================================================================================
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934 (NO FEE REQUIRED)
FOR THE FISCAL YEAR ENDED JUNE 30, 2002
OR
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934
For the transition period from __________ to __________
COMMISSION FILE NUMBER 000-27548
LIGHTPATH TECHNOLOGIES, INC.
(Exact name of registrant as specified in its charter)
DELAWARE 86-0708398
(State or other jurisdiction of (I.R.S. Employer
incorporation or organization) Identification No)
http://www.lightpath.com
3819 OSUNA, NE 87109
ALBUQUERQUE, NEW MEXICO (Zip Code)
(Address of principal executive offices)
Registrant's telephone number, including area code:
(505) 342-1100
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT: NONE
SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT:
CLASS A COMMON STOCK, $.01 PAR VALUE
Indicate by check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities and Exchange Act
of 1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days. YES [X] NO [ ]
Check if there is no disclosure of delinquent filers in response to Item
405 of Regulation S-B contained in this form, and no disclosure will be
contained, to the best of registrant's knowledge, in definitive proxy or
information statements incorporated by reference in Part III of this Form 10-K
or any amendment to this Form 10-K. [X]
The registrant's operating revenue for its most recent fiscal year.
$12,506,582
The aggregate market value of the registrant's voting stock held by
non-affiliates (based on the closing sale price of the registrant's Common Stock
on the Nasdaq National Market, and for the purpose of this computation only, on
the assumption that all of the registrant's directors and officers are
affiliates) was approximately $11,938,915 on August 1, 2002.
The number of shares outstanding of each of the issuer's classes of common
stock, as of the latest practical date:
Common Stock, Class A, $.01 par value 20,677,071 shares
CLASS OUTSTANDING AT AUGUST 23, 2002
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Registrant's Proxy Statement for the 2002 Annual Meeting of
Stockholders are incorporated by reference into Part III of this report.
================================================================================
LIGHTPATH TECHNOLOGIES, INC.
FORM 10-K
INDEX
ITEM PAGE
---- ----
PART I
Description of Business 2
Description of Property 32
Legal Proceedings 32
Submission of Matters to a Vote of Security Holders 33
PART II
Market for Common Equity and Related Stockholder Matters 34
Selected Financial Data 36
Management's Discussion and Analysis of Financial Condition
and Results of Operations 38
Quantitative and Qualitative Disclosure About Market Risk 49
Financial Statements and Supplementary Data 49
Changes in and Disagreements with Accountants on Accounting
and Financial Disclosure 49
PART III
Directors and Executive Officers,
Compliance with Section 16(a) of the Exchange Act 50
Executive Compensation 53
Security Ownership of Certain Beneficial Owners and Management 53
Certain Relationships and Related Transactions 53
Exhibits, Financial Statement Schedules, and Reports on Form 8-K 54
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS F-1
SIGNATURES 56
CERTIFICATION 57
1
LightPath Technologies, Inc. - Form 10K, June 30, 2002
PART I
ITEM 1. DESCRIPTION OF BUSINESS.
GENERAL
LightPath is a manufacturer of families of high-performance fiber-optic
collimator and isolator products, GRADIUM(R) glass lenses and other optical
materials used to produce products that manipulate light. We operate through two
operating segments; optoelectronics and fiber telecommunications ("telecom"),
and traditional optics (e.g. lenses used in lasers, data storage, bar coding,
medical equipment, consumer optics, etc.). We manufacture and sell the following
types of telecom products: (i) collimators, (ii) isolators and (iii) molded
aspheric lenses. Collimators are assemblies that are used to straighten and make
parallel diverging light as it exits a fiber. An isolator is used to prevent the
back reflection of optical signals that can degrade transmitter and amplifier
performance. Molded aspheres are used in telecom applications to couple laser to
fiber, fiber to fiber and fiber to other optical devices. Collimators,
isolators, molded aspheres and other optical components are used throughout
fiber optic systems. Such systems are used by the telecommunications industry
with a goal of increased bandwidth, through the development of all optical
networks, by combining multiple light streams from individual transmissions onto
a single optical fiber. We are also planning to develop other products related
to the optoelectronics and telecommunications industry through licenses and
relationships with other manufacturers. SEE "CURRENT FOCUS ON PRODUCTS" BELOW.
LightPath was incorporated under Delaware law in June 1992 as the successor
to LightPath Technologies Limited Partnership, a New Mexico limited partnership
(the "Partnership"), formed in 1989, and its predecessor, Integrated Solar
Technologies Corporation, a New Mexico corporation ("ISOTEC"), organized in
1985.
From our inception in 1985 until June 1996, we were classified as a
development stage enterprise that engaged in basic research and development. Our
initial objective in 1985 was to improve solar energy technology by creating an
optical material that could efficiently bend light from varying angles in order
to track the path of the sun across the sky. During this stage, we believe that
most of our product sales were to persons evaluating the commercial application
of GRADIUM glass (SEE - PRODUCTS: GRADIUM) or using the products for research
and development. In 1987, we realized that our early discoveries had much
broader application, and we expanded our focus to imaging optics applications.
During fiscal year 1997, our operational focus began to shift to product
development and sales. We completed numerous prototypes for production orders
and received catalog sales of standard lens profiles. We also began to offer
standard, computer-based profiles of GRADIUM glass that engineers use for
product design.
In fiscal year 1998, we began to explore the development of products for
emerging markets such as optoelectronics, photonics and solar due to the number
of potential customer inquiries into the ability of GRADIUM glass to solve
optoelectronic problems, specifically in the areas of fiber telecommunications.
In 1998, the resolution of packaging and alignment issues, along with advances
made by LightChip Inc. ("LightChip") with WDM equipment, led us to develop a
strategy to enter the telecom optical components market. This strategy is built
around automated production of telecom components using laser fusion and fiber
attachment techniques we developed. We also maintained our emphasis on optical
materials where we gained expertise during the development of GRADIUM glass.
During fiscal 1998, sales of lenses to the traditional optics market continued
with increases in sales of lenses used in the YAG laser market, catalog and
distributor sales and lenses used in the wafer inspection markets. During this
time, we reorganized internally and realigned our marketing efforts with the
purpose of expanding our focus to include the optoelectronics and fiber
telecommunications markets in addition to the traditional optics market. See
"Sales and Marketing - Optoelectronics and Fiber Telecommunications."
In designing our optoelectronic devices, we focused on automation of the
manufacturing process. Although many other manufacturers in this industry rely
on offshore production to control costs, we believe that automation of the
2
LightPath Technologies, Inc. - Form 10K, June 30, 2002
manufacturing process can yield significant costs savings over the long term.
Our patented laser fusion and fiber attachment techniques are highly automated,
and we believe these techniques provided improved quality and flexibility to
increase manufacturing capacity in response to growth in demand. Our automation
concept was expanded upon with our fiscal 2000 acquisition of Horizon Photonics,
Inc. ("Horizon") where we employ the use of robotic systems in manufacturing of
isolators.
In April 2000, we acquired Horizon, a California corporation originally
founded in July 1997. Horizon utilizes automated production platforms to
manufacture passive optical components for the telecommunications and data
communications markets. We acquired all of the outstanding shares of Horizon for
approximately 1.4 million shares of Class A Common Stock and $1 million in cash
(an aggregate purchase price of approximately $40.2 million, based on the
trading price of our common stock). Horizon manufactures isolator products at
their Walnut, California facility.
In September 2000, we acquired Geltech, Inc. ("Geltech"), a Delaware
corporation originally founded in May 1985. Geltech is a manufacturer of
precision molded aspheric optics used in the active telecom components market to
provide a highly efficient means to couple laser diodes to fibers or waveguides.
Geltech also produces lens arrays for optical switches and other applications.
We acquired all of the outstanding shares of Geltech for an aggregate purchase
price of approximately $28.5 million, comprised of 822,737 shares of Class A
common stock (valued at $27.5 million based on the trading price of our common
stock) and approximately $1 million in acquisition costs. Geltech manufactures
products at its facilities in Orlando, FL. During fiscal 2002, Geltech expanded
its manufacturing facility, which will include integrating some of the
automation techniques utilized at our other facilities.
Our first significant dealings in the telecommunications segment began in
June 1997, when we announced we had joined with Invention Machine Corporation to
form a joint venture company, LightChip, to develop, manufacture and market the
next generation of wavelength division multiplexing ("WDM") systems for use by
telecommunication carriers, CATV companies, local area networks and wide area
networks system integrators. WDM systems are needed by the telecommunications
industry to increase bandwidth by combining multiple light streams from
individual transmissions onto a single optical fiber. We formed LightChip in
order to serve the growing metro WDM market. Since 1998, LightChip has received
approximately $91 million from the issuance of common stock and four series of
convertible preferred stock. The initial investors included AT&T Ventures and
LightPath. Subsequent investors also include Morgenthaler Ventures, J.P. Morgan
Capital and Berkeley International. Our current percentage ownership of
LightChip is approximately 13% of total preferred and common shares. LightChip
successfully demonstrated a WDM model and had prototypes of several products
available in fiscal 2000. LightChip's first product sales occurred in calendar
2001. We licensed the use of GRADIUM glass to LightChip for specific
applications. We anticipate no short-term revenue from LightChip. In May 2002 we
wrote down our investment in LightChip by $6.3 million to reflect pricing of an
equity round of financing at a price per share that was lower than the carrying
value of LightPath's investment in LightChip. The telecommunications market has
been severely depressed and valuations of start up companies have decreased
dramatically. If further funding is at a rate lower than the cost of our
previous investment in LightChip we will be required to write down our
investment to the current market value. LightChip's business is at an early
stage, and the volatile nature of the telecommunications industry makes our
investment in LightChip subject to significant risks and uncertainties.
OPERATING SEGMENTS AND PRODUCTS
We manufacture and sell the following types of telecom products: (i)
collimators, (ii) isolators and (iii) molded aspheric lenses and (iv) modules.
We also manufacture traditional optics products including: (i) GRADIUM glass
products, lenses, prisms and (ii) molded aspheric lenses. GRADIUM glass is an
optical quality glass material with varying refractive indices used for optics
such as lenses for YAG lasers. Molded aspheres are used in non-telecom
applications such as optical data storage, high precision printing, bar coding
and by manufacturers of medical equipment.
3
LightPath Technologies, Inc. - Form 10K, June 30, 2002
COLLIMATORS
We offer two product levels of collimators:
- collimating lenses; and
- standard collimators.
COLLIMATING LENSES
We offer two types of lenses for use in telecommunication applications: TL
and GPX-series. Our TL-series lenses are 1.8 mm diameter collimating, rod lenses
and are available in 0.18, 0.23 and 0.25 pitch-equivalent lenses. These lenses
have an optional angles facet to control back reflection and for ease of
assembly. Our TL-series lenses provide a high degree of collimation, design
customization, and have tight piece-to-piece control. Customized TL-series
lenses with larger diameters can provide beam diameters greater than 2 mm. Our
GPX series lenses are available in a wide variety of sizes and focal lengths.
These lenses provide high quality aberration control and are easily customized.
They are sold separately for assembly into customers' components and are also
incorporated into our large beam collimator. These GRADIUM collimating lenses
can replace homogeneous lenses with, in many cases, immediate improvements in
performance, repeatability and cost.
STANDARD COLLIMATOR
We demonstrated our first passive optoelectronic product, a single mode
fiber collimator assembly ("SMF Assembly") in February 1998. Our SMF Assembly
and subsequently improved versions of the standard collimator which offer high
quality performance in the areas of back reflection and insertion loss. It is
also more compact and we believe it can be manufactured at a significantly lower
cost than the competitive products currently available in commercial quantities.
The collimator is a key element in all fiber optic systems, including WDM
equipment. Collimators straighten and make parallel, diverging light as it exits
a fiber. Our standard collimator provides high quality performance in back
reflection and insertion loss and can withstand in excess of 10 watts of optical
power. This entry level product currently used by the telecommunications
industry prevents light from diverging as it exits a fiber, and shepherds it
into the next piece of equipment or fiber.
ISOLATORS
We have developed a family of products that utilize a proprietary
micro-fixture design and robotic platform process. This automated process allows
for micro-optics to be mounted in small transferable fixtures that are processed
in arrays and converted into a variety of optical components and component
subsystems. Our platform is capable of producing products such as isolators,
gain flatteners, attenuators, filter assemblies, and other volume-oriented optic
assemblies for the WDM market. To date, we are manufacturing a qualified family
of free-space, laminate and contract-specific isolators. In 2001, we released a
new line of isolator assemblies for application in the metro and access telecom
markets. This line is based on a flexible manufacturing platform which can
address a wide range of customer specifications while supporting lower cost
applications.
The optical isolator is used to prevent the back reflection of optical
signals that can degrade transmitter and amplifier performance. We have
developed and qualified an automated platform process that avoids the
traditional pitfalls of producing optical isolators. Applicable to a variety of
passive optical components, our automated platform process has proven to be an
efficient and low cost method for manufacturing isolators without machining tiny
metal fixtures and without utilizing a significant level of manual labor. We
believe our isolator has a competitive advantage for a certain segment of OEM
business, since our proprietary platform allows us to produce unique designs at
competitive prices in a flexible, automated process.
4
LightPath Technologies, Inc. - Form 10K, June 30, 2002
MOLDED ASPHERES, MOLDED LENS ARRAYS AND DIFFRACTION GRATINGS
The telecom industry has a need for molded aspheres for laser-to-fiber
coupling, tunable lasers, DFB lasers and device coupling. Corning Inc. developed
the technology we employ for molding a proprietary low melting temperature glass
into an asphere lens. With our September 2000 acquisition of Geltech, LightPath
obtained the process, key personnel and equipment, and also secured a perpetual
license to all Corning's intellectual property associated with the development
of precision molded optics. We have continued to refine the process and develop
the markets for aspheric lenses.
Our focus is on providing custom optical solutions to meet unique customer
needs in the rapidly changing telecommunications market as well as extending our
customer base in markets outside of telecom. We provide aspheric lenses of sizes
up to 15mm, and we are a developer of sub-millimeter optics.
We have also developed a line of molded lens arrays. We have developed a
process to mold lens arrays capable of producing optical components with very
small lens diameters and very high lens density (for example, 40,000 optical
elements in a two-inch diameter array).
Although we have a unique and proprietary line of all-glass diffraction
gratings (StableSil(R)) for telecom applications, there currently is no
significant activity in the market for this product line and we have
discontinued further development efforts in this area.
MODULES
We have introduced a number of modules which will combine two or more of
our current components, such as the isolator and molded aspheres, into a
subassembly. During fiscal 2002 we began to expand modules offerings and to
automate the manufacturing of modules to take advantage of low cost assembly.
Current passive optical modules include the OASIS(TM) and Vectra(TM) collimator
arrays. The expansion of these modules will continue into fiscal 2003.
GRADIUM
GRADIUM glass is an optical quality glass material with varying refractive
indices, capable of reducing optical aberrations inherent in conventional lenses
and performing with a single lens tasks traditionally performed by multi-element
conventional lens systems. We believe that GRADIUM glass lenses provide
advantages over conventional lenses for certain applications. By reducing
optical aberrations and the number of lenses in an optical system, we believe
that GRADIUM glass can provide more efficient light transmission and greater
brightness, lower production costs, and a simpler, smaller product. While we
believe that other researchers have sought to automate production of passive
optical components and to produce optical quality lens material with the
properties of GRADIUM glass, we are not aware of any other person or firm that
has developed a repeatable manufacturing process comparable to our abilities or
with the ability to produce such material on a prescribable basis.
PRODUCTS IN DEVELOPMENT
The current focus of our development efforts has been to develop new
products based on our optical and automation platforms in the areas of
isolators, optical subassemblies, micro-collimators and lens arrays for use in
the telecommunications field, and other markets which use optical components.
Our original process patent is for producing an optical quality material,
GRADIUM glass, with an "axial" gradient refractive index (i.e., the index
gradient runs parallel to the optical lens axis, rather than perpendicular to
the lens axis or "radial"). The GRADIUM glass designated curve is achieved by
the controlled combination of multiple glass optical densities. We have
developed a set of proprietary software design tools so that the light upon
leaving the glass can be precisely modeled. GRADIUM glass lenses can be produced
across a large diameter range (currently 1mm-100mm). Growth in our manufacturing
capabilities has led to improved yield and automation, advancing our goal of
producing competitively priced products.
5
LightPath Technologies, Inc. - Form 10K, June 30, 2002
We were issued a patent in fiscal year 2000 for the development of a
process utilizing high-powered lasers for fusion, splicing and polishing of
optical material to include optical fiber. This patent is the basis of our
collimator production technology.
We were issued our first of three patents relating to our robotic assembly
platform used for the manufacturing of isolators in fiscal year 2001 and have
several other patents in process.
We have approximately 50 US and foreign patents in the areas of precision
molded optics and Sol-Gel technologies. We also hold the right to certain
materials we believe are key to the development of high precision molded optics.
In addition, we utilize other optical materials and specialized optical
packaging concepts to manipulate light and perform research and development for
optical solutions in the fiber telecommunications and traditional optics
markets.
MODULES
During fiscal 2001, we introduced a number of modules which will combine
two or more of our current components, such as the isolator and molded aspheres,
into a subassembly. During fiscal 2002 we began to expand modules offerings and
to automate the manufacturing of modules to take advantage of low cost assembly.
Current passive optical modules include the OASIS(TM) and Vectra(TM) collimator
arrays. The expansion of these modules will continue into fiscal 2003. Demand
for modules is driven by specific customer needs. Utilizing automation
techniques, we are able to provide active alignment of multiple components and
deliver a subsystem optimized for the customers unique needs with very low
insertion loss.
SWITCHES AND COLLIMATOR ARRAYS
During fiscal 2002, we had planned on shipment of the 1XN opto-mechanical
switch based upon a patent licensed from Herzel Laor. Due to the current
economic environment, we elected to suspend expenditures required to launch this
product in fiscal 2002. We will concentrate instead on development of further
enhancements to existing product lines.
Using the automated alignment techniques learned in production of the 1XN
opto-mechanical switch, we proceeded with the development of collimator arrays.
We successfully shipped prototypes of this product in the fourth quarter of
fiscal 2002 and intend to expand in this area in fiscal 2003.
SOL-GEL TECHNOLOGY
We have developed a replication process to manufacture glass diffractive
optical components using Sol-Gel technology. This process allows the fabrication
by replication of these complex optics at a fraction of the cost of conventional
technologies such as photolithography and reactive-ion etching. In addition, we
have produced other Sol-Gel based components including the high volume
manufacture of silica substrates for optically active windows used in toxic gas
detection and the development and production of unique solid-state calibration
filters. We have practiced Sol-Gel technology for several years and have
successfully addressed many different markets over the years. We have
significant knowledge in this field with protection through extensive know-how,
trade secrets, and 7 issued patents.
In 2000, we introduced a line of all-glass gratings in response to the
anticipated demand from the telecommunications industry for the fabrication of
DWDM and other devices requiring high performance and sturdy gratings. These
all-glass gratings present significant advantages over available gratings due to
outstanding environmental resistance, high performance and low cost.
6
LightPath Technologies, Inc. - Form 10K, June 30, 2002
Although we continued to pursue the development of additional products
based on Sol-Gel technology and had included in our new product plans inorganic
waveguides, active waveguides and arrayed waveguide gratings to be used in
telecommunications applications, we have delayed these development efforts due
to the current economic environment. We have elected to delay expenditures
required to launch these products until we see a substantial increase in demand
from our customers and the market.
BUSINESS STRATEGY
Our management and marketing focus historically has been organized with the
intent of serving two separate markets: (1) optoelectronics and fiber
telecommunications ("telecom"), and (2) traditional optics (e.g. lenses used in
lasers, data storage, bar coding, medical equipment, consumer optics, etc.). We
believe that GRADIUM glass and other optical materials can potentially be
marketed for use in many optics and optoelectronics products.
During the last 18 months, the telecom equipment market has slowed
dramatically, including the optical components segment of the market. As service
providers rapidly cut their capital spending budgets, inventories of hardware
systems, subsystems, and components grew quickly due to a lag in vendors
adjusting their build rates to the downturn in demand. Although inventories are
believed to be dropping, there is still a sizeable inventory of components that
must be consumed before supply and demand come back in balance. We believe this
reduction in demand for telecom components will continue into fiscal 2003,
therefore, we are adjusting our business plans.
In June 2002 we announced plans for fiscal 2003 where we intend to
consolidate lens product lines in Florida and reorganize internally into three
groups; the Optical Lens Group; the Laser Component Group; and the Optical
Integration Group. The Optical Lens Group will manage the collimator and
aspheric lens products, which continues as the core capability for LightPath.
These product lines will be consolidated in the Orlando, Florida facility. We
believe the aspheric lens product line, in particular, has broad applicability
to market segments beyond telecom. We are aggressively pursuing new
opportunities in the application areas of medical devices, barcode scanners,
optical data storage, machine vision, sensors, and environmental monitoring.
In response to our customers' requirements for a second site capability and
optical packaging solutions, we intend to increase our emphasis on the
integrated platform segment of our business within the Laser Component Group. We
have had great success with our isolator product line, and as our customers ask
for more demanding optical performance we see a great opportunity to provide the
entire solution from laser to fiber. The Laser Component Group will be investing
a modest amount in capital expenditures and research and development, in support
of optical generation and detection applications, such as transmitters,
transceivers and pumps. The Optical Integration Group will allow LightPath to
augment current passive optical packages such as OASIS(TM) and Vectra(TM)
collimator arrays with new innovative passive optical modules, such as multiport
and hybrid devices, to provide effective optical management solutions for our
customers.
OPTOELECTRONICS AND FIBER TELECOMMUNICATIONS (TELECOM PRODUCTS)
Optoelectronics technologies consist of an overlap of photonics and
electronics and are key enablers of "Information Age" technologies, such as
fiber optic communications, optical data storage, laser printers, digital
imaging, and sensors for machine vision and environmental monitoring. The
telecom/datacom networks have experienced explosive growth. The dramatic rise of
the Internet, office automation, videoconferencing, local and wide area
networking, and remote access telecommunications has fueled the demand for more
and more network capacity in both long-haul telecommunications and cable
television networks.
Given the inherently faster speed of light signals in fiber-optic networks
and their immunity from electromagnetic interference, fiber-optic systems are
replacing existing copper wire networks for long-haul (more than 600 kilometers)
telecommunications networks. Cable television networks are also shifting to
7
LightPath Technologies, Inc. - Form 10K, June 30, 2002
fiber-optic solutions for the distribution of signals from the broadcast station
to the local cable distribution hubs. Today, fiber-optic cable is the primary
medium for long-haul telecommunications and cable television networks and is
making inroads to replace copper in the shorter distance "metro loops" that
serve larger metropolitan and other public networks with transmission distances
of less than 100 kilometers.
COLLIMATORS
Prior to 1998, we targeted various optoelectronic industry market niches as
potential purchasers of our GRADIUM glass products. During 1998, we began the
development of products for the emerging optoelectronics markets, specifically
in the areas of fiber telecommunications. We demonstrated our first passive
optoelectronic product, the SMF Assembly, in 1998. This product is manufactured
with automated production techniques we developed which utilizes laser fusion
and fiber attachment. During 1999 and 2000, we expanded this product line,
demonstrating to the telecommunication optical components industry that we can
provide low cost products and solutions to meet their telecom-related collimator
needs.
ISOLATORS AND WDM SYSTEMS
The demand for increased bandwidth in fiber-optic networks has led to the
widespread use of a once-theoretical method for transmitting multiple signals at
slightly different wavelengths through a single fiber to achieve efficient use
of fiber capacity. This technique, known as wavelength division multiplexing, or
WDM, requires separate source lasers transmitting slightly different wavelengths
for each signal or "channel" and more complex modulators and optical amplifiers
to control and amplify the signal in the network. WDM systems, originally
developed for eight separate channels in 1996, are currently being designed to
carry as many as 128 separate channels with 0.4 of a nanometer in
differentiation between wavelengths. In theory, a single pair of optical fibers
can carry more than 10 terabits of information per second, which is roughly
equivalent to 156 million voice channels or 500,000 simultaneous two-way HDTV
channels. Through our investment in LightChip, we have positioned ourselves with
products that are designed for use within WDM systems.
With our acquisition of Horizon, we acquired automated production of
passive optical components for the telecommunications and data communications
markets. We believe our primary strength is the design of optical subassemblies
for automation. Our team has a comprehensive background in the field of fiber
optics, taking research efforts "off the bench" and into manufacturing. Drawing
upon years of experience in automation, optoelectronic package design and
testing, and a multitude of technical disciplines, we have demonstrated novel
solutions for today's WDM design and processing challenges. By targeting product
families and creating common platforms for each, we can rapidly tailor
variations within a family, as the customer demands, without major process or
tooling changes. This philosophy is evident in our proprietary micro-fixture
design and automated platform manufacturing process. This platform allows robots
to mount micro-optics in small transferable fixtures that can be processed at
various levels and converted into a variety of finished products. We believe our
isolator has a competitive advantage for a certain segment of OEM business,
since our proprietary platform allows us to produce unique designs at
competitive prices in a flexible, automated process.
In fiscal 2002, we went into production on a new line of isolator
assemblies for application in the metro and access telecom markets. This new
line is based on a flexible manufacturing platform which can address a wide
range of customer specifications while attracting lower cost applications.
ASPHERIC LENSES
Lenses in telecommunications applications perform two major tasks. One is
for the collimation of light as it emerges from the fiber. This collimated light
then passes through multiple components including isolators, filters, and a
second collimator, before returning back into a fiber. The second major task is
coupling light at the output of a laser diode to a fiber or waveguide. Aspheric
lenses and lens arrays are used in both of these configurations.
8
LightPath Technologies, Inc. - Form 10K, June 30, 2002
Telecom products manufactured using this technology include aspheric
lenses, sub-millimeter lenses and lens arrays. Several new products using this
technology are under development. These new products include low-cost aspheric
lenses, anamorphic lenses, cross cylinder lenses and multifunctional optical
components. All of these products also have key relevancy for many different
market applications outside of the telecommunications market.
SWITCHES
In 1999, we entered into an exclusive licensing agreement with Herzel Laor
for the commercialization of two fiberoptic opto-mechanical switch technologies.
In August 2000 we introduced the LP1600 opto-mechanical switch. The LP1600 is a
1xN optical switch, which is designed to route one incoming fiber into
one-of-many output fibers. The current design allows customers to select custom
configurations of 4 to 24 output channels. The LP1600 had patent applications
filed and was sold in small quantities in fiscal 2002. We planned to manufacture
the LP1600 at our Albuquerque locationhowever, due to the current economic
environment we suspended expenditures required to launch this product in fiscal
2002.
OTHER PRODUCTS
We are currently developing additional optoelectronics products based on
our proprietary technologies. Key strategic alliances with technology and
marketing partners to design, build and sell next generation integrated
components and devices may be considered in the future. However, we do not
currently have any agreements, other than those discussed above, to enter into
any strategic alliances for this purpose.
TRADITIONAL OPTICS
LASER MARKETS FOR GRADIUM LENSES
We initially emphasized laser products because we believed GRADIUM lenses
could have a substantial immediate commercial impact in laser products with a
relatively small initial investment. The majority of lens sales is due to optics
used by YAG lasers. Generally, optical designers can substitute our standard
GRADIUM glass components for existing laser lens elements. Lasers are presently
used extensively in a broad range of consumer and commercial products, including
fiber optics, robotics, wafer chip inspection, bar code reading, document
reproduction and audio and video compact disc machines. Because GRADIUM glass
can concentrate light transmission into a much smaller focal spot than
conventional lenses, we believe, and customers test results confirm, that
GRADIUM glass has the ability to improve the current standard of laser
performance. In 1998, our distributor, Permanova Lasersystems AB of Sweden,
completed a lengthy trial and testing period on GRADIUM YAG lenses which they
qualified into systems produced by Rofin-Sinar GmbH, a major OEM manufacturer of
high-powered CO2 and YAG lasers, headquartered in Germany.
Our growth strategy is to increase our emphasis on key laser market niches
and establish the necessary products and partnership alliances to sell into
Europe and Asia as well as the U.S. market. During fiscal 1999, LightPath and
Rodenstock Prazisionsoptik GmbH (Rodenstock) executed an agreement to transfer
to Rodenstock the exclusive, application-related utilization and distribution of
GRADIUM lenses throughout Europe. The agreement was for an initial five-year
period. Rodenstock sold their precision optics division to Linos AG, a pioneer
in the field of photonics, in June 2000. We believe our agreement and
relationships will continue to grow under the Linos AG/Rodenstock alliance. We
also have established relationships with eight additional foreign distributors.
MOLDED ASPHERES
Through our acquisition of Geltech, we purchased the rights to the
Precision Molded Optics process. Our traditional optics product applications are
molded aspheres used in optical data storage, high precision printing, bar
coding and by manufacturers of some medical equipment.
9
LightPath Technologies, Inc. - Form 10K, June 30, 2002
ORIGINAL EQUIPMENT MANUFACTURERS ("OEMS")
In addition to laser applications, through our printed and Internet on-line
catalog, we offer a standard line of GRADIUM glass lenses for broad-based sales
to optical designers developing particular systems for OEMs or in-house
products. Because complex systems contain many optical components, and GRADIUM
glass lenses can be utilized to reduce the number of lens elements in such
systems, we believe that GRADIUM glass lenses can simplify the design and
improve the performance of complex optical systems. However, design and
production of an optical product is a lengthy process, and it may take years for
producers to redesign complex optical systems using GRADIUM glass, reconfigure
the product housing, re-engineer the assembly process and commence commercial
quantity orders for GRADIUM glass components. Accordingly, we intend to focus
our long-term marketing efforts on emerging industries, such as optoelectronics
and fiber telecommunications designed in next-generation optical systems, and
performance driven industries that are seeking to optimize performance of
existing optical products.
We believe OEM relationships may improve our ability to develop more
sophisticated technology development methods and products, although there can be
no assurances in this regard. Such OEM relationships have been utilized in the
development of prototype lenses for manufacturers of endoscopes and wafer chip
inspection equipment. We will evaluate future OEM projects based on a number of
factors, including our assessment of the OEM's ability to fund the design effort
for the project and expected impact upon future sales.
SALES AND MARKETING
Extensive product diversity and varying levels of product maturity
characterize the optics industry. Product markets range from consumer (e.g.,
cameras, copiers) to industrial (e.g., lasers, data storage), from products
where the lenses are the central feature (e.g., telescopes, microscopes) to
products incorporating lens components (e.g., robotics, semiconductor production
equipment). Emerging technology markets require optics for bandwidth expansion
and data transfer improvement in the drive to achieve an all optical network. As
a result, the market for our products is highly segmented and no single
marketing approach will allow us to access all available market segments.
Since fiscal 1998, our primary marketing objective has been the development
and marketing of passive components for the optoelectronics segment of the
telecommunications industry and laser based products in the general optics
product arena. The narrowing of our product focus was in response to the
opportunities in the emerging optoelectronics market where we believe we have
key advantages and our success in sales of laser based products. We believe our
key advantages are:
- we have developed packaging solutions for optoelectronic products;
- we have been able to develop patentable processes with optical
materials that provide product solutions; and
- through automation, we have developed low cost production techniques.
Combining these elements, we believe we have the opportunity to enter into key
optical telecommunications markets with products that are enabling and cost
effective. Although the same design constraints and technological shortcomings
of conventional optical technology and materials restrict all optical products,
we believe that our proprietary manufacturing processes, as well as the high
quality associated with GRADIUM glass, results in a competitive advantage over
other glass products currently available in our targeted markets. With our
acquisitions, we have added to our line of passive optical components while
maintaining our emphasis on low cost production from automation, and added a
product line sold into the active optical component markets as well as products
to be sold into DWDM systems.
10
LightPath Technologies, Inc. - Form 10K, June 30, 2002
OPTOELECTRONICS AND FIBER TELECOMMUNICATIONS
In order to be more accessible to potential customers we have divided our
sales staff into the following territorial areas because of their high
concentrations of telecom users:
- NorthWest
- SouthWest
- MidWest
- SouthEast
- NorthEast
In addition, we have formalized relationships with eight industrial,
optoelectronics and medical component distributors located in foreign countries
to assist in distribution of telecom products outside the United States. Because
the optics industry is highly fragmented, we utilize distributors and our
Internet site (www.lightpath.com) as vehicles for broader promotion of our
telecom products. We have placed, and will continue to place, print media
advertisements in various trade magazines and will participate in appropriate
domestic and foreign trade shows.
The target market for our current products is concentrated within several
industry experts such as Corning, Inc., JDS Uniphase Corporation and Alcatel
Optronics. The lens and standard collimator are used in free space applications
where coupling to an optical fiber is required. We are developing these initial
products into families of products as variations are made to meet specific
customer requirements. Our focus will be on the standard collimator as we
believe that the standard collimator will replace the collimating lens in many
applications.
Since many of our targeted customers currently assemble their own
collimators, our sales approach will be to highlight the standard collimator
price/performance ratio (value) and compare that to the customer's internal
costs plus their lost opportunity cost. During fiscal 2001, our large beam
collimator was selected as the primary customized collimator built specifically
for Corning's PurePath(TM) Wavelength Selective Switch. This product utilizes
both a GRADIUM lens and a standard collimator which takes advantage of the
unique properties of both components.
Telecom product sales for fiscal years 2002, 2001, and 2000 were
approximately $8.3 million, $21.1 million, and $1.5 million, respectively,
primarily generated by targeting our sales efforts on collimators and isolators,
entry level products currently used by the telecommunications industry. Our
major telecom customers in fiscal 2002, 2001 and 2000 included Finisar Corp.,
Agere Systems, Inc., Lucent, Inc., Corning, Inc. and JDS Uniphase Corporation.
Our marketing plan for isolators targets niche players in the
telecom/datacom markets with high volume potential for the next decade.
Specifically, we are focusing on the following market segments: (i) WDM
long-haul system manufacturers, (ii) cable television carrier system
manufacturers, (iii) "metro loop" system manufacturers, and (iv) Fiber
Channel/Gigabit Ethernet system manufacturers. The largest isolator customers
were Finisar Corp. with sales of approximately $2.4 million in fiscal 2002, and
Agere Systems, Inc. ("Agere") (formerly the Microelectronics division of Lucent
Technologies Inc.) with sales of $11.4 million and $900,000 in fiscal 2001 and
2000, respectively. These customers represent two platforms: free space
isolators and a low-cost isolator platform to be used in the metro access
markets.
Our marketing plan for molded aspheres targets the asphere lenses used with
DFB lasers and tunable lasers, major customers being Alcatel and other telecom
companies. In addition, we are focusing on several high volume non-telecom
opportunities in defense, medical devices, other laser applications as well as
data storage.
In addition to our telecom products business, we are planning to provide
modules where several of our components are integrated with automation to
provide a subassembly to the customer. We have introduced a number of modules
which will combine two or more of our current components, such as the isolator
and molded aspheres, into a subassembly. During fiscal 2002 we began to expand
11
LightPath Technologies, Inc. - Form 10K, June 30, 2002
modules offerings and to automate the manufacturing of modules to take advantage
of low cost assembly. Current passive optical modules include the OASIS(TM) and
Vectra(TM) collimator arrays. We believe these modules have the potential to
provide higher gross profit margins than the individual components. We are also
addressing our customers DWDM needs by focusing our development team efforts on
a "micro-collimator" assembly to target numerous requests for manufacturing
services related to collimating packages. Our micro lens array has application
in optical switching, waveguide coupling and fiber array coupling. Generally,
inquiries for these products have been coming from producers of next generation
switches, MEMS and other optical devices requesting assistance with packaging
and volume production.
STRATEGIC ALLIANCES
WDM MODEL AND DWDM PROTOTYPES
Since fiscal 1997, we have entered into strategic alliances with other
companies in an effort to quickly enter into the optoelectronics markets. For
example, we currently own approximately 13% of the preferred and common shares
outstanding of LightChip. LightChip successfully demonstrated a WDM model and
DWDM prototypes with product sales beginning in calendar 2001. We licensed the
use of GRADIUM glass, as well as any newly developed intellectual property, in
the field of fiber-optic communication systems, components and devices to
LightChip. We have retained the rights to the specific areas of fiber
collimators, isolators, amplifiers, circulators, couplers, splitters and
fiber-optic switches.
SWITCHES
In 1999, we entered into an exclusive licensing agreement with Herzel Laor
for the commercialization of two fiberoptic opto-mechanical switch technologies.
In August 2000 we introduced the LP1600 opto-mechanical switch. The LP1600 is a
1xN optical switch, which is designed to route one incoming fiber into
one-of-many output fibers. The current design allows customers to select custom
configurations of 4 to 24 output channels. The Company planned to manufacture
the LP1600, for which patent applications have been filed, at its Albuquerque
location. Due to the current economic environment we elected to suspend
expenditures required to launch this product in fiscal 2002.
TRADE SHOWS
We have displayed our product line additions and enhancements at various
trade shows each year. During the third quarter of fiscal 2002, the Company
announced five new products designed for use in both long-haul and metropolitan
area (metro) networks which we displayed at the March 2002 Optical Fiber
Communication Conference ("OFC") held in Anaheim, California. These five new
products are examples of how we believe LightPath can provide added value to our
customers. Each one utilizes advanced manufacturing technology to `build-in'
much of the optical alignment work that was formerly performed by the customer.
They also underscore LightPath's strategic directive of broadening our base of
innovative optical components and assemblies by combining application specific
engineering with automated manufacturing. These shows provide an opportunity for
us to meet with potential customers, distribute information and samples of our
products and to discuss test results from samples previously sent.
TRADITIONAL OPTICS
Prior to our IPO in 1996, our resources had been applied primarily to
research and development; consequently, LightPath and GRADIUM glass were not
introduced to the commercial market. Promotion of our products through the
Internet, trade advertising in industrial magazines and participation in
numerous domestic and foreign trade shows increased interest and awareness of
our products, resulting in additional lens sales. Traditional optics lens sales
for fiscal years 2002, 2001 and 2000 were approximately $4.2 million, $5.1
million and $768,000, respectively. The growth in 2001 was primarily due to the
12
LightPath Technologies, Inc. - Form 10K, June 30, 2002
acquisition of Geltech's traditional optics business in September 2000, which
accounted for $4 million of traditional optics sales in fiscal 2001. Asphere
products are used in data storage and by manufacturers of medical equipment.
Lens sales are primarily due to sales of lenses for laser and wafer chip
inspection markets. Our sales efforts in targeting laser applications, an area
where GRADIUM lenses increase the quality of YAG laser beams and reduce the
focal spot size, has received market acceptance. Our primary customers in fiscal
2002, 2001 and 2000 included Presstek, Coherent, Gerhard Franck Optronik GmBH
and Permanova Laser Systems AB.
INDUSTRIAL AND OPTOELECTRONIC DISTRIBUTORS IN FOREIGN COUNTRIES
We have formalized relationships with eight industrial and optoelectronic
distributors located in foreign countries. Because the optics industry is highly
fragmented, we utilize distributors and the Internet as vehicles for broader
promotion of GRADIUM glass products. Our Internet web site (www.lightpath.com)
is one source of information on GRADIUM glass, and potential customers can view
products from our catalog. We have placed, and will continue to place, print
media advertisements in various trade magazines and will participate in selected
domestic and foreign trade shows. We have developed a network of selected
independent optical engineering firms to promote the sale of GRADIUM glass
products. Presently, eight optical engineering firms provide such optical design
services and support.
PROMOTIONAL AND EDUCATION ACTIVITIES FOR OPTICAL DESIGNERS
As part of our marketing strategy, we have provided promotional and
educational activities concerning GRADIUM glass and its properties, intended to
familiarize and educate optical engineers from numerous, high performance optics
markets. We presently have six standard profiles of GRADIUM glass that engineers
can use for product design, and we will continue to develop more profiles as
required. Our existing GRADIUM glass profiles are compatible with established
software design programs utilized by optical designers, enabling designers to
integrate GRADIUM glass into their designs. While this enables designers to
incorporate GRADIUM glass into their existing product design, we must increase
familiarity with GRADIUM glass so that designers will be more likely to
incorporate GRADIUM glass in their original designs. If a standard GRADIUM glass
profile is not suited for a specific design, we have the capability to create a
custom GRADIUM glass profile for the customer. Our objective is to educate
optical designers, through the distribution of materials, about the potential of
GRADIUM glass to provide them with additional flexibility and design freedom to
create optical products more efficiently and with enhanced performance.
COMPETITION
OPTOELECTRONICS AND FIBER TELECOMMUNICATIONS
The telecommunications marketplace is renowned for its product quality and
reliability demands. Every item must pass rigorous testing before being designed
into devices and systems. We must establish a reputation as a quality supplier.
The products must perform as claimed so that the customer will not need to test
after the initial qualification, and we must be open to continuous improvement
of our products and processes. If we can pass these tests we believe we can
become a primary or second source supplier to the industry. However, this
industry is subject to, among other risks, intense competition and rapidly
changing technology, and there can be no assurances as to our ability to
anticipate and respond to the demands and competitive aspects of this industry.
COLLIMATORS AND MOLDED ASPHERES
There are currently only a handful of direct competitors for our
collimating lenses and standard collimator. Nippon Sheet Glass currently
supplies the majority of collimator lenses. The collimator lens is a separate
business from Nippon Sheet Glass's primary product, automotive glass. Our
standard collimator competes against existing collimator assemblies, which are
produced by Casix(acquired by JDS Uniphase), DiCon Fiberoptics, Samsung
Electronics, Wave Optics and Oz Optics. There are also a number of companies
that assemble their own collimators, such as Lucent, and JDS Uniphase. These
competitors have greater financial, manufacturing, marketing and other resources
13
LightPath Technologies, Inc. - Form 10K, June 30, 2002
than LightPath. We are aware of current research projects that integrate optical
technologies, such as existing planar waveguide structures, which have the
potential to replace some of the current collimator applications. We believe
that many of these products currently have limitations which have made their
wide spread usage unfeasible, thereby reducing the likelihood that they will
replace current collimator applications in the immediate future.
We compete with Hoya Corporation and Asahi Corporation in the molded
asphere lens market. In addition, for lower performance driven applications,
Geltech competes with manufacturers of plastic aspheres.
ISOLATORS
We compete with a few specific players in the isolator segment of the WDM
components market. These include Namiki, TDK, Tokin, Kyocera, Sumitomo and Kaifa
Technology (acquired by E-TEK/JDS Uniphase). Our strategy does not involve
direct competition with the "catalog" offerings of these companies; rather, we
focus our efforts on designing and manufacturing specialty and hybrid components
according to particular OEM specifications by delivering flexible and novel
packaging solutions achieved by our automated platform.
TRADITIONAL OPTICS
The market for optical components is highly competitive and highly
fragmented. We compete with manufacturers of conventional spherical lens
products and optical components, providers of aspheric lenses and optical
components and producers of optical quality glass. To a lesser extent, we
compete with developers of radial gradient lenses and optical components. Many
of these competitors have greater financial, manufacturing, marketing and other
resources than we do.
Manufacturers of conventional lenses and optical components include
industry giants such as Eastman Kodak Corporation, Nikon, Olympus Optical
Company, Carl Zeiss and Leica AG. In addition to being substantial producers of
optical components, these entities are also some of the primary customers for
such components, incorporating them into finished products for sale to
end-users. Consequently, these competitors have significant control over certain
markets for our products. In addition, although these companies do not
manufacture axial gradient lenses, and although we believe that we have
substantial technological expertise in this field, these companies could rapidly
pursue development of axial gradient products, in light of their substantial
resources. In addition, our products compete with other products currently
produced by these manufacturers.
Manufacturers of aspheric lenses and optical components provide significant
competition for our traditional optics in providing products that improve the
shortcomings of conventional lenses. Aspheric lens system manufacturers include
Eastman Kodak Corporation, Hoya Corporation, Schott Glass, Hikari Glass Co.,
Ltd. and U.S. Precision Lens. The use of aspheric surfaces provides the optical
designer with a powerful tool in correcting spherical aberrations and enhancing
performance in state-of-the-art optical products. But the nonspheric surfaces of
glass "aspheres" are difficult to fabricate and test, are limited in diameter
range and induce light scatter. Plastic molded aspheres, on the other hand,
allow for high volume production, but primarily are limited to low-tech consumer
products that do not place a high demand on performance (such as plastic lenses
in disposable cameras). Molded plastic aspheres appear in products that stress
weight, size and cost as their measure of success.
To a lesser extent, we compete with manufacturers of other gradient index
lens materials. Currently, processes to produce gradient index materials include
ion-exchange, chemical vapor deposition and Sol-Gel, all of which produce small
radial gradient index rods with limited applications. Manufacturers using these
processes include Nippon Sheet Glass, Olympus Optical Company, and Gradient Lens
Corporation. We believe that these processes are limited by the small refractive
index change achievable (typically, < 0.05), the small skin depth of the
gradient region (typically < 3 mm), the lack of control of the shape of the
resultant gradient profile, limited glass compositions, and high per unit
manufacturing costs.
14
LightPath Technologies, Inc. - Form 10K, June 30, 2002
MANUFACTURING
COLLIMATORS AND GRADIUM
LightPath has full scale commercial manufacturing operations in its
Albuquerque, New Mexico facilities, totaling 30,300 square feet including a
5,000 square foot clean room that houses our manufacturing stations. Each
station includes laser fusion and housing equipment and an automated testing
process. We currently have two laser polishing stations in operation. With this
equipment, we believe our facilities can meet the capacity requirements of our
planned telecom products for several years. Due to manufacturing techniques we
have developed, we believe our costs to produce the standard collimator will be
less than the traditional industry manufacturing costs.
In April 1996, we built out our lens manufacturing plant for traditional
optics. We believe that the present manufacturing facility can produce in excess
of 2 million lens blanks per year depending on product size and mix. However, in
the fourth quarter of fiscal 2002 we sold our larger, more sophisticated
furnaces, milling machines and metrology equipment to Hikari Glass Co., Ltd. of
Japan (a 40% owned subsidiary of Nikon) ("Hikari") as part of a licensing
agreement whereby they will manufacture GRADIUM glass for LightPath and
distribute to their own customers.
Much of our product qualification is performed in-house. Our test and
evaluation capabilities include Damp Heat, High/Low Temp Storage, and a Thermal
Shock Oven, which are representative of the equipment required to meet BellCore
Testing requirements. Our engineering departments have full design and CAD/CAM
technical support. The implementation of Statistical Process Controls has
allowed us to eliminate costly manual testing operations. We believe the ability
to maintain consistently high quality at the manufacturing stage represents a
significant and distinctive characteristic of our production capabilities.
Quality control will be critical to our ability to bring telecommunication
products to market as the customers demand rigorous testing prior to purchasing
a product.
During the fourth quarter of fiscal 2002, the Company announced plans to
relocate the collimator and GRADIUM glass manufacturing operations from
Albuquerque to Orlando by September 30, 2002. We intend to move a portion of our
manufacturing and product qualification equipment to this facility. We wrote
down underutilized assets at June 30, 2002 and these assets will be disposed of
during fiscal 2003. We will attempt to sublet any leases which do not expire in
fiscal 2003.
SUBCONTRACTORS; STRATEGIC ALLIANCES
We believe that low cost manufacturing will be crucial to our long-term
success. We presently use subcontractors for finishing lenses, including the
collimator lens, and intend to continue to do so. We have the internal
capability to finish prototype lenses and small volume orders. We have qualified
and licensed numerous finishers to fabricate lenses, several of which are
located in Asia. Qualification of additional offshore finishers to augment our
strategy of maximizing cost efficiencies will continue to be a top manufacturing
priority while the assembly and alignment of collimators will be done with
automation at our manufacturing facilities.
We entered into a 1997 strategic alliance with Hikari as a possible second
source for GRADIUM glass production, as a possible source for high-volume blank
production, to increase the presence of GRADIUM glass in Hikari's established
Asian markets and to develop a continuous flow manufacturing process, currently
used by Hikari for high-end optical lenses. In February 2000, Hikari announced
that they intended to spend $5 million to purchase equipment necessary to build
out a second facility for GRADIUM glass materials and other products. During the
fourth quarter of fiscal 2002 these old agreements were cancelled and a new
licensing arrangement was executed, whereby Hikari will manufacture GRADIUM
glass for LightPath as well as Hikari customers throughout Asia.
We have taken steps to protect our proprietary methods of repeatable high
quality manufacturing by patent disclosures and internal trade secret controls.
15
LightPath Technologies, Inc. - Form 10K, June 30, 2002
SUPPLIERS
Base optical materials, used in both optoelectronic and traditional optic
products, are manufactured and supplied by a number of major manufacturers, such
as Hikari, Schott Glaswerke and Hoya Corporation. Optical fiber and collimator
housings are manufactured and supplied by a number of major manufacturers, such
as Corning. We believe that a satisfactory supply of production materials will
continue to be available at reasonable prices, although there can be no
assurance in this regard.
ISOLATORS
Our isolator manufacturing lines are housed in approximately 5,000
square-feet of clean room space (certified Class 10,000) within the Walnut,
California facility. The manufacturing lab contains dual beam laser welding
stations, sub-micron alignment engines, robotic assembly stations, automated
dispensing systems and precision dicing equipment. A tool and die operation,
including EDM capability, is located in a separate shop and assembly area. The
shop supports product design and automation efforts including metrology and
inspection, part prototype fabrication for proof of concept, and machine
building from prototype to production line. The primary benefits of our approach
to manufacturing are (i) reduced costs as a result of higher yields and
throughput, and (ii) product consistency as a result of eliminating manual
labor. We believe we are the only manufacturer of free-space isolators currently
using automated manufacturing. The Walnut facility has similar product
qualification processes and equipment as the Albuquerque facility.
SUPPLIERS
We currently purchase a few key materials from single or limited sources.
The polarizing glass used in our isolator products is supplied primarily by
Corning and is marketed as Polarcor(TM). To date, we have been able to acquire
an ample supply of polarizing glass. Garnet and other crystals used in our
isolator products are provided by a number of vendors, including Casix, Sumitomo
and TDK. Available quantities and adequate pricing of garnet has not proven
problematic. We believe that a satisfactory supply of production materials will
continue to be available at competitive prices, although there can be no
assurance in this regard.
We rely on local and regional vendors for component materials such as
housings, fixtures and magnets. In addition, certain products require external
processing such as brazing and metalization. To date, we have found a suitable
number of qualified vendors in the Southern California market.
MOLDED ASPHERES
Our manufacturing lines for molded aspheres are housed in a new 41,000
square feet, production facility in Orlando, Florida which we moved into in the
second quarter of fiscal 2002. This space was designed to accommodate current
and future growth needs in Orlando. The new facility features extensive clean
room operations, expanded tooling and coating work areas, and expanded areas for
the production of micro-lens arrays and passive integrated assemblies. The new
production facility will also emphasize automation in all phases of
manufacturing. The new facility is expected to provide Geltech with the platform
to significantly reduce costs through process improvements and automation, and
provide the capacity needed for the fulfillment of high volume opportunities.
The facility includes extensive research and development labs featuring
state-of-the-art equipment and metrology. The manufacturing plants include lens
pressing equipment, high precision mold production equipment, advanced metrology
and inspection equipment and coating facilities. The Orlando plant features an
extensive tooling and machine shop, developed for the fabrication of proprietary
press workstations, and advanced mold development.
During the fourth quarter of fiscal 2002, the Company announced plans to
relocate the collimator and GRADIUM glass manufacturing operations from
Albuquerque to Orlando by September 30, 2002.
16
LightPath Technologies, Inc. - Form 10K, June 30, 2002
SUPPLIERS
We utilize a number of glass compositions for the manufacture of our molded
glass aspheres and lens array products. One such glass is a proprietary glass
composition licensed from and manufactured by Corning Inc. Corning Inc. is
currently the sole source for this glass composition. We believe that a
satisfactory supply of production materials will continue to be available at
competitive prices, although there can be no assurance in this regard. Suppliers
and second sources of other glass compositions are readily available.
We also rely on local and regional vendors for component materials and
services such as chemicals and inert gases, specialty ceramics, UV coatings and
other specialty coatings. To date, we have found a suitable number of qualified
vendors for these materials and services.
PATENTS AND OTHER PROPRIETARY INTELLECTUAL PROPERTY
Our policy is to protect our technology by, among other things, patents,
trade secret protection, trademarks and copyrights. As of June 2002, LightPath
and its subsidiaries have fifty-six issued U.S. patents, thirty-three foreign
patents and have filed numerous applications for additional U.S. and foreign
patents. Patents have been issued, and/or patent applications have been filed,
in the areas of glass composition, glass molding, gradient geometries,
production processes, sol-gel processing, product design, fiber attachment,
robotic assembly and micro-fabrication. The first of our issued patents expires
in 2006; the remainder expire at various times through 2019. Patent applications
corresponding to our U.S. applications have been filed in the patent offices in
Europe and Japan pursuant to the Patent Cooperation Treaty. Under the Patent
Cooperation Treaty, a patent applicant may file one patent application and have
it acknowledged as an accepted filing in as many member nations to the Patent
Cooperation Treaty as the applicant elects.
In addition to patent protection, certain process inventions, lens designs
and innovations are retained as trade secrets. A key feature of GRADIUM glass is
that, once fabricated, it does not reveal our formula upon inspection and, to
our knowledge, cannot be reverse-engineered.
LightPath(R) is now registered as a service mark in the United States and
GRADIUM (R) is a registered trademark. Geltech's StableSil (R) is a registered
trademark.
There can be no assurance that any issued patents owned by us will afford
adequate protection to us or not be challenged, invalidated, infringed or
circumvented, or that patent applications relating to our products will result
in patents being issued. There can be no assurance that any rights granted to us
for technologies that we may license in the future will provide competitive
advantages to us. There can be no assurance that patents owned or licensed by us
that are issued in one jurisdiction will also be issued in any other
jurisdiction. Furthermore, there can be no assurance that the validity of any of
the patents would be upheld if challenged by others in litigation or that our
activities would not infringe upon patents owned by others.
Further, there can be no assurance that others have not independently
developed or will not independently develop and patent similar or superior
products and technologies, duplicate any of our products or technologies or
design around our patents. There can be no assurance that patents issued to
others will not adversely affect the development or commercialization of our
products or technologies. We do not have an insurance policy for patent
infringement liability coverage for costs or damages relating to claims of
infringement. We could incur substantial costs in defending suits brought
against us, or any of our licensees, or in suits in which we may assert that our
patent or patents provide us with rights against others or in suits contesting
the validity of a patent. Any such proceedings could be protracted. In addition,
there can be no assurance that we would be successful in defending our patent
rights in any future infringement action. If the outcome of any such litigation
is adverse to our interests, our business may be materially adversely affected.
17
LightPath Technologies, Inc. - Form 10K, June 30, 2002
We do not believe that any of our products or processes infringe any U.S.
or foreign patent rights of any other party. There can be no assurance, however,
that our products or processes do not infringe on a United States or foreign
patent, or patent application. Patent applications in the United States are
maintained in secrecy until the patent is issued. We could incur substantial
costs in defending ourself in infringement litigation brought by others, or in
prosecuting infringement claims against third parties. An adverse party claiming
patent or copyright infringement might assert claims for substantial damages or
seek to obtain an injunction or other equitable relief, which could effectively
block the ability for us to make, use, distribute and sell products.
We also rely on trade secrets and proprietary know-how. We seek to protect
our trade secrets and proprietary know-how, in part, by confidentiality
agreements with our employees, consultants and customers. However, there can be
no assurance that our confidentiality agreements will not be breached or that we
would have adequate remedies for any breach. Some of the confidentiality
agreements that we rely upon will expire in the next few years. There can be no
assurance that others will not independently develop technology or processes
substantially equivalent to or better than our technology or processes, or that
our trade secrets will not otherwise become disclosed to or independently
discovered by our competitors.
ENVIRONMENTAL AND GOVERNMENT REGULATION
Currently, emissions and waste from our present manufacturing processes are
at such low levels that no special environmental permits or licenses are
required. In the future, we may need to obtain special permits for disposal of
increased waste by-products. The glass materials we utilize contain lead and
other toxic elements in a stabilized molecular form. However, the high
temperature diffusion process results in low-level emissions of such elements in
gaseous form. If production reaches a certain level, we believe that we will be
able to efficiently recycle certain of our raw material waste, thereby reducing
disposal levels. We believe that we are presently in compliance with all
material federal, state and local laws and regulations governing our operations
and have obtained all material licenses and permits necessary for the operation
of our business.
Horizon uses a low-emission spray booth for the application of certain
solvents and adhesives in its manufacturing process. Horizon maintains a permit
for its spray booth through its local air quality management district and
believes it is in full compliance with all applicable regulations. Geltech
utilizes certain chemicals and solvents in its manufacturing process. Geltech
maintains all necessary permits and believes it is in full compliance with all
applicable regulations
There are currently no federal, state or local regulations that restrict
the manufacturing and distribution of our telecom products or other products.
Certain end-user applications will require that the complete optical systems
receive government approval, such as U.S. Trade and Drug Administration approval
for use in endoscopy. In these cases, we will generally be involved on a
secondary level and the OEM customer will be responsible for the license and
approval process.
RESEARCH AND DEVELOPMENT
From August 1985 through June 1996, we were engaged in basic research and
development that resulted in the discovery of GRADIUM glass and the proprietary
processes for fabricating GRADIUM glass lenses. This research included
theoretical development of the mathematical formulas for accurately defining
GRADIUM glass, development and refinement of the prescribable, repeatable
fabrication process, and development of the software modeling tools and
metrology. We shipped our first GRADIUM glass products in May 1994. Our initial
flint product line is lead-based. The flint GRADIUM glass family has been
expanded over the years, to include crown glasses, titania silicate glasses and
polymer materials. We intend to continue fundamental materials research, process
and production optimization and the development of new glass compositions to
create different "families" and geometries of GRADIUM glass materials to be
offered to customers. "Families" of glass are various base glass compounds
comprised of different elements. Variation of refractive index can be
accomplished by using different elements in glass.
18
LightPath Technologies, Inc. - Form 10K, June 30, 2002
Further development is necessary to produce GRADIUM glass materials for
high performance, white light applications (such as high performance microscopes
and other products where sensitive color discrimination is critical). We will
continue to upgrade the material design modeling software and optical design
tools to facilitate product design. Working with DR Technologies, we
successfully completed the development of GRADIUM polymer and acrylic materials
in fiscal 1998. These materials may be used for solar concentrators used in
space applications and for conformal optics (optics that conform to design
specifications of aircraft and missiles) where more aerodynamic shapes are
required.
The majority of present development efforts are focused on the standard
collimator assembly and integrated modules. Our acquired businesses continue
their efforts in the area of isolators and next generation optical
subassemblies, waveguides, lens arrays and sub-assembly technologies. We
incurred expenditures for research and development during the years ended June
30, 2002, 2001 and 2000 of $7,095,649, $7,089,931 and $1,449,347, respectively.
In addition, during fiscal 2001and fiscal 2000, $9.1 million and $4.2 million of
in-process research and developments costs were expensed related to the
acquisitions of Geltech and Horizon, respectively. We currently plan to expend
approximately $3.6 million for research and development during fiscal 2003,
which could vary depending upon the progress of projects currently in the proof
of concept stage.
EMPLOYEES
We currently have 167 full-time employees in California, New Mexico, Texas,
Florida and New Jersey. We expect to terminate approximately 67 employees in the
first quarter of fiscal 2003 as part of the consolidation we announced in June
2002. Any employee additions or terminations over the next twelve months,
primarily consisting of manufacturing personnel, will be dependent upon the
actual sales levels realized during fiscal 2003. Twenty-two of our present
employees are engaged in management, administrative and clerical functions,
twenty-one in research and product development, nineteen in equipment
automation, eleven in sales and marketing and ninety-four are in production and
metrology. We intend to continue our current practice of utilizing outside
consultants, where appropriate, in addition to hiring full-time personnel. None
of our employees are represented by labor unions.
19
LightPath Technologies, Inc. - Form 10K, June 30, 2002
RISK FACTORS
THE FOLLOWING RISK FACTORS SHOULD BE READ BY YOU TOGETHER WITH THE MORE DETAILED
INFORMATION INCLUDED AT OTHER SECTIONS OF THE FORM 10-K. OUR FISCAL YEAR ENDS ON
JUNE 30 AND REFERENCES TO YEARS IN THE FORM 10K REFER TO OUR FISCAL YEAR ENDED
AS OF JUNE 30 OF THE REFERENCED CALENDAR YEAR.
RISKS RELATED TO OUR FINANCIAL RESULTS
WE HAVE A HISTORY OF LOSSES AND MAY CONTINUE TO INCUR LOSSES.
We have incurred net losses of $50.7 million and $60.8 million for the fiscal
years ended June 30, 2002 and 2001, respectively and we had an accumulated
deficit of $156 million as of June 30, 2002 . During our fiscal year ending June
30, 2002 we experienced reduced revenues due to the unanticipated widespread
softening of the U.S. economy and the telecommunications industry in particular.
We experienced order cancellations and extensions of product shipment dates by
our customers who adjusted their inventory levels in response to slower industry
growth. These cancellations and extensions adversely impacted our revenues and
could result in higher inventory levels than required to support our sales
levels. These conditions may significantly delay, and could prevent, our ability
to achieve profitability. We expect to continue to incur significant product
development, sales and marketing and administrative expenses, and, as a result,
we will need to generate increased revenues to achieve profitability. Even if we
achieve profitability, given the competition in, and the evolving nature of, the
optical networking market, we may not be able to sustain or increase
profitability on a quarterly or annual basis. As a result, we will need to
generate significantly higher revenues while containing costs and operating
expenses if we are to achieve profitability.
WE FACE ORDER CANCELLATIONS AND EXTENSIONS OF PRODUCT SHIPMENT DATES BY SOME OF
OUR CUSTOMERS.
Our sales are generally made pursuant to purchase orders that are subject to
cancellation, modification or rescheduling without significant penalties to our
customers. We have recently experienced order cancellations and extensions of
product shipment dates by some of our customers. If these or other current
customers stop placing orders, or further reduce orders, we may not be able to
replace these orders with orders from new customers. The majority of our current
customers do not have any minimum purchase obligations, and they may stop
placing orders with us at any time, regardless of any forecast they may have
previously provided. The loss of any of our key customers or further reductions
in sales to these customers would reduce our net revenues from the levels
currently expected.
WE HAVE ANNOUNCED PLANS TO CONSOLIDATE FACILITIES
In June 2002 we announced plans to consolidate our collimator and other lens
production at our Orlando facility and close our Albuquerque facilities. The
widespread softening of the U.S. economy and the telecommunications industry in
particular has required us to lower our manufacturing and administrative costs
and eliminate underutilized capacity. There can be no assurances that we will be
able to retain the key employees due to relocation. We have limited experience
with consolidating businesses within our organization. Our efforts may not be
successful and may result in unanticipated operational problems, expenses and
liabilities, and our business may suffer as a result of diversion of management
attention due to the consolidation. If we are unable to consolidate these
product lines within our organization in a timely and effective manner, our
business and our operating results will be adversely affected.
WE HAVE ONLY RECENTLY BEGUN SELLING PRODUCTS TO THE TELECOMMUNICATIONS INDUSTRY.
We have only generated revenues from the sale of products to the
telecommunications industry since fiscal 1999. Through June 1996, our primary
activities were basic research and development of glass material properties.
Moreover, our ability to accurately forecast revenues is impacted by weaknesses
and uncertainties regarding overall demand within the telecommunications
industry, inventory levels within the industry, sudden order reductions and
cancellations by customers, lower backlog of customer orders, and potential
pricing pressures that may arise from supply/demand conditions within the
industry. Because we have only recently begun to sell these products, we have in
20
LightPath Technologies, Inc. - Form 10K, June 30, 2002
the past and may in the future be unable to accurately forecast our revenues
from sales of these products, and we have limited meaningful historical
financial data upon which to plan future operating expenses. Many of our
expenses are fixed in the short term, and we may not be able to quickly reduce
spending if our revenue is lower than we project. Major new product
introductions will also result in increased operating expenses in advance of
generating revenues, if any. Therefore, net losses in a given quarter could be
greater than expected. We may not be able to address the risks associated with
our limited operating history in an emerging market and our business strategy
may not be sustainable. Failure to accurately forecast our revenues and future
operating expenses could cause quarterly fluctuations in our net revenues and
may result in volatility or a decline in our stock price.
OUR PRODUCTS ARE AT AN EARLY STAGE OF DEVELOPMENT AND MAY NOT ACHIEVE MARKET
ACCEPTANCE.
Many of our telecommunications products are still in the introductory phase, and
our current line of GRADIUM products, and other traditional optics, have not
generated sufficient revenues to sustain operations. While we believe our
existing products are commercially viable, we anticipate the need to educate the
optical components market in order to generate market demand and market feedback
may require us to further refine these products. Development of additional
product lines will require significant further research, development, testing
and marketing prior to commercialization. There can be no assurance that any
proposed products will be successfully developed, demonstrate desirable optical
performance, be capable of being produced in commercial quantities at reasonable
costs or be successfully marketed.
OUR PRODUCTS HAVE NOT BEEN DEMONSTRATED TO BE COMMERCIALLY SUCCESSFUL.
Our collimator products have not yet achieved broad commercial acceptance, our
isolator sales first entered the commercial production phase in April 2000 with
one significant customer and our molded aspheres telecom applications are new.
Although we are engaged in negotiations and discussions with potential
customers, there can be no assurance that any such discussions will lead to
development of commercially viable products or significant revenues, if any, or
that any products currently existing or to be developed in the future will
attain sufficient market acceptance to generate significant revenues. We must
also satisfy industry-standard Telcordia testing on telecommunication products
to meet customer requirements, as well as satisfy prospective customers that we
will be able to meet their demand for quantities of products, since we may be
the sole supplier and licensor. We do not have experience as a manufacturer for
all our product lines and have limited financial resources. We may be unable to
accomplish any one or more of the foregoing to the extent necessary to develop
market acceptance of our products.
Although our traditional optics products have been accepted commercially, the
benefits of the GRADIUM glass line are not widely known. In order to persuade
potential customers to purchase GRADIUM products, we will need to overcome
industry resistance to, and suspicion of, gradient lens technology that has
resulted from previous failed attempts by various researchers and manufacturers
unrelated to us to develop a repeatable, consistent process for producing lenses
with variable refractive indices. Prospective customers will need to make
substantial expenditures in order to redesign products to incorporate GRADIUM
lenses. There can be no assurances that potential customers will view the
benefits of our products as sufficient to warrant such design expenditures.
WE DEPEND ON A FEW KEY CUSTOMERS.
In the fiscal year ended June 30, 2002, Finisar Corp. accounted for 24% of our
net revenue. In the fiscal year ended June 30, 2001 Agere Systems, Inc., Corning
Inc. and JDS Uniphase accounted for 44%, 7.4%, and 5.2% of our net revenues,
respectively. We anticipate that our operating results will continue to depend
on sales to a relatively small number of significant customers. The loss of any
of these customers, or a significant reduction in sales to any such customers,
could adversely affect our revenues.
21
LightPath Technologies, Inc. - Form 10K, June 30, 2002
RISKS RELATED TO THE OPTICAL NETWORKING INDUSTRY
SALES OF OUR PRODUCTS DEPENDS UPON DEPLOYMENT OF OPTICAL NETWORKS TO SATISFY
INCREASED BANDWIDTH REQUIREMENTS.
Our future success depends on the continuing increase in the amount of data
transmitted over communications networks, or bandwidth, and the growth of
optical networks to meet the increased demand for bandwidth. If the Internet
does not continue to expand as a widespread communications medium and commercial
marketplace, the need for significantly increased bandwidth across networks and
the market for optical networking products may not continue to develop. Future
demand for our products is uncertain and will depend to a great degree on the
continued growth and upgrading of optical networks. If the growth and upgrading
of optical networks does not continue, sales of our products may decline, which
would adversely affect our revenues.
THE OPTICAL NETWORKING MARKET IS NEW AND UNPREDICTABLE AND CHARACTERIZED BY
RAPID TECHNOLOGICAL CHANGES AND EVOLVING STANDARDS.
The optical networking market is relatively new and is characterized by rapid
technological change, frequent new product introductions, changes in customer
requirements and evolving industry standards. Because this market is relatively
new, it is difficult to predict its potential size or future growth rate.
Widespread adoption of optical networks is critical to our future success.
Potential end-user customers who have invested substantial resources in their
existing copper lines or other systems may be reluctant or slow to adopt a new
approach, like optical networks. Our success in generating revenues in this
emerging market will depend on, among other things:
- maintaining and enhancing our relationships with our customers;
- the education of potential end-user customers and network service
providers about the benefits of optical networks; and
- our ability to accurately predict and develop our products to meet
industry standards.
If we fail to address changing market conditions, the sales of our products may
decline, which would adversely impact our revenues.
WE MUST INCREASE OUR SALES VOLUMES, REDUCE OUR COSTS OR INTRODUCE HIGHER MARGIN
PRODUCTS TO OFFSET ANTICIPATED REDUCTIONS IN THE AVERAGE SELLING PRICES OF OUR
PRODUCTS.
We have experienced decreases in the average selling prices of some of our
products, including most of our passive component products. We anticipate that
as products in the optical component and module market become more commoditized,
the average selling prices of our products may decrease in response to
competitive pricing pressures, new product introductions by us, our competitors
or other factors. The optical component and module market is experiencing
extreme volatility as a result of lower product demand, which will make it
difficult for us to increase our sales volume. If we are unable to offset the
anticipated decrease in our average selling prices by increasing our sales
volumes or product mix, our net revenues and gross margins will decline. In
addition, to maintain or improve our gross margins, we must continue to reduce
the manufacturing cost of our products, and we must develop and introduce new
products and product enhancements with higher margins. If we cannot maintain or
improve our gross margins, our financial position may be harmed and our stock
price may decline.
RISKS RELATED TO OUR BUSINESS
OUR FUTURE SUCCESS DEPENDS ON OUR ABILITY TO DEVELOP AND SUCCESSFULLY INTRODUCE
NEW AND ENHANCED PRODUCTS THAT MEET THE NEEDS OF OUR CUSTOMERS.
Our future success depends on our ability to anticipate our customers' needs and
develop products that address those needs. Introduction of new products and
product enhancements will require that we effectively transfer production
processes from research and development to manufacturing and coordinate our
efforts with the efforts of our suppliers to rapidly achieve efficient volume
production. If we fail to effectively transfer production processes, develop
product enhancements or introduce new products that meet the needs of our
customers as scheduled, our net revenues may decline.
22
LightPath Technologies, Inc. - Form 10K, June 30, 2002
IF WE ARE UNABLE TO SUCCESSFULLY INTEGRATE ACQUIRED COMPANIES, OUR BUSINESS MAY
BE ADVERSELY AFFECTED.
During the calendar year ended December 31, 2000, we acquired both Horizon and
Geltech in separate transactions. The efficient integration of these businesses
into our organization will be important to our success. If our integration
efforts prove to be unsuccessful, our business will suffer. We have spent, and
expect to continue to spend, significant financial, management and other
resources to integrate these businesses into our organization. Our headcount
increased substantially as a result of the acquisitions, and these new employees
must be integrated with our existing employees. Both Horizon and Geltech were
privately held and may require substantial investments in operational and
financial infrastructure to ensure that their systems and processes adequately
support operating as a publicly held organization. Each of these organizations
will also need additional investments in manufacturing infrastructure in order
to develop new products and ramp up production volumes. There can be no
assurances that we will be able to retain the key employees of Horizon and
Geltech. We have limited experience with integrating acquired businesses into
our organization. Our integration efforts may not be successful and may result
in unanticipated operations problems, expenses and liabilities and the diversion
of management attention. If we are unable to integrate these companies into our
organization in a timely and effective manner, our business and our operating
results will be adversely affected.
We anticipate that in the future, as part of our business strategy, we may
continue to make strategic acquisitions of complementary companies, products or
technologies. In the event of any further future acquisitions, we could:
- issue stock that would dilute our current stockholders' percentage
ownership;
- incur debt;
- assume liabilities; or
- incur expenses related to in-process research and development, and
amortization of intangible assets.
Any future acquisitions also could involve numerous risks, including:
- problems associated with combining the acquired operations,
technologies or products;
- unanticipated costs or liabilities;
- diversion of management's attention from our core business;
- adverse effects on existing business relationships with suppliers and
customers;
- risks associated with entering markets in which we have no or limited
prior experience; and
- potential loss of key employees, particularly those of the acquired
businesses.
We cannot assure that we will be able to successfully integrate any businesses,
products, technologies or personnel that we might acquire in the future, which
may harm our business.
COMPETITION MAY INCREASE, WHICH COULD REDUCE OUR SALES AND GROSS MARGINS, OR
CAUSE US TO LOSE MARKET SHARE.
Competition in the optical component and module market in which we compete is
intense. Many of our competitors are large public companies that have longer
operating histories and significantly greater financial, technical, marketing
and other resources than we have. As a result, these competitors are able to
devote greater resources than we can to the development, promotion, sale and
support of their products. In addition, the market capitalization and cash
reserves of several of our competitors are much larger than ours, and, as a
result, these competitors are much better positioned than we are to acquire
other companies in order to gain new technologies or products that may displace
our product lines. Such acquisitions could give our competitors a strategic
advantage. For example, if our competitors acquire any of our significant
customers, these customers may reduce the amount of products they purchase from
us. Alternatively, some of our competitors may spin-out new companies in the
optical component and module market. These companies may compete more
aggressively than their former parent companies due to their greater dependence
on our markets. In addition, many of our potential competitors have
significantly more established sales and customer support organizations, much
greater name recognition, more extensive customer bases, more developed
23
LightPath Technologies, Inc. - Form 10K, June 30, 2002
distribution channels and broader product offerings than we have. These
companies can leverage their customer bases and broader product offerings and
adopt aggressive pricing policies to gain market share. Additional competitors
may enter the market, and we are likely to compete with new companies in the
future. We expect to encounter potential customers that, due to existing
relationships with our competitors, are committed to the products offered by
these competitors. As a result of the foregoing factors, we expect that
competitive pressures may result in price reductions, reduced margins and loss
of market share.
We compete with manufacturers of conventional spherical lens products and
aspherical lens products, producers of optical quality glass and other
developers of gradient lens technology as well as telecom product manufacturers.
In both the optical lens and telecommunications components markets, we are
competing against, among others, established international industry giants. Many
of these companies also are primary customers for optical and telecommunication
components, and therefore have significant control over certain markets for our
products. We are also aware of other companies that are attempting to develop
radial gradient lens technology. There may also be others of which we are not
aware that are attempting to develop axial gradient lens technology similar to
our technology. There can be no assurance that existing or new competitors will
not develop technologies that are superior to or more commercially acceptable
than our existing and planned technologies and products.
OUR PRODUCTS MAY CONTAIN UNKNOWN DEFECTS.
Some of our products are designed to be deployed in large and complex optical
networks. Because of the nature of these products, they can only be fully tested
for reliability when deployed in networks for long periods of time. Our fiber
optic products may contain undetected defects when first introduced or as new
versions are released, and our customers may discover defects in our products
only after they have been fully deployed and operated under peak stress
conditions. In addition, our products often are combined with products from
other vendors. As a result, should problems occur, it may be difficult to
identify the source of the problem. If we are unable to fix defects or other
problems, we could experience, among other things:
- loss of customers;
- damage to our brand reputation;
- failure to attract new customers or achieve market acceptance;
- diversion of development and engineering resources; and
- legal actions by our customers or third parties.
The occurrence of any one or more of the foregoing factors could cause our net
revenues to decline or otherwise have an adverse effect on our business.
WE FACE PRODUCT LIABILITY RISKS.
The sale of our optical products will involve the inherent risk of product
liability claims by others. We do not currently maintain product liability
insurance coverage. Product liability insurance is expensive, subject to various
coverage exclusions and may not be obtainable on terms acceptable to us if we
decide to procure such insurance in the future. Moreover, the amount and scope
of any coverage may be inadequate to protect us in the event that a product
liability claim is successfully asserted.
OUR PRODUCTS HAVE LONG AND VARIABLE SALES CYCLES.
The timing of our revenue is difficult to predict because of the length and
variability of the sales and implementation cycles for our products. We do not
recognize revenue until a product has been shipped to a customer, all
significant vendor obligations have been performed and collection is considered
probable. Customers often view the purchase of our products as a significant and
strategic decision. As a result, customers typically expend significant effort
in evaluating, testing and qualifying our products and our manufacturing
process. This customer evaluation and qualification process frequently results
in a lengthy initial sales cycle (often one year or longer). While our customers
are evaluating our products and before they place an order with us, we may incur
substantial sales and marketing and research and development expenses to
customize our products to the customer's needs. We may also expend significant
management efforts, increase manufacturing capacity and order long lead-time
components or materials prior to receiving an order. Even after this evaluation
24
LightPath Technologies, Inc. - Form 10K, June 30, 2002
process, a potential customer may not purchase our products. Because of the
evolving nature of the optical component and module market, we cannot predict
the length of these sales and development cycles. The recent slowdown in the
U.S. economy has resulted in order cancellations and extensions of product
shipment dates by our customers. These long sales cycles, coupled with the
uncertain affects of the slowdown in the U.S. economy, may cause our revenues
and operating results to vary significantly and unexpectedly from quarter to
quarter, which could continue to cause volatility in our stock price.
WE DEPEND ON KEY PERSONNEL TO MANAGE OUR BUSINESS EFFECTIVELY.
Our future success depends upon the continued services of our executive officers
and other key engineering, sales, marketing, manufacturing and support
personnel. Our inability to retain or attract key employees could have a
material adverse effect on our business and results of operations. Our
operations depend, to a great extent, upon the efforts of our senior officers.
We also depend upon our ability to attract additional members to our management
and operations teams to support our expansion strategy. The loss of any of these
key employees would adversely affect our business. We had approximately 167
full-time employees on June 30, 2002. Although we have reduced our workforce by
approximately 133 people during the last fiscal year, we expect to continue to
hire selectively in the manufacturing, engineering, sales and marketing and
administrative functions to the extent consistent with our business levels. Our
ability to continue to attract and retain highly skilled personnel will be a
critical factor in determining whether we will be successful. Competition for
highly skilled personnel is intense. We may not be successful in attracting,
assimilating or retaining qualified personnel to fulfill our current or future
needs, which could adversely impact our ability to develop and sell our
products.
WE HAVE LIMITED PRODUCT OFFERINGS, SOME OF WHICH ARE CURRENTLY EXPERIENCING A
DECLINE IN DEMAND.
We derive a substantial portion of our net revenues from a limited number of
products. Specifically, in the fiscal year ended June 30, 2002, we derived
approximately 35%, 14.5%, 17.2% and 33.3% of our net revenues from our
isolators, collimators, molded aspheric lenses and traditional optics products,
respectively. We expect that net revenues from a limited number of products will
continue to account for a substantial portion of our total net revenues. Demand
for these and other optical component and module products has declined as a
result of the recent slowdown in the U.S. economy and we continue to experience
order cancellations and delays in product shipment dates by our customers. Aside
from the current slowdown in the telecommunications industry, continued and
widespread market acceptance of our products is critical to our future success.
We cannot assure you that, once the telecommunication industry conditions
improve, our current products will achieve market acceptance at the rate at
which we expect, or at all, which could adversely affect our results of
operations.
WE MUST ACCURATELY TIME OUR MANUFACTURING CAPACITY WITH THE DEMAND FOR OUR
PRODUCTS.
We face a challenge in accurately timing the installation of our manufacturing
capacity with the demand for our products. Throughout fiscal 2001 we expanded
our manufacturing capacity through the expansion of facilities and the hiring of
employees and through the acquisition of Geltech. At June 30, 2002, we had a
total of 167 full-time employees, down from 300 employees at June 30, 2001. As a
result of the recent, and sudden, order cancellations and extensions of product
shipment dates by our customers, we are slowing the rate of production of some
of our products. We have announced that we intend to terminate 67 additional
employees by December 2002 as we consolidate our facilities. We also may curtail
efforts to install new equipment in our facilities until market conditions
improve. We believe this approach will allow us to quickly ramp up production if
unit demand for our products merits. However, if demand for our products
continues to decline, we may have more employees and facility space than
necessary to deliver our products, which would adversely impact our ability to
achieve profitability, and could require us to further reduce the size of our
operations.
Despite our recent announcement of plans to consolidate our business, we still
face challenges as a result of our rapid expansion over the past few fiscal
years. The increase in employees as a result of our acquisitions and the growth
in our operations, combined with the challenges of managing
geographically-dispersed operations, have placed, and will continue to place, a
significant strain on our management systems and resources. We expect that we
25
LightPath Technologies, Inc. - Form 10K, June 30, 2002
will need to continue to improve our financial and managerial controls,
reporting systems and procedures and continue to expand, train and manage our
work force. The failure to effectively manage our recent growth and to
accurately time any future growth with market demand for our products could
adversely impact our ability to manufacture and sell our products, which could
reduce our revenues.
WE MUST EXPAND OUR SALES ORGANIZATION.
The sale of our products requires long and involved efforts targeted at several
key departments within our prospective customers' organizations. Sales of our
products require the prolonged efforts of executive personnel and specialized
systems and applications engineers working together with a small number of
dedicated salespersons. Currently, our sales organization is limited. We will
need to grow our sales force in order to increase market awareness and sales of
our products. Competition for these individuals is intense, and we might not be
able to hire the kind and number of sales personnel and applications engineers
we need. If we are unable to expand our sales operations, we may not be able to
increase market awareness or sales of our products, which would prevent us from
increasing our revenues.
WE MUST MAKE SALES IN A FRAGMENTED MARKET.
The markets for optical lenses and telecommunication components are highly
fragmented. Consequently, we will need to identify and successfully target
particular market segments in which we believe we will have the most success.
These efforts will require a substantial, but unknown, amount of effort and
resources. The fragmented nature of the optical products market may impede our
ability to achieve commercial acceptance for our products. In addition, our
success will depend in great part on our ability to develop and implement a
successful marketing and sales program. There can be no assurance that any
marketing and sales efforts undertaken by us will be successful or will result
in any significant product sales.
CURRENT AND PENDING LITIGATION MAY ADVERSELY IMPACT OPERATING RESULTS.
On May 2, 2000, the Company commenced a class action lawsuit in the Chancery
Court of Delaware, New Castle County (the "Court"). In this action, the Company
sought a declaratory judgment with respect to the Company's right to redeem the
Class E Common Stock on March 31, 2001 for $.0001 per share, the right of the
holders of Class E Common Stock to vote at the Annual Meeting to be held on
October 6, 2000, and for certification of the holders of Class E Common Stock as
a class and the named defendants as its representatives. The final Settlement
Agreement of this lawsuit requires the Company to pay $0.40 per Class E share.
The Settlement Agreement permits Class E shareholders to elect not to
participate in the settlement and thus will not be binding on any Class E
shareholders who so elect. Approximately 12% of the former Class E shareholders
elected not to participate in the settlement. Based on the above, the Company
estimates the total cost of the Settlement Agreement at $1.5 million, which will
be distributed during the first quarter of fiscal 2003.
On or about June 9, 2000, a small group of holders of Class E Common Stock
commenced an action in a state court in Texas (the "Texas Action"). Plaintiffs
in the Texas Action have made various allegations regarding the circumstances
surrounding the issuance of the Class E Common Stock and seek damages based upon
those allegations. Management believes the allegations underlying the Texas
litigation are without merit, however, we are unable to predict the outcome of
this litigation at this time.
The Company may from time to time become involved in other lawsuits and legal
proceedings. Litigation is subject to inherent uncertainties, and an adverse
result in any such matters that may arise from time to time may adversely impact
our operating results or financial condition. Additionally, any litigation to
which we are subject could require significant involvement of our senior
management and may divert management's attention from our business and
operations.
WE FACE RISKS ASSOCIATED WITH INTERNATIONAL SALES.
For the fiscal year ended June 30, 2002, approximately 14% of our net revenues
were from sales to international customers. Our international sales will be
limited if we cannot establish and/or maintain relationships with international
distributors, establish foreign operations, expand international sales, and
26
LightPath Technologies, Inc. - Form 10K, June 30, 2002
develop relationships with international service providers. Additionally, our
international sales may be adversely affected if international economies weaken.
We are subject to risks including the following:
- greater difficulty in accounts receivable collection and longer
collection periods;
- the impact of recessions in economies outside the United States;
- unexpected changes in regulatory requirements;
- sudden and unexpected reductions in demand in particular countries in
response to exchange rate fluctuations;
- certification requirements;
- reduced protection for intellectual property rights in some countries;
- potentially adverse tax consequences; and
- political and economic instability.
While we expect our international revenues to be denominated predominantly in
U.S. dollars, in the future a portion of our international revenues and expenses
may be denominated in foreign currencies. Accordingly, we could experience the
risks of fluctuating currencies and the corresponding exchange rates.
OUR STOCK PRICE IS VOLATILE.
Broad market fluctuations or fluctuations in our operations may adversely affect
the market price of our Common Stock. The market for our Common Stock is
volatile. The trading price of our Common Stock has been and will continue to be
subject to:
- volatility in the trading markets generally and in our particular
market segment;
- limited trading of our common stock;
- significant fluctuations in response to quarterly variations in
operating results;
- announcements regarding our business or the business of our customers
or competitors;
- changes in prices of our or our competitors' products and services;
- changes in product mix;
- changes in revenue and revenue growth rates; and
- other events or factors.
Statements or changes in opinions, ratings or earnings estimates made by
brokerage firms or industry analysts relating to the markets in which we operate
or expect to operate could have an adverse effect on the market price of our
Common Stock. In addition, the stock market as a whole, as well as our
particular market segment, have from time to time experienced extreme price and
volume fluctuations which have particularly affected the market price for the
securities of many companies and which often have been unrelated to the
operating performance of these companies.
DECLARATION OF DIVIDENDS TO SHAREHOLDERS IN THE FORESEEABLE FUTURE IS UNLIKELY.
Our Board has never declared a dividend on our Common Stock. We do not
anticipate paying dividends on the Common Stock in the foreseeable future. It is
anticipated that earnings, if any, will be reinvested in the expansion of our
business.
POTENTIAL INFLUENCE OF EXISTING MANAGEMENT AND PRINCIPAL SHAREHOLDERS.
If our management and shareholders act in concert, disposition of matters
submitted to shareholders or the election of the entire Board of Directors may
be hindered. We estimate that management and our principal shareholders
beneficially owned approximately XX% of the aggregate Common Stock outstanding
as of August 1, 2002.
SOME PROVISIONS IN OUR CHARTER DOCUMENTS AND BYLAWS MAY HAVE ANTI-TAKEOVER
EFFECTS.
Our Certificate of Incorporation and Bylaws contain some provisions that could
have the effect of discouraging a prospective acquirer from making a tender
offer for our commons stock, or which may otherwise delay, defer or prevent a
change in control.
27
LightPath Technologies, Inc. - Form 10K, June 30, 2002
OUR WARRANTS AND OPTIONS MAY AFFECT OUR FUTURE FINANCING.
The existence of our outstanding options or warrants may adversely affect the
terms on which we can obtain additional financing. As of June 30, 2002 there
were outstanding:
- warrants issued in private placement and other transactions pursuant
to which 299,300 shares of Common Stock are issuable; and
- outstanding options to purchase an aggregate of 4,518,412 shares of
Common Stock.
In addition, approximately 386,000 shares of Common Stock were reserved as of
June 30, 2002 for issuance pursuant to future grants to be made under the
Omnibus Incentive Plan and Directors Stock Incentive Plan.
For the life of such options and warrants, the holders will have the opportunity
to profit from a rise in the price of the underlying common stock, with a
resulting dilution in the interest of other holders of common stock upon
exercise or conversion. Further, the option and warrant holders can be expected
to exercise their options and warrants at a time when we would, in all
likelihood, be able to obtain additional capital by an offering of our unissued
common stock on terms more favorable to us than those provided by such options
or warrants.
The eligibility of the foregoing shares to be sold to the public, whether
pursuant to an effective registration statement, Rule 144 or an exemption from
the registration requirements may have a material adverse effect on the market
value and trading price of the Common Stock.
WE HAVE AGREED TO CERTAIN LIMITATIONS UPON POTENTIAL LIABILITY OF OUR DIRECTORS.
Our Certificate of Incorporation provides that directors will not be personally
liable for monetary damages to LightPath or its shareholders for a breach of
fiduciary duty as a director, subject to limited exceptions. Although such
limitation of liability does not affect the availability of equitable remedies
such as injunctive relief or rescission, the presence of these provisions in the
Certificate of Incorporation could prevent the recovery of monetary damages by
LightPath or its shareholders.
WE MUST MAINTAIN COMPLIANCE WITH CERTAIN CRITERIA IN ORDER TO MAINTAIN LISTING
OF OUR SHARES ON THE NASDAQ MARKET.
The Company's Common Stock is currently traded on the Nasdaq National Market.
Failure to meet the applicable quantitative and/or qualitative maintenance
requirements of Nasdaq could result in our securities being delisted from the
Nasdaq National Market. Our Common stock has recently traded below the $1.00 per
share minimum price requirement, which would subject our Common Stock to
delisting. If delisted from the Nasdaq National Market, our securities may be
eligible for trading on the Nasdaq SmallCap Market, the OTC Bulletin Board or on
other over-the-counter markets, although there can be no assurance that our
securities will be eligible for trading on any alternative exchanges or markets.
As a consequence of such delisting, an investor could find it more difficult to
dispose of or to obtain accurate quotations as to the market value of our
securities. Among other consequences, delisting from Nasdaq may cause a decline
in the stock price and difficulty in obtaining future financing.
RISK THAT FORWARD-LOOKING STATEMENTS MAY NOT COME TRUE.
This report contains forward-looking statements that involve risks and
uncertainties. We use words such as "believe", "expect," "anticipate," "plan" or
similar words to identify forward-looking statements. Forward-looking statements
are made based upon our belief as of the date that such statements are made.
These forward-looking statements are based largely on our current expectations
and are subject to a number of risks and uncertainties, many of which are beyond
our control. You should not place undue reliance on these forward-looking
statements, which speak as of the date of this report. Our actual results could
differ materially from those anticipated in these forward-looking statements for
many reasons, including the risks faced by us described above and elsewhere in
this report.
BUSINESS INTERRUPTIONS COULD ADVERSELY AFFECT OUR BUSINESS.
Our operations are vulnerable to interruption by fire, earthquake, power loss,
telecommunications failure and other events beyond our control. We do not have a
detailed disaster recovery plan. We carry only a limited amount of business
28
LightPath Technologies, Inc. - Form 10K, June 30, 2002
interruption insurance, which may not sufficiently compensate us for losses that
may occur. Our facilities may be subject to electrical blackouts as a
consequence of a shortage of available electrical power. We currently do not
have backup generators or alternate sources of power in the event of a blackout.
If blackouts interrupt our power supply, we would be temporarily unable to
continue operations at our affected facilities. Any losses or damages incurred
by us as a result of blackouts or other business interruptions could impair our
reputation, harm our ability to retain existing customers and to obtain new
customers, and could result in lost revenue, any of which could substantially
harm our business and results of operations.
WE MAY NEED ADDITIONAL FUTURE FINANCING IN ORDER TO FUND OUR OPERATIONS AND
PLANS FOR GROWTH.
While the Company continues to take actions to reduce cash used from operations,
there can be no assurance that the Company will generate sufficient revenues to
fund its future operations and growth strategies. We may need to obtain
additional financing in the future. We do not have any commitments from others
to provide additional financing in the future and there can be no assurance that
any such additional financing will be available if needed or, if available, will
be on terms favorable to us. In the event such needed financing is not obtained,
our operations will be materially adversely affected and we could be forced to
cease or substantially reduce operations. Any additional equity financing may be
dilutive to shareholders, and debt financings, if available, may involve
restrictive covenants.
OUR BUSINESS DEPENDS UPON THE EFFORTS OF THIRD PARTIES.
Our strategy for the research, development and commercialization of certain
products entails entering into various arrangements with corporate partners,
OEMs, licensees and others in order to generate product sales, license fees,
royalties and other funds adequate for product development. We may also rely on
our collaborative partners to conduct research efforts, product testing and to
manufacture and market certain of our products. Although we believe that parties
to any such arrangements would have an economic motivation to succeed in
performing their contractual responsibilities, the amount and timing of
resources to be devoted to these activities may not be within our control. There
can also be no assurance that we will be successful in establishing any such
collaborative arrangements or that, if established, the parties to such
arrangements will assist us in commercializing products. We have a non-exclusive
agreement with a catalog company to distribute certain of our products. We have
formalized relationships with eight foreign distributors to create markets for
GRADIUM in their respective countries. There can be no assurance that these
parties, or any future partners, will perform their obligations as expected or
that any revenue will be derived from such arrangements.
RISKS RELATED TO MANUFACTURING OUR PRODUCTS
IF WE DO NOT ACCURATELY PROJECT DEMAND FOR OUR PRODUCTS, WE WILL HAVE EXCESS
MANUFACTURING CAPACITY OR INSUFFICIENT MANUFACTURING CAPACITY.
We currently manufacture substantially all of our products in our facilities
located in Albuquerque, New Mexico, Walnut, California and Orlando, Florida.
Based on the sudden change in U.S. economic conditions, we realized lower demand
for our products in fiscal 2002 and we now expect only modest improvement in
fiscal 2003. We intend to operate at lower production output during fiscal 2003
while retaining flexibility to meet demand if it should increase in the near
future. Although we eliminated significant amounts of excess manufacturing
capacity in fiscal 2002, we expect that the production slowdown may continue to
negatively impact our gross margins during fiscal 2003. If we fail to accurately
coordinate our production capacity and output with demand for our products in
the future, we may have excess capacity or insufficient capacity, either of
which may seriously harm our results of operations.
Furthermore, we may experience delays, disruptions or quality control problems
in our manufacturing operations, and, as a result, product shipments to our
customers could be delayed beyond the revised shipment schedules requested by
our customers, which would negatively impact our revenues, competitive position
and reputation. For example, we have, in the past, experienced a disruption in
the manufacture of some of our products due to changes in our manufacturing
processes, which resulted in reduced manufacturing yields and delays in the
shipment of our products. If we experience similar disruptions in the future, it
29
LightPath Technologies, Inc. - Form 10K, June 30, 2002
may result in lower yields or delays of our product shipments, which could
adversely affect our revenues, gross margins and results of operations.
OUR FAILURE TO ACCURATELY FORECAST MATERIAL REQUIREMENTS COULD CAUSE US TO INCUR
ADDITIONAL COSTS, HAVE EXCESS INVENTORIES OR HAVE INSUFFICIENT MATERIALS TO
BUILD OUR PRODUCTS.
We use rolling forecasts based on anticipated product orders to determine our
materials requirements. It is very important that we accurately predict both the
demand for our products and the lead times required to obtain the necessary
materials. Lead times for materials that we order vary significantly and depend
on factors such as specific supplier requirements, the size of the order,
contract terms and current market demand for the materials at a given time. If
we overestimate our material requirements, we may have excess inventory, which
would increase our costs. If we underestimate our material requirements, we may
have inadequate inventory, which could interrupt our manufacturing and delay
delivery of our products to our customers. Any of these occurrences would
negatively impact our results of operations. Recent order cancellations and
extension of product delivery dates by our customers have created a risk of
material obsolescence. Additionally, in order to avoid excess material
inventories we may incur cancellation charges associated with modifying existing
purchase orders with our vendors.
IF WE DO NOT ACHIEVE ACCEPTABLE MANUFACTURING YIELDS OR SUFFICIENT PRODUCT
RELIABILITY, OUR ABILITY TO SHIP PRODUCTS TO OUR CUSTOMERS COULD BE DELAYED.
The manufacture of our products involves complex and precise processes. Our
manufacturing costs for several products are relatively fixed, and, thus,
manufacturing yields are critical to our results of operations. Changes in our
manufacturing processes or those of our suppliers, or the use of defective
materials, could significantly reduce our manufacturing yields and product
reliability. In addition, we may experience manufacturing delays and reduced
manufacturing yields upon introducing new products to our manufacturing lines.
We may experience lower than targeted product yields in the future which could
adversely affect our operating results.
IF OUR CUSTOMERS DO NOT QUALIFY OUR MANUFACTURING LINES FOR VOLUME SHIPMENTS,
OUR OPERATING RESULTS COULD SUFFER.
Generally, customers do not purchase our products, other than limited numbers of
evaluation units, prior to qualification of the manufacturing line for volume
production. Our existing manufacturing lines, as well as each new manufacturing
line, must pass through varying levels of qualification with our customers.
Customers may require that we be registered under international quality
standards, such as ISO 9001. This customer qualification process determines
whether our manufacturing lines meet the customers' quality, performance and
reliability standards. If there are delays in qualification of our products, our
customers may drop the product from a long-term supply program, which would
result in significant lost revenue opportunity over the term of that program.
WE DEPEND ON SINGLE OR LIMITED SOURCE SUPPLIERS FOR SOME OF THE KEY MATERIALS IN
OUR PRODUCTS, WHICH MAKES US SUSCEPTIBLE TO SUPPLY SHORTAGES OR PRICE
FLUCTUATIONS.
We currently purchase several key materials used in the manufacture of our
products from single or limited source suppliers. We may fail to obtain required
materials in a timely manner in the future, or could experience further delays
from evaluating and testing the products of these potential alternative
suppliers. The recent softening of demand in the telecommunications industry
could adversely impact the financial condition of our suppliers, many of whom
have limited financial resources. We have in the past, and may in the future, be
required to provide advance payments in order to secure key materials from
financially limited suppliers. Financial or other difficulties faced by these
suppliers could limit the availability of key components or materials.
Additionally, financial difficulties could impair our ability to recover
advances made to these suppliers. Any interruption or delay in the supply of any
of these materials, or the inability to obtain these materials from alternate
sources at acceptable prices and within a reasonable amount of time, would
impair our ability to meet scheduled product deliveries to our customers and
could cause customers to cancel orders.
30
LightPath Technologies, Inc. - Form 10K, June 30, 2002
RISKS RELATED TO OUR INTELLECTUAL PROPERTY
WE MAY NOT BE ABLE TO PROTECT OUR PROPRIETARY TECHNOLOGY.
We rely on a combination of patent, copyright, trademark and trade secret laws
and restrictions on disclosure to protect our intellectual property rights. We
cannot assure that our patent applications will be approved, that any patents
that we may issue will protect our intellectual property or that third parties
will not challenge any issued patents. Other parties may independently develop
similar or competing technology or design around any patents that may be issued
to us.
WE MAY BECOME INVOLVED IN INTELLECTUAL PROPERTY DISPUTES AND LITIGATION.
We anticipate, based on the size and sophistication of our competitors and the
history of rapid technological advances in our industry, that several
competitors may have patent applications in progress in the United States or in
foreign countries that, if issued, could relate to products similar to ours. If
such patents were to be issued, the patent holders or licensees may assert
infringement claims against us or claim that we have violated other intellectual
property rights. These claims and any resulting lawsuits, if successful, could
subject us to significant liability for damages and invalidate our proprietary
rights. The lawsuits, regardless of their merits, could be time-consuming and
expensive to resolve and would divert management time and attention. Any
potential intellectual property litigation could also force us to do one or more
of the following, any of which could harm our business:
- stop selling, incorporating or using our products that use the
disputed intellectual property;
- obtain from third parties a license to sell or use the disputed
technology, which license may not be available on reasonable terms, or
at all; or
- redesign our products that use the disputed intellectual property.
IF WE ARE UNABLE TO PROTECT AND ENFORCE OUR INTELLECTUAL PROPERTY RIGHTS, WE MAY
BE UNABLE TO COMPETE EFFECTIVELY.
We regard substantial elements of our technology as proprietary and attempt to
protect them by relying on patent, trademark, service mark, copyright and trade
secret laws. We also rely on confidentiality procedures and contractual
provisions with our employees, consultants and corporate partners. The steps we
take to protect our intellectual property may be inadequate, time consuming and
expensive. Furthermore, despite our efforts, we may be unable to prevent third
parties from infringing upon or misappropriating our intellectual property,
which could harm our business.
It may be necessary to litigate to enforce our patents, copyrights, and other
intellectual property rights, to protect our trade secrets, to determine the
validity of and scope of the proprietary rights of others or to defend against
claims of infringement or invalidity. Such litigation can be time consuming,
distracting to management, expensive and difficult to predict. Our failure to
protect or enforce our intellectual property could have an adverse effect on our
business, financial condition, prospects and results of operation.
NECESSARY LICENSES OF THIRD-PARTY TECHNOLOGY MAY NOT BE AVAILABLE TO US OR MAY
BE VERY EXPENSIVE.
From time to time we may be required to license technology from third parties to
develop new products or product enhancements. We can provide no assurance that
third-party licenses will be available to us on commercially reasonable terms,
or at all. The inability to obtain any third-party license required to develop
new products and product enhancements could require us to obtain substitute
technology of lower quality or performance standards or at greater cost, either
of which could seriously harm our ability to manufacture and sell our products.
31
LightPath Technologies, Inc. - Form 10K, June 30, 2002
ITEM 2. DESCRIPTION OF PROPERTY
We lease our headquarters, a manufacturing facility, a development office
and an engineering office, in Albuquerque, New Mexico. The leases are generally
five year leases with renewal options which currently are scheduled to expire
from November 2002 through April 2005. The leased space houses all of our
operations, including research, product design and development, production and
all administrative operations. The 13,300, 17,000, 7,000 and 3,500 square foot
facilities are located in a business and research park. We are obligated to make
monthly rental payments of approximately $25,000. Due to our announced
consolidation of New Mexico facilities to Florida, we will not renew two of the
leases for 16,800 square feet which expire in November 2002 or the 17,000 square
feet lease obligation which expires in March 2003. We will attempt to sublet the
remaining 7,000 square feet which expires in December 2003.
We leased an 11,500 square foot facility for office and research and
development in Warren, New Jersey which we closed in fiscal 2002. We are
obligated to make monthly rental payments of approximately $19,000 until May
2005. As of September 2002, the Company assigned this lease but we remain
currently obligated to make monthly payments of approximately $2,500 until May
2005.
We lease a 10,200 square foot facility in Walnut, California. The leased
space houses all of the isolator operations, including office, manufacturing and
development space. We are obligated to make monthly rental payments of
approximately $7,000 until October 2003.
During fiscal 2002, we expanded our Florida manufacturing site to 41,000
square feet facility which will contains a 9,000 square foot clean room. In
addition, the collimator manufacturing and development group from New Mexico
will be relocating to this facility during the first quarter of fiscal 2003.
Lease terms on the new facility call for monthly rental payments of
approximately $45,000 until October 2008. We will continue to try and sublease
excess space to a third party until needed for expansion.
ITEM 3. LEGAL PROCEEDINGS
On May 2, 2000, the Company commenced a class action lawsuit in the Chancery
Court of Delaware, New Castle County. The action seeks a declaratory judgment
with respect to the Company's right to redeem the Class E Common Stock on March
31, 2001 for $.0001 per share, the right of the holders of Class E Common Stock
to vote at the Annual Meeting to be held on October 6, 2000, and for
certification of the holders of Class E Common Stock as a class and the named
defendants as its representatives. The named defendants are Donald E. Lawson,
former President, Chief Executive Officer and a Director of the Company, who
owns an aggregate of 25,000 shares of Class E Common Stock, Louis G. Leeburg, a
Director of the Company, who owns an aggregate of 7,272 shares of Class E Common
Stock, and William Leeburg, who owns or controls an aggregate of 21,816 shares
of Class E Common Stock. The Company entered into a proposed settlement of this
lawsuit whereby the holders of Class E Common Stock could elect to receive
either $.40 for each share of Class E Common Stock or a two year option to
purchase one Class A Common Stock for each 100 shares of Class E Common Stock
they hold. On January 8, 2001, the Delaware Chancery Court held a hearing on the
proposed settlement and ruled on February 2, 2001, that holders of Class E
Common Stock must be provided an opportunity to request exclusion from the
settlement class. In December 2001, the Company agreed to proceed with the
settlement to include a provision that each former E shareholder has the right
to request exclusion from the settlement class. By June 30, 2002, the final
settlement arrangements had been mailed to former holders of Class E Common
Stock pursuant to which they would receive a settlement payment of $0.40 for
each share. Approximately 3.6 million shares of Class E Common Stock will
participate in the settlement whereas approximately 0.5 million shares opted out
of the settlement. The Company has determined that it is probable that the
settlement offer will occur and an estimated settlement charge of $1.5 million
has been accrued as of June 30, 2002.
On or about June 9, 2000, a small group of holders of Class E Common Stock (the
"Texas Plaintiffs") commenced an action in a state court in Texas (the "Texas
Action"). The Texas Plaintiffs allege that the actions of the Company, and
32
LightPath Technologies, Inc. - Form 10K, June 30, 2002
certain named individuals, leading up to and surrounding the Company's 1995
proxy statement constitute fraud, negligent misrepresentation, fraudulent
inducement, breach of fiduciary duty and civil conspiracy. In general, the Texas
Plaintiffs allege misrepresentations and omissions in connection with a request
from the Company that its shareholders consent to a recapitalization, resulting
in a 5.5 to 1 reverse stock split and the issuance of certain Class E Common
Stock. The Texas Plaintiffs further allege that, as a result of the defendants'
actions, they were induced to consent to the Company's recapitalization. The
Company believes the allegations underlying the Texas Action have no basis in
fact and that this lawsuit is without merit. The Company has retained counsel
and is vigorously defending against these claims. The participants in the Texas
Action will be provided the opportunity to accept the settlement discussed
above. In addition, the Company participated in a mediation proceeding relating
to the Texas Action on October 23, 2001. During fiscal 2002, the Company
incurred and expensed legal fees associated with these claims of approximately
$0.7 million, however, an insurance claim for the aggregate amount incurred in
connection with the Texas Action in excess of applicable deductibles has been
filed by the Company. During the first quarter of fiscal 2002, one of the
insurance companies responsible for the claim, which had previously filed for
reorganization, was declared insolvent. The Company is working with regulatory
agencies to resolve and collect the monies due under this policy, although the
Company currently considers any potential recovery under this policy as
speculative. Accordingly, no claim for recovery is recorded as of June 30, 2002.
On March 6, 2002, the Company commenced an action in a state court in New Mexico
for various claims surrounding the now insolvent insurance carrier and the
Company's former insurance broker.
The Company is involved in various legal actions arising in the normal course of
business. After taking into consideration legal counsel's evaluation of such
actions, management is of the opinion that their outcome will not have a
significant effect on the Company's financial position or results of operations.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS.
None.
33
LightPath Technologies, Inc. - Form 10K, June 30, 2002
PART II
ITEM 5. MARKET FOR COMMON EQUITY AND RELATED STOCKHOLDER MATTERS.
Our Class A Common Stock was quoted on the Nasdaq SmallCap Market system
under the symbol "LPTHA" continuously from February 22, 1996 until July 12,
2000, when our Class A Common Stock moved to the Nasdaq National Market System
under the symbol "LPTH". We estimate there were approximately 300 holders of
record and approximately 19,000 beneficial holders of the Class A Common Stock
on August 19, 2002. We have not paid cash dividends in the past and we do not
intend to pay dividends in the foreseeable future. Declaration of dividends will
be at the discretion of the Board of Directors.
The following table sets forth the range of high and low bid prices for the
Class A Common Stock for the periods indicated, as reported by Nasdaq, the
principal system on which such securities are quoted. The quotation information
below reflects inter-dealer prices, without retail mark-up, mark-down or
commission, and may not represent actual transactions.
Class A
Fiscal Year Ended Common Stock
High Low
------ ------
June 30, 2002
-------------
Quarter ended September 30, 2001 $ 8.39 $ 1.78
Quarter ended December 31, 2001 $ 4.50 $ 1.92
Quarter ended March 31, 2002 $ 3.98 $ 1.36
Quarter ended June 30, 2002 $ 2.11 $ 0.83
June 30, 2001
-------------
Quarter ended September 30, 2000 $57.94 $26.50
Quarter ended December 31, 2000 $48.00 $10.56
Quarter ended March 31, 2001 $27.44 $10.25
Quarter ended June 30, 2001 $19.00 $ 6.65
On July 28, 1999, we issued $1,000,000 aggregate principal amount of 6%
Convertible Debentures (the "Debentures") due July 2002 and 427,350 attached
Class I warrants. The Debentures are immediately convertible at any time prior
to maturity into shares of Class A common stock, at a conversion price which is
equal to the lower of 80% of the five day average closing bid price of the
Company's Class A common stock at (i) the date of closing ($1.76) or (ii) the
conversion date. Each Class I warrant entitles the holder to purchase one share
of Class A common stock at $2.20 per share at any time through July 2004. In
addition, the placement agent received 150,000 Class J warrants to purchases
shares of the Company's Class A common stock at $2.20 per share at any time
through July 2004. In addition, the investors of the Debentures are entitled to
receive additional shares of Class A Common Stock in the event the Company
issues additional shares of its Class A Common Stock or securities convertible
into such class of securities at any time prior to July 28, 2001 under certain
circumstances. The Debentures and attached Class I Warrants were sold for
aggregate consideration of $1 million and resulted in net proceeds to the
Company of approximately $893,000 after deducting the cash fee paid to the
placement agent as well as the Company's legal and other associated costs.
On November 2, 1999, we completed a private placement of 408 shares of its
Series F Preferred Stock (the "Series F Stock"). The Series F Stock is
convertible into shares of Class A common stock, at a conversion price which is
equal to the lower of $5.00 or 80% of the five day average closing bid price of
the Company's Class A common stock at the conversion date. Each share of
Preferred Stock is convertible into Class A Common Stock at the option of
holder, subject to certain volume limitations during the first 9 months. Holders
of Series F Stock also received Class K warrants to acquire a total of 489,600
shares of Class A common stock in addition to the modification of terms on
warrants outstanding from prior private placements. The Class K Warrants may be
exercised at any time prior to expiration on November 2, 2002 at a price of
$5.00 per share. Each of the investors in the Series F Stock has previously
invested in our Series A, B and/or C Preferred Stock. In order to induce them to
invest in the Series F Stock, in November 1999 we agreed to reduce the
34
LightPath Technologies, Inc. - Form 10K, June 30, 2002
applicable exercise prices and extend the applicable expiration dates of all
outstanding warrants issued in connection with the sale of such Series A, B and
C Preferred Stock. The gross proceeds received for the private placement of
Series F Stock was $4,080,000, less placement fees and related expenses
resulting in net proceeds of approximately $3,900,000. We also issued 125,000
Class L warrants to the placement agent, with terms identical to Class K
Warrants.
On November 5, 1999 Robert Ripp entered into an agreement to purchase
62,500 shares of LightPath Class A Common Stock for $4.00 per share in
connection with his election to serve as Chairman of the Board of Directors. Mr.
Ripp also received warrants to purchase up to 281,250 shares of Class A Common
Stock at $6.00 per share at any time through November 10, 2009. The resale of
these shares were registered on a Form S-3 that became effective on January 18,
2000.
All of the Preferred Stock, Class C, Class D, Class E, Class F, Class G,
Class H, Class I, Class J, Class K and Class L Warrants, and the Class A Common
Stock and warrants issued to Robert Ripp, were issued to accredited investors in
private placements pursuant to Rule 506 of Regulation D promulgated under the
Securities Act of 1933, as amended.
On January 11, 2000, we called all of our outstanding Class A Warrants for
redemption on February 10, 2000 at the redemption price of $.05 per Class A
Warrant. Each Class A Warrant was exercisable at a price of $6.50 for one share
of Class A Common Stock and one Class B Warrant. As of March 31, 2000
substantially all of the outstanding 2.7 million Class A Warrants and
approximately 2 million Class B Warrants were exercised for net proceeds of
approximately $33 million. On May 15, 2000 we called all of our outstanding
Class B warrants for redemption on June 13, 2000 at the redemption price of $.05
per Class B Warrant. Each Class B Warrant was exercisable at a price of $8.75
for one share of Class A Common Stock. As of June 30, 2000 substantially all of
the outstanding Class B Warrants were exercised resulting in the issuance of
approximately 2.8 million shares of Class A Common Stock and net proceeds of
approximately $23.5 million were received.
On February 25, 1998, our Board of Directors declared a dividend
distribution of a right to purchase (a "Right") one share of Series D
Participating Preferred Stock for each outstanding share of Class A Common
Stock, $0.01 par value, of LightPath. The dividend became payable on the record
date May 1, 1998, to stockholders of record as of the close of business on that
date. Each Right entitles the registered holder to purchase from us one
one-hundredth of a share of Series D Participating Preferred Stock, $.01 par
value, of LightPath, at a price of $35.00 per share, subject to adjustment
following the occurrence of certain events. The description and terms of the
Rights are set forth in a Rights Agreement, dated as of May 1, 1998 between
LightPath and Continental Stock Transfer & Trust Company, as Rights Agent. A
copy of the Rights Agreement, including the Certificate of Designation, the form
of Rights Certificate and the Summary of Rights to Purchase Preferred Stock to
be provided to stockholders of LightPath, was attached as Exhibit 1 to our
Registration Statement filed on Form 8-A, dated April 28, 1998.
35
LightPath Technologies, Inc. - Form 10K, June 30, 2002
SELECTED HISTORICAL CONSOLIDATED FINANCIAL DATA
LightPath is providing the following information to assist you in your
financial analysis of the Company. The table below represents selected
historical consolidated statement of operations and balance sheet data of
LightPath Technologies, Inc. and subsidiaries. The selected financial data set
forth below for the years ended June 30, 1998 through 2002 are derived from, and
are qualified by reference to, the audited consolidated financial statements of
LightPath Technologies, Inc. and subsidiaries.
This information is only a summary. You should read it in conjunction with
LightPath's historical consolidated financial statements and related notes and
"Management's Discussion and Analysis of Financial Condition and Results of
Operations," which are included elsewhere herein.
In 000's except per share data Fiscal Year ended June 30
- -----------------------------------------------------------------------------------------------------------
2002 2001 2000 1999 1998
--------- --------- --------- --------- ---------
Total Revenues $ 12,507 $ 26,143 $ 2,266 $ 1,086 $ 758
Cost of Sales 15,157 15,284 1,310 409 290
Operating Loss (51,582) (63,126) (16,198) (2,857) (3,553)
Net loss applicable to common
shareholders $ (50,745) $ (60,853) $ (17,842) $ (3,817) $ (6,030)
========= ========= ========= ========= =========
Basic & Diluted Net Loss per share $ (2.56) $ (3.19) $ (1.86) $ (0.89) $ (2.00)
========= ========= ========= ========= =========
Number of shares used in per share
calculations 19,807 19,064 9,587 4,271 3,011
========= ========= ========= ========= =========
As of June 30,
Total Assets $ 36,977 $ 84,290 $ 100,713 $ 3,136 $ 6,308
Working Capital 14,138 35,375 59,129 1,001 4,561
Redeemable Preferred Stock -- 1,417 1,601 2,399 5,452
Redeemable Preferred Stock and
Stockholders' Equity $ 32,442 $ 78,024 $ 98,298 $ 2,708 $ 4,895
Notes: LightPath has not declared any dividends during the periods presented. No
dividend payments are expected in the foreseeable future.
The Company's operating loss during fiscal 2002 includes the following:
* Asset impairment charges of $1.5 million, recorded in the second
quarter, due to adjustments to the carrying value of a customer supply
agreement, associated with the acquisition of Horizon Photonics Inc.
in April 2000;
* Asset impairment charges of $4.9 million, recorded in the second
quarter, due to adjustments to the carrying value of certain
intangible assets, associated with the acquisition of Geltech Inc. in
September 2000;
* Asset impairment charges of $0.6 million, recorded in the second
quarter, related to the write down of certain excess manufacturing
equipment held for disposal;
* Asset impairment charges of $3.2 million, recorded in the fourth
quarter, due to certain manufacturing and other equipment and
leasehold improvements held for disposal in connection with the
Company's plan to relocate manufacturing operations and corporate
headquarters to Florida during fiscal 2003;
* A write down in the carrying value of our investment in LightChip of
$6.3 million, recorded in the fourth quarter, due to a decline in the
per share price of a subsequent third party round of financing
completed in May 2002;
* A restructuring charge of $1.1 million, recorded in the fourth
quarter, related to severance charges for involuntary employee
terminations and certain lease related costs in connection with the
36
LightPath Technologies, Inc. - Form 10K, June 30, 2002
Company's plan to relocate manufacturing operations and corporate
headquarters to Florida during fiscal 2003; and
* Stock-based compensation charges of $4.8 million.
The Company's operating loss during fiscal 2001 includes the following:
* Asset impairment charges of $13.4 million, recorded in the fourth
quarter, due to adjustments to the carrying value of a customer supply
agreement and related goodwill, associated with the acquisition of
Horizon Photonics Inc. in April 2000;
* A $9.1 million charge, recorded in the first quarter, related to the
acquired in process research and development in connection with the
acquisition of Geltech, Inc. in September 2000;
* An asset impairment charge of $0.4 million, recorded in the second
quarter, due to plans to dispose of certain excess manufacturing
equipment no longer utilized; and
* Stock-based compensation charges of $11.1 million.
The Company's operating loss during fiscal 2000 includes the following:
* A $4.2 million charge, recorded in the fourth quarter, related to the
acquired in process research and development recorded in connection
with the acquisition of Horizon Photonics, Inc.; and
* Stock-based compensation charges of $3.1 million.
During fiscal 2000, the Company called all of its outstanding Class A warrants
and Class B warrants for redemption. As of June 30, 2000, substantially all of
the warrants were exercised resulting in cash proceeds of approximately $56
million and the issuance of approximately 7.5 million shares of Class A common
stock.
37
ITEM 6. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS
THE PRIVATE SECURITIES LITIGATION REFORM ACT OF 1995 PROVIDES A SAFE HARBOR FOR
FORWARD LOOKING STATEMENTS MADE BY OR ON BEHALF OF THE COMPANY. ALL STATEMENTS
IN THIS "MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS" AND ELSEWHERE IN THIS REPORT, OTHER THAN STATEMENTS OF HISTORICAL
FACTS, WHICH ADDRESS ACTIVITIES, EVENTS OR DEVELOPMENTS THAT THE COMPANY EXPECTS
OR ANTICIPATES WILL OR MAY OCCUR IN THE FUTURE, INCLUDING SUCH THINGS AS FUTURE
CAPITAL EXPENDITURES, GROWTH, PRODUCT DEVELOPMENT, SALES, BUSINESS STRATEGY AND
OTHER SIMILAR MATTERS ARE FORWARD-LOOKING STATEMENTS. THESE FORWARD-LOOKING
STATEMENTS ARE BASED LARGELY ON THE COMPANY'S CURRENT EXPECTATIONS AND
ASSUMPTIONS AND ARE SUBJECT TO A NUMBER OF RISKS AND UNCERTAINTIES, MANY OF
WHICH ARE BEYOND THE COMPANY'S CONTROL. ACTUAL RESULTS COULD DIFFER MATERIALLY
FROM THE FORWARD-LOOKING STATEMENTS SET FORTH HEREIN AS A RESULT OF A NUMBER OF
FACTORS, INCLUDING, BUT NOT LIMITED TO, THE COMPANY'S EARLY STAGE OF
DEVELOPMENT, THE NEED FOR ADDITIONAL FINANCING, INTENSE COMPETITION IN VARIOUS
ASPECTS OF ITS BUSINESS AND OTHER RISKS DESCRIBED IN THE COMPANY'S REPORTS ON
FILE WITH THE SECURITIES AND EXCHANGE COMMISSION. IN LIGHT OF THESE RISKS AND
UNCERTAINTIES, ALL OF THE FORWARD-LOOKING STATEMENTS MADE HEREIN ARE QUALIFIED
BY THESE CAUTIONARY STATEMENTS AND THERE CAN BE NO ASSURANCE THAT THE ACTUAL
RESULTS OR DEVELOPMENTS ANTICIPATED BY THE COMPANY WILL BE REALIZED. THE COMPANY
UNDERTAKES NO OBLIGATION TO UPDATE OR REVISE ANY OF THE FORWARD LOOKING
STATEMENTS CONTAINED HEREIN.
ACQUISITIONS
GELTECH, INC.
On September 20, 2000, LightPath acquired all of the outstanding shares of
Geltech, Inc. (Geltech), a manufacturer of precision molded aspheric optics used
in the active telecommunication components markets, for an aggregate purchase
price of approximately $28.5 million (822,737 shares of LightPath Class A Common
Stock). In the first quarter of fiscal 2001, the Company recorded an immediate
non-recurring charge of $9.1 million related to the acquired in-process research
and development of Geltech. The value assigned to in-process research and
development ("IPR&D") was determined by the Company based on estimates of the
projected discounted cash flows from certain development projects including
diffraction gratings, waveguides, lens arrays and sub-assembly technologies.
These IPR&D programs were in various stages of completion ranging from 30% to
50% of completion, with estimated completion dates through December 2001 and
projected costs to complete of approximately $2.25 million. As of June 30, 2001
these IPR&D programs were not complete and a new completion date of June 2002
was established. Geltech's IPR&D programs did not generate sales in fiscal 2001
which was consistent with the revenue projections.
Geltech's IPR&D programs did not generate material sales from these
programs during the year ended June 30, 2002 which is consistent with the
revenue projections. During the second quarter of fiscal 2002 the Company
decided to defer further development of the diffraction gratings and waveguides,
projects which were in process at the acquisition of Geltech, due primarily to
the continued decline in the market for telecommunications components. The
sub-assembly technologies project concluded in the third quarter, however sales
during the quarter were not material. The development of the lens arrays project
was concluded during the fourth quarter of fiscal 2002 which resulted in an
immaterial amount of sales during the fourth quarter. Future sales will depend
on customer acceptance of this product line.
For fiscal 2002, the consolidated research and development expenditures
budget for LightPath was approximately $7.7 million, which included
approximately $1.7 million related to the ongoing development efforts which were
in process at the acquisition of Geltech. For the year ended June 30, 2002, we
estimate approximately $1.3 million of research and development expenditures
were incurred in connection with these efforts.
HORIZON PHOTONICS, INC.
On April 14, 2000, LightPath acquired Horizon Photonics, Inc. (Horizon), a
company engaged in the automated production of passive optical components for
the telecommunications and data communications markets, for a total purchase
price of approximately $40.2 million ($1 million cash and 1.4 million shares of
38
LightPath Technologies, Inc. - Form 10K, June 30, 2002
Class A Common Stock). In the fourth quarter of fiscal 2000, the Company
recorded an immediate non-recurring charge of $4.2 million, related to the
acquired in-process research and development of Horizon. The in-process research
and development ("IPR&D") related to micro-collimator products as well as active
alignment and isolator injection molding technologies that were under
development at the time of acquisition. These IPR&D programs were in various
stages of completion ranging from 50% to 60%, with estimated completion dates
through June 2001 and estimated costs to complete the projects of $1.1 million.
As of June 30, 2001 these IPR&D programs were not completed and a revised
completion date of June 2002 was established. Horizon's IPR&D programs did not
generate sales in fiscal 2001 which was consistent with the revenue projections.
Horizon's IPR&D programs generated sales of approximately $2.4 million
during the year ended June 30, 2002. The micro-collimator program has been
transferred to the Albuquerque development group. The isolator injection molding
technologies was completed in late December 2001 and accounts for all of the
IPR&D generated sales. The active alignment program was completed during the
fourth quarter of fiscal 2002.
For fiscal 2002, the consolidated research and development expenditures
budget for LightPath was approximately $7.7 million, which included
approximately $1.6 million related to the ongoing development efforts which were
in process at the acquisition of Horizon. For the year ended June 30, 2002, we
estimate approximately $1.6 million of research and development expenditures
were incurred in connection with these efforts.
YEAR ENDED JUNE 30, 2002 COMPARED TO THE YEAR ENDED JUNE 30, 2001
CONSOLIDATED OPERATIONS
Our consolidated revenues totaled $12.5 million for fiscal 2002, a decrease
of approximately $13.6 million or 52% compared to revenues for fiscal 2001. The
decrease was primarily attributable to a decrease in telecom product sales of
$12.7 million or 60%, and a $0.9 million or 18% decrease in traditional optics
sales. Sales generated from the acquired Geltech business (September 2000)
accounted for $5.1 million or 41% of the total revenue in fiscal 2002 as
compared to $7.8 million or 30% of total revenue for the comparable period of
fiscal 2001.
In fiscal 2002, consolidated cost of sales was 121% of product sales, an
increase from the comparable period last year in which the Company reported cost
of sales of 58.5%. During fiscal 2002, the Company recorded a write down of
inventory of approximately $3 million. Excluding inventory write downs, cost of
sales during the year would have been approximately 97%, an increase of 38.5%
from the comparable period of fiscal 2001 (see discussion below). Substantially
all of the increase was due to the reduction in sales for telecom products, and
the underutilization of manufacturing facilities and staff. To counter these
cost overages, we reduced the manufacturing staff, eliminated unprofitable
traditional optic products, and closed our Auburn, California facility. The
changes implemented in fiscal 2002 resulted in a total decrease in manufacturing
personnel of 45%. During the fourth quarter we announced a plan to consolidate
all of our lens manufacturing from Albuquerque to Orlando, Florida by September
30, 2002. The announced consolidation will further reduce our manufacturing
staff by approximately 50 persons or 30% of total employees at June 30, 2002. In
addition, the Company recorded asset impairment charges of $3.2 million to write
down the carrying value to estimated fair value less costs to sell of certain
manufacturing and other equipment and leasehold improvements held for disposal
in connection with the Company's plan to relocate manufacturing operations and
corporate headquarters to Florida during fiscal 2003.It is anticipated that
these measures will improve our cost of sales in future quarters as we work to
balance our manufacturing capabilities and product lines. However, economic
conditions may result in pricing pressure in fiscal 2003 which could reduce
margins.
During fiscal 2002, total inventory decreased modestly from prior levels
before consideration of the inventory write downs recorded during fiscal 2002.
Raw materials continue to make up the majority of our inventory at $1.7 million
or 69% of total inventory at June 30, 2002. We have approximately $1.4 million
39
LightPath Technologies, Inc. - Form 10K, June 30, 2002
of raw materials on hand specifically used in the production of isolators that
have long lead times and the Company has elected to maintain a sufficient
quantity of these materials.
Throughout fiscal 2002, the Company noted several factors that caused us to
re-evaluate the carrying value of inventory resulting in charges to write down
inventory to net realizable value, or to write off inventory to be disposed of
given no alternative future use was identified. Total inventory charges of $1.9
million and $1.1 million were recorded during fiscal 2002 related to finished
goods/work in process and raw materials inventory, respectively. Specifically,
during the first and second quarters, inventory charges of $1.3 million were
recorded as we continued to note declining quarterly sales from previous levels,
lack of growth in sales orders and no sales in certain product areas where we
had purchased raw materials. The Company also received notification that certain
lenses and raw materials did not pass qualification requirements for their
particular applications during the second quarter. During the fourth quarter,
our manufacturing group changed the production methodology for performance
improvements rendering some products obsolete that resulted in charges of $0.5
million. During the fourth quarter, we also noted that the value of certain
finished lens and raw materials inventory had diminished due to changes in
market conditions as some competitors reduced prices for similar products to a
level below our cost resulting in inventory write downs of $0.4 million.
Finally, the Company noted uncertainty regarding the realization of certain
finished products on hand due to cancelled purchase orders which resulted in
write downs of $0.8 million during the fourth quarter.
During fiscal 2002, selling, general and administrative costs decreased by
$7.7 million from fiscal 2001 to $11.6 million, which includes $2.2 million
accrued for legal fees and the proposed litigation settlement. Fiscal 2001
results include $2.3 million related to litigation settlement costs and legal
fees. The decreases were primarily in administration and manufacturing support
personnel costs.
The Company's operating loss during fiscal 2002 includes the following
non-cash charges: asset impairment charges of $1.5 million, recorded in the
second quarter, due to adjustments to the carrying value of a customer supply
agreement, associated with the acquisition of Horizon Photonics Inc. in April
2000; asset impairment charges of $4.9 million, recorded in the second quarter,
due to adjustments to the carrying value of certain intangible assets,
associated with the acquisition of Geltech Inc. in September 2000; asset
impairment charges of $0.6 million, recorded in the second quarter, related to
the write down of certain excess manufacturing equipment held for disposal;
asset impairment charges of $3.2 million, recorded in the fourth quarter,
related to the write down of certain manufacturing and other equipment and
leasehold improvements held for disposal in connection with the Company's plan
to relocate manufacturing operations and corporate headquarters to Florida
during fiscal 2003; a write down in the carrying value of our investment in
LightChip of $6.3 million, recorded in the fourth quarter, due to the per share
price of a third party round of financing completed in May 2002; a restructuring
charge of $1.1 million, recorded in the fourth quarter, related to severance
charges for involuntary employee terminations and certain lease related costs in
connection with the Company's plan to relocate manufacturing operations and
corporate headquarters to Florida during fiscal 2003; and stock-based
compensation charges of $4.8 million. In addition, the Company reversed the net
deferred tax liability of approximately $3.3 million established in connection
with the non-taxable purchase of Geltech against the related intangible assets
prior to the impairment charge recorded in the second quarter as the carrying
value of the remaining Geltech intangible assets was reduced in connection with
the impairment.
Research and development costs remained at approximately $7.1 million in
both fiscal 2002 and 2001. The majority of research and development work
consisted of expenses associated with automation development and research for
products in the areas of telecommunication switches, isolators and next
generation optical subassemblies, waveguides and lens arrays. Throughout the
fiscal year, in an effort to control research and development costs, the Company
has reduced development staff levels, deferred additional expenditures on the
switch project and assigned the New Jersey development facility lease as of
September 2002.
40
LightPath Technologies, Inc. - Form 10K, June 30, 2002
The Company recorded a charge of approximately $1.1 million in the fourth
quarter in connection with the Company's announced plans to consolidate and
relocate its corporate headquarters and manufacturing facilities based in
Albuquerque, New Mexico to Orlando, Florida by December 31, 2002. We believe a
single site will bring a sharper focus in customer support, a reduction in
duplicate process engineering resources and a higher capacity utilization to
significantly improve the cost competitiveness of our products. Costs incurred
consist primarily of severance costs for involuntary employee terminations for
67 manufacturing and administrative employees and certain exit costs. As of June
30, 2002, none of the accrued costs were paid and management expects to pay all
employee severance costs prior to December 31, 2002 and lease costs will be
substantially paid by June 30, 2003.
Investment and other income included a non-recurring gain of approximately
$390,000 related to the first quarter sale of certain assets located in Auburn,
CA, while interest earned on investments decreased approximately $1.7 million
during fiscal 2002 as a result of lower interest rates and a decrease in cash
balances. Interest and other expenses during fiscal 2002 and 2001 were not
significant.
Net loss of $50.7 million in fiscal 2002 includes $29.2 million from the
non-cash charges described above, $1.1 million related to the restructuring and
consolidation of facilities, $2.2 million related to litigation settlement costs
and $3 million for inventory write-offs, which if excluded, would have resulted
in a net loss of $15.2 million. This compares to fiscal 2001 in which the
Company reported a net loss of $60.8 million including $47.6 million in non-cash
charges and $2.9 million related to litigation settlement costs and inventory
write-offs, which if excluded, would have resulted in a net loss of $10.3
million. The $4.9 million increase in net loss in 2002 excluding the non-cash
and other charges is due primarily to the $13.6 million decrease in total
revenues, offset by decreased cost of sales of $2.4 million while decreases of
$7.7 million in operating costs primarily in selling, general and administrative
expense were offset by increased other expenses of $1.4 million. Net loss
applicable to common shareholders of $50.7 million for fiscal 2002 included an
additional charge of $61,906 attributable to the premium on our outstanding
preferred stock. Net loss per share of $2.56 in fiscal 2002 decreased $0.63
compared to the fiscal 2001 net loss per share of $3.19. Net loss applicable to
common shareholders for fiscal 2001 of $60.9 million included $89,549
attributable to the premium on the Company's outstanding preferred stock.
At the end of the fourth quarter, the Company announced the appointment of
Ken Brizel as President and CEO and his election to the Board of Directors. Mr.
Brizel has spent 21 years in the communications and microelectronics industries,
most recently as Senior Vice President Strategy and Business Development for
Oplink Communications.
TELECOM SEGMENT
For fiscal 2002, telecom product sales decreased 60% to approximately $8.3
million from $21.1 million for fiscal 2001. The telecom segment sales in fiscal
2002 include isolator sales of $4.4 million, $1.8 million of collimator product
sales and $2.1 million of active telecom components sales.
The telecom segment incurred an operating loss of $11.7 million for fiscal
2002 as compared to a loss of $7.2 million for the comparable period last year
due primarily to decreased sales, reduced margins due to underutilization of
capacity, inventory write-offs and increased research and development costs
associated with the switch project.
The decrease in telecom sales for fiscal 2002 together with the reduced
sales backlog reflect the general market condition for optical components and
the broader telecommunications sector. We continue to work closely with our
customers to manage their inventory levels as well as focus on next generation
products with them. We have focused on design wins for next generation systems
however overall spending levels continue to be restrained. During the third
quarter of fiscal 2002, the Company announced five new products designed for use
in both long-haul and metropolitan area. Each new product utilizes advanced
41
LightPath Technologies, Inc. - Form 10K, June 30, 2002
manufacturing technology to `build-in' much of the optical alignment work that
was formerly performed by the customer. They also underscore LightPath's
strategic directive of broadening our base of innovative optical components and
assemblies by combining application specific engineering with automated
manufacturing.
During the fourth quarter we announced we would consolidate lens product
lines in Florida, relocate corporate headquarters in Florida, and reorganize
internally into three groups; the Optical Lens Group; the Laser Component Group;
and the Optical Integration Group. The Optical Lens Group will manage the
collimator and aspheric lens product which continues to be a core capability for
LightPath which will be consolidated in the Orlando, Florida facility. In
response to our customers' requirements for a second site capability and the
demand opportunity for comprehensive optical packing solutions, we intend to
increase our emphasis on the integrated platform segment of our business through
the Laser Component Group. We have had great success with our isolator product
line, and as our customers ask for more demanding optical performance, we see a
great opportunity to provide the entire solution from laser to fiber. The Laser
Component Group will be investing a modest amount in capital expenditures and
increased research and development, in support of optical generation and
detection applications, such as transmitters, transceivers and pumps. The
Optical Integration Group will allow LightPath to augment current passive
optical packages such as OASIS(TM) and Vectra(TM) collimator arrays with new
innovative passive optical modules, such as multiport and hybrid devices, to
provide effective optical management solutions for our customers.
TRADITIONAL OPTICS SEGMENT
During fiscal 2002, approximately $4.2 million of segment sales were
comprised of $2.9 million in finished lens products and $1.3 million from laser
optic lens sales, compared with segment sales of $5.1 million for the comparable
period last year. During the first quarter of fiscal 2002, we stopped
manufacturing several product lines, including data storage lenses, due to
unfavorable margins. In addition, due to the closure of the Auburn, CA facility,
we consolidated the manufacturing of Geltech's finished lens products into the
Orlando, FL facility.
The traditional optics segment incurred an operating loss of approximately
$4 million for fiscal 2002 as compared to operating income of approximately
$73,000 for the comparable period last year. The increased loss was primarily
due to reduced sales, unfavorable margins and inventory write-offs we incurred
during fiscal 2002.
During the fourth quarter we announced we would consolidate lens product
lines in Florida and reorganize internally. The Optical Lens Group will include
optical lens business and it will be consolidated in the Orlando, Florida
facility. While we have recently signed a strategic agreement with Hikari Glass
to manufacture GRADIUM(TM) glass for LightPath and have engaged with suppliers
in the Far East to secure low cost lenses, we intend to further reduce overhead
and excess capacity in our lens facilities. The single site will bring a
combined customer support, a reduction in duplicate process engineering and a
higher capacity utilization which should significantly improve the cost
competitiveness of our products. As part of our initiative, we intend to
aggressively extend our offerings to non-telecom business segments.
YEAR ENDED JUNE 30, 2001 COMPARED TO THE YEAR ENDED JUNE 30, 2000
CONSOLIDATED OPERATIONS
Our consolidated revenues totaled $26.1 million for fiscal 2001, an
increase of approximately $23.9 million or 1054% over fiscal 2000. The growth
was primarily attributable from increases of $12.1 million (51%) in isolator and
other sales, $7.8 million (33%) in active telecom components and finished lenses
and $4 million (16%) primarily in collimator products. Sales generated from
acquired businesses accounted for $19.9 million or 83% of the increase in total
revenue.
42
LightPath Technologies, Inc. - Form 10K, June 30, 2002
During fiscal 2001, consolidated cost of sales was 58% of total revenues, a
decrease from fiscal 2000, when cost of sales was 62% of product sales (excludes
product development fees). The decrease was primarily due to increased margins
on isolator products.
During fiscal 2001, selling, general and administrative costs increased by
$13.3 million from fiscal 2000 to $19.3 million, due to $1.6 million incurred
for litigation settlement, $0.7 million for legal costs incurred in E
shareholder litigation, $5.3 million of administrative costs incurred by
acquired companies, Horizon and Geltech, and $5.7 million from increases in
LightPath personnel in administration, manufacturing overhead and support.
We incurred non-cash charges totaling $47.6 million during fiscal 2001,
including $13.7 million for impairment of goodwill and intangible assets related
to the deferral of sales by a significant customer and consolidation of
traditional optics facilities, $11.2 million in non-cash stock-based
compensation charges, $13.6 million in amortization of goodwill and intangibles
from acquisitions, and a non-recurring charge of $9.1 million for in-process
research and development from the acquisition of Geltech.
Research and development costs increased by approximately $5.6 million from
fiscal 2000 to $7.1 million in fiscal 2001, of which $2.1 million was due to
acquisitions. The majority of development work consisted of expenses associated
with the Gen3 collimator assembly, LP1600 opto-mechanical switch, lens arrays
and the New Jersey facility where development work is on-going to expand the
Company's products to the areas of switches, interconnects and cross-connects
for the telecommunications industry. Our acquired businesses continue their
efforts in the area of isolators and next generation optical subassemblies,
diffraction gratings, waveguides, lens arrays and sub-assembly technologies.
Investment income increased approximately $1.4 million in fiscal 2001 due
to the increase in interest earned on temporary investments as a result of an
increase in cash balances. Interest expense was not significant in 2001. In July
1999, we issued $1 million aggregate principal amount of 6% convertible
debentures and paid approximately $10,000 of interest expense. We recognized an
interest charge of $381,869 in the first quarter of fiscal year 2000 for the
beneficial conversion feature associated with the Debentures and $43,926 of the
remaining debt discount was amortized from the issuance date through September
24, 1999 when all of the Debentures were converted and related warrants were
exercised resulting in the issuance of approximately one million shares of Class
A Common Stock.
Net loss of $60.8 million for fiscal 2001 was an increase of approximately $45.2
million from fiscal 2000. Of this amount, $47.6 million related to non-cash
charges described above and $2.3 million related to one-time charges for a
litigation settlement and the legal costs associated with E shareholder suit.
Non-cash charges in 2000 were approximately $9.8 million. Excluding the non-cash
and one time charges from both years, the remaining $5.1 million increase was
due primarily to increased cost of sales and operating costs, primarily in
selling, general and administrative expense and a $5.6 million increase in
research and development costs. These increased costs were partially offset by
the $23.9 million increase in total revenues, $1.4 million increase in interest
income and the $402,000 reduction of interest expense during fiscal 2001. Net
loss applicable to common shareholders of $60.9 million for fiscal 2001 included
an additional charge of $89,549 attributable to the premium on our outstanding
preferred stock. Net loss per share of $(3.19) in fiscal 2001 increased $1.33
compared to the fiscal 2000 net loss per share of $(1.86). Net loss applicable
to common shareholders of $17.8 million in fiscal 2000 included an additional
charge of $2.1 million for the imputed dividend and $137,281 attributable to the
premium on the Company's outstanding preferred stock.
TELECOM SEGMENT
During fiscal 2001, telecom product sales increased to approximately $21 million
from $1.5 million for fiscal 2000. The telecom segment results include isolator
sales of $13 million, $4.2 million of collimator product sales and $3.8 million
of aspheric optics for active telecom product sales. Sales generated from
acquired businesses accounted for $15.8 million or 81% of the increase in
telecom revenue.
43
LightPath Technologies, Inc. - Form 10K, June 30, 2002
Sales to Agere Systems, Inc. ("Agere") (formerly the Microelectronics division
of Lucent Technologies Inc.) represented 55% of the telecom sales for fiscal
2001.
In August 2000, we introduced the LP1600 opto-mechanical switch which employs a
patented retro-reflecting mirror design in conjunction with our Gen3 collimator.
Due to the economic environment we elected to suspend expenses related to the
launch of this product. The telecom segment incurred an operating loss of $7.2
million for fiscal 2001 as compared to an operating loss of $7.5 million for
fiscal 2000.
Significant events which impacted our telecom segment during fiscal 2001
included:
* Recorded telecom sales of $21 million. The completion of the expansion
of the Horizon automated manufacturing facility which is dedicated to
large volume isolator production and the development of
next-generation optical subassemblies contributed to the overall sales
growth as well as the inclusion of sales from Geltech's telecom
products. Horizon released a new line of isolator assemblies for
application in the metro and access telecom markets. This line is
based on a flexible manufacturing platform which can address a wide
range of customer specifications while attracting lower cost
applications;
* The September 20, 2000 expansion of our telecom products to include
active components through the acquisition of privately held Geltech.
We began acquisition talks with Geltech, due to our interest in its
precision molded aspheric optics used in the active telecommunication
components markets. The acquisition purchase price was $27.5 million
which was paid through the issuance of 822,737 shares of Class A
common stock plus approximately $1 million in acquisition costs for an
aggregate purchase price of approximately $28.5 million;
* Changes to LightPath's management team included the addition of Dennis
Yost as LightPath's Chief Operating Officer and promotion of Bob
Cullen to Executive Vice President in charge of Technology
Integration. Mr. Yost will focus on the advancement of our telecom
lines, specifically collimators and arrays. Mr. Cullen, the current
President of Horizon, expanded his role to assist in the further
automation of the Company including manufacturing, packaging, assembly
and test methods; and
* The Company's additional investment in LightChip, Inc. of $7.2 million
(August 2000 private placement significant investors included Berkeley
International, Morgenthaler Ventures, J.P. Morgan Capital, AT&T
Ventures and LightPath).
TRADITIONAL OPTICS SEGMENT
During fiscal 2001, the majority of our traditional optics product sales of
approximately $5.1 million were from Geltech's lens sales and existing customers
for laser optic lenses. Traditional optics sales in fiscal 2000 were
approximately $768,000. The growth was primarily due to the acquisition of
Geltech's traditional optics business in September 2000 which accounted for $4
million of traditional optics product sales in fiscal 2001. Geltech's products
are used in data storage and by manufacturers of medical equipment. The majority
of Geltech's sales are due to custom quotations as they have no direct
distribution channels. Revenues for fiscal 2000 included approximately $167,000
in license fees and government funded subcontracts. The traditional optics
segment reported operating income of approximately $73,000 for fiscal 2001 as
compared to an operating loss of approximately $365,000 for fiscal year 2000.
CRITICAL ACCOUNTING POLICIES
The preparation of the Consolidated Financial Statements in conformity with
generally accepted accounting principles requires the Company to select
appropriate company accounting policies, and to make judgments and estimates
affecting the application of those accounting policies. In applying the
Company's accounting policies, different business conditions or the use of
different assumptions may result in materially different amounts reported in the
Consolidated Financial Statements.
44
LightPath Technologies, Inc. - Form 10K, June 30, 2002
In response to the Securities and Exchange Commission's ("SEC") Release No.
33-8040, "Cautionary Advice Regarding Disclosure About Critical Accounting
Policies," the Company has identified the most critical accounting principles
upon which the Company's financial status depends. The critical principles were
determined by considering accounting policies that involve the most complex or
subjective decisions or assessments. The most critical accounting principles
identified relate to: (i) revenue recognition; (ii) inventory valuation; (iii)
long-lived assets; (iv) investment in LightChip and (v) intangible assets. These
critical accounting policies and the Company's other significant accounting
policies are disclosed in Note 1 to the Company's Consolidated Financial
Statements.
REVENUE RECOGNITION. The Company recognizes revenue upon shipment of the product
provided that persuasive evidence of a final agreement exists, delivery has
occurred, the selling price is fixed or determinable and collectibility is
reasonably assured.
INVENTORY VALUATION. The Company regularly assesses the valuation of inventories
and writes down those inventories that are obsolete or in excess of forecasted
usage to estimated net realizable value. Estimates of realizable value are based
upon the Company's analyses and assumptions including, but not limited to,
forecasted sales levels by product, expected product lifecycle, product
development plans and future demand requirements. If market conditions are less
favorable than the Company's forecast or actual demand from customers is lower
than the Company's estimates, the Company may be required to record additional
inventory write-downs. If demand is higher than expected, the Company may sell
inventories that have previously been written down.
LONG-LIVED ASSETS. The Company evaluates the carrying value of long-lived
assets, including property and equipment, whenever certain events or changes in
circumstances indicate that the carrying amount may not be recoverable. Such
events or circumstances include, but are not limited to, a prolonged industry
downturn, a significant decline in the Company's market value, or significant
reductions in projected future cash flows. If facts and circumstances warrant
such a review, under the current standard, a long-lived asset would be impaired
if future undiscounted cash flows, without consideration of interest, are
insufficient to recover the carrying amount of the long-lived asset. Once deemed
impaired, the long-lived asset is written down to its fair value which could be
considerably less than the carrying amount or future undiscounted cash flows.
The determination of future cash flows and, if required, fair value of a
long-lived asset is by its nature, a highly subjective judgment. Fair value is
generally determined by calculating the discounted future cash flows using a
discount rate based upon the Company's weighted average cost of capital.
Significant judgments and assumptions are required in the forecast of future
operating results used in the preparation of the estimated future cash flows,
including long-term forecasts of the amounts and timing of overall market growth
and the Company's percentage of that market, groupings of assets, discount rate
and terminal growth rates. Changes in these estimates could have a material
adverse effect on the assessment of property and equipment, thereby requiring
the Company to write down the assets.
INVESTMENT IN LIGHTCHIP. The Company accounts for its investment in LightChip
under the cost method of accounting as prescribed by APB 18 given its ownership
percentage of voting shares is approximately 13% at June 30, 2002. In addition,
the Company regularly assesses the carrying value of its investment in LightChip
to determine if a write down is necessary. The fair value of privately held
securities is highly subjective and involves inherent risk. While there are
several valuation techniques that could provide objective evidence of the value
of equity securities, the Company considers cash transactions with independent
third parties involving similar equity securities to be the strongest objective
evidence of fair value. The carrying value of our investment at June 30, 2002 is
based on the most recent price per share of a cash transaction involving third
parties. Should a future round of financing be completed at a per share price
less than the current carrying value, a write down would be required.
INTANGIBLE ASSETS. The Company generally obtains intangible assets in connection
with a purchase (for example, in a business combination). The assignment of
value to individual intangible assets generally requires the use of a
45
LightPath Technologies, Inc. - Form 10K, June 30, 2002
specialist, such as an appraiser. The assumptions used in the appraisal process
are forward-looking, and thus subject to significant judgment. Because
individual intangible assets may be: (i) expensed immediately upon acquisition
(for example, purchased in-process research and development assets); or (ii)
amortized over their estimated useful life (for example, acquired technology or
goodwill), their assigned values could have a material affect on current and
future period results of operations. Further, intangible assets are subject to
the same judgments when evaluating for impairment as other long-lived assets.
LIQUIDITY AND CAPITAL RESOURCES
We financed our initial operations through private placements of equity and
debt until February 1996 when our initial public offering of units of common
stock and Class A and B Warrants generated net proceeds of approximately $7.2
million. From June 1997 through November 1999, we completed four preferred stock
and one convertible debt private placements which generated total net proceeds
of approximately $12 million. During fiscal 2000 and 2001, we received net
proceeds of approximately $67.6 million from the exercise of stock options and
warrants issued at the initial public offering or in connection with previous
private placements.
The optical components markets have experienced a severe downturn for the
last eighteen months, resulting in a significant decline in the demand for our
products as well as our competitors. We believe the Company has the financial
resources, and will take the necessary actions, to manage through this downturn.
However, a prolonged downturn in the optical components markets or the
unsuccessful move to sell our optical components into non-telecom markets,
failure by the Company to anticipate or respond to product technological
changes, changes by our customers or suppliers, or any significant delays in the
introduction of new products, could have a material adverse effect on the
Company's financial condition, operating results or cash flows.
Cash used in operations for fiscal 2002 was approximately $12.9 million, a
decrease of approximately $2.1 million from fiscal 2001. Throughout fiscal 2002
we reduced our cash expenditures through improved manufacturing efficiencies,
suspension of selected development projects and consolidation of equipment and
facilities. During the fourth quarter of fiscal 2002, we announced that we would
consolidate lens product lines in Florida, close the New Mexico facilities and
reorganize internally which will further decrease our cash requirements for
fiscal 2003. While the Company has no firm commitments for any future financing
at this time, we have a cash balance of approximately $13.2 million at June 30,
2002, and we believe that our financial resources will be sufficient to finance
the Company's operations and capital expenditures, excluding acquisitions, for
the next twelve months.
In fiscal 2002 working capital provided was $5.6 million primarily due to
the write down of inventory balances and the accrual of certain restructuring
and settlement costs which were not paid as of June 30, 2002. In fiscal 2001
working capital requirements were $4.5 million primarily due to growth in
accounts receivable and inventory balances. We expect to continue to incur net
losses until such time, if ever, as we obtain broader market acceptance for our
products at sale prices and volumes which provide adequate gross revenues to
offset our operating costs.
During fiscal 2002, we expended approximately $2.8 million for capital
equipment and patent protection, offset by proceeds from the sale of assets of
approximately $0.9 million. In addition we invested an additional $1.5 million
in LightChip. The majority of the capital expenditures during fiscal 2002 were
related to the equipment used to enhance or expand our manufacturing facilities.
The Company's plan for fiscal 2003 estimates approximately $1.6 million will be
expended to enhance or expand our manufacturing facilities and to provide for
growth in passive and active assemblies, however, we may spend more or less
depending on circumstances.
46
LightPath Technologies, Inc. - Form 10K, June 30, 2002
The table below presents the Company's contractual obligations as of June
30, 2002. The capital lease obligations appear on the Company's balance sheet.
The operating leases relate to real estate and are commitments which are
expensed as paid per the terms of the related contract, except for operating
lease obligations related to operations that will be discontinued in fiscal 2003
in connection with the Company's plan to relocate and consolidate operations to
Orlando Florida. The lease obligations related to locations that will not be
continued are included in the employee severance and exit costs accrual on the
Company's balance sheet.
CONTRACTUAL OBLIGATIONS
(dollars in 000's) Total Stated Maturity Comments
------------------ ----- --------------- --------
Capital lease
obligations $ 10 Sept. 2002 Amortizes monthly
Note payable $ 78 Jul. 1999 Negotiating settlement with
third party
Operating leases $ 4,200 2003-2008 Real estate leases with
monthly payments
Employee severance and
other exit costs $ 1,059 Apr. 2005 Severance costs to be paid by
12/31/02. Lease costs will be
substantially paid by 6/30/03
Legal settlement
payments on Delaware Not Settlement costs to be paid by
action $ 1,500 applicable September 30, 2002
We currently hold an investment in LightChip who has indicated they may
require additional funding in the calendar year 2003. If the Company does not
participate in future equity funding its ownership percentage would be diluted.
In addition, if future funding is at a per share price that is lower than the
cost of our previous investment in LightChip, we will be required to write down
our investment to the current market value.
RECENT ACCOUNTING PRONOUNCEMENTS
In June 2002, the FASB issued Statement No. 146, ACCOUNTING FOR COSTS
ASSOCIATED WITH EXIT OR DISPOSAL ACTIVITIES which the Company will be required
to adopt for any future costs associated with an exit or disposal activity. The
Company does not believe the adoption of SFAS 146, effective July 1, 2002, will
have a material effect on our results of operations or financial position.
On October 3, 2001 the FASB issued Statement No. 144, "Accounting for the
Impairment or Disposal of Long-Lived Assets," which addresses financial
accounting and reporting for the impairment or disposal of long-lived assets.
SFAS 144 supercedes SFAS 121, "Accounting for the Impairment of Long-Lived
Assets and for Long-Lived Assets to Be Disposed Of," but retains many of the
fundamental provisions of SFAS 121. SFAS 144 also supercedes APB Opinion No. 30,
"Reporting the Results of Operations, Reporting the Effects of Disposal of a
Segment of a Business, and Extraordinary, Unusual and Infrequently Occurring
Events and Transactions." SFAS 144 retains the requirement in Opinion 30 to
report separately discontinued operations and extends that reporting to a
component of an entity that either has been disposed of or is classified as held
for sale. SFAS 144 is effective for fiscal years beginning after December 15,
2001 and interim periods within those fiscal years. LightPath does not expect
the adoption of SFAS 144, effective July 1, 2002, to have a material impact on
its financial statements or results of operations.
In June 2001, the FASB issued Statement No. 141, BUSINESS COMBINATIONS, and
Statement No. 142, GOODWILL AND OTHER INTANGIBLE ASSETS. Statement 141 requires
that the purchase method of accounting be used for all business combinations
initiated after June 30, 2001 as well as all purchase method business
47
LightPath Technologies, Inc. - Form 10K, June 30, 2002
combinations completed after June 30, 2001. Statement 141 also specifies
criteria intangible assets acquired in a purchase method business combination
must meet to be recognized and reported apart from goodwill. Statement 142 will
require that goodwill and intangible assets with indefinite useful lives no
longer be amortized, but instead be tested for impairment at least annually in
accordance with the provisions of Statement 142. Statement 142 will also require
that intangible assets with estimable useful lives be amortized over their
respective estimated useful lives to their estimated residual values, if any,
and reviewed for impairment in accordance with FAS Statement No. 121, ACCOUNTING
FOR THE IMPAIRMENT OF LONG-LIVED ASSETS AND FOR LONG-LIVED ASSETS TO BE DISPOSED
OF.
The Company is required to adopt the provisions of Statement 141 and
Statement 142 on July 1, 2002. The Company had no business combinations
initiated subsequent to July 1, 2001.
Upon adoption of Statement 142, the Company is required to evaluate its
existing intangible assets and goodwill that were acquired in a prior purchase
business combinations, and to make any necessary reclassifications in order to
conform with the new criteria in Statement 141 for recognition apart from
goodwill. Upon adoption of Statement 142, the Company will be required to
reassess the useful lives and residual values of all intangible assets acquired,
and make any necessary amortization period adjustments by the end of the first
interim period after adoption. In addition, to the extent an intangible asset is
identified as having an indefinite useful life, the Company will be required to
test the intangible asset for impairment in accordance with the provisions of
Statement 142 within the first interim period. Any impairment loss will be
measured as of the date of adoption and recognized as the cumulative effect of a
change in accounting principle in the first interim period.
In connection with Statement 142's transitional goodwill impairment
evaluation, the Statement will require the Company to perform an assessment of
whether there is an indication that goodwill is impaired as of the date of
adoption. To accomplish this, the Company must identify its reporting units and
determine the carrying value of each reporting unit by assigning the assets and
liabilities, including the existing goodwill and intangible assets, to those
reporting units as of the date of adoption. The Company will then have up to six
months from the date of adoption to determine the fair value of each reporting
unit and compare it to the reporting unit's carrying amount. To the extent a
reporting unit's carrying amount exceeds its fair value, an indication exists
that the reporting unit's goodwill may be impaired and the Company must perform
the second step of the transitional impairment test. In the second step, the
Company must compare the implied fair value of the reporting unit's goodwill,
determined by allocating the reporting unit's fair value to all of it assets
(recognized and unrecognized) and liabilities in a manner similar to a purchase
price allocation in accordance with Statement 141, to its carrying amount, both
of which would be measured as of the date of adoption. This second step is
required to be completed as soon as possible, but no later than the end of the
year of adoption. Any transitional impairment loss will be recognized as the
cumulative effect of a change in accounting principle in the Company's statement
of operations.
The Company has unamortized goodwill of approximately $2.3 million
remaining at July 1, 2002, which will be subject to the transition provisions of
Statements 141 and 142. Amortization expense related to goodwill was $1.3
million, $2.95 million and $2.95 million for the years ended June 30, 2002, 2001
and 2000, respectively. Amortization expense in fiscal 2003 would have been $1.3
million. Because of the extensive effort needed to comply with adopting
Statements 141 and 142, it is not practicable to reasonably estimate the impact
of adopting these Statements on the Company's financial statements at the date
of this report, including whether it will be required to recognize any
transitional impairment losses as the cumulative effect of a change in
accounting principle.
48
LightPath Technologies, Inc. - Form 10K, June 30, 2002
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
LightPath's liquid investments are cash invested in money market accounts
or overnight repurchase agreements. Due to the short-term nature of these
investments, changes in market interest rates of up to 10 percent either up or
down would not significantly impact the Company's results of operations.
Therefore, LightPath does not believe that the market risk related to these
investments is significant.
ITEM 8. FINANCIAL STATEMENTS
See index at F-1.
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND
FINANCIAL DISCLOSURE
Not applicable.
49
LightPath Technologies, Inc. - Form 10K, June 30, 2002
PART III
ITEM 9. DIRECTORS, EXECUTIVE OFFICERS, PROMOTERS AND CONTROL PERSONS; COMPLIANCE
WITH SECTION 16(a) OF THE EXCHANGE ACT.
DIRECTORS AND EXECUTIVE OFFICERS
The Directors and Executive Officers of LightPath, and their respective
ages and positions with us, are as follows:
Name Age Position
---- --- --------
Robert Ripp (1)(3) 61 Chairman
Kenneth Brizel 44 Chief Executive Officer, President and Director
James L. Adler, Jr. (1)(2) 74 Director
Robert Bruggeworth (2)(3) 41 Director, beginning May 2001
Steve Brueck(2) 57 Director, beginning July 2001
Louis Leeburg (2)(3) 48 Director
Gary Silverman (1) (2) 63 Director
Donald E. Lawson 51 Resigned October 2001, Chief Executive Officer,
and Director
Dennis Yost 39 Senior Vice President, Optical Lens Group
Mark Fitch 39 Senior Vice President, Optical Integration Group
Donna Bogue 44 Senior Vice President, Chief Financial Officer
Robert Cullen 50 Senior Vice President, Laser Component Group and
President, Horizon Photonics, Inc.
Jean-Luc Nogues 48 Chief Technology Officer, and President, Geltech, Inc.
- ----------
(1) Member of the Compensation Committee.
(2) Member of the Audit Committee.
(3) Member of the Finance Committee.
DIRECTORS
ROBERT RIPP has served as Chairman of LightPath since November 11, 1999.
Mr. Ripp was Chairman and CEO of AMP Inc. from August 1998 until April 1999 when
AMP was sold to TYCO, International Ltd. Mr. Ripp held various executive
positions at AMP from 1994 to August 1999. Mr. Ripp spent 29 years with IBM of
Armonk, NY. He held positions in all aspects of operations within IBM
culminating in the last four years as Vice President and Treasurer and he
retired from IBM in 1993. Mr. Ripp represents LightPath as a member of the
LightChip, Inc. (an affiliate) board of directors. Mr. Ripp graduated from Iona
College in 1963 and in 1967 received his M.B.A. from New York University. Mr.
Ripp is currently on the board of directors of Ace, Ltd. which is listed on the
New York Stock Exchange.
KENNETH BRIZEL has served as a Director of LightPath, CEO and President
since July 2002. Mr. Brizel has spent 21 years in the communications and
microelectronics industries. From October 2000 until July 2002 he was Senior
Vice President Strategy and Business Development for Oplink Communications. From
April 1997 to September 2000, Mr. Brizel was Director of Strategic Marketing for
50
LightPath Technologies, Inc. - Form 10K, June 30, 2002
Optoeletronics and Network Communications Integrated Circutis groups within
Lucent Microelectronics. Mr. Brizel's diverse experiences include assignments at
RCA/GE, Lucent/Agere, Mostek and Star Semiconductor before joining Oplink. His
responsibilities spanned sales, engineering, marketing strategy and business
development. Mr. Brizel received his Bachelor of Science and Master of Science
degrees in Electrical Engineering from Rensselaer Polytechnic Institute in Troy,
NY.
JAMES L. ADLER, JR. has served as a Director of LightPath since October
1997. Since 1989 he has been a partner in the law firm of Squire, Sanders &
Dempsey L.L.P., which has acted as general counsel to LightPath since February
1996. Mr. Adler was formerly a partner of Greenbaum, Wolff & Ernst, New York
City, and of Storey & Ross, Phoenix, until the merger of the latter firm with
Squire, Sanders & Dempsey L.L.P. in 1989. Mr. Adler is a corporate, securities,
aviation and international lawyer. In 1998-1999, Mr. Adler served as President
of the Arizona Business Leadership Association. He is a member of the Arizona
District Export Council and a Trustee of the Phoenix Committee on Foreign
Relations. In March 1999, Mr. Adler was appointed by the government of Japan to
a five year term as Honorary Consul General of Japan at Phoenix. He has
previously served as Chairman of the International Law Section of the Arizona
State Bar Association and, by gubernatorial appointments, as a Member of the
Investment Committee of the Arizona State Retirement System and a Member and
Chairman of the Investment Committee of the State Compensation Fund. Mr. Adler
graduated from Carleton College, magna cum laude, and from Yale Law School in
1952. He is a member of the Arizona and New York State Bars.
DR. STEVE BRUECK has served as a Director of LightPath since July 2001. Dr.
Brueck is the Director of the Center for High Technology Materials (CHTM) and
Professor of Electrical and Computer Engineering and Professor of Physics at the
University of New Mexico in Albuquerque, New Mexico which he joined in 1985. Dr.
Brueck has led the organization to become an established, internationally
recognized center for optoelectronics and microelectronics research. He is a
1965 graduate of Columbia University with a Bachelor of Science degree in
Electrical Engineering and a graduate of Massachusetts Institute of Technology
where he received his Master of Science degree in Electrical Engineering in 1967
and Doctorate of Philosophy in Electrical Engineering in 1971. Dr. Brueck is a
fellow of both the OSA and the IEEE.
ROBERT BRUGGEWORTH has served as a Director of LightPath since May 2001.
Mr. Bruggeworth is currently President of RF Micro Devices who he joined in
1999. From 1983 until 1999 he held various positions with Amp Incorporated,
Harrisburg, PA. When he left AMP he was a Divisional Vice President, Computer
and Consumer Electronics, Hong Kong. Mr. Bruggeworth is a 1983 graduate of
Wilkes University with a Bachelor of Science in Electrical Engineering.
LOUIS LEEBURG has served as a Director of LightPath since May 1996. Mr.
Leeburg is a self-employed business consultant. From December 1988 until August
1993 he was the Vice President, Finance of The Fetzer Institute, Inc. From 1980
to 1988 he was in financial positions with different organizations with an
emphasis in investment management. Mr. Leeburg was an audit manager for Price
Waterhouse & Co. until 1980. Mr. Leeburg received a Bachelor of Science in
Accounting from Arizona State University. Mr. Leeburg is a member of Financial
Foundation Officers Group and the treasurer and trustee for the John E. Fetzer
Memorial Trust Fund and the John E. Fetzer ILM Trust Fund.
GARY SILVERMAN has served as a Director of LightPath since October 2001.
Mr. Silverman is currently the managing partner of GWS Partners, established in
1995 to conduct searches for senior-level executives and board of director
candidates for a broad cross section of publicly-held corporations. From 1983 to
1995 he worked for Korn/Ferry International as an executive recruiter and held
the position of Managing Director. He spent fourteen years with Booz, Allen &
Hamilton, and his last position was Vice President and Senior Client officer and
he was responsible for generation of new business, the management of client
assignments and the development of professional staff. Mr. Silverman is a
graduate of University of Illinois with both a Bachelors and a Masters of
Science in Finance.
DONALD E. LAWSON served as a Director of LightPath and CEO since April 1998
until October 2001. He also served as President October 1997 until October 2001.
He previously held the position of Executive Vice President from May 1995 until
April 1998, Chief Operating Officer from June 1995 until March 2001 and
Treasurer from September 1995 to July 2000. From 1991 to 1995, Mr. Lawson served
as Vice President, Operations for Lukens Medical Corporation, a medical device
51
LightPath Technologies, Inc. - Form 10K, June 30, 2002
manufacturer. From 1980 to 1990, Mr. Lawson served in various capacities,
including Production Superintendent, for Ethicon, Inc., a division of Johnson &
Johnson and a manufacturer of medical products. Mr. Lawson received a B.B.A.
degree in Finance from Texas A & M University.
EXECUTIVE OFFICERS
DENNIS YOST has been Executive Vice President, Chief Operating Officer
since March 2001 and in June 2002 his title was changed to Senior Vice President
of the newly formed Optical Lens Group. From 1997 to 2001, Mr. Yost was Managing
Director - Process Sequence Integration Group for Applied Materials Corp., a
manufacturer of semiconductor equipment. From 1989 to 1997, Mr. Yost held
various positions with Texas Instruments Corp. ending with Engineering Manager
for Digital Light Products Components Group. Mr. Yost graduated from Texas A&M
University with a Bachelor of Science and Master of Science in Electrical
Engineering. In 1995 he received his M.B.A. from Southern Methodist University.
MARK A. FITCH has been Senior Vice President since March 1999 and in June
2002 he was named Senior Vice President of the newly formed Optical Integration
Group. He joined LightPath in October 1997 as Vice President - Marketing & Sales
and has also had increasing responsibilities in the telecommunication product
development area. From 1994 to 1997, Mr. Fitch was Vice President - Operations
for Geltech Inc., a specialty optics manufacturer. From 1985 to 1994, Mr. Fitch
held various technical and commercial positions with Corning Incorporated,
ending with Chief Engineer in the optics division. Mr. Fitch graduated Summa Cum
Laude from the State University of New York with a Bachelor of Science in
Physics.
DONNA BOGUE has been Senior Vice President, Chief Financial Officer,
Secretary/Treasurer since July 2000. She previously held the position of Vice
President - Finance from November 1996 until June 2000. She joined LightPath in
April 1996. Ms. Bogue was previously Chief Financial Officer for Hebenstreit
Communications and Vice President and Controller for Diagnostek, Inc. During her
career, she served as controller for a variety of companies and was an auditor
with Ernst & Young for five years. Ms. Bogue is an honors graduate of Northern
Arizona University with a Bachelor of Science in Accountancy. She obtained her
CPA license in 1981 and is a member of the AICPA.
ROBERT CULLEN has been Chief Executive Officer, President and was a
director of Horizon since its inception in July 1997 until LightPath acquired
Horizon in April 2000. In June 2002 he was named Senior Vice President of the
newly formed Laser Component Group. Prior to co-founding Horizon, Mr. Cullen was
a laser packaging engineer with Ortel Corporation between 1993 and 1997, where
he was responsible for the design and manufacturing of several laser transmitter
models. Prior to Ortel, Mr. Cullen served as an Engineering Technologist with
the prestigious DuPont Engineering Development Laboratory (EDL) between 1982 and
1993, where he received numerous awards for various projects. In 1989, Mr.
Cullen served on a field assignment to a British Telecom-DuPont joint venture
(BT&D Technologies) in Ipswich, England, where he acted as project manager for
products such as semiconductor optical amplifiers, tunable semiconductor lasers
and 1480 pump lasers. In 1990, Mr. Cullen earned a patent for a miniature
optical isolator and co-authored a paper on high gain optical amplifiers. Mr.
Cullen pursued a Bachelors Degree in Electrical Engineering at Drexel
University, Philadelphia, Pennsylvania.
DR. JEAN-LUC NOGUES has been the President and CEO of Geltech since its
acquisition by LightPath Technologies in September 2000. He was named CTO in
June 2002. He has been involved with Geltech since its inception and had served
as COO, CTO, and Vice President of R&D. Dr. Nogues has a proven track record of
leadership in the development and commercialization of the Company's
technologies and products that led to several awards. Many of the advancements
developed by Geltech are in the fields of advanced optical components, glass
micro-optics, diffraction optics and sol-gel technology. His background also
includes the management of the University of Florida's Sol-Gel research group
that was the incubation phase of the creation of Geltech. Prior to that, Dr.
Nogues worked for six year on glass development as an Engineering Technologist
with the R & D department of the Atomic Energy Commission in France. During that
time he also consulted with several companies in the field of optics and
materials science. Over the years he has produced more than 40 publications and
holds several patents and patent applications in the field of optics and
materials science. Dr. Nogues has a Bachelor of Science in Mathematics and
52
Mechanical Engineering and he received his Master degree and PhD in Materials
Science and Engineering from the University of Montpellier, France.
SECTION 16(a) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE
Section 16(a) of the Securities Exchange Act of 1934 requires our officers
and directors, and persons who own more than 10% of a registered class of our
equity securities, to file reports of ownership and changes in ownership with
the Securities and Exchange Commission ("SEC"). Officers, directors and greater
than 10% stockholders are required by SEC regulation to furnish us with copies
of all Section 16(a) forms they file. Based solely upon a review of the copies
of such forms furnished to us, or written representations that no Forms 5 were
required, we believe that during the year ended June 30, 2002, all Section 16(a)
filing requirements applicable to its officers, directors and greater than 10%
beneficial owners were complied with.
ITEM 10. EXECUTIVE COMPENSATION.
The information required under this item will be set forth in our proxy
statement to be filed with the Securities and Exchange Commission and is
incorporated herein by reference.
ITEM 11. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT.
The information required under this item will be set forth in our proxy
statement to be filed with the Securities and Exchange Commission and is
incorporated herein by reference.
ITEM 12. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS.
The information required under this item will be set forth in our proxy
statement to be filed with the Securities and Exchange Commission and is
incorporated herein by reference.
53
LightPath Technologies, Inc. - Form 10K, June 30, 2002
ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K.
(a) Financial Statements - Index page F-1
Independent Auditors' Report on Consolidated Financial Statements
Consolidated Balance Sheets
Consolidated Statements of Operations
Consolidated Statements of Stockholders' Equity
Consolidated Statements of Cash Flows
(b) Exhibits
Exhibit
Number Description
------ -----------
3.1 Certificate of Incorporation of Registrant, as amended 1
3.2 Certificate of Designations filed November 10, 1995 with
the Secretary of State of the State of Delaware 1
3.3 Bylaws of Registrant 1
3.4 Certificate of Designation filed November 2, 1999 with
the Secretary of State of the State of Delaware 2
9.1 Rights Agreement dated May 1, 1998 3
10.4 Directors Compensation Agreement with Amendment for Robert
Ripp 6
10.6 Omnibus Incentive Plan 4
10.7 Directors Stock Option Plan 5
10.8 Amended Omnibus Incentive Plan 6
10.9 Merger Agreement dated April 14, 2000 between Registrant
and Horizon Photonics, Inc. 7
10.10 Merger Agreement dated August 9, 2000 between Registrant
and Geltech, Inc. 8
23.1 Consent of KPMG LLP *
99.1 Certification *
1. This exhibit was filed as an exhibit to Our Registration Statement on Form
SB-2 (File No: 33-80119) and is incorporated herein by reference thereto.
2. This exhibit was filed as an exhibit to Our Registration Statement on Form
S-3 (File No: 333-94303) dated January 10, 2000 and is incorporated herein
by reference thereto.
3. This exhibit was filed as an exhibit to Our Registration Statement on Form
8-A (File No: 000-27548) dated April 28, 1998 and is incorporated herein by
reference thereto.
4. This exhibit was filed as an exhibit to Our Registration Statement on Form
S-8 (File No: 333-23515 and 333-23511, respectively) dated March 18, 1997
and is incorporated herein by reference thereto.
5. This exhibit was filed as an exhibit to Our Registration Statement on Form
S-8 (File No: 333-50976) dated November 30, 2000 and is incorporated herein
by reference thereto.
6. This exhibit was filed as an exhibit to Our Registration Statement on Form
S-3 (File No: 333-37622) dated June 12, 2000 and is incorporated herein by
reference thereto.
54
LightPath Technologies, Inc. - Form 10K, June 30, 2002
7. This exhibit was filed as an exhibit to Our Registration Statement on Form
S-3 (File No: 333-47992) dated October 20, 2000 and is incorporated herein
by reference thereto.
* Filed herewith.
d) The following reports on Form 8-K were filed under the Securities Exchange
Act of 1934 during the quarter ended June 30, 2002:
1. Current report on Form 8-K dated April 3, 2002, announced the fiscal
2002, third quarter conference call would be held on April 25, 2002.
2. Current report on Form 8-K dated April 25, 2002, included the third
quarter of fiscal 2002 financial results.
55
LIGHTPATH TECHNOLOGIES, INC.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Report of KPMG LLP, Independent Auditors ....................................F-2
Consolidated Financial Statements
Consolidated Balance Sheets..................................................F-3
Consolidated Statements of Operations........................................F-4
Consolidated Statements of Stockholders' Equity..............................F-5
Consolidated Statements of Cash Flows........................................F-6
Notes to Consolidated Financial Statements...................................F-7
F-1
REPORT OF KPMG LLP, INDEPENDENT AUDITORS
The Board of Directors
LightPath Technologies, Inc.:
We have audited the accompanying consolidated balance sheets of LightPath
Technologies, Inc., and subsidiaries as of June 30, 2002 and 2001, and the
related consolidated statements of operations, stockholders' equity, and cash
flows for each of the years in the three year period ended June 30, 2002. These
consolidated financial statements are the responsibility of the Company's
management. Our responsibility is to express an opinion on these consolidated
financial statements based on our audits.
We conducted our audits in accordance with auditing standards generally accepted
in the United States of America. Those standards require that we plan and
perform the audit to obtain reasonable assurance about whether the financial
statements are free of material misstatement. An audit includes examining, on a
test basis, evidence supporting the amounts and disclosures in the financial
statements. An audit also includes assessing the accounting principles used and
significant estimates made by management, as well as evaluating the overall
financial statement presentation. We believe that our audits provide a
reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present
fairly, in all material respects, the financial position of LightPath
Technologies, Inc., and subsidiaries as of June 30, 2002 and 2001, and the
results of their operations and their cash flows for each of the years in the
three year period ended June 30, 2002 in conformity with accounting principles
generally accepted in the United States of America.
KPMG LLP
Albuquerque, New Mexico
August 2, 2002
F-2
LIGHTPATH TECHNOLOGIES, INC.
CONSOLIDATED BALANCE SHEETS
JUNE 30, JUNE 30,
2002 2001
------------- -------------
ASSETS
Current assets:
Cash and cash equivalents $ 13,177,624 $ 29,273,034
Trade accounts receivable - less allowance of $278,255 and $120,947 1,560,198 2,579,483
Inventories (NOTE 2) 2,403,644 5,414,587
Other receivables and advances to employees 761,065 442,116
Prepaid expenses and other 770,302 616,071
------------- -------------
Total current assets 18,672,833 38,325,291
Property and equipment - net (NOTE 3) 6,664,374 12,046,891
Goodwill and intangible assets - net (NOTE 4) 8,054,179 25,683,341
Investment in LightChip, Inc. and other assets (NOTE 6) 3,585,842 8,234,885
------------- -------------
Total assets $ 36,977,228 $ 84,290,408
============= =============
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
Accounts payable $ 1,002,374 $ 1,276,204
Accrued liabilities (NOTE 15) 1,835,040 300,263
Accrued payroll and benefits 549,241 1,131,252
Accrued severance and exit costs (NOTE 7) 1,059,680 --
Capital lease obligations and note payable (NOTE 8) 88,550 242,475
------------- -------------
Total current liabilities 4,534,885 2,950,194
Deferred income taxes (NOTE 11) -- 3,316,304
Commitments and contingencies (NOTE 15)
Redeemable convertible preferred stock (NOTE 9)
$.01 par value; stated value of $10,000 per share; 5,000,000 shares
authorized; none and 127 Series F shares issued and outstanding -- 1,417,070
Stockholders' equity: (NOTES 10 AND 12)
Common stock: Class A, $.01 par value, voting; 34,500,000 shares
authorized; 20,677,071 and 19,371,167 shares issued and outstanding 206,771 193,712
Additional paid-in capital 188,276,439 181,708,752
Accumulated deficit (156,040,867) (105,295,624)
------------- -------------
Total stockholders' equity 32,442,343 76,606,840
------------- -------------
Total liabilities and stockholders' equity $ 36,977,228 $ 84,290,408
============= =============
See accompanying notes.
F-3
LIGHTPATH TECHNOLOGIES, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
YEAR ENDED JUNE 30
--------------------------------------------
2002 2001 2000
------------ ------------ ------------
REVENUES
Telecom product and lens sales $ 11,990,609 $ 25,257,391 $ 2,098,841
Product development fees and other sales 515,973 885,765 167,423
------------ ------------ ------------
Total revenues 12,506,582 26,143,156 2,266,264
COSTS AND EXPENSES
Cost of sales (exclusive of stock-based compensation
of $27,824, $11,875 and none, for the years ended
June 30, 2002, 2001 and 2000, respectively) 15,156,619 15,283,694 1,309,711
Selling, general and administrative (exclusive of
stock-based compensation of $ 4,768,130,
$11,127,536 and $3,144,490, for the years ended
June 30, 2002, 2001 and 2000, respectively) 11,568,531 19,291,630 5,942,029
Research and development (exclusive of stock-based
compensation of $13,766, $25,094 and none, for
the years ended June 30, 2002, 2001 and 2000,
respectively) 7,095,649 7,089,931 1,449,347
Asset impairment (NOTES 3 AND 4) 16,508,387 13,772,867 --
Stock-based compensation 4,809,720 11,164,505 3,144,980
Amortization of goodwill and intangibles 7,889,741 13,566,807 2,418,119
Employee severance and exit costs (NOTE 7) 1,059,680 -- --
Acquired in process research and development -- 9,100,000 4,200,000
------------ ------------ ------------
Total costs and expenses 64,088,327 89,269,434 18,464,186
------------ ------------ ------------
Operating loss (51,581,745) (63,126,278) (16,197,922)
OTHER INCOME (EXPENSE)
Investment income 1,102,259 2,436,438 1,062,952
Interest and other expense (203,851) (73,521) (475,097)
------------ ------------ ------------
Net loss $(50,683,337) $(60,763,361) $(15,610,067)
Imputed dividend and premium on preferred stock (61,906) (89,549) (2,231,943)
------------ ------------ ------------
Net loss applicable to common shareholders (NOTE 13) $(50,745,243) $(60,852,910) $(17,842,010)
============ ============ ============
Basic and diluted net loss per share $ (2.56) $ (3.19) $ (1.86)
============ ============ ============
Number of shares used in per share calculation 19,807,383 19,064,141 9,586,817
============ ============ ============
See accompanying notes.
F-4
LIGHTPATH TECHNOLOGIES, INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
CLASS A
COMMON STOCK
----------------------------- ADDITIONAL
NUMBER OF PAID-IN ACCUMULATED
SHARES AMOUNT CAPITAL DEFICIT TOTAL
------------- ------------- ------------- ------------- -------------
Balances at June 30, 1999 4,960,703 $ 49,607 $ 26,860,418 $ (26,600,704) $ 309,321
Issuance of common stock 66,429 664 258,136 -- 258,800
Exercise of stock options and unit purchase
options 682,521 6,825 3,214,108 -- 3,220,933
Exercise of warrants
Debt 577,350 5,774 1,264,396 -- 1,270,170
Equity 8,764,665 87,647 60,930,062 -- 61,017,709
Issuance of common stock upon conversion of 37
shares Series A, 1 share Series B, 84 shares
Series C and 255 shares Series F convertible
preferred stock 1,066,970 10,670 3,923,831 -- 3,934,501
Issuance of common stock upon conversion of
6% convertible debentures 569,801 5,698 1,313,423 -- 1,319,121
Issuance of common stock and stock options
to acquire Horizon Photonics, Inc. 1,447,815 14,478 37,954,135 -- 37,968,613
Stock-based compensation -- -- 3,144,980 -- 3,144,980
Imputed dividend on Series F convertible
preferred stock -- -- 2,094,662 (2,094,662) --
Premium on Series A , Series B, Series C and
Series F convertible preferred stock -- -- -- (137,281) (137,281)
Net loss -- -- -- (15,610,067) (15,610,067)
------------- ------------- ------------- ------------- -------------
Balances at June 30, 2000 18,136,254 $ 181,363 $ 140,958,151 $ (44,442,714) $ 96,696,800
Exercise of stock options 306,255 3,063 1,501,562 -- 1,504,625
Exercise of warrants and unit purchase
options 50,217 502 65,487 -- 65,989
Issuance of common stock upon conversion of
26 shares Series F convertible preferred
stock 55,704 557 273,620 -- 274,177
Issuance of common stock and stock options
to acquire Geltech, Inc. 822,737 8,227 27,705,609 -- 27,713,836
Redemption E1, E2, E3 common stock -- -- 39,818 -- 39,818
Stock-based compensation -- -- 11,164,505 -- 11,164,505
Premium on Series F convertible preferred stock -- -- -- (89,549) (89,549)
Net loss -- -- -- (60,763,361) (60,763,361)
------------- ------------- ------------- ------------- -------------
Balances at June 30, 2001 19,371,167 $ 193,712 $ 181,708,752 $(105,295,624) $ 76,606,840
Exercise of stock options 107,500 1,075 290,975 -- 292,050
Issuance of common stock upon conversion of 127
shares Series F convertible preferred stock 1,198,404 11,984 1,466,992 -- 1,478,976
Stock-based compensation -- -- 4,809,720 -- 4,809,720
Premium on Series F convertible preferred stock -- -- -- (61,906) (61,906)
Net loss -- -- -- (50,683,337) (50,683,337)
------------- ------------- ------------- ------------- -------------
Balances at June 30, 2002 20,677,071 $ 206,771 $ 188,276,439 $(156,040,867) $ 32,442,343
============= ============= ============= ============= =============
See accompanying notes.
F-5
LIGHTPATH TECHNOLOGIES, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
YEAR ENDED JUNE 30
--------------------------------------------
2002 2001 2000
------------ ------------ ------------
CASH FLOWS FROM OPERATING ACTIVITIES
Net loss $(50,683,337) $(60,763,361) $(15,610,067)
Adjustments to reconcile net loss to net cash
used in operating activities:
Depreciation and amortization 10,922,531 16,261,789 3,090,322
Gain on sale of equipment (117,665) -- --
Provision for uncollectible accounts receivable 199,238 105,947 --
Debt discount -- -- 425,795
Write off abandoned patents 79,333 -- 132,011
Asset impairments 16,508,387 13,772,867 --
Stock-based compensation 4,809,720 11,164,505 3,144,980
Acquired in-process research and development -- 9,100,000 4,200,000
Changes in operating assets and liabilities (net of
the effect of acquisitions):
Trade receivables 820,047 (1,051,825) 639,450
Inventories 2,897,943 (2,656,444) (531,698)
Prepaid expenses and other (28,346) (317,053) (197,858)
Accounts payable and accrued liabilities,
including payroll 678,936 (588,408) 1,451,545
Accrued severance and exit costs 1,059,680 -- --
------------ ------------ ------------
Net cash used in operating activities (12,853,533) (14,971,983) (3,255,520)
CASH FLOWS FROM INVESTING ACTIVITIES
Property and equipment additions, net (2,757,528) (7,230,694) (5,148,438)
Costs incurred in acquiring patents and license agreements (60,171) (84,630) (58,324)
Proceeds from sale of assets 904,841 -- --
Proceeds from note receivable 33,201 -- --
Acquisitions, net of cash acquired -- (18,411) (2,164,662)
Investment in LightChip (1,500,345) (7,234,885) (1,570,000)
------------ ------------ ------------
Net cash used in investing activities (3,380,002) (14,568,620) (8,941,424)
CASH FLOWS FROM FINANCING ACTIVITIES
Proceeds from issuance of 6% convertible
debentures, net of discount and offering costs -- -- 893,326
Payment on notes payable and capital leases (153,925) (1,484,704) (30,000)
Proceeds from sales of Convertible Series F
preferred stock, net -- -- 3,880,324
Proceeds from exercise of common stock options
and warrants, net 292,050 1,570,211 65,509,236
Proceeds from issuance of common stock -- -- 258,800
------------ ------------ ------------
Net cash provided by financing activities 138,125 85,507 70,511,686
------------ ------------ ------------
Net (decrease) increase in cash and cash
equivalents (16,095,410) (29,455,096) 58,314,742
Cash and cash equivalents at beginning of period 29,273,034 58,728,130 413,388
------------ ------------ ------------
Cash and cash equivalents at end of period $ 13,177,624 $ 29,273,034 $ 58,728,130
============ ============ ============
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION:
Interest paid $ 9,210 $ 72,811 $ 1,180
Non-cash investing and financing activities:
Class A common stock, warrant and stock options
issued for acquisitions $ -- $ 27,713,836 $ 37,968,613
Class A common stock issued upon conversion of
preferred stock $ 11,984 $ 557 $ 10,670
Note receivable in exchange for equipment $ 510,000 $ -- $ --
Conversion of redeemable convertible preferred stock
to Class A common stock $ 1,478,976 $ 274,177 $ 3,934,501
Preferred stock premium $ (61,906) $ (89,549) $ (137,281)
Class E common stock - redeemed in 2001 and
issued in 2000 $ -- $ 40,221 $ 421
See accompanying notes.
F-6
LIGHTPATH TECHNOLOGIES, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
JUNE 30, 2002 AND 2001
ORGANIZATION AND LIQUIDITY
LightPath Technologies, Inc. ("LightPath" or the "Company") was incorporated in
Delaware on June 15, 1992 as the successor to LightPath Technologies Limited
Partnership formed in 1989, and its predecessor, Integrated Solar Technologies
Corporation formed in 1985. On April 14, 2000, the Company acquired Horizon
Photonics, Inc. ("Horizon"). On September 20, 2000, the Company acquired
Geltech, Inc. ("Geltech"). The Company is engaged in the production of
collimator, isolator, and precision molded aspheric optics used in the telecom
components market, GRADIUM(R) glass lenses and other optical materials. The
Company also performs research and development for optical solutions for the
fiber telecommunications and traditional optics markets. As used herein, the
terms ("LightPath" or the "Company"), refer to LightPath individually or, as the
context requires, collectively with its subsidiaries on a consolidated basis.
The Company has incurred substantial losses since inception. During fiscal year
1996, the Company completed an initial public offering ("IPO") and in fiscal
years 1997, 1998 and 2000 the Company completed four private placements of
convertible preferred stock and one private placement for convertible debentures
to raise additional capital. These funds were used to further research,
development and commercialization of optoelectronic products and GRADIUM glass
lenses. During fiscal year 2000, warrants issued at the IPO and private
placement warrants were exercised for approximately $65.5 million.
The optical components markets have experienced a severe downturn throughout
fiscal 2002, resulting in a significant decline in the demand for our products
as well as our competitors. Cash used in operations for fiscal 2002 was
approximately $12.9 million, a decrease of approximately $2.1 million from
fiscal 2001. Throughout fiscal 2002 the Company reduced its cash expenditures
through improved manufacturing efficiencies, suspension of selected development
projects and consolidation of equipment and facilities. During the fourth
quarter of fiscal 2002, the Company announced plans to consolidate lens product
lines in Florida, close the New Mexico facilities and reorganize internally
which will further decrease our cash requirements for fiscal 2003. While the
Company has no firm commitments for any future financing at this time, with a
cash balance of approximately $13.2 million at June 30, 2002, the Company will
take the necessary actions to manage through this downturn. The Company believes
that its financial resources will be sufficient to finance the Company's
operations and capital expenditures, excluding acquisitions, for the next twelve
months.
1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
CONSOLIDATED FINANCIAL STATEMENTS include the accounts of the Company and its
wholly-owned subsidiaries. All significant intercompany transactions have been
eliminated in consolidation.
CASH AND CASH EQUIVALENTS consist of cash in the bank and temporary investments
with original maturities of ninety days or less when purchased.
INVENTORIES which consists principally of raw materials, lenses, isolators,
collimators and components are stated at the lower of cost or market, on a
first-in, first-out basis. Inventory costs include materials, labor and
manufacturing overhead.
PROPERTY AND EQUIPMENT are stated at cost and depreciated using both
straight-line and accelerated methods over the estimated useful lives of the
related assets ranging from three to seven years. Platinum molds less estimated
salvage value are depreciated on a straight-line basis over the estimated useful
lives ranging from one to two years.
INTANGIBLE ASSETS consisting of goodwill, customer list and supply contracts,
licenses, patents, trademarks and others are recorded at cost. Upon issuance of
the license, patent or trademark, these assets are being amortized on the
straight-line basis over the estimated useful lives of the related assets
ranging from ten to seventeen years. Goodwill, customer list and supply
contracts and other intangibles are being amortized on a straight-line basis
F-7
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
over the estimated period of benefit ranging from two to five years. The
recoverability of the carrying values of these intangible assets are evaluated
on a recurring basis. Long-lived assets are reviewed for impairment whenever
events or changes in circumstances indicate that the carrying amount of the
assets may not be recoverable. When an evaluation is required, the estimated
future undiscounted cash flows associated with the asset are compared to the
asset's carrying amount to determine if a write-down to fair value is required.
See Notes 3 and 4.
INVESTMENTS consists of the Company's ownership interest in LightChip Inc.
(LightChip) which is accounted for under the cost method.
INCOME TAXES are accounted for under the asset and liability method. Deferred
income tax assets and liabilities are computed for differences between the
financial statement and tax bases of assets and liabilities that will result in
taxable or deductible amounts in the future based upon enacted tax laws and
rates applicable to the periods in which the differences are expected to affect
taxable income. Valuation allowances are established when necessary to reduce
deferred tax assets to the amount expected to be realized.
REVENUE is generally recognized from product sales when products are shipped to
the customer provided that LightPath has received a valid purchase order, the
price is fixed, title has transferred, collection of the associated receivable
is reasonably assured, and there are no remaining significant obligations.
Revenues from product development agreements are recognized as milestones are
completed in accordance with the terms of the agreements. Provisions for
estimated losses are made in the period in which such losses are determined.
Sales to Finisar, Corp. were approximately $3 million which represents 24% of
all revenues for the year ended June 30, 2002. Sales to the Agere Systems, Inc
(formerly Microelectronics division of Lucent Technologies Inc.) were
approximately $11.5 million which represents 44% of all revenues for the year
ended June 30, 2001. Sales to Lucent Technologies, Inc., for the year ended June
30, 2000 were approximately $930,000 or 41% of total revenues.
RESEARCH AND DEVELOPMENT costs are expensed as incurred.
STOCK-BASED COMPENSATION is accounted for using the intrinsic value method as
prescribed by APB Opinion No. 25, ACCOUNTING FOR STOCK ISSUED TO EMPLOYEES,
under which no compensation expense is recognized when the exercise price of the
employees stock option equals or exceeds the market price of the underlying
stock on the date of grant and other requirements are met. For options issued to
non-employees, stock-based compensation is accounted for using the fair value
method as prescribed by Statement of Financial Accounting Standards No. 123,
Accounting for Stock-Based Compensation (SFAS 123) and EITF Issue 96-18.
Pro forma information required by SFAS 123 has been presented as if the fair
value method using a Black-Scholes option pricing model had been applied.
MANAGEMENT MAKES ESTIMATES and assumptions during the preparation of the
Company's consolidated financial statements that affect amounts reported in the
financial statements and accompanying notes. Such estimates and assumptions
could change in the future as more information becomes known, which in turn
could impact the amounts reported and disclosed herein.
FAIR VALUES OF FINANCIAL INSTRUMENTS of the Company are disclosed as required by
Statement of Financial Accounting Standards No. 107, Disclosures about Fair
Values of Financial Instruments. The carrying amounts of cash and cash
equivalents, trade accounts receivable, accounts payable and accrued liabilities
approximate fair value.
RECLASSIFICATION of certain amounts included in the prior year financial
statements have been made to conform to the current year presentation.
RECENT ACCOUNTING PRONOUNCEMENTS not yet adopted include Statement No. 142,
Goodwill and Other Intangible Assets, which the Company will adopt on July 1,
2002. Statement 142 will require that goodwill and intangible assets with
indefinite useful lives no longer be amortized, but instead be tested for
impairment at least annually in accordance with the provisions of Statement 142.
The Company has unamortized goodwill of approximately $2.3 million remaining at
July 1, 2002, which will be subject to the transition provisions of Statement
F-8
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
142. Amortization expense related to goodwill was $1.3 million, $2.95 million
and $2.95 million for the years ended June 30, 2002, 2001 and 2000,
respectively. Following adoption of Statement 142, amortization expense,
estimated at approximately $1.3 million for the year ended June 30, 2003, will
no longer be recorded.
2. INVENTORIES
The components of inventories include the following at June 30:
2002 2001
---------- ----------
Raw materials $1,670,488 $3,208,838
Work in process 380,987 971,916
Finished goods 352,169 1,233,832
---------- ----------
Total inventories $2,403,644 $5,414,587
========== ==========
Throughout fiscal 2002, the Company noted several factors that caused the
re-evaluation of the carrying value of inventory resulting in charges to write
down inventory to net realizable value, or to write off inventory to be disposed
of given no alternative future use was identified. Total inventory charges of
$1.9 million and $1.1 million were recorded during fiscal 2002 related to
finished goods/work in process and raw materials inventory, respectively.
Specifically, during the first and second quarters, inventory charges of $1.3
million were recorded as the Company continued to note declining quarterly sales
from previous levels, lack of growth in sales orders and no sales in certain
product areas where the Company had purchased raw materials. The Company also
received notification that certain lenses and raw materials did not pass
qualification requirements for their particular applications during the second
quarter. During the fourth quarter, the manufacturing group changed the
production methodology for performance improvements rendering some products
obsolete that resulted in charges of $0.5 million. During the fourth quarter,
the Company also noted that the value of certain finished lens and raw materials
inventory had diminished due to changes in market conditions as some competitors
reduced prices for similar products to a level below the Company's cost
resulting in inventory write downs of $0.4 million. Finally, the Company noted
uncertainty regarding the realization of certain finished products on hand due
to cancelled purchase orders which resulted in write downs of $0.8 million
during the fourth quarter.
3. PROPERTY AND EQUIPMENT
Property and equipment consist of the following at June 30:
2002 2001
----------- -----------
Manufacturing equipment $ 8,030,935 $13,755,183
Computer equipment and software 598,643 1,182,772
Furniture and fixtures 215,836 604,567
Platinum molds 63,895 656,073
Leasehold improvements 1,157,887 1,667,582
----------- -----------
10,067,196 17,866,177
Less accumulated depreciation 3,402,822 5,819,286
----------- -----------
Total property and equipment $ 6,664,374 $12,046,891
=========== ===========
During the second quarter of fiscal 2002, the Company recorded impairment
charges to write off certain excess manufacturing equipment with a carrying
value of approximately $0.6 million which was used in the production of
collimators and was removed from service by the Company due to changes in the
manufacturing process. The net carrying value of equipment held for disposal was
approximately $280,000 at June 30, 2002.
F-9
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
During the fourth quarter of fiscal 2001, the Company recorded an impairment
charge of approximately $408,000 related to equipment held for disposal,
expected to be completed during the first quarter of fiscal 2002. The net
carrying value of the equipment held for disposal was approximately $90,000 at
June 30, 2001. The equipment was used for the production of traditional optics
in California, which the Company was consolidated into our Florida facility. The
equipment was sold to a third party in September 2001 in exchange for $270,000
cash and a note receivable for $270,000 payable over a period of 5 years and a
gain of approximately $390,000 was recorded. In addition, during the fourth
quarter, certain manufacturing equipment and inventory with a net carrying value
of $272,000 were sold to a third party for $32,000 and a note receivable of
$240,000 (payable in fiscal 2003) in connection with a licensing agreement and
no gain or loss was recognized.
4. INTANGIBLE ASSETS
Intangible assets consist of the following at June 30:
Life
In years 2002 2001
-------- ----------- -----------
Goodwill 4 $ 5,203,365 $ 5,203,365
Customer list and supply contract 4 1,041,750 4,800,000
Developed technology 2 - 4 6,064,981 18,000,000
Covenant not-to-compete 3 3,100,000 3,100,000
Other intangibles 2 - 5 2,860,000 2,860,000
Patents and trademarks granted 10 - 17 643,388 582,787
License agreements -- 46,560
Patent applications in process 74,757 127,800
----------- -----------
18,988,241 34,720,512
Less accumulated amortization 10,934,062 9,037,171
----------- -----------
Total intangible assets $ 8,054,179 $25,683,341
=========== ===========
The Company's Geltech subsidary experienced sales growth during the first
quarter of fiscal 2002, however, design changes by a major customer in October
2001 as well as the continued decline in the telecommications industry led to a
significant decline in future sales projections and growth potential. The
Company determined that the estimated future undiscounted cash flows remaining
from the developed technology and customer list recorded in connection with the
purchase of Geltech were below the carrying value of the related intangible
assets. Accordingly, during the second quarter of fiscal year 2002 the Company
recorded an impairment charge of approximately $4.9 million to write down the
carrying value of these intangibles to their estimated fair value of
approximately $4.7 million. The estimated fair values of the intangible assets
were based on the anticipated discounted future cash flows from revised sales
forecasts. In addition, the Company reversed the net deferred tax liability of
approximately $3.3 million established in connection with the non-taxable
purchase of Geltech against the related intangible assets prior to the
impairment charge as the carrying value of the remaining Geltech intangible
assets was reduced in connection with the impairment.
During fiscal 2001, revenues from the sale of Horizon's products were
substantial for the first nine months of fiscal 2001, however, Horizon had to
defer sales under a supply contract to a significant customer beginning in May
2001. The Company determined that the aggregate estimated future undiscounted
cash flows related to the customer supply contract and associated goodwill
recorded in connection with the acquisition of Horizon were less then the
carrying value of the related intangible assets and the intangibles were written
down to their estimated fair value which resulted in an impairment charge of
approximately $13.4 million being recorded in the fourth quarter of fiscal year
2001. In November 2001, the customer indicated they will not take delivery of
any remaining orders which resulted in the impairment of the remaining carrying
value of the customer supply contract of approximately $1.5 million during the
second quarter of fiscal year 2002.
F-10
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
5. ACQUISITIONS
The Company did not complete any acquisitions during the year ended June 30,
2002. The Company completed the acquition described below during the fiscal year
ended June 30, 2001.
On September 20, 2000, the Company acquired all of the outstanding shares of
Geltech, for an aggregate purchase price of approximately $28.5 million,
comprised of 822,737 shares of Class A common stock (valued at $27.5 million)
and approximately $1 million in acquisition costs. The number of shares of Class
A common stock issued to the former shareholders of Geltech was based on the
average closing price of the Class A common stock for five days prior to the
date of the purchase agreement, August 9, 2000. Geltech, a Delaware corporation,
is a manufacturer of precision molded aspheric optics used in the active telecom
components market to provide a highly efficient means to couple laser diodes to
fibers or waveguides. The acquisition has been accounted for using the purchase
method of accounting and, accordingly, the results of operations of Geltech have
been included in the Company's consolidated financial statements from September
20, 2000.
In the first quarter of fiscal 2001, the Company recorded a non-recurring charge
of $9.1 million, due to acquired in-process research and development based on an
assessment of the purchased technology of Geltech. This charge represents
technology that did not meet the accounting definitions of "completed
technology," and thus should be charged to earnings under generally accepted
accounting principles. This assessment analyzed certain diffraction gratings,
waveguides, lens arrays and sub-assembly technologies that were under
development at the time of acquisition. These programs were in various stages of
completion ranging from 30% to 50% of completion, with estimated completion
dates through December 2001. This in-process research will have no alternative
future uses if the products are not feasible. Revenues from in-process products
were orginally estimated primarily beginning in fiscal 2002, with projected
research and development costs-to-complete of approximately $2.25 million. The
estimated fair value of these development programs was determined in accordance
with views expressed by the staff of the Securities and Exchange Commission.
During the year ended June 30, 2002, there were no significant sales generated
from these programs and we concluded research efforts on two of these programs.
6. INVESTMENT IN LIGHTCHIP, INC.
On May 21, 2002, LightChip issued additional shares of voting convertible
preferred stock to certain existing shareholders of which the Company purchased
its pro-rata interest of approximately $1.5 million. The Company's combined
common stock and preferred stock voting interest in LightChip decreased to
approximately 13% following the completion of the round. This equity round was
at a price per share that was less than the carrying value of LightPath's
existing investment in LightChip creating an other than temporary decline in the
fair value of our investment that resulted in a write down of approximately $6.3
million during the quarter ending June 30, 2002.
On August 21, 2000, LightChip issued additional shares of voting convertible
preferred stock for $60 million, of which the Company funded $7.2 million, its
pro-rata interest. On December 8, 1999, LightChip issued additional shares of
voting convertible preferred stock for $16 million, of which the Company funded
$1 million and the Company's combined common stock and preferred stock voting
interest in LightChip decreased to approximately 18% following the investment.
Accordingly, the Company began accounting for its investment in LightChip under
the cost method in December 1999. In accordance with the SEC staff position
stated in EITF Topic D-84, the Company's pro-rata share of LightChip losses
through December 8, 1999, totaling $514,288 were not recognized as a result of
the Company's additional investment.
7. RESTRUCTURING
On June 27, 2002, the Company announced a restructuring plan to consolidate its
corporate headquarters and manufacturing facilities in Albuquerque, New Mexico
to Orlando, Florida by September 30, 2002. A restructuring accrual for employee
severance and other exit costs was recorded at June 30, 2002 for approximately
F-11
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
$1.1 million, which includes employee severance for 67 employees and other lease
costs. As of June 30, 2002, none of the restructuring costs accrued were paid.
The severance benefits will be paid prior to December 31, 2002 and the lease
payments will be substantially complete by June 30, 2003. In addition, in the
fourth quarter the Company recorded asset impairment charges of $3.2 million to
write down the carrying value to estimated fair value less costs to sell of
certain manufacturing and other equipment, and leasehold improvements held for
disposal in connection with the Company's plan to relocate manufacturing
operations and corporate headquarters to Florida during fiscal 2003.
8. CAPITAL LEASES AND NOTE PAYABLE
The Company has capital lease obligations of approximately $10,000, payable in
monthly installments including interest at 11.7%, which expire in September
2002. These obligations are generally secured by the equipment purchased under
the agreement. Geltech is currently in negotiations with Corning Inc. related to
their licensing agreement and has not repaid a balance of approximately $78,000
on the note payable to Corning Inc. that was originally due in July 1999. The
Company does not accrue interest on the note (prime rate plus .5%) and the
unpaid amount is included in the capital lease obligations and note payable at
June 30, 2002. The Company incurred interest expense of $9,210, $77,904, and
$1,180 in years ended June 30, 2002, 2001, and 2000, respectively.
A line of credit for $500,000 expired in June 2002.
9. REDEEMABLE CONVERTIBLE PREFERRED STOCK
Authorized 5,000,000 shares of preferred stock. From June 1997 to January 1998,
the Board of Directors designated 950 shares as Series A, Series B and Series C
Convertible Preferred Stock; $.01 par value. The Company entered into private
placement transactions which provided proceeds on the sale of 785 shares of
Series A, Series B and Series C Preferred Stock totaling $7,850,000, less
issuance costs of approximately $660,000, resulting in net proceeds of
approximately $7,190,000 by their respective final closing dates. As of June 30,
2001, all Series A, Series B and Series C shares were converted to common stock.
In October 1999, the Board of Directors designated 500 shares as Series F
Convertible Preferred Stock; $.01 par value. The Company entered into a private
placement transaction which provided proceeds on the sale of 408 shares of
Series F Preferred Stock totaling $4,080,000, less issuance costs of
approximately $180,000 resulting in net proceeds of approximately $3,900,000 by
the final closing date, November 2, 1999. During the third quarter of fiscal
2002, the 127 outstanding shares of Series F Convertible Preferred Stock
outstanding were converted into 1,198,404 shares of Class A common stock.
Designations, rights, and preferences related to the remaining preferred shares
may be determined by the Board of Directors. The terms of any series of
preferred stock may include priority claims to assets and dividends and voting
or other rights.
The Series A, Series B, Series C and Series F Convertible Preferred Stock
(collectively "Convertible Preferred Stock") had a stated value and liquidation
preference of $10,000 per share, plus an 8% per annum premium (7% Series F). The
holders of the Convertible Preferred Stock are not entitled to vote or to
receive dividends. Each share of Convertible Preferred Stock was convertible
into Class A common stock at the option of the holder based on its stated value
at the conversion date divided by a conversion price. The conversion price is
defined as the lesser of $5.625, $7.2375, $6.675 and $5.00 for the Series A,
Series B, Series C and Series F Convertible Preferred Stock, respectively, or
85% (80% Series F) of the average closing bid price of the Company's Class A
common stock for the five days preceding the conversion date. The beneficial
conversion feature in each of the Series A, Series B and Series C Preferred
Stock was recognized as an imputed dividend prior to June 30, 1998. The
beneficial conversion feature in the Series F Preferred Stock was recognized as
an imputed dividend for the year ended June 30, 2000, in the amount of
$2,094,662, increasing net loss applicable to common shareholders from the date
of issuance to the first date that conversion can occur.
F-12
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
Based on the SEC staff guidance addressed in EITF Topic D-98, which indicates
that the possibility that any triggering event that is not solely within the
control of the issuer could occur - without regard to probability - requires the
security to be classified outside of permanent equity, the Company classified
the Series F preferred stock outside of stockholders' equity, for all periods
presented.
Preferred stock activity during the fiscal periods ended June 30, 2002, 2001 and
2000 were as follows:
CONVERTIBLE PREFERRED STOCK
-----------------------------
SERIES A,
SERIES B &
SHARES OUTSTANDING AT: SERIES C SERIES F TOTAL
-------- -------- -----
June 30, 1999 122 -- 122
---- ---- ----
Issuance of Series F preferred stock -- 408 408
Conversions to common stock (122) (255) (377)
---- ---- ----
June 30, 2000 -- 153 153
---- ---- ----
Conversions to common stock -- (26) (26)
June 30, 2001 -- 127 127
Conversions to common stock -- (127) (127)
---- ---- ----
June 30, 2002 -- -- --
==== ==== ====
10. STOCKHOLDERS' EQUITY
The Company completed an IPO on February 22, 1996 for the sale of 1,840,000
units at an initial public offering price of $5.00. Each unit consisted of one
share of Class A common stock, one Class A warrant and one Class B warrant.
Common Stock - The Company's common stock consists of the following:
Authorized 34,500,000 shares of Class A common stock, $.01 par value. The
stockholders of Class A common stock are entitled to one vote for each share
held.
The Company's authorized common stock includes, 2,000,000 shares of Class E-1
common stock, 2,000,000 shares of Class E-2 common stock and 1,500,000 shares of
Class E-3 common stock (collectively the "E Shares" ) with $.01 par value. The
stockholders of E Shares are entitled to one vote for each share held. Each E
Share was automatically convertible into one share of Class A common stock in
the event that the Company's income before provision of income taxes and
extraordinary items or any charges which result from the conversion of the E
Shares was equal to or in excess of a minimum value of approximately $13.5
million in fiscal 2000. Since the conversion provisions expired without being
met as of June 30, 2000, the E Shares were redeemed by the Company, effective as
of September 30, 2000. The former holders of E Shares will receive their
redemption value of $.0001 per share as well as $0.40 per share in settlement of
certain stockholder litigation beginning August 2002. See Note 15.
Warrants
Class C, Class E, Class G and Class K warrants were issued in connection with
the private placements of Series A, Series B, Series C and Series F Convertible
Preferred Stock. A total of 320,000 Class C, 317,788 Class E, 365,169 Class G
and 489,600 Class K warrants were granted to the preferred stockholders which
entitle the holder to purchase one share of Class A common stock at an exercise
price of $5.63, $7.24, $6.68 and $5.00, respectively, expiring from July 2000 to
November 2002. Each of the investors in the Series F Convertible Preferred Stock
previously invested in the Company's Series A, B and C Preferred Stock. In order
F-13
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
to induce them to invest in the Series F Convertible Preferred Stock, in
November 1999 the Company reduced the applicable exercise prices by twenty
percent and extended the expiration dates by three years for all outstanding
Class C, E and G warrants issued in connection with the sale of such Series A, B
and C Preferred Stock. A total of 64,000 Class D, 47,668 Class F, 58,427 Class H
and 125,000 Class L warrants were granted to the placement agent for each
private placement which entitles the holder to purchase one share of Class A
common stock at an exercise price of $5.63, $7.24, $6.68 and $5.00 respectively,
expiring from July 2002 until November 2004. The Company registered the resale
of the Class A common stock underlying the Series A, Series B, Series C and
Series F Preferred Stock and the associated warrants on individual Form S-3's
which are all effective. During fiscal 2001, 47,000 private placement warrants
were exercised resulting in the issuance of approximately 41,633 shares of Class
A common stock. During fiscal 2000, approximately 1.6 million private placement
warrants were exercised resulting in the issuance of approximately 1.3 million
shares of Class A common stock.
Other warrants include, warrants to purchase up to 281,250 shares of Class A
Common Stock at $6.00 per share at any time through November 10, 2009 issued to
Robert Ripp, on November 5, 1999 in connection with his election to serve as
Chairman of the Board of Directors. As part of the agrement, Robert Ripp
purchased 62,500 shares of LightPath Class A Common Stock for $4.00 per share.
In connection with the Geltech acquisition, the Company assumed a warrant to
purchase up to 6,753 shares of Class A Common Stock at $25.27 per share at any
time through June 2004. The underlying shares for these warrants were registered
on a Form S-3 which remain effective.
The following table provides information on warrants during fiscal 2002, 2001,
and 2000.
Warrants
-----------------------------------------------------
Class Class
C, E, G, D, F, H
Outstanding Class A & B I & K J & L Other
----------- ---------- ---------- ----------
June 30, 1999 4,519,000 914,068 123,345 --
---------- ---------- ---------- ----------
Issuance of securities 2,950,469 916,950 275,000 281,250
Conversions and exercises - equity (7,469,469) (1,392,371) (201,345) --
Conversions - debt -- (427,350) (150,000) --
---------- ---------- ---------- ----------
June 30, 2000 -- 11,297 47,000 281,250
---------- ---------- ---------- ----------
Issuance of securities 6,753
Conversions and exercises - equity -- -- (47,000) --
---------- ---------- ---------- ----------
June 30, 2001 -- 11,297 -- 288,003
---------- ---------- ---------- ----------
June 30, 2002 -- 11,297 -- 288,003
========== ========== ========== ==========
F-14
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
11. INCOME TAXES
Due to the Company's losses from operations, there was no provision for income
taxes during the years ended June 30, 2002, 2001, and 2000.
Significant components of the Company's deferred tax assets and liabilities are
as follows at June 30:
Deferred tax assets: 2002 2001
------------ ------------
Net operating loss and credit carryforwards $ 24,199,000 $ 20,648,000
Stock-based compensation 6,962,000 5,038,000
Investment in LightChip 3,056,000 523,000
Research and development expenses 1,195,000 232,000
Inventory 1,164,000 654,000
Accrued expenses and other 2,736,000 138,000
------------ ------------
Gross deferred tax assets 39,312,000 27,233,000
Valuation allowance for deferred tax assets (35,674,000) (20,968,000)
------------ ------------
Total deferred tax assets 3,638,000 6,265,000
Deferred tax liabilities:
Intangible assets (2,107,000) (8,704,000)
Depreciation and other (1,531,000) (877,000)
------------ ------------
Total deferred tax liabilities (3,638,000) (9,581,000)
------------ ------------
Net deferred tax liability $ -- $ (3,316,000)
============ ============
The valuation allowance increased by approximately $14.7 million and $17.6
million during the years ended June 30, 2002 and 2001, respectively. To the
extent that approximately $3.0 million of the valuation allowance related to
acquired tax attributes is reduced in future periods, the benefit will be
recognized as a reduction to goodwill and intangible assets prior to recording
any future benefits.
The reconciliation of income tax attributable to operations computed at the U.S.
federal statutory tax rates and the actual tax provision of zero results
primarily from the change in the valuation allowance.
At June 30, 2002, the Company has consolidated net operating loss carryforwards
for federal income tax purposes of approximately $60.5 million (including $8.5
million of acquired net operating losses) which will expire from 2009 through
2022, if not previously utilized. The Company also has research and development
credit carryforwards of approximately $660,000 which will expire from 2009
through 2022, if not previously utilized. A portion of the net operating loss
carryforwards and the majority of the research and development credit
carryforwards are subject to certain limitations of the Internal Revenue Code
which restrict their annual utilization in future periods due principally to
changes in ownership in prior periods.
12. EMPLOYEE AND DIRECTOR STOCK OPTION PLANS
At June 30, 2002, the Company has three stock based compensation plans which are
described below. The Company applies APB Opinion No. 25 and related
Interpretations and SFAS 123 (non-employee grants only) in accounting for its
plans. No compensation costs have been recognized for its fixed stock options
grants to employees where the fair market value of the underlying stock equaled
the option price at the date of grant.
In June 1992, the Company implemented the Omnibus Incentive Plan (the "Incentive
Plan"), and the Directors Stock Option Plan (the "Directors Plan"). The Company
has reserved 3,275,000 shares of common stock for awards under the Incentive
Plan. The number of shares reserved for award under the Directors Plan at June
30, 2002 is 450,000 shares of common stock.
The Incentive Plan authorizes the Company to grant various awards using common
stock, and cash to officers and key employees of the Company. Prior to fiscal
2001, only incentive stock options had been issued under the plan with an
F-15
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
exercise price equal to the fair market value of the underlying stock on the
date the options are granted and an average vesting period of four years. During
fiscal 2001, following the Geltech acquisition, the Company issued 130,000 stock
options with exercise prices below fair market value on the date of grant. In
addition, the Company issued 86,745 and 67,912 shares of common stock for time
accelerated restricted stock awards to management during fiscal 2002 and 2001
respectively, which vest upon continued employment for five years, or three
years if certain performance criteria are met. The intrinsic value of the
restricted stock awards is being recognized over the vesting period. The Company
recognized a stock-based compensation charge of approximately $310,000 and
$330,000 in fiscal 2002 and 2001 respectively, related to the restricted stock
awards and the in-the-money options. The term of the options granted under the
Incentive Plan cannot exceed ten years and grants to stockholders who hold 10%
or more of the Company stock cannot exceed five years from the date of grant.
There are approximately 323,000 options under the Incentive Plan available for
grant at June 30, 2002.
The Directors Plan authorizes the Company to grant awards to certain eligible
non-employee directors of the Company using common stock. Under the plan each
non-employee director receives options to purchase shares of the Company common
stock. Prior to fiscal 2001, the director's option vested ratably over their
three year term. In fiscal 2001, the plan adopted an annual grant which vest
monthly over the year. Each option granted under the Directors Plan will be
granted at a price equal to the fair market value of the underlying stock on the
date the options are granted with a term of ten years. There are approximately
63,000 options under the Director Plan available for grant at June 30, 2002.
In addition, the Company has issued nonqualified options to certain directors,
officers and consultants to the Company not covered by the Incentive or
Directors Plans. In November 1999, the Company entered into a Directors
Compensation Agreement, pursuant to which the Company's Chairman could elect to
receive a restricted stock grant if the closing price of the Company's Class A
common stock exceeded certain targets during the term of the agreement. During
the quarter ended March 31, 2000, the target prices defined in the agreement
were reached resulting in the recording of a non-cash stock-based compensation
charge which was subject to adjustment for changes in the market value of the
Class A common stock. Accordingly through March 31, 2000, the Company recognized
a non-cash stock-based compensation charge of approximately $710,000, under the
terms of the original agreement. Subsequent to March 31, 2000, the Company
modified the terms of the Directors Compensation Agreement whereby the share
substitution clause was deleted. The Chairman received two nonqualified stock
option grants to acquire 1 million and 500,000 shares each of Class A Common
Stock with a ten-year term which vest on December 1, 2001. The exercise prices
are $6 and $24 per share, respectively. Based on the terms of the options
granted (1 million granted with an exercise prices less than market), non-cash
charges of approximately $18 million will be amortized over the vesting period
of the options. In addition, 219,000 and 150,000 options were granted in fiscal
2001 and 2000, respectively, to officers at a price equal to the fair market
value of the underlying stock on the date of grant, with a term of ten years.
The board of directors accelerated the vesting of certain options issued which
resulted in the recording of stock-based compensation charges of approximately
$35,000 and $400,000 during the years ended June 30, 2001 and 2000,
respectively. In the aggregate, approximately $4.8 million, $11.2 million and
$3.1 million of non-cash charges were recorded for the years ended June 30,
2002, 2001 and 2000, respectively.
F-16
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
A summary of the status of the stock option plans as of June 30, 2002, 2001 and
2000 and changes during the years ended is presented below:
Weighted
Average
Shares under option: Incentive Plan Directors Plan Nonqualified Exercise Price
-------------- -------------- ------------ --------------
Outstanding at June 30, 1999 998,874 206,049 39,928 $ 6.29
Granted at market value 718,321 60,227 650,000 $ 16.47
Granted below market value -- -- 1,000,000 $ 6.00
Exercised (419,257) (36,000) -- $ 4.77
Lapsed or canceled (18,181) -- (435) $ 5.18
---------- ---------- ---------- ----------
Outstanding at June 30, 2000 1,279,757 230,276 1,689,493 $ 10.82
Granted at market value 1,032,781 80,000 219,000 $ 17.00
Granted below market value 130,000 -- -- $ 33.43
Exercised (254,656) (46,510) (7,645) $ 4.96
Lapsed or canceled (68,400) (24,642) (10,000) $ 14.99
---------- ---------- ---------- ----------
Outstanding at June 30, 2001 2,119,482 239,124 1,890,848 $ 13.86
Granted at market value 643,145 64,000 262,000 $ 3.64
Exercised (107,500) -- -- $ 2.75
Lapsed or canceled (526,687) -- (66,000) $ 12.42
---------- ---------- ---------- ----------
Outstanding at June 30, 2002 2,128,440 303,124 2,086,848 $ 12.12
========== ========== ========== ==========
Options exercisable:
June 30, 2002 823,201 295,204 1,668,848 $ 12.46
========== ========== ========== ==========
June 30, 2001 565,270 215,188 66,848 $ 11.31
========== ========== ========== ==========
June 30, 2000 487,591 180,728 39,493 $ 6.67
========== ========== ========== ==========
The following table summarizes information about fixed stock options outstanding
at June 30, 2002:
Options Outstanding Options Exercisable
------------------------------------------------- --------------------------------
Number Weighted-Avg. Number
Range of outstanding at Remaining Weighted-Avg. Exercisable at Weighted-Avg.
Exercise Prices June 30, 2002 Contractual Life Exercise Price June 30, 2002 Exercise Price
- --------------- ------------- ---------------- -------------- ------------- --------------
$1 to 7.49 2,278,172 8.0 Years $ 4.97 1,475,266 $ 5.67
$7.5 to 15 716,000 8.0 $10.69 325,425 $10.12
$16 to 20 476,750 8.2 $17.80 228,500 $17.71
$21 to 30 889,522 8.0 $24.56 704,094 $24.33
$31 to 52 157,968 7.6 $34.34 53,968 $35.36
---------- ----------
$1 to 52 4,518,412 8.0 $12.12 2,787,253 $12.46
========== ==========
Had compensation costs for the Company's stock based compensation plans been
determined using the fair value method of FASB Statement No. 123, the Company's
net loss would have been increased to the pro forma amounts indicated below for
the years ended June 30:
2002 2001 2000
-------------- -------------- --------------
Net loss applicable to common shareholders, as reported $ (50,745,243) $(60,852,910)) $ (17,842,010)
============== ============== ==============
Net loss applicable to common shareholders, pro forma $ (55,829,000) $ (62,328,000) $ (18,719,000)
============== ============== ==============
Basic and diluted net loss per share, as reported $ (2.56) $ (3.19) $ (1.86)
============== ============== ==============
Basic and diluted net loss per share, pro forma $ (2.82) $ (3.27) $ (1.95)
============== ============== ==============
F-17
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
The weighted-average fair value of options granted during the years ended June
30, 2002, 2001 and 2000 was $2.89, $13.63, and $9.33, respectively. The fair
value of each incentive option grant is estimated on the date of grant using the
Black-Scholes option-pricing model with the following weighted-average
assumptions used for grants in fiscal:
2002 2001 2000
--- --- ---
Expected Life (years) 3 3 3
Risk free interest rate 6% 7% 7%
Volatility 150% 125% 125%
Dividend Yield 0% 0% 0%
13. NET LOSS PER SHARE
Basic net loss per common share is computed based upon the weighted average
number of common shares outstanding during each period presented. The
computation of Diluted net loss per common share does not differ from the basic
computation because potentially issuable securities would be anti-dilutive. The
following outstanding securities were not included in the computation of diluted
earnings per share at June 30, 2002: 4,518,412 Class A common stock options, and
private placement and other warrants to acquire 299,300 shares of Class A common
stock.
A premium ranging from 7 to 8 percent earned by the preferred shareholders of
$61,906, $89,549, and $137,281 increased the net loss applicable to common
shareholders for the years ended June 30, 2002, 2001, and 2000, respectively. In
addition, net loss applicable to common shareholders was increased by an imputed
dividend in the amount of $2,094,662 during the year ended June 30, 2000. The
imputed dividend resulted from a beneficial conversion feature associated with
the Series F Preferred Stock issued on November 2, 1999.
14. PENSION PLAN
The Company implemented a defined contribution plan on January 1, 1997 covering
substantially all employees. Annual discretionary contributions, if any, are
made by the Company to match a portion of the funds employees contribute.
Company matching contributions during the fiscal year ended June 30, 2001 were
approximately $65,000. There were no company matching contributions made during
the fiscal years ended June 30, 2002 and 2000.
15. COMMITMENTS AND CONTINGENCIES
The Company has operating leases for office equipment and office space. At June
30, 2002, the Company has entered into lease agreements for manufacturing and
office facilities in Albuquerque, New Mexico, Walnut, California, New Jersey,
and Orlando, Florida. These leases, which are generally for five year terms with
renewal options, expire beginning in September 2002 through November 2008.
Equipment rental agreements are generally for three year terms. Equipment and
office rent expense recognized for the years ended June 30, 2002, 2001, and 2000
was approximately $1.5 million, $950,000, and $285,000, respectively.
Commitments under noncancelable operating leases, excluding amounts accrued as
exit costs in connection with the Company's plan to relocate operations to
Florida (see note 7),are approximately $0.8 million for 2003; $0.7 million for
2004; $0.6 million for 2005; $0.6 million for 2006 and $1.5 million for 2007 and
beyond.
The Company has employment agreements, which expire in March 2003 through
September 2003, with officers and key employees which provide for an aggregate
payment of salaries of approximately $0.7 million annually. The Company has
outstanding purchase commitments for approximately $300,000 at June 30, 2002.
The majority of these commitments are for raw materials and lens finishing.
F-18
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
On May 2, 2000, the Company commenced a class action lawsuit in the Chancery
Court of Delaware, New Castle County. The action seeks a declaratory judgment
with respect to the Company's right to redeem the Class E Common Stock on March
31, 2001 for $.0001 per share, the right of the holders of Class E Common Stock
to vote at the Annual Meeting to be held on October 6, 2000, and for
certification of the holders of Class E Common Stock as a class and the named
defendants as its representatives. The named defendants are Donald E. Lawson,
former President, Chief Executive Officer and a Director of the Company, who
owns an aggregate of 25,000 shares of Class E Common Stock, Louis G. Leeburg, a
Director of the Company, who owns an aggregate of 7,272 shares of Class E Common
Stock, and William Leeburg, who owns or controls an aggregate of 21,816 shares
of Class E Common Stock. The Company entered into a proposed settlement of this
lawsuit whereby the holders of Class E Common Stock could elect to receive
either $.40 for each share of Class E Common Stock or a two year option to
purchase one Class A Common Stock for each 100 shares of Class E Common Stock
they hold. On January 8, 2001, the Delaware Chancery Court held a hearing on the
proposed settlement and ruled on February 2, 2001, that holders of Class E
Common Stock must be provided an opportunity to request exclusion from the
settlement class. In December 2001, the Company agreed to proceed with the
settlement to include a provision that each former E shareholder has the right
to request exclusion from the settlement class. By June 30, 2002, the final
settlement arrangements had been mailed to former holders of Class E Common
Stock pursuant to which they would receive a settlement payment of $0.40 for
each share. Approximately 3.6 million shares of Class E Common Stock will
participate in the settlement whereas holders of approximately 0.5 million
shares opted out of the settlement. The Company has determined that it is
probable that the settlement offer will occur and an estimated settlement charge
of $1.5 million has been accrued as of June 30, 2002.
On or about June 9, 2000, a small group of holders of Class E Common Stock (the
"Texas Plaintiffs") commenced an action in a state court in Texas (the "Texas
Action"). The Texas Plaintiffs allege that the actions of the Company, and
certain named individuals, leading up to and surrounding the Company's 1995
proxy statement constitute fraud, negligent misrepresentation, fraudulent
inducement, breach of fiduciary duty and civil conspiracy. In general, the Texas
Plaintiffs allege misrepresentations and omissions in connection with a request
from the Company that its shareholders consent to a recapitalization, resulting
in a 5.5 to 1 reverse stock split and the issuance of certain Class E Common
Stock. The Texas Plaintiffs further allege that, as a result of the defendants'
actions, they were induced to consent to the Company's recapitalization. The
Company believes the allegations underlying the Texas Action have no basis in
fact and that this lawsuit is without merit. The Company has retained counsel
and is vigorously defending against these claims. The participants in the Texas
Action will be provided the opportunity to accept the settlement discussed
above. In addition, the Company participated in a mediation proceeding relating
to the Texas Action on October 23, 2001. During fiscal 2002, the Company
incurred and expensed legal fees associated with these claims of approximately
$0.7 million, however, an insurance claim for the aggregate amount incurred in
connection with the Texas Action in excess of applicable deductibles has been
filed by the Company. During the first quarter of fiscal 2002, one of the
insurance companies responsible for the claim, which had previously filed for
reorganization, was declared insolvent. The Company is working with regulatory
agencies to resolve and collect the monies due under this policy, although the
Company currently considers any potential recovery under this policy as
speculative. Accordingly, no claim for recovery is recorded as of June 30, 2002.
On March 6, 2002, the Company commenced an action in a state court in New Mexico
for various claims surrounding the now insolvent insurance carrier and the
Company's former insurance broker.
On November 15, 2000, the Company filed a complaint against Carmichael & Company
LLC, in the State of New Mexico, for violation of its agreement with the Company
as financial advisors and sought to terminate the agreement. On or about
November 15, 2000, Carmichael & Company LLC filed a complaint against the
Company in the State of New York, for breach of contract and claiming
approximately $5 million in damages. On April 5, 2001, the parties met in New
Mexico for mediation and was settled by payment of $1.3 million to Carmichael.
The Company incurred approximately $300,000 in legal fees in connection with
this matter during fiscal 2001. The financial advisor contract with Carmichael &
Company LLC was terminated and both parties released the other from any further
claims.
F-19
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
The Company is involved in various legal actions arising in the normal course of
business. After taking into consideration legal counsel's evaluation of such
actions, management is of the opinion that their outcome will not have a
significant effect on the Company's financial position or results of operations.
16. RELATED PARTY TRANSACTIONS
During the fiscal years ended June 30, 2002, 2001, and 2000, current directors
(or their firms) of the Company, provided legal and consulting services to the
Company for which they billed the Company an aggregate of approximately
$478,000, $405,000, and $425,000, respectively.
Sales to Lucent Technologies, Inc., which owned approximately 3% of the
outstanding Class A common stock of the Company, for the year ended June 30,
2000 were approximately $930,000.
17. SEGMENT INFORMATION
Optoelectronics and Fiber Telecommunications ("Telecom"), represents 67% of
total fiscal 2002 revenues of the Company, and Traditional Optics, represent 33%
of total fiscal 2002 revenues, are the Company's reportable segments under SFAS
No. 131,"Disclosure about Segments of an Enterprise and Related Information"
(SFAS 131). The telecom segment is based primarily on the development and sale
of fiber collimators and fiber-optic switches, free space isolators, precision
molded aspheric optics and other related passive component products for the
optoelectronics segment of the telecommunications industry. The traditional
optics segment is based primarily upon the sale of lenses to the data storage
and medical equipment market and the development and sale of GRADIUM glass in
the form of lenses and blanks for the general optics markets. During fiscal 2002
approximately $3.4 million in telecom sales were derived from two isolator
customers. During fiscal 2001 approximately $13.4 million in telecom sales were
derived from one isolator and one collimator customer and approximately $.6
million of traditional lens sales were derived from one medical equipment
customer. During fiscal 2000 approximately $1.3 million in sales were derived
from one isolator and one collimator customer and approximately $227,000 of lens
sales were derived from two YAG laser customers.
F-20
LightPath Technologies, Inc.
Notes to Consolidated Financial Statements
June 30, 2002 and 2001 (Continued)
Summarized financial information concerning the Company's reportable segments
for the respective years ended June 30, is shown in the following table.
Traditional Corporate
Segment Information Telecom Optics And other (1) Total
- ------------------- ------- ------ ------------- -----
Revenues (2)
2002 $ 8,339,467 4,167,115 -- $ 12,506,582
2001 $ 21,076,466 5,066,690 -- $ 26,143,156
2000 $ 1,497,911 768,353 -- $ 2,266,264
Segment operating loss (3)
2002 $ (11,705,885) (4,006,492) (35,869,368) $(51,581,745)
2001 $ (7,201,837) 73,162 (55,997,603) $(63,126,278)
2000 $ (7,540,317) (365,316) (8,292,289) $(16,197,922)
Depreciation and amortization
2002 $ 8,147,870 2,534,427 240,234 $ 10,922,531
2001 $ 13,450,705 2,617,060 194,024 $ 16,261,789
2000 $ 2,468,543 558,205 63,574 $ 3,090,322
Capital expenditures for
segment assets
2002 $ 1,649,634 401,379 706,515 $ 2,757,528
2001 $ 5,500,656 1,146,402 583,636 $ 7,230,694
2000 $ 2,768,108 2,255,552 124,778 $ 5,148,438
Total assets
2002 $ 16,733,907 5,283,454 14,959,867 $ 36,977,228
2001 $ 40,307,590 12,899,691 31,083,127 $ 84,290,408
Other Foreign
Geographic Countries
Information United States Canada (over 15) Total
- ----------- ------------- ------ --------- -----
Revenues (4)
2002 $ 10,810,964 371,539 1,324,079 $ 12,506,582
2001 $ 22,236,329 1,678,633 2,228,194 $ 26,143,156
2000 $ 1,749,974 -- 516,290 $ 2,266,264
- ----------
(1) Corporate functions include certain members of executive management, the
corporate accounting and finance function and other typical administrative
functions which are not allocated to segments. Corporate assets include
cash and cash equivalents, other receivables, advances, prepaid expenses
and unallocated property and equipment. The Company's investment in
LightChip is included in the assets of the Telecom segment.
(2) There were no material inter-segment sales during the years ended June 30,
2002, 2001 or 2000.
(3) In addition to unallocated corporate functions, management does not
allocate restructuring charges, impairments, interest expense, interest
income, other non-operating income and expense amounts in the determination
of the operating performance of the reportable segments
(4) Revenues attributed to foreign countries are export sales, and are based on
the destination of the shipment. The Company has no long lived assets in a
foreign country.
F-21
LIGHTPATH TECHNOLOGIES, INC.
In accordance with Section 13 or 15(d) of the Exchange Act, the registrant has
duly caused this Report to be signed on its behalf by the undersigned, thereunto
duly authorized.
LIGHTPATH TECHNOLOGIES, INC.
By: /s/ Robert Ripp August 29, 2002
------------------------------------
ROBERT RIPP DATE
CHAIRMAN AND INTERIM CHIEF EXECUTIVE
OFFICER, PRESIDENT
In accordance with the Exchange Act, this report has been signed below by the
following persons on behalf of the registrant and in the capacities and on the
dates indicated.
/s/ Robert Ripp August 29, 2002 /s/ Kenneth Brizel August 29, 2002
- --------------------------------------------- ---------------------------------------
Robert Ripp Kenneth Brizel, as of July 8, 2002
Chief Executive Officer, Interim Chief Executive Officer, President and
President Director (Principal Executive Officer)
(Principal Executive Officer)
/s/ Donna R. Bogue August 29, 2002
- ---------------------------------------------
Donna R. Bogue
Senior Vice President, Chief
Financial Officer and Treasurer
(Principal Financial Officer)
/s/ Robert Ripp August 29, 2002 /s/ James L. Adler Jr. August 29, 2002
- --------------------------------------------- ---------------------------------------
Robert Ripp James L. Adler Jr.
Chairman of the Board Director
/s/ Robert Bruggeworth August 29, 2002 /s/ Louis Leeburg August 29, 2002
- --------------------------------------------- ---------------------------------------
Robert Bruggeworth Louis Leeburg
Director Director
/s/ Dr. Steven R. J. Brueck August 29, 2002 /s/ Gary Silverman August 29, 2002
- --------------------------------------------- ---------------------------------------
Dr. Steven R. J. Brueck Gary Silverman
Director Director
56
CERTIFICATION
I, Robert Ripp, certify that:
1. I have reviewed this annual report on Form 10-K of LightPath
Technologies, Inc.;
2. Based on my knowledge, this annual report does not contain any untrue
statement of a material fact or omit to state a material fact
necessary to make the statements made, in light of the circumstances
under which such statements were made, not misleading with respect to
the period covered by this annual report; and
3. Based on my knowledge, the financial statements, and other financial
information included in this annual report, fairly present in all
material respects the financial condition, results of operations and
cash flows of the registrant as of, and for, the periods presented in
this annual report.
Date: August 29, 2002
/s/ Robert Ripp
-------------------------------
Chief Executive Officer,
LightPath Technologies, Inc.
I, Donna Bogue, certify that:
4. I have reviewed this annual report on Form 10-K of LightPath
Technologies, Inc.;
5. Based on my knowledge, this annual report does not contain any untrue
statement of a material fact or omit to state a material fact
necessary to make the statements made, in light of the circumstances
under which such statements were made, not misleading with respect to
the period covered by this annual report; and
6. Based on my knowledge, the financial statements, and other financial
information included in this annual report, fairly present in all
material respects the financial condition, results of operations and
cash flows of the registrant as of, and for, the periods presented in
this annual report.
Date: August 29, 2002
/s/ Donna Bogue
-------------------------------
Chief Financial Officer,
LightPath Technologies, Inc.
57