Back to GetFilings.com
================================================================================
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
-----------------
FORM 10-K
(Mark One)
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE
ACT OF 1934.
For the fiscal year ended December 30, 2001
OR
[_] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934.
For the transition period from __________ to __________
Commission File Number 1-7882
-----------------
ADVANCED MICRO DEVICES, INC.
(Exact name of registrant as specified in its charter)
Delaware 94-1692300
(I.R.S. Employer
(State or other jurisdiction Identification No.)
of
incorporation or organization)
One AMD Place, 94086
Sunnyvale, California (Zip Code)
(Address of principal executive offices)
(408) 732-2400
(Registrant's telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
(Name of each exchange
(Title of each class) on which registered)
--------------------- --------------------
$.01 Par Value Common
Stock New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act:
None
-----------------
Indicate by check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days. Yes [X] No [_]
Indicate by check mark if disclosure of delinquent filers pursuant to Item
405 of Regulation S-K is not contained herein, and will not be contained, to
the best of registrant's knowledge, in definitive proxy or information
statements incorporated by reference in Part III of this Form 10-K or any
amendment to this Form 10-K [_]
Aggregate market value of the voting stock held by non-affiliates as of
February 25, 2002.
$4,630,673,874
Indicate the number of shares outstanding of each of the registrant's
classes of common stock, as of the latest practicable date.
341,243,469 shares as of February 25, 2002.
DOCUMENTS INCORPORATED BY REFERENCE
(1) Portions of the Annual Report to Stockholders for the fiscal year ended
December 30, 2001, are incorporated into Parts II and IV hereof.
(2) Portions of the Proxy Statement for the Annual Meeting of Stockholders to
be held on April 25, 2002, are incorporated into Part III hereof.
================================================================================
AMD, Advanced Micro Devices, AMD-K6, AMD Athlon, AMD Duron, Am486,
QuantiSpeed, 3DNow! and Elan are either our trademarks or our registered
trademarks in the United States and/or other jurisdictions. Vantis is a
trademark of Lattice Semiconductor Corporation. Legerity is a trademark of
Legerity, Inc. Microsoft, Windows, Windows NT and MS-DOS are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or
other jurisdictions. Other terms used to identify companies and products may be
trademarks of their respective owners.
PART I
ITEM 1. BUSINESS
Cautionary Statement Regarding Forward-Looking Statements
The statements in this report that are forward-looking are based on current
expectations and beliefs and involve numerous risks and uncertainties that
could cause actual results to differ materially from expectations. The
forward-looking statements relate to, among other things: operating results;
anticipated cash flows; capital expenditures; gross margins; adequacy of
resources to fund operations and capital investments; our ability to produce
AMD Athlon(TM) and AMD Duron(TM) microprocessors with the performance and in
the volume required by customers on a timely basis; our ability to maintain
average selling prices of seventh-generation microprocessors despite aggressive
marketing and pricing strategies of our competitors; our ability to increase
customer and market acceptance of our seventh- and eighth-generation
microprocessors; our ability, and the ability of third parties, to provide
timely infrastructure solutions (motherboards and chipsets) to support our
microprocessors; a recovery in the communication and networking industries
leading to an increase in the demand for Flash memory products; the effect of
foreign currency hedging transactions; the process technology transition in our
submicron integrated circuit manufacturing and design facility located in
Dresden, Germany (Dresden Fab 30); and the financing, construction and
utilization of the Fujitsu AMD Semiconductor Limited (FASL) manufacturing
facilities. For a discussion of the factors that could cause actual results to
differ materially from the forward-looking statements, see the "Financial
Condition" and "Risk Factors" sections set forth in "Management's Discussion
and Analysis of Financial Condition and Results of Operations" contained in our
2001 Annual Report to Stockholders and such other risks and uncertainties as
set forth below in this report or detailed in our other Securities and Exchange
Commission reports and filings.
General
Advanced Micro Devices, Inc. was incorporated under the laws of Delaware on
May 1, 1969. Our mailing address and executive offices are located at One AMD
Place, Sunnyvale, California 94086, and our telephone number is (408) 732-2400.
Unless otherwise indicated, references in this report to "AMD," "we" and "us"
include our subsidiaries.
We are a semiconductor manufacturer with manufacturing facilities in the
United States, Europe and Asia and sales offices throughout the world. Our
products include a wide variety of industry-standard digital integrated
circuits (ICs) that are used in many diverse product applications such as
personal computers (PCs), workstations, servers, telecommunications equipment,
data and network communications equipment and consumer electronics.
For financial information about geographic areas and for segment information
with respect to sales, operating results and identifiable assets, refer to the
information set forth in Note 9 of the Consolidated Financial Statements
contained in our 2001 Annual Report to Stockholders.
For a discussion of the risk factors related to our business operations,
please see the "Cautionary Statement Regarding Forward-Looking Statements,"
"Risk Factors" and "Financial Condition" sections set forth in "Management's
Discussion and Analysis of Financial Condition and Results of Operations"
contained in our 2001 Annual Report to Stockholders.
The IC Industry
The IC market has grown dramatically over the past decade, driven primarily
by the demand for electronic business and consumer products. Today, virtually
all electronic products use ICs, including PCs and related peripherals, voice
and data communications and networking products, facsimile and photocopy
machines, home entertainment equipment, industrial control equipment and
automobiles.
2
The market for ICs can be divided into separate markets for digital and
analog devices. We participate in the market for digital ICs. The three types
of digital ICs used in most electronic systems are:
. microprocessors, which are used for control and computing tasks, and
complementary chipset devices;
. memory circuits, which are used to store data and programming
instructions; and
. logic circuits, which are employed to manage the interchange and
manipulation of digital signals.
A discussion of the principal areas of the digital IC market in which we
participate follows.
The Microprocessor Market
The microprocessor market consists of two broad categories, which are based
on the function of the products. A microprocessor that performs computing tasks
is known as the Central Processing Unit (CPU) of a computer system.
Microprocessors used for control applications are often referred to as embedded
processors. AMD participates primarily in the CPU category, which is the
largest category within the microprocessor market.
A CPU processor is an IC, generally consisting of millions of transistors,
that serves as the brain of a computer system such as a PC. The CPU processor
is typically the component most critical to the performance and efficiency of a
PC. The CPU processor controls data flowing through the electronic system and
manipulates data as specified by the hardware and software that controls the
system. In 1981, International Business Machines Corporation (IBM) introduced
its first PC containing a microprocessor based upon the x86 instruction set
developed by Intel Corporation and utilizing the Microsoft Corporation
MS-DOS(R) operating system. As circuit design and large scale integration
process technology have evolved, performance and functionality of each new
generation of x86 microprocessors have increased. The x86 microprocessor market
has been dominated by Intel since IBM's introduction of the PC.
The x86 microprocessor market is characterized by intense competition, short
product life cycles and rapid advances in product design and process
technology. Today, the greatest demand for microprocessors is from PC
manufacturers. With few exceptions, PC manufacturers require x86
microprocessors that are compatible with the Microsoft Windows(R) operating
system. Improvements in the performance characteristics of microprocessors and
decreases in production costs resulting from advances in process technology
have broadened the market for PCs and, as a result, increased the demand for
microprocessors.
The market for PC original equipment manufacturers (OEMs) is highly
competitive. Most PC suppliers have evolved from fully integrated manufacturers
with proprietary system designs to vendors focused on building brand
recognition and distribution capabilities. Almost all of these suppliers now
rely on Intel or on third-party manufacturers for the major subsystems of their
PCs, such as the motherboard and chipsets. These suppliers are also
increasingly outsourcing the design and manufacture of complete systems. The
third-party manufacturers of these subsystems, based primarily in Asia, are
focused on providing PCs, motherboards and complementary chipset devices that
incorporate the latest trends in features and performance at low prices.
Increasingly, these third-party manufacturers are also supplying fully
configured PC systems through alternative distribution channels.
Embedded processors are also an important part of the microprocessor market.
Embedded processors are general purpose devices used to carry out a single
application with limited user interface and programmability. A system designed
around an embedded processor usually cannot be programmed by an end user
because the system is preprogrammed to execute a specific task. Key markets for
embedded processors include telecommunications, networking, office automation,
storage, automotive applications and industrial control.
The Memory Market
Memory ICs store data and instructions and are characterized as either
volatile or non-volatile. Volatile devices lose their stored information after
electrical power is shut off while non-volatile devices retain their
3
stored information. The three most significant categories of semiconductor
memory devices are (1) Dynamic Random Access Memory (DRAM) and (2) Static
Random Access Memory (SRAM), both of which are volatile memories, and (3)
non-volatile memory, which includes Flash memory, Read-Only Memory (ROM),
Erasable Programmable Read-Only Memory (EPROM), and Electrically Erasable
Programmable Read-Only Memory (EEPROM) devices.
DRAM provides large capacity main memory, and SRAM provides specialized
high-speed memory. We do not produce any DRAM products, which make up the
largest part of the memory market, or SRAM products.
AMD produces Flash memory devices and EPROM devices. Flash and other
non-volatile memory devices are used in applications in which data must be
retained after power is turned off. Several factors have contributed to an
increasing demand for memory devices in recent years, including the:
. expanding unit sales of PCs in the business and consumer markets;
. increasing use and functionality of cellular phones;
. increasing use of PCs to perform memory-intensive graphics and multimedia
functions;
. volume of memory required to support faster microprocessors;
. proliferation of increasingly complex PC software; and
. increasing performance requirements of workstations, servers and
networking and telecommunications equipment.
Flash memory devices are being utilized for an expanding range of uses.
Flash memory devices have a size and cost advantage over EEPROM devices, which
utilize a larger, more expensive memory cell. Flash memory devices also provide
greater flexibility and ease of use when compared to other non-volatile memory
devices, such as ROM and EPROM, because Flash memory devices can be
electrically rewritten to update parameters or system software; ROM cannot be
rewritten and EPROM requires information to be erased using ultraviolet light
before it can be rewritten. Flash memory devices are used to store control
programs and system-critical data in communication devices such as cellular
telephones and routers, which are devices used to transfer data between local
area networks. Flash memory devices are also used in PC cards, which are
inserted into notebook and subnotebook computers or personal digital assistants
to provide added data storage.
The Logic Market
Logic devices consist of structurally interconnected groupings of simple
logical "AND" and logical "OR" functions, commonly described as "gates."
Typically, complex combinations of individual gates are required to implement
the specialized logic functions required for system applications. The greater
the number of gates on a logic device, the higher that logic device's density
and, in general, device cost (for a particular process and architecture). Logic
devices are generally grouped into five families of products (from lowest
density to highest density):
. standard logic devices;
. programmable logic devices (PLDs);
. conventional gate-arrays;
. standard cells; and
. full custom ICs.
Conventional gate-arrays, standard cells and full-custom ICs are often referred
to as application-specific ICs (ASICs).
4
Many manufacturers of electronic systems are striving to develop new and
increasingly complex products to address rapidly evolving market opportunities.
Achievement of this goal often precludes the use of standard logic ICs and
ASICs. Standard logic ICs generally perform simple functions and cannot be
customized, limiting a manufacturer's ability to adequately tailor an
end-product system. Although ASICs can be manufactured to perform customized
functions, they generally involve relatively high initial design, engineering
and manufacturing costs and significant design risks, and may increase an
end-product's time to market. As a result, ASICs are generally limited to
high-volume products and products for which time to market may be less critical.
A growing category of the full custom IC market is Application Specific
Standard Products (ASSPs). In this category, a full custom design, such as an
Ethernet controller, is used to implement a particular function and is sold to
multiple customers. Because the market requirements for these products have
become increasingly standard, they can achieve the functional advantages of
full custom design with the time to market advantages of a standard product.
Almost all of our networking products are a part of the ASSP category.
Unlike ASICs and standard logic ICs, PLDs are standard products purchased by
system manufacturers in an unprogrammed or blank state. Each system
manufacturer may then program the PLDs to perform a variety of specific logic
functions. Certain PLDs are reprogrammable. Compared to standard logic ICs and
ASICs, PLDs allow system designers to design and implement custom logic more
quickly.
On June 15, 1999, we sold Vantis Corporation, our PLD subsidiary, to Lattice
Semiconductor Corporation. We now function as a foundry to Vantis and plan to
continue to provide services to it through October 2002.
Product Segments
In 2001, we participated in all three technology areas within the digital IC
market--microprocessors, memory circuits and logic circuits--through our Core
Products and Foundry Services segments. Our Core Products segment includes our
PC processors, memory products and other IC products. In 2001, PC processors
included our seventh-generation microprocessors, the AMD Athlon(TM) and AMD
Duron(TM) microprocessors, and our sixth-generation microprocessors. Memory
products included Flash memory devices and EPROM devices. Other IC products
included embedded processors, platform products, which primarily consist of
chipsets, and networking products. Our Foundry Services segment consisted of
service fees from Legerity, Inc., our former voice communication products
subsidiary, and Vantis.
Core Products
Our Core Products segment ($3.8 billion, or 97 percent, of our 2001 net
sales) includes PC processor, memory and other IC products.
PC Processors
In 2001, our most significant microprocessor product sales were from the AMD
Athlon and AMD Duron microprocessors, our seventh-generation microprocessors.
We based AMD Athlon and AMD Duron microprocessors on superscalar RISC
architecture and designed them to be compatible with operating system software
such as Windows XP, Windows 2000, Windows NT(R), Windows 98 (and Windows
predecessor operating systems), Linux, NetWare(R) and UNIX.
We introduced the AMD Athlon XP processor for high-performance desktop
computers in October 2001. The AMD Athlon XP processor features QuantiSpeed(TM)
architecture and 3DNow!(TM) Professional technology. We also announced plans to
drive an initiative to develop a reliable processor performance metric.
Historically, x86 microprocessors have improved both instructions (work) per
clock and frequency compared to older generations. However, this is not true
with some processors today. Therefore, megahertz cannot be solely relied upon
as a measure of system performance. We therefore identify the AMD Athlon XP
processor using model numbers, as opposed to clock speed in megahertz.
5
Maintaining PC processor sales levels in 2002 depends on a continuing
successful technology transition in our manufacturing facility located in
Dresden, Germany (Dresden Fab 30), our ability to maintain average selling
prices for our seventh-generation microprocessors, continuing growth in unit
shipments of our PC processors, and increasing market acceptance of the newest
versions of the AMD Athlon and AMD Duron microprocessors.
We plan to continue to make significant capital expenditures to support our
microprocessor and Flash memory products both in the near and long term. Our
ability to increase microprocessor product revenues and benefit fully from the
substantial investments we have made and continue to make related to
microprocessors, depends upon the continuing success of our seventh-generation
and future generations of microprocessors, beginning with the eighth-generation
family of microprocessors code-named "Hammer," that we currently plan to
introduce at the end of 2002. The Hammer microprocessors will be our first PC
processors capable of 64-bit operation and are being designed to deliver
leading-edge performance on both the 64-bit software used by high-end
workstations and servers and the 32-bit software used by the majority of
desktop users.
The microprocessor market is characterized by short product life cycles and
migration to ever-higher performance microprocessors. To compete successfully
against Intel in this market, we must transition to new process technologies at
a fast pace and offer higher performance microprocessors in significantly
greater volumes. We also must achieve yield and volume goals while producing
these higher performance microprocessors in order to offer these products at
competitive prices.
Intel has dominated the market for microprocessors used in PCs for many
years. As a result, Intel has been able to control x86 microprocessor and PC
system standards and dictate the type of products the market requires of
Intel's competitors. In addition, the financial strength of Intel allows it to
market its products aggressively, target our customers and our channel partners
with special incentives and discipline customers who do business with us. These
aggressive activities can result in lower average selling prices for us and
adversely affect our margins and profitability. Intel also exerts substantial
influence over PC manufacturers and their channels of distribution through the
"Intel Inside" brand and other marketing programs. As long as Intel remains in
this dominant position, we may be materially and adversely affected by its:
. pricing and allocation strategies;
. product mix and introduction schedules;
. product bundling, marketing and merchandising strategies;
. control over industry standards, PC manufacturers and other PC industry
participants, including motherboard, chipset and basic input/output system
(BIOS) suppliers; and
. user brand loyalty.
We expect Intel to maintain its dominant position in the marketplace as well as
to continue to invest heavily in research and development, new manufacturing
facilities and other technology companies.
Intel also dominates the PC system platform. As a result, PC OEMs are highly
dependent on Intel, less innovative on their own and, to a large extent,
distributors of Intel technology. In marketing our microprocessors to these
OEMs and dealers, we depend on companies other than Intel for the design and
manufacture of core-logic chipsets, graphics chips, motherboards, BIOS software
and other components. In recent years, many of these third-party designers and
manufacturers have lost significant market share or exited the business. In
addition, these companies produce chipsets, motherboards, BIOS software and
other components to support each new generation of Intel's microprocessors, and
Intel has significant leverage over their business opportunities.
To compete with Intel in the microprocessor market in the future, we intend
to continue to form close relationships with third-party designers and
manufacturers of chipsets, motherboards, graphics chips, BIOS software and
other components. Similarly, we intend to expand our chipset and system design
capabilities and to offer OEMs licensed system designs incorporating our
processors and companion products. We cannot be certain, however, that our
efforts will be successful.
6
We do not currently plan to develop microprocessors that are bus interface
protocol compatible with Intel microprocessors because our patent cross-license
agreement with Intel does not extend to microprocessors that are bus interface
protocol compatible with Intel's sixth and subsequent generation processors.
Thus, the AMD Athlon and AMD Duron microprocessors are not designed to function
with motherboards and chipsets designed to work with Intel microprocessors. The
same will be true of our Hammer family microprocessors. Accordingly, our
ability to compete with Intel in the market for seventh-generation and
eighth-generation microprocessors will depend on our ability to ensure that the
microprocessors can be used in PC platforms designed to support our
microprocessors or that platforms are available that support both Intel
processors and our microprocessors.
Memory Products
Flash Memory Devices. Our Flash memory devices are used in cellular
telephones, networking equipment and other applications that require memory to
be non-volatile and electrically rewritten. The ability of Flash memory devices
to be electrically rewritten provides greater flexibility and ease of use when
compared to EPROMs and other similar integrated circuits that do not share this
feature.
Communications companies use Flash memory devices in cellular telephones and
related equipment to enable users to add and modify frequently called numbers
and to allow manufacturers to preprogram firmware and other information. In
networking applications, Flash memory devices are used in hubs, switches and
routers to enable systems to store firmware and reprogrammed Internet addresses
and other routing information. Use of Flash memory devices is proliferating
into a variety of other applications, such as set-top boxes, automotive control
systems, personal digital assistants, digital cameras and other consumer
electronic items. However, we expect competition in the market for Flash memory
devices to increase in 2002 and beyond as existing manufacturers introduce new
products and industry-wide production capacity increases.
In 2001, most of our Flash memory devices were produced in Japan through
Fujitsu AMD Semiconductor Limited (FASL), our joint venture with Fujitsu
Limited, with additional devices produced under FASL's foundry arrangements.
EPROM Devices. EPROMs represent an older generation of erasable,
programmable read-only memory technology, which is used primarily in the
electronic equipment industry. These devices are used in cellular telephones,
wireless base stations, telecommunication switching equipment, automotive
applications, PC hard disk drives, printer controllers, industrial machine
controls and numerous other types of electronic equipment to store firmware,
which controls the equipment's operation. EPROMs are generally preferred over
more expensive Flash memory devices in applications where end users do not need
to reprogram the information stored on the IC. We believe the market for
EPROMs, which is significantly smaller than the market for Flash memory
devices, will continue to decline as EPROMs are replaced in various
applications by Flash memory devices.
Other ICs
Embedded Processors. Our embedded processors are x86 software compatible
general purpose processors designed specifically for embedded applications. Our
16-bit family of E86 embedded processors are built around the C186/C188
processor with additional integrated features such as additional memory, serial
ports, high-level data link control channels or universal serial bus ports. Our
32-bit E86 family of embedded processors includes the AMD-K6(R)-2E+,
AMD-K6-IIIE+ and Am486(R) discrete processors as well as the Elan(TM)SC400 and
ElanSC520 fully integrated processors. Our Elan processors integrate the PC AT
peripheral set on chip to serve small form factor applications.
Platform Products. Our platform products include chipsets and motherboard
reference design kits designed to support AMD seventh-generation
microprocessors for use in PCs. Since the AMD Athlon, AMD Duron and Hammer
family microprocessors are not designed to function with chipsets and
motherboards designed to work with Intel microprocessors, we must develop
compatible platform products. We license the
7
design interface specifications for these products to third-party manufacturers
to facilitate the sale of our microprocessors. It is possible that from time to
time a third-party manufacturer will be unable to make chipset products
available to the market at the same time our microprocessor products are
introduced. Since the lack of availability of these third-party chipsets could
impact our ability to sell our microprocessors, we manufacture a quantity of
chipsets within our own fabrication facilities or our authorized foundries on a
limited basis. We are then able to have a supply of products available for
sale, should the need exist, until they are available from the third-party
manufacturers.
Networking Products. Our networking products include logic devices that are
used in the data communication and networking industry to establish and manage
connectivity.
Our product portfolio encompasses the following local area network (LAN)
products:
. home networking controllers and physical layer products;
. Ethernet controllers supporting the enterprise and small business
networking areas;
. Ethernet physical layer and repeater products which are used in enterprise
and small business systems solutions; and
. Ethernet physical layer and switch products which are used in enterprise,
small business and telecommunication systems.
Foundry Services
Our Foundry Services segment ($98 million, or 3 percent of our 2001 net
sales) includes fees for services provided to Vantis and Legerity. We will no
longer function as a foundry to Legerity after June 2002, in connection with
the closure of Fabs 14 and 15 as detailed below under "Manufacturing
Facilities." We plan to continue to provide foundry services to Vantis through
October 2002.
Acquisition of Alchemy Semiconductor
On February 19, 2002, we acquired Alchemy Semiconductor, Inc., a privately
held company that designs, develops and markets low power, high performance
microprocessors for personal connectivity devices such as personal digital
assistants, web tablets, and portable and wired Internet access devices and
gateways. Employees of Alchemy will be part of our new Personal Connectivity
Solutions group, which will be dedicated to delivering connectivity solutions
for the non-PC devices listed above.
Research and Development; Manufacturing Technology
Our expenses for research and development were $651 million in 2001, $642
million in 2000 and $636 million in 1999. These expenses represented 17 percent
of net sales in 2001, 14 percent of net sales in 2000 and 22 percent of net
sales in 1999.
Our research and development expenses are charged to operating expenses as
they are incurred. Most of our research and development personnel are
integrated into our engineering staff.
Manufacturing technology is the key determinant in the improvement of most
semiconductor products. Each new generation of process technology has resulted
in products with greater performance produced at lower cost. We continue to
make significant infrastructure investments to enable us to continue to achieve
high volume, high reliability and low cost production using leading edge
process technology.
Our efforts concerning process technologies are focused in two major areas:
logic technology used by our microprocessors and embedded processors and
non-volatile memory technology used by Flash memory products. Our goals are to
improve product performance, increase manufacturing volumes and reduce unit
costs.
8
In order to remain competitive, we must continue to make substantial
investments in the improvement of our process technologies. In particular, we
have made and continue to make significant research and development investments
in the technologies and equipment used to fabricate our microprocessor products
and our Flash memory devices. Portions of these investments might not be fully
recovered if we fail to continue to gain market acceptance or if the market for
our microprocessor or Flash memory products should significantly deteriorate.
In addition, if we are unable to remain competitive with respect to process
technology, we will be materially and adversely affected.
Competition
The IC industry is intensely competitive. Products compete on performance,
quality, reliability, price, adherence to industry standards, software and
hardware compatibility, marketing and distribution capability, brand
recognition and availability. After a product is introduced, costs and average
selling prices normally decrease over time as production efficiency improves,
competitors enter the market and successive generations of products are
developed and introduced for sale. Technological advances in the industry
result in frequent product introductions, regular price reductions, short
product life cycles and increased product capabilities that may result in
significant performance improvements.
In each area of the digital IC market in which we participate, we face
competition from different companies. With respect to microprocessors, Intel
holds a dominant market position. With respect to Flash memory products, our
principal competitors are Intel, STMicroelectronics N.V., Sharp Electronics
Corporation, Atmel Corporation and Fujitsu, our joint venture partner in FASL.
Manufacturing Facilities
Our current IC manufacturing facilities are described in the chart set forth
below:
Wafer Approximate
Size Production Clean Room
(Diameter Technology (Square
Facility Location in Inches) (in Microns) Footage)
- ----------------- ---------- ------------ -----------
Austin, Texas
Fab 25.................................. 8 0.18 120,000
Fabs 14 and 15.......................... 6 0.5 42,000
Aizu-Wakamatsu, Japan
FASL JV1/(1)/........................... 8 0.35 70,000
FASL JV2/(1)/........................... 8 0.25 & 0.35 91,000
FASL JV3/(1)/........................... 8 0.17 118,000
Dresden, Germany
Fab 30.................................. 8 0.18 115,100
- --------
/(1)/ We own 49.992 percent of FASL. Fujitsu owns 50.008 percent of FASL.
In connection with a restructuring plan announced in September 2001, AMD
will close Fabs 14 and 15 at the end of the second quarter of 2002.
The FASL JV3 building and clean room were completed and released to
production with volume revenue shipments beginning in the fourth quarter of
2001.
We also have foundry arrangements for the production of our products by
third parties.
Research and development are conducted at our Submicron Development Center,
a 42,000 square foot facility located in Sunnyvale, California, Fab 25 and
Dresden Fab 30.
9
Our current assembly and test facilities are described in the chart set
forth below:
Approximate
Assembly & Test
Facility Location Square Footage Activity
----------------- --------------- ---------------
Penang, Malaysia....................... 377,000 Assembly & Test
Bangkok, Thailand...................... 78,000 Assembly & Test
Singapore.............................. 162,000 Test
Suzhou, China.......................... 30,250 Assembly & Test
As set forth above, nearly all product assembly and final testing of our
products are performed at our manufacturing facilities in Penang, Malaysia;
Bangkok, Thailand; Suzhou, China; and Singapore; or by subcontractors in the
United States and Asia. We also depend on foreign foundry suppliers and joint
ventures for the manufacture of a portion of our finished silicon wafers and
have international sales operations. The political and economic risks
associated with our manufacturing facilities and other operations in foreign
countries include:
. expropriation;
. changes in a specific country's or region's political or economic
conditions;
. trade protection measures and import or export licensing requirements;
. difficulty in protecting our intellectual property;
. changes in foreign currency exchange rates and currency controls;
. changes in freight and interest rates;
. disruption in air transportation between the United States and our
overseas facilities; and
. loss or modification of exemptions for taxes and tariffs.
Certain Material Agreements. Descriptions of certain material contractual
relationships we have relating to FASL, Dresden Fab 30, Motorola and UMC are
set forth below:
FASL. In 1993, we formed FASL, a joint venture with Fujitsu, for the
development and manufacture of non-volatile memory devices. FASL operates
advanced IC manufacturing facilities in Aizu-Wakamatsu, Japan (FASL JV1, FASL
JV2 and FASL JV3), for the production of Flash memory devices, which are sold
to us and Fujitsu. FASL is continuing the facilitization of FASL JV2 and FASL
JV3.
We expect FASL JV2 and FASL JV3, including equipment, to cost approximately
$2.4 billion when fully equipped. As of December 30, 2001, approximately $1.5
billion of these costs had been funded by cash generated from FASL operations.
However, to the extent that additional funds are required for the full
facilitization of FASL JV2 and FASL JV3, we will be required to contribute cash
or guarantee third-party loans in proportion to our 49.992 percent interest in
FASL, up to 25 billion yen ($192 million). As of December 30, 2001, we had
$148 million in loan guarantees outstanding with respect to FASL third-party
loans. These costs are incurred in Japanese yen and are, therefore, subject to
change due to foreign exchange rate fluctuations. On December 30, 2001, the
exchange rate was 128.02 yen to one U.S. dollar, the rate we used to translate
the amounts denominated in yen into U.S. dollars.
In 2000, FASL further expanded its production capacity through a foundry
arrangement with Fujitsu Microelectronics, Inc. (FMI), a wholly owned
subsidiary of Fujitsu Limited. In connection with FMI equipping its wafer
fabrication facility in Gresham, Oregon (the Gresham Facility) to produce flash
memory devices for sale to FASL, we agreed to guarantee the repayment of up to
$125 million of Fujitsu's obligations as a co-signer with FMI under its global
multicurrency revolving credit facility (the Credit Facility) with a
third-party bank (the Guarantee). On November 30, 2001, Fujitsu announced that
it was closing the Gresham Facility, due to the downturn of the flash memory
market. To date, we have not received notice from Fujitsu that FMI has defaulted
10
on any payment due under the Credit Facility. Furthermore, subsequent to year
end, we were informed that amounts borrowed by FMI under the Credit Facility do
not become due until the end of March 2002. Accordingly, under the terms of the
Guarantee, we are not at this time, and were not at December 30, 2001,
obligated to make any payments to Fujitsu. However, subsequent to year end,
Fujitsu requested that we pay the entire $125 million under the Guarantee.
Although we disagree with Fujitsu as to the amount, if any, of our obligations
under the Guarantee, Fujitsu has indicated its belief that we are obligated to
pay the full $125 million.
In connection with FASL, AMD and Fujitsu have entered into various joint
development, cross-license and investment arrangements. Pursuant to these
agreements, the companies are providing their product designs and process and
manufacturing technologies to FASL. In addition, both companies are
collaborating in developing manufacturing processes and designing Flash memory
devices for FASL. The right of each company to use the licensed intellectual
property of the other with respect to certain products is limited both in scope
and geographic areas. For instance, AMD and Fujitsu have cross-licensed their
respective intellectual property to produce stand-alone Flash memory devices
with geometrics of 0.5 micron or smaller within the joint venture. Furthermore,
our ability to sell Flash memory products incorporating Fujitsu intellectual
property, whether or not produced by FASL, is also limited in Japan. Fujitsu is
likewise limited in its ability to sell Flash memory devices incorporating our
intellectual property, whether or not produced by FASL, in the United States.
While the FASL joint venture has been successful to date, there can be no
assurance that Fujitsu and AMD will elect to continue the joint venture in its
present form or at all.
Dresden Fab 30. AMD Saxony Manufacturing GmbH (AMD Saxony), an indirect
wholly owned German subsidiary of AMD, continues to facilitize Dresden Fab 30,
which began production in the second quarter of 2000. AMD, the Federal Republic
of Germany, the State of Saxony and a consortium of banks are providing credit
support for the project. We currently estimate construction and facilitization
costs of Dresden Fab 30 will be $2.5 billion when fully equipped by the end of
2003. As of December 30, 2001, we had invested $1.8 billion.
In March 1997, AMD Saxony entered into a loan agreement and other related
agreements (the Dresden Loan Agreements) with a consortium of banks led by
Dresdner Bank AG in order to finance the project. Because most of the amounts
under the Dresden Loan Agreements are denominated in deutsche marks, the dollar
amounts set forth below are subject to change based on applicable conversion
rates. We used the exchange rate as of December 30, 2001, which was
approximately 2.17 deutsche marks to one U.S. dollar, to value the amounts
denominated in deutsche marks. The Dresden Loan Agreements provide for the
funding of the construction and facilitization of Dresden Fab 30. The funding
consists of:
. equity, subordinated loans and loan guarantees from AMD;
. loans from a consortium of banks; and
. grants, subsidies and loan guarantees from the Federal Republic of Germany
and the State of Saxony.
The Dresden Loan Agreements require that we partially fund Dresden Fab 30
project costs in the form of subordinated loans to, or equity investments in,
AMD Saxony. In accordance with the terms of the Dresden Loan Agreements, as of
December 30, 2001, we have invested $334 million in the form of subordinated
loans to and equity investments in AMD Saxony. In addition to support from us,
the consortium of banks referred to above has made available up to $692 million
in loans to AMD Saxony to help fund Dresden Fab 30 project costs. AMD Saxony
had $602 million of such loans outstanding through December 30, 2001.
Finally, the Federal Republic of Germany and the State of Saxony are
supporting the Dresden Fab 30 project, in accordance with the Dresden Loan
Agreements, in the form of:
. guarantees equal to the lesser of 65 percent of AMD Saxony bank debt or
$692 million;
. capital investment grants and allowances totaling $286 million; and
11
. interest subsidies totaling $142 million.
Of these amounts, AMD Saxony had received approximately $284 million in
capital investment grants and allowances and $64 million in interest subsidies
through December 30, 2001. The grants and subsidies are subject to conditions,
including meeting specified levels of employment by December 2001 and
maintaining those levels until June 2007. Noncompliance with the conditions of
the grants and subsidies could result in the forfeiture of all or a portion of
the future amounts to be received, as well as the repayment of all or a portion
of amounts received to date. As of December 30, 2001, we were in compliance
with all of the conditions of the grants and subsidies.
In February 2001, we amended the Dresden Loan Agreements to reflect new
capacity and increased capital expenditure plans for Dresden Fab 30. Under the
February 2001 amendments, we agreed to increase and extend our guaranty of AMD
Saxony's obligations and to make available to AMD Saxony revolving loans of up
to $500 million. We expanded our obligation to reimburse AMD Saxony for the
cost of producing wafers for us, and we also agreed to cancel the cost overrun
facility made available by the banks. Under the February 2001 amendments, we
were released from financial covenants limiting capital expenditures and
requiring AMD Saxony to achieve capacity and production cost targets by the end
of 2001. As of December 30, 2001, $59 million of the revolving loans were
outstanding. The revolving loan amounts are denominated in European Union euros
and are, therefore, subject to change due to foreign exchange rate fluctuation.
We used the exchange rate on December 30, 2001, 1.11 euros to one U.S. dollar,
to translate the amount of the revolving loans.
The Dresden Loan Agreements, as amended, also require that we:
. provide interim funding to AMD Saxony if either the remaining capital
investment allowances or the remaining interest subsidies are delayed,
such funding to be repaid to AMD as AMD Saxony receives the grants or
subsidies from the state of Saxony;
. fund shortfalls in government subsidies resulting from any default under
the subsidy agreements caused by AMD Saxony or its affiliates; and
. guarantee up to 35 percent of AMD Saxony's obligations under the Dresden
Loan Agreements, which guarantee must not be less than $100 million or
more than $277 million, until the bank loans are repaid in full.
AMD Saxony would be in default under the Dresden Loan Agreements if we, AMD
Saxony or AMD Saxony Holding GmbH (AMD Holding), the parent company of AMD
Saxony and a wholly owned subsidiary of AMD, fail to comply with certain
obligations thereunder or upon the occurrence of certain events including:
. material variances from the approved plans and specifications;
. our failure to fund equity contributions or shareholder loans or otherwise
comply with our obligations relating to the Dresden Loan Agreements;
. the sale of shares in AMD Saxony or AMD Holding;
. the failure to pay material obligations;
. the occurrence of a material adverse change or filings or proceedings in
bankruptcy or insolvency with respect to us, AMD Saxony or AMD Holding; and
. the occurrence of default under our Loan and Security Agreement (the Loan
Agreement) with a consortium of banks led by a domestic financial
institution, effective on July 13, 1999.
Generally, any default with respect to borrowings made or guaranteed by AMD
that results in recourse to us of more than $2.5 million and is not cured by
us, would result in a cross-default under the Dresden Loan Agreements and the
Loan Agreement. As of December 30, 2001, we were in compliance with all
conditions of the Dresden Loan Agreements.
12
In the event we are unable to meet our obligations to AMD Saxony as required
under the Dresden Loan Agreements, we will be in default under the Dresden Loan
Agreements and the Loan Agreement, which default would permit acceleration of
certain indebtedness, which could have a material adverse effect on us. We
cannot assure that we will be able to obtain the funds necessary to fulfill
these obligations. Any such failure would have a material adverse effect on us.
We entered into foreign currency hedging transactions for Dresden Fab 30 in
1999, 2000 and 2001 and anticipate entering into additional foreign currency
hedging transactions in 2002 and in future years. We use foreign currency
forward and option contracts to reduce our exposure to currency fluctuations on
our foreign currency exposures in our foreign sales subsidiaries, liabilities
for products purchased from FASL and for foreign currency denominated fixed
asset purchase commitments. The objective of these contracts is to minimize the
impact of foreign currency exchange rate movements on our operating results and
on the cost of capital asset acquisition. Our accounting policy for these
instruments is based on our designation of such instruments as hedging
transactions. We generally do not use derivative financial instruments for
speculative or trading purposes.
Motorola. In 1998, we entered into an alliance with Motorola for the
development of logic and Flash memory process technology. The alliance includes
a technology development and license agreement and a patent cross-license
agreement. Licenses under the agreement may be subject to variable royalty
rates. We are currently working with Motorola to cease our joint process
development efforts in the second half of 2002.
UMC Alliance. On January 31, 2002, we announced an alliance with United
Microelectronics Corporation (UMC) under which UMC and AMD will establish a
joint venture to own and operate a state-of-the-art, 300-mm wafer fabrication
facility in Singapore for high-volume production of PC processors and other
logic products. As part of the alliance, we and UMC will collaborate in the
development of advanced process technologies for semiconductor logic products.
We separately announced a foundry agreement under which UMC will produce PC
processors to augment Dresden Fab 30 production capacity for devices produced
on 130-nanometer and smaller-geometry technology.
Marketing and Sales
Our products are marketed and sold under the AMD trademark. We employ a
direct sales force through our principal facilities in Sunnyvale, California,
and field sales offices throughout the United States and abroad, primarily
Europe and Asia Pacific. We also sell our products through third-party
distributors and independent representatives in both domestic and international
markets pursuant to nonexclusive agreements. The distributors also sell
products manufactured by our competitors. No single distributor or OEM customer
accounted for ten percent or more of our net sales in 2001. In 2000 and 1999,
one of our OEM customers accounted for approximately 11 and 13 percent of net
sales. No distributor accounted for ten percent or more of net sales in 2000 or
1999.
Distributors typically maintain an inventory of our products. Generally, we
sell to distributors under terms allowing the distributors certain rights of
return and price protection on unsold merchandise held by them. The price
protection and return rights we offer to our distributors could materially and
adversely affect us if there is an unexpected significant decline in the price
of our products.
Our international sales operations entail political and economic risks,
including expropriation, currency controls, exchange rate fluctuations, changes
in freight rates and changes in rates and exemptions for taxes and tariffs.
Raw Materials
Certain raw materials we use in the manufacture of our products are
available from a limited number of suppliers. For example, we are dependent on
key chemicals from a limited number of suppliers and rely on a few foreign
companies to supply the majority of certain types of the IC packages we
purchase. Interruption of supply or increased demand in the industry could
cause shortages and price increases in various essential materials. If
13
we were unable to procure certain of these materials, we might have to reduce
our manufacturing operations. Such a reduction could have a material adverse
effect on our business. To date, we have not experienced significant difficulty
in obtaining the raw materials required for our manufacturing operations.
Environmental Regulations
Our business involves the use of hazardous materials. If we fail to comply
with governmental regulations related to the use, storage, handling, discharge
or disposal of toxic, volatile or otherwise hazardous chemicals used in our
manufacturing processes, we may be subject to fines, suspension of production,
alteration of our manufacturing processes or cessation of our operations. Such
regulations could require us to procure expensive remediation equipment or to
incur other expenses to comply with environmental regulations. Any failure to
control the use of, disposal or storage of, or adequately restrict the
discharge of, hazardous substances could subject us to future liabilities and
could have a material adverse effect on our business. Violations of
environmental laws may result in criminal and civil liabilities.
Intellectual Property and Licensing
We have been granted over 4,300 United States patents and have several
thousand patent applications pending in the United States. In certain cases, we
have filed corresponding applications in foreign jurisdictions. We expect to
file future patent applications in both the United States and abroad on
significant inventions, as we deem appropriate.
In May 2001, we signed a 10-year cross-licence agreement with Intel
Corporation. In addition, we have entered into numerous cross-licensing and
technology exchange agreements with other companies under which we both
transfer and receive technology and intellectual property rights. Although we
attempt to protect our intellectual property rights, in the United States and
abroad, through patents, copyrights, trade secrets and other measures, we may
not be able to adequately protect our technology or other intellectual property
or prevent others from independently developing similar technology. Any patent
licensed by us or issued to us could be challenged, invalidated or
circumvented, or rights granted thereunder may not provide a competitive
advantage to us. Further, patent applications that we file may not be issued.
Despite our efforts to protect our rights, others may independently develop
similar products, duplicate our products or design around our patents and other
rights. In addition, it is difficult to cost-effectively monitor compliance
with, and enforce, our intellectual property rights on a worldwide basis.
From time to time, we have been notified that we may be infringing
intellectual property rights of others. If any such claims are asserted against
us, we may seek to obtain a license under the third party's intellectual
property rights. We cannot assure you that all necessary licenses can be
obtained on satisfactory terms, or at all. We could decide, in the alternative,
to resort to litigation to challenge such claims. Such challenges could be
extremely expensive and time-consuming and could have a material and adverse
effect on us. We cannot assure you that litigation related to the intellectual
property rights of us or others will always be avoided or successfully
concluded.
Backlog
We manufacture and market standard lines of products. Consequently, a
significant portion of our sales are made from inventory on a current basis.
Sales are made primarily pursuant to purchase orders for current delivery or
agreements covering purchases over a period of time, which orders or agreements
may be revised or canceled without penalty. Generally, in light of current
industry practice and experience, we do not believe that such agreements
provide meaningful backlog figures or are necessarily indicative of actual
sales for any succeeding period.
Employees
On January 27, 2002, we employed approximately 14,415 employees, none of
whom are represented by collective bargaining arrangements. We believe that our
relationship with our employees is good.
14
Executive Officers of the Registrant
W. J. Sanders III--Mr. Sanders, 65, is our Chairman of the Board and Chief
Executive Officer and has been since he co-founded AMD in 1969. Mr. Sanders
will retire as Chief Executive Officer on April 25, 2002; if re-elected, Mr.
Sanders will serve as Chairman of the Board through December 27, 2003.
Hector de J. Ruiz--Dr. Ruiz, 56, is our President and Chief Operating
Officer. Dr. Ruiz will be appointed our Chief Executive Officer on April 25,
2002. Dr. Ruiz joined AMD in January 2000. Before joining AMD, Dr. Ruiz had
been President of the Semiconductor Products Sector of Motorola, Inc. since
1997. Dr. Ruiz had held various executive positions with Motorola since 1977.
Benjamin M. Anixter--Mr. Anixter, 64, is our Vice President, External
Affairs, and has been since 1987. Mr. Anixter became a corporate officer in
April of 1999. He has held positions with us since 1971.
Robert R. Herb--Mr. Herb, 40, is our Executive Vice President, Chief Sales
and Marketing Officer. Mr. Herb joined AMD in 1983. In 1998, Mr. Herb became an
officer of AMD and was promoted to Senior Vice President and Co-Chief Marketing
Officer. From 1996 until 1998, Mr. Herb served as the Vice President of Group
Strategic Marketing for the Computation Products Group. Before that, he was a
director of marketing for the Personal Computer Products Division.
Walid Maghribi--Mr. Maghribi, 49, was our Senior Vice President and
President of the Memory Group until he resigned on March 1, 2002. Mr. Maghribi
joined us in 1986 and was Group Vice President, Memory Group before being
promoted to Senior Vice President and President of the Memory Group in 2001.
Before joining AMD, Mr. Maghribi was Director of Operations of Seeq Technology,
which he joined in 1982.
Thomas M. McCoy--Mr. McCoy, 51, is our Senior Vice President, General
Counsel and Secretary. Before his appointment as Senior Vice President, Mr.
McCoy held the office of Vice President, General Counsel and Secretary from
1995 to 1998. Before joining AMD, Mr. McCoy was with the law firm of O'Melveny
and Myers where he practiced law, first as an associate and then as a partner,
from 1977 to 1995.
Robert J. Rivet--Mr. Rivet, 47, is our Senior Vice President and Chief
Financial Officer. Mr. Rivet joined us in September 2000. Before joining us, he
had served as Senior Vice President and Director of Finance of the
Semiconductor Products Sector of Motorola since 1997. Mr. Rivet served in a
number of positions in semiconductor operations at Motorola since 1981, after
joining the company in 1976 as a senior financial analyst and senior accountant.
William T. Siegle--Dr. Siegle, 63, is our Senior Vice President, Technology
Operations and Chief Scientist. Dr. Siegle was Group Vice President, Technology
Development Group and Chief Scientist from 1997 until 1998. Before his
appointment as Group Vice President, Dr. Siegle had served as Vice President,
Integrated Technology Department and Chief Scientist since 1990.
Stan Winvick--Mr. Winvick, 62, is our Senior Vice President, Human
Resources. Before his appointment as Senior Vice President in 1991, Mr. Winvick
had served as Vice President, Human Resources since 1980.
Stephen J. Zelencik--Mr. Zelencik, 67, is our Senior Vice President, Market
Development. Before his appointment as Senior Vice President, Market
Development in 1999, Mr. Zelencik served as Senior Vice President and Co-Chief
Marketing Officer. From 1979 until 1998, Mr. Zelencik was Senior Vice President
and Chief Marketing Executive.
15
ITEM 2. PROPERTIES
Our principal engineering, manufacturing, warehouse and administrative
facilities comprise approximately 5.1 million square feet and are located in
Sunnyvale, California; Austin, Texas; and Dresden, Germany. Over 3.1 million
square feet of this space is in buildings we own.
We have an operating lease on property containing two buildings with an
aggregate of approximately 364,000 square feet, located on 45.6 acres of land
in Sunnyvale, California (One AMD Place). This operating lease ends in December
2018. In 2000, we renewed a lease agreement for approximately 175,000 square
feet located adjacent to One AMD Place (known as AMD Square) to be used by the
product groups as engineering offices and laboratory facilities.
We also own or lease facilities containing approximately 1.2 million square
feet for our operations in Malaysia, Thailand, Singapore and China. We lease
approximately 15 acres of land in Suzhou, China for our assembly and test
facility. We acquired approximately 115 acres of land in Dresden, Germany for
Dresden Fab 30. This property is encumbered by a lien securing borrowings of
AMD Saxony.
We lease 24 sales offices in North America, 11 sales offices in Asia
Pacific, 11 sales offices in Europe and one sales office in South America for
our direct sales force. These offices are located in cities in major
electronics markets where concentrations of our customers are located.
Leases covering our facilities expire over terms of generally one to 20
years. We currently do not anticipate significant difficulty in either
retaining occupancy of any of our facilities through lease renewals prior to
expiration or through month-to-month occupancy, or replacing them with
equivalent facilities.
ITEM 3. LEGAL PROCEEDINGS
1. Environmental Matters. Since 1981, we have discovered, investigated and
begun remediation of three sites where releases from underground chemical tanks
at our facilities in Santa Clara County, California, adversely affected the
groundwater. The chemicals released into the groundwater were commonly in use
in the semiconductor industry in the wafer fabrication process prior to 1979.
At least one of the released chemicals (which we no longer use) has been
identified as a probable carcinogen.
In 1991, we received four Final Site Clean-up Requirements Orders from the
California Regional Water Quality Control Board, San Francisco Bay Region,
relating to the three sites. One of the orders named us as well as TRW
Microwave, Inc. and Philips Semiconductors Corporation. In January 1999, we
entered into a settlement agreement with Philips whereby Philips assumed costs
allocated to us under this order, although we are responsible for these costs
in the event that Philips does not fulfill its obligations under the settlement
agreement. Another of the orders named us as well as National Semiconductor
Corporation. In December 2001, we entered into a settlement agreement with
National pursuant to which National will take the lead for a period of time on
certain groundwater remediation required under that order, but we remain a
responsible party for all purposes under the order and retain specific
responsibilities.
The three sites in Santa Clara County are on the National Priorities List
(Superfund). If we fail to satisfy federal compliance requirements, or
inadequately perform the compliance measures, the government (1) can bring an
action to enforce compliance or (2) can undertake the desired response actions
itself and later bring an action to recover its costs, and penalties, which is
up to three times the costs of clean-up activities, if appropriate. The statute
of limitations has been tolled on the claims of landowners adjacent to the
Santa Clara County Superfund sites for causes of action such as negligence,
nuisance and trespass.
We have computed and recorded the estimated environmental liability in
accordance with applicable accounting rules and have not recorded any potential
insurance recoveries in determining the estimated costs of the cleanup. The
amount of environmental charges to earnings has not been material during any of
the last three fiscal years. We believe that the potential liability, if any,
in excess of amounts already accrued with respect to the foregoing
environmental matters will not have a material adverse effect on us.
16
We received a notice dated October 14, 1998 from the Environmental
Protection Agency (EPA) indicating that the EPA has determined us to be a
potentially responsible party that arranged for disposal of hazardous
substances at a site located in Santa Barbara County, California. We are
currently in settlement discussions with the EPA and believe that any
settlement will not have a material adverse effect on our financial condition
or results of operations.
2. Other Matters. We are a defendant or plaintiff in various other actions
that arose in the normal course of business. In the opinion of management, the
ultimate disposition of these matters will not have a material adverse effect
on our business.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
No matters were submitted to a vote of security holders during the fourth
quarter of the fiscal year covered by this report.
17
PART II
ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS
Our common stock (symbol "AMD") is listed on the New York Stock Exchange.
The information regarding market price range, dividend information and number
of holders of our common stock appearing under the captions, "Supplementary
Financial Data" and "Financial Summary" on pages 47 and 48 of our 2001 Annual
Report to Stockholders is incorporated herein by reference.
During 2001, we did not make any sales of our equity securities which were
not registered under the Securities Act of 1933, as amended.
ITEM 6. SELECTED FINANCIAL DATA
The information regarding selected financial data for the fiscal years 1997
through 2001, under the caption, "Financial Summary" on page 48 of our 2001
Annual Report to Stockholders is incorporated herein by reference.
ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS
The information appearing under the caption, "Management's Discussion and
Analysis of Financial Condition and Results of Operations" on pages 10 through
24 of our 2001 Annual Report to Stockholders is incorporated herein by
reference.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK
The information appearing under the caption, "Quantitative and Qualitative
Disclosure about Market Risk" on pages 18 through 19 of our 2001 Annual Report
to Stockholders is incorporated herein by reference.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Our consolidated financial statements as of December 30, 2001 and December
31, 2000 and for each of the three years in the period ended December 30, 2001,
and the report of independent auditors thereon, and our unaudited quarterly
financial data for the two-year period ended December 30, 2001, appearing on
pages 25 through 46 of our 2001 Annual Report to Stockholders, are incorporated
herein by reference.
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND
FINANCIAL DISCLOSURE
Not applicable.
18
PART III
ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT
The information under the captions, "Item 1--Election of Directors" and
"Section 16(a) Beneficial Ownership Reporting Compliance" in our Proxy
Statement for our Annual Meeting of Stockholders to be held on April 25, 2002
(2002 Proxy Statement) is incorporated herein by reference.
ITEM 11. EXECUTIVE COMPENSATION
The information under the captions, "Directors' Compensation and Benefits,"
"Committees and Meetings of the Board of Directors," "Executive Compensation,"
"Employment Agreements" and "Change in Control Arrangements" in our 2002 Proxy
Statement is incorporated herein by reference.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT
The information under the captions, "Principal Stockholders" and "Security
Ownership of Directors and Executive Officers" in our 2002 Proxy Statement is
incorporated herein by reference.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
The information under the caption, "Certain Relationships and Related
Transactions" in our 2002 Proxy Statement is incorporated herein by reference.
With the exception of the information specifically incorporated by reference
in Part III of this Annual Report on Form 10-K from our 2002 Proxy Statement,
our 2002 Proxy Statement shall not be deemed to be filed as part of this
report. Without limiting the foregoing, the information under the captions,
"Board Compensation Committee Report on Executive Compensation," "Board Audit
Committee Report" and "Performance Graph" in our 2002 Proxy Statement is not
incorporated by reference in this Annual Report on Form 10-K.
19
PART IV
ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES, AND REPORTS ON FORM 8-K
(a)
1. Financial Statements
The financial statements listed in the accompanying Index to Consolidated
Financial Statements and Financial Statement Schedule covered by the Report of
Independent Auditors are filed or incorporated by reference as part of this
Annual Report on Form 10-K. The following is a list of such financial
statements:
Page References
-----------------
2001 Annual
Form Report to
10-K Stockholders
---- ------------
Report of Ernst & Young LLP, Independent Auditors.......... -- 46
Consolidated Statements of Operations for each of the three
years in the period ended December 30, 2001.............. -- 25
Consolidated Balance Sheets as of December 30, 2001 and
December 31, 2000........................................ -- 26
Consolidated Statements of Stockholders' Equity for each of
the three years in the period ended December 30, 2001.... -- 27
Consolidated Statements of Cash Flows for each of the three
years in the period ended December 30, 2001.............. -- 28
Notes to Consolidated Financial Statements................. -- 29-45
2. Financial Statement Schedule
The financial statement schedule listed below is filed as part of this
Annual Report on Form 10-K.
Page References
-----------------
2001 Annual
Form Report to
10-K Stockholders
---- ------------
Schedule for the three years in the period ended December
30, 2001:
Schedule II Valuation and Qualifying Accounts........... F-4 --
All other schedules have been omitted because the required information is
not present or is not present in amounts sufficient to require submission of
the schedules or because the information required is included in the
Consolidated Financial Statements or Notes thereto. With the exception of the
information specifically incorporated by reference into Parts II and IV of this
Annual Report on Form 10-K, the 2001 Annual Report to Stockholders is not to be
deemed filed as part of this report.
3. Exhibits
The exhibits listed in the accompanying Index to Exhibits are filed as part
of, or incorporated by reference into, this Annual Report on Form 10-K. The
following is a list of such Exhibits:
Exhibit
Number Description of Exhibits
- ------ -----------------------
2.1 Agreement and Plan of Merger dated October 20, 1995, between AMD and NexGen, Inc., filed as
Exhibit 2 to AMD's Quarterly Report for the period ended October 1, 1995, and as amended as
Exhibit 2.1 to AMD's Current Report on Form 8-K dated January 17, 1996, is hereby incorporated
by reference.
20
Exhibit
Number Description of Exhibits
- ------ -----------------------
2.2 Amendment No. 2 to the Agreement and Plan of Merger, dated January 11, 1996, between AMD and
NexGen, Inc., filed as Exhibit 2.2 to AMD's Current Report on Form 8-K dated January 17, 1996,
is hereby incorporated by reference.
2.3 Stock Purchase Agreement dated as of April 21, 1999, by and between Lattice Semiconductor
Corporation and AMD, filed as Exhibit 2.3 to AMD's Current Report on Form 8-K dated April 26,
1999, is hereby incorporated by reference.
2.3(a) First Amendment to Stock Purchase Agreement, dated as of June 7, 1999, between AMD and Lattice
Semiconductor Corporation, filed as Exhibit 2.3(a) to AMD's Quarterly Report on Form 10-Q for
the period ended June 27, 1999, is hereby incorporated by reference.
2.3(b) Second Amendment to Stock Purchase Agreement, dated as of June 15, 1999, between AMD and
Lattice Semiconductor Corporation, filed as Exhibit 2.3(b) to AMD's Quarterly Report on
Form 10-Q for the period ended June 27, 1999, is hereby incorporated by reference.
2.4 Reorganization Agreement, dated as of May 21, 2000, by and between AMD and BoldCo, Inc., filed
as Exhibit 2.1 to AMD's Current Report on Form 8-K dated May 21, 2000, is hereby incorporated
by reference.
2.5 Recapitalization Agreement, dated as of May 21, 2000, by and between BraveTwo Acquisition,
L.L.C., AMD and BoldCo, Inc., filed as Exhibit 2.2 to AMD's Current Report on Form 8-K dated
May 21, 2000, is hereby incorporated by reference.
3.1 Certificate of Incorporation, as amended, filed as Exhibit 3.1 to AMD's Amendment No. 1 to its
Annual Report on Form 10-K for the fiscal year ended December 26, 1999, is hereby incorporated
by reference.
3.2 By-Laws, as amended, filed as Exhibit 3.2 to AMD's Annual Report on Form 10-K for the fiscal
year ended December 26, 1999, are hereby incorporated by reference.
3.3 Certificate of Amendment to Restated Certificate of Incorporation dated May 25, 2000, filed as
Exhibit 3.3 to AMD's Quarterly Report on Form 10-Q for the period ended July 2, 2000, is hereby
incorporated by reference.
4.1 Form of AMD 11% Senior Secured Notes due August 1, 2003, filed as Exhibit 4.1 to AMD's
Current Report on Form 8-K dated August 13, 1996, is hereby incorporated by reference.
4.2 Indenture, dated as of August 1, 1996, between AMD and United States Trust Company of New
York, as trustee, filed as Exhibit 4.2 to AMD's Current Report on Form 8-K dated August 13,
1996, is hereby incorporated by reference.
4.2(a) First Supplemental Indenture, dated as of January 13, 1999, between AMD and United States Trust
Company of New York, as trustee, filed as Exhibit 4.2(b) to AMD's Annual Report on Form 10-K
for the fiscal year ended December 27, 1998, is hereby incorporated by reference.
4.2(b) Second Supplemental Indenture, dated as of April 8, 1999, between AMD and United States Trust
Company of New York, as trustee, filed as Exhibit 4.2(c) to AMD's Annual Report on Form 10-K
for the fiscal year ended December 26, 1999, is hereby incorporated by reference.
4.2(c) Third Supplemental Indenture, dated as of July 28, 2000, between AMD and the United States Trust
Company, as trustee, filed as Exhibit 4.2(d) to AMD's Quarterly Report on Form 10-Q for the
period ended October 1, 2000, is hereby incorporated by reference.
21
Exhibit
Number Description of Exhibits
- ------ -----------------------
4.3 Intercreditor and Collateral Agent Agreement, dated as of August 1, 1996, among United States Trust
Company of New York, as trustee, Bank of America NT&SA, as agent for the banks under the
Credit Agreement of July 19, 1996, and IBJ Schroder Bank & Trust Company, filed as Exhibit 4.3
to AMD's Current Report on Form 8-K dated August 13, 1996, is hereby incorporated by
reference.
4.4 Payment, Reimbursement and Indemnity Agreement, dated as of August 1, 1996, between AMD and
IBJ Schroder Bank & Trust Company, filed as Exhibit 4.4 to AMD's Current Report on Form 8-K
dated August 13, 1996, is hereby incorporated by reference.
4.5 Deed of Trust, Assignment, Security Agreement and Financing Statement, dated as of August 1,
1996, among AMD, as grantor, IBJ Schroder Bank & Trust Company, as grantee, and Shelley W.
Austin, as trustee, filed as Exhibit 4.5 to AMD's Current Report on Form 8-K dated August 13,
1996, is hereby incorporated by reference.
4.6 Security Agreement, dated as of August 1, 1996, among AMD and IBJ Schroder Bank & Trust
Company, as agent for United States Trust Company of New York, as trustee, and Bank of
America NT&SA, as agent for banks, filed as Exhibit 4.6 to AMD's Current Report on Form 8-K
dated August 13, 1996, is hereby incorporated by reference.
4.7 Lease, Option to Purchase and Put Option Agreement, dated as of August 1, 1996, between AMD, as
lessor, and AMD Texas Properties, LLC, as lessee, filed as Exhibit 4.7 to AMD's Current Report
on Form 8-K dated August 13, 1996, is hereby incorporated by reference.
4.8 Reciprocal Easement Agreement, dated as of August 1, 1996, between AMD and AMD Texas
Properties, LLC, filed as Exhibit 4.8 to AMD's Current Report on Form 8-K dated August 13,
1996, is hereby incorporated by reference.
4.9 Sublease Agreement, dated as of August 1, 1996, between AMD, as sublessee, and AMD Texas
Properties, LLC, as sublessor, filed as Exhibit 4.9 to AMD's Current Report on Form 8-K dated
August 13, 1996, is hereby incorporated by reference.
4.10 Indenture, dated as of May 8, 1998, by and between AMD and The Bank of New York, as trustee,
filed as Exhibit 4.1 to AMD's Current Report on Form 8-K dated May 8, 1998, is hereby
incorporated by reference.
4.11 Officers' Certificate, dated as of May 8, 1998, filed as Exhibit 4.2 to AMD's Current Report on
Form 8-K dated May 8, 1998, is hereby incorporated by reference.
4.12 Form of 6% Convertible Subordinated Note due 2005, filed as Exhibit 4.3 to AMD's Current Report
on Form 8-K dated May 8, 1998, is hereby incorporated by reference.
4.13 AMD hereby agrees to file on request of the Commission a copy of all instruments not otherwise
filed with respect to AMD's long-term debt or any of its subsidiaries for which the total amount of
securities authorized under such instruments does not exceed 10 percent of the total assets of
AMD and its subsidiaries on a consolidated basis.
4.14 Indenture, dated as of January 29, 2002, between AMD and The Bank of New York.
4.15 Form of AMD 4.75% Convertible Senior Debentures Due 2022.
4.16 Registration Rights Agreement, dated as of January 29, 2002, by and among AMD, Credit Suisse
First Boston Corporation and Salomon Smith Barney Inc.
*10.1 AMD 1982 Stock Option Plan, as amended, filed as Exhibit 10.1 to AMD's Annual Report on
Form 10-K for the fiscal year ended December 26, 1993, is hereby incorporated by reference.
22
Exhibit
Number Description of Exhibits
- ------ -----------------------
*10.2 AMD 1986 Stock Option Plan, as amended, filed as Exhibit 10.2 to AMD's Annual Report on
Form 10-K for the fiscal year ended December 26, 1993, is hereby incorporated by reference.
*10.3 AMD 1992 Stock Incentive Plan, as amended, filed as Exhibit 10.3 to AMD's Annual Report on
Form 10-K for the fiscal year ended December 31, 2000, is hereby incorporated by reference.
*10.4 AMD 1980 Stock Appreciation Rights Plan, as amended, filed as Exhibit 10.4 to AMD's Annual
Report on Form 10-K for the fiscal year ended December 26, 1993, is hereby incorporated by
reference.
*10.5 AMD 1986 Stock Appreciation Rights Plan, as amended, filed as Exhibit 10.5 to the Company's
Annual Report on Form 10-K for the fiscal year ended December 26, 1993, is hereby incorporated
by reference.
*10.6 Forms of Stock Option Agreements, filed as Exhibit 10.8 to AMD's Annual Report on Form 10-K
for the fiscal year ended December 29, 1991, are hereby incorporated by reference.
*10.7 Form of Limited Stock Appreciation Rights Agreement, filed as Exhibit 4.11 to AMD's Registration
Statement on Form S-8 (No. 33-26266), is hereby incorporated by reference.
*10.8 AMD 1987 Restricted Stock Award Plan, as amended, filed as Exhibit 10.10 to AMD's Annual
Report on Form 10-K for the fiscal year ended December 26, 1993, is hereby incorporated by
reference.
*10.9 Forms of Restricted Stock Agreements, filed as Exhibit 10.11 to AMD's Annual Report on
Form 10-K for the fiscal year ended December 29, 1991, are hereby incorporated by reference.
*10.10 Resolution of Board of Directors on September 9, 1981, regarding acceleration of vesting of all
outstanding stock options and associated limited stock appreciation rights held by officers under
certain circumstances, filed as Exhibit 10.10 to AMD's Annual Report on Form 10-K for the fiscal
year ended March 31, 1985, is hereby incorporated by reference.
*10.11 Amended and Restated Employment Agreement, dated as of November 3, 2000, between AMD and
W. J. Sanders III, filed as Exhibit 10.12 to AMD's Annual Report on Form 10-K for the fiscal year
ended December 31, 2000, is hereby incorporated by reference.
*10.12 AMD 2000 Stock Incentive Plan, filed as Exhibit 10.13 to AMD's Annual Report on Form 10-K for
the fiscal year ended December 31, 2000, is hereby incorporated by reference.
*10.13 AMD's U.S. Stock Option Program for options granted after April 25, 2000, filed as Exhibit 10.14 to
AMD's Annual Report on Form 10-K for the fiscal year ended December 31, 2000, is hereby
incorporated by reference.
*10.14 Vice President Incentive Plan, filed as Exhibit 10.15 to AMD's Annual Report on Form 10-K for the
fiscal year ended December 31, 2000, is hereby incorporated by reference.
*10.15 AMD Executive Incentive Plan, filed as Exhibit 10.14(b) to AMD's Quarterly Report on Form 10-Q
for the period ended June 30, 1996, is hereby incorporated by reference.
*10.16 Form of Bonus Deferral Agreement, filed as Exhibit 10.12 to AMD's Annual Report on Form 10-K
for the fiscal year ended March 30, 1986, is hereby incorporated by reference.
*10.17 Form of Executive Deferral Agreement, filed as Exhibit 10.17 to AMD's Annual Report on
Form 10-K for the fiscal year ended December 31, 1989, is hereby incorporated by reference.
*10.18 Director Deferral Agreement of R. Gene Brown, filed as Exhibit 10.18 to AMD's Annual Report on
Form 10-K for the fiscal year ended December 31, 1989, is hereby incorporated by reference.
23
Exhibit
Number Description of Exhibits
------ -----------------------
10.19 Intellectual Property Agreements with Intel Corporation, filed as Exhibit 10.21 to AMD's
Annual Report on Form 10-K for the fiscal year ended December 29, 1991, are hereby
incorporated by reference.
*10.20 Form of Indemnification Agreements with former officers of Monolithic Memories, Inc., filed
as Exhibit 10.22 to AMD's Annual Report on Form 10-K for the fiscal year ended
December 27, 1987, is hereby incorporated by reference.
*10.21 Form of Management Continuity Agreement, filed as Exhibit 10.25 to AMD's Annual Report
on Form 10-K for the fiscal year ended December 29, 1991, is hereby incorporated by
reference.
**10.22 Joint Venture Agreement between AMD and Fujitsu Limited, filed as Exhibit 10.27(a) to
AMD's Amendment No. 1 to its Annual Report on Form 10-K for the fiscal year ended
December 26, 1993, is hereby incorporated by reference.
**10.22(a-1) Technology Cross-License Agreement between AMD and Fujitsu Limited, filed as
Exhibit 10.27(b) to AMD's Amendment No. 1 to its Annual Report on Form 10-K for the
fiscal year ended December 26, 1993, is hereby incorporated by reference.
**10.22(a-2) Third Amendment to Technology Cross License Agreement, effective April 2, 2001, between
AMD and Fujitsu Limited, filed as Exhbit 10.23(b-1) to AMD'S Quarterly Report on
Form 10-Q for the period ended July 1, 2001, is hereby incorporated by reference.
**10.22(b) AMD Investment Agreement between AMD and Fujitsu Limited, filed as Exhibit 10.27(c) to
AMD's Amendment No. 1 to its Annual Report on Form 10-K for the fiscal year ended
December 26, 1993, is hereby incorporated by reference.
**10.22(c) Fujitsu Investment Agreement between AMD and Fujitsu Limited, filed as Exhibit 10.27(d) to
AMD's Amendment No. 1 to its Annual Report on Form 10-K for the fiscal year ended
December 26, 1993, is hereby incorporated by reference.
**10.22(d) First Amendment to Fujitsu Investment Agreement dated April 28, 1995, filed as
Exhibit 10.23(e) to AMD's Annual Report on Form 10-K for the fiscal year ended
December 29, 1996, is hereby incorporated by reference.
10.22(e) Second Amendment to Fujitsu Investment Agreement, dated February 27, 1996, filed as
Exhibit 10.23 (f) to AMD's Annual Report on Form 10-K for the fiscal year ended
December 29, 1996, is hereby incorporated by reference.
**10.22(f-1) Joint Venture License Agreement between AMD and Fujitsu Limited, filed as Exhibit 10.27(e)
to AMD's Amendment No. 1 to its Annual Report on Form 10-K for the fiscal year ended
December 26, 1993, is hereby incorporated by reference.
**10.22(f-2) Amendment to Joint Venture License Agreement, effective April 1, 1999, between AMD and
Fujitsu Limited, filed as Exhibit 10.23(g-1) to AMD's Quarterly Report on Form 10-Q for
the period ended July 1, 2001, is hereby incorporated by reference.
**10.22(g) Joint Development Agreement between AMD and Fujitsu Limited, filed as Exhibit 10.27(f) to
AMD's Amendment No. 1 to its Annual Report on Form 10-K for the fiscal year ended
December 26, 1993, is hereby incorporated by reference.
**10.22(h) Fujitsu Joint Development Agreement Amendment, filed as Exhibit 10.23(g) to AMD's
Quarterly Report on Form 10-Q for the period ended March 31, 1996, is hereby incorporated
by reference.
24
Exhibit
Number Description of Exhibits
------ -----------------------
**10.22(i) Guaranty, effective as of October 1, 2000, by AMD in favor of and for the benefit of Fujitsu
Limited, filed as Exhibit 10.23(j) to AMD's Quarterly Report on Form 10-Q for the period
ended July 1, 2001, is hereby incorporated by reference.
*10.23 AMD's Stock Option Program for Employees Outside the U.S. for options granted after April 25,
2000, filed as Exhibit 10.24 to AMD's Annual Report on Form 10-K for the fiscal year ended
December 31, 2000, is hereby incorporated by reference.
*10.23(a) AMD's U.S. Stock Option Program for options granted after April 24, 2001.
**10.24 Technology Development and License Agreement, dated as of October 1, 1998, among AMD
and its subsidiaries and Motorola, Inc. and its subsidiaries, filed as Exhibit 10.25 to AMD's
Annual Report on Form 10-K for the fiscal year ended December 27, 1998, is hereby
incorporated by reference.
**10.24(a) Amendment to the Technology Development and License Agreement, entered into as of
October 1, 1998, by AMD and its subsidiaries and Motorola, Inc. and its subsidiaries, filed as
Exhibit 10.25(a) to AMD's Annual Report on Form 10-K for the fiscal year ended
December 26, 1999, is hereby incorporated by reference.
**10.24(b) Amendment 2 to the Technology Development and License Agreement, entered into as of
October 1, 1998, by AMD and its subsidiaries and Motorola, Inc. and its subsidiaries, filed as
Exhibit 10.25(b) to AMD's Quarterly Report on Form 10-Q for the period ended July 2, 2000,
is hereby incorporated by reference.
**10.25 Patent License Agreement, dated as of December 3, 1998, between AMD and Motorola, Inc.,
filed as Exhibit 10.26 to AMD's Annual Report on Form 10-K for the fiscal year ended
December 27, 1998, is hereby incorporated by reference.
10.26 Lease Agreement, dated as of December 22, 1998, between AMD and Delaware Chip LLC, filed
as Exhibit 10.27 to AMD's Annual Report on Form 10-K for the fiscal year ended
December 27, 1998 is hereby incorporated by reference.
*10.27 AMD Executive Savings Plan (Amendment and Restatement, effective as of August 1, 1993),
filed as Exhibit 10.30 to AMD's Annual Report on Form 10-K for the fiscal year ended
December 25, 1994, is hereby incorporated by reference.
*10.27(a) First Amendment to the AMD Executive Savings Plan (as amended and restated, effective as of
August 1, 1993), filed as Exhibit 10.28(b) to AMD's Annual Report on Form 10-K for the
fiscal year ended December 28, 1997, is hereby incorporated by reference.
*10.27(b) Second Amendment to the AMD Executive Savings Plan (as amended and restated, effective as
of August 1, 1993), filed as Exhibit 10.28(b) to AMD's Annual Report on Form 10-K for the
fiscal year ended December 28, 1997, is hereby incorporated by reference.
*10.28 Form of Split Dollar Agreement, as amended, filed as Exhibit 10.31 to AMD's Annual Report on
Form 10-K for the fiscal year ended December 25, 1994, is hereby incorporated by reference.
*10.29 Form of Collateral Security Assignment Agreement, filed as Exhibit 10.32 to AMD's Annual
Report on Form 10-K for the fiscal year ended December 26, 1993, is hereby incorporated by
reference.
*10.30 Forms of Stock Option Agreements to the 1992 Stock Incentive Plan, filed as Exhibit 4.3 to
AMD's Registration Statement on Form S-8 (No. 33-46577), are hereby incorporated by
reference.
*10.31 1992 United Kingdom Share Option Scheme, filed as Exhibit 4.2 to AMD's Registration
Statement on Form S-8 (No. 33-46577), is hereby incorporated by reference.
25
Exhibit
Number Description of Exhibits
------ -----------------------
**10.32 AMD 1998 Stock Incentive Plan, filed as Exhibit 10.33 to AMD's Annual Report on Form 10-K
for the fiscal year ended December 27, 1998, is hereby incorporated by reference.
*10.33 Form of indemnification agreements with officers and directors of AMD, filed as Exhibit 10.38
to AMD's Annual Report on Form 10-K for the fiscal year ended December 25, 1994, is
hereby incorporated by reference.
*10.34 1995 Stock Plan of NexGen, Inc., as amended, filed as Exhibit 10.36 to AMD's Annual Report
on Form 10-K for the fiscal year ended December 29, 1996, is hereby incorporated by
reference.
**10.35 Patent Cross-License Agreement dated December 20, 1995, between AMD and Intel
Corporation, filed as Exhibit 10.38 to AMD's Annual Report on Form 10-K for the fiscal year
ended December 31, 1995, is hereby incorporated by reference.
10.36 Contract for Transfer of the Right to the Use of Land between AMD (Suzhou) Limited and
China-Singapore Suzhou Industrial Park Development Co., Ltd., filed as Exhibit 10.39 to
AMD's Annual Report on Form 10-K for the fiscal year ended December 31, 1995, is hereby
incorporated by reference.
*10.37 NexGen, Inc. 1987 Employee Stock Plan, filed as Exhibit 99.3 to Post-Effective Amendment
No. 1 on Form S-8 to AMD's Registration Statement on Form S-4 (No. 33-64911), is hereby
incorporated by reference.
*10.38 1995 Stock Plan of NexGen, Inc. (assumed by AMD), as amended, filed as Exhibit 10.37 to
AMD's Quarterly Report on Form 10-Q for the period ended June 30, 1996, is hereby
incorporated by reference.
*10.39 Form of indemnity agreement between NexGen, Inc. and its directors and officers, filed as
Exhibit 10.5 to the Registration Statement of NexGen, Inc. on Form S-1 (No. 33-90750), is
hereby incorporated by reference.
**10.40 Agreement for Purchase of IBM Products between IBM and NexGen, Inc. dated June 2,
1994, filed as Exhibit 10.17 to the Registration Statement of NexGen, Inc. on
Form S-1 (No. 33-90750), is hereby incorporated by reference.
**10.41 C-4 Technology Transfer and Licensing Agreement dated June 11, 1996, between AMD and
IBM Corporation, filed as Exhibit 10.48 to AMD's Amendment No. 1 to its Quarterly Report
on Form 10-Q/A for the period ended September 29, 1996, is hereby incorporated by
reference.
**10.41(a) Amendment No. 1 to the C-4 Technology Transfer and Licensing Agreement, dated as of
February 23, 1997, between AMD and International Business Machine Corporation, filed as
Exhibit 10.48(a) to AMD's Quarterly Report on Form 10-Q for the period ended March 30,
1997, is hereby incorporated by reference.
**10.42 Design and Build Agreement dated November 15, 1996, between AMD Saxony Manufacturing
GmbH and Meissner and Wurst GmbH, filed as Exhibit 10.49(a) to AMD's Annual Report on
Form 10-K for the fiscal year ended December 29, 1996, is hereby incorporated by reference.
10.42(a) Amendment to Design and Build Agreement dated January 16, 1997, between AMD Saxony
Manufacturing GmbH and Meissner and Wurst GmbH filed as Exhibit 10.49(b) to AMD's
Annual Report on Form 10-K for the fiscal year ended December 29, 1996, is hereby
incorporated by reference.
26
Exhibit
Number Description of Exhibits
------ -----------------------
**10.43 Syndicated Loan Agreement with Schedules 1, 2 and 17, dated as of March 11, 1997, among
AMD Saxony Manufacturing GmbH, Dresdner Bank AG and Dresdner Bank Luxembourg
S.A., filed as Exhibit 10.50(a) to AMD's Quarterly Report on Form 10-Q for the period
ended March 30, 1997, is hereby incorporated by reference.
**10.43(a-1) Supplemental Agreement to the Syndicated Loan Agreement dated February 6, 1998, among
AMD Saxony Manufacturing GmbH, Dresdner Bank AG and Dresdner Bank Luxembourg
S.A., filed as Exhibit 10.50(a-2) to AMD's Annual Report on Form 10-K/A (No.1) for the
fiscal year ended December 28, 1997, is hereby incorporated by reference.
10.43(a-2) Supplemental Agreement No. 2 to the Syndicated Loan Agreement as of March 11, 1997, dated
as of June 29, 1999, among AMD Saxony Manufacturing GmbH, Dresdner Bank AG and
Dresdner Bank Luxembourg S.A., filed as Exhibit 10.50 (a-3) to AMD's Quarterly Report
on Form 10-Q for the period ended June 27, 1999, is hereby incorporated by reference.
**10.43(a-3) Amendment Agreement No. 3 to the Syndicated Loan Agreement, dated as of February 20,
2001, among AMD Saxony Manufacturing GmbH, AMD Saxony Holding GmbH, Dresdner
Bank AG, Dresdner Bank Luxembourg S.A. and the banks party thereto, filed as
Exhibit 10.50(a-4) to AMD's Annual Report on Form 10-K for the fiscal year ended
December 31, 2000, is hereby incorporated by reference.
**10.43(b) Determination Regarding the Request for a Guarantee by AMD Saxony Manufacturing GmbH,
filed as Exhibit 10.50(b) to AMD's Quarterly Report on Form 10-Q for the period ended
March 30, 1997, is hereby incorporated by reference.
**10.43(c) AMD Subsidy Agreement, between AMD Saxony Manufacturing GmbH and Dresdner Bank
AG, filed as Exhibit 10.50(c) to AMD's Quarterly Report on Form 10-Q for the period ended
March 30, 1997, is hereby incorporated by reference.
**10.43(d) Subsidy Agreement, dated February 12, 1997, between Sachsische Aufbaubank and Dresdner
Bank AG, with Appendices 1, 2a, 2b, 3 and 4, filed as Exhibit 10.50(d) to AMD's Quarterly
Report on Form 10-Q for the period ended March 30, 1997, is hereby incorporated by
reference.
10.43(e) AMD, Inc. Guaranty, dated as of March 11, 1997, among AMD, AMD Saxony Manufacturing
GmbH and Dresdner Bank AG, filed as Exhibit 10.50(e) to AMD's Quarterly Report on
Form 10-Q for the period ended March 30, 1997, is hereby incorporated by reference.
10.43(f-1) Sponsors' Support Agreement, dated as of March 11, 1997, among AMD, AMD Saxony
Holding GmbH and Dresdner Bank AG, filed as Exhibit 10.50(f) to AMD's Quarterly
Report on Form 10-Q for the period ended March 30, 1997, is hereby incorporated by
reference.
10.43(f-2) First Amendment to Sponsors' Support Agreement, dated as of February 6, 1998, among
AMD, AMD Saxony Holding GmbH and Dresdner Bank AG, filed as Exhibit 10.50(f-2) to
AMD's Annual Report on Form 10-K for the fiscal year ended December 28, 1997, is hereby
incorporated by reference.
10.43(f-3) Second Amendment to Sponsors' Support Agreement, dated as of June 29, 1999, among AMD,
AMD Saxony Holding GmbH, Dresdner Bank AG and Dresdner Bank Luxembourg S.A.,
filed as Exhibit 10.50 (f-3) to AMD's Quarterly Report on Form 10-Q for the period ended
June 27, 1999, is hereby incorporated by reference.
27
Exhibit
Number Description of Exhibits
------ -----------------------
**10.43(f-4) Third Amendment to Sponsors' Support Agreement, dated as of February 20, 2001, among
AMD, AMD Saxony Holding GmbH, Dresdner Bank AG and Dresdner Bank Luxembourg
S.A, filed as Exhibit 10.50(f-4) to AMD's Annual Report on Form 10-K for the fiscal year
ended December 31, 2000, is hereby incorporated by reference.
10.43(g-1) Sponsors' Loan Agreement, dated as of March 11, 1997, among AMD, AMD Saxony Holding
GmbH and AMD Saxony Manufacturing GmbH, filed as Exhibit 10.50(g) to AMD's
Quarterly Report on Form 10-Q for the period ended March 30, 1997, is hereby incorporated
by reference.
10.43(g-2) First Amendment to Sponsors' Loan Agreement, dated as of February 6, 1998, among AMD,
AMD Saxony Holding GmbH and AMD Saxony Manufacturing GmbH, filed as
Exhibit 10.50(g-2) to AMD's Annual Report on Form 10-K for the fiscal year ended
December 28, 1997, is hereby incorporated by reference.
10.43(g-3) Second Amendment to Sponsors' Loan Agreement, dated as of June 25, 1999, among AMD
and AMD Saxony Holding GmbH and AMD Saxony Manufacturing GmbH, filed as
Exhibit 10.50(g-3) to the Company's Quarterly Report on Form 10-Q for the period ended
June 27, 1999, is hereby incorporated by reference.
10.43(h) Sponsors' Subordination Agreement, dated as of March 11, 1997, among AMD, AMD Saxony
Holding GmbH, AMD Saxony Manufacturing GmbH and Dresdner Bank AG, filed as
Exhibit 10.50(h) to AMD's Quarterly Report on Form 10-Q for the period ended March 30,
1997, is hereby incorporated by reference.
10.43(i) Sponsors' Guaranty, dated as of March 11, 1997, among AMD, AMD Saxony Holding GmbH
and Dresdner Bank AG, filed as Exhibit 10.50(i) to AMD's Quarterly Report on Form 10-Q
for the period ended March 30, 1997, is hereby incorporated by reference.
**10.43(j-1) AMD Holding Wafer Purchase Agreement, dated as of March 11, 1997, among AMD and
AMD Saxony Holding GmbH, filed as Exhibit 10.50(j) to AMD's Quarterly Report on
Form 10-Q for the period ended March 30, 1997, is hereby incorporated by reference.
**10.43(j-2) First Amendment to AMD Holding Wafer Purchase Agreement, dated as of February 20, 2001,
between AMD and AMD Saxony Holding GmbH, filed as Exhibit 10.50(j-1) to AMD's
Annual Report on Form 10-K for the fiscal year ended December 31, 2000, is hereby
incorporated by reference.
**10.43(k) AMD Holding Research, Design and Development Agreement, dated as of March 11, 1997,
between AMD Saxony Holding GmbH and AMD, filed as Exhibit 10.50(k) to AMD's
Quarterly Report on Form 10-Q for the period ended March 30, 1997, is hereby incorporated
by reference.
**10.43(l-1) AMD Saxonia Wafer Purchase Agreement, dated as of March 11, 1997, between AMD Saxony
Holding GmbH and AMD Saxony Manufacturing GmbH, filed as Exhibit 10.50(l) to
AMD's Quarterly Report on Form 10-Q for the period ended March 30, 1997, is hereby
incorporated by reference.
10.43(l-2) First Amendment to AMD Saxonia Wafer Purchase Agreement, dated as of February 6, 1998,
between AMD Saxony Holding GmbH and AMD Saxony Manufacturing GmbH, filed as
Exhibit 10.50 (l-2) to AMD's Annual Report on Form 10-K for the fiscal year ended
December 28, 1997, is hereby incorporated by reference.
28
Exhibit
Number Description of Exhibits
------ -----------------------
**10.43(l-3) Second Amendment to AMD Saxonia Wafer Purchase Agreement, dated as of February 20,
2001, between AMD Saxony Holding GmbH and AMD Saxony Manufacturing GmbH, filed
as Exhibit 10.50(1-3) to AMD's Annual Report on Form 10-K for the fiscal year ended
December 31, 2000, is hereby incorporated by reference.
**10.43(m) AMD Saxonia Research, Design and Development Agreement, dated as of March 11, 1997,
between AMD Saxony Manufacturing GmbH and AMD Saxony Holding GmbH, filed as
Exhibit 10.50(m) to AMD's Quarterly Report on Form 10-Q for the period ended March 30,
1997, is hereby incorporated by reference.
10.43(n) License Agreement, dated March 11, 1997, among AMD, AMD Saxony Holding GmbH and
AMD Saxony Manufacturing GmbH, filed as Exhibit 10.50(n) to AMD's Quarterly Report
on Form 10-Q for the period ended March 30, 1997, is hereby incorporated by reference.
10.43(o) AMD, Inc. Subordination Agreement, dated March 11, 1997, among AMD, AMD Saxony
Holding GmbH and Dresdner Bank AG, filed as Exhibit 10.50(o) to AMD's Quarterly
Report on Form 10-Q for the period ended March 30, 1997, is hereby incorporated by
reference.
**10.43(p-1) ISDA Agreement, dated March 11, 1997, between AMD and AMD Saxony Manufacturing
GmbH, filed as Exhibit 10.50(p) to AMD's Quarterly Report on Form 10-Q for the period
ended March 30, 1997, is hereby incorporated by reference.
**10.43(p-2) Confirmation to ISDA Agreement, dated February 6, 1998, between AMD and AMD Saxony
Manufacturing GmbH, filed as Exhibit 10.50(p-2) to AMD's Annual Report on Form 10-K
for the fiscal year ended December 28, 1997, is hereby incorporated by reference.
10.44 Loan and Security Agreement, dated as of July 13, 1999, among AMD, AMD International
Sales and Service, Ltd. and Bank of America NT&SA as agent, filed as Exhibit 10.51 to
AMD's Quarterly Report on Form 10-Q for the period ended June 27, 1999, is hereby
incorporated by reference.
10.44(a-1) First Amendment to Loan and Security Agreement, dated as of July 30, 1999, among AMD,
AMD International Sales and Service, Ltd. and Bank of America NT&SA, as agent, filed as
Exhibit 10.51(a) to AMD's Quarterly Report on Form 10-Q for the period ended June 27,
1999, is hereby incorporated by reference.
10.44(a-2) Second Amendment to Loan and Security Agreement, dated as of February 12, 2001, among
AMD, AMD International Sales and Service, Ltd. and Bank of America N.A. (formerly
Bank of America NT&SA), as agent, filed as Exhibit 10.51(a-1) to AMD's Annual Report
on Form 10-K for the fiscal year ended December 31, 2000, is hereby incorporated by
reference.
*10.45 Agreement, dated as of June 16, 1999, between AMD and Richard Previte, filed as
Exhibit 10.52 to AMD's Quarterly Report on Form 10-Q for the period ended June 27, 1999,
is hereby incorporated by reference.
*10.46 Management Continuity Agreement, between AMD and Robert R. Herb, filed as Exhibit 10.54
to AMD's Annual Report on Form 10-K for the fiscal year ended December 26, 1999, is
hereby incorporated by reference.
*10.47 Employment Agreement, dated as of January 31, 2002, between AMD and Hector de J. Ruiz.
*10.48 Form of indemnification agreements with officers and directors of AMD, filed as Exhibit 10.56
to AMD's Annual Report on Form 10-K for the fiscal year ended December 26, 1999, is
hereby incorporated by reference.
29
Exhibit
Number Description of Exhibits
- ------ -----------------------
*10.49 Employment Agreement, dated as of September 27, 2000, between AMD and Robert J. Rivet, filed
as Exhibit 10.57 to AMD's Quarterly Report on Form 10-Q for the period ended July 1, 2001, is
hereby incorporated by reference.
**10.50 Patent Cross-License Agreement, dated as of May 4, 2001, between AMD and Intel Corporation,
filed as Exhibit 10.58 to AMD's Quarterly Report on Form 10-Q for the period ended July 1,
2001, is hereby incoporated by reference.
*10.51 Loan Agreement, dated as of June 19, 2001, between AMD and Hector and Judy Ruiz, filed as
Exhibit 10.59 to AMD's Quarterly Report on Form 10-Q for the period ended July 1, 2001, is
hereby incorporated by reference.
13 Pages 10 through 48 of AMD's 2001 Annual Report to Stockholders, which have been incorporated
by reference into Parts II and IV of this annual report.
21 List of AMD subsidiaries.
23 Consent of Independent Auditors, refer to page F-2 and F-3 herein.
24 Power of Attorney.
- --------
* Management contracts and compensatory plans or arrangements required to be
filed as an Exhibit to comply with Item 14(a)(3) of Form 10-K.
** Confidential treatment has been granted as to certain portions of these
Exhibits.
AMD will furnish a copy of any exhibit on request and payment of AMD's
reasonable expenses of furnishing such exhibit.
(b) Reports on Form 8-K.
1. A Current Report on Form 8-K dated September 25, 2001 reporting under
Item 5--Other Events was filed announcing our intention to close two
manufacturing facilities and reduce and restructure other
manufacturing activities and administrative support associated with
these facilities.
2. A Current Report on Form 8-K dated October 5, 2001 reporting under
Item 5--Other Events was filed announcing expected financial results
in the third quarter.
3. A Current Report on Form 8-K dated October 17, 2001 reporting under
Item 5--Other Events was filed announcing our third quarter financial
results.
4. A Current Report on Form 8-K dated November 8, 2001 reporting under
Item 5--Other Events was filed announcing expected financial results
in the fourth quarter.
5. A Current Report on Form 8-K dated December 6, 2001 reporting under
Item 5--Other Events was filed announcing updated expected financial
results in the fourth quarter.
30
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, the registrant has duly caused this report to be signed
on its behalf by the undersigned, thereunto duly authorized.
Advanced Micro Devices, Inc.
March 6, 2002 By: /s/ ROBERT J. RIVET
-------------------------------
Robert J. Rivet
Senior Vice President,
Chief Financial Officer
Pursuant to the requirements of the Securities Exchange Act of 1934, this
report has been signed below by the following persons, on behalf of the
registrant and in the capacities and on the dates indicated.
Signature Title Date
--------- ----- ----
* Chairman of the Board and March 6, 2002
_____________________________ Chief Executive Officer
W. J. Sanders III (Principal Executive
Officer)
* Senior Vice President, Chief March 6, 2002
_____________________________ Financial Officer
Robert J. Rivet (Principal Financial
Officer)
* Director, President and Chief March 6, 2002
_____________________________ Operating Officer
Hector de J. Ruiz
* Director March 6, 2002
_____________________________
Friedrich Baur
* Director March 6, 2002
_____________________________
Charles M. Blalack
* Director March 6, 2002
_____________________________
R. Gene Brown
* Director March 6, 2002
_____________________________
Robert B. Palmer
* Director March 6, 2002
_____________________________
Joe L. Roby
* Director March 6, 2002
_____________________________
Leonard Silverman
*By: /s/ ROBERT J. RIVET
-------------------------
(Robert J. Rivet,
Attorney-in-Fact)
31
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
AND FINANCIAL STATEMENT SCHEDULE
COVERED BY THE REPORT OF INDEPENDENT AUDITORS
ITEM 14(a) (1) and (2)
The information under the following captions, which is included in our 2001
Annual Report to Stockholders, a copy of which is attached hereto as Exhibit
13, is incorporated herein by reference:
Page References
-----------------
2001 Annual
Form Report to
10-K Stockholders
---- ------------
Report of Ernst & Young LLP, Independent Auditors........................................ -- 46
Consolidated Statements of Operations for each of the three years in the period ended
December 30, 2001...................................................................... -- 25
Consolidated Balance Sheets as of December 30, 2001 and December 31, 2000................ -- 26
Consolidated Statements of Stockholders' Equity for each of the three years in the period
ended December 30, 2001................................................................ -- 27
Consolidated Statements of Cash Flows for each of the three years in the period ended
December 30, 2001...................................................................... -- 28
Notes to Consolidated Financial Statements............................................... -- 29-45
Schedule for the three years in the period ended December 30, 2001:
Schedule II Valuation and Qualifying Accounts......................................... F-4 --
All other schedules have been omitted because the required information is
not present or is not present in amounts sufficient to require submission of
the schedules, or because the information required is included in the
Consolidated Financial Statements or Notes thereto. With the exception of the
information specifically incorporated by reference into Parts II and IV of this
Annual Report on Form 10-K, our 2001 Annual Report to Stockholders is not to be
deemed filed as part of this report.
F- 1
CONSENT OF INDEPENDENT AUDITORS
We consent to the incorporation by reference in this Annual Report (Form
10-K) of Advanced Micro Devices, Inc. of our report dated January 8, 2002 with
respect to the consolidated financial statements of Advanced Micro Devices,
Inc. included in the 2001 Annual Report to Stockholders of Advanced Micro
Devices, Inc.
Our audits also included the financial statement schedule of Advanced Micro
Devices, Inc. listed in Item 14(a). This schedule is the responsibility of the
management of Advanced Micro Devices, Inc. Our responsibility is to express an
opinion based on our audits. In our opinion, the financial statement schedule
referred to above, when considered in relation to the basic financial
statements taken as a whole, presents fairly in all material respects the
information set forth therein.
We also consent to the incorporation by reference in the following
Registration Statements of our report dated January 8, 2002 with respect to the
consolidated financial statements incorporated herein by reference, and our
report included in the preceding paragraph with respect to the financial
statement schedule included in this Annual Report (Form 10-K) of Advanced Micro
Devices, Inc.:
. Registration Statement on Form S-8 (No. 33-16095) pertaining to the
Advanced Micro Devices, Inc. 1987 Restricted Stock Award Plan;
. Registration Statements on Forms S-8 (Nos. 33-39747, 333-33855 and
333-77495) pertaining to the Advanced Micro Devices, Inc. 1991 Employee
Stock Purchase Plan;
. Registration Statements on Forms S-8 (Nos. 33-10319, 33-26266, 33-36596
and 33-46578) pertaining to the Advanced Micro Devices, Inc. 1982 and 1986
Stock Option Plans and the 1980 and 1986 Stock Appreciation Rights Plans;
. Registration Statements on Forms S-8 (Nos. 33-46577 and 33-55107)
pertaining to the Advanced Micro Devices, Inc. 1992 Stock Incentive Plan;
. Registration Statement on Form S-8 (No. 333-00969) pertaining to the
Advanced Micro Devices, Inc. 1991 Employee Stock Purchase Plan and to the
1995 Stock Plan of NexGen, Inc;
. Registration Statements on Forms S-8 (Nos. 333-04797 and 333-57525)
pertaining to the Advanced Micro Devices, Inc. 1996 Stock Incentive Plan;
. Registration Statement on Form S-8 (No. 333-60550) pertaining to the
Advanced Micro Devices, Inc. 1996 Stock Incentive Plan and the Advanced
Micro Devices, Inc. 2000 Employee Stock Purchase Plan;
. Registration Statement on Form S-8 (No. 333-68005) pertaining to the
Advanced Micro Devices, Inc. 1998 Stock Incentive Plan;
. Registration Statement on Form S-8 (No. 333-40030) pertaining to the
Advanced Micro Devices, Inc. 1996 Stock Incentive Plan and the Advanced
Micro Devices, Inc. 2000 Employee Stock Purchase Plan;
. Registration Statements on Forms S-8 (No. 333-55052 and 333-74896)
pertaining to the Advanced Micro Devices, Inc. 2000 Stock Incentive Plan;
. Registration Statement on Form S-3 (No. 333-47243), as amended, pertaining
to debt securities, preferred stock, common stock, equity warrants and
debt warrants issued or issuable by Advanced Micro Devices, Inc.;
. Registration Statement on Form S-3 (No. 333-45346) pertaining to debt
securities, preferred stock, common stock, equity warrants and debt
warrants issued or issuable by Advanced Micro Devices, Inc.;
. Post-Effective Amendment No. 1 to the Registration Statement on Form S-8
(No. 33-95888-99) pertaining to the 1995 Stock Plan of NexGen, Inc. and
the NexGen, Inc. 1987 Employee Stock Plan;
F-2
. Post-Effective Amendment No. 1 to the Registration Statement on Form S-8
(No. 33-92688-99) pertaining to the 1995 Employee Stock Purchase Plan of
NexGen, Inc.;
. Post-Effective Amendment No. 1 on Form S-8 to the Registration Statement
on Form S-4 (No. 33-64911) pertaining to the 1995 Employee Stock Purchase
Plan of NexGen, Inc., the 1995 Stock Plan of NexGen, Inc. and the NexGen,
Inc. 1987 Employee Stock Plan; and
. Post-Effective Amendment No. 2 on Form S-3 to the Registration Statement
on Form S-4 (No. 33-64911) pertaining to common stock issuable to certain
warrantholders.
/s/ ERNST & YOUNG LLP
San Jose, California
March 6, 2002
F-3
SCHEDULE II
ADVANCED MICRO DEVICES, INC.
VALUATION AND QUALIFYING ACCOUNTS
Years Ended December 26, 1999,
December 31, 2000 and December 30, 2001
(in thousands)
Additions
Balance Charged Balance
Beginning to End of
of Period Operations Deductions/(1)/ Period
--------- ---------- -------------- -------
Allowance for doubtful accounts:
Years ended:
December 26, 1999........ $12,663 $3,543 $ (828) $15,378
December 31, 2000........ 15,378 8,154 (820) 22,712
December 30, 2001........ 22,712 9,791 (13,233) 19,270
- --------
/(1)/ Accounts (written off) recovered, net.
F-4
AMD-25689-A