UNITED STATES
SECURITIES AND
EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(x) ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended October 31, 2001
OR
( ) TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
For the transition period from to
Commission file number 0-2389
ROANOKE ELECTRIC STEEL CORPORATION
(Exact
name of Registrant as specified in its charter)
Virginia | 54-0585263 | |
(State or other jurisdiction of | (I.R.S. Employer | |
incorporation or organization) | Identification No.) | |
P.O. Box 13948, Roanoke, Virginia | 24038-3948 | |
(Address of principal executive offices) | (Zip Code) |
Registrant's telephone number, including area code: (540) 342-1831
Securities registered pursuant to Section 12(b) of the Act: None
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, No Par Value
(Title of class)
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to such filing requirements for the past 90 days. Yes x No
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. (x)
State the aggregate market value of the voting stock held by nonaffiliates of the Registrant.
Aggregate market value at December 31, 2001: $137,783,105
Indicate the number of shares outstanding
of each of the Registrant's classes of common stock, as of
December 31, 2001.
10,912,188 Shares outstanding
Portions of the following documents are incorporated by reference:
(1) 2001 Annual Report to Stockholders in Parts II and IV.
(2) Proxy Statement dated December 26,
2001 in Part III.
PART I
ITEM 1. BUSINESS
(a) General Development of Business.
During
the fiscal year ended October 31, 2001, the Registrant continued for the most
part to operate its business as it has the past four years by manufacturing
merchant steel bar products, fabricating open-web steel joists and concrete
reinforcing steel, and extracting scrap steel and other materials from junked
automobiles. Roanoke Technical Treatment & Services, Inc., a Roanoke, Virginia
subsidiary, was formed in 1990 to license a process for the treatment of electric
arc furnace dust, but the opportunity never materialized. During fiscal year
1994, the Registrant's auto shredding subsidiary, Shredded Products Corporation,
completed construction of a modern facility in Rocky Mount, Virginia, and in
November 1994 began operations at this locality, at a total investment in excess
of $8,000,000 for plant and equipment. This facility, with its own landfill,
is providing considerable savings in waste disposal costs. In addition, cost
savings and better metal recoveries are being achieved through the use of the
more technologically advanced equipment.
During the
later part of 1996, the Registrant, at its main plant, completed the installation
of a new ladle refining furnace and the upgrade of an electric arc furnace,
for approximately $17,000,000. With this new state-of-the-art equipment in operation,
the Registrant has increased raw steel production, improved quality, reduced
production costs and improved operating efficiencies. In January 1996, Socar,
Incorporated , a South Carolina subsidiary, sold its long-time idle plant in
Bucyrus, Ohio to the unaffiliated manufacturer who had been leasing the facility
for several years under a lease-purchase agreement, for a final settlement price
of $130,000.
On December
16, 1998, the Registrant acquired all of the outstanding common shares of Steel
of West Virginia, Inc. ("SWVA"), a Huntington, West Virginia steel manufacturer,
upon completion of its cash tender offer. The consideration given was approximately
$117.1 million, including the assumption of approximately $52.3 million of indebtedness,
which translates into $10.75 net per SWVA share, for approximately 6,028,000
shares on a fully-diluted basis. Upon merger, SWVA became a wholly-owned subsidiary
of Roanoke Electric Steel Corporation, and each share of SWVA common stock not
purchased in the offer (approximately 3.6% of SWVA's outstanding shares) was
converted, subject to appraisal rights, into the right to receive $10.75 in
cash, without interest. On the date of acquisition the Registrant closed on
$180,000,000 of secured credit facilities with a syndicate of four banks. The
facilities were comprised of a $150,000,000 seven year term loan and a $30,000,000
five year revolver. The term loan was used to purchase all of the outstanding
capital stock of SWVA, and refinance both the existing term debt of the Registrant
and most of SWVA's bank debt assumed through the merger. SWVA operates a mini-mill
in Huntington, West Virginia, and steel fabrication facilities in Huntington
and Memphis, Tennessee, while custom designing and manufacturing special steel
products principally for use in the construction of truck trailers, industrial
lift
PART I
(con'd.)
trucks, off-highway construction equipment (such as bulldozers and graders), manufactured housing, guardrail posts and mining equipment. The Registrant and SWVA do not generally compete as regards customers and products. The acquisition was accounted for as a purchase. Accordingly, the results of operations and cash flows were reflected in the consolidated financial statements from the date of acquisition, and the acquired assets and liabilities were included in the 1999 consolidated balance sheet at values based on a purchase price allocation, rendered through appraisals and other evaluations.
The other
subsidiaries of the Registrant, John W. Hancock, Jr., Inc. and RESCO Steel Products
Corporation, have had no material changes in operations or in the mode of conducting
their business for the past five years. John W. Hancock, Jr. founded both the
Hancock joist subsidiary and its parent, Roanoke Electric Steel Corporation,
and served on the Registrant's Board of Directors as Chairman of the Executive
Committee until his death in March 1994.
(b) Financial Information
about Industry Segments.
The Registrant's
business consists of one industry segment or line of business, which is the
extracting of scrap metal from discarded automobiles and the manufacturing,
fabricating and marketing of merchant steel bar products and specialty steel
sections, reinforcing bars, open-web steel joists and billets. The industry
segment consists of three classes of products - merchant steel products and
specialty steel sections, fabricated bar joists and reinforcing bars and billets.
FINANCIAL INFORMATION RELATING TO
INDUSTRY SEGMENTS
AND CLASSES OF PRODUCTS OR SERVICES
2001 | 2000 | 1999 | |
Sales to Unaffiliated Customers: | |||
Merchant Steel and Specialty | |||
Steel Sections | $190,631,577 | $228,202,644 | $210,850,231 |
Bar Joists and Rebar | 101,985,847 | 122,549,851 | 125,854,046 |
Billets | 15,057,181 | 21,975,613 | 36,258,673 |
Total Consolidated Sales | $307,674,605 | $372,728,108 | $372,962,950 |
Net Earnings from Operations | $1,348,022 | $14,061,449 | $22,479,179 |
Identifiable Assets | $316,886,778 | $339,678,909 | $352,045,812 |
PART I
(con'd.)
(c)
Narrative Description of Business.
(1)
(i) The Registrant manufactures merchant steel products consisting of Angles,
Plain Rounds, Flats, Channels and Reinforcing Bars of various lengths and sizes.
The principal markets for the Registrant's products are steel fabricators and
steel service centers. The products are distributed directly to customers from
orders solicited by a paid sales staff of the Registrant.
The Registrant's
subsidiary, Shredded Products Corporation, is involved in the extraction of
scrap iron and steel and other metals from junked automobiles and other waste
materials. Almost all of the ferrous material is used by the Parent as raw materials.
The non-ferrous metals are sold to unrelated purchasers.
Two other
subsidiaries, John W. Hancock, Jr., Inc. and Socar, Incorporated, are engaged
in the manufacturing of long- and short-span steel joists. Joists are open-web
steel horizontal supports for floors and roofs, used primarily in the construction
of commercial and industrial buildings such as shopping centers, factories,
warehouses, hospitals, schools, office buildings, nursing homes, and the like.
Joists are cheaper and lighter than structural steel or reinforced concrete.
The joists are distributed by these subsidiaries to their customers from orders
solicited by manufacturer's representatives and pursuant to successful bids
placed directly by the subsidiaries.
The Registrant's subsidiary, RESCO Steel Products Corporation, fabricates concrete
reinforcing steel by cutting and bending rebars to contractors' specifications.
The rebars are distributed to contractors from orders solicited by a paid sales
staff and pursuant to successful bids placed directly by the subsidiary.
The Registrant's
subsidiary, Steel of West Virginia, Inc., operates both a steel mini-mill which
produces specialty steel sections, and fabrication facilities which add finishing
operations to create custom-designed products placed directly into customers'
assembly lines. The niche markets supplied with these cross-member and sub-frame
section of products include truck trailers, industrial lift trucks, guardrail
posts, manufactured housing, off-highway construction equipment, and mining
equipment. These products are marketed by senior management and in-house sales
representatives of SWVA, whose sales efforts cover all of the continental United
States, and to a very small degree, certain foreign markets.
(ii) The Registrant
has not in fiscal 2001 introduced a new product or begun to do business in a
new industry segment that will require the investment of a material amount of
assets or that otherwise is material.
PART I
(con'd.)
(iii)
The Registrant's main raw material, scrap steel, is supplied for the most part
by scrap dealers within a 250 mile radius of the mill. This raw material is
purchased through the David J. Joseph Company, scrap brokers. The Shredded Products
subsidiary supplies 10,000 to 15,000 tons of scrap per month. Although scrap
is generally available to the Registrant, the price of scrap steel is highly
responsive to changes in demand, including demand in foreign countries as well
as in the United States. The ability to maintain satisfactory profit margins
in times when scrap is relatively high priced is dependent upon the levels of
steel prices, which are determined by market forces. Alloys and other materials
needed for the melting process are provided by various domestic and foreign
companies.
Shredded Products
Corporation often experiences difficulty in purchasing scrap automobiles at a
satisfactory level. Competition from an increasing number of shredding operations
and reluctance by dealers to sell scrap automobiles due to market conditions are
the main causes. High offering prices generally increase the supply; however,
the increased cost to produce sometimes is very comparable to the price of similar
scrap that can be purchased on the outside.
Substantially
all of John W. Hancock, Jr., Inc.'s steel components are purchased from the
Parent, which is located conveniently nearby and, therefore such components
are generally available to the subsidiary as needed.
RESCO Steel
Products Corporation purchases most of its steel components from suppliers within
its market area, determined mainly by freight cost. Such components would be
generally available to the subsidiary, since the Parent could produce and supply
this raw material, as needed.
Socar, Incorporated
receives most of its raw steel material from the Parent and other nearby suppliers,
the determinant usually being freight cost. The availability of raw materials
is not of major concern to the subsidiary, since the Parent could supply most
of its needs.
Steel of West
Virginia, Inc., like the Parent, uses scrap steel as its main raw material.
Even though the purchase of steel scrap is subject to market conditions largely
beyond its control, the subsidiary is located in a scrap surplus region, and
therefore typically maintains less than a one month supply of scrap, which keeps
inventory costs to a minimum. Although one scrap dealer supplies 25% to 30%
of SWVA's requirements, the subsidiary believes that a number of adequate sources
of scrap and other raw materials that it uses are readily available. SWVA has
historically been successful in passing on scrap cost increases through price
increases, however, the effect of market price competition has limited the subsidiary's
ability to increase prices.
PART I
(con'd.)
(iv)
The Registrant currently holds no patents, trade marks, licenses, franchises
or concessions that are material to its business operations.
(v) The business
of the Registrant is not seasonal.
(vi) The Registrant
does not offer extended payment terms to its customers, nor is it normally required
to carry significant amounts of inventory to meet rapid delivery requirements
of customers; although, at times market conditions have required the stockpiling
of popular bar products for rapid delivery. Working capital practices generally
remain constant during the course of business except when the Registrant determines
it to be advantageous to stockpile raw materials due to price considerations.
(vii) During
fiscal year 2001, sales (tons) by the Registrant to Steel of West Virginia,
Inc., John W. Hancock, Jr., Inc., Socar, Incorporated and RESCO Steel Products
Corporation, wholly-owned subsidiaries, were approximately 8%, 10%, 7% and 1%
of the Registrant's total sales (tons), respectively. During fiscal year 2001,
the largest nonaffiliated customer purchased approximately 5% of total sales
(tons) -- 2% of total sales (dollars). During fiscal year 2000, the largest
nonaffiliated customer purchased approximately 8% of total sales (tons)--3%
of total sales (dollars), significantly down from recent years, as poor market
conditions in the steel industry contributed to this customer's worsened financial
condition and eventual bankruptcy. The bankruptcy resulted in a charge to bad
debts of $2.6 million and contributed to lower billet production levels. Poor
market conditions prevented placing the lost tonnage with alternate sources.
However, under normal market conditions, we would not expect the loss of either
of these customers to have a materially adverse effect on the Registrant and
its subsidiaries taken as a whole. In addition, considerably more billet tons
were used internally by SWVA, which helped to mitigate the lost billet sales.
(viii) The
Registrant is of the opinion that the amount of its backlog is not generally
material to an understanding of the business. All backlog is shipped within
the current fiscal year.
(ix) None
of the business of the Registrant is subject to renegotiation of profits or
termination of contracts or subcontracts at the election of the Government.
(x) The Registrant
competes with steel-producing mills of similar size operative within its market
region and also larger mills producing similar products. The market region in
which the Registrant sells its products mainly consists of the majority of states
east of the Mississippi River. Price, including transportation cost, is the
major determinant in securing business. Even though market conditions and backlogs
remained strong for much of 1995, shipments were flat due to customers' inventory
reductions, while improved selling prices were attributable to higher raw material
costs and rising demand, although by year-end prices fell slightly. Demand and
backlogs continued high through 1996, allowing for increased bar product shipments,
in
PART I
(con'd.)
spite of increased competition, which forced sharp
reductions in selling prices throughout the industry. As competition eased
during 1997, bar product shipments increased with higher demand, causing
improvements in order levels, backlogs and prices. Strong business conditions
kept bar prices up during fiscal 1998, in spite of the temporary drop in
merchant bar shipments, caused by excess inventories at steel service centers.
On December 16, 1998, the Registrant acquired 100% of the capital stock of Steel
of West Virginia, Inc. ("SWVA"), a steel manufacturer, and 1999 results reflect
the operations of SWVA from the date of acquisition. The 1998 financial
statements were not restated to include SWVA because the acquisition was treated
as a purchase for accounting purposes. Consequently, the significant increase in
1999 sales was due, primarily, to the inclusion of SWVA's revenues in
consolidated sales. Increased competition from foreign and domestic producers
prompted industry-wide list price reductions for bar products at the beginning
of fiscal 1999, and prices had not fully recovered by year end. Excess
inventories at steel service centers and a shortage of transportation equipment
contributed to the slight reduction in tons shipped of bar products as bar
markets were generally good throughout the year. Sales for 2000 were flat due,
again, to the acquisition of SWVA. Sales for the current year included SWVA's
revenues for the entire period, whereas sales for 1999 included only the portion
of SWVA's revenues from the date of acquisition. Average selling prices for bar
and specialty products increased slightly for 2000, but list prices had fallen
sharply by the end of the year as a result of increased foreign and domestic
competition. The increased competition and price uncertainty reduced order entry
and backlogs and caused decreases in both bar and specialty products shipments.
Depressed economic conditions within the steel industry and certain niche
markets resulted in the decline of 2001 sales. Selling prices for merchant bar
and specialty steel products declined due to heightened foreign and domestic
competition. Shipments of specialty products were down, primarily, as a result
of depressed economic conditions within major market segments. However, sales
were positively affected by an increase in tons shipped of merchant bar
products, due to new product offerings and declining inventory levels at steel
service centers.
The joist
business is highly competitive. Due to similarity of product, relatively small
price differences are often determinative in placing business. Ability to meet
the customer's time requirements for delivery also is important in securing
business. Competing successfully becomes more difficult with the distance to
point of delivery due to transportation costs. Reduced competition and increased
activity in 1995 led to higher shipment levels within the construction industry,
as demand and increased raw material costs forced selling prices higher. Generally
strong business conditions within the commercial construction industry continued
during 1996 to bring improvements to selling prices for fabricated products,
while shipment levels were relatively flat, as weather related construction
delays offset otherwise strong demand. Even though market conditions continued
PART I
(con'd.)
to be favorable during 1997, competition
within the industry forced lower selling prices for fabricated products, and
also kept shipment levels flat. Continued favorable market conditions in the
construction industry during fiscal 1998 led to the increased shipments and
level selling prices for fabricated products. Competitive conditions within
the commercial construction industry generally impact selling prices and shipment
levels of fabricated products and were relatively favorable during 1999 as reflected
in the higher selling prices. The reduced shipments were caused by minor factors
other than competition as business conditions continued strong and backlogs
remained high. In 2000, the decline in fabricated products selling prices and
shipments was caused by increased competition within the construction industry,
even though business conditions continued strong and backlogs were high. The
decline in shipments was also affected by shortages of structural steel components.
Economic conditions within the construction industry began to slide during 2001,
as a result of increased competition, bringing prices lower. Fabricated products
shipments decreased as construction activity slowed dramatically during the
latter part of the year, as a result of poor business conditions.
Billets are
semi-finished products used by the Registrant, and the SWVA subsidiary, in their
rolling mill processes to manufacture various merchant bar products and specialty
steel sections. Excess billet production is sold to nonaffiliated customers
who further fabricate the billets for various end uses. Improved market conditions
and increased domestic demand resulted in improved 1995 billet shipments, as
export markets remained highly competitive. Higher scrap steel costs, which
normally trigger higher prices, and improved product mix together caused billet
selling prices to climb. A planned melt shop shutdown during 1996 to install
a new ladle furnace and upgrade an electric arc furnace was unexpectedly prolonged
due to problems with construction and installation, resulting in a sharp decline
in billet production and causing a significant reduction in billet shipments
for the year, while the highly competitive export market remained in effect.
Billet selling prices declined with a downward trend in scrap prices. Increased
billet shipments for 1997 resulted both from increased production, which hampered
shipments in 1996, and improved domestic demand, as export markets remained
very competitive. Lower scrap prices continued to keep billet prices down. The
significant increase in billet shipments for fiscal 1998 was attributable to
record raw steel production, coupled with unprecedented demand. Billet prices
were flat due to relatively unchanged scrap prices. A dramatic change in our
market for billets during 1999 brought diminished demand and a significant decline
in tons shipped. Billet selling prices declined with sharp reductions in scrap
prices. The dramatic reduction in billet shipments, again in 2000, and the continued
drop in market conditions was attributable to the financial condition and eventual
bankruptcy of a major customer. Shipments to this customer were purposely curtailed
to reduce our exposure to bad debts. Due to market conditions, we were not able
to place the lost tonnage with alternate sources, other than the tons used
PART I
(con'd.)
internally by SWVA. Billet selling prices
were higher due to increased scrap prices. In 2001, billet shipments declined,
due to poor market conditions and the loss of the major customer referred to
earlier. Selling prices for billets were lower, mostly attributable to falling
scrap steel costs.
(xi) During
the last three fiscal years, the Registrant was not involved in any material
research and development activities.
(xii) The
Parent, Shredded Products and SWVA are subject to federal, state and local environmental
laws and regulations concerning, among other matters, wastewater discharge,
air emissions, furnace dust disposal and disposal of auto fluff and other wastes.
As with similar mills in the industry, the Parent's, and SWVA's, furnaces are
classified as generating hazardous waste because they produce certain types
of dust containing lead, zinc and cadmium. Near the end of fiscal year 1996,
the Parent began treating a portion of its electric arc furnace dust, a hazardous
substance, utilizing its own stabilization process. Significant savings are
being realized as this process replaces off-site and more expensive treatment
methods that had been used through a contract with an approved waste disposal
firm. SWVA currently collects and handles its furnace waste through contracts
with a company which reclaims, from the waste dust, certain materials and recycles
or disposes of the remainder. Shredded Products operates an approved landfill
for use in disposal of its waste products associated with its auto shredding
operations. The Registrant believes it is in substantial compliance with applicable
federal, state and local regulations. However, future changes in regulations
may require expenditures which could adversely affect earnings in subsequent
years.
The Registrant
has constructed over the years pollution control equipment at a net aggregate
cost of over $9,900,000. Annual operating expenses and depreciation of all pollution
control equipment and waste disposal costs are in excess of $3,000,000 in the
aggregate. The Registrant is expected to spend approximately $10,000,000 for
additional pollution control and waste disposal equipment and facilities during
subsequent fiscal years. Adoption of the Clean Air Act Amendments of 1990, or
any other environmental concerns, is not anticipated to have a materially adverse
effect on the Registrant's operations, capital resources or liquidity, nor should
any incremental increase in capital expenditures occur due to the Act.
See Note 8,
"Commitments and Contingent Liabilities", in Notes to Consolidated Financial
Statements contained in the Registrant's 2001 Annual Report to Stockholders,
filed as an Exhibit to this Form 10-K.
(xiii) At
October 31, 2001, the Registrant employed 493 persons at its Roanoke plant,
with no employment at its Salem division, idle since mid-1991. The Registrant's
subsidiaries, Steel of West Virginia, Inc., John W. Hancock, Jr., Inc., Socar,
Incorporated, Shredded Products Corporation and RESCO Steel Products Corporation
employed 424, 287, 266, 59 and 44 persons, respectively.
PART I
(con'd.)
(d) Financial Information about Foreign and Domestic Operations and Export Sales.
When the Registrant's billet production exceeds its required needs, this semi-finished product is offered for sale. During past years, a portion of the excess billets has been sold to brokers who represent foreign purchasers. During fiscal years 1999, 2000 and 2001, the Registrant did not make any foreign sales of excess billets. However, the SWVA subsidiary sold a small percentage of its products to foreign markets during these years. The information required by this paragraph by geographical area, as to foreign and domestic operations, is not provided since it is identical to the table in paragraph (b) with virtually all information pertaining to the United States.
ITEM 2. PROPERTIES
The
Registrant owns 72 acres situated in the City of Roanoke, Virginia, which comprises
its main plant, of which 25 acres are used to provide 364,500 square feet of
manufacturing space with an annual billet capacity of approximately 650,000
tons and rolling mill capacity of 400,000 tons. A 30 acre site is owned in Salem,
Virginia, of which 10 acres were used to provide 51,355 square feet of manufacturing
space, until March 1991, when the plant was idled. The Registrant acquired in
1991 a 447 acre tract of land in Franklin County, Virginia, 100 acres of which
were transferred to Shredded Products Corporation in a move of shredding operations
from its Montvale location. Part of this new Shredded Products property is being
used as an approved industrial landfill. The remaining 347 acres of this land,
130 acres of which were sold in 1995, 1997, 1998, 1999 and 2001, is being marketed
as an industrial park for Franklin County.
Shredded
Products Corporation operates in both Montvale and Rocky Mount, Virginia. The
Montvale plant is situated on a 75 acre site owned by the Registrant, approximately
20 acres of which are regularly used in its scrap processing operation, with
an annual production capacity of approximately 24,000 tons. The Rocky Mount
facility is located on a 100 acre site owned by Shredded Products Corporation,
partially consisting of a 25 acre industrial landfill used for the disposal
of its auto fluff, and another 25 acres of which are regularly used in its shredding
operation, with an annual production capacity of approximately 150,000 tons.
John
W. Hancock, Jr., Inc. is located in Roanoke County near Salem, Virginia. The
plant is situated on a 37 acre site owned by Hancock, Inc., 17 acres of which
are regularly used in its operations. Buildings on the site contain 131,614
square feet of floor space.
Socar,
Incorporated and its subsidiary are located in Florence, South Carolina, and
in Continental, Ohio. The Florence facility is located on a 28 acre site owned
by Socar, Incorporated, 16 acres of which are regularly used in its operations.
Buildings on the site contain 93,359 square feet of floor space. The plant located
on a 32 acre site in Continental, Ohio, owned by Socar, Incorporated, has 86,400
square feet of floor space in manufacturing buildings, situated on 8 acres regularly
used in its operations.
PART I
(con'd.)
RESCO Steel Products Corporation operates from a building containing 43,340
square feet of floor space, located in Salem, Virginia, on a 7 acre site owned
by RESCO.
Steel
of West Virginia, Inc. and its subsidiary are located in Huntington, West Virginia
and in Memphis, Tennessee. The Huntington facility is located on a 42 acre site
owned by SWVA, most of which are regularly used in its operations. Buildings
on the site contain 558,175 square feet of manufacturing space with an annual
billet capacity of approximately 280,000 tons and rolling mill capacity of 300,000
tons. The plant located in Memphis, Tennessee owned by SWVA operates in 41,000
square feet of manufacturing space on approximately 4 acres.
The
various buildings are of modern design, well-maintained, and suitable and adequate
for the requirements of the business.
ITEM 3. LEGAL PROCEEDINGS
None.
See Note 8, "Commitments and Contingent Liabilities", in Notes to Consolidated Financial Statements contained in the Registrant's 2001 Annual Report to Stockholders, filed as an Exhibit to this Form 10-K.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
There were no matters submitted to a vote of stockholders during the fourth quarter of the fiscal year covered.
EXECUTIVE OFFICERS OF THE REGISTRANT
Pursuant to General Instruction G(3) of Form 10-K, the
following list is included as an unnumbered Item in Part I of this report in
lieu of being included in the Proxy Statement for the Annual Meeting of
Shareholders to be held on February 19, 2002.
The
names, ages and positions of all of the executive officers of the Registrant
as of October 31, 2001 are listed below with their business experience with
the Registrant for the past five years. Officers are elected annually by the
Board of Directors at the first meeting of directors following the annual meeting
of shareholders. There are no family relationships among these officers, nor
any agreement or understanding between any officer and any other person pursuant
to which the officer was selected.
Thomas J. Crawford, 46, has served as Secretary of the
Registrant since January 1985 and as Vice President-Administration since
February 1998; prior thereto, he had served as Assistant Vice President
since January 1993, as Manager of Inside Sales since 1984
and as a Sales Representative since 1977. He has 24 years of service with the
Registrant.
PART I
(con'd.)
Timothy
R. Duke, 50, has served as President and Chief Executive Officer of Steel of
West Virginia, Inc. ("SWVA"), a wholly-owned subsidiary of the Registrant, since
July 1997; prior thereto, he had served as President and Chief Operating Officer
of SWVA since October 1996 and as Vice President, Treasurer and Chief Financial
Officer of SWVA since February 1988. He has 14 years of service with SWVA.
Donald
R. Higgins, 56, has served as Vice President - Sales of the Registrant since
January 1986; prior thereto, he had served as General Sales Manager since 1984
and Assistant Sales Manager since 1978. He has 36 years of service with the
Registrant.
John
E. Morris, 60, has served as Vice President - Finance of the Registrant since
October 1988 and as Assistant Treasurer since 1985; prior thereto, he had served
as Controller since 1971. He has 30 years of service with the Registrant.
Donald
G. Smith, 66, has served as Chairman of the Board of the Registrant since February
1989, as Chief Executive Officer since November 1986, as President and Treasurer
since January 1985 and as Director of the Registrant since April 1984; prior
thereto, he had served as Vice President - Administration since September 1980
and as Secretary since January 1967. He has 44 years of service with the Registrant.
FORWARD-LOOKING STATEMENTS
From
time to time, the Registrant may publish forward-looking statements relating
to such matters as anticipated financial performance, business prospects, technological
developments, new products, research and development activities and similar
matters. The Private Securities Litigation Reform Act of 1995 provides a safe
harbor for forward-looking statements. In order to comply with the terms of
the safe harbor, the Registrant notes that a variety of factors could cause
the Registrant's actual results and experience to differ materially from the
anticipated results or other expectations expressed in the Registrant's forward-looking
statements. The risks and uncertainties that may affect the operations, performance,
development and results of the Registrant's business include economic and industry
conditions, availability and prices of supplies, prices of steel products, domestic
and foreign competition, governmental regulations, interest rates, inflation,
labor relations, environmental concerns, and others.
PART II
ITEM 5. MARKET FOR THE REGISTRANT'S COMMON EQUITY AND
RELATED
STOCKHOLDER MATTERS
The specific information required by this item is incorporated by reference to the information under the heading "Stock Activity" in the 2001 Annual Report to Stockholders. The Registrant did not, during fiscal year 2001, make any sale of securities not registered under the Securities Act of 1933.
ITEM 6. SELECTED FINANCIAL DATA
The specific information required by this item is incorporated by reference to the information under the heading "Selected Financial Data" in the 2001 Annual Report to Stockholders.
ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL
CONDITION
AND
RESULTS OF OPERATIONS
The specific information required by this item is incorporated by reference to the information under the heading "Management's Discussion and Analysis of Financial Condition and Results of Operations" in the 2001 Annual Report to Stockholders.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
The specific information required by this item is incorporated by reference to the information under the headings "Notes to Consolidated Financial Statements" and "Management's Discussion and Analysis of Financial Condition and Results of Operations" in the 2001 Annual Report to Stockholders.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The specific information required by this item is incorporated by reference to the information under the headings "Independent Auditors' Report", "Consolidated Financial Statements" and "Notes to Consolidated Financial Statements" in the 2001 Annual Report to Stockholders.
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON
ACCOUNTING
AND
FINANCIAL DISCLOSURE
None.
PART III
ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT
The specific information required by this item is incorporated by reference to the information under the heading "Information Concerning Directors and Nominees" in the Proxy Statement dated December 26, 2001, as filed with the Securities and Exchange Commission (the "Commission"), or is included under the heading "Executive Officers of the Registrant" in Part I of this filing on Form 10-K. The disclosure required by Item 405 of Regulation S-K is not applicable.
ITEM 11. EXECUTIVE COMPENSATION
The specific information required by this item is incorporated by reference to the information under the headings "Executive Compensation", "Compensation and Stock Option Committee Report on Executive Compensation", "Performance Graph" and "Board of Directors and Committees -- Director Compensation" in the Proxy Statement dated December 26, 2001, as filed with the Commission.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT
The specific information required by this item is incorporated by reference to the information under the headings "Security Ownership of Certain Beneficial Owners" and "Security Ownership of Management" in the Proxy Statement dated December 26, 2001, as filed with the Commission.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
None.
PART IV
ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K
(a) The following documents are filed as a part of this report:
(1) The following financial statements filed as part of the 2001 Annual Report to Stockholders are incorporated herein by reference:
(a) Consolidated Balance Sheets
(b) Consolidated Statements of Stockholders' Equity and Comprehensive Earnings (Loss)
(c) Consolidated Statements of Earnings
(d) Consolidated Statements of Cash Flows
(e) Notes to Consolidated Financial Statements
(f) Independent Auditors' Report
Individual
financial statements of the Registrant are not being filed because the Registrant
is primarily an operating company and its subsidiaries do not have minority
equity interests and/or long-term indebtedness (including current portions)
to any person outside the consolidated group (excluding long-term indebtedness
which is collateralized by the Registrant by guarantee, pledge, assignment or
otherwise), in amounts which together exceed 5 percent of the total consolidated
assets.
PART IV
(con'd.)
(2) Pursuant to Regulation S-K, the following Exhibit Index is added immediately preceding the exhibits filed as part of the subject Form 10-K:
EXHIBIT INDEX
EXHIBIT NO. | EXHIBIT | PAGE |
(3) | (a) Articles of Incorporation, as amended | 20 |
Incorporated by reference | ||
(b) By-Laws, as amended | 21 | |
(4) | Instruments Defining the Rights of Security Holders | 22 |
(10) | *(a) Executive Officer Incentive Arrangement | 23 |
Incorporated by reference | ||
*(b) Roanoke Electric Steel Corporation | ||
Employees' Stock Option Plan | 23 | |
Incorporated by reference | ||
*(c) Roanoke Electric Steel Corporation | ||
Non- Employee Directors' Stock Option Plan | 23 | |
Incorporated by reference | ||
*(d) Roanoke Electric Steel Corporation Severance Agreements | 23 | |
Incorporated by reference | ||
*(e) SWVA Collective Bargaining Agreement | 23 | |
Incorporated by reference | ||
*(f) SWVA Employee Agreement with Timothy R. Duke | 23 | |
Incorporated by reference | ||
(13) |
2001 Annual Report to Stockholders |
24 |
(21) | Subsidiaries of the Registrant | 25 |
(23) | Independent Auditor's Consent | 26 |
(b) Reports on Form 8-K.
There were no reports on Form 8-K filed by the Registrant during the last quarter of the fiscal period covered by the Annual Report.
* Management contract, or compensatory
plan or agreement, required to be filed as an Exhibit to this
Form 10-K pursuant to Item 14 (c).
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
ROANOKE ELECTRIC STEEL CORPORATION | |
Registrant | |
By: Donald G. Smith | |
Donald G. Smith, Chairman, President, | |
Treasurer and Chief Executive Officer | |
(Principal Executive Officer, Principal | |
Financial Officer and Director) |
Date: January 15, 2002
Pursuant
to the requirements of the Securities Exchange Act of 1934, this report has
been signed below by the following persons on behalf of the Registrant and in
the capacities and on the dates indicated.
Name and Title | Date | |
Donald G. Smith | January 15, 2002 | |
Donald G. Smith, Chairman, President, | ||
Treasurer and Chief Executive Officer | ||
(Principal Executive Officer, Principal | ||
Financial Officer and Director) | ||
John E. Morris | January 15, 2002 | |
John E. Morris, Vice President - Finance | ||
and Assistant Treasurer (Principal | ||
Accounting Officer) | ||
George B. Cartledge, Jr. | January 15, 2002 | |
George B. Cartledge, Jr. Director | ||
Thomas L. Robertson | January 15, 2002 | |
Thomas L. Robertson Director | ||
Charles I. Lunsford, II | January 15, 2002 | |
Charles I. Lunsford, II Director | ||
Paul E. Torgersen | January 15, 2002 | |
Paul E. Torgersen Director |
EXHIBIT NO. 3 (a)
ARTICLES OF INCORPORATION, AS AMENDED
Incorporated
by reference to the previously filed Form 10-K for October 31, 1996 on file
in the Commission office.
EXHIBIT NO. 3 (b)
BY-LAWS, AS AMENDED
BY-LAWS
OF
ROANOKE ELECTRIC STEEL CORPORATION
ARTICLE I
Offices
The principal office and place of business of the Corporation shall be in the County of Roanoke, State of Virginia, and the post office address of the Corporation shall be in the City of Roanoke, State of Virginia.
ARTICLE II
Stockholders
Section 1 - Annual Meeting - The annual meeting of the Stockholders of the Corporation shall be held on the third Monday in January of each year.
Section 2 - Special Meetings - Special meetings of the Stockholders may be called by the President and shall be called by the President or Secretary at the request in writing of a majority of the Board of Directors, or at the request in writing by Stockholders owning a majority in amount of the entire capital stock of the Corporation issued and outstanding and entitled to vote.
Section 3 - Notice and Place of Meetings - The Secretary shall cause written notice of the time and place of the holding of each annual or special meeting to be mailed, at least ten (10) days prior to such meeting, to each Stockholder entitled to vote, to the post office address of record with the Corporation. Notice of special meetings of the Stockholders shall state the purpose or purposes of such meetings. Meetings shall be held at such place in the City or County of Roanoke as may be designated in the notice.
Section 4 - Quorum - At any meeting of the Stockholders, the holders of a majority of the shares of the capital stock of the Corporation, issued and outstanding and entitled to vote, present in person or represented by proxy, shall represent a quorum of the Stockholders for all purposes.
If the holders of the amount of stock necessary to constitute a quorum shall fail to attend, in person or by proxy, at the time and place of meeting, the Chairman of the meeting may adjourn such meeting from time to time without notice, other than by announcement at the meeting, until holders of the amount of stock requisite to constitute a quorum shall attend. At any such adjourned meeting, at which a quorum be present, any business may be transacted which might have been transacted at the meeting as originally called.
Section 5 - Organization - The President, and in his absence, the Vice-President, shall call all of the meetings of the Stockholders to order and shall act as Chairman of such meetings. In the absence of the President and Vice-President, the Board of Directors shall appoint any stockholder to act as Chairman of such meeting. The Secretary of the Corporation shall act as Secretary of all meetings of the Stockholders, and in the absence of the Secretary, the presiding officer may appoint any person to act in such capacity.
Section 6 - Voting - At each meeting of the Stockholders, every Stockholder shall be entitled to vote in person or by proxy appointed by an instrument in writing, subscribed by such Stockholder, or by his duly authorized attorney, and delivered to the Secretary at the meeting, and he shall have one vote for each share of stock entitled to vote and registered in his name at the time of taking the list of Stockholders for such meeting. No share of stock shall be voted at any election which shall have been transferred on the books of the Corporation within twenty (20) days next preceding such election. Upon the demand of any Stockholder, the vote upon any question before the meeting shall be by ballot.
It shall be the duty of the Secretary to prepare, at least ten (10) days before every meeting, a complete list of the Stockholders entitled to vote, arranged in alphabetical order and indicating the number of shares held by each. Such list shall be open for inspection by any Stockholder at the principal place of business of the Corporation during business hours for the ten (10) days preceding the meeting.
Section 7 - Inspectors - At each meeting of the Stockholders, one (1) or more inspectors of election may be appointed by the presiding officer. It shall be the duty of the inspectors of election to count and certify to the Secretary the results of all votes at such meeting. In the absence of the appointment of such inspector or inspectors, the Secretary shall perform such duties.
Section 8 - Order of Business - At meetings of the Stockholders, the order of business shall be:
(1) Calling of roll.
(2) Proof of due notice of meeting or of waiver of notice.
(3) Reading and disposal of unapproved minutes.
(4) Reports of officers and committees.
(5) Election of Directors.
(6) Unfinished business.
(7) New business.
(8) Adjournment.
ARTICLE III
Board of Directors
Section 1 - Number and Term of Office - The business and property of the Corporation shall be managed and controlled by a Board of not less than five, nor more than nine Directors. The Directors shall be elected by ballot, by a majority of the Stockholders present and voting in person or by proxy, at each annual meeting of the Stockholders, and shall be elected to serve for a term of one (l) year and until their successors shall be elected and shall qualify.
Section 2 - Vacancies - In case of any vacancy in the Board of Directors through death, resignation, disqualification or other cause, the remaining Directors, by an affirmative vote of the majority thereof, may elect a successor to hold office for the unexpired portion of the term.
Section 3 - Annual Meetings - The annual meeting of the Board of Directors of the Corporation shall be held on the second Tuesday following the annual meeting of the Stockholders of the Corporation.
Section 4 - Special Meetings - Special meetings of the Board of Directors shall be held whenever called by the direction of its Chairman or the President, or by one-third in number of the Directors then in office.
Section 5 - Time, Place and Notice of Meetings - The Secretary shall cause written notice of the time and place of the holding of each annual or special meeting to be mailed, at least ten (10) days prior to the date of such meeting, to each Director to the post office address of record with the Corporation.
Section 6 - Quorum - A majority of the Board of Directors shall constitute a quorum for the transaction of business, but if at any meeting of the Board, there be less than a quorum present, a majority of those present shall adjourn the meeting from time to time.
Section 7 - Election and Salaries of Officers - The Directors shall elect the officers of the Corporation and fix their salaries.
Section 8 - Order of Business - At meetings of the Board of Directors, the order of business shall be:
(1) Calling of roll.
(2) Proof of due notice of meeting or of waiver of notice.
(3) Reading and disposal of any unapproved minutes.
(4) Reports of officers and committees.
(5) Election of officers.
(6) Unfinished business.
(7) New business.
(8) Adjournment.
ARTICLE IV
Section 1 - Officers - The officers of the Corporation shall be a Chairman of the Board of Directors, a President, a Vice-President, a Secretary and a Treasurer. Any two or more of such offices, other than those of President and Secretary, may be held by one person. The Board of Directors may, in its discretion, elect more than one Vice-President, and an Assistant Secretary and Assistant Treasurer. The officers shall be elected at each annual meeting of the Board of Directors and shall be elected to serve for a term of one (1) year or until removed by a majority vote of the entire Board of Directors.
Section 2 - Powers and Duties of Officers
(a) The Chairman of the Board of Directors shall preside at all meetings of the Board of Directors.
(b) President - The President shall be elected from the Board of Directors and shall preside at all meetings of the Stockholders, and, in the absence of the Chairman of the Board of Directors, at all meetings of the Directors. He shall have power to sign certificates of stock, to sign and execute all contracts, deeds, leases and other documents, and to sign checks, drafts, notes and orders for the payment of money, and to appoint, discharge and fix the salaries of agents and employees. He shall have general and active management of the business of the Corporation and shall perform all of the duties incident to the office of President.
(c) Vice-President - The Vice-President, or Vice-Presidents, shall have such powers and perform such duties as may be delegated to him or them by the Board of Directors. In the absence or disability of the President, the senior Vice-President may perform the duties and exercise the powers of the President.
(d) Treasurer and Assistant Treasurer - The Treasurer shall have custody of all funds and securities of the Corporation and shall keep a full and accurate account of all monies received and paid by him on account of the Corporation. He shall have power to sign all checks, drafts, notes and orders for the payment of money and shall perform all acts incident to the position of Treasurer, subject to the control of the Board of Directors. The Assistant Treasurer shall have such powers and duties as may be delegated to him by the Board of Directors and, in the absence or disability of the Treasurer, may perform the duties and exercise the powers of the Treasurer.
(e) Secretary and Assistant Secretary - The Secretary shall keep the minutes of all meetings of the Board of Directors and Stockholders, and shall give and serve all notices. The Secretary shall attest and countersign all contracts, deeds, leases and other documents where necessary, and shall have charge and custody of the seal, and of the stock certificate books, transfer books and stock ledgers of the Corporation, and shall, in general, perform all duties usually incident to the office of Secretary. The Assistant Secretary shall have such powers and duties as may be delegated to him by the Board of Directors and, in the absence or disability of the Secretary, may perform the duties and exercise the powers of the Secretary.
ARTICLE V
Capital Stock, Dividends and Seal
Section 1 - Certificates of Shares - The certificates for the shares of the capital stock of the Corporation shall be in such form as may be approved by the Board of Directors. The certificates shall be signed by the President and the Secretary or Treasurer of the Corporation and shall be consecutively numbered. The name of the person owning the shares represented by each certificate, with the number of such shares and the date of issue, shall be entered on the Corporation's books. The Corporation may treat the holder of record of any share or shares of stock as the holder-in-fact thereof, and shall not be bound to recognize any claim to or interest in any such share on the part of any other person.
Section 2 - Transfer of Shares - Shares of the capital stock of the Corporation shall be transferable by the holder thereof in person, or by his duly authorized attorney, upon surrender and cancellation of certificates for a like number of shares properly endorsed.
Section 3 - Regulations - The Board of Directors shall have power and authority to make all such rules and regulations as they may deem expedient concerning the issue, transfer and registration of certificates for the shares of stock of the Corporation.
Section 4 - Dividends - The Board of Directors may declare dividends from the surplus of the Corporation or from the net profits from the operation of its business at such times and in such amounts as the Board, in its sole discretion, may determine. Before the payment of any dividend or the distribution of any profits, there may be set aside out of the surplus or net profits arising out of the operation of the business of the Corporation, such sum or sums as the Directors from time to time think proper, either as working capital, a reserve fund to meet contingencies, for the repair and maintenance of the property of the Corporation, or for such other purposes as the Directors shall think conducive to the interests of the Corporation.
Section 5 - Corporate Seal - The corporate seal shall have inscribed thereon the name of the Corporation, the year of its organization, and the words "Corporate Seal" and "Virginia".
Section 6 - Fiscal Year and Financial Statements - The fiscal year of the Corporation shall begin on the first day of November and terminate on the 31st day of October in each year. The Board of Directors shall publish and submit to the Stockholders, along with the notice of the time and place of the annual meeting, an operating statement of the Corporation for the preceding fiscal year and a consolidated balance sheet showing the assets and liabilities of the Corporation at the end of the preceding fiscal year.
ARTICLE VI
Amendment of By-Laws
The By-Laws of the Corporation may be amended at any annual or special meeting of the Corporation by a vote of the holders of a majority of the shares of the capital stock of the Corporation issued and outstanding and entitled to vote, present in person or represented by proxy.
John W. Hancock, Jr.
President
ATTEST:
Elizabeth B. Hancock
Secretary
WAIVER OF NOTICE
We, the undersigned, being all of the members of the Board of Directors of Roanoke Electric Steel Corporation, hereby waive notice of the first meeting of the Board of Directors to be held at the offices of Roanoke Iron and Bridge Works in the City of Roanoke, Virginia at 4 p.m. o'clock on the 27th day of April, 1955, and consent to the transaction of all business that may properly come before such meeting.
DATED at Roanoke, Virginia this 27th day of April, 1955.
John W. Hancock, Jr.
O.D. Oakey, Jr.
S. Colston Sneed, Jr.
B.W. Morris
Charles P. Lunsford
A. Blair Antrim
John M. Donalson
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1 - 3(n), Code of Virginia, 1950, as amended, Roanoke Electric Steel Corporation executes Articles of Amendment to its By-Laws as follows:
(a) The name of the Corporation is ROANOKE ELECTRIC STEEL CORPORATION.
(b) The amendment so adopted amends Article VI of the By-Laws to read as follows:
"The Corporation shall indemnify each director and officer of the Corporation, his heirs, executors, administrators and personal representatives, against any and all liabilities, judgments, fines, penalties and claims (including amounts paid in settlement) imposed upon or asserted against him by reason of his being or having been an officer or director of the Corporation or of any other corporation in which he served or serves as a director or officer pursuant to the written request of the Corporation (whether or not he continues to be an officer or director at the time of such imposition or assertion), and against all expenses (including counsel fees) reasonably incurred by him in connection therewith, except in respect of matters as to which he shall have been finally adjudged to be liable by reason of having been guilty of negligence or misconduct in the performance of his duty as such director or officer. In the event of any other judgment against such officer or director or in the event of a settlement, the indemnification shall be made only if the Corporation shall be advised (a) by the Board of Directors, in case none of the persons involved shall then be a director of the Corporation, or (b) by independent counsel appointed by the Board of Directors, in case any of the persons involved shall then be a director of the Corporation, that in its or his opinion, as the case may be, such director or officer was not guilty of negligence or misconduct in the performance of his duty, and, in the event of a settlement, that such settlement was, or, if still to be made, would be, in the best interests of the Corporation. If the determination is to be made by the Board of Directors, it may rely, as to all questions of law, upon the advice of independent counsel. The foregoing right of indemnification shall not be exclusive of other rights to which any director or officer may be entitled as a matter of law or otherwise."
(c) The meeting of the Board of Directors at which the amendment was found to be in the best interests of the Corporation and directed to be submitted to a vote at a meeting of stockholders was held on the 18th day of October, 1967. Notice was given to each stockholder of record entitled to vote on the 15th day of December, 1967, such notice being given more than twenty-five and less than fifty days before the date of the meeting and was given in the manner provided in this Act, and was accompanied by a copy of the proposed amendment; the date of the adoption of the amendment by the stockholders was the 15th day of January, 1968.
(d) The number of shares outstanding and the number of shares entitled to vote on the amendment was 560,000 shares; all shares being common stock of no par value, there was no class entitled to vote thereon as a class.
(e) The number of shares present in person or by proxy voted for the amendment was 441,265 shares and none against such amendment.
(f) Such amendment does not effect a change in the amount of stated capital.
(g) Such amendment does not effect a restatement of the Articles of Incorporation.
Witness the signature of Roanoke Electric Steel Corporation,
by its President, with the corporate seal affixed and attested by the Secretary
thereof, this 20th day of January, 1968.
ROANOKE ELECTRIC STEEL CORPORATION
BY William M. Meador
President
ATTEST:
Donald G. Smith
Secretary
STATE OF VIRGINIA
)
)
To-Wit:
COUNTY OF ROANOKE )
I, Paul D. Sturgill, a Notary Public in and for the County of Roanoke, State of Virginia, do hereby certify that William M. Meador, and Donald G. Smith, President and Secretary respectively of Roanoke Electric Steel Corporation, have this day personally appeared before me and executed the foregoing Articles of Amendment, and made oath that the matters therein stated are true and correct.
Given under my hand this 20th day of January, 1968. My commission expires April 4, 1968.
Paul
D. Sturgill
Notary
Public
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1 - 24, Code of Virginia, 1950, as amended, Roanoke Electric Steel Corporation executes Articles of Amendment to its By-Laws as follows:
(a) The name of the Corporation is ROANOKE ELECTRIC STEEL CORPORATION.
(b) The amendment so adopted adds a new by-law, which would be new Article VII, to read as follows:
"The power to alter, amend or repeal the By-laws or adopt new by-laws shall be vested in the Board of Directors. But by-laws made by the Board of Directors may be repealed or changed, and new by-laws made, by the stockholders and the stockholders may prescribe that any by-law made by them shall not be altered, amended or repealed by the Directors."
(c) The meeting of the Board of Directors at which the amendment was found to be in the best interests of the Corporation and directed to be submitted to a vote at a meeting of stockholders was held on the 18th day of October, 1967. Notice was given to each stockholder of record entitled to vote on the 15th day of December, 1967, such notice being given more than twenty-five and less than fifty days before the date of the meeting and was given in the manner provided in this Act, and was accompanied by a copy of the proposed amendment; the date of the adoption of the amendment by the stockholders was the 15th day of January, 1968.
(d) The number of shares outstanding and the number of shares entitled to vote on the amendment was 560,000 shares; all shares being common stock of no par value, there was no class entitled to vote thereon as a class.
(e) The number of shares present in person or by proxy voted for the amendment was 441,265 shares and none against such amendment.
(f) Such amendment does not effect a change in the amount of stated capital.
(g) Such amendment does not effect a restatement of the Articles of Incorporation.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 20th day of January, 1968.
ROANOKE ELECTRIC STEEL CORPORATION
BY
William M. Meador
President
ATTEST:
Donald G. Smith
Secretary
STATE OF VIRGINIA
)
)
To-Wit:
COUNTY OF ROANOKE )
I, Paul D. Sturgill, a Notary Public in and for the County of Roanoke, State of Virginia, do hereby certify that William M.Meador, and Donald G. Smith, President and Secretary respectively of Roanoke Electric Steel Corporation, have this day personally appeared before me and executed the foregoing Articles of Amendment, and made oath that the matters therein stated are true and correct.
Given under my hand this 20th day of January, 1968. My commission expires April 4, 1968.
Paul
D. Sturgill
Notary
Public
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-24 of the Code of Virginia and Article VII of the By-Laws of Roanoke Electric Steel Corporation, The Board of Directors of Roanoke Electric Steel Corporation hereby amends the By-Laws of the Corporation as follows:
(a) Section 2 of Article V is amended by inserting "(subject to such restrictions as may be placed upon the transfer of shares under the terms of the following section)" between "transferable" and "by".
(b) Section 3 of Article V is amended by adding to the end of such section the following sentence: "The Board of Directors may place such restrictions upon the transferability of all or part of the shares of the capital stock of the Corporation as may be necessary in the opinion of the Board to insure that any issue of stock by the Corporation will comply with applicable federal and state securities laws and with the terms of any agreement of merger or other corporate reorganization duly approved by the Board."
(c) The meeting of the Board of Directors at which the amendment was found to be in the best interest of the Corporation was held on the 19th day of August, 1975.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 19th day of August, 1975.
ROANOKE
ELECTRIC STEEL CORPORATION
By
William M. Meador
President
ATTEST:
Donald G. Smith
Secretary
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-24 of the Code of Virginia and Article VII of the By-Laws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its By-Laws as follows:
(a) The name of the Corporation is ROANOKE ELECTRIC STEEL CORPORATION.
(b) The amendment so adopted amends Section 1 of Article III to read as follows:
"The business and property of the Corporation shall be managed and controlled by a Board of not less than five, nor more than ten Directors. The Directors shall be elected by ballot, by a majority of the Stockholders present and voting in person or by proxy, at each annual meeting of the Stockholders, and shall be elected to serve for a term of one (1) year and until their successors shall be elected and shall qualify."
(c) The meeting of the Board of Directors at which the amendment was found to be in the best interest of the Corporation was held on the 16th day of September, 1975.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 16th day of September, 1975.
ROANOKE ELECTRIC STEEL CORPORATION
By
William M. Meador
President
ATTEST:
Donald G. Smith
Secretary
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-24 of the Code of Virginia and Article VII of the By-Laws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its By-Laws as follows:
(a) The name of the Corporation is ROANOKE ELECTRIC STEEL CORPORATION.
(b) The amendment so adopted amends Section 1 of Article III to read as follows:
"The business and property of the Corporation shall be managed and controlled by a Board of not less than five, nor more than eleven Directors. The Directors shall be elected by ballot, by a majority of the Stockholders present and voting in person or by proxy, at each annual meeting of the Stockholders, and shall be elected to serve for a term of one (1) year and until their successors shall be elected and shall qualify."
(c) The meeting of the Board of Directors at which the amendment was found to be in the best interest of the Corporation was held on the 17th day of April 1984.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 17th day of April 1984.
ROANOKE ELECTRIC STEEL CORPORATION
By
William M. Meador
President
ATTEST:
Donald G. Smith
Secretary
ARTICLES OF AMENDMENT TO BYLAWS
OF
ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-24 of the Code of Virginia and Article VII of the Bylaws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation hereby executes and approves these Articles of Amendment to its Bylaws as follows:
(a) Article III, "Board of Directors", is hereby amended by the addition of Section 9 as follows:
Section 9 - Executive Committee and Other Committees
The Board of Directors of the Corporation, by resolution adopted by a majority of the Directors in office, may designate an Executive Committee and/or such other committees as from time to time shall be deemed necessary and appropriate. The Executive Committee shall be composed of two or more Directors of the Corporation, appointed by the Board of Directors, and, to the extent provided in such resolution, shall have and exercise all of the authority of the Board of Directors except to approve an amendment of the Articles of Incorporation, a plan of merger or consolidation, a plan of exchange under which the Corporation would be acquired, the sale, lease or exchange, or the mortgage or pledge of for a consideration other than money, of all or substantially all of the property and assets of the Corporation otherwise than in the ordinary and regular course of business, the voluntary dissolution of the Corporation, or revocation of voluntary dissolution proceedings. Other committees consisting of two or more Directors, appointed by the Board of Directors, may be designated by resolution adopted by a majority of the Directors present at a meeting at which a quorum is present. Upon designation of any committee, including the Executive Committee, the Board of Directors shall appoint a chairman thereof.
(b) A meeting of the Board of Directors at which this Amendment was found to be in the best interest of the Corporation was held January 29, 1985. A majority of the Board of Directors then in office voted in favor of the Amendment.
WITNESS the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary of, this 29th day of January, 1985.
ROANOKE ELECTRIC STEEL CORPORATION
By Donald G. Smith
Attest: Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT TO BYLAWS
OF
ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia, 1950, as amended, and Article VII of the Bylaws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation hereby executes and approves these Articles of Amendment to its Bylaws as follows:
(a) Article IV, Section 1 is hereby amended to read as follows:
Section 1 - Officers - The officers of the Corporation shall be a Chairman of the Board of Directors, a President, a Vice President, an Assistant Vice President, a Secretary and a Treasurer. The Board of Directors may, in its discretion, elect more than one Vice President, more than one Assistant Vice President, and an Assistant Secretary and Assistant Treasurer. The same individual may simultaneously hold more than one office in the Corporation. The officers shall be elected at each annual meeting of the Board of Directors for a term of one (1) year or until removed by a majority vote of the entire Board of Directors.
(b) Article IV, Section 2 (c) is hereby amended to read as follows:
(c) Vice President and Assistant Vice President - The Vice President(s) and Assistant Vice President(s) shall have the powers and perform such duties as may be delegated to him or them by the Board of Directors. In the absence or disability of the President, the senior Vice President may perform the duties and exercise the powers of the President.
(c) The meeting of the Board of Directors at which these Amendments were found to be in the best interest of the Corporation was held October 18, 1988. The majority of the Board of Directors then in office voted in favor of the Amendments. The Amendments were ratified by a majority of the Board of Directors at its meeting on November 15, 1988.
WITNESS the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 15th day of November, 1988.
ROANOKE ELECTRIC STEEL CORPORATION
By
Donald G. Smith
President
ATTEST:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT TO BYLAWS
OF
ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia, 1950, as amended, and Article VII of the Bylaws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation hereby executes and approves these Articles of Amendment to its Bylaws as follows:
(a) Section 1 of Article IV of the Bylaws is hereby amended in its entirety to read as follows:
"Section 1 - Officers - The officers of the Corporation shall be a Chairman of the Board of Directors, a President, a Vice President, an Assistant Vice President, a Secretary and a Treasurer and such other officers as the Board may by resolution appoint. The same individual may simultaneously hold more than one office in the Corporation. The Board of Directors may, in its discretion, elect more than one Vice President, more than one Assistant Vice President, and an Assistant Secretary and Assistant Treasurer. The officers shall be elected at each annual meeting of the Board of Directors and shall be elected to serve for a term of one (1) year or until removed by a majority vote of the entire Board of Directors."
(b) The meeting of the Board of Directors at which this Amendment was found to be in the best interests of the Corporation was held on November 16, 1993. The majority of the members of the Board of Directors then in office voted in favor of the Amendment.
WITNESS the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 16th day of November, 1993.
ROANOKE ELECTRIC STEEL CORPORATION
By: Donald G. Smith
President
ATTEST:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia and Article VII of the By-Laws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its By-Laws as follows:
(a) The name of the Corporation is Roanoke Electric Steel Corporation.
(b) The amendment so adopted (the "Amendment") amends Section 1 of Article II to read as follows:
"Section 1 - Annual Meeting - The annual meeting of the Stockholders of the Corporation shall be held on the third Tuesday in February of each year, or on such other date as the Board of Directors may determine."
(c) The Amendment also amends Section 3 of Article III to read as follows:
"Section 3 - Annual Meeting - The annual meeting of the Board of Directors of the Corporation shall be held immediately following the annual meeting of Stockholders, or at such other time as the Board of Directors may determine."
(d) The meeting of the Board of Directors at which the Amendment was found to be in the best interest of the Corporation was held on the 19th day of September, 1995.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 19th day of September, 1995.
ROANOKE ELECTRIC STEEL CORPORATION
By
Donald G. Smith
President
ATTEST:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia and Article VII of the By-Laws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its Bylaws as follows:
A. The name of the Corporation is Roanoke Electric Steel Corporation.
B. The Amendment so adopted (the "Amendment") amends Section 1 of Article III to read as follows:
"Section 1 - Number and Term of Office. The number of directors of the Corporation shall be nine. The directors shall be divided into three classes (A, B and C) as nearly equal in number as possible. The initial term of office for members of Class A shall expire at the annual meeting of stockholders in 1997; the initial term of office for members of Class B shall expire at the annual meeting of stockholders in 1998; and the initial term of office for members of Class C shall expire at the annual meeting of stockholders in 1999. At each annual meeting of stockholders following such initial classification and election, directors elected to succeed those directors whose terms expire after their election and shall continue to hold office until their respective successors are elected and qualify."
C. The Amendment also amends Section 2 of Article III to read as follows:
"Section 2 - Vacancies. Newly-created directorships resulting from an increase in the number of directors or any vacancies in the Board of Directors resulting from death, resignation, retirement, disqualification, removal from office, or other cause shall be filled by the affirmative vote of a majority of the directors then in office, whether or not a quorum. No decrease in the number of directors constituting the Board of Directors shall shorten the term of any incumbent director. A director may be removed from office only for cause."
D. The meeting of the Board of Directors at which the Amendment was found to be in the best interest of the Corporation was held on the 15 day of October, 1996.
WITNESS the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 15 day of October, 1996.
ROANOKE ELECTRIC STEEL CORPORATION
By
Donald G. Smith
President
Attest:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia and Article VII of the By-Laws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its Bylaws as follows:
A. The name of the Corporation is Roanoke Electric Steel Corporation.
B. The Amendment so adopted (the "Amendment") amends Section 1 of Article III to read as follows:
"Section 1 - Number and Term of Office. The number of directors of the Corporation shall be ten. The directors shall be divided into three classes (A, B, and C) as nearly equal in number as possible. The initial term of office for members of Class A shall expire at the annual meeting of stockholders in 1997; the initial term of office for members of Class B shall expire at the annual meeting of stockholders in 1998; and the initial term of office for members of Class C shall expire at the annual meeting of stockholders in 1999. At each annual meeting of stockholders following such initial classification and election, directors elected to succeed those directors whose terms expire after their election shall continue to hold office until their respective successors are elected and qualify."
C. The meeting of the Board of Directors at which the Amendmentwas found to be in the best interest of the Corporation was held on the 15 day of April, 1997.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 15 day of April, 1997.
ROANOKE ELECTRIC STEEL CORPORATION
By
Donald G. Smith
President
ATTEST:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT
TO BY-LAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia and Article VII of the By-Laws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its Bylaws as follows:
A. The name of the Corporation is Roanoke Electric Steel Corporation.
B. The Amendment so adopted (the "Amendment") amends Section 1 of Article III to read as follows:
"Section 1 - Number and Term of Office. The number of directors of the Corporation shall be eight. The directors shall be divided into three classes (A, B, and C) as nearly equal in number as possible. The initial term of office for members of Class A shall expire at the annual meeting of stockholders in 1997; the initial term of office for members of Class B shall expire at the annual meeting of stockholders in 1998; and the initial term of office for members of Class C shall expire at the annual meeting of stockholders in 1999. At each annual meeting of stockholders following such initial classification and election, directors elected to succeed those directors whose terms expire after their election shall continue to hold office until their respective successors are elected and qualify."
C. The meeting of the Board of Directors at which the Amendment was found to be in the best interest of the Corporation was held on the 17 day of March, 1998.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 17 day of March, 1998.
ROANOKE ELECTRIC STEEL CORPORATION
By Donald G. Smith
President
ATTEST:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT
TO BYLAWS OF
ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia and Article VII of the Bylaws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its Bylaws as follows:
A. The name of the Corporation is Roanoke Electric Steel Corporation.
B. The Amendment so adopted (the "Amendment") adds a new Section 9 to Article II of the Bylaws, which reads as follows:
C. The meeting of the Board of Directors at which the Amendment was found to be in the best interest of the Corporation was held on the 15 day of December, 1998.
WITNESS the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 15 day of December, 1998.
ROANOKE ELECTRIC STEEL CORPORATION
By
Donald G. Smith
President
Attest:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT
TO BYLAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia and Article VII of the Bylaws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its Bylaws as follows:
A. The name of the Corporation is Roanoke Electric Steel Corporation.
B. The Amendment so adopted (the "Amendment") amends Section 1 of Article III to read as follows:
C. The meeting of the Board of Directors at which the Amendment was found to be in the best interest of the Corporation was held on the 19 day of January, 1999.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 19 day of January, 1999.
ROANOKE ELECTRIC STEEL CORPORATION
By Donald G. Smith
President
ATTEST:
Thomas J. Crawford
Secretary
ARTICLES OF AMENDMENT
TO BYLAWS
OF ROANOKE ELECTRIC STEEL CORPORATION
Pursuant to Section 13.1-714 of the Code of Virginia and Article VII of the Bylaws of Roanoke Electric Steel Corporation, the Board of Directors of Roanoke Electric Steel Corporation executes Articles of Amendment to its Bylaws as follows:
A. The name of the Corporation is Roanoke Electric Steel Corporation.
B. The Amendment so adopted (the "Amendment") amends Section 1 of Article III to read as follows:
C. The meeting of the Board of Directors at which the Amendment was found to be in the best interest of the Corporation was held on the 18 day of December, 2001.
Witness the signature of Roanoke Electric Steel Corporation, by its President, with the corporate seal affixed and attested by the Secretary thereof, this 18 day of December, 2001.
ROANOKE ELECTRIC STEEL CORPORATION
By Donald G. Smith
President
ATTEST:
Thomas J.
Crawford
Secretary
EXHIBIT NO. 4
INSTRUMENTS DEFINING THE RIGHTS OF SECURITY HOLDERS
Pursuant
to Item 601(b) (4) (iii) of Regulation S-K, the Registrant hereby undertakes
to furnish to the Commission, upon request, copies of the instruments defining
the rights of holders of the long-term debt of Roanoke Electric Steel Corporation
and its subsidiaries described in its 2001 Annual Report to Stockholders and
Form 10-K.
EXHIBIT NO. 10
* (a)
EXECUTIVE OFFICER INCENTIVE ARRANGEMENT
Incorporated by reference to the previously filed Form 10-K for October 31, 1999 on file in the Commission office.
* (b)
ROANOKE ELECTRIC STEEL CORPORATION
EMPLOYEES' STOCK OPTION PLAN
Incorporated by reference to the previously filed Form 10-K for October 31, 1998 on file in the Commission office.
* (c)
ROANOKE ELECTRIC STEEL CORPORATION
NON-EMPLOYEE DIRECTORS' STOCK OPTION PLAN
Incorporated by reference to the previously filed Form 10-K for October 31, 1997 on file in the Commission office.
* (d)
ROANOKE ELECTRIC STEEL CORPORATION SEVERANCE AGREEMENTS
Incorporated by reference to the previously filed Form 10-K for October 31, 1996 on file in the Commission office.
* (e)
SWVA COLLECTIVE BARGAINING AGREEMENT
Incorporated by reference to the previously filed Form 10-Q for July 31, 1999 on file in the Commission office.
* (f)
SWVA EMPLOYMENT AGREEMENT WITH TIMOTHY R. DUKE
Incorporated by reference to the previously filed Form 10-Q for January 31, 1999 on file in the Commission office.
* Management contract, or compensatory
plan or agreement, required to be filed as an Exhibit to this Form 10-K pursuant
to Item 14 (c).
EXHIBIT NO. 13
2001 ANNUAL REPORT TO STOCKHOLDERS
EXHIBIT NO. 21
SUBSIDIARIES OF THE REGISTRANT
Registrant: | Roanoke Electric Steel Corporation | |
Subsidiary of Registrant | Organized Under Jurisdiction of | |
Shredded Products Corporation | Virginia | |
John W. Hancock, Jr., Inc. | Virginia | |
Socar, Incorporated | South Carolina | |
RESCO Steel Products Corporation | Virginia | |
Roanoke Technical Treatment and Services, Inc. | Virginia | |
Steel of West Virginia, Inc. | Delaware | |
EXHIBIT NO. 23
INDEPENDENT AUDITORS' CONSENT
Roanoke Electric Steel Corporation:
We consent to the incorporation by reference in Registration Statement Nos. 33-27359, 33-35243, 333-25299 and 333-49525 of Roanoke Electric Steel Corporation on Form S-8 of our report dated November 16, 2001, incorporated by reference in the Annual Report on Form 10-K of Roanoke Electric Steel Corporation for the year ended October 31, 2001.
Deloitte & Touche LLP
Raleigh, North Carolina
January 18, 2002