Back to GetFilings.com

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended November 30, 2003

Commission file number 000-25349

HOOKER FURNITURE CORPORATION

(Exact name of registrant as specified in its charter)

440 East Commonwealth Boulevard, Martinsville, VA 24112

(Address of principal executive offices, Zip Code)

(276) 632-0459

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

None

Securities registered pursuant to Section 12(g) of the Act:

Common stock, no par value

(Title of class)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days:    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Act).    Yes  x    No  ¨

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter: $84.1 million.

Indicate the number of shares outstanding of each of the registrant’s classes of common stock as of February 12, 2004:

Documents incorporated by reference: Portions of the registrant’s definitive Proxy Statement for its Annual Meeting of Shareholders scheduled to be held March 30, 2004 are incorporated by reference into Part III.

Table of Contents

Hooker Furniture Corporation

TABLE OF CONTENTS

2

Table of Contents

Hooker Furniture Corporation

Part I

ITEM 1. BUSINESS

General

Incorporated in Virginia in 1924, Hooker Furniture Corporation (the “Company”) is a leading manufacturer and importer of wood furniture products, primarily targeted at the upper-medium price range, and upholstered furniture products targeted at the upper-medium to high-end price niches. The Company’s wood furniture consists of wall and entertainment systems, home office, occasional, dining and bedroom residential furniture. The Company, through a wholly owned subsidiary, acquired substantially all of the assets of Cherryville, N.C.-based leather seating specialist Bradington-Young, LLC, on January 2, 2003, expanding its product line to include a broad offering of residential upholstered furniture products. The Company conducts its upholstery operation under the Bradington-Young name and specializes in upscale leather reclining chairs, executive desk chairs and motion and stationary upholstery products.

With the addition of upholstered furniture products, the Company believes it has established itself as a comprehensive resource for retailers by offering furniture products for virtually every room of the home. Its extensive style selections within each of its product categories make the Company an important furniture resource for retailers in its price ranges. The Company has established a broad distribution network that includes independent furniture stores, department stores, specialty retailers, catalog merchandisers, and national and regional furniture chains. By emphasizing continuous improvement in its manufacturing processes, the Company offers competitive advantages to its customers such as quick delivery, reduced inventory investment, high quality and value. The Company operates production facilities in Cherryville, Hickory, Pleasant Garden, Maiden, and Woodleaf, North Carolina and Martinsville and Roanoke, Virginia.

Over the three-year period ended November 30, 2003, the Company has operated in a sluggish economy impacted by low levels of consumer confidence. Additionally, the Company’s results of operations were affected in two opposing ways by lower-priced imported furniture products. First, the Company’s domestic wood furniture manufacturing operations have suffered from lower demand and significant declines in volume for its bedroom, home office and home entertainment products. These declines led to the downsizing of its Martinsville, Va. bedroom facility in 2001, the closing of its Kernersville facility in 2003 and continuing short work schedules at its manufacturing facilities over most of the 2001 to 2003 time period. Second, the Company’s imported wood furniture operations have experienced significant growth over this three-year period, with increased demand for its occasional and dining furniture, designer sink cabinets and selective home office and home entertainment offerings. The Company’s entry into the container direct business has also fueled the dramatic growth of its import business. The Company’s Container Direct Program allows larger retailers to purchase full containers of imported product at attractive pricing with expedited delivery from the Company’s offshore suppliers directly to retailers.

Products and Styles

The Company’s product lines cover most major design categories. The Company believes that the diversity of its product lines enables it to anticipate and respond quickly to changing consumer preferences, and offers retailers a comprehensive furniture resource in the upper-medium price range. The Company intends to continue expanding each of its product lines. The Company believes that its products represent good value and that the quality and style of its furniture compare favorably with more premium-priced products.

The Company offers furniture products in a variety of materials, woods, veneers, finishes, leathers and silhouettes. The percentages of net sales provided by each major category for the last three fiscal years are as follows:

These product lines cover most major design categories including European traditional, transitional, American traditional, country/casual/cottage and young urban lifestyle designs.

The Company designs and develops new product styles semi-annually to replace discontinued styles and, if desired, to expand its product lines. The Company’s product design process begins with the marketing team identifying customer needs and conceptualizing product ideas. Product ideas often consist of a group or collection of furniture pieces related by their style, finish, leather or fabric covering and/or shape and size. A variety of sketches are produced, usually by independent designers, from which prototype furniture pieces are built. The Company invites certain dealers and independent sales representatives to view and critique the prototypes. Based on this input, the Company may modify the designs. Then, the Company’s engineering department prepares a sample for actual full-scale production. The Company generally introduces its new product styles at the fall and spring International Home Furnishings Market in High Point, North Carolina.

3

Table of Contents

Throughout 2003, the Company seized the opportunity presented by the new types and sizes of televisions and other consumer electronics products by developing new formats for entertainment centers and home theater wall units. While the Company is offering a variety of solutions for all the television formats, perhaps the most exciting is its line of “motion case goods” – consoles, wall units and a bookcase credenza for storing and displaying plasma televisions. In these plasma TV “hideaway” or “pop-up” products, the plasma TV is hidden within a lift mechanism inside the furniture and is lifted to the surface for viewing at the touch of a remote control button. Another innovation in home entertainment that has energized the Company’s home theater business is a patent-pending design that allows the end-user to conceal a big-screen television behind pocket doors.

In the home office category, the Company continued to innovate its product offerings in 2003 by designing modular work stations especially scaled to accommodate lap-top or notebook computers, which are rapidly growing in popularity compared to desk top computers. The Company also expanded its new offerings in imported products by expanding its casual dining category and entering several new product categories. These included the categories of exposed wood occasional chairs and free-standing bar units with coordinating bar stools. In addition, Bradington-Young expanded its product line in both style and price, offering more competitive, medium-level pricing along with its foundational niche of upper and upper-medium prices. The Company’s creative product development team has also originated styles in the upholstery marketplace, offering fresh and unique looks that capture the attention of retailers and consumers.

During 2002, the Company expanded its offerings into new wood furniture product categories. The Company introduced new bedroom offerings scaled for the second and third bedrooms of homes, as well as for vacation homes and condominiums. Additionally, there were a number of wood furniture product innovations in the home entertainment and home office product lines, many of which addressed style and price point voids in the line and targeted younger consumers. These innovations included the development of low profile corner entertainment centers and corner computer cabinets designed to be highly functional and conserve space within the home. The Company also introduced new imported wood furniture products in its casual dining category and a new, innovative product niche: a collection of ready-to-install designer sink cabinets.

From time to time, the Company will partner with third parties to design and market products under mutually beneficial licensing agreements. During 2001, the Company began working with professional golf tournament sponsor The PGA TOUR^®, to develop a line of furniture to be marketed under the “PGA TOUR^® Home Collection by Hooker Furniture” name. The Company has introduced products for this collection during 2001, 2002 and 2003.

Distribution

The general marketing practice followed in the furniture industry is to exhibit products at international and regional furniture markets. In the spring and fall of each year, a nine-day furniture market is held in High Point, North Carolina, which is attended by most retail buyers and is regarded by the industry as the international market. The Company utilizes 107,000 square feet of showroom space at the High Point market to introduce new products, increase sales of its existing products, and test ideas for future products for both its wood and upholstered furniture lines.

The Company has developed a broad domestic customer base and also sells to a limited international market. The Company sells its furniture through over 100 independent sales representatives to independent furniture retailers such as Gabberts of Minneapolis and Dallas, Kittles of Indianapolis, Nebraska Furniture Mart and Louis Shanks of Texas, catalog merchandisers such as the Horchow Collection (a unit of Neiman Marcus), national chain stores such as Z Gallerie, regional chain stores such as Raymour & Flannigan and Robb & Stucky and department stores such as Federated and Dillard’s. The Company believes this broad network reduces its exposure to regional recessions, and allows it to capitalize on emerging channels of distribution.

The Company offers tailored merchandising programs to address each channel of distribution. One of the most important developments in 2003 for imported wood furniture products was the April introduction of a retail boutique program called Seven Seas Treasures. As of the end of the fiscal year, over 250 stores have dedicated 800 to 1,000 square feet of store space to display the Company’s line of imported upscale, functional accents, including tables and chests, carved writing desks, casual dining and hand-painted furniture. Another key development in the area of distribution occurred in 2003, when the Company merged its Hooker and Bradington-Young sales forces, bringing the number of professional sales representatives selling Bradington-Young product from 24 to over 100. This integration has resulted in the addition of several hundred new retail accounts carrying the upholstery line. The Company believes that its upholstery operation is poised for strong growth in the future and is well positioned to leverage additional opportunities for synergy in merchandising and marketing.

The Company sold to nearly 5,000 customers during the past fiscal year. Approximately 2% of the Company’s sales in 2003 were to international customers. No single customer accounted for more than 3% of the Company’s sales in 2003. No material part of the Company’s business is dependent upon a single customer, the loss of which would have a material effect on the business of the Company. However, the loss of several of the Company’s major customers could have a material impact on the business of the Company.

The Company schedules production of domestically produced wood furniture and purchases imported wood furniture based upon actual and anticipated orders. The Company strives to provide domestically produced wood furniture on-demand for its dealers. During 2003, the Company shipped 85% of domestic wood product orders and 79% of import product orders within 30 days of order receipt.

Upholstered product orders are predominantly custom built after the order is received. The processing time for upholstered furniture averages approximately five to seven weeks from the time the order is received until it is available to ship.

4

Table of Contents

The Company’s backlog of unshipped orders for all of its products amounted to $46.2 million as of November 30, 2003 and $35.6 million as of November 30, 2002. Backlogs are normally shipped within six months. It is the Company’s policy and industry practice to allow order cancellation up to the time of shipment; therefore customer orders for wood furniture are not firm until shipped. Upholstered furniture orders cannot be cancelled once the leather or fabric is cut. Over the last three fiscal years, 92% of all orders booked were ultimately shipped. Because of the Company’s quick delivery and its cancellation policy, management does not consider order backlogs to be an accurate indicator of expected business.

Manufacturing

The Company’s domestic wood furniture manufacturing strategy is to manufacture products that are on the leading edge of changing consumer demand for the home, such as home theater, home office, and computer furniture, as well as traditional bedroom. The Company stresses strong customer relationships in developing new products as well as improving existing ones. The Company believes strongly in employee involvement with employee and management teams working and communicating in all areas of manufacturing to improve production and quality related issues, stressing quality improvement, not quality control. To meet customer expectations of just-in-time inventory delivery, the Company’s strategy has been to strike a balance between minimizing cutting size together with increasing the frequency of cuttings on the one hand, and the efficiencies gained from longer production runs on the other. In recent years, cutting sizes have been reduced and frequencies of cuttings increased.

In order to enhance efficiency and profitability, the Company has emphasized the alignment of each of its product lines to the manufacturing strengths of each production facility. However, each facility continues to maintain the flexibility to produce multiple product lines, allowing the Company to shift products between facilities in order to balance capacity with demand. The Company communicates constantly with key suppliers in monitoring and addressing quality and delivery issues, a process that enables both the Company and its suppliers to respond quickly to constantly changing customer needs.

The Company’s domestic wood furniture manufacturing operations have suffered from lower demand and significant declines in volume for its bedroom, home office and home entertainment products principally due to the impact of lower-priced furniture products imported principally from China. These declines led to the downsizing of the Company’s Martinsville, Va. bedroom facility in 2001, the closing of its Kernersville, N.C. facility in 2003 and short work schedules at most of its manufacturing facilities over most of the 2001 to 2003 time period.

The Company’s upholstered furniture manufacturing strategy is to be a total leather resource for retailers positioned in the upper to upper-medium price range. Bradington-Young offers a comprehensive selection of over 250 leather covers. Leather upholstery comprises approximately 90% of the upholstery operation’s sales volume. In addition to specializing in leather, Bradington-Young also specializes in reclining, or “motion” seating, with about 50% of its products falling into this category. Within the promotional reclining chair and motion upholstery industry, Bradington-Young positions itself as a fashionable alternative, offering reclining chairs and motion upholstery with stylish covers, tailoring and scale, compatible with formal areas of the home.

Bradington-Young’s specialized approach to upholstery manufacturing is dependent upon a skilled and committed work force. The operation’s approximately 380 associates have the dedication and skill required to meet Bradington-Young’s objectives of offering a high level of quality, style and value in its specialized products. Management interacts frequently with employees and encourages their input and involvement in maintaining and improving the manufacturing process and product quality.

The upholstery manufacturing process begins with the cutting of leather and proceeds with the cutting and precision machining of frames. Precision frames are important for motion furniture to operate properly. Finally, the cut leather or fabric upholstery, frames, foam and other materials are assembled to build reclining chairs, executive seating, stationary seating and multiple seat reclining furniture.

The processing time for upholstered furniture averages 10 business days from the time the order is placed into production until it ships. Schedules are generated two times per week based on orders and available leather coverings in inventory. The business targets a six-week backlog, and operating schedules are generally reviewed and modified as necessary on a monthly basis.

The Company operates 1.8 million square feet of manufacturing capacity for its domestic wood and upholstered furniture production in North Carolina and Virginia. The Company considers its machinery and equipment to be generally modern and well maintained.

Imported Products

The Company imports finished furniture in a variety of styles and materials, and markets these products under the Seven Seas and Hooker Furniture names through its normal distribution channels. Imported products accounted for 48% of net sales in 2003 and 42% of net sales in 2002. Product lines include occasional tables, consoles, chests, casual and formal dining room furniture, bedroom furniture, entertainment centers, designer sink cabinets and accent items. The Company imports products primarily from China, the Philippines, Mexico, Indonesia, and Honduras sourcing through 16 independent agents representing over 65 factories.

In 2003, as part of its Bradington-Young acquisition, the Company acquired the Christopher Coleson line of wood accent furniture primarily sourced from Vietnam. As of December 1, 2003, the Christopher Coleson line was focused into a more limited presentation

5

Table of Contents

of less than 100 total products and was incorporated into the Company’s existing import program. The Christopher Coleson line will be positioned as a private label collection that is a step-up from the Seven Seas line in price point and style.

The Company has imported products from foreign manufacturers since 1988. The Company’s imported products business is subject to the usual risks inherent in importing products manufactured abroad, including, but not limited to, supply disruptions and delays, currency exchange rate fluctuations, economic and political fluctuations and destabilization, as well as the laws, policies, and actions of foreign governments and the United States affecting trade.

Because of the large number and diverse nature of foreign factories, the Company has flexibility in the placement of product in any particular country or factory. Factories located in China have become an important resource for the Company. In fiscal 2003, product sourced from China accounted for 62.2% and the largest factory in China from which the Company directly sources product accounted for 26.1% of the Company’s worldwide purchases of imported product. A sudden disruption in the Company’s supply chain from this factory, or from China in general, could significantly impact the Company’s ability to fill customer orders for products manufactured at that factory or in that country. If such a disruption were to occur, the Company believes that it would have sufficient inventory to adequately meet demand for a two to three-month period. The Company believes that it could, most likely at higher cost, source most of the products currently sourced in China from factories in different countries and could produce certain of those products domestically at its own factories. However, supply disruption delays on selected items could extend for up to six to nine months. If the Company were to be unsuccessful in obtaining those products from other sources, then a sudden disruption in the Company’s supply chain from its largest import wood furniture supplier, or from China in general, could have a short-term material adverse effect on the Company’s results of operations. Given the excess capacity available in China and other low cost producing countries, the Company believes the risks from these potential supply disruptions are manageable.

Since the Company transacts its import purchases in U.S. Dollars, a relative decline in the value of the U.S. Dollar could increase the cost of the Company’s imported products and adversely impact sales volume and profit margins during affected periods. Conversely, a relative increase in the value of the U.S. Dollar could decrease the cost of imported products and favorably impact sales volume and profit margins during affected periods. Because the majority of the Company’s imports are purchased from countries such as China, whose currencies are presently pegged to the U.S. Dollar, most of the Company’s exposure to foreign currency fluctuation is negated. See also “Item 7A. Quantitative and Qualitative Disclosures about Market Risk.”

Raw Materials

The principal materials used by the Company in manufacturing its wood furniture products include lumber, veneer, plywood, particleboard, hardware, glue, finishing material, glass products and fasteners. The Company uses a variety of species of lumber, including cherry, oak, poplar, pine and maple.

Leather, foam, wooden frames and metal mechanisms are the most significant materials used in manufacturing upholstered furniture products. Most of the leather is imported from Italy, Germany, Brazil and China. Leather is purchased as full hides, which are cut and sewn by Bradington-Young and also as pre-cut and sewn hides processed by the vendor to pattern specifications.

The Company believes that its sources of supply for its raw materials are adequate and that it is not dependent on any one supplier. The Company’s five largest suppliers accounted for approximately 16.5% of its purchases for its domestic wood furniture and upholstered furniture operations in 2003.

Competition

The Company is the eighteenth largest furniture manufacturer in North America based on 2002 sales, according to Furniture/Today, a trade publication. The furniture industry is highly competitive and includes a large number of foreign and domestic manufacturers, none of which dominates the market. The markets in which the Company competes include a large number of relatively small manufacturers; however, certain competitors of the Company have substantially greater sales volumes and financial resources than the Company. The Company also competes with foreign manufacturers, many of which have substantially lower production costs, including the cost of labor, than the Company. Competitive factors in the upper and upper-medium price ranges include style, price, quality, delivery, design, service, and durability. The Company believes that its long-standing customer relationships, responsive service, financial strength, experienced management and consistent support of its diverse, high quality product lines are important competitive advantages.

In 2003, a group of wood bedroom furniture manufacturers (including the Company) petitioned the International Trade Commission (the “ITC”) regarding alleged “dumping” at artificially low prices, wood bedroom furniture manufactured in China. The ITC has approved the petition, a ruling that supports evidence that imports from China have harmed the domestic wood bedroom furniture industry. The U.S. Department of Commerce is conducting an investigation into the allegations. The findings of the investigation could determine that tariffs on wood bedroom furniture imported from China are justified, a process that could take until September 2004. Domestically produced wood bedroom furniture accounted for 4.0%, and imported wood bedroom furniture accounted for 3.4%, of the Company’s 2003 net sales.

While initially supporting the petition, the Company has since withdrawn its support and is now taking a neutral position. The Company supports free, fair and legal trade and is opposed to any trade that involves illegally dumping furniture into the U.S. market, particularly when illegal trade negatively impacts domestic manufacturing jobs. The Company has come to believe that the potential adverse effects on its relationships with its customers and its Chinese suppliers outweigh the benefits of continuing to support the petition.

6

Table of Contents

Regardless of the outcome, the Company does not expect any ruling by the Department of Commerce or any tariffs that may be enacted on wood bedroom furniture imported from China to have a material adverse affect on the Company’s results of operations or financial condition. However, if deterioration in trade relations between the United States and China, or other factors, were to lead to short-term disruptions in the supply of imported product from China, such disruptions could, as discussed previously, have a short-term material adverse effect on the Company’s results of operations. Given the Company’s domestic manufacturing capability as well as the excess manufacturing capacity available in other low-cost producing countries, the Company believes this supply disruption risk is manageable.

Employees

As of November 30, 2003, the Company had approximately 1,900 employees. None of the Company’s employees are represented by a labor union. The Company considers its relations with its employees to be good.

The Company sponsors the Hooker Furniture Corporation Employee Stock Ownership Plan (the “ESOP”) to provide ownership and retirement benefits for eligible employees. The ESOP covers substantially all Company employees. The ESOP enables employees to share in the growth of the Company and to accumulate an ownership interest in the Company’s common stock. The ESOP trust held 29.1% of the Company’s outstanding common stock as of November 30, 2003.

Patents and Trademarks

The Hooker Furniture and Bradington-Young trade names represent many years of continued business. The Company believes these trade names are well recognized and associated with quality and service in the furniture industry. The Company also owns a number of patents (including a design applied for in 2003 that allows the consumer to conceal a big-screen television behind pocket doors), trademarks and licenses, none of which is considered to be material to the Company.

Governmental Regulations

The Company is subject to federal, state, and local laws and regulations in the areas of safety, health, and environmental pollution controls. Compliance with these laws and regulations has not in the past had any material effect on the Company’s earnings, capital expenditures, or competitive position; however, the effect of compliance in the future cannot be predicted. Management believes that the Company is in material compliance with applicable federal, state and local safety, health and environmental regulations.

Additional Information

The Company’s Website address is www.hookerfurniture.com. The Company makes available, free of charge through its Website, its Annual Report on Form 10-K, quarterly reports or Form 10-Q, current reports on Form 8-K and any amendments to those reports as soon as practicable after filing or furnishing the material to the Securities and Exchange Commission.

Forward-Looking Statements

Certain statements made in this report, including “Item 1 - Business” and “Item 7 - Management’s Discussion and Analysis,” are not based on historical facts, but are forward-looking statements. These statements can be identified by the use of forward-looking terminology such as “believes,” “expects,” “may,” “will,” “should,” “would,” or “anticipates,” or the negative thereof, or other variations thereon, or comparable terminology, or by discussions of strategy. These statements reflect the Company’s reasonable judgment with respect to future events and are subject to risks and uncertainties that could cause actual results to differ materially from those in the forward-looking statements. Those risks and uncertainties include but are not limited to: the cyclical nature of the furniture industry; domestic and international competition in the furniture industry; general economic or business conditions, both domestically and internationally; fluctuations in the price of key raw materials, including lumber and leather; supply disruptions or delays affecting imported products; adverse political acts or developments in the international markets from which the Company imports products; fluctuations in foreign currency exchange rates affecting the price of the Company’s imported products; and capital costs.

7

Table of Contents

ITEM 2. PROPERTIES

Set forth on the following table is information with respect to the Company’s principal properties. The Company believes that all these properties are well maintained and in good condition. The Company believes its manufacturing facilities are being efficiently utilized. The Company estimates that its facilities are currently being operated at approximately 85% of capacity, on a one-shift basis. All Company production facilities are equipped with automatic sprinkler systems, except for the Woodleaf, N.C. facility. All facilities maintain modern fire and spark detection systems, which the Company believes are adequate. The Company has leased certain warehouse facilities for its distribution and imports operation on a short-term basis. The Company is developing plans to further improve its warehousing and distribution capabilities and expects that it will be able to renew or extend these leases or find alternative facilities to meet its warehousing and distribution needs at a reasonable cost. All facilities set forth on following page are active and operational.

ITEM 3. LEGAL PROCEEDINGS

None.

ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.

8

Table of Contents

EXECUTIVE OFFICERS OF

HOOKER FURNITURE CORPORATION

The Company’s executive officers and their ages as of February 12, 2004 and the year each joined the Company are as follows:

Paul B. Toms, Jr. has been Chairman and Chief Executive Officer since December 2000. Mr. Toms was President and Chief Operating Officer from December 1999 to December 2000, Executive Vice President - Marketing from 1994 to December 1999, Senior Vice President - Sales & Marketing from 1993 to 1994, and Vice President - Sales from 1987 to 1993. Mr. Toms joined the Company in 1983 and has been a Director since 1993. Mr. Toms is the nephew of J. Clyde Hooker, Jr., who is a Director and the Chairman Emeritus of the Company.

Douglas C. Williams has been President and Chief Operating Officer since December 2000. Mr. Williams was Executive Vice President - Manufacturing from December 1999 to December 2000, Senior Vice President - Manufacturing from 1987 to 1999, and Vice President - Manufacturing from 1986 to 1987. Prior to 1986, Mr. Williams held various positions in manufacturing management. Mr. Williams joined the Company in 1971 and has been a Director since 1987.

E. Larry Ryder has been Executive Vice President - Finance and Administration since December 2000, Assistant Treasurer since 1998, and Assistant Secretary since 1990. Mr. Ryder was Senior Vice President - Finance and Administration from December 1987 to December 2000, Treasurer from 1989 to 1998, and Vice President - Finance and Administration from 1983 to 1987. Prior to 1983, Mr. Ryder served in various financial management positions. Mr. Ryder joined the Company in 1977 and was a Director from 1987 until 2003.

Raymond T. Harm has been Senior Vice President - Sales since joining the Company in 1999. Prior to joining the Company, Mr. Harm served as Vice President - Sales for The Barcalounger Company, a manufacturer of upholstered motion furniture, from 1992 to 1999.

Henry P. Long, Jr. has been Senior Vice President - Merchandising and Design since 1994. Mr. Long was Vice President - Sales from 1987 to 1994. Prior to 1987, Mr. Long served in various sales management positions. Mr. Long joined the Company in 1983 and was a Director from 1993 until 2003.

Michael P. Spece has been Senior Vice President - Import Division since December 2001. Mr. Spece was Vice President - Import Division from the time he joined the Company in 1997 until December 2001. Prior to joining the Company, Mr. Spece served as Merchandise Manager for Gabberts Furniture and Design Studio, an independent furniture retailer, from 1989 to 1997.

C. Scott Young has been the Chief Executive Officer and President of the Company’s wholly owned subsidiary Bradington-Young LLC since January 2003. Mr. Young joined the Company in connection with the Company’s acquisition of substantially all of the assets of the predecessor of that subsidiary. Mr. Young was a member and manager of the predecessor of Bradington-Young, and served as its Chief Executive Officer and President, from June 1995 to January 2003.

9

Table of Contents

Part II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED SHAREHOLDER MATTERS

Beginning in June 2002, the Company’s stock began trading on the NASDAQ SmallCap Market under the symbol “HOFT”. From April 2001 until June 2002, the Company’s common stock was quoted on the Over-the-Counter Bulletin Board (“OTCBB”) also under the symbol “HOFT”. The OTCBB is a regulated quotation service for subscribing members of the National Association of Securities Dealers (the “NASD”) that displays real-time quotes, last-sale prices and volume information in over-the-counter securities. The table below sets forth the high and low sales prices per share for the Company’s common stock for the periods indicated adjusted to reflect a two-for-one stock split distributed in the form of a 100% stock dividend on January 30, 2004. For periods before June 2002, the stock price information reported in the table below represents transactions in the Company’s common stock in the “over-the-counter” market during the periods indicated as reported to the NASD by the NASD’s member firms.

As of February 12, 2004, the Company had approximately 3,070 beneficial shareholders and 1,100 current and former employees participating in the Company’s ESOP who were eligible to vote shares of common stock. The Company pays dividends on its common stock on or about the last day of February, May, August and November, when declared by the Board of Directors, to shareholders of record approximately two weeks earlier. Although the Company presently intends to declare cash dividends at historical levels on a quarterly basis for the foreseeable future, the determination as to the payment and the amount of any future dividends will be made by the Board of Directors from time to time and will depend on the Company’s then current financial condition, capital requirements, results of operations and any other factors then deemed relevant by the Board of Directors. The following table sets forth the dividends per share paid by the Company with respect to its common stock during the Company’s two most recent fiscal years (adjusted to reflect the two-for-one stock split referred to previously):

10

Table of Contents

ITEM 6. SELECTED FINANCIAL DATA

The following selected financial data for each of the last five fiscal years ended November 30, 2003, has been derived from the Company’s audited, consolidated financial statements. The selected financial data should be read in conjunction with the Consolidated Financial Statements, including the related Notes, and Management’s Discussion and Analysis included elsewhere in this report.

11

Table of Contents

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS

The following discussion should be read in conjunction with the Selected Financial Data and the Consolidated Financial Statements, including the related Notes, contained elsewhere in this Annual Report.

In December 2003, the Company’s Board of Directors approved a two-for-one stock split, which was distributed in the form of a 100% stock dividend on January 30, 2004, to shareholders of record as of January 9, 2004. All share and per share data presented in this report reflect the effect of the stock split.

Overview

Ranked by Furniture/Today as the 18^th largest furniture manufacturer in North America based on 2002 sales, Hooker Furniture is a 79-year old producer and importer of wall and entertainment systems, home office, occasional, dining, bedroom and upholstered leather furniture with approximately 1,900 employees. The Company owns nine manufacturing facilities, a distribution center and a warehouse located in Virginia and North Carolina. Plant locations include Cherryville, Hickory, Pleasant Garden, Maiden, and Woodleaf, N.C. and Martinsville and Roanoke, Va. The Company’s principal customers are retailers of residential home furnishings, who are broadly dispersed in multiple locations throughout North America. The Company recognizes sales revenue when the risk of loss and title passes to the customer, generally at the time of shipment.

Over the three-year period ended November 30, 2003, the Company has operated in a sluggish economy impacted by low levels of consumer confidence. Additionally, the Company’s results of operations were affected in two opposing ways by lower-priced imported furniture products. First, the Company’s domestic wood furniture manufacturing operations have suffered from lower demand and significant declines in volume for its bedroom, home office and home entertainment products. These declines led to the downsizing of its Martinsville, Va. bedroom facility in 2001, the closing of its Kernersville facility in 2003 and continuing short work schedules at its manufacturing facilities over most of the 2001 to 2003 time period. Second, the Company’s imported wood furniture operations have experienced significant growth over this three-year period, with increased demand for its occasional, and dining furniture, designer sink cabinets and selective home office and home entertainment offerings. The Company’s entry into the container direct business has also fueled the dramatic growth of its import business. The Company’s Container Direct Program allows larger retailers to purchase full containers of imported product at attractive pricing with expedited delivery from the Company’s offshore suppliers directly to retailers.

Increased demand for imported wood furniture products coupled with a significant increase in purchases of imported inventory beginning in the second half of 2002 have fueled a significant growth in revenue that has outpaced the declines in demand for domestically produced wood furniture during the same time period. The Company has responded to increased demand for imported products by leasing additional warehousing and distribution capacity and increasing the selling and administrative effort to support the higher volumes.

In January 2003, the Company, through a wholly owned subsidiary, acquired substantially all of the assets of Cherryville, N.C.-based leather seating specialist Bradington-Young, LLC. The Company conducts the upholstery operation under the Bradington-Young name and specializes in upscale leather reclining chairs, executive desk chairs and motion and stationary upholstery products in the upper-medium to high-end price niches. The Company believes that Bradington-Young’s upholstery products complement its existing wood furniture product lines. During 2003, the Company merged its Hooker Furniture and Bradington-Young sales forces, thereby broadening the distribution network for upholstery products. Shipments of upholstery furniture products accounted for $44.2 million in net sales for the eleven-month period since the subsidiary was acquired.

Presently, the Company believes that the economic outlook is more positive than it has been since 2000, with improved consumer confidence poised to release the pent-up demand for furniture created by the growth in the housing industry over the last several years. The Company faces several major opportunities and challenges over the coming year:

12

Table of Contents

Results of Operations

The following table sets forth the percentage relationship to net sales of certain items included in the statements of income:

2003 Compared to 2002

Net sales in 2003 increased $60.7 million, or 24.4%, to $309.0 million, from $248.3 million in 2002, establishing a new annual net sales record for the Company. Net sales increases in 2003 can be attributed to growth resulting from the Company’s January 2003 acquisition of Bradington-Young and growth in Hooker Furniture’s wood furniture operations. Net sales for the Company’s wood furniture operations increased $16.5 million, or 6.6%, to $264.8 million for 2003, compared with $248.3 million in 2002.

Shipments of imported products, including shipments under the Company’s Container Direct Program, increased $44.8 million, or 43.0%, to $148.7 million, compared with $103.9 million in 2002. Upholstery shipments accounted for $44.2 million in net sales for the eleven-month period since the operation was acquired. Shipments of the Company’s domestically produced wood furniture declined $28.3 million, or 19.6%, to $116.1 million from $144.4 million last year. Average selling prices for domestically produced wood furniture decreased during 2003 while the average selling prices for imported wood furniture products increased. Overall wood furniture average selling prices declined during 2003, primarily due to the larger proportion of lower-priced imported products shipped.

For 2003, the Company’s gross profit margin declined to 26.6%, from 27.7% in 2002. The decline in 2003 is principally attributed to lower margins on imported shipments resulting from higher inbound freight and other transit related costs. Margins also declined on domestically produced wood furniture. During 2003, the Company’s domestic wood furniture manufacturing operations continued to experience reductions in raw material costs as a percentage of sales volume compared to 2002. However, these improvements were more than offset by increased labor and overhead costs as a percentage of sales volume, resulting from inefficiencies created by reduced work schedules during 2003 and heavier sales discounting. As a percentage of net sales, imported products generally reflect higher gross profit margins than domestically produced wood furniture. However, imported products also carry a higher component of selling and administrative expenses than domestically produced wood furniture, primarily expenses related to product sourcing, warehousing, and distribution.

The gross profit margins for upholstery products manufactured by Bradington-Young have been comparable to the gross profit margins the Company achieves on its domestically produced wood furniture products, ranging typically from 20-25% of net sales.

The closing of the Kernersville facility and reductions in inventory levels, coupled with strong incoming orders for domestically produced wood furniture during the 2003 fourth quarter, enabled the Company to increase its work schedules beginning in January 2004, after working reduced schedules for all of 2003. The Company plans to work 35 hours per week with no additional downtime through the first quarter of 2004. As a result, the Company expects that its production capacity utilization will increase from just below 70% during the fourth quarter of 2003 to slightly over 85% in January and February 2004. The Company expects that it can continue operating its facilities at 85% of capacity as long as incoming order rates remain at these current levels. With the strides that the Company’s domestic production facilities have made in lowering materials costs, shortening delivery times and controlling labor and overhead costs in the fourth quarter of 2003, profitability should improve as the Company increases work schedules.

Selling and administrative expenses as a percentage of net sales for 2003 increased to 17.8%, compared to 17.1% in 2002. Selling and administrative expenses rose as a percentage of net sales in 2003 principally due to increased selling, warehousing and distribution costs to support higher volumes of imported products. As a result of increased demand for imported products, the Company responded by increasing both its warehousing and distribution capacity and its selling and administrative efforts to support the higher volumes. The dollar amounts of selling and administrative expenses increased $12.4 million during 2003, mainly due to the addition of selling and administrative expenses for Bradington-Young and the increased import-related costs mentioned previously.

During the fiscal fourth quarter of 2002, the Company began leasing, equipping and staffing an aggregate of 287,000 square feet of additional warehousing and distribution space, all of which was fully operational during 2003. During the fiscal first quarter of 2004,

13

Table of Contents

the Company relocated a portion of this additional warehousing capacity to a new, slightly smaller facility and expects to operate this leased warehousing space during most of 2004. The Company is developing plans to further improve its warehousing and distribution capabilities and expects that it will be able to renew or extend existing leases or find alternative facilities to meet its warehousing and distribution needs at a reasonable cost.

Profitability for 2003 was negatively impacted by $1.5 million pretax ($911,000 after tax, or $0.08 per share) in restructuring and asset impairment charges related to the August 2003 closing of the Company’s Kernersville, N.C. manufacturing facility. The restructuring and asset impairment charges originally consisted of $1.3 million in severance and related benefits paid to 290 terminated hourly and salaried employees and $200,000 in related asset impairment costs. Substantially all of the severance and related benefits were paid to terminated employees in the 2003 third quarter. This special charge (before taxes) reduced operating income by 0.5% of net sales for 2003. The Company estimates that it achieved a production cost savings of approximately $250,000 during the fourth quarter of 2003 and anticipates that it will save $1.0 to $1.4 million annually beginning in fiscal 2004 as a result of the plant closing.

During the fourth quarter of 2003, the Company sold the Kernersville plant and some of its equipment for an aggregate consideration of $1.1 million ($164,000 in cash and a $900,000 note receivable). The property had an aggregate carrying value of $827,000. The Company has moved the production of patterns and products manufactured at the Kernersville plant to other Company facilities.

In the 2003 fourth quarter, the Company (1) reduced its accrual for restructuring and asset impairment charges related to the closing of the Kernersville facility, principally as a result of lower than anticipated severance costs and (2) recorded a gain on the sale of the facility. Both of these adjustments were offset by higher than anticipated cash payments incurred to prepare the Kernersville facility for sale.

As a result of the items mentioned previously, operating income declined $567,000, to $25.8 million, or 8.3% of net sales, in 2003, compared to $26.3 million, or 10.6% of net sales, in 2002.

Other income, net decreased to $286,000 in 2003 from $560,000 in 2002. The decline resulted primarily from declines in interest income, due principally to lower levels of invested cash during 2003, and a loss of $139,000 on the termination of an interest rate swap agreement in connection with the prepayment of $15.0 million on one of the Company’s term loans (see Notes 7 and 8 to the Consolidated Financial Statements beginning at page F-1 of this report).

Interest expense increased $544,000, to $2,638,000, in 2003, from $2,094,000 in 2002. The increase in interest expense during the 2003 period is due to higher debt levels, principally resulting from debt incurred in the acquisition of Bradington-Young, partially offset by lower average interest rates on the Company’s borrowings.

The Company’s effective tax rate declined to 37.1% in 2003 from 37.9% in 2002, principally as a result of lower state income taxes.

Net income for 2003 decreased $681,000 to $14.7 million, or $1.28 per share, from $15.4 million, or $1.36 per share, in 2002. The restructuring charge discussed above reduced net income by $911,000 after tax ($1.5 million pretax) or $0.08 per share in 2003.

2002 Compared to 2001

Net sales in 2002 increased $27.1 million, or 12.2%, to $248.3 million from $221.3 million in 2001. Increased unit volume in imported product lines (primarily occasional, bedroom, casual dining and entertainment centers) and domestically produced home office furniture was partially offset by lower unit volume in domestically produced bedroom furniture, wall systems, and entertainment centers. Average selling prices were lower during the 2002 periods due to the mix of products shipped (primarily higher imported furniture shipments). In 2001, the Company experienced a downturn in shipments, reflecting the industry-wide downturn experienced during most of that year.

During 2002, net sales for imported product lines, including sales under the Container Direct Program, increased $35.0 million, or nearly 51%, to $103.9 million, representing almost 42% of the Company’s total net sales. While increased customer demand and the new Container Direct Program accounted for most of the increase in volume during 2002, the Company also increased significantly its purchases of imported product during the last half of the year. The increased level of purchases enabled the Company to ship a substantial portion of its backlog of orders for imported products. The Company believes that its ability to improve delivery of imported products to customers generated additional demand.

Gross profit margin increased to 27.7% in 2002 compared to 23.2% in 2001. Most of the improvement during 2002 can be attributed to the increased shipments of “higher margin” imported products through customary distribution channels as well as the new Container Direct Program. Also during 2002, the Company’s domestic manufacturing facilities continued to see reductions in raw material costs, principally lumber and wood products, as a percentage of sales volume. Labor and overhead efficiencies also improved in spite of shortened work schedules at most plants during the second half of 2002. The Company also operated on reduced production schedules during the first nine months of 2001.

Selling and administrative expenses increased $3.1 million, or 8.0%, to $42.5 million in 2002 from $39.3 million in 2001. The increase was due principally to higher selling and distribution expenses to support increased sales (principally sales commissions). A decrease in selling and administrative expenses as a percentage of net sales contributed to the improvement in operating margins.

14

Table of Contents

Selling and administrative expenses as a percentage of net sales decreased to 17.1% in 2002, compared to 17.8% in 2001 as a result of higher net sales in the 2002 period.

A restructuring charge and a special cash distribution to former ESOP participants also contributed to the decline in operating income in 2001. These expenses were related to the workforce reduction at the Martinsville facility on August 30, 2001. The restructuring charge consisted of $881,000, pretax, in severance and early retirement benefits paid to terminated employees. In addition, the Company recorded a $321,000 pretax expense related to a cash distribution, required by the terms of the ESOP, to terminated employees who requested distribution of their ESOP accounts in cash. The amount of the distribution was based on the fair market value, as determined by an independent appraisal, of the approximately 19,000 shares of common stock held in those employees’ ESOP accounts. These shares were reallocated to active ESOP participants. These combined, non-recurring charges reduced 2001 operating income by $1.2 million, or 0.5% of net sales.

As a result of the above, operating income increased $15.2 million, to $26.3 million, or 10.6% of net sales, in 2002, compared to $11.1 million, or 5.0% of net sales, in 2001.

Other income in 2002 declined to $560,000 from $1.2 million in 2001. The decline was due principally to lower rental income. During 2001, the Company received rental income for land and a building that was sold on May 31, 2001 and for a warehouse facility under a lease agreement that terminated in August 2001. In July 2002, the Company decided to reactivate that warehouse facility, located in Martinsville, Virginia. The facility reopened September 3, 2002, for warehousing certain domestically produced goods, making room for more imported products at the Company’s central distribution center. Consequently, the $1.7 million carrying value of the reactivated facility (stated at the lower of carrying value, or fair value net of estimated selling expenses) was reclassified from “assets held for sale” (included in “other assets” on the balance sheets) to “property, plant, and equipment.”

Interest expense decreased $46,000 during 2002 from 2001, as a result of lower debt levels. Interest expense approximated $2.1 million in each period.

The Company’s effective tax rate increased to 37.9% in 2002 from 35.8% in 2001. The lower tax rate in 2001 is primarily attributed to the applicability of lower federal tax brackets.

Net income in 2002 increased 136.4%, to $15.4 million, from $6.5 million in 2001. Earnings per share increased to $1.36 in 2002, compared with $0.56 in 2001. The restructuring charge and the cash distribution to former ESOP participants discussed above reduced 2001 net income by $745,000 after tax, or $0.06 per share.

Financial Condition, Liquidity and Capital Resources

As of November 30, 2003, assets totaled $167.1 million, increasing from $149.9 million at November 30, 2002, principally as a result of the acquisition of Bradington-Young. Shareholders’ equity at November 30, 2003 was $116.3 million, compared to $101.0 million at November 30, 2002. The Company’s long-term debt, including current maturities, was $30.8 million at November 30, 2003, increasing $6.1 million from $24.7 million at November 30, 2002. This increase is attributed to the bank debt incurred to acquire Bradington-Young. The Company prepaid $15.0 million of this debt in November 2003.

Working capital increased to $74.8 million as of November 30, 2003, from $71.4 million at the end of fiscal 2002, reflecting the combined effects of a $5.6 million increase in current assets partially offset by a $2.1 million increase in current liabilities. The increase in current assets includes increases of $12.5 million in cash, $3.8 million in trade accounts receivable, $1.7 million in other current assets partially offset by a decline in inventories of $12.5 million. The increase in current liabilities is due to increases in current maturities of long-term debt and trade accounts payable partially offset by a decline in accrued expenses.

During 2003, proceeds from borrowings ($77.3 million), cash generated from operations ($42.1 million), and proceeds from the sale of property ($92,000) provided cash for the acquisition of Bradington-Young ($22.1 million, net of cash acquired), the refinancing and repayment of long-term debt ($75.3 million, including the repayment of $4.1 million of debt assumed in the Bradington-Young acquisition), an increase in available cash and cash equivalents ($12.5 million), capital expenditures ($4.0 million), payments to terminate interest rate swap agreements ($3.2 million), and dividend payments ($2.5 million).

During 2002, cash generated from operations ($5.7 million), a decrease in available cash and cash equivalents ($5.6 million) and proceeds from borrowings ($3.0 million) funded capital expenditures ($6.1 million), repayments of long-term debt ($5.2 million), dividend payments ($1.9 million), and the purchase and retirement of common stock ($1.2 million).

Cash generated from operations of $42.1 million during 2003 increased $36.4 million from $5.7 million in 2002. The increase was due to higher payments received from customers, partially offset by higher payments to suppliers and employees and higher income tax and interest payments. Cash received from customers increased $66.8 million as a result of the addition of Bradington-Young sales since January 2003 and higher wood furniture sales. Payments to suppliers and employees increased $26.4 million, principally to fund the production of upholstery products and the operating costs of Bradington-Young since January 2003, increased purchases of imported wood furniture products, and higher selling and administrative expenses, partially offset by reduced cash requirements to support lower domestic wood furniture production levels. Tax payments increased $3.5 million principally due to the timing of required payments in each respective period. Interest payments, net, increased $480,000 reflecting the higher average debt level to fund the acquisition of Bradington-Young partially offset by the effect of lower average interest rates.

15

Table of Contents

Investing activities consumed $26.0 million during 2003 compared to $6.1 million in 2002. The Company purchased Bradington-Young for cash payments totaling $22.1 million (net of cash acquired) in 2003. Purchases of plant, equipment, and other assets to maintain and enhance the Company’s facilities and business operating systems declined $2.1 million, to $4.0 million in 2003, compared to $6.1 million in 2002. As a result of lower demand for domestic wood furniture and the transfer of certain production equipment from the Kernersville, N.C. facility, which the Company closed in August 2003, to its other wood furniture manufacturing facilities, the Company’s capital expenditures in 2003 for production equipment were lower than in 2002.

The Company used cash of $3.6 million in financing activities in 2003, compared to $5.2 million in 2002. During the 2003 period, the Company borrowed (i) $42.8 million under new term loan agreements ($18.3 million under “Term Loan A” and $24.5 million under “Term Loan B”) to complete the refinancing of its long-term debt in April 2003, (ii) $26.7 million to fund the purchase of Bradington-Young and to repay debt assumed in the acquisition, and (iii) $7.8 million under its revolving credit line to fund other operating, investing, and financing cash flow activities. Also during 2003, the Company repaid (i) $17.8 million under its existing “Term Loan 1” and $25.0 million of the bank debt used to acquire Bradington-Young, primarily in connection with refinancing its long-term debt, (ii) $10.0 million under its revolving credit line, (iii) $4.1 million of debt assumed in the Bradington-Young acquisition and (iv) $18.4 million under Term Loans A and B (including a prepayment of $15.0 million on Term Loan B in November 2003). The Company also paid $3.2 million to terminate interest rate swap agreements and paid dividends of $2.5 million during 2003.

During 2002, the Company used cash in financing activities to repay $2.2 million, net of long-term debt, pay dividends of $1.9 million, repurchase approximately 120,900 shares of common stock from ESOP participants at a total cost of $1.1 million, or $8.98 per share, as required by the terms of the ESOP, and repurchase approximately 12,140 shares of common stock at a total cost of $83,000, or $6.81 per share, under the common stock repurchase program authorized by the Board of Directors in 2001.

In February 2003, the Company, in connection with the refinancing of its bank debt, terminated an interest rate swap agreement that in effect provided a fixed interest rate of approximately 7.4% on Term Loan 1 and entered into a new interest rate swap agreement. The new agreement is on substantially the same terms as the terminated agreement, except that it in effect provides for a fixed interest rate of 4.1% through 2010 on Term Loan A. The Company’s $3.0 million payment to terminate the swap agreement is being amortized as interest expense over the remaining repayment period for Term Loan A, resulting in an effective fixed interest rate of approximately 7.4% on Term Loan A.

Also in February 2003, the Company entered into a new interest rate swap agreement that in effect provided a fixed interest rate of 4.0% through 2008 on Term Loan B. The Company is accounting for the new interest rate swap agreements for Term Loans A and B as cash flow hedges.

In November 2003, the Company prepaid $15.0 million on Term Loan B. In connection with the prepayment on Term Loan B, the Company terminated the related interest rate swap agreement. The Company incurred a loss of $204,000 to terminate the swap agreement of which $139,000 was charged against “other income, net” in the statement of income. The balance of the termination payment is being amortized over the remaining repayment period for Term Loan B.

The aggregate fair market value of the Company’s swap agreements decreases when interest rates decline and increases when interest rates rise. Interest rates declined during 2002 and 2001 but remained relatively constant during 2003. The decrease in the aggregate fair market value of the effective portion of the agreements of $1.9 million after tax ($3.0 million pretax) as of November 30, 2003, and $1.9 million after tax ($3.1 million pretax) as of November 30, 2002, is reflected under the caption “accumulated other comprehensive loss” in the balance sheets. The Company also recognized additional interest expense of $44,000 in 2003, $170,000 in 2002 and $109,000 in 2001, for the ineffective portion of the swap agreements’ aggregate decrease in value. Approximately $1.3 million of the aggregate decrease in fair market value of the agreements is expected to be reclassified into earnings during the next 12 months as a component of the interest expense that will accrue on the debt.

The credit facility for the Company’s revolving credit line and Term Loans A and B contains, among other things, financial covenants as to minimum tangible net worth, debt service coverage, the ratio of funded debt to earnings before interest, taxes, depreciation, and amortization, and maximum capital expenditures. The Company was in compliance with these covenants as of November 30, 2003.

As of November 30, 2003, the Company had $13.7 million available under its revolving credit line to fund working capital needs, and $26.2 million available under additional committed and uncommitted lines of credit, to support the issuance of letters of credit. The Company believes it has the financial resources (including available cash, expected cash flow from operations, and lines of credit) needed to meet business requirements for the foreseeable future, including capital expenditures, working capital, purchases under the stock repurchase program, and dividends on the Company’s common stock. Cash flow from operations is highly dependent on order rates and the Company’s operating performance. The Company expects to spend $3.0 to $4.0 million in capital expenditures during fiscal 2004 to maintain and enhance its facilities and operating systems.

In December 2003, the Company’s Board of Directors approved a two-for-one stock split, which was distributed in the form of a 100% stock dividend on January 30, 2004, to shareholders of record as of January 9, 2004. Additionally, the Board declared an increased cash dividend of $0.06 per share (after giving effect to the stock split), payable on February 27, 2004, to shareholders of record February 13, 2004.

At the March 28, 2003 meeting of shareholders, an amendment to the Company’s articles of incorporation was approved to increase the number of authorized shares of the Company’s common stock from 10 million to 20 million shares.

16

Table of Contents

In 2001, the Company’s Board of Directors authorized the repurchase of up to an aggregate $5.2 million of the Company’s common stock. Repurchases may be made from time to time in the open market, or in privately negotiated transactions, at prevailing market prices that the Company deems appropriate. No shares of common stock were purchased by the Company during 2003. Through November 30, 2002, the Company had repurchased approximately 584,000 shares at a total cost of $2.5 million or an average of $4.29 per share. Based on the market value of the common stock as of November 30, 2003, the remaining $2.7 million of the authorization would allow the Company to repurchase approximately 0.9% of the 14.5 million shares outstanding, or 1.2% of the Company’s outstanding shares excluding the 4.2 million shares held by the ESOP.

Commitments and Contractual Obligations

As of November 30, 2003, the Company’s commitments and contractual obligations were as follows:

Acquisition

The Company, through a wholly owned subsidiary, acquired substantially all of the assets of Cherryville, N.C.-based leather seating specialist Bradington-Young, LLC, on January 2, 2003. The results of Bradington-Young’s operations have been included in the consolidated financial statements since that date. The Company acquired the Bradington-Young operation for an aggregate purchase price of $29.3 million, consisting of $22.1 million in cash (net of cash acquired), $6.8 million in assumed liabilities and acquisition-related fees of $457,000. The acquisition was financed principally with $25.0 million in bank debt. See “Note 7 – Long-Term Debt” to the Consolidated Financial Statements beginning on page F-1 of this report.

Outlook

The Company finished 2003 with strong momentum. Across all Company operations – imported and domestic wood furniture and Bradington-Young upholstery, incoming order rates for the fourth quarter were the strongest of any quarterly period in 2003. The pace of imported wood furniture sales growth slowed in the 2003 fourth quarter compared to the year-earlier quarter, primarily due to reduced inventory levels of imported products. The Company had slowed its ordering at mid-year to reduce imported product inventory levels. As a result, the Company did not have enough inventory to immediately capitalize on the strong incoming order rates for imports during the second half of 2003. Consequently, the Company’s backlog of orders for imported products grew. The Company expects inventory availability to begin improving late in the first quarter of fiscal 2004 and consequently expects finished goods inventory levels to increase $10.0 - $15.0 million by May or June 2004.

The Company expects that its net sales for the first quarter of 2004 will increase by zero to three percent compared to the first quarter of 2003. Wood furniture shipments for the 2004 first quarter are expected to be hampered by the availability of imported furniture products as mentioned above. Sales volume in last year’s first quarter benefited from a better inventory position. Upholstery shipments are expected to range from $12.0-$14.0 million in the 2004 fiscal first quarter, reflecting an additional month of operations compared to the 2003 first quarter. The upholstery operation was acquired at the beginning of January 2003.

With the Company’s wood furniture production facilities scheduled to operate on 35-hour per week work schedules in January and February and with the strides that those facilities have made in lowering materials costs, shortening delivery times and controlling labor and overhead costs, profitability should improve for domestic wood furniture operations.

Environmental Matters

Hooker Furniture Corporation is committed to protecting the environment as evidenced by its products and its manufacturing operations. The Company’s manufacturing sites generate hazardous and non-hazardous wastes, the treatment, storage, transportation and disposal of which are subject to various local, state and national laws relating to protecting the environment. The Company is in various stages of investigation, remediation or monitoring of alleged or acknowledged contamination at current or former manufacturing sites for groundwater and soil contamination and visible air emissions, none of which the Company deems material to its results of operations or financial position. The Company’s policy is to record environmental liabilities when losses are probable and can be reasonably estimated. The costs associated with the Company’s environmental responsibilities, compliance with federal, state and local laws regulating the discharge of materials into the environment, or otherwise relating to the protection of the environment, have not had and, in the opinion of management, will not have a material effect on the Company’s financial position, results of operations, capital expenditures, or competitive position.

17

Table of Contents

Critical Accounting Policies and Estimates

The Company’s significant accounting policies are more fully described in “Note 1 – Summary of Significant Accounting Policies” to the Consolidated Financial Statements beginning at page F-1 in this report. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions in certain circumstances that affect amounts reported in the accompanying financial statements and related notes. In preparing these financial statements, management has made its best estimates and judgments of certain amounts included in the financial statements, giving due consideration to materiality. The Company does not believe there is a great likelihood that materially different amounts would be reported related to the accounting policies described below; however, application of these accounting policies involves the exercise of judgment and the use of assumptions as to future uncertainties and as a result, actual results could differ from these estimates.

The Company evaluates the adequacy of its allowance for doubtful accounts at the end of each quarter. In performing this evaluation, the Company analyzes the payment history of its significant past due accounts, subsequent cash collections on these accounts and comparative accounts receivable aging statistics. Based on this information, along with consideration of the general strength of the economy, the Company develops what it considers to be a reasonable estimate of the uncollectible amounts included in accounts receivable. This estimate involves significant judgment by the management of the Company. Actual uncollectible amounts may differ from the Company’s estimate.

The Company values its inventories at the lower of cost (using the last-in, first-out (LIFO) method) or market. The Company evaluates its inventory for excess or slow moving items based on recent and projected sales and order patterns. The Company establishes an allowance for those items when the estimated market or net sales value is lower than their recorded cost. This estimate involves significant judgment by management and actual values may differ from the Company’s estimate.

Long-lived assets, such as property, plant and equipment, are evaluated for impairment when events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable through the estimated undiscounted future cash flows from the use of those assets. When any such impairment exists, the related assets are written down to fair value. Long-lived assets to be disposed of by sale are measured at the lower of their carrying amount or fair value less cost to sell, are no longer depreciated and are reported separately as assets held for sale in the balance sheets.

Accounting Pronouncements

In June 2002, the Financial Accounting Standards Board (“FASB”) issued Statement of Financial Accounting Standards No. 146, “Accounting for Costs Associated with Exit or Disposal Activities” (“SFAS 146”). This statement addresses financial accounting and reporting for costs associated with exit or disposal activities and nullifies Emerging Issues Task Force (EITF) Issue No. 94-3, “Liability Recognition for Certain Employee Termination Benefits and Other Costs to Exit an Activity (including Certain Costs Incurred in a Restructuring)”. This statement requires that a liability for costs associated with an exit or disposal activity be recognized when the liability is incurred. This statement also establishes that fair value is the objective for initial measurement of the liability. The provisions of this statement are effective for exit or disposal activities that are initiated after December 31, 2002. The Company adopted SFAS 146 effective January 1, 2003. The adoption of SFAS 146 had no impact on the timing of the recognition of costs and liabilities incurred in connection with the closing of the Company’s Kernersville facility. See “Note 11 – Restructuring Charges and Assets Held For Sale” to the Consolidated Financial Statements beginning on page F-1 in this report.

In November 2002, the FASB issued FASB Interpretation 45, “Guarantor’s Accounting and Disclosure Requirements for Guarantees, Including Indirect Guarantees of Indebtedness of Others” (“FIN 45”). FIN 45 elaborates on the disclosures to be made by a guarantor about its obligations under certain guarantees that it has issued. FIN 45 also requires that upon issuance of certain guarantees, the guarantor must recognize a liability for the fair value of the obligation it assumes under that guarantee. Product warranties, guarantees of contingent consideration in a business combination and guarantees issued between parents and their subsidiaries are subject to the disclosure requirements of FIN 45, but are not subject to the provisions for initial recognition and measurement. The disclosure requirements of FIN 45 are effective for interim or annual periods ending after December 15, 2002. The initial recognition and measurement provisions are applicable on a prospective basis to guarantees issued or modified after December 31, 2002. The adoption of this interpretation did not have an impact on the Company’s financial statements.

In December 2003, the FASB issued FASB Interpretation 46, “Consolidation of Variable Interest Entities” (“FIN 46”). FIN 46 clarifies the application of Accounting Research Bulletin No. 51, “Consolidated Financial Statements,” to certain entities in which equity investors do not have the characteristics of a controlling financial interest or do not have sufficient equity at risk for the entity to finance its activities without additional subordinated financial support from other parties. A variable interest entity is required to be consolidated by the company that has a majority of the exposure to expected losses of the variable interest entity. FIN 46 is effective immediately for variable interest entities created after January 31, 2003. For variable interest entities in which an enterprise holds a variable interest that it acquired before February 1, 2003, FIN 46 applies in the first fiscal year or interim period beginning after December 15, 2003. The adoption of FIN 46 has not had and the Company believes that the prospective provisions of FIN 46 will not have an impact on its financial statements.

In April 2003, the FASB issued Statement of Financial Accounting Standards No. 149, “Amendment of Statement 133 on Derivative Instruments and Hedging Activities” (“SFAS 149”). SFAS 149 was issued to amend and clarify financial accounting and reporting for derivative instruments and hedging activities under SFAS 133, “Accounting for Derivative Instruments and Hedging Activities.”

18

Table of Contents

Specifically, SFAS 149 clarifies under what circumstances a contract with an initial net investment meets the characteristic of a derivative and when a derivative contains a financing component. Additionally, SFAS 149 amends the definition of an “underlying” to conform to the definition used in FIN 45 and amends certain other existing pronouncements. SFAS 149 is effective for contracts entered into or modified subsequent to June 30, 2003, and hedging relationships designated subsequent to June 30, 2003. The provisions of this standard have been applied prospectively by the Company from that date. The adoption of SFAS 149 did not have an impact on the Company’s financial statements.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

The Company is exposed to market risk from changes in interest rates and foreign currency exchange rates, which could impact its results of operations and financial condition. The Company manages its exposure to these risks through its normal operating and financing activities and through the use of interest rate swap agreements with respect to interest rates.

The Company’s obligations under its lines of credit, industrial revenue bonds and term loans, all bear interest at variable rates. The Company’s outstanding debt (including current maturities) as of November 30, 2003, amounted to $6.4 million under the industrial revenue bonds, $17.4 million under Term Loan A and $7.1 million under Term Loan B. As of November 30, 2003, no balance was outstanding under the Company’s revolving credit line. The Company has entered into interest rate swap agreements that, in effect, fix the rate of interest on the industrial revenue bonds at 4.7% through 2006 and Term Loan A at 4.1% through 2010. A fluctuation in market interest rates of one percentage point (or 100 basis points) would not have a material impact on the Company’s results of operations or financial condition.

For imported products, the Company generally negotiates firm pricing with its foreign suppliers, for periods typically of up to one year. The Company accepts the exposure to exchange rate movements beyond these negotiated periods without using derivative financial instruments to manage this risk. Since the Company transacts its purchases of import products in U.S. Dollars, a decline in the relative value of the U.S. Dollar could increase the cost of imported products when the Company renegotiates pricing. As a result, a weakening U.S. Dollar exchange rate could adversely impact sales volume and profit margins during such periods. However, the Company generally expects to reflect substantially all of the effect of any price changes from suppliers in the price it charges for its imported products.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The financial statements listed in Item 15(a) of this report are incorporated herein by reference and are filed as a part of this report.

EBIT and EBITDA Information

Set forth below is the Company’s income before interest and taxes, or EBIT, and income before interest, taxes, depreciation and amortization, or EBITDA, for each of the last five fiscal years ended November 30, 2003. This information has been derived from the Company’s Consolidated Financial Statements. For each period presented, EBIT and EBITDA have been reconciled to the Company’s net income. The Company provides these non-GAAP financial measures because it believes they are widely accepted financial indicators of the Company’s performance. This information should be read in conjunction with the Consolidated Financial Statements, including the related Notes, and Management’s Discussion and Analysis included elsewhere in this annual report on Form 10-K for the year ended November 30, 2003.

19

Table of Contents

None (the disclosure called for by this Item has been previously disclosed in the Company’s Proxy Statement, dated February 28, 2003, for its Annual Meeting of Shareholders held March 28, 2003).

The Company’s management and KPMG LLP (“KPMG”), the Company’s independent auditors, advised the Company’s Audit Committee that during the course of the fiscal 2003 audit, material weaknesses in internal controls were noted relating to lack of documented second review and approval of certain recorded transactions for financial reporting purposes and segregation of duties and formal documentation process for lumber purchasing.

Management and KPMG LLP also advised the Audit Committee of significant deficiencies with respect to certain other matters, principally relating to documentation of processes and responsibilities. In some cases, the identified weaknesses or deficiencies could also constitute deficiencies in the Company’s disclosure controls and procedures.

The Company’s principal executive officer and principal financial officer believe that the procedures followed by the Company provide reasonable assurance that the identified weaknesses and deficiencies did not lead to material misstatements in the Company’s audited consolidated financial statements included in this report on Form 10-K. However, the Company recognizes the need for additional documentation of processes and, in some cases, enhanced procedures, and has since corrected the material weaknesses in internal controls and initiated corrective measures to address the significant deficiencies.

Consequently, taking into account the issues and corrective measures discussed above, based on their review as of the end of November 30, 2003, the Company’s principal executive officer and principal financial officer have concluded that the Company’s disclosure controls and procedures are effective to provide reasonable assurance that information required to be disclosed by the Company in the reports that it files or submits under the Securities Exchange Act of 1934, as amended, is accumulated and communicated to the Company’s management, including its principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure and are effective to provide reasonable assurance that such information is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms.

Except for the corrective measures referred to above, there have been no other changes in the Company’s internal control over financial reporting during the quarter ended November 30, 2003, that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Part III

In accordance with General Instruction G (3) of Form 10-K, the information called for by Items 10, 11, 12, 13 and 14 of Part III is incorporated by reference to the Company’s definitive Proxy Statement for its Annual Meeting of Shareholders scheduled to be held March 30, 2004, except for:

Part IV

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K

20

Table of Contents

21

Table of Contents

22

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

23

Table of Contents

HOOKER FURNITURE CORPORATION AND SUBSIDIARIES

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

F-1

Table of Contents

INDEPENDENT AUDITORS’ REPORT

The Board of Directors and Shareholders of

Hooker Furniture Corporation

We have audited the accompanying consolidated balance sheet of Hooker Furniture Corporation and subsidiaries as of November 30, 2003, and the related consolidated statements of income, shareholders’ equity and cash flows for the year then ended. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audit.

We conducted our audit in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, the 2003 consolidated financial statements referred to above present fairly, in all material respects, the financial position of Hooker Furniture Corporation and subsidiaries as of November 30, 2003, and the results of their operations and their cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America.

Greensboro, North Carolina

December 19, 2003

INDEPENDENT AUDITORS’ REPORT

To the Shareholders of

Hooker Furniture Corporation and Subsidiary

Martinsville, Virginia

We have audited the accompanying consolidated balance sheet of Hooker Furniture Corporation and subsidiary as of November 30, 2002 and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the two years in the period ended November 30, 2002. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Hooker Furniture Corporation and subsidiary at November 30, 2002, and the results of their operations and their cash flows for each of the two years in the period ended November 30, 2002, in conformity with accounting principles generally accepted in the United States of America.

Richmond, Virginia

December 13, 2002, except for Note 12, presented in the 2002 Annual Report, which is as of January 2, 2003 and Note 17 which is as of December 19, 2003

F-2

Table of Contents

HOOKER FURNITURE CORPORATION AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(In thousands, except per share data)

See accompanying Notes to Consolidated Financial Statements.

F-3

Table of Contents

HOOKER FURNITURE CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME

(In thousands, except per share data)

See accompanying Notes to Consolidated Financial Statements.

F-4

Table of Contents

HOOKER FURNITURE CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)