Back to GetFilings.com

Use these links to rapidly review the document
Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Form 10-K

Commission file number 0-4041

ALLIED MOTION TECHNOLOGIES INC.
(Exact name of registrant as specified in its charter)

Registrant's telephone number, including area code: (303) 799-8520

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act: Common Stock, no par value

        Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

        Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

        Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Act). Yes o    No ý

        As of December 31, 2003, the aggregate market value of voting stock held by non-affiliates of the Registrant, computed by reference to the average bid and asked prices of such stock approximated $5,799,000.

        Number of shares of the only class of Common Stock outstanding: 5,018,455 as of March 19, 2004

Table of Contents

PART I

Item 1. Business.

        Allied Motion Technologies, Inc. (the Company) was organized under the laws of Colorado in 1962. The Company is engaged in the business of designing, manufacturing and selling motor and servo motion products primarily to the Commercial Motor, Industrial Motion Control and Aerospace and Defense markets. Prior to July 29, 2002, the Company was also engaged in designing, manufacturing and selling advanced systems and instrumentation to the worldwide power and process industries. As discussed more fully in Note 2 of the Notes to Consolidated Financial Statements, on July 29, 2002, the Company sold substantially all of its Power and Process Business, and in March 2003 finalized the sale of the Calibrator Business, completing the sale of all its Power and Process Business, therefore transforming the Company and focusing all of its resources in the motor and motion products markets (Motion Strategy). The Company operates primarily in the United States and the United Kingdom. Prior to the sale of its Power and Process Business, the Company also had joint venture investments in China. Prior to October 2002, the Company was known as Hathaway Corporation. In connection with the sale of its Power and Process Business, the Hathaway name became the property of the buyers. At the October 2002 Annual Meeting of Stockholders, a proposal was approved to amend the Articles of Incorporation to change the Company's name to Allied Motion Technologies, Inc.

        Allied Motion utilizes its underlying core "Electromagnetic Motion Know How" to provide compact, high performance products as solutions to a variety of motion applications. The served markets include on and off road vehicles, semi-conductor equipment, packaging, medical, actuation, military, commercial aviation and industrial automation, and fiber-optic based telecommunications. End products using Allied Motion technology include HVAC systems for trucks, buses and off-road vehicles, medical equipment, processing equipment for the semiconductor industry, missile and munitions control systems for the military, anti-lock brake and fuel cell applications for the specialty automotive market, satellite tracking systems, MRI scanners, high definition printers and tunable lasers, wavelength meters and spectrum analyzers for the fiber optic industry as well as various applications in the medical market.

        Allied Motion is organized into three subsidiaries: Emoteq Corporation (Emoteq—Tulsa, OK), Computer Optical Products, Inc. (COPI—Chatsworth, CA), and Motor Products Corporation (Motor Products—Owosso, MI).

        Emoteq designs, manufactures and markets direct current brushless motors, related components, and drive and control electronics as well as a family of static frequency converters for military and aerospace applications and has extensive experience in power electronics design and software development required for the application of specialized drive electronics technology. Markets served include semiconductor manufacturing, industrial automation, medical equipment, and military and aerospace. Emoteq also manufactures precision direct current fractional horsepower motors and certain motor components and spare parts and replacement equipment for general-purpose instrumentation products. Industrial equipment and military products are the major application for the motors.

        Optical encoders are manufactured by COPI. They are used to measure rotational and linear movements of parts in diverse applications such as printers, sorting machinery, machine tools, robots, medical equipment, tunable lasers and spectrum analyzers. The primary markets for the optical encoders are in the industrial, computer peripheral manufacturing, medical and telecommunications sectors. COPI also designs, manufactures and markets fiber optic-based encoders with special characteristics, such as immunity to radio frequency interference and high temperature tolerance, suited for industrial, aerospace and military environments. Applications include airborne navigational systems, anti-lock braking transducers, missile flight surface controls and high temperature process control equipment.

1

        Motor Products, located in Owosso, Michigan has been a motor producer for more than sixty years and is a vertically integrated manufacturer of customized, highly engineered sub-fractional horsepower permanent magnet DC and brushless DC motors serving a wide range of original equipment applications. The motors are used in HVAC and actuation systems in a variety of markets including trucks, buses, RV's, off-road vehicles, health, fitness, medical and industrial equipment.

        On February 10, 2004, the Company signed a merger agreement to acquire Owosso Corporation located in Watertown, New York. The closing of the merger is scheduled for the second quarter of 2004 and is subject to approval by Owosso's shareholders, the filing of an effective registration statement for the Company's securities and customary closing conditions. Owosso's sole operating subsidiary, Stature Electric, Inc., manufactures fractional and integral horsepower motors, gear motors, and motor part sets. Significant markets for Stature include commercial products and equipment, healthcare, recreation and non-automotive transportation. Stature's component products are sold throughout North America and in Europe, primarily to original equipment manufacturers that use them in their end products.

Fiscal Year End Change

        The Company changed its fiscal year end from June 30 to December 31 effective December 31, 2002; and, therefore, the Company reported a six-month transition period ending December 31, 2002. The following table describes the periods presented in this Form 10-K.

Product Distribution

        The Company maintains a direct sales force. In addition to its own marketing and sales force, the Company has independent sales representatives and agents to sell its various product lines in certain markets.

Competition

        The Company faces competition in all of its markets, although the number of competitors varies depending upon the product. The Company believes there are numerous competitors in the motion control market. Competition involves primarily product performance and price, although service and warranty are also important.

Financial Information about Operating Segments

        The information required by this item is set forth in Note 11 of the Notes to Consolidated Financial Statements contained herein.

Availability of Raw Materials

        All parts and materials used by the Company are in adequate supply. No significant parts or materials are acquired from a single source.

2

Patents, Trademarks, Licenses, Franchises and Concessions

        The Company holds several patents and trademarks regarding components used by the various subsidiaries; however, none of these patents and trademarks are considered to be of major significance.

Seasonality of the Business

        The Company's business is not of a seasonal nature; however, revenues may be influenced by customers' fiscal year ends and holiday seasons.

Working Capital Items

        The Company currently maintains inventory levels adequate for its short-term needs based upon present levels of production. The Company considers the component parts of its different product lines to be readily available and current suppliers to be reliable and capable of satisfying anticipated needs.

Sales to Large Customers

        During Year 2003, the Transition Period, and Fiscal Year 2002, no single customer accounted for more than 10% of total revenues. During Fiscal Year 2001 one customer accounted for 20% of the Company's consolidated revenue from continuing operations. The customer is a leading manufacturer of test instrumentation for the fiberoptic telecommunications industry. During Fiscal Year 2002, the customer cancelled a $4.75 million order. The Company's products are still designed into the customer's products, however deliveries of our products have been halted by the customer because of the economic downturn. The Company is also delivering products to this customer under other orders at this time.

Sales Backlog

        The Company's backlog at December 31, 2003 consisted of sales orders totaling approximately $13,383,000 while backlog at December 31, 2002 was $13,663,000. In our commercial motors markets, the Company is experiencing an increased number of its customers going on a "pull system" whereby the Company agrees to maintain available inventory that the customer "pulls" or takes delivery as they need the products. At the time the customer pulls the product, the Company records the order and sale. Approximately 50% of our customers in commercial motors markets were on a pull system in 2003 compared to 35% in 2002. Accordingly, this trend will reduce the amount of backlog since these customers are no longer giving the Company long-term orders that it delivers against over time and, therefore, the amount of backlog compared to prior periods is not necessarily an accurate indication of the future sales of the Company compared to prior periods.

        There can be no assurance that the Company's backlog can be converted into revenue.

Government Sales

        Approximately $86,000 of the Company's backlog as of December 31, 2003 consisted of contracts with the United States Government. The Company's contracts with the government contain a provision generally found in government contracts that permits the government to terminate the contract at its option. When the termination is attributable to no fault of the Company, the government would, in general, have to pay the Company certain allowable costs up to the time of termination, but there is no compensation for loss of profits.

Engineering and Development Activities

        The Company's expenditures on engineering and development for Year 2003 were $1,853,000. For the Transition Period, Fiscal Years 2002, and 2001 engineering and development from continuing

3

operations were $754,000, $846,000, and $962,000, respectively. Of these expenditures, no material amounts were charged directly to customers.

Environmental Issues

        No significant pollution or other types of emission result from the Company's operations and it is not anticipated that the Company's proposed operations will be affected by Federal, State or local provisions concerning environmental controls. However, there can be no assurance that any future regulations will not affect the Company's operations.

        See Item 3 Legal Proceedings and Note 8 of the Notes to Consolidated Financial Statements contained herein for additional information required by this item.

Foreign Operations

        The information required by this item is set forth in Note 11 of the Notes to Consolidated Financial Statements contained herein.

Employees

        At December 31, 2003 the Company had approximately 343 full-time employees.

Available Information

        The Company maintains a website at www.alliedmotion.com. The Company makes available, free of charge on or through its website, its annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after it electronically files or furnishes such materials to the Securities and Exchange Commission.

        The Company has adopted a Code of Ethics for its chief executive officer, president and senior financial officers. A copy of this Code has been filed as an exhibit to this Form 10-K. The Company intends to make the Code available on the Company's website and to disclose on this website any amendment to this Code. Waivers under this Code, if any, will be disclosed under the rules of the SEC and the Nasdaq Small Cap Market. A copy of this Code is also available in print to any stockholder upon written request addressed to Allied Motion Technologies Inc., 23 Inverness Way East, Suite 150, Englewood, CO 80112-5711.

Item 2. Properties.

        As of December 31, 2003, the Company occupies facilities as follows:

        The Company's management believes the above-described facilities are adequate to meet the Company's current and foreseeable needs. All facilities described above are operating at less than full capacity.

4

Item 3. Legal Proceedings.

        In 2001, the Company, with other parties, was named as a defendant in an environmental contamination lawsuit. The lawsuit relates to property that was occupied by the Company's Power and Process Business over 37 years ago. In connection therewith, the Company agreed to settle the lawsuit and recorded an estimated charge for the settlement and related legal fees of $1,429,000 ($961,000 net of tax) during the fiscal year ended June 30, 2002. The settlement agreement received court approval during the Transition Period. While the Company believes that the suit against the Company was without merit, it agreed to the settlement to eliminate future costs of defending itself and the uncertain risks associated with litigation. Additional information required by this item is set forth in Note 8 of the Notes to Consolidated Financial Statements contained herein.

        The Company is also involved in certain actions that have arisen out of the ordinary course of business. Management believes that resolution of the actions will not have a significant adverse affect on the Company's consolidated financial position or results of operations.

Item 4. Submission of Matters to a Vote of Security Holders.

        The Company held its annual stockholders' meeting on October 23, 2003. The stockholders voted on one item.

        The stockholders elected E.E. Prince, R.D. Smith, G.D. Hubbard, D.D. Hock and G.J. Pilmanis to serve on the Board of Directors for the coming year. The vote tabulation was as follows:

5

PART II

Item 5. Market for Registrant's Common Equity and Related Stockholder Matters.

        Allied Motion's common stock is traded on the Nasdaq Small Cap Market System and trades under the symbol AMOT. The number of holders of record of the Company's common stock as of the close of business on February 23, 2004 was 552. The Company did not pay or declare any dividends during year 2003, or during the Transition Period, Fiscal Years 2002, and 2001 and the Company's long-term financing agreement prohibits the Company from doing so without prior approval.

        The following table sets forth, for the periods indicated, the high and low prices of the Company's common stock on the Nasdaq Small Cap Market System, as reported by Nasdaq.

Equity Compensation Plan Information

        The following table shows the equity compensation plan information of the Company at December 31, 2003.

Item 6. Selected Financial Data.

        The following tables summarize data from the Company's financial statements for the fiscal years 1999 through 2003 and the Transition and Comparative Periods and notes thereto; the Company's complete annual financial statements and notes thereto for the current fiscal year appear in Item 8

6

herein. See Management's Discussion and Analysis for discussion of non-recurring items that affect the comparability of results between periods.

7

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations.

        All statements contained herein that are not statements of historical fact constitute "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, without limitation, any statement that may predict, forecast, indicate, or imply future results, performance, or achievements, and may contain the word "believe," "anticipate," "expect," "project," "intend," "will continue," "will likely result," "should" or words or phrases of similar meaning. Forward-looking statements involve known and unknown risks and uncertainties that may cause actual results of the Company to differ materially from the forward-looking statements. The risks and uncertainties include international, national and local general business and economic conditions in the Company's motion markets, introduction of new technologies, products and competitors, the ability to protect the Company's intellectual property, the ability of the Company to sustain, manage or forecast its growth and product acceptance, success of new corporation strategies and implementation of defined critical issues designed for growth and improvement in profits, the continued success of the Company's customers to allow the Company to realize revenues from its order backlog and to support the Company's expected delivery schedules, the continued viability of the Company's customers and their ability to adapt to changing technology and product demand, the ability of the Company to meet the technical specifications of its customers, the continued availability of parts and components, increased competition and changes in competitor responses to the Company's products and services, changes in government regulations, availability of financing, the ability of the Company's lenders and financial institutions to provide additional funds if needed for operations or for making future acquisitions or the ability of the Company to obtain alternate financing if present sources of financing are terminated, the ability to attract and retain qualified personnel who can design new applications and products for the motion industry, the ability of the Company to identify and consummate favorable acquisitions to support external growth and new technology, and the ability of the Company to control costs for the purpose of improving profitability. The Company's ability to compete in this market depends upon its capacity to anticipate the need for new products, and to continue to design and market those products to meet customers' needs in a competitive world. Actual results, events and performance may differ materially. Readers are cautioned not to place undue reliance on these forward-looking statements as a prediction of actual results. The Company has no obligation or intent to release publicly any revisions to any forward looking statements, whether as a result of new information, future events, or otherwise.

        New risk factors emerge from time to time and it is not possible for management to predict all such risk factors, nor can it assess the impact of all such risk factors on its business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward- looking statements. The Company's expectations, beliefs and projections are expressed in good faith and are believed to have a reasonable basis; however, the Company makes no assurance that expectations, beliefs or projections will be achieved.

        Because of the risks and uncertainties, investors should not place undue reliance on forward-looking statements as a prediction of actual results. The Company has no obligation or intent to release publicly any revisions to any forward-looking statements, whether as a result of new information, future events, or otherwise.

Overview

Business

        Allied Motion designs, manufactures and sells motion products to a broad spectrum of customers throughout the world primarily for the commercial motor, industrial motion control, and aerospace and defense markets. The Company's products are in use in an ever-greater number of demanding applications in specialty automotive, HVAC, medical, health-fitness, defense, aerospace, semiconductor

8

manufacturing, fiber optic-based telecommunications, printing, and graphic imaging market sectors, to name a few.

        Today, three companies form the core of Allied Motion. The companies, Emoteq, Computer Optical Products and Motor Products offer a wide range of standard motors, encoders and drives for original equipment manufacturers (OEM) and end user applications. A particular strength of each company is its ability to design and manufacture custom motion control solutions to meet the needs of its customers.

        Emoteq Corporation in Tulsa, Oklahoma develops and manufactures advanced servo motor and drive solutions. Emoteq has developed specialized, high performance servo solutions. As a result, Emoteq's products are at work in precision equipment applications around the world from semiconductor manufacturing equipment to fuel cell powered vehicles to high performance target tracking systems.

        Computer Optical Products (COPI) in Chatsworth, California solves difficult feedback application problems with innovative optical encoder solutions. Combining their considerable expertise in mechanical, optical, and electronic technologies, COPI's engineers have developed unique encoding solutions for numerous and diverse applications from pre-press imaging equipment to missile seeker heads. Integrating their custom high resolution sine-cosine optical encoders with customers' motor actuators is a particular strength of the company.

        Motor Products Corporation in Owosso, Michigan has been supplying fractional horsepower DC motors to original equipment manufacturers in a myriad of industries for over sixty years. Allied Motion acquired Motor Products in July 2002 to further the Company's strategy to become a leading supplier in the motion industry. Motor Products specializes in the design of custom brush DC motors for specific customer applications, and supplies them with uniformly high quality in quantities ranging from tens to the tens of thousands. Motor Products motors are in use worldwide in commercial and industrial applications in HVAC and heat-transfer systems, fans and blowers, pumps, electro-mechanical actuators, and both over-the-road trucks and buses and off-road vehicles.

Business and Strategy Overview

        During 2002, management significantly changed the structure and strategy of the Company. The Company had historically operated in two business segments under the name Hathaway Corporation: Motion Control and Power and Process. During 2002, the Company sold substantially all its power and process business segment and transformed the Company to a focused motion company under the name Allied Motion Technologies Inc.

        During 2002 and 2003, the Company has made considerable progress in implementing its new corporate strategy, the driving force of which is "Applied Motion Technology/Know How", and in the transformation of Allied Motion into a growth oriented motion company. To ensure the implementation of all of our critical issues that are necessary to accomplish our overall strategy, we launched a formal process, called Strategy Deployment, in each Allied Motion operation. The Strategy Deployment process includes the development of action plans and a rigorous and regular implementation review process to ensure we achieve the objectives of our Strategic Plan.

        During 2003, the Company initiated recruitment efforts for various engineering and sales and marketing positions to enhance its ability to increase sales in the future. The overhead cost reductions and the parallel recruitment efforts are consistent with improving our "Areas of Excellence" and the redeployment of resources in support of our strategy as an Applied Motion Technology/Know-How company. Key resources have been added in electrical design, mechanical design and in applied marketing and it is our belief these key resources will allow us to accelerate our current product re-design as well as our new product development efforts. We fully expect our recruiting efforts to

9

result in cost effective and innovative new designs and solutions that will provide us with the technology platform to obtain a leadership position in our served market segments.

        Also during 2003 the Company began the re-alignment of its sales team to focus on selected vertical target market segments. Already, this has resulted in a much better understanding of these markets and through the emphasis on our applications expertise we will now be aligned to provide improved support for our customers in the future which we believe should contribute to the Company's growth in sales and profitability.

        During 2003 (on a pro-forma basis for the year including Motor Products for twelve months of 2002), sales increased by approximately $1 million and operating profits increased approximately $1.2 million. To accomplish this we utilized what we call a soft implementation of various processes available to our business units through our ever evolving and expanding set of tools. This tool kit contains a well defined set of processes, training programs and procedures that are fundamental to the way we operate our businesses. We have coined the term "AST", for Allied's Systematic Tools. Based on Lean and Six Sigma principles, we provide our employees with well defined methods to addresses various assessment, development, execution and process needs within the Company. These "Tools" include strategy development, strategy deployment, applied marketing, value stream mapping, cellular manufacturing, SMED, Six Sigma, etc. The soft implementation used during the past year will move to a more vigorous and scheduled implementation in each of our business units in 2004. We believe this will allow us to improve profitability of our existing operations as well as effectively integrate new acquisitions.

        One of our major challenges, and a risk to our business, is to maintain and improve our price competitiveness. Our customers are continually being challenged by their markets and competitors to be price competitive and they are requiring their suppliers to deliver the highest quality product at the lowest price possible. For the Company to continue to be competitive in its markets, we must have the ability to continuously improve our cost of doing business while maintaining and improving the quality and performance of our products. To accomplish this, we have placed significant emphasis on reducing our costs through the implementation of AST, re-designing products and designing new products for cost improvement and manufacturing efficiency, sourcing materials and components from global low cost sources and establishing manufacturing capabilities in low cost regions. The continuous improvement in our cost of doing business is an integral part of our corporate strategy.

Subsequent Acquisition

        On February 10, 2004, the Company signed a merger agreement to acquire Owosso Corporation located in Watertown, New York. The closing of the merger is scheduled for the second quarter of 2004. Owosso's sole operating subsidiary, Stature Electric, manufactures fractional and integral horsepower motors, gear motors, and motor part sets. Significant markets for Stature include commercial products and equipment, healthcare, recreation and non-automotive transportation. Stature's component products are sold throughout North America and in Europe, primarily to original equipment manufacturers that use them in their end products.

        Stature Electric excels at engineering, designing, packaging and applying integrated gearing and motor solutions for the commercial and industrial equipment, healthcare, recreation and non-automotive transportation markets. We utilized the framework of our strategy to ensure Stature Electric and Allied Motion were strategically aligned. The markets they serve and the technology they bring are both extensions of and expansions to our current company know-how.

        The consideration for the merger of $14 million will consist of the issuance of approximately 532,200 shares of Allied Motion common stock representing approximately 9.6% of the outstanding shares of the Company after the merger, $1 million of cash payable to Owosso's preferred shareholders, assumption of $4.6 million of Owosso's debt and approximately $6 million of cash to

10

settle the remainder of Owosso's debt and liabilities at closing. Additional subordinated notes for up to $500,000 may be issued by Allied Motion effective January 1, 2005 payable over five years if Stature achieves certain revenue levels in 2004. In addition, warrants to purchase 300,000 shares of Allied Motion common stock at $4.41 per share will be issued to Owosso's preferred shareholders. Allied Motion has received a commitment from PNC Business Credit and Silicon Valley Bank for up to $18.1 million to complete the acquisition and for working capital needs. The closing of the acquisition is subject to approval by Owosso's shareholders, the effectiveness of a Registration Statement for the Allied Motion common shares to be issued and customary closing conditions.

        In addition to the acquisition of Owosso and Stature Electric, the Company continues to be in active discussions with other companies in pursuing strategic acquisitions to both provide external growth and to strengthen its technology base.

Outlook

        The following will provide a good snapshot of what Allied Motion will focus its plans on in 2004:

•

We will emphasize top line growth. Armed with our expanded "Areas of Excellence" we will launch innovative new products to our served markets and provide better service to our customers through our re-aligned sales team and market segment specialists.



•

We will remain loyal to our strategy and will be relentless in our efforts to continue cost reductions internally, utilizing "AST", Allied's Systematic Tools, and externally through our expanded strategic sourcing activities with an increased emphasis on low cost region suppliers.



•

We will continue to focus on strengthening our management team and hire top notch personnel to satisfy our critical resource requirements in our Areas of Excellence (applications and design engineering and applied marketing).



•

Through the use of "AST", Allied's Systematic Tools, we will ensure the successful integration of Stature within Allied and will position Stature to once again grow in the future.



•

We will remain diligent in our efforts to identify and cultivate additional acquisition and business development activities for our Company.

Fiscal Year End Change

        The Company changed its fiscal year end from June 30 to December 31 effective December 31, 2002; and, therefore, the Company reported a six-month Transition Period ended December 31, 2002. The following table describes the periods presented in the Management's Discussion and Analysis of Financial Condition and Results of Operations and in the condensed consolidated financial statements and related notes thereto:

11

Operating Results

Year 2003 compared to Twelve Month Comparative Period

        Effective July 29, 2002, the Company sold substantially all of its Power and Process Business and effective March 6, 2003, the Company sold its Calibrator Business, completing the sale of the Power and Process Business. Together, these two businesses comprised the Company's Power and Process segment as historically reported. See Note 12 to the accompanying consolidated financial statements for more information regarding these events. In accordance with SFAS No. 144, these businesses have been presented as discontinued operations in the accompanying consolidated financial statements. As such, the operating results from continuing operations of the Company now only include results from the Company's Motion Business. All activities related to the Power and Process segment are excluded from continuing operating results and are included in the results from discontinued operations.

        NET INCOME    The Company achieved net income of $948,000 or $.19 per diluted share for the year 2003 compared to $225,000 or $.05 per diluted share for the Twelve Month Comparative Period. The improvement is due to the sale of the Power and Process Business, the addition of Motor Products, improved gross margins through the successful implementation of lean manufacturing initiatives, including modifying manufacturing processes to reduce costs, and a $442,000 tax benefit related to the realization of a prior year state income tax refund and resolution of certain income tax related issues.

        INCOME FROM CONTINUING OPERATIONS    The Company achieved income from continuing operations of $948,000 or $.19 per diluted share for the year 2003 compared to a net loss of $59,000 or $.01 per diluted share for the Twelve Month Comparative Period. The improvement is due to the addition of Motor Products, the successful implementation of lean manufacturing initiatives, including modifying manufacturing processes to reduce costs, and a $442,000 tax benefit related to the realization of a prior year state income tax refund and resolution of certain income tax related issues.

        REVENUES    Revenues were $39,434,000 in year 2003 compared to $25,046,000 for the Twelve Month Comparative Period. Included in revenues for all of year 2003 and five months of the Twelve Month Comparative Period are revenues related to Motor Products, which was acquired on July 30, 2002. Exclusive of revenues from Motor Products, revenues increased 7% in year 2003 over the Twelve Month Comparative Period due to our success in expanding into new industry sectors including military and automotive applications. On a pro forma basis, including Motor Products revenues for the full twelve months ended December 31, 2002, revenues were 3% higher for 2003 compared to the comparable period last year.

        GROSS MARGINS    Gross margin as a percentage of revenues decreased to 26% for year 2003 from 27% for the Twelve Month Comparative Period. The primary reason for this decline is due to the impact of the Motor Products acquisition. Motor Products has not historically achieved as high a gross margin percentage from the industry sectors to which it sells as is achieved from other industry sectors to which the Company sells its products. Gross margin of 26% in 2003 compares to 22% for the twelve months ended December 31, 2002 on a pro forma basis, including Motor Products for the full period. This improvement from the pro forma basis is primarily due to cost reductions and improved efficiency resulting from the implementation of lean manufacturing initiatives, savings in material costs from purchasing material from off-shore sources and from the restructuring of the operations.

        SELLING EXPENSES    Selling expenses were $2,022,000 and $1,183,000 in year 2003 and the Twelve Month Comparative Period, respectively. This increase is primarily due to the impact of Motor Products, increased selling expenses and commissions related to the increase in revenues, and increased expenses related to the development of a focused marketing strategy including website development.

12

        GENERAL AND ADMINISTRATIVE EXPENSES    General and administrative expenses were $4,596,000 in year 2003 compared to $4,311,000 in the Twelve Month Comparative Period. This increase was due to the impact of acquiring Motor Products, increased salary cost associated with the Company's new president and chief operating officer and additional incentive bonus charges.

        ENGINEERING AND DEVELOPMENT EXPENSES    Engineering and development expenses were $1,853,000 and $1,178,000 for year 2003 and the Twelve Month Comparative Periods, respectively. This increase was primarily due to the impact of acquiring Motor Products and additional expenditures associated with engineering product development.

        AMORTIZATION AND OTHER    Amortization and other expense was $315,000 in year 2003 and $132,000 in the Twelve Month Comparative Period. This increase is due to the amortization costs related to the amortizable intangible assets acquired in the Motor Products acquisition.

        RESTRUCTURING CHARGE    Restructuring charges were $211,000 and zero for year 2003 and the Twelve Month Comparative Period, respectively. The restructuring expense relates to moving expenses and severance costs arising from workforce reductions from consolidation of the Company's manufacturing facilities.

        INTEREST EXPENSE    Interest expense for year 2003 was $226,000 and for the Twelve Month Comparative Period was $130,000. This increase is due to the additional borrowings related to the financing of the acquisition of Motor Products.

        INCOME TAXES    The provision for income taxes for year 2003 was $19,000 compared to a $17,000 benefit for the Twelve Month Comparative Period. The effective income tax rate as a percentage of income before income taxes from continuing operations was 2% in year 2003 and 47% in the Six Month Comparative Period. The difference in the effective tax rate between periods is primarily due to a $442,000 tax benefit related to the realization of a prior year state income tax refund and resolution of certain income tax related issues.

        DISCONTINUED OPERATIONS    Income from discontinued operations was zero in year 2003 compared to $284,000 in the Twelve Month Comparative Period. Included in the results for the Twelve Month Comparative Period is a pretax gain on the sale of the Power and Process Business of $1,699,000 which closed on July 29, 2002 and a writedown to the carrying value of the Calibrator Business of $259,000. Also included in the Twelve Month Comparative Period is operating income from discontinued operations of $292,000 and a pretax charge for litigation settlement and legal fees of $1,429,000 to settle an environmental contamination lawsuit filed in 2001 pursuant to which the Company was named as a defendant. The lawsuit related to property that was occupied by the Company's Power Business over 37 years ago. While the Company believed the suit against the Company was without merit, it agreed to the settlement to eliminate future costs of defending itself and the risks associated with litigation.

Transition Period compared to Six Month Comparative Period

        NET INCOME    The Company achieved net income of $328,000 or $.07 per diluted share for the Transition Period compared to a net loss of $163,000 or $.04 per diluted share for the Six Month Comparative Period.

        INCOME FROM CONTINUING OPERATIONS    The Company achieved income from continuing operations of $45,000 or $.01 per diluted share for the Transition Period compared to $60,000 or $.01 per diluted share for the Six Month Comparative Period.

        REVENUES    Revenues were $17,191,000 in the Transition Period compared to $7,868,000 for the Six Month Comparative Period. Included in revenues for the Transition Period are revenues related to

13

Motor Products, which was acquired on July 30, 2002. Exclusive of revenues from Motor Products, revenues increased 3% in the Transition Period over the Six Month Comparative Period due to our success in expanding into new industry sectors including military and automotive applications.

        GROSS MARGINS    Gross margin as a percentage of revenues decreased to 23% for the Transition Period from 30% for the Six Month Comparative Period. The primary reason for this decline is due to the impact of the Motor Products acquisition. Motor Products margin for the Transition Period was negatively impacted due to the costs associated with the integration of Ohio's manufacturing lines into the Michigan plant, including the hiring and training of more than 50 new employees. However, with the implementation of lean manufacturing and off-shore purchasing initiatives, the Company anticipates Motor Products gross margins to improve to align with the Company's legacy business and for margins to increase company wide.

        SELLING EXPENSES    Selling expenses were $726,000 and $444,000 in the Transition Period and Six Month Comparative Period, respectively. This increase is primarily due to the impact of Motor Products.

        GENERAL AND ADMINISTRATIVE EXPENSES    General and administrative expenses were $2,217,000 in the Transition Period compared to $1,403,000 in the Six Month Comparative Period. This increase was primarily due to the additional $290,000 expense from the acquisition of Motor Products and increased salary costs and expenses of $233,000 as a result of hiring additional personnel including the president and chief operating officer of the Company. Additionally the increase was due to $154,000 in business development expenses primarily related to the Company's new strategic development and lean manufacturing initiatives.

        ENGINEERING AND DEVELOPMENT EXPENSES    Engineering and development expenses were $754,000 and $422,000 for the Transition and Six Month Comparative Periods, respectively. This increase was primarily due to the impact of Motor Products.

        AMORTIZATION AND OTHER    Amortization and other expense was $131,000 in the Transition Period and $4,000 in the Six Month Comparative Period. This increase is due to the amortization costs related to the amortizable intangible assets acquired in the Motor Products acquisition.

        INTEREST EXPENSE    Interest expense for the Transition Period was $130,000 and for the Six Month Comparative Period was $10,000. This increase is due to the additional borrowings related to the financing of the acquisition of Motor Products.

        PROVISION FOR INCOME TAXES    The provision for income taxes for the Transition Period was $40,000 and for the Six Month Comparative Period was $26,000. The effective income tax rate as a percentage of income before income taxes from continuing operations was 47% in the Transition Period and 31% in the Six Month Comparative Period. The difference in the effective tax rate between periods is primarily due to the impact of foreign taxes.

        DISCONTINUED OPERATIONS    Income from discontinued operations was $283,000 in the Transition Period compared to a loss from discontinued operations of $223,000 for the Six Month Comparative Period. Included in the results for the Transition Period is a pre-tax gain on the sale of the Power and Process Business of $1,699,000 which closed on July 29, 2002 and a pretax write down to the carrying value of the Calibrator Business of $259,000. Included in the results for the Six Month Comparative Period is a pretax gain on the sale of Si Fang of $674,000, net of selling costs. Operating loss in the Transition Period increased from the Six Month Comparative Period primarily because the sale of the Power and Process Business closed on July 29,2002 and only one month's activity is included in the results of the Transition Period compared to six months results included in the Six Month Comparative Period. The month of July has historically been the least profitable month of each fiscal year.

14

Fiscal year 2002 compared to Fiscal year 2001

        NET INCOME    The Company had a net loss of $266,000 or $.06 per diluted share for fiscal year 2002 compared to net income of $1,996,000 or $.41 per diluted share for fiscal year 2001.

        INCOME FROM CONTINUING OPERATIONS    The Company had a loss of $45,000 or $.01 per diluted share for fiscal year 2002 compared to income of $2,024,000 or $.42 per diluted share for fiscal year 2001. Results for fiscal year 2002 were adversely affected by the economic slowdown, particularly in the semiconductor and telecommunications markets.

        REVENUES    Revenues from continuing operations were $15,723,000 and $21,188,000 in fiscal 2002 and 2001, respectively. The decrease was primarily due to the overall economic slowdown especially in the semiconductor and telecommunications markets.

        GROSS MARGINS    Gross margin as a percentage of revenues decreased to 32% for fiscal year 2002 from 38% for fiscal year 2001. The decrease in gross margin was due to fixed overhead costs that could not be reduced in direct correlation to reduced revenue.

        SELLING EXPENSES    Selling expenses were $901,000 and $1,162,000 in fiscal years 2002 and 2001, respectively. The decrease was due to decreased commissions and selling expenses related to the decrease in revenues.

        GENERAL AND ADMINISTRATIVE EXPENSES    General and administrative expenses were $3,497,000 in fiscal year 2002 compared to $3,200,000 in fiscal year 2001. This increase was primarily due to increased employee bonus costs.

        ENGINEERING AND DEVELOPMENT EXPENSES    Engineering and development expenses were $846,000 and $962,000 for fiscal years 2002 and 2001, respectively. This decrease was due to cost reductions made by the Company in reaction to the economic slowdown.

        AMORTIZATION AND OTHER    Amortization and other expense were $5,000 and $57,000 for fiscal years 2002 and 2001, respectively. This decrease was primarily due to the amortization of the goodwill associated with the July 1, 1998 acquisition of Emoteq UK being completed in fiscal year 2001.

        INTEREST EXPENSE    There was no interest expense for fiscal year 2002 compared to $82,000 for fiscal year 2001. The decrease is due to the elimination of the Company's outstanding debt during the first quarter of fiscal year 2002.

        BENEFIT FROM INCOME TAXES    The benefit from income taxes for fiscal year 2002 was $31,000 compared to a provision for income taxes of $598,000 for fiscal year 2001. The effective income tax rate as a percentage of income before income taxes from continuing operations was a 41% benefit in fiscal year 2002 compared to a 23% provision in fiscal year 2001. The difference in the effective tax rate between periods is primarily due to expenses not deductible for tax purposes and changes in the valuation allowance against the balance of deferred tax assets.

        DISCONTINUED OPERATIONS    Discontinued operations had a loss of $221,000 for fiscal year 2002 compared to $28,000 for fiscal year 2001. Included in the results for fiscal year 2002 is a pre-tax charge for litigation settlement and related legal fees of $1,429,000 to settle an environmental contamination lawsuit filed in 2001 pursuant to which the Company was named as a defendant. The lawsuit related to property that was occupied by the Company's Power Business over 37 years ago. While the Company believed the suit against the Company was without merit, it agreed to the settlement to eliminate future costs of defending itself and the risks associated with litigation.

15

        Also included in the results for fiscal year 2002 is the gain on the sale of the Company's investment in the Si Fang joint venture and equity income from the remaining joint venture investments in China, totaling $833,000 before tax, compared to $1,170,000 equity income from all joint ventures included in fiscal year 2001. Also included in the results for fiscal year 2001 is a pre-tax restructuring charge of $587,000 related to the restructuring of the Company's Process Business.

        Overall, operating results from discontinued operations decreased in fiscal year 2002 over fiscal year 2001 primarily due to the litigation settlement and reduced income from China joint venture activities, offset by improved margins achieved in fiscal year 2002 due to changes in product mix sold and the effect of the restructuring charge in fiscal 2001.

Liquidity and Capital Resources

        The Company's liquidity position as measured by cash and cash equivalents increased $5,000 during the Year 2003 to a balance of $1,960,000 at December 31, 2003. Cash flow provided by operating activities was $2,152,000 in Year 2003 while cash used in operating activities was $187,000, $1,428,000, and $744,000 in the Twelve Month Comparative Period, the Transition Period, and the Six Month Comparative Period, respectively. Cash flow provided from operations was $552,000 in fiscal year 2002 and $815,000 in fiscal year 2001. The differences are primarily due to changes in operating results and working capital changes.

        Cash of $764,000 and $5,584,000 was used in investing activities during Year 2003 and the Twelve Month Comparative Period, respectively. Cash of $5,077,000 was used by investing activities during the Transition Period, while cash of $2,559,000 and $1,997,000 was generated by investing activities in the Six Month Comparative Period and fiscal year 2002, respectively. Cash of $1,003,000 was used by investing activities in fiscal year 2001. During Year 2003 the Company made payments of $300,000 related to the acquisition of Motor Products and received $500,000 and $149,000 from the sale of the Power and Process Business and the Calibrator Business, respectively. During the Twelve Month Comparative Period which includes the Transition Period, the Company made payments of $12,184,000, including acquisition costs, related to the acquisition of Motor Products and received $7,020,000 in payments, net of expenses paid, related to the sale of the Power and Process Business. The cash generated in the Six Month Comparative Period and fiscal year 2002 includes $3,020,000 cash received from the sale of Si Fang. Purchases of property and equipment were $1,113,000, $865,000, $423,000, $461,000, $903,000 and $908,000 for Year 2003, the Twelve Month Comparative Period, the Transition Period, the Six Month Comparative Period and fiscal years 2002 and 2001, respectively. During the Year 2003, the Twelve Month Comparative Period and the Transition Period, restricted cash balances decreased by zero, $445,000 and $510,000, respectively while during the Six Month Comparative Period, and fiscal years 2002 and 2001, restricted cash balances increased by $55,000, $120,000 and $95,000, respectively.

        During year 2003 financing activities used $1,447,000 in cash while $4,162,000 in cash was provided in the Twelve Month Comparative Period. Financing activities provided $4,104,000 in cash for the Transition Period but used cash of $349,000, $291,000 and $769,000 in the Six Month Comparative Period and in fiscal years 2002 and 2001, respectively. In 2003, the Company made $2,000,000 in repayments on the line-of-credit, received $500,000 from new capital leases entered into during year 2003, made repayments of $21,000 on its capital leases and received $74,000 from stock transactions under employee benefit stock plans. Financing activities for the Twelve Month Comparative Period focused primarily on the activities during the Transition Period when the Company received proceeds from its line-of-credit and term loan agreements of $4,000,000 and made payments of $167,000 on its term loan. The Company also received net proceeds of $329,000 related to the activities of the employee benefit stock plans in the Twelve Month Comparative Period. During the Transition Period, besides the line-of-credit activity and term loan payments discussed above, the Company received net proceeds of $271,000 related to the activities of employee benefit stock plans. During fiscal year 2002,

16

$553,000 of cash was used to pay off the line of credit. This was offset by net proceeds from the activities of employee benefit stock plans of $262,000. In fiscal year 2001, the Company made net repayments of $993,000 to the line of credit, offset by $224,000 of cash received from activities of employee benefit stock plans.

        At December 31, 2003, the Company had $1,833,000 of debt obligations, compared with $4,133,000, zero, and $553,000 at December 31, 2002 and fiscal years ended June 30, 2002 and 2001, respectively. The December 31, 2003 debt represents borrowings on the Company's current long-term financing agreement (Agreement) with Silicon Valley Bank (Silicon), which was amended during the Transition Period to increase the Maximum Credit Limit on the line-of-credit to $4,000,000 and to add an additional $1,750,000 term loan to the Agreement.

        Under the amended Agreement, borrowing on the line-of-credit is restricted to the Maximum Credit Limit which is calculated as the lesser of $4,000,000 or 80% of the Company's eligible receivables plus the lesser of 1) 25% of the Company's eligible inventory, or 2) 30% of the Company's eligible receivables, or 3) $750,000. The Agreement was to mature on September 10, 2003 but was amended to extend the maturity date to June 30, 2004. The interest rate on the line-of-credit prior to the year 2003 amendment was equal to the prime rate plus 1.5%, but was lowered to the prime rate plus 1% (5% at December 31, 2003) with the new amendment. The interest rate may be adjusted on a quarterly basis, but not above prime rate plus 1%, if the Company achieves certain defined financial ratios. In addition to interest, the line bears a monthly unused line fee at 0.375% on the difference between the amount of the credit limit and the average daily principal balance of the line-of-credit outstanding during the month. The Company borrowed $2,250,000 on July 30, 2002 under this line-of-credit to fund the purchase of Motor Products but made $1,500,000 in repayments during Year 2003. As of December 31, 2003, the amount available under the line of credit was $2,843,000.

        Also under the amended Agreement, the Company obtained a term loan of $1,750,000. The term loan requires forty-two monthly principal payments of $41,667 plus interest through February 2, 2006. The loan matures the earlier of February 1, 2006 or the date the line-of-credit terminates which is June 30, 2004. Accordingly, amounts outstanding under the term loan have been classified as a current liability. The loan bears interest at 8.38%, but may be adjusted on a quarterly basis, but not above 8.38%, if the Company achieves certain defined financial ratios. The Company borrowed $1,750,000 under this term loan on July 30, 2002 to fund the purchase of Motor Products.

        Both loan facilities are secured by all of the assets of the Company. The Agreement prohibits the Company from paying dividends and requires that the Company maintain compliance with certain covenants related to tangible net worth and profitability. At December 31, 2003, the Company was in compliance with all covenants.

        The Company's working capital, capital expenditure and debt service requirements, including payment of the litigation settlement, are expected to be funded from cash provided by operations, the Company's existing cash balance and amounts available under the line of credit facility. The Company believes the capital currently available to it is sufficient for its currently anticipated needs for the next twelve months, but if additional capital is needed in the future, the Company would pursue additional capital via debt or equity financing. A key component of the Company's liquidity relates to the availability of amounts under the line of credit with Silicon Valley Bank. Any lack of availability of this facility could have a material adverse impact on the Company's liquidity position.

        In relation to the proposed acquisition of Owosso Corporation, the Company has received a commitment from PNC Business Credit and Silicon Valley Bank for up to $18.1 million to complete the acquisition and for working capital needs. The commitment consists of up to $10.5 million of borrowings under a revolving line of credit facility, $3.0 million of borrowings under a new term loan agreement and a stand-by letter of credit of up to $4.6 million to collateralize industrial revenue bonds.

17

See Note 14 of the Consolidated Financial Statements for further information on this proposed acquisition.

Price Levels and the Impact of Inflation

        Prices of the Company's products have not increased significantly as a result of inflation during the past several years, primarily due to competition. The effect of inflation on the Company's costs of production has been minimized through production efficiencies and lower costs of materials. The Company anticipates that these factors will continue to minimize the effects of any foreseeable inflation and other price pressures from the industries in which it operates. As the Company's manufacturing activities mainly utilize semi-skilled labor, which is relatively plentiful in the areas surrounding the Company's production facilities, the Company does not anticipate substantial inflation-related increases in the wages of the majority of its employees.

Critical Accounting Policies

        The Company has prepared its financial statements in conformity with accounting principles generally accepted in the United States, and these statements necessarily include some amounts that are based on informed judgments and estimates of management. The Company's significant accounting policies are discussed in Note 1 to the consolidated financial statements. The Company's critical accounting policies are subject to judgments and uncertainties which affect the application of such policies. The Company uses historical experience and all available information to make these judgments and estimates. As discussed below the Company's financial position or results of operations may be materially different when reported under different conditions or when using different assumptions in the application of such policies. In the event estimates or assumptions prove to be different from actual amounts, adjustments are made in subsequent periods to reflect more current information. The Company's critical accounting policies include:

        The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. The allowance is based on historical experience and judgments based on current economic and customer specific factors. Significant judgments are made by management in connection with establishing our customers' ability to pay at the time of shipment. Despite this assessment, from time to time, the Company's customers are unable to meet their payment obligations. The Company continues to monitor customers' credit worthiness, and use judgment in establishing the estimated amounts of customer receivables which may not be collected. A significant change in the liquidity or financial position of the Company's customers could have a material adverse impact on the collectibility of accounts receivable and future operating results.

        Inventory is valued at the lower of cost or market. The Company monitors and forecasts expected inventory needs based on sales forecasts. Inventory is written down or written off when it becomes obsolete or when it is deemed excess. These determinations involve the exercise of significant judgment by management. If actual market conditions are significantly different than those projected by management the recorded reserve may be adjusted, and such adjustments may have a significant impact on our results of operations. Demand for our products can fluctuate significantly, and in the past we have recorded substantial charges for inventory obsolescence

        The Company records deferred tax assets and liabilities for the estimated future tax effects of temporary differences between the tax basis of assets and liabilities and amounts recorded in the consolidated financial statements, and for operating loss and tax credit carryforwards. Realization of the recorded deferred tax assets is dependent upon the Company generating sufficient taxable income in the appropriate tax jurisdiction in future years to obtain benefit from the reversal of net deductible temporary differences and from tax credit and operating loss carryforwards. A valuation allowance is provided to the extent that management deems it more likely than not that the net deferred tax assets

18

will not be realized. The amount of deferred tax assets considered realizable is subject to adjustment in future periods if estimates of future taxable income are changed.

        The Company reviews the carrying values of its long-lived assets, including goodwill and identifiable intangibles, whenever events or changes in circumstances indicate that such carrying values may not be fully recoverable. Under previous standards, the assets had to be carried at historical cost if the projected cash flows from their use would recover their carrying amounts on an undiscounted basis and without considering interest. However, if projected cash flows were less than their carrying value, even by one dollar, the long-lived assets had to be reduced to their estimated fair value. Considerable judgment was and is required to project such cash flows and, if required, estimate the fair value of the impaired long-lived asset. Effective July 1, 2002, the Company adopted SFAS No. 142. SFAS No. 142 provides a more restrictive fair value test to evaluate goodwill and long-lived asset impairment. Depending upon future assessments of fair value, there could be impairment recorded related to goodwill and other long-lived assets.

Contractual Commitments

        For more information on the Company's contractual obligations on operating leases and contractual commitments, see Notes 4 and 8 to the consolidated financial statements. At December 31, 2003, the Company's commitments under these obligations were as follows (in thousands):

(1)

The capital lease commitments include amounts representing interest.

(2)

The line of credit Agreement matures on June 30, 2004 but can be extended upon agreement by Silicon.

(3)

The term loan matures the earlier of February 1, 2006 or the date the line-of-credit terminates which is currently June 2004. Assuming the Company's line of credit will be renewed annually, the required principal payments would be $500,000 in 2004, $500,000 in 2005 and $83,000 in 2006. This allows for the term loan to be repaid over a forty-two month period.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

        Market risk represents the risk of loss that may impact the financial position, results of operations or cash flows of the Company due to adverse changes in financial and commodity market prices and rates. The Company is exposed to market risk in the areas of changes in United States interest rates and changes in foreign currency exchange rates as measured against the United States dollar. These exposures are directly related to its normal operating and funding activities. Historically, and as of December 31, 2003, the Company has not used derivative instruments or engaged in hedging activities.

19

Interest Rate Risk

        The interest payable on the Company's line-of-credit is variable based on the prime rate, and, therefore, affected by changes in market interest rates. The line-of-credit matures in June 2004. The Company manages interest rate risk by investing excess funds in cash equivalents bearing variable interest rates that are tied to various market indices. As a result, the Company does not believe that reasonably possible near-term changes in interest rates will result in a material effect on future earnings, fair values or cash flows of the Company. A change in the interest rate of 1% on the Company's variable rate debt would have the impact of changing interest expense by approximately $7,500 annually.

Foreign Currency Risk

        After July 29, 2002, upon the sale of the Power and Process Business, the Company had one wholly-owned subsidiary located in England, but during year 2003, this subsidiary was merged into its parent company located in the United States. Historically sales from this operation were typically denominated in British Pounds, thereby creating exposures to changes in exchange rates. The Company did not believe that reasonably possible near-term changes in exchange rates would result in a material effect on future earnings, fair values or cash flows of the Company, and therefore, chose not to enter into foreign currency hedging instruments.

Item 8. Financial Statements and Supplementary Data.

20

INDEPENDENT AUDITORS' REPORT

        The Board of Directors and Stockholders of Allied Motion Technologies Inc.:

        We have audited the accompanying consolidated balance sheets of ALLIED MOTION TECHNOLOGIES INC. (a Colorado corporation) AND SUBSIDIARIES as of December 31, 2003 and 2002, and the related consolidated statements of operations, stockholders' investment and comprehensive income, and cash flows for the year ended December 31, 2003, the six-month period ended December 31, 2002, and for each of the years in the two-year period ended June 30, 2002. In connection with our audits of the consolidated financial statements, we also have audited the consolidated financial statement Schedule II-Valuation and Qualifying Accounts for the year ended December 31, 2003, the six-month period ended December 31, 2002, and for each of the years in the two-year period ended June 30, 2002. These consolidated financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

        We conducted our audits in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

        In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Allied Motion Technologies Inc. and subsidiaries as of December 31, 2003 and 2002, and the results of their operations and their cash flows for the year ended December 31, 2003, the six-month period ended December 31, 2002, and for each of the years in the two-year period ended June 30, 2002, in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

        As discussed in Note 1 to the consolidated financial statements, Allied Motion Technologies Inc. and subsidiaries adopted the provisions of Statements of Financial Accounting Standards No. 141, "Business Combinations" and No. 142, "Goodwill and Other Intangible Assets," effective July 1, 2002.

Denver, Colorado
February 19, 2004

21

ALLIED MOTION TECHNOLOGIES INC.

CONSOLIDATED BALANCE SHEETS

(In thousands, except per share data)

See accompanying notes to consolidated financial statements.

22

ALLIED MOTION TECHNOLOGIES INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share data)

See accompanying notes to consolidated financial statements.

23

ALLIED MOTION TECHNOLOGIES INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' INVESTMENT
AND COMPREHENSIVE INCOME

(In thousands)

See accompanying notes to consolidated financial statements.

24

ALLIED MOTION TECHNOLOGIES INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)