Attached files

file filename
EX-21 - EXHIBIT 21 - MODINE MANUFACTURING COex21.htm
EX-23 - EXHIBIT 23 - MODINE MANUFACTURING COex23.htm
EX-31.1 - EXHIBIT 31.1 - MODINE MANUFACTURING COex31_1.htm
EX-32.1 - EXHIBIT 32.1 - MODINE MANUFACTURING COex32_1.htm


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D. C. 20549

FORM 10-K
 
(Mark One)
 
þ   ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended March 31, 2010

or

o   TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____________ to ____________

Commission file number 1-1373

MODINE MANUFACTURING COMPANY
(Exact name of registrant as specified in its charter)

WISCONSIN
39-0482000
(State or other jurisdiction of incorporation or organization)
(I.R.S. Employer Identification No.)
   
1500 DeKoven Avenue, Racine, Wisconsin
53403
(Address of principal executive offices)
(Zip Code)

Registrant's telephone number, including area code (262) 636-1200

Securities registered pursuant to Section 12(b) of the Act:

Title of each class
Name of each exchange on which registered
   
Common Stock, $0.625 par value
New York Stock Exchange

Securities Registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes o    No þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes o    No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes þ    No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yes o    No o
 


 
 

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large Accelerated Filer o
Accelerated Filer þ
   
Non-accelerated Filer o (Do not check if a smaller reporting company)
Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o    No þ

Approximately 59 percent of the outstanding shares are held by non-affiliates.  The aggregate market value of these shares was approximately $254 million based on the market price of $9.27 per share on September 30, 2009, the last day of our most recently completed second fiscal quarter.  Shares of common stock held by each executive officer and director and by each person known to beneficially own more than 5 percent of the outstanding common stock have been excluded in that such persons may be deemed to be affiliates.  The determination of affiliate status is not necessarily a conclusive determination for other purposes.

The number of shares outstanding of the registrant's common stock, $0.625 par value, was 46,261,554 at June 7, 2010.


An Exhibit Index appears at pages 97 - 100 herein.


DOCUMENTS INCORPORATED BY REFERENCE


Portions of the following documents are incorporated by reference into the parts of this Form 10-K designated to the right of the document listed.


Incorporated Document
Location in Form 10-K
   
   
Proxy Statement for the 2010 Annual
Part III of Form 10-K
Meeting of Shareholders
(Items 10, 11, 12, 13, 14)

 
 

 

TABLE OF CONTENTS

MODINE MANUFACTURING COMPANY - FORM 10-K
FOR THE YEAR ENDED MARCH 31, 2010

     
1
ITEM 1.
   
1
ITEM 1A.
   
10
ITEM 1B.
   
15
ITEM 2.
   
15
ITEM 3.
   
16
ITEM 4.
   
16
     
16
     
17
ITEM 5.
   
17
ITEM 6.
   
18
ITEM 7.
   
19
ITEM 7A.
   
42
ITEM 8.
   
47
ITEM 9.
   
92
ITEM 9A.
   
92
ITEM 9B.
   
92
     
92
ITEM 10.
   
92
ITEM 11.
   
93
ITEM 12.
   
93
ITEM 13.
   
93
ITEM 14.
   
93
     
94
ITEM 15.
   
94
     
95
     
96
     
97

 
(This page intentionally left blank.)
 

PART I
ITEM 1.   BUSINESS.

Modine Manufacturing Company (Modine or the Company) specializes in thermal management systems and components, bringing heating and cooling technology and solutions to diversified global markets.  We are a leading global developer, manufacturer and marketer of heat exchangers and systems for use in on-highway and off-highway original equipment manufacturer (OEM) vehicular applications, and to a wide array of building, industrial, refrigeration and fuel cell markets.  Product lines include radiators and radiator cores, vehicular air conditioning, oil coolers, charge air coolers, heat-transfer packages and modules, building heating, ventilating and air conditioning (HVAC) equipment and exhaust gas recirculation (EGR) coolers.  Our primary customers across the globe are:

- Truck, automobile, bus, and specialty vehicle OEMs;
- Agricultural and construction OEMs;
- Heating and cooling OEMs;
- Construction contractors;
- Wholesalers of plumbing and heating equipment; and
- Fuel cell manufacturers.

We focus our development efforts on solutions that meet the pressing heat transfer needs of OEMs and other customers within the commercial vehicle, construction, agricultural and commercial HVAC industries and, more selectively, within the automotive industry.  Our products and systems typically are aimed at solving complex heat transfer challenges requiring effective thermal management.  The typical demands are for products and systems that are lighter weight, more compact, more efficient and more durable to meet ever increasing customer standards as they work to ensure compliance with increasingly stringent global emissions requirements.  Our Company’s heritage provides a depth and breadth of expertise in thermal management which combined with our global manufacturing presence, standardized processes, and state-of-the-art technical centers and wind tunnels, enables us to rapidly bring customized solutions to customers at the best value.

History

Modine was incorporated under the laws of the State of Wisconsin on June 23, 1916 by its founder, Arthur B. Modine.  Mr. Modine’s “Spirex” radiators became standard equipment on the famous Ford Motor Company Model T.  When he died at the age of 95, A.B. Modine had been granted a total of 120 U.S. patents for heat transfer innovations.  The standard of innovation exemplified by A.B. Modine remains the cornerstone of Modine today.

Terms; Year References

When we use the terms “Modine,” “we,” “us,” the “Company,” or “our” in this report, unless the context requires otherwise, we are referring to Modine Manufacturing Company and its subsidiaries.  Our fiscal year ends on March 31.  All references to a particular year mean the fiscal year ended March 31 of that year, unless indicated otherwise.

Business Strategy and Results

Modine focuses on thermal management leadership and highly engineered product and service innovations for diversified, global markets and customers.  We are committed to enhancing our presence around the world and serving our customers where they are located.  We create value by focusing on customer partnerships and providing innovative solutions for our customers' thermal problems.

Modine’s strategy for improved profitability is grounded in diversifying our markets and customer base, differentiating our products and services, and partnering with customers on global OEM platforms.  Modine’s top five customers are in three different markets – automotive, truck and off-highway – and its ten largest customers accounted for approximately 57 percent of the Company’s fiscal 2010 sales, compared to 59 percent in fiscal 2009.  In fiscal 2010, 60 percent of total revenues were generated from sales to customers outside of the U.S., 56 percent of which were generated by Modine’s international operations and 4 percent of which were generated by exports from the U.S.  In fiscal 2009, 62 percent of total revenues were generated from sales to customers outside of the U.S., with 57 percent generated by Modine’s international operations and 5 percent generated by exports from the U.S.


For fiscal 2010, the Company reported revenues from continuing operations of $1.16 billion, a 17 percent decrease from $1.41 billion in fiscal 2009.  For the first half of fiscal 2009, the Company recorded relatively strong sales of $828.4 million.  However, the global economic recession dramatically reduced our sales in the third quarter of fiscal 2009 to $325.6 million and further reduced our sales to $254.8 million in the fourth quarter of fiscal 2009.  In conjunction with this dramatic decline in volumes, combined with impairment and restructuring charges recorded during fiscal 2009, the Company reported a loss from continuing operations of $103.6 million in fiscal 2009.  In the first quarter of fiscal 2010, the Company’s sales remained depressed at $253.6 million.  Since that point, our sales have shown three quarters of sequential improvement, with sales of $324.9 million recorded in the fourth quarter of fiscal 2010.  We are experiencing a slow, but steady improvement in our business levels since the bottom of the recession in the fourth quarter of fiscal 2009.  However, business volumes continue to remain significantly below pre-recessionary volumes experienced in the first half of fiscal 2009.

In response to the declining business and market conditions, the Company focused on its four-point plan, implementing a number of cost and operational efficiency measures designed to improve our longer-term competitiveness:

 
·
Manufacturing realignment – In fiscal 2008, we announced the closures of the Camdenton, Missouri; Pemberville, Ohio; and Logansport, Indiana facilities within the Original Equipment – North America segment and the Tübingen, Germany manufacturing facility within the Original Equipment – Europe segment.  In addition, in October 2009 we announced the closure of the Harrodsburg, Kentucky facility within the Original Equipment – North America segment.  The Pemberville and Tübingen closures have been completed, the Logansport and Harrodsburg closures are anticipated to be completed in the first quarter of fiscal 2011, and the Camdenton closure is anticipated to be completed by the end of fiscal 2011.  In addition, during fiscal 2009, we implemented a significant reduction of direct and indirect costs in our manufacturing facilities.  The reduction in manufacturing costs contributed to an improvement in our gross margin from 13.3 percent in fiscal 2009 to 14.6 percent in fiscal 2010 despite the year-over-year decline in sales volumes.

 
·
Portfolio rationalization – The Company’s business structure is organized around global product lines and a regional operating model.  The Company evaluated product lines within and across the regions to assess them relative to Modine’s competitive position and the overall business attractiveness in order to identify those lower margin product lines that may be divested or exited.  The Company implemented an action plan to deemphasize its automotive module business.  During fiscal 2010, we significantly decreased its exposure to the vehicular heating, ventilation and air conditioning (“HVAC”) business with the sale of our South Korean operation and announced closure of our Harrodsburg, Kentucky facility.  In addition, we sold our 50 percent ownership of Anhui Jianghaui Mando Climate Control Co. Ltd. and our 41 percent investment in Construction Mechaniques Mota, S.A. during the year.

 
·
Capital allocation – The Company’s capital allocation process is designed to allocate capital spending to the product lines and customer programs that will provide the highest return on investment.  Under this process, capital spending was limited to $60.3 million in fiscal 2010, down from $103.3 million in fiscal 2009.  Our capital spending will continue to be limited under this process to $70.0 million in fiscal 2011.
 
 
·
Selling, general and administrative (“SG&A”) cost containment – During fiscal 2009, the Company completed a global workforce reduction, focusing on the realignment of our corporate and regional headquarters.  The global workforce reduction was enabled by the portfolio rationalization and the phase out of certain product lines.  Through this process, our SG&A costs were reduced from $199.6 million in fiscal 2009 to $157.5 million in fiscal 2010.

These actions contributed to a significant improvement in our results from continuing operations from a loss of $103.6 million, or a loss of $3.23 per diluted share in fiscal 2009 to a loss of $20.3 million, or a loss of $0.52 per diluted share in fiscal 2010.  While our results improved substantially year-over-year, the Company still generated a loss from continuing operations due to the low business volumes that have not yet recovered from the global recession.

On September 30, 2009, we completed a public offering of 13.8 million shares of our common stock with cash proceeds of $92.9 million after deducting underwriting discounts, commissions, legal, accounting and printing fees.  The proceeds from this offering along with proceeds from the sale of the South Korean operation and the disposition of assets were used to substantially reduce our outstanding indebtedness.  Outstanding indebtedness decreased $110.0 million from the March 31, 2009 balance of $249.2 million to $139.2 million at March 31, 2010.


Our investment in research and development (“R&D”) in fiscal 2010 was $56.9 million, or 4.9 percent of sales, compared to $73.2 million, or 5.2 percent of sales, in fiscal 2009.  This level of investment reflects the Company’s continued commitment to R&D in an ever-changing market, balanced with a near-term focus on preserving cash and liquidity through more selective capital investment in order to weather the continued effects of the global recession.  Consistent with the streamlining of the Company’s product portfolio, our current R&D is focused primarily on company-sponsored development in the areas of powertrain cooling, engine products and commercial HVAC products.

Discontinued Operations

During fiscal 2009, the Company announced the intended divestiture of its South Korean-based HVAC business and presented it as held for sale and as a discontinued operation in the consolidated financial statements for all periods presented.  The South Korean-based HVAC business was sold on December 23, 2009 for net cash proceeds of $10.5 million, resulting in a loss on sale of $0.6 million.  On May 1, 2007, the Company announced it would explore strategic alternatives for its Electronics Cooling business and presented it as held for sale and as a discontinued operation in the consolidated financial statements for all periods presented.  The Electronics Cooling business was sold on May 1, 2008 for $13.2 million, resulting in a gain on sale of $2.5 million.  Reported net loss for fiscal 2010, 2009 and 2008 was $29.3 million, $108.6 million and $68.6 million, respectively, or a loss per fully diluted share of $0.75, $3.39 and $2.15, respectively.

Products

The Company offers a broad line of products that can be categorized generally as a percentage of net sales as follows:

   
Fiscal 2010
   
Fiscal 2009
 
             
Modules/Packages*
    32 %     30 %
Oil Coolers
    14 %     16 %
Radiators
    13 %     16 %
Building HVAC
    12 %     11 %
Miscellaneous
    10 %     7 %
Charge-Air Coolers
    8 %     9 %
Exhaust Gas Recirculation ("EGR") Coolers
    7 %     7 %
Vehicular Air Conditioning Parts
    4 %     4 %

*Typically include components such as radiators, oil coolers, charge air coolers, condensers and other purchased components.

Competitive Position

We compete with several manufacturers of heat transfer products, some of which are divisions of larger companies.  The markets for the Company's products are increasingly competitive and have changed significantly in the past few years.  The Company's traditional OEM customers in the U.S. and Europe are faced with dramatically increased international competition and have expanded their worldwide sourcing of parts to compete more effectively with lower cost imports.  These market changes have caused the Company to experience competition from suppliers in other parts of the world that enjoy economic advantages such as lower labor costs, lower healthcare costs, and lower tax rates.  In addition, our customers continue to ask the Company, as well as their other primary suppliers, to participate in R&D, design, and validation responsibilities.  We expect this combined work effort to result in stronger customer relationships and more partnership opportunities for the Company.

Business Segments

The Company has assigned specific businesses to a segment based principally on defined markets and geographical locations.  Each Modine segment is managed at the regional vice president or managing director level and has separate financial results reviewed by its chief operating decision makers.  These results are used by management in evaluating the performance of each business segment, and in making decisions on the allocation of resources among our various businesses.  Our chief operating decision makers evaluate segment performance with an emphasis on gross margin, and secondarily based on operating income of each segment, which includes certain allocations of Corporate SG&A expenses.


During the first quarter of fiscal 2010, we implemented certain management reporting changes resulting in the transfer of support department costs originally included in Corporate and administrative into the Original Equipment – North America segment.  During the second quarter of fiscal 2010, we implemented certain management reporting changes resulting in the realignment of the Fuel Cell segment into the Original Equipment – North America segment.  The previously reported results for the Original Equipment – North America segment have been retrospectively adjusted to reflect these changes.  Additional information about Modine’s business segments, including sales and assets by geography, is set forth in Note 25 of the Notes to Consolidated Financial Statements.

Original Equipment – Asia, Europe and North America Segments

The continuing globalization of the Company's OEM customer base has led to the necessity of viewing Modine’s strategic approach, product offerings and competitors on a global basis.  This trend offers significant opportunities for Modine with its market positioning, including presence in key global markets (U.S., Europe, China and India) and a global product-based organization with expertise to solve technical challenges.  At the same time, Modine is small enough to stay nimble and respond quickly to customer expectations.  Modine is recognized as having strong technical support, product breadth and the ability to support global standard designs for its customers.

The Company's main competitors, Behr GmbH & Co. K.G., Dana Corporation, Visteon Corporation, Denso Corporation, Delphi Corporation, T.Rad Co. Ltd., Honeywell Thermal Div., Tokyo Radiator Co., Ltd (Calsonic), Valeo SA and TitanX (former Valeo Heavy Duty group now owned by EQT), have a worldwide presence.  Increasingly, the Company faces competition as these competitors expand their product offerings and manufacturing footprints through expansion into low cost countries and low cost country sourcing initiatives.

Specifically, the Original Equipment – North America, Europe and Asia segments serve the following markets:

Commercial Vehicle

Products – Powertrain cooling (“PTC”) (engine cooling modules, radiators, charge-air-coolers, condensers, fan shrouds, and surge tanks); on-engine cooling (exhaust gas recirculation (“EGR”) coolers, engine oil coolers, fuel coolers, charge-air-coolers and intake air coolers); oil coolers (transmission oil coolers and power steering coolers); and fuel coolers

Customers – Commercial, medium and heavy duty truck and engine manufacturers; bus; and specialty vehicle manufacturers

Market Overview – We continued to see a weak North American market for commercial vehicles despite being in mid-cycle between emissions legislation.  The significant drop in the global economy in the last two quarters of fiscal 2009 contributed to low production and sales levels not seen in many years in both North America and Europe.  Sales volumes in these markets have remained at these very low levels throughout fiscal 2010.

Other trends influencing the market include the consolidation of major customers into global entities emphasizing the development of global vehicle platforms in order to leverage and reduce development costs and distribution methods.  The emissions regulations and timelines are driving the advancement of product development worldwide and creating demand for incremental thermal transfer products.  At the same time, OEMs expect greater supplier support at lower prices and seek high technology/low cost solutions for their thermal management needs.  In general, this drives a deflationary price environment.

Primary Competitors – Behr GmbH & Co. K.G.; TitanX, Bergstrom, Inc.; T.Rad Co. Ltd.; Tokyo Radiator Co.; Ltd. (Calsonic); Honeywell Thermal Div.; Dayco Ensa SA

Automotive

Products – Powertrain cooling (engine cooling modules, radiators, condensers, charge-air-coolers, auxiliary cooling (power steering coolers and transmission oil coolers), component assemblies, radiators for special applications) and on-engine cooling (EGR coolers, engine oil coolers, fuel coolers, charge-air-coolers and intake air coolers)


Customers – Automobile, light truck and engine manufacturers

Market Overview – Modine decided to deemphasize portions of the automotive business due to a variety of factors, among them the cost and risk of enormous capital outlays to maintain a scale cost position, the inherent over-capacity in this market segment, and the anticipation of better returns in other markets.  We will continue to support the automotive marketplace with components where complementary Modine technology can be applied to an automotive environment at reasonable returns.  This means moving away from the niche position we enjoyed with cooling modules in the light vehicle segment.  Continued select component supply as a Tier 2 supplier may carry on for some time.

Primary Competitors – Behr GmbH & Co. K.G.; Dana Corporation; Delphi Corporation; Denso Corporation; T.Rad Co. Ltd.; Tokyo Radiator Co.; Ltd. (Calsonic) and Visteon Corporation

Off-Highway

Products – Powertrain cooling (engine cooling modules, radiators, condensers, charge-air-coolers, fuel coolers); auxiliary coolers (power steering coolers and transmission oil coolers); and on-engine cooling (EGR coolers, engine oil coolers, fuel coolers, charge-air-coolers and intake air coolers)

Customers – Construction and agricultural equipment, engine manufacturers and industrial manufacturers of material handling equipment, generator sets and compressors

Market overview – The slowing of the global economy, driven by the steep decline in housing starts and tight credit, has depressed off-highway equipment orders.  The agriculture market has seen a decline in orders as concerns about the overall economy dampened investment in large agriculture equipment.

Overall market trends include a migration toward global machine platforms, driving the multi-region assembly of a common design platform with low cost country sourcing for certain components.  Additionally, fixed emissions regulations and timelines are driving the advancement of product development in both of these markets.  OEMs are rapidly expanding into Asia and prefer suppliers with local production capabilities.  Modine is recognized as having strong technical support, product breadth, and the ability to support global standard designs of its customers.

Primary Competitors – Adams Thermal Systems Inc.; AKG; Delphi Corporation; Denso Corporation; Honeywell Inc.; Zhejiang Yinlun Machinery Co., Ltd.; ThermaSys Corp.; T. Rad Co., Ltd.; Tokyo Radiator Co., Ltd. (Calsonic); Doowon and Donghwan

Fuel Cell

Products – Comprised of heat exchangers, non-typical highly integrated thermal management systems, reactor subsystems and reformer (or fuel processing) components for steam methane reforming, auto-thermal reactors and catalytic partial oxidation systems.  These products are used in both the solid oxide fuel cell (“SOFC”) and proton exchange membrane (“PEM”) technologies.

Customers – The fuel cell group works with targeted customers in the fuel cell or fuel processing industries where close collaborative relationships are formed.  Our customers are developing fuel cell, hydrogen generation and hydrogen infrastructure products that are dependent on thermodynamic and catalytic processes and require Modine’s expertise to provide optimal solutions to their unique thermal management challenges.  One of these customers is Ceres Power, a UK-based developer of micro-CHP (combined heat and power) fuel cell systems used in homes.

Market Overview – Markets served by our customers consist of stationary distributed power generation (primary power applications); micro-CHP (combined heat and power); mobile power (passenger cars, fleet vehicles and industrial vehicles); portable power (man-portable and auxiliary power units for on-board supplementary vehicle power); fuel processing; and the hydrogen infrastructure (refueling stations and on-site hydrogen generation).  Modine has a global presence in these markets and is perceived by our customers as the one of the innovation and technology leaders.

Primary Competitors – Dana Corporation


Commercial Products

Products – Unit heaters (gas-fired, hydronic, electric and oil-fired); duct furnaces (indoor and outdoor); infrared units (high intensity and low intensity); hydronic products (commercial fin-tube radiation, cabinet unit heaters, and convectors); roof mounted direct- and indirect-fired makeup air units; unit ventilators; close control units for precise temperature and humidity control applications; chiller units; ceiling cassettes; condensing units and coils for heating, refrigeration, air conditioning and vehicular applications

Customers – Heating and cooling equipment manufacturers; construction contractors; wholesalers of plumbing and heating equipment; installers; and end users in a variety of commercial and industrial applications, including banking and finance, education, transportation, telecommunications, entertainment arenas, pharmaceuticals, electronics, hospitals, defense, petrochemicals, and food and beverage processing

Market Overview – Commercial Products has strong sales in gas unit heaters, coil products and room heating and cooling units.  Efficiency legislation, lower noise requirements, and higher energy costs are driving market opportunities.

Primary Competitors – Lennox International Inc. (ADP); Luvata (Heatcraft / ECO); Thomas & Betts Corp. (Reznor); Mestek Inc. (Sterling); Emerson Electric Company (Liebert Hiross); United Technologies Corporation (Carrier); Johnson Controls, Inc. (York); and McQuay International

South America

Products – Construction and agricultural applications, automotive OEM and industrial applications, aftermarket radiators, charge-air-coolers, oil coolers, auxiliary coolers (transmission, hydraulic and power steering) and engine cooling modules

Customers – Commercial, medium and heavy duty truck and engine manufacturers; bus; and specialty vehicle manufacturers, automobile, light truck vehicle and engine manufacturers; construction and agricultural equipment,  engine manufacturers and industrial manufacturers of material handling equipment; generator sets and compressors

Market Overview – South America provides heat exchanger products to a variety of markets in the domestic Brazilian market as well as for export to North America and Europe.  This segment provides products for on-highway and off-highway markets, automotive OEMs and industrial applications.  South America also provides products to the Brazilian, North American and European aftermarkets for both automotive and commercial applications.

Primary Competitors – Behr GmbH & Co. A.G.; Valeo SA; Denso Corporation and Delphi Corporation
 
 
Geographical Areas

We maintain administrative organizations in three regions - North America, Europe and Asia - to facilitate financial and statutory reporting and tax compliance on a worldwide basis and to support the business units.  Our products are manufactured in the following countries:

North America
Europe
South America
Africa
Asia/Pacific
         
Mexico
Austria
Brazil
South Africa
China
United States
Germany
   
India
 
Hungary
   
Japan
 
Italy
   
South Korea
 
The Netherlands
     
 
United Kingdom
     

Our non-U.S. subsidiaries and affiliates manufacture and sell a number of vehicular and industrial products similar to those produced in the U.S.  In addition to normal business risks, operations outside the U.S. are subject to other risks such as changing political, economic and social environments, changing governmental laws and regulations, currency revaluations and volatility, and market fluctuations.

Exports

The Company exports from North America to foreign countries and receives royalties from foreign licensees.  Export sales as a percentage of net sales were 4 percent for fiscal 2010 and 5 percent for fiscal 2009 and 2008.  Royalties from foreign licenses were $3.3 million, $4.1 million and $4.7 million for fiscal 2010, 2009 and 2008, respectively.


Modine believes its international presence has positioned the Company to share profitably in the anticipated long-term growth of the global vehicular, commercial and industrial markets.  Modine is committed to increasing its involvement and investment in international markets in the years ahead.

Foreign and Domestic Operations

Financial information relating to the Company's foreign and domestic operations is included in Note 25 of the Notes to Consolidated Financial Statements.

Customer Dependence

Ten customers accounted for approximately 57 percent of the Company's sales in fiscal 2010.  These customers, listed alphabetically, were: BMW; Caterpillar Inc.; Daimler AG; Deere & Company; General Motors; MAN Truck & Bus; Navistar; Oshkosh Corporation; Volkswagen AG and Volvo Group.  In fiscal 2010, 2009 and 2008, BMW was the only customer that accounted for ten percent or more of the Company’s sales.  Generally, goods are supplied to these customers on the basis of individual purchase orders received from them.  When it is in the customer's and the Company's best interests, the Company utilizes long-term sales agreements with customers to minimize investment risks and also to provide the customer with a proven source of competitively priced products.  These contracts are on average three years in duration and may include built-in pricing adjustments.  In certain cases, our customers have requested additional pricing adjustments beyond those included in these long-term contracts.

Backlog of Orders

The Company's operating units maintain their own inventories and production schedules.  Current production capacity is capable of handling the sales volumes expected in fiscal 2011.

Raw Materials

Aluminum, nickel, brass and steel, all essential to the business, are purchased from several domestic and foreign producers.  In general, the Company does not rely on any one supplier for these materials which are, for the most part, available from numerous sources in quantities required by the Company.  The supply of fabricated copper products is highly concentrated between two global suppliers.  All purchases of fabricated copper are currently from one of these suppliers.  The Company normally does not experience material shortages and believes that our suppliers’ production of these materials will be adequate throughout the next fiscal year.  In addition, when possible, Modine has made material pass-through arrangements with its key customers.  Under these arrangements, the Company can pass material cost increases and decreases to its customers.  However, where these pass-through arrangements are utilized, there is a time lag between the time of the material increase or decrease and the time of the pass-through.  To further mitigate the Company’s exposure to fluctuating material prices, we enter into forward contracts from time to time to hedge a portion of our forecasted aluminum purchases, our single largest purchased commodity.  The Company also entered into fixed price contracts to hedge against changes in natural gas price over the winter months.  In addition, the Company utilized collars for certain forecasted copper purchases, and also entered into forward contracts for certain forecasted nickel purchases.  During fiscal 2010, the Company did not enter into any new commodity hedges.  At March 31, 2010, the Company had forward contracts outstanding that hedge less than 5 percent of North American aluminum requirements anticipated to be purchased over the next five years.

Patents

The Company owns outright or has a number of licenses to produce products under patents.  These patents and licenses obtained over a period of years expire at various times.  Because the Company has many product lines, it believes that its business as a whole is not materially dependent upon any particular patent or license, or any particular group of patents or licenses.  Modine considers each of its patents, trademarks and licenses to be of value and aggressively defends its rights throughout the world against infringement. Modine has been granted and/or acquired more than 2,000 patents worldwide over the life of the Company.


Research and Development

The Company remains committed to its vision of creating value through technology.  Company-sponsored R&D activities support the development of new products, processes and services, and the improvement of existing products, processes, and services.  R&D expenditures were $56.9 million, $73.2 million and $85.8 million in fiscal 2010, 2009 and 2008, respectively.  There were no material expenditures on research activities that were customer-sponsored.  Over the course of the last few years, the Company has become involved in several industry-, university- and government-sponsored research organizations, that conduct research and provide data on technical topics deemed to be of interest to the Company for practical applications in the markets the Company serves.  The research developed as a result is generally shared among the member organizations.

To achieve efficiencies and lower developmental costs, Modine's research and engineering groups work closely with our customers on special projects and systems designs.  In addition, the Company is participating in U.S. government-funded projects, including dual purpose programs in which the Company retains commercial intellectual property rights in technology it develops for the government, such as a contracts with the United States Army Research Development and Engineering Command for the development of advanced battery thermal management systems; the design and demonstration of waste heat recovery systems; development of CO2-based climate control systems; and research and testing directed at the enhancement of EGR cooler in-service performance.

Quality Improvement

Through Modine’s global Quality Management System (“QMS”), the manufacturing facilities in our Original Equipment – Asia, Europe and North America segments and our South America segment are registered to ISO 9001:2008 or ISO/TS 16949:2009 standards, helping to ensure that our customers receive high quality products and services from every Modine facility.  While customer expectations for performance, quality and service have risen continuously over the past years, our QMS has enabled Modine to drive improvements in quality performance and enabled the ongoing delivery of products and services that meet or exceed customer expectations.

The global QMS operates in the context of the Modine Operating System (“MOS”) and the Modine Production System (“MPS”), that focus on leadership and rapid continuous improvement.  Sustainable continuous improvement is driven throughout all functional areas and operating regions of the organization by the principles, processes and behaviors that are core to these systems.
 
Environmental, Health and Safety Matters

Modine is committed to preventing pollution, eliminating waste and reducing environmental risks.  The Company’s existing facilities maintained their Environmental Management System (“EMS”) certification to the international ISO14001 standard through independent third-party audits, while new facilities in Asia and Europe are implementing Modine’s global EMS with subsequent ISO14001 certification.  All Modine locations have established specific environmental improvement targets and objectives for the coming fiscal year.

In fiscal 2010, Modine continued its commitment to reduce its dependence on fossil fuels and to shrink its global carbon footprint.  The Company achieved an 8 percent reduction in energy consumption over fiscal 2009 at those locations with continuing operations.  A year-over-year reduction of approximately 19,900 tons of carbon dioxide was realized, which is equivalent to saving 2.0 million gallons of gasoline.

Modine built on its successful history of environmental stewardship in fiscal 2010 by establishing objectives for reducing waste, air emissions and water use. Air emissions, hazardous waste, and solid wastes declined at facilities with continuing operations by 1.5 million pounds this past fiscal year, an approximate 16 percent improvement.  Water consumption decreased by 11 percent, conserving nearly 1.6 million cubic feet of water.

Modine's commitment to environmental stewardship is also reflected in its reporting of chemical releases as monitored by the United States Environmental Protection Agency's Toxic Chemical Release Inventory program.  The Company's U.S. locations decreased their reported chemical releases by 52 percent from calendar year 2007 to 2008, with a 95 percent decline from 1998 to 2008.  Modine anticipates significant decreases in reported releases for calendar years 2009 and 2010 which will be largely influenced by the elimination of a liquid painting process at its Harrodsburg, Kentucky facility.  That process accounted for 90 percent of the Company’s releases reported in calendar year 2008.


Although a portion of the above improvements can be attributed to decreased manufacturing volumes, ongoing energy and resource conservation projects along with a continued focus on waste minimization contributed significantly to these achievements.

Modine’s products reflect our sense of environmental responsibility.  The Company continues its development and refinement of environmentally friendly product lines including: R22-free HVAC units; oil, fuel, and EGR coolers for diesel applications, diesel truck idle-off technologies to reduce fuel use and associated air emissions and high efficiency stationary fuel cell applications.  The Airedale Schoolmate HVAC product line with environmentally friendly R410A refrigerant has been coupled with ground source heat pump technology to utilize the natural heat sink properties of the earth to reduce energy consumption.  The Effinity93, which is the most efficient gas-fired unit heater in North America, was introduced in fiscal 2010.

An obligation for remedial activities may arise at Modine-owned facilities due to past practices or as a result of a property purchase or sale.  These expenditures most often relate to sites where past operations followed practices that were considered acceptable under then-existing regulations, but now require investigative and/or remedial work to ensure appropriate environmental protection or where the Company is a successor to the obligations of prior owners and current laws and regulations require investigative and/or remedial work to ensure sufficient environmental compliance.  Two of the Company's currently owned manufacturing facilities and one formerly owned property have been identified as requiring soil and/or groundwater remediation.  Environmental liabilities recorded as of March 31, 2010, 2009, and 2008 to cover the investigative work and remediation for sites in the United States, Brazil, and The Netherlands were $3.0 million, $2.0 million and $2.1 million, respectively.  These liabilities are recorded in the consolidated balance sheet in "accrued expenses and other current liabilities" and "other noncurrent liabilities."

Environmental expenses charged to current operations, including remediation costs, solid waste disposal, and operating and maintenance costs totaled $2.9 million in fiscal 2010.  Operating expenses of some facilities may increase during fiscal year 2011 because of environmental matters but the competitive position of the Company is not expected to change materially as a result of these expenses.

Modine’s health and safety performance showed continued improvement in fiscal 2010, when we recorded a global Recordable Incident Rate (“RIR”) of 1.85, based upon U.S. recordkeeping practices.  This represents a 19 percent year-over-year improvement in recordable injuries over fiscal 2009, and marks the fourth consecutive year of improved RIR.  The fiscal 2010 RIR was the lowest on record for Modine, and is reflective of the Company’s continued commitment to ensuring a safe workplace.  Ten company-owned or joint venture locations ended the year with no recordable injuries. Complementing this achievement were nineteen facilities worldwide that either had no injuries in fiscal year 2010 or exceeded the 10 percent RIR improvement goal.

Employees

The number of persons employed by the Company as of March 31, 2010 was 5,984.

Seasonal Nature of Business

The Company’s operating performance generally is not subject to a significant degree of seasonality as sales to OEMs are dependent upon the demand for new vehicles.  Our Commercial Products segment does experience a degree of seasonality since the demand for HVAC products is affected by heating and cooling seasons, weather patterns, construction, and other factors.  Generally, sales volume within the Commercial Products segment is stronger in the second and third fiscal quarters corresponding with demand for heating products.

Working Capital Items

The Company manufactures products for the original equipment segments on an as-ordered basis, which makes large inventories of such products unnecessary.  In addition, the Company does not experience a significant amount of returned products.  In the Commercial Products segment, the Company maintains varying levels of finished goods inventory due to certain sales programs.  In these areas, the industry and the Company generally make use of extended terms of payment for customers on a limited basis.


Available Information

We make available free of charge through our website, www.modine.com (Investor Relations link), our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements, other Securities Exchange Act reports and all amendments to those reports as soon as reasonably practicable after such material is electronically filed with, or furnished to, the Securities and Exchange Commission (“SEC”).  Our reports are also available free of charge on the SEC’s website, www.sec.gov.  Also available free of charge on our website (Investor Relations link) are the following corporate governance documents:

-
Code of Ethics and Business Conduct, which is applicable to all Modine employees, including the principal executive officer, the principal financial officer, the principal accounting officer and directors;
-
Corporate Governance Guidelines;
-
Audit Committee Charter;
-
Officer Nomination and Compensation Committee Charter;
-
Corporate Governance and Nominating Committee Charter; and
-
Technology Committee Charter.

All of the reports and corporate governance documents referred to above may also be obtained without charge by contacting Investor Relations, Modine Manufacturing Company, 1500 DeKoven Avenue, Racine, Wisconsin 53403-2552.  We do not intend to incorporate our internet website and the information contained therein or incorporated therein into this annual report on Form 10-K.

ITEM 1A.     RISK FACTORS.

Our business involves risks.  The following information about these risks should be considered carefully together with the other information contained in this report.  The risks described below are not the only risks we face.  Additional risks not currently known or deemed immaterial as of the date of this report may also result in adverse results for our business.

Financial Risks

Liquidity and Access to Cash

Continued volume declines and potential disruptions in the credit markets may adversely affect our ability to fund our liquidity requirements and to meet our long-term commitments.

Significant volume decreases in the commercial vehicle and automotive markets continue to adversely affect cash flows from operations.  If cash flows are not sufficient to fund our operations, we may be required to rely on the banking and credit markets to meet our financial commitments and short-term liquidity needs.  Disruptions in the capital and credit markets, as have been experienced during 2008 and into 2009, could adversely affect our ability to draw on our revolving credit facility.  Our access to funds under that credit facility is dependent upon the ability of the banks that are parties to the facility to meet their funding commitments.  Those banks may not be able to meet their funding commitments to us if they experience shortages of capital and liquidity or if they experience excessive volumes of borrowing requests from Modine and other borrowers within a short period of time.  Longer term disruptions in the capital and credit markets as a result of uncertainty, changing or increased regulation, reduced alternatives, or failures of significant financial institutions could adversely affect our access to liquidity needed for our business.  Any such disruption could require us to take measures to conserve cash until the markets stabilize or until alternative credit arrangements or other funding for our business needs can be arranged.

Our liquidity could be jeopardized by our suppliers suspending normal trade credit terms.

Our liquidity could also be adversely impacted if our suppliers were to suspend normal trade credit terms and require payment in advance or payment on delivery of purchases.  If this were to occur, we would be dependent on other sources of financing to bridge the additional period between payment of our suppliers and receipt of payments from our customers.


Our debt level and covenant restrictions may increase our vulnerability to market conditions.

As of March 31, 2010, our total consolidated debt was $139.2 million.  This debt level could have important consequences for the Company, including: increasing our vulnerability to general adverse economic, credit market and industry conditions; requiring a substantial portion of our cash flows from operations to be used for the payment of interest rather than to fund working capital, capital expenditures, strategic business actions and general corporate requirements; limiting our ability to obtain additional financing or refinance our existing debt agreements; and limiting our flexibility in planning for, or reacting to, changes in our business and the industries in which we operate.

The agreements governing our debt include covenants that restrict, among other things, our ability to incur additional debt; pay dividends on or repurchase our equity; make investments; and consolidate, merge or transfer all or substantially all of our assets.  Our ability to comply with these covenants may be adversely affected by events beyond our control, including prevailing economic, financial and industry conditions.  These covenants may also require that we take action to reduce our debt or to act in a manner contrary to our short-term or long-term business objectives.  There can be no assurance that we will meet our covenants in the future or that the lenders will waive a failure to meet those tests.  Even if we are able to maintain compliance with our covenants, our revolving debt agreement, with a balance of $7.5 million as of March 31, 2010, matures in fiscal 2012, and adverse economic, credit market and industry conditions could make it difficult to refinance this indebtedness.

Our primary lenders may be required to make a payment to the senior note holders.

Under the terms of the First Amendment to Collateral Agency and Intercreditor Agreement (“Intercreditor Agreement”), 90 days after the expiration of our revolving credit facility in July 2011, certain actions may be required in order to preserve a stated ratio relative to the Company’s indebtedness to the primary lenders on the one hand and the senior note holders on the other.  This portion of the Intercreditor Agreement, if triggered, would require the primary lenders to pay the senior note holders to preserve the relative position of those two groups that existed when the Intercreditor Agreement was executed.  If the outstanding balance on the revolving credit facility at that time is the same as it was as of March 31, 2010, the primary lenders would be required to pay approximately $42 million to the senior note holders in October 2011.  We may be required to reimburse the primary lenders for the rebalancing payment made to the senior note holders.

Recent market trends may require additional funding for our pension plans.

The Company has several non-contributory defined benefit pension plans that cover most of its domestic employees hired on or before December 31, 2003.  The funding policy for these plans is to contribute annually, at a minimum, the amount necessary on an actuarial basis to provide for benefits in accordance with applicable laws and regulations.  The depressed market value of the assets held by these domestic plans has resulted in a $62.9 million underfunded status of these plans.  During fiscal 2011, we will be required to make a funding contribution of $10.9 million related to these domestic plans.  If significant additional funding contributions are necessary, this could have an adverse impact on the Company’s liquidity position.

Market Risks

Customer and Supplier Matters

The current financial condition of the vehicular industry in Europe and the United States could have a negative impact on our ability to finance our operations and disrupt the supply of components to our OEM customers.

Several of our key customers face significant business challenges due to increased competitive conditions and lower consumer demand.  We depend upon the ability of our customers to timely pay the amounts we have billed them for tools and products.  Significant disruption in our customers’ ability to pay us in a timely manner because of financial difficulty or otherwise would negatively impact on our ability to finance our operations.

In addition, because of the challenging conditions within the global vehicular industry, multiple suppliers have filed for bankruptcy.  The bankruptcy or insolvency of other vehicular suppliers or work stoppages or slowdowns due to labor unrest that may affect these suppliers or our OEM customers could lead to supply disruptions that could have an adverse effect on our business.


Even if such suppliers are not in bankruptcy, many are facing severe financial challenges.  As a result, they could impose restrictive payment terms or cease to supply us, which would have a negative impact on our ability to finance our operations.  Because of the expense of dual sourcing, many of our suppliers are single sourced and hold the tooling for the products we purchase from them.  The process to qualify a new supplier and produce tooling is expensive, time consuming and dependent upon customer approval and qualification.

Our OEM customers continually seek price reductions from us.  These price reductions adversely affect our results of operations and financial condition.

A challenge that we and other suppliers to vehicular OEMs face is continued price reduction pressure from our customers.  Downward pricing pressure has been a characteristic of the automotive industry in recent years and is migrating to all our vehicular OEM markets.  Virtually all such OEMs have aggressive price reduction initiatives that they impose upon their suppliers, and such actions are expected to continue in the future.  In the face of lower prices to customers, the Company must reduce its operating costs in order to maintain profitability.  The Company has taken and continues to take steps to reduce its operating costs to offset customer price reductions; however, price reductions are adversely affecting our profit margins and are expected to do so in the future.  If the Company is unable to offset customer price reductions through improved operating efficiencies, new manufacturing processes, sourcing alternatives, technology enhancements and other cost reduction initiatives, or if we are unable to avoid price reductions from our customers, our results of operations and financial condition could be adversely affected.

The continual pressure to absorb costs adversely affects our profitability.

We continue to be pressured to absorb costs related to product design, engineering and tooling, as well as other items previously paid for directly by OEMs.  They are also requesting that we pay for design, engineering and tooling costs that are incurred prior to the start of production and recover these costs through amortization in the piece price of the applicable component.  Some of these costs cannot be capitalized, which adversely affects our profitability until the programs for which they have been incurred are launched.  If a given program is not launched or is launched with significantly lower volumes than planned, we may not be able to recover the design, engineering and tooling costs from our customers, further adversely affecting our profitability.

Our OEM business, which accounts for approximately 85 percent of our business currently, is dependent upon the health of the markets we serve.

Current global economic and financial market conditions may materially and adversely affect our results of operations and financial condition.  Economic and financial market conditions that adversely affect our customers may cause them to terminate existing purchase orders or to reduce the volume of products they purchase from us in the future.  We are highly susceptible to downward trends in the markets we serve because our customers’ sales and production levels are affected by general economic conditions, including access to credit, the price of fuel, employment levels and trends, interest rates, labor relations issues, regulatory requirements, trade agreements and other factors.  Any significant decline in production levels for current and future customers could result in long-lived asset impairment charges and would reduce our sales and adversely impact our results of operations and financial condition.

The slowdown in the global economy has reduced the demand for commercial vehicles.  The global truck markets are subject to tightening emission standards that drive cyclical demand patterns.  The global construction, agriculture and industrial markets are also impacted by emission regulations and timelines driving the need for advanced product development.  Continuing declines in any of these markets would have an adverse effect on our business.

If we were to lose business with a major OEM customer, our revenue and profitability could be adversely affected.

Deterioration of a business relationship with a major OEM customer could cause the Company’s revenue and profitability to suffer.  We principally compete for new business both at the beginning of the development of new models and upon the redesign of existing models by our major customers.  New model development generally begins two to five years prior to the marketing of such models to the public.  The failure to obtain new business on new models or to retain or increase business on redesigned existing models could adversely affect our business and financial results.  In addition, as a result of the relatively long lead times required for many of our complex structural components, it may be difficult in the short-term for us to obtain new sales to replace any unexpected decline in the sales of existing products.  We may incur significant expense in preparing to meet anticipated customer requirements that may not be recovered.  The loss of a major OEM customer, the loss of business with respect to one or more of the vehicle models that use our products, or a significant decline in the production levels of such vehicles could have an adverse effect on our business, results of operations and financial condition.


The Company could be adversely affected if we experience shortages of components or materials from our suppliers.

In an effort to manage and reduce the cost of purchased goods and services, the Company, like many suppliers and customers, has been consolidating its supply base.  As a result, the Company is dependent upon limited sources of supply for certain components used in the manufacture of our products.  The Company selects its suppliers based on total value (including price, delivery and quality), taking into consideration their production capacities, financial condition and ability to meet demand.  In some cases, it can take several months or longer to find a supplier due to qualification requirements.  However, there can be no assurance that strong demand, capacity limitations or other problems experienced by the Company’s suppliers will not result in occasional shortages or delays in their supply of product to us.  If we were to experience a significant or prolonged shortage of critical components or materials from any of our suppliers and could not procure the components or materials from other sources, the Company would be unable to meet its production schedules for some of its key products and would miss product delivery dates, which would adversely affect our sales, margins and customer relations.

Operational Risks

Restructuring

We may be unable to complete and successfully implement our restructuring plans to reduce costs and increase efficiencies in our businesses and, therefore, we may not achieve the cost savings or timing for completion that we initially projected.

We are implementing several cost savings programs, including plant closures.  Successful implementation of these and other initiatives, including the expansion in low cost countries, is critical to our future competitiveness and our ability to improve our profitability.

We expect to complete the closing of three plants in North America by March 31, 2011.  We have and may continue to experience inefficiencies in the movement of product lines from plants being closed to plants that are remaining open, which could result in delays and reduced cost savings.

We may need to undertake further restructuring actions.

We have initiated certain restructuring actions to realign and resize our production capacity and cost structure to meet current and projected operational and market requirements.  We may need to take additional actions to reduce the Company’s cost structure and the charges related to these actions may have a material adverse effect on our results of operations and financial condition.

Global Nature of the Business

As a global company, we are subject to currency fluctuations, and any significant movement between the U.S. dollar, the euro, and Brazilian real, in particular, could have an adverse effect on our profitability.

Although our financial results are reported in U.S. dollars, a significant portion of our sales and operating costs are realized in euros, the Brazilian real and other currencies.  Our profitability is affected by movements of the U.S. dollar against the euro, the real and other currencies in which we generate revenues and incur expenses.  To the extent that we are unable to match revenues received in foreign currencies with costs paid in the same currency, exchange rate fluctuations in any such currency could have an adverse effect on our financial results.  During times of a strengthening U.S. dollar, our reported sales and earnings from our international operations will be reduced because the applicable local currency will be translated into fewer U.S. dollars.  Significant long-term fluctuations in relative currency values, in particular a significant change in the relative values of the U.S. dollar, euro or real, could have an adverse effect on our profitability and financial condition.


Reliance Upon Intellectual Property and Product Quality

If we cannot differentiate ourselves from our competitors with our technology, our products may become commodities and our sales and earnings would be adversely affected.

If we were to compete only on cost, our sales would decline substantially.  If we cannot differentiate ourselves from our competitors with our technology, our products may become commodities and our sales and earnings would be adversely affected.

Developments or assertions by or against the Company relating to intellectual property rights could adversely affect our business.

The Company owns significant intellectual property, including a large number of patents, trademarks, copyrights and trade secrets, and is involved in numerous licensing arrangements.  The Company’s intellectual property plays an important role in maintaining our competitive position in a number of the markets we serve.  Developments or assertions by or against the Company relating to intellectual property rights could adversely affect the business.  Significant technological developments by others also could adversely affect our business and results of operations.

We may incur material losses and costs as a result of product liability and warranty claims and litigation.

We are exposed to warranty and product liability claims in the event that our products fail to perform as expected, and we may be required to participate in a recall of such products.  Our largest customers have recently extended their warranty protection for their vehicles.  Other OEMs have also similarly extended their warranty programs.  This trend will put additional pressure on the supply base to improve quality systems.  This trend may also result in higher cost recovery claims by OEMs from suppliers whose products incur a higher rate of warranty claims.  Historically, we have experienced relatively low warranty charges from our customers due to our contractual arrangements and improvements in the quality, reliability and durability performance of our products.  If our customers demand higher warranty-related cost recoveries, or if our products fail to perform as expected, it could have a material adverse impact on our results of operations or financial condition.  We are also involved in various legal proceedings incidental to our business.

Compliance with Governmental Regulations
 
We may experience negative or unforeseen tax consequences.

We periodically review the probability of the realization of our deferred tax assets based on forecasts of taxable income in the U.S. and numerous foreign jurisdictions.  In our review, we use historical results, projected future operating results based upon approved business plans, eligible carryforward periods, tax planning opportunities and other relevant considerations.  Adverse changes in the profitability and financial outlook in both the U.S. and numerous foreign jurisdictions may require changes in the valuation allowances to reduce our deferred tax assets or increase tax accruals. Such changes could result in material non-cash expenses in the period in which the changes are made and could have a material adverse impact on our results of operations or financial condition.

Our business is subject to costs associated with environmental, health and safety regulations.

Our operations are subject to various federal, state, local and foreign laws and regulations governing, among other things, emissions to air, discharge to waters and the generation, handling, storage, transportation, treatment and disposal of waste and other materials.  We believe that our operations and facilities have been and are being operated in compliance, in all material respects, with such laws and regulations, many of which provide for substantial fines and sanctions for violations.  The operation of our manufacturing facilities entails risks in these areas, however, and there can be no assurance that we will not incur material costs or liabilities relating to such matters.  In addition, potentially significant expenditures could be required in order to comply with evolving environmental, health and safety laws, regulations or other pertinent requirements that may be adopted or imposed in the future.


We are also expanding our business in China and India where environmental, health and safety regulations are in their infancy.  As a result, we cannot determine how these laws will be implemented and the impact of such regulation on the Company.

ITEM 1B.   UNRESOLVED STAFF COMMENTS.

None.

ITEM 2.   PROPERTIES.

We operate manufacturing facilities in the United States and certain foreign countries.  The Company's world headquarters, including general offices, and laboratory, experimental and tooling facilities are maintained in Racine, Wisconsin.  Additional technical support functions are located in Bonlanden, Germany.

The following table sets forth information regarding our principal properties by business segment as of March 31, 2010.  Properties with less than 20,000 square feet of building space have been omitted from this table.

Location of Facility
 
Building Space and Primary Use
 
Owned or Leased
South America Segment
       
Sao Paulo, Brazil
 
336,000 sq. ft./manufacturing
 
Owned
         
Original Equipment – North America Segment
       
Harrodsburg, KY
 
253,000 sq. ft./manufacturing
 
Owned
Lawrenceburg, TN
 
210,000 sq. ft./manufacturing
 
143,800 Owned;
66,200 Leased
Clinton, TN
 
194,100 sq. ft./manufacturing
 
Owned
Pemberville, OH
 
189,900 sq. ft./manufacturing
 
Owned
McHenry, IL
 
164,700 sq. ft./manufacturing
 
Owned
Jefferson City, MO
 
162,000 sq. ft./manufacturing
 
Owned
Trenton, MO
 
159,900 sq. ft./manufacturing
 
Owned
Washington, IA
 
148,800 sq. ft./manufacturing
 
Owned
Logansport, IN
 
141,600 sq. ft./manufacturing
 
Owned
Joplin, MO
 
139,500 sq. ft./manufacturing
 
Owned
Camdenton, MO
 
128,000 sq. ft./manufacturing
 
Leased
Nuevo Laredo, Mexico (Plant II)
 
  90,000 sq. ft./manufacturing
 
Owned
   
 
   
Original Equipment - Asia Segment
       
Chennai, India
 
118,100 sq. ft./manufacturing
 
Owned
Changzhou, China
 
107,600 sq. ft./manufacturing
 
Owned
Shanghai, China
 
  64,600 sq. ft./manufacturing
 
Leased
         
Original Equipment - Europe Segment
       
Wackersdorf, Germany
 
344,400 sq. ft./assembly
 
Owned
Bonlanden, Germany
 
262,200 sq. ft./administrative & technology center
 
Owned
Kottingbrunn, Austria
 
220,600 sq. ft./manufacturing
 
Owned
Pontevico, Italy
 
153,000 sq. ft./manufacturing
 
Owned
Berndorf, Austria
 
145,700 sq. ft./manufacturing
 
Leased
Tübingen, Germany
 
126,400 sq. ft./manufacturing
 
Owned
Pliezhausen, Germany
 
122,400 sq. ft./manufacturing
 
49,800 Owned;
72,600 Leased
Kirchentellinsfurt, Germany
 
107,600 sq. ft./manufacturing
 
Owned
Mezökövesd, Hungary
 
  90,500 sq. ft./manufacturing
 
Owned
Neuenkirchen, Germany
 
  76,400 sq. ft./manufacturing
 
Owned
Uden, Netherlands
 
  61,900 sq. ft./manufacturing
 
Owned
Gyöngyös, Hungary
 
  57,000 sq. ft./ manufacturing
 
Leased
         
Commercial Products Segment
       
Leeds, United Kingdom
 
269,100 sq. ft./administrative & manufacturing
 
Leased
Nuevo Laredo, Mexico (Plant I)
 
198,500 sq. ft./manufacturing
 
Owned
Buena Vista, VA
 
197,000 sq. ft./manufacturing
 
Owned
Lexington, VA
 
104,000 sq. ft./warehouse
 
Owned
West Kingston, RI
 
  92,800 sq. ft./manufacturing
 
Owned
Laredo, TX
 
  32,000 sq. ft./warehouse
 
Leased
         
Corporate Headquarters
       
Racine, WI
 
458,000 sq. ft./headquarters & technical center
 
Owned


We consider our plants and equipment to be well maintained and suitable for their purposes.  We review our manufacturing capacity periodically and make the determination as to our need to expand or, conversely, rationalize our facilities as necessary to meet changing market conditions and Company needs.

ITEM 3.   LEGAL PROCEEDINGS.

The information required hereunder is incorporated by reference from Note 26 of the Notes to Consolidated Financial Statements.

ITEM 4.   RESERVED.

EXECUTIVE OFFICERS OF THE REGISTRANT.

The following sets forth the name, age, recent business experience and certain other information relative to each person who was an executive officer as of March 31, 2010.

Name
 
Age
 
Position
Thomas A. Burke
 
53
 
President and Chief Executive Officer (April 2008 – Present); Executive Vice President and Chief Operating Officer (July 2006 – March 2008); and Executive Vice President (May 2005 – July 2006) of the Company.  Prior to joining Modine in May 2005, Mr. Burke worked over a period of nine years in various management positions with Visteon Corporation in Detroit, Michigan, a leading supplier of parts and systems to automotive manufacturers, including as Vice President of North American Operations (2002 – May 2005) and Vice President, European and South American Operations (2001 – 2002).  Prior to working at Visteon, Mr. Burke worked in positions of increasing responsibility at Ford Motor Company.
         
Klaus A. Feldmann
 
56
 
Regional Vice President – Europe (November 2006 - Present); Group Vice President – Europe (2000 – October 2006); General Manager and Managing Director – European Heavy Duty Division (1996 – 2000).
         
Scott L. Bowser
 
46
 
Regional Vice President – Americas (March 2009 - Present); Managing Director – Modine Brazil (April 2006 - March 2009); General Sales Manager – Truck Division (January 2002 – March 2006); Plant Manager at the Company’s Pemberville, OH plant (1998 - 2001).
         
Thomas F. Marry
 
49
 
Regional Vice President – Asia and Commercial Products Group (November 2007 - Present); Managing Director – Powertrain Cooling Products (October 2006 - October 2007); General Manager – Truck Division (2003 - 2006); Director – Engine Products Group (2001 – 2003); Manager – Sales, Marketing and Product Development (1999 - 2001); Marketing Manager (1998 - 1999).
         
Margaret C. Kelsey
 
45
 
Vice President, Corporate Development, General Counsel and Secretary (November 2008 – Present); Vice President Corporate Strategy and Business Development (May 2008 – October 2008); Vice President - Finance, Corporate Treasury and Business Development (January 2007 – April 2008); Corporate Treasurer & Assistant Secretary (January 2006 – December 2006); Senior Counsel & Assistant Secretary (April 2002 - December 2005); Senior Counsel (2001 – March 2002).  Prior to joining the Company in 2001, Ms. Kelsey was a partner with the law firm of Quarles & Brady LLP.


Officer positions are designated in Modine's Bylaws and the persons holding these positions are elected annually by the Board generally at its first meeting after the annual meeting of shareholders in July of each year.

There are no family relationships among the executive officers and directors.  With the exception of Mr. Burke, all of the above executive officers have been employed by Modine in various capacities during the last five years.

There are no arrangements or understandings between any of the above officers and any other person pursuant to which he or she was elected an officer of Modine.

PART II

ITEM 5.   MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

The Company's common stock is listed on the New York Stock Exchange.  The Company's trading symbol is "MOD."  The table below shows the range of high and low sales prices for the Company's common stock for fiscal 2010 and 2009.  As of March 31, 2010, shareholders of record numbered 3,291.

   
2010
   
2009
 
Quarter
 
High
   
Low
   
Dividends
   
High
   
Low
   
Dividends
 
First
  $ 5.40     $ 2.30     $ -     $ 18.36     $ 12.35     $ 0.1000  
Second
    9.85       4.60       -       19.60       12.07       0.1000  
Third
    12.69       8.74       -       14.03       3.07       0.1000  
Fourth
    12.70       8.76       -       5.76       0.73       -  
TOTAL
                  $ -                     $ 0.3000  

Certain of the Company's debt agreements prohibit the payment of cash dividends and the acquisition of Company stock by the Company.

PERFORMANCE GRAPH

The following graph compares the cumulative five-year total return on the Company’s common stock with similar returns on the Russell 2000 Index and the Standard & Poor’s (S&P) MidCap 400 Industrials Index.  The graph assumes a $100 investment and reinvestment of dividends.


 
March 31,
 
Initial Investment
   
Indexed Returns
 
   
2005
   
2006
   
2007
   
2008
   
2009
   
2010
 
Company / Index
                                   
Modine Manufacturing Company
  $ 100     $ 107.19     $ 85.66     $ 56.20     $ 10.04     $ 45.14  
Russell 2000 Index
    100       125.85       133.28       115.95       72.47       118.87  
S&P MidCap 400 Industrials Index
    100       133.22       140.59       142.83       85.10       139.97  

ITEM 6.   SELECTED FINANCIAL DATA.

The following selected financial data has been presented on a continuing operations basis, and excludes the discontinued operating results of the South Korean-based HVAC business, the Electronics Cooling business, and the Aftermarket business and the loss on the July 22, 2005 spin-off of the Aftermarket business in fiscal 2006.

(in thousands, except per share amounts)
 
Fiscal Year ended March 31
 
   
2010
   
2009
   
2008
   
2007
   
2006
 
                               
Net sales
  $ 1,163,234     $ 1,408,714     $ 1,601,672     $ 1,525,492     $ 1,401,740  
(Loss) earnings from continuing operations
    (20,298 )     (103,597 )     (54,427 )     39,228       74,406  
Total assets
    840,252       852,132       1,168,283       1,101,573       1,052,095  
Long-term debt - excluding current portion
    135,952       243,982       224,525       173,074       149,576  
Dividends per share
    -       0.30       0.70       0.70       0.70  
Net (loss) earnings from continuing operations
   per share of common stock - basic
    (0.52 )     (3.23 )     (1.70 )     1.21       2.18  
Net (loss) earnings from continuing operations
   per share of common stock - diluted
    (0.52 )     (3.23 )     (1.70 )     1.21       2.15  

The following factors impact the comparability of the selected financial data presented above:

·
During fiscal 2009, the Company recorded a goodwill impairment charge of $9.0 million within the Original Equipment – Europe segment.  During fiscal 2008, the Company recorded a goodwill impairment charge of $23.8 million within the Original Equipment – North America segment.  Refer to Note 15 of the Notes to Consolidated Financial Statements for additional discussion of these charges.


·
During fiscal 2010, 2009 and 2008, the Company recorded long-lived asset impairment charges of $6.5 million, $26.8 million and $11.6 million, respectively.  Refer to Note 11 of the Notes to Consolidated Financial Statements for additional discussion of these charges.

·
During fiscal 2009, the Company recognized an impairment charge of $7.6 million recorded in other expense (income) – net on an equity investment.  Refer to Note 12 of the Notes to Consolidated Financial Statements for additional discussion of this charge.

·
During fiscal 2010, the Company’s effective tax rate was negative 93.9 percent, as the Company continues to pay taxes in foreign jurisdictions that earn profits, but does not recognize any tax benefits on losses generated in the U.S., Germany and Austria because we recorded full tax valuation allowances in these jurisdictions.  During fiscal 2009, the Company’s effective tax rate was negative 0.6 percent.  During fiscal 2008, the Company’s effective tax rate was negative 227.5 percent due to a valuation allowance of $59.4 million recorded primarily against the net U.S. deferred tax assets.  During fiscal 2007, the Company’s effective tax rate was 15.8 percent.  Refer to Note 7 of the Notes to Consolidated Financial Statements for additional discussion on the effective tax rate.

·
During fiscal 2010, 2009, 2008 and 2007, the Company incurred $7.3 million, $39.5 million, $10.2 million and $10.7 million, respectively, of restructuring and other repositioning costs.  Refer to Note 14 of the Notes to Consolidated Financial Statements for additional discussion of the events which comprised these costs.

·
During fiscal 2007, the Company acquired the remaining 50 percent of Radiadores Visconde Ltda. (“Modine Brazil”).  During fiscal 2006, the Company acquired Airedale International Air Conditioning Limited.

ITEM 7.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Overview and Strategic Plan
 
Founded in 1916, Modine Manufacturing Company is a worldwide leader in thermal management systems and components, bringing heating and cooling technology and solutions to diversified global markets.  We operate on five continents, in 14 countries, with approximately 6,000 employees worldwide.
 
Our products are in light-, medium- and heavy-duty vehicles, automobiles, commercial heating, ventilation and air conditioning (HVAC) equipment, refrigeration systems, off-highway and industrial equipment, and fuel cell applications.  Our broad product offerings include heat transfer modules and packages, radiators, oil coolers, charge-air-coolers, vehicular air conditioning, building HVAC equipment, and EGR coolers.

Consolidated Strategy

Our goal is to grow profitably as a leading global provider of thermal management technology to a broad range of niche highway, off-highway and industrial end markets.  We expect to achieve this goal over the long-term through both organic growth and through selective acquisitions.  In order to reach our goal, our strategy is diversification by geography and by end market.  We focus on:

·
Development of new products and technologies for diverse end markets;
·
A rigorous strategic planning and corporate development process; and
·
Operational and financial discipline for improved profitability and long-term stability.
 
Development of New Products and Technologies for Increasingly Diverse End Markets
 
Our ability to develop new products and technologies for current and potential customers and for new, emerging markets is one of our competitive strengths.  We own two global, state-of-the-art technology centers, dedicated to the development and testing of products and technologies.  The centers are located in Racine, Wisconsin in the U.S., and in Bonlanden, Germany.  Our reputation for providing quality products and technologies has been a company strength valued by customers, and has led to a history with few product warranty issues.  In fiscal 2010, we spent $56.9 million (representing approximately 36 percent of selling, general and administrative (SG&A) expenses) on our product and technology research and development efforts.
 
 
We continue to benefit from relationships with customers that recognize the value of having us participate directly in product design, development and validation.  This has resulted and should continue to result in strong, longer-term customer relationships with companies that value partnerships with their suppliers.  In the past several years, our product lines have been under price pressure from increased global competition, primarily from Asia and other low cost areas.  At the same time, many of our products containing higher technology have helped us better manage demands from customers for lower prices.  Many of our technologies are proprietary, difficult to replicate and are patent protected.  We have been granted and/or acquired more than 2,000 patents on our technologies over the life of the Company and work diligently to protect our intellectual property.
 
Strategic Planning and Corporate Development
 
We employ both a short-term and longer-term (three to five year) strategic planning process enabling us to continually assess our opportunities, competitive threats, and economic market challenges.
 
We focus on strengthening our competitive position through strategic, global business development activities.  We continuously look for and take advantage of opportunities to advance our position as a global leader, both by expanding our geographic footprint and by expanding into new end markets – all with a focus on thermal management technologies.  This process allows us to identify product gaps in the marketplace, develop new products and make additional investments to fill those gaps.  An example of our success from this process has been our expansion activities into niche HVAC and refrigeration markets in our Commercial Products segment.
 
Operational and Financial Discipline
 
We operate in an increasingly competitive global marketplace; therefore, we must manage our business with a disciplined focus on increasing productivity and reducing waste.  The competitiveness of the global market place requires us to move toward a greater manufacturing scale in order to create a more competitive cost base.  As costs for materials and purchased parts rise from time to time due to global increases in the metals commodity markets, we seek low-cost country sourcing when appropriate and enter into contracts with some of our customers that provide for these rising costs to be passed through to them on a lag basis.
 
We follow a rigorous financial process for investment and returns, intended to enable increased profitability and cash flows over the long-term with particular emphasis on working capital improvement and prioritization of capital for investment and disposals – driving past and current improvement in global cash and debt management and access to sufficient credit.  This focus helps us identify and take action on underperforming assets in our portfolio, such as our South Korean-based business, which was sold during fiscal 2010.
 
During fiscal 2010, we made significant progress in improving the Company’s liquidity and financial position.  On September 30, 2009, we completed a public offering of 13.8 million shares of our common stock with cash proceeds of $92.9 million after deducting underwriting discounts, commissions, legal, accounting and printing fees.  The proceeds from this offering, along with proceeds from the sale of the South Korean-based business were used to substantially reduce our outstanding indebtedness.  Outstanding indebtedness decreased $110.0 million from the March 31, 2009 balance of $249.2 million to $139.2 million at March 31, 2010.
 
Our executive management incentive compensation plan for fiscal 2010 was based on remaining in compliance with our bank covenants, driving our singular focus on alignment of management interests with shareholders’ interests in our capital allocation and asset management decisions.  In addition, we maintain a long-term incentive compensation plan for officers and certain key employees that is used to attract, retain and motivate key employees who directly impact the long-term performance of the Company.  This plan is comprised of stock options, retention restricted stock awards and performance stock awards, which are based on a mix of earnings per share growth and growth in our stock price relative to the market.

 
Consolidated Market Conditions and Trends
 
During fiscal 2010, the Company reported revenues from continuing operations of $1.16 billion, a 17 percent decrease from $1.41 billion in fiscal 2009.  During the first half of fiscal 2009, the Company recorded relatively strong sales of $828.4 million.  However, the global economic recession dramatically reduced our sales in the third quarter of fiscal 2009 to $325.6 million and further reduced our sales to $254.8 million in the fourth quarter of fiscal 2009.  In the first quarter of fiscal 2010, the Company’s sales remained depressed at $253.6 million.  Since that point, our sales have shown three quarters of sequential improvement, with sales of $324.9 million recorded in the fourth quarter of fiscal 2010.  We are experiencing a slow, but steady improvement in our business levels since the bottom of the recession in the fourth quarter of fiscal 2009.  However, business volumes continue to remain significantly lower than pre-recessionary volumes experienced in the first half of fiscal 2009.
 
The original equipment manufacturer (OEM) marketplace is extremely competitive and our customers demand that we continue to provide high quality products as well as annual price decreases.  From time to time, we also experience volatility in foreign currency exchange rates and the costs of our purchased parts and raw materials – particularly aluminum, copper, steel, and stainless steel (nickel).  The combination of these factors impacts our profitability.
 
Our Response to Recent Market Conditions
 
In response to the declining business and market conditions facing us, we have focused on our four-point plan and implemented a number of cost and operational efficiency measures designed to improve our longer-term competitiveness:

 
o
Manufacturing realignment.  During fiscal 2008, we announced the closure of three manufacturing facilities in the U.S. (Camdenton, Missouri; Pemberville, Ohio; and Logansport, Indiana), and one manufacturing facility in Europe (Tübingen, Germany).  During fiscal 2010, we announced the closure of our Harrodsburg, Kentucky manufacturing facility in the U.S.  The Pemberville and Tübingen closures have been completed, the Logansport and Harrodsburg closures are anticipated to be completed in the first quarter of fiscal 2011, and the Camdenton closure is anticipated to be completed by the end of fiscal 2011.  During fiscal 2009, we implemented a significant reduction of direct costs in our manufacturing facilities and 20 percent reduction of indirect costs in our manufacturing facilities.  When the manufacturing realignment process is completed, we will compete for new business from a much improved cost position with increased asset utilization.  This process should benefit the Company at both the gross and operating margin levels and help us win incremental, profitable business.  The reduction in manufacturing costs achieved contributed to an improvement in our gross margin from 13.3 percent in fiscal 2009 to 14.6 percent in fiscal 2010, despite the year-over-year decline in sales volumes.  We also have invested in four new plants in low cost countries; Changzhou, China; Nuevo Laredo, Mexico; Gyöngyös, Hungary; and Chennai, India.  These facilities are primarily in the start-up phase with several product launches currently underway and numerous launches planned over the next fiscal year.

 
o
Portfolio rationalization.  The Company’s business structure is organized around three global product lines, Engine Products, Powertrain Cooling Products and Commercial Products, which support our reporting segments.  The Company evaluated product lines within and across its segments to assess them relative to Modine’s competitive position and the overall business attractiveness in order to identify those product lines that should be divested or exited.  The Company has implemented an action plan to deemphasize its automotive module business, which most significantly impacts our Original Equipment – Europe segment.  In addition, during fiscal 2010 the Company significantly decreased its exposure to the vehicular heating, ventilation and air conditioning (HVAC) business with the sale of its South Korean operation for net cash proceeds of $10.5 million and upcoming closure of its Harrodsburg, Kentucky facility.

 
o
Capital allocation.  Our business is capital intensive, requiring a significant amount of investment in the new technologies and products that the Company supports.  We recently introduced an enhanced capital allocation discipline designed to allocate capital spending to the segments and programs that will provide the highest return on our investment.  All business units are measured using specific performance standards and they must earn the right to obtain capital to fund growth through their performance.  During fiscal 2010, our capital expenditures were $60 million, which is significantly below our fiscal 2009 capital expenditures of $103 million and our recent historical rates.
 
 
o
Selling, general and administrative (SG&A) cost containment.  The Company is committed to controlling its overall SG&A, and has implemented an initiative to streamline key business processes within its administrative functions in order to assist with this effort.  During fiscal 2009, we completed a global workforce reduction, focusing on the realignment of our corporate and regional headquarters.  The global workforce reduction was enabled in part by the portfolio rationalization and the phase out of certain product lines.  Through this process, we reduced our SG&A costs 21 percent from $199.6 million in fiscal 2009 to $157.5 million in fiscal 2010.
 

In addition to the actions described above, the Company also focused on mitigating material price changes for our products.  When possible, the Company enters into material pass-through arrangements with its key customers where material price changes are subject to pass-through to these customers on a lag basis.  This lag period can extend up to a year, based on the agreements we have with an individual customer.  We also mitigate growing cost pressures by accelerating new product development and expanding into new and existing niche markets.  We continue to focus on developing new and expanded proprietary technology that is of more value in the marketplace – such as our next generation aluminum radiators and EGR cooler – in order to secure favorable price terms.
 
Segment Information – Strategy, Market Conditions and Trends
 
Each of our business segments is managed at the regional vice president or managing director level with separate financial results reviewed by our chief operating decision makers.  These results are used to evaluate the performance of each business segment, and make decisions on the allocation of resources among our various businesses.  Our chief operating decision-makers evaluate segment performance with an emphasis on gross margin, and secondarily based on operating income of each segment, which includes certain allocations of Corporate SG&A expenses.
 
Original Equipment – Europe (39 percent of fiscal 2010 revenues)
 
Our European operation is primarily engaged in providing powertrain and engine cooling systems as well as vehicular climate control components to various end markets, including automotive, heavy duty and industrial, commercial vehicle, bus and off-highway OEMs.  These systems include cooling modules, radiators, charge air coolers, oil cooling products, EGR products, retarder and transmission cooling components, and HVAC condensers.  Competitors include Behr GmbH & Co. K.G., Valeo, TitanX, Denso Corporation, AKG, and a variety of other companies.
 
The second half of fiscal 2009 was adversely impacted by the rapidly shrinking vehicular markets in Europe.  Among all our served markets, the commercial vehicle market experienced the most drastic downturn.  In fiscal 2010, the declining vehicular markets stabilized, albeit at very low levels.  These markets have recently shown some signs of recovery, although we expect this to be a slow recovery over the next several years.
 
To offset the adverse market conditions, management enacted several measures to reduce operating costs and improve cash generation.  Plant direct and indirect headcount as well as overall SG&A costs have been reduced as a result of the portfolio rationalization and the phase out of certain product lines.  The overall Company reduced headcount in this region by approximately 25 percent.
 
We continue our focus on various lean manufacturing initiatives, low-cost country sourcing and the adjustment of our manufacturing footprint to low cost locations, when appropriate.  Production volumes are increasing in our new Gyöngyös, Hungary facility, and we have completed the phase-out of operations at our facility in Tübingen, Germany.  We expect our European business to benefit from our various technology initiatives, which allow us to distinguish ourselves from competitors in the eyes of our customers.
 
This business is negatively impacted by rising material prices, at least until these rising prices are offset by material pass-through agreements on a time lag.  We also expect to continue to see price reduction demands from our customers along with continuous and ongoing increased customer service expectations and competition from low-cost country competitors.  At the same time, the business has performed well through the global economic recession, is strongly positioned with a solid customer reputation for technology, service and project management, and has been successful in winning additional program awards that are scheduled to begin production in the 2011 time frame.  Going forward, we anticipate further opportunities may arise as a result of competitors leaving the market or being unable to meet customer requirements.
 
Original Equipment – North America (34 percent of fiscal 2010 revenues)
 
Our Original Equipment – North America segment includes products and technologies that are found on vehicles made by commercial vehicle OEMs, including Class 3-8 trucks, school buses, transit buses, motor homes and motor coaches.  It also serves the automotive, heavy duty, and industrial markets, including agricultural and construction markets (e.g. lift trucks, compressors and power generation).
 
 
The majority of our North American business is derived from commercial vehicle customers.  The Environmental Protection Agency emissions mandates (January 1, 2007 and January 1, 2010) create cyclicality in the Class 8 heavy-truck commercial vehicle build rates due to pre-buy activity that occurs prior to these emission law changes.  The expected cyclical downturn in this market after the January 1, 2007 emissions law change was exacerbated by economic concerns (recession, high oil and diesel prices, and depressed housing market) that have reduced the demand for Class 8 trucks used to haul freight.  As a result, there was no substantial pre-buy activity prior to the January 1, 2010 emissions law change.  While the January 1, 2007 emissions change and economic concerns created a downturn in build rates, the change did provide an opportunity for us as more of our components are required to be included on each new vehicle to meet the new standards.
 
A positive trend in our North American heavy duty and industrial businesses is increased emission standards for agricultural and construction equipment, which is driving increased demand for our components, such as EGR coolers.
 
The overall strategy for this business segment includes the following:
 
 
·
First, our strategy is to reposition the segment, including reassessing our manufacturing footprint, improving sourcing of raw materials and purchased parts, and other programs intended to increase efficiency and right-size capacity.  We recently closed our Pemberville, Ohio manufacturing facility and are in the process of closing three additional North American manufacturing facilities within this segment, and consolidating the business into other existing locations.  These closures are expected to be completed by the end of fiscal 2011.  We will continue to assess our manufacturing footprint to ensure that we have achieved appropriate manufacturing scale within this region.
 
 
·
Second, we are focused on reducing lead times to bring new products to market and offering a wider product breadth, while at the same time rationalizing the existing product lines that do not meet required financial metrics or fit within our overall strategy.
 
 
·
Third, we are focused on pursuing only selected new business opportunities that meet our minimum targeted rates of return, thus enabling profitable growth to the Company.
 
Our fuel cell business supports the highly complex thermal management needs of fuel cell systems, which increasingly are viewed as alternatives to oil-based fuel.  These fuel cell systems are used in stationary power applications, micro-combined heat and power (“CHP”), vehicle engine applications, and hydrogen fuel processing.  Although the market for fuel cell-based systems is still in its relative infancy, in the past year we continued developing products in support of the micro-CHP market.
 
With respect to the micro-CHP market, fuel cell-based systems are expected to emerge, initially in Europe, over the next several years as a direct replacement for the small boilers found in homes using hydronic heating systems.  In addition to efficient production of hot water for heat, the device is designed to produce electricity to supplement the electrical needs of the home, with off-peak electricity sold back to the grid.  We are continuing to work with Ceres Power, a UK-based developer of these systems, to expand the Company’s presence in this residential market.
 
Commercial Products (14 percent of fiscal 2010 revenues)
 
Our Commercial Products business provides a variety of niche products in North America, Europe, Asia and South Africa that are used by engineers, contractors and building owners in applications such as warehouses, repair garages, greenhouses, residential garages, schools, computer rooms, manufacturing facilities, banks, pharmaceutical companies, stadiums and retail stores.  We manufacture coils (copper tube aluminum fin coils, stainless steel tube aluminum fin coils and all aluminum microchannel coils) for heating, refrigeration, air conditioning and vehicular applications.  We also manufacture heating products for commercial applications, including gas, electric, oil and hydronic unit heaters, low intensity infrared and large roof-mounted direct and indirect fired makeup air units.  Our cooling products for commercial applications include single packaged vertical units and unit ventilators used in school room applications, computer room air conditioning units, air- and water-cooled chillers, ceiling cassettes, and roof top cooling units used in a variety of commercial building applications.
 
 
While revenues remained relatively low due to reduced market demand during the global recession, margins in this business improved primarily from manufacturing efficiencies and reduced SG&A expenses.  Economic conditions, such as demand for new commercial construction and school renovations, are drivers of demand for the heating and cooling products.
 
South America (10 percent of fiscal 2010 revenues)
 
Our South America segment provides heat exchanger products to a variety of markets in the domestic Brazilian market as well as for export to North America and Europe.  This business provides products to the on-highway commercial vehicle markets, off-highway markets, including construction and agricultural applications, automotive OEMs and industrial applications, primarily for power generation systems.  This business also provides products to the Brazilian, North American and European aftermarkets for both automotive and commercial applications.  We manufacture radiators, charge-air-coolers, oil coolers, auxiliary coolers (transmission, hydraulic, and power steering), engine cooling modules and HVAC system modules.
 
The Brazilian agriculture and commercial vehicle markets declined moderately during the global economic downturn.  However, the aftermarket sales under the Radiadores Visconde brand continued to improve.
 
Original Equipment – Asia (3 percent of fiscal 2010 revenues)
 
Our Asian operation is primarily engaged in providing powertrain cooling systems and engine products to customers in commercial vehicle and off-highway markets.  Competitors include, among others, Korens, Behr GmbH & Co. K.G., Tata Toyo, AKG, T.Rad Co. Ltd., and Zhenjiang Yinlin Machinery Co. Ltd.
 
A significant trend in our Asian business is our customers’ emphasis on price versus technology.  This pricing environment requires a low-cost manufacturing profile and continued operating efficiencies in order to maintain a profitable business.
 
Many components that we supply in this region become part of a module, which increases the amount of our content on an engine.  Our strategy in this business segment is to control and reduce costs, secure new business, further diversify our product offering and customer base, and continue to focus on building manufacturing capabilities in China and India to serve the region within the Engine and PTC segments in a more cost competitive manner.  Our new manufacturing facilities in Chennai, India, and Changzhou, China are currently shipping low volumes of products.  We are scheduled to begin production of several new products from both of these new facilities during the next fiscal year.
 
Outlook
 
We have experienced a sequential improvement in our quarterly net sales through fiscal 2010.  However, our sales volumes continue to remain significantly lower than the pre-recessionary volumes experienced in the first half of fiscal 2009.  Our expectations for fiscal 2011 include a modest improvement in sales across all of our segments based on a continued slow recovery from the global recession.  Specifically, we expect partial recovery in the commercial vehicle markets in North America, growth in the off-highway markets in Asia as we launch new programs, and slight improvement in the commercial vehicle, off-highway and automotive markets in Europe.  We expect the positive impact of the sales volume improvements on our results from operations to be largely offset by a less favorable foreign currency translation environment, and particularly as it related to the euro, higher year-over-year metals costs and the lagging nature of our materials pass-through agreements, as well as an increase in SG&A expenses due in large part to higher pension expenses.
 
Consolidated Results of Operations - Continuing Operations
 
Fiscal 2010 and 2009 sales volumes declined significantly as a result of the weakened global economy.  The instability in the global financial and economic markets created a significant downturn in the vehicular markets in which the Company competes.  In fiscal 2009 and 2008, the Company recorded significant goodwill and long-lived asset impairment charges, along with restructuring charges primarily related to workforce reductions.


The following table presents consolidated results from continuing operations on a comparative basis for the years ended March 31, 2010, 2009 and 2008:

Years ended March 31
 
2010
   
2009
   
2008
 
(dollars in millions)
 
$'s
   
% of sales
   
$'s
   
% of sales
   
$'s
   
% of sales
 
                                     
Net sales
  $ 1,163       100.0 %   $ 1,409       100.0 %   $ 1,602       100.0 %
Cost of sales
    993       85.4 %     1,222       86.7 %     1,359       84.8 %
Gross profit
    170       14.6 %     187       13.3 %     243       15.2 %
Selling, general and administrative expenses
    158       13.6 %     200       14.2 %     218       13.6 %
Restructuring (income) charges
    (1 )     -0.1 %     30       2.1 %     4       0.2 %
Impairment of goodwill and long-lived assets
    7       0.6 %     36       2.6 %     35       2.2 %
Earnings (loss) from operations
    7       0.6 %     (79 )     -5.6 %     (14 )     -0.9 %
Interest expense
    23       2.0 %     14       1.0 %     11       0.7 %
Other (income) expense - net
    (6 )     -0.5 %     10       0.7 %     (8 )     -0.5 %
Loss from continuing operations before income taxes
    (10 )     -0.9 %     (103 )     -7.3 %     (17 )     -1.1 %
Provision for income taxes
    10       0.9 %     1       0.1 %     38       2.4 %
Loss from continuing operations
  $ (20 )     -1.7 %   $ (104 )     -7.4 %   $ (54 )     -3.4 %

Year Ended March 31, 2010 Compared to Year Ended March 31, 2009:

Net sales decreased $246 million, or 17.5 percent, to $1.2 billion in fiscal 2010 from $1.4 billion in fiscal 2009 driven by the continuing sales volume deterioration as a result of the weakened global economy.  Medium/heavy duty truck sales are down approximately 20 percent for all markets and agriculture and construction sales volumes are down over 35 percent for all markets.

Gross profit decreased $17 million, or 9.1 percent, to $170 million in fiscal 2010 from $187 million in fiscal 2009, due primarily to the reduction in sales volumes from fiscal 2009 to fiscal 2010.  Gross margin improved from 13.3 percent in fiscal 2009 to 14.6 percent in fiscal 2010.  This increase is primarily related to the focus on cost reduction activities in the manufacturing facilities through the execution of the four-point plan and the impact of favorable materials pricing.

SG&A expenses decreased $42 million, or 21.0 percent, to $158 million in fiscal 2010 from $200 million in fiscal 2009, and decreased as a percentage of sales from 14.2 percent to 13.6 percent.  The overall reduction of SG&A reflects our intense focus on lowering our administrative cost structure and executing on our portfolio rationalization strategy through the execution of the four-point plan.

Restructuring income was recorded during fiscal 2010 related to the reversal of severance liabilities within our European business as a result of favorable benefits negotiations partially offset by restructuring charges related to the announced closure of our Harrodsburg, Kentucky facility.  Restructuring charges of $30 million in fiscal 2009 related to workforce reductions at our Corporate headquarters in Racine, Wisconsin and European headquarters in Bonlanden, Germany.

Long-lived asset impairment charges of $7 million were recorded in fiscal 2010 primarily related to long-lived assets in our North American business for certain assets that were not able to support their asset bases and for the Harrodsburg, Kentucky manufacturing facility based on our planned closure of this facility.  Long-lived asset impairment charges of $36 million in fiscal 2009 included a goodwill impairment charge of $9 million in our Original Equipment – Europe segment and long-lived asset impairment charges of $27 million against certain assets in our European, North American and Commercial Products businesses.

Interest expense increased $9 million from fiscal 2009 to fiscal 2010 based on increased borrowings early in fiscal 2010 at increased interest rates along with the $3.4 million penalty to the holders of our senior notes in connection with the mandatory prepayments of debt with a portion of the cash proceeds from the common stock offering on September 30, 2009.  Also included in interest expense was the amortization of $0.8 million of capitalized debt issuance costs and interest rate derivatives in proportion with the mandatory prepayment of the senior notes.


Other income of $6 million for fiscal 2010 represents a $16 million improvement from other expense of $10 million in fiscal 2009.  Fiscal 2010 other income consists primarily of foreign currency transaction gains on inter-company loans denominated in foreign currencies and a $1.5 million gain on the sale of our 50 percent ownership of Anhui Jianghaui Mando Climate Control Co. Ltd. while fiscal 2009 consisted primarily of foreign currency transaction losses on inter-company loans denominated in foreign currencies and an impairment charge related to an equity investment with a decline in its value that was “other than temporary.”
 
The provision for income taxes increased $9 million in fiscal 2010 from $1 million in fiscal 2009.  The increase in the provision for income taxes was due to an increase in pre-tax earnings from certain tax jurisdictions outside the U.S. primarily in Brazil, Germany and Austria as compared to the prior year.

Year Ended March 31, 2009 Compared to Year Ended March 31, 2008:

Net sales decreased $193 million, or 12.0 percent, to $1.4 billion in fiscal 2009 from $1.6 billion in fiscal 2008 driven by overall sales volume deterioration as a result of the weakened global economy.  Automotive and medium/heavy duty truck sales were down approximately 30 percent and 25 percent, respectively, within the Original Equipment – Europe segment.

Gross profit decreased $56 million, or 23.0 percent, to $187 million in fiscal 2009 from $243 million in fiscal 2008.  Gross margin decreased from 15.2 percent in fiscal 2008 to 13.3 percent in fiscal 2009.  This decrease was primarily related to underabsorption of fixed costs in our manufacturing facilities based on the depressed sales volumes and a shift in our product mix toward lower margin products in Europe.  Lower material costs and a reduction of direct and indirect manufacturing costs in our facilities, comprised of workforce reductions and other indirect cost reduction activities, partially offset this decrease.

SG&A expenses decreased $18 million, or 8.3 percent, to $200 million in fiscal 2009 from $218 million in fiscal 2008, but increased as a percentage of sales from 13.6 percent to 14.2 percent.  The overall reduction of SG&A expense was due to the positive impact of our SG&A containment efforts.  These were partially offset by a $2 million increase in repositioning costs included in SG&A as the Company realigned the Corporate and Regional headquarters.  Restructuring charges increased $26 million primarily related to a workforce reduction at the Corporate headquarters in Racine, Wisconsin and throughout the European facilities, including the European headquarters in Bonlanden, Germany.  During fiscal 2009, asset impairment charges of $36 million were recorded including a goodwill impairment charge of $9 million in the Original Equipment – Europe segment, a long-lived asset impairment charge of $16 million recorded in the Original Equipment – North America segment, and a long-lived asset impairment charge of $10 million recorded in the Original Equipment – Europe segment.  The decrease in gross profit combined with the restructuring and impairment charges contributed to the $65 million decrease in operating income from fiscal 2008 to fiscal 2009.

Interest expense increased $3 million from fiscal 2008 to fiscal 2009 related to an increase in outstanding debt during fiscal 2009 and an increase in interest rates in conjunction with the amendment of our primary debt agreements in February 2009.  Borrowings increased during fiscal 2009 to finance capital expenditures of $103 million.

For fiscal 2009, other expense was $10 million.  For fiscal 2008, other income was $8 million.  The $18 million change in fiscal 2009 was due to foreign currency transaction losses on inter-company loans denominated in a foreign currency in Brazil and an $8 million impairment charge related to an equity investment with a decline in its value that was “other than temporary.”

The provision for income taxes decreased $37 million, or 97 percent, to $1 million in fiscal 2009 from $38 million in fiscal 2008.  The decrease in the provision for income taxes was due to overall losses in tax jurisdictions outside of the U.S. compared to earnings recorded in fiscal 2008.  A valuation allowance of $33 million was recorded against net deferred tax assets in tax jurisdictions where it was more likely than not that the deferred tax assets will not be realized.


Discontinued Operations

During fiscal 2009, the Company announced the intended divestiture of its South Korean-based HVAC business and presented it as held for sale and as a discontinued operation in the consolidated financial statements for all periods presented.  The South Korean-based HVAC business was sold on December 23, 2009 for $10.5 million, resulting in a loss on sale of $0.6 million.  On May 1, 2007, the Company announced it would explore strategic alternatives for its Electronics Cooling business and presented it as held for sale and as a discontinued operation in the consolidated financial statements for all periods presented.  The Electronics Cooling business was sold on May 1, 2008 for $13.2 million, resulting in a gain on sale of $2.5 million.

Segment Results of Operations

Original Equipment Europe

Years ended March 31
 
2010
   
2009
   
2008
 
(dollars in millions)
 
$'s
   
% of sales
   
$'s
   
% of sales
   
$'s
   
% of sales
 
                                     
Net sales
  $ 469       100.0 %   $ 597       100.0 %   $ 758       100.0 %
Cost of sales
    410       87.4 %     520       87.1 %     618       81.5 %
Gross profit
    59       12.6 %     77       12.9 %     140       18.5 %
Selling, general and administrative expenses
    38       8.1 %     49       8.2 %     50       6.6 %
Restructuring (income) charges
    (3 )     -0.6 %     22       3.7 %     -       0.0 %
Impairment of goodwill and long-lived assets
    1       0.2 %     19       3.2 %     5       0.7 %
Income (loss) from continuing operations
  $ 23       4.9 %   $ (13 )     -2.2 %   $ 85       11.2 %

Net sales within the Original Equipment – Europe segment decreased $161 million, or 21.2 percent from fiscal 2008 to fiscal 2009 primarily on a $179 million decline in underlying vehicular sales volumes, partially offset by an $18 million favorable impact of foreign currency exchange rate changes.  The $128 million, or 21.4 percent decline in net sales from fiscal 2009 to fiscal 2010 was based primarily on a 47 percent decline in medium/heavy duty truck sales and a 46 percent decline in agriculture and construction sales volumes.

The decrease in gross margin from fiscal 2008 to fiscal 2009 was largely related to the underabsorption of fixed manufacturing costs with the declining sales volumes and changing mix of products toward lower margin business.  Repositioning costs of $2 million were included in cost of sales in fiscal 2009 related to the closure of the Tübingen, Germany facility.  Gross margin remained relatively consistent from fiscal 2009 to fiscal 2010.  The underabsorption of fixed manufacturing costs as a result of the decrease in sales volumes was offset by the reduction of direct and indirect costs in the manufacturing facilities and the favorable impact of materials pricing.

SG&A expenses were consistent from fiscal 2008 to fiscal 2009.  SG&A expenses decreased $11 million from fiscal 2009 to fiscal 2010 largely due to the positive impact of SG&A cost reduction efforts.  Restructuring charges of $22 million were recorded in fiscal 2009 as the result of a reduction in workforce throughout the European facilities including at the European headquarters in Bonlanden, Germany.  Restructuring income of $3 million was recorded during fiscal 2010 related to the reversal of severance liabilities as the result of favorable benefits negotiations.  A goodwill impairment charge of $9 million was recorded in fiscal 2009, which represents an impairment of the full amount of goodwill recorded within the segment.  This impairment was based on a declining outlook for the segment with sales volumes and lower gross margin related to the underabsorption of fixed manufacturing costs and the change in product mix.  In addition, long-lived asset impairment charges of $10 million were recorded in fiscal 2009 related to certain manufacturing facilities with projected cash flows unable to support their asset bases.

Income from continuing operations decreased $98 million in fiscal 2009 to a loss from continuing operations of $13 million primarily due to the significant decrease in sales and gross margin coupled with the restructuring and asset impairment charges.  The income from continuing operations of $23 million in fiscal 2010 was an improvement of $36 million from fiscal 2009 primarily due to the reduced SG&A expenses and absence of significant restructuring and impairment charges recorded during fiscal 2009.


Original Equipment North America

Years ended March 31
 
2010
   
2009
   
2008
 
(dollars in millions)
 
$'s
   
% of sales
   
$'s
   
% of sales
   
$'s
   
% of sales
 
                                     
Net sales
  $ 413       100.0 %   $ 500       100.0 %   $ 524       100.0 %
Cost of sales
    369       89.3 %     457       91.4 %     494       94.3 %
Gross profit
    44       10.7 %     43       8.6 %     30       5.7 %
Selling, general and administrative expenses
    36       8.7 %     60       12.0 %     67       12.8 %
Restructuring charges
    1       0.2 %     3       0.6 %     4       0.8 %
Impairment of goodwill and long-lived assets
    5       1.2 %     16       3.2 %     27       5.2 %
Income (loss) from continuing operations
  $ 2       0.5 %   $ (36 )     -7.2 %   $ (68 )     -13.0 %

During fiscal 2010, we implemented certain management reporting changes resulting in the realignment of the Fuel Cell segment into the Original Equipment – North America segment.  The previously reported results for the Original Equipment – North America segment have been retrospectively adjusted to reflect these changes for comparative purposes.

Net sales within the Original Equipment – North America segment decreased $24 million, or 4.6 percent, from fiscal 2008 to fiscal 2009, and decreased $87 million, or 17.4 percent, from fiscal 2009 to fiscal 2010.  The sales decline is largely due to the downturn in the North American truck market following the January 1, 2007 emission law change, which has been further exacerbated by the impact of the global recession.  Net sales within this segment continue to be adversely impacted by the depressed heavy duty and medium duty North American truck markets and the automotive vehicular markets.

Gross margin increased from 5.7 percent in fiscal 2008 to 8.6 percent in fiscal 2009, and improved to 10.7 percent in fiscal 2010.  The improved gross margin is primarily attributable to a significant reduction in direct and indirect costs in the North American manufacturing facilities and the positive impact of materials pricing.  In fiscal 2009, we entered into a license agreement with Bloom Energy, a leading developer of fuel cell-based distributed energy systems, under which Bloom Energy licensed our thermal management technology for an up-front fee of $12.0 million.  In addition to licensing this technology, we also provided certain transition services to Bloom Energy, including the sale of products through December 2009.  We received an advance payment of $0.7 million for these transition services, and received additional compensation for the supply of products to Bloom Energy over this time.  The total up-front compensation received of $12.7 million was recognized as revenue over the 15-month term of these agreements, of which $10 million of revenue was recognized during fiscal 2009.  During fiscal 2010, the remaining $2.7 million was recognized as revenue.

SG&A expenses decreased $7 million from fiscal 2008 to fiscal 2009, and decreased a further $24 million in fiscal 2010.  The fiscal 2009 decrease was primarily attributed to the positive impact of SG&A reduction efforts.  The fiscal 2010 decrease is due to additional cost reduction actions and the absence of significant consulting fees incurred in fiscal 2009 in connection with the manufacturing realignment.  Restructuring charges recorded in fiscal 2010 relate to the announced closure of our Harrodsburg, Kentucky manufacturing facility.  The majority of the restructuring charges recorded during fiscal 2009 related to a workforce reduction at the Racine, Wisconsin headquarters.  Fiscal 2008 restructuring charges related to plant closures.  A goodwill impairment charge of $24 million was recorded during fiscal 2008 as a result of a declining outlook for this segment.  These reduced expectations were based on declining sales volumes and lower gross margin related to plant closures, product-line transfers and continued customer pricing pressures that impacted the North American vehicular industry.  In addition, a long-lived asset impairment charge of $3 million was recorded during fiscal 2008 as the result of a program line which was not able to support its asset base.  Long-lived asset impairment charges of $16 million were recorded in fiscal 2009 for a facility with projected cash flows unable to support its asset base, for assets related to a cancelled program, a program that was not able to support its asset base and assets no longer in use.  Asset impairment charges of $5 million recorded during fiscal 2010 related to a program that was not able to support its asset base and the pending closure of the Harrodsburg, Kentucky manufacturing facility, which had a net book value that exceeded its fair value.


Loss from continuing operations improved $32 million in fiscal 2009 to a loss from continuing operations of $36 million primarily due to improved gross margin coupled with the decrease in year-over-year impairment charges.  Results from continuing operations improved $38 million in fiscal 2010 to income from continuing operations of $2 million, based primarily on the improved gross margin, reduction in SG&A expenses and reduced impairment charges.
 
Commercial Products

Years ended March 31
 
2010
   
2009
   
2008
 
(dollars in millions)
 
$'s
   
% of sales
   
$'s
   
% of sales
   
$'s
   
% of sales
 
                                     
Net sales
  $ 170       100.0 %   $ 188       100.0 %   $ 198       100.0 %
Cost of sales
    123       72.4 %     145       77.1 %     154       77.8 %
Gross profit
    47       27.6 %     43       22.9 %     44       22.2 %
Selling, general and administrative expenses
    26       15.3 %     28       14.9 %     32       16.2 %
Restructuring charges
    -       0.0 %     1       0.3 %     -       0.0 %
Impairment of goodwill and long-lived assets
    -       0.0 %     1       0.3 %     3       1.5 %
Income from continuing operations
  $ 21       12.4 %   $ 14       7.4 %   $ 9       4.5 %

Net sales within the Commercial Products segment decreased $10 million, or 5.1 percent, from fiscal 2008 to fiscal 2009, and decreased $18 million, or 9.6 percent in fiscal 2010.  The fiscal 2009 decrease was primarily driven by $12 million of unfavorable foreign currency exchange rate changes, slightly offset by continued strength in air conditioning sales in the United Kingdom and the success of new product launches.  The fiscal 2010 decrease was based primarily on an overall reduction in sales volume with the deterioration in the global economy and a $5.0 million unfavorable impact of foreign currency exchange rate changes.

Gross margin increased from 22.2 percent in fiscal 2008 to 22.9 percent in fiscal 2009, with continued improvement to 27.6 percent in fiscal 2010.  The continued improvement from fiscal 2008 to fiscal 2010 was due to lower material costs, manufacturing cost improvements and productivity initiatives.  SG&A expenses decreased year-over-year from fiscal 2008 through fiscal 2010 due to the positive impact of SG&A reduction efforts.  Long-lived asset impairment charges of $3 million and $1 million were recorded in fiscal 2008 and 2009, respectively, as the result of the cancellation of a product in its development stage.  Income from continuing operations increased $5 million in fiscal 2009 and a further $7 million in fiscal 2010 based on the continued improvement in gross margin and the reduction in SG&A expenses.

South America

Years ended March 31
 
2010
   
2009
   
2008
 
(dollars in millions)
 
$'s
   
% of sales
   
$'s
   
% of sales
   
$'s
   
% of sales
 
                                     
Net sales
  $ 118       100.0 %   $ 136       100.0 %   $ 137       100.0 %
Cost of sales
    94       79.7 %     108       79.4 %     111       81.0 %
Gross profit
    24       20.3 %     28       20.6 %     26       19.0 %
Selling, general and administrative expenses
    15       12.7 %     16       11.8 %     15       10.9 %
Restructuring charges
    1       0.8 %     -       0.0 %     -       0.0 %
Income from continuing operations
  $ 8       6.8 %   $ 12       8.8 %   $ 11       8.0 %

Net sales within South America were consistent from fiscal 2008 to fiscal 2009.  The strength in the Brazilian agricultural and commercial vehicle markets were offset by a $2 million unfavorable impact from foreign currency exchange rate changes.  Net sales decreased $18 million in fiscal 2010 based on reduced sales volumes within Brazil’s commercial vehicles markets, partially offset by the favorable impact of foreign currency exchange rates of $6 million.

Gross margin improved from 19.0 percent in fiscal 2008 to 20.6 percent in fiscal 2009, and decreased slightly to 20.3 percent in fiscal 2010.  The gross margin improvement from fiscal 2008 to fiscal 2009 was the result of performance improvements in the manufacturing facility.  The decrease in fiscal 2010 was due to the underabsorption of fixed costs with the reduced sales volumes.  SG&A expenses increased $1 million from fiscal 2008 to fiscal 2009 due to increased salary costs, and decreased $1 million in fiscal 2010 due to the positive impact of SG&A reduction efforts within the region.  Restructuring charges of $1 million recorded during fiscal 2010 related to a workforce reduction within the Brazilian operations.  Income from continuing operations improved $1 million from fiscal 2008 to fiscal 2009 based on the improved gross margin, and decreased $4 million from fiscal 2009 to fiscal 2010 based on the reduced sales volumes and gross margin decline.


Original Equipment Asia

Years ended March 31
 
2010
   
2009
   
2008
 
(dollars in millions)
 
$'s
   
% of sales
   
$'s
   
% of sales
   
$'s
   
% of sales
 
                                     
Net sales
  $ 32       100.0 %   $ 17       100.0 %   $ 15       100.0 %
Cost of sales
    32       100.0 %     18       105.9 %     14       93.3 %
Gross profit
    -       0.0 %     (1 )     -5.9 %     1       6.7 %
Selling, general and administrative expenses
    5       15.6 %     8       47.1 %     7       46.7 %
Loss from continuing operations
  $ (5 )     -15.6 %   $ (9 )     -52.9 %   $ (6 )     -40.0 %

The Original Equipment – Asia segment is currently in an expansion phase.  Net sales within the Original Equipment – Asia segment increased $2 million in fiscal 2009 and $15 million in fiscal 2010.  The gradual increase in sales is attributed to a growing presence in the region and the completion of construction of new facilities.  The new manufacturing facility in Changzhou, China began production in the third quarter of fiscal 2008, and the Chennai, India facility began production in the second quarter of fiscal 2009.  These facilities are currently in low volume production.  The minimal gross margin is due to inefficiencies at these start-up facilities.  SG&A expenses increased $1 million in fiscal 2009 and decreased $3 million in fiscal 2010.  The increase in SG&A in 2009 was due to ongoing expansion in this region with the construction of new manufacturing facilities in China and India, as well as growth of the corporate office in China.  The decrease in SG&A in fiscal 2010 resulted from positive cost reduction efforts within the region.

Liquidity and Capital Resources

Our primary sources of liquidity are cash flows from operating activities and borrowings under lines of credit provided by banks in the United States and abroad.  On September 30, 2009, we completed a public offering of 13.8 million shares of our common stock, including 1.8 million shares issued pursuant to the fully exercised underwriters’ option to purchase additional shares, at a price of $7.15 per share.  The proceeds of the common stock offering were $92.9 million, after deducting underwriting discounts, commissions, legal, accounting and printing fees of $5.8 million.  On December 23, 2009, we sold 100 percent of the shares of our South Korea-based HVAC business for net cash proceeds of $10.5 million.

During fiscal 2010, the Company reported cash flows from operating activities of $61.9 million, which is $31.6 million lower than the $93.5 million reported in the prior year.  Operating results improved year-over-year, due to reduced SG&A expenses and the absence of significant asset impairment and restructuring charges similar to those incurred in fiscal 2009.  Despite the improvement in our operating results, net cash provided by operating activities decreased due to investment in working capital balances during fiscal 2010.  The most significant working capital increase was in accounts receivable, which reduced operating cash flows by $52.1 million as we invested in accounts receivable to support an increase in net sales in the fourth quarter of fiscal 2010 as compared to the fourth quarter of fiscal 2009.  Fourth quarter fiscal 2010 net sales were $70.1 million higher than the same quarter for the prior fiscal year.  Despite the increase in accounts receivable, days sales outstanding improved 4 days to 43 days through the continued active, customer-supported management of accounts receivable payment terms.

Outstanding indebtedness decreased $110.0 million to $139.2 million at March 31, 2010 from the March 31, 2009 balance of $249.2 million.  We were required to prepay our outstanding revolving credit facility and Senior Note borrowings with 50 percent of the net proceeds from the common stock offering, resulting in a mandatory prepayment of $46.4 million.  In conjunction with the mandatory prepayment of the Senior Note borrowings, we were required to pay a prepayment penalty of $3.4 million to the holders of the Senior Notes.  In addition to the mandatory prepayment, we voluntarily repaid the majority of our outstanding revolving credit facility with a portion of the proceeds from the common stock offering and the sale of our South Korea-based HVAC business.  Cash balances increased $0.2 million from $43.5 million at March 31, 2009 to $43.7 million at March 31, 2010.


We have $130.6 million available for future borrowings under our domestic revolving credit facility.  In addition to this revolving credit facility, unused lines of credit also exist in Europe and Brazil totaling $36.5 million at March 31, 2010.  In the aggregate, total available lines of credit of $167.1 million exist at March 31, 2010.  On May 10, 2010, Modine Holding GmbH and Modine Europe GmbH, each a subsidiary of the Company, entered into a 15.0 million euro ($19.2 million U.S. equivalent) Credit Facility Agreement to replace an existing 15.0 million euro credit agreement.  The availability of funds under the credit facilities is subject to our ability to remain in compliance with the financial covenants and limitations in our respective debt agreements.

We believe that our internally generated operating cash flows, working capital management efforts and existing cash balances, together with access to available external borrowings, will be sufficient to satisfy future operating costs and capital expenditures.

Intercreditor Agreement

During fiscal 2010, we generated positive cash flows from operations.  We used this cash, plus the proceeds from the common stock offering and the sale of our South Korea-based HVAC business, to voluntarily repay the majority of our domestic revolving credit facility.  At March 31, 2010, there was $7.5 million outstanding under the revolving credit facility, which represents a significant reduction from the $87.0 million outstanding balance at March 31, 2009.  In addition, at March 31, 2010, we had $121.5 million outstanding on the senior notes.

In conjunction with the First Amendment to Credit Agreement and Waiver with our primary lenders and Waiver and Second Amendment to the Note Purchase Agreements with the senior note holders each dated as of February 17, 2009, the primary lenders and senior note holders entered into a Collateral Agency and Intercreditor Agreement, to which we consented.  This agreement provides for the sharing of payments received in respect of the collateral and the guarantees provided by the Company to the primary lenders and senior note holders.  On September 18, 2009, the primary lenders and senior note holders entered into a First Amendment to Collateral Agency and Intercreditor Agreement (“Intercreditor Agreement”), to which we consented.  Under the terms of the Intercreditor Agreement, 90 days after the expiration of our revolving credit facility in July 2011, certain actions may be required in order to preserve a stated ratio relative to the Company’s indebtedness to the primary lenders on the one hand and the senior note holders on the other.  This portion of the Intercreditor Agreement, if triggered, would require the primary lenders to pay the senior note holders to preserve the relative position of those two groups that existed when the Intercreditor Agreement was executed.  If the outstanding balance on the revolving credit facility at that time is the same as it was as of March 31, 2010, the primary lenders would be required to pay approximately $42 million to the senior note holders in October 2011.

We currently plan to refinance our revolving credit facility prior to its expiration in July 2011.  In the unlikely event that we were unable to complete this refinancing prior to October 2010 (one year prior to the potential rebalancing described above), and if the Intercreditor Agreement terms remain in their current state, we may be required to classify the above-described payment from the primary lenders to the senior note holders as a current liability in our Consolidated Balance Sheet.  This current liability classification may be required as we may need to reimburse the primary lender for the rebalancing payment made to the senior note holders.  If that were to occur, we believe that our existing cash balances, internally generated operating cash flows and availability on our revolving credit facilities would be sufficient to fund this required payment and any potential associated obligations.

Debt Covenants

Our debt agreements require us to maintain compliance with various covenants.  One restrictive limitation is a minimum adjusted earnings before interest, taxes, depreciation and amortization (“EBITDA”) covenant.  Adjusted EBITDA is defined as our (loss) earnings from continuing operations before interest expense and provision for income taxes, adjusted to exclude unusual, non-recurring or extraordinary non-cash charges and up to $34.0 million of cash restructuring and repositioning charges and further adjusted to add back depreciation and amortization expense. Adjusted EBITDA does not represent, and should not be considered, an alternative to (loss) earnings from continuing operations as determined by generally accepted accounting principles (GAAP), and our calculation may not be comparable to similarly titled measures reported by other companies.  For the four consecutive quarters ended March 31, 2010, we were required to maintain adjusted EBITDA of $35.0 million.  Our adjusted EBITDA for the four consecutive quarters ended March 31, 2010 was $86.2 million, which exceeded the minimum adjusted EBITDA requirement by $51.2 million.  The following table presents a calculation of adjusted EBITDA:


(dollars in thousands)
   
Quarter Ended June 30, 2009
   
Quarter Ended September 30, 2009
   
Quarter Ended December 31, 2009
   
Quarter Ended March 31, 2010
   
Total
 
(Loss) earnings from continuing operations
  $ (5,642 )   $ (4,886 )   $ 2,125     $ (11,895 )   $ (20,298 )
Consolidated interest expense
    5,459       9,643       3,793       3,993       22,888  
Provision for income taxes
    1,016       871       238       7,707       9,832  
Depreciation and amortization expense (a)
    15,755       16,183       16,045       15,329       63,312  
Non-cash (income) charges (b)
    (2,036 )     3,264       583       4,662       6,473  
Restructuring and repositioning charges (income) (c)
    2,263       (2,334 )     2,463       1,557       3,949  
Adjusted EBITDA
  $ 16,815     $ 22,741     $ 25,247     $ 21,353     $ 86,156  

 
(a)
Depreciation and amortization expense represents total depreciation and amortization from continuing operations less accelerated depreciation that has been included in non-cash charges described in footnote (b) below.

 
(b)
Non-cash (income) charges are comprised of long-lived asset impairments, non-cash restructuring and repositioning charges, exchange gains or losses on inter-company loans and non-cash charges that are unusual, non-recurring or extraordinary, as follows:

(dollars in thousands)
   
Quarter Ended June 30, 2009
   
Quarter Ended September 30, 2009
   
Quarter Ended December 31, 2009
   
Quarter Ended March 31, 2010
   
Total
 
Long-lived asset impairments
  $ 994     $ 3,849     $ 273     $ 1,432     $ 6,548  
Non-cash restructuring and repositioning charges
    820       767       718       1,006       3,311  
Exchange (gains) losses on intercompany loans
    (3,871 )     (1,226 )     (412 )     1,939       (3,570 )
Provision for uncollectible notes receivable
    (59 )     (327 )     4       (214 )     (596 )
Supplemental executive retirement plan settlement
    80       201       -       499       780  
Non-cash charges
  $ (2,036 )   $ 3,264     $ 583     $ 4,662     $ 6,473  

 
(c)
Restructuring and repositioning charges (income) represent cash restructuring and repositioning costs incurred in conjunction with the restructuring activities announced on or after January 31, 2008.  See Note 14 of the Notes to Consolidated Financial Statements for further discussion on these activities.

In addition to the minimum adjusted EBITDA covenant, we are not permitted to incur capital expenditures greater than $70.0 million for fiscal 2010 and for all fiscal years thereafter.  The Company was in compliance with the capital expenditures limitation in fiscal 2010 based on actual capital expenditures of $60.3 million.  We expect to remain in compliance with this covenant for fiscal 2011 and beyond.

Beginning with the fourth quarter of fiscal 2010, we are subject to an adjusted EBITDA to interest expense (interest expense coverage ratio) covenant and a debt to adjusted EBITDA (leverage ratio) covenant as follows:


   
Interest Expense Coverage Ratio Covenant (Not Permitted to Be Less Than):
 
Leverage Ratio Covenant (Not Permitted to Be Greater Than):
Fiscal quarter ended March 31, 2010
 
1.50 to 1.0
 
7.25 to 1.0
Fiscal quarter ending June 30, 2010
 
2.00 to 1.0
 
5.50 to 1.0
Fiscal quarter ending September 30, 2010
 
2.50 to 1.0
 
4.75 to 1.0
Fiscal quarter ending December 31, 2010
 
3.00 to 1.0
 
3.75 to 1.0
Fiscal quarters ending March 31, 2011 and June 30, 2011
 
3.00 to 1.0
 
3.50 to 1.0
All fiscal quarters ending thereafter
 
3.00 to 1.0
 
3.00 to 1.0

Our interest expense coverage ratio for fiscal 2010 was 4.38, which exceeded the minimum requirement of 1.50.  The following table presents a calculation of our interest expense coverage ratio:

   
Four Quarters Ended
March 31, 2010
 
       
Consolidated interest expense
  $ 22,888  
Less: Prepayment penalty classified as interest
    (3,449 )
Plus: Other items (a)
    213  
Total consolidated interest expense
  $ 19,652  
         
Adjusted EBITDA
  $ 86,156  
         
Interest expense coverage ratio
    4.38  

 
(a)
Other items include line of credit fees and costs associated with the sale of receivables.

Our leverage ratio for fiscal 2010 was 1.69, which was below the maximum allowed ratio of 7.25.  The following table presents a calculation of our leverage ratio:

   
Four Quarters Ended
March 31, 2010
 
       
Debt per balance sheet
  $ 139,197  
Less: Cash collateral on commodity derivatives
    (4,000 )
Plus: Indebtedness attributed to sales of accounts receivable
    3,326  
Commodity derivative liability
    1,243  
Standby letters of credit
    5,968  
Total consolidated debt
  $ 145,734  
         
Adjusted EBITDA
  $ 86,156  
         
Leverage ratio
    1.69  

We expect to remain in compliance with the interest expense coverage ratio covenant and leverage ratio covenant during fiscal 2011 and through the term of the revolving credit facility based on our projected financial results.

Off-Balance Sheet Arrangements

None.


Contractual Obligations

(in thousands)
 
March 31, 2010
 
   
Total
   
Less than 1 year
   
1 - 3 years
   
4 - 5 years
   
More than 5 years
 
                               
Long-term debt
  $ 136,186     $ 234     $ 36,198     $ 56,641     $ 43,113  
Interest associated with long-term debt
    56,043       12,975       23,537       15,041       4,490  
Capital lease obligations
    7,243       238       516       562       5,927  
Operating lease obligations
    12,620       4,442       3,431       1,749       2,998  
Capital expenditure commitments
    29,578       26,905       2,602       71       -  
Other long-term obligations
    6,711       1,040       130       130       5,411  
Total contractual obligations
  $ 248,381     $ 45,834     $ 66,414     $ 74,194     $ 61,939  

Interest for the revolving credit facility is calculated using a weighted average interest rate of 4.99 percent.  Interest for the fixed-rate notes is calculated using the contractual interest rates of 10.0 percent for $60.7 million of the notes and 10.75 percent for $60.7 million of the notes.

As further discussed under “Liquidity and Capital Resources,” under the terms of the Intercreditor Agreement, as amended, the primary lenders may be required to pay approximately $42 million to the senior note holders in October 2011 if a rebalancing of the Company’s indebtedness to the primary lenders and the senior note holders is required.  If this rebalancing becomes necessary, it would increase the debt maturities in the 1 to 3 years column.

The capital expenditure commitments consist primarily of tooling and equipment expenditures for new and renewal platforms with new and current customers on a global basis.

Our gross liability for uncertain tax positions and pension obligation were $4.5 million and $86.1 million, respectively, as of March 31, 2010.  We are unable to determine the ultimate timing of these liabilities and have therefore excluded from the contractual obligations table above.  

Net Cash Provided by Operating Activities

Net cash provided by operating activities in fiscal 2010 was $61.9 million which decreased $31.6 million from the prior year of $93.5 million, driven by an increase in working capital consistent with the modest growth in volumes throughout fiscal 2010.  The most significant change in operating assets and liabilities contributing to the overall decrease in cash provided by operating activities in fiscal 2010 was a $52.1 million increase in accounts receivable based on an increase in net sales of $70.1 million for the fourth quarter of fiscal 2010 as compared to the same quarter for fiscal 2009.

Net cash provided by operating activities in fiscal 2009 was $93.5 million which increased $11.8 million from the prior year of $81.7 million, driven by working capital management partially offset by a reduction in earnings.  Major changes in operating assets and liabilities contributing to the overall increase in cash provided by operating activities in fiscal 2009 were a $117.5 million decrease in accounts receivable based on active management of accounts receivables including the sale of receivables and an $11.8 million year-over-year increase in cash due to a decrease in inventories in response to lower sales volumes.  These increases were partially offset by a $52.3 million decrease in accounts payable due to timing of payments and less activity due to lower sales and a $5.3 million decrease from income taxes.

Capital Expenditures

Capital expenditures were $60.3 million for fiscal 2010, which was $43.0 million lower than the prior year.  The primary spending occurred in the Original Equipment – Europe segment, which totaled $36.6 million, the Original Equipment – North America segment, which totaled $12.9 million and the Original Equipment – Asia segment, which accounted for $8.0 million in capital spending.  Capital spending in fiscal 2010 included tooling and equipment purchases in conjunction with new global program launches with new and current customers in Europe, Asia and North America, along with completion of construction of new facilities in Asia and Europe.  Capital expenditures of $60.3 million for fiscal 2010 were below the $70.0 million limitation in our primary debt agreements.


Capital expenditures were $103.3 million for fiscal 2009, which was $13.9 million higher than the prior year.  The primary spending occurred in the Original Equipment – North America segment,which totaled $25.9 million, the Original Equipment – Europe segment, which totaled $54.5 million and the Original Equipment – Asia segment, which accounted for $16.0 million in capital spending.  The increase in capital expenditures primarily related to tooling and equipment purchases in conjunction with new global program launches with new and current customers in Europe, Asia and North America, along with the construction of new facilities in Asia and Europe.

Capital expenditures were $89.4 million for fiscal 2008.  The primary spending occurred in the Original Equipment – North America segment, which totaled $25.1 million, the Original Equipment – Europe segment, which totaled $35.9 million and the Original Equipment – Asia segment, which accounted for $15.2 million in capital spending.  The increase in capital expenditures during the period primarily related to tooling and equipment purchases in conjunction with new global program launches with new and current customers in Europe, Asia and North America, along with the construction of new facilities in Asia and Europe.

Proceeds from the Sale of Discontinued Operations

Modine received net cash proceeds of $10.5 million for the sale of the shares of its South Korea-based HVAC business during fiscal 2010.  Modine received cash of $10.6 million and subordinated promissory notes totaling $2.5 million for the sale of the assets of its Electronics Cooling business during fiscal 2009.  Refer to Note 13 of the Notes to Consolidated Financial Statements for further discussion of these divestitures.
 
Proceeds from the Disposition of Assets

In fiscal 2010, the Company sold its 50 percent ownership of Anhui Jianghaui Mando Climate Control Co. Ltd. for $4.9 million, and the Company received $3.8 million from the disposition of other assets.

In fiscal 2009, the Company received proceeds from disposition of assets of $7.1 million, including approximately $3.7 million from the sale of a corporate aircraft and $3.4 million from the sale of other assets.

In fiscal 2008, the Company received proceeds from the disposition of assets of $10.0 million, including approximately $5.0 million from the sale of a corporate aircraft, $3.2 million from the sale of the Richland, South Carolina facility that closed in fiscal 2007, and $1.8 million from the sale of other equipment.

Changes in Total Debt

In fiscal 2010, total debt decreased $110.0 million, primarily with the proceeds from the common stock offering and the sale of our South Korea-based HVAC business.  Domestically, debt decreased by $107.6 million.  International debt decreased by $2.4 million during fiscal 2010 through reductions in short-term borrowings at the foreign subsidiaries.

In fiscal 2009, total debt increased $24.7 million primarily from new borrowings in North America.  Domestically, debt grew by $18.0 million with borrowings on the revolving credit facility used primarily to fund capital expenditures.  International debt increased $6.7 million during fiscal 2009 through short-term borrowings at the foreign subsidiaries.

In fiscal 2008, total debt increased $47.2 million primarily from new borrowings in North America.  Domestically, debt grew by $43.0 million with borrowings on the revolving credit facility used primarily to fund capital expenditures.  International debt increased $4.2 million during fiscal 2008.

Common Stock and Treasury Stock

On September 30, 2009, the Company completed a public offering of 13.8 million shares of its common stock at a price of $7.15 per share.  Cash proceeds were $92.9 million after deducting underwriting discounts, commissions, legal, accounting and printing fees of $5.8 million.  

The Company repurchased approximately 5,000 and 54,000 common shares for treasury at a cost of $0.03 million and $0.6 million in fiscal 2010 and 2009, respectively.  During fiscal 2008, the Company repurchased and retired 250,000 shares of the Company’s common stock for $6.9 million under the anti-dilution portion of a common share repurchase program.  In addition, the Company repurchased approximately 42,000 common shares for treasury at a cost of $0.8 million in fiscal 2008.  The Company’s amended debt agreements with its primary lenders and note holders prohibit future acquisitions by the Company of shares of its common stock.  Common stock and treasury stock activity is further detailed in Note 22 of the Notes to Consolidated Financial Statements.


Dividends Paid

On February 17, 2009, the Company announced that it has suspended its quarterly cash dividend on its common stock indefinitely as required by the amended debt agreements.  As a result, the Company paid no dividends in fiscal 2010.  Dividends paid on our common stock were $9.7 million for fiscal 2009 and $22.6 million for fiscal 2008.  The effective dividend rates paid were 30 cents per share for fiscal 2009 and 70 cents per share for fiscal 2008.

Settlement of Derivative Contracts

The Company entered into future contracts related to forecasted purchases of aluminum and natural gas that are treated as cash flow hedges.  Unrealized gains and losses on these contracts are deferred as a component of accumulated other comprehensive (loss) income, and recognized as a component of earnings at the same time that the underlying purchases of aluminum and natural gas impact earnings.  During fiscal 2010, 2009 and 2008, $5.9 million, $4.5 million and $2.0 million of expense, respectively, was recorded in cost of sales related to the settlement of certain futures contracts.  At March 31, 2010, $2.0 million of unrealized losses remain deferred in other comprehensive (loss) income, and will be realized as a component of cost of sales over the next 63 months.  The Company also entered into future contracts related to forecasted purchases of copper and nickel which are not designated as cash flow hedges.  Therefore, gains and losses on these contracts are recorded directly in the consolidated statement of operations.  There was no income or expense recorded in fiscal 2010 related to future contracts for copper or nickel.  During fiscal 2009 and 2008, $4.4 million of expense and $0.2 million of income, respectively, was recorded in cost of sales related to these future contracts.  In fiscal 2009, the Company also entered into zero cost collars to offset the foreign exchange exposure on inter-company loans.  These contracts were not designated as hedges; accordingly transaction gains and losses on the derivatives are recorded in other income – net in the consolidated statement of operations.  During fiscal 2009, $1.4 million of income was recorded to other income – net in the consolidated statement of operations related to these zero cost collars.  The Company did not enter into zero cost collars to offset foreign exchange exposure on inter-company loans during fiscal 2010.

In fiscal 2007, the Company entered into two forward-starting swaps in anticipation of a $75.0 million private placement debt offering that occurred on December 7, 2006.  These swaps were settled during fiscal 2007 with a loss of $1.8 million being recorded.  This loss was reflected as a component of accumulated other comprehensive (loss) income and is being amortized to interest expense over the respective lives of the debt offerings.  During fiscal 2010 and 2009, $0.9 million and $0.3 million of this loss, respectively, was recognized as interest expense.  The expense for fiscal 2010 includes $0.5 million of amortization in proportion with the mandatory prepayment of the senior notes on September 30, 2009.  At March 31, 2010, $0.6 million of the loss is deferred in accumulated other comprehensive (loss) income, net of taxes.
 
Research and Development
 
We focus our research and development (“R&D”) efforts on solutions that meet the most current and pressing heat transfer needs of OEMs and other customers within the commercial vehicle, construction, agricultural and commercial HVAC industries and, more selectively, within the automotive industry.  Our products and systems typically are aimed at solving difficult and complex heat transfer challenges requiring advanced thermal management.  The typical demands are for products and systems that are lighter weight, more compact, more efficient and more durable in nature to meet ever increasing customer standards as customers work to ensure compliance with increasingly stringent global emissions requirements.  Our Company’s heritage includes depth and breadth of expertise in thermal management that, combined with our global manufacturing presence, standardized processes, and state-of-the-art technical centers and wind tunnels, enables us to rapidly bring customized solutions to customers at the best value.

Our investment in R&D in fiscal 2010 was $56.9 million, or 4.9 percent of sales, compared to $73.2 million, or 5.2 percent of sales, in fiscal 2009.  This level of investment reflects the Company’s continued commitment to R&D in an ever-changing market, balanced with a near-term focus on preserving cash and liquidity through more selective capital investment.  Consistent with the streamlining of the Company’s product portfolio, our current research is focused primarily on company-sponsored development in the areas of powertrain cooling, engine products and commercial HVAC products.


Recent R&D projects have included development of waste heat recovery systems developed for major U.S.-based engine and truck manufacturers in conjunction with the U.S. Department of Energy to help engine and truck manufacturers meet ever increasing demands for emissions reduction, while simultaneously improving powertrain efficiency and, thus, fuel economy; next generation aluminum radiators for the commercial vehicle, agricultural and constructions markets; and EGR technology, which enables our customers to efficiently meet tighter regulatory emissions standards.

Through our proactive R&D, we are developing new technologies designed to keep our customers within federal and international guidelines and regulations well into the future.  In late fiscal 2009, we also formed an Advanced Solutions Research team that is focused on identifying external research projects that complement strategic internal research initiatives, some of which are government-sponsored, in order to further leverage the Company’s significant thermal technology expertise and capability.
 
Modine has been granted more than 2,000 worldwide patents over the life of the Company.  Modine is focused on the long-term commercialization of our intellectual property and research, and believes that these investments will result in new and next generation products and technologies.
 
Critical Accounting Policies
 
The following critical accounting policies reflect the more significant judgments and estimates used in preparing the financial statements.  Application of these policies results in accounting estimates that have the greatest potential for a significant impact on Modine's financial statements.  The following discussion of these judgments and estimates is intended to supplement the Significant Accounting Policies presented in Note 2 of the Notes to Consolidated Financial Statements.
 
Revenue Recognition
 
The Company recognizes revenue, including agreed upon commodity price increases, as products are shipped to customers and the risks and rewards of ownership are transferred to our customers.  The revenue is recorded net of applicable provisions for sales rebates, volume incentives, and returns and allowances.  At the time of revenue recognition, the Company also provides an estimate of potential bad debts and warranty expense.  The Company bases these estimates on historical experience, current business trends and current economic conditions.  The Company recognizes revenue from various licensing agreements when earned except in those cases where collection is uncertain, or the amount cannot reasonably be estimated until formal accounting reports are received from the licensee.
 
Contractual commodity price increases may also be included in revenue.  Price increases agreed upon in advance are recognized as revenue when the products are shipped to our customers.  In certain situations, the price increases are recognized as revenue at the time products are shipped in accordance with the contractual arrangements with our customers, but are offset by appropriate provisions for estimated commodity price increases which may ultimately not be collected.  These provisions are established based on historical experience, current business trends and current economic conditions.  There was no provision for estimated commodity price increases at March 31, 2010 and 2009.
 
Impairment of Long-Lived and Amortized Intangible Assets
 
The Company performs impairment evaluations of its long-lived assets, including property, plant and equipment, intangible assets with finite lives and equity investments, whenever business conditions or events indicate that those assets may be impaired.  The Company considers factors such as operating losses, declining outlooks and market capitalization when evaluating the necessity for an impairment analysis.  When the estimated future undiscounted cash flows to be generated by the assets are less than the carrying value of the long-lived assets, or the decline in value is considered to be “other than temporary”, the assets are written down to fair market value and a charge is recorded to current operations.  Fair market value is estimated in various ways depending on the nature of the assets under review.  This value can be based on appraised value, estimated salvage value, sales price under negotiation or estimated cancellation charges, as applicable.  The Company recorded long-lived asset and equity investment impairment charges of $6.5 million, $34.7 million and $11.6 million during fiscal 2010, 2009 and 2008, respectively.
 
The most significant long-lived assets that have been subject to impairment evaluations are the Company’s net property, plant and equipment, which totaled $418.6 million at March 31, 2010.  Within property, plant and equipment, the most significant assets evaluated are buildings and improvements, and machinery and equipment.  The Company evaluates impairment at the lowest level of separately identifiable cash flows, which is generally at the manufacturing plant level.  The Company monitors its manufacturing plant performance to determine whether indicators exist that would require an impairment evaluation for the facility.  This includes significant adverse changes in plant profitability metrics; substantial changes in the mix of customer programs manufactured in the plant, consisting of new program launches, reductions, and phase-outs; and shifting of programs to other facilities under the Company’s manufacturing realignment strategy.  When such indicators are present, the Company performs an impairment evaluation by comparing the estimated future undiscounted cash flows expected to be generated in the manufacturing facility to the net book value of the long-lived assets within that facility.  The undiscounted cash flows are estimated based on the expected future cash flows to be generated by the manufacturing facility over the remaining useful life of the machinery and equipment within that facility.  When the estimated future undiscounted cash flows are less than the net book value of the long-lived assets, such assets are written down to fair market value, which is generally estimated based on appraisals or estimated salvage value.
 

The majority of the long-lived asset impairment charges during fiscal 2010, 2009 and 2008 have been recorded within the Company’s Original Equipment – Europe and Original Equipment – North America segments.  These segments have experienced the most significant adverse impact of sales volume declines and changing mix of programs within the manufacturing facilities.  In addition, these segments had program phase-outs and cancellations, many of which were in the automotive markets.  Further unanticipated adverse changes in these segments could result in the need to perform additional impairment evaluations in the future.
 
The Company’s four-point plan is designed to attain a more competitive cost base and improve the Company’s longer term competitiveness, and this plan reduces the risk of potential long-lived asset impairment charges in the future.  The manufacturing realignment strategy of this plan is designed to improve the utilization of the Company’s facilities, with fewer facilities, but operating at higher capacities.  The portfolio rationalization strategy of this plan is designed to identify products where the Company can earn a sufficient return on its investment, and divest or exit products which do not meet required financial metrics.  Recent portfolio rationalization actions include a phase out of automotive powertrain cooling within North America and module/automotive powertrain cooling within Europe.  These strategies create better facility utilization and greater profitability in product mix, which are designed to allow the manufacturing facilities to withstand more significant adverse changes before an impairment charge is necessary.
 
Impairment of Goodwill and Indefinite-Lived Intangible Assets
 
Impairment tests are conducted at least annually unless business events or other conditions exist which would require a more frequent evaluation.  The Company considers factors such as operating losses, declining outlooks and market capitalization when evaluating the necessity for an impairment analysis.  The annual review of goodwill and other intangible assets with indefinite lives for impairment is conducted in the third quarter.  The recoverability of goodwill and other intangible assets with indefinite lives is determined by estimating the future discounted cash flows of the reporting unit to which the goodwill and other intangible assets with indefinite lives relates.  The rate used in determining discounted cash flows is a rate corresponding to our cost of capital, adjusted for risk where appropriate.  In determining the estimated future cash flows, current and future levels of income are considered as well as business trends and market conditions.  To the extent that book value exceeds the fair value, an impairment is recognized.  During fiscal 2009 it was determined that the Original Equipment – Europe segment goodwill was fully impaired, necessitating a charge of $9.0 million.  During fiscal 2008 it was determined that the Original Equipment – North America segment goodwill was fully impaired, necessitating a charge of $23.8 million.
 
At March 31, 2010 the Company had goodwill of $29.6 million recorded which was primarily comprised of $13.9 million within the South America segment and $15.2 million within the Commercial Products segment.  The South America and Commercial Products segments reported operating income of $7.6 million and $20.5 million for fiscal 2010 compared to $11.9 million and $14.5 million for fiscal 2009, respectively.  Despite the current global economic conditions, these segments have reported and continue to forecast strong financial results.  The future discounted cash flows of these segments continue to substantially exceed their carrying value indicating that the goodwill recorded in these segments is fully realizable at March 31, 2010.  If, in future periods, these segments experience a significant unanticipated economic downturn in the markets in which they operate, this would require an impairment review.
 

Warranty

Estimated costs related to product warranties are accrued at the time of the sale and recorded in cost of sales.  Estimated costs are based on the best information available, which includes using statistical and analytical analysis of both historical and current claim data.  Original estimates, accrued at the time of sale, are adjusted when it becomes probable that expected claims will differ materially from these initial estimates.

Tooling Costs

Pre-production tooling costs incurred by the Company in manufacturing products under various customer programs are capitalized as a component of property, plant and equipment, net of any customer reimbursements, when the Company retains title to the tooling.  These costs are amortized over the program life and are recorded in cost of sales in the consolidated statements of operations.  For customer-owned tooling costs incurred by the Company, a receivable is recorded when the customer has guaranteed reimbursement to the Company.  The reimbursement period may vary by program and customer.  No significant arrangements existed during the years ended March 31, 2010 and 2009 where customer-owned tooling costs were not accompanied by guaranteed reimbursements.

Assets Held for Sale

Assets or businesses are considered to be held for sale when management approves and commits to a formal plan to actively market the assets or business for sale at a sale price reasonable in relation to its fair value, the asset or business is available for immediate sale in its present condition, the sale of the asset or business is probably and expected to be comleted within one year and it is unlikely that significant changes will be made to the plan.  Upon designation as held for sale, the carrying value of the assets of the business are recorded at the lower of their carrying value or their estimated fair value, less costs to sell.  The Company ceases to record depreciation expense at the time of designation as held for sale.  The Company classified the South Korean business as held for sale at March 31, 2009.  Certain facilities which the Company has closed or intends to close and are currently marketing for sale were classified as held for sale at March 31, 2010.

Pensions and Postretirement Benefits Plans

The calculation of the expense and liabilities of Modine's pension and postretirement plans is dependent upon various assumptions.  The most significant assumptions include the discount rate, long-term expected return on plan assets, and future trends in healthcare costs.  The selection of assumptions is based on historical trends and known economic and market conditions at the time of valuation.  In accordance with generally accepted accounting principles, actual results that differ from these assumptions are accumulated and amortized over future periods.  These differences may impact future pension or postretirement benefit expenses and liabilities.  The Company replaced the existing defined benefit pension plan with a defined contribution plan for salaried-paid employees hired on or after January 1, 2004.  The Modine Salaried Employee Pension Plan was modified so that no service performed after March 31, 2006 would be counted when calculating an employee’s years of credited service under the pension plan formula.  During fiscal 2008, the plan was modified so that no increases in annual earnings after December 31, 2007 would be included in calculating the average annual portion under the pension plan formula.  We believe the defined contribution plan will, in general, allow the Company a greater degree of flexibility in managing retirement benefit costs on a long-term basis.

For the following discussion regarding sensitivity of assumptions, all amounts presented are in reference to the domestic pension plans since the domestic plans comprise 100 percent of the Company’s total benefit plan assets and the large majority of the Company’s pension plan expense.

To determine the expected rate of return, Modine considers such factors as (a) the actual return earned on plan assets, (b) historical rates of returns on the various asset classes in the plan portfolio, (c) projections of returns on those asset classes, (d) the amount of active management of the assets, (e) capital market conditions and economic forecasts, and (f) administrative expenses covered by the plan assets.  The long-term rate of return utilized in fiscal 2010 and fiscal 2009 was 7.90 percent.  For fiscal 2011, the Company has assumed a rate of 8.10 percent.  The impact of a 25 basis point decrease in the expected rate of return on assets would result in a $0.5 million increase in fiscal 2011 pension expense.

The discount rate reflects rates available on long-term, high quality fixed-income corporate bonds, reset annually on the measurement date of March 31.  For fiscal 2010, the Company used a discount rate of 5.93 percent, reflecting a decrease from 7.73 percent in fiscal 2009.  The Company based this decision on a yield curve that was created following an analysis of the projected cash flows from the affected plans.  See Note 4 of the Notes to Consolidated Financial Statements for additional information.  Changing Modine’s discount rate by 25 basis points would impact the fiscal 2011 domestic pension expense by approximately $0.6 million.


A key determinant in the amount of the postretirement benefit obligation and expense is the healthcare cost trend rate.  The healthcare trend rate for fiscal year 2010 was 7.50 percent, and the Company expects this to be 6.75 percent for fiscal 2011.  This rate is projected to decline gradually to 5 percent in fiscal year 2014 and remain at that level thereafter.  An annual "cap" that was established for most retiree healthcare and life insurance plans between fiscal 1994 and 1996 limits Modine’s liability.  Beginning in February 2002, the Company discontinued providing postretirement benefits for salaried and non-union employees hired on or after that date.  Furthermore, effective January 1, 2009, the plan was modified to eliminate coverage for retired participants that are Medicare eligible.  A one percent increase in the healthcare trend rate would result in no substantial increase in postretirement expense and an increase in postretirement benefit obligations of approximately $0.3 million.

Other Loss Reserves

The Company has a number of other loss exposures, such as environmental and product liability claims, litigation, self-insurance reserves, recoverability of deferred income tax benefits, and accounts receivable loss reserves.  Establishing loss reserves for these matters requires the use of estimates and judgment to determine the risk exposure and ultimate potential liability.  The Company estimates these reserve requirements by using consistent and suitable methodologies for the particular type of loss reserve being calculated.  See Note 26 of the Notes to Consolidated Financial Statements for additional details of certain contingencies and litigation.
 
Forward-Looking Statements
 
This report, including, but not limited to, the discussion under “Outlook” under Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations, contains statements, including information about future financial performance, accompanied by phrases such as “believes,” “estimates,” “expects,” “plans,” “anticipates,” “intends,” and other similar “forward-looking” statements, as defined in the Private Securities Litigation Reform Act of 1995.  Modine’s actual results, performance or achievements may differ materially from those expressed or implied in these statements, because of certain risks and uncertainties, including, but not limited to, those described under “Risk Factors” in Item 1A. in Part I. in this report.  Other risks and uncertainties include, but are not limited to, the following:

·
Economic, social and political conditions, changes and challenges in the markets where Modine operates and competes (including currency exchange rate fluctuations (particularly the value of the euro relative to the U.S. dollar), tariffs, inflation, changes in interest rates, recession, and restrictions associated with importing and exporting and foreign ownership);

·
The impact on Modine of increases in commodity prices, particularly Modine’s exposure to the changing prices of aluminum and copper;

·
Modine’s ability or inability to pass increasing commodity prices on to customers as well as the inherent lag in timing of such pass-through pricing;

·
Modine’s ability to remain in compliance with its debt agreements and financial covenants going forward;

·
The impact the weak global economy is having on Modine, its customers and its suppliers and any worsening of such economic conditions;

·
Modine’s ability to fund its liquidity requirements and meet its long-term commitments given the continued decline and disruption in the credit markets due to the world-wide credit risks;

·
The secondary effects on Modine’s future cash flows and liquidity that may result from the manner in which Modine’s customers and lenders deal with the economic crisis and its consequences;

·
Modine’s ability to limit capital spending;

·
Modine’s ability to successfully implement restructuring plans and drive cost reductions as a result;


·
Modine’s ability to maintain adequate liquidity to carry out restructuring plans while investing for future growth;

·
Modine’s ability to satisfactorily service its customers during the implementation and execution of any restructuring plans and/or new product launches;

·
Work stoppages or interference at Modine or Modine’s major customers;

·
Modine’s ability to avoid or limit inefficiencies in the transitioning of products from production facilities to be closed to other existing or new production facilities;

·
Modine’s ability to successfully execute its four-point plan;

·
Modine’s ability to further cut costs to increase its gross margin and to maintain and grow its business, including its ability to cost effectively produce products in low cost countries;

·
Modine’s impairment of assets resulting from business downturns;

·
Modine’s ability to realize future tax benefits;

·
Customers’ actual production demand for new products and technologies, including market acceptance of a particular vehicle model or engine;

·
Modine’s ability to maintain customer relationships while rationalizing its business;

·
Modine’s ability to maintain current programs and compete effectively for new business, including its ability to offset or otherwise address increasing pricing pressures from its competitors and price reduction pressures from its customers;

·
Modine’s ability to obtain profitable business at its new facilities in China, Hungary, Mexico and India and to produce quality products at these facilities;

·
Unanticipated problems with suppliers meeting Modine’s time and price demands;

·
The impact of environmental laws and regulations on Modine’s business and the business of Modine’s customers, including Modine’s ability to take advantage of opportunities to supply alternative new technologies to meet environmental emissions standards;

·
Changes in the anticipated sales mix to products with lower margins;

·
Modine’s association with a particular industry, such as the automobile industry, that could have an adverse effect on Modine’s stock price;

·
The nature of the vehicular industry, including the failure of build rates to return to pre-recessionary levels and the dependence of these markets on the health of the economy;

·
Unanticipated product or manufacturing difficulties, including unanticipated warranty claims;

·
Unanticipated delays or modifications initiated by major customers with respect to product applications or requirements;

·
Costs and other effects of unanticipated litigation or claims, and the increasing pressures associated with rising healthcare and insurance costs; and

·
Other risks and uncertainties identified by the Company in public filings with the U.S. Securities and Exchange Commission.


Modine does not assume any obligation to update any forward-looking statements.
 
ITEM 7A.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.
 
In the normal course of business, Modine is subject to market exposure from changes in foreign exchange rates, interest rates, credit risk, economic risk and commodity price risk.
 
Foreign Currency Risk
 
Modine is subject to the risk of changes in foreign currency exchange rates due to its operations in foreign countries. Modine has manufacturing facilities in Brazil, China, Mexico, South Africa, India and throughout Europe.  It also has an equity investment in a Japanese company.  Modine sells and distributes its products throughout the world.  As a result, the Company's financial results could be significantly affected by factors such as changes in foreign currency exchange rates or weak economic conditions in the foreign markets in which the Company manufactures, distributes and sells its products.  The Company attempts to mitigate foreign current risks on transactions with customers and suppliers in foreign countries by entering into contracts that are denominated in the functional currency of the Modine entity engaging in the contract.  The Company's operating results are principally exposed to changes in exchange rates between the U.S. dollar and the European currencies, primarily the euro, and changes between the U.S. dollar and the Brazilian real.  Changes in foreign currency exchange rates for the Company's foreign subsidiaries reporting in local currencies are generally reported as a component of shareholders' equity.  Weakening of the U.S. dollar to other foreign currencies during fiscal 2010, especially the euro and real, has led to improvement of the Company’s foreign results.  This improvement is evident in the Company’s favorable currency translation adjustments of $22.9 million recorded in fiscal 2010.  In fiscal 2009, the Company experienced a general strengthening of the U.S. dollar to these foreign currencies, which resulted in an unfavorable currency translation adjustment of $91.4 million.  As of March 31, 2010 and 2009, the Company's foreign subsidiaries had net current assets (defined as current assets less current liabilities) subject to foreign currency translation risk of $88.5 million and $71.8 million, respectively.  The potential decrease in the net current assets from a hypothetical 10 percent adverse change in quoted foreign currency exchange rates would be approximately $8.9 million.  This sensitivity analysis presented assumes a parallel shift in foreign currency exchange rates.  Exchange rates rarely move in the same direction relative to the U.S. dollar.  This assumption may overstate the impact of changing exchange rates on individual assets and liabilities denominated in a foreign currency.
 
During the second half of fiscal 2010 and into the first two months of fiscal 2011, the Company experienced a strengthening of the U.S. dollar to the euro as the euro declined with credit concerns relating to certain members of the European Economic Union, particularly Greece.  The decline of the euro has contributed to recent unfavorable currency translation adjustments as the results of the Original Equipment – Europe segment are translated to the U.S. dollar.  If this segment records a consistent level of income from operations in fiscal 2011 as it did in fiscal 2010, a hypothetical 10 percent decline in the euro relative to the U.S. dollar would reduce the Company’s consolidated earnings in a range of $1 million to $2 million.
 
The Company has, from time to time, certain foreign-denominated, long-term debt obligations and long-term inter-company loans that are sensitive to foreign currency exchange rates.  As of March 31, 2010 there were no third-party foreign-denominated, long-term debt obligations.  The Company has inter-company loans outstanding at March 31, 2010 as follows:
 
 
·
$6.0 million loan to its wholly owned subsidiary, Modine do Brasil Sistemas Termicos Ltda. (Modine Brazil), that matures on May 8, 2011;
 
 
·
$13.0 million loan to its wholly owned subsidiary, Modine Thermal Systems India, that matures on April 30, 2013;
 
 
·
$12.0 million between two loans to its wholly owned subsidiary, Modine Thermal Systems Co (Changzhou, China), with various maturity dates through June 2012;
 
 
·
$4.7 million loan to its wholly owned subsidiary, Modine U.K. Dollar Limited, that matures on November 30, 2011; and
 
 
·
$45.4 million between two loans to its wholly owned subsidiary, Modine Holding GmbH, with various maturity dates through January 31, 2020.
 
 
These inter-company loans are sensitive to movement in foreign exchange rates, and the Company did not have any derivative instruments that hedge this exposure at March 31, 2010.  In fiscal 2008, the Company entered into a zero cost collar to hedge the foreign exchange exposure on inter-company loans outstanding with Modine Brazil.  This collar was settled on March 31, 2008 for a loss of 3.9 million reais ($2.3 million U.S. equivalent).  In fiscal 2009, the Company entered into a purchase option contract to hedge the foreign exchange exposure on inter-company loans outstanding with Modine Brazil.  The Company settled this derivative instrument on February 11, 2009 for cash proceeds of $1.8 million.  These derivative instruments were not being treated as hedges, and accordingly, transaction gains or losses on the derivatives were being recorded in other (income) expense – net in the consolidated statement of operations and acted to offset any currency movement on the outstanding loan receivable.
 
Interest Rate Risk

Modine's interest rate risk policies are designed to reduce the potential volatility of earnings that could arise from changes in interest rates.  The Company generally utilizes a mixture of debt maturities together with both fixed-rate and floating-rate debt to manage its exposure to interest rate variations related to its borrowings.  The domestic revolving credit facility is based on a variable interest rate of London Interbank Offered Rate (“LIBOR”) plus 475 basis points.  The Company is subject to future fluctuations in LIBOR, which would affect the variable interest rate on the revolving credit facility and create variability in interest expense.  A 100 basis point increase in LIBOR would increase annual interest expense by $0.1 million based on the March 31, 2010 revolving credit facility balance.  The Company has, from time to time, entered into interest rate derivatives to manage variability in interest rates.  These interest rate derivatives have been treated as cash flow hedges of forecasted transactions and, accordingly, derivative gains or losses are reflected as a component of accumulated other comprehensive (loss) income and are amortized to interest expense over the respective lives of the borrowings.  During the years ended March 31, 2010 and 2009, $0.9 million and $0.3 million of expense, respectively, was recorded in the consolidated statement of operations related to the amortization of interest rate derivative losses.  The expense for the year ended March 31, 2010 includes $0.5 million of amortization in proportion with the mandatory prepayment of the senior notes on September 30, 2009.  At March 31, 2010, $0.6 million of net unrealized losses remain deferred in accumulated other comprehensive (loss) income.  The following table presents the future principal cash flows and weighted average interest rates by expected maturity dates for our long-term debt.  The fair value of the long-term debt is estimated by discounting the future cash flows at rates offered to the Company for similar debt instruments of comparable maturities.  The book value of the debt approximates fair value, with the exception of the $121.5 million fixed rate notes, which have a fair value of approximately $132.0 million at March 31, 2010.

As of March 31, 2010, long-term debt matures as follows:
 
Years ending March 31
     
   
Expected Maturity Date
 
(dollars in thousands)
 
2011
   
2012
   
2013
   
2014
   
2015
   
Thereafter
   
Total
 
                                           
Fixed rate (U.S. dollars)
    -     $ 9,375     $ 18,750     $ 23,438     $ 32,601     $ 37,288     $ 121,452  
Average interest rate
    -       -       -       -       -       10.38 %        
Variable rate (U.S. dollars)
    -     $ 7,500       -       -       -       -     $ 7,500  
Average interest rate
    -       4.99 %     -       -       -       -          

As further discussed under “Liquidity and Capital Resources” in Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations, under the terms of the Intercreditor Agreement the primary lenders may be required to pay approximately $42 million to the senior note holders in October 2011 if a rebalancing of the Company’s indebtedness to the primary lenders and the senior note holders is required.  If this rebalancing becomes necessary, it would accelerate the debt maturity from the fiscal 2015 and thereafter columns.

Credit Risk

Credit risk is the possibility of loss from a customer's failure to make payment according to contract terms.  The Company's principal credit risk consists of outstanding trade receivables.  Prior to granting credit, the Company evaluates each customer, taking into consideration the customer's financial condition, payment experience and credit information.  After credit is granted, the Company actively monitors the customer's financial condition and developing business news.  Approximately 47 percent of the trade receivables balance at March 31, 2010 was concentrated with the Company's top ten customers.  Modine's history of incurring credit losses from customers has not been material, and the Company does not expect that trend to change.  However, the current economic uncertainty, especially within the global automotive and commercial vehicle markets, makes it difficult to predict future financial conditions of significant customers within these markets.  Deterioration in the financial condition of a significant customer could have a material adverse effect on the Company’s results of operations and liquidity.


The adverse events in the global financial markets over the past two years have increased credit risks on investments to which Modine is exposed or where Modine has an interest.  The Company manages these credit risks through its focus on the following:

 
·
Cash and investments – Cash deposits and short-term investments are reviewed to ensure banks have credit ratings acceptable to the Company and that all short-term investments are maintained in secured or guaranteed instruments.  The Company’s holdings in cash and investments were considered stable and secure at March 31, 2010;
 
·
Pension assets – The Company has retained outside advisors to assist in the management of the assets in the Company’s defined benefit plans.  In making investment decisions, the Company has been guided by an established risk management protocol that focuses on protection of the plan assets against downside risk.  The Company monitors investments in its pension plans to ensure that these plans provide appropriate diversification, investment teams and portfolio managers are adhering to the Company’s investment policies and directives, and exposure to high risk securities and other similar assets is limited.  The Company believes it has appropriate investment policies and controls and proactive investment advisors; and
 
·
Insurance – The Company monitors its insurance providers to ensure that they have acceptable financial ratings, and no concerns have been identified through this review.

Economic Risk

Economic risk is the possibility of loss resulting from economic instability in certain areas of the world or significant downturns in markets that the Company supplies.  The Company sells a broad range of products that provide thermal solutions to a diverse group of customers operating primarily in the automotive, truck, heavy equipment and commercial heating and air conditioning markets.  The adverse events in the global financial markets over the past two years have created a significant downturn in the vehicular markets, in which the Company competes, and to a lesser extent in the commercial heating and air conditioning markets.  The current economic uncertainty makes it difficult to predict future conditions within these markets.  A sustained economic downturn in any of these markets could have a material adverse effect on the future results of operations or the Company’s liquidity and potentially result in the impairment of related assets.

The Company is responding to these market conditions through its continued implementation of its four-point plan as follows:

 
·
Manufacturing realignment – aligning the manufacturing footprint to maximize asset utilization and improve the Company’s cost competitive position;
 
·
Portfolio rationalization – identifying products or businesses that should be divested or exited as they do not meet required financial metrics;
 
·
SG&A expense reduction – reducing SG&A expenses and SG&A expenses as a percentage of sales through diligent cost containment actions; and
 
·
Capital allocation discipline – allocating capital spending to operating segments and business programs that will provide the highest return on investment.

With respect to international instability, the Company continues to monitor economic conditions in the U.S. and elsewhere.  During fiscal 2010 there was weakening of the U.S. dollar.  The euro and Brazilian real strengthened against the dollar by 2 percent and 30 percent, respectively.  The Chinese renminbi strengthened less than one percent against the U.S. dollar in fiscal 2010.  From March 31, 2010 through May 25, 2010, the U.S. dollar has strengthened by approximately 8.7 percent against the euro based on economic uncertainty within Europe.  This results in foreign currency translation losses as the Company translates the Original Equipment – Europe financial results into U.S. dollars.  As Modine expands its global presence, we also encounter risks imposed by potential trade restrictions, including tariffs, embargoes and the like.  We continue to pursue non-speculative opportunities to mitigate these economic risks.


The Company pursues new market opportunities after careful consideration of the potential associated risks and benefits. Successes in new markets are dependent upon the Company's ability to commercialize its investments.  Current examples of new and emerging markets for Modine include those related to exhaust gas recirculation and waste heat recovery.  Modine's investment in these areas is subject to the risks associated with business integration, technological success, customers' and market acceptance, and Modine's ability to meet the demands of its customers as these markets emerge.

Future recovery from the global recession or continued economic growth in China are expected to put production pressure on certain of the Company's suppliers of raw materials.  In particular, there are a limited number of suppliers of copper, steel and aluminum fin stock serving a more robust market.  The Company is exposed to the risk of supply of certain raw materials not being able to meet customer demand and of increased prices being charged by raw material suppliers.

In addition to the purchase of raw materials, the Company purchases parts from suppliers that use the Company's tooling to create the part.  In most instances, the Company does not have duplicate tooling for the manufacture of its purchased parts.  As a result, the Company is exposed to the risk of a supplier of such parts being unable to provide the quantity or quality of parts that the Company requires.  Even in situations where suppliers are manufacturing parts without the use of Company tooling, the Company faces the challenge of obtaining high-quality parts from suppliers.  The Company has implemented a supplier risk management program that utilizes industry sources to identify and mitigate high risk supplier situations.

In addition to the above risks on the supply side, the Company is also exposed to risks associated with demands by its customers for decreases in the price of the Company's products.  The Company attempts to offset these risks with firm agreements with its customers whenever possible but these agreements generally carry annual price down provisions as well.

The Company operates in diversified markets as a strategy for offsetting the risk associated with a downturn in any one or more of the markets it serves.  However, the risk associated with any market downturn, including the current global economic downturn, is still present.

Commodity Price Risk

The Company is dependent upon the supply of certain raw materials and supplies in the production process and has, from time to time, entered into firm purchase commitments for copper, aluminum, nickel, and natural gas.  The Company utilizes an aluminum hedging strategy from time to time by entering into fixed price contracts to help offset changing commodity prices.  The Company utilizes collars from time to time for certain forecasted copper purchases, and also enters into forward contracts from time to time for certain forecasted nickel purchases.  The Company does maintain agreements with certain customers to pass through certain material price fluctuations in order to mitigate the commodity price risk.  The majority of these agreements contain provisions in which the pass-through of the price fluctuations can lag behind the actual fluctuations by a quarter or longer.

Hedging and Foreign Currency Exchange Contracts

The Company uses derivative financial instruments in a limited way as a tool to manage certain financial risks.  Their use is restricted primarily to hedging assets and obligations already held by Modine, and they are used to protect cash flows rather than generate income or engage in speculative activity.  Leveraged derivatives are prohibited by Company policy.

Commodity Derivatives: The Company enters into futures contracts from time to time related to certain of the Company’s forecasted purchases of aluminum and natural gas.  The Company’s strategy in entering into these contracts is to reduce its exposure to changing purchase prices for future purchase of these commodities.  These contracts have been designated as cash flow hedges by the Company.  Accordingly, unrealized gains and losses on these contracts are deferred as a component of accumulated other comprehensive (loss) income, and recognized as a component of earnings at the same time that the underlying purchases of aluminum and natural gas impact earnings.  During the years ended March 31, 2010 and 2009, $5.9 million and $4.5 million of expense, respectively, was recorded in the consolidated statement of operations related to the settlement of certain futures contracts.  At March 31, 2010, $2.0 million of unrealized losses remain deferred in accumulated other comprehensive (loss) income, and will be realized as a component of cost of sales over the next 63 months.  During fiscal 2010, the Company did not enter into any new futures contracts for commodities.


In addition, the Company has entered into futures contracts from time to time related to certain of the Company’s forecasted purchases of copper and nickel.  The Company’s strategy in entering into these contracts is to reduce its exposure to changing purchase prices for future purchases of these commodities.  The Company has not designated these contracts as hedges; therefore, gains and losses on these contracts are recorded directly in the consolidated statements of operations.  There were no futures contracts entered into for fiscal 2010.  During the year ended March 31, 2009 and 2008, $4.4 million of expense and $0.2 million of income, respectively, was recorded in cost of sales related to these futures contracts.

Foreign exchange contracts: Modine maintains a foreign exchange risk management strategy that uses derivative financial instruments in a limited way to mitigate foreign currency exchange risk.  Modine periodically enters into foreign currency exchange contracts to hedge specific foreign currency-denominated transactions.  Generally, these contracts have terms of 90 or fewer days.  The effect of this practice is to minimize the impact of foreign exchange rate movements on Modine’s earnings.  Modine’s foreign currency exchange contracts do not subject it to significant risk due to exchange rate movements because gains and losses on these contracts offset gains and losses on the assets and liabilities being hedged.

As of March 31, 2010, the Company had no outstanding forward foreign exchange contracts.  Non-U.S. dollar financing transactions through inter-company loans or local borrowings in the corresponding currency generally are effective as hedges of long-term investments.

The Company has a number of investments in wholly owned foreign subsidiaries and a non-consolidated foreign joint venture.  The net assets of these subsidiaries are exposed to currency exchange rate volatility.  From time to time, the Company uses non-derivative financial instruments to hedge, or offset, this exposure.

Interest rate derivatives: As further noted above under the section entitled “Interest Rate Risk,” the Company has, from time to time, entered into interest rate derivatives to manage the variability in interest rates.  These interest rate derivatives have been treated as cash flow hedges of forecasted transactions and, accordingly, derivative gains or losses are reflected as a component of accumulated other comprehensive (loss) income and are amortized to interest expense over the respective lives of the borrowings.

Counterparty risks: The Company manages counterparty risks by ensuring that counterparties to derivative instruments have credit ratings acceptable to the Company.  At March 31, 2010, all counterparties had a sufficient long-term credit rating.


ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.


MODINE MANUFACTURING COMPANY
CONSOLIDATED STATEMENTS OF OPERATIONS
For the years ended March 31, 2010, 2009 and 2008
(In thousands, except per share amounts)

   
2010
   
2009
   
2008
 
Net sales
  $ 1,163,234     $ 1,408,714     $ 1,601,672  
Cost of sales
    993,025       1,221,680       1,358,872  
Gross profit
    170,209       187,034       242,800  
Selling, general and administrative expenses
    157,502       199,613       217,835  
Restructuring (income) charges
    (679 )     30,404       3,565  
Impairment of goodwill and long-lived assets
    6,548       36,139       35,343  
Earnings (loss) from operations
    6,838       (79,122 )     (13,943 )
Interest expense
    22,888       13,775       11,070  
Other (income) expense – net
    (5,584 )     10,056       (8,394 )
Loss from continuing operations before income taxes
    (10,466 )     (102,953 )     (16,619 )
Provision for income taxes
    9,832       644       37,808  
Loss from continuing operations
    (20,298 )     (103,597 )     (54,427 )
Loss from discontinued operations (net of income taxes)
    (8,370 )     (7,481 )     (14,206 )
(Loss) gain on sale of discontinued operations (net of income taxes)
    (611 )     2,466       -  
Net loss
  $ (29,279 )   $ (108,612 )   $ (68,633 )
                         
Loss from continuing operations per common share:
                       
Basic
  $ (0.52 )   $ (3.23 )   $ (1.70 )
Diluted
  $ (0.52 )   $ (3.23 )   $ (1.70 )
                         
Net loss per common share:
                       
Basic
  $ (0.75 )   $ (3.39 )   $ (2.15 )
Diluted
  $ (0.75 )   $ (3.39 )   $ (2.15 )

The notes to consolidated financial statements are an integral part of these statements.


MODINE MANUFACTURING COMPANY
CONSOLIDATED BALANCE SHEETS
March 31, 2010 and 2009
(In thousands, except per share amounts)

   
2010
   
2009
 
ASSETS
           
Current assets:
           
Cash and cash equivalents
  $ 43,657     $ 43,536  
Short-term investments
    1,239       1,189  
Trade receivables, less allowance for doubtful accounts of $2,420 and $2,831
    167,745       122,266  
Inventories
    99,559       88,077  
Assets held for sale
    -       29,173  
Deferred income taxes and other current assets
    43,242       41,610  
Total current assets
    355,442       325,851  
Noncurrent assets:
               
Property, plant and equipment – net
    418,616       426,565  
Investment in non-consolidated affiliates
    3,079       11,268  
Goodwill
    29,552       25,639  
Intangible assets – net
    6,888       7,041  
Assets held for sale
    9,870       34,328  
Other noncurrent assets
    16,805       21,440  
Total noncurrent assets
    484,810       526,281  
Total assets
  $ 840,252     $ 852,132  
                 
LIABILITIES AND SHAREHOLDERS' EQUITY
               
Current liabilities:
               
Short-term debt
  $ 3,011     $ 5,036  
Long-term debt – current portion
    234       196  
Accounts payable
    142,209       94,506  
Accrued compensation and employee benefits
    66,268       67,328  
Income taxes
    7,527       4,838  
Liabilities of business held for sale
    -       28,018  
Accrued expenses and other current liabilities
    52,151       51,111  
Total current liabilities
    271,400       251,033  
Noncurrent liabilities:
               
Long-term debt
    135,952       243,982  
Deferred income taxes
    10,830       9,979  
Pensions
    74,270       67,367  
Postretirement benefits
    8,007       9,558  
Liabilities of business held for sale
    -       12,181  
Other noncurrent liabilities
    15,707       14,195  
Total noncurrent liabilities
    244,766       357,262  
Total liabilities
    516,166       608,295  
Commitments and contingencies (See Note 26)
               
Shareholders' equity:
               
Preferred stock, $0.025 par value, authorized 16,000 shares, issued - none
    -       -  
Common stock, $0.625 par value, authorized 80,000 shares, issued 46,815 and 32,790 shares
    29,260       20,494  
Additional paid-in capital
    159,854       72,800  
Retained earnings
    198,421       227,687  
Accumulated other comprehensive loss
    (49,183 )     (62,894 )
Treasury stock at cost: 554 and 549 shares
    (13,922 )     (13,897 )
Deferred compensation trust
    (344 )     (353 )
Total shareholders' equity
    324,086       243,837  
Total liabilities and shareholders' equity
  $ 840,252     $ 852,132  

The notes to consolidated financial statements are an integral part of these statements.


MODINE MANUFACTURING COMPANY
CONSOLIDATED STATEMENTS OF CASH FLOWS
For the years ended March 31, 2010, 2009 and 2008
(In thousands)

   
2010
   
2009
   
2008
 
Cash flows from operating activities:
                 
Net loss
  $ (29,279 )   $ (108,612 )   $ (68,633 )
Adjustments to reconcile net loss with net cash provided by operating activities:
                       
Depreciation and amortization
    65,766       73,334       81,786  
Loss (gain) on sale of businesses
    611       (2,466 )     -  
Pension and postretirement expense
    3,170       3,094       4,372  
Gain from disposition of property, plant and equipment
    (223 )     (3,904 )     (3,297 )
Loss from impairment of goodwill and long-lived assets
    14,194       49,766       47,420  
Deferred income taxes
    3,394       (12,831 )     20,589  
Provision for doubtful accounts
    202       1,713       940  
Undistributed losses (earnings) of affiliates, net of dividends received
    105       (249 )     (1,831 )
Stock-based compensation expense
    2,725       3,458       8,129  
Other – net
    2,427       11,633       (4,880 )
Changes in operating assets and liabilities, excluding acquisitions and dispositions:
                       
Trade receivables
    (52,126 )     117,480       (21,676 )
Inventories
    (6,707 )     11,771       (5,482 )
Other current assets
    (1,287 )     9,206       (1,895 )
Accounts payable
    62,363       (52,271 )     1,205  
Accrued compensation and employee benefits
    (17,887 )     362       2,464  
Income taxes
    9,543       (5,269 )     7,760  
Accrued expenses and other current liabilities
    2,104       (1,001 )     20,334  
Other – net
    2,809       (1,698 )     (5,632 )
Net cash provided by operating activities
    61,904       93,516       81,673  
                         
Cash flows from investing activities:
                       
Expenditures for property, plant and equipment
    (60,297 )     (103,261 )     (89,440 )
Change in restricted cash
    4,862       (10,828 )     -  
Proceeds from dispositions of assets
    8,687       7,101       10,020  
Proceeds from the sale of discontinued operations
    10,515       10,202       -  
Settlement of derivative contracts
    (6,629 )     (233 )     (1,974 )
Other – net
    903       3,394       85  
Net cash used for investing activities
    (41,959 )     (93,625 )     (81,309 )
                         
Cash flows from financing activities:
                       
Short-term debt, net
    (2,999 )     5,845       (1,205 )
Borrowings of long-term debt
    77,122       70,611       145,197  
Repayments of long-term debt
    (186,488 )     (50,293 )     (96,852 )
Financing fees paid
    (802 )     (3,876 )     (331 )
Book overdrafts
    (1,640 )     (393 )     (8,687 )
Issuance of common stock
    92,858       -       -  
Proceeds from exercise of stock options
    250       18       701  
Repurchase of common stock, treasury and retirement
    (25 )     (594 )     (7,710 )
Cash dividends paid
    -       (9,679 )     (22,633 )
Excess tax benefits from stock-based compensation
    -       -       (124 )
Other – net
    -       -       11  
Net cash (used for) provided by financing activities
    (21,724 )     11,639       8,367  
                         
Effect of exchange rate changes on cash
    1,900       (6,589 )     3,657  
Net increase in cash and cash equivalents
    121       4,941       12,388  
Cash and cash equivalents at beginning of year
    43,536       38,595       26,207  
Cash and cash equivalents at end of year
  $ 43,657     $ 43,536     $ 38,595  
                         
Cash paid during the year for:
                       
Interest, net of amounts capitalized
  $ 17,422     $ 14,690     $ 13,782  
Income taxes
  $ 7,082     $ 29,217     $ 27,854  

The notes to consolidated financial statements are an integral part of these statements.


MODINE MANUFACTURING COMPANY
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY AND COMPREHENSIVE INCOME (LOSS)
For the years ended March 31, 2010, 2009 and 2008
(In thousands, except per share amounts)

   
Common stock
   
Additional paid-in capital
   
Retained earnings
   
Accumulated other comprehensive (loss) income
   
Treasury stock
   
Deferred compensation trust
   
Total
 
Balance, March 31, 2007
  $ 20,545     $ 61,240     $ 445,831     $ (11,147 )   $ (12,468 )   $ (589 )   $ 503,412  
Comprehensive income (loss):
                                                       
Net loss
    -       -       (68,633 )     -       -       -       (68,633 )
Foreign-currency translation
    -       -       -       54,474       -       -       54,474  
Net investment hedge adjustment
    -       -       -       5,626       -       -       5,626  
Cash flow hedges (net of taxes of $565)
    -       -       -       1,194       -       -       1,194  
Changes in benefit plans:
                                                       
Net actuarial gains (net of taxes of $9,190)
                            11,474                       11,474  
Net prior service costs (net of taxes of $886)
                            (1,379 )                     (1,379 )
Transition obligations (net of taxes of $8)
    -       -       -       (12 )     -       -       (12 )
Total comprehensive income
                                                    2,744  
                                                         
Effects of changing benefit plan measurement dates
    -       -       (839 )     828       -       -       (11 )
Adoption of accounting for unrecognized tax positions
    -       -       (1,579 )     -       -       -       (1,579 )
Cash dividends, $0.70 per share
    -       -       (22,633 )     -       -       -       (22,633 )
Stock repurchase program
    (156 )     (538 )     (6,181 )     -       -       -       (6,875 )
Purchase of treasury stock
    -       -       -       -       (835 )     -       (835 )
Stock options and awards including related tax benefits
    103       3,966       -       -       -       -       4,069  
Amortization of deferred compensation under restricted stock plans
    -       4,678       -       -       -       -       4,678  
Investment in deferred compensation trust
    -       -       -       -       -       148       148  
Balance, March 31, 2008
    20,492       69,346       345,966       61,058       (13,303 )     (441 )     483,118  
Comprehensive income (loss):
                                                       
Net loss
    -       -       (108,612 )     -       -       -       (108,612 )
Foreign-currency translation
    -       -       -       (91,368 )     -       -       (91,368 )
Cash flow hedges (net of taxes of $0)
    -       -       -       (11,137 )     -       -       (11,137 )
Changes in benefit plans:
                                                       
Net actuarial loss (net of taxes of $66)
    -       -       -       (34,608 )     -       -       (34,608 )
Net prior service costs (net of taxes of $0)
    -       -       -       13,161       -       -       13,161  
Total comprehensive loss
                                                    (232,564 )
                                                         
Cash dividends, $0.30 per share
    -       -       (9,679 )     -       -       -       (9,679 )
Purchase of treasury stock
    -       -       -       -       (594 )     -       (594 )
Stock options and awards including related tax benefits
    12       776       -       -       -       -       788  
Forfeiture of stock awards
    (10 )     (62 )     12       -       -       -       (60 )
Amortization of deferred compensation under restricted stock plans
    -       2,740       -       -       -       -       2,740  
Investment in deferred compensation trust
    -       -       -       -       -       88       88  
Balance, March 31, 2009
    20,494       72,800       227,687       (62,894 )     (13,897 )     (353 )     243,837  
Comprehensive income (loss):
                                                       
Net loss
    -       -       (29,279 )     -       -       -       (29,279 )
Foreign-currency translation
    -       -       -       22,891       -       -       22,891  
Cash flow hedges (net of taxes of $0)
    -       -       -       8,886       -       -       8,886  
Changes in benefit plans:
                                                       
Net actuarial loss (net of taxes of $0)
    -       -       -       (15,968 )     -       -       (15,968 )
Net prior service costs (net of taxes of $0)
    -       -       -       (2,098 )     -       -       (2,098 )
Total comprehensive loss
                                                    (15,568 )
                                                         
Issuance of common stock
    8,625       84,233                                       92,858  
Purchase of treasury stock
    -       -       -       -       (25 )     -       (25 )
Stock options and awards including related tax benefits
    161       1,670       -       -       -       -       1,831  
Forfeiture of stock awards
    (20 )     (339 )     13       -       -       -       (346 )
Amortization of deferred compensation under restricted stock plans
    -       1,490       -       -       -       -       1,490  
Investment in deferred compensation trust
    -       -       -       -       -       9       9  
Balance, March 31, 2010
  $ 29,260     $ 159,854     $ 198,421     $ (49,183 )   $ (13,922 )   $ (344 )   $ 324,086  

The notes to consolidated financial statements are an integral part of these statements.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Note 1:  Overview

Nature of operations:  Modine Manufacturing Company (Modine or the Company) specializes in thermal management systems and components, bringing heating and cooling technology and solutions to diversified global markets.  The Company is a leading global developer, manufacturer and marketer of heat exchangers and systems for use in on-highway and off-highway original equipment manufacturer (OEM) vehicular applications, and to a wide array of building, industrial, refrigeration and fuel cell markets.  Product lines include radiators and radiator cores, vehicular air conditioning, oil coolers, charge air coolers, heat-transfer packages and modules, building heating, ventilating and air conditioning (HVAC) equipment and exhaust gas recirculation (EGR) coolers.

Basis of presentation:  The consolidated financial statements are prepared in conformity with generally accepted accounting principles (GAAP) in the United States.  These principles require management to make certain estimates and assumptions in determining Modine’s assets, liabilities, revenue, expenses and related disclosures.  Actual amounts could differ from those estimates.

Loss from continuing operations:  For the year ended March 31, 2010, the Company reported a loss from continuing operations of $20,298, which represents a significant improvement from the loss from continuing operations of $103,597 reported for the year ended March 31, 2009.

During fiscal 2010, the Company reported net sales of $1,163,234, which represents a 17 percent decrease from net sales of $1,408,714 reported in fiscal 2009.  During the first half of fiscal 2009, the Company recorded relatively strong sales.  However, the global economic recession dramatically reduced the Company’s sales in the third and fourth quarters of fiscal 2009.  In conjunction with this decline in volumes, combined with $36,139 of asset impairment charges and $30,404 of restructuring charges recorded during fiscal 2009, the Company reported a loss from continuing operations of $103,597 in fiscal 2009.

In the first quarter of fiscal 2010, the Company’s net sales remained depressed due to the continued impact of the global economic recession.  Since that point, net sales have sequentially improved over the second, third and fourth quarters of fiscal 2010, indicating a slow, but steady improvement in sales volumes since the bottom of the recession in the fourth quarter of fiscal 2009.  However, sales volumes continue to remain significantly lower than pre-recessionary volumes experienced in the first half of fiscal 2009, contributing to the 17 percent decline in net sales year-over-year.

In response to the declining business and market conditions in fiscal 2009 and into fiscal 2010, the Company continued to execute on the strategies of its four-point plan, which includes manufacturing realignment, portfolio rationalization, selling, general and administrative (“SG&A”) expense reduction and capital allocation discipline.  The Company initiated the following actions through the four-point plan designed to attain a more competitive cost base, improve the Company’s longer term competitiveness and more effectively capitalize on growth opportunities in its thermal management markets:

 
·
The closure of one manufacturing facility in North America and one in Europe during fiscal 2010, and actions taken toward the planned closure in fiscal 2011of two previously announced facilities in North America;
 
·
The announced closure of the Harrodsburg, Kentucky facility within the Original Equipment – North America segment, which is planned to be completed in fiscal 2011;
 
·
A reduction of direct and indirect costs in the Company’s manufacturing facilities in North America and Europe;
 
·
Reduction in SG&A expenses through the realignment of regional and corporate headquarters, including a global reduction in workforce, evidenced by a 21 percent decline in SG&A expenses from fiscal 2009 to fiscal 2010; and
 
·
Tightened controls on capital spending by which the Company allocates capital spending to the segments and programs that will provide the highest return on the Company’s investment.  Capital spending was reduced 42 percent to $60,297 during fiscal 2010, which is significantly below the Company’s recent historical rates.

During fiscal 2010, the Company’s loss from continuing operations improved $83,299 from fiscal 2009 based on the execution of these actions under the four-point plan, the positive impact of the sequential improvement in the Company’s quarterly net sales during fiscal 2010, and the absence of significant impairment and restructuring charges similar to those recorded in fiscal 2009.

Liquidity:  On September 30, 2009, the Company completed a public offering of 13,800 shares of its common stock at a price of $7.15 per share.  The proceeds of the common stock offering were $92,858 after deducting underwriting discounts, commissions, legal, accounting and printing fees.  On December 23, 2009, the Company sold 100 percent of the shares of its South Korea-based heating, ventilating and air conditioning business for net cash proceeds of $10,515.  The proceeds from these transactions were used to reduce outstanding indebtedness and contributed to a $110,017 reduction of indebtedness since March 31, 2009.  At March 31, 2010, the Company has available borrowing capacity of $167,116.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The Company’s debt agreements require it to maintain compliance with various covenants.  At March 31, 2010, the Company was in compliance with the debt covenants.  The Company believes that its internally generated operating cash flows, existing cash balances, and access to available external borrowings will be sufficient to satisfy future operating costs, capital expenditures and restructuring costs incurred under the four-point plan.

Note 2:  Significant accounting policies

Consolidation principles:  The consolidated financial statements include the accounts of Modine Manufacturing Company and its majority-owned or Modine-controlled subsidiaries.  Material inter-company transactions and balances are eliminated in consolidation.

Investments in non-consolidated affiliated companies in which ownership is 20 percent or more are accounted for by the equity method.  The investments are stated at cost plus or minus a proportionate share of the undistributed net income (loss).  Modine’s share of the affiliates’ net income (loss) is reflected in other income – net.  See Note 12 for further discussion.

Discontinued operations and assets held for sale:  The Company considers businesses to be held for sale when management approves and commits to a formal plan to actively market the business for sale at a sale price reasonable in relation to its fair value, the business is available for immediate sale in its present condition, the sale of the business is probable and expected to be completed within one year and it is unlikely that significant changes will be made to the plan.  Upon designation as held for sale, the carrying value of the assets of the business are recorded at the lower of their carrying value or their estimated fair value, less costs to sell.  The Company ceases to record depreciation expense at the time of designation as held for sale.  Results of operations of a business classified as held for sale are reported as discontinued operations when (a) the operations and cash flows of the business will be eliminated from ongoing operations as a result of the sale and (b) the Company will not have any significant continuing involvement in the operations of the business after the sale.  The Company classifies the South Korean and the Electronics Cooling business as discontinued operations.  Assets held for sale totaling $9,870 at March 31, 2010 represent certain facilities which the Company has closed or intends to close and the Company is currently marketing for sale.

Revenue recognition:  Sales revenue, including agreed upon commodity price increases, is recognized at the time of product shipment to customers when title and risk of loss pass to customers, selling prices are fixed or determinable and collectibility from the customer is reasonably assured.  Appropriate provisions are made for uncollectible accounts based on historical data or specific customer economic data, and for estimated commodity price increases which may ultimately not be collected.

Sales discounts:  Sales discounts, which are allowed for prompt payment of invoices by customers, are recorded as a reduction to net sales.

Tooling costs:  Modine accounts for pre-production tooling costs as a component of property, plant and equipment – net when the Company owns title to the tooling, and amortizes the capitalized cost to cost of sales over the life of the related program.  At March 31, 2010 and 2009, the Company-owned tooling totaled $21,379 and $16,971, respectively.  In certain instances, the Company makes an upfront payment for customer-owned tooling costs, and subsequently receives a reimbursement from the customer for the upfront payment.  The Company accounts for unbilled customer-owned tooling costs as a receivable when the customer has guaranteed reimbursement to the Company.  No significant arrangements exist where customer-owned tooling costs were not accompanied by guaranteed reimbursement.  At March 31, 2010 and 2009, the cost reimbursement receivable related to customer-owned tooling totaled $12,033 and $8,958, respectively.

Warranty:  Modine provides product warranties for specific product lines and accrues for estimated future warranty costs in the period in which the sale is recorded.  Warranty expense is generally provided based upon historical and current claim data.  Accrual balances are monitored and adjusted when it becomes probable that expected claims will differ from existing estimates.  Accruals are recorded as current liabilities under the caption accrued expenses and other current liabilities.  See Note 21 for further discussion.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Shipping and handling costs:  Shipping costs for inbound freight are treated as product cost.  Shipping and handling costs incurred upon the shipment of products to our OEM customers are recorded as a component of cost of sales, and related amounts billed to these customers are recorded as a component of net sales.  Shipping and handling costs incurred upon the shipment of products to our HVAC customers are recorded as a component of SG&A expenses.  For the years ended March 31, 2010, 2009 and 2008, these shipping and handling costs recorded as a component of SG&A expenses were $2,987, $3,427 and $3,563, respectively.

Revenue recognition under licensing arrangements (royalty payments):  Revenues under various licensing agreements are recognized when earned except in those cases where collection is uncertain, or the amount cannot reasonably be estimated until formal accounting reports are received from the licensee as provided for under the provisions of the licensing agreement.  For the years ended March 31, 2010, 2009 and 2008, licensing revenue totaled $5,562, $13,891 and $4,785, respectively, and are recorded in the statement of operations under the caption net sales.

Translation of foreign currencies:  Assets and liabilities of foreign subsidiaries and equity investments are translated into U.S. dollars at the period-end exchange rates, and income and expense items are translated at the monthly average exchange rate for the period in which the items occur.  Resulting translation adjustments are reported as a component of accumulated other comprehensive (loss) income included in shareholders' equity.  Foreign currency transaction gains or losses are included in the statement of operations under the caption other income – net.

Derivative instruments:  The Company enters into derivative financial instruments from time to time to manage certain financial risks.  Futures contracts are entered into by the Company to reduce exposure to changing future purchase prices for aluminum and natural gas.  Foreign exchange options and forward contracts on foreign currencies are entered into by Modine as hedges against the impact of currency fluctuations on certain sales and purchase transactions.  Interest rate locks and swaps are entered into to lock in fixed interest rates for variable-rate borrowings.  These instruments are used to protect cash flows and are not speculative.  The Company generally designates its derivative instruments as cash flow hedges.  Accordingly, unrealized gains and losses on these contracts are deferred as a component of accumulated other comprehensive (loss) income and recognized as a component of earnings at the same time that the underlying transactions impact earnings.  Starting in fiscal 2008, the Company entered into future contracts related to certain of its forecasted purchases of copper and nickel.  The Company did not designate these contracts as hedges; therefore gains and losses were recorded as a component of earnings when incurred.  See Note 19 for further discussion.

Income taxes:  Deferred tax assets and liabilities are determined based on the difference between the amounts reported in the financial statements and tax bases of assets and liabilities, using enacted tax rates in effect in the years in which the differences are expected to reverse.  A valuation allowance is established if it is more likely than not that some portion or all of a deferred tax asset will not be realized.  See Note 7 for further discussion.

Earnings per share:  Basic earnings per share is calculated based on the weighted average number of common shares outstanding during the year, while diluted earnings per share is calculated based on the dilutive effect of common shares that could be issued.  The calculation of diluted earnings per share excludes all potentially dilutive shares in which their inclusion would have the effect of decreasing the loss per share amount.  See Note 8 for further discussion.

Cash equivalents: Modine considers all highly liquid investments with original maturities of three months or less to be cash equivalents.

Deferred compensation trust:  The Company maintains a deferred compensation trust to fund future obligations under its non-qualified deferred compensation plan.  The trust’s investments in third-party debt and equity securities are reflected as short-term investments in the consolidated balance sheet and are treated as trading securities with changes in fair value reflected as a component of earnings.  The trust’s investment in Modine stock is reflected as a reduction of shareholders’ equity in the consolidated balance sheet at its original stock cost.  A deferred compensation obligation is recorded within the liabilities at the fair value of the investments held by the deferred compensation trust.  Any differences between the recorded value of the short-term investments and Modine stock and the fair value of the deferred compensation obligation are reflected as adjustments to earnings.

Trade receivables and allowance for doubtful accounts:  Trade receivables are recorded at the invoiced amount and do not bear interest if paid according to the original terms.  The allowance for doubtful accounts is Modine’s best estimate of the uncollectible amount contained in the existing trade receivables balance.  The allowance is based on historical write-off experience and specific customer economic data.  The allowance for doubtful accounts is reviewed periodically and adjusted as necessary.  Utilizing age- and size-based criteria, certain individual accounts are reviewed for collectibility, while all other accounts are reviewed on a pooled basis.  Receivables are charged off against the allowance when it is probable and to the extent that funds will not be collected.  On September 25, 2008, the Company and its German subsidiary entered into Accounts Receivable Purchase Agreements whereby one specific customer’s accounts receivable may be sold without recourse to a third-party financial institution on a revolving basis.  During the years ended March 31, 2010 and 2009, the Company sold $12,289 and $15,252 of accounts receivable, to accelerate cash receipts.  Sales of accounts receivable are reflected as a reduction of accounts receivable on the consolidated balance sheets and the proceeds are included in the cash flows from operating activities in the consolidated statements of cash flows.  During the years ended March 31, 2010 and 2009, a loss on the sale of accounts receivables of $91 and $140 was recorded in the consolidated statements of operations.  This loss represented implicit interest on the transactions.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Inventories: Inventories are valued at the lower of cost on a first-in, first-out basis, or market value.

Property, plant and equipment:  Property, plant and equipment are stated at cost.  For financial reporting purposes, depreciation is principally computed using the straight-line method over the expected useful life of the asset.  Maintenance and repair costs are charged to operations as incurred.  Costs of improvements are capitalized.  Upon the sale or other disposition of an asset, the cost and related accumulated depreciation are removed from the accounts and the gain or loss is included in the statement of operations.

Goodwill and intangible assets:  Purchased goodwill and other intangible assets with indefinite lives, primarily tradenames, are not amortized; rather they are tested for impairment annually unless conditions exist which would require a more frequent evaluation.  An assessment of the fair value of the Company’s reporting units for its goodwill valuation and its other intangible assets with indefinite lives is required and is based upon, among other things, the present value of the expected future cash flows.  An impairment loss is recognized when the book value of goodwill exceeds the fair value.  Goodwill impairment charges of $9,005 and $23,769 were recorded during fiscal 2009 and 2008, respectively.  See Note 15 for further discussion.

Impairment of long-lived assets:  Long-lived assets, including property, plant and equipment and intangible assets with finite lives are reviewed for impairment and written down to fair value when facts and circumstances indicate that the carrying value of long-lived assets may not be recoverable through estimated future undiscounted cash flows.  If impairment has occurred, a write-down to estimated fair value is made and the impairment loss is recognized as a charge against current operations.  Fair value is estimated using a variety of valuation techniques including discounted cash flows, market values and comparison values for similar assets.  Investments are reviewed for impairments and written down to fair value when facts and circumstances indicate that a decline in value is other than temporary.  Long-lived asset and equity investment impairment charges of $6,548 and $34,370 were recorded during fiscal 2010 and 2009, respectively.  See Note 11 and Note 12 for further discussion.

Restricted cash:  At March 31, 2010 and 2009, the Company had long-term restricted cash of $5,926 and $10,828, respectively, included in other noncurrent assets.  This amount primarily collateralizes unrealized losses on commodity derivatives with JPMorgan Chase Bank, N.A. as the counterparty.

Environmental expenditures:  Environmental expenditures related to current operations that qualify as property, plant and equipment or substantially increase the economic value or extend the useful life of an asset are capitalized.  All other expenditures are expensed as incurred.  Environmental expenditures that relate to an existing condition caused by past operations are expensed.  Liabilities are recorded on an undiscounted basis when environmental assessments and/or remediation efforts are probable and the costs can be reasonably estimated.

Self-insurance reserves:  The Company retains much of the financial risk for insuring property, general liability, worker’s compensation and employee group health claims.  Operations are charged with the cost of claims reported and an estimate of claims incurred but not recorded.  Self-insurance accruals include estimated settlements for known claims, as well as accruals of estimates, some of which are actuarially determined, of incurred but not reported claims.  All of  these self-insurance accruals are subject to various stop-loss limits.  The determination of insurance claims and the appropriateness of the related liability accruals are reviewed and updated at regular intervals.

Stock-based compensation:  The Company recognizes stock-based compensation using the fair-value-based method.  Accordingly, compensation cost for stock options, stock awards and restricted stock is calculated based on the fair value of the instrument at the time of grant, and is recognized as expense over the vesting period of the stock-based instrument.  The majority of this expense is reflected in corporate as administrative expense, and has not been allocated to various segments.  See Note 24 for further discussion.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Accounting standards changes and new pronouncements: In December 2007, the Financial Accounting Standards Board (FASB) issued updated guidance on business combinations which retained the underlying concepts that all business combinations are still required to be accounted for at fair value under the acquisition method of accounting, but changed the method of applying the acquisition method in a number of significant aspects.  For all business combinations, the entity that acquires the business will record 100 percent of all assets and liabilities of the acquired business, including goodwill, generally at their fair values.  Certain contingent assets and liabilities acquired will be recognized at their fair values on the acquisition date and changes in fair value of certain arrangements will be recognized in earnings until settled.  Acquisition-related transaction and restructuring costs will be expensed rather than treated as an acquisition cost and included in the amount recorded for assets acquired.  Additionally, this new guidance amended the goodwill disclosure requirements to require a roll-forward of the gross amount of goodwill and accumulated impairment losses.  This new guidance is effective for the Company on a prospective basis for all business combinations for which the acquisition date is on or after April 1, 2009, with the exception of the accounting for valuation allowances on deferred taxes and acquired tax contingencies.  This guidance also amends accounting for income taxes such that adjustments made to valuation allowances on deferred taxes and acquired tax contingencies associated with acquisitions that close prior to the effective date of the new guidance would also apply the provisions of that guidance.  Early adoption was not allowed.  The adoption of this standard did not have an impact on previous acquisitions.

In December 2007, the FASB issued new accounting guidance on consolidations which established new standards that will govern the accounting for and reporting of (1) non-controlling interests in partially-owned consolidated subsidiaries and (2) the loss of control of subsidiaries.  The Company’s consolidated subsidiaries are wholly owned and, as such, no non-controlling interests are currently reported in its consolidated financial statements.  Other current ownership interests are reported under the equity method of accounting under investments in affiliates.  This new guidance was effective for the Company on a prospective basis on April 1, 2009 except for the presentation and disclosure requirements, which will be applied retrospectively.  Early adoption was not allowed.   The adoption of this standard did not have an impact on the consolidated financial statements.

In June 2008, the FASB issued new accounting guidance on share-based payment transactions which required unvested share-based payment awards that contain non-forfeitable rights to dividends to be treated as participating securities and included in the computation of basic earnings per share.  This new guidance was effective for the Company during the first quarter of fiscal 2010, and required all prior-period earnings per share data to be adjusted retrospectively.  Early adoption was not allowed.  The adoption of this standard had an impact on earnings per share of $0.01 for the years ended March 31, 2009 and 2008.  See Note 8 for further discussion.

Note 3:  Research and development costs

Research and development costs charged to operations totaled $56,899 in fiscal 2010, $73,232 in fiscal 2009, and $85,795 in fiscal 2008.

Note 4:  Employee benefit plans

Defined Contribution Employee Benefit Plans:

401(k) plans: The Company maintains domestic 401(k) plans that allow employees to choose among various investment alternatives, including Modine stock.  The Company’s matching contribution is discretionary.  The Company matched 50 percent of the employees’ contribution up to 5 percent of employee contributions during fiscal 2010, fiscal 2009 and fiscal 2008.  Company contributions have an initial three-year vesting period.

Defined contribution plan: The Company maintains a domestic defined contribution plan that was established on January 1, 2004 and initially covered all eligible salaried employees hired after January 1, 2004.  Effective April 1, 2006, all salaried employees previously covered under the Modine Salaried Employee Pension Plan were eligible to participate in this plan.  Modine makes annual discretionary contributions based on a percentage of compensation, which is determined by management.  Employees can choose among various investment alternatives including Modine stock.

Deferred compensation plan: The Company maintains a non-qualified deferred compensation plan for eligible employees.  The plan allows qualified employees to choose among various investment alternatives including Modine stock.  The Company’s matching contributions are participant-directed, similar to the 401(k) plans.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Modine’s expense recorded for the defined contribution employee benefit plans during fiscal 2010, 2009 and 2008 was $4,662, $2,955, and $7,535, respectively.

In addition, various Modine foreign subsidiaries have in place government required defined contribution plans under which Modine contributes a percentage of employee earnings into accounts, consistent with local laws.

Statutory Termination Plans:

Certain of Modine’s foreign subsidiaries have statutory termination indemnity plans covering all of their eligible employees.  The benefits under these plans are based upon years of service and final average compensation levels or a monthly retirement benefit amount.  These programs are all substantially unfunded in accordance with local laws, but are often covered by national obligatory umbrella insurance programs that protect employees from losses in the event that an employer defaults on its obligations.

Defined Benefit Employee Benefit Plans:
 
Pension plans: Modine has several non-contributory defined benefit pension plans that cover most of its domestic employees hired on or before December 31, 2003.  The benefits provided are based primarily on years of service and average compensation for the salaried plans and some hourly plans.  Other hourly plans are based on a monthly retirement benefit amount.  Domestic salaried employees hired after December 31, 2003 are not covered under any defined benefit plan.  Certain of Modine’s foreign subsidiaries also have legacy defined benefit plans covering a small number of active employees.

During fiscal 2010 and fiscal 2009, the Company recorded settlement charges of $780 and $1,204 respectively, related to settlement payments made from the Modine Manufacturing Company Supplemental Executive Retirement Plan.

In February 2008, the Company announced the closure of its facilities in Logansport, Indiana, and Pemberville, Ohio.  The Company recorded pension curtailment charges of $485 and $1,378 during fiscal 2008 to reflect the impact of these upcoming closures on the Logansport Hourly-Paid Employees Retirement Plan and the Pemberville Hourly-Paid Employees Retirement Plan, respectively.

In September 2007, the Company announced that effective January 1, 2008, the Modine Manufacturing Company Pension Plan for Non-Union Hourly-Paid Factory and Salaried Employees (Salaried Employee Component) and the Modine Manufacturing Company Supplemental Executive Retirement Plan were modified so that no increases in annual earnings after December 31, 2007 would be included in calculating the average annual earnings portion under the pension plan formula.  The Company recorded a pension curtailment gain of $4,214 in fiscal 2008 to reflect this modification.

Postretirement plans: Modine and certain of its domestic subsidiaries provide selected healthcare and life-insurance benefits for retired employees.  Designated employees may become eligible for those benefits when they retire.  These plans are unfunded.  Modine periodically amends the plans, changing the contribution rate of retirees and the amounts and forms of coverage.  An annual limit on Modine’s liability was established for most plans between fiscal 1994 and fiscal 1996 after original recognition of the liability in fiscal 1993.  It caps future costs at 200 percent of Modine’s then-current cost.  These changes reduced the accrued obligation, and the reduction is being amortized as a component of the benefit cost.

Effective January 1, 2009, the Modine Manufacturing Company Group Insurance Plan – Retiree Medical Plan was modified to eliminate coverage for retired participants who are Medicare eligible.  This plan amendment resulted in a $14,251 reduction of the post-retirement benefit obligation, which has been reflected as a component of other comprehensive (loss) income and is being amortized to earnings over the future service life of active participants.

Measurement Date:  Modine uses March 31 as the measurement date for its pension and postretirement plans.  The Company was required to adopt the year-end measurement date for its domestic pension and postretirement plans in fiscal 2008 using the prospective method, which resulted in an increase in accumulated other comprehensive (loss) income of $828 and a reduction in retained earnings of $839.

The change in benefit obligations and plan assets as well as the funded status of Modine's pension and postretirement plans were as follows:


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

   
Pensions Plans
   
Postretirement Plans
 
Years ended March 31
 
2010
   
2009
   
2010
   
2009
 
                         
Change in benefit obligation:
                       
Benefit obligation at beginning of year
  $ 195,508     $ 226,160     $ 10,097     $ 29,434  
Service cost
    2,014       2,464       75       139  
Interest cost
    14,530       14,131       527       1,126  
Plan amendments
    97       79       -       (14,251 )
Actuarial loss (gain)
    45,673       (20,791 )     (822 )     (3,909 )
Benefits paid
    (17,151 )     (23,151 )     (1,333 )     (4,536 )
Settlement/curtailment adjustment
    324       316       -       -  
Contributions by plan participants
    -       -       241       1,741  
Medicare subsidy
    -       -       42       353  
Currency translation adjustment
    249       (3,700 )     -       -  
Benefit obligation at end of year
  $ 241,244     $ 195,508     $ 8,827     $ 10,097  
                                 
Change in plan assets:
                               
Fair value of plan assets at beginning of year
  $ 127,072     $ 190,832     $ -     $ -  
Actual return on plan assets
    41,472       (45,181 )     -       -  
Benefits paid
    (17,151 )     (23,151 )     (1,333 )     (4,536 )
Employer contributions
    3,775       4,572       1,050       2,442  
Contributions by plan participants
    -       -       241       1,741  
Medicare subsidy
    -       -       42       353  
Fair value of plan assets at end of year
  $ 155,168     $ 127,072     $ -     $ -  
Funded status at end of year
  $ (86,076 )   $ (68,436 )   $ (8,827 )   $ (10,097 )
                                 
Amounts recognized in the consolidated balance sheet consist of:
                               
Current liability
  $ (11,806 )   $ (1,069 )   $ (820 )   $ (539 )
Noncurrent liability
    (74,270 )     (67,367 )     (8,007 )     (9,558 )
    $ (86,076 )   $ (68,436 )   $ (8,827 )   $ (10,097 )
Amounts recognized in accumulated other comprehensive loss (income) consist of:
                               
Net actuarial loss
  $ 127,166     $ 110,633     $ 882     $ 1,671  
Prior service cost (credit)
    1,971       2,247       (10,258 )     (12,631 )
    $ 129,137     $ 112,880     $ (9,376 )   $ (10,960 )

The accumulated benefit obligation for all defined benefit pension plans was $239,169 and $193,511 as of March 31, 2010 and 2009, respectively.

Pension plans with accumulated benefit obligations in excess of plan assets consist of the following:

Years ended March 31
 
2010
   
2009
 
             
Projected benefit obligation
  $ 241,244     $ 195,508  
Accumulated benefit obligation
    239,169       193,511  
Fair value of the plan assets
    155,168       127,072  


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Costs for Modine’s pension and postretirement benefit plans include the following components:

   
Pension Plans
   
Postretirement Plans
 
Years ended March 31
 
2010
   
2009
   
2008
   
2010
   
2009
   
2008
 
                                     
Components of net periodic benefit costs:
                                   
Service cost
  $ 2,014     $ 2,464     $ 2,872     $ 75     $ 139     $ 276  
Interest cost
    14,530       14,132       14,301       527       1,126       1,806  
Expected return on plan assets
    (15,118 )     (17,016 )     (18,208 )     -       -       -  
Amortization of:
                                               
Unrecognized net loss (gain)
    2,543       1,914       2,648       (33 )     142       488  
Unrecognized prior service cost (credit)
    373       366       380       (2,374 )     (1,377 )     23  
Unrecognized net asset
    -       -       (20 )     -       -       -  
Adjustment for settlement/curtailment
    633       1,204       (2,351 )     -       -       -  
Net periodic benefit cost (income)
  $ 4,975     $ 3,064     $ (378 )   $ (1,805 )   $ 30     $ 2,593  
                                                 
Other changes in plan assets and benefit obligation recognized in other comprehensive income:
                                               
Net actuarial loss (gain)
  $ 19,644     $ 41,722     $ (14,963 )   $ (822 )   $ (3,909 )   $ (1,017 )
Prior service costs (credit)
    97       79       317       -       (14,251 )     -  
Reversal of amortization items:
                                               
Net actuarial (loss) gain
    (3,111 )     (3,129 )     (2,648 )     33       (142 )     (488 )
Prior service (costs) credit
    (373 )     (366 )     1,971       2,374       1,377       (23 )
Transition asset
    -       -       20       -       -       -  
Total recognized in other comprehensive loss (income)
  $ 16,257     $ 38,306     $ (15,303 )   $ 1,585     $ (16,925 )   $ (1,528 )
                                                 
Total recognized in net periodic benefit costs and other comprehensive income
  $ 21,232     $ 41,370     $ (15,681 )   $ (220 )   $ (16,895 )   $ 1,065  

The estimated net actuarial loss and prior service cost for the pension plans that will be amortized from accumulated other comprehensive (loss) income into net periodic benefit cost over the next fiscal year are $8,025 and $356, respectively.  The estimated net actuarial loss and prior service cost (credit) for the postretirement plans that will be amortized from accumulated other comprehensive (loss) income into net periodic benefit cost (credit) over the next fiscal year are $87 and $(2,371), respectively.

The weighted–average assumptions used to determine Modine’s benefit obligation under the plans are detailed as follows:

Years ended March 31
 
2010
   
2009
 
   
U.S. Plans
   
Foreign Plans
   
U.S. Plans
   
Foreign Plans
 
Pension plans:
                       
Discount rate
    5.93 %     5.00 %     7.73 %     6.10 %
Rate of compensation increase
    N/A       N/A       N/A       N/A  
Postretirement plans:
                               
Discount rate
    5.38 %     N/A       7.35 %     N/A  


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The weighted-average assumptions used to determine Modine's costs under the plans are detailed as follows:

Years ended March 31
 
2010
   
2009
   
2008
 
   
U.S. Plans
   
Foreign Plans
   
U.S. Plans
   
Foreign Plans
   
U.S. Plans
   
Foreign Plans
 
Pension plans:
                                   
Discount rate
    7.73 %     6.10 %     6.62 %     5.53 %     5.92 %     4.70 %
Expected return on plan assets
    7.90 %     N/A       7.90 %     N/A       8.25 %     N/A  
Rate of compensation increase
    N/A       N/A       N/A       N/A       N/A       N/A  
Postretirement plans:
                                               
Discount rate
    7.35 %     N/A       6.62 %     N/A       5.92 %     N/A  

The discount rate used to determine the present value of the Company’s future U.S. pension obligations as of the measurement date uses a methodology that equates the plans’ projected benefit obligations to a present value, calculated using a yield curve.  The yield curve was constructed from a portfolio of high quality, non-callable corporate debt securities with maturities ranging from six months to thirty years.  The discount rate was determined by matching the pension plans’ expected cash flows (on a PBO basis) with spot rates developed from the yield curve.  The discount rate used to determine the present value of the Company’s future foreign pension obligations as of the measurement date is based upon the yield for zero coupon bonds plus a yield margin measured as the difference between corporate bonds (AA or higher) in Europe and government bonds.

Plan assets in the U.S. defined benefit plans comprise 100 percent of the Company’s world-wide benefit plan assets.  Modine's U.S. pension plan weighted-average asset allocations at the measurement dates of March 31, 2010 and 2009 by category, and the target allocation for the years ended March 31, 2010 and 2009 are summarized below:

   
Target allocation
   
Plan assets
 
   
2010
   
2009
   
2010
   
2009
 
                         
Equity securities
    55 %     65 %     59 %     45 %
Debt securities
    38 %     30 %     35 %     50 %
Alternative assets
    5 %     0 %     5 %     0 %
Cash
    2 %     5 %     1 %     5 %
      100 %     100 %     100 %     100 %

Due to market conditions and other factors including timing of benefit payments, actual asset allocation may vary from the target allocation outlined above.  The assets are periodically rebalanced to the target allocations.  There were no shares of Modine common stock included in the plan assets at the end of fiscal 2010 and 2009.

Modine employs a total return investment approach, whereby a mix of equities and fixed income investments are used to maximize the long-term return of plan assets while avoiding excessive risk.  Pension plan guidelines have been established based upon an evaluation of market conditions, tolerance for risk and cash requirements for benefit payments.  Investment risk is measured and monitored on an ongoing basis through quarterly investment portfolio reviews, annual liability measurements and periodic asset/liability studies.

The expected rate of return on U.S. plan assets is based upon historical return experience and forward-looking return expectations for major asset class categories.  For fiscal 2010, Modine assumed a rate of return of 7.9 percent for purposes of determining the U.S. pension plan expense.  For fiscal year 2011 U.S. pension plan expense, Modine has assumed a rate of 8.1 percent, net of administrative expenses.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

With respect to the postretirement plans, for measurement purposes, the assumed healthcare cost trend rates were as follows:

Years ended March 31
 
2010
   
2009
 
             
Healthcare costs trend rate assumed for next year (pre-65)
    6.8 %     7.5 %
Healthcare costs trend rate assumed for next year (post-65)
    6.8 %     7.5 %
Ultimate trend rate
    5.0 %     5.0 %
Year the rate reaches the ultimate trend rate
    2014       2014  

Assumed healthcare cost trend rates affect the amounts reported for the postretirement plans.  A one percentage point change in assumed healthcare cost trend rates would have the following effects:

   
One percentage point
 
Year ended March 31, 2010
 
Increase
   
Decrease
 
             
Effect on total of service and interest cost
  $ 17     $ (18 )
Effect on postretirement benefit obligation
    278       (272 )

The funding policy for domestic qualified pension plans is to contribute annually at a minimum, the amount necessary on an actuarial basis to provide for benefits in accordance with applicable law and regulation.  Modine anticipates that it will make contributions of $10,888 to these plans during fiscal 2011.  Modine also expects to contribute $821 to its postretirement benefit plans in fiscal 2011.

The estimated benefit payments, which reflect future service, as appropriate, for the next ten fiscal years are as follows:

Years ended March 31
     
   
Pension
 
2011
  $ 11,866  
2012
    11,985  
2013
    12,200  
2014
    13,043  
2015
    14,211  
2016-2020
    79,847  

Note 5:  Operating leases

Modine leases various facilities and equipment under operating leases.  Rental expense for these leases totaled $10,436 in fiscal 2010, $6,479 in fiscal 2009 and $6,762 in fiscal 2008.

Future minimum rental commitments at March 31, 2010 under non-cancelable operating leases are as follows:

Years ending March 31
     
       
2011
  $ 4,442  
2012
    2,115  
2013
    1,316  
2014
    937  
2015
    812  
2016 and beyond
    2,998  
Total future minimum rental commitments
  $ 12,620  


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Note 6:  Other (income) expense – net

Other (income) expense – net was comprised of the following:

Years ended March 31
 
2010
   
2009
   
2008
 
                   
Equity in loss (earnings) of non-consolidated affiliates
  $ 101     $ 5,871     $ (2,679 )
Interest income
    (663 )     (1,644 )     (1,657 )
Foreign currency transactions
    (3,399 )     6,497       (2,071 )
Other non-operating income - net
    (1,623 )     (668 )     (1,987 )
Total other (income) expense - net
  $ (5,584 )   $ 10,056     $ (8,394 )

For the year ended March 31, 2010, the Company sold its 50 percent ownership of Anhui Jianghaui Mando Climate Control Co. Ltd. for $4,860, resulting in a gain of $1,465 included in other non-operating (income) expense – net.

Equity in loss (earnings) of non-consolidated affiliates for the year ended March 31, 2009 included an impairment charge of $7,596 related to an equity investment due to a decline in its value which was “other than temporary”.

Foreign currency transactions for the years ended March 31, 2010, 2009 and 2008 were primarily comprised of foreign currency transaction (gains) losses on inter-company loans denominated in a foreign currency in Brazil.

Note 7:  Income taxes

The U.S. and foreign components of (loss) earnings from continuing operations before income taxes and the income tax expense consisted of the following:

Years ended March 31
 
2010
   
2009
   
2008
 
                   
Components of (loss) earnings from continuing operations before income taxes:
                 
United States
  $ (42,234 )   $ (80,326 )   $ (103,865 )
Foreign
    31,768       (22,627 )     87,246  
Total loss from continuing operations before income taxes
  $ (10,466 )   $ (102,953 )   $ (16,619 )
Income tax expense (benefit):
                       
Federal:
                       
Current
  $ (273 )   $ (974 )   $ (2,327 )
Deferred
    1,721       4,610       22,720  
State:
                       
Current
    46       491       (22 )
Deferred
    (1,664 )     (3,683 )     (3,994 )
Foreign:
                       
Current
    6,665       13,958       22,119  
Deferred
    3,337       (13,758 )     (688 )
Total income tax expense
  $ 9,832     $ 644     $ 37,808  

Certain of the Company’s foreign operations generated earnings from continuing operations before income taxes during fiscal 2010, which resulted in a foreign income tax provision within these tax jurisdictions.  The foreign income tax provision more than offset the income tax benefit of $170 recognized on the domestic loss from continuing operations before income taxes, which resulted in a consolidated provision for income taxes despite the consolidated loss from continuing operations before income taxes for fiscal 2010.  The changing mix of foreign earnings and domestic losses, combined with year-over-year changes in the valuation allowance, are the most significant factors impacting changes in the effective tax rate for the years ended March 31, 2010, 2009 and 2008.

The Company allocates income tax expense between continuing operations, discontinued operations, and other comprehensive income.  Accounting for income taxes is applied by tax jurisdiction, and in periods in which there is loss from continuing operations before income taxes and pre-tax income in another category (e.g., discontinued operations or other comprehensive income), income tax expense is first allocated to the other sources of income, with a related benefit recorded in continuing operations.  During the year ended March 31, 2010, no income tax expense was allocated to financial statement components other than continuing operations since the Company experienced an overall net loss from those components.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Income tax expense attributable to (loss) earnings from continuing operations before income taxes differed from the amounts computed by applying the statutory U.S. federal income tax rate as a result of the following:

Years ended March 31
 
2010
   
2009
   
2008
 
                   
Statutory federal tax
    (35.0 %)     (35.0 %)     (35.0 %)
State taxes, net of federal benefit
    (17.6 )     (3.3 )     (25.8 )
Taxes on non-U.S. earnings and losses
    (1.3 )     2.3       (49.0 )
Valuation allowance
    96.7       32.1       348.5  
Research and development tax credit
    (4.9 )     (1.5 )     (7.6 )
Deferred tax adjustments
    15.3       -       -  
Goodwill impairment
    -       2.1       6.6  
Foreign tax rate changes
    -       -       (15.9 )
Reserve for uncertain tax positions
    (5.6 )     (1.5 )     7.7  
Dividend repatriation
    32.8       2.8       (0.5 )
Other
    13.5       2.6       (1.5 )
Effective tax rate
    93.9 %     0.6 %     227.5 %

The following is a reconciliation of the provision for income taxes and effective tax rates for fiscal 2010:

   
Domestic
   
Foreign
   
Total
   
%
 
(Benefit from) provision for continuing operations before income taxes
  $ (42,234 )   $ 31,768     $ (10,466 )      
                               
Benefit from income taxes at federal statutory rate
  $ (14,782 )   $ 11,119       (3,663 )     (35.0 %)
                                 
State taxes, net of federal benefit
    (1,839 )     -       (1,839 )     (17.6 )
Taxes on non-U.S. earnings and losses
    -       (141 )     (141 )     (1.3 )
Valuation allowance
    10,818       (699 )     10,119       96.7  
Research and development tax credit
    -       (516 )     (516 )     (4.9 )
Deferred tax adjustments
    1,607       -       1,607       15.3  
Reserve for uncertain tax positions
    -       (583 )     (583 )     (5.6 )
Dividend repatriation
    3,438       -       3,438       32.8  
Other, net
    589       821       1,410       13.5  
(Benefit from) provision for income taxes
  $ (169 )   $ 10,001     $ 9,832       93.9 %

Given the continued underperformance and current market condition of the Original Equipment – North America segment, the Company continues to maintain a valuation allowance and recorded a valuation allowance of $10,818 against its net deferred tax assets in the U.S. during fiscal 2010.  Also during fiscal 2010, the Company reduced the valuation allowance in its foreign operations by $699.  This reduction was largely related to a $2,521 decrease in the valuation allowance required in the German tax jurisdiction, partially offset by the establishment of a valuation allowance of $1,326 in the Austria tax jurisdiction based on the determination that it was more likely than not that the Austria net deferred tax assets will not be realized.  The Company will continue to provide a valuation allowance against its net deferred tax assets in each of the applicable jurisdictions going forward until the need for a valuation allowance is eliminated.  The need for the valuation allowance will be eliminated when the Company determines it is more likely than not that the deferred tax assets will be realized.

During fiscal 2010, the Company completed restructuring actions in various foreign tax jurisdictions in which distributions were made, characterized as taxable dividends, which affected the effective tax rate by $3,438.  In addition, the Company recorded a one-time adjustment of $1,607 to prior year deferred taxes in the U.S.  Both the dividends and deferred tax adjustments were fully offset by a valuation allowance.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

During fiscal 2009, the Company experienced overall losses in tax jurisdictions outside of the U.S. as compared with earnings recorded in fiscal 2008.  These tax jurisdictions generally have lower statutory tax rates, which contributed to the change in the effective tax rate from fiscal 2008 to fiscal 2009.

During fiscal 2008, the Company recorded a one-time tax benefit of $2,640 related primarily to a tax rate reduction in Germany.  In addition, the Company recorded a charge of $1,099 related to the impairment of goodwill in the U.S.

The significant components of deferred income tax (benefit) expense attributable to (loss) earnings from continuing operations before income taxes are summarized as follows:

Years ended March 31
 
2010
   
2009
   
2008
 
                   
Pensions
  $ (2,373 )   $ 789     $ 1,142  
Depreciation
    (3,564 )     (15,187 )     (4,387 )
Inventories
    (726 )     (1,619 )     (94 )
Employee benefits
    4,195       2,361       (4,204 )
Benefit of tax losses and credit carryforwards
    (8,818 )     (27,391 )     (9,478 )
Goodwill and other intangible assets
    4,176       4,038       (21,909 )
Foreign currency (loss) gain
    (410 )     (6,272 )     1,104  
Accrued liabilities
    (1,210 )     195       (2,131 )
Valuation allowance
    10,119       33,004       57,916  
Other
    2,005       (2,749 )     79  
Total deferred income tax expense (benefit)
  $ 3,394     $ (12,831 )   $ 18,038  

The tax effects of temporary differences that give rise to significant portions of the deferred tax assets and deferred tax liabilities are as follows:

March 31
 
2010
   
2009
 
             
Deferred tax assets:
           
Accounts receivable
  $ 874     $ 933  
Inventories
    4,578       3,757  
Plant and equipment
    12,508       13,305  
Employee benefits
    44,541       38,257  
Net operating loss, capital loss and credit carryforwards
    57,502       49,026  
Other, principally accrued liabilities
    32,125       38,182  
Total gross deferred tax assets
    152,128       143,460  
Less: valuation allowance
    117,816       104,471  
Net deferred tax assets
    34,312       38,989  
                 
Deferred tax liabilities:
               
Goodwill
    5,376       4,171  
Plant and equipment
    27,507       29,674  
Other
    4,822       4,898  
Total gross deferred tax liabilities
    37,705       38,743  
Net deferred tax (liability) asset
  $ (3,393 )   $ 246  

The valuation allowance for deferred tax assets as of March 31, 2009 was $104,471.  The valuation allowance increased by $13,345 in fiscal 2010 related to the valuation allowance against the net U.S. deferred tax assets of $12,901 ($2,083 of which was applied to other comprehensive income), the valuation allowance against the net Austrian deferred tax assets of $1,465 ($139 of which was applied to other comprehensive income), the valuation allowance reduction of the net German deferred tax assets of $1,853 ($668 of which was applied to the other comprehensive income), and miscellaneous other valuation allowances recorded in other foreign tax jurisdictions of $497 along with a foreign exchange impact of $335.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

During the year ended March 31, 2010, the Company experienced a net decrease of $682 in the liability for unrecognized tax benefits.  A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:

   
2010
   
2009
 
             
Balance, April 1
  $ 5,157     $ 7,991  
Gross increases - tax positions in prior period
    21       2,542  
Gross decreases - tax positions in prior period
    (287 )     (1,360 )
Gross increases - tax positions in current period
    574       870  
Settlements
    (256 )     (3,409 )
Lapse of statute of limitations
    (806 )     (763 )
Foreign currency impact
    72       (714 )
Balance, March 31
  $ 4,475     $ 5,157  

The Company’s total gross liability for unrecognized tax benefits as of March 31, 2010 is $4,475, and if recognized, only $3,013 of this amount would have an effect on the effective tax rate as $1,462 of the unrecognized tax benefits are offset by a corresponding increase to the valuation allowance and therefore would have no effect on the effective tax rate.

In accordance with its accounting policy, the Company recognizes accrued interest and penalties related to unrecognized tax benefits as a component of income tax expense.  During fiscal 2010, interest and penalties of $38 was released as a component of income tax expense in the consolidated statement of operations.  At March 31, 2010, accrued interest and penalties of $268 are included in the consolidated balance sheet.

The Company files income tax returns in multiple jurisdictions and is subject to examination by taxing authorities throughout the world.  At March 31, 2010, the Company was not engaged in any routine income tax examinations by any federal taxing authority.  During fiscal 2009, the Internal Revenue Service concluded its income tax examination of the Company’s consolidated tax returns for the years ended March 31, 2004 through March 31, 2007.  On March 18, 2010, the Company concluded a state income tax audit for the years ended March 31, 2004 through March 31, 2008.  As a result of this audit, the Company reversed previously established reserves of $257.  The Company does not anticipate the gross liability for unrecognized tax benefits to significantly change in the next twelve months other than that which will result from the expiration of the applicable statute of limitations.

The following tax years remain subject to examination by the respective major tax jurisdictions:

Austria
Fiscal 2008 - 2009
Brazil
Fiscal 2005 - 2009
Germany
Fiscal 2006 - 2009
United States
Fiscal 2008 - 2009

At March 31, 2010, the Company has foreign tax credit carryforwards of $4,990 that, if not utilized against domestic taxes, will expire between 2015 and 2017.  The Company has federal and state research and development tax credits of $7,772 that, if not utilized against domestic taxes, will expire between 2018 and 2028.  The Company also has various state and local tax loss carryforwards of $118,157 that, if not utilized against state apportioned taxable income, will expire at various times during the years 2012 through 2030.  In addition, the Company has tax loss carryforwards of $145,112 in various tax jurisdictions throughout the world.  Certain of these carryforwards, primarily in the U.S. and Germany, are offset by a valuation allowance.  If not utilized against taxable income, these tax losses will expire as follows:


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Years ending March 31
     
       
2013
  $ 20  
2014
    3,511  
2015
    2,651  
2016
    303  
2017
    1,074  
2018
    1,717  
2020
    163  
2029
    56,273  
2030
    28,068  
No expiration date
    51,332  

During the year ended March 31, 2010, the Company reversed $1,200 of U.S. tax on undistributed earnings of certain subsidiaries and equity investment companies considered not permanently reinvested as a result of the disposition of such investments.  Undistributed earnings considered permanently reinvested in foreign operations totaled $398,525 at March 31, 2010, and no provision has been made for any U.S. taxes that would be payable upon the distribution of such earnings.

As further discussed in Note 13, the South Korean business, retained aftermarket environmental liability in The Netherlands and the Electronics Cooling business are presented as discontinued operations in the comparative consolidated financial statements.  The loss from discontinued operations for the fiscal years ended March 31, 2010, 2009 and 2008 has been presented net of income tax expense of $538, $552 and $6,552, respectively.  For the year ended March 31, 2010, the loss on sale of discontinued operations for the South Korean business has been presented net of income tax (benefit) expense of $0.  For the year ended March 31, 2009, the gain on sale of discontinued operations for the Electronics Cooling business has been presented net of income tax expense (benefit) of $0.

Note 8:  Earnings per share

The computational components of basic and diluted earnings per share are summarized below:


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Years Ended March 31
 
2010
   
2009
   
2008
 
                   
Basic and Diluted:
                 
Loss from continuing operations
  $ (20,298 )   $ (103,597 )   $ (54,427 )
Less: Dividends and undistributed earnings attributable to unvested shares
    -       (56 )     (182 )
Net loss from continuing operations available to common shareholders
    (20,298 )     (103,653 )     (54,609 )
Discontinued operations:
                       
Net loss from discontinued operations, net of taxes
    (8,981 )     (5,015 )     (14,206 )
Less: Unditrbuted earnings attributable to unvested shares
    -       -       -  
Net loss from discontinued operations available to common shareholders
    (8,981 )     (5,015 )     (14,206 )
Net loss available to common shareholders
  $ (29,279 )   $ (108,668 )   $ (68,815 )
                         
Basic Earnings Per Share:
                       
Weighted average shares outstanding - basic
    39,298       32,077       32,030  
                         
Loss from continuing operations per common share
  $ (0.52 )   $ (3.23 )   $ (1.70 )
Net loss from discontinued operations per common share
    (0.23 )     (0.16 )     (0.45 )
Net loss per common share - basic
  $ (0.75 )   $ (3.39 )   $ (2.15 )
                         
Diluted Earnings Per Share:
                       
Weighted average shares outstanding - diluted
    39,298       32,077       32,030  
                         
Loss from continuing operations per common share
  $ (0.52 )   $ (3.23 )   $ (1.70 )
Net loss from discontinued operations per common share
    (0.23 )     (0.16 )     (0.45 )
Net loss per common share - diluted
  $ (0.75 )   $ (3.39 )   $ (2.15 )

For the years ended March 31, 2010, 2009 and 2008, the calculation of diluted earnings per share excludes all potentially dilutive shares, which includes 2,094, 2,472 and 2,672 stock options, respectively and 68, 0 and 50 performance share awards, respectively, as these shares were anti-dilutive.

Note 9:  Cash and cash equivalents

Under Modine’s cash management system, cash balances at certain banks are funded when checks are presented for payment.  To the extent that checks issued, but not yet presented for payment, exceed the balance on hand at the specific bank they were written against, the amount of those un-presented checks is included in accounts payable.  These credit balances included in accounts payable were $408, $2,048 and $2,441 at March 31, 2010, 2009 and 2008, respectively.

All short-term investments at March 31, 2010 and 2009 that were of an initial duration of less than three months were recorded as cash equivalents.  The recorded amount of these cash equivalents approximated fair value based on the short maturity of these instruments.

Note 10:  Inventories


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Inventories consisted of the following:

March 31
 
2010
   
2009
 
             
Raw materials and work in process
  $ 71,329     $ 64,159  
Finished goods
    28,230       23,918  
Total inventories
  $ 99,559     $ 88,077  

Note 11:  Property, plant and equipment

Property, plant and equipment, including depreciable lives, consisted of the following:

March 31
 
2010
   
2009
 
             
Land
  $ 12,076     $ 13,576  
Buildings and improvements (10-40 years)
    252,621       259,172  
Machinery and equipment (3-12 years)
    635,063       605,375  
Office equipment (3-10 years)
    106,877       105,711  
Transportation equipment (3-9 years)
    3,782       4,400  
Construction in progress
    45,677       58,695  
      1,056,096       1,046,929  
Less accumulated depreciation
    (637,480 )     (620,364 )
Net property, plant and equipment
  $ 418,616     $ 426,565  

Depreciation expense totaled $65,096, $68,240 and $73,194 for the years ended March 31, 2010, 2009 and 2008, respectively.

The Company conducted an assessment for the impairment of certain property, plant and equipment within each of the segments in fiscal 2010 based on certain triggering events during the year.  During this assessment, certain long-lived assets were deemed to be impaired and a write-down to fair value was considered necessary.  As a result, impairment charges of $6,548 were recorded during fiscal 2010.  The impairment charges included $5,343 related to assets in the Original Equipment – North America segment for a facility with projected cash flows unable to support its asset base, for assets related to a held-for-sale facility with projected cash flows unable to support its asset base and other impairment charges for specific assets which have become idle during fiscal 2010 and are no longer being utilized by the Company.  Impairment charges also included $1,027 related to assets in the Original Equipment – Europe segment for assets specific to a program that is not expected to generate future cash flows and other impairment charges for specific assets that became idle during fiscal 2010 and are no longer being utilized by the Company.

Impairment charges of $26,799 were recorded during fiscal 2009.  The impairment charges included $15,829 related to assets in the Original Equipment – North America segment for a facility with projected cash flows unable to support its asset base, for assets related to a cancelled program, a program which was not able to support its asset base and assets no longer in use.  Impairment charges also included $10,562 related to certain manufacturing facilities in the Original Equipment – Europe segment with projected cash flows unable to support their asset bases.  Also included in the impairment charges was $408 related to certain assets in the Commercial Products segment for the cancellation of a product in its development stage.

Impairment charges of $11,574 were recorded during fiscal 2008.  The impairment charges included $3,407 related to assets in the Original Equipment – North America segment for a program which was not able to support its asset base.  Also included in the impairment charges was $4,675 related to assets in the Tübingen, Germany manufacturing facility within the Original Equipment – Europe segment based on the closure of this facility, and $3,492 related to certain assets in the Commercial Products segment for the cancellation of a product in its development stage.

Gains and losses related to the disposal of property, plant and equipment are recorded in cost of sales or selling, general, and administrative expenses depending on the nature of the assets disposed.  Total gains related to the disposal of property, plant and equipment were $223, $3,904 and $3,297 for the years ended March 31, 2010, 2009 and 2008, respectively.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Assets held for sale at March 31, 2010 of $9,870 consist of certain facilities which the Company has closed or intends to close within the Original Equipment – North America and Original Equipment – Europe segments.  The Company is currently marketing these facilities for sale.

Note 12:  Investment in affiliates

Investments in non-consolidated affiliates are accounted for under the equity method, and consisted of the following:

March 31
       
2010
   
2009
 
   
Percent-owned
             
Nikkei Heat Exchanger Company, Ltd. (Japan)
  50%     $ 3,079     $ 3,253  
Constructions Mechaniques Mota, S.A. (France)
  -       -       4,650  
Anhue Jianghaui Mando Climate Control Co. Ltd. (China)
  -       -       3,365  
Total net investment in affiliates
        $ 3,079     $ 11,268  

During fiscal 2010, the Company sold its 50 percent ownership of Anhui Jianghaui Mando Climate Control Co. Ltd. for cash proceeds of $4,860, resulting in a gain of $1,465.  Also during fiscal 2010, the Company sold its 41% investment in Construction Mechaniques Mota, S.A. to its joint venture partner for a promissory note in the amount of 3,350 euro ($4,526 U.S. equivalent), that will be paid in installments over the next 4 years.

During fiscal 2009, a long-lived asset impairment charge of $7,596 was recorded related to the investment in Construction Mechaniques Mota, S.A. which was determined to have a decline in its value that was “other than temporary.”
 
At March 31, 2010, the investment in Nikkei Heat Exchanger Company, Ltd. is equal to the Company's investment in the underlying assets.

The results of operations for Nikkei Heat Exchanger Company, Ltd. and Anhui Jianghaui Mando Climate Control Co. Ltd. (prior to the sale) are reported in the consolidated financial statements using a one-month reporting delay.  Operating results for Construction Mechaniques Mota, S.A. (prior to the sale) were included using a three-month delay.  Equity in earnings from non-consolidated affiliates is reported under other (income) expense – net in the consolidated statements of operations.  These (loss) earnings for fiscal years ended March 31, 2010, 2009 and 2008 were ($101), $1,725 and $2,679, respectively.

Note 13:  Discontinued operations

During fiscal 2009, the Company announced the intended divestiture of the South Korea-based vehicular, heating, ventilating and air conditioning (HVAC) business.  Based on the accounting for the disposal of long-lived assets, it was determined during the fourth quarter of fiscal 2009 that the South Korean business should be presented as held for sale and as a discontinued operation in the consolidated financial statements.  The South Korean business was formerly presented as part of the Original Equipment – Asia segment.  The balance sheet amounts relating to the South Korean business have been reclassified to assets held for sale and liabilities of business held for sale on the consolidated balance sheet, and the operating results have been separately presented as a discontinued operation in the consolidated statement of operations for all periods presented.  On December 23, 2009, the Company sold 100 percent of the shares of the South Korea-based HVAC business for net cash proceeds of $10,515.  The Company recorded a loss on sale, net of taxes, of $611 during fiscal 2010.

During fiscal 2010, the Company recorded environmental cleanup and remediation expenses of $911 as a component of loss from discontinued operations related to a facility in the Netherlands that was sold as part of the spin-off of the Company’s Aftermarket business on July 22, 2005.

On May 1, 2008, the Company sold substantially all of the assets of its Electronics Cooling business for $13,149, $2,510 of which is in the form of seller financing with subordinated, promissory notes delivered by the buyer, with the remaining sales proceeds of $10,639 received in cash.  The Company paid transaction expenses of $437.  The Company recorded a gain on sale of $2,466, net of taxes for fiscal 2009.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The major classes of assets and liabilities held for sale of the South Korean business at March 31, 2009 included in the consolidated balance sheets was as follows:

March 31
 
2009
 
       
Assets held for sale:
     
Receivables - net
  $ 17,533  
Inventories
    9,097  
Other current assets
    2,543  
Total current assets held for sale
    29,173  
Property, plant and equipment - net
    33,500  
Other noncurrent assets
    828  
Total noncurrent assets held for sale
    34,328  
Total assets held for sale
  $ 63,501  
         
Liabilities of business held for sale:
       
Accounts payable
  $ 20,048  
Accrued expenses and other current liabilities
    7,970  
Total current liabilities of business held for sale
    28,018  
Other noncurrent liabilities
    12,181  
Total liabilities of business held for sale
  $ 40,199  

The following results of the South Korean and Electronics Cooling businesses and the environmental cleanup and remediation in the Netherlands have been presented as loss from discontinued operations in the consolidated statement of operations:

Years ended March 31
 
2010
   
2009
   
2008
 
                   
Net sales
  $ 136,762     $ 172,867     $ 288,918  
Cost of sales and other expenses
    144,594       179,796       296,572  
Loss before income taxes
    (7,832 )     (6,929 )     (7,654 )
Provision for income taxes
    538       552       6,552  
Loss from discontinued operations
  $ (8,370 )   $ (7,481 )   $ (14,206 )

Upon designation as held for sale, the carrying value of the assets of the business are measured at the lower of their carrying value or their estimated fair value, less costs to sell.  The Company recognized a loss of $7,646 and $6,031 on the South Korean asset group to reduce their carrying value to the estimated fair value, less costs to sell, in fiscal 2010 and 2009, respectively.

During fiscal 2008, the Company recorded an impairment charge of $12,077 related to assets at the Asan City, South Korea manufacturing facility based on their underperforming operations and declining outlook.

Note 14:  Restructuring, plant closures and other related costs

During fiscal 2007, Modine announced a global competitiveness program intended to reduce costs, accelerate technology development, and accelerate market and geographic expansion – all intended to stimulate growth and profits.  The Company initiated the following plans: relocated its Harrodsburg, Kentucky-based research and development activities to its technology center in Racine, Wisconsin; offered a voluntary early retirement program in the U.S.; implemented a reduction in force in the U.S.; and announced facility closings within North America in Toledo, Ohio; Richland, South Carolina; Jackson, Mississippi; and Clinton, Tennessee.  All of these facilities were closed as of March 31, 2009.

During fiscal 2008, the Company announced the closure of three U.S. manufacturing plants in Camdenton, Missouri; Pemberville, Ohio; and Logansport, Indiana, along with the Tübingen, Germany facility. These measures were aimed at realigning the Company’s manufacturing operations, improving profitability and strengthening global competitiveness. The Tübingen, Germany facility closure was completed at the end of the third quarter of fiscal 2010. The Pemberville, Ohio closure was completed by the end of fiscal 2010 and the Logansport, Indiana closure is anticipated to be completed in the first quarter of fiscal 2011. The Camdenton, Missouri closure is anticipated to be completed by the end of fiscal 2011. During fiscal 2009, the Company completed workforce reductions across all business segments. The completed workforce reductions included an approximate 25 percent reduction of the workforce in the Company’s Racine, Wisconsin headquarters and a significant reduction throughout its European facilities, including at its European headquarters in Bonlanden, Germany.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

On October 22, 2009, the Company announced the closure of its Harrodsburg, Kentucky manufacturing facility.  This closure is anticipated to be completed in the first quarter of fiscal 2011.

Since the commencement of these plant closures and workforce reductions, the Company has incurred $33,648 of termination charges, $1,863 of pension curtailment charges and $17,455 of other closure costs in the aggregate.  The Company also anticipates that it will incur the following additional costs through fiscal 2012 as a result of these closures: $1,600 of employee-related costs and $5,200 of other costs such as equipment moving costs, accelerated depreciation and miscellaneous facility closing costs.  In addition, the Company anticipates that it will incur additional cash expenditures of approximately $9,100 related to these closures.

Changes in the accrued restructuring liability for the years ended March 31, 2010, 2009 and 2008 were comprised of the following related to the above-described restructuring activities:

   
2010
   
2009
   
2008
 
Termination Benefits:
                 
Balance, April 1
  $ 21,412     $ 5,161     $ 2,313  
Additions
    2,657       29,896       4,221  
Adjustments
    (3,336 )     (565 )     (656 )
Effect of exchange rate changes
    773       (486 )     -  
Payments
    (16,766 )     (12,594 )     (717 )
Balance, March 31
  $ 4,740     $ 21,412     $ 5,161  

The following is the summary of restructuring and other repositioning costs recorded related to the programs announced during the years ended March 31, 2010, 2009 and 2008:

   
2010
   
2009
   
2008
 
Restructuring (income) charges:
                 
Employee severance and related benefits
  $ (679 )   $ 29,331     $ 3,565  
Accelerated vesting of stock-based compensation
    -       1,073       -  
Total restructuring (income) charges
    (679 )     30,404       3,565  
                         
Other repositioning costs:
                       
Pension curtailment charges
    -       -       1,863  
Consulting fees
    1,637       4,151       -  
Miscellaneous other closure costs
    6,302       4,937       4,736  
Total other repositioning costs
    7,939       9,088       6,599  
Total restructuring and other repositioning costs
  $ 7,260     $ 39,492     $ 10,164  

The total restructuring and other repositioning costs were recorded in the consolidated statement of operations for the year ended March 31, 2010 as follows: $6,342 was recorded as a component of cost of sales; $1,597 was recorded as a component of selling, general and administrative expenses; and $679 was recorded as restructuring income.  The Company accrues severance in accordance with its written plan, procedures and relevant statutory requirements.  Restructuring income relates to reversals of severance liabilities due to employee terminations prior to the completion of required retention periods and favorable negotiations of severance packages.  Final severance negotiations were reached including an early retirement option in lieu of severance.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The total restructuring and other repositioning costs were recorded in the consolidated statement of operations for the year ended March 31, 2009 as follows: $5,483 was recorded as a component of cost of sales; $3,605 was recorded as a component of selling, general and administrative expenses; and $30,404 was recorded as restructuring charges.

The total restructuring and other repositioning costs were recorded in the consolidated statement of operations for the year ended March 31, 2008 as follows: $5,468 was recorded as a component of cost of sales; $1,131 was recorded as a component of selling, general and administrative expenses; and $3,565 was recorded as restructuring charges.

Note 15:  Goodwill

The changes in the carrying amount of goodwill, by segment and in the aggregate, were as follows:

   
March 31, 2008
   
Fluctuations in foreign currency
   
Impairment
   
Adjustment
   
March 31, 2009
   
Fluctuations in foreign currency
   
March 31, 2010
 
                                           
OE - Asia
                                         
Gross goodwill
  $ 522     $ (5 )   $ -     $ -     $ 517     $ 3     $ 520  
Accumulated impairments
    -       -       -       -       -       -       -  
Net goodwill balance
    522       (5 )     -       -       517       3       520  
                                                         
OE - Europe
                                                       
Gross goodwill
    10,519       (1,514 )     -       -       9,005       152       9,157  
Accumulated impairments
    -       -       (9,005 )     -       (9,005 )     (152 )     (9,157 )
Net goodwill balance
    10,519       (1,514 )     (9,005 )     -       -       -       -  
                                                         
OE - North America
                                                       
Gross goodwill
    23,769       -       -       -       23,769       -       23,769  
Accumulated impairments
    (23,769 )     -       -       -       (23,769 )     -       (23,769 )
Net goodwill balance
    -       -       -       -       -       -       -  
                                                         
South America
                                                       
Gross goodwill
    14,066       (3,434 )     -       -       10,632       3,237       13,869  
Accumulated impairments
    -       -       -       -       -       -       -  
Net goodwill balance
    14,066       (3,434 )     -       -       10,632       3,237       13,869  
                                                         
Commercial Products
                                                       
Gross goodwill
    19,725       (4,946 )     -       (289 )     14,490       673       15,163  
Accumulated impairments
    -       -       -       -       -       -       -  
Net goodwill balance
    19,725       (4,946 )     -       (289 )     14,490       673       15,163  
                                                         
Total
                                                       
Gross goodwill
    68,601       (9,899 )     -       (289 )     58,413       4,065       62,478  
Accumulated impairments
    (23,769 )     -       (9,005 )     -       (32,774 )     (152 )     (32,926 )
Net goodwill balance
  $ 44,832     $ (9,899 )   $ (9,005 )   $ (289 )   $ 25,639     $ 3,913     $ 29,552  

Goodwill is assessed for impairment by the Company annually in its third quarter or more frequently if events or circumstances change that would, more likely than not, reduce the fair value of the reporting unit below its carrying value.  In fiscal 2010, the fair value of the Company’s reporting units exceeded their respective book values.  The Company conducted its annual assessment for goodwill impairment in the third quarter of fiscal 2009 by applying a fair value-based test and determined that the Original Equipment – Europe segment goodwill was fully impaired, necessitating a charge of $9,005.  The impairment was due to a declining outlook for the Original Equipment – Europe segment as a result of weak European sales volumes, lower gross margins related to new product launches and continued pricing pressures.  The fair value of the Company’s remaining reporting units exceeded their respective book values based on the fiscal 2009 assessment.

The $289 adjustment to goodwill in the Commercial Products segment relates to an income tax benefit recorded during fiscal 2009 in this segment’s Airedale business.  This benefit related to the period prior to the May 3, 2006 acquisition of this business, that resulted in a reduction to goodwill.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

A goodwill impairment charge of $23,769 was recorded in fiscal 2008 in the Original Equipment – North America segment due to a declining outlook for this segment.

Note 16:  Intangible assets

Intangible assets were comprised of the following:

   
March 31, 2010
   
March 31, 2009
 
   
Gross Carrying Value
   
Accumulated Amortization
   
Net Intangible Assets
   
Gross Carrying Value
   
Accumulated Amortization
   
Net Intangible Assets
 
                                     
Amortized intangible assets:
                                   
Patents and product technology
  $ 3,952     $ (3,952 )   $ -     $ 3,952     $ (3,952 )   $ -  
Trademarks
    8,726       (2,860 )     5,866       8,395       (2,192 )     6,203  
Other intangibles
    416       (337 )     79       352       (204 )     148  
Total amortized intangible assets
    13,094       (7,149 )     5,945       12,699       (6,348 )     6,351  
Unamortized intangible assets:
                                               
Tradename
    943       -       943       690       -       690  
Total intangible assets
  $ 14,037     $ (7,149 )   $ 6,888     $ 13,389     $ (6,348 )   $ 7,041  

The amortization expense for intangible assets for the fiscal years ended March 31, 2010, 2009 and 2008 was $670, $960 and $1,001, respectively.  The estimated amortization expense related to intangible assets is expected to be as follows:

Fiscal Year
 
Estimated Amortization Expense
 
       
2011
  $ 678  
2012
    582  
2013
    582  
2014
    582  
2015 & beyond
    3,521  

Note 17:  Indebtedness

Long-term indebtedness was comprised of the following:


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Type of issue
 
Interest rate percentage at March 31, 2010
   
Fiscal year of maturity
   
March 31, 2010
   
March 31, 2009
 
                         
Denominated in U.S. dollars:
                       
Fixed rate -
                       
2015 Notes
    10.00       2016     $ 60,726     $ 75,000  
2017 Notes A
    10.75       2018       40,484       50,000  
2017 Notes B
    10.75       2018       20,242       25,000  
Variable rate -
                               
Revolving credit facility
    4.99       2012       7,500       87,000  
                      128,952       237,000  
Capital lease obligations
            2011-2029       7,234       7,178  
                      136,186       244,178  
Less current portion
                    234       196  
Total long-term debt
                  $ 135,952     $ 243,982  

At March 31, 2009, the Company had $75,000, 10.0 percent Senior Notes issued in a private placement, maturing on September 29, 2015 (“2015 Notes”), and $50,000, 10.75 percent Senior Notes maturing on December 7, 2017 (“2017 Notes A”) and $25,000, 10.75 percent Senior Notes maturing on December 7, 2017 (“2017 Notes B”) issued in a second private placement.  Also, at March 31, 2009, the Company had a $175,000 domestic revolving credit facility with an outstanding balance of $87,000.  On May 15, 2009, Modine Holding GmbH and Modine Europe GmbH, each a subsidiary of the Company, entered into a Credit Facility Agreement with an available line of 15,000 euro with Deutsche Bank AG.  Under the terms of the credit agreement, the availability under the domestic revolving credit facility was reduced by $15,000 to $160,000 on May 15, 2009 upon entering into the Credit Facility Agreement with Deutsche Bank AG.

In September 2009, the Company entered into a Second Amendment to Credit Agreement and a Third Amendment to Credit Agreement with its primary lenders and a Waiver and Third Amendment to Note Purchase Agreement and a Fourth Amendment to Note Purchase Agreement with the Senior Note holders.  These agreements waived technical defaults that existed at the time of the amendments.  In addition, various amendments were made to the existing debt agreements as further described below:

 
·
The amount of cash restructuring charges that may be added back for purposes of calculating adjusted EBITDA was increased by $20,000 to $34,000; and
 
·
The amount of permitted capital expenditures was increased by $5,000 from $65,000 to $70,000 for the current fiscal year, and any amounts of unused capital expenditures for the current fiscal year (not to exceed $5,000) may be carried over to the next fiscal year.

The Company was required to prepay its outstanding domestic revolving credit facility and Senior Note borrowings with 50% of the net proceeds from the September 30, 2009 common stock offering, resulting in a mandatory prepayment of $46,438.  In conjunction with the mandatory prepayment of the Senior Note borrowings of $28,548, the Company was required to pay a prepayment penalty of $3,449 to the holders of the Senior Notes.  This prepayment penalty was included in interest expense in the consolidated statement of operations.  The availability under the domestic revolving credit facility was reduced by $17,890 to $142,110 for the portion of the mandatory prepayment that was applied to the outstanding domestic revolving credit facility.  In addition to the mandatory prepayment, the Company voluntarily repaid the majority of its outstanding domestic revolving credit facility with the remaining proceeds from the common stock offering and the sale of the South Korean business.

At March 31, 2010, the Company had $60,726 outstanding on the 2015 Notes, $40,484 outstanding on the 2017 Notes A and $20,242 outstanding on the 2017 Notes B.  Also at March 31, 2010, the Company had $7,500 outstanding on the $142,110 domestic revolving credit facility, that expires in July 2011.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The Company’s debt agreements require it to maintain compliance with various covenants.  One restrictive limitation is a minimum adjusted earnings before interest, taxes, depreciation and amortization (EBITDA) covenant.  Adjusted EBITDA is defined as (loss) earnings from continuing operations before interest expense and provision for income taxes, adjusted to exclude unusual, non-recurring or extraordinary non-cash charges and up to $34.0 million of cash restructuring and repositioning charges and further adjusted to add back depreciation and amortization expense.  Adjusted EBITDA does not represent, and should not be considered, an alternative to (loss) earnings from continuing operations as determined by GAAP, and the calculation may not be comparable to similarly titled measures reported by other companies.  For the four consecutive quarters ended March 31, 2010, the Company was required to maintain a minimum adjusted EBITDA level of $35,000.  

Beginning in the fourth quarter of fiscal 2010, the Company is required to maintain quarter-end debt to adjusted EBITDA (leverage ratio) and adjusted EBITDA to interest expense (interest expense coverage ratio) covenants based on the following ratios:

   
Interest Expense Coverage Ratio Covenant (Not Permitted to Be Less Than):
 
Leverage Ratio Covenant (Not Permitted to Be Greater Than):
Fiscal quarter ended March 31, 2010
 
1.50 to 1.0
 
7.25 to 1.0
Fiscal quarter ending June 30, 2010
 
2.00 to 1.0
 
5.50 to 1.0
Fiscal quarter ending September 30, 2010
 
2.50 to 1.0
 
4.75 to 1.0
Fiscal quarter ending December 31, 2010
 
3.00 to 1.0
 
3.75 to 1.0
Fiscal quarters ending March 31, 2011and June 30, 2011
 
3.00 to 1.0
 
3.50 to 1.0
All fiscal quarters ending thereafter
 
3.00 to 1.0
 
3.00 to 1.0

The Company was in compliance with its debt covenants and permitted capital expenditures as of March 31, 2010.

If the Company obtains a credit rating of BBB flat or better, the interest rates will immediately be reduced by 2.5 percentage points for all Senior Notes.  The Company will be required to make principal payments of $4,688 quarterly beginning December 29, 2011 for the 2015 Notes, principal payments of $3,125 quarterly beginning March 7, 2014 for the 2017 Notes A, and principal payments of $1,563 quarterly beginning March 7, 2014 for the 2017 Notes B.

Long-term debt matures as follows:

Years ending March 31
     
       
2011
  $ 234  
2012
    17,157  
2013
    19,041  
2014
    23,739  
2015
    32,902  
2016 & beyond
    43,113  

Modine also maintains credit agreements with foreign banks.  The foreign unused lines of credit in Asia, Europe and Brazil at March 31, 2010 were approximately $36,515.  Domestic unused lines of credit at March 31, 2010, were $130,601.  In aggregate, the Company had total available lines of credit of $167,116 at March 31, 2010.  The availability of these funds is subject to the Company’s ability to remain in compliance with the financial covenants and limitations in the respective debt agreements.

The fair value of long-term debt is estimated by discounting the future cash flows at rates offered to the Company for similar debt instruments of comparable maturities.  At March 31, 2010 and 2009, the carrying value of Modine's long-term debt approximated fair value, with the exception of the 2015 Notes, which has a fair value of approximately $64,047 and $62,835 at March 31, 2010 and 2009, respectively, and the 2017 Notes A and 2017 Notes B, which have a fair value of approximately $67,913 and $61,583 at March 31, 2010 and 2009, respectively.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

At March 31, 2010 and 2009, the Company had short-term debt of $3,011 and $5,036, respectively, primarily consisting of short-term borrowings at foreign locations.

Interest expense charged to earnings was as follows:

Years ending March 31
 
2010
   
2009
   
2008
 
                   
Gross interest cost
  $ 24,162     $ 14,697     $ 11,543  
Capitalized interest on major construction projects
    (1,274 )     (922 )     (473 )
Interest expense
  $ 22,888     $ 13,775     $ 11,070  

On May 10, 2010, Modine Holding GmbH and Modine Europe GmbH renegotiated the Credit Facility Agreement with Deutsche Bank AG.  The renegotiated credit facility has an available line of 15,000 euro ($19,182 U.S. equivalent), expires on May 9, 2012 and is secured by certain assets of Modine Holding GmbH and its subsidiaries.

Note 18:  Concentrations of credit risk/financial instruments

The Company invests excess cash in investment quality, short-term liquid debt instruments.  Such investments are made only in instruments issued by high quality institutions.  Financial instruments that potentially subject the Company to significant concentrations of credit risk consist principally of accounts receivable.  The Company sells a broad range of products that provide thermal solutions to a diverse group of customers operating throughout the world.  In fiscal 2010, 2009 and 2008, one customer accounted for ten percent or more of total Company sales.  Sales to the Company’s top ten customers were approximately 57 percent, 59 percent and 57 percent of total annual sales in fiscal 2010, 2009 and 2008, respectively.  At March 31, 2010, 2009 and 2008, approximately 47 percent, 43 percent and 51 percent, respectively, of the Company's trade accounts receivables were from the Company's top ten individual customers.  These customers operate primarily in the automotive, truck and heavy equipment markets and are influenced by many of the same market and general economic factors.  To reduce the credit risk, the Company performs periodic credit evaluations of each customer and actively monitors their financial condition and developing business news.  Collateral or advanced payments are generally not required, but may be used in those cases where a substantial credit risk is identified.  Credit losses to customers operating in the markets served by the Company have not been material.  Total bad debt write-offs for the periods presented have been below one percent of outstanding trade receivable balances at respective year-ends.  See Note 26 for future discussion on market, credit and counterparty risks.

In addition to the external borrowing, the Company has certain foreign-denominated long-term inter-company loans that are sensitive to foreign exchange rates.  The Company has inter-company loans outstanding at March 31, 2010 as follows:
 
 
·
$6,000 loan to its wholly owned subsidiary, Modine do Brasil Sistemas Termicos Ltda. (Modine Brazil), that matures on May 8, 2011;
 
 
·
$12,956 loan to its wholly owned subsidiary, Modine Thermal Systems India, that matures on April 30, 2013;
 
 
·
$12,000 between two loans to its wholly owned subsidiary, Modine Thermal Systems Co (Changzhou, China), with various maturity dates through June 2012;
 
 
·
$4,728 loan to its wholly owned subsidiary, Modine U.K. Dollar Limited, that matures on November 30, 2011; and
 
 
·
$45,371 between two loans to its wholly owned subsidiary, Modine Holding GmbH, with various maturity dates through January 31, 2020.
 
These inter-company loans are sensitive to movement in foreign exchange rates, and the Company does not have any derivative instruments that hedge this exposure at March 31, 2010.  In fiscal 2008, the Company entered into a zero cost collar to hedge the foreign exchange exposure on inter-company loans outstanding with Modine Brazil.  This collar was settled on March 31, 2008 for a loss of 3,896 reais ($2,279 U.S. equivalent).  In fiscal 2009, the Company entered into a purchase option contract to hedge the foreign exchange exposure on inter-company loans outstanding with Modine Brazil.  The Company settled this derivative instrument on February 11, 2009 for cash proceeds of $1,838.  These derivative instruments were not being treated as hedges, and accordingly, transaction gains or losses on the derivatives were recorded in other (income) expense – net in the consolidated statement of operations and acted to offset any currency movement on the outstanding loan receivable.
 

MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Note 19:  Derivative instruments

Modine uses derivative financial instruments in a limited way as a tool to manage certain financial risks.  Their use is restricted primarily to hedging assets and obligations already held by Modine, and they are used to protect cash flows rather than generate income or engage in speculative activity.  Leveraged derivatives are prohibited by Company policy.

Derivative financial instruments are required to be measured at fair value and recognized as assets or liabilities in the consolidated balance sheets.  Accounting for the gain or loss resulting from the change in the fair value of the derivative financial instruments depends on whether it has been designed, and is effective, as a hedge and, if so, on the nature of the hedging activity.

Commodity Derivatives: The Company enters into future contracts related to certain of the Company’s forecasted purchases of aluminum and natural gas.  The Company’s strategy in entering into these contracts is to reduce its exposure to changing purchase prices for future purchases of these commodities.  These contracts have been designated as cash flow hedges by the Company.  Accordingly, unrealized gains and losses on these contracts are deferred as a component of other comprehensive (loss) income, and recognized as a component of earnings at the same time that the underlying purchases of aluminum and natural gas impact earnings.  During the year ended March 31, 2010, the Company did not enter into any new futures contracts for commodities.

In addition, the Company has entered into futures contracts related to certain of the Company’s forecasted purchases of copper and nickel.  The Company’s strategy in entering into these contracts is to reduce its exposure to changing purchase prices for future purchases of these commodities.  The Company has not designated these contracts as hedges, therefore gains and losses on these contracts are recorded directly in the consolidated statements of operations.  During the year ended March 31, 2010, the Company did not enter into any new futures contracts.

Foreign exchange contracts: Modine maintains a foreign exchange risk management strategy that uses derivative financial instruments in a limited way to mitigate foreign currency exchange risk.  Modine periodically enters into foreign currency exchange contracts to hedge specific foreign currency denominated transactions.  Generally, these contracts have terms of 90 or fewer days.  The effect of this practice is to minimize the impact of foreign exchange rate movements on Modine’s earnings.  Modine’s foreign currency exchange contracts do not subject it to significant risk due to exchange rate movements because gains and losses on these contracts offset gains and losses on the assets and liabilities being hedged.

As of March 31, 2010 and 2009, the Company had no outstanding forward foreign exchange contracts.  Non-U.S. dollar financing transactions through inter-company loans or local borrowings in the corresponding currency generally are effective as hedges of long-term investments.

The Company has a number of investments in wholly owned foreign subsidiaries and non-consolidated foreign joint ventures.  The net assets of these subsidiaries are exposed to currency exchange rate volatility.  From time to time, the Company uses non-derivative financial instruments to hedge, or offset, this exposure.  As of March 31, 2010 and 2009, there were no outstanding foreign-denominated borrowings on the parent company’s balance sheet to offset this exposure.

Interest rate derivative: On August 5, 2005, the Company entered into a one-month forward ten-year treasury interest rate lock in anticipation of a private placement borrowing which occurred on September 29, 2005.  The contract was settled on September 1, 2005 with a loss of $1,794.  On October 25, 2006, the Company entered into two forward starting swaps in anticipation of the $75,000 private placement debt offering that occurred on December 7, 2006.  On November 14, 2006, the fixed interest rate of the private placement borrowing was locked and, accordingly, the Company terminated and settled the forward starting swaps at a loss of $1,812.  These interest rate derivatives were treated as cash flow hedges of forecasted transactions.  Accordingly, the losses are reflected as a component of accumulated other comprehensive (loss) income, and are being amortized to interest expense over the respective lives of the borrowings.  The Company amortized $462 of the interest rate derivatives in proportion with the mandatory prepayment of the senior notes on September 30, 2009.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The fair value of the derivative financial instruments recorded in the consolidated balance sheets as of March 31, 2010 and March 31, 2009 are as follows:

 
Balance Sheet Location
 
March 31, 2010
   
March 31, 2009
 
Derivative instruments designated as cash flow hedges:
             
Commodity derivatives
Accrued expenses and other current liabilities
  $ 1,243     $ 9,276  
                   
Derivatives not designated as hedges:
                 
Commodity derivatives
Accrued expenses and other current liabilities
  $ -     $ 683  

The amounts recorded in accumulated other comprehensive (loss) income (AOCI) and in the consolidated statement of operations for the year ended March 31, 2010 are as follows:

   
Amount of Loss Recognized in AOCI
 
Location of Loss Reclassified from
AOCI into Continuing Operations
 
Amount of Loss Reclassified from AOCI into Continuing Operations
 
Designated derivative instruments:
             
Commodity derivatives
  $ 2,020  
Cost of sales
  $ 5,945  
Interest rate derivative
    604  
Interest expense
    853  
Total
  $ 2,624       $ 6,798  
                   
         
Location of Loss (Gain)
Recognized in Income
 
Amount of Loss (Gain) Recognized in Income
 
Derivatives not designated:
                 
Commodity derivatives
       
Cost of sales
  $ -  
Foreign exchange contracts
       
Other expense (income)
    -  
Total
            $ -  

The amounts recorded in accumulated other comprehensive (loss) income (AOCI) and in the consolidated statement of operations for the year ended March 31, 2009 are as follows:


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

   
Amount of Loss Recognized in AOCI
 
Location of Loss Reclassified from
AOCI into Continuing Operations
 
Amount of Loss Reclassified from AOCI into Continuing Operations
 
Designated derivative instruments:
             
Commodity derivatives
  $ 10,053  
Cost of sales
  $ 4,511  
Interest rate derivative
    1,457  
Interest expense
    340  
Total
  $ 11,510       $ 4,851  
                   
         
Location of Loss (Gain)
Recognized in Income
 
Amount of Loss (Gain) Recognized in Income
 
Derivatives not designated:
                 
Commodity derivatives
       
Cost of sales
  $ 4,397  
Foreign exchange contracts
       
Other expense (income)
    (1,440 )
Total
            $ 2,957  

Note 20:  Fair value measurements

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants.  Fair value measurements are classified under the following hierarchy:

 
·
Level 1 – Quoted prices for identical instruments in active markets.
 
·
Level 2 – Quoted prices for similar instruments in active markets; quoted prices for identical or similar instruments in markets that are not active; and model-derived valuations in which all significant inputs or significant value-drivers are observable in active markets.
 
·
Level 3 – Model-derived valuations in which one or more significant inputs or significant value-drivers are unobservable.

When available, the Company used quoted market prices to determine fair value and classified such measurements within Level 1.  In some cases, where market prices are not available, the Company makes use of observable market-based inputs to calculate fair value, in which case the measurements are classified within Level 2.  If quoted or observable market prices are not available, fair value is based upon internally developed models that use, where possible, current market-based parameters such as interest rates, yield curves, currency rates, etc.  These measurements are classified within Level 3.

Fair value measurements are classified according to the lowest level input or value-driver that is significant to the valuation.  A measurement may therefore be classified within Level 3 even though there may be significant inputs that are readily observable.

Trading securities
The Company’s trading securities are a mix of various investments maintained in a deferred compensation trust to fund future obligations under Modine’s non-qualified deferred compensation plan.  The securities’ fair values are the market values from active markets (such as the New York Stock Exchange (NYSE)) and are classified within Level 1 of the valuation hierarchy.

Derivative financial instruments
As part of the Company’s risk management strategy, Modine enters into derivative transactions to mitigate certain identified exposures.  The derivative instruments include currency options and commodity derivatives.  These are not exchange traded and are customized over-the-counter derivative transactions.  These derivative exposures are with counterparties that have long-term credit ratings of BBB- or better.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The Company measures fair values assuming that the unit of account is an individual derivative transaction and that derivatives are sold or transferred on a stand-alone basis.  Therefore, derivative assets and liabilities are presented on a gross basis without consideration of master netting arrangements.  The Company estimates the fair value of these derivative instruments based on dealer quotes as the dealer is willing to settle at the quoted prices.  These derivative instruments are classified within Level 2 of the valuation hierarchy.

Deferred compensation obligation
The fair value of the deferred compensation obligation is recorded at the fair value of the investments held by the deferred compensation trust.  As noted above, the fair values are the market values directly from active markets (such as the NYSE) and are classified within Level 1 of the valuation hierarchy.

At March 31, 2010, the assets and liabilities that are measured at fair value on a recurring basis are classified as follows:

   
Level 1
   
Level 2
   
Level 3
   
Total Assets / Liabilities at Fair Value
 
Assets:
                       
Trading securities (short term investments)
  $ 1,239     $ -     $ -     $ 1,239  
Total assets
  $ 1,239     $ -     $ -     $ 1,239  
                                 
Liabilities:
                               
Derivative financial instruments
  $ -     $ (1,243 )   $ -     $ (1,243 )
Deferred compensation obligation
    (2,390 )     -       -       (2,390 )
Total liabilities
  $ (2,390 )   $ (1,243 )   $ -     $ (3,633 )
 
U.S. pension plan assets
At March 31, 2010, the U.S. pension plan assets are classified as follows:

   
Level 1
   
Level 2
   
Level 3
   
Total Assets
 
                         
Money market investments
  $ -     $ 5,368     $ -     $ 5,368  
Common stocks
    23,519       -       -       23,519  
Corporate bonds
    -       16,038       -       16,038  
Exchanged traded funds
    1,469       -       -       1,469  
Foreign bonds
    -       1,763       -       1,763  
Pooled equity funds
    60,750       7,502       -       68,252  
Pooled fixed income funds
    22,530       -       -       22,530  
U.S. government and agency securities
    -       15,309       -       15,309  
Other
    246       285       -       531  
Total U.S. pension plan assets
  $ 108,514     $ 46,265     $ -     $ 154,779  
 
The fair value of money market investments has been determined to approximate their net asset values, with no discounts for credit quality or liquidity restrictions and are classified within Level 2 of the valuation hierarchy.  The fair value of common stock, exchange traded funds, pooled equity funds and pooled fixed income funds are the market values from active markets (such as the NYSE) and are classified within Level 1 of the valuation hierarchy.  The fair value of corporate bonds, foreign bonds, pooled equity funds and U.S. government and agency securities are valued based upon recent bid prices or the average of recent bid and asking prices when available and, if not available, they are valued through matrix pricing models developed by sources considered by management to be reliable.  These are classified within Level 2 of the valuation hierarchy.  In addition to the above-listed pension plan assets, there was $389 of accrued interest and dividends included in the total plan assets.
 
Note 21:  Product warranties, guarantees and other commitments

Product warranties: Modine provides product warranties for its assorted product lines with warranty periods generally ranging from one to ten years, with the majority falling within a two to four year time period.  The Company accrues for estimated future warranty costs in the period in which the sale is recorded, and warranty expense estimates are forecasted based on the best information available using analytical and statistical analysis of both historical and current claim data.  These expenses are adjusted when it becomes probable that expected claims will differ from initial estimates recorded at the time of the sale.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Changes in the warranty liability were as follows:

Years ended March 31
 
2010
   
2009
 
             
Balance, April 1
  $ 9,107     $ 14,459  
Accruals for warranties issued in current period
    5,800       8,565  
Accruals (reversals) related to pre-existing warranties
    5,562       (1,921 )
Settlements made
    (7,937 )     (10,475 )
Effect of exchange rate changes
    594       (1,521 )
Balance, March 31
  $ 13,126     $ 9,107  

Indemnification agreements: From time to time, the Company provides indemnification agreements related to the sale or purchase of an entity or facility.  These indemnification agreements cover customary representations and warranties typically provided in conjunction with the transactions, including income, sales, excise or other tax matters, environmental matters and other third-party claims.  The indemnification periods provided generally range from less than one year to fifteen years.  The Company obtains insurance coverage for certain indemnification matters, as considered appropriate based on the nature of the indemnification matter or length of indemnification period.  The fair value of the Company’s outstanding indemnification obligations at March 31, 2010 is not material.

Commitments: At March 31, 2010, the Company had capital expenditure commitments of $29,578.  Significant commitments include tooling and equipment expenditures for new and renewal platforms with new and current customers in Europe and North America.  The Company utilizes consignment inventory arrangements with certain vendors in the normal course of business, whereby the suppliers maintain certain inventory stock at the Company's facilities or at other outside facilities.  In these cases, the Company has agreements with the vendor to use the material within a specific period of time.

Note 22:  Common and treasury stock

Following is a summary of common and treasury stock activity for the years ended March 31, 2008, 2009 and 2010:

   
Common stock
   
Treasury stock at cost
 
   
Shares
   
Amount
   
Shares
   
Amount
 
                         
Balance, March 31, 2007
    32,872     $ 20,545       (453 )   $ (12,468 )
Purchase of treasury stock
    -       -       (42 )     (835 )
Stock repurchase programs
    (250 )     (156 )     -       -  
Stock options and awards
    166       103       -       -  
Balance, March 31, 2008
    32,788       20,492       (495 )     (13,303 )
Purchase of treasury stock
    -       -       (54 )     (594 )
Stock options and awards
    2       2       -       -  
Balance, March 31, 2009
    32,790       20,494       (549 )     (13,897 )
Purchase of treasury stock
    -       -       (5 )     (25 )
Public offering
    13,800       8,625       -       -  
Stock options and awards
    225       141       -       -  
Balance, March 31, 2010
    46,815     $ 29,260       (554 )   $ (13,922 )

On September 30, 2009, the Company completed a public offering of 13,800 shares of its common stock at a price of $7.15 per share.  Cash proceeds were $92,858 after deducting underwriting discounts, commissions, legal, accounting and printing fees of $5,812.

The Company announced a common share repurchase program on May 18, 2005 approved by the Board of Directors which was a dual purpose program authorizing the repurchase of up to five percent of the Company’s outstanding common stock, as well as the indefinite buy-back of additional shares to offset dilution from Modine’s incentive stock plans.  The five percent portion of this program was completed in fiscal 2006.  During the year ended March 31, 2008, 250 shares were purchased under the anti-dilution portion of this program at an average cost of $27.48 per share, or a total of $6,870.  No shares were repurchased under the anti-dilution portion of this program during fiscal 2009 and 2010.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The repurchases under this program were made from time to time at then-current prices through solicited and unsolicited transactions in the open market or in privately negotiated or other transactions.  The Company has retired shares acquired pursuant to the programs, and the retired shares have been returned to the status of authorized but un-issued shares.

During fiscal 2010, 2009 and 2008, the Company repurchased 5, 54 and 42 shares of stock, respectively, for a cost of $25, $594 and $835, respectively.  The Company, pursuant to its equity compensation plans, gave participants the opportunity to deliver back to the Company the number of shares from the vesting of stock awards sufficient to satisfy the individual’s tax withholding obligations.  These shares are held as treasury shares.

The Company is prohibited from making future purchases of common stock under the First Amendment to Credit Agreement and Waiver with its primary lenders and the Waiver and Second Amendment to Note Purchase Agreements with the Senior Note holders entered into on February 17, 2009.

Note 23:  Accumulated other comprehensive (loss) income

Comprehensive (loss) income includes net (loss) earnings, foreign currency translation adjustments, the change in benefit plan adjustment and the effective portion of a cash flow hedge, net of tax that are currently presented as a component of shareholders’ equity.  The Company’s total comprehensive (loss) income was $(15,568), $(232,564) and $2,744 fiscal 2010, 2009 and 2008, respectively.

The components of accumulated other comprehensive (loss) income at year end were as follows:

March 31
 
2010
   
2009
 
             
Unrealized foreign currency translation adjustments
  $ 35,246     $ 12,355  
Net investment hedge adjustment
    5,626       5,626  
Net loss on derivative instruments designated as cash flow hedge, net of tax
    (2,624 )     (11,510 )
Defined benefit plans, net of tax
    (87,431 )     (69,365 )
Accumulated other comprehensive (loss) income
  $ (49,183 )   $ (62,894 )

From time to time, the Company has managed its currency exposure related to the net assets of Modine’s European subsidiaries through euro-denominated borrowings entered into by the parent.  During fiscal 2008, the Company recorded an adjustment to accumulated other comprehensive (loss) income of $5,626 to properly reflect the income tax ramifications of net losses related to the foreign-currency-denominated debt recorded in the cumulative translation adjustment over the past several fiscal years.  This adjustment was made during fiscal 2008 as it was deemed immaterial to the Company’s financial position for the previously reported periods.  This adjustment had no impact on the Company’s net (loss) earnings.

Note 24:  Stock purchase, option and award plans

The Company’s long-term stock-based incentive plans for employees consist of the following: (1) a discretionary stock option program for top managers and other key employees, and (2) a long-term incentive compensation program for officers and key executives that consists of a stock option component, retention restricted stock component and a performance stock component.  For fiscal 2008 and 2009, the performance component of the long-term incentive compensation program consisted of an earnings per share measure (weighted at 60 percent) based on a cumulative three-year period and a total shareholder return measure (weighted at 40 percent) compared to the performance of the S&P 500 (stock price change and dividends) over the same three year period.  In fiscal 2010, there was no performance component of the long-term incentive compensation program.

In addition to the long-term stock-based incentive plans for employees, stock options and stock awards may be granted to non-employee directors.  The Board or the Officer Nomination and Compensation Committee, as applicable, have the broad discretionary authority to set the terms of the awards of stock under the Company’s 2008 Incentive Compensation Plan.  Stock options expire no later than 10 years after the grant date and have an exercise price equal to the fair market value of the common stock on the date of the grant.  Unrestricted stock awards granted vest immediately.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The fulfillment of equity-based grants is currently being accomplished through the issuance of new common shares.  Under the Company’s 2008 Incentive Compensation Plan, 1,452 shares are available for the granting of additional options and awards at March 31, 2010.

Accounting guidance for stock-based compensation requires the cash flow resulting from the tax deductions in excess of the compensation cost recognized for stock-based incentive plans (excess tax benefits) to be classified as financing cash flows.  During fiscal 2008, $124 of excess tax benefits realized for the tax deductions from stock-based incentive plans was reversed as it was ultimately not realizable given the current U.S. tax loss situation.  As of March 31, 2010, $810 of carryforwards related to windfall tax benefits are available to be recorded in additional paid-in capital when realized.

Stock Options:  The fair value of the option awards is estimated on the date of grant using the Black-Scholes option valuation model with the following assumptions for stock options granted in fiscal 2010 and 2008:

   
2010
   
2008
 
Weighted average fair value of options
  $ 3.34     $ 3.21  
Risk-free interest rate
    3.19 %     2.97 %
Expected volatility of the Company's stock
    72.95 %     30.06 %
Expected dividend yield on the Company's stock
    0.00 %     3.17 %
Expected life of options - years
    6.1       6.1  
Expected pre-vesting forfeiture rate
    0 %     0 %

There were no stock option awards granted during fiscal 2009.

Stock options granted have an exercise price equal to the fair market value of the common stock on the date of grant.  The risk-free interest rate was based on yields of U.S. zero-coupon issues with a term equal to the expected life of the option for the week the options were granted.  The expected volatility assumption was derived by referring to changes in the Company’s historical common stock prices over the same time frame as the expected life of the awards.  Prior to fiscal 2010, the expected dividend yield of the stock was based on the Company’s historical dividend yield.  In fiscal 2010, the Company reduced the expected dividend yield to 0% as the Company is prohibited from paying dividends under its primary credit agreements.  The Company anticipates reinvesting its cash flows into the operations of the business over the expected life of the options.  The expected lives of the awards are based on historical patterns and the terms of the options.  All options granted in fiscal 2010 vest 25% at grant date and 25% annually thereafter for the next three years.  For fiscal 2008, the majority of the options awarded vested at grant, except for employees who had not completed one year of service which comprised a small portion of the overall grants.  A portion of the options granted in fiscal 2008 vested 25% at grant date and 25% annually thereafter for the next three years.  A pre-vesting forfeiture rate of zero was used for these periods as historical experience has indicated that employees seldom leave before completing the required service period.  

Compensation expense recorded in fiscal 2010, 2009 and 2008 related to stock options was $1,052, $72 and $1,065 respectively.  The total fair value of stock options vesting during the year ended March 31, 2010 was $1,927.  As of March 31, 2010, the total compensation expense not yet recognized related to non-vested stock options was $987 and the weighted average period in which the remaining expense is expected to be recognized is approximately 2.1 years.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

A summary of the stock option activity for the years ended March 31, 2010, 2009 and 2008 is as follows:

Years ended March 31
 
2010
   
2009
   
2008
 
   
Shares
   
Weighted average exercise price
   
Shares
   
Weighted average exercise price
   
Shares
   
Weighted average exercise price
 
                                     
Outstanding, April 1
    2,472     $ 24.51       2,672     $ 25.06       2,503     $ 27.46  
Granted
    666       5.01       -       -       417       13.57  
Exercised
    (48 )     5.18       (2 )     11.94       (37 )     18.93  
Forfeited or expired
    (433 )     24.04       (198 )     32.11       (211 )     31.95  
Outstanding, March 31
    2,657     $ 20.05       2,472     $ 24.51       2,672     $ 25.06  
                                                 
Exercisable, March 31
    2,237     $ 22.84       2,457     $ 24.58       2,635     $ 25.19  

The accompanying table summarizes information about stock options outstanding at March 31, 2010:

     
Options Outstanding
   
Options Exercisable
 
Range of exercise prices
   
Shares
   
Weighted average remaining contractual life (years)
   
Weighted average exercise price
   
Aggregate intrinsic value
   
Shares
   
Weighted average exercise price
   
Aggregate intrinsic value
 
$5.01 - $14.43       970       8.6     $ 8.50     $ 3,507       550     $ 11.05     $ 940  
$16.12 - $21.17       242       2.8       19.74       -       242       19.74       -  
$22.24 - $27.89       663       3.4       24.81       -       663       24.81       -  
$28.48 - $33.74       782       4.7       30.42       -       782       30.42       -  
$5.01 - $33.74       2,657       5.6     $ 20.05     $ 3,507       2,237     $ 22.84     $ 940  

The aggregate intrinsic value in the preceding table represents the pre-tax difference between the closing price of Modine common shares on the last trading day of fiscal 2010 over the exercise price of the stock option, multiplied by the number of options outstanding or exercisable.  The aggregate value shown is not recorded for financial statement purposes and the value will change based upon daily changes in the fair value of Modine’s common shares.

Additional information related to stock options exercised during the years ended March 31, 2010, 2009 and 2008 were as follows:

Years ended March 31
 
2010
   
2009
   
2008
 
                   
Intrinsic value of stock options exercised
  $ 297     $ 8     $ 310  
Proceeds from stock options exercised
  $ 250     $ 18     $ 701  
Tax benefits realized from non-qualified stock options and disqualified incentive stock option exercises
  $ -     $ -     $ -  


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Restricted Stock:  A summary of the restricted stock activity for the fiscal years ended March 31, 2010, 2009 and 2008 is as follows:

Years ended March 31
 
2010
   
2009
   
2008
 
   
Weighted average price
   
Shares subject to restrictions
   
Weighted average price
   
Shares subject to restrictions
   
Weighted average price
   
Shares subject to restrictions
 
Non-vested balance, April 1
  $ 20.98       91     $ 22.51       232     $ 27.71       301  
Granted
    5.45       208       14.64       17       15.38       129  
Vested
    13.09       (105 )     22.32       (144 )     25.22       (197 )
Forfeited
    11.12       (31 )     20.61       (14 )     27.22       (1 )
Non-vested balance, March 31
  $ 8.03       163     $ 20.98       91     $ 22.51       232  

At March 31, 2010, Modine had approximately $908 of total unrecognized compensation cost related to non-vested restricted stock.  The cost is expected to be recognized over a weighted average period of 2.4 years.  The amounts charged to operations using straight-line amortization in fiscal 2010, 2009 and 2008 were $1,399, $2,685, and $4,678, respectively.  Under the Company’s restricted award provisions, employees of foreign subsidiaries can immediately sell their shares once the shares vest.  There were no sales of restricted stock by employees of foreign subsidiaries in fiscal 2010 or fiscal 2009.  In fiscal 2008, $30 was recorded directly to compensation expense for sales of restricted stock by employees of foreign subsidiaries.

Retention restricted stock awards are granted at fair market value and vest annually over a period of four years.  Management has made an estimate (based upon historical rates) of expected forfeitures and is recognizing compensation costs for those restricted shares expected to vest.

Restricted Stock – Performance-Based Shares:  For fiscal 2008 and fiscal 2009, the performance portion of the restricted stock award program consisted of two performance measures - an earnings per share (EPS) measure and a Total Shareholder Return (TSR) measure.  Awards are earned based on the attainment of corporate financial goals over a three-year period and are paid at the end of that three-year performance period if the performance targets have been achieved.  A new performance period begins each fiscal year so multiple performance periods, with separate goals, operate simultaneously.  In fiscal 2010, there was no performance component of the long-term incentive compensation program.  Based upon current projections of probable attainment of the EPS portions of the performance award, there was no expense recorded relative to the EPS portion in fiscal 2009 and 2008.  During fiscal 2009, $458 of expense was reversed relative to the fiscal 2008 EPS portion of the performance awards based upon the assessment of probable attainment.  For the years ended March 31, 2010, 2009, and 2008, Modine recorded $274, $935, and $1,740, respectively, in compensation expense resulting from the TSR portion of the performance award.  Based upon performance calculations performed by management through March 31, 2010, no shares would be issued under the TSR portion of the performance goals.  If the TSR portion of the performance goals is not achieved at the end of each three year period, compensation expense recorded will not be reversed because awards with a market condition are recognized provided the requisite service period is fulfilled by the employees.  The fair value of the TSR portions of the award granted in fiscal 2009 and 2008 were estimated using a Monte Carlo valuation model.  The following table sets forth assumptions used to determine the fair value for each performance award:

   
May 2008 Grant
   
May 2007 Grant
 
             
Expected life of award - years
    3       3  
Risk-free interest rate
    2.68 %     4.96 %
Expected volatility of the Company's stock
    36.00 %     29.60 %
Expected dividend yield on the Company's stock
    2.50 %     2.88 %
Expected forfeiture rate
    1.50 %     1.50 %

At March 31, 2010, Modine had approximately $426 of total unrecognized compensation cost related to unvested performance-based restricted stock.  That cost is expected to be recognized over a weighted average period of 1.0 year.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Note 25:  Segment and geographic information

Modine’s product lines consist of heat-transfer components and systems.  Modine serves the vehicular; industrial; building heating, ventilating and air conditioning; and fuel cell original-equipment markets.  The Company has five reportable segments, as follows:

Original Equipment – Asia
Comprised of vehicular and industrial original equipment products in Asia.

Original Equipment – Europe
Comprised of vehicular and industrial original equipment products in Europe.

Original Equipment – North America
Comprised of vehicular and industrial original equipment products in North America and global fuel cell products.

South America
Comprised of vehicular and industrial original equipment products and aftermarket products in South America.

Commercial Products
Comprised of building heating, ventilating and air conditioning products throughout the world.

Each Modine segment is managed at the regional vice-president or managing director level and has separate financial results reviewed by the Company’s chief operating decision makers.  These results are used by management in evaluating the performance of each business segment, and in making decisions on the allocation of resources among the Company’s various businesses.  The segment results include certain allocations of Corporate selling, general and administrative expenses, and the significant accounting policies of the segments are the same as those of Modine as a whole.  In addition, the segment data is presented on a continuing operations basis, except where noted.

During the first quarter of fiscal 2010, the Company implemented certain management reporting changes resulting in the transfer of support department costs originally included in Corporate and administrative into the Original Equipment – North America segment.  During the second quarter of fiscal 2010, the Company implemented certain management reporting changes resulting in the realignment of the Fuel Cell segment into the Original Equipment – North America segment.  The previously reported results for the Original Equipment – North America segment have been retrospectively adjusted to reflect these changes.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

The following is a summary of net sales, earnings (loss) from continuing operations and total assets by segment:

Years ended March 31
 
2010
   
2009
   
2008
 
Sales :
                 
Original Equipment – Asia
  $ 32,231     $ 17,405     $ 14,984  
Original Equipment – Europe
    469,399       597,361       757,658  
Original Equipment – North America
    412,924       499,508       524,447  
South America
    117,640       136,415       136,933  
Commercial Products
    170,139       187,723       198,101  
Segment sales
    1,202,333       1,438,412       1,632,123  
Corporate and administrative
    2,791       3,166       3,955  
Eliminations
    (41,890 )     (32,864 )     (34,406 )
Sales from continuing operations
  $ 1,163,234     $ 1,408,714     $ 1,601,672  
                         
Operating earnings (loss):
                       
Original Equipment – Asia
  $ (4,792 )   $ (9,187 )   $ (6,489 )
Original Equipment – Europe
    22,956       (13,226 )     84,531  
Original Equipment – North America
    2,271       (36,359 )     (68,401 )
South America
    7,600       11,903       10,991  
Commercial Products
    20,538       14,468       8,785  
Segment earnings
    48,573       (32,401 )     29,417  
Corporate and administrative
    (41,839 )     (46,606 )     (43,440 )
Eliminations
    104       (115 )     80  
Other items not allocated to segments
    (17,304 )     (23,831 )     (2,676 )
Loss from continuing operations before income taxes
  $ (10,466 )   $ (102,953 )   $ (16,619 )

Inter-segment sales are accounted for based on an established markup over production costs.  Sales eliminations represent the elimination of inter-segment sales.  Operating loss for corporate and administrative includes certain research and development costs, legal, finance and other general corporate expenses.  It also includes a percentage of the central services costs not directly attributable to a reportable segment.  Other items not allocated to segments primarily include interest expense, interest income, foreign currency transaction gains/losses and equity in the earnings of non-consolidated affiliates.

Following is a summary of assets by segment:

March 31
 
2010
   
2009
 
Assets:
           
Original Equipment – Asia
  $ 62,952     $ 46,539  
Original Equipment – Europe
    362,202       338,819  
Original Equipment – North America
    216,933       222,336  
South America
    88,240       66,620  
Commercial Products
    78,545       75,967  
Corporate and administrative
    31,539       50,794  
Assets held for sale
    9,870       63,501  
Eliminations
    (10,029 )     (12,444 )
Total assets
  $ 840,252     $ 852,132  

Corporate assets include cash and cash equivalents, accounts and notes receivable, investments in affiliates, intangibles and significant long-lived assets.  Eliminations consist primarily of trade and other receivables and property, plant and equipment.  In fiscal 2010, the strengthening of the euro against the U.S. dollar increased the value of assets reported in the Original Equipment – Europe segment, from the year before, by approximately 2 percent.  Additionally, the value of the Brazil real strengthened and increased the value of assets reported in the South America segment by approximately 30 percent against the U.S. dollar.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Following is a summary of capital expenditures and depreciation and amortization expense by segment:

March 31
 
2010
   
2009
   
2008
 
Capital expenditures:
                 
Original Equipment – Asia
  $ 8,036     $ 16,047     $ 15,236  
Original Equipment – Europe
    36,640       54,485       35,892  
Original Equipment – North America
    12,919       25,949       25,064  
South America
    2,532       3,970       7,385  
Commercial Products
    1,871       2,157       1,595  
Corporate and administrative
    (1,922 )     -       6  
Capital expenditures - continuing operations
    60,076       102,608       85,178  
Capital expenditures - discontinued operations
    221       653       4,262  
Total capital expenditures
  $ 60,297     $ 103,261     $ 89,440  

March 31
 
2010
   
2009
   
2008
 
Depreciation and amortization expense:
                 
Original Equipment – Asia
  $ 2,435     $ 1,360     $ 385  
Original Equipment – Europe
    28,987       30,355       30,842  
Original Equipment – North America
    26,637       29,088       33,566  
South America
    3,689       3,702       3,983  
Commercial Products
    4,065       4,604       5,197  
Corporate and administrative
    11       172       304  
Eliminations
    (58 )     (81 )     (82 )
Depreciation and amortization expense - continuing operations
    65,766       69,200       74,195  
Depreciation and amortization expense - discontinued operations
    -       4,134       7,591  
Total depreciation and amortization expense
  $ 65,766     $ 73,334     $ 81,786  

Following is a summary of net sales by geographical area:

Years ended March 31
 
2010
   
2009
   
2008
 
Net sales by country:
                 
Brazil
  $ 115,862     $ 133,188     $ 134,841  
Germany
    293,077       365,234       488,170  
United States
    516,171       608,424       646,834  
Other
    238,124       301,868       331,827  
Total net sales
  $ 1,163,234     $ 1,408,714     $ 1,601,672  

Net sales are attributed to countries based on the location of the selling unit.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Following is a summary of long-lived assets by geographical area:

March 31
 
2010
   
2009
 
Long-lived assets:
           
Germany
  $ 151,729     $ 156,054  
United States
    127,572       165,841  
Other
    159,713       137,781  
Eliminations
    (514 )     (403 )
Long-lived assets
    438,500       459,273  
Assets held for sale
    9,870       34,328  
Total long-lived assets
  $ 448,370     $ 493,601  

Long-lived assets are primarily property, plant and equipment, but also include investments and other noncurrent assets.  Assets held for sale for fiscal 2010 includes certain facilities which the Company has closed or intends to close and is currently marketing for sale.  Assets held for sale for fiscal 2009 includes assets related to the South Korean business.  Eliminations are primarily inter-company sales of property, plant and equipment.

Following is a summary of net sales by product type:

Years ended March 31
 
2010
   
2009
   
2008
 
Modules/packages
  $ 378,443     $ 417,517     $ 466,090  
Oil coolers
    157,756       219,247       271,706  
Radiators
    153,515       225,348       249,793  
Building HVAC
    140,688       156,075       168,566  
Charge-air coolers
    95,381       131,668       140,892  
EGR coolers
    77,958       103,725       157,680  
Vehicular air conditioning
    45,176       54,884       67,533  
Other
    114,317       100,250       79,412  
Total net sales
  $ 1,163,234     $ 1,408,714     $ 1,601,672  

Note 26:  Contingencies and litigation

Market risk:  The Company sells a broad range of products that provide thermal solutions to a diverse group of customers operating primarily in the automotive, truck, heavy equipment and commercial heating and air conditioning markets.  The adverse events in the global financial and economic markets have created a significant downturn in the Company’s vehicular markets and to a lesser extent in its commercial heating and air conditioning markets.  The current economic uncertainty makes it difficult to predict future conditions in these markets.  A sustained economic downturn in any of these markets could have a material adverse effect on the future results of operations or the Company’s liquidity.  The Company is responding to these market conditions through its continued implementation of its four-point plan as follows:

 
·
Manufacturing realignment – aligning the manufacturing footprint to maximize asset utilization and improve the Company’s cost competitive position;
 
·
Portfolio rationalization – identifying products or businesses that should be divested or exited as they do not meet required financial metrics;
 
·
Selling, general and administrative expense reduction – reducing SG&A expenses and SG&A expenses as a percentage of sales through diligent cost containment actions; and
 
·
Capital allocation discipline – allocating capital spending to operating segments and business programs that will provide the highest return on investment.

Credit risk:  The adverse events in the global financial markets over the past two years have increased credit risks on investments to which Modine is exposed or where Modine has an interest.  The Company manages credit risks through its focus on the following:

 
·
Cash and investments – cash deposits and short-term investments are reviewed to ensure banks have credit ratings acceptable to the Company and that all short-term investments are maintained in secured or guaranteed instruments;


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

 
·
Pension assets – ensuring that investments within these plans provide appropriate diversification, monitoring of investment teams and ensuring that portfolio managers are adhering to the Company’s investment policies and directives, and ensuring that exposure to high risk securities and other similar assets is limited; and
 
·
Insurance – ensuring that insurance providers have acceptable financial ratings to the Company.

Counterparty risks:  The adverse events in the global financial and economic markets over the past two years have also increased counterparty risks.  The Company manages counterparty risks through its focus on the following:

 
·
Customers – performing thorough review of customer credit reports and accounts receivable aging reports by an internal credit committee;
 
·
Suppliers – implementation of a supplier risk management program and utilizing industry sources to identify and mitigate high risk situations; and
 
·
Derivatives – ensuring that counterparties to derivative instruments have acceptable credit ratings to the Company.

Environmental: At present, the United States Environmental Protection Agency (“USEPA”) has designated the Company as a potentially responsible party (“PRP”) for remediation of six sites with which the Company had involvement.  These sites include: Auburn Incinerator, Inc./Lake Calumet Cluster (Illinois), LWD, Inc. (Kentucky), Circle Environmental of Dawson (two sites: Dawson, GA and Terrell County, GA), Acme Hydraulics (Illinois), and a scrap metal site known as Chemetco (Illinois). These sites are not Company-owned and allegedly contain materials attributable to Modine from past operations.  The percentage of material allegedly attributable to Modine is relatively low.  Remediation of these sites is in various stages of administrative or judicial proceedings and includes recovery of past governmental costs and for future investigations and remedial actions.  Costs anticipated for the remedial settlement of these sites cannot be reasonably defined at this time; however those costs are not believed to be material and have not been accrued based upon Modine’s relatively small portion of contributed materials.  In addition, Modine is voluntarily participating in the care for an inactive landfill owned by the City of Trenton (Missouri).

The Company has also recorded other environmental investigation, cleanup and remediation expense accruals for certain facilities located in the United States, Brazil, and The Netherlands.  These expenditures generally relate to facilities where past operations followed practices and procedures that were considered acceptable under then existing regulations, or where the Company is a successor to the obligations of prior owners and current laws and regulations require investigative and/or remedial work to ensure sufficient environmental compliance.
 
Personal injury actions:  The Company, along with Rohm and Haas Company and Morton International, was named as a defendant in twenty-four separate personal injury actions that were filed in the Philadelphia Court of Common Pleas (“PCCP”), and in an alleged class action matter filed in the United States District Court, Eastern District of Pennsylvania.  The PCCP cases involved allegations of personal injury from exposure to solvents that were allegedly released to groundwater and air for an undetermined period of time.  The federal court action sought damages for medical monitoring and property value diminution for a class of residents of a community that were allegedly at risk for personal injuries as a result of exposure to this same allegedly contaminated groundwater and air.  The Company mediated these cases in December 2007 and settled both the PCCP cases and the class action.  The Company has been dismissed from the twenty-four PCCP cases with prejudice.  In August 2008, the federal court gave final approval to the settlement of the class action and the Company was dismissed with prejudice from that case.
 
In the normal course of business, the Company and its subsidiaries are named as defendants in various other lawsuits and enforcement proceedings by private parties, the Occupational Safety and Health Administration, the Environmental Protection Agency, other governmental agencies and others in which claims, such as personal injury, property damage, intellectual property or antitrust and trade regulation issues, are asserted against Modine.

If a loss arising from environmental and other litigation matters is probable and can reasonably be estimated, the Company records the amount of the estimated loss, or the minimum estimated liability when the loss is estimated using a range, and no point within the range is more likely than another.  The undiscounted reserves for these matters totaled $3,048 and $1,976 at March 31, 2010 and 2009, respectively.  The Company recorded charges of $1,487 and $380, net of insurance recoveries, for the years ended March 31, 2010 and 2009, respectively, in the statements of operations related to these matters.  Fiscal 2010 includes $911 which was recorded as a component of loss from discontinued operations.  Many of these matters are covered by various insurance policies; however, the Company does not record any insurance recoveries until these are realized or realizable.  As additional information becomes available, any potential liability related to these matters is assessed and the estimates are revised, if necessary.  Based on currently available information, Modine believes that the ultimate outcome of these matters, individually and in the aggregate, will not have a material adverse effect on the financial position or overall trends in results of operations.  However, these matters are subject to inherent uncertainties, and unfavorable outcomes could occur, including significant monetary damages.


MODINE MANUFACTURING COMPANY
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except per share amounts)

Employee agreements:  The Company has employment agreements with certain key employees that provide for compensation and certain other benefits.  The agreements also provide for other terms and conditions of employment including termination payments under certain specific circumstances such as a change in control, as defined in the agreements.  In the unlikely event that these agreements were all triggered simultaneously, the possible contingent payments that would be required under the employment contracts are estimated to be approximately $11,000 depending on incentive payment calculations and other factors which are not determinable until the actual event occurs.

Note 27:  Quarterly financial data (unaudited)

Quarterly financial data is summarized below for the fiscal years ended March 31, 2010 and 2009:

Fiscal 2010 quarters ended
 
June
   
Sept.
   
Dec.
   
March
 
                         
Net sales
  $ 253,632     $ 282,298     $ 302,390     $ 324,914  
Gross profit
    35,865       42,359       47,716       44,269  
(Loss) earnings from continuing operations (a)
    (5,642 )     (4,886 )     2,125       (11,895 )
Net (loss) earnings
    (14,503 )     (6,457 )     3,779       (12,098 )
(Loss) earnings from continuing operations per common share:
                               
Basic
  $ (0.18 )   $ (0.15 )   $ 0.05     $ (0.26 )
Diluted
    (0.18 )     (0.15 )     0.05       (0.26 )
Net (loss) earnings per common share:
                               
Basic
  $ (0.45 )   $ (0.19 )   $ 0.08     $ (0.26 )
Diluted
    (0.45 )     (0.19 )     0.08       (0.26 )
 
Fiscal 2009 quarters ended
 
June
   
Sept.
   
Dec.
   
March
 
                                 
Net sales
  $ 437,871     $ 390,487     $ 325,579     $ 254,777  
Gross profit
    72,851       52,630       37,906       23,647  
Earnings (loss) from continuing operations (b) (c)
    6,584       (12,907 )     (56,511 )     (40,763 )
Net earnings (loss)
    7,786       (13,225 )     (56,057 )     (47,116 )
Earnings (loss) from continuing operations per common share:
                               
Basic
  $ 0.20     $ (0.40 )   $ (1.76 )   $ (1.27 )
Diluted
  $ 0.20     $ (0.40 )   $ (1.76 )   $ (1.27 )
Net earnings (loss) per common share:
                               
Basic
  $ 0.24     $ (0.41 )   $ (1.75 )   $ (1.47 )
Diluted
  $ 0.24     $ (0.41 )   $ (1.75 )   $ (1.47 )

(a)           The 2nd quarter of fiscal 2010 includes $3,159 of income from the release of restructuring liabilities and long-lived impairment charges of $3,850.
(b)           The 3rd quarter of fiscal 2009 includes a goodwill impairment charge of $9,005, long-lived asset impairment charges of $18,337, and restructuring charges of $25,311.
(c)           The 4th quarter of fiscal 2009 includes long-lived asset impairment charges of $13,228.


Report of Independent Registered Public Accounting Firm

To Shareholders and Board of Directors of Modine Manufacturing Company:

In our opinion, the consolidated financial statements listed in the index appearing under Item 15(a)(1), present fairly, in all material respects, the financial position of Modine Manufacturing Company and its subsidiaries at March 31, 2010 and 2009, and the results of their operations and their cash flows for each of the three years in the period ended March 31, 2010 in conformity with accounting principles generally accepted in the United States of America.  In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements.  Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of March 31, 2010, based on criteria established in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these financial statements, for the financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management's Report on Internal Control over Financial Reporting appearing under item 9A.  Our responsibility is to express opinions on these financial statements and on the Company's internal control over financial reporting based on our integrated audits.  We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects.  Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation.  Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk.  Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.  A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 
/s/ PricewaterhouseCoopers LLP
PricewaterhouseCoopers LLP
Milwaukee, WI
June 10, 2010


ITEM 9.   CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

Not applicable.

ITEM 9A.  CONTROLS AND PROCEDURES.

Conclusion Regarding Disclosure Controls and Procedures

As of the end of the period covered by this Annual Report on Form 10-K, management of the Company, at the direction of the General Counsel and under the supervision, and with the participation, of the Company's President and Chief Executive Officer, evaluated the effectiveness of the Company's disclosure controls and procedures as defined in the Securities Exchange Act Rules 13a-15(e) and 15d-15(e), with the participation of the Company's management.  Based upon that evaluation, the President and Chief Executive Officer, who also serves as the Company’s Principal Financial Officer on an interim basis, has concluded that the design and operation of the Company's disclosure controls and procedures are effective.

Management’s Report on Internal Control Over Financial Reporting

The management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended.  The Company’s internal control over financial reporting is a process designed by, or under the supervision of, our President and Chief Executive Officer, to provide reasonable assurance regarding the reliability of its financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.  The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.  Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management, with the participation of the Company’s President and Chief Executive Officer, who also serves as the Company’s Principal Financial Officer on an interim basis, has assessed the effectiveness of the Company’s internal control over financial reporting as of March 31, 2010.  The assessment was based on criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in “Internal Control—Integrated Framework.”  Based on this assessment and the above referenced criteria, management concluded that, as of March 31, 2010, the Company’s internal control over financial reporting was effective.

The effectiveness of the Company’s internal control over financial reporting as of March 31, 2010 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which appears herein.

Changes in Internal Control Over Financial Reporting

During the fourth quarter of fiscal 2010, there was no change in Modine’s internal control over financial reporting that materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

ITEM 9B.   OTHER INFORMATION.

Omitted as not applicable.

PART III

ITEM 10.   DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

Directors.  The information appearing in the Company's Proxy Statement for the 2010 Annual Meeting of Shareholders to be held on July 22, 2010 (the “2010 Annual Meeting Proxy Statement”) under the caption “Election of Directors” is incorporated herein by reference.

Executive Officers.  Information in response to this Item appears under the caption "Executive Officers of the Registrant" in this Form 10-K.


Compliance with Section 16(a) of the Exchange Act. The information appearing in the 2010 Annual Meeting Proxy Statement under the caption “Section 16(a) Beneficial Ownership Reporting Compliance” is incorporated herein by reference.

Code of Ethics. The information appearing in the 2010 Annual Meeting Proxy Statement under the caption “Corporate Governance – Code of Ethics” is incorporated herein by reference.  The Company's Code of Ethics (labeled as the Code of Ethics and Business Conduct) is included on its website, www.modine.com (Investor Relations link).

Board Committee Charters.  The Board of Directors has approved charters for its Audit Committee, Officer Nomination and Compensation Committee, Corporate Governance and Nominating Committee and Technology Committee.  These charters are included on the Company’s website, www.modine.com (Investor Relations link).

Audit Committee Financial Expert. The information appearing in the 2010 Annual Meeting Proxy Statement under the caption “Roles of the Board's Committees: Audit Committee” is incorporated herein by reference.

Audit Committee Disclosure. The information appearing in the 2010 Annual Meeting Proxy Statement under the captions “Board Meetings and Committees” and “Roles of the Board's Committees: Audit Committee” is incorporated herein by reference.

Guidelines on Corporate Governance.  The Board of Directors has adopted the Guidelines on Corporate Governance.  The Company’s Guidelines on Corporate Governance are included on its website, www.modine.com (Investor Relations link).

Security Holder Recommendation of Board Nominees. The information appearing in the 2010 Annual Meeting Proxy Statement under the caption “Shareholder Nominations and Recommendations of Director Candidates” is incorporated herein by reference.

ITEM 11.   EXECUTIVE COMPENSATION.

The information appearing in the 2010 Annual Meeting Proxy Statement under the captions “Executive Compensation”; “Election of Directors – Compensation of Directors”, “Roles of the Board’s Committees: Officer Nomination and Compensation Committee: Compensation Committee Interlocks and Insider Participation”; and “Compensation Committee Report” is incorporated herein by reference.

ITEM 12.   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

The Company incorporates by reference the information relating to stock ownership under the caption “Security Ownership of Certain Beneficial Owners and Management”, and under the caption “Equity Compensation Plan Information,” in the 2010 Annual Meeting Proxy Statement.

ITEM 13.   CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

The Company incorporates by reference the information contained in the 2010 Annual Meeting Proxy Statement under the captions “Certain Relationships and Related Transactions” and “Director Independence.”

ITEM 14.   PRINCIPAL ACCOUNTANT FEES AND SERVICES.

The Company incorporates by reference the information contained in the 2010 Annual Meeting Proxy Statement under the caption “Independent Auditors’ Fees for Fiscal 2010 and 2009.”


PART IV

ITEM 15.   EXHIBITS AND FINANCIAL STATEMENT SCHEDULES.

(a)   Documents Filed.  The following documents are filed as part of this Report:

   
Page in Form 10-K
     
1. The consolidated financial statements of Modine Manufacturing Company and its subsidiaries filed under Item 8:
   
     
Consolidated Statements of Operations for the years ended March 31, 2010, 2009 and 2008
 
47
Consolidated Balance Sheets at March 31, 2010 and 2009
 
48
Consolidated Statements of Cash Flows for the years ended March 31, 2010, 2009 and 2008
 
49
Consolidated Statements of Shareholders' Equity and Comprehensive Income (Loss) for the years ended March 31, 2010, 2009 and 2008
 
50
Notes to Consolidated Financial Statements30 - 46
 
51-90
Report of Independent Registered Public Accounting Firm46
 
91
     
2. Financial Statement Schedules.
   
     
The following financial statement schedule should be read in conjunction with the consolidated financial statements set forth in Item 8:
   
Schedule II -- Valuation and Qualifying Accounts
 
96
     
Schedules other than those listed above are omitted because they are not applicable, not required, or because the required information is included in the consolidated financial statements and the notes thereto.
   
     
3.  Exhibits and Exhibit Index.
 
97-100
     
See the Exhibit Index included as the last part of this report, which is incorporated herein by reference.  Each management contract and compensatory plan or arrangement required to be filed as an exhibit to this report is identified in the Exhibit Index by an asterisk following its exhibit number.
   

 
SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Date: June 9, 2010
Modine Manufacturing Company
 
By: /s/ Thomas A. Burke
      Thomas A. Burke, President
      and Chief Executive Officer
      (Principal Executive and Financial Officer)
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated.

­/s/ Thomas A. Burke
Thomas A. Burke
President, Chief Executive Officer and Director
(Principal Executive and Financial Officer)
 
June 9, 2010
 
   
/s/ Gary L. Neale
Gary L. Neale
Director
 
June 9, 2010
 
   
_____________________
David J. Anderson
Director
 
   
/s/ Charles P. Cooley
Charles P. Cooley
Director
 
June 7, 2010
 
   
/s/ Frank P. Incropera
Frank P. Incropera
Director
 
June 7, 2010
 
   
/s/ Frank W. Jones
Frank W. Jones
Director
 
June 7, 2010

/s/ Dennis J. Kuester
Dennis J. Kuester
Director
 
June 7, 2010
 
   
/s/ Vincent L. Martin
Vincent L. Martin
Director
 
June 7, 2010
 
   
/s/ Larry O. Moore
Larry O. Moore
Director
 
June 7, 2010
 
   
_____________________
Christopher W. Patterson
Director
 
   
/s/ Marsha C. Williams
Marsha C. Williams
Director
 
June 7, 2010
 
   
/s/ Michael T. Yonker
Michael T. Yonker
Director
 
June 7, 2010
 
 

MODINE MANUFACTURING COMPANY AND SUBSIDIARIES
(A Wisconsin Corporation)

SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
for the years ended March 31, 2010, 2009 and 2008
($ In Thousands)

Column A
 
Column B
   
Column C
   
Column D
   
Column E
 
         
Additions
             
          (1)     (2)              
Description
 
Balance at Beginning of Period
   
Charged (Benefit) to Costs and Expenses
   
Charged to Other Accounts
   
Deductions
   
Balance at End of Period
 
                                   
2010: Allowance for Doubtful Accounts
  $ 2,831     $ (8 )   $ 193
(B)
  $ 596
(A)
  $ 2,420  
Valuation Allowance for Deferred Tax Assets
  $ 104,471     $ 10,119     $ 3,226
(B)
  $ -     $ 117,816  
                                         
2009: Allowance for Doubtful Accounts
  $ 2,218     $ 1,856     $ (238
)(B)
  $ 1,005
(A)
  $ 2,831  
Valuation Allowance for Deferred Tax Assets
  $ 59,391     $ 33,004     $ 12,076
(B)
  $ -     $ 104,471  
                                         
2008: Allowance for Doubtful Accounts
  $ 1,511     $ 844     $ 309
(B)
  $ 446
(A)
  $ 2,218  
Valuation Allowance for Deferred Tax Assets
  $ 1,139     $ 57,917     $ 335
(B)
  $ -     $ 59,391  


Notes:
 
(A)
Bad debts charged off during the year
 
(B)
Translation and other adjustments


MODINE MANUFACTURING COMPANY
(THE “REGISTRANT”)
(COMMISSION FILE NO. 1-1373)

EXHIBIT INDEX
TO
2010 ANNUAL REPORT ON FORM 10-K

Exhibit No.
 
Description
 
Incorporated Herein By Referenced To
 
Filed Herewith
             
3.1
 
Amended and Restated Articles of Incorporation, as amended.
 
Exhibit 4.2 to Registrant’s Registration Statement on Form S-3 (333-161030) dated August 4, 2009 (“Form S-3”).
   
             
3.2
 
Bylaws, as amended.
 
Exhibit 3.1 to Registrant’s Current Report on Form 8-K dated May 25, 2010.
   
             
4.1
 
Form of Stock Certificate of the Registrant.
 
Exhibit 4(a) to Form 10-K for the fiscal year ended March 31, 2003 ("2003 10-K").
   
             
4.2
 
Amended and Restated Articles of Incorporation, as amended.
 
See Exhibit 3.1 hereto.
   
             
4.3
 
Note Purchase Agreement, dated as of September 29, 2005, among the Registrant and the Purchasers for the issuance and sale by the Registrant of 4.91% Senior Notes due September 29, 2015 in an aggregate principal amount of $75,000,000 (the “2005 Note Purchase Agreement”).
 
Exhibit 10.1 to Registrant’s Current Report on Form 8-K dated September 29, 2005.
   
             
4.4
 
Waiver letter, dated December 11, 2007, relating to 4.91% Senior Notes due September 29, 2015.
 
Exhibit 10.1 to Registrant’s Current Report on Form 8-K dated
December 11, 2007.
   
             
4.5
 
First Amendment, dated as of February 1, 2008, to the 2005 Note Purchase Agreement.
 
Exhibit 10.3 to Registrant’s Current Report on Form 8-K dated February 1, 2008 (“February 1, 2008 8-K”).
   
             
4.6
 
Waiver and Second Amendment, dated as of February 17, 2009, to the 2005 Note Purchase Agreement.
 
Exhibit 10.3 to Registrant’s Current Report on Form 8-K dated February 17, 2009 (“February 17, 2009 8-K”).
   
             
4.7
 
Waiver and Third Amendment, dated as of September 15, 2009, to the 2005 Note Purchase Agreement.
 
Exhibit 10.3 to Registrant’s Current Report on Form 8-K dated September 15, 2009 (“September 15, 2009 8-K”).
   
             
4.8
 
Fourth Amendment, dated as of September 18, 2009, to the 2005 Note Purchase Agreement.
 
Exhibit 10.6 to September 15, 2009 8-K.
   
             
4.9
 
Fifth Amendment, dated as of December 21, 2009, to the 2005 Note Purchase Agreement.
 
Exhibit 10.3 to Registrant’s Current Report on Form 8-K dated December 21, 2009 (“December 21, 2009 8-K”).
   
             
4.10
 
Note Purchase Agreement among the Registrant and the Purchasers for the issuance and sale by the Registrant of 5.68% Senior Notes Series A due December 7, 2017 and Series B due December 7, 2018 in an aggregate principal amount of $75,000,000 (the “2006 Note Purchase Agreement”).
 
Exhibit 10.1 to Registrant’s Current Report on Form 8-K dated December 7, 2006.
   


4.11
 
First Amendment, dated as of February 1, 2008, to the 2006 Note Purchase Agreement.
 
Exhibit 10.2 to February 1, 2008 8-K.
   
             
4.12
 
Waiver and Second Amendment, dated as of February 17, 2009, to the 2006 Note Purchase Agreement.
 
Exhibit 10.2 to February 17, 2009 8-K.
   
             
4.13
 
Waiver and Third Amendment, dated as of September 15, 2009, to the 2006 Note Purchase Agreement.
 
Exhibit 10.2 to September 15, 2009 8-K.
   
             
4.14
 
Fourth Amendment, dated as of September 18, 2009, to the 2006 Note Purchase Agreement.
 
Exhibit 10.5 to September 15, 2009 8-K.
   
             
4.15
 
Fifth Amendment, dated as of December 21, 2009, to the 2006 Note Purchase Agreement.
 
Exhibit 10.2 to December 21, 2009 8-K.
   
             
4.16
 
Amended and Restated Credit Agreement dated as of July 18, 2008 among the Registrant, the Foreign Subsidiary Borrowers, JPMorgan Chase Bank, N.A. as Swing Line Lender, as LC Issuer and as Agent and Bank of America, N.A., M&I Marshall & Ilsley Bank, Wells Fargo Bank, N.A., Dresdner Bank AG, U.S. Bank, National Association and Comerica Bank (the “Amended and Restated Credit Agreement”).
 
Exhibit 10.1 to Registrant’s Current Report on Form 8-K dated July 17, 2008 (“July 17, 2008 8-K”).
   
             
4.17
 
First Amendment and Waiver dated as of February 17, 2009 of the Amended and Restated Credit Agreement.
 
Exhibit 10.1 to February 17, 2009 8-K.
   
             
4.18
 
Second Amendment dated as of September 15, 2009 of the Amended and Restated Credit Agreement.
 
Exhibit 10.1 to September 15, 2009 8-K.
   
             
4.19
 
Third Amendment dated as of September 18, 2009 of the Amended and Restated Credit Agreement.
 
Exhibit 10.4 to September 15, 2009 8-K.
   
             
4.20
 
Fourth Amendment, dated as of December 21, 2009, to Amended and Restated Credit Agreement.
 
Exhibit 10.1 to December 21, 2009 8-K
   
             
4.21
 
Collateral Agency and Intercreditor Agreement dated as of February 17, 2009 among the Bank of America, N.A., M&I Marshall & Ilsley Bank, Wells Fargo Bank, N.A., Dresdner Bank AG (Commerzbank AG), U.S. Bank, National Association and Comerica Bank, the holders of 5.68% Senior Notes Series A due December 7, 2017 and Series B due December 7, 2018 and the holders of 4.91% Senior Notes due September 29, 2015 and JPMorgan Chase Bank (the “Intercreditor Agreement”).
 
Exhibit 10.5 to Registrant’s Form 10-Q for the quarter ended December 31, 2009 (“Fiscal 2010 Third Quarter 10-Q”).
   
             
4.22
 
First Amendment, dated as of September 18, 2009, to Intercreditor Agreement.
 
Exhibit 10.6 to Fiscal 2010 Third Quarter 10-Q.
   
             
4.23
 
Credit Facility Agreement among Modine Holding GmbH, Modine Europe GmbH and Deutsche Bank AG dated as of May 15, 2009.
 
Exhibit 10.2 to Registrant’s Form 10-Q for the quarter ended June 30, 2009 (“Fiscal 2010 First Quarter 10-Q”).
   
             
4.24
 
Form of Senior Indenture.
 
Exhibit 4.6 to Form S.3.
   
             
4.25
 
Form of Subordinated Indenture.
 
Exhibit 4.7 to Form S-3.
   


10.1*
 
Director Emeritus Retirement Plan effective April 1, 1992 (and frozen as of July 1, 2000).
 
Exhibit 10(a) to Registrant’s Form 10-K for the fiscal year ended March 31, 2002 (“2002 10-K”).
   
             
10.2*
 
Employment Agreement between the Registrant and Thomas A. Burke dated as of June 15, 2007.
 
Exhibit 10.3 to Registrant’s Current Report on Form 8-K dated June 15, 2007 8-K (“June 15, 2007 8-K”).
   
             
10.3*
 
Form of Amendment No. 1 to Employment Agreement entered into as of July 1, 2008 with Thomas A. Burke.
 
Exhibit 10.1 to Registrant’s Current Report on Form 8-K dated July 1, 2008.
   
             
10.4*
 
Form of Change in Control and Termination Agreement (amended and restated) between the Registrant and officers other than Thomas A. Burke.
 
Exhibit 10(f) to Registrant’s Form 10-K for the year ended March 31, 2004 (“2004 10-K”).
   
             
10.5*
 
Employment Agreement, dated April 25, 2009, between Modine Holding GmbH and Klaus Feldmann.
 
Exhibit 10.1 to Fiscal 2010 First Quarter 10-Q.
   
             
10.6*
 
2000 Stock Incentive Plan for Non-Employee Directors (Amended and Restated as of March 16, 2005).
 
Appendix A to Registrant’s Proxy Statement for the 2005 Annual Meeting dated June 15, 2005.
   
             
10.7*
 
Executive Supplemental Retirement Plan (as amended).
 
Exhibit 10(f) to Registrant's Form 10-K for the fiscal year ended March 31, 2000 ("2000 10-K").
   
             
10.8*
 
Deferred Compensation Plan (as amended).
 
Exhibit 10(y) to 2003 10-K.
   
             
10.9*
 
1994 Incentive Compensation Plan (as amended).
 
Exhibit 10(o) to 2002 10-K.
   
             
10.10*
 
Form of Incentive and Non-Qualified Stock Option Agreements.***
 
Exhibit 10(q) to Registrant’s Form 10-K for the fiscal year ended March 31, 2001 (“200110-K”).
   
             
10.11*
 
1994 Stock Option Plan for Non-Employee Directors (as amended).
 
Exhibit 10(p) to 2002 10-K.
   
             
10.12*
 
Form of Stock Option Agreement (for 1994 Stock Option Plan for Non-Employee Directors).
 
Exhibit 10(l) to 2000 10-K.
   
             
10.13*
 
2000 Stock Option Plan for Non-Employee Directors.
 
Exhibit 10(ac) to 2001 10-K.
   
             
10.14*
 
Form of Director's Stock Option Agreement (for 2000 Stock Option Plan for Non-Employee Directors).
 
Exhibit 10(ad) to 200110-K.
   
             
10.15*
 
Stock-Based Compensation Plan for Thermacore Employees under the DTX Corporation 1997 Plan.
 
Exhibit 10(af) to 2001 10-K.
   
             
10.16*
 
Form of Stock Option Agreement pertaining to Stock Option and Stock-Based Compensation Plan for Thermacore Employees.
 
Exhibit 10(ag) to 2001 10-K.
   
             
10.17*
 
2002 Incentive Compensation Plan.
 
Exhibit A to the Registrant's Proxy Statement dated June 7, 2002.
   
             
10.18*
 
Board of Directors Deferred Compensation Plan.
 
Exhibit 10(eee) to 2003 10-K.
   
             
10.19*
 
Form of Stock Award Plan.****
 
Exhibit 10(p) to 2001 10-K.
   
             
10.20*
 
Description of the Registrant’s Management Compensation Program.
 
Exhibit 10(w) to Registrant’s Form 10-K for the fiscal year ended March 31, 2005.
   


10.21*
 
2008 Incentive Compensation Plan.
 
Exhibit 10.2 to July 17, 2008 8-K.
   
             
10.22
 
Form of Equity Transfer Agreement between the Registrant and each of Anhui Jianghuai Modine Climate Control Co., Ltd. and SongZ Automobile Air Conditioning Co., Ltd. dated as of May 27, 2009.
 
Exhibit 10.3 to Fiscal 2010 First Quarter 10-Q.
   
             
10.23
 
Underwriting Agreement, dated September 24, 2009, between Modine Manufacturing Company and J.P. Morgan Securities Inc., as representative of the several underwriters named therein.
 
Exhibit 1.1 to Registrant’s Current Report on Form 8-K dated September 24, 2009.
   
             
10.24
 
Share Purchase Agreement dated as of December 4, 2009 by and between the Registrant and KB Synthetics Company Limited.
 
Exhibit 10.1 to Registrant’s Current Report on Form 8-K dated December 4, 2009.
   
             
 
List of subsidiaries of the Registrant.
     
X
             
 
Consent of independent registered public accounting firm.
     
X
             
 
Certification of Thomas A. Burke, Chief Executive Officer, pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (Principal Executive Officer and Principal Financial Officer).
     
X
             
 
Certification of Thomas A. Burke, Chief Executive Officer, pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (Principal Executive Officer and Principal Financial Officer).
     
X

*
Denotes management contract or executive compensation plan or arrangement required to be filed as an exhibit pursuant to Item 15 of Form 10-K.

**
Pursuant to Item 601(b)(4)(iii)(A) of Regulation S-K, the Registrant has omitted certain agreements with respect to long-term debt not exceeding 10% of consolidated total assets.  The Registrant agrees to furnish a copy of any such agreements to the Securities and Exchange Commission upon request.

***
Each year the Company enters into Stock Option Agreements, the terms of which are not materially different from the form agreement included herewith.

****
Each year the Company enters into a Stock Award Plan, the terms of which are not materially different from the form agreement included herewith.
 
 
100