Back to GetFilings.com



 

U.S. SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

ý  QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934.

 

For the quarterly period ended March 31, 2004
 

o  TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from                to                .

 

Commission File Number 0-21221

 

MICROVISION, INC.

 (Exact Name of Registrant as Specified in Its Charter)

 

Delaware

 

91-1600822

(State or Other Jurisdiction of Incorporation
or organization)

 

(I.R.S. Employer Identification No.)

 

 

 

19910 North Creek Parkway, Bothell, Washington

 

98011-3008

(Address of Principal Executive Offices)

 

(Zip Code)

 

 

 

(425) 415-6847

(Registrant’s telephone number, including area code)

 


 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ý Yes   o No

 

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). ý Yes   o No

 

As of April 30, 2004, 21,497,000 shares of the Company’s common stock, $0.001 par value, were outstanding.

 

 



 

PART I

 

FINANCIAL INFORMATION

 

 

 

 

 

Item 1 - Financial Statements (unaudited)

 

 

 

 

Consolidated Balance Sheets as of March 31, 2004 and December 31, 2003

 

 

 

 

 

Consolidated Statements of Operations for the three months ended March 31, 2004 and 2003

 

 

 

 

 

Consolidated Statements of Comprehensive Loss for the three months ended March 31, 2004 and 2003

 

 

 

 

 

Consolidated Statements of Cash Flows for the three months ended March 31, 2004 and 2003

 

 

 

 

 

Notes to Consolidated Financial Statements

 

 

 

Item 2 - Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

 

 

Item 3 - Quantitative and Qualitative Disclosures About Market Risk

 

 

 

Item 4 - Controls and Procedures

 

 

 

PART II

 

OTHER INFORMATION

 

 

 

Item 6 - Exhibits and Reports on Form 8-K

 

 

2



 

Microvision, Inc.

 

Consolidated Balance Sheet

(In thousands, except per share data)

(Unaudited)

 

 

 

March 31,
2004

 

December 31,
2003

 

Assets

 

 

 

 

 

Current Assets

 

 

 

 

 

Cash and cash equivalents

 

$

5,716

 

$

10,700

 

Investment securities, available-for-sale

 

9,074

 

11,078

 

Accounts receivable, net of allowances of $109 and $109

 

1,377

 

1,896

 

Costs and estimated earnings in excess of billings on uncompleted contracts

 

890

 

664

 

Inventory

 

1,569

 

331

 

Other current assets

 

1,512

 

1,684

 

Total current assets

 

20,138

 

26,353

 

 

 

 

 

 

 

Property and equipment, net

 

5,484

 

5,958

 

Restricted investments

 

1,269

 

1,269

 

Other assets

 

303

 

338

 

Total assets

 

$

27,194

 

$

33,918

 

 

 

 

 

 

 

Liabilities, Minority Interests and Shareholders’ Equity

 

 

 

 

 

Current Liabilities

 

 

 

 

 

Accounts payable

 

$

2,304

 

$

1,223

 

Accrued liabilities

 

4,625

 

5,164

 

Current portion of research liability

 

130

 

 

Billings in excess of costs and estimated earnings on uncompleted contracts

 

50

 

53

 

Current portion of capital lease obligations

 

54

 

62

 

Current portion of long-term debt

 

72

 

70

 

Total current liabilities

 

7,235

 

6,572

 

 

 

 

 

 

 

Research liability, net of current portion

 

2,000

 

1,948

 

Capital lease obligations, net of current portion

 

23

 

34

 

Long-term debt, net of current portion

 

80

 

99

 

Deferred rent, net of current portion

 

85

 

107

 

Other long-term liabilities

 

96

 

16

 

Total liabilities

 

9,519

 

8,776

 

 

 

 

 

 

 

Commitments and Contingencies

 

 

 

 

 

 

 

 

 

Minority Interests

 

582

 

1,847

 

 

 

 

 

 

 

Shareholders’ Equity

 

 

 

 

 

Common stock, par value $.001; 73,000 shares authorized; 21,486 and 21,449 shares issued and outstanding

 

21

 

21

 

Paid-in capital

 

180,739

 

180,354

 

Preferred stock, par value $.001; 25,000 shares authorized; 0 shares issued and outstanding

 

 

 

Deferred compensation

 

(729

)

(846

)

Subscriptions receivable from related parties

 

(166

)

(166

)

Receivables from related parties, net

 

(1,823

)

(1,823

)

Accumulated other comprehensive income

 

11

 

25

 

Accumulated deficit

 

(160,960

)

(154,270

)

Total shareholders’ equity

 

17,093

 

23,295

 

Total liabilities, minority interests and shareholders’ equity

 

$

27,194

 

$

33,918

 

 

The accompanying notes are an integral part of these financial statements.

 

3



 

Microvision, Inc.

 

Consolidated Statement of Operations

(In thousands, except earnings per share data)

(Unaudited)

 

 

 

Three months ended March 31,

 

 

 

2004

 

2003

 

 

 

 

 

 

 

Contract revenue

 

$

2,299

 

$

3,402

 

Product revenue

 

675

 

135

 

Total revenue

 

2,974

 

3,537

 

 

 

 

 

 

 

Cost of contract revenue

 

1,205

 

1,304

 

Cost of product revenue

 

665

 

105

 

Total cost of revenue

 

1,870

 

1,409

 

 

 

 

 

 

 

Gross margin

 

1,104

 

2,128

 

 

 

 

 

 

 

Research and development expense (exclusive of non-cash compensation expense of $285 and $252 for the three months ended March 31, 2004 and 2003, respectively)

 

4,619

 

6,800

 

 

 

 

 

 

 

Marketing, general and administrative expense (exclusive of non-cash compensation expense of $398 and $213 for the three months ended March 31, 2004 and 2003, respectively)

 

4,573

 

4,285

 

 

 

 

 

 

 

Non-cash compensation expense

 

683

 

465

 

Total operating expenses

 

9,875

 

11,550

 

 

 

 

 

 

 

Loss from operations

 

(8,771

)

(9,422

)

 

 

 

 

 

 

Interest income

 

102

 

123

 

Interest expense

 

(8

)

(14

)

Realized gain on sale of investment securities

 

 

27

 

 

 

 

 

 

 

Loss before minority interests

 

(8,677

)

(9,286

)

 

 

 

 

 

 

Minority interests in loss of consolidated subsidiary

 

1,987

 

1,890

 

 

 

 

 

 

 

Net loss

 

$

(6,690

)

$

(7,396

)

 

 

 

 

 

 

Net loss per share - basic and diluted

 

$

(0.31

)

$

(0.46

)

 

 

 

 

 

 

Weighted-average shares outstanding - basic and diluted

 

21,459

 

15,948

 

 

The accompanying notes are an integral part of these financial statements.

 

4



 

Microvision, Inc.

 

Consolidated Statement of Comprehensive Loss

(In thousands)

(Unaudited)

 

 

 

Three months ended March 31,

 

 

 

2004

 

2003

 

 

 

 

 

 

 

Net loss

 

$

(6,690

)

$

(7,396

)

 

 

 

 

 

 

Other comprehensive income (loss) -
Unrealized gain (loss) on investment securities, available-for-sale:

 

 

 

 

 

 

 

 

 

 

 

Unrealized holding gains (losses) arising during period

 

(14

)

(14

)

 

 

 

 

 

 

Less: reclassification adjustment for gains realized in net loss

 

 

(27

)

 

 

 

 

 

 

Net unrealized gain (loss)

 

(14

)

(41

)

 

 

 

 

 

 

Comprehensive loss

 

$

(6,704

)

$

(7,437

)

 

The accompanying notes are an integral part of these financial statements.

 

5



 

Microvision, Inc.

 

Consolidated Statement of Cash Flows

(In thousands)

(Unaudited)

 

 

 

Three months ended March 31,

 

 

 

2004

 

2003

 

 

 

 

 

 

 

Cash flows from operating activities

 

 

 

 

 

Net loss

 

$

(6,690

)

$

(7,396

)

Adjustments to reconcile net loss to net cash used in operations:

 

 

 

 

 

Depreciation

 

683

 

809

 

Non-cash expenses related to issuance of stock, warrants, options and amortization of deferred compensation

 

683

 

465

 

Allowance for receivables from related parties

 

 

200

 

Realized gain on sale of investment securities

 

 

(27

)

Minority interests in loss of consolidated subsidiary

 

(1,987

)

(1,890

)

Non-cash deferred rent

 

(22

)

(22

)

Change in:

 

 

 

 

 

Accounts receivable

 

519

 

(698

)

Costs and estimated earnings in excess of billings on uncompleted contracts

 

(226

)

118

 

Inventory

 

(1,238

)

503

 

Other current assets

 

13

 

122

 

Other assets

 

35

 

(14

)

Accounts payable

 

1,084

 

(53

)

Accrued liabilities

 

(501

)

702

 

Billings in excess of costs and estimated earnings on uncompleted contracts

 

(3

)

(46

)

Research liability, current and long-term

 

182

 

452

 

Net cash used in operating activities

 

(7,468

)

(6,775

)

 

 

 

 

 

 

Cash flows from investing activities

 

 

 

 

 

Sales of investment securities

 

3,052

 

2,285

 

Purchases of investment securities

 

(1,062

)

(32

)

Sales of restricted investment securities

 

216

 

275

 

Purchases of restricted investment securities

 

(216

(216

)

Purchases of property and equipment

 

(212

)

(338

)

Net cash provided by investing activities

 

1,778

 

1,974

 

 

 

 

 

 

 

Cash flows from financing activities

 

 

 

 

 

Principal payments under capital leases

 

(19

)

(26

)

Principal payments under long-term debt

 

(17

)

(15

)

Net proceeds from issuance of common stock

 

242

 

11,881

 

Net proceeds from sale of subsidiary’s equity to minority interests

 

500

 

 

Net cash provided by financing activities

 

706

 

11,840

 

 

 

 

 

 

 

Net increase (decrease) in cash and cash equivalents

 

(4,984

)

7,039

 

Cash and cash equivalents at beginning of period

 

10,700

 

9,872

 

 

 

 

 

 

 

Cash and cash equivalents at end of period

 

$

5,716

 

$

16,911

 

 

6



 

 

 

Three months ended March 31,

 

 

 

2004

 

2003

 

 

 

 

 

 

 

Supplemental disclosure of cash flow information

 

 

 

 

 

 

 

 

 

 

 

Cash paid for interest

 

$

8

 

$

14

 

 

 

 

 

 

 

Supplemental schedule of non-cash investing and financing activities

 

 

 

 

 

 

 

 

 

 

 

Other non-cash additions to property and equipment

 

$

26

 

$

49

 

 

The accompanying notes are an integral part of these financial statements.

 

7



 

MICROVISION, INC.

Notes to Consolidated Financial Statements

March 31, 2004

 

Management’s Statement

 

The Consolidated Balance Sheet as of March 31, 2004, the Consolidated Statements of Operations, Comprehensive Loss and Cash Flows for the three months ended March 31, 2004 and March 31, 2003, have been prepared by Microvision, Inc. and have not been audited.  In the opinion of management, all adjustments necessary to present fairly the financial position at March 31, 2004 and the results of operations and cash flows for all periods presented have been made and consist of normal recurring adjustments. Certain information and footnote disclosures normally included in financial statements prepared in accordance with generally accepted accounting principles have been condensed or omitted pursuant to the rules of the SEC.  You should read these condensed financial statements in conjunction with the financial statements and notes thereto included in Microvision, Inc.’s Annual Report on Form 10-K for the fiscal year ended December 31, 2003.  The results of operations for the three months ended March 31, 2004 are not necessarily indicative of the operating results that may be attained for the entire fiscal year.

 

Principles of Consolidation

 

The consolidated financial statements include the accounts of Microvision, Inc. (“Microvision”); a Delaware corporation, and its subsidiary Lumera Corporation (“Lumera”), a Washington corporation, (collectively the “Company”).  As of March 31, 2004, Microvision owned 76% of the common stock, 11% of the Series A and 27% of the Series B convertible preferred stock.  As of December 31, 2003, Microvision owned 76% of the common stock, 11% of the Series A and 32% of the Series B convertible preferred stock.  The balance of Lumera’s outstanding capital stock is owned by its directors, Microvision employees, the University of Washington and other investors unaffiliated with the Company.  Lumera’s losses were first allocated to its common shareholders until such losses exceeded its common equity and then to its preferred shareholders pro rata in accordance with their respective liquidation values.  All material intercompany accounts and transactions have been eliminated in consolidation.

 

8



 

Inventory

 

Inventory at March 31, 2004 and December 31, 2003 consisted of the following:

 

 

 

March 31,
2004

 

December 31,
2003

 

Raw materials

 

$

1,014,000

 

$

98,000

 

Work in process

 

9,000

 

 

Finished goods

 

546,000

 

233,000

 

 

 

$

1,569,000

 

$

331,000

 

 

The inventory at March 31, 2004 and December 31, 2003 consisted of raw materials, work in process and finished goods for Nomad and Flic.  Inventory is stated at the lower of cost or market, with cost determined on a weighted average basis.  Management periodically assesses the need to provide for obsolescence of inventory and adjusts the carrying value of inventory to its net realizable value when required.

 

Net Loss Per Share

 

Basic net loss per share is calculated on the basis of the weighted-average number of common shares outstanding during the reporting periods.  Diluted net loss per share is calculated on the basis of the weighted-average number of common shares outstanding and taking into account the dilutive effect of all potential common stock equivalents outstanding.  Diluted net loss per share for the three months ended March 31, 2004 and 2003 is equal to basic net loss per share because the effect of potential common stock outstanding during the periods, including options and warrants, is anti-dilutive.

 

The components of basic and diluted earnings per share were as follows (in thousands except earnings per share data):

 

 

 

Three months ended
March 31,

 

 

 

2004

 

2003

 

Numerator:

 

 

 

 

 

Net loss available

 

$

(6,690

)

$

(7,396

)

Denominator:

 

 

 

 

 

Basic and diluted weighted-average common shares outstanding

 

21,459

 

15,948

 

 

 

 

 

 

 

Basic and diluted net loss per share

 

$

(.31

)

$

(.46

)

 

9



 

As of March 31, 2004 and 2003, the Company had outstanding options and warrants to purchase 6,230,000 and 4,564,000 shares of common stock, respectively.  As of March 31, 2004 and 2003, Lumera had outstanding options and warrants to purchase 1,699,000 and 939,000 shares of common stock, respectively.

 

Stock-Based Compensation

 

The Company accounts for stock-based employee compensation arrangements in accordance with the provisions of Accounting Principles Board Opinion (“APB”) No. 25, “Accounting for Stock Issued to Employees” and related amendments and interpretations including FASB Interpretation Number (“FIN”) 44, “Accounting for Certain Transactions Involving Stock Compensation,” and complies with the disclosure provisions of Statement of Financial Accounting Standards (“SFAS”) No. 123, “Accounting for Stock-Based Compensation.”  The Company accounts for equity instruments issued to non-employees in accordance with the provisions of SFAS No. 123 and Emerging Issues Task Force Issue No. 96-18 “Accounting for Equity Instruments that are Issued to other than Employees for Acquiring, or in Conjunction with Selling, Goods or Services.”

 

Total non-cash stock-based compensation expense related to employee and director awards was $240,000 and $45,000 for the three months ended March 31, 2004 and 2003, respectively.  Had compensation expense for employee and director options been determined using the fair values at the grant dates consistent with the methodology prescribed under SFAS 123, the Company’s consolidated net loss available to common shareholders and associated net loss per share would have increased to the pro forma amounts indicated below (in thousands):

 

10



 

 

 

Three Months Ended
March 31,

 

 

 

2004

 

2003

 

Net Loss available for common shareholders, as reported

 

$

(6,690

)

$

(7,396

)

 

 

 

 

 

 

Add: Stock-based employee compensation expense included in net loss available for common shareholders, as reported

 

52

 

44

 

 

 

 

 

 

 

Deduct: Incremental stock-based employee compensation expense determined under fair value based method for all awards

 

(2,429

)

(3,669

)

 

 

 

 

 

 

Net Loss available for common shareholders, pro forma

 

$

(9,067

)

$

(11,021

)

 

 

 

 

 

 

Net Loss per share As reported

 

$

(.31

)

$

(.46

)

(Basic and diluted)

 

 

 

 

 

Pro Forma

 

$

(.42

)

$

(.69

)

 

Equity

 

In March 2004, Lumera raised $500,000, before issuance costs, from the sale of 250,000 shares of Series B convertible preferred stock to a group of private investors.  Microvision did not participate in the offering.

 

Segment Information

 

The Company is organized into two segments - Microvision, which is engaged in the development and commercialization of scanned beam technology for information displays and image capture products, and Lumera, which is engaged in the development and commercialization of products utilizing its optical materials technology.  The segments were determined based on how management views and evaluates the Company’s operations.

 

The following table reflects the results of the Company’s reportable segments under the Company’s financial management system.  The performance of each segment is measured based

 

11



 

on several metrics.  These results are used, in part, by management in evaluating the performance of, and in allocation of resources to, each of the segments.

 

 

 

Three months ended March 31, 2004

 

 

 

(in thousands)

 

 

 

Microvision

 

Lumera

 

Eliminations

 

Total

 

Contract revenue

 

$

1,983

 

$

316

 

$

 

$

2,299

 

Product revenue

 

675

 

 

 

 

 

675

 

Cost of contract revenue

 

1,011

 

194

 

 

1,205

 

Cost of product revenue

 

665

 

 

 

665

 

Research and development expense

 

3,152

 

1,467

 

 

4,619

 

Marketing, general and administrative expense

 

4,133

 

440

 

 

4,573

 

Non-cash compensation expense

 

182

 

501

 

 

683

 

Interest income

 

102

 

 

 

102

 

Interest expense

 

8

 

 

 

8

 

Segment loss

 

6,391

 

2,286

 

(1,987

)

6,690

 

Depreciation

 

386

 

297

 

 

683

 

Expenditures for capital assets

 

197

 

15

 

 

212

 

Segment assets

 

31,282

 

3,361

 

(7,449

)

27,194

 

 

 

 

 

 

 

 

 

 

 

 

 

Three months ended March 31, 2003

 

 

 

(in thousands)

 

 

 

Microvision

 

Lumera

 

Eliminations

 

Total

 

Contract revenue

 

$

3,033

 

$

369

 

$

 

$

3,402

 

Product revenue

 

135

 

 

 

135

 

Cost of contract revenue

 

1,106

 

198

 

 

1,304

 

Cost of product revenue

 

105

 

 

 

105

 

Research and development expense

 

5,047

 

1,753

 

 

6,800

 

Marketing, general and administrative expense

 

3,945

 

340

 

 

4,285

 

Non-cash compensation expense

 

213

 

252

 

 

465

 

Interest income

 

100

 

23

 

 

123

 

Interest expense

 

14

 

 

 

14

 

Segment loss

 

7,162

 

2,124

 

(1,890

)

7,396

 

Depreciation

 

511

 

298

 

 

809

 

Expenditures for capital assets

 

15

 

323

 

 

338

 

Segment assets

 

35,576

 

6,916

 

(6,589

)

35,903

 

 

12



 

Subsequent Events

 

In April 2004, Lumera raised $2,300,000, from the issuance of a convertible notes to investors.  The notes accrue interest at a rate of 6.5% per annum and are payable on demand at the earlier of March 31, 2004 or upon closing of a specified financing.  The principal and any accrued but unpaid interest is convertible at any time, at the option of the holder into shares of Lumera Class A common stock.  The conversion price is the lesser of $6.00 per share of common stock or the price per share offered in a specified financing.  In connection with the offering, Lumera also issued warrants to purchase up to 30% of the number of shares to which the notes could be converted, of Lumera common stock.  The exercise price of the warrants is equal to the lesser of $7.20 per share or 120% of the price per share offered in a specified financing.  All of the warrants are exercisable on the date of grant and expire in April 2009.

 

In April 2004, Lumera and the University of Washington entered into a fourth amendment to the Sponsored Research Agreement.  Under terms of the amendment Lumera’s total payment obligation to the University of Washington is reduced to $5,750,000.  As of March 31, 2004, Lumera has made payments totaling $4,375,000 under the agreement.  The remaining payments are $125,000 in the second quarter of 2004, $250,000 in third and fourth quarters of 2004 and $375,000 in the first and second quarters of 2005.

 

13



 

ITEM 2           MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Forward-Looking Statements

 

The information set forth in this report in Item 2, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and Item 3, “Quantitative and Qualitative Disclosure about Market Risk,” includes “forward-looking statements” within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and is subject to the safe harbor created by that section.  Such statements may include, but are not limited to, projections of revenues, income or loss, capital expenditures, plans for product development and cooperative arrangements, future operations, financing needs or plans of the Company, as well as assumptions relating to the foregoing.  The words “believe,” “expect,” “will,” “anticipate,” “estimate,” “project,” “plan,” and similar expressions identify forward-looking statements, which speak only as of the date the statement was made. Factors that could cause results to differ materially from those projected or implied in the forward-looking statements are set forth below under the caption “Risk Factors Relating to the Company’s Business.”

 

Overview

 

The company includes both Microvision, Inc. (“Microvision”) and its consolidated subsidiary, Lumera Corporation (“Lumera”) (collectively the “Company”).  The Company designs and markets information display and image capture products and products utilizing its optical and related materials technology.  The Company is developing and seeks to commercialize technologies and products in two business segments relating to the display, capture and transmission of information:

 

 

Microvision -                      Develops and commercializes scanned beam technology for information displays and image capture products.

 

Lumera -                                                Develops proprietary polymer materials and products based on those materials for a broad range of applications.

 

Microvision

 

Nomad

 

In March 2004, Microvision introduced a new version of the Nomad Expert Technician System (“Nomad”), a head worn, monochrome red, see-through display.  The new version is about 40% smaller, lighter and costs less to manufacture than the prior version. Microvision has worked closely with automotive companies, including Honda Motor Company of North America, to develop the Nomad for automotive maintenance applications. In maintenance applications, the automotive technician uses the Nomad to provide repair instructions directly in his or her field of

 

14



 

view while he or she is performing the repair.  The Nomad is linked to a computer or thin client that, along with a wireless network card, allows the technician wireless access to service information.  In trials, technicians using the Nomad have reported substantial time savings in performing repairs.  There are over 850,000 automotive technicians in the United States who work in facilities that have, or can easily acquire, the digital content to take advantage of the Nomad display.

 

The U.S. Army has deployed 100 Nomad systems in the U.S. Army’s Stryker Brigade Combat Team, in Iraq.  The helmet-mounted Nomad Augmented Vision System provides the vehicle commander with a head-up, daylight-readable, remote display of the Stryker’s onboard battlefield computer while operating from the commander’s hatch.  The Nomad allows the commander to observe the surroundings, while choosing the optimum path ahead, commanding the vehicle and better using tactical information.

 

Microvision plans to use a contract manufacturer in Washington State to build the Nomad.  Microvision will distribute the Nomad directly to end customers through its sales force, through independent manufacturers’ representatives and through original equipment manufacturers.

 

Flic

 

In 2002, Microvision introduced Flic, a hand-held bar code scanner.  Flic features a proprietary design that provides for lower power consumption and lower cost than other currently available bar code scanners.  In 2003, Microvision introduced Flic cordless, a Bluetooth enabled version of Flic.  During 2003, Microvision worked with its customers to add required features for specific markets, and with application developers to develop integrated solutions that utilize Flic.  This work resulted in an order for over 5,000 Flics from NCR during the fourth quarter of 2003, which units were delivered to NCR during the first quarter of 2004.  Microvision expects that the sales volume for Flic will grow as customers complete their trials and application developers release products incorporating Flic.

 

Flic is manufactured for Microvision by a contract manufacturer located in Batam, Indonesia.  Microvision distributes Flic directly to end users through value added resellers, original equipment manufacturers such as NCR, and through phone and internet orders.

 

Other Applications

 

Microvision is continuing to develop prototype automotive head-up displays, electronic view finders, and image capture products.  These prototypes demonstrate that scanned beam display technology can be used in different potential display and image capture products.  Microvision believes that it can further develop these prototypes into products that will meet the customers specifications for size, image quality and cost.  Microvision plans to continue development work on these potential products in 2004.

 

15



 

Lumera

 

WiFi Antennas

 

In February 2004, Lumera introduced indoor/outdoor directional antennas for 802.11a and 802.11b/g wireless networks that incorporate its technology.  Lumera believes its antennas will have better range, security and quality of service at lower prices than competing antennas.  The antennas are designed to help customers with wireless networks improve security by containing the network signal within a well-defined perimeter, effectively preventing any access to the radio frequency signal from outside the premises.  The antennas are compact enough to be integrated into a laptop computer and other types of consumer electronic devices.

 

Lumera plans to distribute the antennas to WiFi network operators and systems integrators.  The antennas are currently being evaluated and tested by a major provider of wireless network services and also a computer manufacturer.  Lumera plans to perform small scale production of the antennas in its facility in Bothell, Washington.  Lumera plans to use contract manufacturers for volume production.

 

Electro-Optical Modulators

 

Lumera is developing a high-speed electro-optical modulator based on its proprietary materials technology that may provide a direct replacement for currently available lithium niobate modulators.  The function of an electro-optical modulator is to encode data into laser beams that carry and deliver data throughout optical fiber networks.  Currently, external electro-optical modulators are made from several kinds of inorganic crystalline materials.  These materials include lithium niobate and semiconductor III-V materials such as gallium arsenide and indium phosphide.  These materials allow fast modulation for large volume data delivery, but have the disadvantage that they require relatively high voltages to operate.  The current performance levels of inorganic materials cannot be easily improved because they are limited by the intrinsic properties of such materials.

 

Lumera plans to develop optical components that offer increased speed, reduced size and cost, greater reliability, and more efficient operation than existing electro-optic component technologies.  Moreover, Lumera believes that its materials technology is well suited to the manufacture of highly complex, highly integrated optical systems.

 

MicroArray Platform Chip

 

In February 2004, Lumera announced a new MicroArray platform chip for bio-analysis and genomic testing.  Lumera has received a request from a DNA analysis company to provide sample quantities of chips for evaluation and testing.  The MicroArray chip uses Lumera’s proprietary polymer materials and processes to create a coating for chips that increase the number of sample spots on the chip, thereby reducing the cost of testing.  The Micro-Array chip will initially be used to test for SNPs (single nucleotide polymorphisms) associated with inherited susceptibility to certain diseases.  Lumera plans future versions of the MicroArray chip with an

 

16



 

intelligent surface designed to meet specific customer testing requirements for low cost disposable diagnostics.  Lumera plans initially to manufacture the MicroArray chip in its facility in Bothell, Washington.

 

Results of Operations

 

THREE MONTHS ENDED MARCH 31, 2004 COMPARED TO

THREE MONTHS ENDED MARCH 31, 2003

 

Contract Revenue The Company earns contract revenue from performance on development contracts with United States government and commercial customers.  Contract revenue in the three months ended March 31, 2004 decreased by approximately $1.1 million, or 32%, to $2.3 million from $3.4 million in the same period in 2003.  The decline in contract revenue is due to a decline in contract volume and backlog in the three months ended March 31, 2004 compared to the same period in 2003.  For the three months ended March 31, 2004, 54% of contract revenue was derived from performance on development contracts with the United States government and 46% from performance on development contracts with commercial customers.  For the three months ended March 31, 2003, 43% of contract revenue was derived from performance on development contracts with the United States government, and 57% from performance on development contracts with commercial customers.

 

The Company believes that as long as the majority of its revenue is earned from performance on development contracts there may be a high degree of variability in revenue from quarter to quarter.

 

The backlog of development contracts at March 31, 2004 was $2.7 million, compared to $4.4 million at March 31, 2003 all of which is scheduled for completion during the next twelve months.

 

Product Revenue.  The Company earns product revenue from sales of Nomad and Flic.  Product revenue in the three months ended March 31, 2004 increased by $540,000, or 400%, to $675,000 from $135,000 in the same period in 2003. For the three months ended March 31, 2004, substantially all product revenue was derived from the sales of Flic units.  For the three months ended March 31, 2003, 54% of product revenue was derived from the sales of Flic units and 46% from the sales of Nomad units, respectively.  The increase in product revenue is attributable to an increase in sales of Flic units and accessories to NCR and other customers.

 

The Company believes that product revenue will increase from both Flic and Nomad as the products gain market acceptance.  Quarterly revenue may vary substantially due to the timing of product orders from customers, production capacity, and raw material availability.

 

The backlog of product orders at March 31, 2004 was approximately $300,000, all of which is scheduled for delivery during the next twelve months.  Approximately 72% of the backlog is for Nomad units and the remainder is for Flic units and accessories.

 

17



 

Cost of Contract Revenue.  Cost of contract revenue includes both the direct and allocated indirect costs of performing on development contracts.  Direct costs include labor, materials and other costs incurred directly in performing on a contract.  Indirect costs include labor and other costs associated with operating the Company’s research and development department and building the Company’s technical capabilities and capacity.  Cost of contract revenue is determined both by the level of direct costs incurred on development contracts and by the level of indirect costs incurred in operating and building the Company’s technical capabilities and capacity.  The cost of contract revenue can fluctuate substantially from period to period depending on the level of both the direct costs incurred in the performance of projects and the level of indirect costs incurred.

 

Cost of contract revenue for the three months ended March 31, 2004 decreased by $99,000 or 8% to $1,205,000 from $1,304,000 in the same period in 2003.  Total direct costs for the three months ended March 31, 2004 decreased by 14% from the same period in 2003.  The total direct labor component of direct costs for the three months ended March 31, 2004 decreased by 11% from the same period in 2003.

 

Research and development overhead is allocated to both cost of contract revenue and research and development expense based on the proportion of direct labor cost incurred in cost of contract revenue and research and development, respectively.  As a result of the lower direct labor cost for the three months ended March 31, 2004, approximately 2% less overhead was allocated to cost of contract revenue than in the same period in 2003.  The lower labor cost was partially offset by higher overhead rates in 2004 compared to the same period in 2003

 

The Company expects that cost of contract revenue on an absolute dollar basis will increase in the future.  This increase will likely result from additional development contract work that the Company expects to perform.  The cost of revenue as a percentage of revenue can fluctuate significantly from period to period, depending on the contract structure and the levels of direct and indirect costs incurred.  The Company expects the cost of contract revenue, as a percentage of contract revenue, will fluctuate modestly over time.

 

Cost of Product Revenue.  Cost of product revenue includes both the direct and allocated indirect costs of manufacturing Nomad and Flic units sold to customers.  Direct costs include labor, materials and other costs incurred directly in the manufacture of Flic and Nomad.  Indirect costs include labor and other costs associated with operating the Company’s manufacturing operations.

 

Cost of product revenue for the three months ended March 31, 2004 increased by $560,000 or 533% to $665,000 from $105,000 in the same period in 2003.  The increase is directly related to the increase in product revenue.

 

Manufacturing overhead is allocated to inventory, product cost of revenue, contract cost of revenue, and research and development expense based on the proportion of direct material purchased during the period for the respective activity.

 

18



 

The Company expects that cost of product revenue on an absolute dollar basis will increase in the future.  This increase will likely result from planned sales of commercial products.  The cost of product revenue as a percentage of product revenue can fluctuate significantly from period to period, depending on the volume of direct materials purchased, the level of overhead expense and the product mix.

 

Research and Development Expense.  Research and development expense consists of:

 

      Compensation related costs of employees and contractors engaged in internal research and product development activities,

      Research fees paid to the University of Washington under Sponsored Research Agreement,

      Costs incurred in acquiring and maintaining licenses,

      Laboratory operations, outsourced development and processing work,

      Fees and expenses related to patent applications, prosecution and protection,

      Nomad production costs in excess of Nomad revenue, respectively, and

      Other operating expenses.

 

Research and development expense in the three months ended March 31, 2004 decreased by $2.2 million, or 32%, to $4.6 million from $6.8 million in the same period in 2003.

 

During 2003, manufacturing overhead was expensed to research and development cost because the Flic and Nomad production capacity was not mature.  In the first quarter of 2004, Microvision applied manufacturing overhead to material purchases. In addition, in the first quarter of 2003 Microvision recorded a $450,000 write down of Nomad inventory.  These changes resulted in approximately $1.0 million reduction in research and development expense during the first quarter of 2004 compared to the same period in 2003.  The remaining reduction is related to the closing of Microvision’s facility in San Mateo, California during the second quarter of 2003, and other cost reductions.

 

The Company believes that a substantial level of continuing research and development expense will be required to complete development of a new version of Nomad and to develop additional commercial products using the scanned beam display technology and the polymer materials technology.  Accordingly, the Company anticipates its level of research and development spending will continue to be substantial.  These expenses could be incurred as a result of:

 

      Subcontracting work to development partners,

      Expanding and equipping in-house laboratories,

      Acquiring rights to additional technologies,

      Incurring related operating expenses, and

      Hiring additional technical and support personnel.

 

19



 

Marketing, General and Administrative Expense.  Marketing, general and administrative expenses include compensation and support costs for sales, marketing, management and administrative staff, and for other general and administrative costs, including legal and accounting expenses, consultants and other operating expenses.

 

Marketing, general and administrative expenses in the three months ended March 31, 2004 increased by $288,000, or 7%, to $4.6 million from $4.3 million in the same period in 2003.  The increase was primarily attributable to an increase in marketing costs in support of the new version of Nomad product introduction.  The Company expects marketing, general and administrative expenses to increase, commensurate with increases in revenue, in future periods as the Company:

 

        Adds to its sales and marketing staff,

        Incurs additional costs in sales and marketing activities, and

        Increases the level of corporate and administrative activity.

 

Non-Cash Compensation Expense.  Non-cash compensation expense in the three months ended March 31, 2004 increased $218,000, or 47%, to $683,000 from $465,000 in the same period in 2003.

 

The following table shows the major components of non-cash compensation expense for the three months ended March 31, 2004 and 2003, respectively.

 

 

 

Three months ended
March 31,

 

 

 

2004

 

2003

 

Lumera stock issued to the University of Washington

 

$

159,000

 

$

251,000

 

Microvision and Lumera securities issued to third parties

 

284,000

 

169,000

 

Microvision and Lumera stock options issued to employees

 

37,000

 

45,000

 

Lumera options issued to independent directors

 

203,000

 

 

 

 

$

683,000

 

$

465,000

 

 

At March 31, 2004, the Company had $1,091,000 of unamortized non-cash compensation expense that will be amortized over the next three years.

 

Interest Income and Expense.  Interest income in the three months ended March 31, 2004 decreased by $21,000, or 17%, to $102,000 from $123,000 in the same period in 2003.  This decrease resulted primarily from lower average cash and investment securities balances in the

 

20



 

three months ended March 31, 2004 than the average cash and investment securities balances in the same period of the prior year.

 

Interest expense in the three months ended March 31, 2004 was relatively consistent with the same period in 2003, as the Company’s borrowings also remained relatively constant.

 

Liquidity and Capital Resources

 

The Company has funded operations to date primarily through the sale of common stock, convertible preferred stock, warrants and, to a lesser extent, from development contract revenues and product sales. At March 31, 2004, the Company had $14.8 million in cash, cash equivalents and investment securities.

 

Cash used in operating activities totaled $7.5 million during the three months ended March 31, 2004, compared to $6.8 million during the same period in 2003.  Cash used in operating activities for each period resulted primarily from the net loss for the period.

 

The Company also had the following significant changes in assets and liabilities:

 

        “Inventory”.  Inventory increased $1.2 million to $1.6 million at March 31, 2004 from $331,000 at December 31, 2003.  The increase is primarily attributable to the start of production of the new version of Nomad.  Microvision plans to begin delivery of Nomads to customers during the second quarter of 2004.

 

        “Accounts Payable”.  Accounts payable increased $1.1 million to $2.3 million at March 31, 2004 from $1.2 million at December 31, 2003.  The increase is attributable to the increase in inventory purchases as described above.  The Company generally has 30 day payment terms with its vendors.

 

Cash provided by investing activities totaled $1.8 million during the three months ended March 31, 2004, compared to $2.0 million during the same period of 2003.  During the three months ended March 31, 2004, the Company had net sales of investment securities of $2.0 million compared to $2.3 million during the same period in 2003.  The proceeds from the net sales of investment securities were used to fund the Company’s operations.

 

The Company used cash of $212,000 for capital expenditures during the three months ended March 31, 2004, compared to $338,000 during the same period in 2003.  Capital expenditures include leasehold improvements to leased office space and computer hardware and software, laboratory equipment and furniture and fixtures to support growth.

 

Cash provided by financing activities totaled $706,000 during the three months ended March 31, 2004, compared to $11.8 million during the same period in 2003.

 

21



 

In March 2004, Lumera raised $500,000 from the sale of 250,000 shares of Series B convertible preferred stock to a group of private investors.  Microvision did not participate in the offering.

 

Future operating expenditures and capital requirements will depend on numerous factors, including the following:

 

      The progress of research and development programs,

      The progress in commercialization activities and arrangements,

      The cost of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights,

      Competing technological and market developments, and

      The Company’s ability to establish cooperative development, joint venture and licensing arrangements.

 

Microvision and Lumera maintain separate cash and investment accounts.  Each company’s cash and investments are generally used to fund its own business activities.

 

The Company believes that Microvision’s current cash, cash equivalents and investment securities balances of $14.4 million as of March 31, 2004 will satisfy its budgeted cash requirements through at least December 31, 2004, based on Microvision’s current operating plan.

 

The Company believes that Lumera’s cash, cash equivalents and investment securities balance of approximately $400,000 as of March 31, 2004, plus the amounts raised in its April 2004 issuance of a convertible note, will satisfy Lumera’s budgeted cash requirements through the second quarter of 2004.

 

Microvision’s and Lumera’s capital requirements will depend on many factors.  With respect to Microvision such factors include, the level and mix of revenue, the rate at which Microvision can directly, or through arrangements with original equipment manufacturers, introduce additional products incorporating the scanned beam technology and the market acceptance and competitive position of such products.  With respect to Lumera such factors include, the rate at which Lumera can directly or through arrangements with original equipment manufacturers, introduce products incorporating the polymer materials technology and the market acceptance and competitive position of such products.  Both Microvision and Lumera may require additional capital to fund their operations and implement their business plans. There can be no assurance that additional financing will be available to either Microvision or Lumera or that, if available, it will be available on terms acceptable to them on a timely basis.  If adequate funds are not available to satisfy either short-term or long-term capital requirements or planned revenues are not generated, either or both companies may be required to limit their operations substantially.  This limitation of operations may include reduction in capital expenditures and reductions in staff and discretionary operating costs, which may include non-contractual Microvision and Lumera research costs.

 

Microvision is not contractually obligated to provide additional funding to Lumera.

22



 

Subsequent Events

 

In April 2004, Lumera raised $2,300,000, from the issuance of a convertible notes to investors.  The notes accrue interest at a rate of 6.5% per annum and are payable on demand at the earlier of March 31, 2004 or upon closing of a specified financing.  The principal and any accrued but unpaid interest is convertible at any time, at the option of the holder into shares of Lumera Class A common stock.  The conversion price is the lesser of $6.00 per share of common stock or the price per share offered in a specified financing.  In connection with the offering, Lumera also issued warrants to purchase up to 30% of the number of shares to which the notes could be converted, of Lumera common stock.  The exercise price of the warrants is equal to the lesser of $7.20 per share or 120% of the price per share offered in a specified financing.  All of the warrants are exercisable on the date of grant and expire in April 2009.

 

In April 2004, Lumera and the University of Washington entered into a fourth amendment to the Sponsored Research Agreement.  Under terms of the amendment Lumera’s total payment obligation to the University of Washington is reduced to $5,750,000.  As of March 31, 2004 Lumera has made payments totaling $4,375,000 under the agreement.  The remaining payments are $125,000 in the second quarter of 2004, $250,000 in third and fourth quarters of 2004, and $375,000 in the first and second quarters of 2005.

 

23



 

Risk Factors Relating to the Company’s Business

 

We have a history of operating losses and expect to incur significant losses in the future.

 

We have had substantial losses since our inception and we anticipate an operating loss at least through the year ending December 31, 2004.  We cannot assure you that we will ever become or remain profitable.

 

      As of March 31, 2004, we had an accumulated deficit of $161.0 million.

      We incurred consolidated net losses of $100.9 million from inception through 2001, $27.2 million in 2002, $26.2 million in 2003, and $6.7 million for the three months ended March 31, 2004.

 

The likelihood of our success must be considered in light of the expenses, difficulties and delays frequently encountered by companies formed to develop and market new technologies.  In particular, our operations to date have focused primarily on research and development of the scanned beam technology and development of demonstration units.  We introduced our first two commercial products during 2002.  We are unable to accurately estimate future revenues and operating expenses based upon historical performance.

 

We cannot be certain that we will succeed in obtaining additional development contracts or that we will be able to obtain customer orders for our products.  In light of these factors, we expect to continue to incur substantial losses and negative cash flow at least through 2004 and likely thereafter.  We cannot be certain that we will achieve positive cash flow at any time in the future.

 

We will require additional capital to continue to fund our operations and to implement our business plan.  If we do not obtain additional capital, we may be required to limit our operations substantially.  Raising additional capital may dilute the value of current shareholders’ shares.

 

Based on our current operating plan and budgeted cash requirements, we believe that we can fund our operations through 2004.  We will require additional capital to continue to fund our operations, including to:

 

      Further develop the scanned beam and polymer materials technologies,

      Add manufacturing capacity,

      Develop and protect our intellectual property rights, and

      Fund long-term business development opportunities.

 

If revenues are less than we anticipate, if the level and mix of revenues vary from anticipated amounts and allocations or if expenses exceed the amounts budgeted, we may require additional capital earlier to further the development of our technologies, for expenses associated with product development, and to respond to competitive pressures or to meet unanticipated

 

24



 

development difficulties.  In addition, our operating plan provides for the development of strategic relationships with systems and equipment manufacturers that may require additional investments by us.  Additional financing may not be available to us or, if available, may not be available on terms acceptable to us on a timely basis.  If adequate funds are not available to satisfy either short-term or long-term capital requirements, we may be required to limit our operations substantially.  Our capital requirements will depend on many factors, including, but not limited to, the rate at which we can, directly or through arrangements with original equipment manufacturers, introduce products incorporating the scanned beam and optical material technologies and the market acceptance and competitive position of such products.  Raising additional capital may involve issuing securities with rights and preferences that are senior to our common stock and may dilute the value of current shareholders’ shares.

 

We cannot be certain that the scanned beam technology or products incorporating this technology will achieve market acceptance.  If the scanned beam technology does not achieve market acceptance, our revenues may not grow.

 

Our success will depend in part on customer acceptance of the scanned beam technology.  The scanned beam technology may not be accepted by manufacturers who use display technologies in their products, by systems integrators who incorporate our products into their products or by consumers of these products. To be accepted, the scanned beam technology must meet the expectations of our potential customers in the defense, industrial, medical and consumer markets.  If our technology fails to achieve market acceptance, we may not be able to continue to develop the scanned beam technology.

 

It may become more difficult to sell our stock in the public market.

 

Our common stock is listed for quotation on the Nasdaq National Market.  To keep our listing on this market, we must meet Nasdaq’s listing maintenance standards.  If we are unable to continue to meet Nasdaq’s listing maintenance standards, our common stock could be delisted from the Nasdaq National Market.  If our common stock were delisted, we likely would seek to list the common stock on the Nasdaq SmallCap Market, the American Stock Exchange or on a regional stock exchange.  Listing on such other market or exchange could reduce the liquidity for our common stock.  If our common stock were not listed on the SmallCap Market or an exchange, trading of our common stock would be conducted in the over-the-counter market on an electronic bulletin board established for unlisted securities or directly through market makers in our common stock.  If our common stock were to trade in the over-the-counter market, an investor would find it more difficult to dispose of, or to obtain accurate quotations for the price of, the common stock.  A delisting from the Nasdaq National Market and failure to obtain listing on such other market or exchange would subject our securities to so-called penny stock rules that impose additional sales practice and market-making requirements on broker-dealers who sell or make a market in such securities.  Consequently, removal from the Nasdaq National Market and failure to obtain listing on another market or exchange could affect the ability or willingness of broker-dealers to sell or make a market in our common stock and the ability of purchasers of our common stock to sell their securities in the secondary market.  In addition, when the market price of our common stock is less than $5.00 per share, we become subject to penny stock rules even if

 

25



 

our common stock is still listed on the Nasdaq National Market.  While the penny stock rules should not affect the quotation of our common stock on the Nasdaq National Market, these rules may further limit the market liquidity of our common stock and the ability of investors to sell our common stock in the secondary market.  During the second, third and fourth quarters of 2002 and the first and second quarter of 2003, the market price of our stock traded below $5.00 per share.

 

Our lack of the financial and technical resources relative to our competitors may limit our revenues, potential profits and overall market share.

 

Our current products and potential future products will compete with established manufacturers of existing products and companies developing new technologies.  Many of our competitors have substantially greater financial, technical and other resources than us.  Because of their greater resources, our competitors may develop products or technologies that are superior to our own.  The introduction of superior competing products or technologies could result in reduced revenues, lower margins or loss of market share, any of which could reduce the value of our business.

 

We may not be able to keep up with rapid technological change and our financial results may suffer.

 

The information display industry, Wi-Fi industry and the optical communications industry have been characterized by rapidly changing technology, accelerated product obsolescence and continuously evolving industry standards.  Our success will depend upon our ability to further develop the scanned beam and the polymer materials technologies and to cost effectively introduce new products and features in a timely manner to meet evolving customer requirements and compete with competitors’ product advances.  We may not succeed in these efforts because of:

 

      delays in product development,

      lack of market acceptance for our products, or

      lack of funds to invest in product development and marketing.

 

The occurrence of any of the above factors could result in decreased revenues and market share.

 

We could face lawsuits related to our use of the scanned beam technology or other technologies.  Defending these suits would be costly and time consuming.  An adverse outcome in any such matter could limit our ability to commercialize our technology and products, reduce our revenues and increase our operating expenses.

 

We are aware of several patents held by third parties that relate to certain aspects of scanned beam displays, image capture products, Wi-Fi antennas, and organic materials.  These patents could be used as a basis to challenge the validity, limit the scope or limit our ability to obtain additional or broader patent rights of our patents or patents we have licensed.  A successful challenge to the validity of our patents or patents we have licensed could limit our ability to commercialize the scanned beam technology and other technologies and, consequently,

 

26



 

materially reduce our revenues. Moreover, we cannot be certain that patent holders or other third parties will not claim infringement by us with respect to current and future technology.  Because U.S. patent applications are held and examined in secrecy, it is also possible that presently pending U.S. applications will eventually be issued with claims that will be infringed by our products or the scanned beam technology.  The defense and prosecution of a patent suit would be costly and time consuming, even if the outcome were ultimately favorable to us.  An adverse outcome in the defense of a patent suit could subject us to significant cost, to require others and us to cease selling products that incorporate scanned beam technology, to cease licensing scanned beam technology or to require disputed rights to be licensed from third parties.  Such licenses, if available, would increase our operating expenses.  Moreover, if claims of infringement are asserted against our future co-development partners or customers, those partners or customers may seek indemnification from us for damages or expenses they incur.

 

Our planned future products are dependent on advances in technology by other companies.

 

We rely on and will continue to rely on technologies, such as light sources and optical components that are developed and produced by other companies.  The commercial success of certain of our planned future products will depend in part on advances in these and other technologies by other companies.  Due to the current business environment, many companies that are developing new technologies are reducing expenditures on research and development.  This may delay the development and commercialization of components we would use to manufacture certain of our planned future products.

 

Our products may be subject to future health and safety regulations that could increase our development and production costs.

 

Products incorporating scanned beam display technology could become subject to new health and safety regulations that would reduce our ability to commercialize the scanned beam display technology. Compliance with any such new regulations would likely increase our cost to develop and produce products using the scanned beam display technology and adversely affect our financial results.

 

If we cannot manufacture products at competitive prices, our financial results will be adversely affected.

 

To date, we have produced limited quantities of Nomad and Flic, and demonstration units for research, development and demonstration purposes.  The cost per unit for these units currently exceeds the level at which we could expect to profitably sell these products.  If we cannot lower our cost of production, we may face increased demands on our financial resources, possibly requiring additional equity and/or debt financing to sustain our business operations.

 

27



 

Our future growth will suffer if we do not achieve sufficient market acceptance of our products to compete effectively.

 

Our success depends, in part, on our ability to gain acceptance of our current and future products by a large number of customers.  Achieving market-based acceptance for our products will require marketing efforts and the expenditure of financial and other resources to create product awareness and demand by potential customers.  We may be unable to offer products consistently or at all that compete effectively with products of others on the basis of price or performance.  Failure to achieve broad acceptance of our products by potential customers and to effectively compete would have a material adverse effect on our operating results.

 

Because we plan to continue using foreign contract manufacturers, our operating results could be harmed by economic, political, regulatory and other factors existing in foreign countries.

 

We currently use a contract manufacturer in Asia to manufacture Flic, and we plan to continue using foreign manufacturers to manufacture some of our products where appropriate.  These international operations are subject to inherent risks, which may adversely affect us, including:

 

     political and economic instability;

 

      high levels of inflation, historically the case in a number of countries in Asia;

 

      burdens and costs of compliance with a variety of foreign laws;

 

      foreign taxes; and

 

      changes in tariff rates or other trade and monetary policies.

 

If we experience delays or failures in developing commercially viable products, we may have lower revenues.

 

We began production of Nomad, our first commercial product, in December 2001.  In September 2002, we introduced Flic, our second commercial product.  In addition, we have developed demonstration units incorporating the scanned beam technology, and demonstration units have been built using the polymer materials technology.  However, we must undertake additional research, development and testing before we are able to develop additional products for commercial sale.  Product development delays by us or our potential product development partners, or the inability to enter into relationships with these partners, may delay or prevent us from introducing products for commercial sale.

 

28



 

If we cannot supply products in commercial quantities, we will not achieve commercial success.

 

We are developing our capability to manufacture products in commercial quantities.  Our success depends in part on our ability to provide our components and future products in commercial quantities at competitive prices.  Accordingly, we will be required to obtain access, through business partners or contract manufacturers, to manufacturing capacity and processes for the commercial production of our expected future products.  We cannot be certain that we will successfully obtain access to sufficient manufacturing resources. Future manufacturing limitations of our suppliers could result in a limitation on the number of products incorporating our technology that we are able to produce.

 

If our licensors and we are unable to obtain effective intellectual property protection for our products and technology, we may be unable to compete with other companies.

 

Intellectual property protection for our products is important and uncertain.  If we do not obtain effective intellectual property protection for our products, processes and technology, we may be subject to increased competition.  Our commercial success will depend in part on our ability and the ability of the University of Washington and our other licensors to maintain the proprietary nature of the scanned beam display, organic materials and other key technologies by securing valid and enforceable patents and effectively maintaining unpatented technology as trade secrets.  We try to protect our proprietary technology by seeking to obtain United States and foreign patents in our name, or licenses to third-party patents, related to proprietary technology, inventions, and improvements that may be important to the development of our business.  However, our patent position and the patent position of the University of Washington and other licensors involves complex legal and factual questions. The standards that the United States Patent and Trademark Office and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change.  Additionally, the scope of patents are subject to interpretation by courts and their validity can be subject to challenges and defenses, including challenges and defenses based on the existence of prior art. Consequently, we cannot be certain as to the extent to which we will be able to obtain patents for our new products and technology or the extent to which the patents that we already own or license from others protect our products and technology.  Reduction in scope of protection or invalidation of our licensed or owned patents, or our inability to obtain new patents, may enable other companies to develop products that compete with ours on the basis of the same or similar technology.

 

We also rely on the law of trade secrets to protect unpatented know-how and technology to maintain our competitive position. We try to protect this know-how and technology by limiting access to the trade secrets to those of our employees contractors and partners with a need to know such information and by entering into confidentiality agreements with parties that have access to it, such as our employees, consultants and business partners. Any of these parties could breach the agreements and disclose our trade secrets or confidential information, or our competitors might learn of the information in some other way.  If any trade secret not protected by a patent were to be disclosed to or independently developed by a competitor, our competitive position could be materially harmed.

 

29



 

We could be exposed to significant product liability claims that could be time-consuming and costly, divert management attention and adversely affect our ability to obtain and maintain insurance coverage.

 

We may be subject to product liability claims if any of our product applications are alleged to be defective or cause harmful effects.  For example, because our scanned beam displays are designed to scan a low power beam of colored light into the user’s eye, the testing, manufacture, marketing and sale of these products involve an inherent risk that product liability claims will be asserted against us.  Product liability claims or other claims related to our products, regardless of their outcome, could require us to spend significant time and money in litigation, divert management time and attention, require us to pay significant damages, harm our reputation or hinder acceptance of our products.  Any successful product liability claim may prevent us from obtaining adequate product liability insurance in the future on commercially desirable or reasonable terms.  An inability to obtain sufficient insurance coverage at an acceptable cost or otherwise to protect against potential product liability claims could prevent or inhibit the commercialization of our products.

 

We rely heavily on a limited number of development contracts with the U.S. government, which are subject to immediate termination by the government for convenience at any time, and the termination of one or more of these contracts could have a material adverse impact on our operations.

 

In 2003 and 2002, 49% and 83%, respectively, of our consolidated revenue was derived from performance on a limited number of development contracts with the U.S. government.  For the three months ended March 31, 2004, 42% of our revenue was derived from performance on development contracts with the U.S. government.  Therefore, any significant disruption or deterioration of our relationship with the U.S. government would significantly reduce our revenues.  Our government programs must compete with programs managed by other contractors for limited amounts and uncertain levels of funding.  The total amount and levels of funding are susceptible to significant fluctuations on a year-to-year basis.  Our competitors continuously engage in efforts to expand their business relationships with the government and are likely to continue these efforts in the future.  Our contracts with the government are subject to immediate termination by the government for convenience at any time.  The government may choose to use contractors with competing display technologies or it may decide to discontinue any of our programs altogether.  In addition, those development contracts that we do obtain require ongoing compliance with applicable government regulations.  Termination of our development contracts, a shift in government spending to other programs in which we are not involved, a reduction in government spending generally, or our failure to meet applicable government regulations could have severe consequences for our results of operations.

 

30



 

Our products have long sales cycles, which make it difficult to plan our expenses and forecast our revenues.

 

We have a lengthy sales cycle that involves numerous steps including discussion of a product application, exploring the technical feasibility of a proposed product, evaluating the costs of manufacturing a product and manufacturing or contracting out the manufacturing of the product.  Our long sales cycle, which can last several years, makes it difficult to predict the quarter in which sales will occur.  Delays in sales could cause significant variability in our revenues and operating results for any particular quarterly period.

 

Our exploratory arrangements may not lead to products that will be profitable.

 

Our developmental contracts, including our relationships with parties such as the U.S. government, Canon, BMW and Volkswagen of America, are exploratory in nature and are intended to develop new types of products for new applications.  These efforts may prove unsuccessful, and these relationships may not result in the development of products that will be profitable.

 

Our revenues are highly sensitive to developments in the defense and aerospace industries.

 

Our revenues to date have been derived principally from product development research relating to defense applications of the scanned beam display technology.  We believe that development programs and sales of potential products in this market will represent a significant portion of our future revenues.  Developments that adversely affect the defense sector, including delays in government funding and a general economic downturn, could cause our revenues to decline substantially.

 

Our Virtual Retinal Display technology and polymer materials technology depend on our licenses from the University of Washington.  If we lose our rights under the licenses, our operations would be adversely affected.

 

We have acquired the exclusive rights to the Virtual Retinal Display and polymer materials technology under two licenses from the University of Washington.  These licenses expire upon expiration of the last of the University of Washington’s patents that relate to this technology, which we currently anticipate will not occur until after 2011 and 2019, respectively.  We could lose our exclusivity under these licenses if we fail to respond to an infringement action or fail to use our best efforts to commercialize the licensed technology.  In addition, the University of Washington may terminate the licenses upon our breach and has the right to consent to all sublicense arrangements.  If we were to lose our rights under the licenses, or if the University of Washington were to refuse to consent to future sublicenses, we would lose a competitive advantage in the market, and may even lose the ability to commercialize our products completely.  Either of these results could substantially decrease our revenues.

 

We are dependent on third parties in order to develop, manufacture, sell and market our products.

 

Our strategy for commercializing the scanned beam technology and products incorporating the scanned beam technology includes entering into cooperative development, sales and marketing

 

31



 

arrangements with corporate partners, original equipment manufacturers and other third parties.  We cannot be certain that we will be able to negotiate arrangements on acceptable terms, if at all, or that these arrangements will be successful in yielding commercially viable products.  If we cannot establish these arrangements, we would require additional capital to undertake such activities on our own and would require extensive manufacturing, sales and marketing expertise that we do not currently possess and that may be difficult to obtain.  In addition, we could encounter significant delays in introducing the scanned beam technology or find that the development, manufacture or sale of products incorporating the scanned beam technology would not be feasible.  To the extent that we enter into cooperative development, sales and marketing or other joint venture arrangements, our revenues will depend upon the performance of third parties.  We cannot be certain that any such arrangements will be successful.

 

Loss of any of our key personnel could have a negative effect on the operation of our business.

 

Our success depends on our executive officers and other key personnel and on the ability to attract and retain qualified new personnel.  Achievement of our business objectives will require substantial additional expertise in the areas of sales and marketing, research and product development and manufacturing.  Competition for qualified personnel in these fields is intense, and the inability to attract and retain additional highly skilled personnel, or the loss of key personnel, could reduce our revenues and adversely affect our business.

 

Our quarterly performance may vary substantially and this variance, as well as general market conditions, may cause our stock price to fluctuate greatly and potentially expose us to litigation.

 

Our revenues to date have been generated from a limited number of development contracts with U.S. government entities and commercial partners. Our quarterly operating results may vary significantly based on:

 

      reductions or delays in funding of development programs involving new information display technologies by the U.S. government or our current or prospective commercial partners;

      changes in evaluations and recommendations by any securities analysts following our stock or our industry generally;

      announcements by other companies in our industry;

      changes in business or regulatory conditions;

      announcements or implementation by our competitors of technological innovations or new products;

      the status of particular development programs and the timing of performance under specific development agreements;

      economic and stock market conditions; or

      other factors unrelated to our company or industry.

 

In one or more future quarters, our results of operations may fall below the expectations of securities analysts and investors and the trading price of our common stock may decline as a

 

32



 

consequence.  In addition, following periods of volatility in the market price of a company’s securities, shareholders often have instituted securities class action litigation against that company.  If we become involved in a class action suit, it could divert the attention of management, and, if adversely determined, could require us to pay significant damages.

 

If we fail to manage expansion effectively, our revenue and expenses could be adversely affected.

 

Our ability to successfully offer products and implement our business plan in a rapidly evolving market requires an effective planning and management process. We have significantly expanded the scope of our operations. The growth in business and relationships with customers and other third parties has placed, and will continue to place, a significant strain on our management systems and resources. We will need to continue to improve our financial and managerial controls, reporting systems and procedures and will need to continue to train and manage our work force.

 

Additional risks associated with the Lumera segment.

 

We cannot be certain that products based on our polymer materials will achieve market acceptance.

 

Lumera’s success will depend in part on the commercial acceptance of the polymer materials technology.  The optical communications industry is currently fragmented with many competitors developing different technologies.  We expect that only a few of these technologies ultimately will gain market acceptance.  Products based on the polymer materials may not be accepted by original equipment manufacturers and systems integrators of optical communications networks.  The Wi-Fi antenna market is evolving rapidly and involves many competitors and competing technologies.  To be accepted, the polymer material based products must meet the technical and performance requirements of our potential customers in the telecommunications industry.  If our optical materials technology fails to achieve market acceptance, we may not be able to continue to develop the technology.

 

Our lack of the financial and technical resources relative to our competitors may affect our ability to commercialize the polymer materials.

 

The optical switching market is a highly competitive market.  Other companies, that have substantially greater financial, technical and other resources than us, are working on competing technologies.  Because of their greater resources, our competitors may develop products or technologies that are superior to our own, and may more successfully market and sell their products.  These advantages may make it difficult for the polymer materials technology to become commercially viable, which could reduce the value of our business.

 

33



 

Some of our products are directed at the telecommunications and networking markets, which have recently been subject to overcapacity and slow growth or decline.  Lumera’s revenues are highly sensitive to developments in the telecommunications and networking industries.

 

A substantial portion of our future sales may be derived from product sales in the telecommunications and the networking markets.  Developments that adversely affect the telecommunications or networking markets, including delays in traffic growth, government regulation or a general economic downturn, could slow or halt our revenue growth.  The recent downturn in the telecommunications market may continue to adversely affect our business.  Reduced capital spending and technology investment by telecommunications companies may make it more difficult for our products to gain market acceptance.  Customers may be less willing to purchase new technology such as ours or invest in new technology development when they have limited cash.  A substantial portion of Lumera’s expected revenues will be derived from product sales to original equipment manufacturers and system integrators in the telecommunications and the networking industry.  We believe that sales of potential products in this market could represent a significant portion of our future revenues.  Developments that adversely affect the telecommunications or networking sectors, including delays in traffic growth, government regulation or a general economic downturn, could slow or halt our revenue growth.

 

34



 

ITEM 3.          QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

Substantially all of the Company’s cash equivalents and investment securities are at fixed interest rates and, as such, the fair value of these instruments is affected by changes in market interest rates.  Due to the generally short-term maturities of these investment securities, the Company believes that the market risk arising from its holdings of these financial instruments is not material.  A one-percent change in market interest rates would have approximately a $41,000 impact on the fair value of the investment securities.

 

The Company’s investment policy restricts investments to ensure principal preservation and liquidity.  The Company invests cash that it expects to use within approximately sixty days in U.S. treasury-backed instruments. The Company invests cash in excess of that amount in high quality investment securities.  The investment securities portfolio is limited to U.S. government and U.S. government agency debt securities and other high-grade securities generally with maturities of three years or less.

 

The weighted average maturities of cash equivalents and investment securities available-for-sale as of March 31, 2004, are as follows (dollar amounts in thousands):

 

 

 

Amount

 

Percent

 

Cash and equivalents

 

$

1,171

 

7.92

%

Less than one year

 

13,619

 

92.08

%

 

 

$

14,790

 

100.00

%

 

Presently, all of the Company’s development contract payments are denominated in U.S. dollars and, consequently, the Company believes it has no foreign currency exchange rate risk.  However, in the future the Company may enter into development contracts or product sales in foreign currencies that may subject the Company to foreign exchange rate risk.

 

From time to time the company makes purchases denominated in foreign currencies.  Due to the short maturity and low value of these purchases, the company believes its foreign exchange risk from these purchases is immaterial.

 

35



 

ITEM 4.          CONTROLS AND PROCEDURES

 

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we have evaluated the effectiveness of the design and operation of our disclosure controls and procedures as of the end of the period covered by this report and, based on their evaluation, our principal executive officer and principal financial officer have concluded that these controls and procedures are effective.  There were no changes in our internal control over financial reporting that occurred during the period covered by this report that have materially affected, or are reasonably likely to materially affect, these controls.  Disclosure controls and procedures are our controls and other procedures that are designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934, as amended, is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms.  Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports that we file under the Securities Exchange Act is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.

 

36



 

PART II

OTHER INFORMATION

 

ITEM 6.          EXHIBITS AND REPORTS ON FORM 8-K

 

(a)

 

Exhibits

 

 

 

31.1

 

Chief Executive Officer Certification Pursuant to Rule 13a-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

 

 

31.2

 

Chief Financial Officer Certification Pursuant to Rule 13a-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 Of the Sarbanes-Oxley Act of 2002

 

 

 

32.1

 

Chief Executive Officer Certification pursuant to Section 1350, Chapter 63 of Title 18, United States Code, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

 

 

32.2

 

Chief Financial Officer Certification pursuant to Section 1350, Chapter 63 of Title 18, United States Code, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

 

 

(b)

 

Reports on Form 8-K

 

 

 

 

 

The Company filed the following current reports on Form 8-K during the quarter ended March 31, 2004:

 

 

Current report on 8-K announcing financial results for the year ended December 31, 2003, as filed with the SEC on March 15, 2004.

 

37



 

 

SIGNATURES

 

In accordance with the requirements of the Exchange Act, the registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

 

MICROVISION, INC.

 

 

 

 

Date:  May 10, 2004

/s/  Richard F. Rutkowski

 

 

Richard F. Rutkowski

 

 

Chief Executive Officer

 

 

(Principal Executive Officer)

 

 

 

 

Date:  May 10, 2004

/s/  Jeff Wilson

 

 

Jeff Wilson

 

 

Vice President, Accounting

 

 

(Principal Accounting Officer)

 

38



 

EXHIBIT INDEX

 

The following documents are filed.

 

Exhibit
Number

 

Description

 

 

 

31.1

 

Chief Executive Officer Certification Pursuant to Rule 13a-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

 

 

31.2

 

Chief Financial Officer Certification Pursuant to Rule 13a-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 Of the Sarbanes-Oxley Act of 2002

 

 

 

32.1

 

Chief Executive Officer Certification pursuant to Section 1350, Chapter 63 of Title 18, United States Code, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

 

 

32.2

 

Chief Financial Officer Certification pursuant to Section 1350, Chapter 63 of Title 18, United States Code, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

39