Back to GetFilings.com





SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-K

(Mark One)

[ X ] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE
ACT OF 1934 FOR THE FISCAL YEAR ENDED DECEMBER 31, 2001.

[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES
EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM TO
------ ------

Commission file number 0-29416
-------

UNIFAB International, Inc.
- --------------------------------------------------------------------------------
(Exact name of registrant as specified in its charter)


Louisiana 72-1382998
- ---------------------------------------- -----------------------------------
(State or other jurisdiction (I.R.S. Employer
of incorporation or organization) Identification No.)


5007 Port Road
New Iberia, LA 70562
- ---------------------------------------- -----------------------------------
(Address of principal executive offices) (Zip Code)

(337) 367-8291
- --------------------------------------------------------------------------------
(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act: None



Securities registered pursuant to Section 12(g) of the Act: Common Stock, $0.01 par value per share
---------------------------------------
(Title of class)


Indicate by check mark whether the registrant (1) has filed all reports required
to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during
the preceding 12 months (or for such shorter period that the registrant was
required to file such reports), and (2) has been subject to such filing
requirements for the past 90 days.
Yes X No
----- -----

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405
of Regulation S-K (ss.229.405 of this chapter) is not contained herein, and will
not be contained, to the best of registrant's knowledge, in definitive proxy or
information statements incorporated by reference in Part III of this Form 10-K
or any amendment to this Form 10-K. X
---

The aggregate market value of the voting common equity held by nonaffiliates of
the registrant as of April 10, 2002 was approximately $6.3 million.

The number of shares outstanding of the registrant's common stock, $0.01 par
value per share, as of April 10, 2002 was 8,189,972.


1


DOCUMENTS INCORPORATED BY REFERENCE

Portions of our proxy statement to be filed in connection with our 2002 Annual
Meeting of Shareholders are incorporated by reference into Part III of this Form
10-K.





















2



TABLE OF CONTENTS

PAGE
----
PART I

Items 1 and 2. Business and Properties................................................. 1
Item 3. Legal Proceedings....................................................... 20
Item 4. Submission of Matters to a Vote of Security Holders..................... 20
Executive Officers of the Registrant.................................... 21
PART II
Item 5. Market for Registrant's Common Equity and Related Stockholder
Matters.............................................................. 22
Item 6. Selected Financial Data................................................. 23
Item 7. Management's Discussion and Analysis of Financial Condition
and Results of Operations............................................ 24
Item 7A. Quantitative and Qualitative Disclosures About Market Risk.............. 30
Item 8. Financial Statements and Supplementary Data............................. 31
Item 9. Changes in and Disagreements with Accountants on Accounting
and Financial Disclosure............................................. 31

PART III
Item 10. Directors and Executive Officers of the Registrant...................... 31
Item 11. Executive Compensation.................................................. 31
Item 12. Security Ownership of Certain Beneficial Owners and Management.......... 31
Item 13. Certain Relationships and Related Transactions.......................... 31

PART IV
Item 14. Exhibits, Financial Statement Schedules, and Reports on Form 8-K........ 32

FINANCIAL STATEMENTS............................................................................... F-1

SIGNATURES......................................................................................... S-1

EXHIBIT INDEX...................................................................................... E-1








i


PART I

ITEMS 1 AND 2. BUSINESS AND PROPERTIES

GENERAL

UNIFAB International, Inc. (together with its subsidiaries "the Company") is
a leader in the custom fabrication of decks and modules of drilling and
production equipment for offshore oil and gas platforms. The Company is capable
of producing equipment weighing up to 6,500 tons, and has special expertise in
the fabrication of decks with complex piping requirements and process equipment
using special materials. The Company also designs and fabricates drilling rigs
(including drilling barges using proprietary designs of the Company), and
production process systems and drilling masts under ASME and ISO 9001 quality
certifications.

Decks and modules fabricated by the Company can be installed on fixed and
floating platforms regardless of water depth. The Company also fabricates
jackets for fixed platforms, pilings and other rolled tubular steel sections,
compressor and generator packages, platform living quarters, subsea templates,
bridges for connecting offshore platforms, wellhead protectors and modules for
the onshore petrochemical and refining industries. In addition, the Company
refurbishes and retrofits existing jackets and decks and performs offshore
piping hook-up and platform maintenance services. Allen Process Systems, LLC, a
wholly owned subsidiary, designs and manufactures specialized process systems
and provides engineering and field commissioning services related to production
systems. The Company designs and fabricates drilling rigs, including first of a
kind barges using proprietary designs. The Company's main fabrication facilities
are located at the Port of Iberia in New Iberia, Louisiana. Through a wholly
owned subsidiary, UNIFAB International West, LLC, in Lake Charles, Louisiana,
the Company provides industrial maintenance services and repair, refurbishment
and conversion services for oil and gas drilling rigs. Structures fabricated by
the Company are installed in oil and gas producing waters around the world,
primarily the U.S. Gulf of Mexico (the "Gulf of Mexico") and offshore West
Africa. The Company's ability to provide high quality fabrication services and
maintain control over costs has contributed to its reputation for efficient,
timely and quality production.

Demand for the Company's services is primarily a function of worldwide
offshore oil and gas activity. An indication of that activity is measured by
drilling rig utilization rates, which have decreased to approximately 51% in
January 2002 from approximately 90% in March 2001 for the Gulf of Mexico and
have remained relatively steady at approximately 84% over the same period
worldwide. These are the overall rates applicable to all types of drilling rigs,
including land rigs, jack-up rigs, drill ships and semi-submersible rigs. An
increase or decrease in drilling activity is usually consistent with an increase
or decrease in the price of crude oil and natural gas, although changes in
drilling activity usually lag behind changes in oil and gas prices at uncertain
intervals. The price of west Texas intermediate crude oil decreased to
approximately $18.88 per barrel in January 2002 from over $29 per barrel in
December 2000, and the price per million cubic feet of natural gas has decreased
to approximately $2.35 in January 2002 from over $6.35 in December 2000.

Once drilling rig utilization rates in the Gulf of Mexico reach
approximately 85%, the Company expects increases in demand for its drilling rig
services. Due to the time required to drill an exploratory offshore well,
formulate a development plan and design offshore platforms, however, the
fabrication and installation of such platforms usually lag the start of
exploratory drilling by one to three years. The Company operates in a highly
competitive bidding environment, and the low number of major projects over the
last three years caused the Company to adjust downward the price it could obtain
for its fabrication services, to reduce the number of fabrication facilities it
operates, and to critically evaluate recovery of investments made in acquired
companies and developing facilities over the last four years.

Since 1998, the Company has acquired additional capacity by acquiring
companies near its original facilities at the Port of Iberia in New Iberia,
Louisiana and by developing a deepwater facility in Lake Charles, Louisiana.
However, while the Company was acquiring these companies and developing this
additional capacity, the price of oil and gas decreased and drilling activity
decreased, which resulted in a decrease in the demand for the Company's
fabrication services. The current revenue level of the Company

1


is approximately half of the historical revenue level that the acquired
companies operated at in 1997 and 1998. The Company believes that, as a result
of its capital investment in acquisitions and facilities coupled with the
decrease in demand, the Company currently has excess capacity. Accordingly, the
Company has ceased operating one of its facilities at the Port of Iberia, and
has relinquished its lease at that facility and another facility that had been
idle. The Company believes that its deepwater facility in Lake Charles has the
potential to develop revenue-producing capacity that is equal to that of the New
Iberia operations. However, in order to develop that capacity, additional
capital is required to provide equipment and working capital. The Company is
pursuing a variety of sources for that capital, which could include a partnering
arrangement with a financially stronger entity, obtaining separate capital
financing for the facility and other capital raising methods. If these methods
are unsuccessful, the Company may market the facility for an outright sale. In
the event that the Company sells the facility, it is likely that the sale would
not fully recover the cost of construction recorded on the facility and result
in the Company recording a loss on the sale which could be material to the
operating results of the Company.

1992 EXPANSION TRANSACTION. The Company's predecessor, Universal Partners,
Inc. ("Universal Partners"), was organized in 1980 by its founder, Dailey J.
Berard. In 1992, in order to expand its capabilities at the Port of Iberia and
meet increasing demand for its services, Universal Partners entered into an
agreement with McDermott Incorporated, a subsidiary of McDermott International,
Inc. ("McDermott"). Universal Partners contributed as a going concern to the
then newly formed Universal Fabricators, Incorporated ("Universal Fabricators")
approximately 50 acres of leased land, its buildings and fabrication equipment,
and $2.4 million in cash. McDermott contributed an inactive fabrication yard
directly across a canal from the land leased by Universal Partners, which
included approximately 85 acres of land, 200,000 square feet of covered
fabrication space and various equipment. This transaction (the "Expansion
Transaction") substantially enlarged the Company's yard space and increased
covered fabrication area from 25,000 square feet to approximately 225,000 square
feet. In exchange for those assets, Universal Partners and McDermott received
51% and 49%, respectively, of the outstanding stock of Universal Fabricators.

PUBLIC OFFERING. UNIFAB International, Inc. was formed in July 1997 to serve
as the parent corporation for Universal Fabricators. Prior to the completion of
the initial public offering of the Company (the "Initial Public Offering") in
September 1997, Universal Partners exchanged its shares of Universal Fabricators
common stock for 1,785,000 shares of Company Common Stock and distributed those
shares of Company Common Stock to its stockholders upon its dissolution.
McDermott also exchanged its shares of Universal Fabricators common stock for
1,715,000 shares of Company Common Stock, which it sold in the Initial Public
Offering at the initial public offering price.

ACQUISITIONS. The Company expanded its operations through the acquisition of
the assets and business of Professional Industrial Maintenance, LLC effective
January 1, 1998, which provides industrial plant maintenance and construction
services to the southwest Louisiana area. As part of this acquisition, the
Company also acquired lease rights to a 60-acre fabrication yard on an
industrial canal, 12 miles southwest of Lake Charles, Louisiana. This facility
has 40-foot water depth and access to the Gulf of Mexico through the Calcasieu
Ship Channel, which is maintained by the U.S. Army Corp of Engineers.

Effective July 24, l998, the Company acquired all of the outstanding common
stock of Allen Tank, Inc. ("Allen Tank"), in exchange for 819,000 shares of the
Company's common stock, plus $1.2 million in cash and notes paid to a dissenting
shareholder. Allen Tank (which has been converted to a limited liability company
and renamed Allen Process Systems, LLC) is located in New Iberia, Louisiana on
property near the Company's Port of Iberia facilities. Allen Process Systems,
LLC designs and manufactures specialized process systems related to the
development of oil and gas reserves. This acquisition expanded the Company's
ability to offer quality services and products in its core competencies and
further strengthened its technological base.

On July 24, 1998, the Company acquired LATOKA Engineering, Ltd. ("LATOKA")
from certain of the Allen Tank Shareholders for 79,000 shares of UNIFAB common
stock. LATOKA, whose name has been changed to Allen Process Systems, Ltd., is
headquartered in London, England, and provides engineering and project
management services primarily in Europe and the Middle East.

2


On April 29, 1999, the Company acquired all of the outstanding common stock
of Oil Barges, Inc. ("OBI") and substantially all assets of Southern Rentals,
LLC, an affiliate of OBI in exchange for approximately 700,000 shares of the
Company's common stock. OBI designs and fabricates drilling rigs including those
using proprietary technology designed by OBI. Superior Derrick Services, a
wholly owned subsidiary of OBI builds drilling masts and refurbishes equipment
used on drilling barges at the Company's refurbishment facility in Parks,
Louisiana.

On June 24, 1999, the Company acquired the assets of Compression Engineering
Services, Inc. ("CESI") for 60,000 shares of the Company's common stock. CESI
provides compressor project engineering from inception through commissioning,
including project studies and performance evaluation of new and existing
systems, on-site supervision of package installation and equipment sourcing and
inspection. CESI operates as a division of Allen Process Systems, LLC.

For over five years, the Company has engaged in the business of designing
and fabricating equipment used in offshore drilling and production on platforms
to control environmental hazards. The Company has operated its environmantal
business through a division of Unifab International, Inc. The Company is
considering spinning off this business to its shareholders, if we determine that
such a spin off will be tax free and will be in the best interests of the
Company and our shareholders.

PRIVATE PLACEMENT AND RESALE REGISTRATION. On September 29, 2000, the
Company completed a private placement in which it sold 1,300,000 shares to eight
accredited investors for aggregate proceeds of $12,350,000 ($9.50 per share).
Morgan Keegan & Company, Inc., for its services as placement agent, received a
commission of $617,500 and a five-year warrant to purchase 60,000 shares of the
common stock of the Company at an exercise price of $9.50 per share. The sales
price of $9.50 for each share was determined by the parties in arm's length
negotiations over several days ending on September 15, 2000. On that date, the
reported high, low, and closing per share sales prices of Company stock was
$11.50, $10.50, and $10.8125, respectively. The Company announced the completion
of the private placement on October 3, 2000. The range of the reported prices
per share of Company stock from September 15, 2000 to October 3, 2000 was $9.625
to $13.00. The net proceeds of the private placement, which were applied to
reduce the indebtedness under the secured senior credit facility of the Company,
were $11,732,500 after the commission to the placement agent but before offering
expenses.

The shares and the warrant were issued in private placement transactions
exempt from registration under Section 4(2) of the Securities Act of 1933 and
Rule 506 of Regulation D promulgated under the Securities Act of 1933. Each of
the purchasers was an accredited investor under Regulation D. The securities
were not offered or sold by any form of general solicitation or advertising. The
Company disclosed in writing to each purchaser prior to sale that the securities
were not registered under the Securities Act of 1933 and could not be resold
unless they were registered under the Securities Act of 1933 or unless an
exemption from registration was available. The Company also placed a legend on
each certificate or instrument evidencing the securities stating that the
securities had not been registered under the Securities Act of 1933 and
referring to the restrictions on their transferability and sale.

Pursuant to its agreement with the purchasers in the private placement and
Morgan Keegan & Company, Inc., the Company filed on October 26, 2000 with the
Securities and Exchange Commission a registration statement for the resale of
the 1,300,000 shares sold in the private placement and the 60,000 shares
underlying the warrant issued to Morgan Keegan & Company, Inc. The registration
statement became effective January 5, 2001 and also included the 700,000 shares
of Company stock owned by a former director of the Company, pursuant to a
registration rights agreement between the Company and certain shareholders of
the Company, most of whom elected not to include their shares in the
registration statement.

AMENDED AND RESTATED CREDIT AGREEMENT. On March 5, 2002, the Company entered
into a Waiver and Second Amendment to Amended and Restated Credit Agreement (the
"Amendment"). The Senior Secured Credit Agreement was originally entered into on
November 30, 1999, and was amended and restated October 19, 2000 with the same
syndicate of commercial banks led by Bank One, Louisiana, N.A., as agent (the
"Credit Agreement"). At December 31, 2001, the Company had $ 23.8 million
outstanding under the Credit Agreement, of which $1.2 million is for letters of
credit. During 2001, the Company

3


increased the outstanding balance under the Credit Agreement from $22.2 million
to $23.8 million. The Credit Agreement is secured by substantially all of the
assets of the Company and provides borrowings subject to certain borrowing base
limitations based on 50% of the appraised value of fixed assets (approximately
$14.2 million at December 31, 2001) plus 80% of eligible accounts receivable
(approximately $5.7 million at December 31, 2001). At December 31, 2001,
borrowings under the Credit Agreement exceeded the borrowing base limit by $3.0
million. The Credit Agreement requires the Company to make monthly interest
payments, currently approximately $165,000 per month. Throughout 2001, the
Company was out of compliance with the financial covenants and certain other
requirements of the Credit Agreement and as a result paid interest at a rate
that included a maximum variable interest margin. The variable fee range for
issued letters of credit is 1.25% to 2.75% per annum on the principal amount of
letters of credit issued for performance or payment, or 2% to 4% per annum on
the principal amount if the letter of credit is a financial letter of credit.
The unused commitment fee range is 1/4% to 1% per annum. The letter of credit
fees and unused commitment fees are variable based on the funded indebtedness to
EBITDA ratio as defined in the Credit Agreement.

The Company was not in compliance with the terms of the Credit Agreement as
of December 31, 2001, as follows: tangible net worth was not sufficient to meet
the ratio to funded indebtedness required by one of the financial covenants;
adjusted earnings before taxes, depreciation and amortization for the year ended
December 31, 2001 were not sufficient to meet the ratio to funded indebtedness;
adjusted earnings before taxes, depreciation and amortization for the year ended
December 31, 2001 were not sufficient to meet the ratio to fixed charges; the
current ratio was not sufficient to meet the minimum current ratio; and the net
loss before taxes for the quarter ended December 31, 2001 did not meet the
required minimum net income. At the request of the Company, the Bank Group
executed the Amendment on March 5, 2002, which waived the defaults of these
financial covenants for the period ended December 31, 2001. Under the terms of
the Amendment, all new advances as well as all existing advances bear interest
at the prime lending rate plus 3% (7.5% at March 31, 2002). The maturity of the
Credit Agreement has been extended to January 31, 2003. If the Company has not
replaced the Credit Agreement by January 31, 2003, or if the maturity date is
accelerated due to non performance under the terms of the Amendment, the Company
will be required to pay $450,000 to the Bank Group. The Amendment requires the
Company to make scheduled reductions totaling $8.0 million, $1.9 million of
which was paid concurrent with the execution of the Amendment on March 5, 2002,
and the remaining $6.1 million is due on June 30, 2002. In the event the Company
is unable to make the $6.0 million payment by June 30, 2002, the Company will be
required to pay up to $825,000 to the Bank Group. The Amendment allows the
Company to exceed the borrowing base limit up to $3.5 million until June 30,
2002, and limits the Company to the borrowing base limit beginning June 30,
2002. The Amendment requires the Company to diligently market for sale the
Company's deep water facility in Lake Charles, Louisiana. The Amendment revises
the financial covenants related to operating results to be consistent with the
Company's expected operating results. However, because the Amendment requires
substantial repayments by June 30, 2002, and the Company currently does not have
the resources to make such payments, there is a substantial risk that the
Company will be unable to maintain compliance with its obligations to its Bank
Group or meet its obligations in the ordinary course of business. The Amendment
provides for additional borrowings under certain conditions, mainly through the
sale of assets or subsidiaries. The Company hopes to replace the Credit
Agreement with debt or equity financing before the maturity date of January 31,
2003.

CHANGED FISCAL YEAR. On June 20, 2000, the board of directors of the Company
approved the change of the end of the fiscal year of the Company from March 31
to December 31. The nine-month transition period of the Company beginning April
1, 2000 and ending December 31, 2000 ("Transition 2000") was reported in its
last Form 10-K. The first new twelve-month fiscal year of the Company beginning
January 1, 2001 and ending December 31, 2001 is reported in this Form 10-K. By
changing its year end to December 31, the Company will report its quarterly and
annual results on a comparable basis with many other public companies in the oil
and gas industry.


DESCRIPTION OF OPERATIONS

The Company's primary activity is the fabrication of decks and modules for
offshore oil and gas drilling and production platforms, including the design and
manufacturing of production processing systems for

4


application throughout the world. The Company has extensive experience in the
fabrication of decks and modules with complex piping requirements and believes
that its reputation for efficient, timely and high quality production of these
structures has historically given it a competitive advantage in obtaining
projects of this type. The Company also fabricates jackets for fixed production
platforms for use in up to 400 feet of water. Other structures fabricated by the
Company include buoyancy cans for deep water oil and gas production facilities,
pilings and other rolled tubular steel sections, modules of drilling and
production equipment, compressor and generator packages, platform living
quarters, subsea templates, bridges for connecting offshore platforms, wellhead
protectors, other structures used in production and development activities and
production processing systems and other modules for the onshore petrochemical
and refining industries. The Company can construct and has in the past
constructed platform drilling rigs, posted drilling rigs and barges, and
liftboats.

FABRICATION OF DECKS AND OTHER OFFSHORE PLATFORM COMPONENTS. The Company
fabricates decks and modules for fixed and floating offshore platforms as well
as jackets for fixed offshore platforms. A fixed platform is the traditional
type of platform used for the offshore drilling and production of oil and gas.
Most fixed platforms currently in use are of the traditional jacket-type design.
Recently there has been an increase in the use of floating platforms as a result
of increased drilling and production activities in deeper waters. Floating
platforms are of three basic types: tension-leg platforms, spar platforms and
floating production facilities. Fixed platforms are generally better suited for
shallower water depths, whereas floating platforms, although they can be used in
any water depth, are primarily used in water depths greater than 1,000 feet.
Because they are mobile (and can therefore be reused), floating platforms are
sometimes used in water depths that could accommodate fixed platforms,
particularly where the petroleum reservoir has a relatively short production
life.

The Company also fabricates subsea templates that often form a part of a
subsea production system. Subsea production systems, which are systems that
contain primary well control equipment and rest directly on the ocean floor, are
becoming more prevalent in very deep water, in areas subject to severe weather
conditions and in smaller fields with relatively short production lives that are
located near existing pipelines and infrastructures. These systems are generally
connected to existing surface facilities, which augment subsea hydrocarbon
processing and transportation operations.

The most common type of fixed platform consists of a deck structure located
above the level of the storm waves and supported by a jacket. A jacket is a
tubular steel, braced structure extending from the mudline on the seabed to a
point above the water surface which is in turn supported on tubular steel
pilings driven deep into the seabed. The deck structure is designed to
accommodate multiple functions including drilling, production, separating,
gathering, piping, compression, well support and crew quartering. Most fixed
platforms built today can accommodate both drilling and production operations.
These combination platforms are generally larger and more costly than
single-purpose structures. However, because directional drilling techniques
permit a number of wells to be drilled from a single platform and because
drilling and production can take place simultaneously, combination platforms are
often more cost effective.

Decks are built as either a single structure or in modular units. The
composition and quantity of petroleum in the well stream generally determine the
design of the production deck on a processing platform. Typical deck production
equipment includes crude oil pumps, gas and oil separators, gas compressors and
electricity generators. Much of this equipment involves the use of complex
piping and electrical components. The equipment, piping and controls associated
with major process subsystems are often joined together in modules which can
then be installed on the deck as a unit either on land or offshore. Platforms
can be joined by bridges to form complexes of platforms to service very large
projects and to improve safety by dividing functions among specialized
platforms. Floating platforms, like fixed platforms, support decks or modules
with equipment to perform oil and gas processing and may support drilling
operations as well.

Most of the structural steel used in the Company's operations arrives at the
Company's fabrication yards as standard steel shapes and steel plate. The
standard shapes and plate are cut to appropriate sizes or shapes and, in some
cases, rolled into tubular sections by the Company's rolling mill. These
sections are welded together into structures that become part of decks, modules,
jackets and other platform structures.

5


Through its wholly owned subsidiary, Allen Process Systems, LLC, the Company
designs and manufacturers equipment and pressure vessels to customer
specifications. Production process systems include oil and gas separation
systems, dehydrators and desalters, glycol dehydrators and the associated
mechanical, structural and electrical instrumentation and components of these
systems. The Company can fabricate these systems using a wide range of alloys as
well as carbon steel. The design process utilizes state-of-the-art,
computer-aided design and drafting technology to deliver high quality, accurate
design and fabrication drawings. In some instances, the customer may supply
equipment and pressure vessels. Compression Engineering Services, a division of
Allen Process Systems, provides compressor project engineering from inception
through commissioning, including project studies and performance evaluation of
new and existing systems, on-site supervision of package installation and
equipment sourcing and inspection.

While the structural portion of a deck or module is being assembled, process
piping is fabricated in the Company's pipe shop. Piping is made into spools by
fitting and welding together pipe and pipe fittings. To the extent possible,
pipe supports and pipe spools are installed onto the various structural
subassemblies of a deck or module before final assembly. The completed
structural subassemblies are then lifted, positioned and welded together.
Finally, the oil and gas process equipment along with the remaining pipe
supports and pipe spools, valves and electrical and instrumentation components
are installed and connected. The Company has installed both carbon and alloy
steel piping and has also installed process piping for sour gas service, which
requires adherence to more stringent industry code requirements. The Company
typically procures most of the piping, pipe fittings, valves, instrumentation
and electrical materials in accordance with the customer's specifications as
part of its contract.

The Company performs a wide range of testing and commissioning activities.
Virtually every contract requires, at a minimum, nondestructive testing of
structural and piping welds, piping hydrostatic pressure testing and loop
testing of instrumentation and electrical systems. The Company also commonly
performs commissioning of certain process subsystems. A series of protective
coatings is applied to the critical areas of the deck or module to resist the
extremely corrosive conditions in an offshore environment. The Company generally
subcontracts certain parts of the work to qualified subcontractors, particularly
electrical, instrumentation and painting.

Jackets are generally built in sections so that, to the extent possible,
much of their fabrication is done on the ground. As each section of legs and
bracing is completed, it is lifted by a crawler crane and then joined to another
upright section. When a deck, module or jacket is complete and ready for load
out, it is moved along a skidway and loaded onto a cargo barge. Using
ocean-going tugs, the barge and its cargo are transported to the offshore site
for installation by a marine construction contractor.

PLATFORM REFURBISHMENT. The Company is active in the market for the
refurbishment of existing jackets and decks. Platform operators occasionally
remove platforms previously installed in the Gulf of Mexico and return the
platforms to a fabricator for refurbishment, which usually consists of general
repairs and maintenance work and, in some cases, modification. There are a
substantial number of structures stored by customers on Company premises,
pending instructions from the customer to commence refurbishment. Because
refurbishment is generally not time-critical, the Company is able to use this
work as a means of keeping employees productively occupied between other more
time-critical projects. Refurbishment work is most often conducted on a time and
materials basis because generally the scope of the work to be done on the
platform being refurbished is refined as the refurbishment is performed and
cannot be predicted with 100% accuracy. As a result, a contract to refurbish a
deck has a lower effect on the Company's measured backlog at a given date than a
contract for a new build deck of the same size.

DRILLING RIG CONSTRUCTION AND REFURBISHMENT. The Company designs and
fabricates drilling rigs for use in shallow water, swamp and marshland and
inland. The Company also performs maintenance, refurbishment and upgrade
services on deep-water drilling rigs and jack up rigs at its deep-water facility
near Lake Charles, Louisiana. Water channel depth limits access to the Port of
Iberia, and as a result equipment and vessels that draw more than 12 ft. cannot
be brought into the Port of Iberia. The Company's facility at Lake Charles has
no such restrictions. The Company has developed the capabilities of this

6


facility to support refurbishment upgrades of jack up and semisubmersible
drilling rigs for deep water use and, as required by customer demand, to support
new construction of drilling rigs, platforms and platform components.

PLANT MAINTENANCE. The Company provides maintenance, construction and
fabrication services to industrial plants in the southwest Louisiana and east
Texas areas. These services are performed under fixed price, time and material
and maintenance agreement contracts, generally pursuant to competitive bids. The
number of employees providing these services varies from time to time with the
size and duration of the projects.

FIELD SERVICE AND COMMISSIONING. The Company maintains a staff of
experienced, highly trained technicians to provide 24-hour services for trouble
shooting and commissioning of oil and gas production facilities around the
world. These services are mainly performed on a time and material basis.

OFFSHORE SERVICES. The Company has a number of employees with whom it
contracts to send offshore in crews to perform piping interconnect and general
maintenance and repair services on offshore platforms on a time and material
basis.

ENVIRONMENTAL WASTEWATER TREATMENT. The Company provides design and
fabrication of wastewater treatment modules and stand alone facilities around
the world. These facilities are generally sold under fixed price contracts in
foreign markets and are fabricated in the Company's existing fabrication
facilities.

FACILITIES AND EQUIPMENT

FACILITIES. The Company's corporate headquarters and main fabrication
facilities are located at the Port of Iberia in New Iberia, Louisiana,
approximately 20 miles southeast of Lafayette, Louisiana and 30 miles north of
the Gulf of Mexico. These fabrication facilities include approximately 171 acres
developed for fabrication, one 12,000 square-foot office building that houses
administrative staff, approximately 292,000 square feet of covered fabrication
area, and approximately 100,000 square feet of warehouse and other storage area.
The facilities also have approximately 8,000 linear feet of water frontage, of
which 3,100 feet is steel bulkhead which permits outloading of heavy structures.

The structures that the Company fabricates are transported from the New
Iberia facilities by barge to the Gulf of Mexico and other offshore locations by
offshore construction companies. The slip, bulkhead and loadout facilities of
the Company enable it to produce decks and deck components weighing up to 6,500
tons at its Port of Iberia facilities. Due to the limitations of the various
access routes from the Port of Iberia to the Gulf of Mexico, however, a barge
carrying a structure weighing over approximately 4,000 tons could not currently
move from the Company's Port of Iberia facilities to the Gulf of Mexico without
special efforts, including dredging, which would add costs to the project that
the customer may be unwilling to bear. One main route to the Gulf of Mexico from
the Port of Iberia, the Freshwater Bayou Channel, has locks that prevent the
passage of structures more than 80 feet in width. A by-pass channel around these
locks has been dredged by the State of Louisiana to remove silt build-up and
currently permits passage around the locks without any significant width
restrictions. Traffic through the by-pass has permitted the by-pass to remain
passable for over two years without additional dredging. Additional dredging of
the by-pass may be required, however, and the State of Louisiana may not
continue to provide it. If the by-pass were not maintained, the Company would be
unable to deliver from its Port of Iberia facilities structures weighing over
4,000 tons unless it incurred substantial additional dredging costs. This would
reduce the capacity of the Company and decrease its ability to obtain profitable
projects.

The Company's facility in Lake Charles, Louisiana is located on an
industrial canal at the intersection of the Intracoastal Canal and the Calcasieu
Ship Channel, 12 miles south of Lake Charles and 20 miles from the Gulf of
Mexico. The industrial canal is dredged to a 40-foot water depth with a bottom
width of 400 feet. The facility is currently being leased from the Lake Charles
Harbor & Terminal District under a lease with 14 years remaining, including
option periods, and with options to lease up to 68 acres. The facility has
67,400 square feet of covered fabrication area, approximately 9,500 square feet
of covered warehouse area and administrative support facilities on the site. The
facility has 1,100 linear feet of steel bulkhead water

7


frontage. The access of this facility to the Gulf of Mexico imposes no weight or
size limitations on any structure fabricated or refurbished there, but the
facility does not currently have equipment and personnel with capabilities as
extensive as those of the New Iberia facilities of the Company.

The Company evaluates its facility needs on a recurring basis. As a result
of underutilization, on January 1, 2002 the Company released the lease on its
barge repair facility at the Port of Iberia, the operating base for OBI. The
Company did not expect to adequately utilize this facility in the near future
until operating volume increased substantially. As a result, the additional
facilities at the former OBI yard were determined to be excess, requiring
incremental overhead costs such as management and supervision, utilities,
equipment, etc. The former OBI facility provided no unique capabilities and
therefore the Company released the facility to the Port of Iberia. The facility
may be leased to a company that may compete with the Company on projects in the
future. In the final assessment, the Company concluded that the cost of
maintaining that facility without adequate work exceeded the risk associated
with releasing the facility and having a new competitor in the Port of Iberia.
Fabrication of shallow water drilling rigs formerly performed at the OBI
facility will be performed at the Company's other facilities at the Port of
Iberia. Other similar capacity reductions could occur in the future when the
business circumstances support such action.

The Company also leases administrative offices in London, England and a
sales office in Houston, Texas.

EQUIPMENT. The Company's main fabrication facilities house its Bertsch steel
plate bending rolls with capacities to roll up to four-inch steel plate into
structural components. These plate rolls allow the Company to provide 100% of
its rolling needs and enable the Company to reduce the risk of cost overruns and
delays in project completion. In addition, the Company sells rolled steel goods
to other fabricators on a subcontracting basis. The Company also uses a Huber
oven for stress relief and heat treatment of high-pressure vessels. This oven
allows the Company to bend steel plate up to 5 1/2" thickness. The Company owns
a grit blast system that can blast steel at a rate approximately ten times
faster than conventional sandblasting. This greatly reduces labor costs and also
decreases the Company's use of conventional sandblasting, which is considered to
be a more hazardous and slower method of preparing steel for painting.

The Company also has an automatic plate cutting machine used for cutting
steel in complex geometric sections, as well as various other equipment used in
the Company's fabrication business. The Company currently owns eleven crawler
cranes, which range in tonnage capacity from 50 to 250 tons. The Company
performs routine maintenance on all of its equipment.

As part of an ongoing program, equipment is evaluated against expected
operating volume and specific needs in the foreseeable future. Equipment that is
no longer useful to the Company, or equipment that will not be utilized to
capacity, is marketed for disposal.

MATERIALS

The principal materials used by the Company in its fabrication business --
standard steel shapes, steel plate, piping, pipe fittings, valves, welding
gases, fuel oil, gasoline and paint -- are currently available in adequate
supply from many sources. The Company does not depend upon any single supplier
or source. However, the Company's current financial instability is impacting its
ability to obtain materials on normal credit terms and increasingly requires
payment upon delivery of critical materials.

SAFETY AND QUALITY ASSURANCE

Management is concerned with the safety and health of the Company's
employees and maintains a safety assurance program to reduce the possibility of
costly accidents. To date, over three million manhours have been completed at
the Company's structural fabrication facilities without a lost time accident.
The Company's safety department establishes guidelines to ensure compliance with
all applicable state and federal safety regulations. The Company provides
training and safety education through orientations for new employees and
subcontractors, daily crew safety meetings and training programs as required by
OSHA regulations. The Company also employs several safety technicians. The
Company has a comprehensive

8


drug-testing program and conducts periodic random employee health screenings.
The Company has at times contracted with a third-party safety consultant to
provide training and suggestions and a licensed emergency medical technician in
its ongoing commitment to a safe and healthy work environment. The Company
believes that its safety program and commitment to quality are vital to
attracting and retaining customers and employees.

The Company fabricates to the standards of the American Petroleum Institute,
the American Welding Society, the American Society of Mechanical Engineers, the
American Bureau of Shipping and specific customer specifications. The Company
uses welding and fabrication procedures in accordance with the latest technology
and industry requirements. Training programs are conducted to upgrade skilled
personnel and maintain high quality standards. In addition, the Company
maintains on-site facilities for the x-ray of all pipe welds, which process is
performed by an independent contractor. Management believes that these programs
generally enhance the quality of its products and reduce their repair rate.

Allen Process Systems, LLC and Superior Derricks, LLC. are certified as ISO
9001 fabricators. ISO 9001 is an internationally recognized verification system
for quality management overseen by the International Standards Organization
based in Geneva, Switzerland. The certification is based on a review of the
Company's programs and procedures designed to maintain and enhance quality
production and is subject to annual review and recertification.

CUSTOMERS AND CONTRACTING

The Company's customers are primarily major and independent oil and gas
companies and offshore marine construction contractors. Fixed platforms and
other structures fabricated by the Company are used primarily in the Gulf of
Mexico and offshore West Africa. Process equipment manufactured by the Company
is in use world wide.

A large portion of the Company's revenue has historically been generated by
a few customers, although not necessarily the same customers from year-to-year.
The following table provides information with respect to customers who accounted
for more than 10% of the Company's revenue for the year ended December 31, 2001,
the nine month period ended December 31, 2000 and the fiscal year ended March
31, 2000:

CUSTOMER % OF REVENUE
----------------------------------- ------------
Year ended December 31, 2001 BP Amoco 19
Transition 2000 BP Amoco, Unocal/Spirit Energy 76 21
Year ended March 31, 2000 Amoco Trinidad, ENPPI 26

Although the Company's direct customers on many projects are installation
contractors, each project is ultimately fabricated for use either directly or
indirectly by an oil and gas company. The Company, from time to time, contracts
with multiple installation contractors who may be supplying structures to the
same oil and gas company and, in some instances, contracts directly with the oil
and gas companies. Thus, concentration among the Company's customers may be
greater when the customer is viewed as the oil and gas company rather than the
installation contractor.

The level of fabrication that the Company may provide, directly or
indirectly, to any particular oil and gas company depends, among other things,
on the size of that company's capital expenditure budget devoted to platform
construction in a particular year and the Company's ability to meet the
customer's delivery schedule. Similarly, the level of fabrication that the
Company may provide as a subcontractor to an offshore construction company
depends, among other things, on the ability of that company to successfully
obtain prime contracts with oil and gas companies and the ability of the Company
to meet the delivery schedule of the prime contractor. For these reasons, the
oil and gas companies and the prime contractors who account for a significant
portion of revenue in one fiscal year may represent an immaterial portion of
revenue in subsequent years. However, the loss of any significant customer
(whether an oil and gas company with which the Company directly contracts or a
prime contractor for which the Company has provided services on a subcontract
basis) for any reason, including a sustained decline in an oil and gas company's
capital expenditure budget or the prime contractor's inability to successfully
obtain contracts, or

9


other competitive factors, could result in a substantial loss of revenue and
have a material adverse effect on the Company's operating performance.

Most of the Company's projects are awarded on a fixed-price basis, and while
customers may consider other factors, including the availability, capability,
reputation and safety record of a contractor, price and the ability to meet a
customer's delivery schedule are the principal factors on which the Company is
awarded contracts. The Company's contracts generally vary in length from one to
18 months depending on the size and complexity of the project.

Most of the Company's fabrication work is performed pursuant to fixed-price
contracts, although some projects are performed on a time and materials basis.
Under fixed-price contracts, the Company receives the price fixed in the
contract, subject to adjustment only for change orders placed by the customer.
As a result, with respect to fixed-price contracts, the Company retains all cost
savings but is also responsible for all cost overruns. Under time and materials
arrangements, the Company receives a specified hourly rate for direct labor
hours worked and a specified percentage mark-up over its cost for materials. As
a result, under time and materials contracts, the Company is protected against
cost overruns but does not benefit directly from cost savings. As the Company is
typically able to obtain prices for materials in excess of its costs, the cost
and productivity of the Company's labor force are the key factors affecting the
Company's operating results. Consequently, it is essential that the Company
control its costs and maximize the productivity of its workforce.

The following table sets forth for the periods presented the percentage of
the Company's revenue derived from each type of contract used by the Company:

NINE MONTHS FISCAL YEAR
YEAR ENDED ENDED ENDED
DECEMBER 31, DECEMBER 31, MARCH 31,
------------ ------------ -----------
TYPE OF CONTRACT (1) 2001 2000 2000
- ---------------------------- ------------ ------------ -----------

Fixed-Price................ 62.5% 58.9% 75.7%
Time and Materials........ 37.5% 41.0% 24.2%

- ----------
(1) Remaining revenues were derived from storage fees.

SEASONALITY

The Company's operations are subject to seasonal variations in weather
conditions and daylight hours. Because most of the Company's construction
activities take place outdoors, the number of direct labor hours worked
generally declines in winter months due to an increase in rainy and cold
conditions and a decrease in daylight hours. Operations may also be affected by
the rainy weather, hurricanes and other storms prevalent along the United States
Gulf Coast throughout the year. As a result, the Company's revenue, gross profit
and net income during the quarter ending December 31 are subject to being
disproportionately low as compared to the quarters ending June 30 and September
30, and full year results may not in all cases be a direct multiple of any
particular quarter or combination of quarters. The table below indicates for
each quarter of fiscal year ended December 31, 2001, Transition 2000 and the
Company's two prior fiscal years ending March 31 the percentage of annual
revenue and net income earned and the number of direct labor hours worked in
each quarter.



DECEMBER 31, 2001 TRANSITION 2000 MARCH 31, 2000
------------------------- ------------------ ---------------------------
1ST. 2ND 3RD 4RD 1ST. 2ND 3RD 1ST. 2ND 3RD 4TH
QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR. QTR.
---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----

Revenue................ 27% 28% 24% 21% 33% 37% 29% 22% 29% 25% 24%
Net income (loss)...... (5%) (2%) (79%) (14%) (4%) (29%) (68%) 5% 4% (19%) (90%)
Direct labor hours worked
(in thousands)....... 315 382 302 177 271 351 312 318 277 210 235


10


Recent reductions in industry activity levels may tend to increase the affects
of seasonality on the Company's operations.

COMPETITION

The offshore platform fabrication industry is highly competitive and
influenced by events largely outside of the control of offshore platform
fabrication companies. Projects are generally awarded on a competitive bid basis
with customers usually requesting bids on projects one to three months prior to
commencement. Since 1992, there has been consolidation in the industry as
several marine fabrication companies have combined with other companies or
ceased operations altogether. The domestic fabricators that operate in the
custom fabrication market, several of which are substantially larger and have
greater resources and capabilities than the Company, compete intensely for
available projects. For international projects, the Company competes with many
of the same domestic fabricators, as well as with several foreign fabricators,
some of which are substantially larger and have greater financial resources and
capabilities than the Company.

The Company's marketing staff contacts offshore construction contractors and
oil and gas companies to obtain information as to upcoming projects so that the
Company will be well positioned to bid for the projects. Price and the
contractor's ability to meet a customer's delivery schedule are the principal
factors in determining which qualified fabricator is awarded a contract for a
project. Customers also consider, among other things, the availability of
technically capable personnel and facility space, a fabricator's efficiency,
condition of equipment, reputation, safety record and customer relations. The
Company believes that the limited availability of experienced supervisory and
management personnel, as well as skilled laborers, presents the greatest barrier
to entry to new companies trying to enter the fabrication industry.

The Company's competitive pricing, expertise in fabrication of offshore
marine structures and in design and manufacture of production process systems
and its long-term relationships with international customers have enabled it in
the past to compete effectively for projects destined for international waters.
The Company recognizes, however, that foreign governments often use subsidies
and incentives to create jobs where oil and gas production is being developed.
The additional transportation costs that will be incurred when exporting
structures from the U.S. to foreign locations may hinder the Company's ability
to successfully bid for projects against foreign competitors. Because of
subsidies, import duties and fees, taxes on foreign operators and lower wage
rates in foreign countries, fluctuations in the value of the U.S. dollar,
collection risks on projects payable in a foreign currency and other factors,
the Company may find it increasingly difficult to remain competitive with
foreign contractors for projects designed for use in international waters.

Because of its deteriorating financial condition, the Company was severely
affected by competition in 2001. In some cased, the Company was not asked to bid
on longer term projects. In other cases, the Company did not have the resources
to provide financial bonds for its performance. The Company expects substantial
erosion of its competitive advantage until the Company's financial condition
improves, if ever.

BACKLOG

As of December 31, 2001, the Company's backlog was approximately $8.3
million, all of which management expects to be performed before January 2003.

The Company's backlog is based on management's estimate of the remaining
labor, material and subcontracting costs to be incurred with respect to those
projects as to which a customer has authorized the Company to begin work or
purchase materials pursuant to written contracts, letters of intent or other
forms of authorization. Often, however, original contract prices are based on
incomplete engineering and design specifications. As engineering and design
plans are finalized or changes to existing plans are made, the total contract
price to complete such projects is likely to change. In addition, most projects
currently included in the Company's backlog are subject to termination at the
option of the customer, in which case the customer is generally required to pay
the Company for work performed and materials purchased through the date of
termination and, in some instances, pay the Company termination fees.

11


GOVERNMENT AND ENVIRONMENTAL REGULATION

Many aspects of the Company's operations and properties are materially
affected by federal, state and local regulation, as well as certain
international conventions and private industry organizations. The exploration
and development of oil and gas properties located on the outer continental shelf
of the United States is regulated primarily by the Mineral Management Services
("MMS"). The MMS has promulgated federal regulations under the Outer Continental
Shelf Lands Act requiring the construction of offshore structures located on the
outer continental shelf to meet stringent engineering and construction
specifications. The Company is not directly affected by regulations applicable
to offshore construction operations as are its customers that install and
operate the structures fabricated by the Company, but the Company is required to
construct these structures in accordance with customer design that must comply
with applicable regulations; to the extent such regulations detrimentally affect
customer activities, the operations of the Company may be adversely affected.
Violations of the laws and related regulations directly affecting the Company's
operations can result in substantial civil and criminal penalties as well as
injunctions curtailing operations. The Company believes that its operations are
in compliance with these and all other laws and related regulations affecting
the fabrication of structures for delivery to the outer continental shelf of the
United States and the laws and related regulations governing other areas of the
world. In addition, the Company depends on the demand for its services from the
oil and gas industry and, therefore, is affected by changing taxes, price
controls and other laws and regulations relating to the oil and gas industry. In
addition, offshore construction and drilling in certain areas has been opposed
by environmental groups and, in certain areas, has been restricted or
prohibited. To the extent laws or regulations are enacted or other governmental
actions are taken that prohibit or restrict offshore construction and drilling
or impose environmental protection requirements that result in increased costs
to the oil and gas industry in general and the offshore construction industry in
particular, the business and prospects of the Company could be adversely
affected. Such restrictions in the areas where the Company's products are used
have not been substantial to date. The Company cannot determine to what extent
future operations and earnings of the Company may be affected by new
legislation, new regulations or changes in existing laws or regulations.

The Company's operations and properties are subject to a wide variety of
increasingly complex and stringent federal, state and local environmental laws
and regulations, including those governing discharges into the air and water,
the handling and disposal of solid and hazardous wastes, the remediation of soil
and groundwater contaminated by hazardous substances and the health and safety
of employees. These laws may provide for "strict liability" for damages to
natural resources and threats to public health and safety, rendering a party
liable for environmental damage without regard to negligence or fault on the
part of such party. Sanctions for noncompliance may include revocation of
permits, corrective action orders, cease and desist orders, administrative or
civil penalties and criminal prosecution. Certain environmental laws provide for
strict, joint and several liability, without regard to fault or negligence, for
remediation of spills and other releases of hazardous substances. In addition,
the Company may be subject to claims alleging personal injury, property damage
or natural resource damage as a result of the handling of hazardous substances.
Such laws and regulations may also expose the Company to liability for the
conduct of or conditions caused by others, or for acts of the Company that were
in compliance with all applicable laws at the time such acts were performed.

The Comprehensive Environmental Response, Compensation, and Liability Act of
1980, as amended, and similar laws provide for responses to and liability for
releases of hazardous substances into the environment. Additionally, the Clean
Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, the
Safe Drinking Water Act, the Emergency Planning and Community Right to Know Act,
each as amended, and similar state or local counterparts to these federal laws,
regulate air emissions, water discharges, hazardous substances and wastes and
require public disclosure related to the use of various hazardous substances.
Compliance with such environmental laws and regulations requires the acquisition
of permits and other authorizations for certain activities and compliance with
various standards and procedural requirements. The Company believes that its
facilities are in substantial compliance with current regulatory standards.

12


In addition to the Company's operations, in the past other industrial
operations have been conducted by other entities on the properties now used by
the Company. Although the Company does not believe that there is any material
remediation requirements on its properties, it is possible that these past
operations may have caused unknown environmental conditions that might require
future remediation.

The Company's operations are also governed by laws and regulations relating
to workplace safety and worker health, primarily the Occupational Safety and
Health Act and regulations promulgated thereunder. In addition, various other
governmental and quasi-governmental agencies require the Company to obtain
certain miscellaneous permits, licenses and certificates with respect to its
operations. The kind of permits, licenses and certificates required in the
Company's operations depend upon a number of factors. The Company believes that
it has all such miscellaneous permits, licenses and certificates that are
material to the conduct of its existing business.

The Company's compliance with the laws and regulations discussed in this
section have entailed certain additional expenses and changes in operating
procedures. These expenses have not been substantial over the past 10 years, and
the Company believes that compliance with these laws and regulations will not
have a material adverse effect on the Company's business or financial condition
for the near future. However, future events, such as changes in existing laws
and regulations or their interpretation, more vigorous enforcement policies of
regulatory agencies, stricter or different interpretations of existing laws and
regulations or adoption of new laws and regulations, may require additional
expenditures by the Company, which expenditures may be material.

The Company also has employees engaged in offshore operations that are
covered by provisions of the Jones Act, the Death on the High Seas Act and
general maritime law, which laws operate to make the liability limits
established under state workers' compensation laws (which are applicable to the
Company's other employees) inapplicable to these employees and, instead, permit
them or their representatives to pursue actions against the Company for damages
or job related injuries, with generally no limitations on the Company's
potential liability.

In addition to government regulation, various private industry
organizations, such as the International Standards Organization, the American
Bureau of Shipping, the American Petroleum Institute, the American Society of
Mechanical Engineers and the American Welding Society, promulgate technical
standards that must be adhered to in the fabrication process.

INSURANCE

The Company maintains insurance against property damage caused by fire,
flood, explosion and similar catastrophic events that may result in physical
damage or destruction to the Company's facilities. The Company also maintains
general liability insurance, workers' compensation liability and maritime
employer's liability insurance. All policies are subject to deductibles and
other coverage limitations. Although management believes that the Company's
insurance is adequate, the Company may not be able to maintain adequate
insurance at rates that management considers commercially reasonable, nor may
such coverage always be adequate to cover all claims that may arise.

EMPLOYEES

The Company's workforce varies based on the level of ongoing operating
activity at any particular time. As of December 31, 2001, the Company employed
approximately 450 full-time production employees at its three operating
facilities, two of which are located in New Iberia, Louisiana and one in Lake
Charles, Louisiana. The Company also engages the services of subcontractors to
perform specific tasks in connection with certain projects. Management estimates
these subcontractors have in the past provided over 350 workers depending on the
volume and nature of Company projects. None of the Company's employees is
employed pursuant to a collective bargaining agreement, and the Company believes
that it has positive working relationships with its employees.

13


The Company's ability to compete depends substantially on its ability to
attract and retain skilled construction workers, primarily welders, fitters and
equipment operators. In addition, the Company's ability to expand its operations
depends primarily on its ability to increase its workforce. While the supply of
production workers has been historically limited, the recent reduced demand for
the Company's products and services has stabilized the demand for such services.
While the Company believes its relationship with its skilled labor force is
good, a significant increase in the wages paid by competing employers could
result in a reduction in the Company's skilled labor force, increases in the
wage rates paid by the Company, or both. If either of these occurs, in the
near-term, the profits expected by the Company from work in progress could be
reduced or eliminated and, in the long-term, to the extent such wage increases
could not be passed on to the Company's customers, the production capacity of
the Company could be diminished and the growth potential of the Company could be
impaired.

CAUTIONARY STATEMENTS

Certain statements included in this report and in oral statements made from
time to time by management of the Company that are not statements of historical
fact are forward-looking statements. In this report, forward-looking statements
are included primarily in the sections entitled "Business and Properties,"
"Legal Proceedings," and "Management's Discussion and Analysis of Financial
Condition and Results of Operations." The words "expect," "believe,"
"anticipate," "project," "plan," "estimate," "predict," and similar expressions
often identify forward-looking statements. Such statements may involve risks and
uncertainties and include, among other things, information as to possible future
increases in oil and gas prices and drilling activity and the effect of current
and future levels of prices and drilling activity on demand for products and
services of the Company, on the prices the Company can obtain for its products
and services and on the profitability of the Company. All such statements are
subject to factors that could cause actual results and outcomes to differ
materially from the results and outcomes predicted in the statements, and
investors are cautioned not to place undue reliance upon them. Those factors
include the risks described immediately below and elsewhere in this report.

THE COMPANY'S ABILITY TO REMAIN A GOING CONCERN IS IN QUESTION.

The Company's credit facility requires the Company to make a $6 million
principal payment by June 30, 2002. The Company currently does not have the
liquid asset necessary to meet this requirement. Substantially all the Company's
operating assets are pledged to secure this obligation. Accordingly, there can
be no assurance that the Company will continue as a going concern through fiscal
2002.

THE COMPANY'S FINANCIAL POSITION AND RESULTS OF OPERATIONS SUBSTANTIALLY
DETERIORATED DURING THE 2001 FISCAL YEAR.

As a result, many potential customers did not invite the Company to bid on
long-term construction contracts. In addition, the Company was not able to bid
competitively on contracts that required substantial financial performance bonds
because of our inability to post the collateral necessary to secure the bonds.
If this situation continues, the Company may be unable to bid on enough
construction contracts to sustain its overhead, and could be forced to cease its
operations.

THE COMPANY'S WORKING CAPITAL DECREASED SUBSTANTIALLY DURING 2001.

The Company does not anticipate that the Bank Group will extend any
additional borrowings to the Company under the Credit Agreement. In addition,
the Credit Agreement, as amended, provides that the Company will have only
limited access to the proceeds of any sale of the Company's assets during the
term of the Credit Agreement; remaining proceeds must be applied to reduce
amounts that the Company owes under the Credit Agreement. If the Company's
working capital position does not improve during 2002, the Company may be forced
to cease its operations.

THE DEMAND FOR OUR SERVICES IS CYCLICAL AND DEPENDS ON THE LEVEL OF ACTIVITY IN
THE OIL AND GAS INDUSTRY; DECREASES IN OIL AND GAS ACTIVITY COULD REDUCE DEMAND
FOR OUR SERVICES AND RESULT IN LOWER REVENUE.

14


We fabricate decks and modules of drilling and production equipment for
offshore oil and gas platforms. We also design and fabricate drilling rigs,
production process systems, and drilling masts. The purchasers of our products
and services are oil and gas companies and installation contractors for oil and
gas companies. Thus, the demand for our services depends on the condition of the
oil and gas industry and, in particular, the level of capital expenditures of
oil and gas companies that operate in offshore oil and gas producing areas
throughout the world. Oil and gas prices and drilling activity have become
depressed as compared to prices and activity levels at the end of 2000 and the
beginning of 2001.

A prolonged reduction in oil or natural gas prices in the future would
likely depress offshore drilling and development activity. A substantial
reduction of this activity could reduce demand for our services and could
substantially reduce our revenues.

OUR FINANCIAL CONDITION HAS DETERIORATED AND MAY PREVENT OIL & GAS COMPANIES
FROM USING OUR SERVICES.

If our financial condition does not improve, customers may not permit the
Company to bid on long-term construction projects. Furthermore, the Company may
not have the financial resources to post financial performance bonds, and thus
may be unable to assume other projects.


OUR BUSINESS REQUIRES A STEADY SUPPLY OF SKILLED WORKERS, AND WE MAY NOT BE ABLE
TO RETAIN AND ATTRACT ENOUGH OF THEM, IN WHICH CASE OUR RESULTS WILL LIKELY BE
IMPAIRED.

Our financial results depend substantially on our ability to retain and
attract skilled construction workers, primarily welders, fitters and equipment
operators. We currently employ approximately 360 skilled workers, which is
significantly lower than the number we employed in fiscal 1999 and Transition
2000 during periods of greater activity. We may not be successful in increasing
our workforce to meet any future increases in demand for our services, in which
case we may lose contracts and, for contracts we obtain, our profit margins may
be reduced as a result of the need to pay overtime rates to a limited workforce.
Moreover, our ability to expand depends primarily on our ability to increase our
skilled workforce. The demand for skilled workers in south Louisiana is high and
the supply of skilled workers is extremely limited, and we may not succeed in
increasing the size of our workforce through acquisitions, training, or new
hiring programs. Although we believe that a large number of trainable workers
reside reasonably close to our facilities, we may not be successful in
recruiting and training them due to a variety of factors, including the current
skill levels of workers, the potential inability or lack of desire by workers to
commute to our facilities or to relocate to areas closer to them, and
competition for workers from other industries. While we believe that our wage
rates are competitive and that our relationship with our skilled workforce is
good, a significant increase in the wages paid by competing employers could
result in a reduction in our skilled workforce, increases in the wage rates
paid, or both. If either of these events occur, in the near term, our profits
from work in progress would be reduced or eliminated and, in the long term, our
production capacity and revenues could be diminished and our growth potential
could be impaired.

OUR BACKLOG IS LOW AND IF CUSTOMERS TERMINATE PROJECTS OUR REPORTED BACKLOG
COULD DECREASE, WHICH COULD SUBSTANTIALLY REDUCE OUR REVENUE.

Our backlog is based on our estimate of the remaining labor, material and
subcontracting costs to be incurred for projects on which a customer has
authorized us to begin work or purchase materials pursuant to written contracts,
letters of intent, or other forms of authorization. Our customers retain the
right to change or to terminate most projects in our backlog, either of which
could substantially change the amount of backlog currently reported. In the case
of a termination, the customer is generally required to pay for our work
performed and materials purchased through the date of termination, and in some
cases, pay us termination fees. Due to the large dollar amounts of backlog
estimated for each of a small number of projects, however, amounts included in
our backlog could decrease substantially if one or more of these projects were
to be terminated by our customers. Approximately 30% of our backlog at December
31, 2001 was attributable to three projects. Termination of one or more of these
large projects could have a material

15


adverse effect on our revenue for 2002.

OUR OPERATIONS ARE HAZARDOUS TO PERSONS AND PROPERTY, AND OUR LIABILITY FOR
INJURIES OR DAMAGES COULD RESULT IN SUBSTANTIAL LOSSES TO US.

Our operations involve a high degree of risk, particularly of personal
injury or loss of life, severe damage to and destruction of property and
equipment and suspension of operations. The failure of our structures during and
after installation can result in similar injuries and damages for which we could
be liable. We also have employees engaged in offshore operations that are
covered by provisions of the Jones Act, the Death on the High Seas Act and
general maritime law. These laws operate to make the liability limits
established by state workers' compensation laws (which cover our other
employees) inapplicable to these employees and, instead, permit them or their
representatives to pursue actions against us for damages for job-related
injuries, with generally no limitations on our potential liability. In addition,
due to their proximity to the Gulf of Mexico, our facilities are subject to the
possibility of physical damage caused by hurricanes or flooding. Although we
maintain such insurance protection as we consider economically prudent, our
insurance may not be sufficient under all circumstances or against all claims or
hazards, nor do we carry insurance for the loss of profits that may result from
these hazards. A successful claim or damage resulting from a hazard for which we
are not fully insured could result in substantial losses to us. Moreover, we may
not be able to maintain adequate insurance in the future at rates that we
consider economically prudent.

PRODUCTS THAT WE FABRICATE FOR INSTALLATION IN OR OFFSHORE CERTAIN FOREIGN
COUNTRIES EXPOSE US TO COLLECTION RISKS; LAWS AND REGULATIONS IN CERTAIN
COUNTRIES MAY IN THE FUTURE PUT US AT A COMPETITIVE DISADVANTAGE WITH LOCAL
FABRICATORS IN THOSE COUNTRIES.

Most of the structures that we fabricate, even those made for overseas
installation, are delivered to our customers at our Port of Iberia facility and,
upon making delivery at that facility, we receive payment in United States
dollars.

For structures made for installation in or offshore certain countries,
however, particularly Brazil, Egypt, and Mexico, as to which either our customer
or the ultimate recipient of our work is a state-owned oil and gas company,
payment is subject to delays in collection and a risk of non-collection. The
amount of our accounts receivable for foreign deliveries to Egypt, West Africa
and Mexico not secured by letters of credit was approximately $3.0 million as of
December 31, 2001. The write-off of all or a substantial amount of those
receivables this year or comparable amounts in future years could result in a
significant reduction in our current assets and net income.

Brazil has adopted, and we believe that Nigeria and Venezuela are
considering the adoption of, laws and regulations that favor or require the
awarding of contracts to local contractors or that require foreign contractors
to employ citizens of a particular jurisdiction or to purchase supplies from a
particular jurisdiction. In response to these developments, we have established
a small facility in Nigeria that uses local laborers whom we have trained in
certain skills and knowledge. We may take similar action in Brazil and
Venezuela. Some of the foreign countries in which we do business also impose
import-export quotas, import duties and fees, or foreign taxes on our goods and
services. Although none of these quotas, duties, fees, taxes or regulations
currently impact our business or any of our international projects materially,
their possible future effect would be to put us at a competitive disadvantage to
fabricators from those countries and this could impede our continued presence or
growth in those countries.

WE COULD INCUR LOSSES UNDER OUR FIXED-PRICE CONTRACTS AS A RESULT OF COST
OVERRUNS OR DELAYS IN DELIVERY.

Most of our projects are performed pursuant to fixed-price contracts,
although some projects are performed on a time and materials basis. Under
fixed-price contracts, we receive the price fixed in the contract, subject to
adjustment only for change orders placed by the customer. We are responsible for
all cost overruns, which could occur for various reasons, including errors in
estimates or bidding, changes in the availability and cost of labor and material
and variations in productivity from the original estimates.

16


This could result in reduced profitability or losses on projects and, depending
on the size of a project, could significantly reduce our earnings in any fiscal
quarter or year. Most of our fixed-price contracts also provide for incentive
payments for early delivery of projects and liquidated damages for late
delivery. If we were to miss the delivery date specified by any of our
contracts, whether due to equipment problems, labor shortages, adverse weather
conditions or other causes, we could be subject to liquidated damages that could
significantly reduce our profitability.

Under time and materials arrangements, we receive a specified hourly rate
for direct labor hours (which exceeds our direct labor costs) and a specified
percentage mark-up over our cost for materials. Under these contracts, we are
protected against cost overruns but do not benefit directly from cost savings.

INACCURATE ESTIMATES MADE IN OUR PERCENTAGE-OF-COMPLETION ACCOUNTING COULD
RESULT IN A REDUCTION OF PREVIOUSLY REPORTED PROFITS.

Most of our revenue and expenses are recognized on a
percentage-of-completion basis determined by the ratio that labor, labor and
subcontracting costs, or total contract costs incurred to date bear to the total
estimated labor, labor and subcontract costs, or total estimated contract costs
required for completion. We review expected labor hours, costs and profits
monthly as the work progresses, and make adjustments proportionate to the
percentage of completion in revenue for the period when the estimates are
revised. To the extent that these adjustments result in a reduction of
previously reported profits, we must recognize a charge against current
earnings, which may be significant depending on the size of the project or the
adjustment.

OUR REVENUE FOR ANY FISCAL QUARTER CAN DECLINE AS A RESULT OF INCLEMENT WEATHER
AND SEASONAL DECREASES IN DAYLIGHT HOURS.

Our operations are subject to seasonal variations in weather conditions and
daylight hours. Because most of our construction activities take place outdoors,
the average number of direct labor hours worked per day generally declines in
winter months due to an increase in rainy and cold conditions and a decrease in
daylight hours. Operations may also be affected by the rainy weather, hurricanes
and other storms prevalent along the Gulf Coast throughout the year. As a
result, our revenue during the quarter ending December 31 are subject to being
disproportionately low as compared to the quarters ending June 30 and September
30, and full year results may not in all cases be a direct multiple of any
particular quarter or combination of quarters.

THE LOSS OF A SIGNIFICANT CUSTOMER COULD RESULT IN A SUBSTANTIAL LOSS OF
REVENUE.

A large portion of our revenue has historically been generated by a few
customers, although not necessarily the same customers from year to year. For
example, customers individually accounting for more than 10% of our annual
revenue accounted as a group for 19% (one customer), 21% (two customers) and 26%
(two customers) of revenue for the year ended December 31, 2001, the nine month
period ended December 31, 2000, and the fiscal year ended March 31, 2000,
respectively.

Although our direct customers on many projects are installation contractors,
each project is ultimately fabricated for use by an oil and gas company. Thus,
concentration among our customers may be greater when the customer is viewed as
the oil and gas company rather than the installation contractor. We contract
from time to time with multiple installation contractors who may be supplying
structures to the same oil and gas company and in some instances contract
directly with the oil and gas company.

The prime contractors who account for a significant portion of revenue in
one fiscal year may represent an immaterial portion of revenue in subsequent
years. The loss, however, of any significant customer (whether an oil and gas
company with which we directly contract or a prime contractor for which we have
provided services on a subcontract basis) could result in a substantial loss of
revenue.

Recent consolidation in the oil and gas industry may tend to increase the
concentration of our work with significant customers and may also increase the
power of some important customers to obtain price

17


concessions from us.

OUR BUSINESS IS VERY COMPETITIVE, AND LOW LEVELS OF DEMAND FOR OUR SERVICES HAVE
FORCED US TO REDUCE PRICES FOR OUR PRODUCTS. THIS HAS INCREASED OUR OPERATING
LOSSES AND, BECAUSE OF WORKFORCE REDUCTIONS, OUR ABILITY TO BENEFIT FROM FUTURE
INCREASES IN DEMAND MAY BE DIMINISHED.

The offshore platform fabrication industry is highly competitive and
influenced by events largely outside the control of offshore platform
fabrication companies. Contracts for our services are generally awarded on a
competitive bid basis with customers usually requesting bids on projects from
one to three months prior to commencement. Price and the contractor's ability to
meet a customer's delivery schedule are the principal factors in determining
which qualified contractor is awarded a contract for a project. We compete with
both large and small companies, and some of them have greater financial and
other resources than we do. Recently, small companies that can perform some of
the kinds of fabrication work that we do have entered the market. Thus, the
number of companies that perform fabrication services to the oil and gas
industry has increased. The intense competition we face in our industry,
especially in periods of low demand, keeps us from raising our prices and can
limit or decrease our revenue. Until bidding activity by oil and gas companies
results in the awarding of new fabrication contracts, particularly contracts for
larger structures, the bidding on smaller projects will remain very competitive.
In order to obtain sufficient work to maintain a productive workforce, we must
reduce prices on these smaller projects. These prices can be below our cost and,
if demand for our fabrication services remains low, we may be required to make
further reductions in the number of skilled craftsmen and supervisors we employ
and other cost reductions. After we reduce our workforce, we may not be able to
replace them in sufficient numbers to respond to increased demand.

OUR OPERATIONS ARE SUBJECT TO EXTENSIVE GOVERNMENTAL REGULATION, COMPLIANCE WITH
WHICH IS EXPENSIVE; CHANGES IN THE REGULATORY ENVIRONMENT CAN OCCUR AT ANY TIME
AND GENERALLY INCREASE OUR COSTS.

Our operations and properties are subject to and affected by various types
of governmental regulation, including numerous federal, state and local
environmental protection laws and regulations, compliance with which is becoming
increasingly complex, stringent and expensive. Some of these laws provide for
"strict liability" for damages to natural resources or threats to public health
and safety, rendering a party liable for environmental damage without regard to
its negligence or fault. Sanctions for noncompliance may include revocation of
permits, corrective action orders, administrative or civil penalties and
criminal prosecution. We are subject to claims for personal injury or property
damage as a result of alleged exposure to hazardous substances.

The laws and regulations that affect our operations most extensively are
primarily the Occupational Safety and Health Act and to a lesser extent the
federal and state laws and regulations enforced by the Environmental Protection
Agency and the Louisiana Department of Environmental Quality. Those
environmental laws include the Comprehensive Environmental Response,
Compensation, and Liability Act, the Resource Conservation and Recovery Act, the
Clean Air Act, the Clean Water Act, and the Safe Drinking Water Act. We incur
costs as a result of safety procedures and inspections made necessary by the
Occupational Safety and Health Act and for environmental license and permit
fees, and containment and disposal of wastes, including sand from sand blasting,
lead from paint and paint thinners, oil leaked from machinery and vehicles, and
storm and drain runoff water. Although these costs have not been material, any
significant change in, or in the enforcement of, these laws and regulations
could increase our expenses and thus render more difficult our ability to
compete. We anticipate that environmental control and protection laws and
regulations will become increasingly stringent and result in more compliance
costs for us.

Because we depend on the demand for our services from the oil and gas
industry, the adoption of laws and regulations curtailing exploration and
development drilling for oil and gas for economic, environmental and other
policy reasons could reduce the demand for our services and, ultimately, our
revenue. For example, if oil and gas drilling is restricted or forbidden in
additional areas in the waters offshore the U. S. Gulf of Mexico or elsewhere,
the activities of our customers in those areas would be reduced and our revenues
would likely decline.

18


WE ARE DEPENDENT ON KEY PERSONNEL; THE LOSS OF THEIR SERVICES COULD RESULT IN
INEFFICIENCIES IN OUR OPERATIONS, LOST BUSINESS OPPORTUNITIES, OR THE LOSS OF
ONE OR MORE OF OUR CUSTOMERS.

Our success depends on, among other things, the continued active
participation of our officers and key operating personnel. We currently have no
employment contracts with our key employees except for two key employees in our
fabrication operations, and three members of our executive management team. The
loss of the services of any of our key employees could result in inefficiencies
in our operations, lost business opportunities, or the loss of one or more of
our customers.



















19


WE DO NOT INTEND TO PAY DIVIDENDS IN THE NEAR FUTURE; THUS, AN INVESTOR IN OUR
COMMON STOCK SHOULD NOT EXPECT TO RECEIVE PERIODIC INCOME ON AN INVESTMENT IN
OUR COMMON STOCK.

We currently intend to retain earnings, if any, to meet our working capital
requirements and to finance the future operation and growth of our business and,
therefore, do not plan to pay cash dividends to holders of our Common Stock in
the near future. An investor in our common stock should not expect to receive
periodic income on an investment in our common stock.

ITEM 3. LEGAL PROCEEDINGS.

The Company is a party to various routine legal proceedings primarily
involving commercial claims, workers' compensation claims, and claims for
payments on open account, as described below. While the outcome of these
lawsuits, legal proceedings and claims cannot be predicted with certainty,
management believes that, except as set forth below, the outcome of all such
proceedings, even if determined adversely, would not have a material adverse
effect on the Company's business or financial condition.

A number of the Company's vendors have sued the Company to collect amounts
of money allegedly due to them. These vendors are, in each case, unsecured
creditors of the Company. If these lawsuits collectively are prosecuted to
conclusion and the Company is unable to pay any judgments rendered against it,
the Company will be in default of the Credit Agreement. Substantially all of the
Company's assets secure its obligations under the Credit Agreement.

ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS.

Not applicable.















20


EXECUTIVE OFFICERS OF THE REGISTRANT

Listed below are the names, ages and offices of each of the executive
officers of the Company as of December 31, 2001:

NAME AGE POSITION
---------------------- --- ---------------------------------------
Jerome E. Chojnacki... 65 Chairman of the Board, President and
Chief Executive Officer
Martin K. Bech........ 33 Vice President, Secretary and General
Counsel
Vincent J. Cuevas..... 54 Vice President
Glenn D. Gros......... 52 Vice President
Kenneth J. Legnon..... 54 Vice President
Philip J. Patout...... 54 Vice President
Peter J. Roman........ 51 Vice President and Chief Financial
Officer

JEROME E. CHOJNACKI was named President, Chief Executive Officer and
Chairman of the Board of Directors of the Company effective October 1, 2001. Mr.
Chojnacki has over 40 year of business management experience. He has served in a
variety of top management positions and has owned and operated several
businesses engaged in fabrication and manufacturing, engineering design services
and mechanical contracting. Mr. Chojnacki currently owns and operates a
management consulting firm, Chojnacki & Associates, Houston, Texas, which was
established in 1979. Principal areas of expertise include operations, marketing
and financial management, merger and acquisition, and turn around and work out
consulting. Mr. Chojnacki obtained a Bachelor of Science degree in Mechanical
Engineering from the University of Wisconsin. Mr. Chojnacki became the
President, Chief Executive Officer and Chairman of the Board of Directors upon
the retirement, effective October 1, 2001, of Dailey J. Berard. Mr. Berard was
the founder of the Company and served in the above offices of the Company since
its inception in 1980.

MARTIN K. BECH was hired as General Counsel of the Company on April 16, 2001
and was appointed Secretary of the Company on June 1, 2001 and Vice President of
the Company on August 2, 2001. Mr. Bech earned two bachelor's degrees in 1990
from Louisiana State University and his Juris Doctorate in 1996 from Loyola
University School of Law in New Orleans. Mr. Bech was an associate in the New
Orleans office of the regional law firm of Phelps Dunbar, LLP from March 1997
until March 2001.

VINCENT J. CUEVAS was appointed Vice President of the Company on June 20,
2000. He also serves as President of Allen Process Systems. Mr. Cuevas is a
mechanical engineer with a B.S.M.E degree from the University of Mississippi and
has over 30 years of experience in the oil and gas industry. He began his career
with National Tank Co. in 1970 and last served as regional sales and marketing
manager from 1985 until 1988. He was with McDermott International, Inc. from
1976 to 1977, serving as Middle East project coordinator. Mr. Cuevas co-founded
Allen Tank in l988. Mr. Cuevas resigned from employment at the Company effective
March 1, 2002.

GLENN D. GROS was appointed Vice President of the Company on August 2, 2001.
Mr. Gros has over 28 years of experience in the industry, including 24 years
with J. Ray McDermott coordinating major oil and gas fabrication projects. Mr.
Gros also has a strong background in estimating, project management and
automating in the fabrication and manufacturing environments. Mr. Gros is a
registered Professional Engineer.

KENNETH J. LEGNON was appointed Vice President of the Company on November 6,
2001. Mr. Legnon has over 30 years of experience in the industry, including 5
years as Vice President Operations with the Company's OBI subsidiary. Prior to
joining OBI, Mr. Legnon was a co-owner and chief operating officer in several
businesses in the oilfield fabrication and services industry.

PHILIP J. PATOUT was appointed Vice President of the Company on June 20,
2000. He also served as President of OBI. He is a mechanical engineer and a
registered Professional Engineer in Louisiana with a degree from the University
of Southwest Louisiana. Mr. Patout has over 30 years of experience in the oil
and gas industry ranging from sales to executive management. He founded
Mardrill, Inc. in 1980 and was

21


its President from 1980 to 1984. He was President of Mallard Drilling Inc. from
1976 to 1980. Mr. Patout resigned from employment at the Company effective
January 14, 2002.

PETER J. ROMAN was appointed Vice President and Chief Financial Officer of
the Company on June 30, 1997 and served as Secretary of the Company from May 1,
1998 until June 1, 2001. From June 1984 until June 1997, Mr. Roman was a
certified public accountant with the international accounting firm of Ernst &
Young LLP, serving most recently as a senior manager. Mr. Roman graduated from
Louisiana State University in 1984 with a B.S. degree in Accounting and is a
member of the Louisiana State Society of Certified Public Accountants and the
American Institute of Certified Public Accountants.


PART II

ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS.

The Company's Common Stock, $.01 par value per share (the "Common Stock"),
is traded on the Nasdaq National Market under the symbol "UFAB." At March 30,
2002, the Company had approximately 1,105 holders of record of its Common Stock
.

The Company currently does not meet the listing requirements of the Nasdaq
National Market. If the Common Stock is delisted, the Company intends seek
registration on the Nasdaq Small Cap Market. There can be no assurance, however,
that if delisted, the Common Stock will be actively traded on any organized
market.

The following table sets forth the high and low bid prices per share of the
Common Stock, as reported by the Nasdaq National Market, for each fiscal quarter
in the year ended December 31, 2001 and the nine-month period ended December 31,
2000.

HIGH LOW
------- ------
December 31, 2001
First Quarter $ 10.31 $ 6.25
Second Quarter 6.75 4.12
Third Quarter 5.08 1.53
Fourth Quarter 2.00 0.57

Transition 2000
First Quarter $ 8.50 $ 5.75
Second Quarter 13.00 6.81
Third Quarter 12.75 7.25

The Company intends to retain earnings, if any, to meet its working capital
requirements and to finance the future operations and growth of its business
and, therefore, does not plan to pay any cash dividends to holders of its Common
Stock in the foreseeable future.

The information appearing in the first two paragraphs immediately following
the caption "Private Placement and Resale Registration" in Items 1 and 2 of this
report is incorporated herein.




22




ITEM 6. SELECTED FINANCIAL DATA

NINE MONTHS
ENDED
YEAR ENDED DECEMBER 31 DECEMBER 31, YEAR ENDED MARCH 31 (1)
----------------------- -----------------------------------------------
2001 2000 2000 2000 1999 1998
---------- ---------- --------- ---------- ---------- ----------
(UNAUDITED)
(DOLLARS IN THOUSANDS, EXCEPT PER SHARE DATA)

Statement of Operations Data:
Revenue.............................. $ 81,733 $ 77,692 $ 60,385 $ 73,124 $ 103,866 $ 109,170
Cost of revenue...................... 79,244 80,876 63,387 66,431 85,311 91,777
Gross profit (loss)................. 2,489 (3,184) (3,002) 6,693 18,555 17,393
General and administrative expense... 7,417 8,704 6,685 8,160 9,058 6,807
Operating income (loss).............. 4,928 (11,888) (9,687) (1,467) 9,497 10,586
Other income (expense), net.......... (23,965) (2,070) (1,627) (1,289) (890) (470)
Income (loss) before income taxes.... (25,571) (13,958) (11,314) (2,756) 8,607 10,116
Income tax expense (benefit)......... 1,316 (4,832) (4,048) (685) 2,264 2,896
Net income (loss).................... (29,281) $ (9,126) $ (7,266) $ (2,071) $ 6,343 $ 7,220
Earnings (loss) per share............
Basic $ (3.60) $ (1.27) $ (1.00) $ (0.31) $ 1.06 $ 1.39
Diluted $ (3.60) $ (1.27) $ (1.00) $ (0.31) $ 1.06 $ 1.38
Weighted average shares outstanding .
Basic 8,142 7,154 7,270 6,723 5,972 5,192
Diluted 8,142 7,154 7,270 6,723 5,972 5,213
Cash dividends declared per common $ - $ - $ - $ - $ - $ 1.03
share (2)
Pro forma data: (3)
Income before income taxes $ 8,607 $ 10,116
Pro forma provision for income taxes 2,863 3,595
-----------------------
Pro forma net income $ 5,744 $ 6,521
=======================
Pro forma basic earnings per share $ 0.96 $ 1.26
=======================
Pro forma diluted earnings per share $ 0.96 $ 1.25
=======================
Other Financial Data:
Depreciation and amortization........ $ 3,043 $ 2,965 $ 2,358 $ 2,757 $ 2,142 $ 1,265
Capital expenditures................. 2,293 7,308 4,688 7,557 9,640 5,472
Net cash provided by (used in)
operating activities................ (94) (4,089) (1,943) (678) 1,997 8,661
Net cash used in investing
activities.......................... (2,293) (7,130) (4,510) (7,358) (11,112) (10,273)
Net cash provided by financing
activities.......................... 2,047 10,492 7,268 7,100 1,878 9,001
Operating Data:
Direct labor hours worked............ 1,176,000 1,166,000 934,000 1,040,000 1,324,000 1,409,000
Number of employees (at end of period) 450 674 674 600 416 685
Backlog (at end of period)........... $ 8,333 $ 27,000 $ 27,000 $ 19,231 $ 27,088 $ 50,340


AS OF DECEMBER 31, AS OF MARCH 31,
--------------------- ----------------------------
2001 2000 2000 1999 1998
---------- -------- --------- -------- --------
Balance Sheet Data:
Working capital (deficit)..... $ (15,513) $ 11,813 $ (3,789) $ 11,009 $ 12,925
Property, plant and equipment, 34,125 34,549 31,708 23,259 13,333
net...........................
Total assets.................. 63,207 82,654 84,651 70,021 59,710
Debt.......................... 23,368 20,303 24,720 17,579 12,177
Shareholders' equity.......... 14,133 47,990 44,268 39,567 33,202


(1) All financial information has been restated for the pooling with Allen Tank.
The effects of all other acquisitions were accounted for as purchase
transactions and have been included from the effective date of the
acquisition.
(2) Under the provisions of a shareholders' agreement, unless otherwise approved
by the board of directors, Universal Fabricators was to distribute to its
shareholders 90% of its net income for the prior fiscal year. This agreement
was terminated upon completion of the Initial Public Offering. The Company
intends to retain earnings, if any, to meet its working capital requirements
and to finance the future operation and growth of its business, and
therefore, does not plan to pay cash dividends to holders of its common
stock in the foreseeable future.
(3) Includes pro forma effect for the application of federal and state income
taxes on the earnings of Allen Tank, Inc. as if it had always been a C
Corporation. Prior to the merger with the Company, Allen Tank, Inc. had
operated as an S Corporation. Allen

23


Tank, Inc. elected to terminate its S Corporation status on the date of the
transaction and as a result became subject to corporate level income
taxation.

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS

GENERAL

The following discussion presents management's discussion and analysis of
the Company's financial condition and results of operations and should be read
in conjunction with the Consolidated Financial Statements.

The Company's results of operation and financial condition deteriorated
dramatically in 2001 for the reasons explained in this Annual Report on Form
10-K. In significant ways, the Company's declining financial condition impacted
its ability to compete for contracts and labor, two important ingredients in the
Company's historic profitability. Oil and gas prices have declined recently and
drilling activity has significantly declined in the Company's primary market,
the Gulf of Mexico. The Company does not expect recovery of fabrication prices
or substantial increases in fabrication projects in the near future. The Company
must experience a marked improvement in 2002, or its ability to remain a going
concern will be in question.

The Company's results of operations depend primarily on (i) the level of oil
and gas exploration and development activity of oil and gas companies in the
Gulf of Mexico, offshore West Africa, South and Central America and the Middle
East; (ii) the Company's ability to win contracts through competitive bidding or
alliance/partnering arrangements; and (iii) the Company's ability to manage
those contracts to successful completion. The level of exploration and
development activity is related to several factors, including trends of oil and
gas prices, exploration and production companies' expectations of future oil and
gas prices and changes in technology which reduce costs and improve expected
returns on investment. In addition, improvements in three-dimensional seismic,
directional drilling, production techniques and other advances in technology
have increased drilling success rates and reduced costs. Although we believe our
operations depend these indicators, the correlation of those measures with our
revenue is not direct as to timing and level.

During the year ended December 31, 2001, Transition 2000 and the fiscal year
ended March 31, 2000, 21%, 22% and 51%, respectively, of the Company's revenue
was derived from projects fabricated for installation in international areas,
with the remainder designed for installation in the Gulf of Mexico. The Company
believes that its strong presence in both overseas markets and the Gulf of
Mexico market historically enabled it to remain competitive and obtain
fabrication work worldwide.

Most of the Company's revenue and expenses are recognized on a
percentage-of-completion basis determined by the ratio that labor, labor and
subcontracting costs, or total contract costs incurred bear to the total
estimated labor, labor and subcontracting costs or total contract costs required
for completion. Accordingly, expected labor and subcontracting costs and other
contract costs are reviewed monthly as the work progresses, and adjustments
proportionate to the percentage of completion are reflected in revenue for the
period when such estimates are revised. To the extent that these adjustments
result in a reduction of previously reported profits, the Company would have to
recognize a charge against current earnings, which may be significant depending
on the size of the project or the adjustment. Revenue from time and materials
contracts is recognized on the basis of direct labor hours worked at fixed
hourly rates and the cost of materials or subcontract costs incurred plus
mark-up.




24


RESULTS OF OPERATIONS

COMPARISON OF THE YEAR ENDED DECEMBER 31, 2001 AND YEAR ENDED DECEMBER 31, 2000
(UNAUDITED)

During the year ended December 31, 2001, the Company's revenue was $81.7
million, a 5% increase from the $77.7 million revenue in the year ended December
31, 2000. This increase was mainly caused by increases in manhours worked at the
Company's deep-water facility in Lake Charles, which revenue increased 54% to
$8.1 million in the year ended December 31, 2001. In addition, pricing in the
structural fabrication business improved slightly in 2001 compared to the prior
year. Volume in the Company's international project management business was $7.1
million, an increase of 69% over the prior year. These increases were offset in
part by approximately 17% reductions in the domestic process systems and barge
repair revenue to $30.3 million in the year ended December 31, 2001. Direct
labor hours worked in all facilities was approximately the same in the year
ended December 31, 2001 as in the year ended December 31, 2000.

Cost of revenue was $79.2 million in the year ended December 31, 2001,
compared to $80.9 million in the year ended December 31, 2000. Cost of revenue
consists of costs associated with the fabrication process, including direct
costs (such as direct labor costs and raw materials) and indirect costs that can
be specifically allocated to projects (such as supervisory labor, utilities,
welding supplies and equipment costs). The decrease in cost as a percentage of
revenue in the year ended December 31, 2001, was mainly due to improved margins
in structural fabrication offset in part by costs in excess of revenue at the
Company's deep-water facility in Lake Charles, where the Company incurred cost
overruns on two jack up repair projects which were the first substantial
projects at the facility. The Company also recorded contract loss reserves of
$1.1 million on a first of a kind liftboat being constructed in the Company's
barge repair facility in New Iberia.

SG&A costs were lower in the year ended December 31, 2001 compared to the
same period in 2000 both in gross dollars and as a percentage of revenue. This
decrease reflects the shut down of the Company's barge repair facility in New
Iberia, which had been underutilized, overall consolidation of support functions
and staff reductions in both New Iberia and Lake Charles, mainly in the December
quarter of 2001. In addition, last year was negatively impacted by the write off
of a $400,000 receivable from a customer who filed for bankruptcy under Chapter
7. In the December 2001 quarter, we collected $1.6 million on a receivable that
had been written off in the September 2001 quarter.

Depreciation and amortization in the year ended December 31, 2001 was $3.0
million compared to $2.9 million in the year ended December 31, 2000.
Depreciation increased 25% to $2.6 million in the year ended December 31, 2001
due mainly to the commencement of operations at the Lake Charles facility. This
increase was offset by a decrease in amortization expense as a result of the
write off in September 2001 of substantially all of the Company's recorded
goodwill.

Other expense in the year ended December 31, 2001 included the recording of
$14.8 million impairment charge on goodwill, $4.8 million loss on the disposal
of equipment and the shut down of the Company's barge repair facility in New
Iberia, and the recording of $700,000 of commitment fees associated with the
Waiver and Amendment to the Company's Secured Credit Agreement, which was
executed April 2, 2001. These monthly fees were incurred as a result of the
Company being out of compliance with the terms of the Waiver and Amendment.

Interest expense increased in the year ended December 31, 2001 to $2.8
million from $2.3 million in the same period last year. The increase is the
result of the Company being out of compliance with the terms of the credit
agreement, which resulted in increased interest margins being paid on amounts
outstanding under the agreement.

Income tax expense of $1.3 million was recognized in the year ended December
31, 2001 compared to an income tax benefit of $4.8 million in the year ended
December 31, 2000. The Company recorded an income tax provision of $2.6 million
in the September 2000 quarter to establish a valuation allowance against the
Company's net deferred tax assets. In accordance with FAS 109, the Company
considered that it

25


had a cumulative pre-tax loss for recent years and revised its judgment about
the realization of the deferred tax assets. The valuation allowance reflects the
Company's judgment that it is more likely than not that a portion of the
deferred tax assets will not be realized. The Company believes that the
remaining deferred tax assets at December 31, 2001 are realizable.

COMPARISON OF THE NINE MONTHS ENDED DECEMBER 31, 2000 AND NINE MONTHS ENDED
DECEMBER 31, 1999 (UNAUDITED)

Effective December 31, 2000, the Company changed its fiscal year-end to
December 31 of each year. The period from April 1, 2000 to December 31, 2000
represents a transition period of nine months which is referred to as the nine
months ended December 31, 2000. The presentation below compares the operating
results for the nine months ended December 31, 2000 to the nine months ended
December 31, 1999, which period was unaudited. In our opinion, all normal
recurring adjustments that are necessary for a fair presentation of the
statement of operations have been reflected in the consolidated financial
statements for these periods.

During the nine months ended December 31, 2000, the Company's revenue was
$60.4 million, an 8% increase from the $55.8 million generated in the nine
months ended December 31, 1999. This increase was primarily caused by an
increase in manhours worked offset in part by comparatively lower pricing levels
experienced in the current period caused by a general reduction in demand for
the Company's structural fabrication services, and, process equipment design and
fabrication services, both in the Gulf of Mexico and internationally. Structural
fabrication, rig refurbishment and plant maintenance revenue increased
approximately 49% from $29.5 million to $44.1 million. This was offset in part
by a decrease of 46% in process equipment design and fabrication revenue from
$23.8 million to $13.0 million. International project management revenue
increased 68% from $2.4 million to $4.0 million. Total direct labor hours worked
increased 13% from the levels experienced in the prior period particularly
during the quarter ended September 30, 2000. This activity has not resulted in
higher prices. We estimate that lower prices in the nine-month period ended
December 31, 2000 resulted in the revenue per man-hour for that period being
approximately 30% lower than the revenue per man-hour in the nine-month period
ended December 31, 1999.

Cost of revenue was $63.2 million in the nine months ended December 31,
2000 compared to $48.9 million in the nine months ended December 31, 1999. Cost
of revenue consists of costs associated with the fabrication process, including
direct costs (such as direct labor costs and raw materials) and indirect costs
that can be specifically allocated to projects (such as supervisory labor,
utilities, welding supplies and equipment costs). The increase in costs compared
to revenues reflects reduced margins for all services from the same period last
year caused by the decreased demand noted above and the increased competition
for the projects being awarded. In addition, cost of labor has increased by
approximately 4.4% in the nine month period ended December 31, 2000 compared to
the same period last year. Our cost of sales for the nine months ended December
31, 2000 included $2.0 million in loss reserves on two-fixed price fabrication
contracts. These contracts have been completed and loaded out. Additionally, we
recognized $1.6 million in contract costs on a new-build liftboat. In part,
these costs were overruns from development costs on this first of a kind
liftboat. We believe there will be strong market demand for this type of vessel.
In part the cost overruns relate to start up costs at our OBI yard, which had
reduced its skilled worker and supervisor teams to critically low levels due to
the lack of demand back in December 1999, which is when the liftboat contract
was awarded. We completed this liftboat in January 2002. All three of these
contracts were awarded in December 1999 and January 2000, when there were few
projects being awarded and when pricing was poor. We recorded approximately
$300,000 cost in excess of revenue on a drilling rig project brought into our
Lake Charles facility. These costs were incurred to get this semi submersible
drilling rig into the facility and introduce the facility. We completed final
negotiations and wrote off a $670,000 disputed billing on a contract which had
been completed in June 2000.

The nine month period ended December 31, 2000 was also negatively impacted
by poor weather conditions, in particular in the month of December. Cold, foggy
and wet weather reduced the productivity in our fabrication facilities. In fact,
there was only one day in the entire month of December that the weather

26


was appropriate to allow painting of fabricated structures. This delayed and
added to the cost of all projects in the yards, including the ones referred to
above.

Our SG&A remained approximately 10% of revenue for the nine month period
ended December 31, 2000. SG&A includes a $400,000 write off of a receivable from
a company which filed Chapter 7 in October 2000. Additionally, we started UNIFAB
Environmental, which designs and manufactures waste treatment facilities, and
realized start up costs for that operation in this time period.

Depreciation and amortization for the nine months ended December 31, 2000
were $2.2 million compared to $2.0 million for the same period last year.

Interest expense increased in the nine months ended December 31, 2000 to $1.8
million from $.9 million in the same period last year. This increase is the
result in increased interest rates over the period and an increase in the
average outstanding amount borrowed under our credit facility.


LIQUIDITY AND CAPITAL RESOURCES

Historically the Company has funded its business activities through funds
generated from operations, short-term borrowings on its revolving credit
facilities for working capital needs and individual financing arrangements for
equipment, facilities improvements, insurance premiums, and long-term needs.
During the year ended December 31, 2001, the Company's available funds and $2.0
million generated from financing activities together funded cash used in
operations and investing activities of $2.4 million. Investing activities
consisted mainly of capital expenditures of $2.3 million, including completion
of the Company's deep-water fabrication and drilling rig-refurbishing facility
in Lake Charles, Louisiana.

Capital expenditures included costs of expansion and improvements to the
Company's fabrication facility in New Iberia, purchases of modern, labor-saving
equipment and heavy machinery. The Company has also required capital
expenditures for equipment to update telecommunication and data processing
capabilities.

AMENDED AND RESTATED CREDIT AGREEMENT. On March 5, 2002, the Company entered
into a Waiver and Second Amendment to Amended and Restated Credit Agreement (the
"Amendment"). The Senior Secured Credit Agreement was originally entered into on
November 30, 1999, and was amended and restated October 19, 2000 with the same
syndicate of commercial banks led by Bank One, Louisiana, N.A., as agent (the
"Credit Agreement"). At December 31, 2001, the Company had $ 23.8 million
outstanding under the Credit Agreement, of which $1.2 million is for letters of
credit. During 2001, the Company increased the outstanding balance under the
Credit Agreement from $22.2 million to $23.8 million. The Credit Agreement is
secured by substantially all of the assets of the Company and provides
borrowings subject to certain borrowing base limitations based on 50% of the
appraised value of fixed assets (approximately $14.2 million at December 31,
2001) plus 80% of eligible accounts receivable (approximately $5.7 million at
December 31, 2001). At December 31, 2001, borrowings under the Credit Agreement
exceeded the borrowing base limit by $3.0 million. The Credit Agreement requires
the Company to make monthly interest payments, currently approximately $165,000
per month. Throughout 2001, the Company was out of compliance with the financial
covenants and certain other requirements of the Credit Agreement and as a result
paid interest at a rate that included a maximum variable interest margin. The
variable fee range for issued letters of credit is 1.25% to 2.75% per annum on
the principal amount of letters of credit issued for performance or payment, or
2% to 4% per annum on the principal amount if the letter of credit is a
financial letter of credit. The unused commitment fee range is 1/4% to 1% per
annum. The letter of credit fees and unused commitment fees are variable based
on the funded indebtedness to EBITDA ratio as defined in the Credit Agreement.

The Company was not in compliance with the terms of the Credit Agreement as
of December 31, 2001, as follows: tangible net worth was not sufficient to meet
the ratio to funded indebtedness required by one of the financial covenants;
adjusted earnings before taxes, depreciation and amortization for the year ended
December 31, 2001 were not sufficient to meet the ratio to funded indebtedness;
adjusted earnings before

27


taxes, depreciation and amortization for the year ended December 31, 2001 were
not sufficient to meet the ratio to fixed charges; the current ratio was not
sufficient to meet the minimum current ratio; and the net loss before taxes for
the quarter ended December 31, 2001 did not meet the required minimum net
income. At the request of the Company, the Bank Group executed the Amendment on
March 5, 2002, which waived the defaults of these financial covenants for the
period ended December 31, 2001. Under the terms of the Amendment, all new
advances as well as all existing advances bear interest at the prime lending
rate plus 3% (7.5% at March 31, 2002). The maturity of the Credit Agreement has
been extended to January 31, 2003. If the Company has not replaced the Credit
Agreement by January 31, 2003, or if the maturity date is accelerated due to non
performance under the terms of the Amendment, the Company will be required to
pay $450,000 to the Bank Group. The Amendment requires the Company to make
scheduled reductions totaling $8.0 million, $1.9 million of which was paid
concurrent with the execution of the Amendment on March 5, 2002, and the
remaining $6.1 million is due on June 30, 2002. In the event the Company is
unable to make the $6.0 million payment by June 30, 2002, the Company will be
required to pay up to $825,000 to the Bank Group. The Amendment allows the
Company to exceed the borrowing base limit up to $3.5 million until June 30,
2002, and limits the Company to the borrowing base limit beginning June 30,
2002. The Amendment requires the Company to diligently market for sale the
Company's deep water facility in Lake Charles, Louisiana. The Amendment revises
the financial covenants related to operating results to be consistent with the
Company's expected operating results. However, because the Amendment requires
substantial repayments by June 30, 2002, and the Company currently does not have
the resources to make such payments, there is a substantial risk that the
Company will be unable to maintain compliance with its obligations to its Bank
Group. The Amendment provides for additional borrowings under certain
conditions, mainly through the sale of assets or subsidiaries. The Company hopes
to replace the Credit Agreement with debt or equity financing before the
maturity date of January 31, 2003.

In the normal course of business, the management evaluates the Company's
capital structure and is considering alternatives to the current credit facility
structure. We would seek to replace the current commercial bank financing
arrangement with financing that is longer term in nature, including asset
financing, subordinated debt and equity capital. A new credit agreement or
financing arrangement may require higher interest and principal repayments,
requiring the Company to use more of its cash flow from operations to meet these
obligations. A new credit agreement or financing arrangement could further
restrict Company operations by, for example, limiting the ability of the Company
to make acquisitions and acquire assets. An alternative debt or equity
arrangement would likely involve the issuance of debt or preferred equity
securities that are convertible into shares of Company common stock. As a result
of any such conversion, existing shareholders could lose the control of the
Company that they now enjoy. Any of these new financing arrangements could
reduce the market value of Company shares.

NEW ACCOUNTING PRONOUNCEMENTS

In July 2001, the Financial Accounting Standards Board ("FASB") issued
Statement of Financial Accounting Standards ("SFAS") No. 141, "Business
Combinations". SFAS No. 141 requires that the purchase method of accounting be
used for all business combinations initiated after June 30, 2001. SFAS No. 141
also requires the recording of all acquired intangible assets that arise either
from contractual or legal rights, or that are separable from the acquired
entity. The Company adopted this accounting standard effective July 1, 2001, as
required and it had no impact on the Company's financial position.

In July 2001, FASB issued SFAS No. 142, "Goodwill and Other Intangible
Assets." SFAS No. 142 is effective January 1, 2001 and changes the accounting
for goodwill from an amortization method to an impairment-only approach.
Amortization of goodwill, including goodwill recorded in past business
combinations, will cease upon adoption of this statement. Goodwill was reduced
in 2001 by $15.2 million of which $14.8 million was recognized on the impairment
of recorded goodwill. Goodwill remaining on the balance sheet after the
impairment write down is not significant and adoption of SFAS No. 142 will have
no impact on the Company's financial position or results of operations.

SFAS No. 143, "Accounting for Asset Retirement Obligations", requires the
recording of liabilities for all legal obligations associated with the
retirement of long-lived assets that result from the normal operation of those
assets. These liabilities are required to be recorded at their fair values
(which are likely to be the

28


present values of the estimated future cash flows) in the period in which they
are incurred. SFAS No. 143 requires the associated asset retirement costs to be
capitalized as part of the carrying amount of the long-lived asset. The asset
retirement obligation will be accreted each year through a charge to expense.
The amounts added to the carrying amounts of the assets will be depreciated over
the useful lives of the assets. The Company is required to implement SFAS No.
143 on January 1, 2003, and we have not determined the impact that this
statement will have on our consolidated financial position or results of
operations.

SFAS No. 144, "Accounting for the Impairment or Disposal of Long-lived
Assets," promulgates standards for measuring and recording impairments of
long-lived assets. Additionally, this standard establishes requirements for
classifying an asset as held for sale, and changes existing accounting and
reporting standards for discontinued operations. The Company is required to
implement SFAS No. 144 on January 1, 2002, and does not expect the
implementation of this standard to have a material effect on our financial
position or results of operations.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

The Company's discussion and analysis of its financial condition and results
of operations are based upon the Company's consolidated financial statements,
which have been prepared in accordance with accounting principles generally
accepted in the United States. The preparation of these financial statements
requires the Company to make estimates and judgments that affect the reported
amounts of assets, liabilities, revenues and expenses, and related disclosures
of contingent assets and liabilities. On an on-going basis, the Company
evaluates its estimates, including those related to revenue recognition and
long-lived assets. The Company bases its estimates on historical experience and
on various other assumptions that are believed to be reasonable under the
circumstances, the results of which form the basis for making judgments about
the carrying values of assets and liabilities that are not readily apparent from
other sources. Actual results may differ from these estimates under different
assumptions or conditions. The Company believes the following critical
accounting policies affect its more significant judgments and estimates used in
the preparation of its consolidated financial statements.

Revenue from construction contracts, which are typically of short duration,
are recognized on the percentage-of-completion method, measured by relating
actual labor cost, labor and subcontract cost, or total estimated contract costs
for work performed to date to the estimated total labor cost, total labor and
subcontract cost or total contract cost of the respective contract. Contract
costs include all direct material and labor costs and those indirect costs
related to contract performance, such as indirect labor, supplies, and repairs.
Provisions for estimated losses, if any, on uncompleted contracts are made in
the period in which such losses are determined. Significant changes in cost
estimates due to adverse market conditions or poor contract performance could
affect estimated gross profit, possibly resulting in a contract loss.










29


The Company's customers are principally major and large independent oil and
gas companies and drilling companies. These concentrations of customers may
impact our overall exposure to credit risk, either positively or negatively, in
that our customers may be similarly affected by changes in economic or other
conditions. Reserves for uncollectible accounts receivable are evaluated
periodically against specific accounts that are known to be uncollectible.
Increases in the reserves for uncollectible accounts are charged to operating
results in the period they are identified. Receivables are generally not
collateralized. Significant adverse changes in the economic environment of the
oil and gas industry could result in materially lower collectibility of recorded
receivables and could require charge for uncollectible accounts in the future.

Long-lived assets held and used by the Company are reviewed for impairment
whenever events or changes in circumstances indicate that the carrying amount of
an asset may not be recoverable. The Company assesses the recoverability of
long- lived assets by determining whether the carrying values can be recovered
through projected net cash flows undiscounted and without interest charges,
based on expected operating results over their remaining lives. Future adverse
market conditions or poor operating results could result in the inability to
recover the current carrying value of the long-lived asset, thereby possibly
requiring an impairment charge in the future.

Income taxes have been provided using the liability method. Deferred income
taxes reflect the net effects of temporary differences between the carrying
amounts of assets and liabilities for financial reporting purposes and the
amounts used for income tax purposes. The amount of future income tax assets
recognized is limited to the amount of benefit that is more likely than not to
be realized. In assessing the realizability of deferred tax assets, management
considers whether it is more likely than not that some portion or the entire
deferred tax asset will not be realized. The ultimate realization of the
deferred tax assets is dependent upon the generation of future taxable income
during the periods in which those temporary differences become deductible.
Management considers the scheduled reversals of deferred tax liabilities, the
likelihood of future taxable income and tax planning strategies when making this
assessment. Based on this assessment, the Company records a valuation allowance
against deferred tax assets that are more likely than not unrealizable. The
amount of the deferred tax asset considered realizable, however, could be
reduced in the future if taxable income is not available to allow for the
deduction of the deferred tax assets.



ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

The Company is exposed to the risk of changing interest rates and foreign
currency exchange rate risks. The Company does not use derivative financial
instruments to hedge the interest or currency risks. Interest on approximately
$23.4 million, substantially all of the Company's notes payable, was variable,
based on short-term interest rates. A general increase of 1.0% short-term market
interest rates would result in additional interest cost of $234,000 per year if
the Company were to maintain the same debt level and structure.

The Company has a subsidiary located in the United Kingdom for which the
functional currency is the British Pound. The Company typically does not hedge
its foreign currency exposure. Historically, fluctuations in British Pound/US
Dollar exchange rates have not had a material effect on the Company. Future
changes in the exchange rate of the US Dollar to the British Pound may
positively or negatively impact earnings; however, due to the size of its
operations in the United Kingdom, the Company does not anticipate its exposure
to foreign currency rate fluctuations to be material in 2002.

While the Company does not currently use derivative financial instruments,
it may use them in the future if deemed appropriate.


30


ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

In this report, the consolidated financial statements and supplementary data
of the Company appear on pages F-1 through F-20 and are incorporated herein by
reference. See Index to Consolidated Financial Statements on Page 29.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND
FINANCIAL DISCLOSURE

None.

PART III

ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT.

Certain information concerning the Company's directors and executive
officers in response to Item 10 will be included in the Company's definitive
Proxy Statement for its 2002 annual meeting of shareholders and is incorporated
herein by reference. For additional information regarding executive officers of
the Company, see "Executive Officers of the Registrant" in Part I of this
report.

ITEM 11. EXECUTIVE COMPENSATION.

Information concerning executive compensation of the Company in response to
Item 11 will be included in the Company's definitive Proxy Statement for its
2002 annual meeting of shareholders and is incorporated herein by reference.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT.

Information concerning security ownership of certain beneficial owners and
management in response to Item 12 will be included in the Company's definitive
Proxy Statement for its 2002 annual meeting of shareholders and is incorporated
herein by reference.

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS.

Information concerning certain relationships and related transactions in
response to Item 13 will be included in the Company's definitive Proxy Statement
for its 2002 annual meeting of shareholders and is incorporated herein by
reference.






31


PART IV

ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES, AND REPORTS ON FORM 8-K.

(a) The following financial statements, financial statement schedules and
exhibits are filed as part of this report:

(i) Financial Statements



PAGE
------

Report of Independent Auditors F-1
Consolidated Balance Sheets F-2
Consolidated Statements of Operations for the Year Ended December 31,
2001, for the Nine Months Ended December 31, 2000 and for the Year
Ended March 31, 2000 F-3
Consolidated Statements of Shareholders' Equity for the Year Ended
December 31, 2001, for the Nine Months Ended December 31, 2000 and
for the Year Ended March 31, 2000 F-4
Consolidated Statements of Cash Flows for the Year Ended December 31,
2001, for the Nine Months Ended December 31, 2000 and for the Year
Ended March 31, 2000 F-5
Notes to Consolidated Financial Statements F-6


(ii) Financial Statement Schedules

Other financial statement schedules have not been included because they
are not required, not applicable, immaterial or the information required has
been included elsewhere.

(iii) Exhibits

The Exhibit Index on page E-1 is incorporated herein. The Company will
furnish to any eligible shareholder, upon written request, a copy of any exhibit
listed upon payment of a reasonable fee equal to the Company's expenses in
furnishing such exhibit. Such requests should be addressed to Mr. Martin Bech,
UNIFAB International, Inc., P.O. Box 11308, New Iberia, LA 70562.


(b) Reports on Form 8-K.

On March 12, 2002 we filed a Current Report on Form 8-K dated March 5, 2002.
The report included Item 5 and an exhibit and was filed to announce the signing
of the Waiver and Second Amendment to Amended and Restated Credit Agreement
dated as of March 5, 2002, among the Company, Bank One, N.A., IberiaBank,
Regions Bank and Whitney National Bank.






32



Report of Independent Auditors


The Board of Directors and Shareholders
UNIFAB International, Inc.


We have audited the accompanying consolidated balance sheets of UNIFAB
International, Inc. as December 31, 2001 and 2000 and the related consolidated
statements of operations, shareholders' equity and cash flows for the year ended
December 31, 2001, the nine-month period ended December 31, 2000, and the year
ended March 31, 2000. These financial statements are the responsibility of the
Company's management. Our responsibility is to express an opinion on these
financial statements based on our audits.

We conducted our audits in accordance with auditing standards generally accepted
in the United States. Those standards require that we plan and perform the audit
to obtain reasonable assurance about whether the financial statements are free
of material misstatement. An audit includes examining, on a test basis, evidence
supporting the amounts and disclosures in the financial statements. An audit
also includes assessing the accounting principles used and significant estimates
made by management, as well as evaluating the overall financial statement
presentation. We believe that our audits provide a reasonable basis for our
opinion.

In our opinion, the financial statements referred to above present fairly, in
all material respects, the consolidated financial position of UNIFAB
International, Inc. at December 31, 2001 and 2000, and the consolidated results
of its operations and its cash flows for the year ended December 31, 2001, the
nine-month period ended December 31, 2000, and the year ended March 31, 2000, in
conformity with accounting principles generally accepted in the United States.

The accompanying financial statements have been prepared assuming that UNIFAB
International, Inc. will continue as a going concern. As more fully described in
Note 2, the Company has incurred recurring operating losses and has a working
capital deficiency. These conditions raise substantial doubt about the Company's
ability to continue as a going concern. Management's plans in regard to these
matters are also described in Note 2. The financial statements do not include
any adjustments to reflect the possible future effects on the recoverability and
classification of assets or the amounts and classification of liabilities that
may result from the outcome of this uncertainty.



New Orleans, Louisiana
April 9, 2002






F-1


UNIFAB International, Inc.

Consolidated Balance Sheets




DECEMBER 31,
2001 2000
----------------------------
(IN THOUSANDS)

ASSETS
Current assets:
Cash and cash equivalents $ 754 $ 1,004
Accounts receivable, net 15,362 15,101
Costs and estimated earnings in excess of billings on uncompleted contracts 5,769 2,840
Income tax receivable 4,112 6,416
Prepaid expenses and other assets 2,442 3,116
----------------------------
Total current assets 28,439 28,477

Property, plant and equipment, net 34,125 34,549
Goodwill, net 260 15,496
Deferred income taxes - 606
Other assets 383 3,526
----------------------------
Total assets $ 63,207 $ 82,654
============================

LIABILITIES AND SHAREHOLDERS' EQUITY Current liabilities:
Accounts payable $ 15,123 $ 8,318
Billings in excess of costs and estimated earnings on uncompleted contracts 1,343 2,500
Accrued liabilities 4,240 3,543
Notes payable 23,246 2,303
----------------------------
Total current liabilities 43,952 16,664

Deferred income taxes - -
Noncurrent notes payable 122 18,000

Shareholders' equity:
Common stock, $0.01 par value, 20,000,000 shares authorized, 8,189,972 and
8,127,283 shares outstanding 82 81
Additional paid-in capital 46,830 46,713
Retained earnings (27,695) 1,586
Currency translation adjustment (84) (390)
----------------------------
Total shareholders' equity 19,133 47,990
----------------------------
Total liabilities and shareholders' equity $ 63,207 $ 82,654
============================


SEE ACCOMPANYING NOTES.


F-2


UNIFAB International, Inc.

Consolidated Statements of Operations



NINE-MONTHS
ENDED YEAR ENDED
YEAR ENDED DECEMBER 31, DECEMBER 31, MARCH 31,
2001 2000 2000 2000
-------------------------------------------------------------
(UNAUDITED)
(IN THOUSANDS, EXCEPT PER-SHARE AMOUNTS)


Revenue $ 81,733 $ 77,692 $ 60,385 $ 73,124
Cost of revenue 79,244 80,876 63,387 66,431
-------------------------------------------------------------
Gross profit (loss) 2,489 (3,185) (3,002) 6,693
Selling, general and administrative expense 7,417 8,704 6,685 8,160
-------------------------------------------------------------
Loss from operations (4,928) (11,888) (9,687) (1,467)

Other income (expense):
Loss on disposal of equipment and closure of facility (4,790) - - -
Impairment of goodwill (14,786) - - -
Commitment fees (700) - - -
Other expense - 38 - 38
Interest expense (2,794) (2,339) (1,807) (1,442)
Interest income 33 231 180 115
-------------------------------------------------------------
Loss before income taxes (27,965) (13,958) (11,314) (2,756)

Income tax provision (benefit) 1,316 (4,832) (4,048) (685)
-------------------------------------------------------------
Net loss $ (29,281) $ (9,126) $ (7,266) $ (2,071)
=============================================================

Basic and diluted loss per share $ (3.60) $ (1.28) $ (1.00) $ (0.31)
=============================================================
Basic and diluted weighted average
shares outstanding 8,142 7,154 7,270 6,723
=============================================================





SEE ACCOMPANYING NOTES.







F-3


UNIFAB International, Inc.

Consolidated Statements of Shareholders' Equity



ACCUMULATED
COMMON STOCK ADDITIONAL OTHER
-------------------- PAID-IN RETAINED COMPREHENSIVE
SHARES AMOUNT CAPITAL EARNINGS INCOME TOTAL
--------- -------- ------------ ---------- ---------------- -----------
(IN THOUSANDS)

Balance at March 31, 1999 6,021 $ 60 $ 28,542 $ 10,923 $ 42 $ 39,567
Stock issued:
PIM acquisition 47 - 337 - - 337
OBI acquisition 680 7 5,922 - - 5,929
CESI acquisition 60 1 488 - - 489
Stock awards and stock options
exercised 12 - 106 - - 106
Net loss - - - (2,071) - (2,071)
Currency translation adjustment - - - - (89) (89)
-----------
Comprehensive loss - - - - - (2,160)
----------------------------------------------------------------------------------
Balance at March 31, 2000 6,820 68 35,395 8,852 (47) 44,268
Stock issued:
Stock awards 6 - 36 - - 36
Private placement of stock 1,300 13 11,272 - - 11,285
Stock options exercised 1 - 10 - - 10
Net loss - - - (7,266) - (7,266)
Currency translation adjustment (343) (343)
-----------
Comprehensive loss - - - - - (7,609)
----------------------------------------------------------------------------------
Balance at December 31, 2000 8,127 81 46,713 1,586 (390) 47,990
Stock issued:
Stock awards 56 1 66 - - 67
Stock options exercised 7 - 51 - - 51
Net loss - - - (29,281) - (29,281)
Currency translation adjustment 306 306
-----------
Comprehensive loss - - - - - (28,857)
----------------------------------------------------------------------------------
Balance at December 31, 2001 8,190 $ 82 $ 46,830 $ (27,695) $ (84) $ 19,133
==================================================================================



SEE ACCOMPANYING NOTES.






F-4


UNIFAB International Inc.

Consolidated Statements of Cash Flows



YEAR ENDED NINE MONTHS
DECEMBER ENDED YEAR ENDED
31, DECEMBER 31, MARCH 31,
----------------------------------------------
2001 2000 2000
----------------------------------------------

(IN THOUSANDS)

CASH FLOWS FROM OPERATING ACTIVITIES
Net loss $ (29,281) $ (7,266) $ (2,071)
Adjustments to reconcile net loss to net cash used in operating
activities:
Depreciation 2,604 1,727 1,953
Amortization 450 631 804
Provision for doubtful accounts 33 886 266
Impairment charge on goodwill 14,786 - -
Deferred income taxes 1,316 (3,252) 1,877
Changes in operating assets and liabilities, net of effects from
acquisition of business:
Accounts receivable 169 1,807 5,187
Net costs and estimated earnings in excess of billings and
billings in excess of costs and estimated earnings on
uncompleted contracts (4,086) 3,577 (6,590)
Prepaid expenses and other assets 6,688 (2,524) (3,490)
Accounts payable and accrued liabilities 7,227 2,471 1,386
----------------------------------------------
Net cash used in operating activities (94) (1,943) (678)

CASH FLOWS FROM INVESTING ACTIVITIES
Acquisition of business, net of cash acquired - - 199
Purchases of equipment 2,293 (4,688) (7,557)
Advance under secured note receivable - -
Proceeds from sale of equipment 90 178 -
----------------------------------------------
Net cash used in investing activities (2,293) (4,510) (7,358)

CASH FLOWS FROM FINANCING ACTIVITIES
Net change in short-term borrowings 2,407 5,173 6,695
Proceeds from note payable - 10,000
Payments on notes payable (411) (9,600) (9,235)
Distribution of Sub S earnings - -
Distributions to dissenting shareholder - (360)
Exercise of stock options 51 10 -
Proceeds from issuance of common stock 11,685 -
----------------------------------------------
Net cash provided by financing activities 2,047 7,268 7,100
Net change in cash and cash equivalents (250) 815 (936)
Cash and cash equivalents at beginning of year 1,004 189 1,125
----------------------------------------------
Cash and cash equivalents at end of year $ 754 $ 1,004 $ 189
==============================================

SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION
Cash paid during the year for:
Income taxes $ - $ - $ -
==============================================
Interest $ 1,944 $ 1,944 $ 1,766
==============================================


SEE ACCOMPANYING NOTES.

F-5


UNIFAB International Inc.

Notes to Consolidated Financial Statements

December 31, 2001



1. DESCRIPTION OF BUSINESS AND SIGNIFICANT ACCOUNTING POLICIES

DESCRIPTION OF BUSINESS

UNIFAB International, Inc. (the Company) fabricates and assembles jackets,
decks, topside facilities, quarters buildings, drilling rigs and equipment for
installation and use offshore in the production, processing and storage of oil
and gas. Through a wholly-owned subsidiary, Allen Process Systems, LLC, the
Company designs and manufactures specialized process systems such as oil and gas
separation systems, gas dehydration and treatment systems, and oil dehydration
and desalting systems, and other production equipment related to the development
and production of oil and gas reserves. Compression Engineering Services, Inc.
(CESI), a division of Allen Process Systems, LLC, provides compressor project
engineering from inception through commissioning, including project studies and
performance evaluation of new and existing systems, on-site supervision of
package installation, and equipment sourcing and inspection. Through a
wholly-owned subsidiary, Oil Barges, Inc., the Company designs and fabricates
drilling rigs, including first of a kind barges using proprietary designs. The
Company's main fabrication facilities are located at the Port of Iberia in New
Iberia, Louisiana. Through a wholly-owned subsidiary, UNIFAB International West,
LLC, the Company provides repair, refurbishment and conversion services for oil
and gas drilling rigs and industrial maintenance services. Through a
wholly-owned subsidiary, Allen Process Systems, Ltd., headquartered in London,
England, the Company provides engineering and project management services
primarily in Europe and the Middle East.

The operating cycle of the Company's contracts is typically less than one
year, although some large contracts may exceed one year's duration. Assets and
liabilities have been classified as current and noncurrent under the operating
cycle concept, whereby all contract-related items are regarded as current
regardless of whether cash will be received within a 12-month period. At
December 31, 2001, it was anticipated that substantially all contracts in
progress, and receivables associated therewith, would be completed and collected
within a 12-month period.

ORGANIZATION AND INITIAL PUBLIC OFFERING

UNIFAB International, Inc. was formed on July 16, 1997 to serve as the
parent corporation of Universal Fabricators Incorporated, 51% of the outstanding
common stock of which was owned by Universal Partners, Inc. (Universal Partners)
and 49% of which was owned by McDermott Incorporated (McDermott). On September
24, 1997, immediately prior to the completion of an initial public offering of
3,237,250 shares of the Company's $.01 par value common stock (the Offering),
Universal Partners and McDermott exchanged their respective shares of common
stock of Universal Fabricators Incorporated for shares of the Company's common
stock. The shareholders of Universal Partners received 1,785,000 shares of
common stock of the Company and McDermott received 1,715,000 shares of common
stock in this share exchange. All share-related amounts have been adjusted to
reflect the effect of this exchange. In the Offering, 1,522,250 shares were sold
by the Company and the balance of the shares were sold by McDermott.

Also on September 24, 1997, Universal Fabricators Incorporated paid
$6,300,000 to McDermott for the surrender of certain contractual rights,
including the cancellation of an option held by McDermott which allowed it to
acquire the other 51% of outstanding common stock of Universal Fabricators
Incorporated.

F-6


1. DESCRIPTION OF BUSINESS AND SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

PRINCIPLES OF CONSOLIDATION

The consolidated financial statements include the accounts of the Company
and its subsidiaries, all of which are wholly owned. Significant intercompany
accounts and transactions have been eliminated in consolidation.

FISCAL YEAR

Effective December 31, 2000, the Company changed its fiscal year-end to
December 31 of each year. The consolidated statements of operations,
shareholders' equity and cash flows for the period from April 1, 2000 to
December 31, 2000 represent a transition period of nine months which is referred
to as the nine months ended December 31, 2000. The accompanying financial
statements for the year ended December 31, 2000 are unaudited. In our opinion,
all normal recurring adjustments that are necessary for a fair presentation of
the statement of operations have been reflected in the consolidated financial
statements for these periods.

REVENUE AND COST RECOGNITION

Revenue from fixed-price and modified fixed-price contracts is recognized on
the percentage-of-completion method. In the case of long-term contracts
extending over one or more fiscal years, revisions of the cost and profit
estimated during the course of the work are reflected in the accounting period
in which the facts that require revision become known. At the time a loss on a
contract becomes known, the entire amount of the ultimate loss is accrued.
Variations from estimated contract performance could result in a material
adjustment to operating results for any fiscal year. Contract bonus payments
under fixed price contracts are included in revenue when their realization is
reasonably assured. Revenue from time and material contracts and cost-plus-fee
contracts are recognized on the basis of costs incurred during the period plus
mark up or fees earned.

The Company measures progress toward completion on contracts in a manner
that we believe most accurately reflects the physical progress on the contracts.
Contracts to construct platforms are measured by comparing labor and subcontract
costs to date against total estimated labor and subcontract costs. These
contracts typically include significant material costs at the start of the
contract, such as for steel, in addition to labor and subcontract costs. The
Company does not include materials purchased pursuant to such contracts as a
measure of completion because it believes that would distort the reported
progress on the contracts.

Progress on contracts to design and to manufacture processing equipment are
measured by comparing labor hours to date against total estimated labor hours.
These contracts generally include a significant number of man-hours to design
and to manufacture the equipment, which the Company believes accurately
represents progress on the contracts. The Company does not include materials
purchased in the measure of progress because of the significance of those costs
relative to total contract costs. The Company believes that the inclusion of
materials purchased in the measure of progress on these contracts would distort
the reported progress on the contracts.

Progress on contracts to manufacture drilling rigs is measured by comparing
total costs to date against total estimated costs. These contracts generally do
require steel purchases as man-hours are applied and physical completion is
performed. The relative value of materials purchased to the value of labor costs
on these contracts does not cause a material distortion in the measure of
progress on these contracts when material costs are included in the measure of
progress.

As described above, these measures of progress are used consistently for
contracts that have similar characteristics. The Company believes that the use
of these measurements of progress results in an appropriate, objective measure
of progress on contracts.

Contract costs include direct labor, material, subcontract costs and
allocated indirect costs related to contract performance. General and
administrative costs are charged to expense as incurred.

USE OF ESTIMATES

F-7


The preparation of financial statements in conformity with accounting
principles generally accepted in the United States requires management to make
estimates and assumptions that affect the amounts reported in the financial
statements and accompanying notes. Actual results could differ from those
estimates.

CASH EQUIVALENTS

The Company considers all highly liquid investments with a maturity of three
months or less when purchased to be cash equivalents.

PROPERTY, PLANT AND EQUIPMENT

Property, plant and equipment is stated at cost. Depreciation is computed
principally by the straight-line method over the estimated lives of the assets,
which range from 19 to 31 years for building and bulkhead and 3 to 12 years for
yard and other equipment, for financial statement purposes and by accelerated
methods for income tax purposes.

Amortization of leasehold improvements is provided using the straight-line
method over the estimated useful lives of the assets or over the terms of the
lease, whichever is shorter.

GOODWILL

Goodwill is acquired in business combinations accounted for under the
purchase method of accounting and is amortized on a straight-line basis over
15-30 years for financial statement purposes and over 15 years for income tax
purposes. The lives used to amortize goodwill is based on our evaluation of the
acquisition and limitations, if any, on the source of the goodwill. At December
31, 2001 the weighted average life of goodwill is 16 years. Accumulated
amortization at December 31, 2001 and 2000 was $39,000 and $2,120,000,
respectively. The recoverability of goodwill acquired is assessed periodically
and takes into account whether the goodwill should be completely or partially
written off or the amortization period accelerated. In evaluating the value and
future benefits of goodwill, the recoverability from operating income is
measured. Under this approach, the carrying value of goodwill would be reduced
if it is probable that management's best estimate of future operating income
before amortization will be less than the carrying amount of goodwill over the
remaining amortization period. The Company assesses long-lived assets for
impairment in accordance with Financial Accounting Standards Board (FASB)
Statement No. 121, ACCOUNTING FOR IMPAIRMENT OF LONG-LIVED ASSETS AND FOR
LONG-LIVED ASSETS TO BE DISPOSED OF (SFAS 121). Under those rules, goodwill
associated with assets acquired in a purchase business combination is included
in impairment evaluations when events or circumstances exist that indicate the
carrying amounts of those assets may not be recoverable.

INTEREST CAPITALIZATION

Interest costs for the construction of certain long-lived assets are
capitalized and amortized over the related assets' estimated useful lives.
During the nine months ended December 31, 2000 and the year ended March 31,
2000, interest costs of $396,000 and $390,000, respectively, were capitalized.
No interest costs were capitalized during the year ended December 31, 2001.

INCOME TAXES

Income taxes have been provided using the liability method in accordance
with Statement of Financial Accounting Standards No. 109, ACCOUNTING FOR INCOME
TAXES.

STOCK BASED COMPENSATION

The Company grants stock options for a fixed number of shares to employees
with an exercise price equal to the fair value of the shares at the date of the
grant. The Company accounts for the stock option grants in accordance with APB
Opinion No. 25, ACCOUNTING FOR STOCK ISSUED TO EMPLOYEES, and, accordingly,
recognized no compensation expense for the stock option grants.

LONG-LIVED ASSETS

F-8


The Company periodically evaluates the carrying value of long-lived assets
to be held and used in accordance with Statement of Financial Accounting
Standards No. 121, ACCOUNTING FOR THE IMPAIRMENT OF LONG-LIVED ASSETS AND FOR
LONG-LIVED ASSETS TO BE DISPOSED OF (SFAS 121). SFAS 121 requires impairment
losses to be recorded on long-lived assets used in operations when indicators of
impairment are present and the undiscounted cash flows estimated to be generated
by those assets are less than the carrying amounts. In that event, a loss is
recognized based on the amount by which the carrying amount exceeds the fair
value of the long-lived asset. Loss on long-lived assets to be disposed of is
determined in a similar way, except that the fair values are reduced for the
cost of disposal.

EARNINGS PER SHARE

The Company calculates earnings per share in accordance with Financial
Accounting Standards Board Statement No. 128, EARNINGS PER SHARE.

FAIR VALUE OF FINANCIAL INSTRUMENTS

The carrying amount of the Company's financial instruments at December 31,
2001, primarily notes payable, closely approximates fair value.

2. GOING CONCERN ASSUMPTION AND WORKING CAPITAL DEFICIT

During 2001, the Company's results of operation and financial condition
deteriorated dramatically. In significant ways, the Company's declining
financial condition impacted its ability to compete for contracts and labor, two
important ingredients in the Company's historic profitability. Oil and gas
prices have declined recently and drilling activity has significantly declined
in the Company's primary market, the Gulf of Mexico. The Company does not expect
recovery of fabrication prices or substantial increases in fabrication projects
in the near future. At December 31, 2001, the Company has a working capital
deficit of $15,513,000. This deficit was caused by the reclassification of
$22,605,000 outstanding under the Company's Secured Senior Credit Facility (the
"Credit Agreement"), as more fully described in Note 7. The Company has entered
into a Waiver and Second Amendment to Amended and Restated Credit Agreement (the
"Amendment"), which requires a $6.0 million principal payment to reduce the
outstanding amounts under the Credit Agreement by June 30, 2002. The Company
does not currently have the ability to make this payment. If unable to make the
payment by the due date the Company would be in default under the terms of the
Amendment and the Bank Group could seek remedies under the terms of the
Amendment, including demanding payment on the entire balance outstanding under
the Credit Agreement. Management is developing plans to seek additional capital
to meet the terms of the Amendment, including equity capital, new debt financing
or liquidation of operating assets or subsidiaries. If the Company is
unsuccessful in its efforts to renegotiate or replace the Credit Agreement,
raise additional capital and to return to profitability, it may not be able to
meet its obligations in the ordinary course of business. The Company must
experience a marked improvement in 2002 in order to remain a going concern. The
financial statements do not include any adjustments to reflect the possible
future effects on the recoverability and classification of assets or the amounts
and classification of liabilities that may result from the outcome of this
uncertainty.

3. PRIVATE PLACEMENT OF COMMON STOCK

On September 29, 2000, the Company completed a private placement in which
1,300,000 shares were sold to eight accredited investors for aggregate proceeds
of $12,350,000 ($9.50 per share). Morgan Keegan & Company, Inc., for its
services as placement agent, received a commission of $617,500 and a five-year
warrant to purchase 60,000 shares of the Company's common stock at an exercise
price of $9.50 per share. The net proceeds of the private placement after the
commission to the placement agent and offering expenses totaled $11,685,150,
which was applied to reduce the indebtedness under the Secured Senior Credit
Facility.

4. CONTRACTS IN PROGRESS

Information pertaining to contracts in progress at December 31, 2001 and
2000 consisted of the following:


F-9



DECEMBER 31
2001 2000
------------------------------
(IN THOUSANDS)

Costs incurred on uncompleted contracts $ 26,912 $ 25,457
Estimated earnings (loss) 2,738 (249)
------------------------------
29,650 25,208
Less billings to date (25,224) (24,868)
------------------------------
$ 4,426 $ 340
==============================

Included in the accompanying balance sheets under
the following captions:
Costs and estimated earnings in excess of
billings on uncompleted contracts $ 5,769 $ 2,840
Billings in excess of costs and estimated
earnings on uncompleted contracts (1,343) (2,500)
------------------------------
$ 4,426 $ 340
==============================


Accounts receivable includes retainages and unbilled receivables,
respectively, of $641,000 and $2,018,000 at December 31, 2001 and $598,000 and
$791,000 at December 31, 2000.

5. PROPERTY, PLANT AND EQUIPMENT

Property, plant and equipment consisted of the following at December 31,
2001 and 2000:



DECEMBER 31
2001 2000
---------------------------
(IN THOUSANDS)


Land $ 2,587 $ 2,557
Building and bulkhead, including leasehold
improvements 18,405 17,785
Yard equipment 25,920 24,371
Vehicles and other equipment 1,977 2,251
---------------------------
48,889 46,964

Less accumulated depreciation 14,764 12,415
---------------------------
$ 34,125 $ 34,549
===========================


The Company leases land, upon which portions of its structural fabrication
and process equipment fabrication facilities in New Iberia are located, under
noncancelable operating leases. The leases expire in 2003 for the structural
fabrication facility with two 10-year renewal options and in 2009 for the
process equipment facilities with one 10-year renewal option. The Company also
leases its facility in Lake Charles under a noncancelable operating lease. The
lease expires in 2005 and has two five-year renewal options. Future minimum
payments, including option periods, under these leases are as follows (in
thousands):

F-10


2002 $ 640
2003 640
2004 640
2005 640
2006 640
2007 and after 7,599
----------
$ 10,799
==========

Rent expense, which includes rent on cancelable equipment leases, during the
year ended December 31, 2001, the nine months ended December 31, 2000 and the
year ended March 31, 2000 was $2,300,000, $1,600,000 and $1,724,000,
respectively.

6. INCOME TAXES

Deferred income taxes reflect the net effects of temporary differences
between the carrying amounts of assets and liabilities for financial reporting
purposes and the amounts used for income tax purposes. Significant components of
the Company's deferred tax liabilities and assets as of December 31, 2001 and
2000 were as follows:



DECEMBER 31
--------------------------
2001 2000
--------------------------
(IN THOUSANDS)

Deferred tax liabilities:
Excess book value over tax basis of property, plant
and equipment $ 4,650 $ 3,944
Excess book value over tax basis of drilling
equipment acquired in the acquisition of OBI - 320
Long-term construction contracts - 521
Goodwill - 42
--------------------------
Total deferred tax liabilities 4,650 4,827
Deferred tax assets:
Reserves not currently deductible 234 265
Goodwill 3,132
Operating loss carryforward 8,618 4,724
--------------------------
Total deferred tax assets 11,984 4,989
Valuation allowance for deferred tax assets (7,334) (392)
--------------------------
Deferred tax assets 4,650 4,597
--------------------------
Net deferred tax liabilities $ - $ 230
==========================


A valuation allowance has been recognized to offset the deferred tax asset
related to the operating loss carryforwards which exceeds net deferred tax
liabilities.






F-11


The income tax provision (benefit) is comprised of the following:



NINE MONTHS
YEAR ENDED ENDED YEAR ENDED
DECEMBER 31 DECEMBER 31 MARCH 31
2001 2000 2000
--------------------------------------------------------
(IN THOUSANDS)


Current $ - $ (796) $ (2,562)
Deferred 1,316 (3,252) 1,877
--------------------------------------------------------
$ 1,316 $ (4,048) $ (685)
========================================================


The reconciliation of income tax computed at the federal statutory rates to
income tax expense is:



YEAR ENDED NINE MONTHS ENDED YEAR ENDED
DECEMBER 31 DECEMBER 31 MARCH 31
2000 2000 1999
----------------------------------------------------------
(IN THOUSANDS)


Tax at federal statutory rates $ (9,508) $ (3,846) $ (937)
Valuation reserve on deferred tax assets 6,942 134 258
Non deductible loss on goodwill impairment 3,174 - -
Other, primarily state income taxes 708 (336) (6)
----------------------------------------------------------
$ 1,316 $ (4,048) $ (685)
==========================================================


7. CREDIT ARRANGEMENT

On November 30, 1999, the Company entered into a Secured Senior Credit
Facility with a syndicated group of financial institutions (the "Bank Group")
for $40 million in total credit facilities (the "Secured Senior Credit
Facility"). Under the original terms of the facility, the Company could borrow
up to $30.0 million for general corporate purposes under a revolving credit
facility, of which up to $17.5 million was available for standby letters of
credit. Additionally, the Secured Senior Credit Facility originally provided for
a $10.0 million term loan with monthly principal payments of $167,000, plus
interest. On September 29, 2000, $8.5 million, the entire amount then
outstanding under the term loan, was paid.

AMENDED AND RESTATED CREDIT AGREEMENT. On March 5, 2002, the Company entered
into a Waiver and Second Amendment to Amended and Restated Credit Agreement (the
"Amendment"). The Senior Secured Credit Agreement was originally entered into on
November 30, 1999, and was amended and restated October 19, 2000 with the same
syndicate of commercial banks led by Bank One, Louisiana, N.A., as agent (the
"Credit Agreement"). At December 31, 2001, the Company had $ 23.8 million
outstanding under the Credit Agreement, of which $1.2 million is for letters of
credit. During 2001, the Company increased the outstanding balance under the
Credit Agreement from $22.2 million to $23.8 million. The Credit Agreement is
secured by substantially all of the assets of the Company and provides
borrowings subject to certain borrowing base limitations based on 50% of the
appraised value of fixed assets (approximately $14.2 million at December 31,
2001) plus 80% of eligible accounts receivable (approximately $5.7 million at
December 31, 2001). At December 31, 2001, borrowings under the Credit Agreement
exceeded the borrowing base limit by $3.0 million. The Credit Agreement requires
the Company to make monthly interest payments, currently approximately $165,000
per month. Throughout 2001, the Company was out of compliance with the financial
covenants and certain other requirements of the Credit Agreement and as a result
paid interest at a rate that included a maximum variable interest margin. The
variable fee range for issued letters of credit is 1.25% to 2.75% per annum on
the principal amount of letters of credit issued for performance or payment, or
2% to 4% per annum on the principal amount if the letter of credit is a
financial letter of credit. The unused commitment fee range is 1/4% to 1% per
annum. The letter of credit fees and unused commitment fees are variable based
on the funded indebtedness to EBITDA ratio as defined in the Credit Agreement.

F-12


The Company was not in compliance with the terms of the Credit Agreement as
of December 31, 2001, as follows: tangible net worth was not sufficient to meet
the ratio to funded indebtedness required by one of the financial covenants;
adjusted earnings before taxes, depreciation and amortization for the year ended
December 31, 2001 were not sufficient to meet the ratio to funded indebtedness;
adjusted earnings before taxes, depreciation and amortization for the year ended
December 31, 2001 were not sufficient to meet the ratio to fixed charges; the
current ratio was not sufficient to meet the minimum current ratio; and the net
loss before taxes for the quarter ended December 31, 2001 did not meet the
required minimum net income. At the request of the Company, the Bank Group
executed the Amendment on March 5, 2002, which waived the defaults of these
financial covenants for the period ended December 31, 2001. Under the terms of
the Amendment, all new advances as well as all existing advances bear interest
at the prime lending rate plus 3% (7.5% at March 31, 2002). The maturity of the
Credit Agreement has been extended to January 31, 2003. If the Company has not
replaced the Credit Agreement by January 31, 2003, or if the maturity date is
accelerated due to non performance under the terms of the Amendment, the Company
will be required to pay $450,000 to the Bank Group. The Amendment requires the
Company to make scheduled reductions totaling $8.0 million, $1.9 million of
which was paid concurrent with the execution of the Amendment on March 5, 2002,
and the remaining $6.1 million is due on June 30, 2002. In the event the Company
is unable to make the $6.0 million payment by June 30, 2002, the Company will be
required to pay up to $825,000 to the Bank Group. The Amendment allows the
Company to exceed the borrowing base limit up to $3.5 million until June 30,
2002, and limits the Company to the borrowing base limit beginning June 30,
2002. The Amendment requires the Company to diligently market for sale the
Company's deep water facility in Lake Charles, Louisiana. The Amendment revises
the financial covenants related to operating results to be consistent with the
Company's expected operating results. However, because the Amendment requires
substantial repayments by June 30, 2002, and the Company currently does not have
the resources to make such payments, there is a substantial risk that the
Company will be unable to maintain compliance with its obligations to its Bank
Group. The Amendment provides for additional borrowings under certain
conditions, mainly through the sale of assets or subsidiaries. The Company hopes
to replace the Credit Agreement with debt or equity financing before the
maturity date of January 31, 2003.

8. EARNINGS PER SHARE

The following table sets forth the computation of basic and diluted earnings
per share (in thousands, except per share data):


NINE MONTHS YEAR
YEAR ENDED ENDED ENDED
DECEMBER 31 DECEMBER 31 MARCH 31
2001 2000 2000
---------------------------------------------

Numerator for basic and diluted loss per share $ (29,281) $ (7,266) $ (2,071)
=============================================

Denominator:
Denominator for basic loss per share - weighted
average shares 8,142 7,270 6,723
Effect of dilutive employee stock options - - -
---------------------------------------------
Denominator for diluted loss per share -
adjusted weighted average shares 8,142 7,270 6,723
=============================================

Basic loss per share $ (3.60) $ (1.00) $ (0.31)
=============================================
Diluted loss per share $ (3.60) $ (1.00) $ (0.31)
=============================================


Options with an exercise price greater than the average market price of the
Company's common stock for the year and options outstanding during years where
the Company incurs a net loss are anti-dilutive and, therefore, not included in
the computation of diluted earnings per share. During the year ended December
31, 2001, 862,000 options and 60,000 warrants outstanding were anti-dilutive due
to the net loss incurred by the Company. During the nine months ended December
31, 2000, 839,000 options and 60,000 warrants outstanding were anti-dilutive due
to the net loss incurred by the Company. During the year ended March 31, 2000,
412,000 options outstanding were anti-dilutive due to the net loss incurred by
the Company.


F-13


9. CONCENTRATION OF CREDIT RISK

The Company's customers are principally major and large independent oil and
gas companies and drilling companies. These concentrations of customers may
impact our overall exposure to credit risk, either positively or negatively, in
that our customers may be similarly affected by changes in economic or other
conditions. Management believes that the allowance for doubtful accounts is
adequate to absorb probable credit losses. Receivables are generally not
collateralized.

At December 31, 2001 and 2000, the allowance for doubtful accounts deducted
from accounts receivable on the accompanying balance sheets was $528,000 and
$958,000, respectively.

10. LONG-TERM INCENTIVE PLANS

The Company has elected to follow Accounting Principles Board Opinion No.
25, ACCOUNTING FOR STOCK ISSUED TO EMPLOYEES, ("APB 25") and related
interpretations in accounting for its employee stock options because, as
discussed below, the alternative fair value accounting provided under FASB
Statement No. 123, ACCOUNTING FOR STOCK-BASED COMPENSATION, ("Statement No.
123") requires use of option valuation models that were not developed for use in
valuing employee stock options. Under APB 25, no compensation expense is
recognized because the exercise price of the Company's employee stock options
equals the market price of the underlying stock on the date of grant.

In July 1997, the Company adopted and its shareholders approved the
Long-Term Incentive Plan (the "1997 Plan") to provide long-term incentives to
its key employees, including officers and directors who are employees of the
Company (the "Eligible Employees"). Under the 1997 Plan, which is administered
by the Compensation Committee of the Board of Directors, the Company may grant
incentive stock options, nonqualified stock options, restricted stock, other
stock-based awards or any combination thereof (the "Incentives") to Eligible
Employees. The Compensation Committee determines who receives Incentives and
establishes the exercise price of any stock options granted under the Incentive
Plan, provided that the exercise price may not be less than the fair market
value of the Common Stock on the date of grant. A maximum total of 460,000
shares of Common Stock are available for issuance under the 1997 Plan.

In June 2000, the Company adopted and the Board of Directors approved the
Employee Long-Term Incentive Plan (the "2000 Plan") to provide long-term
incentives to its key employees who are not officers or directors of the
Company. Under the 2000 Plan, which is administered by the Plan Administrator,
the Company may grant incentive stock options, nonqualified stock options,
restricted stock, other stock-based awards or any combination thereof to key
employees. The Compensation Committee reviews and approves awards made under the
2000 plan and approves the exercise price of any stock options granted under the
2000 Plan. The exercise price may not be less than the fair market value of the
Common Stock on the date of grant. A maximum total of 565,000 shares of Common
Stock are available for issuance under the 2000 Plan.

All of the options granted under the long-term incentive plans have a
10-year term and vest over a 2-year period. The optionee will not realize any
income for federal income tax purposes, nor will the Company be entitled to any
deduction, upon the grant of a nonqualified stock option. Upon exercise, the
optionee will realize ordinary income measured by the difference between the
aggregate fair market value of the shares of Common Stock on the exercise date
and the aggregate exercise price, and the Company will be entitled to a
deduction in the same amount.

Pro forma information regarding net income and earnings per share is
required by Statement 123 and has been determined as if the Company had
accounted for its employee stock options under the fair value method of that
statement. The fair value for these options was estimated at the date of the
grant using the Black-Scholes option pricing model with the following weighted
average assumptions:

F-14




NINE MONTHS
YEAR ENDED ENDED YEAR ENDED
DECEMBER 31 DECEMBER 31 MARCH 31
2001 2000 2000
------------------ ------------------- -------------------

Risk-free interest rate 2.77% to 6.28% 4.69% to 6.28% 5.67% to 6.23%
Volatility factor of the expected market
price of UNIFAB stock .722-.907 .722-.797 .722 to .797
Weighted average expected life of the option 2 years 2 years 2 years

Expected dividend yield Zero Zero Zero


The Black-Scholes valuation model was developed for use in estimating the
fair value of traded options, which have no vesting restrictions and are fully
transferable. In addition, option valuation models require the input of
subjective assumptions including the expected stock price volatility. Because
the Company's employee stock options have characteristics significantly
different from those of traded options, and because changes in the subjective
input assumptions can materially affect the fair value estimated, in
management's opinion the existing models do not necessarily provide a reliable
single measure of the fair value of its employee stock options.
















F-15



The Company's pro forma information for the year ended December 31, 2001,
for the nine months ended December 31, 2000 and the year ended March 31, 2000 is
as follows (in thousands, except per share data):



NINE MONTHS YEAR
YEAR ENDED ENDED ENDED
DECEMBER 31 DECEMBER 31 MARCH 31
2001 2000 2000
---------------- --------------- ------------

Net loss:
As reported $ (29,281) $ (7,266) $ (2,071)
Pro forma including the effect of options $ (29,867) $ (7,812) $ (2,407)
Basic loss per share:
As reported $ (3.60) $ (1.00) $ (0.31)
Pro forma including the effect of options $ (3.67) $ (1.07) $ (0.36)
Diluted loss per share:
As reported $ (3.60) $ (1.00) $ (0.31)
Pro forma including the effect of options $ (3.67) $ (1.07) $ (0.36)


A summary of the Company's stock options activity and the related
information for the year ended December 31, 2001, for the nine months ended
December 31, 2000 and for the year ended March 31, 2000 is as follows (in
thousands, except per share data):



Year Ended Nine Months Ended
December 31, December 31, Year Ended March
2001 2000 31, 2000
------------------------- ------------------------ ------------------------
WEIGHTED WEIGHTED WEIGHTED
AVERAGE AVERAGE AVERAGE
EXERCISE EXERCISE EXERCISE
PRICE OPTIONS PRICE OPTIONS PRICE OPTIONS
---------------------------------------------------------------------------


Outstanding - beginning of period $ 8.62 842 $ 10.08 412 $ 10.21 395
Granted 1.78 198 7.22 434 7.18 20
Exercised 7.37 (7) 7.50 (1) - -
Forfeited 7.87 (171) 7.33 (3) 7.50 (3)
--------------------------------------------------------------- -----------
Options outstanding at end of period $ 7.21 862 $ 8.62 842 $ 10.08 412
=============================================================== ===========
Options exercisable at end of period $ 8.36 623 $ 9.42 552 $ 10.99 306
=============================================================== ===========
Weighted average fair value of options
granted during period $ 0.82 $ 3.16 $ 3.12
============= ============= ============


Exercise prices for options outstanding as of December 31, 2001 ranged from
$1.11 to $18.00. The weighted average remaining contractual life of those
options is 8.1 years.

11. EMPLOYEE BENEFIT PLAN

The Company sponsors incentive savings plans covering substantially all of
the employees of the Company and its subsidiaries which allow participants to
make contributions by salary reduction pursuant to Section 401(k) of the
Internal Revenue Code. Under these plans, employees with one year of service
with the Company are eligible to participate.

In November 2001, the Company suspended its policy of matching employee
contributions. Prior to that date, the Company contributed an amount equal to
50% of employee contributions up to 3% of their base compensation. Matching
contributions made by the Company were approximately $334,000, $331,000 and
$311,000 in the year ended December 31, 2001, the nine months ended December 31,
2000 and in the fiscal year ended March 31, 2000, respectively.

F-16


12. MAJOR CUSTOMERS

The Company is not dependent on any one customer, and the contract revenue
earned from each customer varies from year to year based on the contracts
awarded. Contract revenue earned comprising 10% or more of the Company's total
contract revenue earned for the year ended December 31, 2001, the nine months
ended December 31, 2000 and for the fiscal year ended March 31, 2000 is
summarized as follows (in thousands):

NINE MONTHS YEAR
YEAR ENDED ENDED ENDED
DECEMBER 31 DECEMBER 31 MARCH 31
2001 2000 2000
-----------------------------------------------

Customer A $ 15,858 $ 6,617 $ 8,425
Customer B - 6,435 -
Customer C - - 10,440

13. INTERNATIONAL SALES

The Company fabricates structures and equipment for use worldwide by U.S.
customers operating abroad and by foreign customers. During the year ended
December 31, 2001, the nine months ended December 31, 2000 and the fiscal year
ended March 31, 2000, 21%, 22% and 62%, respectively, of the Company's revenue
was derived from projects fabricated for installation in international areas,
with the remainder designed for installation in the U.S. Gulf of Mexico. The
following table summarizes the Company's revenue by location for the year ended
December 31, 2001, the nine months ended December 31, 2000 and for the fiscal
years ended March 31, 2000 (in thousands):



NINE MONTHS
YEAR ENDED ENDED YEAR ENDED
DECEMBER 31 DECEMBER 31 MARCH 31
2000 2000 2000
--------------------------------------------------

Location:
U.S. Gulf of Mexico $ 64,235 $ 47,205 $ 28,109
International:
Europe 508 4,143 -
Africa 5,767 1,023 22,417
Caribbean Sea - - 10,527
Central America 696 - 7,226
South America 981 - -
Other 9,546 8,443 4,845
--------------------------------------------------
Total International 17,498 13,609 45,015
--------------------------------------------------
Total $ 81,733 $ 60,814 $ 73,124
==================================================


14. IMPAIRMENT OF LONG-LIVED ASSETS AND GOODWILL

Goodwill is acquired in business combinations accounted for under the
purchase method of accounting and is amortized on a straight-line basis over
15-30 years for financial statement purposes. The lives used to amortize
goodwill is based on Management's evaluation of the acquisition and limitations,
if any, on the source of the goodwill. In the September 2001 quarter, the
Company recorded a charge of $14.8 million recognizing the impairment of
substantially all of the goodwill on the acquisitions of OBI, Unifab
International West and Allen Process Systems Limited. Due to the economic
conditions in the oil and gas services industry, the delay in the expected
recovery to profitable operations and the decision to close the Company's barge
repair facility in New Iberia, the Company evaluated the likelihood that
goodwill would be recovered. Based on this evaluation, the Company determined
that goodwill was impaired and recorded an impairment charge of $14.8 million.
The Company's evaluation of the recovery of goodwill was based on estimated
future cash flows related to the associated businesses. The write down was to
fair value of the related businesses based on discounted cash flows or the
estimated fair value of certain facilities.

F-17


15. COMMITMENTS AND CONTINGENCIES

The Company is party to legal proceedings arising in the normal course of
business. It is the opinion of management that, except as set forth below, the
outcome of these matters will not have a material adverse effect on the
Company's financial position or results of operations, individually or in the
aggregate.

A number of the Company's vendors have sued the Company to collect amounts
of money allegedly due to them. These vendors are, in each case, unsecured
creditors of the Company. If these lawsuits collectively are prosecuted to
conclusion and the Company is unable to pay any judgments rendered against it,
the Company will be in default of the Credit Agreement. Substantially all of the
Company's assets secure its obligations under the Credit Agreement.

16. QUARTERLY OPERATING RESULTS (UNAUDITED)

A summary of quarterly results of operations for the year ended December 31,
2001 and for the nine months ended December 31, 2000 were as follows (in
thousands, except per share data):



MARCH 31, JUNE 30, SEPTEMBER 30, DECEMBER 31,
2001 2001 2001 2001
-----------------------------------------------------------------


Revenue $ 21,703 $ 22,861 $19,957 $ 17,212
Gross profit (loss) 128 1,735 1,560 (934)
Net loss (1,603) (591) (23,034) (4,053)
Basic and diluted loss per share (0.20) (0.07) (2.83) (0.50)



JUNE 30, SEPTEMBER 30, DECEMBER 31,
2000 2000 2000
-------------------------------------------------


Revenue $ 20,232 $22,673 $17,480
Gross profit (loss) 2,012 227 (5,241)
Net loss (236) (1,873) (5,157)
Basic and diluted loss per share
(0.03) (0.27) (0.63)


Pretax results for the quarter ended December 31, 2001 include:
o Loss on the completion of the OBI contracts in progress of
$2,039,000
o Recovery of $1,680,000 on an account receivable which had been
written off in the September 2001 quarter
Pretax results for the quarter ended September 30, 2001 include:
o The recognition of impairment losses on goodwill recorded in
the acquisitions of PIM, Allen Process Systems, Ltd. and OBI
totaling $14,786,000
o An increase to the provision for uncollectible accounts of
$1,643,000
o Losses on the disposal of equipment and closure of the OBI
facility, and on estimated contract losses related to OBI
contracts in progress of $2,834,000
Pretax results for the quarter ended March 31, 2001 include:
o Losses for contract cost estimates in excess of estimated
revenue of $1,100,000 Pretax results for the quarter ended
December 31, 2000 include:
o Losses for contract cost estimates in excess of estimated
revenue of $4,000,000 o Loss on the write off of a disputed
contract billing of $490,000
o An increase to the provision for uncollectible accounts of
$435,000
Pretax results for the quarter ended September 30, 2000 include:
o Losses for contract cost estimates in excess of estimated
revenue of $479,000
o A provision of $235,000 to reserve a receivable from a
customer in Chapter 7 bankruptcy

F-18



















F-19


SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, the Registrant has duly caused this report to be signed on
its behalf by the undersigned, thereunto duly authorized, on April 15, 2002.




UNIFAB International, Inc.
(Registrant)

By: /s/ Jerome E. Chojnacki
--------------------------------------------
Jerome E. Chojnacki
President and Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this
report has been signed below by the following persons on behalf of the
registrant and in the capacities and on the dates indicated.



SIGNATURE AND DATE TITLE
------------------ -----


/s/ Jerome E. Chojnacki April 15, 2002 Chairman of the Board, President and
- ----------------------------------------------------- Chief Executive Officer (Principal Executive
Jerome E. Chojnacki Officer)

/s/ Peter J. Roman April 15, 2002 Vice President and Chief Financial Officer
- ----------------------------------------------------- (Principal Financial and Accounting Officer)
Peter J. Roman

/s/ Dailey J. Berard April 15, 2002 Director
- -----------------------------------------------------
Dailey J. Berard

/s/ Charles E. Broussard April 15, 2002 Director
- -----------------------------------------------------
Charles E. Broussard

/s/ Perry Segura April 15, 2002 Director
- -----------------------------------------------------
Perry Segura

/s/ George C. Yax April 15, 2002 Director
- -----------------------------------------------------
George C. Yax






S-1



UNIFAB INTERNATIONAL, INC.

EXHIBIT INDEX

Exhibit
Number Description of Exhibits
- ------ -----------------------
3.1 Articles of Incorporation of the Company *

3.2 By-laws of the Company *

4.1 See Exhibits 3.1 and 3.2 for provisions of the Company's Articles of
Incorporation and By-laws defining the rights of holders of Common
Stock *

4.2 Specimen Common Stock Certificate *

10.1 Form of Indemnity Agreement by and between the Company and each of its
directors and executive officers *

10.2 The Company's Long-Term Incentive Plan * (Function)

10.3 Form of Stock Option Agreement under the Company's Long-Term Incentive
Plan * (Function)

10.4 Form of Employment Agreement between the Company and Dailey J.
Berard *(Function)

10.5 Form of Consulting Agreement between the Company and Varix, Ltd.,
incorporated herein by reference to Exhibit 10 of the Company's
Quarterly Report on Form 10-Q for the quarter ended September 30,
2001.f
10.6 Ground Lease Agreement dated as of September 1, 1998, between PIM,
L.L.C. (now UNIFAB International West, L.L.C. and a subsidiary of the
Company) and the Lake Charles Harbor & Terminal District **

10.7 Guaranty Agreement made as of September 1, 1998, by the Company in
favor of the Lake Charles Harbor & Terminal District **

10.8 Development Agreement among PIM, L.L.C., the Company, the Lake Charles
Harbor & Terminal District, and the Calcasieu Parish Police Jury **

10.9 Amended and Restated Credit Agreement dated as of October 19, 2000,
among the Company, Bank One, Louisiana, N.A., IberiaBank, Regions Bank
and Whitney National Bank**
10.10 Waiver and Second Amendment to Amended and Restated Credit Agreement
dated as of March 5, 2002, among the Company, Bank One, N.A.,
IberiaBank, Regions Bank and Whitney National Bank, incorporated
herein by reference to the Company's Current Report on Form 8-K dated
March 5, 2002 and filed with the Securities and Exchange Commission on
March 12, 2002
21.1 Subsidiaries of the Company

23.1 Consent of Ernst & Young LLP

----------------------------

* Incorporated herein by reference to the Company's Registration
Statement on Form S-1 filed with the Securities and Exchange
Commission on September 18, 1997, as amended (Registration
No. 333-31609).

** Incorporated herein by reference to the Company's Registration
Statement on Form S-3 filed with the Securities and Exchange
Commission on October 26, 2000, as amended (Registration
No. 333-48710).

F Management Contract or Compensatory Plan.



E-1