SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-Q
|X| Quarterly Report Pursuant to Section 13 or 15(d) of the Securities
Exchange Act of 1934. For the quarterly period ended June 30, 2003
|_| Transition Report Pursuant to Section 13 or 15(d) of the Securities
Exchange Act of 1934. For the transition period from _______________
to _________________.
Commission file number: 0-24293
LMI AEROSPACE, INC.
(Exact name of registrant as specified in its charter)
Missouri 43-1309065
(State or Other Jurisdiction of (I.R.S. Employer
Incorporation or Organization) Identification No.)
3600 Mueller Road
St. Charles, Missouri 63301
(Address of Principal Executive Offices) (ZIP Code)
(636) 946-6525
(Registrant's Telephone Number, Including Area Code)
Indicate by check mark whether the registrant: (1) has filed all
reports required to be filed by Section 13 or 15(d) of the Securities Exchange
Act of 1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days. Yes X No ___
Indicate by check mark whether the registrant is an accelerated filer
(as defined in Rule 12b-2 of the Exchange Act). Yes No _X_
Indicate the number of shares outstanding of each of the issuer's
classes of common stock, as of the latest practicable date.
Title of class of Common Stock Number of Shares outstanding
as of August 14, 2003
Common Stock, par value $.02 per share 8,181,786
LMI AEROSPACE, INC.
QUARTERLY REPORT ON FORM 10-Q
FOR THE FISCAL QUARTER ENDING JUNE 30, 2003
PART I. FINANCIAL INFORMATION
Item 1. Financial Statements (unaudited).
Condensed Consolidated Balance Sheets as of December 31, 2002
and June 30, 2003
Condensed Consolidated Statements of Operations for the three months
ending and the six months ending June 30, 2002 and 2003
Condensed Consolidated Statements of Cash Flows for the six months
ending June 30, 2002 and 2003
Notes to Unaudited Condensed Consolidated Financial Statements
Item 2. Management's Discussion and Analysis of Financial Condition and Results
of Operations.
Item 3. Quantitative and Qualitative Disclosures About Market Risk.
Item 4. Controls and Procedures.
PART II. OTHER INFORMATION
Item 4. Submission of Matters to a Vote of Security Holders.
Item 6. Exhibits and Reports on Form 8-K.
SIGNATURE PAGE
EXHIBIT INDEX
LMI Aerospace, Inc.
Consolidated Balance Sheets
(Amounts in thousands, except share and per share data)
December 31, June 30, 2003
2002 (unaudited)
-----------------------------------------
Assets
Current assets:
Cash and cash equivalents $ 1,182 $ 1,650
Trade accounts receivable, net 11,392 8,022
Inventories 25,181 27,116
Prepaid expenses 978 1,183
Deferred income taxes 1,389 1,389
Income taxes receivable 1,501 1,908
-----------------------------------------
-----------------------------------------
Total current assets 41,623 41,268
Property, plant, and equipment, net 25,986 24,145
Goodwill, net 5,653 5,653
Customer intangible assets, net 4,267 3,993
Other assets 336 168
-----------------------------------------
$ 77,865 $ 75,227
=========================================
Liabilities and stockholders' equity
Current liabilities:
Accounts payable $ 6,107 $ 4,783
Accrued expenses 2,846 2,400
Current installments of long-term debt and capital lease
obligations 4,616 11,987
-----------------------------------------
Total current liabilities 13,569 19,170
Long-term debt and capital lease obligations, less current
installments 24,621 17,982
Deferred income taxes 1,939 1,964
-----------------------------------------
Total long-term liabilities 26,560 19,946
Stockholders' equity:
Common stock of $.02 par value; authorized 28,000,000
shares; issued 8,736,427 at December 31, 2002 and
at June 30, 2003 175 175
Additional paid-in capital 26,171 26,171
Treasury Stock, at cost, 554,641 and 554,641 shares at
December 31, 2002 and June 30, 2003, respectively (2,632) (2,632)
Accumulated other comprehensive income (loss) (17) 56
Retained earnings 14,039 12,341
-----------------------------------------
Total stockholders' equity 37,736 36,111
-----------------------------------------
$ 77,865 $ 75,227
=========================================
See accompanying notes.
LMI Aerospace, Inc.
Consolidated Statements of Operations
(Amounts in thousands, except per share data)
(Unaudited)
For the Three Months Ended For the Six Months Ended
June 30, June 30,
2002 2003 2002 2003
--------------------------------------------------------------------
Net sales $ 20,355 $ 18,865 $ 38,263 $ 39,707
Cost of sales 16,258 16,436 30,360 35,059
--------------------------------------------------------------------
Gross profit 4,097 2,429 7,903 4,648
Selling, general and administrative expenses 3,048 3,249 5,840 6,559
--------------------------------------------------------------------
Income (loss) from operations 1,049 (820) 2,063 (1,911)
Other income (expense):
Interest (330) (387) (592) (827)
Other, net 20 30 11 29
--------------------------------------------------------------------
Income (loss) before income taxes 739 (1,177) 1,482 (2,709)
Provision for (benefit of) income taxes 277 (438) 556 (1,012)
--------------------------------------------------------------------
Income (loss) before cumulative effect of change in (739) (1,697)
accounting principle 462 926
Cumulative effect of change in accounting principle, net
of income tax benefit of $663 - - 1,104 -
--------------------------------------------------------------------
Net income (loss) $ 462 $ (739) $ (178) $ (1,697)
====================================================================
Amounts per common share:
Income (loss) before cumulative effect of change in 1)
accounting principle $ 0.06 $ (0.09) $ 0.12 $ (0.2
Cumulative effect of change in accounting principle - - (0.14) -
--------------------------------------------------------------------
Net income (loss) per common share $ 0.06 $ (0.09) $ (0.02) $
(0.21)
====================================================================
Amounts per common share - assuming dilution:
Income (loss) before cumulative effect of change
in accounting principle $ 0.06 $ (0.09) $ 0.11 $ (0.21)
Cumulative effect of change in accounting principle - - $ (0.13) -
--------------------------------------------------------------------
Net income (loss) per common share - assuming dilution $ (0.09) $ (0.21)
$ 0.06 $ (0.02)
====================================================================
====================================================================
Weighted average common shares outstanding 8,040,529 8,181,786 8,032,275 8,181,786
====================================================================
Weighted average common shares outstanding -
assuming dilution 8,201,064 8,181,786 8,174,069 8,181,786
====================================================================
See accompanying notes.
LMI Aerospace, Inc.
Consolidated Statements of Operations
(Amounts in thousands, except per share data)
(Unaudited)
For the Six Months Ended June 30,
2002 2003
------------------------------------------
Operating activities
- --------------------
Net income (loss) $ 926 $ (1,697)
Adjustments to reconcile net loss to
net cash provided by operating activities:
Depreciation and amortization 2,044 2,457
Changes in operating assets and liabilities:
Trade accounts receivable (2,586) 3,370
Inventories (1,081) (1,935)
Prepaid expenses and other assets 57 29
Income taxes (73) (450)
Accounts payable 216 (1,324)
Accrued expenses (39) (378)
----------------------------------------------------
Net cash provided by (used by) operating activities (536) 72
Investing activities
- --------------------
Additions to property, plant, and equipment (1,131) (636)
Proceeds from sale of equipment - 301
Acquisition of Versaform, net of cash acquired (10,285) -
Acquisition of Stretch Forming assets (860) -
Acquisition of Tempco, net of cash acquired (300) -
----------------------------------------------------
Net cash used by investing activities (12,576) (335)
Financing activities
- --------------------
Net borrowings on revolving line of credit - 3,241
Principal payments on long-term debt (1,181) (2,510)
Treasury stock transactions, net (8) -
Proceeds from issuance of long term debt 11,000 -
Proceeds from exercise of stock options 83 -
----------------------------------------------------
Net cash from financing activities 9,894 731
Net increase (decrease) in cash and cash equivalents (3,218) 468
Cash and cash equivalents, beginning of year 4,645 1,182
----------------------------------------------------
Cash and cash equivalents, end of quarter $ 1,427 $ 1,650
====================================================
See accompanying notes.
LMI Aerospace, Inc.
Notes to Consolidated Financial Statements
(Dollar amounts in thousands, except share and per share data)
(Unaudited)
June 30, 2003
1. Accounting Policies
Basis of Presentation
LMI Aerospace, Inc. (the "Company") fabricates, machines, and integrates formed,
close tolerance aluminum and specialty alloy components for use by the aerospace
and laser equipment industries. The Company is a Missouri corporation with
headquarters in St. Charles, Missouri. The Company maintains facilities in St.
Charles, Missouri; Auburn, Washington; Tulsa, Oklahoma; Wichita, Kansas; Irving,
Texas; Sun Valley and Oceanside, California; and Langley, British Columbia.
The accompanying unaudited consolidated financial statements have been prepared
in accordance with accounting principles generally accepted in the United States
for interim financial information and with the instructions to Form 10-Q and
Article 10 of Regulation S-X. Accordingly, they do not include all of the
information and footnotes required by accounting principles generally accepted
in the United States for complete financial statements. In the opinion of
management, all adjustments (consisting of normal recurring accruals) considered
necessary for a fair representation have been included. Operating results for
the three and six months ended June 30, 2003 are not necessarily indicative of
the results that may be expected for the year ended December 31, 2003. These
financial statements should be read in conjunction with the consolidated
financial statements and accompanying footnotes included in the Company's Annual
Report on Form 10-K for the year ended December 31, 2002 as filed with the SEC.
Operating Results and Management's Plan
As discussed in the Company's Annual Report on 10-K, the Company has undertaken
a plan to reduce operating expenses and increase efficiencies in conjunction
with a financial consultant, as required by the Company's primary lender. On
July 23, 2003, as outlined in Note 8, the Company announced the details of this
plan. Based on forecasted operating results and cash flows, management believes
the Company will have sufficient funding for its operations in 2003. The
forecasted operating results and cash flows are dependent upon management's
ability to improve performance. While management believes the forecast is
achievable, to the extent management does not improve performance, the Company
may have to seek alternative sources of financing. There can be no assurances
the Company can obtain alternative financing on reasonable and acceptable terms.
Use of Estimates
The preparation of financial statements in conformity with accounting principles
generally accepted in the United States requires management to make certain
estimates and assumptions. These estimates and assumptions affect the reported
amounts in the financial statements and accompanying notes. Actual results could
differ from those estimates.
Stock-Based Compensation
The Company accounts for its stock based compensation in accordance with
Accounting Principles Board ("APB") Opinion No. 25, Accounting for Stock Issued
to Employees, and related interpretations and provides the pro forma disclosure
provisions of Statements of Financial Accounting Standards No.
LMI Aerospace, Inc.
Notes to Consolidated Financial Statements
(Dollar amounts in thousands, except share and per share data)
(Unaudited)
June 30, 2003
("SFAS") 123, Accounting for Stock-Based Compensation and SFAS No. 148,
Accounting for Stock-Based Compensation - Transition and Disclosure. No stock
based employee compensation expense is recognized in the statement of
operations, as all options granted had an exercise price equal to market value
of the underlying common stock on the date of grant. Had the Company determined
compensation cost based on the fair value at the grant date under SFAS No. 123,
net income and earnings per share amounts would have been as follows:
Three Months Ended June 30, Six Months Ended June 30,
2002 2003 2002 2003
------------------------------------------------------------------------------
Net income (loss) $ 462 $ (739) $ (178) $ (1,697)
Total stock based employee compensation
expense determined under fair value based
method, net of tax effect (105) (23) (121) (37)
------------------------------------------------------------------------------
Pro forma net income (loss) $ 357 $ (762) $ (299) $ (1,734)
==============================================================================
Net income (loss) per common share - basic and
assuming dilution
As reported $ 0.06 $ (0.09) $ (0.02) $ (0.21)
Pro forma $ 0.04 $ (0.09) $ (0.04) $ (0.21)
Exit Costs
The Company adopted SFAS No. 146, Accounting for Costs Associated with Exit and
Disposal Activities, in 2003. SFAS No. 146 requires companies to recognize costs
associated with exit and disposal activities when they are incurred rather than
at the date of commitment to an exit or disposal plan. Costs covered include
lease termination, costs to consolidate facilities, and certain employee
severance costs that are associated with a restructuring, discontinued
operation, plant closing, or other exit or disposal activity.
2. Acquisitions
Versaform
On May 16, 2002, the Company acquired all of the outstanding stock of Versaform
Corporation and BC 541775, Ltd., a holding company that owns 100% of the common
stock of Versaform Canada Corporation (collectively, "Versaform") for
approximately $11,787 consisting of cash and a note payable of $1,300. Versaform
forms large sheet metal and extrusion components predominantly for the
corporate, regional, and military aerospace markets from two facilities in
Oceanside, California and one facility in Langley, British Columbia, Canada.
LMI Aerospace, Inc.
Notes to Consolidated Financial Statements
(Dollar amounts in thousands, except share and per share data)
(Unaudited)
June 30, 2003
The acquisition was accounted for as a purchase business combination, and
accordingly, the results of operations were included in the Company's financial
statements after May 16, 2002. The cost to acquire Versaform has been allocated
to the assets acquired and liabilities assumed according to their estimated fair
values at the time of the acquisition as follows:
Working capital $ 400
Property, plant, and equipment 3,179
Assumed long-term liabilities (871)
Customer-related intangible 3,975
Goodwill (nondeductible) 5,104
----------------
$ 11,787
================
The intangible asset relates to acquired customer relationships and is being
amortized over 15 years on a straight line basis. Based on the terms of the
purchase agreement, the Company is obligated to pay additional consideration if
sales to a specific customer exceed certain annual thresholds over the three
years following the acquisition. As of June 30, 2003, sales to the specific
customer did not meet these thresholds and is not expected to meet the
thresholds for the remainder of the three year contingency period. The purchase
agreement allows for certain adjustments to the purchase price for claims in
excess of $100. The Company has filed a claim for reimbursement of certain
liabilities existing at the closing date and has recorded a receivable from the
seller of $196. The Company expects to resolve the purchase price adjustment in
2003. Versaform's sales were approximately $12,000 in 2001.
Southern Stretch Forming and Fabrication, Inc.
On September 30, 2002, the Company acquired certain assets and assumed certain
liabilities of Southern Stretch Forming and Fabrication, Inc. ("SSFF"). The
former owner of Versaform, currently a director of the Company, held a 50%
interest in SSFF. Following the Company's acquisition of Versaform, the director
purchased the remaining 50% interest in SSFF and sold SSFF to the Company. The
assets consisted primarily of inventory, machinery and equipment. The
acquisition was accounted for as a purchase business combination, and
accordingly, the related results of operations have been included in the
consolidated statement of operations after September 30, 2002. The purchase
price of $444, which includes the assumption of debt and direct costs of the
transaction, consisted of $235 in cash and 90,000 shares of LMI common stock,
with a market value of $209.
The cost to acquire these assets has been allocated to the assets according to
their fair values and consisted of inventory of $115 and equipment and machinery
of $718, and assumed liabilities of $389. Net sales for SSFF for 2001 were
approximately $3,820, of which approximately $1,739 were to the Company.
Stretch Forming Corporation
On June 12, 2002, the Company acquired certain assets of Stretch Forming
Corporation ("SFC"), based in Southern California. The purchase price of $861
was allocated to the assets acquired based on their fair value and consisted of
working capital of $465, equipment of $66, and an intangible asset of $330
related to production backlog, to be amortized over 3 years on a straight line
basis.
LMI Aerospace, Inc.
Notes to Consolidated Financial Statements
(Dollar amounts in thousands, except share and per share data)
(Unaudited)
June 30, 2003
3. Goodwill and Intangibles
The Company adopted SFAS No. 142, Goodwill and Other Intangibles on January 1,
2002, and performed its transitional impairment test of goodwill. The Company
concluded in 2002 that its business was comprised of two reporting segments,
Sheet Metal and Machining and Technology (see Note 6 to the Consolidated
Financial Statement). The Company further concluded that its reporting segments
constituted reporting units under SFAS No. 142. The Company determined that the
carrying value of its Sheet Metal segment exceeded its fair value, which
indicated potential impairment of the Sheet Metal segment's goodwill of $1,767.
The Company engaged valuation experts to assist in performing a review of the
fair value of the Sheet Metal segment's tangible and intangible assets,
including goodwill, as of January 1, 2002. Based upon the valuation completed in
the fourth quarter of 2002, relying primarily on a discounted cash flow
valuation technique, the Company recorded a $1,767 charge ($1,104 net of tax)
for the impairment of the Sheet Metal segment's goodwill. The charge is
reflected as the cumulative effect of adopting the new accounting standard as of
January 1, 2002.
Goodwill at December 31, 2002 and June 30, 2003 relates to the Machining and
Technology segment.
4. Inventories
Inventories consist of the following:
December 31, June 30,
2002 2003
--------------------------------------
Raw materials $ 4,469 $4,405
Work in process 5,576 5,216
Finished goods 15,136 17,495
--------------------------------------
$ 25,181 $27,116
======================================
During the second half of 2002 and early 2003, the Company encountered
production difficulties and inefficiencies on new programs with two significant
customers due to several factors including inadequate tooling, poor performance
of a critical subcontractor, and changes in customer acceptance criteria. The
Company recorded a lower of cost or market reserve on work in process primarily
related to these programs of $1,957 at December 31, 2002. The Company is
currently engaged in negotiations to recover claims submitted for certain costs
incurred and requests for re-pricing of several components. At June 30, 2003,
the Company had lower of cost on market reserves of $904 primarily related to
these programs.
LMI Aerospace, Inc.
Notes to Consolidated Financial Statements
(Dollar amounts in thousands, except share and per share data)
(Unaudited)
June 30, 2003
5. Long-Term Debt and Revolving Line of Credit
Long-term debt and revolving line of credit consists of the following:
December 31, June 30,
2002 2003
-----------------------------------------
Term Loans:
Tempco $ 11,705 $ 10,688
Versaform 10,738 9,952
Revolving line of credit 4,417 7,659
Note payable to Director, principal and interest payable
monthly at 7% 1,003 831
Notes payable, principal and interest payable monthly, at
fixed rates, ranging from 6.99% to 10.00% 1,212 801
Capital lease obligations 162 38
-----------------------------------------
29,237 29,969
Less current installments 4,616 11,987
-----------------------------------------
-----------------------------------------
$ 24,621 $ 17,982
=========================================
The Company has a loan agreement ("Loan Agreement") with Union Planters Bank,
NA. The Loan Agreement consists of a revolving line of credit ("Revolver"), a
term loan to finance the purchase of Tempco ("Tempco Term Loan"), and a term
loan to finance the purchase of Versaform ("Versaform Term Loan"). The Company's
Loan Agreement is secured by all the domestic assets of the Company and requires
compliance with certain non-financial and financial covenants including minimum
levels of EBITDA and tangible worth.
On April 14, 2003, the Company obtained a waiver of certain covenant violations
at December 31, 2002 and an amendment to the Loan Agreement. The amended Loan
Agreement extended the maturity of the line of credit to January 2004, increased
the capacity under the line of credit by $3,000 and the interest rate by 0.25%
and eased the quarterly financial covenant requirements through December 31,
2003.
The Company's Revolver allows for a $10,000 line of credit, subject to a
borrowing base calculation, to fund various corporate needs. The Company agreed
to reduce the amount available under the Revolver by any proceeds from income
tax carry backs attributable to 2002 losses and specific claims currently being
negotiated. During the second quarter, the Company received $780 for tax loss
carry backs and has reduced the Revolver cap to $9,220. Interest is payable
monthly based on a quarterly cash flow leverage calculation and the prevailing
LIBOR rate. This facility matures in January 2004. The credit facility prohibits
the payment of cash dividends on common stock without the prior written consent
of the lender. The Company had $7,659 outstanding under this line at June 30,
2003 at an interest rate of 3.7%. The Company had $1,561 available under this
line at June 30, 2003.
The Company drew $14,250 on the Tempco Term Loan on April 2, 2001. The Tempco
Term Loan requires interest payments only for six months then monthly principal
and interest payments over three years using a seven year amortization and bears
interest at ninety day LIBOR plus 3%, subject to a cap of 8.5% and a floor of
7.0%. The interest rate was 7.0% at June 30, 2003.
The Versaform Term Loan was issued for $11,000 on May 14, 2002. The Versaform
Term Loan requires monthly principal and interest payments over three years
using a seven year amortization and bears interest at the ninety day LIBOR plus
3%. The interest rate was 4.3% at June 30, 2003.
LMI Aerospace, Inc.
Notes to Consolidated Financial Statements
(Dollar amounts in thousands, except share and per share data)
(Unaudited)
June 30, 2003
The Company entered into a note payable for $1,300 with the prior owner of
Versaform in connection with the acquisition. The prior owner has since become a
member of the board of directors of the Company. This note is payable monthly
over three years and bears interest at 7.0%. This note is secured by 65% of the
stock of the Company's Canadian subsidiary.
The Company entered into various notes payable for the purchase of certain
equipment. The notes are payable in monthly installments including interest
ranging from 6.99% - 10.0% through November 2006. The notes payable are secured
by equipment.
The Company entered into capital lease agreements for the purchase of certain
equipment. The leases are payable in monthly installments including interest
ranging from 4.98% - 9.15% through August 2005.
6. Business Segment Information
As set forth in the criteria of statement of SFAS No. 131, Disclosures about
Segments of an Enterprise and Related Information, the Company is organized into
two reportable segments: Sheet Metal and Machining and Technology. The Sheet
Metal segment fabricates, finishes, and integrates close tolerance aluminum and
specialty alloy components primarily for the aerospace industry. The Machining
and Technology segment machines close tolerance aluminum and specialty alloy
components for the aerospace, semiconductor, and medical products industries.
The table below presents information about reported segments on the basis used
internally to evaluate segment performance:
Three Months Ended June 30, Six Months Ended June 30,
2002 2003 2002 2003
-------------------------------------------------------------------------------
Net sales:
Sheet Metal $ 14,816 $ 16,037 $ 26,970 $ 33,201
Machining and Technology 5,539 2,828 11,293 6,506
-------------------------------------------------------------------------------
$ 20,355 $ 18,865 $ 38,263 $ 39,707
===============================================================================
Income (loss) before income taxes:
Sheet Metal $ (306) $ (777) $ (541) $ (2,284)
Machining and Technology 1,045 (400) 2,023 (425)
-------------------------------------------------------------------------------
$ 739 $ (1,177) $ 1,482 $ (2,709)
===============================================================================
Upon adoption of SFAS No. 142 on January 1, 2002, the Company recorded a $1,767
charge ($1,104 net of tax) for the impairment of the Sheet Metal segment's
goodwill. (See Note 3)
LMI Aerospace, Inc.
Notes to Consolidated Financial Statements
(Dollar amounts in thousands, except share and per share data)
(Unaudited)
June 30, 2003
7. Comprehensive Income (Loss)
Comprehensive income (loss) includes adjustments to net income (loss) for
changes in the fair value of available-for-sale securities deemed not to be
other than temporary and the change in foreign currency translations as follows:
Three Months Ended June 30, Six Months Ended June 30,
2002 2003 2002 2003
--------------------------------------------------------------------
Net income (loss) $ 462 $ (739) $ 926 $ (1,697)
Other comprehensive income (loss):
Unrealized gain (loss) on investments 96 - (19) -
Foreign currency translation adjustments 34 42 34 73
--------------------------------------------------------------------
Comprehensive income (loss) $ 592 $(697) $941 $ (1,624)
====================================================================
8. Subsequent Event
On July 23, 2003, the Company announced plans to reduce its St. Charles,
Missouri workforce by approximately 25% and exit certain leased facilities in
St. Charles in connection with its plan to reduce operating expenses and
increase efficiency, as outlined in Note 1. As required by SFAS No. 146, the
cost of severance and exiting the leased facilities, estimated at $300, will be
expensed as incurred principally in the third quarter of 2003.
Item 2. Management's Discussion and Analysis of Financial Condition and Results
of Operation.
The Private Securities Litigation Reform Act of 1995 provides a "safe harbor"
for forward-looking statements. LMI Aerospace, Inc. (the "Company") makes
forward-looking statements in the "Management's Discussion and Analysis of
Financial Condition and Results of Operations" section of this report on Form
10-Q, which represent the Company's expectations or beliefs about future events
and financial performance. When used in this report, the words "expect,"
"believe," "anticipate," "goal," "plan," "intend," "estimate," "may," "will" or
similar words are intended to identify forward-looking statements. These
forward-looking statements are subject to known and unknown risks, uncertainties
and assumptions, including those referred to in the "Risk Factors" section of
the Company's Annual Report on Form 10-K for the year ended December 31, 2002,
as filed with the Securities and Exchange Commission on April 15, 2003.
In light of these risks, uncertainties, and assumptions, the forward-looking
events discussed may not occur. In addition, actual results could differ
materially from those suggested by the forward-looking statements. Accordingly,
investors are cautioned not to place undue reliance on the forward-looking
statements. Except as required by law, the Company undertakes no obligation to
publicly update or revise any forward-looking statements, whether as a result of
new information, future events or otherwise. Investors should, however, review
additional disclosures made by the Company from time to time in its periodic
filings with the Securities and Exchange Commission.
This Quarterly Report on Form 10-Q should be read completely and with the
understanding that the Company's actual future results may be materially
different from what the Company expects. All forward-looking statements made by
the Company in this Form 10-Q and in the Company's other filings with the
Securities and Exchange Commission are qualified by these cautionary statements.
The consolidated financial statements are prepared in accordance with accounting
principles generally accepted in the United States, which require the Company to
make estimates and assumptions (see Note 1 to the consolidated financial
statements). The Company believes that certain significant accounting policies
have the potential to have a more significant impact on the financial statements
either because of the significance of the financial statements to which they
relate or because they involve a higher degree of judgment and complexity. A
summary of such critical accounting policies can be found in the section
entitled "Management's Discussion and Analysis of Financial Condition and
Results of Operation" contained in the Company's Annual Report on Form 10-K for
the fiscal year ended December 31, 2002.
OVERVIEW
The Company is a leader in fabricating, machining, finishing and integrating
formed, close tolerance aluminum and specialty alloy components and sheet metal
products for use by the aerospace, technology and commercial sheet metal
industries. Aerospace components manufactured by the Company include leading
edge wing slats, flaps and lens assemblies; cockpit window frame assemblies;
fuselage skins and supports; and passenger and cargo door frames and supports.
The Company manufactures more than 20,000 aerospace components for integration
into a variety of civilian and military aircraft platforms manufactured by
leading original equipment manufacturers and prime subcontractors. In addition,
the Company produces components and assemblies for laser equipment used by
semiconductor and medical equipment manufacturers in the technology industry.
The Company also produces sheet metal products for various companies in the
commercial sheet metal industry. In addition to manufacturing quality
components, the Company provides its customers with value-added services related
to the design, production and finishing of its components.
Historically, the Company's business was primarily dependent on the commercial
aircraft market, with Boeing as the Company's principal customer. In order to
diversify its products and customer base, the Company implemented an acquisition
and marketing strategy in the late 1990's that has broadened the number of
industries to which the Company sells its components, and, within the aerospace
industry, diversified its customer base to reduce the Company's dependence on
Boeing. The following table illustrates the Company's sales for the first half
of 2003 as compared to the first half of 2002:
Year to Date 2002 Year to Date 2003
Market % of Total % of Total
- --------------------------------------------------------------------------------------------------------------
Commercial Aircraft 32.9 27.8
Corporate and regional aircraft 17.7 27.8
Military products 23.5 24.3
Technology products 9.6 9.7
Other (1) 16.3 10.4
--------------------------------------
Total 100.0 100.0
======================================
(1) Includes commercial sheet metal and various aerospace products.
Beginning in 2001, the Company began an aggressive acquisition campaign that
resulted in the consummation of four transactions through 2002. In April 2001,
the Company acquired Tempco Engineering Inc. ("Tempco") and its affiliates,
which expanded the Company's aerospace product line and introduced the Company
to the technology industry. The Company acquired Versaform Corporation
("Versaform") and its affiliates on May 16, 2002, Stretch Forming Corporation
("SFC") on June 12, 2002, and Southern Stretch Forming and Fabrication, Inc.
("SSFF") on September 30, 2002. The Versaform acquisition significantly
increased the Company's presence in the corporate and regional aircraft market,
while adding some military products to the Company's product line. The SFC
acquisition further supplemented the Company's military product line. Finally,
the Company's acquisition of SSFF increased the Company's business in the
corporate and regional aircraft market.
Unlike the other acquisitions, Tempco operates and is managed as an autonomous
unit. Accordingly it is treated as a business segment separate from the
Company's other businesses. The Tempco business, which sells machined components
to both the aerospace and technology industries, is referred to in this
discussion as the Machining and Technology Segment and the Company's other
businesses are referred to as the Sheet Metal Segment.
RESULTS OF OPERATIONS
Three months ended June 30, 2003 versus June 30, 2002
Sheet Metal Segment
Net Sales. Net sales for this segment were $16.0 million in the quarter ended
June 30, 2003, up 8.1% from $14.8 million in the prior year. This increase is
primarily attributable to the operations of Versaform, acquired in May 2002,
which contributed $3.4 million in the second quarter of 2003, up from $2.4
million in 2002.
Net sales for use on Boeing commercial aircraft were $5.8 million in the second
quarter of 2003, up slightly from $5.7 million in 2002.
Net sales for use on corporate and regional aircraft were $4.9 million in the
second quarter of 2003, up 6.5% from $4.6 million in 2002 due to increases of
$0.1 million on both Gulfstream and Bombardier programs.
Military programs generated net sales of $4.3 million in the second quarter of
2003, up 59.3% from $2.7 million in 2002. Net sales on the Company's F-16
program with Lockheed Martin and a refurbishment program on the B-52 each added
$0.8 million in the current quarter.
Gross Profit. Gross profit for the quarter ended June 30, 2003 was $2.2 million
(13.8% of net sales), down from $2.4 million (16.2% of net sales) in 2002. Cost
reductions directed toward payroll and controllable expenses initiated in all
locations were offset by start-up costs at Versaform on a B-52 refurbishment
program, a fuselage skin program for the 767, and continuing production
difficulties with F-16 and C-130 components.
Selling, General and Administrative Expenses. Selling, general and
administrative expenses were $2.8 million in the second quarter of 2003 compared
to $2.6 million in 2002. The increase in expenses is mainly attributable to
higher professional services fees and the addition of Versaform for a full
quarter in 2003.
Interest Expense. Interest expense for this segment is primarily attributable to
debt issued in conjunction with the purchase of Versaform. Interest expense in
the second quarter of 2003 and 2002 was $0.1 million.
Machining and Technology Segment
Net Sales. Net sales in this segment were $2.8 million in the second quarter of
2003, down 49.1% from $5.5 million in 2003. Net sales for use on laser equipment
were $1.6 million, down 52.9% from $3.4 million in 2002, principally due to
reduced demand from the technology market served by the Company. Additionally,
the segment experienced declines in net sales to the military markets with sales
dropping to $0.9 million in the current quarter from $1.7 million in 2003.
Gross Profit. Gross profit for the second quarter of 2003 was $0.2 million (7.1%
of net sales), down from $1.7 million (30.9% of net sales) in 2002. The
significant reduction in sales was met with reductions in subcontracting and
payroll related expenses. However, the decline in sales outpaced the segment's
ability to reduce costs. Future cost reductions are expected to more
appropriately align operating costs with current demand.
Selling, General and Administrative Expenses. Selling, general and
administrative expenses were $0.4 million in the second quarter of 2003,
unchanged from the prior year.
Interest Expense. Interest expense for this segment is primarily the result of
the acquisition debt related to the purchase of Tempco Engineering. Interest was
$0.2 million in both the second quarter of 2003 and 2002.
Non-Operating Expenses
Interest Expense. Interest expense not assigned to segments results from
borrowings for general corporate requirements, predominantly under the Company's
revolving line of credit. In the second quarter of 2003, the Company incurred
interest expense of $0.1 million versus a minimal amount in 2002. The Company
did not have any amounts outstanding on its revolving line of credit in the
second quarter of 2002.
Income Taxes. Losses in the second quarter of 2003 generated an income tax
benefit of $0.4 million compared to an income tax expense of $0.3 million in
2002. The effective tax rate was 37.5% in both 2003 and 2002.
Six months ended June 30, 2003 versus June 30, 2002
Sheet Metal Segment
Net Sales. Net sales for the Sheet Metal segment were $33.3 million for the
first six months of 2003, an increase of 23.3% from $27.0 in 2002. The Company
acquired Versaform in May 2002 which contributed $7.5 million in 2003 and $2.4
million in 2002.
Net sales of Boeing commercial aircraft product were $11.0 million in 2003, down
12.0% from $12.5 million in 2002. Net sales on the 737 were $5.2 million in
2003, down from $6.8 million in 2002, consistent with the decline in production
schedules at Boeing. Additionally, declines in Boeing's production rates on the
767 resulted in a decrease in net sales to $0.8 million in 2003 from $1.4
million in 2002. Offsetting these declines was an increase of $0.9 million in
net sales for the 747 attributable to the recently established distribution
facility in Tulsa.
Product used in corporate and regional aircraft generated $11.0 million in the
first half of 2003, up 69.2% from $6.5 million in 2002. The acquisition of
Versaform contributed $4.5 million to corporate and regional net sales in 2003
compared to $1.7 million in 2002. Net sales for use on Gulfstream aircraft were
$8.2 million in 2003, up from $5.0 million in 2002 due to acquisitions and an
offload program that began in the second quarter of 2002. Additionally, sales
for Bombardier and Cessna aircraft and auxiliary power unit components for
Hamilton Sundstrand generated $2.3 million in 2003, up 43.8% from $1.6 in 2002,
due primarily to acquisitions.
Net sales of military products were $8.1 million, up 58.8% from $5.1 million.
This increase is mainly attributable to net sales on a B-52 refurbishment
program of $1.1 million in 2003 and net sales on the Lockheed Martin F-16
program which added net sales of $3.8 million in 2003 compared to $2.5 million
in 2002.
Gross Profit. Gross profit for the first half of 2003 was $3.8 million (11.4% of
net sales), down from $4.7 million (17.4% of net sales) in 2002. The decline in
gross profit is primarily attributable to continued production difficulties with
certain military and corporate and regional products. Claims and re-pricing have
been presented to these customers and negotiations are on going. The Company
expects to complete these negotiations during the third quarter. Additionally,
start up costs on the B-52 refurbishment, 767 fuselage skin programs, and
continuing production difficulties with F-16 and C-130 components reduced gross
profits.
Selling, General and Administrative Expenses. Selling, general and
administrative expenses were $5.7 million in 2003, an increase from $5.1 million
in 2002. This increase is primarily the result of higher professional service
fees of approximately $0.3 million, increased payroll costs of $0.2 million and
amortization expense of approximately $0.1 million related to customer contracts
and relationships gained in acquisitions during 2002.
Interest Expense. Interest expense in 2003 was $0.3 million compared to $0.1
million in 2002. The acquisition of Versaform during May 2002 resulted in only
two months of interest expense in 2002 compared to six months in 2003.
Machining and Technology Segment
Net Sales. Net sales for the Machining and Technology segment were $6.5 million
in the first half of 2003, down 42.4% from $11.3 million in 2002. Net sales of
product for laser equipment manufacturers were $4.1 million, down 34.9% from
$6.3 million in 2002 due to weakness in the technology markets. Additionally,
products used in the military and aerospace markets were down to $1.6 million in
2003 from $3.9 million in 2002.
Gross Profit. Gross profit for the first six months of 2003 was $0.8 million
(12.3% of net sales), a decrease from $3.3 million (29.2% of net sales) in 2002.
Reductions in payroll and subcontracting costs were insufficient to offset the
reductions in net sales of 42.4%.
Selling, General and Administrative Expenses. Selling, general and
administrative expenses were $0.8 million in 2003, unchanged from 2002.
Interest Expense. Interest expense during 2003 was $0.4 million, a decrease from
$0.5 million in 2002. Scheduled monthly payments on term loans issued to acquire
Tempco in 2001 have reduced the indebtedness, thereby reducing interest expense.
Non-Operating Expenses
Interest Expense. Interest expense not assigned to segments was $0.2 million in
2003, up from less than $0.1 million in 2002. This increase is attributable to
advances under the Company's revolving line of credit during 2003.
Income Taxes. Losses in the first half of 2003 generated an income tax benefit
of $1.0 million compared to an expense of $0.6 million in 2002. The Company's
effective income tax rate is 37.5%, unchanged from the prior year.
Cumulative Effect of Change in Accounting Principle. Effective January 1, 2002,
the Company adopted SFAS No. 142, under which goodwill will no longer be
amortized but instead be tested for impairment on an annual basis. The Company
completed the required transitional impairment test and recorded a $1,767 charge
($1,104 net of tax for the impairment of the Sheet Metal segments goodwill as of
January 1, 2002. See note 3 to the Consolidated Financial Statements included as
part of this Form 10-Q for further information.
Liquidity and Capital Resources
The Company experienced a net loss of $1.7 million in the first six months of
2003. Cash flow from operating activities generated $0.1 million during the
first six months. A combination of increased collection efforts and reduced
sales late in the second quarter resulted in a reduction of accounts receivable
of $3.4 million. Cash was used to fund increases in inventories of $1.8 million
and reductions in accounts payable and accrued liabilities of $1.7 million.
Additionally, the Company collected $0.8 million in income tax refunds in the
second quarter of 2003 due to the loss experienced in 2002.
During the first half of 2003, the Company spent $0.6 million on capital
expenditures. These purchases have primarily been recurring purchases to
maintain sound operating capabilities, a new mill at the Company's Auburn
facility and design and layout costs for a building the Company plans to lease
in the San Diego area to consolidate its three locations there.
The net losses experienced by the Company in 2002 caused the Company to violate
certain restrictive financial covenants in its bank credit agreement with its
primary lender. Additionally, subsequent to year end, the Company exhausted its
available borrowings under its revolving credit facility of $7.0 million. In
April 2003, the Company negotiated revised covenants, secured an increase in its
revolving credit facility to $10.0 million, subject to a borrowing base
calculation, and extended the maturity date of the revolving credit facility to
January 5, 2004. The revolving credit facility is scheduled to be reduced by
collection of certain income tax and claim proceeds. At June 30, 2003, the
revolving credit agreement had been reduced to $9.2 million due to collection of
certain income tax refunds.
As a part of the negotiations, the bank also required an increase in the
interest rate on the revolving credit facility of 0.25%, restrictions on capital
expenditures, and a fee of $25,000. Additionally, the bank required the Company
to retain a financial consultant to work with management to analyze operations
and cash management which it has done. Independently, in the second quarter of
2003, the Company has undertaken a plan to reduce operating expenses at all
facilities with primary emphasis on the St. Charles facility. These immediate
cost savings include reductions in overtime worked and controllable expenses.
Management, in conjunction with the financial consultant, submitted a plan for
improving operating performance to the bank on July 1, 2003. This plan included
a reduction in employment levels at the Company's St. Charles facility of
approximately 60 people, realignment of reporting responsibilities and operating
metrics, the initiation of a raw material cut to size contract with a supplier
to reduce the administrative and operational management of raw material, and the
consolidation of operations into two facilities from the four currently
occupied. Severance and relocation costs are estimated to be $0.3 million,
principally in the third quarter of 2003. Additionally, the Company's plan
outlined adjustments to staffing levels at other locations if additional orders
were not received during the third quarter. The Company had $6.8 million
outstanding on the revolving credit facility as of August 2, 2003.
Item 3. Quantitative and Qualitative Disclosures About Market Risk.
Market risk represents the risk of loss that may impact the consolidated
financial position, results of operations or cash flows of the Company. The
Company is exposed to market risk primarily due to fluctuation in interest
rates. The Company does not utilize any particular strategy or instruments to
manage its interest rate risk.
The Company's outstanding credit facility carries an interest rate that varies
in accordance with LIBOR. The Company is subject to potential fluctuations in
its debt service as LIBOR changes. Based on the amount of the Company's
outstanding debt as of June 30, 2003, a hypothetical 1% change in the interest
rate of the Company's outstanding credit facility would result in a change in
annual interest expense of approximately $0.3 million.
Item 4. Controls and Procedures.
As of June 30, 2003, the Company's management, under the supervision of its
Chief Executive Officer and Chief Financial Officer, have evaluated the
effectiveness of the design and operation of the Company's disclosure controls
and procedures (as defined in Exchange Act Rules 13a-14 (c) and 15d-14 (c) under
the Securities Exchange Act of 1934).
Prior to and during this evaluation, certain significant deficiencies in
internal controls existed related to the accounting for inventory that could
adversely affect the Company's ability to record, process, summarize, and report
financial information in a timely manner. These deficiencies relate primarily to
the decentralized nature of accounting for inventory, including:
o Limited information technology resources for valuation,
o Insufficient review of inventory accounts, and
o Inconsistent application of accounting policies and related controls by
operating units.
The following ongoing initiatives have been undertaken to correct the
deficiencies in internal controls noted above:
o Additional analysis and reconciliation procedures have been implemented
related to inventory valuation
o Corporate oversight of the controls and procedures in place over
inventory has been increased and staffing has been added.
o The Company has initiated a project to examine its inventory policies,
document controls and procedures in a written manual, and conform
practices at all of its operating units. This project will be
incorporated into the analysis of internal controls as established
under Sarbanes-Oxley Section 404.
o Management has completed the necessary account analysis and review
prior to finalizing inventory valuation in its June 30, 2003 financial
statements.
Management, including the Chief Executive Officer and Chief Financial Officer,
believes the results of the corrective actions begun by the Company in April
2003, as outlined above, are effective in addressing the significant
deficiencies in internal controls over inventory. Except for the disclosure
above, the Chief Executive Officer and Chief Financial Officer have concluded
that the Company's disclosure controls and procedures are effective in all
material respects in ensuring that material information required to be disclosed
in the periodic reports the Company files with the Securities and Exchange
Commission is recorded, processed, summarized and reported in a timely manner.
Subsequent to the date of the evaluation, the Company's Chief Executive Officer
and Chief Financial Officer have concluded that there were no other significant
changes in internal controls.
PART II
OTHER INFORMATION
Item 4. Submission of Matters to a Vote of Security Holders.
(a) The 2003 annual meeting of stockholders was held on June 27, 2003.
(b) Thomas Unger was elected as a director at the 2003 annual meeting.
Directors whose terms of office continue after the special meeting are
the following:
Ronald S. Saks Joseph Burstein
Brian D. Geary Sanford S. Neuman
Duane E. Hahn
(c) The following table gives a brief description of each matter voted upon at
the above-referenced annual meeting and, as applicable, the number of votes
cast for, against or withheld, as well as the number of abstentions and
broker non-votes:
Broker
Description For Against Withheld Abstentions Non-votes
1. Election of Director: 7,634,622 31,150 N/A N/A N/A
Thomas Unger
2. Ratification of the appointment of
Ernst & Young LLP as the Company's
independent auditors 7,638,472 18,000 N/A 9,300 N/A
------------------------
N/A = Not Applicable
Item 6. Exhibits and Reports on Form 8-K.
(a) Exhibits:
Exhibit Number Description
31.1 Rule 13a-14(a) Certification of Ronald S. Saks, President
and Chief Executive Officer.
31.2 Rule 13a-14(a) Certification of Lawrence E. Dickinson,
Secretary and Chief Financial Officer.
32 Certification pursuant to 18 U.S.C. Section 1350 as adopted
pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
(b) The Company filed the following reports on Form 8-K during the quarter
ended June 30, 2003:
(i) On April 23, 2003, the Company filed a Report on Form 8-K
reporting the Eleventh Amendment entered into by the Company
and Union Planters Bank, N.A. (the "Bank"), to the Loan
Agreement dated as of August 15, 1996 between Leonard's Metal,
Inc., the predecessor in interest to the Company, and Magna
Bank, National Association, the predecessor in interest to the
Bank;
(ii) On April 30, 2003, the Company filed a Report on Form 8-K
reporting the resignation of Thomas M. Gunn, a member of the
Company's Board of Directors since 1998, effective April 21,
2003;
(iii) On May 29, 2003, the Company filed a Report on Form 8-K
reporting the filing of an amendment on Form 10-K/A on May 29,
2003, to correctly reflect the amount of its long-term
liabilities of its Consolidated Balance Sheet for the year
ended December 31, 2002 due to a typographical error.
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the
registrant has duly caused this report to be signed on its behalf by the
undersigned thereunto duly authorized.
LMI AEROSPACE, INC.
Date: August 14, 2003 By: /s/ Lawrence E. Dickinson
----------------------------------------
Lawrence E. Dickinson
Chief Financial Officer and Secretary
EXHIBIT INDEX
Exhibit
Number Description
31.1 Rule 13a-14(a) Certification of Ronald S. Saks, President
and Chief Executive Officer.
31.2 Rule 13a-14(a) Certification of Lawrence E. Dickinson,
Secretary and Chief Financial Officer.
32 Certification Pursuant to 18 U.S.C. Section 1350 as adopted
pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.