UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the Fiscal Year Ended December 28, 2002

or

Commission File No. 1-9973

THE MIDDLEBY CORPORATION
(Exact name of Registrant as specified in its charter)

Registrant’s telephone number, including area code: 847-741-3300

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act:

Title of each class
Common stock,
par value $0.01 per share

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.
Yes |X|     No |   |.

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. |X|

Indicate by check mark whether the registrant is an accelerated filer (as defined by Rule 12b-2 of the act)
Yes |   |     No |X|.

The aggregate market value of the voting stock held by nonaffiliates of the Registrant as of June 29, 2002 was approximately $41,069,136.

The number of shares outstanding of the Registrant’s class of common stock, as of March 24, 2003, was 9,027,972 shares.

Documents Incorporated by Reference

Part III of Form 10-K incorporates by reference the company’s definitive proxy statement to be filed pursuant to Regulation 14A in connection with the 2003 annual meeting of stockholders.

THE MIDDLEBY CORPORATION AND SUBSIDIARIES
DECEMBER 28, 2002

FORM 10-K ANNUAL REPORT

TABLE OF CONTENTS

PART I

General

        The Middleby Corporation (“Middleby” or the “company”), through its operating subsidiary Middleby Marshall Inc. (“Middleby Marshall”) and its subsidiaries, is a leader in the design, manufacture, marketing, distribution, and service of a broad line of cooking and warming equipment used in all types of foodservice operations, including quick-service restaurants, full-service restaurants, retail outlets, hotels and other institutions. The company’s products include Middleby Marshall® and CTX® conveyor oven equipment, Blodgett® convection, conveyor, and deck oven equipment, Blodgett Combi® cooking equipment, Blodgett Range® ranges, Pitco Frialator® fryer equipment, Southbend® ranges, convection ovens and heavy-duty cooking equipment, SteamMaster® steam cooking equipment, Toastmaster® toasters and counterline cooking and warming equipment, and MagiKitch’n® charbroilers and catering equipment.

        Founded in 1888 as a manufacturer of baking ovens, Middleby Marshall Oven Company was acquired in 1983 by TMC Industries Ltd., a publicly traded company that changed its name in 1985 to The Middleby Corporation. Throughout its history, the company had been a leading innovator in the baking equipment industry and in the early 1980s positioned itself as a leading foodservice equipment manufacturer by introducing the conveyor oven that revolutionized the pizza market. In 1989, the company became a broad line equipment manufacturer through the acquisition of the Foodservice Equipment Group of Hussmann Corporation, which included Southbend, Toastmaster and CTX. The company initiated its international distribution and service strategy in 1990 by acquiring a controlling interest in Asbury Associates, Inc., which was renamed Middleby Worldwide in 1999. In 1991, the company established Middleby Philippines Corporation (“MPC”) to provide foodservice equipment and custom kitchen fabrications to restaurant and hotel chains in the Pacific Rim and Middle Eastern markets. In 2001, Middleby acquired the commercial cooking subsidiary, Blodgett Holdings, Inc. (“Blodgett”) from Maytag Corporation to complete its line up of products in all the major cooking equipment segments. The acquisition resulted in the addition of the Blodgett, Pitco and MagiKitch’n brand names into the company’s portfolio.

        The company has identified, as a major area of growth, the rapidly growing international markets targeted by restaurant and hotel chains. To capture this market, the company established its International Distribution Division, Middleby Worldwide. Middleby’s global network enables it to offer equipment to be delivered virtually anywhere in the world, installed and serviced by Middleby. The company believes that its full service program provides it with a competitive advantage. As the first company in its industry to take these initiatives, Middleby has positioned itself as a preferred foodservice equipment supplier to major restaurant chains expanding globally.

- 1 -

Business Divisions and Products

        The company conducts its business through two principal business divisions, the Cooking Systems Group and the International Distribution Division. See Note 11 to the Consolidated Financial Statements for further information on the company’s business divisions.

Cooking Systems Group

        Middleby Cooking Systems Group, the company’s manufacturing division, has operations located in Illinois, New Hampshire, North Carolina, Vermont and the Philippines. The division’s principal product groups include:

        Conveyor Oven Equipment Product Group – Middleby Marshall, Blodgett and CTX

        The conveyor oven equipment product group manufactures ovens that are ideal for high volume applications, providing for maximum production and efficiency, while allowing a restaurant owner to retain flexibility in menu offerings. The conveyor oven equipment allows for standardization of the food preparation process, which in turn provides for labor savings opportunities and a greater consistency of the final product. As a result, most major pizza chains, as well as other non-pizza restaurants chains and institutions utilize conveyor oven equipment.

        The Middleby Marshall oven line is the world’s conveyor cooking equipment leader. A brand of baking and cooking equipment since 1888, the Middleby Marshall name is renowned for quality and durability. Middleby Marshall ovens are used by a majority of the leading pizza chains. Middleby Marshall conveyor ovens utilize a patented process, Jet-Sweep air impingement, that forces heated air at high velocities through a system of nozzles above and below the food product, which is placed on a moving conveyor belt. This process achieves faster baking times and greater consistency of bake than conventional ovens.

        The company also markets conveyor ovens under the Blodgett and CTX brands, which are designed for more specialized, lower volume applications. The broad line of Blodgett conveyor ovens include smaller table-top ovens suited for fast food kiosks in airports and shopping malls. CTX conveyor ovens are sold to restaurants and pizza outlets and offer such additional features as a programmable time and temperature control as well as a self-cleaning function.

        Core Cooking Equipment Product Group – Blodgett, Blodgett Combi, Blodgett Range, Pitco Frialator, Southbend and MagiKitch’n

        The Core Cooking Equipment Product Group manufactures the equipment that is central to most any restaurant kitchen. The products offered by this division include ranges, convection ovens, fryers, combi-ovens, charbroilers, and steam equipment. These products are distributed under the Blodgett, Pitco Frialator, Southbend, and MagiKitch’n brand names.

- 2 -

        Blodgett, known for its durability and craftsmanship, is the leading brand of convection and combi ovens. In demand since the late 1800‘s, the Blodgett oven has stood the test of time and set the industry standard. Restaurants, fast-food chains, hotels, hospitals and institutions rely on the Blodgett name.

        Pitco Frialator offers a broad line of gas and electric equipment combining reliability with efficiency in simple-to-operate professional frying equipment. Since 1918, Pitco fryers have captured a major market share by offering simple, reliable equipment for cooking menu items such as french fries, onion rings, chicken, donuts, and seafood. By their very design, Pitco’s fryers offer substantial advances over bottom-fired fryers. The tube-fired heating system creates a larger heat transfer area that quickly heats oil to proper cooking temperatures. Since there is less waiting for oil to heat, your food is less likely to absorb shortening and more likely to maintain flavor. The innovation continues today. Pitco Frialator now offers the Solstice™ Series — a selection of fryers that operate cooler — and smarter — for maximum efficiency. The company also markets pasta cookers and rethermalizers under the Pitco brand name, which are ideal for schools and other largescale kitchen operations that re-heat frozen prepared foods. Pitco’s unique rethermalizing process improves product consistency while providing for labor and energy savings.

        In the market for 100 years, Southbend products, mainly heavy-duty, gas-fired equipment, include ranges, convection ovens, broilers, fryers, griddles, steamers and steam cooking equipment. Southbend products are offered as standardized equipment for general use in restaurants and institutions, and also are made to specification for use by the professional chef. Southbend is known for its innovative product features and premier cooking line. Its 40,000 BTU Pyromax® range doubled the industry standard for BTU’s when it was introduced in 1996. Southbend’s Marathoner Gold® convection oven has been judged by a leading industry publication to be the best baking convection oven on the market. The Southbend Simple Steam steamer is the industry’s lowest maintenance and lowest water usage pressureless steamer, and was awarded the 1998 Product Design of the Year by the Electric Foodservice Council.

        For more than 60 years, MagiKitch’n has been refining the art of charbroiling. For easy grilling of everything from steaks, sausages, ribs and chicken to burgers and brats, professional chefs enjoy the quality construction, high performance and flexible operation of the MagiKitch’n line of products. In 1991, MagiKitch’n used their 60 years of experience producing quality restaurant grills, to craft a new line of commercial outdoor cooking equipment. MagiCater portable charbroilers have a modular design for easy transport, fast set-up, and ease of cleaning. MagiKitch’n is unsurpassed in performance, quality construction, and flexibility.

        In 2002, the company began the manufacture of ranges under the Blodgett brand name to provide an offering for the high-end segment of the market. This product is suited for four-star restaurants and other restaurants requiring durability and cosmetic appeal.

- 3 -

        Counterline Cooking Equipment Product Group — Toastmaster

        Counterline cooking equipment products are predominantly light and medium-duty electric equipment, including pop-up and conveyor toasters, hot food servers, foodwarmers and griddles marketed under the Toastmaster brand name. A leading equipment brand since 1917, Toastmaster has been voted the number one toaster product for nineteen consecutive years in the Annual Industry Leaders survey by ID magazine. As a major supplier to global restaurant chains, Toastmaster is able to customize products to fit a chain’s particular needs. Toastmaster products are designed with energy saving features and food safety technologies.

        The company does not produce consumer products under the Toastmaster name, as an unaffiliated company, Toastmaster, Inc., owns the rights to the brand name for consumer markets.

        International Specialty Equipment Product Group — Middleby Philippines Corporation

        Middleby Philippines Corporation (MPC), founded in 1991, provides the company with a low cost manufacturing capability in Asia, manufacturing custom kitchen fabrications. Principal products include fryers and kitchen fabrications. MPC also produces component parts for the company’s domestic operations. MPC’s manufacturing and assembly operations are located in a modern 54,000 square foot facility outside of Manila.

International Distribution Division — Middleby Worldwide

        Middleby Worldwide provides integrated export management and distribution services. The division sells the company’s product lines and certain non-competing complementary product lines of other manufacturers throughout the world. The company offers customers a complete package of kitchen equipment, delivered and installed in over 100 countries. For a local country distributor or dealer, the division provides centralized sourcing of a broad line of equipment with complete export management services, including export documentation, freight forwarding, equipment warehousing and consolidation, installation, warranty service and parts support. Middleby Worldwide has regional export management companies in Asia, Europe and Latin America complemented by sales and distribution offices located in Canada, China, India, Korea, Mexico, the Philippines, Spain, Taiwan and the United Kingdom.

- 4 -

The Customers and Market

        The company’s domestic sales are primarily through independent dealers and distributors and are marketed by the company’s sales personnel and network of independent manufacturers’ representatives. The company’s international sales are through a combined network of independent and company-owned distributors. The company maintains sales and distribution offices in Canada, China, India, Korea, Mexico, the Philippines, Spain, Taiwan and the United Kingdom. The company’s end-user customers include: (i) fast food or quick-service restaurants, (ii) full-service restaurants, including casual-theme restaurants, (iii) retail outlets, such as convenience stores, supermarkets and department stores and (iv) public and private institutions, such as hotels, resorts, schools, hospitals, long-term care facilities, correctional facilities, stadiums, airports, corporate cafeterias, military facilities and government agencies. Many of the dealers in the U.S. belong to buying groups that negotiate sales terms with the company. Certain large multi-national restaurant and hotel chain customers have purchasing organizations that manage product procurement for their systems. Included in these customers are several large restaurant chains, which account for a significant portion of the company’s business.

        During the past several decades, growth in the U.S. foodservice industry has been driven primarily by population growth, economic growth and demographic changes, including the emergence of families with multiple wage-earners and growth in the number of higher-income households. These factors have led to a demand for convenience and speed in food preparation and consumption. As a result, U.S. foodservice sales grew for the eleventh consecutive year to approximately $408 billion in 2002. Sales in 2003 are projected to increase to $426 billion, an increase of 4.5% over 2002. The quick-service restaurant segment within the foodservice industry has been the fastest growing segment since the mid ‘80‘s. Total quick-service sales amounted to $116 billion in 2002 and are expected to increase 4.1% to $121 billion in 2003. The full-service restaurants represent the largest portion of the foodservice industry and represented $146 billion in sales in 2002 and are expected to increase 4.8% to $153 billion in 2003. This segment has seen increased chain concepts and penetration in recent years, particularly in upscale segments, driven by the aging of the baby boom generation.

        Over the past decade, the food service industry has enjoyed steady growth in the United States due to the development of new quick-service and casual-theme restaurant chain concepts, the expansion into nontraditional locations by quick-service restaurants and store equipment modernization. In the international markets, foodservice equipment manufacturers have been experiencing stronger growth than the U.S. market due to rapidly expanding international economies and increased opportunity for expansion by U.S. chains into developing regions.

        The company believes that the worldwide foodservice equipment market has sales in excess of $20 billion at a growth rate outpacing the U.S. The cooking and warming equipment segment of this market is estimated to exceed $1.5 billion in North America and $3.0 billion worldwide. The company believes that continuing growth in demand for foodservice equipment will result from the development of new restaurant units and the expansion of U.S. chains into international markets and the replacement and upgrade of existing equipment.

- 5 -

        The company’s backlog of orders was $17,560,000 at December 28, 2002, all of which is expected to be filled during 2003. The backlog at December 29, 2001 was $18,963,000. The backlog is not necessarily indicative of the level of business expected for the year, as there is generally a short time between order receipt and shipment for the majority of the company’s products.

Marketing and Distribution

        Middleby’s products and services are marketed in the U.S. and in over 100 countries through a combination of the company’s sales personnel and international marketing divisions and subsidiaries, together with an extensive network of independent dealers, distributors, consultants, sales representatives and agents. The company’s relationships with major restaurant chains are primarily handled through an integrated effort of top-level executive and sales management at the corporate and business division levels to best serve each customer’s needs.

        In the United States, the company distributes its products to independent end-users through a network of non-exclusive dealers nationwide, who are supported by manufacturers’ marketing representatives. Sales are made direct to certain large restaurant chains that have established their own procurement and distribution organization for their franchise system.

        International sales are primarily made through the International Distribution Division network to independent local country stocking and servicing distributors and dealers and, at times, directly to major chains, hotels and other large end-users by the company-owned distribution companies.

Services and Product Warranty

        The company is an industry leader in equipment installation programs and after-sales support and service. The company provides warranty on its products typically for a one year period and in certain instances greater periods up to ten years. The emphasis on global service increases the likelihood of repeat business and enhances Middleby’s image as a partner and provider of quality products and services. It is critical to major foodservice chains that equipment providers be capable of supporting equipment on a worldwide basis.

        The company’s domestic service network consists of over 100 authorized service parts distributors and 3,000 independent certified technicians that have been formally trained and certified by the company through its factory training school and on-site installation training programs. The service network is separate from the sales network to ensure that technicians remain focused on service issues rather than new business. Technicians work through service parts distributors, which are required to provide around-the-clock service via a toll-free paging number. The company provides substantial technical support to the technicians in the field through factory-based technical service engineers. The company has stringent parts stocking requirements for these agencies, leading to an exceptionally high first-call completion rate for service and warranty repairs.

- 6 -

        Middleby’s international service network covers over 100 countries with more than 1,000 service technicians trained in the installation and service of the company’s products and supported by internationally-based service managers along with the factory-based technical service engineers. As with its domestic service network, the company maintains stringent parts stocking requirements for its international distributors.

Competition

        The cooking and warming segment of the foodservice equipment industry is highly competitive and fragmented. Within a given product line, the industry remains fairly concentrated, with typically a small number of competitors accounting for the bulk of the line’s industry-wide sales. Industry competition includes companies that manufacture a broad line of products and those that specialize in a particular product line. Competition in the industry is based upon many factors, including brand recognition, product features and design, quality, price, delivery lead times, serviceability and after-sale service. The company believes that its ability to compete depends on strong brand equity, exceptional product performance, short lead-times and timely delivery, competitive pricing, and its superior customer service support. Management believes that the demand for its labor saving, multi-functional and energy efficient equipment will increase, driven by quick-service and full-service chains that face labor supply issues, space limitations and increasing operating costs.

        In the international markets, the company competes with U.S. manufacturers and numerous global and local competitors. Management believes that the company’s integrated international export management and distribution capabilities uniquely position it to provide value-added services to U.S. and internationally based chains, as well as to local country distributors offering a complete line of kitchen equipment.

        The company believes that it is one of the largest multiple-line manufacturers of cooking and warming equipment in the U.S. and worldwide, although some of its competitors are units of operations that are larger than the company and possess greater financial and personnel resources. Among the company’s major competitors are Enodis plc; Hobart Corporation and Vulcan-Hart Corporation, both subsidiaries of Illinois Tool Works Inc.; Wells Manufacturing company, a subsidiary of United Technologies Corporation; Zanussi, a subsidiary of Electrolux AB; and Ali Group.

- 7 -

Manufacturing and Quality Control

        The company manufactures product in four domestic and one international production facilities. In Elgin, Illinois, the company manufactures conveyor oven and counterline cooking equipment products. In Burlington, Vermont the company manufactures its combi oven, convection oven and deck oven product lines. In Fuquay-Varina, North Carolina, the company manufactures ranges, steamers, combi ovens, convection ovens and broiling equipment. In Bow, New Hampshire, the company manufactures fryers, charbroilers and catering equipment products. In Laguna, the Philippines the company manufactures fryers, kitchen fabrication and component parts for the U.S. manufacturing facilities. Metal fabrication, finishing, sub-assembly and assembly operations are conducted at each manufacturing facility. Equipment installed at individual manufacturing facilities includes numerically controlled turret presses and machine centers, shears, press brakes, welding equipment, polishing equipment, CAD/CAM systems and product testing and quality assurance measurement devices. The company’s CAD/CAM systems enable virtual electronic prototypes to be created, reviewed and refined before the first physical prototype is built.

        Detailed manufacturing drawings are quickly and accurately derived from the model and passed electronically to manufacturing for programming and optimal parts nesting on various numerically controlled punching cells. The company believes that this integrated product development and manufacturing process is critical to assuring product performance, customer service and competitive pricing.

        The company has established comprehensive programs to ensure the quality of products, to analyze potential product failures and to certify vendors for continuous improvement. Every product manufactured or licensed by the company is individually tested prior to shipment to ensure compliance with company standards.

Sources of Supply

        The company purchases its raw materials and component parts from a number of suppliers. The majority of the company’s material purchases are standard commodity-type materials, such as stainless steel, electrical components and hardware. These materials and parts generally are available in adequate quantities from numerous suppliers. Some component parts are obtained from sole sources of supply. In such instances, management believes it can substitute other suppliers as required. The majority of fabrication is done internally through the use of automated equipment. Certain equipment and accessories are manufactured by other suppliers for sale by the company. The company believes it enjoys good relationships with its suppliers and considers the present sources of supply to be adequate for its present and anticipated future requirements.

- 8 -

Research and Development

        The company believes its future success will depend in part on its ability to develop new products and to improve existing products. Much of the company’s research and development efforts are directed to the development and improvement of products designed to reduce cooking time, reduce energy consumption or minimize labor costs, while maintaining consistency and quality of cooking production. The company has identified these issues as key concerns of most restaurant operators. The company often identifies product improvement opportunities by working closely with customers on specific applications. Most research and development activities are performed by the company’s technical service and engineering staff located at each manufacturing location. On occasion, the company will contract outside engineering firms to assist with the development of certain technical concepts and applications.

Licenses, Patents, and Trademarks

        The company owns numerous trademarks and trade names; among them, Blodgett®, Blodgett Combi®, Blodgett Range®, CTX®, MagiKitch’n®, Middleby Marshall®, Pitco Frialator®, Southbend®, SteamMaster® and Toastmaster® are registered with the U.S. Patent and Trademark Office and in various foreign countries.

        The company holds numerous patents covering technology and applications related to various products, equipment and systems. Management believes the expiration of any one of these patents would not have a material adverse effect on the overall operations or profitability of the company.

        Middleby Marshall has an exclusive license from Enersyst Development Center L.L.C. (“Enersyst”) to manufacture, use and sell Jetsweep air impingement ovens in the U.S. for commercial food applications in which the interior length or width of a rectangular cooking area, or in which the diameter of a circular cooking area, equals or exceeds 36 inches. The Enersyst license covers numerous existing patents and provides further exclusive and non-exclusive license rights to existing and future developed technology. Middleby Marshall also holds an exclusive sublicense from Lincoln Foodservice Products, Inc. (“Lincoln”), a subsidiary of Welbilt Corporation, to manufacture, use and sell throughout the world, other than in the U.S. and Japan, air impingement ovens of the above-described dimensions for commercial food applications. This sublicense covers the foreign analogues of the patents covered by the Enersyst license and grants Middleby Marshall rights of first refusal for a similar sublicense in Japan. The Enersyst license expires the later of the expiration of the last of the licensed patents or September 30, 2008. The Lincoln sublicense expires upon the expiration of the last patented improvement covered by the license. Certain individual patents covered under the Enersyst and Lincoln license agreements expire at varying dates through 2008. While the loss of the Enersyst license or the Lincoln sublicense could have an adverse effect on the company, management believes it is capable of designing, manufacturing and selling similar equipment, although not as technologically advanced. Lincoln and Fuji Chubo Setsubi company, Ltd. are the only other foodservice equipment manufacturers licensed under the Enersyst patents.

- 9 -

Employees

        As of December 28, 2002, the company employed 1,042 persons. Of this amount, 393 were management, administrative, sales, engineering and supervisory personnel; 425 were hourly production non-union workers; and 224 were hourly production union members. Included in these totals were 204 individuals employed outside of the United States, of which 142 were management, sales, administrative and engineering personnel, and 62 were hourly production workers, who participate in an employee cooperative. At its Elgin, Illinois facility, the company has a union contract with the International Brotherhood of Teamsters that expires on May 1, 2007. The company also has a union workforce at its manufacturing facility in the Philippines, under a contract that extends through June 2006. Management believes that the relationships between employees, union and management are good.

Seasonality

        The company’s business, taken as a whole, is not materially affected by seasonality.

- 10 -

        The company’s principal executive offices are located in Elgin, Illinois. The company operates four manufacturing facilities in the U.S. and one manufacturing facility in the Philippines.

        The principal properties of the company utilized by the Cooking Systems Group segment to conduct business operations are listed below:

        At various other locations the company leases small amounts of office space for administrative and sales functions, and in certain instances limited short-term inventory storage. These locations are in China, Korea, Mexico, Spain, Taiwan and the United Kingdom.

        Management believes that these facilities are adequate for the operation of the company’s business as presently conducted.

        The company also has three leased facilities, which were exited as part of the company’s manufacturing consolidation efforts. These leases extend through periods ending in December 2014. It is the company’s intent to sublease these facilities.

        The company is routinely involved in litigation incidental to its business, including product liability actions, which are generally covered by insurance or by indemnification from Maytag Corporation. Such routine claims are vigorously contested and management does not believe that the outcome of any such pending litigation will have a material adverse effect upon the financial condition, results of operations or cash flows of the company.

- 11 -

Item 4. Submission of Matters to a Vote of Security Holders

        No matters were submitted to a vote of the security holders in the fourth quarter of the year ended December 28, 2002.

        The officers of the company are elected annually by the Board of Directors, hold office until their successors are chosen and qualify, and may be removed by the Board of Directors at any time, at a duly convened meeting of the Board of Directors or by written consent. The company has employment agreements with Mssrs. Whitman, Bassoul and Baker. Laura B. Whitman, a director of the company, is the daughter of Mr. Whitman.

- 12 -

PART II

        The company’s Common Stock trades on the Nasdaq National Market System under the symbol “MIDD”. The following table sets forth, for the periods indicated, the high and low closing sale prices per share of Common Stock, as reported by the Nasdaq National Market System.

        In July 1998, the company’s Board of Directors adopted a stock repurchase program and subsequently authorized the purchase of up to 1,800,000 common shares in open market purchases. As of December 28, 2002, 936,865 shares had been repurchased under the stock repurchase program.

        In November 2000, the company completed a self tender offer. The company purchased a total 1,135,359 shares through the tender for approximately $7.9 million. At December 28, 2002, the company had a total of 2,002,474 shares in treasury amounting to $11.7 million. The company estimates there were approximately 1,800 beneficial owners of the company’s common stock as of December 28, 2002.

        In December 2000, the company declared and paid a $0.10 per common share special dividend to shareholders of record as of the close of business on December 20, 2000. The company’s senior bank agreement places certain limitations on its right to issue dividends.

        In December 2002, the company repurchased and retired 358,346 of outstanding stock warrant rights held by American Capital Strategies (“ACS”), which had been issued in connection with a senior subordinated note agreement entered into in December 2001. The stock warrant rights allowed ACS to purchase Middleby common stock at $4.67 per share at any time through their expiration on December 21, 2011. The stock warrant rights were purchased for $2.7 million in cash. Conditional stock warrant rights of 445,100 exercisable under circumstances defined per the note agreement expired with the retirement of the notes in December 2002.

- 13 -

PART II

(amounts in thousands, except per share data)
Fiscal Year Ended(1)

- 14 -

Subsequent Event

        See Note 15 to the consolidated financial statements for explanation of subsequent event.

Acquisition

        On December 21, 2001, the company completed its acquisition of Blodgett Holdings, Inc. (“Blodgett”) from Maytag Corporation.

        The company has accounted for this business combination using the purchase method to record a new cost basis for the assets acquired and liabilities assumed. The difference between the purchase price and the fair value of the assets acquired and liabilities assumed was recorded as goodwill. Under Statement of Financial Accounting Standards (“SFAS”) No. 142, “Goodwill and Other Intangible Assets”, goodwill and certain other intangible assets with indefinite lives acquired in conjunction with the Blodgett acquisition will be subject to the nonamortization provisions of this statement from the date of acquisition.

        The consolidated financial statements for fiscal 2001 include the operating results and the financial position of Blodgett for the period subsequent to its acquisition on December 21, 2001. The results of operations prior to and including December 21, 2001 are not reflected in the consolidated statements of earnings.

Informational Note

        This report contains forward-looking statements subject to the safe harbor created by the Private Securities Litigation Reform Act of 1995. The company cautions readers that these projections are based upon future results or events and are highly dependent upon a variety of important factors which could cause such results or events to differ materially from any forward-looking statements which may be deemed to have been made in this report, or which are otherwise made by or on behalf of the company. Such factors include, but are not limited to, volatility in earnings resulting from goodwill impairment losses which may occur irregularly and in varying amounts; variability in financing costs; quarterly variations in operating results; dependence on key customers; international exposure; foreign exchange and political risks affecting international sales; changing market conditions; the impact of competitive products and pricing; the timely development and market acceptance of the company’s products; the availability and cost of raw materials; and other risks detailed herein and from time-to-time in the company’s Securities and Exchange Commission filings, including those discussed under “Risk Factors” further below in this item.

- 15 -

NET SALES SUMMARY
(dollars in thousands)

Results of Operations

        The following table sets forth certain items in the consolidated statements of earnings as a percentage of net sales for the periods presented:

- 16 -

Fiscal Year Ended December 28, 2002 as Compared to December 29, 2001

        Net sales. Net sales in fiscal 2002 increased from $101.6 million in fiscal 2001 to $229.1 million in fiscal 2002. The increase in net sales resulted from the incremental business associated with the acquired Blodgett operations. On a proforma basis, net sales for combined Middleby and Blodgett increased by $6.5 million or 2.9% as compared to $222.6 million in 2001.

        Net sales at the Cooking Systems Group amounted to $218.1 million in 2002 as compared to $93.7 million in the prior year. Core cooking equipment sales increased to $154.8 million as compared to $37.0 million, primarily due to the addition of the acquired Blodgett product lines which accounted for $117.2 million of the net change. Excluding the acquired product lines, core product sales increased by $0.6 million due to market share gains. Conveyor oven equipment sales amounted to $47.5 million as compared to $40.8 million in the prior year, including an increase of $6.9 million associated with the acquired product lines. Counterline cooking equipment net sales remained stable at $11.0 million in fiscal 2002 as compared to $11.1 million in the prior year. International specialty equipment sales of $4.8 million were constant with the prior year.

        Net sales at the International Distribution Division increased to $35.7 million in 2002 compared to $21.4 million in 2001, due in part to the addition of Frialator International – a distribution operation in the United Kingdom, which was acquired as part of the Blodgett purchase. Net sales of Frialator International in fiscal 2002 amounted to $8.9 million. Excluding the impact of Frialator International, the sales of this division increased by $5.4 million, primarily due to the revenues associated with the acquired product lines which began to be distributed through this division late in the first quarter of 2002.

        Gross profit. Gross profit increased to $78.5 million in fiscal 2002 from $31.5 million in the prior year as a result of the increased sales volumes resulting from the acquisition. As a percentage of net sales, the gross margin rate increased to 34.3% in fiscal 2002 as compared to 31.0% in the prior year. The increase in the overall gross margin rate is largely attributable to an improved cost structure and a greater leverage resulting from the increased volume associated with the acquisition. As part of the cost structure improvements, the company consolidated manufacturing for several Blodgett product lines into existing manufacturing operations, enabling the company to exit two production facilities during the second quarter of 2002. The prior year gross profit was also impacted by a $0.9 million write-down of inventory recorded in the fourth quarter associated with the acquired Blodgett inventories.

        Selling, general and administrative expenses. Selling, general and administrative expenses increased to $48.8 million in 2002 from $23.6 million in 2001.

        Selling and distribution expenses increased to $28.2 million in 2002 from $13.2 million in 2001. The increased expense reflects the incremental cost associated with the acquired Blodgett operations. As a percentage of net sales selling and distribution expenses were 12.3% in fiscal 2002 as compared to 13.0% in fiscal 2001, reflecting the greater leverage of sales and marketing costs over a larger combined sales base.

- 17 -

        General and administrative expenses increased to $20.6 million in 2002 from $10.4 million in 2001, also reflecting the impact of the additional costs associated with the acquisition. As a percentage of net sales general and administrative expenses, were 9.0% in 2002 as compared to 10.2% in 2001. The reduction in general and administrative expense percentage reflects greater leverage of costs over the increased sales base. Additionally, goodwill amortization decreased by $0.8 million, or 0.8% of net sales due to the adoption of SFAS No. 142 “Goodwill and Other Intangible Assets”, which requires goodwill and intangible assets with indefinite lives no longer be amortized, but evaluated for impairment based upon financial tests related to the current value for the related assets.

        Income from operations. Income from operations increased $21.8 million to $29.7 million in fiscal 2002 from $7.9 million in fiscal 2001. The increase in operating income reflects the higher net sales and gross profit levels offset in part by increased selling and general and administrative expenses.

        Non-operating expenses. Non-operating expenses increased to $11.8 million in fiscal 2002 from $1.5 million in fiscal 2001. Net interest expense increased by $10.4 million to $11.2 million as a result of increased interest expense associated with the debt incurred to finance the Blodgett acquisition. The gain on acquisition related financing derivatives amounted to $0.3 million in 2002, relating to a $0.6 million gain on stock warrant rights that were retired in December 2002 in conjunction with the company’s debt refinancing, offset in part by $0.3 million in unrealized losses on an interest rate swap agreement. Other expenses, which are primarily comprised of foreign exchange losses, increased by $0.1 million to $0.9 million during the year.

        Income taxes. The company recorded a net tax provision of $6.3 million in fiscal 2002 at an effective rate of 35.2%. The effective tax rate reflects a $1.7 million one-time tax benefit related to the write-off of an investment in the company’s foreign subsidiary in Japan. In 2001, the company recorded a net tax provision of $4.8 million at an effective rate of 74.4%, which reflected the impact of foreign losses with no recorded tax benefit and a provision associated with state tax assessments.

        Extraordinary loss. As a result of the early retirement of the company’s senior bank facility and senior subordinated note, the company recorded an extraordinary charge in the fourth quarter of 2002 amounting to $5.5 million, net of tax. The extraordinary charge included the write-down of $5.3 million in deferred financing costs, $2.8 million of a debt discount associated with the subordinated senior note, and a $1.0 million prepayment penalty associated with the retired debt, net of a $3.6 million tax benefit.

- 18 -

Fiscal Year Ended December 29, 2001 as Compared to December 30, 2000

        Net sales. Net sales in fiscal 2001 decreased 20.0% from $126.9 million in fiscal 2000 to $101.6 million in fiscal 2001.

        Net sales of the Cooking Systems Group decreased 17.4% from $113.4 million in fiscal 2000 to $93.7 million in fiscal 2001. Sales of conveyor oven equipment decreased by $11.1 million or 21.5%. The decrease in conveyor oven sales is attributable to lower sales to the major pizza chains as the rate of store openings for certain major customers slowed. Core cooking equipment sales decreased $7.2 million or 16.2% and counterline cooking equipment sales decreased $1.3 million or 10.9% as a result of the general slowdown in the economy and competitive pricing pressures. Sales of international specialty equipment remained consistent with the prior year.

        Net sales of the company’s International Distribution Division, Middleby Worldwide, decreased 38.0% from $34.4 million in 2000 to $21.4 million in 2001. The sales decrease was primarily due to slowed store openings of the major pizza chains in the international markets, the effect of weaker foreign currencies resulting in lower U.S. revenues, and the impact of the general slowdown in the global economies.

        Gross profit. Gross profit decreased from $45.2 million in fiscal 2000 to $31.5 million in fiscal 2001. As a percentage of net sales, gross profit margin decreased from 35.6% in 2000 to 31.0% in 2001. The gross profit dollars decreased due to the lower sales volumes both at the Cooking Systems Group and the International Distribution Division. The gross margin was also impacted by inventory write-downs of $0.9 million for certain product offerings to be discontinued in connection with the Blodgett acquisition. The decrease in the gross profit margin percentage reflects lower production efficiencies resulting from the decline in production volume and the impact of the inventory write-down.

        Selling, general and administrative expenses. Selling, general and administrative expenses decreased from $33.3 million in 2000 to $23.6 million in 2001.

        Selling and distribution expenses decreased by $2.7 million or 16.9%, from $15.9 million in 2000 to $13.2 million in 2001. Selling and distribution expenses at the International Distribution Division were lower due to reduced payroll related costs resulting from office closures in 2000 and 2001. Expenses were also lower at the Cooking Systems Group due to reduced payroll related costs and commissions expense.

        General and administrative expenses decreased by $7.1 million or 40.6%, from $17.5 million in 2000 to $10.4 million in 2001. General and administrative expenses were lower at both the Cooking Systems Group and the International Distribution Division due to cost reduction measures, which included the closure of certain international sales administration offices and general headcount reductions to adjust staffing to lower sales volumes. Expenses associated with employee benefit and compensation programs, including incentive compensation and retirement benefits also decreased from the prior year. In 2000, general and administrative expenses included $1.5 million associated with the early retirement of the company’s President and Chief Executive Officer and approximately $0.5 million of closure costs for several administrative offices and the exit of the related leases.

- 19 -

        Income from operations. Income from operations decreased $3.9 million to $7.9 million in fiscal 2001 from $11.9 million in fiscal 2000. The decrease in operating income reflects the lower net sales and gross profit levels offset in part by decreased selling and general and administrative expenses.

        Non-operating expenses. Non-operating expenses decreased from $2.7 million in fiscal 2000 to $1.5 million in fiscal 2001. Net interest expense declined by $0.5 million to $0.7 million as a result of lower average debt balances and interest income on higher cash balances held during the year. Other expenses decreased by $0.7 million to $0.8 million during the year as a result of lower foreign exchange losses.

        Income taxes. The company recorded a net tax provision of $4.8 million in fiscal 2001 at an effective rate of 74.4%. The effective tax rate reflects foreign losses with no recorded tax benefit and provisions recorded for state tax assessments. In 2000 the company recorded a net tax provision of $5.4 million at an effective rate of 58.7%, which also reflects the impact of foreign losses with no recorded tax benefit.

Financial Condition and Liquidity

        Total cash and cash equivalents increased by $2.4 million to $8.4 million at December 28, 2002 from $6.0 million at December 29, 2001. Net borrowings decreased from $96.2 million at December 29, 2001 to $88.0 million at December 28, 2002.

        Operating activities. Net cash provided by operating activities was $19.5 million as compared to net cash provided of $13.9 million in the prior year. Adjustments required to reconcile net earnings to net operating cash included $8.1 million of non-cash debt extinguishments costs that were recorded as a component of the extraordinary loss in the fourth quarter of 2002. This charge consisted of a $5.3 million write-off of deferred financing costs and a $2.8 million write-off of a debt discount associated with the retired debt. Cash provided by operating activities also included $2.3 of borrowings on seller notes representing unpaid interest, which is added to the principal balance of the notes consistent with the purchase agreement. Changes in assets and liabilities included an increase in accounts receivable of $2.7 million due to the higher sales volume. Inventories decreased $1.7 million due to inventory reduction initiatives. Accounts payable increased by $2.0 million due to increased inventory purchases on higher volumes and management of vendor payments to enhance cash flows. Accrued expenses and other liabilities decreased by $3.2 million due to the payment of severance obligations associated with restructuring initiatives and payment of acquisition costs accrued in the prior year.

        Investing activities. During 2002 net cash used for investing activities amounted to $1.1 million of property additions during the year for enhancements to existing manufacturing facilities. This included expenditures required to consolidate the production for several product lines that were moved from two manufacturing facilities closed during the second quarter.

- 20 -

        Financing activities. Net cash used in financing activities amounted to $16.1 million in 2002. This included the repayment of $25.0 million of subordinated senior notes that was assessed interest at a rate of 15.5%. The repayment of these notes was funded by cash flows from operating activities and borrowings under an expanded senior bank facility.

        On December 23, 2002, the company entered into a $95.0 million senior bank facility. This facility includes $65.0 million in term loans repayable in quarterly installments maturing in December 2007 and a $30.0 million revolving credit facility also maturing in December 2007. Also in December 2002, the company’s subsidiary in Spain entered into a US dollar senior bank loan for $2.4 million maturing in December 2003. Borrowings under the senior bank facilities established in December 2002 were utilized to fully retire and replace the $68.0 million senior bank facility established in December 2001 and retire principal and interest due under the company’s subordinated senior note with American Capital Strategies. The warrants associated with the subordinated senior note were also repurchased and retired for $2.7 million. As of December 28, 2002, the company had aggregate borrowings under its senior bank agreement of $65.0 million.

        The $30.0 million revolving credit facility includes $15.0 million available for working capital needs and a conditional $15.0 million facility with restricted use for the repayment of notes to Maytag. The conditional $15.0 million revolving credit facility becomes available after June 28, 2003 if the company remains in compliance with representations, warranties and covenants of the bank agreement and meets certain required levels of Earnings Before Interest, Taxes, Depreciation and Amortization (“EBITDA”) and ratios of debt to EBITDA, as defined per the agreement. Availability under the aggregate $30.0 million revolving credit facility is limited to the amount of collateral as defined by the senior bank agreement, which amounted to $14.2 million as of December 28, 2002. In addition, after giving effect to payment of notes to Maytag, if such a payment were to occur, the revolving availability is required to be greater than the revolving borrowings by at least $7,500,000. There were no borrowings under the revolving credit facility at year-end.

        As of December 28, 2002 the company had $20.6 million in notes due to Maytag. The notes due to Maytag mature in December 2006 and consist of $13.7 million in notes that bear an interest rate of 12.0% and $6.9 million in notes that bear an interest rate of 13.5% through December 31, 2004 and 12.0% thereafter.

        The terms of the senior secured credit facility and subordinated note to Maytag limit the paying of dividends, capital expenditures and leases, and require, among other things, a minimum amount, as defined, of stockholders’ equity, and certain ratios of indebtedness and fixed charge coverage. The credit agreement also provides that if a material adverse change in the company’s business operations or conditions occurs, the lender could declare an event of default. Under terms of the agreement a material adverse effect is defined as (a) a material adverse change in, or a material adverse effect upon, the operations, business properties, condition (financial and otherwise) or prospects of the company and its subsidiaries taken as a whole; (b) a material impairment of the ability of the company to perform under the loan agreements and to avoid any event of default; or (c) a material adverse effect upon the legality, validity, binding effect or enforceability against the company of any loan document. At December 28, 2002, the company was in compliance with all covenants pursuant to its borrowing agreements.

- 21 -

        Management believes that the company will have sufficient financial resources available to meet its anticipated requirements for working capital, capital expenditures and debt obligations for the foreseeable future.

Contractual Obligations

        The company’s contractual cash payment obligations are set forth below (dollars in thousands):

        Idle facility leases consist of obligations for three manufacturing locations that were exited in conjunction with the company’s manufacturing consolidation efforts. The lease obligations continue through December 2014. The obligations presented above do not reflect any anticipated sublease income from the facilities.

Related Party Transactions

        On November 8, 1999 the company entered into a loan with its Chief Executive Officer, in the amount of $434,250. The loan was repayable with interest of 6.08% on February 28, 2003 and was established in conjunction with 100,000 shares of common stock purchased at the market price by the company on behalf of the officer. In accordance with a special incentive agreement with the officer, the loan and the related interest was to be forgiven by the company if certain targets of Earnings Before Taxes for fiscal years 2000, 2001 and 2002 were achieved. As of December 28, 2002, the entire loan had been forgiven as the financial targets established by the special incentive agreement had been achieved. One-third of the principal loan amount had been forgiven in fiscal 2000 and the remaining two-thirds was forgiven in fiscal 2002.

        A second loan was entered into on March 1, 2001 in the amount of $300,000 and is repayable with interest of 6.0% on February 24, 2004. This loan was established in conjunction with the company’s commitment to transfer 50,000 shares of common stock from treasury to the officer at $6.00 per share. The market price at the close of business on March 1, 2001 was $5.94 per share. In accordance with a special incentive agreement with the officer, the loan will be forgiven by the company if certain targets of Earnings Before Taxes for fiscal years 2001, 2002, and 2003 are achieved. As of December 28, 2002, one-third of the principal loan amount had been forgiven for the achievement of the defined targets in fiscal 2002. Amounts forgiven were recorded in general and administrative expense.

- 22 -

Critical Accounting Policies and Estimates

        Management’s discussion and analysis of financial condition and results of operations are based upon the company’s consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires the company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses as well as related disclosures. On an ongoing basis, the company evaluates its estimates and judgments based on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or conditions.

        Property and equipment. Property and equipment are depreciated or amortized on a straight-line basis over their useful lives based on management’s estimates of the period over which the assets will utilized to benefit the operations of the company. The useful lives are estimated based on historical experience with similar assets, taking into account anticipated technological or other changes.  The company periodically reviews these lives relative to physical factors, economic factors and industry trends. If there are changes in the planned use of property and equipment or if technological changes were to occur more rapidly than anticipated, the useful lives assigned to these assets may need to be shortened, resulting in the recognition of increased depreciation and amortization expense in future periods.

        Long-lived assets. Long-lived assets (including goodwill and other intangibles) are reviewed for impairment annually and whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. In assessing the recoverability of the company’s long-lived assets, the company considers changes in economic conditions and makes assumptions regarding estimated future cash flows and other factors.  Estimates of future cash flows are judgments based on the company’s experience and knowledge of operations.  These estimates can be significantly impacted by many factors including changes in global and local business and economic conditions, operating costs, inflation, competition, and consumer and demographic trends.  If the company’s estimates or the underlying assumptions change in the future, the company may be required to record impairment charges.

        Warranty. In the normal course of business the company issues product warranties for specific product lines and provides for the estimated future warranty cost in the period in which the sale is recorded.  The estimate of warranty cost is based on contract terms and historical warranty loss experience that is periodically adjusted for recent actual experience. Because warranty estimates are forecasts that are based on the best available information, claims costs may differ from amounts provided. Adjustments to initial obligations for warranties are made as changes in the obligations become reasonably estimable.

- 23 -

        Lease Obligations. In 2002 and 2001, the company established reserves associated with lease obligations for three manufacturing facilities that were exited in conjunction with manufacturing consolidation efforts related to the acquisition of Blodgett.  The term of the lease associated with one of the three facilities in Williston, Vermont extends through June 2005.  The terms of the leases associated with the other two facilities in Shelburne, Vermont and Quakertown, Pennsylvania extend through December 2014.  The company currently has a sublessor for the Quakertown, Pennsylvania facility for a portion of the lease term. The company is actively searching for sublessors for the other two facilities.  The recorded reserves are established for the future lease obligations net of an estimate for anticipated sublease income.  The forecast of sublease income could differ from actual amounts, which are subject to the occupancy by a subtenant and a negotiated sublease rental rate.  If the company’s estimates or underlying assumptions change in the future, the company would be required to adjust the reserve amount accordingly.

        Litigation. From time to time, the company is subject to proceedings, lawsuits and other claims related to products, suppliers, employees, customers and competitors. The company maintains insurance to cover product liability, workers compensation, property and casualty, and general liability matters.  The company is required to assess the likelihood of any adverse judgments or outcomes to these matters as well as potential ranges of probable losses.  A determination of the amount of accrual required, if any, for these contingencies is made after assessment of each matter and the related insurance coverage.  The required accrual may change in the future due to new developments or changes in approach such as a change in settlement strategy in dealing with these matters.  The company does not believe that any such matter will have a material adverse effect on its financial condition or results of operations.

        Income taxes. The company operates in numerous taxing jurisdictions where it is subject to various types of tax, including sales tax and income tax.  The company’s tax filings are subject to audits and adjustments. Because of the nature of the company’s operations, the nature of the audit items can be complex, and the objectives of the government auditors can result in a tax on the same transaction or income in more than one state or country.  As part of the company’s calculation of the provision for taxes, the company establishes reserves for the amount that it expects to incur as a result of audits. The reserves may change in the future due to new developments related to the various tax matters.

New Accounting Pronouncements

        In June 2001, the Financial Accounting Standards Board issued SFAS No. 141 “Business Combinations”. This statement addresses financial accounting and reporting for business combinations initiated after June 30, 2001, superceding Accounting Principles Board (“APB”) Opinion No. 16 “Business Combinations” and SFAS No. 38 “Accounting for Preacquisition Contingencies of Purchased Enterprises”. All business combinations in the scope of this statement are to be accounted for using the purchase method of accounting. The company has accounted for its acquisition of Blodgett Holdings, Inc. (“Blodgett”) in accordance with SFAS No. 141.

- 24 -

        In June 2001, the FASB issued SFAS No. 142 “Goodwill and Other Intangible Assets”, superceding APB Opinion No. 17, “Intangible Assets”. This statement addresses how intangible assets that are acquired individually or with a group of other assets (excluding assets acquired in a business combination) should be accounted for in financial statements upon their acquisition. This statement also addresses how goodwill and other intangible assets should be accounted for after they have been initially recognized in the financial statements. In accordance with this statement, goodwill and certain other intangible assets with indefinite lives will no longer be amortized, but evaluated for impairment based upon financial tests related to the current value for the related assets. As a result there may be more volatility in reported income than under the previous standards because impairment losses are likely to occur irregularly and in varying amounts. The company adopted this statement in the first quarter of 2002. Upon initial adoption of this statement, the company determined that no impairment of goodwill or other intangible assets had occurred. As of December 28, 2002 the company does not have any intangible assets subject to amortization. The company recorded goodwill amortization, which reduced net income by $0.9 million from $2.5 million, or $0.28 per share in fiscal 2001 and $0.9 million from $4.4 million, or $0.44 per share in fiscal 2000.

        In June 2001, the FASB issued SFAS No. 143 “Accounting for Asset Retirement Obligations”. This statement addresses financial accounting and reporting obligations associated with the retirement of tangible long-lived assets and the associated asset retirement costs, and requires that such costs be recognized as a liability when the recognition criteria in FASB Concepts Statement No. 5 “Recognition and Measurement in the Financial Statements of Business Enterprises” are met. This statement is effective for financial statements issued for fiscal years beginning after June 15, 2002. The company does not expect the adoption of this statement to have a material impact to the financial statements.

        In August 2001, the FASB issued SFAS No. 144, “Accounting for the Impairment or Disposal of Long-Lived Assets.” SFAS No. 144 supercedes SFAS No. 121 and requires that one accounting model be used for long-lived assets to be disposed of by sale, whether previously held and used or newly acquired and by broadening the presentation of discontinued operations to include more disposal transactions. This statement is effective for financial statements issued for fiscal years beginning after December 15, 2001. The adoption of SFAS No. 144 did not have a material impact on the company’s financial position, results of operations or cash flows.

        In April 2002, the FASB issued SFAS 145, “Rescission of FASB Statements SFAS 4, 44 and 64, Amendment of FASB Statement No. 13 and Technical Corrections”. SFAS No. 145 eliminates the current requirement that gains and losses on debt extinguishment must be classified as extraordinary items in the income statement. Instead, such gains and losses will be classified as extraordinary items only if they are deemed to be unusual and infrequent. The changes related to debt extinguishment will be effective for fiscal years beginning after May 15, 2002, and the changes related to lease accounting will be effective for transactions occurring after May 15, 2002. The company will apply this guidance beginning in fiscal 2003.

- 25 -

        In June 2002, the FASB issued SFAS No. 146, “Accounting for Costs Associated with Exit or Disposal Activities”. This statement requires recording costs associated with exit or disposal activities at their fair values when a liability has been incurred. Under previous guidance, certain exit costs were accrued upon management’s commitment to an exit plan, which is generally before an actual liability has been incurred. This statement is effective for financial statements issued for fiscal years beginning after December 31, 2002. The company will apply this guidance prospectively.

        In December 2002, the FASB issued SFAS No. 148, “Accounting for Stock-Based Compensation-Transition and Disclosure–an amendment of FASB Statement No. 123.” This statement amends SFAS No. 123 to provide alternative methods of transition for voluntary change to the fair value based method of accounting for stock-based employee compensation and amends the disclosure requirements to require prominent disclosures in both annual and interim financial statements about the method of accounting for stock-based employee compensation and the effect of the method used on reported results. The company will apply this guidance prospectively.

Certain Risk Factors That May Affect Future Results

        Future transactions. The company periodically reviews potential transactions related to products or product rights and businesses complementary to its business. Such transactions could include mergers, acquisitions, or licensing agreements. In the future, the company may choose to enter into such transactions at any time. The impact of transactions on the market price of a company’s stock is often uncertain, but may cause substantial fluctuations to the market price. Consequently, you should be aware that any announcement of any such transaction could have a material adverse effect upon the market price of Middleby’s common stock. Moreover, depending upon the nature of any transaction, the company may experience a charge to earnings, which could be material, and could possibly have an adverse impact upon the market price of Middleby common stock.

        Financing related exposure. The company has significant debt, which it incurred in conjunction with the Blodgett acquisition. A portion of this debt is subject to fluctuation in interest rates, which could have a negative impact on the company’s interest costs. Additionally, terms of the senior bank agreement limit the paying of dividends, capital expenditures and leases, and require, among other things, a minimum amount, as defined, of stockholders’ equity, certain ratios of indebtedness and fixed charge coverage. Noncompliance by the company to satisfy any one of these requirements could result in a significant increase in the company’s financing costs and have a material adverse impact to the company’s financial results and condition. The financing agreements also provide that if a material adverse change in the company’s business operations or conditions occurs, the lender could declare an event of default. Under terms of the agreement a material adverse effect is defined as (a) a material adverse change in, or a material adverse effect upon, the operations, business properties, condition (financial and otherwise) or prospects of the company and its subsidiaries taken as a whole; (b) a material impairment of the ability of the company to perform under the loan agreements and to avoid any event of default; or (c) a material adverse effect upon the legality, validity, binding effect or enforceability against the company of any loan document.

- 26 -

        Quarterly variations in operating results. Results of the company’s operations have fluctuated from quarter to quarter in the past, and may fluctuate significantly in the future. Such fluctuations may result from a variety of factors, including the timing of orders from major customers, the timing of new product introductions, the loss of any of its significant customers or distributors, currency fluctuations, disruption in the supply of components for the company’s products, changes in product mix or capacity utilization, personnel changes, production delays, seasonality, general economic conditions and other factors affecting sales and results of operations.

        International exposure. The company has manufacturing operations located in Asia and distribution operations in Asia, Europe, and Latin America. The company’s operations are subject to the impact of economic downturns, political instability, and foreign trade restrictions, which may adversely affect the financial results. The company anticipates that international sales will continue to account for a significant portion of consolidated net sales in the foreseeable future. Some sales by the foreign operations are in local currency and an increase in the relative value of the U.S. dollar against such currencies would lead to the reduction in consolidated sales and earnings. Additionally, foreign currency exposures are not fully hedged and there can be no assurances that the company’s future results of operations will not be adversely affected by currency fluctuations.

        Dependence on key customers. The company’s growth is strongly influenced by the growth of its key customers, many of which are large restaurant chains. The number of new store openings by these chains can vary from quarter to quarter depending on internal growth plans, construction, seasonality and other factors. If these chains were to conclude that the market for their type of restaurant had become saturated, they could open fewer restaurants. In addition, during an economic downturn, key customers could both open fewer restaurants and defer purchases of new equipment for existing restaurants. Either of these conditions could have a material adverse effect on the company’s future results of operations.

        Competition. The cooking and warming segment of the foodservice equipment industry is highly competitive and fragmented. Within a given product line, the industry remains fairly concentrated, with typically a small number of competitors accounting for the bulk of the industry-wide sales. Industry competition includes companies that manufacture a broad line of commercial foodservice equipment products and those that specialize in a particular product line. Some of the company’s competitors have greater financial and marketing resources than the company. In addition, some competitors have different pricing structures and may be able to deliver their products at lower prices. Although the company believes that the performance and price characteristics of its products will provide competitive solutions for its customers’ needs, there can be no assurance that its customers will choose the company’s products over products offered by competitors. Further, the market for the company’s products is characterized by changing technology and evolving industry standards. The company is aware of other companies that are developing, and in some cases have introduced, new equipment based on high-speed heating methods and technologies. Accordingly, the company’s ability to compete successfully will depend, in large part, on its ability to enhance and improve its existing products.

- 27 -

        Product liability matters. The company is engaged in a business that could expose it to possible liability claims from others, including foodservice operators and their staff, as well as from consumers, for personal injury or property damage due to alleged design or manufacturing defects in the company’s products. The company maintains an umbrella liability insurance policy to cover claims up to $15 million per occurrence. There can be no assurance, however, that the company’s insurance will be sufficient to cover potential claims or that an adequate level of coverage will be available in the future at reasonable cost. A partially insured or a completely uninsured successful claim against the company could have a material adverse effect on the company.

        Risks relating to intellectual property. The company holds numerous patents covering technology and applications related to various products, equipment and systems, and numerous trademarks and trade names registered with the U.S. Patent and Trademark Office and in various foreign countries, including the names Blodgett, Blodgett Combi, Blodgett Range, CTX, MagiKitch’n, Middleby Marshall, Pitco Frialator, Southbend, SteamMaster, and Toastmaster. There can be no assurance as to the breadth or degree of protection that existing or future patents or trademarks may afford the company.

        Dependence on key personnel. The company depends significantly on certain of its executive officers and certain other key personnel, many of whom could be difficult to replace. The incapacity, inability or unwillingness of certain of these people to perform their services may have a material adverse effect on the company. There can be no assurance that the company will be able to continue to attract, motivate and retain personnel with the skills and experience needed to successfully manage the company’s business and operations.

- 28 -

Interest Rate Risk

        The company is exposed to market risk related to changes in interest rates. The following table summarizes the maturity of the company’s debt obligations:

        On December 23, 2002, the company entered into a $95.0 million senior bank facility. This facility includes $65.0 million in term loans repayable in quarterly installments maturing in December 2007 and a $30.0 million revolving credit facility also maturing in December 2007. Also in December 2002, the company’s subsidiary in Spain entered into a US dollar senior bank loan for $2.4 million maturing in December 2003. Borrowings under the senior bank facilities established in December 2002 were utilized to fully retire and replace the $68.0 million senior bank facility established in December 2001 and retire $25.0 million of principal and interest due under the company’s subordinated senior note with American Capital Strategies.

        As a result of the early retirement of debt the company recorded an extraordinary charge in the fourth quarter of 2002 amounting to $5.5 million, net of tax. The extraordinary charge included a write-down of $5.3 million in deferred financing costs, $2.8 million of a debt discount associated with the subordinated senior note, and a $1.0 million prepayment penalty associated with the retired debt, net of a $3.6 million tax benefit.

        As of December 28, 2002, the company had aggregate borrowings under its senior bank agreement of $65.0 million. Year-end borrowings included a $60.0 million term loan assessed interest at floating rates of 3.25% above LIBOR and a $5.0 million term loan assessed interest at a rate of 3.75% above LIBOR. At December 28, 2002, the interest rate on the $60.0 million and $5.0 million term loans were 4.67% and 5.17%, respectively. The interest rate on the $60.0 million term loan may be adjusted quarterly based on the company’s defined indebtedness ratio on a rolling four-quarter basis. The senior bank agreement also includes a $15.0 million revolving credit facility for working capital needs and a conditional $15.0 million revolving credit facility with restricted use for the repayment of notes to Maytag. The conditional $15.0 million revolving credit facility becomes available after June 28, 2003 if the company remains in compliance with representations, warranties and covenants of the bank agreement and meets certain required levels of Earnings Before Interest, Taxes, Depreciation and Amortization (“EBITDA”) and ratios of debt to EBITDA, as defined per the agreement. Availability under the aggregate $30.0 million revolving credit facility is limited to the amount of collateral as defined by the senior bank agreement, which amounted to $14.2 million as of December 28, 2002. In addition, after giving effect to payment of notes to Maytag, if such a payment were to occur, the revolving availability is required to be greater than the revolving borrowings by at least $7,500,000. Borrowings under the revolving credit facility are assessed interest at a rate of 3.25% above LIBOR, which was 4.67% at December 28, 2002. A variable commitment fee, based upon the indebtedness ratio, of 0.5% is charged on the unused portion of the line of credit.

- 29 -

        The senior bank facility entered into in December 2002 requires the company to have in effect one or more interest rate protection agreements effectively fixing the interest rates on not less than $20.0 million in principal amount for a period of not less than two years and $10.0 million in principal amount for a period of not less than three years. In January 2002, the company had established an interest rate swap agreement with a notional amount of $20.0 million. This agreement swaps one-month LIBOR for a fixed rate of 4.03% and is in effect through December 31, 2004. In February 2003, the company entered into another swap agreement with a notional amount of $10.0 million that swaps one-month LIBOR for a fixed rate of 2.36% and is in effect through December 30, 2005.

        As of December 28, 2002 the company’s subsidiary in Spain had $2.4 million in US dollar borrowings under a senior bank loan. This loan is amortized in equal monthly payments maturing on December 2003 and is assessed interest at a rate of .45% above LIBOR, which amounted to 1.87% at December 28, 2002.

        As of December 28, 2002 the company had $20.6 million in notes due to Maytag. The notes due to Maytag mature in December 2006 and consist of $13.7 million in notes that bear an interest rate of 12.0% payable in cash and $6.9 million in notes that bear an interest rate of 13.5% through December 31, 2004 and 12.0% thereafter. Interest prior to December 31, 2004 on the $6.9 million in notes is paid by the issuance of additional subordinated notes in principal amounts equal to such interest payable. After December 31, 2004 interest on these notes is payable in cash, unless such payment would result in the violation of the provisions within the Senior Bank Agreement. Interest on the Maytag notes is assessed semi-annually. The notes become immediately due upon the occurrence of certain material events without the written permission of Maytag, including a change in control, a business acquisition, the acceleration of the senior bank debt, or the issuance of additional debt. The company has the ability to prepay the notes to Maytag without penalty.

        The terms of the senior secured credit facility and subordinated note to Maytag limit the paying of dividends, capital expenditures and leases, and require, among other things, a minimum amount, as defined, of stockholders’ equity, and certain ratios of indebtedness and fixed charge coverage. The credit agreement also provides that if a material adverse change in the company’s business operations or conditions occurs, the lender could declare an event of default. Under terms of the agreement a material adverse effect is defined as (a) a material adverse change in, or a material adverse effect upon, the operations, business properties, condition (financial and otherwise) or prospects of the company and its subsidiaries taken as a whole; (b) a material impairment of the ability of the company to perform under the loan agreements and to avoid any event of default; or (c) a material adverse effect upon the legality, validity, binding effect or enforceability against the company of any loan document. At December 28, 2002, the company was in compliance with all covenants pursuant to its borrowing agreements.

- 30 -

Foreign Exchange Derivative Financial Instruments

        The company uses derivative financial instruments, principally foreign currency forward purchase and sale contracts with terms of less than one year, to hedge its exposure to changes in foreign currency exchange rates. The company’s primary hedging activities are to mitigate its exposure to changes in exchange rates on intercompany and third party trade receivables and payables. The company does not currently enter into derivative financial instruments for speculative purposes. In managing its foreign currency exposures, the company identifies and aggregates naturally occurring offsetting positions and then hedges residual balance sheet exposures. The following table summarizes the forward and option purchase contracts outstanding at December 28, 2002, the fair value of which was less than $0.1 million at the end of the year:

        The company accounts for its derivative financial instruments in accordance with SFAS No. 133, “Accounting for Derivative Instruments and Hedging Activities”, which was adopted in the first quarter of 2001. In accordance with SFAS No.133, as amended, these instruments are recognized on the balance sheet as either an asset or a liability measured at fair value. Changes in the market value and the related foreign exchange gains and losses are recorded in the statement of earnings.

- 31 -

All other schedules for which provision is made to applicable regulation of the Securities and Exchange Commission are not required under the related instruction or are inapplicable and, therefore, have been omitted.

- 32 -

REPORT OF INDEPENDENT PUBLIC ACCOUNTANTS

To the Stockholders and Board of Directors of
The Middleby Corporation

We have audited the accompanying consolidated balance sheets of The Middleby Corporation and Subsidiaries as of December 28, 2002 and December 29, 2001 and the related consolidated statements of earnings, stockholders’ equity, and cash flows for the years then ended. Our audits also included the financial statement schedule listed in the Index at Item 8, Part II for the years ended December 28, 2002 and December 29, 2001. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on the 2002 and 2001 financial statements and financial statement schedules based on our audits. The financial statements and financial statement schedule as of December 30, 2000 and for the year then ended, before the reclassifications discussed in Note 3 and inclusion of additional disclosures discussed in Note 4 to the financial statements, were audited by other auditors who have ceased operations. Those auditors expressed an unqualified opinion on those consolidated financial statements and stated that such 2000 financial statement schedule, when considered in relation to the 2000 basic financial statements taken as a whole, presented fairly, in all material respects, the information set forth therein, in their report dated March 21, 2002.

We conducted our audits in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of The Middleby Corporation and Subsidiaries as of December 28, 2002 and December 29, 2001, and the results of their operations and their cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such 2002 and 2001 financial statement schedules, when considered in relation to the basic 2002 and 2001 consolidated financial statements taken as a whole, present fairly in all material respects the information set forth therein.

- 33 -

As discussed above, the financial statements of The Middleby Corporation and Subsidiaries as of December 30, 2000 and for the year then ended, were audited by other auditors who have ceased operations. As described in Note 3, those financial statements have been revised to include additional disclosures relating to the components comprising cash, accounts payable, shareholder receivables and paid-in-capital. We audited the reclassifications described in Note 3 that were applied to revise the 2000 financial statements. Our procedures included (1) comparing the previously reported cash, accounts payable, shareholder receivable and paid-in-capital balances to previously issued financial statements, (2) comparing the cash, accounts payable, shareholder receivable and paid-in-capital balances to the Company’s underlying analysis obtained from management, and (3) testing the mathematical accuracy of the underlying analysis. In our opinion, such reclassifications are appropriate and have been properly applied. However, we were not engaged to audit, review or apply any procedures to the 2000 financial statements of the Company other than with respect to such reclassifications and, accordingly, we do not express an opinion or any other form of assurance on the 2000 financial statements taken as a whole.

As discussed in Note 4 to the financial statements, the Company changed its method of accounting for goodwill and other intangibles assets in 2002.

As discussed above, the financial statements of The Middleby Corporation and Subsidiaries as of December 30, 2000, and for the year then ended, were audited by other auditors who have ceased operations. As described in Note 4, these financial statements have been revised to include the transitional disclosures required by Statement of Financial Accounting Standards No. 142, “Goodwill and Other Intangible Assets,” which was adopted by the Company as of December 30, 2001. Our audit procedures with respect to the disclosures in Note 4 with respect to 2000 included (1) comparing the previously reported net income to the previously issued financial statements and the adjustments to reported net income representing amortization expense (including any related tax effects) recognized in those periods related to goodwill and intangible assets that are no longer being amortized to the Company’s underlying analysis obtained from management, and (2) testing the mathematical accuracy of the reconciliation of adjusted net income to reported net income and the related earnings-per-share amounts. In our opinion, the disclosures for 2000 in Note 4 are appropriate. However, we were not engaged to audit, review, or apply any procedures to the 2000 financial statements of the Company other than with respect to such disclosures and, accordingly, we do not express an opinion or any other form of assurance on the 2000 financial statements taken as a whole.

Deloitte & Touche LLP
Chicago, Illinois

March 7, 2003

        The following is a copy of the previously issued report of Arthur Andersen LLP, which has ceased operations and which report has not been reissued in connection with this Form 10-K, on the consolidated balance sheets of The Middleby Corporation, and subsidiaries at December 29, 2001 and December 30, 2000 and the related consolidated statements of earnings, changes in stockholders’ equity and cash flows for each of the three years in the period ended December 29, 2001. Arthur Andersen LLP reported on such financial statements prior to the reclassifications discussed in Note 3.

- 34 -

REPORT OF INDEPENDENT PUBLIC ACCOUNTANTS

To the Stockholders and Board of Directors
of The Middleby Corporation:

We have audited the accompanying consolidated balance sheets of THE MIDDLEBY CORPORATION (a Delaware corporation) and Subsidiaries as of December 29, 2001, and December 30, 2000, and the related consolidated statements of earnings, changes in stockholders’ equity and cash flows for each of the three years in the period ended December 29, 2001. These financial statements are the responsibility of the company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with auditing standards generally accepted in the United States. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

We conducted our audits in accordance with auditing standards generally accepted in the United States. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of The Middleby Corporation and Subsidiaries as of December 29, 2001, and December 30, 2000, and the results of its operations and its cash flows for each of the three years in the period ended December 29, 2001, in conformity with accounting principles generally accepted in the United States.

Our audits were made for the purpose of forming an opinion on the basic financial statements taken as a whole. The schedule listed in the index to the financial statements is presented for purposes of complying with the Securities and Exchange Commission’s rules and is not part of the basic financial statements. This schedule has been subjected to the auditing procedures applied in the audits of the basic financial statements and, in our opinion, fairly states in all material respects in relation to the basic financial statements taken as a whole.

Arthur Andersen LLP
Chicago, Illinois
March 21, 2002

- 35 -

THE MIDDLEBY CORPORATION AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS
DECEMBER 28, 2002 AND DECEMBER 29, 2001
(amounts in thousands, except share data)

The accompanying Notes to Consolidated Financial Statements
are an integral part of these consolidated financial statements.

- 36 -

THE MIDDLEBY CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF EARNINGS
FOR THE FISCAL YEARS ENDED DECEMBER 28, 2002, DECEMBER 29, 2001 AND
DECEMBER 30, 2000
(amounts in thousands, except per share data)

The accompanying Notes to Consolidated Financial Statements
are an integral part of these consolidated financial statements.

- 37 -

THE MIDDLEBY CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ EQUITY
FOR THE FISCAL YEARS ENDED DECEMBER 28, 2002, DECEMBER 29, 2001
AND DECEMBER 30, 2000
(amounts in thousands)

The accompanying Notes to Consolidated Financial Statements
are an integral part of these consolidated financial statements.

- 38 -

THE MIDDLEBY CORPORATION AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS
FOR THE FISCAL YEARS ENDED DECEMBER 28, 2002, DECEMBER 29, 2001
AND DECEMBER 30, 2000
(amounts in thousands)