Other income, net

     2        2          

Interest expense

     (5     (4     (1

Loss on short- and long-term investments

                   (1
                        

Loss before income taxes

     (17     (41     (7

Provision for income taxes

                   10   
                        

Net (loss) income

     (17 )%      (41 )%      (17 )% 
                        

Net sales for 2010 were $347,189,000, compared to $408,022,000 for 2009, a decrease of $60,833,000. Suspension assembly sales decreased $60,011,000, primarily as a result of a 7% decrease in suspension assembly unit shipments and our average selling price decreased 8% year-over-year from an average of $0.72 in 2009 to an average of $0.66 in 2010 due to competitive pressures. The decrease in suspension assembly unit shipments in 2010 was primarily due to market share losses. Net sales in our BioMeasurement Division were $2,414,000 in 2010, compared to $1,755,000 in 2009.

Gross profit for 2010 was $32,965,000, compared to $7,534,000 for 2009, an increase of $25,431,000. Gross profit as a percent of net sales was 9% in 2010, compared to 2% in 2009. The higher gross profit in 2010 was primarily due to the benefits of our 2009 restructuring and cost reduction actions, and lower deprecation. Our BioMeasurement Division incurred $1,110,000 of asset impairments.

 

23


Research and development expenses for 2010 were $21,429,000, compared to $26,776,000 for 2009, a decrease of $5,347,000. The decrease was primarily related to lower labor expenses as a result of our 2009 restructuring and cost reduction actions, partially offset by $394,000 of asset impairments in our BioMeasurement Division. Research and development expenses specific to our BioMeasurement Division were $5,033,000 in 2010 and $4,265,000 in 2009. Research and development expenses as a percent of net sales were 6% in 2010 and 7% in 2009.

Selling, general and administrative expenses for 2010 were $55,848,000, compared to $54,880,000 for 2009, an increase of $968,000. The higher selling, general and administrative expenses were primarily due to $5,700,000 of Thailand operation startup expenses and $790,000 of asset impairments in our BioMeasurement Division, offset by reductions in labor expenses as a result of our 2009 restructuring and cost reduction actions. Selling, general and administrative expenses as a percent of net sales were 16% in 2010 and 13% in 2009. Selling, general and administrative expenses specific to our BioMeasurement Division were $17,358,000 in 2010 and $17,991,000 in 2009.

In response to weakening demand for suspension assemblies and due to changing and uncertain market and economic conditions, we took actions to reduce our costs in 2009. During the first quarter of 2009, we announced a restructuring plan that included eliminating positions company-wide. During January 2009, we eliminated approximately 1,380 positions. The workforce reduction resulted in a charge for severance and other expenses of $19,527,000, which were included in our first quarter of 2009 financial results. The workforce reductions were completed by the end of January 2009.

During the first quarter of 2009, we recorded non-cash impairment charges of $32,280,000 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations. The impairment review was triggered by weakened demand for suspension assemblies and uncertain future market conditions. In response to these conditions, we made structural changes to consolidate some of our component and assembly manufacturing among our sites.

During the second quarter of 2009, we took actions to further restructure the company and reduce our overall cost structure in our Disk Drive Components Division. We closed our Sioux Falls, South Dakota facility at the end of June 2009 and consolidated the related suspension assembly operations into our Eau Claire, Wisconsin and Hutchinson, Minnesota sites. The assembly operations consolidation resulted in a net elimination of approximately 220 positions. In addition, we consolidated our Eau Claire, Wisconsin site’s photoetching operations into our Hutchinson, Minnesota site and our Hutchinson, Minnesota site’s trace operations into our Eau Claire, Wisconsin site to achieve improvements in efficiency and facility utilization and to reduce operating costs. We also reduced the workforce in our components operation in Eau Claire, Wisconsin by approximately 100 positions. The second quarter 2009 workforce reductions resulted in a charge for severance and other expenses of $4,787,000.

In response to further weakened demand for suspension assemblies and as a result of the additional restructuring actions in the second quarter discussed above, we recorded non-cash impairment charges of $18,688,000 in the second quarter of 2009 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations.

During the third quarter of 2009, we took actions to reduce costs and improve cash flow. We further restructured the company to adjust to market conditions and the expected phase-out of suspension assembly shipments to one of our customers, Seagate. The restructuring actions included eliminating approximately 300 additional positions. The third quarter 2009 workforce reductions resulted in a charge for severance and other expenses of $4,894,000.

During the third quarter of 2009, as a result of the expected phase-out of suspension assembly shipments to Seagate, and the restructuring actions in the third quarter discussed above, we recorded additional non-cash impairment charges of $20,841,000 for the impairment of long-lived assets primarily related to assembly manufacturing equipment in our Disk Drive Components Division.

During the fourth quarter of 2010, we announced actions to further reduce costs, including eliminating approximately 80 positions company-wide. The workforce reduction resulted in a charge for severance expenses of $3,674,000, of which, $1,150,000 remains to be paid.

Loss from operations for 2010 included a $23,959,000 loss from operations for our BioMeasurement Division compared to a $23,485,000 loss for 2009. The BioMeasurement Division’s loss for 2010 includes $2,294,000 of asset impairments in this division, discussed above.

Interest income for 2010 was $1,311,000, compared to $3,184,000 for 2009, a decrease of $1,873,000. The decrease in interest income was primarily due to a lower investment balance and a decline in interest rates as a result of an overall lower interest rate environment.

The loss on short- and long-term investments for 2010 was $319,000, compared to a gain of $4,390,000 for 2009. The gain in 2009 was primarily due to a gain of $5,439,000 in the value of the securities subject to the offer by UBS AG, UBS Financial Services Inc. and UBS Securities LLC (collectively, “UBS”) to issue to us Auction Rate Securities (ARS) rights (the “Rights Offering”), which was offset by a $1,305,000 loss we recognized due to an impairment of our ARS held with UBS.

 

24


During 2009, we spent $89,525,000 to repurchase $104,446,000 par value of our 2.25% Notes on the open market using our available cash and cash equivalents, at varying discounts to face value. Upon completion of the repurchases, the repurchased 2.25% Notes were cancelled. The resulting gain of $14,461,000 is included in our consolidated financial statements.

During the fourth quarter of 2009, we spent $19,987,000 to repurchase $27,500,000 par value of our 3.25% Notes on the open market using our available cash and cash equivalents, at an average discount to face value of approximately 27 percent. At the time of repurchase the 3.25% Notes had a book value of $23,139,000, which includes the par value of the notes, offset by the remaining debt discount of $4,361,000. Upon completion of the repurchases, the repurchased 3.25% Notes were cancelled. The resulting gain of $2,792,000 is included in our consolidated financial statements.

The income tax benefit for 2010 was $1,585,000. The income tax benefit in 2010 was due primarily to a change in U.S. tax law that enabled us to carry back some of our operating losses to prior years and apply for a refund of taxes paid in those years of $2,046,000. These refunds were offset by $447,000 of foreign tax expense.

The income tax benefit for 2009 was $209,000. The income tax benefit for 2009 was due primarily to certain provisions of the American Recovery and Reinvestment Act of 2009 that permit certain tax credits to be converted into cash refunds in lieu of claiming bonus depreciation, which was partially reduced by foreign income tax expense.

2009 Operations to 2008 Operations

Net sales for 2009 were $408,022,000, compared to $631,619,000 for 2008, a decrease of $223,597,000. Suspension assembly sales decreased $224,005,000 compared to 2008, primarily as a result of a 30% decrease in suspension assembly unit shipments and our average selling price decreasing from an average of $0.80 in 2008 to an average of $0.72 in 2009 due to competitive pressures, resulting in a 9% lower average selling price year-over-year. The decrease in suspension assembly unit shipments in 2009 was primarily due to lower demand for disk drives, lower disk drive production as the drive makers reduced inventory levels and loss of market share. Net sales in our BioMeasurement Division were $1,755,000 in 2009 and $1,043,000 in 2008.

Gross profit for 2009 was $7,534,000, compared to $85,480,000 for 2008, a decrease of $77,946,000. Gross profit as a percent of net sales was 2% in 2009, compared to 14% in 2008. The lower gross profit in 2009 was primarily due to the substantial decline in net sales, which reduced our ability to cover our fixed costs, and excess capacity. Cost of sales also included a cost burden associated with TSA+ flexure production of $32,000,000 compared to $37,600,000 for 2008. These negative impacts on gross profit were partially offset by decreases during the year in manufacturing overhead expense.

Research and development expenses for 2009 were $26,776,000, compared to $39,711,000 for 2008, a decrease of $12,935,000. The decrease was primarily related to lower labor expenses due to reduced headcount and lower supply expenses. Research and development expenses specific to our BioMeasurement Division were $4,265,000 in 2009 and $4,767,000 in 2008. Research and development expenses as a percent of net sales were 7% in 2009 and 6% in 2008.

Selling, general and administrative expenses for 2009 were $54,880,000, compared to $73,303,000 for 2008, a decrease of $18,423,000. The lower selling, general and administrative expenses were primarily due to lower expenses, including reductions in labor expenses resulting from lower headcount, depreciation expenses, professional services expenses and recruitment and relocation expenses. Selling, general and administrative expenses as a percent of net sales were 13% in 2009 and 12% in 2008. Selling, general and administrative expenses specific to our BioMeasurement Division were $17,991,000 in 2009 and $15,929,000 in 2008.

During the third quarter of 2008, we took actions to reduce operating costs, including eliminating approximately 80 positions company-wide. The workforce reduction resulted in a charge for severance expenses of $1,061,000.

In response to weakening demand for suspension assemblies and due to changing and uncertain market and economic conditions, we took actions to reduce our costs in 2009. During the first quarter of 2009, we announced a restructuring plan that included eliminating positions company-wide. During January 2009, we eliminated approximately 1,380 positions. The workforce reduction resulted in a charge for severance and other expenses of $19,527,000, which were included in our first quarter of 2009 financial results. The workforce reductions were completed by the end of January 2009.

During the first quarter of 2009, we recorded non-cash impairment charges of $32,280,000 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations. The impairment review was triggered by weakened demand for suspension assemblies and uncertain future market conditions. In response to these conditions, we made structural changes to consolidate some of our component and assembly manufacturing among our sites.

During the second quarter of 2009, we took actions to further restructure the company and reduce our overall cost structure in our Disk Drive Components Division. We closed our Sioux Falls, South Dakota facility at the end of June 2009 and consolidated the related suspension assembly operations into our Eau Claire, Wisconsin and Hutchinson, Minnesota sites. The assembly operations consolidation resulted in a net elimination of approximately 220 positions. In addition, we consolidated our Eau Claire, Wisconsin site’s photoetching operations into our Hutchinson, Minnesota site and our Hutchinson, Minnesota site’s trace operations into our Eau Claire, Wisconsin site to achieve improvements in efficiency and facility utilization and to reduce operating costs. We also reduced the workforce in our components

 

25


operation in Eau Claire, Wisconsin by approximately 100 positions. The second quarter 2009 workforce reductions resulted in a charge for severance and other expenses of $4,787,000.

In response to further weakened demand for suspension assemblies and as a result of the additional restructuring actions in the second quarter discussed above, we recorded non-cash impairment charges of $18,688,000 in the second quarter of 2009 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations.

During the third quarter of 2009, we took actions to reduce costs and improve cash flow. We further restructured the company to adjust to market conditions and the expected phase out of suspension assembly shipments to our customer, Seagate Technology. The restructuring actions included eliminating approximately 300 additional positions. The third quarter 2009 workforce reductions resulted in a charge for severance and other expenses of $4,894,000.

During the third quarter of 2009, as a result of the expected phase out of suspension assembly shipments to our customer, Seagate Technology, and the restructuring actions in the third quarter discussed above, we recorded additional non-cash impairment charges of $20,841,000 for the impairment of long-lived assets primarily related to assembly manufacturing equipment in our Disk Drive Components Division.

During 2008, we recorded a litigation charge of $2,003,000 related to the tentative settlement of a class action lawsuit. The lawsuit challenged our pay practices pertaining to the time certain production employees spend gowning and ungowning at the beginning and end of their shifts and meal breaks. The charge was comprised of settlement payments to these employees and payment of their attorney’s fees and expenses.

Loss from operations for 2009 included a $23,485,000 loss from operations for our BioMeasurement Division compared to a $22,662,000 loss for 2008. The increased loss from BioMeasurement operations was due to higher allocated expenses from corporate departments as the business has grown and to severance expenses.

Interest income for 2009 was $3,184,000, compared to $10,519,000 for 2008, a decrease of $7,335,000. The decrease in interest income was primarily due to lower investment yields as a result of an overall lower interest rate environment.

Interest expense for 2009 was $19,762,000, compared to $19,767,000 for 2008, a decrease of $5,000. The decrease in interest expense for 2009 was primarily due to lower capitalized interest expense resulting from reduced capital investments and reduced interest expense due to our debt repurchases during the fiscal year.

During 2009, we recorded a gain of $4,390,000 related to the Rights Offering and increased value of our ARS due to changes in the interest rate spread used in our discounted cash flow model, as described in Note 1 to the consolidated financial statements contained in Item 15.

During the fourth quarter of 2008, we recorded a charge of $8,484,000 related to an other-than-temporary impairment of our long-term investments to reflect the reduction in carrying value of our ARS from a par value of $100,650,000 to an estimated fair value of $92,166,000. In light of then-current uncertain market and economic conditions, we concluded we may not hold our ARS until final maturity (up to 38 years) if the opportunity arises to sell these securities on reasonable terms.

During the first, third and fourth quarters of 2009, we spent $89,525,000 to repurchase $104,446,000 par value of our 2.25% Notes on the open market using our available cash and cash equivalents, at varying discount to face value. Upon completion of the repurchases, the repurchased 2.25% Notes were cancelled. The resulting gain of $14,461,000 is included in our consolidated financial statements.

During the fourth quarter of 2009, we spent $19,987,000 to repurchase $27,500,000 par value of our 3.25% Notes on the open market using our available cash and cash equivalents, at an average discount to face value of approximately 27 percent. At the time of repurchase the notes had a book value of $23,139,000, which includes the par value of the notes, offset by the remaining debt discount of $4,361,000. We have $197,500,000 par value of the 3.25% Notes outstanding. Upon completion of the repurchases, the repurchased 3.25% Notes were cancelled. The resulting gain of $2,792,000 was included in our consolidated financial statements.

The income tax benefit for 2009 was $209,000. The income tax benefit for 2009 is due primarily to certain provisions of the American Recovery and Reinvestment Act of 2009 that permit certain tax credits to be converted into cash refunds in lieu of claiming bonus depreciation, which was partially reduced by foreign income tax expense.

The income tax provision for 2008 was $60,709,000. The pretax loss for 2008 resulted in a statutory tax benefit of $16,195,000. The negative annual effective tax rate was caused by the full valuation allowance charge of $77,983,000 against our deferred tax assets. FASB guidance requires that companies assess whether valuation allowances should be established against their deferred tax assets based on the consideration of all available evidence, using a “more likely than not” standard. In making such assessments, significant weight is given to evidence that can be objectively verified. A company’s current or previous losses are given more weight than its future outlook. Under that standard, our three-year historical cumulative loss was a significant negative factor. This loss, combined with uncertain near-term market and economic conditions, reduced our ability to rely on our projections of future taxable income in determining whether a valuation allowance is appropriate. Accordingly, we concluded that a full valuation allowance is appropriate. We will continue to assess the likelihood

 

26


that our deferred tax assets will be realizable, and our valuation allowance will be adjusted accordingly, which could materially impact our financial position and results of operations.

Liquidity and Capital Resources

Our principal sources of liquidity are cash and cash equivalents, cash flow from operations and additional financing capacity, if available given current credit market conditions and our operating performance. Our cash and cash equivalents decreased from $106,391,000 at September 27, 2009, to $55,639,000 at September 26, 2010. Our short- and long-term investments decreased from $120,632,000 to $48,899,000 during the same period. In total, our cash and cash equivalents and short- and long-term investments decreased by $122,485,000. This decrease was primarily due to $102,793,000 used for repurchases of long-term debt and $31,382,000 for capital expenditures. These decreases were partially offset by $13,742,000 of cash generated from operations.

In light of the significant decreases in our net sales over the past two completed fiscal years and current uncertain market and economic conditions, we are aggressively managing our cost structure and cash position to ensure that we will meet our debt obligations while preserving the ability to make investments that will enable us to respond to customer requirements and achieve long-term profitable growth. We currently believe that our cash and cash equivalents, short-term investments, cash generated from operations and additional financing, if needed and as available given current credit market conditions and our operating performance, will be sufficient to meet our forecasted operating expenses, other debt service requirements, debt and equity repurchases and capital expenditures through 2011. Holders of our $197,500,000 par value outstanding 3.25% Notes may require us to purchase all or a portion of their 3.25% Notes for cash as early as January 15, 2013. We anticipate that we would need to obtain additional financing if the holders of our 3.25% Notes require us to purchase all or a portion of their 3.25% Notes for cash on that date. Our ability to obtain additional financing will depend upon a number of factors, including our future performance and financial results and general economic and capital market conditions. We cannot be certain that we will be able to raise additional financing on terms acceptable to us, including covenants that we will be able to comply with in the short term, or at all, if needed. If we are unable to obtain new financing, if and when necessary, our future financial results and liquidity could be materially adversely affected.

Effective December 19, 2008, we entered into a settlement (the “UBS Settlement”) with UBS AG, UBS Financial Services Inc. and UBS Securities LLC (collectively, “UBS”) that provided liquidity for our ARS portfolio held with UBS and to resolve pending litigation between the parties. The UBS Settlement provided for certain arrangements, one of which was our acceptance of an offer by UBS to issue to us ARS rights (the “Rights Offering”), which allowed us to require UBS to repurchase at par value all of the ARS held by us in accounts with UBS at any time during the period from June 30, 2010, through July 2, 2012 (if our ARS had not previously been sold by us or by UBS on our behalf or redeemed by the respective issuers of those securities). During the fourth quarter of 2010, we exercised the rights issued to us in the Rights Offering for the remaining ARS held by us and subject to the Rights Offering.

As part of the UBS Settlement, we also entered into a loan agreement with UBS Credit Corp. (“UBS Credit”), which provided us with a line of credit (the “UBS Credit Line”) secured only by the ARS we held in accounts with UBS. The proceeds derived from any sales of the ARS we held in accounts with UBS were to be applied to repayment of the UBS Credit Line. Following our exercise of the rights issued to us in the Rights Offering, the proceeds of the repurchase of ARS were applied to repay the UBS Credit Line. As of September 26, 2010, we had repaid all of the UBS Credit Line available to us.

On March 19, 2010, we entered into a settlement agreement with Citigroup Global Markets Inc. (“CGMI”) providing for the sale of a portion of our ARS. We received approximately $19,313,000 in cash (plus accrued interest) in exchange for $22,600,000 in principal amount of our ARS. As a result, we recorded an additional realized loss on the sale of these ARS of $528,000 during the quarter ended March 28, 2010. As of December 27, 2009, we had recorded an other than temporary realized loss of $2,793,000 on these ARS. For a three-year period, the settlement agreement with CGMI provides us with the option to repurchase some or all of these ARS at the price for which we sold them, and the potential for additional recoveries in the event of issuer redemptions. As part of the settlement agreement, we agreed to dismiss with prejudice an arbitration proceeding between us and CGMI and an affiliate of CGMI relating to these ARS.

In January 2006, we issued $225,000,000 aggregate principal amount of the 3.25% Notes. The 3.25% Notes were issued pursuant to an Indenture dated as of January 25, 2006 (the “Indenture”). Interest on the 3.25% Notes is payable on January 15 and July 15 of each year, which began on July 15, 2006.

We have the right to redeem for cash all or a portion of the 3.25% Notes on or after January 21, 2011 at specified redemption prices, as provided in the Indenture, plus accrued and unpaid interest, if any, to, but excluding, the applicable redemption date. Holders of the 3.25% Notes may require us to purchase all or a portion of their 3.25% Notes for cash on January 15, 2013, January 15, 2016, and January 15, 2021, or in the event of a fundamental change, at a purchase price equal to 100% of the principal amount of the 3.25% Notes to be repurchased plus accrued and unpaid interest, if any, to, but excluding, the purchase date. We may from time to time seek to retire portions of the outstanding 3.25% Notes through cash repurchases or exchanges for the securities in open market purchases, privately negotiated transactions or otherwise.

Under certain circumstances, holders of the 3.25% Notes may convert their 3.25% Notes based on a conversion rate of 27.4499 shares of our common stock per $1,000 principal amount of 3.25% Notes (which is equal to an initial conversion price of approximately $36.43 per share), subject to adjustment. Upon conversion, in lieu of shares of our common stock, for each $1,000 principal amount of

 

27


3.25% Notes a holder will receive an amount in cash equal to the lesser of (i) $1,000 or (ii) the conversion value, determined in the manner set forth in the Indenture, of the number of shares of our common stock equal to the conversion rate. If the conversion value exceeds $1,000, we also will deliver, at our election, cash or common stock or a combination of cash and common stock with respect to the remaining common stock deliverable upon conversion. If a holder elects to convert such holder’s 3.25% Notes in connection with a fundamental change that occurs prior to January 21, 2011, we will pay, to the extent described in the Indenture, a make-whole premium by increasing the conversion rate applicable to such 3.25% Notes.

In May 2008, the Financial Accounting Standards Board issued authoritative guidance for accounting for convertible debt instruments that may be settled in cash upon conversion (including partial cash settlement). This guidance specifies that convertible debt instruments that may be settled in cash upon conversion shall be separately accounted for by allocating a portion of the fair value of the instrument as a liability and the remainder as equity. The excess of the principal amount of the liability component over its carrying amount shall be amortized to interest cost over the effective term. The provisions of this guidance apply to our 3.25% Notes. We adopted the provisions of this guidance beginning in our first quarter of 2010, as discussed in Note 1 to the consolidated financial statements contained in Item 15.

In February 2003, we issued and sold $150,000,000 aggregate principal amount of the 2.25% Notes that matured and were retired on March 15, 2010. During 2009, we spent $89,525,000 to repurchase $104,446,000 par value of our 2.25% Notes on the open market using our available cash and cash equivalents, at varying discounts to face value. Upon completion of the repurchases, the repurchased 2.25% Notes were cancelled. The resulting gain of $14,461,000 is included in our consolidated financial statements.

During the fourth quarter of 2009, we spent $19,987,000 to repurchase $27,500,000 par value of our 3.25% Notes on the open market using our available cash and cash equivalents, at an average discount to face value of approximately 27 percent. At the time of the repurchase the 3.259 Notes had a book value of $23,139,000, which includes the par value of the 3.259 Notes, offset by the remaining debt discount of $4,361,000. We currently have $197,500,000 par value of the 3.25% Notes outstanding. Upon completion of the repurchases, the repurchased 3.25% Notes were cancelled. The resulting gain of $2,792,000 is included in our consolidated financial statements.

During the first and second quarters of 2010, we spent $11,488,000 to repurchase $11,500,000 par value of our 2.25% Notes on the open market using our available cash and cash equivalents. Upon completion of the repurchases, the repurchased 2.25% Notes were cancelled. On the maturity date of the 2.25% Notes, March 15, 2010, we used our available cash and cash equivalents to pay par value of $34,054,000 to retire all of the outstanding 2.25% Notes. None of the 2.25% Notes remain outstanding.

Our suspension assembly business is capital intensive. The disk drive industry experiences rapid technology changes that require us to make substantial ongoing capital expenditures in product and process improvements to maintain our competitiveness. Significant industry technology transitions often result in increasing our capital expenditures. The disk drive industry also experiences periods of increased demand and rapid growth followed by periods of oversupply and subsequent contraction, which also results in fluctuations in our capital expenditures. Cash used for capital expenditures totaled $31,382,000 for 2010, $20,609,000 for 2009 and $65,603,000 for 2008. The decrease from 2008 to 2009 was primarily due to the weakened demand for our suspension assemblies in 2009 and our actions to reduce our overall cost structure and increase our cash position. Capital spending for 2010 was primarily for additional TSA+ flexure production capacity, establishing our Thailand assembly operation and new tooling program. We currently anticipate capital expenditures to be approximately $20,000,000 to $25,000,000 in 2011, primarily for additional TSA+ flexure production capacity and tooling and manufacturing equipment for new process technology and capability improvements, such as DSA suspension assemblies. As the full transition to TSA+ suspensions takes place over the next two to four years, our capital expenditures could increase as we add capacity as needed. Financing of these capital expenditures will be principally from operations, our current cash, cash equivalents, our credit facility or additional financing, if available given current credit market conditions.

Our capital expenditures for the Disk Drive Components Division are planned based on anticipated customer demand for our suspension assembly products, market demand for disk drives, process improvements to be incorporated in our manufacturing operations and the rate at which our customers adopt new generations of higher performance disk drives and next-generation read/write technology and head sizes, which may require new or improved process technologies, such as additive processing to produce flexures for our TSA+ suspensions or DSA suspensions. Capital spending is also based on our ability to fund capital expenditures, as needed, with cash generated from operations, our current cash, cash equivalents, short-term investments, the Credit Facility or additional financing, if available given current capital market conditions.

We manage our capital spending to reflect the capacity that we expect will be needed to meet disk drive industry customer forecasts. However, existing work in process with vendors and lengthy lead times sometimes prevent us from adjusting our capital expenditures to match near-term demand. This can result in underutilization of capacity, which could lower gross profit.

As we develop the market for our InSpectra StO2 System, we will continue to spend money on medical device sales in our BioMeasurement Division. For 2010, our BioMeasurement Division incurred an operating loss of $23,959,000, and we expect the division to continue to incur losses in 2011. We are taking actions expected to reduce annualized costs by approximately $12,000,000 in this division, which will reduce future operating losses. Our future losses, however, along with growing working capital needs as the business grows, will negatively affect our ability to generate cash.

 

28


On May 15, 2009, we entered into an agreement to sell our real property in Sioux Falls, South Dakota and certain related personal property for cash consideration of $12,000,000. The sale closed on July 17, 2009. The sale resulted in a gain of $1,861,000 which was recorded in our fourth quarter of 2009. We closed our Sioux Falls, South Dakota facility at the end of June 2009 and consolidated the related suspension assembly operations into our Eau Claire, Wisconsin and Hutchinson, Minnesota sites.

In 2008, our board of directors approved a share repurchase program authorizing us to spend up to $130,000,000 to repurchase shares of our common stock from time to time in the open market or through privately negotiated transactions. The maximum dollar value of shares that may yet be purchased under the share repurchase program is $72,368,000. We have not repurchased any shares since 2008.

During 2008 and 2009, we entered into contracts to hedge gold commodity price risks through February 2010. As of September 26, 2010, we did not have any outstanding derivative contracts on our consolidated balance sheets. Note 8 to the consolidated financial statements contained in Item 15 for additional information on our derivative instruments.

Contractual Obligations

The following table presents our contractual obligations at September 26, 2010 (in thousands):

 

     Payments Due by Period  
     Total      Less Than
One Year
     One to
Three Years
     Three to
Five Years
     More Than
Five Years
 

Total debt

   $ 198,445       $ 945       $ 197,500       $       $   

Interest expense

     102,730         6,448         12,838         12,838         70,606   

Capital leases

     606         335         271                   

Operating leases

     11,162         4,270         5,504         1,388           
                                            

Total

   $ 312,943       $ 11,998       $ 216,113       $ 14,226       $ 70,606   
                                            

As of September 26, 2010, the liability balance for uncertain tax positions was $7,516,000. We are not able to reasonably estimate in which future periods these amounts will ultimately be settled.

Holders of our $197,500,000 par value outstanding 3.25% Notes may require us to purchase all or a portion of their 3.25% Notes for cash as early as January 15, 2013.

During 2009, we spent $19,987,000 to repurchase $27,500,000 par value of our 3.25% Notes on the open market using our available cash and cash equivalents, at an average discount to face value of approximately 27 percent. At the time of the repurchase the 3.25% Notes had a book value of $23,139,000, which includes the par value of the 3.25% notes, offset by the remaining debt discount of $4,361,000. We currently have $197,500,000 par value of the 3.25% Notes outstanding. Upon completion of the repurchases, the repurchased 3.25% Notes were cancelled. The resulting gain of $2,792,000 is included in our consolidated financial statements.

Critical Accounting Policies

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires estimation and judgment that affect the reported amounts of revenues, expenses, assets and liabilities. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Following are our most critical accounting policies that affect significant areas and involve judgment and estimates. If these estimates differ materially from actual results, the impact to the consolidated financial statements may be material.

Revenue Recognition — We recognize revenue from the sale of our products when persuasive evidence of an arrangement exists, the product has been delivered, the fee is fixed and determinable and collection of the resulting receivable is reasonably assured. Amounts billed to customers for shipping and handling costs associated with products sold are classified as revenue.

For all sales, we use a binding purchase order as evidence of an arrangement. Delivery generally occurs when product is delivered to a common carrier. Certain of our products are delivered on an FOB destination basis. We defer our revenue associated with these transactions until the product has been delivered to the customer’s premises.

We also store Disk Drive Components Division inventory in VMI facilities, which are warehouses located close to the customer’s manufacturing facilities. Revenue is recognized on sales from such facilities upon the transfer of title and risk of loss, following the customer’s acknowledgement of the receipt of the goods.

We also enter into arrangements with customers that provide us with reimbursement for engineering services and specific program capacity to partially offset the costs of our investment. We recognize the associated revenue over the estimated life of the program to which the services and capacity relate.

 

29


Investments — We account for securities available for sale in accordance with Financial Accounting Standards Board (“FASB”) guidance regarding accounting for certain investments in debt and equity securities, which requires that available-for-sale and trading securities be carried at fair value. Unrealized gains and losses deemed to be temporary on available-for-sale securities are reported as other comprehensive income (“OCI”) within shareholders’ equity. Realized gains and losses and decline in value deemed to be other than temporary on available-for-sale securities are included in “(Loss) gain on short- and long-term investments” and “Other income” on our consolidated statements of operations. Trading gains and losses also are included in “(Loss) gain on short- and long-term investments.” Fair value of the securities is based upon quoted market prices in active markets or estimated fair value when quoted market prices are not available. The cost basis for realized gains and losses on available-for-sale securities is determined on a specific identification basis. We classify our securities available-for-sale as short- or long-term based upon management’s intent and ability to hold these investments. In addition, throughout 2009, the FASB issued various authoritative guidance and enhanced disclosures regarding fair value measurements and impairments of securities which help in determining fair value when the volume and level of activity for the asset or liability have significantly decreased and identifying transactions that are not orderly.

Inventory Valuation — Inventories are valued at the lower of cost (first-in, first-out method) or market by analyzing market conditions, current sales prices, inventory costs and inventory balances.

We are dependent on a limited number of customers and a limited number of product programs for each customer. Because our products are custom built, we typically cannot shift work-in-process or finished goods from customer to customer or from one program to another for a particular customer. We evaluate inventory balances for excess quantities and obsolescence on a regular basis by analyzing backlog, estimated demand, inventory on hand, sales levels and other information. We write down excess and obsolete inventory to the lower of cost or market based on the analysis.

Long-Lived Assets — We evaluate the carrying value of long-lived assets, consisting primarily of property, plant and equipment, whenever certain events or changes in circumstances indicate that the carrying amount of these assets may not be recoverable. Such events or circumstances include, but are not limited to, a prolonged industry downturn or significant reductions in projected future cash flows. In assessing the recoverability of long-lived assets, we compare the carrying value to the undiscounted future cash flows the assets are expected to generate. If the total of the undiscounted future cash flows is less than the carrying amount of the assets, the assets will be written down based on the excess of the carrying amount over the fair value of the assets. Fair value would generally be determined by calculating the discounted future cash flows using a discount rate based upon our weighted average cost of capital. Significant judgments and assumptions are required in the forecast of future operating results used in the preparation of the estimated future cash flows. Our impairment analysis for the fourth quarter of 2010 indicated that no charge for impairment was required. Based on our forecast model, there was a cushion in excess of 10% between our expected undiscounted cash flows and the carrying value of our assets. Changes in these estimates could have a material effect on the assessment of long-lived assets.

Income Taxes — We account for income taxes in accordance with FASB guidance on accounting for income taxes. As part of the process of preparing our consolidated financial statements, we are required to estimate our income taxes in each of the jurisdictions in which we operate. This process involves estimating our current tax exposure together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These temporary differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheet. We must then assess the likelihood that our deferred tax assets will be realized based on future taxable income, and to the extent we believe that recovery is not likely, we must establish a valuation allowance. To the extent we establish a valuation allowance or change this allowance in a period, we must include an expense or a benefit within the tax provision in our statement of operations.

Significant judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities and any valuation allowance recorded against our deferred tax assets. Valuation allowances arise due to the uncertainty of realizing deferred tax assets. At September 26, 2010, and September 27, 2009, we had valuation allowances of $168,991,000 and $147,889,000, respectively. The FASB guidance requires that companies assess whether valuation allowances should be established against their deferred tax assets based on the consideration of all available evidence, using a “more likely than not” standard. In making such assessments, significant weight is to be given to evidence that can be objectively verified. A company’s current or previous losses are given more weight than its future outlook. Under the guidance, our three-year historical cumulative loss was a significant negative factor. This loss, combined with uncertain near-term market and economic conditions, reduced our ability to rely on our projections of future taxable income in determining whether a valuation allowance was appropriate. Accordingly, we concluded that a full valuation allowance is appropriate. We will continue to assess the likelihood that our deferred tax assets will be realizable, and our valuation allowance will be adjusted accordingly, which could materially impact our financial position and results of operations.

Other Matters

See Note 1 to the consolidated financial statements contained in Item 15 for a discussion of recent accounting pronouncements.

 

30


Inflation

Management believes inflation has not had a material effect on our operations or on our financial condition. We cannot be sure that our business will not be affected by inflation in the future.

 

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

We have no earnings or cash flow exposure due to market risk on our debt obligations that are subject to fixed interest rates. Interest rate changes, however, would affect the fair market value of this fixed rate debt. At September 26, 2010, we had fixed rate debt of $198,445,000, with a fair market value of approximately $145,614,000.

Our investing activities are guided by an investment policy, which is reviewed at least annually by our board of directors, and whose objectives are preservation and safety of capital, maintenance of necessary liquidity and maximizing of the rate of return within the stated guidelines. Our policy provides guidelines as to the maturity, concentration limits and credit quality of our investments, as well as guidelines for communication, authorized securities and other policies and procedures in connection with our investing activities.

We are exposed to various market risks and potential loss arising from changes in interest rates in connection with our cash, cash equivalents and marketable securities held in investment accounts.

 

Item 8. Financial Statements and Supplementary Data

The financial statements and notes thereto required pursuant to this Item begin on page 39 of this Annual Report on Form 10-K.

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

 

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time period specified in SEC rules and forms. These controls and procedures are also designed to ensure that such information is accumulated and communicated to our management, including our principal executive and principal financial officers, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating disclosure controls and procedures, we have recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives. Management is required to apply judgment in evaluating its controls and procedures.

We performed an evaluation under the supervision and with the participation of our management, including our principal executive and principal financial officers, to assess the effectiveness of the design and operation of our disclosure controls and procedures under the Exchange Act. Based on that evaluation, our management, including our principal executive and principal financial officers, concluded that our disclosure controls and procedures were effective as of September 26, 2010.

 

31


Management’s Report on Internal Controls and Procedures

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act). Our internal control system is designed to provide reasonable assurance to our management and board of directors regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our internal control over financial reporting includes those policies and procedures that:

 

   

pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect our transactions and dispositions of assets;

 

   

provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles in the United States of America, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and

 

   

provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of company assets that could have a material effect on our financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

We performed an evaluation under the supervision and with the participation of our management, including our principal executive and principal financial officers, to assess the effectiveness of the design and operation of our disclosure controls and procedures under the Exchange Act as of September 26, 2010. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control — Integrated Framework. Based on that criteria, our management concluded that our internal control over financial reporting was effective as of September 26, 2010.

Our consolidated financial statements as of and for the year ended September 26, 2010, have been audited by Deloitte & Touche LLP, our independent registered public accounting firm, in accordance with the standards of the Public Company Accounting Oversight Board (United States). Deloitte & Touche LLP has also audited our internal control over financial reporting as of September 26, 2010, as stated in its attestation report included in this Annual Report on Form 10-K.

December 10, 2010

 

/s/ Wayne M. Fortun
President and Chief Executive Officer

/s/ David P. Radloff

Vice President and Chief Financial Officer

 

32


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of

Hutchinson Technology Incorporated:

We have audited the internal control over financial reporting of Hutchinson Technology Incorporated and subsidiaries (the “Company”) as of September 26, 2010, based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Controls and Procedures. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the company’s board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of September 26, 2010, based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements and financial statement schedule as of and for the year ended September 26, 2010, of the Company and our report dated December 10, 2010, expressed an unqualified opinion on those financial statements and financial statement schedule.

/s/ Deloitte & Touche LLP

Minneapolis, Minnesota

December 10, 2010

 

33


PART III

Certain information required by Part III is incorporated by reference from our definitive Proxy Statement for the Annual Meeting of Shareholders to be held on January 20, 2011 (the “Proxy Statement”), which will be filed with the SEC pursuant to Regulation 14A within 120 days after September 26, 2010. Except for those portions specifically incorporated in this Annual Report on Form 10-K by reference to our Proxy Statement, no other portions of the Proxy Statement are deemed to be filed as part of this Annual Report on Form 10-K.

 

Item 10. Directors, Executive Officers and Corporate Governance

Incorporated into this item by reference is the information appearing under the headings “Proposal No. 1—Election of Directors” and “Section 16(a) Beneficial Ownership Reporting Compliance” in our Proxy Statement.

Our executive officers are as follows:

 

Name

   Age     

Position

Wayne M. Fortun

     61       President, Chief Executive Officer and Director

Jeffrey W. Green

     70       Chairman of the Board and Director

David P. Radloff

     51       Vice President and Chief Financial Officer

Connie L. Pautz

     52       Vice President of Human Resources & Corporate Communications

Richard J. Penn

     54       Senior Vice President and President of the BioMeasurement Division

R. Scott Schaefer

     57       Vice President and Chief Technology Officer

Kathleen S. Skarvan

     54       Senior Vice President and President of the Disk Drive Components Division

Mr. Fortun was elected President and Chief Operating Officer in 1983, Chief Executive Officer in May 1996, and is now President and Chief Executive Officer. He has served as a director since 1983. He is also a director of G&K Services, Inc. and C.H. Robinson Worldwide, Inc. Mr. Fortun has been with HTI since 1975.

Mr. Green is one of our co-founders and has served as a director since our formation in 1965. He has been Chairman of the Board since January 1983, and served as our Chief Executive Officer from January 1983 to May 1996.

Mr. Radloff was elected Vice President and Chief Financial Officer in September 2010. He served as Corporate Controller from January 2009 to September 2010. Prior to that, he served as Vice President of Corporate Finance from December 2007 to January 2009 and Chief Information Officer from February 2000 to January 2009. He has been with HTI since 1986.

Ms. Pautz was elected Vice President of Human Resources & Corporate Communications in December 2009. She served as Human Resources Director from January 2009 to December 2009 and as Corporate Communications Director from March 2001 to December 2009. She has been with HTI since 1984.

Mr. Penn was elected Senior Vice President and President of the BioMeasurement Division in April 2007. He was Vice President of Operations from October 2003 to November 2005, and was Senior Vice President and President of the Disk Drive Components Division from November 2005 to April 2007. Mr. Penn has been with HTI since 1981.

Mr. Schaefer was elected Vice President in May 1990 and is now Vice President and Chief Technology Officer. He has been with HTI since 1979.

Ms. Skarvan was elected Senior Vice President and President of The Disk Drive Components Division in December 2010, after having served as Vice President and President of the Disk Drive Components Division since April 2007. She was elected Vice President of Sales and Marketing in October 2003, and was the Vice President of Sales and Marketing, Disk Drive Components Division, from November 2005 to April 2007. Ms. Skarvan has been with HTI since 2002, and also was with HTI from 1980 until 2000.

Executive officers are elected annually by our board of directors and serve a one-year period or until their successors are elected.

None of the above executive officers is related to each other or to any of our directors.

We have adopted a code of ethics, named the Code of Ethics and Conduct, which applies to our chief executive officer, chief financial officer, controller and other employees performing similar functions as designated by our chief executive officer. A copy of our Code of Ethics and Conduct is available on our website at http://www.htch.com. We intend to post on our website any amendments to, or waivers from, our Code of Ethics and Conduct pursuant to the rules of the SEC and the NASDAQ Stock Market.

 

34


 

Item 11. Executive Compensation

Incorporated into this item by reference is the information appearing under the heading “Compensation of Executive Officers,” the information regarding compensation committee interlocks and insider participation under the heading “Corporate Governance” and the information regarding compensation of non-employee directors under the heading “Proposal No. 1 — Election of Directors” in our Proxy Statement.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Incorporated into this item by reference is the information appearing under the headings “Security Ownership of Principal Shareholders and Management” and “Equity Compensation Plan Information” in our Proxy Statement.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

Incorporated into this item by reference is the information regarding director independence under the heading “Proposal No. 1 – Election of Directors” and the information regarding related person transactions under the heading “Corporate Governance” in our Proxy Statement.

 

Item 14. Principal Accountant Fees and Services

Incorporated into this item by reference is the information under “Proposal No. 4 — Ratification of Independent Registered Public Accounting Firm” in our Proxy Statement.

PART IV

 

Item 15. Exhibits and Financial Statement Schedules

 

  (a) Documents Filed as Part of this Annual Report on Form 10-K:

 

  1. Consolidated Financial Statements:

Consolidated Statements of Operations for the fiscal years ended September 26, 2010, September 27, 2009, and September 28, 2008

Consolidated Balance Sheets as of September 26, 2010, and September 27, 2009

Consolidated Statements of Cash Flows for the fiscal years ended September 26, 2010, September 27, 2009, and September 28, 2008

Consolidated Statements of Shareholders’ equity for the fiscal years ended September 26, 2010, September 27, 2009, and September 28, 2008

Notes to Consolidated Financial Statements

Report of Independent Registered Public Accounting Firm

 

  2. Financial Statement Schedules:

Schedule II — Valuation and Qualifying Accounts

All other schedules for which provision is made in the applicable accounting regulations of the SEC are not required under the related instructions or are inapplicable and therefore have been omitted.

 

35


 

  (b) Exhibits:

Unless otherwise indicated, all documents incorporated into this Annual Report on Form 10-K by reference to a document filed with the SEC pursuant to the Exchange Act are located under SEC file number 0-34838.

 

  3.1    Amended and Restated Articles of Incorporation of HTI (incorporated by reference to Exhibit 3.1 to HTI’s Quarterly Report on Form 10-Q for the quarter ended 12/29/02; File No. 0-14709).
  3.2    Restated By-Laws of HTI, as amended December 3, 2008 (incorporated by reference to Exhibit 3.1 to HTI’s Current Report on Form 8-K filed 12/9/08; File No. 0-14709).
  4.1    Instruments defining the rights of security holders. The registrant agrees to furnish the SEC upon request copies of instruments with respect to long-term debt.
  4.2    Rights Agreement dated as of July 29, 2010, between HTI and Wells Fargo Bank, N.A., as Rights Agent (incorporated by reference to Exhibit 1 to HTI’s Registration Statement on Form 8-A, dated 7/30/10).
  4.3    Indenture dated as of 2/24/03 between HTI and LaSalle Bank National Association, as Trustee (incorporated by reference to Exhibit 4.5 to HTI’s Registration Statement on Form S-3, Registration No. 333-104074), and Instrument of Resignation, Appointment and Acceptance dated as of 10/29/08 by and among HTI, LaSalle Bank National Association, as prior trustee, and Wells Fargo Bank, National Association, as successor trustee.
  4.4    Indenture dated as of 1/25/06 between HTI and LaSalle Bank National Association, as Trustee (incorporated by reference to Exhibit 4.1 to HTI’s Current Report on Form 8-K filed 1/26/06; File No. 0-14709), and Instrument of Resignation, Appointment and Acceptance dated as of 10/29/08 by and among HTI, LaSalle Bank National Association, as prior trustee, and Wells Fargo Bank, National Association, as successor trustee.
  4.5    Form of 3.25% Convertible Subordinated Note due 2026 (included as part of Exhibit 4.4).
10.1    Office/Warehouse Lease between OPUS Corporation, Lessor, and HTI, Lessee, dated 12/29/95 (incorporated by reference to Exhibit 10.2 to HTI’s Quarterly Report on Form 10-Q for the quarter ended 3/24/96; File No. 0-14709), First Amendment to Office/Warehouse Lease dated 4/30/96 (incorporated by reference to Exhibit 10.2 to HTI’s Quarterly Report on Form 10-Q for the quarter ended 6/23/96; File No. 0-14709), and Second Amendment to Office/Warehouse Lease between VV Minneapolis, L.P., as successor-in-interest to OPUS Corporation, Lessor, and HTI, Lessee, dated 4/14/04 (incorporated by reference to Exhibit 10.1 to HTI’s Annual Report on Form 10-K for the year ended September 25, 2005; File No. 0-14709).
10.2    Patent License Agreement, effective as of 9/1/94, between HTI and International Business Machines Corporation (incorporated by reference to Exhibit 10.10 to HTI’s Quarterly Report on Form 10-Q/A for the quarter ended 6/25/95; File No. 0-14709).
10.3#    Hutchinson Technology Incorporated Amended and Restated 1996 Incentive Plan (As Amended and Restated October 10, 2008) (incorporated by reference to Exhibit 10.6 to HTI’s Annual Report on Form 10-K for the fiscal year ended 9/28/08; File No. 0-14709).
10.4#    Form of Non-Statutory Stock Option Agreement (Employee) under Hutchinson Technology Incorporated Amended and Restated 1996 Incentive Plan (As Amended and Restated October 10, 2008) (incorporated by reference to Exhibit 10.9 to HTI’s Annual Report on Form 10-K for the fiscal year ended 9/28/08; File No. 0-14709).
10.5#    Form of Incentive Stock Option Agreement (Employee) under Hutchinson Technology Incorporated Amended and Restated 1996 Incentive Plan) (As Amended and Restated October 10, 2008 (incorporated by reference to Exhibit 10.10 to HTI’s Annual Report on Form 10-K for the fiscal year ended 9/28/08; File No. 0-14709).
10.6#    Form of Non-Statutory Stock Option Agreement (Director) under Hutchinson Technology Incorporated Amended and Restated 1996 Incentive Plan) (As Amended and Restated October 10, 2008 (incorporated by reference to Exhibit 10.11 to HTI’s Annual Report on Form 10-K for the fiscal year ended 9/28/08; File No. 0-14709).
10.7#    Form of Restricted Stock Agreement (Director) under Hutchinson Technology Incorporated Amended and Restated 1996 Incentive Plan (incorporated by reference to Exhibit 10.2 to HTI’s Current Report on Form 8-K filed 12/7/04; File No. 0-14709).
10.8#    Separation Agreement with Christina M. Temperante dated September 18, 2007 (incorporated by reference to Exhibit 10.12 to HTI’s Annual Report on Form 10-K for the fiscal year ended 9/30/07; File No. 0-14709).
10.9    Credit Line Account Application and Agreement for Organizations and Business, dated December 19, 2008, by and between HTI and UBS Credit Corp. (incorporated by reference to Exhibit 10.1 to HTI’s Quarterly Report on Form 10-Q for the quarter ended 12/21/2008; File No. 0-14709).
10.10    Addendum to Credit Line Account Application and Agreement, dated December 19, 2008 (incorporated by reference to Exhibit 10.2 to HTI’s Quarterly Report on Form 10-Q for the quarter ended 12/28/2008; File No. 0-14709).
10.11    Addendum to Credit Line Agreement, dated December 19, 2008 (incorporated by reference to Exhibit 10.3 to HTI’s Quarterly Report on Form 10-Q for the quarter ended 12/28/2008; File No. 0-14709).
10.12#    Hutchinson Technology Incorporated Severance Pay Plan (As Amended and Restated Effective July 8, 2010).

 

36


10.13#    Form of Severance and Change in Control Agreement for Senior Executives (incorporated by reference to Exhibit 10.1 to HTI’s Amendment No. 1 to Current Report on Form 8-K/A filed 10/14/2010).
10.14#    Description of Fiscal Year 2011 Annual Cash Incentive Plan of Hutchinson Technology Incorporated (incorporated by reference to Exhibit 10.1 to HTI’s Current Report on Form 8-K filed 10/14/2010).
21.1    List of Subsidiaries.
23.1    Consent of Independent Registered Public Accounting Firm.
24.1    Powers of Attorney.
31.1    Rule 13a-14(a)/15d-14(a) Certification of Chief Executive Officer.
31.2    Rule 13a-14(a)/15d-14(a) Certification of Chief Financial Officer.
32.1    Section 1350 Certifications.

Copies of exhibits will be furnished upon written request and payment of HTI’s reasonable expenses in furnishing the exhibits.

 

# Management contract, compensatory plan or arrangement required to be filed as an exhibit to this Annual Report on Form 10-K.

 

37


SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized, on December 10, 2010.

 

  HUTCHINSON TECHNOLOGY INCORPORATED
By    /s/ Wayne M. Fortun
 

Wayne M. Fortun,

President and Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on December 10, 2010.

 

/s/ Wayne M. Fortun     /s/ David P. Radloff

Wayne M. Fortun,

President and Chief Executive Officer

(Principal Executive Officer) and Director

   

David P. Radloff,

Vice President and Chief Financial Officer

(Principal Financial Officer

and Principal Accounting Officer)

*     *
Martha Goldberg Aronson, Director     Russell Huffer, Director
*     *
Mark A. Augusti, Director     William T. Monahan, Director
*     *
W. Thomas Brunberg, Director     Richard B. Solum, Director
*     *
Jeffrey W. Green, Director     Thomas R. VerHage, Director
*      
Gary D. Henley, Director    

 

* Wayne M. Fortun, by signing his name hereto, does hereby sign this document on behalf of each of the above-named directors of the Registrant pursuant to powers of attorney duly executed by such persons.

 

By    /s/ Wayne M. Fortun
 

Wayne M. Fortun,

Attorney-in-Fact

 

38


CONSOLIDATED STATEMENTS OF OPERATIONS

Hutchinson Technology Incorporated and Subsidiaries

 

     Fiscal Years Ended  
     September 26,
2010
    September 27,
2009
    September 28,
2008
 
     (In thousands, except per share data)  

Net sales

   $ 347,189      $ 408,022      $ 631,619   

Cost of sales

     314,224        400,488        546,139   
                        

Gross profit

     32,965        7,534        85,480   

Research and development expenses

     21,429        26,776        39,711   

Selling, general and administrative expenses

     55,848        54,880        73,303   

Severance and other expenses (Note 1)

     3,674        29,586        1,061   

Litigation charge (Note 1)

                   2,003   

Asset impairment and other charges (Note 1)

            71,809          
                        

Loss from operations

     (47,986     (175,517     (30,598

Other income, net

     2,357        1,536        2,172   

Gain on extinguishment of long-term debt

     6        17,253          

Interest income

     1,311        3,184        10,519   

Interest expense

     (15,876     (19,762     (19,767

(Loss) gain on short- and long-term investments (Note 1)

     (319     4,390        (8,484
                        

Loss before income taxes

     (60,507     (168,916     (46,158

(Benefit) provision for income taxes (Note 3)

     (1,585     (209     60,709   
                  

Net loss

   $ (58,922   $ (168,707   $ (106,867
                        

Basic loss per share

   $ (2.52   $ (7.27   $ (4.38
                        

Diluted loss per share

   $ (2.52   $ (7.27   $ (4.38
                        

Weighted-average common shares outstanding

     23,362        23,214        24,411   
                        

Weighted-average diluted shares outstanding

     23,362        23,214        24,411   
                        

The accompanying notes are an integral part of these consolidated financial statements.

 

39


CONSOLIDATED BALANCE SHEETS

Hutchinson Technology Incorporated and Subsidiaries

 

     September 26, 2010     September 27, 2009  
     (In thousands)  
ASSETS   

Current assets:

    

Cash and cash equivalents

   $ 55,639      $ 106,391   

Short-term investments including $4,174 and $3,031 restricted (Note 1)

     48,899        96,316   

Trade receivables, net

     47,629        63,448   

Other receivables

     7,849        8,445   

Inventories

     53,568        46,878   

Other current assets

     2,353        4,932   
                

Total current assets

     215,937        326,410   

Long-term investments

            24,316   

Property, plant and equipment:

    

Land, buildings and improvements

     225,987        211,529   

Equipment

     771,977        744,417   

Construction in progress

     12,880        14,120   

Less: Accumulated depreciation

     (752,611     (690,730
                

Net property, plant and equipment

     258,233        279,336   

Other assets

     5,542        5,425   
                
   $ 479,712      $ 635,487   
                
LIABILITIES AND SHAREHOLDERS’ EQUITY   

Current liabilities:

    

Current maturities of long-term debt

   $ 1,280      $ 102,804   

Accounts payable

     15,788        17,536   

Accrued expenses

     8,593        11,183   

Accrued compensation

     12,911        13,139   
                

Total current liabilities

     38,572        144,662   

Convertible subordinated notes

     174,920        166,464   

Long-term debt, less current maturities

     271        946   

Other long-term liabilities

     1,271        1,705   

Commitments and contingencies (Notes 2, 5 and 6)

    

Shareholders’ equity:

    

Common stock, $.01 par value, 100,000,000 shares authorized, 23,371,000 and 23,359,000 issued and outstanding

     234        234   

Additional paid-in capital

     422,089        418,572   

Accumulated other comprehensive income

     876        2,503   

Accumulated loss

     (158,521     (99,599
                

Total shareholders’ equity

     264,678        321,710   
                
   $ 479,712      $ 635,487   
                

The accompanying notes are an integral part of these consolidated financial statements.

 

40


CONSOLIDATED STATEMENTS OF CASH FLOWS

Hutchinson Technology Incorporated and Subsidiaries

 

     Fiscal Years Ended  
     September 26, 2010     September 27, 2009     September 28, 2008  
     (In thousands)  

OPERATING ACTIVITIES:

      

Net loss

   $ (58,922   $ (168,707   $ (106,867

Adjustments to reconcile net loss to cash provided by operating activities:

      

Depreciation and amortization

     51,849        76,566        111,856   

Stock-based compensation

     3,462        4,244        5,976   

Provision for deferred taxes (Note 3)

                   62,498   

Loss (gain) on short- and long-term investments (Note 1)

            (4,390     8,484   

Loss (gain) on disposal of assets

     173        (1,762     893   

Asset impairment charge (Note 1)

     3,274        71,640          

Non-cash interest expense

     8,456        8,793        8,075   

Gain on extinguishment of debt

     (6     (17,253       

Litigation charge (Note 1)

                   2,003   

Severance expenses (Note 1)

     1,150                 

Changes in operating assets and liabilities (Note 7)

     4,306        50,169        (2,582
                        

Cash provided by operating activities

     13,742        19,300        90,336   
                        

INVESTING ACTIVITIES:

      

Capital expenditures

     (31,382     (20,609     (65,603

Proceeds from the sale of PP&E

            12,205          

Purchases of marketable securities

     (71,739     (46,883     (960,216

Sales/maturities of marketable securities

     141,445        133,819        983,821   
                        

Cash provided by (used for) investing activities

     38,324        78,532        (41,998
                        

FINANCING ACTIVITIES:

      

Proceeds from issuance of common stock

     55        1,508        8,529   

Proceeds from loan

            55,699          

Repayment of short- and long-term debt

     (102,873     (110,957     (1,346

Repurchase of common stock (Note 9)

                   (57,721
                        

Cash used for financing activities

     (102,818     (53,750     (50,538
                        

Net (decrease) increase in cash and cash equivalents

     (50,752     44,082        (2,200

Cash and cash equivalents at beginning of year

     106,391        62,309        64,509   
                        

Cash and cash equivalents at end of year

   $ 55,639      $ 106,391      $ 62,309   
                        

The accompanying notes are an integral part of these consolidated financial statements.

 

41


CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

Hutchinson Technology Incorporated and Subsidiaries

 

     Common Stock     Additional
Paid-In
Capital
    Accumulated
Other
Comprehensive
Income (Loss)
    Accumulated
Earnings
    Total
Shareholders’
Equity
 
     Shares     Amount          
     (In thousands)  

Balance, September 30, 2007

     26,074      $ 261      $ 452,208      $ 29      $ 180,258      $ 632,756   
                                                

Exercise of stock options

     253        2        5,970            5,972   

Issuance of common stock

     170        2        2,555            2,557   

Stock-based compensation (Note 5)

         5,976            5,976   

Tax provision on stock option exercises

         (483         (483

Repurchase of common stock

     (3,556     (36     (53,402       (4,283     (57,721

Components of comprehensive income:

            

Unrealized gain on securities available for sale, net of income taxes of $0

           139       

Unrealized loss on derivatives, net of income taxes of $0

           (1,037    

Net loss

             (106,867  

Total comprehensive loss

               (107,765
                                                

Balance, September 28, 2008

     22,941      $ 229      $ 412,824      $ (869   $ 69,108      $ 481,292   
                                                

Exercise of stock options

                   32            32   

Issuance of common stock

     418        5        1,472            1,477   

Stock-based compensation (Note 5)

         4,244            4,244   

Components of comprehensive income:

            

Unrealized gain on securities available for sale, net of income taxes of $0

           2,069       

Unrealized gain on derivatives, net of income taxes of $0

           1,303       

Net loss

             (168,707  

Total comprehensive loss

               (165,335
                                                

Balance, September 27, 2009

     23,359      $ 234      $ 418,572      $ 2,503      $ (99,599   $ 321,710   
                                                

Issuance of common stock

     12               55            55   

Stock-based compensation (Note 5)

         3,462            3,462   

Components of comprehensive income:

            

Unrealized loss on securities available for sale, net of income taxes of $0

           (2,027    

Unrealized loss on derivatives, net of income taxes of $0

           (267    

Foreign currency translation, net of income taxes of $0

           667       

Net loss

             (58,922  

Total comprehensive loss

               (60,549
                                                

Balance, September 26, 2010

     23,371      $ 234      $ 422,089      $ 876      $ (158,521   $ 264,678   
                                                

The accompanying notes are an integral part of these consolidated financial statements.

 

42


1. Summary of Significant Accounting Policies

Principles of Consolidation

The consolidated financial statements include the accounts of Hutchinson Technology Incorporated and its subsidiaries (“we,” “our” and “us”), all of which are wholly-owned. All significant intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires estimation and judgment that affect the reported amounts of revenues, expenses, assets and liabilities. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. If these estimates differ materially from actual results, the impact to the consolidated financial statements may be material.

Accounting Pronouncements

Throughout 2009, the Financial Accounting Standards Board (“FASB”) issued various authoritative guidance and enhanced disclosures regarding fair value measurements and impairments of securities which helps in determining fair value when the volume and level of activity for the asset or liability have significantly decreased and in identifying transactions that are not orderly. These provisions were effective for us for the fiscal quarter ended June 28, 2009. The additional disclosures required by these provisions are included within the footnotes below. The adoption of these provisions did not have a material impact on our consolidated financial statements.

In May 2008, the FASB issued authoritative guidance for accounting for convertible debt instruments that may be settled in cash upon conversion (including partial cash settlement). This guidance specifies that convertible debt instruments that may be settled in cash upon conversion shall be separately accounted for by allocating a portion of the fair value of the instrument as a liability and the remainder as equity. The excess of the principal amount of the liability component over its carrying amount shall be amortized to interest cost over the effective term. The provisions of this guidance apply to our 3.25% Convertible Subordinated Notes due 2026 (the “3.25% Notes”), discussed in Note 2 below. We adopted the provisions of this guidance beginning in our first quarter of 2010. This guidance requires us to recognize additional (non-cash) interest expense based on the market rate for similar debt instruments that do not contain a comparable conversion feature.

The adoption of this guidance required us to allocate the original $225,000,000 proceeds received from the issuance of our 3.25% Notes between the applicable debt and equity components. Accordingly, we have allocated $160,584,000 of the proceeds to the debt component of our 3.25% Notes and $40,859,000, net of deferred taxes of $23,557,000, to the equity conversion feature. Subsequently, at September 28, 2008, a full valuation allowance was recorded against our deferred tax assets. During the fourth quarter of 2009, we repurchased $27,500,000 par value of our 3.25% Notes, leaving $197,500,000 par value outstanding. The debt component allocation was based on the estimated fair value of similar debt instruments without a conversion feature as determined by using a discount rate of 8.75%, which represents our estimated borrowing rate for such debt as of the date of our 3.25% Notes issuance. The difference between the cash proceeds associated with our 3.25% Notes and the debt component was recorded as a debt discount with a corresponding offset to additional paid-in-capital, net of applicable deferred taxes, representing the equity conversion feature. The debt discount that we recorded is being amortized over seven years, the expected term of our 3.25% Notes (January 19, 2006 through January 15, 2013), using the effective interest method resulting in additional non-cash interest expense. As of September 26, 2010, the remaining period over which the debt discount will be amortized is approximately two years.

The carrying amounts of our 3.25% Notes included in our consolidated balance sheets were as follows (in thousands):

 

     2010     2009  

Principal balance

   $ 197,500      $ 197,500   

Debt discount

     (22,580     (31,036
                

Convertible subordinated notes, net

   $ 174,920      $ 166,464   
                

We have recorded the following interest expense related to our 3.25% Notes in the periods presented (in thousands):

 

     2010      2009      2008  

Coupon rate of interest (cash interest)

   $ 6,402       $ 7,260       $ 7,272   

Debt discount amortization (non-cash interest)

     8,456         8,793         8,075   
                          

Total interest expense for the 3.25% Notes

   $ 14,858       $ 16,053       $ 15,347   
                          

In March 2008, the FASB issued enhanced disclosure requirements for derivative instruments and hedging activities. The additional disclosures are intended to improve financial standards for derivative instruments and hedging activities by requiring enhanced disclosures to enable investors to better understand their effects on an entity’s financial position, financial performance and cash flows. Entities are

 

43


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

required to provide enhanced disclosures about: how and why an entity uses derivative instruments; how derivative instruments and related hedged items are accounted for; and how derivative instruments and related hedged items affect an entity’s financial position, financial performance and cash flows. This guidance is effective for financial statements issued for fiscal years and interim periods beginning after November 15, 2008. The adoption of this statement did not have a material impact on our consolidated financial statements. The additional disclosures required by this guidance are included in Note 8 below.

In February 2007, the FASB issued authoritative guidance which allows companies to choose to measure certain eligible financial assets and financial liabilities at fair value (the fair value option) to measure specified financial instruments and warranty and insurance contracts at fair value on a contract-by-contract basis, with changes in fair value recognized in earnings each reporting period. On September 29, 2008, we elected the fair value option on our acceptance of the Rights Offering (described in Note 1 below) that was a part of a settlement to resolve pending litigation related to our auction rate securities (“ARS”) portfolio held with UBS (defined in Note 1 below). The resulting valuation of the Rights Offering is included in “Long-term investments” on our consolidated balance sheets. Measuring the Rights Offering at fair value led to greater symmetry between the accounting for the ARS we held with other parties and the Rights Offering and more accurately represented the economics of the two assets.

In September 2006, the FASB issued authoritative guidance that clarifies the definition of fair value, establishes a framework for measuring fair value and expands the disclosures on fair value measurements. This guidance became effective for fiscal years beginning after November 15, 2007, our fiscal year 2009. The adoption of this statement did not have a material impact on our consolidated financial statements. The additional disclosures required by this guidance are included in Note 4 below.

Fiscal Year

Our fiscal year is the fifty-two/fifty-three week period ending on the last Sunday in September. The fiscal years ended September 28, 2008, September 27, 2009, and September 26, 2010, are fifty-two week periods.

Revenue Recognition

We recognize revenue from the sale of our products when persuasive evidence of an arrangement exists, the product has been delivered, the fee is fixed and determinable and collection of the resulting receivable is reasonably assured. Amounts billed to customers for shipping and handling costs associated with products sold are classified as revenue.

For all sales, we use a binding purchase order as evidence of an arrangement. Delivery generally occurs when product is delivered to a common carrier. Certain of our products are delivered on an FOB destination basis. We defer our revenue associated with these transactions until the product has been delivered and accepted to the customer’s premises.

We also store Disk Drive Components Division inventory in “vendor managed inventory,” or VMI, facilities, which are warehouses located close to the customer’s manufacturing facilities. Revenue is recognized on sales from such facilities upon the transfer of title and risk of loss, following the customer’s acknowledgement of the receipt of the goods.

We also enter into arrangements with customers that provide us with reimbursement for engineering services and specific program capacity to partially offset the costs of our investment. We recognize the associated revenue over the estimated life of the program to which the services and capacity relate. The deferred revenue related to these reimbursements as recorded on our consolidated balance sheets as of September 26, 2010, and September 27, 2009, was $1,090,000 and $2,142,000, respectively, included in “Accrued expenses” and $412,000 and $650,000, respectively, included in “Other long-term liabilities.”

Cash and Cash Equivalents

Cash equivalents consist of all highly liquid investments with original maturities of ninety days or less.

Investments

Our short-term investments are comprised of corporate notes, United States government debt securities, certificates of deposit, and commercial paper. We account for securities available for sale in accordance with FASB guidance regarding accounting for certain investments in debt and equity securities, which requires that available-for-sale and trading securities be carried at fair value. Unrealized gains and losses deemed to be temporary on available-for-sale securities are reported as other comprehensive income (“OCI”) within shareholders’ equity. Realized gains and losses and decline in value deemed to be other than temporary on available-for-sale securities are included in “(Loss) gain on short- and long-term investments” on our consolidated statements of operations. Trading gains and losses also are included in “(Loss) gain on short- and long-term investments.” Fair value of the securities is based upon quoted market prices in active markets or estimated fair value when quoted market prices are not available. The cost basis for realized gains and losses on available-for-sale securities is determined on a specific identification basis. We classify our securities available-for-sale as short- or long-term based upon management’s intent and ability to hold these investments. In addition, throughout 2009, the FASB issued various authoritative guidance and enhanced disclosures regarding fair value measurements and impairments of securities which help in

 

44


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

determining fair value when the volume and level of activity for the asset or liability have significantly decreased and in identifying transactions that are not orderly.

A summary of our investments as of September 26, 2010, and September 27, 2009, is as follows:

 

     September 26, 2010  
     Cost Basis      Gross Realized      Gross Unrealized      Recorded Basis  
        Gains      Losses      Gains      Losses     

Available-for-sale securities

                 

Short-term investments

                 

Marketable securities

   $   48,690       $      —       $      —       $    209       $       $   48,899   
     September 27, 2009  
     Cost Basis      Gross Realized      Gross Unrealized      Recorded Basis  
        Gains      Losses      Gains      Losses     

Available-for-sale securities

                 

Short-term investments

                 

Marketable securities

   $ 30,320       $       $       $ 68       $       $ 30,388   

Long-term investments

                 

ARS

     25,200                 3,053         746                 24,316   
                                                     

Total available-for-sale securities

     55,520                 3,053         814                 54,704   

Trading securities

                 

Short-term investments

                 

ARS — secured

     66,125                 4,234                         61,891   

Other

                 

Rights Offering

             4,037                                 4,037   
                                                     
   $ 121,645       $ 4,037       $ 7,287       $ 814       $       $ 120,632   
                                                     

As of September 26, 2010, our short-term investments mature within one year.

Our ARS portfolio had an aggregate par value of $91,325,000 at September 27, 2009. We determined the estimated fair value of our ARS portfolio each quarter. At September 27, 2009, we estimated the fair value of our ARS portfolio to be $90,244,000. As of September 26, 2010, our entire ARS portfolio had been sold or redeemed.

Effective December 19, 2008, we entered into a settlement (the “UBS Settlement”) with UBS AG, UBS Financial Services Inc. and UBS Securities LLC (collectively, “UBS”) that provided liquidity for our ARS portfolio held with UBS and to resolve pending litigation between the parties. The UBS Settlement provided for certain arrangements, one of which was our acceptance of an offer by UBS to issue to us ARS rights (the “Rights Offering”), which allowed us to require UBS to repurchase at par value all of the ARS held by us in accounts with UBS at any time during the period from June 30, 2010, through July 2, 2012 (if our ARS had not previously been sold by us or by UBS on our behalf or redeemed by the respective issuers of those securities). During the fourth quarter of 2010, we exercised the rights issued to us in the Rights Offering for the remaining ARS held by us and subject to the Rights Offering.

As part of the UBS Settlement, we also entered into a loan agreement with UBS Credit Corp. (“UBS Credit”), which provided us with a line of credit (the “UBS Credit Line”) secured only by the ARS we held in accounts with UBS. The proceeds derived from any sales of the ARS we held in accounts with UBS were to be applied to repayment of the UBS Credit Line. As of September 26, 2010, we had repaid all of the UBS Credit Line available to us.

On March 19, 2010, we entered into a settlement agreement with Citigroup Global Markets Inc. (“CGMI”) providing for the sale of a portion of our ARS. We received approximately $19,313,000 in cash (plus accrued interest) in exchange for $22,600,000 in principal amount of our ARS. As a result, we recorded an additional realized loss on the sale of these ARS of $528,000 during the quarter ended March 28, 2010. As of December 27, 2009, we had recorded an other than temporary realized loss of $2,793,000 on these ARS. For a three-year period, the settlement agreement with CGMI provides us with the option to repurchase some or all of these ARS at the price for which we sold them, and the potential for additional recoveries in the event of issuer redemptions. As part of the settlement agreement, we agreed to dismiss with prejudice an arbitration proceeding between us and CGMI and an affiliate of CGMI relating to these ARS.

As of September 26, 2010 and September 27, 2009, we have $4,174,000 and $3,031,000, respectively, of short-term investments that are restricted in use. For September 26, 2010, these amounts covered outstanding letters of credit and a security for our self-insured workers compensation programs. For September 27, 2009, these amounts covered an outstanding letter of credit, a security for our self-insured workers compensation programs and market positions on outstanding gold hedges.

 

45


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

Trade Receivables

We grant credit to our customers, but generally do not require collateral or any other security to support amounts due. Trade receivables of $47,629,000 at September 26, 2010, and $63,448,000 at September 27, 2009, are net of allowances of $372,000 and $499,000, respectively. As of September 26, 2010, allowances of $372,000 consisted of an $119,000 allowance for doubtful accounts and a $253,000 allowance for sales returns. As of September 27, 2009, allowances of $499,000 consisted of a $224,000 allowance for doubtful accounts and a $275,000 allowance for sales returns. Our trade receivables balance declined $15,819,000 from September 27, 2009 due to a significant decrease in net sales during 2010.

We generally warrant that the products sold by us will be free from defects in materials and workmanship for a period of one year or less following delivery to our customer. Upon determination that the products sold are defective, we typically accept the return of such products and refund the purchase price to our customer. We record a provision against revenue for estimated returns on sales of our products in the same period that the related revenues are recognized. We base the allowance on historical product returns, as well as existing product return authorizations. The following table reconciles the changes in our allowance for sales returns under warranties:

 

    Fiscal Year    

  

    Beginning    

Balance

  

Increases in the
    Allowance Related to    

Warranties Issued

  

    Reductions in the    
Allowance for
Returns Under
Warranties

  

    Ending Balance    

2010

   $275    $   868    $   (890)    $253

2009

   $699    $1,158    $(1,582)    $275

Inventories

Inventories are valued at the lower of cost (first-in, first-out method) or market by analyzing market conditions, current sales prices, inventory costs and inventory balances. Inventories consisted of the following at September 26, 2010 and September 27, 2009:

 

     2010      2009  

Raw materials

   $ 24,559       $ 21,069   

Work in process

     10,601         9,990   

Finished goods

     18,408         15,819   
                 
   $ 53,568       $ 46,878   
                 

Property and Depreciation

Property, plant and equipment are stated at cost. Costs of renewals and betterments are capitalized and depreciated. Maintenance and repairs are charged to expense as incurred.

Buildings and leasehold improvements are depreciated on a straight-line basis and equipment is depreciated primarily using straight-line basis for financial reporting purposes. Property is depreciated using primarily accelerated methods for tax reporting purposes. Estimated useful lives for financial reporting purposes are as follows:

 

Buildings

   25 to 35 years

Leasehold improvements

   5 to 10 years

Equipment

   1 to 15 years

We lease some manufacturing equipment that has been treated as a capital lease for accounting purposes. The present value of the minimum quarterly payments resulted in an initial $686,000 lease obligation and related leased asset.

Foreign Currency Translation

Our Thailand operation uses their local currency as its functional currency. Assets and liabilities are translated at exchange rates in effect at the balance sheet date. Income and expense accounts are translated at the average exchange rates during the year. Resulting translation adjustments are recorded as a separate component of accumulated OCI.

Transaction gains and losses that arise from the exchange rate changes on transactions denominated in a currency other than the local currency are included in “Other income, net” in the consolidated statements of operations. We recognized a foreign currency gain of $744,000 in 2010 primarily related to purchases denominated in US dollars made by our Thailand operation.

Engineering and Process Development

Our engineers and technicians are responsible for the implementation of new technologies, as well as process and product development and improvements. Expenditures related to these activities totaled $51,059,000 in 2010, $61,545,000 in 2009 and $75,043,000 in 2008. Of these amounts, $21,429,000 in 2010, $26,776,000 in 2009 and $39,711,000 in 2008 are classified as research and development expenses, with the remainder relating to quality, engineering and manufacturing support, classified as cost of sales.

 

46


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

Severance and Other Expenses

A summary of our severance and other expenses as of September 26, 2010, is as follows:

 

     Severance and
Benefits
    Other Expenses     Total  

Accrual balances, September 30, 2007

   $      $      $   

Restructuring charges

     1,061               1,061   

Cash payments

     (1,061            (1,061

Accrual balances, September 28, 2008

   $      $      $   

Restructuring charges

     28,731        855        29,586   

Cash payments

     (28,731     (855     (29,586

Accrual balances, September 27, 2009

   $      $      $   

Restructuring charges

     3,674               3,674   

Cash payments

     (2,524            (2,524

Accrual balances, September 26, 2010

   $ 1,150      $      $ 1,150   

During the third quarter of 2008, we took actions to reduce operating costs, including eliminating approximately 80 positions company-wide. The workforce reduction resulted in a charge for severance expenses of $1,061,000, which was fully paid during the third quarter of 2008.

In response to weakened demand for suspension assemblies and due to changing and uncertain market and economic conditions, we took actions to reduce our cost structure in 2009. During the first quarter of 2009, we announced a restructuring plan that included eliminating positions company-wide. During January 2009, we eliminated approximately 1,380 positions. The workforce reduction resulted in a charge for severance and other expenses of $19,527,000, which was included in our financial results for the thirteen weeks ended December 28, 2008. As of June 28, 2009, the full amount of that severance had been paid.

During the second quarter of 2009, in response to further weakened demand for suspension assemblies, we took actions to further restructure the company and reduce our overall cost structure in our Disk Drive Components Division. We closed our Sioux Falls, South Dakota, facility at the end of June 2009 and consolidated the related suspension assembly operations into our Eau Claire, Wisconsin, and Hutchinson, Minnesota, sites. The assembly operations consolidation resulted in a net elimination of approximately 220 positions. In addition, we consolidated photoetching operations into our Hutchinson, Minnesota, site and trace operations into our Eau Claire, Wisconsin, site to achieve improvements in efficiency and facility utilization and to reduce operating costs. We also reduced the workforce in our components operation in Eau Claire, Wisconsin, by approximately 100 positions. Our total workforce reductions, including these reductions in Sioux Falls, South Dakota, and Eau Claire, Wisconsin, and the approximately 1,380 positions we eliminated in the first quarter of 2009, total approximately 1,700 positions. The second quarter 2009 workforce reductions resulted in a charge for severance and other expenses of $4,787,000, which was paid by the end of 2009.

During the third quarter of 2009, we took additional actions to further restructure the company to adjust to market conditions and the expected phase out of suspension assembly shipments to our customer, Seagate Technology. The restructuring actions included eliminating approximately 300 additional positions, bringing our overall employment to about 2,500 positions at the end of the third quarter of 2009. The third quarter 2009 workforce reductions resulted in charges for severance and other expenses of $4,894,000 recorded in the third quarter and $378,000 recorded in the fourth quarter of 2009, which were paid by the end of 2009.

During 2009, Other expenses included $855,000 of costs related to the Sioux Falls, South Dakota facility closure and assembly consolidation actions.

During the fourth quarter of 2010, we announced actions to reduce costs and preserve cash, including eliminating approximately 80 positions company-wide. The workforce reduction resulted in a charge for severance expenses of $3,674,000, of which, $1,150,000 remains to be paid.

Asset Impairment

During the first quarter of 2009, we recorded non-cash impairment charges of $32,280,000 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations. The impairment review was triggered by weakened demand for suspension assemblies, uncertain future market conditions and the restructuring plan as discussed above. In response to these conditions, we made structural changes to consolidate some of our component and assembly manufacturing among our sites.

During the second quarter of 2009, in response to further weakened demand for suspension assemblies, we took actions to further restructure the company and reduce our overall cost structure in our Disk Drive Components Division. We closed our Sioux Falls, South Dakota facility at the end of June 2009 and consolidated the related suspension assembly operations into our Eau Claire, Wisconsin and

 

47


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

Hutchinson, Minnesota sites. In addition, we consolidated our Eau Claire, Wisconsin site’s photoetching operations into our Hutchinson, Minnesota site and our Hutchinson, Minnesota site’s trace operations into our Eau Claire, Wisconsin site to achieve improvements in efficiency and facility utilization and to reduce operating costs. As a result of these restructuring actions, we recorded additional non-cash impairment charges of $18,688,000 for the impairment of long-lived assets related to manufacturing equipment in our Disk Drive Components Division’s assembly and component operations.

During the third quarter of 2009, we took additional actions to further restructure the company to adjust to market conditions and the expected phase out of suspension assembly shipments to our customer, Seagate Technology. We recorded additional non-cash impairment charges of $20,841,000 for the impairment of long-lived assets primarily related to assembly manufacturing equipment in our Disk Drive Components Division.

The impairment charges in 2009 were recorded on the line item “Asset impairment charge” within operating expenses due to the assets being deemed excess and no longer utilized due to the restructuring actions discussed above.

During the third quarter of 2010, we recorded non-cash impairment charges of $2,294,000 for the impairment of long-lived assets related to the manufacturing and selling of InSpectra StO2 Systems in our BioMeasurement Division. The impairment review was triggered by slower than expected sales growth based on the current pace of adoption of the InSpectra StO2 System and spending constraints in health care markets world-wide, along with our planned operating changes within the BioMeasurement Division. As we evaluated the impact of these changes on our forecast of future operating results in our BioMeasurement Division, we determined that the recorded values of many of the assets in this division were no longer deemed recoverable. Since these assets are no longer expected to generate future positive cash flows in excess of the recorded values, the assets were impaired but will continue to be used on an ongoing basis. Accordingly, for 2010, we recorded impairment charges related to these assets as shown in the following line items on our consolidated statements of operations:

 

Cost of sales

   $ 1,110,000   

Research and development expenses

     394,000   

Selling, general and administrative expenses

     790,000   
        

Total

   $ 2,294,000   
        

When indicators of impairment exist and assets are held for use, we estimate future undiscounted cash flows attributable to the assets. In the event such cash flows are not expected to be sufficient to recover the recorded value of the assets, the assets are written down to their estimated fair values based on the expected discounted future cash flows attributable to the assets or based on appraisals. Factors affecting impairment of assets held for use include the ability of the specific assets to generate positive cash flows. Changes in any of these factors could necessitate impairment recognition in future periods for other assets held for use.

Litigation Charge

During 2008, we recorded a litigation charge of $2,003,000 related to the settlement of a class action lawsuit. The lawsuit challenged our pay practices pertaining to the time certain production employees spend gowning and ungowning at the beginning and end of their shifts and meal breaks. The charge was comprised of settlement payments to these employees and payment of their attorney’s fees and expenses. The full amount of the litigation has been paid.

Income Taxes

We account for income taxes in accordance with FASB guidance on accounting for income taxes. As part of the process of preparing our consolidated financial statements, we are required to estimate our income taxes in each of the jurisdictions in which we operate. This process involves estimating our current tax exposure together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These temporary differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheets. We must then assess the likelihood that our deferred tax assets will be realized based on future taxable income, and to the extent we believe that recovery is not likely, we must establish a valuation allowance. To the extent we establish a valuation allowance or change this allowance in a period, we must include an expense or a benefit within the tax provision in our consolidated statement of operations.

Significant judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities and any valuation allowance recorded against our deferred tax assets. Valuation allowances arise due to the uncertainty of realizing deferred tax assets. At September 26, 2010, and September 27, 2009, we had valuation allowances of $168,991,000 and $147,889,000, respectively. The FASB guidance requires that companies assess whether valuation allowances should be established against their deferred tax assets based on the consideration of all available evidence, using a “more likely than not” standard. In making such assessments, significant weight is to be given to evidence that can be objectively verified. A company’s current or previous losses are given more weight than its future outlook. Under the guidance, our three-year historical cumulative loss was a significant negative factor. This loss, combined with uncertain near-term market and economic conditions, reduced our ability to rely on our projections of future taxable income in determining whether a

 

48


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

valuation allowance is appropriate. Accordingly, we concluded that a full valuation allowance was appropriate. We will continue to assess the likelihood that our deferred tax assets will be realizable, and our valuation allowance will be adjusted accordingly, which could materially impact our financial position and results of operations.

Earnings per Share

Basic earnings per share is computed by dividing net income by the weighted-average number of common shares outstanding during the year. Diluted earnings per share identifies the dilutive effect of potential common shares using net income available to common shareholders and is computed (i) using the treasury stock method for outstanding stock options and the if-converted method for the $150,000,000 aggregate principal amount of the 2.25% Convertible Subordinated Notes that were retired in March of 2010 (the “2.25% Notes”), and (ii) in accordance with FASB guidance relating to the effect of contingently convertible instruments on diluted earnings per share for the $225,000,000 aggregate principal amount of 3.25% Convertible Subordinated Notes due 2026 (the “3.25% Notes”). A reconciliation of these amounts is as follows:

 

     2010     2009     2008  

Net loss

   $ (58,922   $ (168,707   $ (106,867

Plus: Interest expense on convertible subordinated notes

                     

Less: Additional profit-sharing expense and income tax provisions

                     

Net loss available to common shareholders

   $ (58,922   $ (168,707   $ (106,867
                        

Weighted-average common shares outstanding

     23,362        23,214        24,411   

Dilutive potential common shares

                     

Weighted-average diluted shares outstanding

     23,362        23,214        24,411   
                        

Basic loss per share

   $ (2.52   $ (7.27   $ (4.38

Diluted loss per share

   $ (2.52   $ (7.27   $ (4.38

Options to purchase 3,903,000, 3,570,000 and 3,394,000 shares were not included in the 2010, 2009 and 2008 computations of diluted earnings per share, respectively, because they would have been anti-dilutive.

Diluted loss per share for 2010 excludes potential common shares of 187,000 using the treasury stock method and potential common shares of 667,000 using the if-converted method for the 2.25% Notes, as they were antidilutive. Diluted loss per share for 2009 excludes potential common shares of 80,000 using the treasury stock method and potential common shares of 3,044,000 using the if-converted method for the 2.25% Notes, as they were antidilutive. Diluted loss per share for 2008 excludes potential common shares of 3,346,000 using the treasury stock method and potential common shares of 5,027,000 using the if-converted method for the 2.25% Notes, as they were antidilutive.

Subsequent Events

We evaluated subsequent events after the balance sheet date through the date the consolidated financial statements were issued. We did not identify any additional material events or transactions occurring during this subsequent event reporting period that required further recognition or disclosure in these consolidated financial statements.

2.    Financing Arrangements

Short- and Long-Term Debt

 

     2010     2009  

3.25% Notes

   $ 197,500      $ 197,500   

Debt discount

     (22,580     (31,036

2.25% Notes

            45,554   

Eau Claire building mortgage

     945        2,497   

UBS Credit Line

            55,699   

Capital lease obligation

     606          
                

Total debt

     176,471        270,214   

Less: Current maturities

     (1,280     (102,804
                

Total long-term debt

   $ 175,191      $ 167,410   
                

In January 2006, we issued $225,000,000 aggregate principal amount of the 3.25% Notes, which mature in 2026. The 3.25% Notes were issued pursuant to an Indenture dated as of January 25, 2006 (the “Indenture”). Interest on the 3.25% Notes is payable on

 

49


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

January 15 and July 15 of each year, which began on July 15, 2006. Issuance costs of $6,029,000 were capitalized and are being amortized over seven years in consideration of the holders’ ability to require us to repurchase all or a portion of the 3.25% Notes on January 15, 2013, as described below.

We have the right to redeem for cash all or a portion of the 3.25% Notes on or after January 21, 2011 at specified redemption prices, as provided in the Indenture, plus accrued and unpaid interest, if any, to, but excluding, the applicable redemption date. Holders of the 3.25% Notes may require us to purchase all or a portion of their 3.25% Notes for cash on January 15, 2013, January 15, 2016 and January 15, 2021, or in the event of a fundamental change, at a purchase price equal to 100% of the principal amount of the 3.25% Notes to be repurchased plus accrued and unpaid interest, if any, to, but excluding, the purchase date.

Under certain circumstances, holders of the 3.25% Notes may convert their 3.25% Notes based on a conversion rate of 27.4499 shares of our common stock per $1,000 principal amount of 3.25% Notes (which is equal to an initial conversion price of approximately $36.43 per share), subject to adjustment. Upon conversion, in lieu of shares of our common stock, for each $1,000 principal amount of 3.25% Notes a holder will receive an amount in cash equal to the lesser of (i) $1,000, or (ii) the conversion value, determined in the manner set forth in the Indenture, of the number of shares of our common stock equal to the conversion rate. If the conversion value exceeds $1,000, we also will deliver, at our election, cash or common stock or a combination of cash and common stock with respect to the remaining common stock deliverable upon conversion. If a holder elects to convert such holder’s 3.25% Notes in connection with a fundamental change that occurs prior to January 21, 2011, we will pay, to the extent described in the Indenture, a make-whole premium by increasing the conversion rate applicable to such 3.25% Notes.

During September 2009, we spent $19,987,000 to repurchase $27,500,000 par value of our 3.25% Notes on the open market using our available cash and cash equivalents, at an average discount to face value of approximately 27 percent. At the time of repurchase the notes had a book value of $23,139,000, which includes the par value of the notes, offset by the remaining debt discount of $4,361,000. We have $197,500,000 par value of the 3.25% Notes outstanding. Upon completion of the repurchases, the repurchased 3.25% Notes were cancelled. The resulting gain of $2,792,000 was included in our consolidated financial statements.

In February 2003, we issued and sold $150,000,000 aggregate principal amount of the 2.25% Notes. The remaining outstanding 2.25% Notes matured and were retired on March 15, 2010. During 2009, we spent $89,525,000 to repurchase $104,446,000 par value of our 2.25% Notes on the open market using our available cash and cash equivalents, at varying discounts to face value. After the repurchases, we had $45,554,000 par value of the 2.25% Notes outstanding. Upon completion of the repurchases, the repurchased 2.25% Notes were cancelled. The resulting gain of $14,461,000 is included in our consolidated financial statements.

During 2010, we spent $11,488,000 to repurchase $11,500,000 par value of our 2.25% Notes on the open market using our available cash and cash equivalents. Upon completion of the repurchases, the repurchased 2.25% Notes were cancelled. The resulting gain of $6,000 was included in our consolidated financial statements. On the maturity date of March 15, 2010, we used available cash and cash equivalents to pay par value of $34,054,000 to retire all of the remaining outstanding 2.25% Notes. None of the 2.25% Notes remain outstanding.

During the first quarter of 2006, we purchased the assembly manufacturing building (which we previously leased) at our Eau Claire, Wisconsin, manufacturing site, together with related equipment, for $12,924,000, which included the assumption of a mortgage by us with a 7.15% interest rate that matures in April 2011. At September 26, 2010, the mortgage balance totaled $945,000.

We also lease some manufacturing equipment that has been treated as a capital lease for accounting purposes. The present value of the minimum quarterly payments resulted in an initial $686,000 lease obligation and related leased asset.

Contractual maturities of short- and long-term debt subsequent to September 26, 2010, are as follows:

 

2011

   $ 1,280   

2012

     271   

2013

     197,500   

2014

       

2015

       

Thereafter

       
        
   $ 199,051   
        

 

50


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

3.    Income Taxes

The (benefit) provision for income taxes consists of the following:

 

     2010     2009     2008  

Current:

      

Federal

   $ (2,046   $ (530   $ (1,777

Foreign

     447        307          

State

     14        14        (12

Deferred

                   62,498   
                        
   $ (1,585   $ (209   $ 60,709   
                        

In the fourth quarter of 2008, we recorded a charge of $76,610,000 related to establishing a full valuation allowance against our deferred tax assets. The guidance requires that companies assess whether valuation allowances should be established against their deferred tax assets based on the consideration of all available evidence, using a “more likely than not” standard. In making such assessments, significant weight is given to evidence that can be objectively verified. A company’s current or previous losses are given more weight than its future outlook. Under that standard, our three-year historical cumulative loss was a significant negative factor. This loss, combined with uncertain near-term market and economic conditions, reduced our ability to rely on our projections of future taxable income in determining whether a valuation allowance is appropriate. Accordingly, we concluded that a full valuation allowance is appropriate. We will continue to assess the likelihood that our deferred tax assets will be realizable, and our valuation allowance will be adjusted accordingly, which could materially impact our financial position and results of operations.

The deferred provision (benefit) is composed of the following:

 

     2010     2009     2008  

Asset bases, lives and depreciation methods

   $ 19,637      $ (4,217   $ 11,716   

Reserves and accruals not currently deductible

     (3,489     5,166        (6,175

Tax credits and net operating loss (“NOL”) carryforwards

     (34,189     (58,591     (18,201

Deferred tax liability on 3.25% Notes

     (3,059     (4,831     (3,139

Valuation allowance

     21,100        62,473        78,297   
                        
   $      $      $ 62,498   
                        

A reconciliation of the statutory federal income tax rate to the effective tax rate is as follows:

 

     2010     2009     2008  

Statutory federal income tax rate

     (35.0 )%      (35.0 )%      (35.0 )% 

Effect of:

      

State income taxes, net of federal income tax benefits

                   (1.0

Foreign income taxes, net of federal income tax benefits

     0.8        0.4        0.1   

Valuation allowance on deferred tax assets and/or use of tax credits

     30.9        35.1        165.1   

Other permanent differences

     0.7        (0.4     1.9   

Other adjustments

                   0.1   
                        
     (2.6 )%      0.1     131.2
                        

The following table shows the significant components of our deferred tax assets:

 

     2010     2009  

Current deferred tax assets:

    

Receivable allowance

   $ 132      $ 178   

Inventories

     7,089        3,979   

Accruals and other reserves

     2,652        3,165   

Valuation allowance

     (9,873     (7,322
                

Total current deferred tax assets

              

Long-term deferred tax assets:

    

Property, plant and equipment

     9,543        29,180   

Deferred income

     5,659        4,720   

Tax credits

     30,674        32,912   

NOL carryforwards

     121,269        84,841   

3.25% Notes

     (8,027     (11,086

Valuation allowance

     (159,118     (140,567
                

Total long-term deferred tax assets

              
                

Total deferred tax assets

   $      $   
                

 

51


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. At September 26, 2010, our deferred tax assets included $30,674,000 of unused tax credits, of which $3,468,000 can be carried forward indefinitely and $27,206,000 expire at various dates beginning in 2018. In addition, at September 26, 2010, our deferred tax assets included $121,269,000 of NOL carryforwards that will begin to expire in 2021 if not otherwise used by us. As of September 26, 2010, we had an estimated NOL carryforward of approximately $334,362,000 for United States federal tax return purposes. A valuation allowance of $168,991,000 has been recognized to offset the related deferred tax assets due to the uncertainty of realizing the deferred tax assets before they expire. Gross unrecognized tax benefits as of September 26, 2010 and September 27, 2009 were $7,516,000 and $7,519,000, respectively. For 2010, $6,977,000 of our gross unrecognized tax benefits would decrease our effective tax rate if realized.

A reconciliation of the beginning and ending balances of the total amounts of gross unrecognized tax benefits is as follows

 

     2010  

Gross unrecognized tax benefits at September 27, 2009

   $ 7,519,000   

Gross increases in tax positions for prior year

       

Gross decreases in tax positions for prior year

     (106,000

Gross increases in tax positions for current year

     103,000   

Fiscal 2009 settlements

       

Lapse in statute of limitations

       
        

Gross unrecognized tax benefits at September 26, 2010

   $ 7,516,000   
        

Our policy is to record interest expense and penalties within the provision for income taxes on the consolidated statements of operations. No interest expense or penalties have been included in the gross amount of unrecognized tax benefits due to existing tax credits and NOL carryforwards.

The major jurisdictions in which we file income tax returns are United States federal and various states. In the United States federal jurisdiction we are no longer subject to examination for fiscal years prior to 2007. For state jurisdictions we are no longer subject to examination for fiscal years prior to 2006. Although certain years are no longer subject to examinations by the IRS and various state taxing authorities, NOL carryforwards generated in those years may still be adjusted upon examination by the IRS or state taxing authorities if they either have been or will be used in a future period.

The timing of the resolution of uncertain tax positions is dependent on numerous factors and therefore is highly uncertain; however, we believe it is unlikely that the gross unrecognized tax benefits would materially change in the next 12 months.

4.    Fair Value of Financial Instruments

We follow fair value measurement accounting with respect to (i) nonfinancial assets and liabilities that are recognized or disclosed at fair value in our financial statements on a recurring basis, and (ii) all financial assets and liabilities.

The fair value measurement guidance defines fair value, establishes a framework for measuring fair value and expands disclosure requirements about fair value measurements. Under the guidance, fair value is defined as the price that would be received to sell an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. The guidance also establishes a hierarchy for inputs used in measuring fair value that maximizes the use of observable inputs and minimizes the use of unobservable inputs by requiring that the most observable inputs be used when available. Observable inputs are inputs market participants would use in valuing the asset or liability, developed based on market data obtained from independent sources. Unobservable inputs are inputs that reflect our assumptions about the factors market participants would use in valuing the asset or liability, developed based upon the best information available in the circumstances. The fair value hierarchy prescribed by the guidance is broken down into three levels as follows:

 

Level 1 —

 

Unadjusted quoted prices in an active market for the identical assets or liabilities at the measurement date.

 

Level 2 —

 

Other observable inputs available at the measurement date, other than quoted prices included in Level 1, either directly or indirectly, including:

 

 

•  Quoted prices for similar assets or liabilities in active markets;

•  Quoted prices for identical or similar assets in nonactive markets;

•  Inputs other than quoted prices that are observable for the asset or liability; and

•  Inputs that are derived principally from or corroborated by other observable market data.

Level 3 —

  Unobservable inputs that reflect the use of significant management judgment. These values are generally determined using pricing models for which assumptions utilize management’s estimates of market participant assumptions.

 

52


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

The following table provides information by level for assets and liabilities that are measured at fair value on a recurring basis.

 

     Fair Value Measurements at
September 26, 2010
 
     Level 1      Level 2      Level 3  

Assets

        

Available-for-sale

        

Corporate notes

   $ 17,869       $       $   

US government debt securities

     15,894                   

Certificates of deposit

     11,539                   

Commercial paper

     3,597                   
                          

Total Assets

   $ 48,899       $       $   
                          

The following table reconciles the September 27, 2009 and September 26, 2010 balances for items measured at fair value on a recurring basis in the table above that used Level 3 inputs.

 

     ARS     Rights Offering     Total  

Balances at September 27, 2009

   $ 86,207      $ 4,037      $ 90,244   

Net realized gain included in other income

     3,718        (4,037     (319

Unrealized gain included in OCI

     (2,169            (2,169

Sales and redemptions

     (87,756            (87,756
                        

Balances at September 26, 2010

   $      $      $   
                        

 

     Fair Value Measurements at September 27, 2009  
             Level 1                      Level 2                      Level 3          

Assets

        

Trading securities

        

Marketable securities — ARS

   $       $       $ 61,891   

Available-for-sale

        

Corporate notes

     17,786                   

US government debt securities

     6,177                   

Certificates of deposit

     3,729                   

Commercial paper

     2,696                   

Marketable securities — ARS

                     24,316   

Rights Offering (described in Note 1 above)

                     4,037   

Derivatives

             196           
                          

Total Assets

   $ 30,388       $ 196       $ 90,244   
                          

The following table reconciles the September 28, 2008 and September 27, 2009 balances for items measured at fair value on a recurring basis in the table above that used Level 3 inputs.

 

     ARS     Rights Offering      Total  

Balances at September 28, 2008

   $ 92,166      $       $ 92,166   

Net realized gain included in other income

     353        4,037         4,390   

Unrealized gain included in OCI

     2,169                2,169   

Sales and redemptions

     (8,481             (8,481
                         

Balances at September 27, 2009

   $ 86,207      $ 4,037       $ 90,244   
                         

For receivables, accounts payable and accrued expenses, we believe that the carrying amounts approximate fair value because of their short-term nature.

 

53


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

Cash and Cash Equivalents

The fair value is based on quoted market prices.

Short- and Long-Term Debt

The fair values of our 3.25% Notes and 2.25% Notes are estimated based on the closing market price of the respective Notes as of the end of the fiscal year. The estimated fair values of our short- and long-term debt are as follows:

 

     2010      2009  
     Carrying
Amount
     Fair Value      Carrying
Amount
     Fair Value  

2.25% Notes

   $       $       $ 45,554       $ 44,757   

3.25% Notes

     197,500         144,669         197,500         152,075   

UBS Credit Line

                     55,699         55,699   

Eau Claire building mortgage

     945         945         2,497         2,497   

5.    Employee Benefits

In March 2009, our board of directors approved the suspension of our employee stock purchase plan, effective April 1, 2009. Prior to this date, our employee stock purchase plan provided for the sale of our common stock at discounted purchase prices. The cost per share under this plan was 85% of the lesser of the fair market value of our common stock on the first or last day of the purchase period, as defined.

Stock Options

As of September 26, 2010, we had an option plan under which up to 6,750,000 common shares are reserved for issuance. Under the plan, options may be granted to any employee, including our officers, and to our non-employee directors, and have been granted with an exercise price equal to the closing sale price of a share of our common stock on the NASDAQ Global Select Market on the date the options were granted. Options also may be granted to certain non-employees at a price not less than the closing sale price of a share of our common stock on the NASDAQ Global Select Market on the date the options were granted. Options generally expire ten years from the date of grant or at an earlier date as determined by the committee of our board of directors that administers the plan. Options granted under the plan before November 2005 generally became exercisable in full one year from the date of grant, and options granted since November 2005 generally become exercisable two to three years from the date of grant.

We recorded stock-based compensation expense, included in selling, general and administrative expenses, of $3,462,000, $4,244,000 and $5,976,000 for 2010, 2009 and 2008, respectively. As of September 26, 2010, $3,772,000 of unrecognized compensation costs related to non-vested awards is expected to be recognized over a weighted-average period of approximately 13 months.

We use the Black-Scholes option pricing model to determine the weighted-average fair value of options. The weighted-average fair value of options granted during 2010, 2009 and 2008 was $5.41, $1.89 and $12.72, respectively. The fair value of options at the date of grant and the weighted-average assumptions utilized to determine such values are indicated in the following table:

 

     2010     2009     2008  

Risk-free interest rate

     2.6     1.9     3.6

Expected volatility

     80     60     45

Expected life (in years)

     7.3        7.7        7.8   

Dividend yield

                     

The risk-free interest rate is based on a treasury instrument whose term is consistent with the expected life of our stock options. We considered historical data in projecting expected stock price volatility. We estimated the expected life of stock options and stock option forfeitures based on historical experience.

 

54


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

Option transactions during 2010 are summarized in the following table:

 

     Number of
Shares
    Weighted-Average
Exercise Price ($)
     Weighted-Average
Remaining
Contractual
Life (yrs.)
 

Outstanding at September 27, 2009

     3,570,323        21.08         5.5   

Granted

     1,042,211        7.36      

Exercised

                 

Expired/Canceled

     (701,625     15.73      
             

Outstanding at September 26, 2010

     3,910,909        18.39         5.8   
             

Options exercisable at September 26, 2010

     2,272,003        25.76         3.8   
             

The aggregate intrinsic value at year-end of our stock options (the amount by which the market price of the stock on the date of exercise exceeded the exercise price of the option) outstanding for 2010, 2009 and 2008 was $197,000, $2,601,000 and $0, respectively. The aggregate intrinsic value at year-end of our stock options exercisable for 2010, 2009 and 2008 was $0, $0 and $0, respectively.

The following table summarizes the status of options that remain subject to vesting:

 

     Number of Shares     Weighted-Average
Grant Date Fair
Value ($)
 

Nonvested at September 27, 2009

     1,323,730        7.45   

Granted

     1,042,211        5.46   

Vested

     (550,572     12.80   

Canceled

     (176,464     6.08   
          

Nonvested at September 26, 2010

     1,638,905        5.13   
          

The following table summarizes information about stock options outstanding at September 26, 2010:

 

Range of Exercise

Prices ($)

   Options Outstanding      Options Exercisable  
   Number
Outstanding
     Weighted-
Average
Remaining
Contractual
Life (yrs)
     Weighted-
Average
Exercise
Price ($)
     Number
Exercisable
     Weighted-
Average
Exercise
Price ($)
 

  3.03 –   5.00

     564,150         8.2         3.03                   

  5.01 – 10.00

     865,747         9.2         7.34                   

10.01 – 20.00

     256,460         1.0         18.62         241,460         18.79   

20.01 – 25.00

     979,692         3.6         23.19         979,692         23.19   

25.01 – 30.00

     723,285         6.3         26.80         529,276         27.02   

30.01 – 45.06

     521,575         3.7         32.53         521,575         32.53   
                                            

Total

     3,910,909         5.8         18.39         2,272,003         25.76   
                                            

Employee Benefit Plans

Effective June 2009, we suspended our employer contributions to our defined contribution plan. Prior to the suspension, our contributions to the plan were $4,998,000 in 2009 and $8,986,000 in 2008.

We sponsor a self-insured comprehensive medical and dental plan for qualified employees that is funded by contributions from plan participants and from us. Contributions are made through a Voluntary Employee’s Benefit Association Trust. We recognized expense related to these plans of $13,128,000 in 2010, $18,158,000 in 2009 and $23,902,000 in 2008.

 

55


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

6.    Commitments and Contingencies

Operating and Capital Leases

We are committed under various operating lease agreements. Total rent expense under these operating leases was $4,314,000 in 2010, $9,858,000 in 2009 and $14,134,000 in 2008.

We lease some manufacturing equipment that has been treated as a capital lease for accounting purposes. The present value of the minimum quarterly payments resulted in an initial $686,000 lease obligation and related leased asset.

Future minimum payments for all operating leases and capital leases with initial or remaining terms of one year or more subsequent to September 26, 2010 are as follows:

 

     Operating Leases      Capital Leases  

2011

   $ 4,270       $ 385   

2012

     3,162         263   

2013

     2,342           

2014

     932           

2015

     456           

Thereafter

               
                 

Total minimum lease payments

   $ 11,162       $ 648   
                 

Amount representing interest

  

   $ (42

Present value of minimum lease payments

  

   $ 606   

Legal Proceedings

We and certain users of our products have from time to time received, and may in the future receive, communications from third parties asserting patents against us or our customers which may relate to certain of our manufacturing equipment or products or to products that include our products as a component. In addition, certain of our customers have been sued on patents having claims closely related to products sold by us. If any third party makes a valid infringement claim and a license were not available on terms acceptable to us, our operating results could be adversely affected. We expect that, as the number of patents issued continues to increase, and as we grow, the volume of intellectual property claims could increase. We may need to engage in litigation to enforce patents issued or licensed to us, protect trade secrets or know-how owned by us or determine the enforceability, scope and validity of the intellectual property rights of others. We could incur substantial costs in such litigation or other similar legal actions, which could have a material adverse effect on our results of operations.

We are a party to certain claims arising in the ordinary course of business. In the opinion of our management, the outcome of such claims will not materially affect our current or future financial position or results of operations.

7.    Supplementary Cash Flow Information

 

     2010     2009     2008  

Changes in operating assets and liabilities:

      

Receivables, net

   $ 16,415      $ 37,882      $ 12,751   

Inventories

     (6,690     28,902        (15,276

Other assets

     1,758        3,615        (761

Accounts payable and accrued expenses

     (6,743     (18,927     529   

Other long-term liabilities

     (434     (1,303     175   
                        
   $ 4,306      $ 50,169      $ (2,582
                        

Cash paid (refund) for:

      

Interest (net of amount capitalized)

   $ 14,805      $ 9,994      $ 10,194   

Income taxes

     443        240        (458

Non-cash investing activities:

      

Capital expenditures in accounts payable

     1,683        656        3,149   

Capitalized interest was $1,071,000 in 2010, $589,000 in 2009 and $966,000 in 2008. Interest is capitalized using an overall borrowing rate for assets that are being constructed or otherwise produced for our own use. Interest capitalized during 2010 was primarily for additional TSA+ flexure production capacity, establishing a Thailand assembly operation and tooling and manufacturing equipment for new process technology and capability improvements.

 

56


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

During the first quarter of 2006, we purchased the assembly manufacturing building (which we previously leased) at our Eau Claire, Wisconsin, manufacturing site, together with related equipment, for $12,924,000, which included the assumption of a mortgage by us.

 

Purchase price of building and related equipment

   $ 12,924   

Cash paid for building and related equipment

     (5,069
        

Mortgage assumed

   $ 7,855   
        

At September 26, 2010, the mortgage balance totaled $945,000.

8.    Other Comprehensive Income

Other comprehensive income

The components of accumulated OCI, net of income taxes, are as follows:

 

     September 26,
2010
     September 27,
2009
 

Available-for-sale securities

   $ 209       $ 2,237   

Derivatives

             266   

Foreign currency translation

     667           
                 

Total accumulated other comprehensive income

   $ 876       $ 2,503   
                 

Derivatives

The purpose of our commodity hedging activities is to protect the values of our cash flows that are exposed to commodity price movement and reduce commodity price-related volatility in our consolidated statements of operations. We have established policies governing our use of derivative instruments. It is our policy to enter into derivative transactions only to the extent true exposures exist. We do not use derivative instruments for trading or speculative purposes, nor are we party to any leveraged derivative instruments or any instruments for which the fair market values are not available from independent third parties. We manage counter-party risk by entering into derivative contracts only with major financial institutions with investment grade credit ratings. The terms of certain derivative instruments contain a credit clause under which each party has a right to settle at market if the other party is downgraded below investment grade.

We evaluate hedge effectiveness at inception and on an ongoing basis, taking into account whether the derivatives used in the hedging transaction have been highly effective in offsetting changes in the cash flows of hedged items and whether those derivatives may be expected to remain highly effective in future periods. Effectiveness for cash flow hedges is assessed based on forward rates.

We discontinue hedge accounting when (i) it is determined that the derivative is no longer highly effective in offsetting changes in the cash flows of a hedged item (including hedged items such as firm commitments or forecasted transactions); (ii) the derivative expires, is sold or terminated; (iii) it is no longer probable that the forecasted transaction will occur; or (iv) our management determines that designating the derivative as a hedging instrument is no longer appropriate. The gain or loss on a derivative is generally reclassified to net income immediately upon discontinuation. When hedge accounting is discontinued but the derivative remains outstanding, we carry the derivative at its fair value on the balance sheet and recognize future changes in its fair value as cost of sales.

The fair values of these hedge contracts are recorded on our consolidated balance sheets in “Other current assets” or “Accrued expenses,” as appropriate. The effective portion is reflected in accumulated OCI. The amount is net of tax, with a full valuation allowance recorded against it. The gains and losses on these contracts are recorded in cost of sales as the commodity is consumed. Ineffectiveness is calculated as the amount by which the change in fair value of the derivatives exceeds the change in fair value of the anticipated commodity purchases and is recorded in cost of sales.

During 2008 and 2009, we entered into contracts to hedge gold commodity price risks through February 2010. The contracts essentially established a fixed price for the underlying commodity and were designated and qualified as effective cash flow hedges of purchases of gold. Actual amounts ultimately reclassified to net income are dependent on the average monthly London PM gold fix rates in effect when our outstanding contracts mature.

As of September 26, 2010, we did not have any outstanding derivative contracts on our consolidated balance sheet.

 

57


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

The following table summarizes the gross activity in OCI related to these contracts:

 

     2010     2009  

Beginning of period unrealized gain (loss) in accumulated OCI

   $ 266      $ (1,037

(Increase) decrease in fair value of derivative instruments

     (195     463   

(Loss) gains reclassified from OCI into cost of sales

     (373     1,796   

Gains on dedesignated derivative instruments reclassified from OCI into cost of sales

            571   

Settlements

     302        (1,527
                

End of period unrealized gain in accumulated OCI

   $      $ 266   
                

Foreign Currency Translation

Our Thailand operation uses their local currency as their functional currency. Assets and liabilities are translated at exchange rates in effect at the balance sheet date. Income and expense accounts are translated at the average exchange rates during the year. Resulting translation adjustments are recorded as a separate component of accumulated OCI.

9.    Shareholders’ Equity

Stock Repurchase Program

On February 4, 2008, we announced that our board of directors had approved a share repurchase program authorizing us to spend up to $130,000,000 to repurchase shares of our common stock from time to time in the open market or through privately negotiated transactions. As of September 28, 2008, we had spent $57,632,000 to repurchase 3,600,000 shares at an average price of $16.21. The maximum dollar value of shares that may yet be purchased under the share repurchase plan is $72,368,000. All of our repurchases during 2008 were made in the open market. There were no repurchases during 2009 or 2010.

10.    Share Rights Plan

In July 2010, our board of directors declared a dividend of one common share purchase right for each outstanding share of common stock held by shareholders of record as of the close of business on August 10, 2010. Under certain conditions, each right may be exercised to purchase one-tenth of a share of common stock at an exercise price of $3.00, subject to adjustment. The rights generally will become exercisable after any person or group acquires beneficial ownership of 15% or more of our common stock or announces a tender or exchange offer that would result in that person or group beneficially owning 15% or more of our common stock. If any person or group becomes a beneficial owner of 15% or more of our common stock, each right will entitle its holder (other than the 15% owner) to purchase, at an adjusted exercise price equal to ten times the previous purchase price, shares of our common stock having a market value of two times the right’s adjusted exercise price.

The rights, which do not have voting rights, expire in on August 10, 2020 and may be redeemed by us at a price of $0.001 per right, subject to adjustment, at any time prior to their expiration or a person’s or group’s acquisition of beneficial ownership of at least 15% of our common stock. In certain circumstances, at the option of our Board of Directors, we may exchange the rights for shares of our common stock, delay or temporarily suspend the exercisability of the rights or reduce the stock-ownership threshold of 15% to not less than 10%.

In the event that we are acquired in certain merger or other business-combination transactions, or sell 50% or more of our assets or earnings power, each holder of a right shall have the right to receive, at the right’s adjusted exercise price, common shares of the acquiring company having a market value of twice the right’s adjusted exercise price.

11.    Segment Reporting

We follow the provisions of FASB guidance, which establish annual and interim reporting standards for an enterprise’s business segments and related disclosures about each segment’s products, services, geographic areas and major customers. The method for determining what information to report is based on the way management organizes the operating segments within a company for making operating decisions and assessing financial performance. Our Chief Executive Officer is considered to be our chief operating decision maker.

We have determined that we have two reportable segments: the Disk Drive Components Division and the BioMeasurement Division. The accounting policies of the segments are the same as those described in the summary of significant accounting policies.

 

58


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

The following table represents net sales by product for each reportable segment:

 

     2010      2009      2008  

Net sales:

        

Disk Drive Components Division

        

Suspension assemblies

   $ 337,931       $ 397,942       $ 621,948   

Other products

     6,844         8,325         8,628   
                          

Total Disk Drive Components Division

     344,775         406,267         630,576   

BioMeasurement Division

     2,414         1,755         1,043   
                          
   $ 347,189       $ 408,022       $ 631,619   
                          

The following table represents operating loss for each reportable segment:

 

     2010     2009     2008  

Loss from operations:

      

Disk Drive Components Division

   $ (24,027   $ (152,032   $ (7,936

BioMeasurement Division

     (23,959     (23,485     (22,662
                        
   $ (47,986   $ (175,517   $ (30,598
                        

The following table represents long-lived assets for each reportable segment:

 

     2010      2009      2008  

Long-lived assets:

        

Disk Drive Components Division

   $ 257,739       $ 276,283       $ 411,139   

BioMeasurement Division

     494         3,053         3,949   
                          
   $ 258,233       $ 279,336       $ 415,088   
                          

The following table represents depreciation expenses for each reportable segment:

 

     2010      2009      2008  

Depreciation and amortization expense:

        

Disk Drive Components Division

   $ 50,619       $ 75,132       $ 110,404   

BioMeasurement Division

     1,230         1,434         1,452   
                          
   $ 51,849       $ 76,566       $ 111,856   
                          

Sales to foreign locations were as follows:

 

     2010      2009      2008  

Foreign-based enterprises

   $ 157,611       $ 182,417       $ 263,346   

Foreign subsidiaries of United States corporations

     182,474         217,900         360,843   
                          
   $ 340,085       $ 400,317       $ 624,189   
                          

The majority of these foreign location sales were to the Pacific Rim region. In addition, we had significant sales to United States corporations that used our products in their offshore manufacturing sites.

 

59


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Hutchinson Technology Incorporated and Subsidiaries — (Continued)

 

Revenue assigned based on product shipment location and long-lived assets by geographic area are as follows:

 

     2010      2009      2008  

Revenue:

        

Thailand

   $ 174,627       $ 211,960       $ 360,842   

Hong Kong

     114,541         152,068         215,291   

Japan

             14,299         40,386   

Philippines

     32,725         5,954           

China

     9,365         7,789         6,248   

Malaysia

     7,847         5,940           

United States

     7,104         7,705         7,430   

Other foreign countries

     980         2,307         1,422   
                          
   $ 347,189       $ 408,022       $ 631,619   
                          

Long-lived assets:

        

United States

   $ 242,704       $ 278,334       $ 413,343   

Other foreign countries

     15,529         1,002         1,745   
                          
   $ 258,233       $ 279,336       $ 415,088   
                          

Sales to customers in excess of 10% of net sales are as follow:

 

     2010     2009     2008  

Western Digital Corporation

     43     36     29

SAE Magnetics, Ltd./TDK Corporation

     37        39        34   

Seagate Technology, LLC

     10        18        29   

12.    Summary of Quarterly Information (unaudited)

The following table summarizes unaudited financial data for 2010 and 2009. The price range per share reflects the highest and lowest bids as quoted on the NASDAQ Global Select Market during each quarter.

 

     2010 by Quarter     2009 by Quarter  
     First     Second     Third     Fourth     First     Second     Third     Fourth  

Net sales

   $ 108,256      $ 87,614      $ 77,293      $ 74,026      $ 119,671      $ 79,004      $ 106,105      $ 103,242   

Gross profit (loss)

     20,777        7,315        4,907        (34     (133     (11,774     1,977        17,464   

Income (loss) from operations

     3,129        (11,320     (15,332 )1      (24,463 )2      (77,239 )3      (57,637 )3      (42,783 )3      2,142 3 

(Loss) income before income taxes

     (32     (15,111     (18,419     (26,945     (65,954 )4      (60,116     (44,548 )4      1,702 4 

Net income (loss)

     2,220        (15,590     (18,500     (27,052     (66,219     (59,912     (44,333     1,757   

Net income (loss) per share:

                

Basic

     0.10        (0.67     (0.79     (1.16     (2.88     (2.59     (1.90     0.08   

Diluted

     0.09        (0.67     (0.79     (1.16     (2.88     (2.59     (1.90     0.08   

Price range per share:

                

High

     9.98        11.40        7.98        5.11        11.58        4.30        2.95        8.51   

Low

     5.82        5.96        4.22        2.74        1.80        1.28        1.53        1.81   

 

1

During the third quarter of 2010, we recorded $2,294,000 for asset impairments. The impairments were triggered by slower than expected sales growth based on the current pace of adoption of the InSpectra StO2 System and spending constraints in health care markets world-wide, along with our planned operating changes within the BioMeasurement Division.

 

2

During the fourth quarter of 2010, we recorded $3,674,000 for severance and other costs.

 

3

During the first, second, third, and fourth quarters of 2009, we recorded $19,527,000, $4,787,000, $4,894,000 and $378,000, respectively, for severance and other expenses. In addition, during the first, second and third quarters of 2009, we recorded $32,280,000, $18,688,000 and $20,841,000, respectively, for asset impairments. The impairments were triggered by weakened demand for suspension assemblies and uncertain future market conditions.

 

4

During the first, third and fourth quarters of 2009, we recorded a gain of $12,175,000, $1,923,000 and $3,155,000, respectively, for the extinguishment of long-term debt.

 

60


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of

Hutchinson Technology Incorporated:

We have audited the accompanying consolidated balance sheets of Hutchinson Technology Incorporated and subsidiaries (the “Company”) as of September 26, 2010 and September 27, 2009, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended September 26, 2010. Our audits also included the financial statement schedule listed in the Index at Item 15(a)2. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on the financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company at September 26, 2010 and September 27, 2009, and the results of their operations and their cash flows for each of the three years in the period ended September 26, 2010, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

As discussed in Note 1 to the consolidated financial statements, the Company changed its method of accounting for convertible debt instruments that may be settled in cash upon conversion for all periods presented.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of September 26, 2010, based on the criteria established in Internal Control —Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated December 10, 2010, expressed an unqualified opinion on the Company’s internal control over financial reporting.

/s/ Deloitte & Touche LLP

Minneapolis, Minnesota

December 10, 2010

 

61


SCHEDULE II — VALUATION AND QUALIFYING ACCOUNTS

Hutchinson Technology Incorporated and Subsidiaries

 

     Balance at
Beginning of
Period
     Additions
Charged to Costs
and Expenses
     Other Changes
Add (Deduct)
    Balance at End of
Period
 
     (In thousands)  

2008:

          

Allowance for doubtful accounts receivable

   $ 19       $ 13       $      $ 32   

Reserve for sales returns and allowances

     397         4,046         (3,744 )1      699   
                                  
   $ 416       $ 4,059       $ (3,744   $ 731   
                                  

2009:

          

Allowance for doubtful accounts receivable

   $ 32       $ 192       $      $ 224   

Reserve for sales returns and allowances

     699         1,158         (1,582 )1      275   
                                  
   $ 731       $ 1,350       $ (1,582   $ 499   
                                  

2010:

          

Allowance for doubtful accounts receivable

   $ 224       $ 74       $ (179 )2    $ 119   

Reserve for sales returns and allowances

     275         868         (890 )1      253   
                                  
   $ 499       $ 942       $ (1,069   $ 372   
                                  

 

1

Returns honored and credit memos issued.

 

2

Uncollectible accounts receivable written off.

 

62


ELEVEN-YEAR SELECTED FINANCIAL DATA

Hutchinson Technology Incorporated and Subsidiaries

 

Annual Growth         2010     2009     2008     2007     2006     2005     2004     2003     2002     2001     2000  

5
Year

    10
Year
                           
               

(In thousands, except per share data and number of employees)

(unaudited)

 
   

FOR THE YEAR:

                     
  (11)%        (3 )%   

Net sales

  $ 347,189      $ 408,022      $ 631,619      $ 716,103      $ 721,507      $ 631,581      $ 469,696      $ 498,946      $ 390,694      $ 401,236      $ 459,572   
  (28)%        (1 )%   

Gross profit (loss)

    32,965        7,534        85,480        122,241        144,900        174,851        130,355        154,658        90,417        36,724        36,149   
   

Percent of net sales

    9     2     14     17     20     28     28     31     23     9     8
             

Income (loss) from operations

  $ (47,986   $ (175,517   $ (30,598   $ (18,675   $ 12,770      $ 57,381      $ 38,885      $ 81,483      $ 24,425      $ (64,631   $ (98,416
   

Percent of net sales

    (14 )%      (43 )%      (5 )%      (3 )%      2     9     8     16     6     (16 )%      (21 )% 
             

Net income (loss)

  $ (58,922   $ (168,707   $ (106,867   $ 2,526      $ 17,565      $ 54,881      $ 73,113      $ 64,502      $ 15,002      $ (56,277   $ (73,612
   

Percent of net sales

    (17 )%      (41 )%      (17 )%      0     2     9     16     13     4     (14 )%      (16 )% 
  (31)%        (7 )%   

Capital expenditures

  $ 31,382      $ 20,609      $ 65,603      $ 102,239      $ 247,754      $ 197,123      $ 93,085      $ 52,023      $ 31,916      $ 32,047      $ 64,657   
  (10)%        0  

Research and development expenses

    21,429        26,776        39,711        55,245        52,939        36,829        28,258        14,945        17,663        23,241        21,433   
  (6)%        (6 )%   

Depreciation expenses

    50,751        73,508        105,423        111,796        113,149        70,502        57,377        57,837        61,627        85,454        91,194   
  (36)%        (15 )%   

Cash flow from operating activities

    13,742        19,300        90,336        102,790        110,340        126,776        95,432        131,618        48,091        61,463        69,679   
   

AT YEAR END:

                     
  (10)%        (2 )%   

Receivables

  $ 55,478      $ 71,893      $ 109,775      $ 122,526      $ 109,800      $ 96,200      $ 76,345      $ 65,858      $ 55,953      $ 46,625      $ 64,708   
  0%        5  

Inventories

    53,568        46,878        76,459        61,183        81,298        54,780        35,319        31,290        27,110        21,193        32,516   
  (8)%        (4 )%   

Working capital

    177,365        181,748        301,135        428,623        414,222        275,888        322,911        343,706        244,730        247,074        270,609   
  (6)%        (1 )%   

Net property, plant and equipment

    258,233        279,336        415,088        457,883        472,163        350,520        213,761        176,559        181,494        211,262        283,659   
  (10)%        (3 )%   

Total assets

    479,712        635,487        881,287        1,030,933        1,023,205        799,538        688,392        638,956        562,101        594,940        683,933   
  3%        (3 )%   

Total debt and capital leases

    176,471        270,214        334,752        328,023        321,716        150,000        150,000        150,000        151,374        206,900        233,872   
   

Total debt and capital leases as a percentage of total capitalization

    40     46     41     34     34     21     24     26     30     38     37
  (14)%        (4 )%   

Shareholders’ equity

  $ 264,678      $ 321,710      $ 481,292      $ 632,756      $ 616,672      $ 552,539      $ 473,552      $ 431,375      $ 356,961      $ 338,266      $ 392,489   
   

Return on shareholders’ equity

    (20 )%      (42 )%      (19 )%      0     3     11     16     16     4     (15 )%      (17 )% 
  (14)%        (6 )%   

Number of employees, including production temporaries

    2,546        2,448        4,591        4,699        5,433        5,459        3,911        3,656        3,336        3,454        4,729   
  (2)%        (1 )%   

Shares of stock outstanding

    23,371        23,359        22,941        26,074        25,638        25,450        24,394        25,917        25,355        25,171        24,830   
   

PER SHARE INFORMATION:

                     
             

Net income (loss) — diluted

  $ (2.52   $ (7.27   $ (4.38   $ 0.10      $ 0.67      $ 1.88      $ 2.42      $ 2.21      $ 0.59      $ (2.25   $ (2.97
  (12)%        (3 )%   

Shareholders’ equity (book value)

    11.33        13.77        20.98        24.27        24.05        21.71        19.41        16.64        14.08        13.44        15.81   
   

Price range

                     
  (23)%        (9 )%   

High

    11.40        11.58        27.61        25.15        31.08        42.43        38.40        36.85        27.19        24.44        30.00   
  (36)%        (12 )%   

Low

    2.74        1.28        11.34        18.00        17.69        25.65        21.61        15.21        12.81        13.38        9.38   

 

63